Trabajos operations engineer en MiddlesbroughCrear alertas

New opportunity to join one of the UK's leading independent bulk liquid storage providers, operating four strategically located terminals across the country. The Company supports a wide range of sectors including chemicals, petroleum, gases, bitumen, and emerging energy markets such as hydrogen, sustainable aviation fuel (SAF) and carbon capture. As a key part of the UK's critical national infrastructure, Navigator is committed to safe operations, exceptional customer service, and ongoing investment to support future growth and the energy transition. A vacancy now exists for an Electrical Engineering to join the team. Negotiable Salary + Bonus + Private Healthcare The roleYou will be a Subject Matter Expert for electrical systems and equipment, ensuring safe and reliable operation of our client's electrical systems and electrical assets. Provide technical support, leadership and guidance to projects, operations, and maintenance. Take responsibility for electrical aspects of projects & modifications, developing and reviewing designs and specifications for new electrical systems and equipment. Key Accountabilities: • Responsible for implementation of the companies Electrical Safety Rules and review as required in line with changes in legislation and industry best practise., • Designated Electrical Competent Person under Electricity at Work Regulations for all Navigator terminals. Authorising Engineer., • Competency assessment of site electricians and contractors' electricians., • Specification, budgeting and scheduling of electrical inspection and preventative maintenance, including HV / LV and ATEX routines to ensure reliable, safe and reliable operation., • Development of HV switching programs, • Responsible for the application of appropriate electrical engineering codes and standards and management of any deviations from standards., • Technical review of designs undertaken by Navigator engineers and design houses., • Prepare cost estimates and business case proposals for electrical equipment/system CAPEX. Required Skills, Qualifications & Experience: • Degree educated in Electrical Engineering, • Chartered Engineer Status or working towards Chartership, • Experience managing design/installation/commissioning and maintenance of electrical systems on a COMAH site, preferably in the bulk liquid storage sector, • Significant electrical system design experience, load lists, SLDs, cable sizing, fault level, protection grading studies and motor starting calculations. Lightning protection calculations., • Specification of equipment for installation in Hazardous areas, • Risk Assessment, • Site Commissioning and Troubleshooting experience, • Experience as designated competent person under Electricity at Work Regulations. Experience in roles such as: Authorised Person, Senior Authorised Person, Control Engineer and Authorising Engineer, • Experience in managing ageing assets, • Experience in training and mentoring site electricians, • CompEx Ex01 - 04, • CompEx Design (Ex12), parts A & B

New opportunity to join one of the UK’s leading independent bulk liquid storage providers, operating four strategically located terminals across the country. The Company supports a wide range of sectors including chemicals, petroleum, gases, bitumen, and emerging energy markets such as hydrogen, sustainable aviation fuel (SAF) and carbon capture. As a key part of the UK’s critical national infrastructure, Navigator is committed to safe operations, exceptional customer service, and ongoing investment to support future growth and the energy transition. A vacancy now exists for an Electrical Engineering to join the team. Negotiable Salary + Bonus + Private Healthcare The role You will be a Subject Matter Expert for electrical systems and equipment, ensuring safe and reliable operation of our client's electrical systems and electrical assets. Provide technical support, leadership and guidance to projects, operations, and maintenance. Take responsibility for electrical aspects of projects & modifications, developing and reviewing designs and specifications for new electrical systems and equipment. Key Accountabilities: • Responsible for implementation of the companies Electrical Safety Rules and review as required in line with changes in legislation and industry best practise., • Designated Electrical Competent Person under Electricity at Work Regulations for all Navigator terminals. Authorising Engineer., • Competency assessment of site electricians and contractors’ electricians., • Specification, budgeting and scheduling of electrical inspection and preventative maintenance, including HV / LV and ATEX routines to ensure reliable, safe and reliable operation., • Development of HV switching programs, • Responsible for the application of appropriate electrical engineering codes and standards and management of any deviations from standards., • Technical review of designs undertaken by Navigator engineers and design houses., • Prepare cost estimates and business case proposals for electrical equipment/system CAPEX., • Responsible for OPEX and CAPEX budgets Site Electrical Equipment includes: Power Transformers, HV/LV Switchgear Air, Vacuum and Oil, HV/LV distribution, tripping batteries, transformer rectifier units, ATEX and FLP Motors, Motor Starters, HV / LV VSDs, Soft Starts, UPSs, lighting, trace heating, industrial immersion heaters, HVAC, Hazardous Area Cabling/Containment/Junction Boxes, Lightning Protection Systems and Earthing and Bonding Systems. Required Skills, Qualifications & Experience: • Degree educated in Electrical Engineering, • Chartered Engineer Status or working towards Chartership, • Experience managing design/installation/commissioning and maintenance of electrical systems on a COMAH site, preferably in the bulk liquid storage sector, • Significant electrical system design experience, load lists, SLDs, cable sizing, fault level, protection grading studies and motor starting calculations. Lightning protection calculations., • Specification of equipment for installation in Hazardous areas, • Risk Assessment, • Site Commissioning and Troubleshooting experience, • Experience as designated competent person under Electricity at Work Regulations. Experience in roles such as: Authorised Person, Senior Authorised Person, Control Engineer and Authorising Engineer, • Experience in managing ageing assets, • Experience in training and mentoring site electricians, • COMPEX Ex01 – 04, • COMPEX Design (Ex12), parts A & B

