Lean jobs in Buffalo, New YorkCreate job alerts

Job DescriptionDescription: • Responsible for work being performed based on business and departmental needs, • Facilitates LTL, FTL, and small parcel shipments to our customers, • Arranges shipments to and from customers, vendors, and intercompany, • Enters material information into the Inventory System (ERP), • Ensures First In, First Out (FIFO) methodology is observed, • Performs monthly inventory counts and regular cycle counts, • Consults with department manager, press hall supervisor and Quality Assurance on defective raw material and FGI, • Maintains professional internal and external communications via phone, email, and in-person, • Assist in investigating root cause analysis & corrective actions for departmental needs, • Relocate excess raw material, FGI, WIP, and equipment for safe storage, • Responsible for complete & accurate information when signing for and receiving shipments, • Informs purchasing of any discrepancies before receiving into system, • Maintain a neat organized and safe warehouse environment for all employees, • Ensures material is staged and accessible for 2nd & 3rd shifts, • Understands and supports all policies, procedures, instructions, rules, and regulations (including safety) associated with the Warehouse Department., • Must follow GMP guidelines as needed, • Carries out all Company safe operating, sanitation, and housekeeping rules & policies, • Must see that equipment, working area, and accessory equipment are kept clean & in good working order, • All duties assigned to maximize efficiency of warehouse, • Identify and help implement process improvements and increased efficiency opportunities, • Assists with tooling management, • Performs other duties as assigned by managerRequirements:, • Must be able to use a pallet jack, forklift, reach truck, and straight box truck (non-CDL), • Must be able to pull/push pallets up to 2,000 lbs., • Proficient in Microsoft Office Suite (Outlook, Excel, Word, Teams, and PowerPoint), • Must be able to follow & comprehend oral, written, and/or visual instructions, • Capable of analyzing and exercising judgment in solving operational problems, • Mastery of a variety of Lean & Continuous Improvement initiatives would be a plus.

Job DescriptionJob Title: Maintenance Technician – Night ShiftLocation: Buffalo, NYHire Type: Direct HirePay Range: $36.00 – $42.00 per hour + shift differential ($2–$5/hr)Work Model: Onsite (Rotating 12-hour night shifts: Sun–Tues and every other Wed, 6:00pm–6:30am)Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewWe are seeking a skilled Maintenance Technician to support a high-growth manufacturing facility. This role is responsible for performing scheduled and unscheduled maintenance, troubleshooting, and continuous improvement activities on a wide range of industrial equipment and systems. The technician will work independently as the sole mechanic on shift, collaborating with plant teams to minimize downtime, maximize reliability, and uphold safety standards.This position requires strong electromechanical troubleshooting skills, the ability to thrive on a rotating night shift schedule, and a proactive, problem-solving mindset.Role & Responsibility:Tasks That Will Lead To Your Success • Perform scheduled and unscheduled maintenance on electrical, mechanical, hydraulic, pneumatic, and facility systems., • Troubleshoot and repair PLC- and VFD-controlled equipment, AC/DC motors and drives, industrial HVAC systems, and piping infrastructure., • Execute preventive maintenance tasks and equipment upgrades to ensure uptime and reliability., • Partner with other teams to conduct root cause analysis and drive continuous improvement., • Document all maintenance activities in the CMMS (Computerized Maintenance Management System)., • Support facility upgrades, process improvements, and expansion projects., • Maintain compliance with OSHA and safety standards., • Participate in daily shift handoff meetings and communicate effectively across teams. Skills & ExperienceQualifications That Will Help You Thrive, • 2+ years of hands-on maintenance experience in a manufacturing or industrial environment (5+ preferred)., • Strong electromechanical troubleshooting skills, including PLCs, VFDs, motors, drives, and HVAC., • Experience interpreting schematics, blueprints, and SOPs., • Forklift operation experience (certification a plus; training provided if needed)., • Ability to lift 50+ lbs. and work on your feet throughout 12-hour shifts., • Adaptability to seasonal warehouse/plant temperatures., • High School Diploma or GED required., • Valid driver’s license required., • Technical certification in Electro-Mechanical, Industrial Maintenance, Automation, or Electrical Systems preferred., • Experience in insulation, pulp & paper, or building materials industries a plus., • Familiarity with Lean Manufacturing or Six Sigma tools preferred.Compensation & Benefits, • Competitive pay: $36.00 – $42.00/hour + shift differential ($2–$5/hr)., • Benefits package available (details provided during process)., • Opportunities for professional development, certifications, and cross-training., • Annual reviews with potential compensation increases., • Advancement opportunities as the facility grows.

Job Description Objective: Provide leadership and engineering support to manufacturing operations. Design tools; develop and validate processes; develop and manage product and process cost; provide technical support to sales and the outside customer; identify and manage the introduction of new technology; maintain, troubleshoot and improve existing processes; support safety, quality, delivery and cost of the entire operation. Manage the more complex technical projects from inception through completion. Mentor less experienced engineers. Minimum Requirements: • 10+ years of experience in a related technical position in a design or manufacturing environment, • Bachelor of Science in Mechanical Engineering, Industrial Engineering, or other related field, • Solid modeling experience using Solid Works, Pro E, Inventor, or equivalent, • Demonstrated experience managing all phases of more complex technical projects, • Demonstrated safety, quality, delivery and cost experience supporting manufacturing operations Job Requirements: • Strong math, reasoning and problem solving skills, • Hands on experience with solid modeling for tool and fixture design, • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T), • Experience with MS Word, Excel, Outlook, PowerPoint, • Maintaining a presence at both the Buffalo, NY and Erie, PA sites, as required, by the work they are assigned, • Product cost development in support of the quoting process, • Routing development and maintenance in MRP, • Development of detailed work instructions, • Product cost development and maintenance through time studies (labor), BOM content (material) and overhead rates, • Continuous improvement of products and processes, • Cost reduction of products and processes, • Statistical analysis - Minitab experience preferred, • Lead and manage prototype builds, • Equipment/ technology design in support of operations, • Experience working within and adhering to a Quality Management System such as IATF16949 and ISO 9001, • The ability to work with people at all levels of the organization and across all functions, • Knowledge of manufacturing processes such as; tube forming, brazing, welding; milling, and turning, • Strong organizational and communication skills to include customer engagement, sales support and presentations, • Implementation of Lean Manufacturing Principles, • Management of all aspects of technical projects from inception to production qualification, • Procurement of new capital equipment to include Return on Investment (ROI) analysis, • Execution of work assignments with minimal follow-up supervision, • Mentoring of less experienced engineers Essential Duties and Responsibilities: • Execute Engineering assignments to support new product introductions and steady state manufacturing, • Provide daily technical support to operations to include problem solving, • Manage the product life cycle (design through production qualification) for all fixtures and tools, • Manage all design changes into production, • Manage/ lead the ECN process, • Technical support to quality, • Develop and manage equipment validations, • Develop training for operators for new and existing equipment, • Develop manufacturing processes that are safe, provide superior product quality, and are cost effective, • Identify and execute on cost reduction opportunities, • Identify and execute on manufacturing process improvement opportunities related to safety, quality, delivery and cost • Lead and manage prototype builds, • Technical support to sales during customer engagement for new products, quality issues, etc., • Prepare capital expenditure proposals, • Become the subject matter expert for all production equipment and technologies, • Understand and implement Lean Manufacturing principles, • Develop and maintain the plant layout to ensure operations safety, quality, delivery and cost optimization, • Develop and maintain design standards and best practices, • Technical support to sales during customer engagements to include presentations, sales calls/ visits, etc. Pay Range: $90,000-115,000. The referenced pay range represents the minimum and maximum compensation for this job. Individual annual salaries/hourly rates will be set within the job’s compensation range, and will be determined by considering factors including, but not limited to, market data, education, experience, qualifications, expertise of the individual, and internal equity considerations. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit for extended periods, use hands to operate a computer and other office equipment, and communicate effectively via phone and email. The employee may occasionally be required to stand, walk, reach with hands and arms, and lift or move items weighing up to 10 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Optum is a global organization that delivers care, aided by technology to help millions of people live healthier lives. The work you do with our team will directly improve health outcomes by connecting people with the care, pharmacy benefits, data and resources they need to feel their best. Here, you will find a culture guided by diversity and inclusion, talented peers, comprehensive benefits and career development opportunities. Come make an impact on the communities we serve as you help us advance health equity on a global scale. Join us to start Caring. Connecting. Growing together. \n Multi-Specialty, part of Optum, has an immediate opening for a friendly, patient focused and detailed oriented Patient Services Representative to join our team. Patient Services Representative is responsible for the completion of set processes and protocols. Works cooperatively with all members of the care team to support the vision and mission of the organization, deliver excellent customer service and adhere to Lean processes. Supports the teams in meeting financial, clinical and service goals. \n The Patient Services Representative greets and registers patients in a prompt, pleasant and helpful manner, as well as instructs, directs, and schedules patients and visitors. The Patient Services Representative receives payments from patients, issues receipts and posts payment data. \n Schedule: Office is open seven days a week. This role would consist of a 37.5 hour work week, between the hours of 11:30 am to close (approximately 8:30 pm). The schedule will be determined by the supervisor upon hire. \n Location: 61 Emerald Place, Rock Hill, NY 12775 \n Primary Responsibilities: \n\n • Adheres to standards of professionalism set by the Practice\n, • Always maintains professional appearance by adhering to dress code and wearing identification badge \n • Demonstrates and maintains professionalism in behavior and courtesy toward the patients and staff\n, • Respects confidentiality and is HIPAA compliant in all aspects of communication regarding patient, Practice and staff members\n, • Functions as a member of a team committed to quality patient care\n, • Takes initiative to keep informed of new/revised Policy and Procedures, Standards of Care and incorporates these into practice \n • Attends and participates in mandatory quarterly staff meetings or reads minutes\n, • Completes Mandatory Education annually\n, • Attends/participates in training/review classes and projects as assigned\n, • Handles difficult situations and people with tact, professionalism and H.E.A.R.T\n, • Demonstrates good judgment in escalating difficult situations and people to Management personnel\n, • Demonstrates professionalism in attendance & punctuality. Consider number of unauthorized or unscheduled absences, a pattern of before and after weekend absences, tardiness and early departures, and long meal periods in accordance with CRHC policy\n, • Promotes a positive work attitude fostering teamwork and acceptance of management decisions\n, • Supports peer to peer training initiative for new Patient Services employees\n, • Assists co-workers whenever possible, to achieve office goals / patient satisfaction\n, • Works independently, takes initiative in completing assignments and does so without reminder\n, • Completes all miscellaneous work assigned by leadership or Physician accurately and in a timely manner\n, • Opens office as needed; turns on copiers, terminals and printers, and updates computer for current day’s session\n, • Communicates with clinical staff to keep patient informed of appointment status\n, • Verifies insurance eligibility and coverage by phone, independent website, RTS, Phreesia or at time of service\n, • Verifies patient demographic and insurance information at time of visit. Assures all demographic and insurance information is accurate, complete and up to date in the patient's chart. Scans current insurance card and photo identification into system\n, • Provides, explains and reviews for accurate completion, all Registration forms, i.e. Patient Representative, Patient Registration form, and Family Information form where applicable and obtains signatures as required\n, • Provides and explains the Authorization to Release Health Information to patient at their request\n, • Determines balances due including past balance, co-payments, co-insurance and deductibles, referring to Patient Accounts as necessary; takes responsibility for collecting and posting payments from patients at time of service via checks, cash or credit card in compliance with Cash Control Policies and Procedures\n, • Invite patient’s with the Patient Portal enrollment (PxP) in compliance with Meaningful Use guidelines\n, • Provides After visit Summary in compliance with ACO guidelines\n, • Prepares Batch Report daily to total and balance collections\n, • Begins the check in process in EPM, Phreesia, and Siemens. Act on notations in all systems and completes the auto-flow process successfully\n, • Schedules /Cancels /Reschedules patient appointments as ordered by the physician adhering to scheduling policies and procedures\n, • Obtains or issues HMO insurance referrals as required for maximum reimbursement of services rendered\n, • Notifies management or other departments appropriately using Clerical Templates for various issues/requests/reasons\n, • Maintains supply inventories and equipment necessary for the effective performance of the job; communicates supply needs to the office supervisor in a timely manner\n, • Maintains a neat, organized, orderly environment in the reception and waiting room areas, i.e . magazines, physician business cards, brochures, signage, etc\n, • Closes office as needed, ensuring that lights, terminals and office machines have been turned off and all patients accounted for and discharged. May be required to set alarm\n, • Actively demonstrates good oral and written communication skills with both internal and external customers\n, • Demonstrates flexibility in schedule to meet patient and office needs\n, • Works with a sense of urgency\n \n\n • Paid Time Off which you start to accrue with your first pay period plus 8 Paid Holidays \n • Medical Plan options along with participation in a Health Spending Account or a Health Saving account \n • Dental, Vision, Life& AD&D Insurance along with Short-term disability and Long-Term Disability coverage \n • 401(k) Savings Plan, Employee Stock Purchase Plan \n • Education Reimbursement \n • Employee Discounts \n • Employee Assistance Program \n • Employee Referral Bonus Program \n • Voluntary Benefits (pet insurance, legal insurance, LTC Insurance, etc.) \n \n\n You’ll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: \n\n • High School Diploma/GED (or higher) \n • 1+ years of customer service or healthcare related experience \n • Intermediate level of computer proficiency (including being able to work on multiple web browsers using dual monitors at the same time to include Microsoft Outlook) \n\n Preferred Qualifications: \n\n • Experience as a receptionist in a healthcare setting \n • Experience working with an electronic health records \n • Experience working with scheduling programs \n • Knowledge and ability to learn and apply job functions, and minimal medical terminology knowledge \n\n Soft Skills: \n\n • Ability to work independently and as a team, and maintain good judgment and accountability \n • Demonstrated ability to work well with health care providers \n • Strong organizational and time management skills \n • Ability to multi-task and prioritize tasks to meet all deadlines \n • Ability to work well under pressure in a fast-paced environment \n • Excellent verbal and written communication skills; ability to speak clearly and concisely, conveying information in a manner that others can understand, as well as ability to understand and interpret information from others \n\n \n New York Residents Only: The salary range for New York residents is $16.00 to $28.27 per hour. Pay is based on several factors including but not limited to local labor markets, education, work experience, certifications, etc. UnitedHealth Group complies with all minimum wage laws as applicable. In addition to your salary, UnitedHealth Group offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with UnitedHealth Group, you’ll find a far-reaching choice of benefits and incentives. \n \n\n At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone–of every race, gender, sexuality, age, location and income–deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes — an enterprise priority reflected in our mission. \n\n\n \n\n\n \n\n\n Diversity creates a healthier atmosphere: UnitedHealth Group is an Equal Employment Opportunity / Affirmative Action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, protected veteran status, disability status, sexual orientation, gender identity or expression, marital status, genetic information, or any other characteristic protected by law. \n\n\n UnitedHealth Group is a drug - free workplace. Candidates are required to pass a drug test before beginning employment. \n \n \n\n #RPO, #RED

