Ship jobs in Jacksonville, Florida - Page 2Create job alerts

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description COMPANY: Canoe Intelligence WEBSITE: TITLE: Product Owner LOCATION: Hybrid in New York or Jacksonville SALARY: $95,000 - $125,000 (based on NYC, will be adjusted for geo) The Role: We’re looking for a high-velocity learner who wants to be part of something great. As a Product Owner, you’ll be dropped into the middle of a fast-moving product team and expected to rise quickly. You’ll help us ship features, write requirements, and keep delivery unblocked—learning everything about how great products get built. You don't need to be an expert on Product, but you will need to be someone who moves quickly and wants the opportunity to prove themselves in a Product career. What You’ll Do: • Own delivery end-to-end for product initiatives., • Manage and refine the backlog, write clear and testable user stories, and align with engineering daily., • Write detailed specs that remove ambiguity and drive velocity., • Drive rituals (planning, standup, retro, QA cycles, release readiness) and make them matter., • Work with PMs to understand the strategy and bring it to life on the ground. What We’re Looking For: • Demonstrable ability to drive results across initiatives and cross-functional teams., • Hustle. Attitude. Energy. You’re the one everyone wants on their project., • Lightning-fast learner with serious curiosity and coachability., • Incredible written communication. You don’t write essays—you write instruction manuals., • Prior experience in product delivery, project ownership, or technical product roles is a plus., • Familiarity with agile frameworks, but more importantly, a mindset of ownership and accountability., • Experience with tools like JIRA, Confluence and Figma., • New York or Jacksonville based. Hungry to be in the room where it happens. What You’ll Get: • Medical, dental, vision benefits, • Flexible PTO, • 401(k), • Flexible work from home policy, • Home office stipend, • Employee Assistance Program, • Gym/Wifi reimbursement, • Education assistance, • Client First —> Listen, and deliver client-centric solutions, • Be An Owner —> Take initiative, improve situations, drive positive outcomes, • Excellence —> Always set the highest standard for yourself and others Canoe is reimagining alternative investment data processes for hundreds of leading institutional investors, capital allocators, asset servicing firms and wealth managers. By combining industry expertise with the most sophisticated data capture technologies, Canoe’s technology automates the highly-frustrating, time-consuming, and costly manual workflows related to alternative investment document and data management, extraction and delivery. With Canoe, clients can refocus capital and human resources on business performance and growth, increase efficiency, and gain deeper access to their data. Canoe’s AI-driven platform was developed in 2013 for Portage Partners LLC, a private investment firm. Canoe is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Actively ship production code to the web products, • Work closely with your dedicated product team, • Participate in product discussions to shape the product roadmap, • Experience. You've built and ship products that have scaled to thousands or millions of users, • Customer obsession. You are passionate about the field and have the desire to build high quality product that serves customer needs, • Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs, • A fast-growing environment where you can help shape the culture, • An entrepreneurial crew that supports risk, intuition, and hustle, • A hands-off approach so you can focus and do your best work, • The opportunity to make an impact in a transformative industry Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Opportunity to lead key engineering and product decisions, • Actively shipping production code for the Speechify iOS app, • Work within a dedicated product team, • Participate in product discussions to shape the product roadmap, • Experience. You've worked on products that scaled to a large user base, • Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product, • Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience, • Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction, • Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Swift Programming Language, • SwiftUI experience, • Experience in Multithreading Programming, • Working with CI/CD infrastructure, • Experience with Fastlane, • SOLID principles, the ability to write every single class according to SOLID, • A fast-growing environment where you can help shape the company and product, • An entrepreneurial crew that supports risk, intuition, and hustle, • The opportunity to make a big impact in a transformative industry, • A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture, • Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives, • Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Napa Auto Parts - [Material Handler / Freight Handler] As a Stockroom Associate at Napa Auto Parts, you'll: Expedite incoming and outgoing freight in the warehouse; Receive, stock, pull, stage, load and ship freight; Process inventory and maximize warehouse space usage; Check, verify, load, stock an

Job Description What's it like working for an innovative company that takes on some of the world's most important challenges? Rewarding. At BAE Systems we protect those who protect us. Our Maritime Solutions Jacksonville facility has multiple opportunities for fabrication welders with variable levels of experience.\n • The primary tasks include the welding of newly fabricated structural members and plating \n, • Other tasks include the welding of outfitting items such as electrical cableways, brackets, watertight hatches/doors and many other components in accordance with Module fabrication .\n, • All tasks require strict adherence to the company's safety, health, and environmental policies and procedures.\n, • A structural welder should be able to read and utilize welding procedures and welding symbols.\n, • A structural welder should be able to safely and efficiently use an oxy-fuel torch to apply pre-heat to materials prior to welding.\n, • A structural welder should be able to safely and efficiently use air carbon arc gouging equipment to gouge welds. \n, • A structural welder should be able to safely and efficiently use electric and pneumatic grinders to prepare materials for welding, as well as to clean and contour finished welds. \n, • A structural welder should be able to use measuring tools and gauges to verify dimensions of weld joints in accordance with approved joint designs. \n, • A structural welder should be able to use weld gauges to verify weld size and quality in accordance with specifications. \n, • A structural welder should be able to utilize ceramic backing in the flat, horizontal, and vertical positions with the semi-automatic welding processes.\n, • A structural welder should be able to pass groove-weld qualification tests in all positions for multiple materials and processes, such as Flux-Cored Arc Welding (FCAW) and Shielded Metal Arc Welding (SMAW) of high strength steel and stainless steel, as well as Gas Metal Arc Welding (GMAW-Pulse) of aluminum and steel .\n, • Must be an upcoming graduate or recent graduate of ATDM.\n, • Demonstrate the ability to pass the following including FCAW with ceramic tape, single Vee and open butt in 2G and 3G positions.\n, • Have a basic understanding of the Military standard 1688 and 1689 for surface and submarine fabrication.\n Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair...just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Essential Function This job consists of one or more duties involving the efficient picking and packing, handling and the timely movement of stock in and out of pack/pick locations. Primary goal is to move product safely with minimal damage while maximizing productivity. Detailed Standard Operating Procedures exist for tasks performed by this job in the following areas: Order Pulling, Packing Orders, Stocking, Special Operations – Deal Breaks & RGA processing. Primary Duties: • Provide clear, concise statements using action verbs to describe what is done, with or for whom the action is taken and the purpose or outcome to be achieved. Responsibilities should be listed in order of percentage of time spent performing the actual duty., • May complete the activity of Radio Frequency or paper-based picking which requires the use of different types of equipment to complete this process, including obtaining and transferring product from various locations throughout the distribution center., • May package and ship products to either the stores or salons and may be required to work within the Hospital QA Lane, Packing Lane, Store Sorting, UPS Line, as well as Wrap Stage and loading., • May complete the activity of Special Operations which includes tasks such as the deal break process or breaking down product deal packages into their components., • May be responsible for the RGA process in Special Operations which involves the processing of product returns through the distribution center. Inspects the returned product for piece count and damage and compares it to the accompanying paperwork., • May stock products/items using different types of equipment to complete the process. May include the “picking and placing” of product from various locations throughout the distribution center., • Ensures all areas of work are done accurately to ensure optimal customer service., • Maintains a safe work environment, performs job functions in a safe manner, and reports any potential job hazards to management, including maintaining good housekeeping practices., • Maintains productivity related to standards based on assigned task., • High school diploma or equivalent preferred, • At least 2 years in a distribution/warehouse environment or equivalent work experience, • Must know and be able to perform Picker/Packer 1 job, • Basic computer skills, • Verbal and written communication skills, • Ability to work in a fast paced environment with the capability to adjust to change and interruptions, • Must be able to maintain neat and accurate records, • Must be skilled in basic arithmetic and have ability to read and interpret orders, product description, and/or numbers in the English language

