Aerospace engineering jobs in Anaheim, California - Page 2Create job alerts

• Job Identification 116935, • Job Category Operations, • Posting Date 04/13/2026, 07:17 PM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Shift: CNC Programmer ' 1st Shift Position Overview: We're seeking a CNC Programmer to join our team in Fullerton, CA. The CNC Programmer is responsible for developing, optimizing, and maintaining CNC programs for precision aerospace fittings manufactured from barstock and forgings. Materials include stainless steel, aluminum, titanium, and high-strength alloys. This role ensures programs are efficient, repeatable, and compliant with aerospace quality standards (AS9100) while supporting on-time delivery and cost objectives. Key Responsibilities: ' Develop CNC programs for multi-axis mills and lathes (3 and 5-axis machines). ' Optimize cycle times while maintaining dimensional integrity and surface finish requirements. ' Troubleshoot machining issues and revise programs to improve yield and reduce scrap. ' Support first article inspections (FAI) and AS9102 documentation requirements. ' Collaborate with Quality to resolve nonconformances and implement corrective actions. ' Provide technical guidance to CNC Machinists and Setup Technicians. ' Maintain program documentation, revision control, and backup systems. ' Support lean manufacturing and continuous improvement efforts. Ensure compliance with safety procedures and company policies. , Basic Qualifications ' Associate degree or technical certification in CNC Programming, Manufacturing Technology, or related field. ' 5+ years of CNC programming experience in aerospace manufacturing. ' Experience machining aerospace fittings or tight-tolerance components preferred. ' Strong experience with; 3 axis machining, 5 axis simultaneous machining and CNC turning operations. ' Proficient in CAM software (Edgecam, Mastercam). ' Experience with Fanuc and Okuma CNC controls. ' Strong understanding of GD&T. ' Familiarity with: AS9100 quality systems, First Article Inspection (AS9102) and NADCAP requirements (if applicable). ' Ability to read and interpret complex Engineering documents. ' Strong understanding of cutting parameters and tool life management. ' High attention to detail and quality, ability to work in a fast-paced aerospace production environment. ' Strong collaboration and communication skills and process improvement mindset. ' Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116861, • Job Category Operations, • Posting Date 04/09/2026, 05:47 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None Summary: This position is involved directly in the inspection of product after final processing. This position procures samples for dimensional inspection of aerospace parts to ensure conformity to customer drawing requirements. This position requires review of the customer drawing, measurement of the part using various types of calibration gages such as a micrometer, caliper, comparator, Keyence IM, drop gage, height gage, Go/No-Go gages, etc. Use of precision inspection tools and equipment, ability to read blueprints and procedures are required in the daily activities to ensure acceptance of product to specifications and requirements. Involvement in other inspections, such as, but not limited to, creating non-conforming material reports, receiving inspection and 3rd party certificate of conformance review. Knowledge and Skills: • Performing appropriate sampling plan per customer requirements, • Dimensional Inspection and Acceptance, • Visual Inspection and Acceptance, • Receiving Inspection and Acceptance, • Review of 3rd Party Certification of Compliance Documentation, • Supporting Quality in the recall of gages and tools, • Review of Manufacturing Router, • Prepare quality documentation including but not limited to dimensional inspection reports and logbooks for product acceptance, • Prepare non-conformance reports for Quality and Engineering evaluation, • Use hand tooling such as micrometers, microscopes, calipers, and thread gages, • Use sampling plans, drawings, work instructions, industry standards and specification to verify conformance of product acceptance., • Other duties and/or responsibilities may be performed as part of cross-training or employee development plan., • 3-5 years related quality experience or training in accordance with the defined skills training matrix progression, or equivalent combination of education and experience., • Prior experience in a Quality Inspector, • Ability to read and interpret documents such as safety rules, operating instructions, and procedures manuals, • Ability to write routine reports and correspondence, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent., • Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts., • The noise level in the work environment is usually moderate; however, it may be occasionally loud enough where hearing protection is required. The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $23.86 to $40.57 per hour , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 117007, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Part time Position Overview: The Engineering Intern effectively assists Manufacturing Management with various productivity initiatives and special projects. Key Responsibilities: • Work together with floor personnel to gather samples and discover methods to improve tool quality and efficiency., • Create work instructions where needed., • Manage and organize multiple priorities., • Identify opportunities for improvement and innovation., • Coursework towards Bachelor's degree in Mechanical, Manufacturing, or Electrical Engineering., • Junior or Senior standing preferred., • Strong interpersonal and communication skills., • Must be detail oriented., • Strong computer skills (Microsoft Office ' Word, Excel, Access, Powerpoint)., • Knowledge of manufacturing and engineering processes.

• Job Identification 116344, • Job Category Engineering, • Posting Date 02/24/2026, 01:09 AM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None, • LinkedIn Recruiter Tag #LI-LB1 We are seeking highly motivated and energetic students for the 2026 summer intern program at Howmet Fastening Systems. The program consists of 10-12 weeks of structured hands-on training involving plant tours, seminars, networking events, and projects selected to add direct value to the business. At the conclusion of the program, interns will present their projects to plant managers, supervisors, and mentors. An internship at Howmet Fastenings Systems will provide an invaluable experience that you can utilize in any roles, and it's Howmet Aerospace's goal to evaluate our interns for potential entry-level openings. This position will report directly to the site's Engineering Manager with daily coaching from the team's leaders, engineers, and technicians. The Howmet Aerospace Summer Internship Program will include engaging in impactful projects to assist the company and the student's professional development. * Categorize nutforming tooling for Top 35 dies. * Create or modify tooling layouts for nutforming and formax dies. ADDITIONAL REQUIREMENTS: • Able to work full time, onsite for a minimum of 12 consecutive weeks beginning in May or June 2026, • Able to provide own transportation for position at Fullerton, CA, • Must be enrolled in a bachelor's degree or graduate degree program in an engineering discipline by the start of employment., • Minimum completion of Sophomore level coursework from an accredited institution., • Experience with Microsoft Office Suite (Excel, Word, Teams, etc.). Must be proficient working in a Microsoft systems environment. Excel is required. SolidWorks or equivalent 3D modeling is required. • Basic 5S recommended., • Prior Internship work experience, • Strong verbal and written communication skills

• Job Identification 116948, • Job Category Engineering, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time As a Manufacturing Engineer III at our Fullerton, CA location, you'll be part of our engineering team working as an onsite employe. This role develops, evaluates and enhances manufacturing methods for aerospace machined components, utilizing knowledge of product design, materials, fabrication processes, lean principles, assembly methods and quality control standards.''' Key Responsibilities: ' Support manufacturing processes to ensure safety, quality, and efficiency. ' Assist with creating and maintaining work instructions, routers, and standard operating procedures. ' Support process changes, validations and shop-floor improvements. ' Participating in NPI, FAI, and Continuous Improvement Projects. ' Collects and analyzes basic manufacturing data (cycle time, scrap rate, yield). ' Reviews and implements manufacturing drawing and engineering change notices. ' Support Cost-Reduction and Efficiency initiatives. Participates in PFMEA, Process Capability, and RCCA studies , Basic Qualifications ' Bachelor's degree in Engineering in Mechanical, Industrial, or Manufacturing Engineering (OR equivalent hands-on relevant experience will also be considered). ' 3+ years of engineering experience. ' Strong knowledge of CNC manufacturing and aerospace standards. ' Experience with AS9100 and