Job Description At TireHub we move more than tires – we move businesses forward, support communities, and help keep America rolling. And behind it all? Our people. We call them Hubbers – because they’re at the center of everything we do. From behind the wheel to the warehouse floor, from customer calls to corporate strategy, every Hubber plays a role in something bigger than themselves. And we show up every day ready to say yes – to challenges, to each other, and to getting it done right. Visit to learn more. Process Lead – Warehousing Role Summary: The Process Lead plays an integral role in streamlining and enhancing the efficiency of business operations. This position involves overseeing the development, implementation, and adherence to processes that improve workflow and reduce operational bottlenecks. By closely monitoring performance metrics and collaborating with various departments, the Process Lead ensures that the organization’s standards are met and that continuous improvement strategies are in place. The Process Lead expertise in process management enables them to identify areas for improvement, recommend solutions, and facilitate the adoption of best practices across the organization, ultimately supporting the achievement of business objectives with a focus on efficiency, quality and safety. When you say YES to something bigger: • Premium Free Hubber-Health Insurance, • TireHub funded Health Savings Account, • Additional benefit options including TireHub paid short/long term disability and life insurance benefits, • Paid vacation and holidays, • Parental leave programs, • Build your financial future with 401(k) including TireHub match, • Access to tire discounts, perks, and so much more! The individual must exhibit the following core TireHub commitments: · Approachable - If a company could smile, we would. Instead, we rely on our people to show it. We care about each other and our customers because we know business only gets done right when people respect each other and value relationships. · Adventurous - What TireHub is set up to do is intentionally outrageous. So, we readily embrace challenges with the courage to introduce new ideas and the ambition to build something unique. · Relentless - We tackle our work with energy. We deliver on our commitments with enthusiasm. And we don't give up until we get to the end. · Speedy - Speed is the currency in the tire industry. When we commit to a job, we get the job done – and we do it fast. Role Specifics: • Oversees the development and implementation of new processes to enhance productivity and efficiency within the organization., • Analyzes existing workflows and identify areas for improvement, recommending changes to minimize bottlenecks and streamline operations., • Facilitates cross-functional team meetings to ensure alignment on process improvement initiatives and gather input from various stakeholders., • Documents all process changes and updates, creating comprehensive manuals and guidelines for staff training and reference., • Implements quality control measures to ensure that all processes meet the required standards and comply with industry regulations., • Monitors the performance of implemented processes, using metrics and KPIs to assess their effectiveness and make adjustments as necessary., • Coordinates with the IT department to ensure that technological tools and systems are aligned with process requirements, optimizing software and hardware to support workflow enhancements., • Leads the transition management for process changes, ensuring that all staff are adequately trained on new procedures and that changes are smoothly integrated into daily operations., • Stays up to date on industry trends and best practices. Competencies: • Optimizes Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on safety and continuous improvement., • Manages Ambiguity: Operating effectively, even when things are not certain, or the way forward is not clear., • Drives Results: Consistently achieving results, even under tough circumstances., • Collaborates: Building partnerships and working collaboratively with others to meet shared objectives, • 5+ years of applicable work experiences with a heavy focus on warehouse operations and warehouse management systems, • Experience leading diverse project teams with a proven track record., • Experience with KPI management, • Experience with Process improvement and an understanding of lean methodologies., • Strong leadership and team-building skills, • Demonstrated people skills including influencing skills, listening and the ability to communicate effectively to diverse groups., • Lead, motivate, influence and support RDC team within a time-sensitive and demanding environment., • Strong planning and organizational skills, including the ability to coordinate a variety of different projects and individuals and to adapt to unforeseen and unexpected requests or changes in priorities required., • Ability to collaborate with business leaders and peers across the organization to anticipate, identify, recommend, and implement creative operational and customer service solutions., • Proven track record of process improvement and operational excellence, • Excellent communication, problem-solving, and decision-making skills, • Highly analytical with a keen eye for detail Location: This position is remote. Candidates must reside on the Eastern side of the United States. Salary Range: $85,000 to $107,000 TireHub will consider the employment of all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws. TireHub maintains a drug-free workplace in accordance with state and federal law.

Job Description Join Kistler – A Global Leader in Measurement Technology! Kistler is the global leader in dynamic measurement technology for measuring pressure, force, torque, and acceleration. Cutting-edge technologies provide the basis for Kistler's modular solutions. Customers in industry and science benefit from Kistler's experience as a development partner, enabling them to optimize their products and processes so as to secure a sustainable competitive edge. The owner-managed Swiss company's unique sensor technology plays a key role in the evolution of automobile development and industrial automation. Kistler is making an important contribution to the further development electrified drive technology, automated and connected driving, emission reduction and smart factories. Our Buffalo location focuses on Piezoelectric, Piezoresistive, & MEMS Sensors, electronics, and instruments. Purpose of the Position This position is responsible for managing documents, equipment, tooling, and fixturing required to manufacture the diverse portfolio of products made by Kistler Instrument Corp. (KIC) Production Facility. The manufacturing engineer develops and troubleshoots manufacturing processes in order to improve product quality, cost, and/or lead-time. This includes investigation and proposal of new production equipment, process procedures, and methods to automate, improve, and/or scale-up new and existing processes. Main Tasks • Provides technical support and improve manufacturing lines by specifying and/or refining BOMs, routings, work instructions, and test procedures., • Design, document, procure, qualify, implement, and improve fixtures, tools and equipment., • Provides documentation and training on assembly methods, test procedures, and production equipment., • Troubleshoots day-to-day process performance issues, develop solutions, and monitor improvements., • Works closely with R&D engineering, quality, purchasing, and planning to ensure products meet specified requirements., • Analyze and plan work force utilization, space requirements, and workflow. Design layouts of equipment and workspaces in conjunction with Kistler’s Lean Initiatives for maximum production efficiency., • Collaborates with R&D engineering design staff to develop manufacturing methods for new products., • Responsible for change management and implementation for changes to manufacturing processes., • Identify and lead continuous improvement efforts using Lean and Six Sigma tools to optimize production operations., • Performs other duties as assigned., • Bachelor’s degree (B.S.) from a four-year technical or engineering college or university and a minimum of 2-5 years’ related experience or equivalent of education and experience., • Strong communication, interpersonal, and teamwork skills., • Able to manage multiple projects and prioritize work appropriately to meet commitments., • Demonstrated proficiency in Microsoft Word, PowerPoint, Outlook, and Excel., • Experience with ERP/MRP systems (SAP preferred) relevant to manufacturing operations., • Experience with engineering change systems., • Ability to interpret and create (Solidworks preferred) complex technical drawings, schematics, and specifications., • Experience with LabVIEW or TestStand a plus. At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: Medical, dental, vision, life, and disability coverage 401(k) plan with a 4% company match Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job Description Who We Are: OneBridge Benefits was founded in 2013 with the vision to create better technology to support account-based health plans. Fast forward to today and we continue to be in growth mode, as a premier healthtech company servicing over 250,000 participants with over 2 billion dollars in health accounts. In becoming part of the OneBridge Benefits team you would be joining a group of bright, driven, and creative individuals. We have built an environment that creates opportunities for our people to serve greater roles within specialized teams as we never lose sight of the pursuit of individual passions. We strive to go above and beyond, and embrace open communication, collaboration, and flexibility to achieve our mission. Check out our careers page for more information on the Company and our Core Values: onebridgebenefits.com/careers/ The Person We’re Looking For: Our Quality Assurance Analyst II plays an important role to help ensure our product releases are error-free while meeting the business requirements. This is a results-oriented, metric-driven, technical role focused on ensuring data integrity and functional performance of overall product and integrated customer facing systems. The role’s primary responsibility is to perform risk based functional, performance, and regression software testing within an evolving product development environment that is flexible based on delivery expectations and customer demand. Expected Job Duties: • Test core products and new initiatives, • Collaborate with designers, developers, and stakeholders to understand business logic, • Document specifications and maintain test matrices, • Prepare environments and execute regression and UAT testing, • Validate releases and reconcile results, • Mentor junior QA team members, • Strong problem-solving and risk assessment skills, • Experience with Selenium or similar automation tools, • Proficient in SQL and relational databases, • Excellent communication and organizational skills, • Team-oriented with strong interpersonal skills, • Knowledge of SDLC (Waterfall, Agile, Lean), • Bachelor’s degree in Computer Science, Mathematics, Business, Technology or related discipline or an equivalent combination of related education and work experience, • 2-5 years of experience in QA testing, auditing, or implementation of software solutions On-Site, Buffalo, NY Full-Time; Monday-Friday