Background TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of consultancy, training, testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. TUV Rheinland Industrial Services (TRIS), UK are looking for qualified candidates to join the ever-growing team as a Functional Safety Consultant on a permanent basis in either Warrington or Stockton-on-Trent , UK Offices. You will be part of an energetic and driven team and will be expected to work effectively and collaboratively with colleagues on multiple projects in a supportive, progressive environment. Our core company values teamwork, empowerment, integrity and solutions provide our cultural framework and encourage problem solving, decision making, flexibility and responsibility. We have an established competence framework, with regular appraisals and a defined pathway for progression. We strive to foster a friendly and collaborative culture where every employee can contribute to delivering outstanding engineering solutions. Responsibilities : Deliver IEC 61508 / IEC 61511 / IEC 62061 / ISO 13849 functional safety-based SIS and Machinery Safety consultancy and training services Provide specialist level technical support to TUV Rheinland clients on a range of technical queries across the applicable functional safety lifecycle Write technical papers and deliver specialist technical presentations to support TUV Rheinland functional safety service execution and work winning strategies Responsible for development and delivery of technical training related to functional safety, OT cyber security and Machinery safety solutions Build strong relationships with clients, understand their needs and assist in the delivery of tailored, pragmatic solutions. Maintain and enhance customer relationships, securing new opportunities for repeat and new consulting business. Lead assignment tasks, providing regular updates on progress and any challenges faced. Support the financial performance of consulting assignments, monitoring progress vs. costs, ensuring the timely delivery of high-quality services. Ensure compliance with company standards, customer contracts, and industry regulations. Maintain transparency in communication with clients, team members, and management. Requirements: Relevant technical engineering degree preferably in the field of Electrical / Electronics / Instrumentation / Control Systems with knowledge on OT cyber security and ideally chartered Certificated as a minimum to TV Rheinland FS Engineer or Exida CFSE status by examination Planning and managing the delivery of projects from proposal to successful delivery and project closure Technical report writing, communicating effectively and managing interfaces with stakeholders (internally and externally) Proactive self-starter, dedicated, innovative, resourceful and analytical with strong problem-solving skills Foster an efficient, innovative and team-oriented work environment. Communicate effectively and confidently with colleagues. Committed to meeting deadlines and upholding high standards Strong commercial and business acumen A genuine passion and desire to enhance company business efficiency Experience Experience of working in high hazard process industries with a specific focus on safety instrumented systems and/or machine safety Scoping new work and preparing or coordinating competitive bids A recognized industry professional in Functional Safety Management with a minimum of 3 to 10 years experience in the key issues relating to the professional application of functional safety management for the design, engineering, operations and maintenance of SIS within an operational engineering environment Demonstratable experience of engaging in a comprehensive range of detailed technical safety related matters covering SIL determination, safety requirements specification design and engineering of SIS and operation and maintenance of SIS Significant knowledge and application of safety related market experience to be able to demonstrate an authoritative understanding of the IEC functional safety compliant relationships between end users, EPCs, systems integrators and device/machine manufacturers Experience in understanding the requirements for the development of Safety Requirements Specification Preferably having safety engineering knowledge appropriate to the application of E/E/PE Safety Related Systems Demonstrable experience of planning, leading and carrying out functional safety audits and functional safety assessments Relevant experience of delivering technical training to Clients and Stakeholders Demonstrable experience of presenting SIS/Machinery related technical updates / technical solutions and engagement directly both internally and externally with Clients, Stakeholders, Regulatory Bodies, Industry Groups and Academia Preferably a member of any standards technical committee such as IEC 61508 or IEC 61511 or a professional membership Having knowledge of IEC 62443 cyber security principles would be an added advantagec272c101-f45c-4783-b4a0-50ad222b87c0

Job title Considering making an application for this job Check all the details in this job description, and then click on Apply. Fire and Security Engineer Function Fire Location Field based Reports to Service Manager (North/South) Responsible for staff N/A About our business JLA is a mission critical infrastructure solutions business offering services Laundry, Catering, Heating, Fire Safety, Infection Control and Air Conditioning. The company offers an end-to-end, on premise, machine supply and breakdown service proposition under the name Total Care, and additional products and services. JLA is driven by a world class Sales & Marketing engine, owns and maintains all assets, and has an efficient on-site operations team working with daily with customers. When you join the JLA family, you'll also gain access to an extensive benefits package. We care about our people and take your well-being seriously, which is why we offer a range of supportive tools for health and wellbeing, financial guidance, and legal advice. Our Employee Assistance Programme, 24/7 Wellness and Lifestyle App plus a dedicated team of Mental Health First Aiders are there to support you through life's challenges. We also offer up to 8 counseling sessions, which can be in-person or remote, providing you with the support and flexibility to suit your own personal needs. You can reach any fitness goals with our free onsite gym at head office along with a range of other gym membership discounts available. To offer financial support, we not only provide life assurance coverage, company sick pay, and a company pension scheme, we offer a range of added benefits such as free office parking, eye care vouchers, a cycle-to-work scheme, and exclusive discounts through our staff benefits hub. We really pride ourselves in offering a healthy work-life balance and believe it is important to have time away to recharge which is why we provide 25 days of annual leave plus bank holidays, flexible working options, and enhanced family leave policies. We are a company that appreciates you and invests in your success and even have a Colleague Recognition Scheme to celebrate your achievements. We're dedicated to your growth, offering support in career development and training. We value your referrals, and through our Refer a Friend scheme, you can earn up to £1,000 in bonus rewards! Role overview Safety systems maintenance engineer including reactive calls Key tasks * Responsible for maintenance as per level 2 and phase 2 reactive calls to sites where customers have called in faulty systems (when senior guy is already on job). * Part of the OOH call out rota. * To carry enhanced van stock to achieve high 1st fix rate. * Responsible for van stock in the same manner as level 1 and 2. Service Delivery * Demonstrate an understanding of what service delivery excellence is for your role, ensuring you deliver the basics right every time and are part of a team where service is central to good performance. Managing Risk * Awareness of your operational and regulation risks which may impend your operations. * Responsibility for reporting to your line manager any risk which may impact the business Managing Health & Safety * Conduct any Risk Assessments and Method Statements, compiling reports in line with H&S requirements * Liaising with the Head of Compliance to ensure any compliance as part of your role is in line with the framework set. Criteria Essential (attributes required for candidate to be considered) Desirable (attributes can be trained or developed) Knowledge and Skills (what you know and what you can do) * Good understanding of safety systems * Understanding of relevant BS to task * Able to fault find and rectify Experience (what you have done) Personal qualities (the way you think and act) * Good customer service skills * Ability to communicate clearly. xrnqpay * Able to use own initiative. Qualifications Asbestos Training FIA Foundation FIA Environmental FIA H&S PAT Testing BFC Extinguishers Part P Electrical FIA Maintenance Unit

Civil Engineer Ensure you read the information regarding this opportunity thoroughly before making an application. Location: Wales (South Central) Salary: £36,246 rising to £39,942 Hours: 37 hrs per week Contract: Permanent Looking to apply your engineering skills to something more meaningful? Yolk Public Sector are working with a leading environmental organisation delivering large-scale forestry and infrastructure projects across Wales. This is a great opportunity for a Civil Engineer to step into a role with real environmental impact. The Civil Engineer will: • Managing forest road construction, upgrades and maintenance, • Overseeing contractors and ensuring safe, compliant delivery, • Inspecting roads, bridges, quarries and infrastructure, • Supporting project planning, budgeting and delivery, • Civil engineering experience (infrastructure, highways or similar), • Knowledge of NEC contracts and CDM regulations, • Experience with AutoCAD and project planning tools, • Experience in rural, forestry or environmental projects If you want a role combining engineering with environmental impact and long-term career development, apply now or contact Emily Rex at Yolk Recruitment to discuss the Civil Engineer position further. Yolk Public Sector & Not-for-Profit team works with organisations across the UK to fulfil their recruitment needs and to achieve their D&I objectives. We recruit temporary, contract and permanent hires for 1 off specialist needs or for volume campaigns. We support our applicants to navigate the public sector recruitment processes and secure their dream jobs. Yolk Recruitment is an equal opportunities employer and embraces diversity in our workforce. We employ the best people for the job at hand and actively encourage applications from all qualified candidates, regardless of gender, age, race, religion, sexual orientation, disability, educational background, parental status, gender identity or any other protected characteristic. xrnqpay We champion and celebrate diversity at Yolk allowing our team to bring their whole selves to work.