NADCAP standards. ' Knowledge of GD&T, fixturing and gaging methods. ' Statistical process control experience in the aerospace industry. ' Basic Computer Skills: Microsoft Office Suite products, and strong knowledge of Solidworks or other modeling software. ' Experience in metal manufacturing, especially using titanium and/or nickel based superalloys. • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. ' The base pay range for this position in California is $79,100.00 - 110,700.00/year. Pay is based on market location and may vary depending on job-related knowledge, skills, and experience. A sign-on payment may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116977, • Job Category Supply Chain, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time Position Overview: The Manager, Supply Planning will lead the end-to-end supply planning process to ensure optimal production, inventory, and supply network performance. Key Responsibilities: ' Develop, implement, and continuously improve supply planning processes, ensuring alignment with business objectives and customer requirements. ' Lead S&OP (Sales & Operations Planning) activities and drive supply network planning to optimize inventory and service levels. ' Own the master supply plan, translating demand forecasts into actionable production and inventory strategies. ' Oversee production planning and scheduling, ensuring efficient resource utilization and timely order fulfillment. ' Collaborate with manufacturing and operations teams to resolve constraints and balance capacity with demand. ' Manage supply network planning across multiple sites, suppliers, and distribution centers. ' Execute Rough-Cut Capacity Planning (RCCP) to assess capacity requirements and proactively address bottlenecks. ' Monitor and optimize inventory levels, minimizing excess and obsolescence while maintaining service targets. ' Analyze inventory trends and implement best practices for stock management. ' Drive planning excellence through standardized processes, metrics, and continuous improvement initiatives. ' Mentor and train team members on best-in-class supply planning principles and tools. ' Partner with cross-functional COE teams to deploy advanced planning systems and analytics. ' Apply fundamental supply planning principles to maintain control and drive decisions during times of uncertainty or disruption. Ensure transparency, prioritize critical supply needs, and communicate effectively with stakeholders under pressure. , Basic Qualifications: ' Bachelor's degree in Supply Chain Management, Business, Engineering, or related field; Master's preferred. ' 7+ years of experience in supply planning, production planning, or related supply chain roles. ' Strong experience in supply network planning, RCCP, and inventory management. ' Experience in a planning Centre of Excellence (COE) or similar process improvement environment highly preferred. ' Proficiency with advanced planning systems (SAP, Oracle, Kinaxis, etc.) and analytics tools. ' Demonstrated ability to lead in fast-paced, ambiguous environments. Exceptional communication, stakeholder management, and problem-solving skills. APICS/ASCM certification (CPIM, CSCP) a plus. ' Deep understanding of supply planning principles and their application in complex, dynamic environments. ' Ability to remain focused, decisive, and effective when facing supply chain disruptions or uncertainty. ' Strong analytical mindset with a passion for continuous improvement and operational excellence. Collaborative leadership style, fostering teamwork and knowledge sharing. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 117335, • Job Category Executive, Services and Support, • Posting Date 05/05/2026, 07:09 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None This is an opportunity to grow your career at a large, international aerospace company. The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), a 401(k)-matching program, and paid holidays and vacation. Howmet Fastening Systems (HFS) holds the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aero engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Headquartered in Torrance, CA; we employ over 6,000 people in 11 countries at 32 locations. HFS is a business unit of Howmet Aerospace (NYSE:ARNC). Summary Responsible for managing programs, policies and practices related to environmental, health and safety compliance, Wastewater Plant, emergency & evacuation, loss prevention, and workers' compensation. Acts as the facility coordinator and primary contact for internal customers and external agencies for all matters pertaining to Wastewater Plant, and environmental, health & safety. Manages and directs the wastewater Plant team. Performance Objectives: • Oversees all aspects of Environmental, Health and Safety administration. Drives proactive safety programs, as well as promote and influences positive safety practices and behaviors., • Develops, recommends and implements programs to assure compliance with all applicable local, state and federal regulations including documentation, reporting, permits, manifests, training, and policy development. Coordinates and manages all on-site hazardous materials., • Develops and administers EH&S training and communication programs (HAZCOM, HAZMAT, confined space, personal protective equipment, SDS, Job Safety Analysis, etc.)., • Participates in new hire orientation., • Facilitates contractor safety orientation programs., • Leads and facilitates the plant safety committee., • Prioritizes and directs all facility and maintenance activity. Coordinates workload, scheduling and activities of facilities and maintenance team. Provides direct supervision and manages performance for facilities and maintenance team members., • Acts as the primary contact for facility and grounds security and access. Acts as the emergency evacuation coordinator for the facility., • Interfaces with vendors, external agencies, plant, division and corporate contacts regarding various initiatives, programs and practices., • Demonstrate continual focus on improvements and enhancements., • Helps to ensure that quality and standards for the department are adhered to and maintained., • Bachelor's degree in Safety, Health or Occupational Health & Safety, Engineering or Environmental, • 5-7 or more years of experience in the field of Environmental, health and safety or 5 years of EHS field experience, with managerial and project management experience preferred in EHS preferred., • Employees must be legally authorized to work in the United States. Verification of employment. eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Minimum of five to seven years' experience facilitating and managing environmental, health and safety programs in manufacturing plus three years managing or coordinating Wastewater treatment facilities., • Must have broad knowledge of local, state, and federal programs and regulations relating to EH&S. Must be experienced in safety and environmental inspection and audit processes., • Previous experience in acquisition of permits and interaction with regulators is favorable., • Prior experience leading continuous improvement projects and programs is necessary., • Must have excellent organizational, communication, presentation, and persuasion skills. Physical Demands: • Must be able to lift/move 30 lbs. (may not exceed per EHS policies)., • Must be able to stand for long periods of time., • Must be able to wear a respirator., • Must be able to wear Safety toe shoes, hearing protection, safety glasses., • Must be able to not wear loose clothing. This position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $140,000 to $180,000. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

Job Description Emerald Technologies has an exciting opportunity for two Hand Solderer I's to join its Brea, CA team! The Hand Solderer I is an entry-level role responsible for performing basic hand soldering and assembly operations on Printed Circuit Board Assemblies (PCBAs) and subassemblies. This position focuses on developing soldering skills, following detailed instructions, and ensuring compliance with IPC Class 2 standards. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the Hand Solderer I: • Perform routine hand soldering of thru-hole., • Assemble and rework PCBAs according to documentation and work instructions., • Conduct basic visual inspection of solder joints to identify common defects (bridges, cold joints, etc.)., • Maintain accurate AEGIS and Shop Floor logs and follow established production processes., • Escalate issues to senior solderers or supervisors for troubleshooting., • Follow all ESD, safety, and company quality procedures. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Hand Solderer I: • High School Diploma or equivalent required., • 0–1 year of soldering or assembly experience (manufacturing or hobbyist experience considered)., • Ability to read and follow work instructions in English., • Strong attention to detail and willingness to learn., • IPC-610 and/or J-STD-001 Certification preferred but not required., • Good hand/eye coordination required. