Trabajos industrial engineering en Austin, TexasCrear alertas

Amazon is seeking a highly experienced and hands-on Principal Manufacturing Engineer to lead the development and deployment of electronics manufacturing operations, with a focus on PCBA production and wire harness/cable assembly integration. This is a senior individual contributor role serving as the technical authority responsible for establishing world-class electronics manufacturing processes at production scale. The ideal candidate will bring 12+ years of progressive experience in electronics manufacturing environments, with deep expertise in SMT assembly, PCBA test, wire harness fabrication, and electronics integration into complex electromechanical systems. This individual must be capable of driving technical execution across cross-functional organizations while operating effectively in fast-paced, dynamic environments with demanding schedules. This role requires a combination of technical authority, influential leadership, strategic thinking, and hands-on problem-solving to support Amazon's manufacturing and operational objectives. Key job responsibilities Own the end-to-end electronics manufacturing line concept, design, requirements, process flow, equipment specification, automation strategy, facility integration, installation, commissioning, rate demonstration, and handover to operations teams. Own line requirements including layout, throughput, yield targets, cycle times, headcount, and Capex for both PCBA and wire harness production. Develop and validate robust manufacturing process parameters for SMT placement, reflow, wave solder, selective solder, conformal coating, wire termination, and cable assembly from prototype through full-rate production. Oversee detailed design of production systems; develop equipment specifications; identify vendors and manage the RFQ, selection, FAT, and deployment process for pick-and-place, reflow ovens, AOI/SPI, ICT/FCT, wire processing, and harness assembly equipment. Lead and manage project scope from concept through production launch. Own the handover process to sustaining teams. Partner with electrical engineering and product design teams to drive DFM considerations for PCBA layout, component selection, wire routing, connector strategy, and testability that enable production and cost targets. Drive PFMEA and OEE considerations as far upstream in product development as possible. Optimize for first-pass yield, minimal rework, and test coverage. Establish and standardize production processes, ESD controls, solder process windows, test strategies, control plans, and operational documentation. Drive continuous improvement using Lean Manufacturing, Six Sigma, and data-driven problem-solving to improve yield, reduce defects, and optimize cost structures. Lead strategic technical engagement with EMS partners, component suppliers, test equipment vendors, and wire harness manufacturers. Ensure compliance with IPC standards, ESD protocols, and product safety/regulatory requirements throughout the manufacturing process. Mentor and develop peers and junior engineers while fostering a culture of technical excellence, safety, and operational discipline. Bachelor's degree in Electrical Engineering, Manufacturing Engineering, or equivalent technical discipline. 12+ years of direct manufacturing engineering experience in electronics production environments (PCBA, wire harness, or electronics integration). Deep expertise in SMT assembly processes including stencil printing, component placement, reflow soldering, and inspection (AOI, SPI, X-ray). Demonstrated success leading commissioning, startup, and production ramp-up of integrated electronics manufacturing operations. Strong experience with electronics test strategy development and deployment (ICT, functional test, boundary scan, flying probe). Experience with wire harness design for manufacturing, cable assembly processes, termination methods, and continuity/hipot testing. Strong understanding of Lean Manufacturing principles and Six Sigma methodologies (Green Belt minimum; Black Belt preferred). Proven ability to influence and drive execution across cross-functional teams in complex industrial environments. Master's degree in Electrical Engineering or Manufacturing Engineering. IPC certifications (CID, CID+, or IPC-A-610/J-STD-001 expertise). Experience with flex PCB assembly, rigid-flex integration, or SMT-on-flex processes. Experience with high-density interconnect (HDI) boards, fine-pitch BGA/QFN assembly, or advanced packaging technologies. Experience with conformal coating, potting, encapsulation, or electronics protection processes for harsh environments. Experience supporting multi-site electronics production operations or new facility launches or expansions. Experience with complex electromechanical systems requiring distributed electronics across multiple interconnected assemblies. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at _. USA, TX, Austin - 163,400.00 - 221,000.00 USD annually

We’re looking for a Principal Electrical Engineer to spearhead electrical design for advanced manufacturing facilities infrastructure. This key role drives the development of next-generation facilities, delivering efficiently at Amazon's scale. If you excel in dynamic settings and relish tackling intricate challenges, here’s your opportunity to define sustainable energy’s future. In this capacity, you’ll serve as the principal electrical engineering leader, guiding design and engineering tasks that support infrastructure construction, from initial concept through to full production. Key job responsibilities -Build and lead the electrical team to execute all aspects of the electrical design -Oversee the complete electrical design process, guiding concept evaluations and final decisions that result in fully developed construction drawings ready for permitting and construction. -Own electrical engineering across the portfolio: distribution from utility interface to tools Lead the design of comprehensive low voltage and medium voltage power distribution systems, including MV switchgear, substation design, MV/LV transformers, low voltage switchgear and switchboards, panelboards, VFD, busway distribution, and critical power pathways -Interpret and implement NFPA-70, NEC standards for low and medium-voltage power system design and installation -Address and resolve design changes during construction -Collaborate with external Engineering, Procurement, and Construction firms throughout bid and project execution phases to verify that all designs and specifications align with our Engineering Standards. Lead and support both internal teams and third-party engineers to maintain project quality and compliance. Proactively share project requirements, updates, and status with both internal and external teams to keep everyone aligned. Guide and develop junior engineers through hands-on mentorship and professional growth opportunities. -Deliver comprehensive updates on design concepts and project progress during structured milestone reviews at the 30%, 60%, 90%, and IFC stages, engaging stakeholders and multidisciplinary teams to ensure strategic alignment and transparency. Deliver quantity take-offs and cost estimates for projects within tight deadlines while applying core engineering principles and a comprehensive electrical engineering toolkit to solve complex technical challenges. This approach drives the creation of innovative, detailed designs for diverse electrical and process systems. -Create comprehensive design packages including detailed basis of design documents, sequence of operations, and contract-ready construction drawings to guide accurate project execution and stakeholder alignment. Bachelor’s Degree in Electrical Engineering Active Professional Engineer (PE) license +15 years of professional expertise in designing and constructing electrical systems for large-scale manufacturing and industrial applications. Advanced knowledge of industrial and facilities electric infrastructure design, particularly at 5kV and 480V levels Extensive familiarity with electrical maintenance codes and safe work practices, including: NFPA 70 (NEC), NFPA 70E, IEEE 1584, NFPA 497 Proficient in the use of Revit, Revisto, and Navisworks Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at _. USA, TX, Austin - 163,400.00 - 221,000.00 USD annually

Job Description Electrical Senior Superintendent An Electrical Senior Superintendent is the primary jobsite supervisor with operational responsibility for employees involved in the installation, alteration, addition, and/or repair of electrical systems, conductors, and associated materials and equipment for large, typically ground up projects requiring complex coordination of multiple subordinate supervisors and crews. This level is capable of supervising large scale commercial projects with a minimum of 10 years total experience. Duties & Responsibilities • Oversee the implementation of Walker’s safety program, adherence to OSHA rules and regulations, and compliance with site-specific safety requirements for all Walker-related personnel, including employees, subcontractors, and visitors., • Participate in safety/incident investigations and reviews. Ensure timely responses and document actions/corrections., • Review all other safety-related documentation in a timely manner., • Coordinate and participate in all site-specific OSHA inspections, investigations, claims, as well as any other government inspection and licensing issues., • Provide leadership and direction to Superintends and Foreman. Ensure they are efficiently completing assigned duties., • Communicate frequently with company personnel and subcontractors. Ensure they understand the work, the planned approach and any potential problem areas (with a back-up plan)., • Assist in resolving construction problems (lack of productivity, work interfaces, material shortages, etc.)., • Maintain good relationships with inspectors, architects, engineers, subcontractors and other key people connected with the project., • Accompany inspectors on project reviews., • Establish ways to motivate and keep personnel/subcontractors/suppliers, service providers’ productivity and morale at a high level., • Provide initial client contact to assess scope of work, schedule and resources necessary to successfully complete a project., • Plan and organize a project under the directions of a Senior Project Manager or Division Manager., • Determine production sequence. Coordinate assigned work with work of different crafts, contractors and subcontractors., • Attend pre-construction and construction meetings., • Maintain and update the project forecast to ensure that materials have been ordered and scheduled for delivery., • Equipment has been requisitioned on a timely basis., • Personnel have been scheduled, and subs have been contacted and their schedules confirmed., • Establish project objectives, policies, procedures and performance standards within boundaries of corporate policies., • Monitor construction activities in conjunction with the Senior Project Manager, Superintendent, and Foreman to ensure project is being built on schedule, and within budget., • Oversee the preparation of any and all change quotations for presentation to the Client and/or General Contractor., • Ensure that all change orders are properly executed and indicated on as-built plans., • Assist in monthly costing reports under the supervision of a Senior PM or Division Manager., • Assist the Senior Project Manager with financial aspects of contracts (progress billing, rental equipment, income/expenses) to protect the company’s interest and simultaneously maintain good relationship with the client., • Investigate any potentially serious situations and implement corrective measures within company guidelines, and under supervision., • Review RFI logs continuously and identify any issues that might affect the project., • Liaison with engineering, estimating and planning to ensure work complies with drawings, specifications and schedule., • Liaison with other departments (logistics, purchasing, quality control, safety, engineering, etc.) to ensure all required materials, equipment, inspections, etc., support craft activities and project schedule., • Ensure all work being performed adheres to State Regulatory Code and Requirements., • Implement processes to improve productivity and product quality., • Oversee subcontractor productivity and ensure contractual obligations are honored., • Review inspection reports and document resolutions to deficiencies., • Code invoices, document additional work and back charges, maintain accurate as-built drawings and complete start-up and tool/equipment transfer forms., • Keep the progress schedule current. Assist Senior Project Manager in calculating percent completion on items for monthly invoicing and of labor for each job cost report. Competencies • Communication., • Critical Evaluation., • Relationship Management. Work Environment • This job operates in a client project environment with exposure to employee, subcontractors and trades. Skills and Specifications • Supervisory Skills, • Ability to schedule and multitask, • Knowledgeable in building and construction, • Problem solving aptitude, • Computer literate, • Attentive to detail, • Possess good communication skills Physical Demands • While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms., • This job operates in a client project environment with exposure to employee, subcontractors and trades., • Ability to freely access all points of a construction site in wide-ranging climates and environment, • Ability to comprehend forms in space and understand relationships of plane and solid objects. May be used in such tasks as blue print reading and in solving geometry problems. Frequently described as the ability to “visualize” objects of two and three dimensions, or to think visually of geometric forms., • Ability to manipulate materials and/or equipment up to 50 lbs. The frequency of manipulation if frequently., • Ability to move up or mount by using the hands or feet to include:, • Ladders - Step stool, 8' to 10' ladder, extension ladder, • Stairways - 3 or more flights, • To bend forward or down from the middle of the waist or the middle of the back, to bend, downwards, to lower oneself and/or to move freely on hands and knees between 20-50 times daily, • To stretch out, extend, or put forth a bodily part. To touch or grasp something, by extending or stretching. To touch, lift, hold or operate with the hands up to 50 times daily., • To perceive or comprehend by the sense of sight., • Characteristics are: Focus, Color perception or depth perception., • The ability to operate or convey in a vehicle, car, commercial vehicle Education and Qualifications • 10+ years of Electrical or Industrial Superintendent or related work experience, • Working knowledge of Microsoft Office, • High School Diploma or equivalent required, • Industry experience working with heavy construction infrastructure projects ranging from water and waste water treatment facilities, power plants, as well as data centers or other mission critical facilities preferred, • Strong organization, time management, and verbal/written communication skills, • Strong math and accounting skills, • Must possess strong decision making, problem solving, leadership and management abilities, • Familiarity with and ability to read and understand drawings and specifications, • Working knowledge of terms and conditions of project contracts, subcontracts, and purchase orders, • Ability to maintain discretion and confidentiality at all times, • Ability to work independently and as a member of a cross functional team, • Ability to travel as needed. Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. \nCompany Description Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio. We have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project. Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio.\r\n\r\n\r\nWe have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. The Opportunity The Controls Specialist Supervisor serves as a senior technical leader and people manager within the Controls organization, responsible for overseeing the execution of complex Building Automation System (BAS) projects while leading and developing a team of Controls Specialists and Technicians. This role combines advanced technical expertise with supervisory responsibility to ensure high-quality project delivery, standardization of best practices, and continuous development of team capability. The Controls Specialist Supervisor acts as a key escalation point for technical issues and plats a critical role in aligning field execution with operational and business objectives. Responsibilities Technical Leadership & Project Oversight: • Oversee and support the execution of large-scale, multi-system BAS projects from initiation through commissioning and closeout., • Architect and review control strategies, sequences of operation, and system designs for complex applications., • Provide advanced diagnostics, troubleshooting, and system optimization support across projects., • Serve as the primary escalation point for complex technical challenges. Team Leadership & Development • Supervise, coach, and develop a team of Controls Specialists and Technicians., • Conduct performance management activities, including goal setting, feedback, and development planning., • Support hiring, onboarding, and training of new team members., • Foster a culture of accountability, collaboration, and continuous improvement. Commissioning & Quality Assurance • Ensure commissioning activities are executed effectively and systems meet design specifications and customer expectations., • Drive quality standards across all projects, ensuring consistency in programming, installation, and system performance., • Identify opportunities for system improvements, energy efficiency, and operational optimization. Standardization & Continuous Improvement • Establish and enforce best practices, technical standards, and programming consistency across the Controls team., • Lead initiatives to improve processes, tools, and methodologies to enhance operational efficiency and scalability. Preconstruction & Cross-Functional Collaboration • Partner with Sales and Engineering teams to support estimating, design reviews, and project planning., • Provide technical guidance on system architecture, integration strategies, and project feasibility., • Collaborate with Operations to align field execution with project schedules and financial objectives. The Required Profile • Advanced expertise in DDC programming, controls architecture, and BAS design., • Strong experience with multi-protocol integration, including BASnet, Modbus, and LonWorks., • Advanced knowledge of IP networking and troubleshooting within BAS environments., • Experience with energy analytics, system optimization, and performance tuning., • Deep understanding of HVAC mechanical systems and their interaction with control systems., • 6 – 10+ years of experience in Building Automation Systems (BAS/BMS)., • Prior experience in a lead, supervisory, or project leadership role preferred., • Demonstrated ability to lead complex BAS projects and mentor technical teams., • Recognized as a technical subject matter expert in controls systems., • Relevant certifications or experience with BAS platforms such as Niagara, Distech, or similar preferred. Work Environment This position operates in a combination of office and field environments, with regular visits to construction sites, customer facilities, and mechanical rooms. The role requires collaboration with cross-functional teams, including Sales, Engineering, and Field Operations. Work environments may include exposure to varying temperatures, noise levels, and industrial conditions. Adherence to safety protocols and use of personal protective equipment (PPE) is required during site visits. Occasional travel may be required to support project execution and team oversight. Physical Demands The physical demands described here are representative of those required to successfully perform the essential functions of this job: • Regularly required to stand, walk, and navigate active job sites for extended periods., • Frequent use of hands and fingers to operate tools, equipment, and computer systems., • Ability to climb ladders, access rooftops, and work within mechanical rooms or confined spaces., • Must be able to lift and carry materials or equipment up to 25 – 50 pounds as needed., • Ability to bend, stoop, kneel, and reach to inspect, troubleshoot, or support installation of control systems., • Visual acuity required to read technical documents, wiring diagrams, and digital displays., • May require extended periods of driving to and from job sites and customer locations. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 4,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Sr. BAS/HVAC Controls Technician Kelso Building Services (KBS) – TX Join One of the Fastest Growing Smart Building Teams in the Country Kelso Building Services (KBS) is seeking experienced Senior Building Automation Systems (BAS) Service Technicians to support and grow our Building Automation Systems (BAS) service business throughout the country. This position is ideal for a highly skilled BAS professional who enjoys troubleshooting complex building systems, working directly with customers, mentoring junior technicians, and helping facilities operate at peak performance. As a Senior BAS Technician, you will serve as a trusted technical resource for commercial, healthcare, education, industrial, retail, and mission-critical facility customers while leveraging KBS's advanced remote monitoring and analytics capabilities through the Kelso Digital Operations Center (DOC). Position Summary The Senior BAS Technician is responsible for the service, maintenance, troubleshooting, repair, optimization, and customer support of Building Automation Systems and integrated smart building technologies. The role combines field service expertise with remote diagnostics, analytics, cybersecurity awareness, and customer relationship management. This position requires a self-motivated professional capable of independently resolving complex BAS and HVAC control issues while maintaining exceptional customer satisfaction. Primary Responsibilities • Troubleshoot and repair BAS control systems and field devices., • Diagnose HVAC, mechanical, electrical, and controls-related issues., • Perform preventative maintenance and service agreement inspections., • Support controller replacements, upgrades, migrations, and system expansions., • Validate sequences of operation and optimize system performance., • Assist with commissioning, retro-commissioning, and startup activities., • Complete point-to-point verification and functional performance testing., • Maintain accurate documentation and system backups, • Support enterprise and site-level building automation platforms., • Assist customers with energy optimization initiatives., • Configure alarming, trending, dashboards, and analytics., • Support integration of HVAC, lighting, power monitoring, refrigeration, and specialty systems., • Assist with Fault Detection & Diagnostics (FDD) initiatives., • Utilize remote monitoring tools to identify and resolve issues proactively., • Develop strong customer relationships., • Serve as the primary technical contact for assigned accounts., • Provide recommendations for system improvements and lifecycle planning., • Identify and develop service agreement and project opportunities., • Coordinate with project managers, service managers, and sales teams., • Mentor junior technicians and apprentices., • Assist with technical training and onboarding., • Provide field leadership on complex service projects., • Support technical standards and best practices. Preferred Technical Experience Experience with one or more of the following platforms: • Tridium Niagara, • Johnson Controls Metasys, • Distech Controls, • Delta Controls, • Siemens Desigo, • Honeywell WEBs, • Alerton, • Reliable Controls, • KMC Controls, • Carrier i-Vu, • ABB, • Schneider Electric EcoStruxure Additional Experience Desired • BACnet/IP, • BACnet MS/TP, • Modbus RTU/TCP, • LonWorks, • MQTT, • API Integrations, • Networking fundamentals, • VPN technologies, • Remote access solutions, • OT cybersecurity best practices Qualifications Required • 3+ years of BAS service experience., • Strong HVAC troubleshooting knowledge., • Experience reading control drawings and sequences of operation., • Experience commissioning and servicing DDC systems., • Valid driver's license with acceptable driving record., • Ability to pass background screening and drug testing., • Strong communication and customer service skills. Preferred • Niagara N4 Certification., • Manufacturer certifications., • HVAC Technician certification., • Electrical troubleshooting experience., • Associate degree or technical training in HVAC, Controls, Electronics, or related field. Compensation & Benefits Compensation • $35.00 – $45.00+ per hour based on experience and certifications., • Overtime opportunities., • Performance incentives., • company vehicle Benefits • Medical, Dental, and Vision Insurance., • 401(k) with company match., • Paid Time Off., • Paid Holidays., • Company-provided training and certifications., • Career advancement opportunities., • Access to industry-leading smart building technologies. Why Join KBS? At Kelso Building Services, we are building the future of intelligent facilities through our nationwide Smart Buildings and Digital Operations initiatives. Our technicians are supported by the KBS Digital Operations Center, advanced analytics tools, remote engineering resources, and a growing team of BAS experts across the country. If you are looking for a career where you can combine HVAC expertise, controls technology, data analytics, and customer engagement while working on some of the most advanced facilities in the Southwest, we want to hear from you. Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description Sr. BAS/HVAC Controls Technician Kelso Building Services (KBS) – TX Join One of the Fastest Growing Smart Building Teams in the Country Kelso Building Services (KBS) is seeking experienced Senior Building Automation Systems (BAS) Service Technicians to support and grow our Building Automation Systems (BAS) service business throughout the country. This position is ideal for a highly skilled BAS professional who enjoys troubleshooting complex building systems, working directly with customers, mentoring junior technicians, and helping facilities operate at peak performance. As a Senior BAS Technician, you will serve as a trusted technical resource for commercial, healthcare, education, industrial, retail, and mission-critical facility customers while leveraging KBS's advanced remote monitoring and analytics capabilities through the Kelso Digital Operations Center (DOC). Position Summary The Senior BAS Technician is responsible for the service, maintenance, troubleshooting, repair, optimization, and customer support of Building Automation Systems and integrated smart building technologies. The role combines field service expertise with remote diagnostics, analytics, cybersecurity awareness, and customer relationship management. This position requires a self-motivated professional capable of independently resolving complex BAS and HVAC control issues while maintaining exceptional customer satisfaction. Primary Responsibilities • Troubleshoot and repair BAS control systems and field devices., • Diagnose HVAC, mechanical, electrical, and controls-related issues., • Perform preventative maintenance and service agreement inspections., • Support controller replacements, upgrades, migrations, and system expansions., • Validate sequences of operation and optimize system performance., • Assist with commissioning, retro-commissioning, and startup activities., • Complete point-to-point verification and functional performance testing., • Maintain accurate documentation and system backups, • Support enterprise and site-level building automation platforms., • Assist customers with energy optimization initiatives., • Configure alarming, trending, dashboards, and analytics., • Support integration of HVAC, lighting, power monitoring, refrigeration, and specialty systems., • Assist with Fault Detection & Diagnostics (FDD) initiatives., • Utilize remote monitoring tools to identify and resolve issues proactively., • Develop strong customer relationships., • Serve as the primary technical contact for assigned accounts., • Provide recommendations for system improvements and lifecycle planning., • Identify and develop service agreement and project opportunities., • Coordinate with project managers, service managers, and sales teams., • Mentor junior technicians and apprentices., • Assist with technical training and onboarding., • Provide field leadership on complex service projects., • Support technical standards and best practices. Preferred Technical Experience Experience with one or more of the following platforms: • Tridium Niagara, • Johnson Controls Metasys, • Distech Controls, • Delta Controls, • Siemens Desigo, • Honeywell WEBs, • Alerton, • Reliable Controls, • KMC Controls, • Carrier i-Vu, • ABB, • Schneider Electric EcoStruxure Additional Experience Desired • BACnet/IP, • BACnet MS/TP, • Modbus RTU/TCP, • LonWorks, • MQTT, • API Integrations, • Networking fundamentals, • VPN technologies, • Remote access solutions, • OT cybersecurity best practices Qualifications Required • 3+ years of BAS service experience., • Strong HVAC troubleshooting knowledge., • Experience reading control drawings and sequences of operation., • Experience commissioning and servicing DDC systems., • Valid driver's license with acceptable driving record., • Ability to pass background screening and drug testing., • Strong communication and customer service skills. Preferred • Niagara N4 Certification., • Manufacturer certifications., • HVAC Technician certification., • Electrical troubleshooting experience., • Associate degree or technical training in HVAC, Controls, Electronics, or related field. Compensation & Benefits Compensation • $35.00 – $45.00+ per hour based on experience and certifications., • Overtime opportunities., • Performance incentives., • company vehicle Benefits • Medical, Dental, and Vision Insurance., • 401(k) with company match., • Paid Time Off., • Paid Holidays., • Company-provided training and certifications., • Career advancement opportunities., • Access to industry-leading smart building technologies. Why Join KBS? At Kelso Building Services, we are building the future of intelligent facilities through our nationwide Smart Buildings and Digital Operations initiatives. Our technicians are supported by the KBS Digital Operations Center, advanced analytics tools, remote engineering resources, and a growing team of BAS experts across the country. If you are looking for a career where you can combine HVAC expertise, controls technology, data analytics, and customer engagement while working on some of the most advanced facilities in the Southwest, we want to hear from you.