Job Description BAE Systems is seeking an Accuracy Control Metrology Technician to use a variety of 3-dimensional and standard optic tooling equipment to support the critical alignment of ships components and pairing major modules. The technician will be responsible for determining the proper tooling for the job, move the tooling throughout the shipyard to various job sites, complete the measurements assigned on procedural data sheets, and utilize a high degree of accuracy to complete the required tasks. The data collected by the technician during the survey, will transfer the work package over to the Accuracy Control Engineer and assist as needed with analysis and data review. Required Education, Experience, & Skills \n • High School Diploma\n, • Profound understanding of quality and accuracy control\n, • Strong background in construction, fabrication, and alignment \n, • Calculate and understand units of measure in fraction and decimal form\n, • Ability to read and use a scale, tape measure, and level\n, • Read and interpret drawings, plans, tolerances, and construction diagrams\n, • Ability to effectively communicate with management and employees at all levels\n, • Self-starter and motivated to learn new technology\n, • Associates/ bachelor's degree or 5+ years of job experience related to surveying\n, • Strong understanding of coordinate systems\n, • Background in shipbuilding, construction, or manufacturing environments\n, • Comprehend construction tolerance block and how requirements apply during build sequence\n, • Optical level, total station, and laser tracker set up, operation, and recording of measurements\n, • Involvement with Spatial Analyzer, CAMM2, PolyWorks software\n Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair...just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

GEODIS - JobID: 45CBF7C5213B28376037375BD31FDBAC [Material Handler / Freight Handler] As an Operator at GEODIS, you'll: Read production schedule, customer order, work order, shipping order, or requisition to determine items to be moved, gathered, and/or distributed; Pull and prepare product for ship

Job DescriptionSalary: $22.61 - $29.29/hr E-Verify Poster Right to Work Poster Outside Machinist Handyperson Summary: • Demonstrate knowledge of shipyard safety best practices (i.e. job hazard analysis (JHA), fire prevention, electrical safety, tool safety, fall protection, hazardous waste operations, confined space entry, hot work operations, etc.)., • Demonstrate the ability to operate and maintain a sand blaster, parts washer, steam cleaner and paint booth., • Demonstrate knowledge of basic math and measuring (i.e. addition, subtraction, fractions, decimals, how to read a tape measure, etc.), • Ability to properly care for and use basic tools (e.g. flashlight, tape measure, pliers, feeler gauge, Allen wrench, crescent wrench, combination wrench, socket wrench, Ford wrench, pipe wrench, ball-peen hammer, soft hammer, Phillips and flat head screwdriver)., • Knowledgeable of how to find compartments of the ship by space number, and know port from starboard, and forward from aft., • Possess a basic assortment of hand tools required as a Handyperson and know how to use them., • Follow instructions exactly as given., • Basic knowledge of ship building procedures., • Work well with others and be able to handle constructive criticism from a mentor., • Work safely and know the safety rules and regulations as they apply to you., • Know the company Quality Policy and be able to state it when required., • Must want to excel in the shipyard., • Blank and tag equipment in accordance with NAVSEA Standard Items., • Package, label and store material in an organized fashion., • Demonstrate knowledge of Naval Ship Work Authorization Form (WAF) procedures., • Possess general knowledge of 4E specifications, references and drawings (including category I and II NAVSEA Standard Items)., • Must regularly lift and/or move up to 50 lbs. and seek assistance with weights over 50 lbs., • Able to withstand environmental factors such as:, • Outside weather conditions, • High, precarious places, • Exposed to fumes and airborne particles, • Very loud noise level, • Occasionally perform other physical activities as required, such as:, • Stooping, • Bending, • Squatting, • Climbing (including but not limited to vertical and incline ladders, masts, and kingposts), • Crawling (including but not limited to through scuttles, manhole covers, tanks, and voids), • Must be able to obtain a government facility security pass/DBIDS., • Must be able to pass Drug Screening, Work Ability Screening., • Must be 18 years of age or older to apply., • Some college, trade school, or technical training preferred.