Our client is one of the fastest growing providers of Cold Chain Logistics. They require a POD Engineer to join their busy team onsite team on a permanent basis. Offering a salary of £52,882 per annum the role is based 5 days out of 7, with a core pattern of Monday to Friday, 08:00am to 17:00pm - there is occasional weekend work. Key Responsibilities: Before applying for this role, please read the following information about this opportunity found below. We are seeking a proactive and technically capable POD Engineer to ensure the safe, reliable and efficient operation of the automated conveyor systems that interface with trailers, including powered chains, motors, air systems and associated control components. This role delivers planned preventative maintenance (PPM), reactive fault response and spare parts management for both fixed automation and trailer-mounted equipment. You will play a key part in maximising uptime, maintaining compliance with site and OEM standards, and supporting the smooth flow of goods through the automated loading process. Ideally based locally to your POD based in Scarborough Intermittent travel expected across all other client UK sites and customer locations, to support with maintenance and operational requirements. Depending on location, hotel accommodation will be arranged with your line manager, costs to be covered by the business and associated travel expenses. Key Duties: Automated Conveyor & Trailer Interface Systems Maintain and service automated conveyor systems feeding trailers. Work on motors, gearboxes, chains, rollers, sprockets, bearings and transfer units. Support automation interfaces between warehouse systems and trailers. Diagnose mechanical, electrical and pneumatic faults at conveyor-trailer handover points. Trailer Maintenance Deliver full PPM servicing of trailers, including powered floor systems, motors and pneumatic systems. Inspect air pressure lines, valves, hoses and connectors. Conduct condition checks during docked and undocked periods. Identify wear trends and recommend component replacements ahead of failure. Carry out cleaning of trailers as required. Planned Preventative Maintenance (PPM) Execute structured PPM schedules including daily/weekly inspections, monthly servicing, quarterly checks and annual overhauls. Record all PPM activity in the site CMMS or maintenance logs. Ensure compliance with site safety, food safety and cold-store standards. Reactive Maintenance & Fault Response Provide first-line reactive breakdown support for automation and trailer systems. Troubleshoot faults quickly to minimise downtime. Escalate complex issues to manufacturers or specialist support when required. Support recovery plans following major failures. Spare Parts & Inventory Management Manage on-site spare parts inventory for conveyors and trailer systems. Maintain accurate stock levels for motors, gearboxes, chains, sprockets, bearings, sensors, air fittings and trailer-specific components. Monitor usage trends and forecast future demand. Raise replenishment requests and support standardisation of parts to reduce SKU complexity and cost. Safety, Compliance & Continuous Improvement Work in line with LOTO and site safety procedures. Identify reliability risks and propose improvement actions. Support continuous improvement initiatives to reduce breakdown frequency. Provide technical feedback to operations and engineering management. Must be comfortable working in sub-zero freezer conditions of -19C and below. Requirements: NVQ Level 3 or equivalent in electrical or mechanical engineering. Experience working with pneumatics, electrical, and mechanical systems. Competence in PPMs and structured maintenance routines. Ability to work with OEM equipment and documentation. Experience with inventory tracking for engineering spare parts. Understanding of LOTO procedures. Please apply in writing with your CV in the first instance to Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. xrnqpay For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Technical Services Supervisor Facilities Management Location:Cardiff Learn more about the general tasks related to this opportunity below, as well as required skills. Contract Type: Full-time About the Role A fantastic opportunity has arisen for an experienced Technical Services Supervisor to lead a team of static and mobile engineers within a healthcare facilities environment. You will ensure the safe, efficient delivery of Planned Preventative Maintenance (PPM) and Reactive Works, maintaining compliance with statutory requirements and contractual obligations. The successful candidate will play a vital role in ensuring the reliability of building engineering services, supporting compliance standards, and delivering excellent customer service. This position also requires the ability to provide technical support during emergency situations to maintain operational continuity. Key ResponsibilitiesOperational Leadership • Supervise and lead a team of engineers, ensuring safe, high-quality delivery of maintenance tasks., • Manage day-to-day team operations, including HR-related matters., • Coordinate internal teams and subcontractors to ensure effective service delivery., • Support lifecycle project delivery and identify opportunities for operational improvement.Compliance & Safety, • Ensure compliance with statutory, technical and legislative requirements, including Health & Safety, Environmental, Quality and Legionella standards., • Act as an Appointed/Responsible Person for relevant technical disciplines where required., • Ensure RAMS, PPE, test equipment and working practices meet compliance standards., • Record and report accidents, incidents and near misses promptly.Maintenance & Technical Delivery, • Manage and coordinate all statutory and specialist maintenance activities., • Maintain accurate data and job records within the CAFM system., • Develop and implement effective maintenance strategies, including critical spares management., • Provide engineering support during emergency situations.Reporting & Performance, • Monitor staff and contractor performance., • Ensure KPIs, SLAs and all associated documentation are completed accurately., • Produce audits, reports and operational summaries as required., • Support labour planning and identify efficiency opportunities.Customer & Stakeholder Management, • Act as the first point of escalation for clients and customers., • Build strong, professional relationships with stakeholders., • Respond promptly to verbal and written customer queries.Skills, Experience & Qualifications, • Minimum 5 years experience as a multi-skilled engineer, qualified in a core discipline., • Strong background in Facilities Management and building services., • Knowledge of HTM (Healthcare Technical Memoranda) desirable., • Experience using CAFM systems and Microsoft Office applications., • Ability to make clear decisions under pressure.

Overview We are seeking an experienced Automation Engineer with strong VMware Cloud Foundation and orchestration expertise to design, develop, and maintain automated workflows across enterprise infrastructure platforms. This role will play a key part in driving operational efficiency, consistency, and scalability through automation. Please read the following job description thoroughly to ensure you are the right fit for this role before applying. Key Responsibilities • Design, develop, and maintain automation solutions using VMware Cloud Foundation Automation (Aria Automation / vRealize Automation vRA) and Aria Operations Orchestrator (vRO)., • Author, test, deploy, and support end-to-end automated workflows for infrastructure and platform services., • Develop orchestration and automation solutions using OpenText Operations Orchestration and/or Red Hat Ansible., • Integrate automation solutions with existing infrastructure, service management, and monitoring platforms., • Collaborate with infrastructure, platform, and operations teams to identify automation opportunities and optimise workflows., • Produce and maintain clear technical documentation for automation solutions and processes., • Support continuous improvement and automation best practices across the organisation. Required Skills & Experience, • Proven hands-on development Experience with:, • VMware Aria Automation (vRA), • VMware Aria Orchestrator (vRO), • Experience developing automation using:, • OpenText Operations Orchestration and/or Red Hat Ansible, • Strong Experience authoring and deploying automated workflows., • Solid working knowledge of XML., • Strong understanding of infrastructure platforms, including:, • Windows (Wintel), • Linux, • Virtualisation technologies, • Good working knowledge of networking concepts and protocols, including:, • TCP/IP, • DNS Desirable Skills, • Scripting Experience (e.g. JavaScript, PowerShell, Python)., • Experience integrating automation with ITSM tools (e.g. ServiceNow)., • Exposure to hybrid or cloud environments. Location: Manchester, UK Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No. 2876353. Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as Allegis Group). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the Contacting Us section of our Online Privacy Notice at for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U. xrnqpay S. Privacy Shield.