Job Description Key Responsibilities • Manage team research and analysis of state policy matters, ensuring accuracy and alignment with organizational priorities., • Oversee executive briefings and presentations that clearly articulate costs, benefits, and implications of policy actions., • Coordinate with General Counsel, Executive Team, and external stakeholders to support policy development., • Lead program planning and continuous improvement of processes supporting policy deliberation and governance., • Review Board and PUC materials for alignment with data-driven standards; escalate concerns as needed., • Monitor PUC meetings, legislative hearings, and state policy dockets, ensuring timely updates., • Direct tracking of projects and filings, assigning workload and escalating matters requiring General Counsel attention., • Coordinate impact analysis and implementation guidance across the employer's staff., • Manage team participation in internal meetings and special assignments. Required Qualifications • 10+ years of experience, • Bachelor's degree, • Master's degree Skills • State Policy Coordination, • PUC Relations, • Legislative Analysis, • Team Leadership, • Executive Briefings, • Program Planning, • Project Tracking, • Impact Analysis, • Texas Electric Utility Market Experience, • Texas PUC Interaction Schedule Start date: 2026-10-05 Next Steps Shortlisted candidates will receive an email from eximius.ai@compunnel.com with instructions to complete a required screening step. Completion of this screening is mandatory to be considered for the role.If you do not receive this email after applying, please contact our Talent Expert at abhishek.kaushik@compunnel.com. \nCompany Description Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice. We have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis. Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice.\r\n\r\nWe have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.

Job DescriptionDescription: Position Summary MMBR Systems, an Integrated Water Services (IWS) company, is seeking a detail-oriented Assembly Technician to support assembly and production operations at our Austin, TX facility. This role is responsible for assembling and packaging components and equipment to technical specifications while ensuring quality, safety, and efficiency. The ideal candidate is hands-on, mechanically inclined, and thrives in a fast-paced manufacturing environment. Company Overview Integrated Water Services (IWS) is revolutionizing water! For over 20 years, we have been at the forefront of transforming water challenges into sustainable solutions. Our team of passionate innovators designs and builds cutting-edge water and wastewater treatment systems that protect communities and the environment. We are not just engineers and builders; we are problem solvers, creators, and environmental stewards. Join us in building a better future, one water drop at a time. Key Responsibilities • Assemble components and products using hand tools, power tools, and assembly equipment while following technical drawings and schematics, • Inspect finished products for accuracy, completeness, and compliance with specifications, • Troubleshoot mechanical issues during the assembly process to minimize delays, • Maintain a clean, organized, and safe work environment in compliance with safety standards, • Document assembly processes, production metrics, and quality-related information, • Support material handling and inventory management to ensure efficient workflow, • Collaborate with engineering, quality, and operations teams to improve assembly processes and efficiencyRequirements: Required: • High school diploma or equivalent, • 1+ year of experience in a manufacturing or light industrial environment, • Proficiency with hand tools, power tools, and assembly equipment, • Ability to read and interpret technical drawings, schematics, and assembly instructions, • Strong attention to detail and commitment to quality standards Preferred: • Technical certification or vocational training in assembly or manufacturing, • Experience with lean manufacturing or quality control processes, • Familiarity with precision components and mechanical assembly Physical & Work Environment • Manufacturing and warehouse environment with exposure to equipment and moderate noise, • Ability to lift up to 40 lbs and operate material handling equipment, • May require overtime or occasional weekend work, • Protective equipment required; adherence to safety protocols is mandatory Why Join IWS? • Opportunity to support the launch and growth of a new production facility, • Collaborative, team-oriented environment with strong support from engineering and operations, • Mission-driven work delivering critical water and wastewater solutions Join Our Team: Are you ready to make a splash? IWS is seeking talented individuals to join our high-energy team. We offer competitive compensation and endless opportunities for growth. Be part of something bigger than yourself. IWS offers: • Competitive salary and benefits including:, • Medical, Dental, Vision, STD, LTD, • PTO and 8 company-paid holidays, • 401k, • Incentive compensation IWS is an equal opportunity employer, we do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, or sexual orientation.

Job DescriptionDescription:About Us Patriot Abatements is a professional environmental abatement and mold remediation company specializing in asbestos, mold, and other regulated material remediation for residential and commercial properties. We operate in fast-paced, field-driven environments with a strong emphasis on safety, regulatory compliance, quality execution, and customer satisfaction. Position Summary The Abatement & Mold Remediation Manager is responsible for managing all abatement and mold remediation projects from initial lead intake through final invoicing and job closeout. This role is hands-on and field-driven, requiring active participation in inspections, scope development, job execution, and team supervision. The Manager is accountable for project performance, regulatory compliance, safety, quality control, financial accuracy, and customer satisfaction across all assigned projects. This position requires a valid TDLR-issued Mold Remediation Contractor (MRC) license and demonstrated experience in both mold remediation and asbestos abatement operations. Key Responsibilities • Manage abatement and mold remediation projects from lead response through final billing and closeout, • Actively respond to and follow up on incoming leads related to abatement and mold remediation services, • Inspect residential and commercial properties to assess conditions and determine appropriate remediation strategies, • Develop detailed scopes of work in compliance with regulatory and insurance requirements, • Successfully close abatement and mold remediation jobs and oversee project execution, • Perform and supervise on-site abatement, mold remediation, and demolition activities as needed, • Ensure proper containment, engineering controls, PPE usage, and safety protocols are followed at all times, • Maintain full compliance with OSHA, EPA, TDLR, and other applicable regulatory requirements, • Supervise, train, and lead abatement and remediation technicians and supervisors, • Coordinate and communicate with customers, insurance adjusters, industrial hygienists, and third-party consultants, • Ensure accurate documentation, daily logs, photos, reports, and regulatory records are completed and maintained, • Prepare and review job documentation, invoicing, and billing in accordance with insurance and regulatory standards, • Conduct jobsite inspections and quality control checks throughout the project lifecycle, • Manage equipment, materials, and inventory related to abatement and remediation operations, • Assist with cost control, job profitability, and operational reporting, • Respond to emergency, after-hours, or time-sensitive situations as required Qualifications • Valid TDLR-issued Mold Remediation Contractor (MRC) license required, • Proven experience in mold remediation and asbestos abatement operations, • 3–5 years of experience in abatement, remediation, or related construction operations, • Prior leadership or supervisory experience in field-based environments, • Strong working knowledge of containment methods, safety procedures, and regulatory compliance, • Ability to read and interpret scopes of work, protocols, safety plans, and regulatory documentation, • Comfortable performing physical labor and working in demanding jobsite conditions, • Strong communication, organizational, and customer-facing skills, • Valid driver’s license Preferred Certifications (as applicable) • Asbestos Supervisor or Contractor Certification, • Lead Supervisor Certification, • OSHA 30-Hour Construction, • Additional state or federal environmental certifications Compensation & Benefits • Competitive compensation based on experience, • Medical, dental, and vision insurance, • Paid time off and paid holidays, • Career growth and advancement opportunities, • Ongoing training and professional development Equal Employment Opportunity Patriot Abatements is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status in accordance with applicable law. ADA Statement Patriot Abatements complies with the Americans with Disabilities Act (ADA) and provides reasonable accommodations to qualified individuals with disabilities. Applicants requiring accommodation during the application or hiring process should notify Human Resources. #ZR Requirements:

Job Description About Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About You and The Role Please Note: The Zipline SkillBridge program provides transitioning service members the opportunity to gain work experience through an internship during their final 180 days of service. Zipline offers both structured instruction and on-the-job training through a 3-4 month internship. This is not a general employment opportunity. This role is only open to active-duty U.S. military service members who have been approved (or are eligible for approval) to participate in the DoW SkillBridge program. Applications from candidates who are not SkillBridge-eligible cannot be considered. Zipline's delivery operations rely on ground systems that are safe, correctly installed, and available when sites need them. As a Ground Systems Service Operations Electrician, you will build and sustain the electrical and network infrastructure that supports those operations at new and operating sites. You will own field-installation quality, maintenance, and troubleshooting within published standards and procedures. Excellent work means sites are commissioned with verified installations, complete records, resolved corrective actions, and reliable systems ready for operation. What You'll Do • Install, configure, and commission ground systems, ensuring quality control and issue resolution., • Diagnose and resolve complex electrical/network faults and site issues., • Perform maintenance and upgrades to maximize uptime and reliability., • Collaborate with engineering teams to manage ticketing and documentation., • Maintain inventory, tool accountability, and site installation records., • Ensure strict compliance with safety protocols, electrical standards, and SOPs., • Develop and update technical guides and installation standards., • Maintain required certifications and a safety-first mindset.What You'll Bring Basic Qualifications: • Licensed Electrician or equivalent electrical trades background., • Strong safety culture; experience following mechanical/electrical safety procedures., • Competency in electrical/mechanical assembly and inventory management., • Ability to perform shift work and work outdoors in all weather., • Valid U.S. driver's license; ability to lift 55+ lbs., • Travel requirement: 20% (80% travel during the first 3 months for training). Preferred Qualifications: • OSHA 30 certification., • Proficiency in reading technical drawings., • Experience with material handling equipment (forklift, pallet jack, scissor lift)., • Experience in HVAC, industrial networking, or manufacturing equipment maintenance., • Proven ability to adapt to new technologies and solve time-sensitive, complex problems.What Else You Need to Know SkillBridge start dates are flexible. Housing is not provided. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! Voluntary Self-Identification For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file. As set forth in Zipline 's Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Job Description The Senior Estimator leads complex estimating and preconstruction efforts for large-scale commercial, industrial, and mission critical electrical construction projects, including hyperscale data centers, central utility plants, healthcare facilities, manufacturing operations, and other technically demanding environments. This role serves as a senior technical and strategic resource within the estimating department and is responsible for overseeing complete project pricing strategies from conceptual design through final proposal submission. The Senior Estimator directs detailed estimate development including labor forecasting, equipment analysis, subcontractor scope evaluation, constructability review, value engineering, risk assessment, and schedule analysis to ensure accurate and competitive project pricing. This position collaborates extensively with executive leadership, operations teams, engineering, BIM/VDC, procurement, and business development throughout the pursuit lifecycle. This role is expected to lead high-profile and negotiated pursuits, support client presentations and preconstruction meetings, mentor junior estimating staff, and provide guidance on estimating standards, labor units, and market pricing strategies. The Senior Estimator plays a critical role in securing profitable work, reducing operational risk exposure, and supporting long-term organizational growth within highly competitive construction markets. Essential Functions, Duties, and Responsibilities Tasks may include, but are not limited to the following: · Lead and independently prepare detailed cost estimates for large-scale commercial, industrial, healthcare, manufacturing, and mission critical electrical construction projects · Analyze complex bid documents, specifications, drawings, schedules, and phasing requirements to define complete project scope and identify cost and operational risks · Develop comprehensive labor, material, equipment, subcontractor, general conditions, and indirect cost estimates for competitive and negotiated project pursuits · Lead quantity takeoffs, labor productivity analysis, constructability reviews, and installation planning for complex electrical systems · Coordinate and lead subcontractor and vendor solicitation efforts, including scope reviews, bid leveling, clarifications, and pricing evaluations · Participate in bid strategy development, Go/No-Go evaluations, executive estimate reviews, and final proposal presentations · Collaborate closely with operations, project management, BIM/VDC, procurement, and field leadership to align estimating assumptions with execution strategies and project logistics · Prepare conceptual budgets, schematic estimates, GMP proposals, and design-build preconstruction deliverables · Identify value engineering opportunities, procurement strategies, and cost-saving alternatives while maintaining project quality, schedule, and operational requirements · Evaluate labor productivity, material escalation, market conditions, schedule impacts, and construction sequencing to improve estimate accuracy and profitability · Assist the Chief Estimator and Preconstruction leadership in managing estimating priorities, bid schedules, workload distribution, and departmental processes ·Lead post-bid reviews, estimate turnover meetings, and lessons-learned evaluations to support continuous improvement initiatives ·Develop, maintain, and refine estimating databases, labor units, assemblies, historical cost records, and market pricing benchmarks ·Build and maintain strong working relationships with clients, suppliers, subcontractors, manufacturers, and industry partners ·Represent the company during pre-bid meetings, site walks, design coordination meetings, and client interviews ·Mentor, train, and provide technical guidance to Estimator I and Estimator II team members ·Support business development and strategic growth initiatives by assisting with client relationship development and major project pursuits ·Maintain compliance with company estimating standards, bid procedures, contractual requirements, and risk management practices · Build and maintain strong working relationships with clients, suppliers, subcontractors, manufacturers, and industry partners · Represent the company during pre-bid meetings, site walks, design coordination meetings, and client interviews · Mentor, train, and provide technical guidance to Estimator I and Estimator II team members · Support business development and strategic growth initiatives by assisting with client relationship development and major project pursuits · Maintain compliance with company estimating standards, bid procedures, contractual requirements, and risk management practices Supervisory Responsibilities ·Provides technical leadership, mentorship, and day-to-day guidance to Estimator I and Estimator II team members ·Supports onboarding and development of estimating staff through training, estimate reviews, and knowledge sharing · Assists estimating leadership with workload coordination, bid assignments, and departmental priorities ·May lead estimating teams on large or complex project pursuits and coordinate collaborative estimating efforts across multiple disciplines ·Serves as a senior technical resource within the estimating and preconstruction department Qualifications: Education, Experience, and Skills Required: ·Minimum of 6–10 years of progressive electrical estimating experience within commercial, industrial, healthcare, manufacturing, or mission critical construction environments ·Proven experience leading complex electrical estimates and major bid pursuits with significant contract values and operational complexity ·Strong background in design-build, negotiated, conceptual, and hard bid project delivery methods ·Experience preparing labor forecasts, conceptual budgets, GMP proposals, value engineering analyses, and constructability reviews ·Demonstrated ability to manage multiple large-scale pursuits simultaneously while meeting aggressive deadlines ·Experience collaborating with operations, field leadership, procurement, BIM/VDC, engineering, and executive leadership teams throughout the preconstruction process · Prior experience mentoring junior estimators and supporting estimating department development preferred ·Mission critical/data center estimating experience strongly preferred including exposure to UPS systems, generators, switchgear, commissioning, and fast-track construction schedules Preferred: · Journeyman’s License with hands on field experience, especially layout experience. · Bachelor’s Degree in construction science, electrical engineering, or related fields. · Experience using Accubid software. · Familiarity with local labor rates, material pricing, and commercial market conditions. · Valid driver’s license required · OSHA 30 certification preferred · Professional estimating certifications such as Certified Professional Estimator (CPE) or equivalent preferred · Training or certifications related to mission critical/data center construction, BIM/VDC, or advanced preconstruction practices preferred · Proficiency in estimating and construction management software platforms strongly preferred Associated Knowledge, Skills, and Abilities · Ability to manage multiple priorities while maintaining accuracy and quality. · Strong analytical and problem-solving skills. · Ability to collaborate effectively with leadership, project managers, clients, and subcontractors. · Capacity to mentor, train, and develop estimating staff. · Ability to adapt to changing project requirements and market conditions. · Commitment to professionalism, confidentiality, and ethical standards. Working Environment & Conditions/Physical Requirements · Primarily office-based with periodic travel to job sites for job walks and project reviews. · Must be able to review construction drawings and specifications for extended periods. · Occasional extended hours may be required to meet bid deadlines. Equipment or Machines Routinely Used in This Position · Computer, Accubid estimating software, Live Count digital take off software, Microsoft Office Suite, digital communication tools, and standard office equipment. Benefits · Close-knit, team-oriented work environment · Medical, Dental, and Vision Insurance · 401(k) · Bonus opportunities · PTO · Paid Holidays · Continuing education opportunities Benefits Enterprise Electrical’s Core Values & Purpose Enterprise Electrical core values: • Safety First, Safety Always (Safety), • Committed to Excellence (Greatness), • Plan it, Do it, Own it (Accountability), • Learn it, Know it, Teach it (Mentorship), • One Team, One Goal (Teamwork), • Positive Attitude Required (Positivity) Our Core Purpose: Building Relationships to Enrich Lives