Job Description Engineering Technician I – V – NSWCPD Code 316 Salary Grade/Level/Family/Range Jacksonville / Mayport Technician I: $17.66/hour Technician II: $19.82/hour Technician III: $22.17/hour Technician IV: $27.46/hour Technician V: $33.59/hour Up to an additional $5.09/hour health & welfare, depending on benefit enrollment Kings Bay, GA Technician I: $17.14/hour Technician II: $19.24/hour Technician III: $21.52/hour Technician IV: $26.66/hour Technician V: $32.61/hour Up to an additional $5.09/hour health & welfare, depending on benefit enrollment Company Overview: KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility Position Summary / Objective: The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 316, which is responsible for the Planned Maintenance System (PMS)/Class Maintenance Plan (CMP), Reliability Centered Maintenance (RCM) and PMS Service Request (PSRs), review of New Construction PMS Contract Deliverables, and PMS update and development for in-service, modernization, new construction, and land-based engineering test site maintenance documents. Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Review Engineering and technical documentation to determine compliance with engineering standards, technical accuracy, and adequacy in relation to functional, operational, and technical requirements., • Perform engineering analysis, reviews, studies and provide recommendations related to the development, interoperability, integration, operations, and use of Maintenance Standards during system, subsystem, and equipment maintenance., • Collaborate with the customer and various organizations, offering in-depth research and data analysis to improve engineering documentation and provide informed technical feedback., • Assist in reviewing, tracking, and analyzing Fleet feedback (e.g., Maintenance Index Pages (MIPs), Maintenance Requirement Cards (MRCs), LARS, TFBRs, and LARs) related to machinery systems., • Support engineering teams in updating PMS documentation based on in-service reliability and maintenance data., • Provide technical input for the development and modification of Integrated Logistics Support (ILS) products, including technical manuals, maintenance plans, and provisioning documentation., • Use Navy databases and tracking tools (e.g., CDMD-OA, SKED, OMMS-NG, TDMIS) to retrieve and validate logistics and maintenance data., • Participate in Failure Review Boards, Technical Feedback Reviews, and support the analysis of failure trends., • Draft reports and documentation related to PMS changes, logistics deficiencies, or process improvements., • Collaborate with engineers, logisticians, and program office staff to address shipboard maintenance and support issues., • Provide administrative functions for program efforts in special situations including, but not limited to meetings, and preparing/maintaining history files. Required education and experience: • High School Diploma or Accredited GED equivalent., • Bachelor of Science (or higher) in Mechanical Engineering may be substituted for relevant experience requirement., • Required years of professional experience as an Engineering Technician:, • Engineering Technician I - Entry Level, • Engineering Technician II - 1 year, • Engineering Technician III - 3 years, • Engineering Technician IV - 7 years Preferred education and experience: • Bachelor of Science (or higher) in Mechanical Engineering., • Familiarity with Maintenance Standards and Hull, Mechanical, and Electrical (HM&E) systems is a plus., • Current or recent shipyard and maintenance availability experience and be familiar with availability work packages and tracking metrics., • Experience as a PQS Worker, Work Center Supervisor, or 3M Coordinator within the Navy’s maintenance system., • Familiarity with the Navy’s PMS and ILS concepts., • Familiarity with engineering documentation standards and quality assurance practices., • Experience with Ship Maintenance and Logistics databases (e.g., SKED, OMMS-NG, TDMIS, CDMD-OA)., • Knowledge of Configuration Management (CM) and life-cycle support concepts., • Technical writing experience, particularly with maintenance or logistics documentation., • Adept at learning new systems and terminology. Competencies: • Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software., • Excellent verbal and written communication skills, as well as presentation skills., • High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors., • Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities. Additional eligibility requirements Work authorization/security clearance requirements: Active Secret clearance is required. Other Duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Supervisory Responsibility: None Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs. Position Type/Expected Hours of Work: The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status. Telework: • Situational telework may be allowed for this position subject to customer requirements/expectations. Travel: • Ability to travel CONUS; potential to travel OCONUS, • Travel up to 10% may be required Benefits and Additional Compensation: KMS offers a competitive benefits package including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace. #ZR #LI-KMS

Job Description Position Summary: The Administrative Assistant provides clerical and logistical support for technical and program operations related to Navy ship maintenance and repair programs. This role requires attention to detail, familiarity with Navy data tools, and the ability to coordinate administrative functions for technical teams. Key Responsibilities: * Maintain and update program schedules, reports, and records. * Coordinate communications between technical staff, Navy personnel, and contractors. * Use Microsoft Office Suite (Outlook, Word, Excel, PowerPoint) for correspondence and reporting. * Utilize Fleet Technical Support (formerly TAAS-Info), Business Objects, and MRQT for data entry and report generation. * Support meeting coordination, document preparation, and file management. * Track and process technical documentation and maintenance reports. Required Experience & Skills: * Proficiency in Microsoft Outlook, Word, Excel, and PowerPoint. * Experience with Fleet Technical Support (TAAS-Info), Business Objects, and MRQT. * Strong organizational and communication skills. * Ability to work independently and meet deadlines. Vector CSP, LLC is an Equal Opportunity Employer. We do not discriminate in employment decisions based on race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status, or any other legally protected status. We are committed to providing reasonable accommodations to individuals with disabilities in the employment application process. EOE AA/M/F/D/V. For assistance, please contact our Human Resources Department by telephone at (252) 337-5120 or by email at . We offer Medical, Vision, LTD, STD, Life Insurance, Dental, 401K, PTO, and Tuition Reimbursement to those who qualify. Like us on Facebook, & follow us on LinkedIn,

Job DescriptionDescription: Summary: The Program Manager shall directly contribute to program efforts in several areas, including cost management/avoidance, schedule estimation and tracking, contract performance management, risk management, requirements analysis, and quality assurance activities. Ensures proper performance of tasks necessary to ensure the most efficient and effective execution of the contract. The PM shall utilize expert communication skills needed to direct the skilled technical resources and report on the progress, issues, and problem areas, as well as write and review program and contractual documents. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Responsible for the overall management of service jobs involving the maintenance and repair of Isotta Fraschini Motori marine engines installed on various customer vessels. Projects typically will serve Littoral Combat Ship (LCS), Expeditionary Fast Transport (EPF), Mine Counter Measures (MCM), and USCG buoy tender programs., • Accountable for controlling and reporting cost, schedule, and performance of assigned service jobs to ensure the operations teams achieve and comply with contract requirements., • Indirectly manage and extensively communicate with the operations team to ensure coordinated job performance and availability of manpower and supplies. Routinely use project schedules and data (analysis reports) as communication tools., • Serve as the customer’s primary contact for all contractual and business matters pertaining to service jobs. This includes, but is not limited to, preparing quotations, and negotiating contracts and purchase orders to define scope of work, schedule, deliverables, requirements and price., • Champion process changes to continuously improve the productivity and efficiency of operations., • Routinely monitor specific job and overall business performance by deriving and reporting key performance indicators (KPIs); use KPIs to drive operational changes and continuously improve., • Securely organize and maintain project documents, including records of contracts and evidence of customer deliverables. Communication – Shares information in an effective and collaborative manner. Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. Ability to multitask several projects at any given time. Ability to prioritize work flow to ensure timely completion. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions using a holistic business approach; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others. Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals. Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources. Diversity - Shows respect and sensitivity for cultural differences; educates others on the value of diversity; promotes a harassment-free environment; Builds a diverse workforce. Ethics - Works with integrity and ethically; upholds organizational values. Requirements: Qualifications • Bachelor’s Degree in Science Discipline or Engineering, • Five or more years of professional experience in a program or project management role (one involving engines or power systems equipment preferred), • Project Management Professional (PMP) certification preferred, • Awareness level knowledge of engine maintenance and repair activities including familiarity with spare parts and related equipment, • Ability to read, analyze, and interpret technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Working knowledge of Project Management software; MS Word and MS Excel., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • The noise level in the work environment is usually moderate. Fincantieri Marine Systems is an equal opportunity employer and is committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. We are proud to be a company that values diversity and inclusion in the workplace. Fincantieri Marine Systems also takes affirmative action to employ and advance in employment individuals from historically underrepresented groups, including women, minorities, individuals with disabilities, and protected veterans. We encourage all qualified candidates to apply and join our team in supporting innovation, integrity, and excellence in the maritime industry.