Process Engineer Location: Sedgefield A leading organisation at the forefront of microwave and millimetre wave technology is expanding its advanced packaging and assembly capability. With a strong focus on innovation, high performance manufacturing and next generation RF solutions, the business is growing its Process Engineering team to support the industrialisation of emerging technologies. This is an excellent opportunity for an experienced Process Engineer to join a high precision manufacturing environment and contribute to the successful transition of new semiconductor and RF module assembly technologies into stable, scalable and high yield production. Role Description The Process Engineer will evaluate, develop, optimise and control semiconductor and RF module assembly processes, with a particular focus on die attach technologies including silver epoxy, silver sinter and eutectic attach, along with gold wire and ribbon bonding. Working in close collaboration with RF Engineering, the role will support the identification, assessment and advancement of future manufacturing technologies. This ensures that emerging product designs remain manufacturable, reliable and aligned with long term technical objectives. The successful candidate will take responsibility for process robustness, manufacturability, yield improvement and cost efficiency while supporting all elements of new product introduction. Key Responsibilities Technology and Roadmap Support • Collaborate with RF Engineering to identify suitable materials, processes and assembly methods that align with future product requirements., • Evaluate emerging die attach and interconnect technologies that enable higher frequency operation, improved thermal performance and increased power density., • Provide early manufacturability guidance during technology planning., • Assess scalability, automation potential and cost implications., • Lead feasibility trials and proof of concept builds., • Support supplier capability reviews and make or buy considerations. Die Attach Process Development • Evaluate and optimise die attach processes, including silver epoxy, silver sinter and eutectic attach., • Define process windows for temperature, pressure, time and atmosphere., • Create qualification plans and validation methodologies., • Conduct thermal, mechanical and reliability assessments., • Characterise voiding, bond line thickness, shear strength and thermal resistance., • Support material selection and supplier evaluation. Wire Bonding Process Development and Optimisation • Develop and optimise gold ball and wedge bonding processes., • Establish bonding parameters for a range of metallisation and substrate types., • Conduct pull and shear testing with reliability validation., • Address challenges related to intermetallic formation, pad damage and bond integrity., • Support development towards fine pitch and high frequency capable bonding. Manufacturing Process Development • Define, document and control new and existing manufacturing processes., • Develop process flows, standard operating procedures and control plans., • Implement statistical process control and yield monitoring using Cp and Cpk analysis., • Lead root cause investigations using structured methodologies such as 8D, DMAIC and FMEA., • Deliver continuous improvement for yield, cycle time and cost efficiency. New Product Introduction • Lead design for manufacture and design for assembly reviews., • Support prototype and pilot builds with robust validation plans., • Work closely with RF, mechanical, quality and operations teams to ensure manufacturability., • Define tooling, fixturing and automation requirements. Essential Requirements • Degree in Engineering, Materials Science, Physics or a related field., • Experience within semiconductor or RF module assembly processes., • Practical experience with one or more of the following processes: silver epoxy die attach, silver sintering, eutectic die attach and gold wire bonding., • Understanding of materials behaviour, intermetallic formation and thermal management., • Experience with process validation and statistical analysis tools., • Strong problem solving capability within a manufacturing environment., • Methodical, analytical and confident working across both development engineering and production operations., • Proactive, hands on and effective within a fast paced and scaling organisation., • Strong mechanical reasoning and cross functional collaboration skills. Desirable Criteria • Experience in high precision automotive electronics or power electronics with a strong focus on automation, process stability and a zero defect culture., • Background in semiconductor, electronics or high technology manufacturing., • Experience with equipment specification, procurement and commissioning., • Knowledge of RF packaging requirements and JEDEC standards., • Experience with thermomechanical modelling and material reliability testing., • Previous experience within RF electronic production or contract electronics manufacturing., • Knowledge of IATF 16949 or ISO 9001, with training available as required.

CI Project Engineer Currently recruiting for a newly created CI Project Engineer for a food manufacture in the Middlesbrough area. The site is undergoing huge investment and an automaton project, you will work closely with Operations and Engineering teams to deliver projects on time, in budget. Your Role • Leading continuous improvement projects across production, • Identifying inefficiencies and implementing Lean solutions, • Using data to drive smarter decisions and measurable results, • Collaborating with production, quality, and engineering teams, • Championing a culture of continuous improvement What we’re looking for: • Experience in food manufacturing or FMCG, • Strong Engineering Background, • Knowledge of Red Zone advantageous, • Strong knowledge of Lean / Six Sigma (Green Belt a plus!), • A proactive problem-solver who can influence and deliver change, • Great communication and project management skills Role • Monday to Friday, • Based around 8am-4pm - flexibility as per workload, • Life Cover, • Company Pension, • Genuine opportunity to really make a difference Mach are acting as an agent for this role

Electrical Engineer Location:Stockton-On-Tees, but willing to travel on occasion. Salary: £80,000 per annum (negotiable depending on experience) Site based with occasional requirements around the UK to clients terminals. Permanent Start Date: ASAP Job Overview Technical Partners are looking for a knowledgeable and experienced Electrical Engineer to join our clients team as a Subject Matter Expert (SME) for electrical systems and equipment. In this role, you will ensure the safe and reliable operation of our clients electrical systems and assets, provide technical support, and lead various electrical projects, operations, and maintenance activities. What's in it for you? Salary up to £80,000 based on experience and/or chartership. 25 days holiday + bank holidays, rising to 30 days with service Employer contribution 9%, Employee contribution minimum of 5% Annual Performance Bonus Accommodation and company vehicle can be arranged and expenses covered BUPA Healthcare & Health Insurance Westfield Health Cashback Discount voucher scheme Life Assurance, 4 times basic salary Key Responsibilities Electrical Safety: Implement and maintain our clients Electrical Safety Rules, ensuring compliance with current legislation and best practices. Electrical Competency: Serve as the Designated Electrical Competent Person, overseeing competency assessments for site and contractor electricians. Maintenance & Reliability: Plan and manage electrical inspection and preventative maintenance for High Voltage (HV) and Low Voltage (LV) systems, as well as ATEX-certified equipment. Technical Expertise: Apply appropriate electrical engineering standards and codes while managing any deviations, ensuring the best practices are applied across projects. Project Involvement: Review designs, perform electrical calculations, prepare cost estimates, and develop business case proposals for new electrical systems and upgrades. Problem Solving: Provide technical support for troubleshooting, root cause failure analysis, and resolving issues related to electrical systems. Commissioning & Support: Assist with site commissioning of new equipment and systems, including quality assurance reviews and the preparation of commissioning procedures. Site Electrical Equipment: includes Power Transformers, HV/LV Switchgear Air, Vacuum and Oil, HV/LV distribution, ATEX and FLP Motors, Motor Starters, HV/LV VSD's, Soft Starts, UPSs, lighting, trace heating, hazardous area cabling/containment/junction Boxes and Earthing and Bonding systems. Day-to-Day Responsibilities Act as the lead Electrical SME, ensuring timely and high-quality responses to engineering queries from operations and maintenance. Ensure contractors comply with site safety rules and support emergency response teams as needed. Participate in hazard analysis studies (HAZOP) and contribute to safety audits and observation rounds. Develop and manage electrical works within CAPEX and OPEX budgets. Report monthly on key performance indicators (KPIs) related to electrical engineering and maintenance. What We're Looking For Degree in Electrical Engineering/Chartered Engineer status or ideally working towards Chartered Engineer status. Significant experience in designing, installing, and maintaining electrical systems, preferably in a COMAH site or the bulk liquid storage sector. Proficiency in electrical design, including load lists, single-line diagrams, cable sizing, fault level studies, protection grading studies, motor starting calculations and lighting protection calculations. Hands-on experience with site commissioning, troubleshooting, and risk assessment. Competency in managing aging electrical assets and working in hazardous areas. Experience as designated competent person of UK regulations, including Electricity at Work Regulations, DSEAR, PUWER, and COMAH. (SAP) CompEx Ex01-04, CompEx Design (Ex12) (desireable) familiarity with BS 7671 and BS EN 60079. Why Join Us? Our clients offer unique storage solutions for crude, petroleum, chemical, bitumen, liquefied gas and biofuel products. Their terminals are pipeline-connected to local chemical manufacturing facilities and gas processing plants and each facility is an Upper Tier COMAH Site. You'll have the opportunity to lead electrical projects in a dynamic and safety-focused environment. You'll work alongside a talented team while enhancing your expertise in electrical systems and contributing to the safe and efficient operation of our terminals. #jessicaeci