Job DescriptionSr Electrical Project Manager Relocation Assistance Abilene, TX-Relocation Assistance Full-Time | Direct Hire Opportunity with Superior Skilled Trades Compensation: Base Salary: $150,000–$175,000/year Auto Allowance: $14,400 annually Year-End Bonus: 10–15% based on company performancePosition Overview Superior Skilled Trades is seeking an experienced Sr Electrical Project Manager for a direct hire opportunity in Abilene, TX. This position will oversee the successful delivery of large, technically complex electrical construction projects, with a strong focus on data centers and mission-critical environments. The Project Manager will be responsible for projects from preconstruction and planning through installation, commissioning, turnover, and closeout. This role requires someone who can effectively manage project financials, schedules, procurement, subcontractors, field coordination, risk, quality, and client relationships while working closely with Superintendents and project teams. Key Responsibilities • Manage large-scale electrical construction projects from preconstruction through completion., • Develop and maintain project schedules, budgets, forecasts, procurement plans, and cost controls., • Coordinate electrical construction with mechanical, structural, architectural, controls, plumbing, and other trades., • Partner closely with Superintendents and field leadership to establish work sequencing, manpower needs, and project priorities., • Manage electrical subcontractors, vendors, suppliers, and specialty contractors., • Oversee procurement and delivery of major electrical equipment, materials, and systems., • Monitor project performance and proactively address schedule, cost, quality, or construction concerns., • Manage RFIs, submittals, contracts, change orders, pay applications, and project documentation., • Track project costs, commitments, forecasts, and overall financial performance., • Lead coordination between clients, engineers, subcontractors, vendors, commissioning teams, and internal project teams., • Support electrical testing, startup, commissioning, turnover, and project closeout., • Ensure electrical installations comply with project specifications, applicable codes, quality standards, and safety requirements., • Maintain an active presence in the field and participate in planning, coordination, and safety meetings., • Mentor and provide leadership to Project Engineers, Assistant Project Managers, and other project team members.Experience We're Looking For Ideal candidates will have a strong background managing large and complex electrical construction projects, particularly within: • Data Centers, • Mission-Critical Facilities, • Advanced Technology, • Semiconductor Facilities, • Large Healthcare, • Large Lifesciens or Advanced Technology Projects, • Industrial or other technically complex environments Candidates should have a solid understanding of electrical construction methods, sequencing, major electrical systems, procurement, scheduling, cost management, and commissioning. Qualifications • 7+ years of electrical construction, project engineering, or electrical project management experience., • Previous experience managing large-scale electrical construction projects., • 1–2+ years of leadership or team management experience preferred., • Bachelor's degree in Construction Management, Electrical Engineering, Engineering, or a related field preferred; equivalent industry experience will be considered., • Strong knowledge of project scheduling, budgeting, forecasting, contracts, procurement, and change management., • Ability to effectively manage multiple subcontractors, vendors, trades, and project stakeholders., • Strong leadership, communication, organization, and problem-solving skills., • OSHA 30 preferred; certification must be completed within 6 months of hire.Benefits, • Full Medical, Dental & Vision, • Short- and Long-Term Disability, • 401(k) with 6% company match, • 4 weeks of PTO, • Additional 3 weeks of PTO every 5 years during the employee's anniversary year, • $14,400 annual auto allowance, • 10–15% year-end bonus based on company performance This is an excellent opportunity for an experienced Electrical Project Manager looking to take on high-profile, technically challenging mission-critical projects with strong compensation, benefits, and long-term growth potential. INDH Powered by JazzHR bm25KMzwti

Job Description Equipment Mechanic — Transmission Austin, TX | Full-Time | Onsite/Field-Based | Travel Required The Opportunity Infravision is looking for a hands-on Equipment Mechanic — Transmission to support the inspection, maintenance, troubleshooting, and repair of specialized equipment used in our drone-enabled transmission line stringing operations. This role is critical to keeping field operations running safely, efficiently, and reliably. The Equipment Mechanic will work on electrical, hydraulic, mechanical, diesel, and control systems across specialized utility stringing equipment, including tensioners, pullers, generators, hydraulic systems, and related field assets. This is a hands-on maintenance and occasional field support role in a fast-moving operations environment. The right candidate will bring strong technical troubleshooting skills, safety discipline, field readiness, and the ability to support both shop-based and remote project-site maintenance needs. About Infravision Infravision is a high-growth, technology-enabled services company specializing in aerial robotics and software solutions for the transmission industry, with a focus on increasing grid capacity and automating power line construction. Infravision’s mission is to deliver solutions that modernize and decarbonize the power grid and accelerate the world’s transition to renewable energy. Trusted by some of the world’s largest electric utility companies, Infravision’s technologies and services are at the cutting edge of transmission and power grid modernization. Infravision operates across Australia, the United States, and India, and continues to scale globally. Find out more about Infravision and our work at: https://infravision.com.au/ Why Work For Infravision At Infravision, you will be part of a mission-driven technology company helping transform how high-voltage transmission infrastructure is built. Our work is hands-on, field-based, and directly connected to grid modernization, renewable energy growth, and critical infrastructure delivery. You will work alongside operations, field, safety, aviation, and engineering teams to keep specialized equipment operating safely and reliably in real-world project environments. We offer a collaborative, energizing work environment, competitive compensation and benefits, and the opportunity to participate in the Company’s employee share option plan. What You’ll Do • Maintain, inspect, troubleshoot, and repair specialized utility stringing equipment, including tensioners, pullers, generators, hydraulic systems, and related field assets., • Diagnose and repair electrical, hydraulic, mechanical, diesel, and control system issues using diagnostic tools, OEM schematics, and technical documentation., • Perform preventative maintenance on diesel engines, transmissions, braking systems, hydraulic systems, controls, and 480v circuits., • Perform preventative maintenance and inspections (pre and post) on stringing equipment., • Uphold safety and quality standards by conducting inspections, following OSHA and company procedures, and supporting safe work execution., • Maintain accurate maintenance records, service documentation, parts usage, and equipment history through digital systems., • Manage or support parts inventory to ensure equipment readiness and minimize downtime., • Communicate clearly with field supervisors, operators, safety teams, vendors, and internal stakeholders regarding equipment status, repair needs, and operational risks., • Work in both maintenance shop and outdoor field environments, including active construction sites, remote locations, rugged terrain, and challenging weather conditions., • Support other maintenance, field, operational, safety, documentation, and startup needs as assigned. What We’re Looking For • High school diploma or GED required., • Vocational/technical certification or associate degree in Diesel Mechanics, Electrical/Mechanical Technology, Heavy Equipment Repair, or a related field preferred., • Minimum 5 years of hands-on experience maintaining and repairing heavy industrial, construction, utility, mining, agricultural, or similar heavy equipment., • Experience with conductor stringing equipment, such as TESMEC, Condux, PullzAll, or similar cable-handling machinery, strongly preferred., • Strong ability to troubleshoot and repair up to 480V three-phase electrical systems, controls and low-voltage DC control circuits., • Strong knowledge of open and closed-loop hydraulic systems, including component removal, resealing, calibration, and troubleshooting., • Solid understanding of diesel engines, powertrains, braking systems, generators, and heavy-duty mechanical systems., • Strong diagnostic and fault-finding skills, especially under field conditions and time-sensitive operational needs., • Ability to clearly document repairs and communicate technical issues to technical and non-technical stakeholders., • Valid driver’s license required; CDL or ability to obtain a CDL within 90 days preferred., • Ability to work in a maintenance shop and outdoors in non-climate-controlled environments, including active construction sites and remote project locations., • Ability to stand, bend, climb, lift, carry, push, pull, and safely move objects up to 75 lbs., • Ability and willingness to travel, work extended hours, and support on-call needs as required., • Strong safety mindset and willingness to follow structured maintenance, safety, quality, and documentation procedures., • Flexibility to support a broad range of responsibilities in a growing startup environment. Diversity and Inclusion At Infravision, diversity and inclusion are integral to our culture. We welcome applicants from all backgrounds and are committed to fostering an inclusive environment where unique perspectives are valued. We believe different experiences, skills, and ways of thinking strengthen our teams and help us solve complex problems. Infravision is also proud to be a veteran-supportive employer, with many team members bringing former armed forces experience to our work. We encourage applications from candidates who meet the core requirements of the role and are excited to contribute to a growing, mission-driven technology company. Infravision is a proud veteran employer, with up to 40% of our workforce being from former armed forces backgrounds.

Job Description BEPC Inc. has an open position for a Gas & Chemical Technician, in the Austin, TX area! Benefits: Medical, Dental, Vision, and Life Insurance! Job Title: Gas & Chemical Technician Location: Austin, TX (78754) | On-Site Employment Type: 12-Month Contract | W2 (with possibility of extension!) Pay Rate: $19.50 - $21.68/hr Shift: C-Shift (Back half days) NO CORP-TO-CORP CANDIDATES WILL BE CONSIDERED Role Overview: BEPC is seeking a Gas & Chemical Technician to support operations within a semiconductor manufacturing environment. This is a hands-on technical opportunity for candidates interested in developing valuable skills in chemical and gas distribution systems while working in a highly controlled manufacturing setting. On-the-job training will be provided to help technicians quickly develop the technical and safety skills required for the position. This role supports the systems responsible for maintaining a reliable supply of specialty chemicals and gases used in semiconductor manufacturing. Key Responsibilities: • Safely operate assigned chemical and gas distribution systems., • Handle and perform change-outs of gas, chemical, and slurry containers., • Troubleshoot chemical and gas distribution equipment., • Perform preventive maintenance and assist with equipment repairs., • Use computer systems to support daily operations, documentation, and customer requirements., • Follow established quality, safety, and operating procedures., • Monitor equipment and systems to help maintain safe and reliable operations., • Complete required hazardous communication and site-specific safety training. Required Qualifications: • Valid driver's license., • Strong mechanical and technical aptitude., • Ability to safely perform hands-on work in an industrial or semiconductor manufacturing environment., • Ability to follow detailed safety procedures and operating requirements., • Strong communication and teamwork skills., • Ability to use computers to support daily job functions. Preferred Qualifications: • Previous maintenance, equipment technician, mechanical, electrical, or industrial experience., • Experience with chemical or gas distribution equipment is helpful but not required., • Proficiency with Microsoft Office applications., • Military technical or mechanical training is welcomed., • Previous experience in semiconductor manufacturing, general manufacturing, oil and gas, chemical operations, industrial mechanics, production, biotechnology, automotive repair, wastewater treatment, power generation, or refinery operations is highly relevant. Physical & Safety Requirements: This is an active, hands-on position in an industrial environment. Candidates must be able to meet the physical and safety requirements associated with the work, including: • Walking approximately 5–6 miles during a workday., • Lifting up to approximately 40 pounds., • Bending at the knees and performing overhead reaching., • Occasionally climbing onto tanker trucks while using required fall-protection equipment., • Wearing required personal protective equipment (PPE), which may include safety glasses, hard hats, hearing protection, chemical-resistant aprons, gloves, and safety footwear., • Wearing respiratory protection when required for specific tasks. Certain activities may require a supplied-air respirator for approximately 10–15 minutes., • Meeting facial-hair requirements when necessary to ensure the proper fit and safe operation of required respiratory protection., • Completing required fit-for-duty evaluations, which may include pulmonary function testing, audiogram testing, and a physical examination., • Completing required hazardous communication and site safety training before beginning applicable work activities., • A voucher will be provided for required safety footwear. Work Environment: On-site semiconductor manufacturing environment Training: On-the-job technical and safety training provided About BEPC: BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Apply Now! If you have a strong mechanical or technical aptitude and are interested in building your career in semiconductor manufacturing, chemical systems, or industrial equipment operations, we encourage you to apply. Please submit an up-to-date resume that includes specific examples of your relevant hands-on experience, including maintenance, equipment troubleshooting, manufacturing, mechanical work, chemical or gas systems, industrial operations, or other experience that demonstrates how you meet the qualifications for this position. \nCompany Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. About BEPC\n\nBEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive.\n\nWith competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth.

Job Description About MISUMI Americas MISUMI Americas, a division of MISUMI Group, is a leading provider of standard, configurable, and custom manufacturing solutions. By integrating a vast catalog of components with a world-class digital manufacturing platform, MISUMI Americas empowers engineers and procurement teams to accelerate innovation across the entire product lifecycle. With operations in the San Francisco Bay Area and Chicago, the company serves as a vital partner for the most innovative companies in the Americas. About our New Venture This organization is a new, U.S.-incorporated manufacturing platform built to serve frontier-technology industries — humanoid robotics, aerospace, agricultural technology, and healthcare — where reshoring, national security priorities, and speed-to-production are reshaping how and where hardware gets built. Backed by MISUMI Group, a global leader in manufacturing solutions and precision components, this venture combines precision machining, final assembly/test/packaging (FATP), supply chain orchestration, and engineering services into a single U.S.-based platform. Our founding customers include leading humanoid robotics companies, and is being built from day one to grow with a broader roster of frontier-technology manufacturers as capacity comes online. Position Summary The Director, Production Partner Management leads the strategy, development, and management of the company's external partner network. This role is responsible for identifying, qualifying, and onboarding new partners to our new organization; negotiating and structuring joint venture (JV) and other strategic capacity partnerships, including co-investment arrangements with equipment providers, staffing partners, and customers; building education and government partnerships that support talent pipelines and manufacturing incentive programs; and ensuring partners meet the quality, capacity, and cost commitments required to support the business. The ideal candidate combines hands-on manufacturing operations expertise with strong commercial and negotiation skills and is comfortable operating at both the strategic (partnership structuring, JV governance) and tactical (plant floor, supplier performance) levels. Key Responsibilities Partner Network Development • Build and execute a strategy for expanding the company's partner network across target processes, geographies, and capacity tiers., • Source, evaluate, and qualify new partners through capability audits, quality system reviews, and on-site assessments., • Lead onboarding of new partners, including capability mapping, pricing frameworks, quality agreements, and production ramp plans. Joint Venture & Strategic Partnership Structuring • Identify and evaluate joint venture, co-investment, and dedicated-capacity opportunities that expand manufacturing capabilities or secure strategic capacity., • Lead due diligence, business case development, and deal structuring for JV and strategic partnerships to our organization, in partnership with Finance, Legal, and executive leadership., • Negotiate partnership agreements, including terms, governance structures, IP and exclusivity provisions, and commercial terms; represent the company on JV governance or steering committees., • Manage the ongoing partner and JV relationship post-signing, including performance reviews, capital planning, and expansion decisions. Equipment, Staffing & Customer Co-Investment Partnerships • Build and negotiate partnerships with capital equipment manufacturers and suppliers to secure financing, leasing, or co-investment arrangements that expand partner facility capacity., • Develop strategic relationships with staffing and workforce partners to scale labor at partner facilities in line with production ramp and capacity plans., • Structure and negotiate joint investment agreements with key customers to co-fund dedicated capacity, equipment purchases, or facility expansions in exchange for committed volume or preferred terms., • Evaluate the financial and operational terms of equipment, staffing, and customer co-investment deals, partnering with Finance and Legal on deal structure and risk allocation. Education & Government Partnerships • Develop and negotiate partnership agreements with technical colleges, universities, and vocational/trade programs to build manufacturing talent pipelines, apprenticeships, and co-op programs., • Build relationships with federal, state, and local government agencies to identify and secure manufacturing incentive programs, grants, tax credits, and reshoring/onshoring initiatives., • Represent the company with workforce development boards, economic development organizations, and industry associations to advance manufacturing partnership and talent strategy., • Track policy and funding developments relevant to domestic manufacturing capacity and advise leadership on opportunities to pursue. Partner Performance & Operations Management • Establish and track partner scorecards covering quality, on-time delivery, cost, capacity utilization, and responsiveness., • Drive continuous improvement initiatives with partners, including lean manufacturing, yield improvement, and cost-down programs., • Manage capacity planning and allocation across the partner network to meet forecasted demand., • Resolve escalated quality, delivery, or commercial issues with partners; lead root-cause and corrective action processes. Cross-Functional Leadership • Partner closely with Business Development, Engineering, Quality, Finance, Legal, and Commercial teams to align partner strategy with product roadmaps and business goals., • Provide regular reporting to executive leadership on partner network health, JV performance, education/government partnership progress, and capacity risk., • Build, mentor, and lead a team of partner managers / supplier development engineers., • Own risk management for the partner portfolio, including geographic concentration, financial health of partners, and supply continuity planning.Qualifications Required • Bachelor's degree in Engineering, Operations, Business, or a related field; MBA or advanced technical degree a plus., • 8–12+ years of experience in manufacturing operations, supplier/partner development, strategic sourcing, or supply chain management, with meaningful exposure to contract manufacturing or outsourced production., • Demonstrated experience structuring, negotiating, or managing joint ventures, strategic alliances, or major capacity partnerships in a manufacturing context., • Deep understanding of manufacturing processes (e.g., CNC machining, injection molding, sheet metal, casting, additive manufacturing, or similar) and quality systems (ISO 9001, IATF 16949, AS9100, or equivalent)., • Strong commercial acumen — experience with contract negotiation, pricing models, and partnership economics., • Track record of leading cross-functional teams and managing complex, multi-stakeholder relationships., • Willingness and ability to travel 30–50%, including internationally, to partner and prospective partner facilities. Preferred • Prior experience in a director-level or equivalent role leading a partner management, strategic sourcing, or manufacturing operations function., • Experience in digital manufacturing, industrial equipment, automotive, aerospace, medical device, or a comparably regulated manufacturing sector., • Familiarity with capital planning and investment evaluation for joint venture or co-investment structures., • Experience working with globally distributed manufacturing networks, including partners in Asia, the Americas, and/or Europe., • Experience negotiating agreements with educational institutions (e.g., technical colleges, universities) and/or government agencies (e.g., economic development, workforce boards) in support of manufacturing or workforce initiatives., • Experience negotiating co-investment or joint funding arrangements with equipment suppliers, staffing partners, or customers.Success Metrics, • Growth and diversification of qualified partner capacity against strategic priorities., • Successful execution of joint venture / strategic partnership deals from evaluation through signed agreement and operational ramp., • Partner network performance against quality, delivery, and cost scorecards., • Reduction of single-source and geographic concentration risk across the partner portfolio., • Number and value of education and government partnerships established, including talent pipeline agreements and secured incentive/grant funding., • Value of co-investment secured through equipment, staffing, and customer partnership agreements. Salary Range: $130,000 base salary per year, plus a variable compensation potential of $130,000 We're actively seeking teammates who: • Bring diverse perspectives and experience to our culture and company., • Excel at being part of a strong, empathetic team., • Thrive in an environment emphasizing respect, honesty, collaboration, and growth., • Have an 'always learning' mindset that celebrates learning, not just wins., • Help us continue to build a world-class organization that values the contributions of all of our teammates We encourage applications from members of underrepresented groups, including but not limited to women, members of the LGBTQ community, people of color, people with disabilities, and veterans.

We are Hiring for a Document Control Specialist* Must-Haves: Bachelor’s degree in Engineering or related field, or equivalent practical experience 7–10 years of experience in document control within industrial or project-based environments Experience supporting EPC, refinery, manufacturing

The Project Coordinator writes proposals, monitoring plans, and then works with Instrument Technicians to install, commission, and maintain the systems through the project life cycle. Civil, Geotechnical, Structural, Mechanical, Electrical, or Industrial Engineering Land Surveying, commercial constr

Job DescriptionOrbital Welder First, Second or Third Shift positions available! Job Description For over 20 years, Apparent Technologies has been a leading engineering and manufacturing company supporting the semiconductor industry. We are currently seeking Full-Time Orbital Welders to join our team at our Austin, TX facility. Competitive hourly pay is based on experience and qualifications, along with the comprehensive benefits listed below. Candidates with experience in orbital welding, high-purity (UHP) gas systems, cleanroom manufacturing, semiconductor manufacturing, aerospace, or precision fabrication will be given priority during the interview process. We offer ongoing training, career advancement opportunities, and the chance to work with cutting-edge welding technology in a fast-growing manufacturing environment. Benefits of the Orbital Welder Position • Paid Time Off, • Career Growth Opportunities, • Health Insurance, • Health Savings Account (HSA), • Vision Insurance, • Dental Insurance, • Life Insurance, • 401(k), • Various benefits through the ADP Marketplace, including discounts on shopping, travel, and even pet insuranceResponsibilities (Included, but not limited to), • Orbital Welding: Perform precision orbital welding of stainless steel, Hastelloy, tubing, valves, fittings, manifolds, and ultra-high-purity (UHP) gas delivery components used in semiconductor manufacturing., • Cleanroom Manufacturing: Manufacture UHP gas line assemblies and weldments while following strict Class 100 cleanroom procedures, contamination control standards, and customer cleanliness requirements., • Equipment Setup: Set up, calibrate, program, and operate orbital welding equipment using approved weld schedules, parameters, and procedures to produce consistent, high-quality welds., • Purge System Operation: Configure purge systems, gas mixing equipment, and weld preparation processes to achieve high-purity, vacuum-tight welds that meet semiconductor industry standards., • Fabrication & Assembly: Perform tube cutting, fit-up, alignment, tacking, scribing, and assembly operations while maintaining precise dimensional tolerances and exceptional workmanship., • Blueprint Interpretation: Read and interpret blueprints, engineering drawings, weld procedures, travelers, and work instructions to ensure accurate fabrication and assembly., • Quality Assurance: Inspect completed welds for quality, appearance, dimensional accuracy, and compliance with customer specifications. Produce weld coupons and support qualification testing as required., • Documentation: Complete production records, weld logs, inspection documentation, and traceability records accurately and in accordance with quality procedures., • Equipment Maintenance: Perform routine maintenance, cleaning, and basic troubleshooting of orbital welding equipment and cleanroom tools to ensure reliable operation., • Team Collaboration: Work closely with engineering, production, quality, and manufacturing teams to meet production schedules while maintaining the highest quality standards., • Safety & Compliance: Follow all company safety policies, cleanroom protocols, PPE requirements, and ISO 9001 quality procedures.Qualifications, • Experience: Previous orbital welding experience is required. Three (3) or more years of welding or precision fabrication experience is preferred., • Education: High school diploma or equivalent required. Technical training in welding, fabrication, manufacturing technology, or a related field is preferred., • Technical Knowledge:, • Orbital welding equipment and programming, • Stainless steel and Hastelloy welding, • Ultra-High-Purity (UHP) gas delivery systems, • Semiconductor manufacturing processes, • Cleanroom manufacturing practices, • Blueprint and engineering drawing interpretation, • Weld purge systems and gas management, • Precision fabrication and assembly, • Basic inspection and measuring equipment, • Skills:, • Exceptional attention to detail, • Strong mechanical aptitude, • Excellent hand-eye coordination, • Strong troubleshooting and problem-solving skills, • Ability to work independently and collaboratively, • Effective verbal and written communication, • Preferred Qualifications:, • Experience in semiconductor, pharmaceutical, aerospace, or other high-purity manufacturing environments, • Welding certifications or technical certifications, • Experience with UHP gas line fabrication and orbital weld qualification proceduresPhysical Requirements, • Ability to stand for extended periods throughout the workday, • Frequent bending, kneeling, reaching, lifting, and repetitive hand movements, • Ability to lift up to 50 pounds, • Ability to work safely in a cleanroom environment while wearing required PPE and cleanroom garments, • Comfortable working around welding equipment, fabrication machinery, and moderate industrial noise levelsSchedule We currently have openings available on: • First Shift, • Second Shift Overtime may be required based on production demands. About Us Founded in 2004, Apparent Technologies, Inc. provides precision machining, engineering, design, orbital welding, and high-purity manufacturing services for the semiconductor industry. We specialize in Hastelloy HC22, stainless steel fabrication, and complex UHP gas delivery systems. As an ISO 9001-certified manufacturer with a Class 100 Cleanroom, we utilize patented, state-of-the-art welding and monitoring technologies that distinguish us from other manufacturers. Our experienced team proudly serves local, regional, and international customers from our Austin, Texas facility while maintaining an unwavering commitment to quality, innovation, and continuous improvement.