AutoNation - AutoNation Ford Lincoln Orange Park [Warehouse Associate / Freight Handler] As a Parts Shipping and Receiving Associate at AutoNation, you'll: Deliver and pick up parts as requested by the parts manager; Load truck in such a way as to eliminate damage to sheet metal and other fragile pa

Job Description???? What’s In It For You? * ???? Competitive pay that rewards your hustle * ???? 401(k) with company match – future you says thanks * ???? Full suite of benefits – medical, dental, vision & more * ???? Paid vacation and PTO – because rest is part of the recipe * ???? Real career growth – we don’t just fill positions, we build futures * ???? A leadership team that’s got your back and a culture that feels like home ???? What You’ll Be Rockin’ Every Day * Keep operations running smoother than fresh butter on pancakes * Recruit, train, and hype up your team from the front line to the back * Track financials, manage costs, and drive those profits up * Ensure every plate, shift, and shift lead meets gold-star standards * Build a kickass team culture and strong community ties that keep folks coming back ???? What You Bring to the Table * 3+ years of restaurant management experience (you’ve been around the grill) * High school diploma required; college creds are a sweet bonus * Strong leadership mojo with the ability to motivate and organize * Solid multitasking chops and a knack for hitting performance goals * A business brain with a heart for hospitality * Flexibility to work nights, weekends, and holidays – we’re always open * Valid driver’s license and willingness to travel when needed * Food Safety Manager Certification (or you're down to get it) Join a team where your leadership actually matters—and where pancakes are always part of the plan. If you're passionate about people, running a tight ship, and serving up results with a side of awesome, let’s make it official. Apply today and bring your flavor to Denny’s! ???????? #INDEED

Job Description Mission Speechify is the easiest way to listen to the world's information. Articles on the web, documents in the cloud, books on your phone. We absorb it all and let you listen to it at your desk, on the go, at your own speed, and with tools that make learning easier, deeper, and faster. What streaming services have done for audio entertainment, we're doing for audio information. And whatever we're doing seems to be working. We're #1 in our category, and experiencing exponential growth. Overview We're looking for a Senior Software Engineer to join our Core Experiences Team. This team builds and maintains the foundational services and SDKs that power Speechify's product experience across platforms. It's a critical role for someone who enjoys working at the intersection of product and infrastructure, thinks strategically, and is passionate about designing clear, reliable APIs and simple systems that directly enhance the user experience. What You'll Do • Collaborate with Speechify's Product Teams to scope projects, find ways to reduce scope to get faster feedback from customers, navigate the integration/UX tradeoffs relevant to different product teams, and deliver solutions via our cross-platform SDK, • Optimize existing functionality to ship things like faster loading and more intelligent parsing by designing more efficient abstractions and improving our algorithms, • Systems thinking. You know that optimizing a system requires end-to-end design, and you believe simplicity is valuable., • Speed. You work quickly to generate ideas and options and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs, • Preferred Tech Stack:, • Kotlin Multiplatform (Java experience is OK but role is Kotlin Multiplatform), • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Naval Training Command, Great Lakes, IL, for training in basic electrical and engineering courses, water adaptability and physical fitness. Equipped with state-of-the-art diving systems, they master everything from underwater welding to deep-sea salvage and submarine rescue. Carrying out ship and su

Maritime Division works at shipyards around the world from our regional offices in Jacksonville, FL, Chesapeake, VA, and San Diego, CA. Build infrastructure (cabling, connections, racks) and install and test equipment and devices on ships and submarines. Read and understand shipboard installation dr

An associate degree or higher in Mechanical Engineering, Structural Engineering, Mechanical or Structural Engineering Technology.

Job Description About Enstructure Enstructure is a leading U.S. marine terminal and logistics company that owns and operates an integrated network of dry, breakbulk, and liquid bulk terminals across the country. Our mission is to provide safe, reliable, and efficient logistics services that support our customers' growth and success. We are committed to fostering a culture of safety, integrity, and opportunity, where every team member is empowered and valued. Join a team where your contributions make a meaningful impact, and your growth is supported every step of the way. Equipment Operator employees must: • Possess a valid TWIC., • Safety-toe boots/shoes., • are not using cellular phones while on duty., • Have excellent written and verbal communication skills., • Able to follow verbal and written instructions. SUMMARY OF POSITION: As an Equipment Operator at Enstructure, you will play a key role in supporting terminal operations by safely operating a variety of heavy equipment to load, unload, move, and stage cargo. This includes forklifts, paper clamp trucks, stackers, front-end loaders, and other specialized equipment used in port and warehouse operations. You must maintain a strong commitment to safety, teamwork, and productivity while ensuring cargo is handled according to operational and customer standards. While maintaining inventory and ensuring production organization and cleanliness. Candidates must be willing to work overtime, weekends, and holidays as needed, including extended schedules of 6 to 7 consecutive days during peak operations. Essential Duties and Responsibilities: • Maintain coordination of team functions, ensuring continuous control of the daily team operations. Consistently aware of work conditions, time, service, and quality., • Establishes leadership in terms of setting examples in appearance, attendance, demeanor, responsibility, and dedication to the company., • Lift, stack, unstack, and move bulk and break-bulk materials using diesel, electric, or propane-powered trucks equipped with fork or clamp attachments., • Ensure goods are stored in the correct area for efficient retrieval., • Load and unload trailers, containers, boxcars, and cargo off vessels., • May perform a variety of manual duties, including lashing and shoring cargo aboard the ship, attaching slings, hooks, or other lifting devices to the winch for loading or unloading, and signaling other workers to move, raise, or lower cargo. May direct the activities of the cargo gang, less experienced stevedores., • Performs quality-checking and escorting responsibilities as required and other duties as assigned., • Notify the supervisor of unsafe situations or not in the best interest of the team., • Responsible for ensuring all team tasks are completed by the end of the shift., • Works on miscellaneous projects as needed., • Able to function independently, exercise sound judgment, and demonstrate initiative and tact in handling all the above responsibilities., • Adhering to the Company’s safety policies and procedures, those set out by OSHA., • Can pass written and equipment operation forklift certification tests. Basic knowledge areas include Safety Procedures; Truck Inspections; Storage and Exchange Points; Counterbalance Effect; Stability Triangle; Center of Gravity; Equipment Terminology; Attachments, Load centers; Battery Inspection; and Material handling including loading and de-stacking, unloading, and stacking of counterbalance, traveling, Ramps, Trailers, and parking., • Knowledge and willingness to perform all responsibilities of each position within the team., • Excellent interpersonal skills, respectful and kind to self and others., • Resourceful, well-organized, and dependable., • Good organizational skills, • Ability to communicate with diverse personalities., • Be attentive to details and be able to work and make decisions logically and independently., • Good understanding of warehouse operations. ANTICIPATED PERCENT OF TRAVEL: 0%-10% Physical Demands/Work Environment: • Ability to regularly stand, walk long distances, and talk and hear., • Ability to frequently use hands and arms to grab, handle, or feel, and reach., • Ability to occasionally sit and stoop, kneel, crouch, climb, or crawl., • Ability to occasionally climb ladders or stairs., • Ability to regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 150 pounds, with assistance or lifting machinery as necessary., • Must wear Seaonus required safety PPE, Safety vest, hardhat, gloves, etc., • Vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Working indoors and outdoors., • Excessive heat or cold, extreme weather conditions, excessive humidity or dampness, or chilling., • Slippery and uneven walking surfaces., • Work around moving objects, vehicles, and moving machinery/heavy equipment. 7:00 AM - 4:00 PM Weekends and Holidays as needed, Overtime, and extended schedules of 6 to 7 consecutive days during peak operations.