Role: Agricultural Engineer Location: North Yorkshire, Salary: £38,000 - £45,000, Van + Fuel Card + Enhanced Holiday + OT Platinum Recruitment is working with an award winning Agricultural Hire company. This is an opportunity for an experienced Agricultural Engineer ot join the growing team! Benefits for an Agricultural Engineer Enhanced holiday Company sick pay Company pension On-site parking Career progression Bespoke training and developmentResponsibilities for an Agricultural Engineer Repairing and maintaining Agricultural machinery such as Tractors and Combines, Balers, sprayers Perform comprehensive repairs, servicing, and maintenance on agricultural equipment. Support both workshop operations and field service demands. Diagnose faults across mechanical, hydraulic, and electrical systems. Uphold high service standards and provide expert technical advice to customers.Requirements for Agricultural Engineer Full UK Driving licence Can do attitude Ideally have a NVQ Level 3 in Engineering, Plant, HGV or Construction Previous Agricultural experience or Plant experience Other industries considered; Plant / HGV / Powered Access / Generator / Heavy plant / Forklifts / Agricultural Sound like the role for you? We look forward to hearing from you! Click Apply Now and one of the team will be in touch to discuss this Agricultural Engineer based in Warwickshire Don't forget to speak to your consultant about our "Recommend a Friend" referral scheme and find out how you could earn up to £250 per recommendation. Consultant: Mel Dickinson Job Number: (phone number removed) / INDPLANT Job Role: Agricultural Engineer Location: North Yorkshire, Platinum Recruitment is acting as an Employment Agency in relation to this vacancy

Job Title: Refrigeration Engineer Location: Teesside Pay Range/details: £46,791.53 per annum(incl.13 standby payments) Contract Type: Permanent Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer Carry out reactive and planned refrigeration maintenance within agreed timescales. Diagnose faults, identify non-repairable issues and recommend replacements. Complete all PPM, technical and compliance paperwork accurately and on time. Order and fit parts in line with company procedures. Respond promptly to Helpdesk service calls and complete repairs efficiently. Communicate issues affecting store operations to GSMs and build strong working relationships. Complete surveys, reports and job documentation as required. Participate in the out-of-hours standby rota and arrange cover when needed. Working with CO? refrigeration pack systems. Planned on-call rota 1 in 4 weeks (hours of work paid in addition to standby payment) Qualifications & Requirements - Refrigeration Engineer Time-served apprenticeship with NVQ/C&G refrigeration qualification. C&G 2079 / CITB refrigerant handling certificate / F Gas Category 1 Strong refrigeration, electrical, mechanical and diagnostic skills. Ability to read technical drawings and apply relevant H&S legislation. Good communication and customer-facing skills. Self-motivated, professional and able to work at heights using access equipment. Full UK driving licence essential. What we can offer - Refrigeration Engineer 33 Days Holiday (Inc. Bank Holidays). Private Pension. HealthShield Cashback Plan - Reclaim part of your dental/optical costs. OneCity - Employee Discount Platform. Employee Value Awards up to the value of £250. Access to Costco Personal Membership Subscription. Mental and Physical Health Services (Wisdom, Thrive, SkinVision). Electric Car Scheme (Criteria Applies). First Bus Commuter Club - Discounted Bus Travel. For more information on this role, please contact Michael Farrell on 01453 829768 or send a copy of your CV to Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

Due to continued growth, we are recruiting for a Inside Sales professional to join our Teesside-based Customer Service team. This opportunity is ideal for a technically minded sales professional who enjoys managing customer relationships, providing technical product support and delivering commercially sound solutions in a fast-paced, customer-driven environment. Please note a strong Technical understanding of Hydrasun products will be highly beneficial to success in this role. The Role Reporting to the Sales Manager, you will be responsible for managing customer enquiries from initial quotation through to order fulfilment and delivery. You will ensure enquiries are processed accurately, efficiently and compliantly, while maintaining a strong focus on service quality, value for money and customer satisfaction. You will balance speed of response with attention to detail, demonstrating strong planning, prioritisation and accountability while managing a varied workload. Key Responsibilities • Processing technical sales enquiries and preparing accurate, competitive quotations • Providing technical advice on product and supplier selection aligned to customer requirements and Hydrasun strategy • Building and maintaining strong customer relationships to drive enquiry-to-order conversion, margin and revenue • Managing live orders, expediting where required to meet delivery commitments • Reviewing technical specifications and documentation to ensure compliance • Identifying opportunities to add value through additional products and services • Working collaboratively with internal teams across engineering, procurement and operations • Supporting continuous improvement initiatives and contributing to a strong team culture • Adhering to Hydrasun quality, HSEQ and compliance standards at all times What We’re Looking For Essential experience includes a background in technical sales or customer support, strong customer-facing capability, excellent verbal and written communication skills, high attention to detail, strong organisational skills and competence using Microsoft Office applications. A proactive, motivated and flexible approach is critical to success in this role. Desirable experience includes exposure to hydraulic, instrumentation or fluid transfer products, knowledge of fittings, hoses, valves and flanges, basic engineering understanding, ERP system experience and formal sales or customer service qualifications such as NVQ Level 3 in Customer Services. Our Benefits * Private Medical Insurance * Life Assurance * Cycle to Work * Range of Health & Wellbeing packages * Income Protection Scheme Why Join Hydrasun Hydrasun offers the opportunity to work within a market-leading engineering business, a supportive and collaborative team environment, clear development and career progression opportunities, and exposure to technically challenging and rewarding customer projects. For more information regarding this vacancy, please contact our Recruitment Team. Hydrasun is committed to being an equal opportunities employer. Technical Sales Engineer Sales Engineer No agency enquiries or submissions, please