Job Description About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our car's are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: This is a supervisory position in an Inspection Center overseeing a team carrying out daily operations within a Carvana Inspection Center.. The Reconditioning Manager oversees all aspects of the vehicle reconditioning process and directs at least five leads and up to 70 front line associates in a lean manufacturing environment. This role will be responsible for maintaining a culture of continuous improvement and high associate engagement while meeting quality, production, and cost objectives. This position is not eligible for visa sponsorship. Salary range - $75,000-$90,000 annually What you'll be doing: • Oversee day-to-day operations within the Inspection Center., • Provide mentoring and accountability to direct reports and succession planning through appropriate coaching, leadership development and training, and performance management., • Participate in the development and execution of strategic plans, goals, and objectives, ensuring alignment with those of the company., • Ensure adherence to operating standards, systems, policies, procedures, and performance standards., • Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values., • Maintain supervisory staff by recruiting, selecting, orienting, and training employees., • Ensure progression path training and certification processes are consistently executed., • Train and mentor leads and associates by providing competency-based feedback., • Ensure adequate production capacity levels for each line and assist with production planning., • Ensure compliance with all health and safety and loss prevention guidelines., • Provide vision and guidance to the reconditioning team in meeting performance metrics., • Positively reinforce and engage the team regarding quality, production and cost objectives., • Participate in and lead problem solving and continuous improvement efforts. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. • 5 years of management experience either in automotive or a lean manufacturing environment., • Knowledge of lean manufacturing principles., • Experience leading and developing associates., • Proven ability to obtain project deliverables and company metrics., • Ability to read, write, speak and understand English., • Must be at least 18 years of age., • Valid unrestricted driver's license with a clean driving record in the last 3 years., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Excellent written, verbal and interpersonal communication skills., • Ability to work with and through teams to achieve results, • Strong analysis and decision making ability., • Proficient computer skills., • Ability to work overtime and on weekends., • Ability to walk up to three miles each day., • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Must be able to lift up to 40 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels. Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories.

Job Description Join Kistler – A Global Leader in Measurement Technology! At Kistler, we’re revolutionizing industries with our cutting-edge dynamic measurement technology, helping customers optimize products and processes. From automobile development to smart factories, our Swiss-designed sensor solutions are driving the future of electrified drive technology, industrial automation, and emission reduction. Purpose of the Position We are seeking a Vice President of Operations and Engineering to lead our North American production, engineering, and logistics footprint. This leader will drive our localization strategy, concentrating manufacturing and engineering to serve our key regional focus markets, which include MedTech, Aerospace and Defense, Infrastructure, and Automotive Production. The role will build operational excellence across our footprint, deliver strong connection to customers, and ensure scalable capacity as the market grows. Main Tasks • Lead the implementation of the localization strategy, focusing production and engineering for North American focus markets., • Oversee Operations, including logistics, planning, purchasing, assembly and the machine shop., • Provide strategic and operational leadership for Engineering, including Custom Product Engineering, Application Engineering, and R&D interfaces., • Ensure organizational structure, processes, and capabilities are in place to support full lifecycle engineering from requirements gathering and feasibility analysis to design, validation, release, and production ramp-up., • Take ownership for the Custom Product Engineering organization, including technical content responsibility, decision authority on engineering concepts, and overall delivery quality., • Lead Quality Management and Assurance as part of Operations, including compliance systems, audits, and continuous improvement., • Ensure adherence to AS9100D, ISO 9001, and ISO 17025., • Manage production and engineering KPIs, such as productive hours, delivery reliability, throughput, scrap rate, and on-time launch of development and improvement projects., • Establish performance dashboards and drive data-based decisions using Celonis, Power BI, and other analytics tools., • Provide strong, presence-based leadership at the Amherst site, fostering a culture of accountability, teamwork, safety, and continuous improvement., • Collaborate closely with Sales Directors and the General Manager to maintain proximity to customers and align operations with commercial priorities., • Represent Operations and Engineering during customer meetings, audits, and site visits., • Develop and manage capital investment plans for production assets, engineering equipment, and process capabilities., • Maintain functional alignment with corporate platform leaders in Engineering and Production., • Ensure seamless cross-functional collaboration between Engineering, Production, Sales, Quality, and Product Management to enable customer-centric, technically sound solutions., • Lead and develop teams in accordance with Kistler leadership principles, ensuring talent development, succession planning, and retention. Requirements Profile • Experienced Operations and Engineering leader with a successful track record in complex industrial or high-precision environments., • Twelve or more years of progressive leadership experience in manufacturing, operations, or engineering; experience in MedTech, Aerospace and Defense, Infrastructure, or Automotive Production is highly valued., • Proven leadership of engineering organizations, including responsibility for product engineering, design, customization, and technical decision-making., • Hands-on leadership style, comfortable engaging directly with teams on the shop floor, in labs, and across operations., • Strong understanding of ERP and manufacturing execution systems; SAP experience strongly preferred., • Skilled in lean manufacturing, digital operations, capacity planning, and cross-functional coordination., • Demonstrated success in budget management, capital investment planning, and asset utilization., • Excellent communication, stakeholder engagement, and decision-making skills., • Commitment to continuous improvement and operational excellence., • Willingness to travel occasionally to Novi, MI, and other sites. Why Kistler? At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: • Medical, dental, vision, life, and disability coverage, • 401(k) plan with a 4% company match, • Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job DescriptionSalary: $55,000 - $70,000 + Bonus About Us Orthodent Laboratory (ODL) is a digital orthodontics and dental lab that offers doctors a full range of traditional appliances and digital solutions, providing orthodontists with a pathway to growth and clinical excellence. For more than 40 years, ODL has served orthodontists across the nation by combining exceptional quality with superior customer service. In addition, our commitment to innovation is unparalleled. We are driven by quality and guided by family. Please visit our website to read more about our history. The Role We are currently seeking a Production Manager who will be responsible for managing the daily operations and performance of their assigned production unit. This includes implementing and managing performance, development, and culture initiatives and being accountable for managing and utilizing all people and resources to achieve set production metrics. A primary duty of this role will be people leadership and development, including training and engagement of our highly-skilled staff members to deliver superior products. The success of this role will heavily depend on leadership skills and the ability to empower and engage team members. This is a full-time position at our Buffalo corporate headquarters on Chandler Street in Buffalo. What Youll Do Primary Duties: • Lead a team to ensure efficient production and delivery of orthodontic products while maintaining high-quality standards., • Oversee your team, ensuring resources, staffing, and schedules align with production needs., • Utilize data to drive decisions and improve production results., • Lead team meetings and participate in next level meetings and problem solving with your peer group., • Manage personnel decisions: hiring, quarterly conversations, disciplinary action, succession planning., • Coordinate across departments as needed to ensure smooth operations., • Focus on people leadership and development, including training, mentoring, and staff engagement., • Implement Lean Manufacturing principles to eliminate waste, streamline processes, and maintain consistent hourly production output., • Ensure the on-time delivery of production orders., • Troubleshoot and resolve production issues to minimize downtime and delays., • Collaborate with cross-functional teams to enhance technology, processes, and outcomes., • Departmental production metrics (output, quality, OEE, safety record)., • Continuous improvement initiatives and process optimization., • Team culture, performance management, and retention within your team(s)., • Resource management for your assigned department(s). What Well Love About You • Previous experience in a leadership role in a manufacturing environment., • Bachelors degree (preferred) Technical or Operational in nature., • Demonstrated previous experience in change implementation/management., • Previous experience managing critical equipment (uptime, OEE, PM processes), • Team oriented, high attention to detail and good communication skills to work closely inter-departmentally and within an assigned team., • Demonstrated experience working collaboratively and effectively with organizational leadership., • Strong verbal and written communication skills and the ability to work effectively in a fast-paced, dynamic organization., • Ability to comfortably provide feedback (both positive and constructive) to team members., • Lean Manufacturing experience a plus What Youll Love About Us • Up to 3 weeks Paid Time Off, • 9 Paid Holidays, • Performance Based Bonuses, • 401k with company match, • Company Paid Life Insurance, • Health Benefits such as medical, vision and dental., • Beautiful, clean and new working environment, • Company events

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our Machine Repair, CNC Specialist position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10 minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. What We Offer You: • Starting wage $33.66/hour, incremental increases move to $37.36 after one year, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections, • Performs electronic, electrical, and general mechanical maintenance, repair, and rebuild, on all types of plant machinery, including computer numerical controlled (CNC) equipment., • Must be able to diagnose trouble with, and repair hydraulic, pneumatic, electronic, AC & DC motors, programmable controllers (PLC's) systems, and PC hardware and ladder logic., • Will be responsible for the installation and dismantling of equipment/machinery in the plant., • This position may be required to perform Machine Repair A or other related maintenance duties as directed by the department supervisor. Qualifications: • High School degree or equivalent and 2-3 years of applied trades training, • 3-5 years machine repair, CNC experience required, • Ability to read schematics and prints, as well as use precision measuring and diagnostic tools required., • Ability to work directly and communicate effectively with plant supervision and equipment manufacturers is critical. INDZ