Job Description [Position] Logistics Operation (Piping Components, Austin TX) [About Our Client] Company focus on business in trading steel, chemical and various items from semiconductor industry and also investment projects in the Renewable Energy industry. The business under the Electronic Industry Division focuses on providing solutions for semiconductor manufacturing corporations such as Samsung Electronics, Intel, Micron and other end-users, in relation to raw material, electronic parts, process chemical and manufacturing equipment. [Job Summary] Company has an operation office in Austin and supplies various piping components, such as pipe, fitting, and valve, for Semiconductor Fabs and other industrial areas in the US. We provide total solutions to our customers, from procurement and stock management. The main key of our business is to supply materials from the US and overseas to customers in the US, handle all operation processes, and deliver them to the Contractors’ job site in a timely manner, and develop new customers for further business enlargement and new vendors for supply chain capability improvement. We are recruiting a self-motivated and enthusiastic employee. The ideal candidate has experience in sales or procurement of semiconductor/other industrial piping components, from tool hook-up to primary large-sized goods, and knowledge of logistics, Supply Chain Management, and Semiconductor FABs networks in the US. [Job Description] • Operations works involved in the Sales of piping components to customers in the semiconductor and other industry; Quotation, Order, Lead time management, Invoicing, and so on, • Manages any issues arising from sales such as quality, delivery and payments in cooperation with the Group Manager, Headquarter (in Korea), Vendors and Customers, • Negotiate sales conditions with business partners and deliver into documents, • Build up trusting relationships with business partners to secure/foster current business, • Ability to travel to out of States/Overseas/Local Business trips Requirements [Qualifications] • Must be self-motivated, have a positive attitude, and demonstrate professionalism, while helping to create, develop, and implement process improvements., • Experience in sales or procurement, particularly in the semiconductor industry or related fields involving pipingcomponents is a significant advantage., • Experience in semiconductor fabs, mechanical engineering, mechanical materials, or supply chain management is a significant advantage., • A strong team player who is focused on driving business growth through strategic initiatives is highly desirable., • Excellent written and verbal communication skills are required., • Language requirements: English is a must; Korean is preferred., • Proficiency in SAP and Microsoft Office programs, particularly Excel and PowerPoint, is expected Benefits • Salary DOE,, • Medical, Dental, Vision, Life with different package, • 10 days PTO + 6 days Sick days, • 401k 4 % match, • Other company benefit package

Are you passionate about workplace safety, quality excellence, and continuous improvement? Our client is seeking a Quality, Health, Safety & Environmental (QHSE) Coordinator to help drive a culture of safety, compliance, and operational excellence within a growing manufacturing facility serving the data center industry. This role will play a critical part in supporting quality management systems, workplace safety initiatives, environmental compliance programs, and continuous improvement efforts across fabrication and assembly operations. Working closely with Operations, Engineering, Supply Chain, and Project Management teams, you'll help ensure products are manufactured safely, meet quality standards, and comply with applicable regulations and industry requirements. What You'll Do • Support and maintain Quality Management Systems (QMS), including ISO 9001 principles., • Conduct quality inspections of fabricated and assembled MEP modules., • Manage non-conformance reporting (NCR) and corrective/preventive action (CAPA) processes., • Participate in root cause analysis and continuous improvement initiatives., • Lead safety inspections, job hazard analyses, and incident investigations., • Support OSHA compliance and employee safety training programs., • Assist with environmental compliance, waste management, recycling, and hazardous materials handling., • Coordinate internal audits, customer audits, and training documentation., • Monitor and analyze QHSE performance metrics and prepare leadership reports., • Help foster a proactive culture focused on quality, safety, and operational excellence. What We're Looking For • 3-5 years of experience in Quality, Safety, Environmental, or Manufacturing Operations., • Experience in fabrication, manufacturing, modular construction, industrial equipment, or related environments., • Working knowledge of ISO 9001 Quality Management Systems., • Understanding of OSHA regulations and workplace safety best practices., • Experience conducting inspections, audits, and corrective action programs., • Strong analytical, organizational, and communication skills., • Proficiency with Microsoft Office and ERP/document management systems., • Ability to collaborate effectively across multiple departments. Preferred Qualifications • Associate's or Bachelor's degree in Industrial Technology, Manufacturing, Occupational Safety, Engineering, Environmental Science, Quality Management, or a related field., • OSHA 30 certification or equivalent safety training., • Experience with Lean Manufacturing or Continuous Improvement methodologies., • ASQ CQIA, CQT, or related quality certifications., • Knowledge of MEP systems, modular construction, or industrial manufacturing environments. Benefits: Fully covered family healthcare Why Join? This is an excellent opportunity to make a visible impact within a growing organization supporting critical infrastructure projects. You'll have the ability to influence safety culture, quality performance, and operational excellence while working alongside a collaborative and innovative team. #QHSE #SafetyJobs #QualityManagement #EHS #ManufacturingJobs #DataCenterInfrastructure #OSHASafety #ISO9001 #ContinuousImprovement #LeanManufacturing #IndustrialSafety #NowHiring

Job DescriptionCompany Description Renesas is a global semiconductor company delivering innovative embedded processing, analog, power, and connectivity solutions. This role supports advanced power management products for demanding compute, AI, datacenter, and infrastructure applications. Job Description Renesas is seeking an experienced Digital Mixed-Signal System Architect to define, model, and validate the digitally implemented mixed-signal data paths used in next-generation digital power management products for AI, datacenter, and high-performance computing applications. This role focuses on the digital architecture that connects real-world analog measurements to control-loop decisions: ADC interfaces, ADC controllers, front-end filtering, digital signal processing, telemetry paths, emulation models, timing behavior, fixed-point implementation, and hardware/firmware interface definition. The successful candidate will work closely with systems, digital design, firmware, verification, validation, applications, and analog design teams to translate product requirements into executable architecture, emulation-ready models, RTL-facing specifications, and silicon-validation evidence. This is not a traditional analog design role; it is a digital systems architecture role for mixed-signal power products. WHY THIS ROLE MATTERS • Own the digital mixed-signal architecture between sensed power-rail behavior and control-loop action., • Define reusable front-end DSP, ADC-control, emulation, and observability patterns for advanced digital power products., • Help product teams converge faster by making mixed-signal behavior executable, measurable, and traceable from model to RTL to silicon. KEY RESPONSIBILITIES • Define digital mixed-signal system architecture for digital multiphase power controllers and related power management products., • Architect front-end digital signal-processing paths used to filter, condition, scale, decimate, observe, and route sensed voltage and current information into control-loop, telemetry, protection, and diagnostic functions., • Define ADC interface behavior, ADC controller requirements, sampling relationships, data-valid timing, channel sequencing, calibration hooks, latency budgets, saturation behavior, quantization expectations, and error-handling requirements., • Develop executable models and emulation-oriented representations that allow system behavior to be explored before RTL and silicon are complete., • Translate system and control-loop requirements into RTL-facing specifications, fixed-point formats, datapath constraints, register behavior, firmware interfaces, and validation requirements., • Collaborate with analog design experts on ADC and sensing assumptions while focusing ownership on the digital architecture, control data path, emulation behavior, and system-level integration., • Work with firmware teams to define observability, debug access, telemetry behavior, configuration flows, and bring-up hooks needed for characterization and customer support., • Partner with verification and validation teams to define reference scenarios, pass/fail criteria, correlation expectations, coverage targets, and structured evidence for architectural decisions., • Analyze tradeoffs across loop performance, latency, noise sensitivity, resolution, dynamic range, power, area, configurability, implementation complexity, and customer-visible behavior., • Document architecture clearly for cross-functional execution teams, including assumptions, interface contracts, model behavior, limits, corner cases, and validation expectations.Qualifications, • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline., • 8+ years of experience in digital systems architecture, mixed-signal SoC architecture, digital signal processing, power management, control-oriented digital design, semiconductor verification, or related product development., • Strong understanding of digital signal-processing concepts, fixed-point arithmetic, sampling theory, filtering, timing, latency, quantization, saturation, and numeric precision tradeoffs., • Experience defining ADC-facing digital logic, sensor data paths, telemetry data paths, digital controllers, or control-loop support logic in a semiconductor product environment., • Ability to translate system-level requirements into RTL-facing architecture, firmware-visible behavior, emulation models, and validation-ready specifications., • Strong cross-functional communication skills, including the ability to align systems, digital design, firmware, analog, verification, validation, applications, and software/tool teams. PREFERRED QUALIFICATIONS • Master's degree or PhD in Electrical Engineering, Computer Engineering, Signal Processing, Control Systems, Power Electronics, or a related discipline., • Experience with digital power controllers, DC/DC converters, voltage regulators, power management ICs, multiphase control, or high-current datacenter power applications., • Experience with RTL architecture, SystemVerilog, Python, MATLAB, C/C++, emulation, FPGA prototyping, behavioral modeling, real-number modeling, or hardware/software co-design., • Experience with ADC controller architecture, coherent sampling, digital filtering, decimation, telemetry, protection paths, loop compensation support, or real-time control data paths., • Experience creating reusable models, reference tests, or structured engineering data that improve model-to-RTL, model-to-emulation, or model-to-silicon correlation., • Ability to work comfortably at the boundary between algorithms, hardware architecture, firmware interface definition, and silicon validation evidence. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job Description Job Summary Company NextGen Security, LLC Location Austin, TX Industries Security Integration Job Type Full Time Employee Years of Experience 3-5 years of industry experience Career Level Senior Sales Person Exemption Exempt Senior Account Manager-Austin What we're looking for: We are seeking an experienced salesperson in the security industry to join our fast-growing and dynamic team. What you'll be doing: This position will have multiple roles ranging from: developing new business, managing new and existing client needs, presenting solutions, technical knowledge for a broad range of products, working with operations and engineering on a regular basis to develop proposals and management of client security initiatives. Some overnight and out of town travel may be required. • Management of customer accounts., • Regular communication with customers., • Assist in the management of projects with the Operations team., • Work independently without supervision., • Follow-up with customers and their requests., • Development of Account Manager and assist them as needed., • Project estimating., • Business Development., • Networking with vendors, suppliers, and industry contacts., • Creation of quotes and scopes of work. What you bring to the table: • Excellent written and verbal communication skills, • A positive, collaborative attitude with a willingness to interact with customers, co-workers and other personnel, • 3-5 years of experience selling enterprise-level access control and video systems, such as Lenel, Genetec, Avigilon, and/or Software House., • Ability to manage multiple projects simultaneously with razor-sharp focus on the details, • A commitment to integrity and our Company Standards and Procedures, • BA/BS degree in business, marketing or equivalent What we bring to the table: • An awesome, collaborative culture, • Compensation based upon background and experience, • Full benefits package, • Vacation, • Cellphone Allowance We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position below. More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn't convincing enough, check out what our employees say about working at NextGen: https://www.youtube.com/watch?v=qLQVPTlAlJM Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security's HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security's website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security's HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security's HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job DescriptionAbout Base Base is America’s next-generation power company. We’re rebuilding the foundation of modern civilization–electricity–by deploying a vast network of distributed batteries that is transforming today’s fragile, centralized grid into a resilient and abundant system. We are engineers, operators, and creatives solving some of the most complex, interdisciplinary challenges of our time. About the Role Base is seeking a EH&S Engineer to support our field operations teams in Texas. As an EHS Engineer, you will perform hazard assessments, incident investigations, work through employees’ safety concerns and issues, as well as strategize with site leaders to prevent/reduce injuries. In addition, you will ensure environmental compliance with all local, state, and federal regulatory requirements applicable to these departments. What You’ll Do Develop and maintain compliance with all applicable regulations and/or guidelines established by Texas Health and Safety Codes, OSHA, NFPA, NIOSH Collaborate with department leadership to complete job hazard assessments and implement health and safety policies and procedures Execute industrial hygiene studies to analyze manufacturing byproducts against associated human health thresholds Inspect facilities, machinery, and safety equipment in order to identify and correct potential hazards, and implement machine guarding when needed Complete and maintain documented safety observations from regular hazard identification audits Investigate industrial accidents, injuries, or occupational diseases to determine root causes, corrective actions and preventive measures Develop safety solutions to resolve EHS hazards/ concerns within cost and schedule constraints following a safety order of precedence to include elimination, substitution, engineering controls, work practice controls, training, and personal protective equipment (PPE) to ensure that safety of personnel, property, and the environment are within acceptable risk boundaries Responsible for hazardous and non-hazardous waste management What You’ll Bring Bachelor’s degree in engineering with an emphasis in occupational health and safety and/or environmental engineering 3+ years of experience in the design, development and operational oversight of environmental, health and safety disciplines Demonstrated ability to research and apply the best industrial and working practices to provide effective services Knowledge of process safety management methods, pressure systems, and chemical delivery systems Strong knowledge and experience in interpreting, applying and documenting federal, state and local safety and environmental regulations Experience with emergency response communication and incident management in incidents involving hazardous and non-hazardous material releases to air, soil, and water About the Team The Environmental Health & Safety team is responsible for building and maintaining a culture where safety is embedded into every aspect of our operations. We partner closely with field, warehouse, manufacturing, and leadership teams to proactively identify risks, implement practical safety solutions, and ensure compliance across a rapidly growing operation. As Base continues to scale, the EHS team plays a critical role in protecting our employees, customers, and communities while enabling the business to move quickly and efficiently. This is a highly collaborative, hands-on team that values ownership, continuous improvement, and a proactive approach to solving complex safety and environmental challenges. If you're excited about building programs from the ground up, influencing operational excellence, and making a tangible impact on employee safety, you'll thrive here. Please note: Base is a startup, which means priorities shift and evolve quickly. Your role may expand or change based on the needs of the business at any given time, so the responsibilities listed may not be exhaustive. Our Values First Principles Thinking: Question assumptions. Principles > rules. Operate at Base Pace: Focus on what matters, act quickly, and learn by doing. Give & Get Feedback: Be direct, be humble, and maintain a growth mindset. Everyone’s an Owner: Follow through on commitments and own results. Strong Opinions, Loosely Held: Drive clarity and make calls with imperfect information. Committed to the Mission: Rebuilding the grid is a big challenge. We work hard because we care deeply about the impact we’re creating. We work in-person. It’s not a 9-to-5. We are all-in. Fun & Optimism Coexist with Grit: Collaboration and celebration coincide with the intensity of building real things. Do the best work of your life at Base.

Job DescriptionAbout us: Mythic is building the future of AI computing with breakthrough analog technology that delivers 100× the performance of traditional digital systems at the same power and cost. This unlocks bigger, more capable models and faster, more responsive applications—whether in edge devices like drones, robotics, and sensors, or in cloud and data center environments. Our technology powers everything from large language models and CNNs to advanced signal processing, and is engineered to operate from –40 °ree;C to +125 °ree;C, making it ideal for industrial, automotive, aerospace, and defense. We’ve raised over $100M from world-class investors including Softbank, Threshold Ventures, Lux Capital, and DCVC, and secured multi-million-dollar customer contracts across multiple markets. Mythic's Digital Design Team is seeking a Silicon Emulation Engineer to support the development and validation of AI accelerator and AI-centric SoCs using hardware emulation platforms. This role is critical to enabling early bring-up, software validation, and performance analysis of neural network accelerators prior to silicon availability. The engineer will work closely with RTL, verification, compiler, firmware, and ML software teams to ensure functional correctness, performance targets, and system-level integration of AI workloads.What You'll Do • Develop and maintain emulation platforms for AI accelerator / AI-centric SoCs, • Integrate large-scale RTL (compute, DMA, memory subsystems, interconnects) into emulation environments, • Enable early firmware, driver, runtime, and ML stack bring-up on emulated hardware, • Support execution of AI inference workloads (e.g., CNNs, transformers) on emulated Mythic accelerators, • Collaborate with compiler, runtime, and ML teams to debug HW/SW co-design issues, • Develop scripts and automation for emulation builds, regressions, and workload execution, • Analyze performance, bandwidth utilization, latency, and throughput of AI workloads in emulation, • Debug complex issues spanning RTL, firmware, drivers, and user-space ML frameworks, • Support post-silicon correlation and performance validation when applicable, • Document emulation flows, performance methodologies, and debug proceduresWhat We're Looking For, • Bachelor’s, Master's, or Doctorate degree in Electrical Engineering, Computer Engineering, Computer Science, or related field, • Strong understanding of SoC architectures and AI accelerator design concepts, • Experience with RTL simulation and emulation (Verilog/SystemVerilog), • Familiarity with hardware emulation platforms (e.g. Cadence Palladium), • Experience working in Linux-based environments, • Proficiency in scripting (Python, Tcl, Bash), • Strong debugging skills across hardware and software layersNice to Have, • Experience with NPU, DSP, or GPU-class accelerators, • Experience running or debugging ML inference workloads on pre-silicon platforms, • Knowledge of AI software stacks (runtime, compiler, graph execution), • Familiarity with DMA engines, memory hierarchies, and high-bandwidth interconnects, • Understanding of AXI/AMBA protocols and cache coherency, • Experience with FPGA prototyping or hybrid emulation flows, • Exposure to performance modeling or architectural trade-off analysisThe proposed salary range for this position is $120,000–$225,000 annually. Actual compensation depends on experience, skills, qualifications, and location.At Mythic, we foster a collaborative and respectful environment where people can do their best work. We hire smart, capable individuals, provide the tools and support they need, and trust them to deliver. Our team brings a wide range of experiences and perspectives, which we see as a strength in solving hard problems together. We value professionalism, creativity, and integrity, and strive to make Mythic a place where every employee feels they belong and can contribute meaningfully.