Design & Development Engineer – Staff – Salary + Benefits – Manufacturing – Lancaster Our leading manufacturing client is seeking a Design & Development Engineer on a staff basis. You will lead and support product development, process improvement, and technical activities across the hose department, ensuring products meet specifications, production is optimised, and customer satisfaction is maintained. The role combines hands-on engineering, project management, team leadership, and cross-department collaboration. Key Responsibilities: • Maintain and manage current Bills of Materials (BOMs) within the ERP system, ensuring accuracy, version control, and alignment with approved designs and manufacturing processes., • Plan and run development and improvement projects alongside live production activities, implementing process, product, and efficiency improvements without disrupting operations., • Prioritise and allocate work for a small technical team, balancing short-term production support with longer-term development initiatives., • Deliver installation training courses across the product range, providing technical guidance to internal teams, customers, and external partners., • Make technical and commercial decisions on product quality within the concession process, assessing risk and authorising concessions where appropriate., • Work closely with the Quality department to achieve, maintain, and renew product approvals, ensuring compliance with internal standards, customer requirements, and regulatory or certification bodies., • Contribute to, and where required lead, Lean manufacturing initiatives, driving continuous improvement in efficiency, quality, and process standardisation., • Maintain and control product target specifications across all departments, ensuring alignment between design, manufacturing, quality, and customer expectations., • Work with Supply Chain to validate and approve alternative materials, ensuring continuity of supply without compromising product performance., • Provide technical support to the Customer Services team, assisting with troubleshooting and complex customer issues., • Support investigations into warranty claims, including on-site customer visits, rootcause analysis, and implementation of corrective actions., • Demonstrate strong proficiency in SolidWorks for design, modification, and analysis of products and assemblies., • Apply SolidWorks skills to support plant equipment upgrades and maintenance, including extrusion tooling., • Manage drawing office document control, ensuring all design documentation, revisions, and technical drawings are accurately maintained, version-controlled, and accessible to relevant departments., • Conduct in-house product testing using existing equipment, and design and develop new test equipment as required., • Apply project management skills to ensure all development, production, and improvement activities are delivered on time, within budget, and to agreed quality standards., • Liaise with and contribute to CAPEX projects, providing technical input and ensuring alignment with operational and production requirements., • Write, update, and maintain internal operating procedures, ensuring processes are clearly documented and consistently followed. Qualifications & Experience: • Bachelor’s degree in Engineering, Materials Science, or a related technical discipline., • Strong SolidWorks skills for design, analysis, and plant/equipment modification., • Project management capability with experience managing timescales, budgets, and cross-functional teams., • Strong understanding of Lean manufacturing principles and continuous improvement., • Excellent technical problem-solving and decision-making skills., • Ability to write and maintain clear technical documentation and operating procedures., • Effective communication and training skills for internal teams, customers, and external partners

Background TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of consultancy, training, testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. TUV Rheinland Industrial Services (TRIS), UK are looking for qualified candidates to join the ever-growing team as a Functional Safety Consultant on a permanent basis in either Warrington or Stockton-on-Trent, UK Offices. You will be part of an energetic and driven team and will be expected to work effectively and collaboratively with colleagues on multiple projects in a supportive, progressive environment. Our core company values teamwork, empowerment, integrity and solutions provide our cultural framework and encourage problem solving, decision making, flexibility and responsibility. We have an established competence framework, with regular appraisals and a defined pathway for progression. We strive to foster a friendly and collaborative culture where every employee can contribute to delivering outstanding engineering solutions. Responsibilities: Deliver IEC 61508 / IEC 61511 / IEC 62061 / ISO 13849 functional safety-based SIS and Machinery Safety consultancy and training services Provide specialist level technical support to TUV Rheinland clients on a range of technical queries across the applicable functional safety lifecycle Write technical papers and deliver specialist technical presentations to support TUV Rheinland functional safety service execution and work winning strategies Responsible for development and delivery of technical training related to functional safety, OT cyber security and Machinery safety solutions Build strong relationships with clients, understand their needs and assist in the delivery of tailored, pragmatic solutions. Maintain and enhance customer relationships, securing new opportunities for repeat and new consulting business. Lead assignment tasks, providing regular updates on progress and any challenges faced. Support the financial performance of consulting assignments, monitoring progress vs. costs, ensuring the timely delivery of high-quality services. Ensure compliance with company standards, customer contracts, and industry regulations. Maintain transparency in communication with clients, team members, and management.Requirements: Relevant technical engineering degree preferably in the field of Electrical / Electronics / Instrumentation / Control Systems with knowledge on OT cyber security and ideally chartered Certificated as a minimum to TÜV Rheinland FS Engineer or Exida CFSE status by examination Planning and managing the delivery of projects from proposal to successful delivery and project closure Technical report writing, communicating effectively and managing interfaces with stakeholders (internally and externally) Proactive self-starter, dedicated, innovative, resourceful and analytical with strong problem-solving skills Foster an efficient, innovative and team-oriented work environment. Communicate effectively and confidently with colleagues. Committed to meeting deadlines and upholding high standards Strong commercial and business acumen A genuine passion and desire to enhance company business efficiencyExperience Experience of working in high hazard process industries with a specific focus on safety instrumented systems and/or machine safety Scoping new work and preparing or coordinating competitive bids A recognized industry professional in Functional Safety Management with a minimum of 3 to 10 years’ experience in the key issues relating to the professional application of functional safety management for the design, engineering, operations and maintenance of SIS within an operational engineering environment Demonstratable experience of engaging in a comprehensive range of detailed technical safety related matters covering SIL determination, safety requirements specification design and engineering of SIS and operation and maintenance of SIS Significant knowledge and application of safety related market experience to be able to demonstrate an authoritative understanding of the IEC functional safety compliant relationships between end users, EPC’s, systems integrators and device/machine manufacturers Experience in understanding the requirements for the development of Safety Requirements Specification Preferably having safety engineering knowledge appropriate to the application of E/E/PE Safety Related Systems Demonstrable experience of planning, leading and carrying out functional safety audits and functional safety assessments Relevant experience of delivering technical training to Clients and Stakeholders Demonstrable experience of presenting SIS/Machinery related technical updates / technical solutions and engagement directly both internally and externally with Clients, Stakeholders, Regulatory Bodies, Industry Groups and Academia Preferably a member of any standard’s technical committee such as IEC 61508 or IEC 61511 or a professional membership Having knowledge of IEC 62443 cyber security principles would be an added advantage

Our client is recruiting for an experienced Electrical Engineer to support the safe and reliable operation of electrical systems across multiple assets. Key Responsibilities: Act as Electrical Subject Matter Expert across site operations and projects Lead electrical design and review activities for new installations and modifications Develop HV switching programmes and oversee electrical safety compliance Support commissioning, maintenance, and troubleshooting activities Conduct electrical studies including load flow, fault level, and protection grading Ensure compliance with ATEX, DSEAR, and UK electrical regulations Requirements: Degree-qualified in Electrical Engineering Chartered Engineer status or working towards CompEx (Ex01–04 essential; Ex12 desirable) Experience within COMAH, oil & gas, or chemical sectors Strong knowledge of HV/LV systems and hazardous area equipment Experience in roles such as Authorised Person or Authorising Engineer This role offers the opportunity to take technical ownership of critical electrical infrastructure within a safety-critical environment. To discuss this fantastic opportunity further, please get in touch