Job DescriptionSummary:A well-established general contractor is seeking an experienced Superintendent / Project Manager to lead upcoming phased commercial renovation projects. This position combines field leadership with project management, requiring a balance between hands-on supervision and detailed administrative oversight. The ideal candidate is organized, technically savvy, and experienced in managing fast-paced, multi-phase construction environments. Key Responsibilities: * Oversee all onsite construction activities including scheduling, logistics, trade coordination, and progress tracking * Manage daily reports, RFIs, submittals, and change management using Procore * Develop and maintain project schedules in MS Project, implementing Lean Construction principles through weekly huddles and work plans * Track trade productivity and progress, ensuring accurate adjustments week to week * Conduct site meetings, prepare minutes, and manage communication across field and office teams * Ensure safety, cleanliness, and operational coordination within active facilities * Review submittals and specifications, ensuring quality control and design compliance * Collaborate with the project team to plan shutdowns, phasing, and material delivery sequencing * Lead subcontractors and site staff with professionalism and accountability Qualifications: * 7+ years of experience as a Superintendent or Project Manager in commercial construction * Strong background in MEP coordination, renovation, or facility upgrade projects * Proficiency with Procore, MS Project, and digital documentation tools * Experience running Lean Construction workflows and short-interval planning * Excellent communication and leadership skills with the ability to manage multiple stakeholders * Technically inclined and comfortable managing both field execution and project documentation What’s Offered: * Opportunity to lead complex multi-phase commercial projects with long-term regional work * Company vehicle or allowance, mobile technology package (phone, tablet, etc.) * Strong healthcare, PTO, and benefit programs * Collaborative culture focused on accountability, teamwork, and field leadership

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Plant Manager provides strategic and hands-on leadership to ensure safe, efficient, and high-quality dairy production. This position is accountable for daily operations, including production, maintenance, quality, and workforce development. The Plant Manager drives a culture rooted in the Seven for Success (SFS) framework — championing Safety first, maintaining the highest Quality standards, improving Productivity, strengthening Customer Service relationships, promoting open Communication, developing employees through Training, and fostering Continuous Improvement in every process. This individual serves as a key member of the Operations Leadership Team and collaborates across departments to support growth, modernization, and organizational excellence. Key Responsibilities: Oversee Daily Production Operations • Direct all plant operations to ensure production schedules, quality standards, and cost targets are achieved., • Maintain effective communication across shifts to ensure consistent performance., • Ensure compliance with all federal, state, and local regulations (FDA, USDA, HAACP, OSHA, SQF, etc.)., • Partner with Quality Assurance to uphold product integrity and food safety systems., • Coach, mentor, and develop supervisors and frontline employees to foster a culture of accountability and teamwork., • Track key performance indicators (KPIs) such as throughput, yield, OEE, quality, and labor efficiency., • Develop and manage annual operating budgets and capital plans., • Lead Lean, Six Sigma, and CI efforts to enhance efficiency and reduce waste., • Partner with Quality, Maintenance, Supply Chain, Finance, and HR to achieve business objectives., • Oversee preventive and predictive maintenance programs to minimize downtime and extend equipment life., • Promote a proactive safety culture with zero tolerance for unsafe practices., • Develop and execute long-term operational strategies that align with cooperative growth objectives., • Ensures Accountability: Holds self and others responsible for meeting commitments., • Communicates Effectively: Delivers clear, timely, and respectful communication across levels., • Manages Complexity: Makes sound decisions amid uncertainty and competing priorities., • Customer Focus: Builds strong relationships and ensures satisfaction through consistent quality and service., • Directs Work: Delegates effectively and sets clear expectations for performance and results., • Financial Acumen: Understands budgets, cost drivers, and financial impacts of operational decisions., • Drives Results: Consistently delivers against production, safety, and financial targets. Manufacturing Systems and Process Knowledge • Deep understanding of dairy and food processing systems including pasteurization, separation, homogenization, and packaging., • Knowledge of Good Manufacturing Practices (GMPs), Sanitation Standard Operating Procedures (SSOPs), and 5S workplace organization., • Proficiency in HACCP, SQF, FDA, USDA, and state regulatory requirements., • Skilled in root cause analysis (RCA), corrective/preventive action (CAPA), and audit management., • Knowledge of Total Productive Maintenance (TPM), preventive and predictive maintenance strategies., • Experience with computerized maintenance management systems (CMMS)., • Application of Lean Six Sigma tools (5 Whys, DMAIC, Kaizen, Value Stream Mapping, SPC)., • Proven ability to lead process-improvement teams to reduce waste and enhance yield., • Experience with ERP systems such as SAP S/4HANA for production planning, scheduling, and inventory control., • Strong command of Integrated Business Planning (IBP), Master Production Scheduling (MPS), and Material Requirements Planning (MRP)., • Working knowledge of OSHA standards, lockout/tagout (LOTO), and confined space entry procedures., • Familiarity with environmental regulations related to wastewater, energy management, and waste disposal., • Ability to manage plant budgets, capital projects, and cost-control initiatives., • Understanding of key cost drivers such as labor, energy, and materials., • Experience implementing competency-based training programs and on-the-job learning systems., • Ability to use digital training tools (Enable Now, WalkMe, LMS platforms)., • Familiarity with Industry 4.0 and digital manufacturing tools such as IoT sensors and predictive analytics., • Bachelor’s degree in Operations Management, Engineering, Food Science, or related field (preferred)., • Minimum 5 years of leadership experience in food or dairy manufacturing., • Strong knowledge of GMP, SQF, HACCP, and other regulatory standards., • Demonstrated ability to lead cross-functional teams and manage change., • Proficiency in Microsoft Office and ERP systems (SAP experience preferred)., • Must be able to work in a manufacturing environment with exposure to temperature variation, noise, and physical activity., • Ability to stand and walk for extended periods and occasionally lift up to 50 pounds. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description At TireHub we move more than tires – we move businesses forward, support communities, and help keep America rolling. And behind it all? Our people. We call them Hubbers – because they’re at the center of everything we do. From behind the wheel to the warehouse floor, from customer calls to corporate strategy, every Hubber plays a role in something bigger than themselves. And we show up every day ready to say yes – to challenges, to each other, and to getting it done right. Visit to learn more. Process Specialist, Warehousing Role Summary: The Process Specialist, Warehousing plays an integral role in preparing teams for the change management process and driving the transformation and evolution of fundamental supply chain technology. This role will focus on the development of training material with partners, train Hubbers who work in TireHub Logistics Centers to learn new systems, and perform other operational readiness activities as needed to prepare local teams for WMS deployment. The Training Lead works with all project resources and impacted operations to build trust and consistent, productive lines of communication. Reporting to the Process Lead - Warehousing, this role works across physical operations and logical IT processes, to respond quickly to changing business needs & priorities by managing change and improving adoption of new processes. This role rapidly earns trust with both stakeholders and team members and work effectively with cross-functional teams, ultimately supporting the achievement of business objectives with a focus on efficiency, quality and safety. When you say YES to something bigger • Premium Free Hubber-Health Insurance, • TireHub funded Health Savings Account, • Additional benefit options including TireHub paid short/long term disability and life insurance benefits, • Paid vacation and holidays, • Parental leave programs, • Build your financial future with 401(k) including TireHub match, • Access to tire discounts, perks, and so much more! The individual must exhibit the following core TireHub commitments: · Approachable - If a company could smile, we would. Instead, we rely on our people to show it. We care about each other and our customers because we know business only gets done right when people respect each other and value relationships. · Adventurous - What TireHub is set up to do is intentionally outrageous. So, we readily embrace challenges with the courage to introduce new ideas and the ambition to build something unique. · Relentless - We tackle our work with energy. We deliver on our commitments with enthusiasm. And we don't give up until we get to the end. · Speedy - Speed is the currency in the tire industry. When we commit to a job, we get the job done – and we do it fast. Role Specifics: • Establishes and maintains relationships with business and technology stakeholders to drive product adoption and understanding through effective training programs., • Reviews functionality in product demos to ensure the value and quality of features., • Develops, documents, disseminates, and maintains comprehensive Standard Operating Procedures for WMS processes., • Partners with process owners, lead operators, or other stakeholders through training exercises to ensure a sound understanding of new processes and supporting technologies., • Leads any business or operational readiness task related to WMS process adoption, training or improvement (i.e. any advanced process alignment tasks that can be done to get closer to future state now)., • Serves as a super-user and cut-over agent during go-live; and floor support for end-users during WMS cutover and go-live support., • Leads communication efforts in the field to build positive momentum for the WMS program throughout its lifetime., • Analyzes existing workflows and identifies areas for improvement, recommending changes to minimize bottlenecks and streamline operations., • Facilitates cross-functional team meetings to ensure alignment on process improvement initiatives and gather input from various stakeholders., • Monitors the performance of implemented processes, using metrics and KPIs to assess process adoption and effectiveness & adjusts change management strategy as necessary., • Coordinates with the IT department to ensure that technology tools and systems are aligned with process requirements, optimizing software and hardware to support workflow enhancements., • Leads, motivates, influences and supports RDC/TLC teams within a time-sensitive and demanding environment., • Remains currrent on industry trends and best practices. Competencies: • Optimizes Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on safety and continuous improvement., • Manages Ambiguity: Operating effectively, even when things are not certain, or the way forward is not clear., • Drives Results: Consistently achieving results, even under tough circumstances., • Collaborates: Building partnerships and working collaboratively with others to meet shared objectives, • 5+ years of applicable work experience with a heavy focus on warehouse operations and warehouse management systems, • Experience leading diverse project teams with a proven track record., • Experience with KPI management, • Experience with Process improvement and an understanding of lean methodologies., • Training experience or implementation of new systems, technology, and tools., • BS/BA in Industrial Engineering, Process Management, Logistics, Business administration or related field preferred, • Proven track record of training program management, process improvement and operational excellence Knowledge, Skills, and Abilities: • Strong leadership and team-building skills, • Demonstrated people skills including influencing skills, listening, and the ability to communicate effectively to diverse groups., • Strong planning and organizational skills, including the ability to coordinate a variety of different projects and individuals and to adapt to unforeseen and unexpected requests or changes in priorities required., • Ability to collaborate with business leaders and peers across the organization to anticipate, identify, recommend, and implement creative operational and customer service solutions., • Excellent communication, problem-solving, and decision-making skills, • Highly analytical with a keen eye for detail This is a fast-paced and dynamic operating environment requiring commitment, high levels of energy, and an all-in attitude in a culture where we truly look out for, and care for, one another. The position typically works in a field warehouse setting but will occasionally spend time in an office environment, at a desk working on a computer. Note: This job description serves as a general overview of the typical responsibilities and qualifications for a Process Specialist, Warehousing position. Specific duties and requirements may vary depending on the organization, industry, and regional considerations. Location: This position is remote. Salary Range: $69,000 to $86,000 TireHub will consider the employment of all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws. TireHub maintains a drug-free workplace in accordance with state and federal law.