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Morning Shift (1 Shift Total) Shift Hours: Monday–Friday, 6:00 AM – 2:30 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Second Shift (1 Shift Total) Shift Hours: Monday–Friday, 2:30 PM – 11:00 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law Breaks Meal Break (First Shift): One 30‑minute unpaid meal break, typically scheduled around 10:30 AM – 11:00 AM. Meal Break (Second Shift): One 30‑minute unpaid meal break, typically scheduled between 6:30 PM – 7:00 PM. Rest Breaks: Two paid 10‑minute rest breaks per shift, in compliance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job Description Emerald Technologies has an exciting opportunity for seven Conformal Coat Operator I's to join its Brea, CA team! The Conformal Coat Operator I plays an important role in protecting and finishing printed circuit boards (PCBs) and electronic assemblies by applying specialized protective coatings. This entry‑level position is ideal for individuals looking to build hands‑on experience in electronics manufacturing, focusing on learning core coating processes, operating equipment safely, and maintaining strict quality and process standards under guided supervision. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the Conformal Coat Operator I: • Prepare PCBs and electronic assemblies for coating by performing masking, cleaning, and fixture setup with precision., • Operate manual spray, dip, and basic automated coating equipment under established procedures and direction., • Support material preparation by mixing and handling conformal coating products according to documented instructions., • Conduct detailed visual inspections under UV lighting to verify coating coverage and identify defects., • Maintain clear, accurate production logs, quality records, and process documentation., • Adhere to all safety, ESD, and chemical‑handling protocols to ensure a controlled and compliant work environment., • Communicate defects, process deviations, or equipment issues promptly to the supervisor for resolution. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Conformal Coat Operator I: • High school diploma or equivalent required., • 0–1 year of experience in electronics manufacturing or a similar production environment preferred., • Ability to read, understand, and follow detailed work instructions and process documentation., • Strong attention to detail with steady manual dexterity for handling small components., • Basic computer literacy and accurate data‑entry skills., • Willingness to learn and adhere to established manufacturing standards and industry guidelines, including IPC‑A‑610 and J‑STD‑001. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Second Shift (2 Shifts Total) Shift Hours: Monday–Friday, 2:30 PM – 11:00 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law Breaks Meal Break: One 30‑minute unpaid meal break, typically scheduled between 6:30 PM – 7:00 PM. Rest Breaks: Two paid 10‑minute rest breaks per shift, in compliance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia designs, manufactures, and services a wide range of products, that include mission equipment, thermal management systems, engine technology, and propellers. The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview This is a union position covered under a collective bargaining agreement. Starting pay $25.00, per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. Location: Anaheim, CA (Onsite) Shift: Monday-Friday, 6:00am – 2:30pm Pay: $25.00 per hour The Stockroom Specialist will be responsible for putting inventory items away in proper location in a VLM machine and shelving/racks. In this role, you will utilize ERP system to manage the flow of materials and adhering to standard process procedures for issuing materials to shop work orders and engineering parts requests. Maintain proper labeling and bins to support stockroom movement of materials. What You’ll Do • Build part kits from inventory for each product line and issue replacement parts as required., • Participate in regular inventory counts and audits to maintain accurate stock levels and report of any discrepancies and assist in reconciling inventory records., • Organize product in the stockroom, ensuring proper labeling and categorization. Maintain a clean and orderly stockroom to facilitate easy access., • Follow all safety guidelines and protocols, including proper handling of hazardous materials and the use of safety equipment, to maintain a safe working environment., • Maintain tools, materials, and the work area in a clean and organized condition., • Perform other duties as assigned by management. Who You Are • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • High School Diploma or GED, with a minimum of 1 year of Aerospace or Automotive industry experience. Graduation from an Aerospace or Automotive technical program can substitute for experience., • Prior experience in stockroom or warehouse operations is preferred but not mandatory., • Ability to lift, bend, and stand for extended periods due to the nature of the job., • Strong attention to detail, excellent analytical skills, and problem-solving abilities., • Ability to work effectively in a team environment, taking direction from experienced peers, leads, and supervisors., • Strong communication, organizational, and intermediate computer skills., • Basic computer skills for data entry and inventory tracking. What’s In It for You • This position is part of union, offering negotiated benefits and protections. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job Description POSITION SUMMARY Composite Technician is a hands-on role, whose primary responsibility is performing a wide variety of composite plying, layup, fabrication, and assembly tasks. Additionally Composite Technician Level will be responsible for the mentoring and training of Level I and II composite technicians. POSITION DUTIES/RESPONSIBILITIES · Engineering blueprint interpretation · Read and interpret work instructions and work orders. · Mold surface preparation and maintenance. · Composites material kitting. · Perform lamination of pre-preg and wet Lay-up of composite materials. · Assemble multi-piece/complex molds to yield conforming composite structures. · Perform vacuum bagging operations of large composite structures. · Complete trimming operations, yielding close tolerances, using fixtures and various hand tools. · Performs composite lamination using VRTM & RTM techniques. · Performs composite lamination using wet layup techniques. · Lamination of complex structures using smart tooling techniques · Assist management in the mentoring/training of production employees. REQUIRED QUALIFICATIONS · High attention to detail: Multiple pieces makes up the overall layup of parts. Each must be placed accurately and oriented correctly. Must be able to quickly spot and address flaws in raw material. · Hand dexterity/coordination: Job requires a lot of specific finger movements and hand layup techniques. · Organization: Must be able to keep track of various parts during process · Cleanliness: Parts can be sensitive to foreign materials, must be able to keep a clean workspace. · Safety-Minded: Team needs people who are putting safety first and realize how important it is to take care of certain machinery/equipment. · Writing Comprehension: Important to be able to read and comprehend the work instructions and job orders that will be handled. · Computer Literacy: Team members will have to use several computer interfaces to record and manage production as they layup production parts. · Advanced level engineering blueprint interpretation · Resin Infusion, wet layup and smart tooling work experience is a must. EDUCATION AND EXPERIENCE Education: High school diploma or equivalent Experience: Must have 1-3 years of composite experience (Required) PHYSICAL DEMANDS N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Position requires activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Position requires activity more than 66% of the time (5.5+ hrs/day) Lift/Carry • 10 lbs or less O, • 11-20 lbs O, • 21-50 lbs O, • 51-100 lbs N, • 12 lbs or less O, • 13-25 lbs O, • 26-40 lbs O · Must be able to lift and carry items weighing up to thirty-five (35) pounds on a repetitive basis. · Must be able to stand, walk, bend, squat, climb, kneel, twist and work at heights on an intermittent basis for up to twelve (12) hours. · Requires hand manipulation including simple grasping, pushing, and pulling of materials. · Must be able to reach and work above and below the shoulder level. · Must be able to work with and around forklifts and hazardous machinery. · Visual acuity skill to detect any flaws in the parts being inspected. · Ability to wear Personal Protective Equipment (PPE) - Required Safety Glasses WORK ENVIRONMENT This position requires an on-site presence. Working conditions are normal for a manufacturing environment and may be noisy at times. Work may require occasional weekend and/or evening work. The company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate. Benefits: • 401(k), • 401(k) 3% Match, • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Retirement plan, • Vision insuranceCompany DescriptionApex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.Apex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.