Job DescriptionHelp Bring Obsolete Semiconductors Back to Life At Phoenix Semiconductor Corporation (PSC), we're solving one of the industry's most challenging problems—replacing obsolete integrated circuits. Our products are drop-in replacements that enable aerospace, defense, industrial, medical, and commercial systems to continue operating for decades. Every device we release must prove it performs like—or better than—the original. About the Role We are seeking an experienced Test Engineer to design, develop, and deploy test programs for our Multi-Chip Module (MCM) and System-in-Package (SiP) products. We also need someone to architect and setup a test environment. The ideal candidate can take a component datasheet and independently translate its electrical, functional, and timing requirements into a working test program. You must be able to obtain a US security clearance. What You'll Own As our senior test engineer, you'll define how every PSC product is validated before it reaches our customers. You'll work closely with design engineering, quality, manufacturing, and supply chain to develop qualification strategies, analyze performance data, and ensure every replacement device meets electrical, thermal, mechanical, and reliability requirements. This is a highly visible role where you'll help establish the testing processes and standards that support the future growth of the company. Key Responsibilities • Datasheet-to-Test-Program Development: Analyze semiconductor part datasheets (digital, analog, mixed-signal, RF, or power devices) and translate electrical specifications, timing diagrams, and functional requirements into comprehensive test plans and executable test programs., • Test System Architecture: Help design, build, and maintain an in-house PXI type (National Instruments or equivalent) modular bench test system — selecting chassis, modules (DMM, scope, DIO, power supplies, switching), and instrumentation to cover the electrical test needs of our product lines., • Test Program Design: Develop, debug, and validate test programs/software (e.g., LabVIEW, TestStand, Python with instrument drivers) for functional, parametric, and characterization testing at the board/module level., • Boundary Scan & JTAG Test: Develop and execute boundary scan (JTAG/IEEE 1149.1) test strategies for interconnect verification, programming, and structural test of assembled boards and modules., • MCM/SiP Test Strategy: Design test methodologies appropriate for multi-component modules, including interconnect/bond verification, thermal considerations, and system-level functional test of integrated packages. Contribute to future KGD test strategy discussions., • Test Fixture & Interface Development: Define and collaborate on test fixtures, interface boards, and cabling/connector solutions needed to interface the test system with the unit under test., • Correlation & Characterization: Perform bench-to-bench and unit-to-unit correlation, guard banding, and basic statistical analysis to ensure test coverage and repeatability., • Cross-Functional Collaboration: Partner with design engineering, package engineering, product engineering, and quality teams to resolve test escapes, board-level failures, and design-for-test (DFT) concerns., • Documentation: Create and maintain test specifications, test flow documentation, and test result/data logs., • Production Support: Support new product introduction (NPI), test program qualification, and ongoing test process improvement., • Debug & Failure Analysis: Investigate test failures, working with design and failure analysis (FA) resources to root-cause issues at the component, interconnect, or module level.Required Qualifications, • US Citizen, must be able to obtain a US security clearance., • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field (or equivalent practical experience)., • 7+ years of hands-on semiconductor, board-level or module-level test engineering experience., • Demonstrated ability to read and interpret semiconductor datasheets and convert specifications into test plans and test programs without heavy hand-holding., • Hands-on experience with boundary scan / JTAG (IEEE 1149.1) test development and tools (e.g., Corelis, ASSET InterTech, JTAG Technologies, XJTAG, or similar)., • Experience building or programming test systems on a modular instrumentation platform such as PXI/PXIe (National Instruments or equivalent), VXI, or LXI-based bench setups., • Proficiency with LabVIEW, TestStand, and/or Python (with instrument drivers such as VISA/SCPI) for test automation., • Solid understanding of analog, digital, and/or mixed-signal test techniques (DC parametric, functional, AC timing, and/or RF as applicable to your product mix)., • Comfort working with general-purpose lab instrumentation (DMMs, oscilloscopes, power supplies, function generators, switch matrices) and designing test fixtures/interfaces around them., • Strong problem-solving skills and comfort working independently to build test capability from the ground up in a fast-paced NPI environment., • Familiarity with JEDEC, MIL-STD-883, AEC-Q100/Q101, or similar standards Preferred Qualifications • Experience standing up a test system from scratch — selecting PXI/PXIe chassis and modules, building a mixed instrumentation rack, and developing the software architecture to drive it., • Familiarity with known-good-die (KGD) methodologies and multi-die test strategies — a plus for future roadmap needs, not required today., • Experience with semiconductor package-level JESD47 “Qualification Testing” thermal, mechanical, or reliability tests (e.g., burn-in, temp cycling, THB, ESD, etc…)., • Familiarity with die-to-die or component interconnect technologies (wire bond, flip chip, SMT) and how they affect test approach., • Familiarity with PCB manufacturing process and test (Flying probe, AOI, X-ray, etc..)., • Experience with design-for-test (DFT) collaboration during early product development, including boundary scan chain design input., • Experience with version control, test data management, and basic database/reporting tools for test result tracking., • Six Sigma, quality systems, or reliability engineering exposure., • Failure analysis experience (X-RAY, CSAM, cross-sectioning, curve tracing, etc…), • Knowledge of ATE platforms (Teradyne, Advantest, or equivalent). You'll Thrive Here If You • Enjoy building processes where none exist, • Like solving complex engineering challenges, • Can balance technical depth with practical execution, • Communicate clearly with engineers and executives alike, • Want your work to have immediate impact on company successWhy Phoenix Semiconductor? You'll join a growing semiconductor startup where your work directly influences the products we ship—not one small piece of a much larger organization. You'll have the opportunity to: • Build testing methodologies that become company standards, • Work across the entire product lifecycle, • Influence engineering decisions early in development, • Collaborate with experienced semiconductor leaders, • Help solve component obsolescence for industries where reliability matters mostLocation This position is based in Austin, Texas and requires regular work in our engineering lab. Occasional domestic travel may be required to support customers, suppliers, and qualification activities. Phoenix Semiconductor Corporation is an Equal Opportunity Employer including individuals with disabilities and protected veterans. We are committed to ensuring equal employment opportunity for all applicants and employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.” Powered by JazzHR Rx6mDI4kL8

Job DescriptionCompany Description Renesas Electronics Americas (REA) is a dynamic, multi-cultural tech company where employees can learn, mentor and thrive. REA brings together the strong financial foundation of a multi-billion dollar global operation and the flexibility and velocity of a smaller organization. We are developing technologies for the latest advances in mobile computing, secured connected devices, autonomous driving, smart homes and factories and more. Our solutions are at the heart of products developed by the major innovators around the world. Join us and be part of what’s next in electronics. This is an opportunity to join a top-notch low-voltage power MOSFET design team. As part of Renesas’s Mobility, Infrastructure and IoT Power Business Division, this Engineer will work on next-generation power MOSFET products for multiple markets. Job Description We are seeking a Principal Device Design Engineer to develop cutting-edge switching power MOSFETs for 12V to 80V applications. You will participate in the full product cycle, from the conception of the architecture through final product characterization. This will involve the development of novel device structures, optimization for performance and ruggedness using TCAD simulation, and development of test and characterization methods to demonstrate device capability and limits. You will interface with process integration engineers to develop cost-effective, manufacturable designs and consult with IC design teams developing the MOSFET drivers. If you like problem-solving and challenging the status quo, we’d like to hear from you. What You'll Do • Develop high-performance power switching devices based on fundamental physical principles and available manufacturing capabilities, • Develop proprietary process flows and identify critical design parameters and process variation sensitivities that affect manufacturability, • Develop simulation experiments to identify critical process and design parameters and center them for reliability, performance, and manufacturability, • Work closely with fab process engineers toward the development of new process recipes and design rules, • Develop intelligent process and layout experiments for engineering lots to minimize development cycle time, • Execute test mask and product mask layouts with support from CAE team, • Identify testing requirements and techniques for new technologies and advise during characterization and testing, • Analyze measured data on devices and test structures to optimize device design and process, • Provide engineering support for existing power semiconductor products to maintain yield and performanceQualifications, • Expertise in one or more of the following areas, • Power Semiconductor Devices, • Semiconductor Device Physics, • Semiconductor Device Reliability, • Semiconductor Manufacturing, • Materials Science, • TCAD modeling and simulation, • Device layout, • Understanding of switched-mode power applications, • Implications of packaging and PCB parasitics during switching, • Implications of package and PCB materials on thermal characteristics, • Influence of / requirements for MOSFET driver, • Desired experience, • Demonstrated track record of commercially successful power MOSFET developments, • Direct experience in advanced Switching Power MOSFET structures, • Education, • M.S. or Ph.D. in relevant field with 7+ years’ experience in power semiconductor device engineering Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job Description Location: Austin, TX Pay: Starting at $22.00/hour Position Type: Full-Time, Temp-to-Hire About the Opportunity We're seeking a motivated Inside Sales Representative to support sales growth through customer engagement, distributor relationship management, and solution-based selling. This role is ideal for someone who enjoys building relationships, solving problems, and working in a technical sales environment. The Inside Sales Representative will identify customer needs, recommend testing and equipment solutions, support channel partners, and assist customers throughout the sales process. This position offers an excellent opportunity to develop technical expertise while building a rewarding career in sales. Key Responsibilities • Build and maintain strong relationships with distributors, channel partners, and customers., • Drive sales growth through proactive outreach, follow-up, and opportunity development., • Identify customer requirements and recommend appropriate products, services, and testing solutions., • Support the sales process from initial inquiry through order fulfillment and customer follow-up., • Collaborate with engineering, operations, and customer support teams to deliver effective solutions., • Develop product and application knowledge to provide technical guidance and support., • Assist customers with training, troubleshooting, and problem resolution., • Maintain accurate customer records, activities, and sales opportunities within CRM systems., • Track pipeline activity and contribute to sales forecasting efforts., • Support business development initiatives and revenue growth objectives. Qualifications Required • 3+ years of experience in inside sales, technical sales, distributor management, account management, or customer-facing sales roles., • Strong communication and relationship-building skills., • Ability to learn technical products, applications, and sales processes., • Experience using Microsoft Office and CRM software., • Strong organizational skills and attention to detail., • Ability to manage multiple priorities in a fast-paced environment., • High school diploma or equivalent. Preferred • Bachelor's degree in Business, Marketing, Engineering, or a related field., • Fluent in Spanish., • Experience working with distributors, manufacturers, industrial products, technical services, laboratory services, or related industries., • Background in consultative or solution-based sales. Compensation & Benefits • Starting pay of $22.00 per hour, • Full-time schedule, • Temp-to-hire opportunity with long-term career potential, • Opportunity for professional growth and advancement, • Collaborative team environment, • Ongoing training and development Apply Today If you're a relationship-focused sales professional who enjoys helping customers find solutions and wants an opportunity to grow into a long-term career, we'd love to hear from you.

Job DescriptionCompany Description The High-Performance AI and Compute (HPAC) product line—part of the Performance Computing Power (PCP) division—develops high‑performance digital multiphase voltage regulator solutions for AI, cloud infrastructure, data centers, and emerging computing markets. As Product Marketing Manager for the HPAC product line, you will own the complete product lifecycle for a family of power stage products. You will establish product visions, define market strategy, champion customer needs, and lead cross-functional teams to deliver best-in-class power management products that set industry standards. Job Description Product Strategy & Planning Define product strategy, roadmap, and portfolio for target markets (AI, servers, data centers, networking, telecom, and computing) Conduct competitive analysis and monitor market dynamics to inform strategic positioning Develop business cases and market requirements documents for new product concepts Identify and recommend features that keep our portfolio at the cutting edge Product Development & Delivery Partner with applications engineering, design, product engineering and test engineering teams to develop and launch products Provide clear direction to the product development team, fostering collaboration and innovation Ensure alignment between engineering execution and market requirements Go-to-Market & Sales Develop compelling sales collateral, customer presentations, and competitive analysis Create customer-facing documentation that clearly communicates value proposition and differentiation Manage pricing strategy, quotes, and cost structures for assigned products Cross-Functional Leadership Collaborate with peer product managers to define integrated, end-to-end solutions Stay current with technology trends and emerging market needs to inform decision-making Work effectively with distributed teams across multiple global offices Documentation & Communication Develop comprehensive product documentation, training materials, application notes, and technical errata Translate complex technical concepts into clear, compelling messages for diverse audiences Qualifications • BSEE or related fields with 5+ years of experience in business development, field applications engineering, marketing or related roles. MSEE or MBA is a plus., • Understanding of power management applications and products., • Experience in data center, servers, telecom, networking and/or computing markets., • High energy, self-motivated, and go-getter attitude., • Excellent written and oral communications skills. Ability to present complex concepts in a clear, concise and effective way., • Excellent interpersonal skills. Ability to work effectively with teams located in multiple offices around the world., • Ability to collaborate and be effective in a fast-paced environment. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job Description Exowatt is revolutionizing the energy landscape for the AI era with our groundbreaking P3 system that captures solar energy, stores it as heat, and generates electricity on demand. Founded in 2023 and backed by leading investors including Andreessen Horowitz, Sam Altman, and Felicis, we're committed to providing clean, modular, and scalable power that meets the rapidly growing demands of AI infrastructure. Our mission is to make sustainable renewable energy always available and almost free, enabling technological advancement while protecting our planet. We are looking for a Controls & Firmware Engineer to help design and implement the control architecture for our scalable thermal energy storage system. This hands-on role involves both PLC programming and embedded firmware development, giving flexibility as we evolve our platform from industrial controllers to custom microcontroller-based solutions. The engineer will also contribute to building test benches, CI/CD pipelines, and GitHub-based workflows to ensure high reliability and rapid iteration. This position is based in Austin, TX, however an alternate location of Miami, FL is possible for the right candidate. If hired for this role, relocation to one of these sites is required. We provide relocation assistance. Key Responsibilities • Controls (PLC Path), • Develop and test PLC programs (Siemens, Rockwell, or equivalent) for system,, • module, and site-level controllers., • Implement safety interlocks, alarms, and operational sequences for energy storage, • modules., • Configure and validate industrial communication protocols (Profinet, Ethernet/IP,, • OPC UA, DNP3, MQTT)., • Integrate different system components with Microcontroller based devices., • Set up and maintain a test bench / HIL environment for PLC validation., • Firmware (Microcontroller Path), • Design and implement embedded firmware in C/C++ (Rust optional) for, • microcontrollers if we migrate from PLC-based controls., • Develop and test communication stacks, device drivers, and OTA update, • mechanisms., • Ensure deterministic, real-time operation in power and energy storage applications., • Set up and maintain a test bench / HIL environment for validation., • DevOps & CI/CD, • Build and maintain CI/CD pipelines (GitHub Actions or similar) for PLC code, firmware,, • and test automation., • Implement version control best practices for branching, releases, and tagging, • safety-critical builds., • Develop infrastructure to run automated test suites including regression, simulation,, • and hardware-in-the-loop., • Energy Storage Integration, • Apply knowledge of utility-scale energy storage systems (battery management, PCS, • interfaces, dispatch logic)., • Participate in the development of control panel design for various components of energy, • storage system., • Design & develop EMS/SCADA application to map controls data into historians, HMIs,, • and cloud telemetry systems for monitoring & management of the system., • Support system integration, commissioning, and field validation.Qualifications, • Bachelor’s in Electrical, Controls, Computer Engineering, or related field., • 2–6 years of experience in PLC programming and/or embedded firmware development., • Proficiency with Siemens TIA Portal / Rockwell Studio 5000 (or similar)., • Strong coding skills in C/C++ (Rust/Python a plus)., • Experience with GitHub workflows, CI/CD pipelines, automated testing., • Familiarity with utility-scale energy systems or DERs., • Understanding of industrial networking and protocols (Profinet, Ethernet/IP, OPC UA,, • DNP3, MQTT).Preferred Skills, • Exposure to energy storage standards (UL 9540, IEC 62443, IEC 61131-3, IEEE, • 1547)., • Knowledge of cloud-integrated controls (AWS IoT Core, InfluxDB, Timestream,, • CloudWatch)., • Experience setting up test benches, simulators, or hardware-in-the-loop systems. What We Offer: Competitive salary and equity options. Comprehensive benefits package, including health, dental, and retirement plans. A dynamic work environment that fosters creativity and innovation. Opportunities for professional growth and development in a rapidly evolving industry. Relocation assistance. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Controls Integration Engineer Location: Austin, Tx Reports To: Solutions Architect, 5K Automation and Controls Employment Type: Full-Time 5K Controls is a newly established building automation and energy management company affiliated with Hays Electrical Services — a nationally recognized electrical contractor with over 19 years of experience delivering safe, high-quality electrical solutions across commercial, industrial, and specialty markets. Built on the same foundation of safety, excellence, drive, communication, and client focus that defines Hays, 5K was created to meet the growing demand for intelligent, scalable BAS/EMS solutions across enterprise and multi-site portfolios nationwide. Our mission is simple: to make ourselves indispensable to our clients by delivering technically sound, commercially smart building automation solutions that perform. Position Summary The Controls Integration Engineer is responsible for the technical design, programming, and integration of BAS/EMS systems across 5K’s project portfolio. This role translates project scopes, sequences of operations, and client requirements into fully engineered control solutions — from DDC programming and graphics development through system integration and commissioning support. The Controls Integration Engineer works closely with the Solutions Architect, project managers, and field installation teams to ensure that every system 5K delivers is technically sound, properly documented, and fully functional at handover. Key Responsibilities • Design, program, and configure DDC control systems for BAS/EMS projects, including controller programming, graphics development, network configuration, and system integration, • Develop sequences of operations, control narratives, and point lists in accordance with project specifications, design documents, and 5K’s engineering standards, • Integrate BAS/EMS systems with third-party equipment and building subsystems including HVAC equipment, lighting, meters, and IP-based devices via BACnet, Modbus, and other open protocols, • Conduct factory acceptance testing (FAT) and provide on-site startup and commissioning support for 5K-managed projects, • Develop and maintain project engineering documentation including as-built drawings, submittal packages, O&M manuals, and commissioning records, • Coordinate with the Solutions Architect to ensure project designs are implemented accurately and that any field-level design changes are properly documented, • Provide technical support to project managers, field technicians, and commissioning agents throughout project execution, • Support the development of 5K’s standardized engineering templates, sequence libraries, and platform configuration standards, • Troubleshoot integration issues and resolve technical problems during and after project installation, • Participate in technical training, manufacturer partner programs, and continuing education relevant to BAS/EMS integrationQualifications & Skills Required • 3-7 years of hands-on experience programming and integrating building automation systems in commercial environments, • Proficiency in at least one major open-protocol BAS platform: Niagara/Tridium, BACnet IP/MSTP, Distech Controls, or equivalent, • Experience developing DDC programs, graphics, and trend logs for HVAC controls applications, • Working knowledge of system integration protocols including BACnet, Modbus, and LON, • Ability to read and interpret mechanical, electrical, and controls drawings and sequences of operations, • Strong troubleshooting skills with the ability to diagnose and resolve integration and communication issues independently, • Bachelor’s degree in electrical engineering, mechanical engineering, building systems, or a related technical field, or equivalent experience Preferred • Hands-on experience with Tridium-Niagara, Distech, or Delta Controls platforms, • Experience with multi-site or national rollout deployment programs, • Familiarity with energy metering, demand response, or EMS analytics platforms, • Niagara N4 & AX certifications or equivalent manufacturer certification Why Join? At 5K Automation and Controls, you’re joining a ground-floor opportunity with the backing of an established, financially strong parent organization. You’ll have the resources to do your best work, a team invested in your success, and a culture built on accountability, collaboration, and excellence. If you’re ready to grow with a company that is redefining what a controls company can be — we want to hear from you. Powered by JazzHR Wjtuh2NkIX