Advanced level tack welder in common shipboard positions (overhead, vertical, horizontal). Advanced knowledge of shipbuilding standards (009-12, W1689). Workmanship in fitting operations.

To be eligible to enlist in the U.Navy, candidates must be between the ages of 18-34.Not many people can claim the ocean as their office.As a Navy Diver, your job will take you to the depths of the sea to perform underwater welding on ships, search harbors for impediments, retrieve sunken ship wreck

Job Description Position Summary: The purpose of a Flex Warehouse Worker / Driver is transporting orders over designated routes; ensuring safe operation of vehicles; and loading and unloading orders; maintaining required inventory levels; ensuring specifications, quantity and quality of orders are correct; verifying stock and identifying losses; and maintaining and organizing warehouse layout. Essential Duties/Responsibilities: • Pick, pack, and ship orders with precision and care according to requisitions generated by sales, • Receive and organize incoming supplies, • Identifies damaged products, • Follows all security and safety procedures established by the EMS and Branch, • Maintains fixtures and equipment, • Assists with bin location upkeep and the physical inventory process, • Monitors inventory stock levels for the purpose of notifying departments to ensure adequate stock levels, • Perform cycle counts as required following through on discrepancies as needed., • Assist in performance of year-end physical inventories, • Load and unload goods and materials from the warehouse onto the vehicle, • Transport goods and materials to various locations in a safe and timely manner, • Ensure that all goods and materials are properly secured during transport, • Inspect vehicles for mechanical issues and report any problems to the supervisor, • Maintain accurate records of deliveries and pickups, • Assist with warehouse duties as needed, including packing and unpacking goods and materials, • Performs other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment. Education: • High school diploma or equivalent Experience/Skills/Abilities Required: • Valid driver's license and clean driving record, • Experience operating a variety of vehicles, including trucks and Operating equipment used in warehouse, • Requires the ability to lift and/or move up to 50 lbs., • Requires the ability to speak, read and comprehend instructions, short correspondence, and policy documents, as well as converse comfortably with customers, • Attention to detail and ability to follow multistep, written, and oral instructions, • Speak clearly, • Adhering to safety practices, • Operating standard office equipment including pertinent software applications, • Preparing and maintaining accurate records, • Required to perform basic math Work Environment/Physical Demands: • Most of their time will be spent driving and loading/unloading goods and materials., • Significant lifting, carrying, pushing, and/or pulling; some climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling., • Generally, the job requires 50% driving, 30% walking, and 20% standing., • May be required to work in a variety of weather conditions. We are an equal opportunity employer, dedicated to fostering a diverse and inclusive workplace where everyone is valued and has equal access to opportunities. WE ARE A DRUG FREE WORKPLACE Job Posted by ApplicantPro

Job Description Year Round position located in Mayport, FL. Primary responsibilities include, but are not limited to: Designer (Electrical) \n • Perform ship checks to support DDG design development. \n, • Acting in a liaison capacity supporting the local PMR, RMC, and their Installing Agents (IA) with the installation of maintenance and/or modernization alterations during the ships scheduled CNO availabilities.\n, • Annual wage and promotion increases\n, • Flexible work schedules\n, • Vacation/Sick time options\n, • 401k matching.\n\n Required/Preferred Education/Training \n • High School Diploma / GED required.\n, • Associates / Bachelor's degree in a technical field preferred.\n, • Proficiency with Microsoft Office tools required.\n Required/Preferred Experience 1st Class ($30.02/Hr - $35.57/Hr): \n • Minimum of seven (7) years design experience, OR\n, • Bachelor's degree with (2) years design experience, OR\n, • Associate/Vocational School degree with four (4) years design experience required.\n, • Minimum of four (4) years design experience, OR\n, • Bachelor's degree in a related technical field (Engineering, Engineering Technology, Architecture), OR\n, • Associate/Vocational School degree with two (2) years design experience required.\n, • 3D CAD or AutoCAD proficiency.\n, • Credit may be given for graphic arts or computer information systems experience.\n\n\n, • Ability to interpret and follow technical procedures, standards, and work instructions required.\n, • Marine design/liaison experience may be required.\n, • Design background with multi-discipline experience preferred.\n, • Proficiency in developing design in Auto-CAD.\n, • Knowledge of DDG Class ships and shipboard systems.\n, • Proficiency in moderate to complex development work, problem solving and the review/check of another employee's work may be required.\n, • Must have strong communication skills and ability to work in a team environment.\n, • Demonstrated ability to work independently with little oversight.\n, • Ability to represent Bath Iron Works autonomously and in a professional manner.\n, • Ability to obtain a Secret clearance required., • \nThis position requires you to be able to obtain a government security clearance if you do not already have one. You must be a US Citizen for consideration and you must be able to obtain an interim security clearance within the first 45 days of hire. For more information regarding the security clearance process, please visit Investigations & Clearance Process (dcsa.mil)\n\n\n, • This job requires visiting ships on a regular basis and working in an industrial environment. This will require some climbing, kneeling, bending, carrying a back pack and occasionally needing to squeeze in between cabinets and into tight spaces.