Job Description For over fifty years, Custom Power has been a leader in the design and manufacturing of specialized battery packs and advanced battery management systems. Serving key industries such as medical, aerospace, defense, and industrial, we deliver high-quality, innovative solutions to our clients. As an ISO 9001, AS9100, and ITAR-registered company, Custom Power maintains the highest standards of quality and precision in everything we do. We are currently seeking a dedicated and detail-oriented Production Assembler to join our team. This position plays a critical role in assembling battery packs and battery management systems according to precise specifications and quality standards. The successful candidate will work hands-on with various components and tools, following assembly instructions, blueprints, and technical documents. Attention to detail, adherence to safety protocols, and commitment to quality are essential in this role. From your first day with Custom Power, your success will be our top priority. You will receive support and guidance from your team, ensuring you have the resources you need to thrive. This role will offer hands-on experience in logistics, providing opportunities to grow within our dynamic organization. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following. Other duties may be assigned as needed. • Assembly of Products: Assemble battery packs and battery management systems by following blueprints, work instructions, and assembly guides to ensure accurate and consistent production., • Component Handling: Handle and position small components, wires, and connectors with precision and care to prevent damage and ensure proper alignment., • Use of Tools & Equipment: Operate hand tools, power tools, and specialized equipment to complete assembly tasks efficiently and safely., • Quality Control: Conduct inspections of in-process and completed assemblies to ensure compliance with quality standards., • Soldering & Wiring: Perform basic soldering and wire routing as required for assembly., • Documentation: Record assembly data, complete production checklists, and maintain accurate documentation of work performed., • Adherence to Safety Protocols: Follow all safety procedures and wear appropriate personal protective equipment (PPE) to maintain a safe working environment., • Inventory Management: Notify supervisors of low stock or the need for replenishment of components, ensuring production timelines are met., • Problem Solving: Identify issues with parts, materials, or processes and communicate with supervisors to resolve them promptly., • Equipment Maintenance: Conduct basic cleaning and maintenance of assembly tools and equipment to ensure functionality and longevity., • Cross-Department Collaboration: Work closely with Quality Control, Engineering, and Production Supervisors to address any production challenges and maintain workflow., • High school diploma or equivalent, • 1+ years of experience in production assembly, electronics assembly, or manufacturing, • Ability to read and interpret blueprints, technical drawings, and assembly instructions, • Proficiency in using hand tools, power tools, and specialized assembly equipment, • Strong attention to detail and ability to follow precise instructions, • Basic soldering experience is preferred but not required, • Ability to perform repetitive tasks with precision and maintain focus for extended periods, • Effective communication skills, both written and verbal., • Must be able to work effectively in a fast-paced, team-oriented environment., • Ability to stand, bend, and work with small components for extended periods, • Must be able to lift up to 25 lbs. as needed, • Proficiency in basic computer applications This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description For over fifty years, Custom Power has been a leader in the design and manufacturing of specialized battery packs and advanced battery management systems. Serving key industries such as medical, aerospace, defense, and industrial, we deliver high-quality, innovative solutions to our clients. As an ISO 9001, AS9100, and ITAR-registered company, Custom Power maintains the highest standards of quality and precision in everything we do. We are currently seeking a dedicated and detail-oriented Production Assembler to join our team. This position plays a critical role in assembling battery packs and battery management systems according to precise specifications and quality standards. The successful candidate will work hands-on with various components and tools, following assembly instructions, blueprints, and technical documents. Attention to detail, adherence to safety protocols, and commitment to quality are essential in this role. From your first day with Custom Power, your success will be our top priority. You will receive support and guidance from your team, ensuring you have the resources you need to thrive. This role will offer hands-on experience in logistics, providing opportunities to grow within our dynamic organization. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following. Other duties may be assigned as needed. • Assembly of Products: Assemble battery packs and battery management systems by following blueprints, work instructions, and assembly guides to ensure accurate and consistent production., • Component Handling: Handle and position small components, wires, and connectors with precision and care to prevent damage and ensure proper alignment., • Use of Tools & Equipment: Operate hand tools, power tools, and specialized equipment to complete assembly tasks efficiently and safely., • Quality Control: Conduct inspections of in-process and completed assemblies to ensure compliance with quality standards., • Soldering & Wiring: Perform basic soldering and wire routing as required for assembly., • Documentation: Record assembly data, complete production checklists, and maintain accurate documentation of work performed., • Adherence to Safety Protocols: Follow all safety procedures and wear appropriate personal protective equipment (PPE) to maintain a safe working environment., • Inventory Management: Notify supervisors of low stock or the need for replenishment of components, ensuring production timelines are met., • Problem Solving: Identify issues with parts, materials, or processes and communicate with supervisors to resolve them promptly., • Equipment Maintenance: Conduct basic cleaning and maintenance of assembly tools and equipment to ensure functionality and longevity., • Cross-Department Collaboration: Work closely with Quality Control, Engineering, and Production Supervisors to address any production challenges and maintain workflow., • High school diploma or equivalent, • 1+ years of experience in production assembly, electronics assembly, or manufacturing, • Ability to read and interpret blueprints, technical drawings, and assembly instructions, • Proficiency in using hand tools, power tools, and specialized assembly equipment, • Strong attention to detail and ability to follow precise instructions, • Basic soldering experience is preferred but not required, • Ability to perform repetitive tasks with precision and maintain focus for extended periods, • Effective communication skills, both written and verbal., • Must be able to work effectively in a fast-paced, team-oriented environment., • Ability to stand, bend, and work with small components for extended periods, • Must be able to lift up to 25 lbs. as needed, • Proficiency in basic computer applications This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Aerospace Mechanical Assembler – 2nd Shift Job Description This role focuses on high-volume, repetitive mechanical and electronic assembly work in a fast-paced military and defense production facility in Santa Ana, CA. You will assemble and test mechanical assemblies, wire harnesses, junction boxes, and related components using a variety of hand and power tools, while following blueprints, wiring diagrams, and detailed assembly instructions. This is a 2nd shift position (2:30 p.m.