Job Description Fathoms is a defense technology company building Brilliant Machines™. We believe that our in-person work environment is a cornerstone of our success, and have teams in Austin, Texas; Cody, Wyoming; and Washington, D.C. We are looking for a curious, creative, and mission-driven Lead Design Engineer with a technical foundation who is naturally fascinated by the challenges and detail work in enabling industrial automation. This role requires a hands-on engineer able and willing to personally perform design tasks from CAD to prototype assembly to laboratory testing. This position will be instrumental in developing disruptive gearbox prototypes. The Fathom5 Lead Design Engineer will: • Assist senior engineers with CAD modeling, product prototyping, and testing, • Design, Procure, and/or print machine components including prime movers, instruments, controls, and machined/printed parts, • Support the Fathom5 engineering team in the design of novel industrial automation solutions, • Prepare and organize documentation of key product decisions and design changes, • Work with software and electrical engineering teams to integrate new technologies into our Tesar Actuators, • Translate client desires into tangible deliverables, • Test products for functionality, • Assemble hardware according to design specifications and ensure on-time delivery of Fathom5 Tesar Power Actuators, • Contribute to Company development meetings, on-cadence stand-up, and demo days, • Learn the Fathom5 product line and make product improvement recommendations, • Collaborate with team members to help merge the physical assembly, hardware integration and software integration of our product linesThe Fathom5 Lead Design Engineer position requires:, • Design knowledge – Working knowledge of machine detailing and design., • Proven Innovation – Listed Inventor on US Patent, Completed Professional or Personal custom machinery project, prior primary design authority for a novel gearbox, or experience in an R&D Engineering group., • Proficiency with design tools – Experience with Computer Aided Design (CAD) tools, • Proficiency with shop/assembly tools – Knowledge of hand and power tools used to assemble machines in a prototype shop and the ability to use those tools to deliver quality prototypes., • Clear and effective communication – Written and oral communication skills sufficient to explain and document technical findings in an articulate manner., • Quick learning – The ability and desire to quickly learn new technology., • Team-first mentality – The ability and desire to work in a team environment., • Startup Stamina – Fathom5 is changing the world at the intersection of industrial systems and advanced software. Sometimes changing the world requires long hours, standing for full days at events, and medical clearance for building and testing actuator prototypes as well as occasional travel in support of our customers. Ultimately, a successful Lead Design Engineer provides valuable support to the design team while continually improving their engineering knowledge and skills. The Fathom5 Lead Design Engineer is an intermediate position and will have these credentials: • B.S. from an accredited four-year university in Engineering (preferably Mechanical, Aerospace, or Civil), • 5-10 years of experience in an engineering environment, • Capable of executing gearbox design from operating requirements Preferred knowledge and experience:, • Design of control systems including PID feedback loops., • Specification and selection of electrical motors for actuation, • Instrumentation of actuators for data acquisition and control At Fathom5, we believe that a diverse, equitable and inclusive workplace makes us a more relevant and resilient company. We welcome people from all backgrounds, ethnicities, cultures, and experiences. Fathom5 provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Product Test Engineer to our team. If you enjoy working in a startup environment, and are passionate about circuit theory, troubleshooting, and truly enjoying discovering the root cause when problems arise, we would like to hear from you. In this position, you will provide engineering support and practical problem-solving in a dynamic, high-paced production setting. This role focuses on ensuring product performance, yield optimization, and reliability through direct support of manufacturing operations. You will support root cause analysis, help with design-to-production transitions, and collaborate closely with cross-functional teams to resolve complex technical issues and continuously improve processes. JOB DUTIES AND RESPONSIBILITIES: • Provide hands-on technical support for PCBA and RF/microwave products during production, ensuring smooth manufacturing operations., • Assist with troubleshooting and root cause analysis of PCBA and RF-related production issues, including yield losses, test failures, and product deviations., • Support hardware/software debugging of digital logic, embedded systems, and mixed-signal interfaces., • Support Low-Rate Initial Production (LRIP) and transition to consistent production., • Perform engineering work and applied research with Test Equipment group to ensure quality standards and functional objectives are met., • Collaborate with design engineering teams to influence DFM (Design for Manufacturability) and DFT (Design for Test) practices., • Support process improvement efforts to enhance product performance, reduce costs, and increase throughput., • Provide hands-on engineering guidance and real-time problem-solving within a fast-paced production environment., • Monitor yields, test margin and resolution of technical issues impacting production., • Investigate complex problems involving the design and production of complex digital, RF, and baseband communications hardware (Digital, RF, and analog circuitry)., • Assist with problem containment and structured root cause & corrective action investigations.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS:, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 5 years of relevant experience supporting a production environment., • Experience in the design, production and test of microwave communications hardware and assemblies., • Strong knowledge of PCB-level debugging, embedded systems, and hardware/software integration., • Excellent troubleshooting, data analysis, and problem-solving skills., • Ability to collaborate across functional teams with a proactive approach to addressing technical challenges on the production floor., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE:, • Experience in aerospace, defense, automotive, or industrial electronics industries., • This position crosses the boundaries between Engineering and Operations – Expertise in both domains is desired. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Amphenol is one of the world's largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Defense, Industrial, Information Technology and Data Communications, Mobile Devices and Mobile Networks. Amphenol's organization philosophy is based on a decentralized structure which operates with high level of autonomy to empower individuals with an unparalleled culture of entrepreneurship. Power Solutions Group, a business unit of Amphenol, is the market leader for power electrical connectors and cables for the Telecom/Datacom Market serving (Storage, Servers, Networks, etc.). We are currently seeking Power System Engineer to join our team located in Texas. This role will report directly to the Senior Engineering Manager in Power Solutions Group. RESPONSIBILITIES: • The Power System Engineer job is to design and development of Power connector and Cable., • Your job is to provide power solutions to data center, telecom, industrial, and automotive customers. Work closely with key customers and management to develop custom products., • Create drawing, specification documents required to define and build products: drawings, material specifications, bills of materials and manufacturing processes. Work with cross-functional, multi-site teams to develop solutions., • Provide technical support to Sales and marketing personnel including technical training, presentations and customer visits., • Coordinate, analyze and assess testing and qualifications to insure product conformity with specifications. Assess the quality and functionality of prototypes and samples for customer use and adherence to performance standards., • Provide support to manufacturing facilities on cost down, quality, customer issues., • Stay abreast of technological developments in the connector and interconnection industries., • Apply patent request when applicable to protect intellectual property. QUALIFICATIONS: • B.S. in Mechanical Engineering, or related field, • 8 years above connector/cable design working experience., • Experience in connector industry, some knowledge of server/storage/networking/data center rack level architectures preferred., • Working Experience with Data Center Power connector/cable is plus., • Good knowledge in OCP open rack structure is a plus., • Skill: Windchill #LI-RR1 Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. Amphenol is an “Equal Opportunity Employer” - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin. For additional company information please visit our website at https://www.amphenol-cs.com/

Job DescriptionAbout Yotta Energy AI is driving explosive growth in data center demand, and the electricity grid that powers it is undergoing its biggest transformation in a century. Meeting that demand while accelerating the shift to clean energy will take more than new generation - it will take smarter, more flexible infrastructure that can balance supply and demand in real time. Yotta Energy is building that infrastructure. We design and deploy the hardware and software behind commercial-scale distributed energy resources (DER), and we're now aggregating that fleet into Virtual Power Plants (VPPs) - networks of batteries and solar assets that act as a single, intelligent resource for the grid. It's a direct, tangible way to support the clean energy transition: turning distributed storage into grid-scale flexibility, unlocking new value for our customers, and helping the grid absorb the load growth AI itself is creating. About the Role We're looking for a Principal Software Engineer to provide technical leadership across our platform, from architecture decisions that improve reliability, performance, observability, and security, to hands-on mentorship that raises the bar for the whole team. You'll help design shared services and reusable patterns that keep our products interoperable and consistent, while staying close to the firmware, hardware and systems that make our platform work in the real world. Key Responsibilities • Lead architectural decisions that improve reliability, performance, observability, security, and operational excellence across our product ecosystem, • Be the engineering lead on projects. Working from ideation to implementation to rollout, • Architect web, cloud, and device-integrated solutions across our distributed Linux fleet as part of a unified product experience, • Design state machines, device controls, command/acknowledgment flows, and fail-safe behavior for connected devices, • Build reliable, fault-tolerant systems that gracefully handle connectivity loss, retries, device failures, and offline operation, • Conduct design and code reviews, • Evaluate emerging technologies and apply them to solve complex business and technical challenges, • Mentor engineers and technical leads, and drive adoption of architectural best practices, • Collaborate cross-functionally to troubleshoot issues spanning cloud, network, gateway, and device layers Required Qualifications • 10+years of software engineering experience, including 3+ years owning software architecture and distributed systems design decisions at scale, • Strong proficiency in TypeScript/Node.js, Python, or Go, • Strong knowledge of distributed systems, APIs, networking, concurrency, Linux, and event-driven architectures, • Experience managing and troubleshooting distributed fleets of Linux machines, • Strong troubleshooting skills across cloud, network, gateway, and device layers, • Strong technical leadership, mentoring, and cross-functional communication skills Preferred Qualifications • Experience with React and building complex, stateful web applications, • Experience with AWS, cloud-native architectures, serverless, and modern integration patterns, • Experience with IoT/edge systems and hardware communication protocols (MQTT, Modbus, or similar), • Experience with Docker, CI/CD, SQL, and time-series/telemetry data, • Experience with automated testing, observability, and production deployments, • Energy, ESS, solar, inverter, EV charging, DER, SCADA, or industrial IoT experience preferred but not required Who May Not Be a Fit • Prefer to work independently without collaborating across teams, • Struggle with ambiguity, competing priorities, or tight deadlines, • Aren’t willing to roll up your sleeves and help wherever needed, • Avoid accountability or have difficulty receiving and acting on feedback What We Offer • Competitive salary up to $175,000 annually, based on experience, • Comprehensive medical, dental, and vision insurance, • 401(k) plan with company match, • Paid time off and company holidays, • A collaborative, mission driven culture where every team member makes an impact, • The opportunity to work on innovative clean energy technology, • Career growth and professional development opportunities, • Exposure to cutting edge energy storage systems, power electronics, and cloud-connected technologies Work Authorization Candidates must be authorized to work in the United States on a full-time basis. Yotta Energy is unable to provide current or future employment visa sponsorship for this position. Why Join Yotta Energy? At Yotta Energy, you'll do more than fill a role you'll help build technology that's changing the future of commercial solar and energy storage. We're a growing company where ideas are encouraged, initiative is recognized, and every employee has the opportunity to make a meaningful contribution. You'll work alongside talented professionals who are passionate about solving complex challenges and bringing innovative products to market. Because we're a lean, collaborative organization, you'll have the opportunity to take ownership of your work, expand your skills, and see the direct impact of your contributions. If you're looking for a place where you can grow your career while helping accelerate the transition to cleaner, more reliable energy, we'd love to hear from you. Powered by JazzHR 6nTivnHnfM

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Product Test Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge manufacturing processes for high-reliability, high-volume satellites, we would like to hear from you. In this position, you are responsible for the analysis, and implementation, execution of engineering test plans and procedures. The ideal candidate possesses a strong combination of hardware and software knowledge with proficiencies in test equipment, test architectures, and automation. The successful candidate will work closely with multi-disciplinary teams to address company-wide hardware test needs. Engineers on this team must have working knowledge of overall schematics, operations, manufacturing, testing. Core day-to-day responsibilities include collaborating with engineering teams to lead and develop test requirements, mapping requirements to reusable test architectures and procedures, implementing test plans and procedures, and logging and presenting results to key stakeholders. Additional responsibilities include lab and equipment management and guiding key equipment purchase decisions. Evaluate non-conformances to determine root cause and create actionable items and system improvements. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A Bachelor of Science (BS) with 2+ years of experience in Mechanical, Electrical, Industrial, or Manufacturing Engineering., • Demonstrated experience in the development and implementation of test systems., • Applied experience in test optimization for manufacturing environments., • Test architecture design and development including scripting, test executives, hardware, and measurement abstraction layers., • Programming or scripting experience (Python or C#)., • Excellent written and verbal communication skills., • Demonstrated engineering intuition, critical thinking, and comfort with ambiguity., • Experience writing test plans, procedures and providing go/no-go judgment and rationale., • Experience in a production environment.PREFERRED EXPERIENCE, • Programming or scripting experience (MATLAB, C/C++, etc.)., • Proficiency with statistics and metrology., • Understanding of RF and mixed-signal hardware (e.g. amplifiers, filters, ADCs/DACs, antennas). CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Fathoms is a defense technology company building Brilliant Machines™. We believe that our in-person work environment is a cornerstone of our success, and have teams in Austin, Texas; Cody, Wyoming; and Washington, D.C. We are looking for a curious, creative, and mission-driven Lead Design Engineer with a technical foundation who is naturally fascinated by the challenges and detail work in enabling industrial automation. This role requires a hands-on engineer able and willing to personally perform design tasks from CAD to prototype assembly to laboratory testing. This position will be instrumental in developing disruptive gearbox prototypes. The Fathom5 Lead Design Engineer will: • Assist senior engineers with CAD modeling, product prototyping, and testing, • Design, Procure, and/or print machine components including prime movers, instruments, controls, and machined/printed parts, • Support the Fathom5 engineering team in the design of novel industrial automation solutions, • Prepare and organize documentation of key product decisions and design changes, • Work with software and electrical engineering teams to integrate new technologies into our Tesar Actuators, • Translate client desires into tangible deliverables, • Test products for functionality, • Assemble hardware according to design specifications and ensure on-time delivery of Fathom5 Tesar Power Actuators, • Contribute to Company development meetings, on-cadence stand-up, and demo days, • Learn the Fathom5 product line and make product improvement recommendations, • Collaborate with team members to help merge the physical assembly, hardware integration and software integration of our product linesThe Fathom5 Lead Design Engineer position requires:, • Design knowledge – Working knowledge of machine detailing and design., • Proven Innovation – Listed Inventor on US Patent, Completed Professional or Personal custom machinery project, prior primary design authority for a novel gearbox, or experience in an R&D Engineering group., • Proficiency with design tools – Experience with Computer Aided Design (CAD) tools, • Proficiency with shop/assembly tools – Knowledge of hand and power tools used to assemble machines in a prototype shop and the ability to use those tools to deliver quality prototypes., • Clear and effective communication – Written and oral communication skills sufficient to explain and document technical findings in an articulate manner., • Quick learning – The ability and desire to quickly learn new technology., • Team-first mentality – The ability and desire to work in a team environment., • Startup Stamina – Fathom5 is changing the world at the intersection of industrial systems and advanced software. Sometimes changing the world requires long hours, standing for full days at events, and medical clearance for building and testing actuator prototypes as well as occasional travel in support of our customers. Ultimately, a successful Lead Design Engineer provides valuable support to the design team while continually improving their engineering knowledge and skills. The Fathom5 Lead Design Engineer is an intermediate position and will have these credentials: • B.S. from an accredited four-year university in Engineering (preferably Mechanical, Aerospace, or Civil), • 5-10 years of experience in an engineering environment, • Capable of executing gearbox design from operating requirements Preferred knowledge and experience:, • Design of control systems including PID feedback loops., • Specification and selection of electrical motors for actuation, • Instrumentation of actuators for data acquisition and controlAt Fathom5, we believe that a diverse, equitable and inclusive workplace makes us a more relevant and resilient company. We welcome people from all backgrounds, ethnicities, cultures, and experiences. Fathom5 provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description WE ARE SEEKING software developers and embedded engineers with 4+ years of experience. At Sparx you will work with clients on projects involving everything from embedded microcontrollers, to media and image processing, to Bluetooth and TCP communications, to server-side database, web, and mobile app development. Our engineers work across C and C++ on bare-metal and RTOS targets, VHDL for FPGA designs, Embedded Linux with Yocto or Buildroot, Python for tooling, test automation, and data analysis, and C# and .NET for desktop applications and services. As such, you should have a proven track record of being able to pick up new languages and technologies, be multi-faceted in your skillset and interests, and preferably have some history of "tinkering" in your spare time. We operate across many fields such as aerospace, oil and gas, medical, robotics, industrial automation and consumer products. You will be exposed to many types of technology and have the opportunity to hone your current expertise and learn skills both within and outside of the software engineering spectrum, such as electronics and advanced data analysis. You will be working in small teams with other highly skilled engineers and developers to create products and software services from most every industry. Expect to be constantly challenged as part of an organization that strives to push the technological envelope in delivering innovative solutions to customer problems. Sparx is a casual and highly collaborative work environment. Our relatively small team helps us utilize the best of each player on different projects. Responsibilities • Design and implement software of embedded devices and systems from requirements to production and commercial deployment, • Work directly with engineering peers from all disciplines to create new technologies for multiple industries, • Communicate and appropriately document engineering designs at all phases of the product lifecycle Requirements Unless you can prove that you are a phenomenal developer through extensive work history, a minimum of a Bachelor's degree in Engineering or similar is required. Experience in the following areas is also preferred: • Dedication to proper source control methods, • Strong problem solving and communication (verbal and written) skills, • Excellent mathematics skills, • Experience in testing and troubleshooting, • Experience interfacing with internal/external customers and vendors, • Proven working experience in software engineering, • Experience in hands-on development and troubleshooting on embedded targets, • Solid programming experience in C or C++, • Proven experience in embedded systems design with preemptive, multitasking real-time operating systems, • Familiarity with software configuration management tools, defect tracking tools, and peer review, • Excellent knowledge of OS coding techniques, IP protocols, interfaces and hardware subsystems, • Adequate knowledge of reading schematics and data sheets for components, • Strong documentation and writing skills At Sparx, we move quickly and work on a wide variety of projects. Our engineers are challenged daily and must be versatile. You may be introduced to a technology stack that you have limited familiarity in, especially those that deal with the fast-paced nature of emerging technologies from machine learning to virtual reality and various modern tools and libraries. Therefore, given the diversity of our projects, we are more concerned with your work ethic and your fit than your experience in any specific technology. You will also be dealing directly with clients, on the front line, so it is important for you to be able to recognize and apply the proper software lifecycle procedures and methodologies in order to help them meet their needs in an efficient and predictable manner. You are someone who recognizes potential pain points in the design of a system, knows how to utilize the best tool for the job, and apply the best estimates when interfacing with the stakeholders. You are not the type to sit on the sidelines waiting for someone to tell you what to do next. You are someone who will continue to develop valuable skills such as big-picture prototyping, breaking down large tasks into smaller, testable pieces, and expanding your software capabilities. We seek problem solvers, not problem finders, and we have a strong reputation to uphold. We hire slowly and we hire well. Every engineer here is someone the rest of the team trusts to own a problem end to end, so you get to focus your efforts on technical work. In this highly collaborative and engaging environment, you will have the opportunity to work with, and learn from, a talented group of individuals, being exposed to a vast array of different domains and expertise. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Training & Development, • Free Food & Snacks, • Wellness Resources

Job Description The Talent Mine is recruiting for a Designer/Detailer (Electrical/Controls) for a full-time, in-office position in Austin, Texas. You will in work in modularization R&D for our client that is singularly focused on delivering 10 to 100s of GWs of compute faster than anyone else, rethinking every layer of the stack. They acquire power, design and build data centers, and operate them - with teams spanning hardware and software. Speed and scale are their key differentiators. Come be a part of building civilization-scale infrastructure for AI. We hire people who care deeply about this problem space. If that is you, please apply! How We Operate • Full autonomy. Own things end to end, take on scope without being asked, no permission required to operate outside your core role., • We drive everything forward as fast as possible., • Challenge every assumption. Zero analogy thinking, no egos, the best idea wins., • The frontier of AI is the most interesting problem of our time. We put in long hours at high intensity to push the frontier forward., • If you're going to spend your time, spend it on something that matters to the world. The Modular Team The Modular team designs and builds factory-produced data center modules, taking gigawatt-scale infrastructure from site-built construction to repeatable manufacturing. Examples of key problems the team is working on: • Design first-of-a-kind modular data centers that a factory can build, ship, and commission on repeat., • Produce installation-level electrical and controls packages that fabricators and electricians build from without engineering support on the floor., • Standardize the design system, libraries, templates, and BOM structures, so every unit is faster to detail and build than the last., • Absorb rapid engineering changes across in-flight units without breaking configuration control. Role Scope • Produce the detailed electrical and controls models and drawings the factory builds from: panels, raceway, cable schedules, and terminations fully detailed, no gaps left to field interpretation., • Detail to installation level: conduit and cable tray runs, panel layouts, wiring diagrams, and BOM-linked parts accurate enough that the shop orders and builds straight from the package., • Turn engineering changes into updated, released packages in days, with revisions tracked cleanly so no one builds from a stale sheet., • Own the model's cleanliness: build and maintain the standards, symbol libraries, and templates that make the next unit faster to detail than the last., • Close out drawing issues at the source, fixing the template or standard that caused the question, not just the sheet. What We're Looking For The below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would. • You've detailed electrical or controls packages for fabrication or modular assemblies, in a panel shop, UL 508A builder, or industrial automation integrator., • You live in an electrical CAD platform; wiring diagrams and cable schedules are your daily output, not an occasional task., • Shops and electricians build from your drawings without calling. When they do call, you change the template or standard so that category of call never happens again., • You model to standards and maintain library discipline: you build and curate symbol libraries and templates instead of just consuming them., • You handle revision storms without version chaos; the released package is always the one being built., • You know how things get installed: bend radii, terminations, and the clearances real electricians need, and your drawings reflect it., • Bonus: AutoCAD Electrical or EPLAN, plant and BIM modeling (Revit, Plant 3D), panel and wiring diagram standards, and BIM coordination experience. We are committed to pay equity and transparency. Our client is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law. Our client will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law. The Talent Mine is a boutique recruitment firm dedicated to providing a pinpointed, hands-on, and friendly hiring experience for world-class professionals. We are unabashedly employee-centric, leveraging our team's deep technical and engineering backgrounds to ensure we match your unique "why" with the right mission-critical projects. Our long-term relationships are founded on trust, mutual respect, and a commitment to delivering win-win results for both our candidates and the world-changing companies we serve.