Immediate opening for a SOLO Class A CDL Part Time Truck Driver and we want the right Trucker to join us in Jacksonville, FL. Ryder Drivers are the Captain of the Ship OUR DRIVERS make decisions to keep yourself and others safe and we protect your job when you do. SOLO Class A CDL Part Time Truck D

Three years should be closely involved with practical surface ship maintenance, design, operation, and other problems of main propulsion, auxiliary, electrical, and damage control equipment associated with shipboard level maintenance. Oversee the performance or provide guidance IAW Corrosion Control

As a Sales Representative at PLS Logistics Services, you will act as an essential resource for your customers, helping ship their freight across the nation, 24/7/365. Chairman's Club opportunity celebrate with the best of best as a reward for being a top sales representative. Ongoing sales competit

Skills and Proficiencies: Have superior skills in complex mechanical, sub-assembly, rack and chassis assembly Have superior leadership abilities Consistently demonstrate superior workmanship in a mission-critical environment Other Responsibilities: W Technician, Marine Engineer, Submarine, Structura

LOGGING ON TO THE VIRTUAL EVENT:. Our Recruiters will tell you all about life and work on board a cruise ship and then they'll begin conducting 1:1 virtual interviews.

This could be your lucky day! We invite you to read more about exciting shipboard opportunities on board M/S Pride of America, sailing year-round in Hawaii!. Inaugurated in 2005, Pride of America is the first US-flagged cruise ship in nearly fifty years. She is currently the only American registered

Job DescriptionDescription: Basic Purpose and Function: This skilled manufacturing position is responsible for providing maritime ship fitting skills for repairs to ships and boats in the United States Navy, United States Coast Guard, Military Sealift Command (MSC), and commercial vessels. They must be able to complete and execute the assigned work tasks following regulatory specifications assigned to the vessel. Major Responsibility (Functions/Duties): • Measures and removes steel and/or aluminum components. Fabricates and reinstalls these components at the gap tolerance for the welders., • Determines proper equipment to be used; inspects, tests, and repairs work pieces accordingly., • Tack welds metal parts in place for the welders., • Connects hoses from torch to tanks of oxygen and fuel/shielding gas and turns valves to release mixture., • Ignites torch and regulates flow of gas and air to obtain desired temperature, size, and color of flame., • Preheats work pieces preparatory to fitting or bending, using torches or other heating elements., • Examines work pieces for defects and measures work pieces with straightedge or templates to ensure conformance with specifications., • Climbs ladders or works on scaffolding platforms., • Dismantles metal assemblies or cuts scrap metal, using thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment., • Positions and secures parts, using hoist, crane, wire and banding machine, or hand tools., • Selects, positions, and secures torch, cutting tips, or welding rod, according to type, thickness, area, and desired temperature of metal., • Fits entities per template, blueprint, or dimensional., • Sets in correct position, level, scribes as required to obtain correct designed dimensions, cuts excess and tack., • Guides and directs flame or electrodes on or across work piece to straighten, bend, melt, or build up metal., • Must understand and follow Lock Out / Tag Out (LOTO) procedures., • Must understand and follow Work Authorization (WAF) process., • Must understand and follow all Hot Work procedures., • Set up, troubleshoot, and utilize welding machines., • Lay out and measure utilizing both the Imperial (English) and metric system., • Understand system drawings and blueprints., • Measure, remove, fit, and reinstall at acceptable gap structural steel and aluminum components., • Work with hand and power tools., • Operate and/or assist with overhead cranes to include safe rigging of components to be lifted., • Understand, interpret, and apply Naval Sea Systems (NAVSEA) MIL-STD-1689) and MIL STD 248D requirements., • Must be proficient in “washing weld.”, • Work non-standard work hours, as required., • Work at all height levels (high and low.), • Work in confined and enclosed spaces. Education and Experience: • Two (2) plus years of experience with Weld Certificates from technical school preferred., • A high school diploma or equivalent is preferred, but not required., • Must be able to pass a MIL STD 248D certification test prior to being considered for hire., • Working knowledge of the NAVSEA Standard Items and other regulatory bodies such as the American Bureau of Shipping (ABS) and United States Coast Guard (USCG)., • Working knowledge of local NAVSEA Standard Items, specifically Southeast Regional Maintenance Center (SERMC).

Job Description Unite Contracting is hiring a Ship Repair Electrician based in Tampa, Florida for full-time, year-round work. This is a permanent W2 position—not offshore, not seasonal. You’ll perform marine electrical maintenance, troubleshooting, and motor control work on tugboats, push boats, and crew boats at ports across the Tampa region. We are actively seeking candidates from Jacksonville and surrounding areas who are open to relocating or commuting to Tampa for a permanent position. Local travel only — no per diem Overtime available for after-hours service calls Company truck and gas card provided Compensation & Benefits • $35.00–$40.00 per hour (depending on experience), • Company vehicle + gas card, • Health, dental, and vision insurance, • Referral program, • Year-round job security, • Perform electrical service calls, repairs, and maintenance on marine vessels (tugboats, push boats, crew boats), • Install and maintain switchboards, controllers, motors, circuit breakers, alarms, and lighting systems, • Run cable, mount electrical equipment, and perform terminations and hook-ups, • Troubleshoot electrical systems using meters and diagnostic tools (voltmeters, ohmmeters, phase rotation indicators, etc.), • Conduct insulation resistance tests on electrical cables and recommend repairs or replacements, • Maintain an inventory of electrical parts and assist with requisitions, • 5–7 years of marine electrical experience (required), • Proficiency with motor controls, power distribution, cable installation, and terminations, • Ability to read and interpret electrical diagrams and technical documentation, • Valid driver’s license; willing to travel locally to multiple ports in the Tampa area, • Full-time | 40–60 hours per week, • Day shift | Monday–Friday, • 8-, 10-, or 12-hour shifts depending on workload If you're a skilled Marine Electrician looking for steady work, competitive pay, and a supportive team environment, Unite Contracting wants to hear from you. Apply now to join a growing company that values your expertise and offers the tools to help you succeed. #hc191336