Job DescriptionJob Title: CAD AdministratorLocation: Goodyear, AZ (On-Site) Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | ExemptAbout GTI EnergyGTI Energy, a division of GTI Fabrication, is a leader in industrial modular fabrication—serving energy, defense, and heavy industrial markets. With advanced engineering and manufacturing facilities in Arizona and New York, GTI designs and builds mission-critical modular systems, including data centers, enclosed battery systems, and energy storage devices.As we continue to expand, we are enhancing our engineering systems infrastructure to drive collaboration, efficiency, and precision across mechanical, electrical, and structural design disciplines.Position OverviewGTI Energy is seeking a skilled CAD Administrator to lead the implementation, management, and optimization of GTI’s CAD and design data systems. This individual will serve as the technical expert and process owner for SolidWorks, SolidWorks PDM, AutoCAD, Revit, and related engineering tools used across the company.The CAD Administrator will be responsible for maintaining system integrity, standardizing workflows, enforcing design standards, and ensuring all engineering teams—mechanical, electrical, and structural—operate efficiently and cohesively.This is a hands-on role requiring both strategic and tactical ownership of CAD systems, templates, and data management processes.Key ResponsibilitiesSystem Administration & Configuration • Administer and maintain GTI’s CAD environment, including SolidWorks 3DExperience, SolidWorks PDM, AutoCAD, and Revit., • Lead the migration from 3DExperience to SolidWorks PDM, overseeing configuration, data migration, and user adoption., • Manage user access, workflows, and permissions within CAD/PDM platforms to ensure compliance and data integrity., • Maintain system templates, drawing standards, and libraries for consistency across disciplines., • Support integration between CAD systems and GTI’s Dozuki work instruction software to ensure seamless flow of engineering data to the production floor.Training & Support, • Develop and deliver user training on CAD best practices, standards, and PDM workflows., • Provide first-line support for CAD-related issues, troubleshooting modeling, file management, and workflow challenges., • Coach engineers and designers on efficient modeling techniques, revision control, and system utilization.Process Development & Standardization, • Establish and enforce company-wide CAD standards for file naming, revision management, and design documentation., • Collaborate with mechanical, electrical, and structural engineering teams to align processes across product lines., • Partner with manufacturing engineering to ensure design outputs are production-ready and optimized for fabrication.Engineering Systems Leadership, • Act as GTI’s subject matter expert for CAD/PDM system selection, configuration, and continuous improvement., • Participate in defining GTI’s long-term CAD and design systems roadmap., • Evaluate and recommend tools to improve collaboration, version control, and design throughput.Cross-Functional Collaboration, • Work closely with the IT, Engineering, and Operations teams to align CAD system capabilities with business needs., • Coordinate with suppliers and external engineering partners to ensure compatibility and compliance with GTI data standards., • Support new product introduction (NPI) and design change processes through proper CAD/PDM integration.Required Qualifications, • Bachelor’s degree in Mechanical, Industrial, or Design Engineering—or equivalent experience., • 5–8 years of experience administering SolidWorks, AutoCAD, or Revit environments in a manufacturing or industrial setting., • Demonstrated expertise in SolidWorks PDM (Professional or Manage) setup, workflow design, and user management., • Strong understanding of mechanical, electrical, and structural design principles and how they integrate in complex assemblies., • Experience developing and maintaining CAD standards, templates, and libraries., • Excellent communication, documentation, and cross-functional collaboration skills., • Proven ability to train and mentor design teams across disciplines.Preferred Qualifications, • Experience leading CAD system migrations (e.g., from 3DEXPERIENCE to PDM)., • Familiarity with industrial fabrication, modular steel construction, or energy storage systems., • Exposure to PLM systems or 3DEXPERIENCE, even if not directly responsible for implementation., • Experience integrating CAD data into work instruction platforms (Dozuki or similar)., • Knowledge of lean manufacturing principles and design-for-manufacturability (DFM) practices.Why Join GTI Energy, • Shape the future of GTI’s digital engineering systems infrastructure., • Collaborate with world-class engineers across multiple disciplines., • Competitive salary, benefits, and growth opportunities., • Be part of an innovation-driven team building mission-critical modular solutions for global markets.

Job Description Job Title: Manager, Master Production Scheduler Location: Buffalo, NY Department: Operations Employment Type: Full-Time | Exempt About GTI Energy GTI Energy, a division of GTI Fabrication, is a leader in industrial modular fabrication, serving energy, defense, and heavy industrial markets. With facilities in Arizona and New York, we specialize in high-volume, mission-critical systems such as modular data centers, enclosed battery systems, and energy storage devices. We are expanding rapidly and seeking a Master Scheduler to bring precision, accountability, and operational discipline to our production environment. Position Overview The Master Production Scheduler will be responsible for developing, maintaining, and executing the master production schedule (MPS), ensuring alignment across customer demand, materials availability, production capacity, and shop-floor execution systems. This individual will own every detail of what GTI produces—across materials, labor, equipment, and timelines—while balancing efficiency, cost, and delivery commitments. This role requires a highly analytical, detail-driven leader who thrives in fast-paced, high-growth manufacturing environments and has experience coordinating across engineering, procurement, supply chain, and plant operations. Key Responsibilities Master Scheduling & Production Planning • Develop, publish, and manage the Master Production Schedule (MPS) to meet customer demand and internal capacity constraints., • Translate sales forecasts, customer orders, and inventory targets into actionable production schedules., • Synchronize materials, labor, equipment, and MES/ERP data to support on-time delivery and minimize bottlenecks., • Conduct capacity analysis for labor, machines, and work centers across multiple production lines., • Model and forecast mid/long-term production requirements to support plant expansions or equipment investments., • Utilize Manufacturing Execution Systems (MES) to track real-time production data, machine utilization, and labor performance., • Integrate MES with ERP/MRP systems (NetSuite preferred, SAP/Oracle/JD Edwards acceptable) to maintain end-to-end visibility of orders, materials, and schedule execution., • Ensure schedule adherence by monitoring shop-floor performance through MES dashboards and reports., • Partner with procurement and supply chain teams to ensure materials availability supports scheduled production., • Identify and resolve shortages, excesses, or disruptions by proactively re-prioritizing schedules., • Serve as the central communication hub for production priorities—working closely with Engineering, Quality, Procurement, and Plant Operations., • Lead weekly S&OP (Sales & Operations Planning) or production review meetings to align all stakeholders., • Track KPIs such as on-time delivery, production attainment, first-pass yield, inventory turns, and MES-driven efficiency metrics., • Drive schedule adherence and create mitigation plans for deviations., • Bachelor’s degree in Supply Chain, Operations, Industrial Engineering, or related field., • 7+ years of experience in master scheduling, production planning, or supply chain in a high-volume manufacturing environment., • Strong proficiency with ERP/MRP systems (NetSuite preferred, SAP/Oracle/JD Edwards acceptable)., • Hands-on experience with Manufacturing Execution Systems (MES) to manage shop-floor execution., • Solid understanding of capacity planning, materials requirements planning, and production workflows., • Advanced Excel and data analysis skills (pivot tables, VLOOKUPs, formulas, dashboards)., • APICS CPIM (Certified in Production & Inventory Management) or CSCP certification., • Experience integrating MES with ERP to improve real-time scheduling accuracy., • Familiarity with ISO 9001 quality systems and compliance requirements., • Knowledge of Lean Manufacturing, Six Sigma, and Theory of Constraints (TOC) principles., • Be the owner of scheduling and MES-driven production execution at a high-growth company impacting energy, defense, and infrastructure., • Competitive salary and benefits package., • Opportunity to work with cross-functional leaders and advanced MES/ERP systems., • Lead the planning discipline for a company that values speed, accountability, and operational excellence.

Job Description About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our car's are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: This is a supervisory position in an Inspection Center overseeing a team carrying out daily operations within a Carvana Inspection Center.. The Reconditioning Manager oversees all aspects of the vehicle reconditioning process and directs at least five leads and up to 70 front line associates in a lean manufacturing environment. This role will be responsible for maintaining a culture of continuous improvement and high associate engagement while meeting quality, production, and cost objectives. This position is not eligible for visa sponsorship. Salary range - $75,000-$90,000 annually What you'll be doing: • Oversee day-to-day operations within the Inspection Center., • Provide mentoring and accountability to direct reports and succession planning through appropriate coaching, leadership development and training, and performance management., • Participate in the development and execution of strategic plans, goals, and objectives, ensuring alignment with those of the company., • Ensure adherence to operating standards, systems, policies, procedures, and performance standards., • Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values., • Maintain supervisory staff by recruiting, selecting, orienting, and training employees., • Ensure progression path training and certification processes are consistently executed., • Train and mentor leads and associates by providing competency-based feedback., • Ensure adequate production capacity levels for each line and assist with production planning., • Ensure compliance with all health and safety and loss prevention guidelines., • Provide vision and guidance to the reconditioning team in meeting performance metrics., • Positively reinforce and engage the team regarding quality, production and cost objectives., • Participate in and lead problem solving and continuous improvement efforts. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. • 5 years of management experience either in automotive or a lean manufacturing environment., • Knowledge of lean manufacturing principles., • Experience leading and developing associates., • Proven ability to obtain project deliverables and company metrics., • Ability to read, write, speak and understand English., • Must be at least 18 years of age., • Valid unrestricted driver's license with a clean driving record in the last 3 years., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Excellent written, verbal and interpersonal communication skills., • Ability to work with and through teams to achieve results, • Strong analysis and decision making ability., • Proficient computer skills., • Ability to work overtime and on weekends., • Ability to walk up to three miles each day., • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Must be able to lift up to 40 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels. Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories.

Job DescriptionJob ProfileJob Title: Scrum Master IILocation: Buffalo, NYHire Type: ContingentHourly: $40.92 - $68.19Work Model: HybridContact Email: No C2C, C2H, 1099, or Visa Sponsorship Available Nature & Scope:Positional OverviewAre you a dynamic and experienced Scrum Master looking to make a significant impact in a fast-paced and innovative environment? Our client is seeking a dedicated professional to provide servant-leadership and mentorship to multiple cross-functional agile teams through effective application of Agile principles and frameworks including Scrum, Kanban and Extreme Programming (XP). The ideal candidate will strengthen understanding of effective practices, theories and techniques to support continuous improvement, educates and coaches teams to create an environment that fosters self-organization, cross-functionality, collaboration, conflict resolution, transparency and continuous improvement, visualizes, communicates and radiates team information to keep their work and impediments visible to stakeholders. In this role, you'll have the opportunity to work with cutting-edge technologies, mentor talented teams, and contribute to the transformation of their development processes. If you thrive in a challenging yet rewarding setting and are passionate about Agile methodologies, we want to hear from you. Apply now!Role & Responsibility:Tasks That Will Lead To Your Success • Utilize a broad knowledge base of agile practices including user stories, retrospectives, story mapping,, • Acceptance Test-Driven Development (ATDD), Test-Driven Development (TDD), continuous integration, pairing, information radiators, etc., to help create high performing teams., • Encourage a continuous improvement culture for individuals within the team, constantly discovering better ways of working, through transparency, collaboration and retrospectives., • Facilitate meetings with the team for idea generation, sprint planning, daily stand-ups, backlog refinement, sprint reviews, retrospectives, problem-solving and alignment., • Help the team gain transparency into their workflow through appropriate use of information radiators., • Address blocking issues that are beyond the teams authority, or require support from other teams, so the team remains focused on achieving their goals., • Work with other Agile leaders to increase the effectiveness of the application of Agile within the organization., • of practice, conferences, meetups, reading and classroom training., • Design, implement, maintain and enhance internal controls to mitigate risk on an ongoing basis., • Identify risk-related issues needing escalation to management., • Maintain internal control standards, including timely implementation of internal and external audit points together with any issues raised by external regulators as applicable.Skills & Experience:Qualifications That Will Help You Thrive, • Bachelors degree and a minimum of 4 years experience as a member of an agile team, including a minimum of 2 years Scrum Master experience, or in lieu of a degree, a combined minimum of 8 years higher education and/or work experience, including a minimum of 4 years experience as a member of an agile team, including a minimum of 2 years Scrum Master experience., • Excellent JIRA/Confluence knowledge and skills, • Experience working on Infrastructure Projects, • Experience working with SAFe teams, • Prior experience fostering team self-organization and continuous improvement., • Knowledge of Agile and Lean principles and practices., • Experience developing/managing digital capabilities., • Understanding of Design Thinking principles., • Strong verbal and written communication skills., • Prior experience leading through influence