Apprentice Maintenance Engineer Salary: £18,897 + Benefits (Increasing annually) Site Location: Marshalls plc, Durham Lane, Eaglescliffe, Stockton-on-Tees, TS16 0PS College Location: Hartlepool College of Further Education, Stockton Street, Hartlepool, TS24 7NT Ever wondered who is behind the UK's most famous landmarks? From the paving in our city centres to the roofs over our heads, Marshalls plc has been leading the way since the 1890s. We are a FTSE 250 Superbrand, but we do more than just manufacture; we create the foundations of the world around us. Our engineering experts are the powerhouses that keep our machines running smoothly, and we are now looking for our 2026 Engineering Apprentices to join our team and help shape the future of Marshalls. We don't just recruit talent; we build it! We have spent the last three years building a proven, structured apprenticeship programme, welcoming 34 ambitious engineers into our team so far. This year, we are expanding even further, hiring 17 new apprentices across the UK. This is a rare and exciting opportunity to join a successful, supportive community and start a career with a company that truly invests in you. So, what's the role? You won't just be watching from the sidelines; you'll be getting stuck into the mechanics and the "brains" behind our production lines. You will learn how to master heavy industrial machinery, ensuring it runs at peak performance while diagnosing and fixing complex issues as they happen. It is not all about heavy lifting, though. You will get to grips with the high-tech electrical and software systems that control our sites. Working alongside our experts, you will find clever ways to improve how we work and help us implement the next generation of technical solutions. By the time you finish, you will have the skills to solve almost any engineering challenge we throw at you. This is a real career path with a clear and supported structure. You will follow a four-year programme delivered in partnership with , combined with hands on mentoring from our site based teams. Year 1: Build your technical skills by attending college 5 days a week at Hartlepool College of Further Education in Hartlepool Years 2 to 4: Hands on Experience at our Eaglescliffe manufacturing site to put your skills into action The Result: Qualify as a Maintenance Engineer with a permanent job Ready to apply? Here's what you'll need: A minimum of 4 GCSEs at Grade 4/C or above, including Maths, English, and Science A strong work ethic and a genuine interest in how things are built and fixed The ability to work in a team as well as on your own You must be able to commute to Hartlepool for your first year and Eaglescliffe for the following three years. Because of our location, having your own transport is highly recommended. Benefits include: 26 Days Holiday + Bank Holidays Guaranteed Christmas holidays On going training and development opportunities 5% employer-matched pension scheme Company uniform Free onsite parking Health care cash plan - support with Dental, Optical, Prescription costs, and many more! Enhanced Maternity, Paternity and Adoption pay and leave Cycle to work scheme Employee discount on Marshalls and Marley products Retailer discounts Marshalls Well-being Centre Share purchase scheme (Minimum age of 18 required for this benefit) Life assurance Equal Opportunities Whoever you are and whatever your background, you'll find a fair and supportive workplace. You're unique and we want you to bring every part of who you are to work, every day. We're committed to ensuring equal opportunities for everyone. To us, this is more than a legal, moral, or ethical necessity - it's the right thing to do! We want our team to reflect the diverse nature of society and the communities we serve. Marshalls is a workplace where you're valued for the contribution you make, and where you can grow and develop by being entirely yourself! More about Marshalls Our operations are organised into three distinct divisions: Marshalls Landscape Products, Marshalls Building Products, and Marley Roofing Products. To find out more about Marshalls visit our website: Links we've shared in this advert: What happens next? You've got until Friday, 24th April 2026, to apply We'll reach out to book in a call. No awkward silences or trick questions, just a chance to see if we have a "spark." We'll chat about what gets you excited about engineering and why this specific role is the right move for you. We'll share more details with you about your salary, the benefits, and what your day-to-day will look like If we're a match, we'll invite you to our site open day. You'll tour the site, meet the team, see the heavy machinery you'll be working on, and get stuck into some group activities to see if the role is definitely for you You'll find out if we're making it official by late July. If you've secured the "Yes," your career officially starts in September

AM Global have an exciting opportunity for a Lead Mechanical Design Engineer to join our large scale engineering client based in Billingham. Preferred Skills & Qualifications Engineering Degree qualification preferably Mechanical 5+ years relevant experience in a Lead Mechanical Engineer role Strong knowledge of the latest engineering standards & codes Clear ability to use Microsoft Office packages, AutoCAD, SolidWorks Strong communication and collaboration skills combined with excellent interpersonal and organisational skills. Experience leading technical projects and small teams. Good analysis, judgement and problem-solving skills along with an ability to input effectively into decision making, with the team Key Responsibilities Managing customer projects from initial concept to handover Review and analyse client specifications in terms of Company’s quotation, scope of supply and commercial terms Generate and check project engineering deliverables such as technical specifications, procurement submittals and handover documentation Prepare Design Qualification (DQ), Installation Qualification (IQ) and Operational Qualification (OQ) for projects including supporting FATs and commissioning. Performing Design Reviews with client/production/engineering department. Inspecting the mechanical build as it progresses and facilitating project communications and reports. Collaborate with cross-functional teams including Operations, Quality, Procurement and Commercial teams to ensure project objectives are met. Oversee project management elements including the commercial aspects of projects from estimating, procurement, through to final close out. Resolve any unexpected technical difficulties and other problems that may arise on projects. Project planning and resource management, Liaise with clients, sub-contractors and inhouse project teams. Mentor and support junior and mid-level engineers through coaching and guidance. Overseeing project quality control and project health and safety matters. Any other functions deemed relevant by your line manager Working hours: Monday to Friday 7am - 3pm - flexible