Job Description Duties and Responsibilities • Advanced understanding of and ability to accomplish, • NAVSEA Standard Item (NSI) 009-73 requirements, • Inspection, testing, installation, removal, and repair of shipboard electrical cabling and electronic equipment, • Cable installations include banding, boxes, connectors, equipment, penetrations, cableway, hangers, and associated components, • MCT, MCP, Stuffing Tube opening, packing, closing, and testing, • Bonding and Grounding of Electrical Equipment, • NSI 009-25 requirements, • EIMB, EPISM and Electrical MIL standards, • Electrical troubleshooting, use of multimeters, megohmmeters and network testers, • Initiate Tagout/ Work Authorization Forms (WAF), • Interpret and breakdown work scope from drawings (arrangement, block-wiring, isometric, cable routing, power, lighting, and IC system removal/installation), • Electrically install Manual Bus Transfers (MBT), Automatic Bus Transfers (ABT), Switchboards, and Transformers, • Electrical Fit up – use of grinders, reciprocating saws, drills, • Lead small electrical teams in the execution of an electrical work item or ship alteration, • Track and report job physical progress and budget performance to your supervisor, • Required to have personal tools to include but not limited to, • Multimeter, • Hand tools, • Hardwire termination tools (Insulated and Non-Insulated Ratcheting Crimpers, etc.), • Perform all work in accordance with the established policies and procedures detailed in the Waveforce Electrical Safety Manual Experience Requirements • Three (3) years direct experience in shipboard electrical installation and repair services, • High School Diploma or Equivalent, • Must be at least 18 years of age, • NSI 009-73 Qualified Connector Fabrication Certification (preferred), • NSI 009-123 Qualified Fiber Optic Handling (preferred), • Must be able to pass Waveforce Electrical pre-employment drug and background screening., • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations, • Must successfully complete OSHA 10 Hour Training, Virginia Ship Repair Association (VSRA) Safety Orientation and all required Environmental, Health and Safety orientation training after initial employment, but prior to shipboard work 0keZYW13Vu

Job DescriptionLabor One is hiring Journey-Level Marine Electricians for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES -Must comply with OSHA standards and the shipyards best safety practices. --Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Keep your work area clean and safe at all times, especially at the end of the shift. -Understand relevant work processes, operation of equipment, and complete tasks proficiently. -Use appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book in repairing electrical equipment and installing electrical equipment. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Work shifts and overtime as assigned. -Comply with the Company's “Non-Discrimination and Anti-Harassment ---Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. -Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment., 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding., 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., 7. Install new power and lighting circuits., 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual., 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. ---The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. -Appropriate --PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 2nd Shift 40 hours per week / OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Job Summary We are seeking experienced First-Class (Journeyman) Marine Electricians to support U.S. Navy and commercial ship repair projects. Electricians will independently install, repair, and maintain shipboard electrical systems in compliance with NAVSEA standards and company safety/quality requirements. This role requires technical expertise, blueprint interpretation, and the ability to perform complex shipboard electrical work safely and efficiently. Responsibilities • Inspect, test, install, remove, and repair shipboard electrical cabling and equipment in accordance with NAVSEA Standard Item (NSI) 009-73., • Complete cable installations, including banding, boxes, connectors, penetrations, cableways, hangers, and related components., • Perform stuffing tube work, MCTs, MCPs, bonding, and grounding of electrical equipment., • Follow WAF/tag-out procedures (NSI 009-25)., • Read and interpret blueprints, schematics, and cable routing diagrams., • Assist and oversee installation of MBTs, ABTs, switchboards, and transformers., • Perform electrical fit-up using grinders, reciprocating saws, drills, and hand tools., • Maintain a clean and safe work environment; ensure compliance with all safety and environmental procedures., • Minimum 5 years of shipboard electrical installation and repair experience at the First-Class (Journeyman) level., • High School Diploma or equivalent., • Must be 18 years or older and a U.S. Citizen., • Must pass pre-employment physical, drug test, and background screening., • Ability to obtain DBIDS/government facility access and shipyard clearance., • Must complete OSHA 10-Hour Maritime Training and all required Environmental, Health, and Safety (EHS) orientation prior to shipboard work., • Must have personal tools, including a multimeter and hand tools., • Ability to lift 50 lbs., work in confined spaces, climb ladders, and perform work aboard vessels., • Willingness to work overtime, weekends, and occasional travel (up to 30%)., • Experience with Manual/Automatic Bus Transfers, Switchboards, Transformers, and complex shipboard electrical systems., • Previous work on both U.S. Navy and commercial vessels., • Ability to carry, lift, climb, walk, crawl, crouch, kneel, stand, and work in hot, cold, dusty, or noisy environments., • Visual acuity sufficient to read blueprints and perform precision electrical work., • Reports to Shop Supervisor., • Works closely with fellow electricians, craft foremen, and shipyard personnel in a team environment.

Job Description Position Title: Operations Manager (Site) Location: NAS Jacksonville, FL Position Summary: Manages the activities of training sites. Develops and implements policies and procedures and ensures compliance with these procedures. Evaluates activities to improve efficiency and effectiveness. May coordinate communication between different functions. Manages subordinate employees in the day-to-day performance of their jobs. Ensures that project/department milestones/goals are met and adheres to approved budgets. Required Qualifications: • Secret Clearance, • Experience managing a dispersed workforce in support of DoD training range requirements Preferred Qualifications: • Seven (7) years of DoD training range experience, • Three (3) years of managerial experience with DoD efforts Education: • Required: Highschool Diploma or GED equivalent At Sayres, our employees enjoy an atmosphere conducive to realizing their potential through personal and professional development while simultaneously exceeding customers' expectations. We offer a broad spectrum of technical, engineering and administrative services including acquisition, financial and program management; fleet synthetic training; logistics; ship construction engineering; systems engineering and integration; wargaming; test and evaluation; security, counterintelligence and policy analysis. Sayres is headquartered in Washington, DC with offices throughout the United States and has a presence abroad. #cj Job Posted by ApplicantPro