Job Description About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our car's are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: This is a supervisory position in an Inspection Center overseeing a team carrying out daily operations within a Carvana Inspection Center.. The Reconditioning Manager oversees all aspects of the vehicle reconditioning process and directs at least five leads and up to 70 front line associates in a lean manufacturing environment. This role will be responsible for maintaining a culture of continuous improvement and high associate engagement while meeting quality, production, and cost objectives. This position is not eligible for visa sponsorship. Salary range - $75,000-$90,000 annually What you'll be doing: • Oversee day-to-day operations within the Inspection Center., • Provide mentoring and accountability to direct reports and succession planning through appropriate coaching, leadership development and training, and performance management., • Participate in the development and execution of strategic plans, goals, and objectives, ensuring alignment with those of the company., • Ensure adherence to operating standards, systems, policies, procedures, and performance standards., • Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values., • Maintain supervisory staff by recruiting, selecting, orienting, and training employees., • Ensure progression path training and certification processes are consistently executed., • Train and mentor leads and associates by providing competency-based feedback., • Ensure adequate production capacity levels for each line and assist with production planning., • Ensure compliance with all health and safety and loss prevention guidelines., • Provide vision and guidance to the reconditioning team in meeting performance metrics., • Positively reinforce and engage the team regarding quality, production and cost objectives., • Participate in and lead problem solving and continuous improvement efforts. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. • 5 years of management experience either in automotive or a lean manufacturing environment., • Knowledge of lean manufacturing principles., • Experience leading and developing associates., • Proven ability to obtain project deliverables and company metrics., • Ability to read, write, speak and understand English., • Must be at least 18 years of age., • Valid unrestricted driver's license with a clean driving record in the last 3 years., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Excellent written, verbal and interpersonal communication skills., • Ability to work with and through teams to achieve results, • Strong analysis and decision making ability., • Proficient computer skills., • Ability to work overtime and on weekends., • Ability to walk up to three miles each day., • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Must be able to lift up to 40 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels. Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories.

Job Description Overview Are you ready to join a growing team? CTG is seeking to fill a Scrum Master II opening for our client. Location: Buffalo, NY Duration: 6 months Overview: Serve as a servant-leader and mentor to multiple cross-functional agile teams. Apply Scrum, Kanban, and XP practices to foster self-organization, collaboration, transparency, and continuous improvement. Visualize and communicate team progress and impediments to stakeholders. Primary Responsibilities: * Coach teams on agile practices: user stories, retrospectives, story mapping, ATDD, TDD, continuous integration, pairing, and information radiators. * Facilitate sprint planning, daily stand-ups, backlog refinement, reviews, retrospectives, and problem-solving. * Promote a culture of continuous improvement and team learning. * Remove blockers and escalate as needed to keep teams focused on goals. * Mentor junior Scrum Masters and collaborate with other Agile Leaders to enhance organizational agility. * Ensure compliance with risk, regulatory, and internal control standards. Scope of Responsibilities: Support multiple agile teams, ensuring alignment with organizational goals and effective agile adoption. Supervisory/Managerial Responsibilities: No direct reports; guides teams through influence, accountability, and ownership in an agile environment. Required Qualifications: * Expert in agile methodologies and team coaching * Strong communicator with initiative * Bachelor’s degree + 4 years agile team experience (2 years Scrum Master), or * 8 years combined higher education/work experience (4 years agile team, 2 years Scrum Master) Preferred Qualifications: * Knowledge in 2+ technology roles (Project Manager, UX, BA, Developer, Testing, Deployment) * Experience fostering self-organizing, high-performing teams * Agile/Lean principles expertise * Experience in digital capability development * Understanding of Design Thinking * Proven ability to lead through influence Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Tana Stilloe at . Kindly forward this to any other interested parties. Thank you!

Job DescriptionJob Title: Scrum Master IILocation: Buffalo, NYHire Type: ContingentPay Range: $40.92 - $68.19Work Type: Full-timeWork Model: HybridWork Schedule: Monday – Friday, 9am – 5pm Recruiter Contact: Brian Fesmire, & Scope:Positional OverviewAre you a dynamic and experienced Scrum Master looking to make a significant impact in a fast-paced and innovative environment? Our client is seeking a dedicated professional to provide servant-leadership and mentorship to multiple cross-functional agile teams through effective application of Agile principles and frameworks including Scrum, Kanban and Extreme Programming (XP). The ideal candidate will strengthen understanding of effective practices, theories and techniques to support continuous improvement, educates and coaches teams to create an environment that fosters self-organization, cross-functionality, collaboration, conflict resolution, transparency and continuous improvement, visualizes, communicates and radiates team information to keep their work and impediments visible to stakeholders. In this role, you'll have the opportunity to work with cutting-edge technologies, mentor talented teams, and contribute to the transformation of their development processes. If you thrive in a challenging yet rewarding setting and are passionate about Agile methodologies, we want to hear from you. Apply now!Role & Responsibility:Tasks That Will Lead to Your Success • Utilize a broad knowledge base of agile practices including user stories, retrospectives, story mapping,, • Acceptance Test-Driven Development (ATDD), Test-Driven Development (TDD), continuous integration, pairing, information radiators, etc., to help create high performing teams., • Encourage a continuous improvement culture for individuals within the team, constantly discovering better ways of working, through transparency, collaboration and retrospectives., • Facilitate meetings with the team for idea generation, sprint planning, daily stand-ups, backlog refinement, sprint reviews, retrospectives, problem-solving and alignment., • Help the team gain transparency into their workflow through appropriate use of information radiators., • Address blocking issues that are beyond the team’s authority, or require support from other teams, so the team remains focused on achieving their goals., • Work with other Agile leaders to increase the effectiveness of the application of Agile within the organization., • of practice, conferences, meetups, reading and classroom training., • Design, implement, maintain and enhance internal controls to mitigate risk on an ongoing basis., • Identify risk-related issues needing escalation to management., • Maintain internal control standards, including timely implementation of internal and external audit points together with any issues raised by external regulators as applicable.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor’s degree and a minimum of 4 years’ experience as a member of an agile team, including a minimum of 2 years Scrum Master experience, or in lieu of a degree, a combined minimum of 8 years higher education and/or work experience, including a minimum of 4 years’ experience as a member of an agile team, including a minimum of 2 years Scrum Master experience., • Excellent JIRA/Confluence knowledge and skills., • Experience working on Infrastructure Projects., • Experience working with SAFe teams., • Prior experience fostering team self-organization and continuous improvement., • Knowledge of Agile and Lean principles and practices., • Experience developing/managing digital capabilities., • Understanding of Design Thinking principles., • Strong verbal and written communication skills., • Prior experience leading through influence.

Job DescriptionBenefits: • Dental insurance, • Health insurance Key Responsibilities: Maintenance & Operations • Stock supplies, change trash receptacles in the warehouse and manage cardboard., • Ensure cleanliness and organization of warehouse floors, restrooms, breakrooms, and common areas., • Oversee preventive maintenance schedules to ensure the longevity and reliability of facility assets. Perform minor maintenance and repairs on facility infrastructure (lighting, plumbing, shelving, minor equipment, etc.), • Monitor and manage repair work orders, ensuring timely resolution of requests., • Maintain accurate records of inspections, repairs, and maintenance logs.Safety & Compliance, • Conduct regular safety inspections and audits to ensure compliance with OSHA and other relevant regulations., • Develop and maintain emergency response plans and safety protocols., • Coordinate and provide training for staff and ensure consistent adherence to company safety practices., • Address and mitigate hazards or unsafe conditions promptly.Administrative & Strategic Support, • Assist in budgeting for maintenance and operational expenditures., • Support capital improvement projects and space planning initiatives., • Strong interest in Facilities Management, Operational Efficiency , and Safety Measures., • 1+ years of experience in facility operations, building maintenance, or similar roles., • Working knowledge of building systems, maintenance processes, and safety regulations., • Strong organizational and project management skills., • Excellent communication and interpersonal skills., • Proficient in MS Office Suite products., • OSHA certification or similar safety training., • Experience with vendor and contract management., • Experience in Lean Management, Lean Six Sigma and/or ISO.Working Conditions:, • Primarily on-site role with some office-based responsibilities., • May require occasional lifting, climbing ladders, or working in non-climate-controlled environments., • Light Maintenance and Cleaning Responsibilities required.

What We Love About This Job: \n\n • Pay - $85k - $130k Depending on experience\n, • Unbelievable Benefits From Day 1 - unlimited PTO, onsite clinic with physicians, opticians, dieticians, physical therapists, pharmacy, etc\n, • Brand New Facility - 100k+ sqft state-of-the-art manufacturing space\n, • Leading, developing and coaching high-performing teams of employees.\n, • Leading through influence and partnering with cross-functional teams to develop and deliver tactical plans that achieve operation objectives.\n, • Effectively leading through organizational changes.\n, • A continuous improvement mindset, with a proven track record of enacting lean manufacturing strategies and implementing process/programming improvements.\n, • Excellent written and verbal communication skills.\n, • A strong ability to find opportunities to lean out processes including inspection equipment and inspection work holding techniques.\n, • Lead a team of direct reports that include inspection programmers.\n, • Be part of the manufacturing quality leadership team which will include the Inspection manager and the PQE manager.\n, • Collaborate with a cross-functional staff demonstrating Moog Culture and Values\n, • The ability to work tactically to complete the day to day activities and a focus on continuous improvement to set ourselves up for the future.\n, • Standardize programming techniques and inspection tools to reduce programming time.\n, • Facilitate resolution of all issues that may impact objectives for quality, cost, delivery and safety.\n, • Coordinate functions to ensure all required support services are effectively and efficiently planned, provided, and utilized.\n, • Champion and foster a culture of collaboration, results-based operational excellence, customer orientation, strong awareness of quality, process orientation and continuous improvement and safety.\n, • Recognize future inspection issues or constraints and develop a plan to avoid them before they become a problem.\n, • Ensure that relevant, accurate, and timely communication and reports are acquired from and delivered to stakeholders.\n \n EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran \n Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact us