–11:00 p.m.) with regular opportunities for overtime during the week and on Saturdays. Responsibilities • Perform repetitive mechanical assembly of high-quality mechanical assemblies, wire harnesses, test racks, junction boxes, and associated components according to engineering drawings and work instructions., • Use common hand tools and power tools such as pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, multimeters, and test boxes to assemble and verify components., • Read and interpret blueprints, schematics, and wiring diagrams to complete assemblies accurately and efficiently., • Perform hand soldering and component fabrication as required for electronic and electromechanical assemblies., • Carry out validation and testing of electronic components using equipment such as multimeters, oscilloscopes, network analyzers, RF test systems, and test racks., • Inspect assemblies and components for quality, ensuring they meet specifications and standards before moving to the next stage of production., • Troubleshoot electronic box assemblies, PCBA assemblies, and RF systems, and document issues by writing clear and detailed issue tickets for failures., • Run functional checkouts and tests on completed assemblies, identify issues discovered during these processes, and work to diagnose and resolve them., • Apply common air-frame construction techniques such as installing rivets, mechanical fasteners, nut plates, and similar hardware when required., • Work productively in a high-paced production environment with a goal of contributing to a team output of approximately 5,000 units per month., • Rapidly adapt to changing roles and responsibilities based on production needs while maintaining high quality and safety standards., • Use computers for standard browser tasks, word processing, documentation, and test or assembly-related software as needed., • Communicate effectively in verbal and written form with engineering, production, and other team members to clarify requirements, report issues, and support continuous improvement., • Follow all safety procedures, including the use of required personal protective equipment such as steel toe or composite toe footwear., • At least 2 years of experience working in a manufacturing environment, such as aerospace, electronics, or medical device production, performing mechanical assemblies., • Strong proficiency with common hand tools and power tools, including pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, and multimeters., • Ability to read and interpret blueprints, schematics, and wiring diagrams and follow detailed assembly instructions., • Working knowledge of common electrical components and their functions within assemblies., • Proficiency using computers for standard browser tasks and word processing applications to support documentation and communication., • Ability to perform repetitive mechanical assembly work while maintaining accuracy, consistency, and attention to detail., • Capability to work effectively in a high-paced, production-driven environment with demanding output goals., • Strong troubleshooting skills for mechanical, electronic, and PCBA assemblies, including diagnosing and resolving issues discovered during testing., • Effective verbal and written communication skills for collaboration with engineering and production teams., • Ability to rapidly change roles and responsibilities based on shifting priorities and production needs., • Ability and willingness to work 2nd shift hours (approximately 2:30 p.m.–11:00 p.m.) and to support overtime and weekend work when needed., • Experience in aerospace, electronics, or medical manufacturing environments., • Hands-on experience with mechanical assembly in a repetitive, high-volume production setting., • Experience performing hand soldering and component fabrication for electronic assemblies., • Familiarity with electronic box assembly and troubleshooting, including documenting issues through detailed tickets., • Experience performing validation and testing of electronic components using multimeters, oscilloscopes, network analyzers, RF test systems, and test racks., • Experience in common air-frame construction techniques, including installing rivets, mechanical fasteners, and nut plates., • Experience with PCBA (printed circuit board assembly) testing and troubleshooting., • Ability to perform inspection tasks to verify assembly quality and conformance to specifications. You will join a rapidly growing organization that offers long-term stability, ongoing training, and clear opportunities for professional growth. The company invests in its people with strong benefits and the potential for equity once you move into a direct role, allowing you to share in the organization’s success. You will work in a modern, well-supported facility where your contributions directly support meaningful, cutting-edge projects, and you will be part of a team-focused culture that values continuous improvement and skill development. Work Environment This position is based in a clean, modern military and defense manufacturing facility in Santa Ana, CA. You will work on 2nd shift (approximately 2:30 p.m.–11:00 p.m.), with regular opportunities for weekday and Saturday overtime depending on production needs. The environment is fast-paced and production-driven, with a team goal of producing around 5,000 units per month. You will use a wide range of hand and power tools, precision measuring instruments, soldering equipment, and electronic test equipment such as multimeters, oscilloscopes, network analyzers, RF test systems, and test racks. The facility is part of a large, growing organization that is expanding and has secured funding to build a new facility, offering a sense of long-term growth and investment in infrastructure. Steel toe or composite toe safety shoes or boots are required as part of the on-site safety attire. Job Type & Location This is a Contract to Hire position based out of Santa Ana, CA. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Summary We are seeking a Manufacturing Engineer with 3-5 years of experience to join the Sustainment Manufacturing Engineering Team (Split Shift 11am-8pm). This role focuses on developing and optimizing manufacturing processes, with a strong emphasis on lamination, metal deposition, coatings of acrylic-based applications. The ideal candidate will be eager to grow in a fast-paced aerospace environment and demonstrate foundational proficiency across core manufacturing engineering competencies. Job Responsibilities Process Development & Optimization \n • Support implementation of APQP and AS9145 methodologies.\n, • Assist in developing PFMEAs, control plans, process flow diagrams*, and validation protocols.\n, • Contribute to first article inspection (FAIR*) and ensure AS9102 compliance.\n, • Apply strict clean room protocols and SPC analysis (Cp/Cpk*) to critical processes.\n, • Support development and troubleshooting of:\n, • Lamination (composite or adhesive-based)\n, • Metal deposition (Vacuum Metalizing, thermal spray, plating, or additive processes)\n, • Coatings (functional, protective, or aesthetic)\n, • Interpret engineering drawings and contribute to tooling design and CAD* modeling (Siemens NX preferred).\n, • Assist in creating and maintaining work instructions and revision control.\n, • Support MRB/PRB activities and nonconformance disposition*.\n, • Participate in internal/external audits* and layered process audits.\n, • Contribute to Lean projects* and capital/tooling implementation.\n, • Apply root cause analysis tools (DMAIC, 8D, Fishbone, 5-Whys*) to resolve issues.\n, • Collaborate cross-functionally to align stakeholders and support project execution.\n, • Present technical findings and support project tracking/reporting.\n\n Job Qualifications \n • Bachelor's degree in Aerospace, Mechanical, Electrical, Chemical Engineering, or related field.\n, • 3-5 years of experience in Manufacturing Engineering, preferably in aerospace or regulated environments.\n, • Exposure to lamination, metal deposition, coatings, or acrylic-based manufacturing processes.\n, • Familiarity with APQP, AS9145, PFMEA, SPC, and FAIR* documentation.\n, • Working knowledge of ISO9000, AS9100*, or D1-9000 quality systems.\n, • Fluent in English (written and spoken).\n, • Must be a U.S. Person per ITAR regulations.\n, • Willingness to travel domestically and occasionally internationally (<5%).\n\n Preferred Qualifications: \n • Experience with Teamcenter PLM, ECNs, and CAD* tools (Siemens NX preferred).\n, • Exposure to clean room protocols and MSA techniques.\n, • Understanding of Design for Manufacturability and Characteristics Matrix.\n, • Participation in Lean initiatives or Six Sigma training.\n, • Strong time and priority management* skills.\n, • Ability to communicate technical concepts to diverse audiences.\n\n Compensation Data Annual Salary: $91,000.00 - $114,000.00