Due to continuing growth, we require a Mechanical Engineer/ Plant Room Engineer to strengthen the existing Operations & Maintenance team located within the North East Area. As Mechanical Plant Room Engineer you will be working within Energy Centres/ Hospital plant rooms etc.. this plays a crucial role in ensuring the safe, efficient, and reliable operation of mechanical systems that generate and distribute energy (such as heating, cooling, and power) The Company Vital Energi is a leading provider of renewable energy infrastructure and systems to the public and private sectors. We are supporting Hospitals, Universities, New Build developments, Towns and Cities as well as Industrial and Commercial clients to decarbonise their buildings. We have and continue to work on ground-breaking projects throughout the UK which are supporting the UK’s Net Zero targets, such as the recently announced £1 billion low-carbon infrastructure project for Westminster. With plans to double our headcount over the coming years, supported by offices opening in new locations across the country and our strong investment pipeline, coupled with our expansion into new markets such as industrial power generation with our very own Energy-from-Waste facility, there is no better time to join the family here at Vital Energi. Roles and Responsibilities- * Oversee, operate, and maintain mechanical plant equipment (boilers, CHP units, chillers, pumps, valves, heat exchangers, compressors, pipework, etc.). * Perform planned preventive maintenance (PPM) and reactive maintenance to minimize downtime. * Monitor system performance, pressure, flow rates, and energy efficiency. * Diagnose faults in mechanical plant systems. * Carry out corrective repairs or escalate to specialist contractors when required. * Ensure minimal disruption to building/energy centre operations. * Use BMS (Building Management Systems) or SCADA systems to monitor plant operation. * Record and report on system data (temperatures, pressures, energy consumption). * Ensure all works comply with statutory regulations (HVAC, Gas Safe, water hygiene, LOLER, PUWER, etc.). * Carry out risk assessments, method statements, and follow health & safety protocols. * Assist in plant upgrades, refurbishments, and commissioning of new equipment. * Maintain accurate records of maintenance, inspections, and system performance. * Complete job sheets, service reports, and compliance documentation. What you will need * Hold a city & guilds qualification or equivalent * Experience with mechanical seals, bearings and pressurisation units * Full UK manual driving licence The Package: * Salary negotiable DOE * Contributory Company Pension Scheme * Company van/ Fuel card * Non-contributory death-in-service insurance * Employee Assistance Programme * 25 Days Holiday plus 8 days bank holidays. * Additional holidays awarded in line with length of service * Option to purchase/sell additional holidays * Onsite gym/wellbeing centre at our Blackburn Head Office * Discounted gym membership across the UK * EV charging points where possible Applications will be processed within 28 days of receipt. If you have not heard from us within this time period it will mean that your application has unfortunately been unsuccessful. The company is opposed to all forms of discrimination and will select for employment, training and promotion on the basis of suitability for the job and/ or merit. It is company policy that no job applicant or employee receives less favourable treatment than another on the grounds of sex, race, colour, age, ethnic or national origins, political affiliations, religious beliefs, marital & civil partnership status, physical disability, sexual orientation, gender reassignment, pregnancy & Maternity related or is disadvantaged by unjustifiable conditions or requirements. Applicants must have the unrestricted and ongoing right to work in the UK for the duration of employment, without the need for sponsorship. Due to the nature of this role, we are unable to support visa sponsorship or employ individuals with time‑limited permission or conditions attached to their right to work in the UK Notice to Agency and Search Firm Representatives: Vital Energi Utilities Ltd is not accepting unsolicited CVs from agencies and/or search firms for this job posting. CVs submitted to any Vital Energi Utilities Ltd employee by a third party agency and/or search firm without a valid written & signed search agreement, will become the sole property of Vital Energi Utilities Ltd. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you

Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector?. Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems an

Operations EngineerShrewsbury, UKAbout EdinaEstablished in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions.

Protein Works is a market-leading nutrition brand with a clear mission - and the marketing function is genuinely at the centre of growth.This is a new role, which means you'll define it.You'll have direct access to senior decision-makers, a team that moves fast, and a brand with real cut-through in

Fire Alarm Engineer - Sub-ContractorLooking for an experienced Fire Alarm Engineer, who is setup for subcontract working, to take on a rolling service maintenance contract across a social housing providers blocks of flats in the South East of London area. To apply for this role you must be an experi

FieldServiceInstallationsEngineer-RetailSecuritySystems.

Operations Engineer – Wastewater (New Developments / S104 / Inspector) Title: Operations Engineer – Wastewater Location: Remote (UK-wide travel) Salary: Up to £55,000 + Company Car + Benefits About the Role Join a leading NAV utility provider as a Wastewater Operations Engineer, responsibl

Experience in systems integration, field engineering, or technical operations for complex deployments. Technical Operations Engineers sit at the intersection of technology and real-world mission environments. Capture operational feedback and collaborate with internal engineering teams to drive produ

PPRO is seeking a highly motivated and experienced Security Operations Analyst to join our dynamic and growing security team. This role has scope and freedom to get involved in lots of different areas surrounding security operations in a dynamic, cloud-native environment. Contribute to the developme

A leading beauty and wellness platform in London is seeking a Senior IT Operations Engineer to oversee IT infrastructure and support. Ideal candidates will have extensive IT operations experience and knowledge of Google Workspace.

A leading AI technology company in Greater London is seeking a Senior Security Operations Engineer responsible for managing and securing cloud environments. They will also work to develop secure architectures and streamline access control, collaborating with IT and engineering teams.

A leading engineering manufacturer in High Wycombe is hiring a Production Engineer to support its manufacturing operations. The ideal candidate holds a degree in Engineering and has experience in a manufacturing environment.

A leading energy solution provider seeks a Senior Electrical Design Engineer in Bury St Edmunds.

A financial services firm seeks an Information Security Operations Engineer to enhance its security posture. Candidates should have a strong background in Linux, Cloud infrastructure, and Security Operations with at least five years of relevant experience.

We’re looking for a motivated Data Operations Engineer to join STRATOS – someone early in their career who is excited to work behind the scenes on a complex, high-impact B2B SaaS platform. As a Data Operations Engineer, you’ll play a critical role in the operational backbone of STRATOS. ETL pi

A leading tech placement firm is seeking a full-time remote professional to connect CRM systems and automate tasks to enhance productivity.Ideal candidates will have experience with CRMs, proficiency in no-code platforms, and strong analytical skills.This role offers the flexibility to work from any

Cloud & Security Operations Engineer.

A global network solutions company is seeking a Network Operations Engineer to operate and maintain network infrastructure.

We are an engineering led company and we’re looking for people who are will be excited by the potential for Engine’s technology to transform banking in different markets around the world. To support our growth, we are looking for talented and motivated SOC engineers to join our foundational in-h

Tower Research Capital, a high-frequency proprietary trading firm founded in 1998, seeks a Trading Operations Engineer to join one of our trading teams. Applying programmatic solutions to scale and expand trading operations. Contributing to the automated trading operations codebase.

Senior Electrical Design Engineer – Bury St Edmunds. Ready to power the future? Join UK Power Networks as a Senior Electrical Design Engineer!.

A tech startup specializing in neuromonitoring is seeking an IT Operations Engineer to oversee the daily delivery and improvement of IT services. Ideal candidates will have over 4 years of experience in IT operations, strong knowledge of Google Workspace, and expertise in network management.

As a Graduate Security Operations Engineer you'll have a broad scope of responsibilities, building a strong understanding of the product and business operations to support clients and internal teams with software deployments across the full sales cycle. Graduate Security Operations Engineer Start Ju

Operations Engineer (Enercon)Department:EngineeringCountry:United KingdomCity:United Kingdom - Remote Working## Description* * Experience in an operations or engineering support role w

Facilities Operations Engineer. The Multi Skilled Maintenance Engineer will maintain, install, and refurbish fabric and the equipment across the GBS UK estates portfolio. This role may require travel to other GBS UK campuses and demands flexible working to accommodate business operations.

A leading automotive technology company is seeking an experienced Infrastructure Operations Engineer to join their IT team in Silverstone.

Create and deploy standard practices for Engineering Operations Technicians, Chief Engineers, and vendor support teams. Train and support the Engineering team in providing electrical and mechanical equipment troubleshooting and operations. Bachelor Degree in electrical or mechanical engineering or e

A global scientific software company is seeking a Scientific Cloud Ops Specialist.The ideal candidate will have over 5 years of experience in Pharma/Biopharma environments and possess strong technical skills in AWS, Linux, and Python.This role involves installing and administering software, troubles