Job Description Mission Coordinator The Mission Coordinator is responsible for managing and supporting the full lifecycle of mission planning and coordination activities. This role ensures seamless integration between training assets, operational units, and support agencies. The Mission Coordinator will develop mission materials, provide scenario support, and facilitate pre- and post-mission operations. Responsibilities: • Develop, produce, and continuously update written, photographic, audio, video, and mixed media training aids and materials for mission planning., • Familiarize users with range capabilities, assets, and operational procedures through detailed debriefings., • Support planning and coordination for agencies participating in or supporting training operations., • Attend pre-mission conferences for users and support groups., • Coordinate training system assets., • Communicate daily with aviation units, air control units, airspace/air traffic control agencies, and training system facilities to ensure necessary coordination., • Maintain computer databases of range utilization and prepare reports on range availability, scheduling, and utilization., • Develop and deliver capability, operation, and requirement briefings to military and government agencies, including VIP presentations., • Provide equipment operator training to on-site personnel for the use of display consoles., • Conduct equipment demonstrations for authorized personnel., • Assist users in developing training scenarios and coordinating fleet exercises., • Implement and administer an effective, rapid, and comprehensive method of distributing mission scenarios and updates., • Typically requires 5 years of related experience in mission coordination, training systems, or operational support roles., • Experience working with military, government agencies, or training environments is highly preferred. The position description is only meant to be a representative summary of the major responsibilities and accountabilities performed by the incumbents of this position. The incumbents may be requested to perform position-related tasks other than those stated in this description. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, gender identity, disability or veteran status. At Sayres, our employees enjoy an atmosphere conducive to realizing their potential through personal and professional development while simultaneously exceeding customers' expectations. We offer a broad spectrum of technical, engineering and administrative services including acquisition, financial and program management; fleet synthetic training; logistics; ship construction engineering; systems engineering and integration; wargaming; test and evaluation; security, counterintelligence and policy analysis. Sayres is headquartered in Washington, DC with offices throughout the United States and has a presence abroad. #cj Job Posted by ApplicantPro

Job Description Operations Leader – Full Time JR Dental Argyle – Jacksonville, FL Lead with heart. Manage with purpose. Grow with a team that feels like family. What if your next leadership role wasn’t just about running a dental office—but about building a team, shaping a culture, and making a lasting impact in your community? At JR Dental Argyle, our team is known for its upbeat energy, tight-knit support system, and the kind of outstanding patient care that’s reflected in our consistently glowing reviews. We're looking for an experienced, people-first Operations Leader to help guide and grow our practice—someone who thrives in a collaborative, patient-focused environment and takes pride in mentoring others, solving challenges, and keeping the day-to-day running smoothly. Our office isn’t just efficient—it’s joyful, community-minded, and genuinely fun to be part of. If you're ready to take your leadership skills to a practice where your contributions are valued and your team has your back, we’d love to meet you. Pay: Depending on experience and skills What You’ll Do: Of course you'll juggle schedules, keep collections on track, and maybe even have a sixth sense for spotting low glove stock—but let’s be real, your superpower is building a vibe where you elevate the team to maximize performance, and build a practice that runs like a well-oiled (and genuinely enjoyable) machine, all while positioning yourself for real career growth. What You Bring: You’re part strategist, part coach, and maybe even part office therapist—able to read a spreadsheet and a room with equal skill. You’ve got the drive to hit goals, the vision to scale what’s working, and the leadership magic to bring people with you as you grow the team, the practice, and your own career. • 2+ years in a leadership role in dental, medical, retail, or service industries, • Bachelor's degree preferred, • Strong communication and problem-solving skills, • A natural leader who builds trust, encourages growth, and keeps the team focused and motivated, • Experience with financial oversight and P&L responsibilities, • Comfort using Microsoft Office and operational management tools, • A solution-driven mindset and a passion for service excellence Compensation & Benefits: With a clear path to leadership, hands-on training, and benefits that set you up for long-term success, this is more than a job—it’s your next big move. We’ll invest in your growth, cheer on your wins, and make sure you’re not just clocking in—you’re building something meaningful (and yes, you’ll get to use that PTO… it isn’t just decorative). • Competitive pay that matches your experience—because great leadership should be rewarded, not negotiated, • Health, Dental, and Vision Insurance, and so much more! Take care of yourself while you’re busy taking care of everyone else (your smile included)., • Paid Time Off (accrue 2 to 3 weeks per year based on tenure) + 6 Paid Holidays—whether it’s a passport stamp, a mountain trail, or a Netflix marathon, you’ve earned it., • 401(k) program—Saving for your future just got easier, your retirement dreams are cheering you on., • On-the-job training and leadership development—Because the best leaders never stop learning (and we’ll make sure you don’t have to Google everything)., • Supportive team culture and real growth opportunities—where teamwork, encouragement, and leveling up are just part of how we do things. Step into a leadership role where your impact matters—Every. Single. Day. Apply now and help lead a practice that values people, performance, and purpose.

Job DescriptionThe Naval Surface Warfare Center Philadelphia Division (NSWCPD) has a requirement for NSWCPD Code 422, which is responsible for execution of the Diesel Maintenance Strategy (DMS) Program on LCS-1 & LCS-2 Class ships and FFG 62 Class vessels, with an available opportunity for a Lead Diesel Lifecycle Engineering Representative position. Maintenance designed to support the operational profile of the Optimized Fleet Response Plan (O-FRP) is the primary mission of the Diesel Maintenance Strategy (DMS). DMS provides guidance for integrating the Diesel Readiness System (DRS), Mid-Cycle Assessments and Diesel Engine Inspections to provide DMS Core Element deliverables to maintenance teams. The information provided by the DMS system is used for planning and execution of maintenance in alignment with the O-FRP. The objective of DMS is to baseline the class maintenance plan by technically validating Life Cycle Maintenance requirements. DMS is designed to improve the accuracy of work specifications and provide a closed loop work product evaluation and improvement process. DMS also integrates the DRS program for technical evaluation of equipment and adjudication of deferrals throughout the O-FRP cycle. DMS Program Management is the responsibility of the In-Service Engineering Agent (ISEA) located at Naval Surface Warfare Center Philadelphia, PA. The ISEA manages the program on a ship class and engine type basis. The ISEA Class Program Managers (CPMs) report to the technical warrant holder in NAVSEA 05 for all DMS-related technical matters. Required Experience: • Required Education: High School Diploma or GED, • Fifteen (15) years of US Navy Engineman or relevant maritime experience in the areas of Navy diesel propulsion and power generating systems., • Three (3) years of experience with the Diesel Maintenance Strategy (DMS) and Diesel Readiness System (DRS) programs. Experience should include prior certification as a US Navy Fleet Diesel Engine Inspector (DEI) and/or an OEM Technical Service Representative., • Personnel should have at least four (4) years combined experience with the following engine lines: FM-Pielstick Model 16V-PA6B STC, IF Model 1708C2ME8 and MTU Models 8000, 4000 & 396. OgmS9sEUx2