Job DescriptionCompany Description Renesas is seeking an experienced and strategic leader to lead the Hyperscalers and Emerging AI segment within the High-Performance AI and Compute (HPAC) product line. HPAC, part of the Performance Computing Power (PCP) division, develops high-performance digital multiphase power solutions for AI, cloud infrastructure, data centers, servers, networking, and emerging compute applications. As Director, Hyperscalers & Emerging AI, you will own the strategy, business development, and growth of this critical market segment. You will engage directly with leading cloud service providers and emerging AI companies, identify new market and technology opportunities, shape product and portfolio strategy, and orchestrate global Sales, Applications, and Product Management teams to secure design wins and drive sustainable revenue growth. This is a highly visible leadership role with the opportunity to shape Renesas’ position in some of the fastest-growing segments of the semiconductor market. Job Description Key Responsibilities Segment Strategy & Growth Own the global strategy and growth plan for the Hyperscalers and Emerging AI segment, including market priorities, target customers, design-win objectives, and revenue growth. Identify emerging technologies, applications, customers, and market segments that can expand Renesas’ addressable market and strengthen its competitive position. Develop a deep understanding of market dynamics, customer architectures, competitive activity, technology roadmaps, and design windows to anticipate opportunities and threats. Translate market insights into actionable recommendations for product, portfolio, and investment priorities. Customer & Business Development Build and maintain trusted relationships with key technical, business, and procurement stakeholders at leading cloud service providers and emerging AI customers. Lead strategic customer engagements to understand architectures, requirements, technology roadmaps, and future power-management needs. Orchestrate global Sales and FAE teams in product promotion, opportunity development, and design-win execution. Drive opportunities from early customer engagement through design win, qualification, and ultimately revenue. Clearly articulate Renesas’ differentiated value proposition to customers and ensure consistent, high-impact positioning across the organization. Product & Portfolio Leadership Partner closely with Product Managers to translate customer and market requirements into compelling product requirements and differentiated product roadmaps. Identify portfolio gaps and recommend new products, technologies, partnerships, or investments required to capture emerging opportunities. Provide competitive and market intelligence to guide product positioning, roadmap priorities, and go-to-market strategy. Ensure strong alignment between customer requirements, product strategy, and commercial priorities. Leadership and Cross-Functional Execution Align Product Management, Engineering, Applications, Sales, Marketing, and Operations around the priorities and objectives of the segment. Drive disciplined execution and accountability across global, cross-functional teams. Instill sense of urgency and ownership. Present segment strategy, market opportunities, competitive dynamics, design-win pipeline, and business outlook to senior leadership. Operate effectively across global organizations and cultures, influencing teams beyond direct reporting lines. Qualifications Requirements and Qualifications Education and Experience BS in Electrical Engineering or related field (MS or MBA a plus). 15+ years in product management, product marketing, or related roles. Hands-on experience managing and launching products in data center, server, telecom, networking, or computing markets. Understanding of power management applications and products. Track record of driving revenue growth and market adoption. Skills & Attributes Strategic thinking with strong analytical, problem-solving and decision-making skills. Communication that translates complex concepts clearly for technical and executive audiences. Excellent interpersonal skills – ability to influence across teams, geographies, and cultures. Ability to be personable and drive process changes. Experience with driving change that resulted in positive outcomes. Ability to collaborate and be effective in a fast-paced environment. Ownership mindset – high energy, self-motivated, and results-oriented. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Job Description Sales Engineer - Austin Beckhoff Automation is seeking a Sales Engineer to join our South regional team, focused on Central Texas territory. The Sales Engineer will leverage both technical expertise and commercial acumen to drive growth, build trusted customer relationships, and deliver innovative automation solutions. This is a high-impact role for an individual who thrives in a dynamic, collaborative environment and is passionate about shaping the future of industrial automation. Key Responsibilities Technical & Product Expertise • Accurately explain key product and technology concepts to position Beckhoff’s solutions and communicate value to customers., • Including but not limited to IPC’s, Motion, HMI, Vision, Robotics, Test and Measurement, AI, Machine Learning, and Data Acquisition., • Generate bills of materials (BOMs) and proposals based on customer design requirements., • Stay informed about new product releases and industry trends to proactively engage customers., • Appropriately route administrative or support tasks to ensure smooth customer experiences. Sales Growth & Strategy • Execute a strategic sales plan for the Central Texas territory to achieve revenue and growth targets., • Identify and pursue new business opportunities while expanding engagement within existing accounts., • Conduct in-person and virtual customer meetings to uncover needs, deliver tailored automation solutions, and drive deals to close., • Collaborate with the Regional Director to align account strategies and ensure consistent territory execution., • Maintain a structured and accurate sales pipeline, ensuring opportunities progress effectively through each stage of the sales process. Customer & Territory Management • Manage territory forecasting, CRM documentation, and opportunity tracking to ensure accurate reporting and planning., • Analyze sales performance metrics and develop action plans to improve territory effectiveness., • Partner with Application Engineers and other internal experts to support customer technical needs and strengthen long-term relationships., • Represent Beckhoff at trade shows, customer events, and industry conferences to build visibility and foster engagement. Disclaimer: This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. The company reserves the right to modify duties or assign additional responsibilities as necessary to meet business needs. Other duties as assigned. What Makes This Role Unique • Own Your Territory: Full-cycle sales ownership in a growth market, • Cutting-Edge Portfolio: Sell the most advanced automation technology in the world, • Collaborative Culture: Join a supportive, high-performing regional team, • Visible Impact: See the results of your work directly in customer success and territory growth What We’re Looking For – Required Skills & Qualifications • Bachelor’s degree in Engineering, Engineering Technology, or related technical field; or a Business degree with relevant automation industry experience, • Minimum of 7-10 years of experience in a sales or industry-related role preferred, • Demonstrated success in technical solution sales, preferably within industrial automation, • Strong understanding of automation hardware and software, • Excellent organizational, analytical, and communication skills, with the ability to engage effectively at all levels of a customer organization, • Proven ability to exceed sales targets and manage multiple projects in a fast-paced environment, • Must be physically located within the Austin territory Work Location This position follows a hybrid work model, requiring the Sales Engineer to be on-site at our Austin office for customer meetings, technical support, and team collaboration, while allowing flexibility to work remotely on other days. This approach ensures strong customer engagement and effective teamwork, balanced with work-life flexibility. Travel This position requires varying travel ranging from 25-35% which may include day trips, overnight stays, and occasional extended travel depending on business needs. Travel may be local, regional, or national. All travel-related expenses will be reimbursed in accordance with company policy. Candidates must be able to meet the travel requirements of the role, and reasonable accommodations will be provided as needed in accordance with the Americans with Disabilities Act (ADA). What we offer Benefits At Beckhoff Automation USA, our privately held, family-owned culture empowers candid collaboration, the freedom to create innovative solutions, and strong relationships built around cutting-edge technology and shared purpose. • Generous Paid Time Off + 12 Paid Holidays, • Employer paid High-Deductible Medical plan, Dental, and Vision for Employee + Family!, • 401(k) with up to 6% employer match, • Employer-Paid Insurance: Life, AD&D, Short-Term and Long-Term Disability, • Elective Benefits: Accident, Critical Illness, Indemnity, and Pet Insurance, • Professional Development Opportunities, • CarData Program: Fixed monthly reimbursement + Variable monthly mileage, • Additional $200.00 to $800.00 (Disclaimer: dependent on location) Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job, with or without reasonable accommodation: • Ability to stand and sit for extended periods., • Ability to use a computer screen for extended periods., • Ability to lift and carry items weighing up to 40 pounds occasionally., • Ability to bend, stoop, reach, and move as needed to perform job duties., • Manual dexterity for operating tools and equipment., • Adequate vision and hearing to perform essential tasks safely. About Beckhoff At Beckhoff, automation is our calling. We empower engineers to differentiate and succeed as industry leaders –– to harness new technologies, embrace open standards and solve the world’s most complex problems. Founded and led by engineers, we organically create advanced controls, communication, IoT, and motion technologies that become unique tools for your one-of-a-kind challenges in an age of digital transformation. As a global partner with U.S. headquarters in Minneapolis, we remain committed to sustainability, inclusivity, and support for the people behind the automation. So, whether you’re powering the EV revolution, dazzling on Broadway, launching satellites, or developing fusion energy solutions – you can reach new heights for your business, industry, and humankind. Beckhoff is an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, veteran status, or any other legally protected status. We are committed to creating an inclusive environment for all employees and applicants. If you require a reasonable accommodation to complete the application process, participate in an interview, or otherwise take part in the recruitment process, please contact our Talent & Culture Team.

Job Description Join our Team! We offer 100% employer-paid benefits and an opportunity to join a dynamic team working on cutting edge technologies! Acutronic is looking for a Quality Engineer I to support and improve the Quality Management System (QMS) while ensuring product and process compliance across manufacturing operations. This role drives quality assurances, supports continuous improvement initiatives, and partners cross-functionally with Engineering, Operations, Supply Chain and Customers to reduce defects, improve process capability, and ensure compliance with industry standards. Quality Engineer I Your Roles/Responsibilities: • Develop, implement, and maintain inspection plans for incoming, in-process, and final inspection, • Define acceptance criteria aligned with engineering drawings, specifications, and customer requirements, • Support implementation of risk-based controls (FMEA, Control Plans, APQP elements where applicable), • Ensure compliance with QMS requirements and regulatory/customer standards, • Lead and/or support root cause analysis using structured methodologies (8D, 5 Whys, Fishbone, etc.), • Manage and drive closure of Nonconformances, RMAs, and Corrective Actions, • Support containment, corrective, and preventive actions to prevent recurrence, • Support supplier quality activities, including supplier qualification and performance monitoring, managing supplier corrective actions (SCARs), and resolving incoming quality issues., • Develop and maintain procedures, work instructions, and quality documentation, • Ensure proper documentation control and record retention, • Partner with Engineering and Operations to ensure design for quality and manufacturability, • Provide training and guidance on quality processes and requirements, • Support calibration and measurement system management Your Profile/Qualifications/Skills: • Bachelor of Science in Electrical or Industrial/Process Engineering, Manufacturing Management, or related field from an accredited college or university, preferred, • At least one years of related aerospace, defense, or engineering industry experience, required, • Additional training or specializations in quality assurance, management and analytics, preferred, • Training and experience with IPC standards for Electronic manufacturing and assembly, preferred, • Experience with Government Contract flow downs including DFARS, FARS, and DPAS, preferred. A combination of education and experience will be considered, • Experienced in project management as well as documentation practices, preferred, • Experience with ISO 9001 and AS91000, preferred We Offer: • Employer-paid medical, dental, and vision insurance, • 401k match, • Company-paid holidays and Paid-Leave Time, • 4/10 schedule About Acutronic: The Acutronic Group has a proud history of building technologies and teams that are crucial to the aerospace, defense, and transportation industries. Acutronic’s Simulation & Test Division is the global market leader in high-performance motion simulation and test equipment. Our rate tables and advanced centrifuges are used to test or calibrate inertial sensors, navigation systems, and stabilized electro-optics. Hardware-In-the-Loop motion simulators replicate the flight motion profiles and engagement scenarios of missiles. Geotechnical centrifuges and their related accessories are designed to study the behavior of structures, soil mechanics, and earthquakes. Our vibration test systems (shaker tables) allow users to carry out environmental tests to ensure the robustness or quality of manufactured products. The Division also develops and refurbishes stabilized or gimbaled-platforms utilized in applications such as tracking mounts, gun turrets, and directed-energy systems. Acutronic’s Aerospace Components Division manufactures specialty components for use on uncrewed aerial vehicles, land defense applications, and missile systems. These products are used on next-generation aerospace programs and include a range of electric power systems, servo-actuators, micro-turbines, and Hybrid-Electric-Propulsion-Systems. We offer standard products and excel at designing highly customized solutions for demanding mission requirements. The Acutronic Group employs approximately 300 employees across sites in Austin, Texas; Pittsburgh, Pennsylvania; Switzerland; Germany; France; and India. Acutronic Integrated Systems Inc. 3401 Ed Bluestein Blvd, Austin, TX 78721 acutronic.com +1 737 212 9013 Acutronic is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you have a disability or special need that requires accommodation, please contact us at HR@acutronic.com or phone 412.926.1200. Powered by JazzHR cq0SkrQ5Mq

Job Description CIVIL ENGINEER / Land Development -OFFICE CIVIL ENGINEER / Project Desinger We are seeking an experienced Civil Engineer with an E.I.T (preferred) and 2 to 4 years of experience in planning and design. The primary responsibilities for this position will include providing duties associated with Civil Site plan & subdivision design. Responsible for the development of all phases of infrastructure and land development projects throughout the project life cycle. This includes planning, subdivision, preliminary engineering, final engineering and construction support. Position requires contact with the City, County, & State for submittals and follow up for the civil design. Duties: · Research appropriate city, county, and state jurisdiction ordinances for required supporting project documentation. · Work closely with other Engineers and staff on submittals, review, and design. · Design Civil plans, using AutoCAD for design. · Responsible for drafting reports, communicating, and corresponding via email/phone for meetings with appropriate jurisdictions. · Other duties as needed. About You: You are looking for a firm that is complex with extensive projects, but also small enough to provide the proper training needed. You are ready for exposure to a variety of work, connect and contribute. As a knowledgeable professional, you are committed to excellence, and as a person you value respect, communication, and integrity. Requirements: · Bachelor’s Degree in Civil Engineering · Engineer In Training (preferred) · 2-4 years of strong experience in engineering design and plan production · Proficient in AutoCAD design · Knowledge of Drainage Analysis Software · Ability to work independently and as a team. · Excellent written and verbal communication skills, to interact with clients, regulators and state officials on a daily basis. · Able to use resources effectively to provide excellent client services. · Working knowledge of land development, drainage, detention, water quality and wastewater utility design. · Proficient in Microsoft Office and Adobe Pro About Us: PSCE we are a small but growing Civil Engineering Consulting Firm that prides on respectively serving our clients in the community. We provide services around Austin, Texas and extended areas. We believe in a work environment that promotes teamwork, high quality, collaborative thoughts and solutions. Our professionals are dedicated to our client’s vision and creating real partnerships. Benefits: · Competitive salary · Medical, Dental, Vision · Holidays · PTO Pay will be commensurate with experience. \nCompany Description Professional StruCIVIL Engineers, Inc. (PSCE) is a Texas-based civil engineering consulting firm specializing in land development, infrastructure design, and municipal permitting. We provide comprehensive engineering services for commercial, residential, industrial, and public-sector projects throughout Texas. Professional StruCIVIL Engineers, Inc. (PSCE) is a Texas-based civil engineering consulting firm specializing in land development, infrastructure design, and municipal permitting. We provide comprehensive engineering services for commercial, residential, industrial, and public-sector projects throughout Texas.

Job Description Electroninks is quickly expanding and is seeking a full-time Mechanical Engineer, Precision Automation to joining the CircuitJet Team. You should be able to design a machine gantry, spec the sheet metal enclosure, pick the right motor, wire it up, and know when a problem calls for a clever mechanism versus an electrical solution. You’ll work hand‑in‑hand with experienced electrical engineers the whole way. The work is significantly mechanical engineering, but not exclusively: you’ll think across domains because that’s what building a real machine requires. You’ll own the structural and motion architecture of a complex, multi‑process machine: precision gantries, sheet metal enclosures, CNC‑machined stages, tool changers, fixturing, and board handling, all to micron‑level accuracy and production‑ready reliability. Beyond the mechanical design, you’ll build reliable processes across pick‑and‑place, laser ablation, inkjet printing, solder paste dispensing, alignment, and calibration. And as we move from hand‑built prototypes toward contract‑manufactured production, you’ll help scale the machine itself. You’ll work on a very small team of industry experts who live, eat, and breathe PCBA production. People obsessed with crafting the perfect machine, the perfect process, and the opportunities they unleash. If you’ve built your own 3D printer or robots, get excited about manufacturing machines, and love the idea of a single platform that does the full PCBA stack locally (bare substrate to finished, assembled board), this is your role. Duties and Responsibilities: • Design and detail the machine. Architect multi‑axis gantry systems, structural frames, sheet metal enclosures, and CNC‑machined stages. Select linear guides, ball screws, motors, bearings, and drives to hit accuracy, stiffness, and throughput targets. Design toolhead mounts, board handling, fixturing, and transfer mechanisms., • Integrate across domains. Spec and wire motors, encoders, sensors, drivers, and cabling into mechanical assemblies, working hand‑in‑hand with experienced EEs. Know when to solve a problem with a mechanism and when to reach for a sensor and a cable., • Own the processes. Develop reliable, repeatable processes for pick‑and‑place, laser ablation, conductive inkjet printing, solder paste dispensing, board handling, alignment, and calibration. Characterize process windows and iterate until each station performs to spec., • Build, test, iterate. Assemble prototype gantries and subsystems hands‑on. Debug, align, and test for repeatability. Work with materials scientists to translate ink and paste properties into machine parameters that produce consistent results., • Scale it. Help take production from a handful of hand‑built units to working with contract manufacturers for volume. Design for manufacturability, serviceability, and cost‑reduction., • Document everything. Produce detailed CAD assemblies, drawings, BOMs, tolerance stacks, and interface documentation. Qualifications: Required • BS or MS in Mechanical Engineering, Mechatronics, Robotics, or equivalent practical experience., • 3+ years building robots, machines, or mechatronics systems professionally., • Strong experience designing precision motion systems, gantries, CNC machines, robotics, or automation equipment., • Hands‑on machine building, whether professionally (CNC routers, pick‑and‑place, production equipment) or through personal projects (custom 3D printers, robots, laser cutters)., • Deep CAD proficiency is non‑negotiable., • Solid mechanics fundamentals: stiffness, tolerances, bearings, drivetrains, vibration, thermal effects. Comfortable with fabrication (3D printing, machining, laser cutting, sheet metal)., • Hands‑on electrical integration (wiring motors, sensors, drives) working alongside experienced EEs. Preferred • Experience with high‑precision linear stages, micron‑scale positioning, servo systems, or closed‑loop motion., • Familiarity with machine vision‑driven alignment and mechanical design to support optical calibration., • Background in industrial automation, semiconductor tools, PCB equipment, or lab instrumentation., • Experience designing for DFM and low‑volume production scaling to contract manufacturing., • Excited about using AI in your engineering workflow to speed up calculations, select components, and get design critiques, while maintaining your own judgment. You use AI to move faster, not to think for you. When colleagues ask your opinion, you have real thoughts, not a regurgitated ChatGPT answer., • Personal projects that show genuine passion for machines (a custom 3D printer, a robot, a home CNC) speak louder than credentials. Benefits • Health, Dental, and Vision Insurance – provided by Employer, • Short-term Disability, Long-term Disability – provided by Employer, • Life Insurance – provided by Employer, • 401(K) Plan with 2% match, • Paid Time Off (PTO), • Paid Holidays About Electroninks: Electroninks Incorporated is the market-leader in the production and scaled manufacturing of metal-complex conductive inks. We have developed a full suite of proprietary conductive ink solutions, world-class manufacturing partners, and complimentary equipment ecosystems, thus accelerating time to market for new products and additive manufacturing breakthroughs. Electroninks’ metal complex inks – including silver, gold, platinum, nickel and copper –deliver higher conductivity, flexibility and cost-effectiveness. We are the only domestic U.S. supplier of this full suite line of particle-free inks. The company’s conductive inks have been adopted by customers requiring highly reliable solutions for applications in semiconductor packaging, printed circuit board (PCB) manufacturing, consumer electronics, wearables, medical devices and more. We also partner closely with best-in-class equipment and integration partners to provide customers a total ink and process solution with the ultimate goal to reduce the manufacturing costs and complexity. Our goal is to successfully implement our conductive inks into our customers products and close the gap of commercialization. We have a world-class talented and professional team, with expertise in electronics, semiconductor, advanced materials, chemistry, and ink production. We are backed by strong strategic partners and some of the most prominent global technology investors. We are headquartered and located in Austin, Texas.

Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Manager, Electrical Engineering is responsible for the electrical systems of the KARNO generator, including high-voltage power electronics, battery systems, low- and high-voltage architecture, wiring harnesses, and the hardware that converts linear motion into electrical output. This is a working manager role: the position leads and develops a team of electrical engineers while remaining directly involved in technical execution, including circuit architecture, schematic review, and hardware bring-up in the lab. The Manager is accountable for the technical excellence, safety, and reliability of the electrical engineering function, and for establishing the design standards and review practices the team works to. The position plans team capacity, owns hiring and development for the electrical engineering staff, and partners with mechanical, controls, supply chain, and program management on system integration. KARNO systems are deployed in data center, military, and industrial applications. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities • Own critical electrical designs personally, including regular time at the bench and in the test cell, while leading the team as a practicing engineer., • Lead the electrical engineering team in the design and development of KARNO generator electrical systems, including high-voltage power electronics, battery systems, linear generator power stages, and low-voltage controls hardware, ensuring effective integration with mechanical, electromechanical, and control elements., • Architect and oversee the design and execution of electrical hardware, control modules, and system-level solutions, ensuring a cohesive and integrated development approach., • Integrate electrical and control modules into final products and collaborate with suppliers to ensure compliance with quality, performance, and safety requirements., • Define electrical design requirements and technical best practices, ensuring both electrical and control components align with industry standards for hybrid power generation., • Translate system requirements into electrical system- and sub-system specifications, supporting seamless integration across industrial and commercial applications., • Lead, coach, and develop the electrical engineering team, fostering a collaborative, innovative, and high-performing work environment., • Own hiring, onboarding, performance management, and career development for electrical engineers, including setting individual goals and conducting regular performance reviews., • Plan team capacity and assign engineering work across programs, balancing workload, skill development, and technical priorities., • Establish and maintain electrical engineering standards, design review practices, and documentation processes across the team., • Ensure compliance with applicable safety and regulatory standards for electrical systems used in hybrid generator products., • Serve as the electrical engineering point of contact for program management and cross-functional teams, including mechanical, controls, and supply chain, providing technical input, effort estimates, and engineering deliverables., • Lead technical issue resolution at the hardware and component level, working hands-on in the lab, organizing troubleshooting efforts, conducting root cause analysis, and implementing corrective actions to improve system reliability., • Achieve system cost targets through design optimization, module consolidation, and strategic supplier selection for production components., • Provide technical direction to electrical component suppliers in support of design, prototyping, and testing, in partnership with supply chain., • Lead the development of quality and validation documentation, including FMEAs and DVP&Rs, to ensure system reliability and safety., • Personally develop and review schematics and release drawings for low- and high-voltage wiring harnesses and associated electrical systems., • Provide strategic direction for electrical design decisions, ensuring electrical components meet performance, cost, and regulatory requirements for industrial and commercial use., • Additional duties and responsibilities as assigned, needed, or required for the business. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Qualifications include: • Education, Experience and Certifications, • Bachelor's degree in Electrical Engineering., • 10+ years of hands-on electrical engineering experience, including 3+ years leading or managing engineers while remaining technically active., • Track record of delivering electrical hardware, including power electronics, high-voltage systems, or electromechanical products, from concept through production., • Skills and Abilities, • Hands-on electrical engineering capability, including circuit design, hardware build and test, and bench-level debugging, combined with the ability to lead and develop a team., • High-voltage power electronics design, including AC/DC and DC/DC converters and battery systems., • Low- and high-voltage wiring harness design., • Electrical hardware architecture and circuit design for electromechanical systems., • Knowledge of and compliance with applicable electrical and safety standards., • Experience with real-time control systems, including PLCs and microcontrollers., • Systems engineering and structured product development processes., • Electrical hardware design, optimization, and cost reduction., • Prototyping, testing, and validation using tools such as FMEA and DVP&R., • Technical engagement with suppliers of electrical components., • Definition of high-level design requirements and internal engineering standards., • Hiring, performance management, and career development of engineering staff., • Ability to balance cost, performance, and regulatory requirements., • Familiarity with relevant electrical safety standards, including IEC and UL., • Ability to translate customer and system requirements into clear product specifications., • Quality assurance and control for electrical and control systems., • Promotion of creative problem-solving within multidisciplinary teams., • Clear communication of technical concepts to both technical and non-technical stakeholders., • Effective cross-functional collaboration across engineering disciplines., • Strong analytical skills for diagnosing and resolving complex technical issues., • Leadership in root cause analysis and implementation of corrective actions., • Mentoring and coaching of electrical engineers., • Building and leading high-performing engineering teams., • Bias for action and comfort with the pace and ambiguity of bringing a first-of-its-kind product to market. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in a production/assembly/engineering lab environment. Physical/Other Requirements • Ability to lift and/or move up to 30 pounds., • Ability to travel, as needed, by plane, automobile, etc. Direct Reports This position has or may have direct reports. Benefits: • Medical Plans, with PPO or HDHP options, • Dental Plans, with buy-up option, • Vision Plan, • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options, • Short Term Disability, paid for by the company, • Long Term Disability, paid for by the company, • Flexible Spending Accounts (FSA), • Health Savings Account (HSA), • 401k/Roth 401k, • Voluntary Accident Plans, • Voluntary Critical Illness Plans, • Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at HR@hyliion.com.

Job Description Estimator Location: Austin, Tx Reports To: Sales Engineer - Controls, 5K Automation and Controls Employment Type: Full-Time 5K Automation and Controls is a newly established building automation and energy management company affiliated with Hays Electrical Services — a nationally recognized electrical contractor with over 19 years of experience delivering safe, high-quality electrical solutions across commercial, industrial, and specialty markets. Built on the same foundation of safety, excellence, drive, communication, and client focus that defines Hays, and 5K Automation and Controls was created to meet the growing demand for intelligent, scalable BAS/EMS solutions across enterprise and multi-site portfolios nationwide. Our mission is simple: to make ourselves indispensable to our clients by delivering technically sound, commercially smart building automation solutions that perform. Position Summary The Estimator supports 5K Automation and Controls construction-channel growth by developing accurate, detailed cost estimates for GC bid opportunities. This role performs quantity takeoffs from mechanical, electrical, and controls drawings, builds labor hour and material cost estimates, and maintains the estimating templates and pricing data that keep 5K's bids competitive and profitable. The Estimator works under the direction of the Sales Engineer — Controls, providing dedicated estimating capacity as Track 1 GC bid volume grows beyond what the Sales Engineer can support alone. This is an individual contributor role well suited to someone who is precise, deadline-driven, and comfortable translating construction drawings into accurate cost and labor projections. Key Responsibilities ● Perform detailed quantity takeoffs from mechanical, electrical, and controls drawings for GC bid opportunities across Track 1 construction-channel projects ● Develop labor hour estimates for controls installation, programming, startup, commissioning support, and documentation using 5K's approved estimating templates ● Build material cost estimates by researching and applying current manufacturer pricing for DDC controllers, field devices, network components, and software licenses ● Support the Sales Engineer in assembling GC bid packages, including equipment schedule inputs, cost summaries, and exclusion/clarification lists ● Maintain and update the estimating templates and pricing database with current labor rates, material costs, and productivity factors ● Compare completed bid estimates against actual project costs to refine estimating accuracy and identify recurring variances ● Coordinate with manufacturer partners to obtain current pricing, lead times, and product availability for bid-critical equipment ● Log and track all estimating activity in the CRM/bid log, including bid due dates and estimate status ● Flag scope ambiguities, drawing conflicts, or missing information to the Sales Engineer before finalizing an estimate ● Review subcontractor and vendor quotes for accuracy and completeness as part of bid package assembly Qualifications & Skills Required ● 2–5 years of experience in construction estimating, ideally in BAS/EMS, HVAC controls, low-voltage, or mechanical/electrical construction ● Proficiency with quantity takeoff and estimating software (e.g., On-Screen Takeoff, PlanSwift, Bluebeam, or equivalent) and estimating spreadsheets ● Ability to read and interpret mechanical, electrical, and controls drawings and specifications ● Strong attention to detail and accuracy while working under bid deadline pressure ● Proficiency in Microsoft Excel; experience with CRM or project management tools ● Bachelor's degree in construction management, engineering, or a related field, or equivalent experience Preferred ● Working knowledge of BACnet, Niagara/Tridium, or comparable open-protocol BAS platforms ● Experience estimating for GC-channel construction bids ● Familiarity with Distech Controls, Delta Controls, or other BAS manufacturer platforms ● Exposure to data center, CRE, healthcare, or industrial vertical construction estimating Why Join 5K Automation and Controls? At 5K Automation and Controls, you're joining a ground-floor opportunity with the backing of an established, financially strong parent organization. You'll have the resources to do your best work, a team invested in your success, and a culture built on accountability, collaboration, and excellence. If you're ready to grow with a company that is redefining what a controls company can be — we want to hear from you. Powered by JazzHR IZuYYE1Gsp

Job Description Exowatt is revolutionizing the energy landscape for the AI era with our groundbreaking P3 system that captures solar energy, stores it as heat, and generates electricity on demand. Founded in 2023 and backed by leading investors including Andreessen Horowitz, Sam Altman, and Felicis, we're committed to providing clean, modular, and scalable power that meets the rapidly growing demands of AI infrastructure. Our mission is to make sustainable renewable energy always available and almost free, enabling technological advancement while protecting our planet. We're hiring a Quality Engineer to own the quality of our supply chain and manufacturing operations. You'll qualify suppliers, drive root-cause investigations, and build the quality systems that let us scale from pilot builds to volume production. This is a hands-on, high-impact role for someone equally at home on a factory floor, at a supplier site, and deep in inspection and yield data. This role is based in our Austin, TX facility. Relocation is required, and relocation assistance will be provided if necessary. What You'll Do Own incoming inspection, in-process, and final quality for assigned commodities, sub-assemblies, and finished product Partner with the supply chain team to qualify new suppliers — on-site audits, first-article inspections (FAI), PPAP-style submissions, and process capability reviews Develop inspection plans, control plans, and acceptance criteria for purchased parts and in-house manufactured components Lead root-cause investigations (8D, 5-Why, Ishikawa) on supplier defects and internal manufacturing non-conformances; drive corrective and preventive actions (CAPA) to closure Manage the non-conformance (NCR) and supplier corrective action request (SCAR) processes end-to-end Partner with design engineering on DFM/DFA reviews and help translate design intent into manufacturable, inspectable specifications (GD&T, critical-to-quality features) Track and report quality metrics — PPM, first-pass yield, cost of poor quality, supplier scorecards — and use them to drive improvement Support new product introduction (NPI) from prototype through production ramp, including process validation and pilot builds Build and maintain quality documentation: inspection procedures, work instructions, quality records, and calibration programs Help stand up and evolve Exowatt's quality management system (QMS) — we're early enough that you'll shape it, not just operate inside it Partner closely with the Reliability Engineering team to feed manufacturing and supplier quality data into failure analysis and design improvements Required Qualifications Bachelor's degree in Mechanical, Manufacturing, Industrial, Aerospace, or a related engineering field 5+ years of quality engineering experience in a hardware manufacturing environment Hands-on experience with supplier quality — audits, FAI, PPAP, SCARs, and supplier development Working knowledge of root-cause methodologies (8D, 5-Why, fishbone) and statistical tools (SPC, Cpk, MSA, DOE basics) Fluency with GD&T and the ability to read and interpret mechanical drawings Experience with metrology and inspection tools (CMM, calipers, micrometers, optical comparators, etc.) Deep experience with ISO 9001 and the fundamentals of building or operating a QMS Clear technical writing and the ability to communicate findings to suppliers, engineers, and leadership Willingness to travel to supplier facilities domestically and occasionally internationally Preferred Qualifications Experience in energy, aerospace, automotive, industrial equipment, or other regulated/high-reliability hardware industries Exposure to welded or brazed assemblies, pressure vessels, high-temperature materials, thermal storage systems, or rotating machinery relevant to the P3 system ASQ certification (CQE, CQA, or CSSBB) Deep Experience standing up a QMS at an early-stage company, or taking one from ISO 9001 toward AS9100, ISO 14001, or similar Six Sigma Green or Black Belt Experience with ERP/MES/QMS platforms (NetSuite, Arena, Propel, or similar) Experience building a quality function from scratch at an early-stage hardware company What We Offer: Competitive salary and equity options. Comprehensive benefits package, including health, dental, and retirement plans. A dynamic work environment that fosters creativity and innovation. Opportunities for professional growth and development in a rapidly evolving industry. Relocation assistance. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About HydroGraph HydroGraph is a hyper-growth advanced materials company scaling pristine, high-performance graphene via its patented Hyperion detonation technology. With more than 70 active commercial projects, a growing global footprint, and industry-leading material quality (99.8% pure graphene), HydroGraph is building the next generation of engineered materials for coatings, composites, and energy storage. Role Overview We are seeking an entry-level Process Engineer to join our Advanced Manufacturing team. This role supports the connection between material properties, process behavior, and testing requirements, working under the guidance of senior engineers to help new products and process changes get ready for production. This is a strong fit for someone early in their process engineering career who is eager to learn new product introduction (NPI) practices, statistical process control (SPC), and equipment process parameters, while contributing hands-on to documentation, testing, and cross-functional collaboration with R&D, Manufacturing, and Quality. Key Responsibilities • Support the development of standards, processes, test plans, and documentation required to ensure new product introductions are seamlessly handed off to production, balancing the needs of stakeholders., • Help identify critical process parameters and operating limits required to ensure the process and product consistently meet requirements; gather and analyze data to support these decisions., • Support change control requests by developing or analyzing data used to inform change control implementation decisions., • Support the technical completeness and readiness of FMEAs, DFMs, and RCFAs., • Support the training and production readiness of new product launches, including helping train production technicians and operators, to support successful product transfers into production., • Participate in the design and development of new products, processes, and equipment design/selection., • Document process changes, work instructions, and standard operating procedures., • Run basic Design of Experiments (DOE) and perform data analysis under the guidance of senior process engineers., • Understand and apply the principles of engineering, and statistical analysis to ensure process robustness and control., • Perform testing on lab equipment to generate process data for new and existing materials., • Support Mechanical Engineering on equipment-related tasks when appropriate., • Provide hands-on support and ideas that advance the goals of Advance Manufacturing as well as the broader organization. Qualifications Required • 3+ years of experience in process engineering, or directly relevant technical/lab experience, • Willingness to learn new product introduction (NPI) practices, SPC, and equipment process parameters, • Strong analytical skills and attention to detail, • Ability to work cross-functionally with R&D, Manufacturing, and Quality teams, • Team-oriented approach with a strong willingness to learn and take initiative Preferred • Bachelor's degree in Engineering, Material Science, or Chemistry, • Background in chemical processing, material development, or a related industry, • Previous experience in New Product Introduction (NPI) is a significant plus, • Knowledge of SPC, DOE, Lean Manufacturing, Yellow/Green/Black Belt certification, and/or experience with Visio Key Competencies • Team player with a strong willingness to learn and do, • Accountability and ownership mindset, • Stakeholder management and relationship building, • Conflict resolution and negotiation, • Adaptability and flexibility in dynamic environments, • Decision-making under uncertainty, • Attention to detail and quality focus, • Customer service orientation, • Emotional intelligence and active listening, • Critical thinking and creative problem-solving Work Environment This role operates in an active chemical/process manufacturing environment and requires regular presence on the plant floor. The engineer will be exposed to industrial equipment, chemical agents, and process systems, and must adhere to all applicable safety protocols at all times. • Environment: Indoor and outdoor process/chemical plant settings; exposure to heat, noise, fumes, and moving machinery is expected. Must be able to occasionally work outdoors in varying weather conditions to operate valves and manage chemical feedstock supply lines, following all chemical handling and site safety protocols., • Physical Requirements: Must be able to stand and walk for extended periods throughout the shift. Frequent lifting and carrying of equipment, tools, or materials up to 20 lbs; occasional lifting up to 50 lbs with assistance., • Working at Heights: Must be able to occasionally work at elevations up to 15 ft when troubleshooting and maintaining process equipment, utilizing ladders, platforms, scissor lift or elevated walkways in accordance with site safety requirements., • Personal Protective Equipment (PPE): Use of PPE is mandatory in designated areas, including but not limited to safety glasses, hard hat, steel-toed boots, hearing protection, respiratory protection (breathing mask/respirator) when working in areas with chemical exposure or poor ventilation, and fall protection equipment (full-body harness and lanyard) when working at elevated heights., • Schedule: Standard business hours, Monday through Friday. Occasional weekend or off-hours work may be required to support planned maintenance, shutdowns, startups, or urgent production challenges., • Travel: May require occasional travel to other production facilities, client locations, or vendor facilities. Why Join HydroGraph • Lead the core scientific engine of one of the fastest-growing graphene companies in the world., • Shape a next-generation materials platform used across aerospace, energy, infrastructure, consumer goods, and defense., • Work directly with global partners and world-class advisors (GEIC, OEMs, DoD)., • Competitive compensation, and career advancement as the company scales.

Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Senior Manager, Manufacturing Engineering owns the manufacturing engineering function across Hyliion's Cedar Park, TX headquarters and primary production site and its Milford, OH R&D operations. The role is the bridge between the engineering design of the KARNO Power Module and the scalable, repeatable production system required for commercial ramp, defining and driving the processes, tooling, documentation, and infrastructure that transform KARNO from a highly engineered prototype into a manufacturable product. This is a player-coach role: the incumbent builds and leads a team of manufacturing engineers while remaining personally hands-on in the most challenging production problems. AI at Hyliion At Hyliion, AI is core to how we work. We equip every team member with leading AI tools and count on you to use them — to move faster, solve harder problems, and help us realize the full potential of KARNO technology for the world. Duties and Responsibilities • Productionization: translate engineering designs into manufacturable, repeatable, and scalable production configurations across both sites, aligned to the commercial ramp roadmap., • Tooling and process development: design, develop, and qualify manufacturing tooling, fixtures, and processes that support quality, efficiency, and volume scalability., • Manufacturing documentation: own PFMEAs, control plans, work instructions, SOPs, and MBOMs, keeping them accurate, current, and accessible to the production floor., • Lean and material flow: define and implement standard work, material flow, and handling strategies that increase throughput, reduce waste, and prepare the factory for increasing volume., • Process validation and control: drive capability studies, establish measurement systems and process controls, and hold consistent product quality from first article through production., • Design for manufacturability: partner with Design Engineering to embed DFM into the product lifecycle as an ongoing discipline rather than a late-stage review., • Team building: build, mentor, and lead a team of manufacturing engineers, developing the bench, the skills matrix, and the accountability that goes with them., • Cross-functional execution: drive production-readiness milestones with Product Engineering, Operations, Supply Chain, Quality, and external partners., • Manufacturing equipment capital program: own the program end to end, including needs identification, business case and justification, vendor selection, procurement support, installation, and IQ/OQ/PQ qualification, against the commercial scaling roadmap and an annual capital budget., • Root cause and CAPA: partner with Operations and Quality on rigorous root cause analysis for nonconformances and own corrective and preventive action to closure where accountable., • Continuous improvement: manage the continuous improvement intake process and build a culture of operational excellence, safety, and disciplined engineering practice., • Additional duties and responsibilities as assigned, needed, or required for the business. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Qualifications include: • Education, Experience and Certifications, • B.S. or higher in Mechanical, Manufacturing, or Industrial Engineering, or equivalent experience., • 10+ years of core manufacturing engineering experience with demonstrated progression of scope and responsibility., • 3+ years of direct people management leading a team of engineers in a manufacturing or production environment., • Demonstrated track record productionizing engineering designs, turning prototype-stage products into manufacturable, scalable systems., • Preferred: AS9100, ISO 9001, or equivalent QMS experience; background in power generation, electromechanical systems, or precision energy equipment manufacturing; additive manufacturing / laser sintering environments; and government or defense manufacturing contract support., • Skills and Abilities, • Proven expertise in process engineering: process design, validation, capability studies, and statistical process control., • Deep hands-on experience developing PFMEAs, control plans, work instructions, and SOPs from scratch., • Strong proficiency in MBOM development and management, with working knowledge of CAD/PLM environments; NX (Siemens), Teamcenter, or equivalent preferred., • Experience designing and qualifying production tooling and fixtures for complex electromechanical assemblies., • Solid grounding in lean manufacturing: value stream mapping, 5S, standard work, Kaizen, and waste reduction., • Experience with material flow design and handling systems in a production environment., • Track record owning capital equipment decisions, including business case, vendor selection and qualification, and delivering installed, validated equipment on budget., • Comfort operating as a player-coach, personally solving hard technical problems while leading and developing a team., • Effective in a startup or scaling environment where processes are built from the ground up, with a high tolerance for ambiguity., • Willingness and ability to travel approximately one week per month to Milford, OH. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in a production/assembly/engineering lab environment. Physical/Other Requirements • Ability to stand and walk for extended periods in a manufacturing, additive production, and test environment., • Ability to access equipment in confined or elevated positions., • Ability to lift and/or move up to 40 pounds, with or without reasonable accommodation., • Compliance with all site PPE and safety requirements is mandatory., • Ability to travel, as needed, by plane, automobile, etc.; approximately one week per month to the Milford, OH site. Direct Reports This position has or will have direct reports. We are not accepting candidates who require sponsorship at this time. Benefits: • Medical Plans, with PPO or HDHP options, • Dental Plans, with buy-up option, • Vision Plan, • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options, • Short Term Disability, paid for by the company, • Long Term Disability, paid for by the company, • Flexible Spending Accounts (FSA), • Health Savings Account (HSA), • 401k/Roth 401k, • Voluntary Accident Plans, • Voluntary Critical Illness Plans, • Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at HR@hyliion.com.