Job Description GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.) This job may be eligible for relocation benefits. Onsite - This role is categorized as onsite. This means the successful candidate is expected to report to Tonawanda on a full-time basis. The Role: This career level Senior Manufacturing Engineer will lead and supervise Process and Controls Engineers and work directly with Production Leadership in designing, implementing and maintaining Lean Manufacturing systems. The main purpose of the Senior Manufacturing Engineer is to provide leadership, professional technical knowledge, results and behaviors in the environment of new and mature manufacturing systems to sustain, or increase safety, quality, throughput and efficiency. The ability to work in a dynamic, fast-paced manufacturing environment is critical to succeed in this role. What You'll Do (Responsibilities): \n • Lead and Manage a team of trained Mechanical and Electrical Engineers\n, • Support and adhere to corporate and plant safety policies\n, • Support the day-to-day production needs on the production floor by maintaining solid relationships with the Production and Maintenance teams\n, • Provides technical support for manufacturing operations\n, • Engineer, Design, Build, Implement and Maintain machinery, tools & equipment\n, • Create and Maintain Process Flow Diagrams, Control Plans and PFMEAs\n, • Manage significant downtime events by providing technical guidance and support\n, • Design work operations that meet safety, quality, and efficiency requirements with high integrity\n, • Drive Continuous Improvement efforts in assigned area through the elimination of waste\n, • Evaluate bottleneck areas and support throughput and productivity improvements in assigned area\n, • Support change management projects by developing and participating in production trials\n, • Reduce total cost by improving productivity metrics related to equipment uptime, cycle time and quality\n, • Participate in lean manufacturing through implementation of GM's Global Manufacturing System\n, • Become a coach and teacher of lean manufacturing principles to the production floor team members and other Engineers\n, • Support implementation and training for standardized work development.\n\n Your Skills & Abilities (Required Qualifications): \n • BS in Mechanical/Manufacturing Engineering/Electrical Engineering or equivalent experience.\n, • 5+ years of Assembly or Machining process development experience in Manufacturing or Manufacturing Engineering discipline with plant floor experience.\n, • Solid understanding of high-volume manufacturing & assembly processes.\n, • Experience in troubleshooting equipment (Problem Solving/Debug).\n, • Understanding of Pneumatic, Mechanical, and Control drawings.\n, • Understanding / Application of Part Locating / Mechanics / Machine Design/PLC Controls architecture.\n, • Understanding of Theory of Constraints.\n, • Experience with Time Cycle Diagrams and Man/Machine Charts.\n, • Practical Problem-Solving Skills (Formal Training/Practical Application).\n, • Ability and willingness to work any shift.\n, • Ability and willingness to work non-standard hours outside of normal shift (early morning, late evenings and some weekends and holidays) to support installation and maintenance of equipment.\n, • \nThe selected candidate will be required to travel up to 25% for this role.\n\n What Can Give You a Competitive Edge (Preferred Qualifications): \n • Demonstrated understanding of plant floor and design for manufacturability.\n, • ME assignments with successful individual achievements or strong team-based achievements.\n, • Knowledge of AutoCAD, Team Center, Microsoft Project, Simulation.\n, • Competency in GD&T.\n, • Formal Statistical problem-solving training.\n, • Experience with PFMEAs / Simulation / Fastening Equipment / Servo Presses / Sealing Dispensers / Cameras / Error Proofing Devices.\n, • Experience in process development, specification, procurement, and qualification of equipment & tooling.\n, • Experience in documentation of Standardized Work procedures.\n, • Ability to adapt to different interpersonal styles and communication methods.\n, • Previous experience with project management and time management.\n, • Previous experience working in a Union Environment or Bargaining Unit.\n, • Knowledge of or experience with Bill of Equipment (BOE), Bill of Process (BOP), Bill of Sediment Elimination (BOSE) and Bill of Operations (BOO).\n, • Demonstrated interest and ability to learn and apply agile methodologies.\n, • Ability to use computer, interpret mechanical and electrical drawings and learn new systems.\n, • Experience in implementation of Lean Manufacturing concepts.\n, • Experience working in manufacturing with a background in Continuous Improvement.\n, • Self-motivated individual with Continuous Improvement focus.\n, • Appropriate interpersonal styles and communication methods to work effectively with business partners to meet mutual goals required.\n, • Demonstrated ability to manage multiple and complex projects with a high level of autonomy and accountability for results.\n\n Compensation: \n • The expected base compensation for this role is: 122,000.00 - 168,800.00 USD Annual. Actual base compensation within the identified range will vary based on factors relevant to the position.\n, • \nBonus Potential: An incentive pay program offers payouts based on company performance, job level, and individual performance.\n\n Benefits: Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, emailus or call us at 800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Description Position Summary: GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities: • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require occasional travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft is looking for a Manufacturing Engineer/CNC Programmer to join them. You will report to the Manufacturing Engineering Technical Lead and will have an onsite work schedule in East Aurora, NY As a Manufacturing Engineer/CNC Programmer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with high precision parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Manufacturing Engineer/CNC Programmer, you will: • Create detailed operation sheets and CNC programs to produce high-precision machined parts and sub-assemblies.\n, • Define manufacturing sequences, tooling, gauging, and machine requirements to streamline production.\n, • Work closely with engineering, quality, production, and vendors to resolve issues and enhance manufacturability.\n, • Be hands-on in the production environment, assisting with program prove-outs and troubleshooting.\n, • Recommend and implement process enhancements, tooling upgrades, and design modifications.\n, • Assist in estimating costs and timelines for new proposals and tooling development.\n To be considered for this role, typically you'll bring: • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience\n, • 3+ CNC programming experience using CAD/CAM software.\n, • Strong knowledge of process engineering from raw material to finished product.\n, • Hands-on experience with machine setup and operation.\n, • Excellent communication and documentation skills to work effectively across departments.\n It'd be great if you also had: • A degree in Mechanical, Manufacturing, or Industrial Engineering\n, • Background in the aerospace industry\n, • Experience with machine automation integration\n, • Skills in inspection of machined parts\n, • Hands-on experience machining stainless steel, titanium, and aluminum\n, • Proficiency in CNC Programming using Siemens NX\n, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n Salary Range Transparency: Buffalo, NY $70,000.00-$115,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.

The Operations Supervisor will provide manufacturing leadership to deliver a world-class operation.Operations Supervisors lead, motivate, and develop employees to achieve outstanding manufacturing results, while leveraging Continuous Improvement (Lean/TPM) tools, improving individual skills, and enh

Job Description Job Title: Project Manager Location: Buffalo, NY Department: Manufacturing Operations Reports To: Business Unit Director Position Overview GTI Fabrication is seeking an experienced Manufacturing Project Manager to support the day-to-day execution of manufacturing projects. In this role, you’ll be responsible for ensuring project timelines, budgets, and deliverables stay on track through coordination with cross-functional teams. The Project Manager serves as the internal point person for executing predefined plans, communicating with stakeholders, and resolving issues during the production lifecycle. This role is ideal for professionals with 5–8 years of experience in manufacturing or production project management, with strong communication, scheduling, and analytical skills. Key ResponsibilitiesProject Execution & Coordination * Drive daily execution of active projects, ensuring alignment with predefined scope, schedule, and budget * Coordinate with Engineering, Fabrication, Quality, and Logistics teams to maintain workflow and address execution gaps * Track production progress and proactively identify risks or delays; escalate issues when needed * Maintain and update detailed project schedules, task lists, and work breakdown structures Client Communication * Serve as the primary point of contact for customers during the execution phase * Provide timely project updates, coordinate review meetings, and manage escalations professionally * Ensure clear documentation of delivery timelines, responsibilities, and contract terms * Verify that all client-supplied materials, shipping expectations, and documentation are accounted for and fulfilled Documentation & Reporting * Maintain accurate project documentation including status reports, meeting notes, and change orders * Collaborate with Business Unit Managers to ensure scope and deliverables align with client contracts * Monitor and report on performance metrics such as timeline adherence, throughput, and issue resolution * Support continuous improvement by documenting lessons learned and project outcomes Required Qualifications * 5–8 years of experience in project management within a manufacturing or production environment * Strong knowledge of project coordination, scheduling, and execution * Excellent communication and stakeholder management skills * Proficiency with Microsoft Excel and project tracking tools such as Smartsheet or MS Project * Ability to manage multiple active projects in a fast-paced, production-driven setting Preferred Qualifications * Familiarity with metal fabrication, modular construction, or containerized structures * Experience with ERP systems (NetSuite preferred) * Exposure to Power BI or Tableau for dashboard and status reporting * Lean manufacturing or Six Sigma certification a plus About GTI Fabrication GTI Fabrication designs and manufactures custom modular solutions for defense, energy, and industrial clients. Our mission-critical products range from ballistic metal enclosures to expeditionary structures, with every project engineered and built in-house at our Goodyear, AZ facility. We offer a fast-paced environment where innovation and execution go hand-in-hand.

Job Description Lead Manufacturing Project Manager Location: Buffalo, NY (On-Site) Department: Manufacturing Operations Reports To: Business Unit Director Direct Reports: 5–6 Project Managers and Senior Project Managers About GTI Fabrication GTI Fabrication designs and manufactures complex modular systems, structural steel assemblies, and containerized solutions for defense, energy, and industrial customers. With a rapidly expanding manufacturing footprint, GTI delivers highly engineered, build-to-order products that require precise coordination and world-class execution from concept to shipment. As GTI’s project portfolio grows, we are investing in senior leadership roles capable of driving consistent performance across multiple high-stakes customer programs. Position Overview The Lead Manufacturing Project Manager is a senior-level leader responsible for managing a team of Project Managers and Senior PMs, ensuring consistent and disciplined execution across a portfolio of manufacturing programs. This role combines strategic oversight, operational leadership, and hands-on project governance. The Lead PM ensures project teams deliver on scope, schedule, budget, risk mitigation, customer communication, and manufacturing readiness — while driving continuous improvement across GTI’s project management function. This role is suited for a highly experienced project leader who thrives in fast-paced industrial environments and excels at leading other project managers. Key Responsibilities Leadership & People Management * Directly lead, mentor, and develop a team of 5–6 Project Managers and Senior Project Managers. * Define performance expectations, set goals, conduct reviews, and build a high-performance PM team. * Oversee project assignments, capacity planning, and workload distribution. * Coach PMs on customer management, production alignment, communication, and escalation techniques. * Establish standardized processes, templates, governance routines, and execution methodologies across the PM organization. Program Governance & Execution Oversight * Provide executive-level oversight for all active manufacturing programs within the business unit. * Monitor project performance across timeline adherence, cost variance, production readiness, and deliverable quality. * Lead executive-level reviews and enforce disciplined adherence to GTI’s PM framework. * Identify systemic risks or resource constraints and escalate to leadership with recommended solutions. * Partner with Production, Engineering, Quality, Supply Chain, and Business Unit Directors to maintain smooth execution. Customer Leadership & Communication * Serve as the senior escalation point for key customers during project execution. * Oversee PM-led customer communications, ensuring accuracy, professionalism, and alignment with contract expectations. * Participate in major customer reviews, factory acceptance tests (FAT), and milestone approvals as needed. * Ensure all customer requirements, documentation, and deliverables are met on schedule. Reporting, Metrics & Continuous Improvement * Build and oversee portfolio-level dashboards, schedule trackers, and risk logs. * Review PM-submitted reports for accuracy and early risk identification. * Track KPIs such as: * Schedule adherence * Throughput & bottlenecks * Budget vs. actuals * Change order impact * Customer satisfaction * Lead “lessons learned” and drive cross-functional improvements to engineering, production, documentation, and scheduling processes. Required Qualifications * 8–12 years of project management experience in manufacturing, fabrication, industrial equipment, or production environments. * 2–5 years of formal leadership experience managing Project Managers or Senior PMs. * Strong grasp of: * Production flow * Fabrication and assembly processes * Material dependencies and scheduling * Manufacturing change management * Demonstrated ability to lead multiple high-complexity projects simultaneously. * Advanced communication, negotiation, and stakeholder management skills. * Experience with MS Project, Smartsheet, or other advanced scheduling tools. * Strong data orientation — capable of reviewing dashboards and KPIs to drive action. Preferred Qualifications * Background in metal fabrication, modular construction, welding operations, or containerized structures. * ERP experience (NetSuite preferred). * Power BI or Tableau reporting experience. * PMP, Lean Six Sigma, or equivalent certification. * Experience scaling a PM team or installing a project governance framework. Why Join GTI Fabrication * Lead an expanding project management organization with high visibility across GTI’s executive team. * Influence strategic decision-making tied to production throughput, delivery performance, and customer success. * Work in a fast-growing, highly technical industrial manufacturing environment. * Competitive compensation and leadership-track advancement opportunities.

Job DescriptionSummary:A well-established general contractor is seeking an experienced Project Manager / Superintendent to lead upcoming phased commercial renovation projects. This position combines field leadership with project management, requiring a balance between hands-on supervision and detailed administrative oversight. The ideal candidate is organized, technically savvy, and experienced in managing fast-paced, multi-phase construction environments. Key Responsibilities: * Oversee all onsite construction activities including scheduling, logistics, trade coordination, and progress tracking * Manage daily reports, RFIs, submittals, and change management using Procore * Develop and maintain project schedules in MS Project, implementing Lean Construction principles through weekly huddles and work plans * Track trade productivity and progress, ensuring accurate adjustments week to week * Conduct site meetings, prepare minutes, and manage communication across field and office teams * Ensure safety, cleanliness, and operational coordination within active facilities * Review submittals and specifications, ensuring quality control and design compliance * Collaborate with the project team to plan shutdowns, phasing, and material delivery sequencing * Lead subcontractors and site staff with professionalism and accountability Qualifications: * 7+ years of experience as a Superintendent or Project Manager in commercial construction * Strong background in MEP coordination, renovation, or facility upgrade projects * Proficiency with Procore, MS Project, and digital documentation tools * Experience running Lean Construction workflows and short-interval planning * Excellent communication and leadership skills with the ability to manage multiple stakeholders * Technically inclined and comfortable managing both field execution and project documentation What’s Offered: * Opportunity to lead complex multi-phase commercial projects with long-term regional work * Company vehicle or allowance, mobile technology package (phone, tablet, etc.) * Strong healthcare, PTO, and benefit programs * Collaborative culture focused on accountability, teamwork, and field leadership

Job Description At Danforth, we are committed to fostering education and growth by offering an immersive learning experience for students eager to explore and gain practical experience in project management within the mechanical contracting industry. Kick-Start Your Career Are you ready to embark on an exciting journey in mechanical contracting? As a Construction Management Intern at Danforth, you will be part of our Project Management group and report directly to an assigned Project Manager/Mentor. You’ll gain hands-on exposure to real projects while learning and applying JW Danforth Standard Operating Procedures outlined in our Project Management Manual. Your responsibilities will include supporting the Project Team in the execution of project tasks and milestones—ranging from pre-construction planning and document control to installation status monitoring and labor productivity measurement. Program Highlights As an intern, you will: • Support Foremen and Field Teams by coordinating tools, materials, equipment, and schedules., • Gain exposure to Lean construction principles and learn how time, materials, and milestones impact project success., • Collaborate with Shops on fabrication opportunities and improve scheduling/planning processes., • Identify project inefficiencies and assist with performance tracking., • Participate in project, client, and internal process activities (Procurement, CAD, Document Control, Change Proposals, Closeout). Experience & Competencies • Willingness and ability to learn., • Strong organizational skills., • Integrity, punctuality, and enthusiasm to represent Danforth to our customers., • Excellent communication and collaboration skills., • Enrollment in an accredited 2- or 4-year Construction Management degree program. Why Join Us? This internship is designed to empower you with the knowledge, skills, and confidence to thrive in the mechanical contracting field. By working on meaningful projects and gaining hands-on experience, you’ll build a solid foundation for your future career. If you’re ready to take the first step toward a rewarding career, we’d love to welcome you to our team! John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

As a key member of the executive team, the CFO drives INFUSE's financial strategy, performance, and scalability. Lead all financial operations: forecasting, reporting, treasury, risk, tax, and compliance. Ensure lean, transparent financial processes that support rapid growth.

Be a licensed attorney, CPA, Project Management Professional, Six Sigma, Lean or equivalent certification or a certified member of the Institute for Professionals in Taxation or have the ability to obtain one of these designations. In addition, our Total Rewards package includes medical and dental c

Job Description Join Our Innovative, Independent Medical Practice as a Healthcare Marketing and Communication Manager! Our Healthcare Marketing and Communication Manager is responsible for helping to grow the practice by developing and implementing strategic marcom plans for highly competitive healthcare service lines. The ideal candidate has successful business-to-consumer marketing experience; excels at working independently and “rolling up their sleeves” to get the job done; and has experience managing a full- service marketing agency relationship. We are looking for someone to who can develop into, or immediately join, our senior leadership team responsible for growth and reputation management. Position reports to the Chief Executive Office and Chief Operating Officer. Duties and Responsibilities Strategy and Plans: Develop and execute comprehensive marketing and communication strategies and plans to highly targeted audiences to grow the physician practice across priority service lines. Agency Interaction and Management: Articulate physician/leadership vision and business goals and communicate them effectively to our agency partner. Collaborate with and manage agency account/project manager and creative team to ensure alignment and successful execution of campaigns; provide continuous reporting and feedback to both the agency and practice leadership. Social Media: Execute social media strategies, create daily content and monitor channels to increase brand awareness, engagement and lead generation on targeted social media platforms. Email Marketing: Develop and implement email marketing and nurture campaigns, including segmentation, automation and A/B testing. Events: Organize promotional events and coordinate day-of deliverables and staffing as needed. Public and Media Relations: Oversee public and media relations strategies and campaigns that lean into both traditional and non-traditional media (podcasts, short-form video, etc.) to enhance physician’s reputation as an international medical thought leader and first-in-class integrative medicine and concierge medicine provider. Internal Communication and Staff Engagement: Ensure practice team members are excellent brand ambassadors through development of talking points, marketing materials and training sessions. Support internal communication by promoting staff achievement, success stories, events and company culture. Measurement and Reporting: Develop, track and report key performance indicators (KPIs) to measure the success of marketing efforts for continuous improvement. Experience and Knowledge • A minimum of 3-5 years of retail marketing and communication experience o Ideal candidate will have marketing experience in a competitive healthcare industry • Demonstrated experience in marcom strategy, planning and implementation, • Demonstrated experience interacting with a full-service marketing agency o Ideal candidate will have managed an agency relationship • Experience with integrated marketing and communication campaigns including targeted digital marketing campaigns; organic and paid social media campaigns; public and media relations; website design best practices; and analytics and reporting o Ideal candidate will have experience with paid influencers, thought leader development, and developing physician referral relationships o Ideal candidate will display in-depth knowledge in CRM, loyalty, digital marketing and social media Education, Qualifications and Skills • Bachelor's degree in marketing, communication or related field of study or equivalent work experience, • Proficient computer and technology skills: Microsoft business suite (e.g. Word, Excel, PowerPoint); social media planning and development; project management (e.g., Trello, Basecamp, etc.); basic design (e.g., Canva, InDesign); AI content tools (e.g.,ChatGPT), • Effective, demonstrated written and verbal communication skills, • Professional appearance and comfortable public speaking at in-person marketing events, • Critical thinking skills, and ability to make recommendations to improve any aspect of the team process, practices and tools Job Type, Compensation and Benefits This is a full-time and on-site position (hybrid schedule may be an option in the future); some evening and weekend events and travel may occasionally be required. Compensation: $75,000 - $90,000 per year, plus annual bonus based on achievement of SMART goals. Benefits include: Medical/Dental/Vision, Paid Time Off, Paid Sick Leave, 7+ Paid Holidays, 401k w/ Safe Harbor Contribution, Various EE Discounts.

Designs and builds company specific enterprise application systems and technology expertise across multiple disciplines.Applies and promotes key principles (e.Considers business problems “end-to-end”: including people, process, and technology, both within and outside the enterprise, as part of a

Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities.From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world.Beyond great food, our customers also gain

Certifications related to planning and lean manufacturing a plus.

A continuous improvement mindset, with a proven track record of enacting lean manufacturing strategies and implementing process/programming improvements.

Moog is a performance culture that empowers people to achieve great things.Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing.For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of l

Engineering Manager For API Services.As an Engineering Manager for API Services, you will lead a high-performing team responsible for delivering robust, scalable APIs and maintaining a well-governed API ecosystem.This role combines leadership of feature delivery teams and operations teams to ensure

Staff Engineering Manager - Product Engineering.Moog is a performance culture that empowers people to achieve great things.Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing.For you, working with us can mean deeper job satisf

Analyze, design and develop tests and test-automation suites.Design, create and develop a processing platform using various configuration management technologies.Test software development methodology in an agile environment.Provide ongoing maintenance, support and enhancements in existing systems an

Lactalis USA is currently seeking candidates to join our USA Engineering, Energy, and Environmental team in Buffalo, NY.Lactalis, the world leader in dairy, is a family-owned business with more than 85,000 pragmatic and ambitious professionals worldwide, committed to nurturing the future by providin

This position offers the opportunity to work with leading Investor Agencies (Fannie Mae, Freddie Mac, HUD, and conduit loans), assess portfolio quality, identify areas of risk, evaluate long-term viability and performance, and proactively mitigate potential loss.If you are a motivated professional l

We are seeking a motivated and detail-oriented Engineer to join our team.If you are passionate about data analysis, problem-solving, and continuous improvement, we want to hear from you!.Conduct thorough investigations related to project or product issues Analyze data to identify trends, anomalies,

Advance your career with the Stark Tech team.We'll shape your future together!.Stark Tech is a total optimization provider of facilities and energy solutions.Stark Tech leads the market in providing cutting-edge facilities and energy solutions.We integrate systems, offer energy-efficient equipment a

Build iconic structures that shape skylines.At Enclos Tensile Structures, we design, engineer, fabricate, and install custom tensile structures that define skylines and transform public spaces - from stadiums to transportation hubs and beyond.Our work blends architectural vision with advanced struct