Job DescriptionDescription: The Machinist – Milling Specialist supports aerospace manufacturing by operating CNC and manual milling equipment to produce high-precision components that meet strict FAA, AS9100, and customer-specific aerospace requirements. This role ensures accuracy, quality, and compliance with all industry standards while contributing to a safe and efficient production environment. Requirements: Edit programs, set up, and operate complex CNC machines, including multi-axis mills and multi-tasking mill-turns (Mazak, WFL). • Work with ultra-precision tolerances (±.0005” or tighter) on complex aerospace components., • Select proper tooling, fixtures, cutting parameters, and machining strategies for aerospace components., • Perform tool offsets, adjustments, and changeovers to maintain precision within tight tolerances., • Inspect parts using calipers, micrometers, gauges, CMM data, and other aerospace-approved metrology tools., • Maintain documentation for AS9100 compliance, including traceability and production records., • Conduct routine preventative maintenance and ensure machines operate at optimal levels., • Identify machining issues and collaborate with engineering and quality teams to resolve discrepancies., • Maintain a clean, organized workspace aligned with 5S and continuous improvement practices., • Follow all safety procedures and regulations applicable to aerospace manufacturing. Requirements Qualifications Education & Experience: • High school diploma or GED required; technical training in machining preferred., • Minimum 2-4 years of milling or precision machining experience, preferably in aerospace manufacturing., • Experience in machine aerospace materials and working to AS9100 or FAA standards strongly preferred Skills & Competencies: • Strong knowledge of milling operations, tooling, feeds, and speeds., • Ability to read complex aerospace drawings and GD&T requirements., • Proficiency with precision measuring equipment and inspection documentation., • Strong attention to detail and commitment to producing flight-critical components., • Ability to work independently and collaborate across production, quality, and engineering teams. Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance Qualifications • High School diploma AND Associate Degree or completed trade school study relevant toward CNC machine manufacturing., • 5-axis CNC milling machines controls, retrieve and run programs experience, • 5+ years experience with close tolerance CNC Milling Machines manufacturing: machine operation, programming, and cutting tool selection and maintenance, • CNC cutting tools (reamers, end mills, boring bars, taps, drills) experience, • Standard Operating Procedures experience, • Familiarity of G & M Code programming techniques (Heidenhain, Mazatrol) experience preferred, • Ability to read and understand blueprints and GD&T experience., • Measuring equipment experience (micrometers, calipers, gauge pins, go/no-go gauges, etc.)., • Previous race or production engine assembly or rebuilding experience, • Previous Aerospace or Defense industry experience (Deburr, and/or Assembly)Responsibilities:, • Collaborate with Manufacture Engineering to optimize machining processes, • Assist maintenance personnel with the diagnosis and correction of machine tool geometry, • Follow the production schedule and proactively verify machines are configured correctly, • SOPs and drawing set up instructions, load castings & raw materials, • Ensure all machines are running in accordance with the daily published schedule, • Perform required daily maintenance activities on assigned CNC machine, • Coordinate with the QC department to validate part quality from QC reports, • Document machine and automation robot issues, • Retrieve and/or build cutting

Job DescriptionDescription: Who We Are Advanced Cooling Technologies, Inc. (ACT) is a leading provider of thermal management solutions and engineered structures serving Defense, Aerospace, HVAC, Power Electronics, and medical markets. Guided by our core values of Innovation, Teamwork, and Customer Care, ACT supports commercial and government customers through technical excellence and operational discipline. Job Summary The Composite Layup Technician is responsible for fabricating composite parts through accurate placement, orientation, and bonding of materials into molds or tooling in accordance with engineering drawings, ply books, work instructions, and quality requirements. This role focuses on the pre-cure manufacturing phase of composite components. Essential Duties and Responsibilities • Perform hand layup of composite materials, including prepregs, fabrics, adhesives, and films, • Cut, kit, and stage materials per job requirements, • Follow ply books, travelers, engineering drawings, and work instructions, • Ensure proper fiber orientation, ply sequence, material placement, and part configuration, • Apply resins, adhesives, and bonding films as required, • Perform vacuum bagging, debulking, and preparation for curing processes, • Maintain material handling controls, including freezer life, out-time tracking, and cleanliness requirements, • Inspect work for conformity to specifications prior to cure, • Complete required manufacturing and quality documentation, • Adhere to safety, environmental, and quality system requirements, • Support rework and continuous improvement activitiesRequirements:, • Ability to read and interpret engineering drawings, ply books, and work instructions, • Strong attention to detail and manual dexterity, • Understanding of composite materials, fiber orientation, and lamination techniques preferred, • Ability to work in controlled environments, including PPE requirements, • Basic math and measurement skills, • High school diploma or equivalent required, • Prior experience in composite layup, aerospace manufacturing, or related field preferred, • On-the-job training may be provided for entry-level candidates, • Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee.) ACT offers competitive pay, excellent benefits (medical, dental, vision, paid time off, holidays, company-paid life & disability insurance, 401(k) match, and profit-sharing), and a supportive team environment. ACT is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected characteristic. ACT participates in E-Verify. California Applicants: ACT collects personal information for hiring purposes. California residents may have rights under the CCPA/CPRA. Contact HR at .

Propulsion Engineer - Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $60 - $125 per hour A bit about us: With numerous offices across the country we are an industry leading Space Development company. We specialize in the design, manufacture, integration, and test of critical spacecraft components. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications. If you are an experienced Mechanical / Propulsion Engineer looking to develop cutting edge products, then please apply! Why join us? Do you want to work with some of the nation’s best Clients like NASA and Boeing? We do too! • Meaningful Work!, • Best in Class Firm!, • Gold Level PPO Heath Insurance - 75% Covered!, • Competitive Compensation Package!, • Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: As a Mechanical Propulsion Engineer, your responsibilities will include: 1. Leading the technical development for mechanical subsystems, including propulsion., 2. Providing propulsion subsystem technical expertise and guidance to the engineering team., 3. Performing technical risk assessment and mitigation for space-based mechanical and propulsion subsystems., 4. Working closely with other engineers and scientists to design, analyze, and test propulsion systems., 5. Using mechanical design and analysis tools to create effective and efficient propulsion systems., 6. Collaborating with cross-functional teams to ensure the successful integration of propulsion subsystems into the spacecraft., 7. Staying updated on the latest advancements and trends in propulsion technology and incorporating them into our systems where applicable., 8. Documenting all stages of the design and development process for future reference and improvement. Qualifications: To be considered for the role of Propulsion Engineer, you must possess the following qualifications: 1. A Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. A Master's degree or higher is preferred., 2. A minimum of 7 years of experience in propulsion engineering or a related field., 3. Demonstrated experience providing propulsion subsystem technical expertise., 4. Proficiency with mechanical design and analysis tools., 5. A solid understanding of Geometric Dimensioning and Tolerancing (GD&T)., 6. Excellent problem-solving skills and the ability to think critically and creatively., 7. Strong communication and teamwork skills, with the ability to work effectively in a collaborative environment., 8. A passion for space exploration and a commitment to contributing to the future of the space industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

• Job Identification 116920, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time Shift: CNC Machinist ' 2nd shift Position Overview: We are currently seeking a CNC Machinist, 2nd Shift, to join our team! Key Responsibilities: ' Manufacture products in accordance with Engineering drawings. ' Adhere to all department and Company quality standards. ' Check product dimensions utilizing proper equipment. ' Refer any issues regarding the CNC Lathe area to senior leads or supervisors. ' Assure compliance to all department and Company quality standards. ' Record, as required, all productivity on Company system. ' Clean and maintain machinery according to department and Company standards. ' Adhere to all Company safety regulations. , Basic Qualifications: ' A minimum of 1 year or more of operation experience with CNC Lathes (such as Okuma, Takisawa, Swiss, Doosan, etc.). ' Ability to learn to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC or OSP (Okuma) controls. ' The ability to communicate in English (reading, writing, and speaking). Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 117001, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time As a Manufacturing Operations Manager, you'll be part of our Industrial team working as an onsite employee at our Fullerton, CA location.' Key Responsibilities: ' Run a safe, injury/accident-free workplace. ' Responsible for daily management and leadership of all resources assigned.' Typical responsibilities include but are not limited to: Schedule adherence, productivity, personnel development, time and attendance, training and establishing/monitoring departmental goals. ' Creates a departmental cross training matrix and mentors assigned personnel. ' Deploys team members to both strategically and tactically engage in cross functional problem solving to improve production efficiencies and product quality. ' Ensures the organization accomplishes Safety, Quality, Schedule, and Cost performance objectives. When misses occur, develops a credible recovery plan with team. ' Review daily demand, production capacity and constraints, optimize production schedules, and manage the workflow through shop. ' Manage Key Performance Indicators (KPI's) and other reporting on daily basis to drive performance in all assigned areas. ' Direct and coordinate manufacturing activities based on policies, company objectives and programs spanning multiple manufacturing functions. ' Coordinate with Supply Chain for procurement or required tools and MRO, and planning delivery schedules to meet delivery schedules, quality standards while reducing overall lead time and cost. Coordinate with Engineering and Quality Control to determine cause of rejected product and to resolve discrepancies in manufacture process. , Basic Qualifications ' Bachelor's degree in Manufacturing Engineering, Operations Management, or a combination of appropriate related work experience and education/training. ' Extensive experience with CNC equipment, programming, tooling and fixturing. ' 6+ years of progressive manufacturing leadership experience and responsibility. Aerospace and/or Automotive experience preferred. ' Proven track record of driving results in a high volume, high mix machining environment. ' Expert ability to read and interpret blueprints, methods of manufacturing, machine code, tabular data and other related technical documentation. • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. ' 6+ years of progressive manufacturing leadership experience and responsibility in the Aerospace and/or Automotive industry. Salary Range: The base pay range for this position in California is $105,400.00 - 165,000/year. Pay is based on market location and may vary depending on job-related knowledge, skills, and experience. A sign-on payment may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116956, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Shift: Maintenance Technician - 2nd shift, 3:30pm - 12:00am Position Overview: As a Sr. Maintenance Technician, you'll be part of our team located in Fullerton, CA. Key Responsibilities: ' Ensure the effective operation of plant machinery by executing preventive maintenance tasks, including adjustments on motors, conveyors, control systems, and various production machines. ' Utilize advanced troubleshooting techniques to identify root causes of problems through observation and systematic analysis. ' Program, set up, and fine-tune CNC machine control systems and human-machine interfaces (HMIs). ' Conduct repairs on high-voltage systems (480V, 220V, 120V) and low-voltage circuits, as well as hydraulic and pneumatic components. ' Maintain comprehensive documentation for preventive maintenance activities, equipment specifications, and repair records. ' Collaborate with engineering and production teams to implement equipment modifications and enhancements. ' Mentor and provide guidance to junior maintenance staff, fostering skill development. ' Maintain an organized inventory of replacement parts and tools to ensure prompt repairs. ' Uphold rigorous adherence to all safety standards and protocols, actively participating in safety training. Follow established written specifications, procedures, and drawings to execute tasks effectively. , Basic Qualifications ' This position requires a minimum of a high school diploma or general education degree. ' A minimum of 5 years of experience in maintenance mechanics, focusing on CNC machinery. ' Strong knowledge of CNC programming languages (G-code, M-code) and various control systems (Fanuc, Siemens, Haas, etc.). ' Expertise in troubleshooting and repairing electrical, electronic, hydraulic, and pneumatic systems. ' Proven ability to interpret complex diagrams, manuals, and technical specifications. ' Familiarity with analytical tools and methodologies related to PLC and electrical systems. ' Exceptional problem-solving, analytical, and critical thinking capabilities. ' Strong mechanical skills and dexterity. ' A commitment to safety practices and continuous improvement. ' Ability to work independently and collaboratively within a team environment. • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. ' A minimum of (5) years of relevant industrial experience in a manufacturing environment is preferred. ' Certification in CNC machine maintenance or programming. ' Familiarity with predictive maintenance methodologies and tools. ' Knowledge of Industry 4.0 advancements and data-driven maintenance approaches. ' Experience with documentation processes for maintenance procedures and product equipment. ' Ability to read and understand detailed instructions and specifications. Experience with various welding techniques (TIG, MIG) is a plus. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Job DescriptionAbout The Company Our client is a globally recognized manufacturer of high-precision engineered components and systems, serving the aerospace, defense, and specialty industrial markets. Rooted in a proud tradition of production excellence, the organization has earned a distinguished reputation for delivering quality, dependability, and forward-thinking solutions. The company is privately owned with a strong values-based culture, operating several manufacturing and engineering centers across the globe. It partners with top-tier OEMs and leading suppliers on some of the most technically demanding programs in the industry. The organization blends the resilience of an established enterprise with the responsiveness and ambition of a fast-growing manufacturer. The Role Our client is seeking a Director of Operations - Precision Components to step into a pivotal leadership position overseeing several operating divisions within the business. This is an outstanding opportunity for a seasoned manufacturing leader who has a track record of managing complex, geographically distributed operations. The role is based onsite and involves routine travel across the company's manufacturing locations. Key ResponsibilitiesOperational Management • Champion continuous improvement and operational excellence initiatives across all manufacturing locations, • Oversee production efficiency, supply chain performance, and process enhancement efforts, • Hold full P&L ownership for designated business units, driving financial results, cost control, and margin growth, • Guarantee adherence to all applicable regulatory standards and industry quality certificationsStrategic Development, • Partner with engineering, sales, and program management teams to drive innovation and accelerate time-to-delivery, • Craft and implement business strategies aligned with broader enterprise goals to fuel long-term, sustainable growth, • Pursue opportunities for expanding into new markets, acquiring new customers, and forming strategic alliancesTeam Leadership, • Cultivate a culture rooted in accountability, teamwork, and servant leadership principles, • Champion talent development initiatives, succession planning, and the strengthening of organizational capabilities, • Attract, mentor, and grow high-performing teams spread across multiple facilitiesFinancial Oversight, • Uphold disciplined financial management, including precise budgeting and forecasting, • Communicate operational outcomes and strategic recommendations to the executive leadership team with confidence and clarity Education: • An advanced business degree (MBA or similar) is strongly preferred, • Proven success operating within highly regulated, quality-intensive manufacturing environments, • Significant expertise in precision machining, engineered systems, or component manufacturing, • Prior experience in aerospace or defense manufacturing is required, • Demonstrated effectiveness in senior operational or general management roles carrying full P&L responsibility, • Skilled at converting operational data and metrics into actionable strategic insights, • Proficiency in Lean manufacturing, Six Sigma, and other continuous improvement frameworks, • Paid time off, family leave benefits, and relocation assistance, • 401(k) retirement plan, • Full health, dental, and vision insurance package, • Annual performance-based bonus, • Competitive base salary aligned with experience (range: $250,000–$300,000) Equal Employment Opportunity and Non-Discrimination Policy Equal Employment Opportunity Statement: Both Keller Executive Search and our clients are Equal Opportunity Employers. For all positions, whether with Keller Executive Search or our clients, qualified applicants will receive consideration for employment without regard to race, skin color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran status, disability, genetic information, or any other legally protected status. Commitment to Diversity: Keller Executive Search and its clients are committed to fostering a diverse and inclusive work environment where all individuals are valued and respected. Reasonable Accommodations: Both Keller Executive Search and our clients are committed to providing reasonable accommodations to individuals with disabilities and pregnant individuals. We engage in an interactive process to determine effective, reasonable accommodations. Compensation Information: For client positions, compensation information is available in the job post. If not provided, it will be shared during the interview process in accordance with applicable laws. When required by law, salary ranges will be included in job postings. Actual salary may depend on skills, experience, and comparison to current employees in similar roles. Salary ranges may vary based on role and location. Compliance with Laws: Both Keller Executive Search and our clients comply with federal, state, and local laws governing nondiscrimination in employment. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Workplace Harassment: Both Keller Executive Search and our clients expressly prohibit any form of workplace harassment based on race, skin color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. E-Verify Participation: Keller Executive Search and/or our clients may participate in E-Verify. Information about E-Verify participation will be provided during the application process where applicable. Privacy and Pay Equity: • Colorado, Nevada, New York City, California, and Washington Residents: Compensation information is available in the job post or will be provided during the interview process if not initially available., • Rhode Island: We do not request or require salary history from applicants., • Connecticut: We provide wage range information upon request or before discussing compensation. Use of Artificial Intelligence in Recruitment Keller Executive Search and our clients may use artificial intelligence (AI) tools to assist in the recruitment and candidate evaluation process. These tools are used exclusively to support human decision-making by helping to review and assess candidate qualifications and materials. AI is never used to automatically reject, disqualify, or make final hiring decisions about candidates. All AI-assisted evaluations are reviewed by experienced recruitment professionals, and all hiring decisions are made by qualified human recruiters. Our use of AI is designed to enhance fairness, consistency, and efficiency while maintaining our commitment to equal employment opportunity and non-discrimination principles. Genetic Information: In accordance with federal and state laws, both Keller Executive Search and our clients do not discriminate based on genetic information. We do not request or require genetic information from applicants or employees, except as permitted by law. Local Laws: Both Keller Executive Search and our clients comply with all applicable local laws and ordinances regarding employment practices in the areas where we operate. Note: This job posting may be for a position with Keller Executive Search or one of our clients. The specific employer will be identified during the application and interview process. Employment laws and requirements may vary depending on the employer and location.

Job Description Emerald Technologies has an exciting opportunity for a Flying Probe Test Technician to join our Brea, CA team! The Flying Probe Test Technician programs, sets up, and operates automated flying probe test equipment to verify and diagnose PCB assemblies (PCBAs). This role is hands‑on, technical, and critical to ensuring product quality—requiring strong troubleshooting skills, component‑level analysis, and the ability to isolate faults across both analog and digital circuits. At Emerald Technologies, each employee plays a meaningful role in building innovative products for a wide range of industries. Come work in a supportive, collaborative team environment where the work is impactful and career growth has no limits. Responsibilities of the Flying Probe Test Technician: • Program, set up, and operate automated flying probe test equipment for PCBA verification., • Perform component‑level troubleshooting and root‑cause analysis on analog and digital circuits., • Execute detailed test procedures and multi‑step test sequences with accuracy and consistency., • Analyze and document test results, escalating recurring issues and recommending corrective actions., • Collaborate with Test Engineering, Manufacturing, and Quality teams on debug activities and yield improvements., • Conduct testing on both production units and returned goods (RMA)., • Maintain equipment, fixtures, and a clean, organized work area while following ESD and safety practices. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Flying Probe Test Technician: • Education or experience in electronics. High School Diploma required; technical degree or equivalent hands‑on experience preferred., • Experience troubleshooting PCB assemblies at the component level (analog and digital circuits)., • Ability to read and interpret schematics, PCB layouts, and component datasheets., • Hands‑on experience with electronic test equipment such as DMMs, oscilloscopes, and power supplies., • Familiarity with flying probe test systems (programming or operating experience preferred)., • Strong attention to detail and disciplined documentation practices, including adherence to ESD and safety standards., • Effective problem‑solving skills with the ability to follow structured debug methods. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Shift Hours: Monday–Friday, 2:30 PM – 11:00 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job Description The Director of Quality is responsible for the strategic and operational leadership of Interconnect Solutions Company’s Quality Management System across all operations. This role has enterprise-level accountability for quality performance, regulatory compliance, supplier quality, and customer satisfaction while supporting a fast‑paced, high‑mix manufacturing environment. In this role, you will serve as the senior quality authority for the organization and a key partner to Manufacturing, Engineering, Supply Chain, Sales, and customers. You will ensure quality systems are effective, scalable, and aligned with business objectives, balancing compliance, risk management, customer expectations, and operational agility through sound, risk‑based decision‑making as the company continues to grow. What You'll Do: Quality Leadership & Management • Lead, develop, and manage Quality Engineers, Supplier Quality, Inspection/FAI, and Quality Analytics teams., • Establish quality objectives and performance metrics aligned with company and customer requirements., • Foster a strong quality culture focused on ownership, prevention, accountability, and continuous improvement., • Own the design, implementation, and continuous improvement of the Quality Management System (QMS)., • Ensure compliance with applicable standards and certifications, including:, • ISO 9001, • AS9100, • Lead internal audits, management reviews, customer audits, andcertification audits., • Ensure robust inspection, First Article Inspection (FAI), validation, and acceptance processes., • Own supplier quality programs, including supplier qualification, audits, performance monitoring, and corrective actions., • Serve as the primary senior quality interface for customers during audits, visits, and quality escalations., • Lead investigation, root cause analysis, and resolution of customer quality issues., • Ensure corrective actions are effective, timely, and designed to prevent recurrence., • Define and track key quality metrics to identify systemic risks and opportunities., • Lead continuous improvement initiatives using structured problem‑solving methodologies., • Drive reduction of cost of poor quality (COPQ) while improving yield, reliability, and customer satisfaction., • Use data and analytics tools to support decision‑making and performance visibility. Must-Have Qualifications: • Bachelor’s degree in Engineering, Quality, Manufacturing, or a related technical field., • 10+ years of progressive quality experience in a manufacturing environment., • 5+ years of experience in a leadership or people management role., • Demonstrated ownership of a Quality Management System in a certified manufacturing organization., • Strong experience leading audits, corrective action programs, and regulatory or customer compliance efforts., • Experience partnering cross‑functionally with Operations, Engineering, and Supply Chain leadership., • Proficiency with Microsoft Office tools; strong Excel skills required. Bonus Points If You Have: • Advanced degree (MBA or MS in Engineering or related field)., • Experience inhigh‑mix,fast‑turnmanufacturing environments., • Background in interconnects, electronics, automotive, aerospace, medical devices, consumer electronics, or other regulated manufacturing industries., • ASQ certifications (CQE, CQA, CMQ/OE), Six Sigma certification, or Lead Auditor credentials., • Experience with APQP, PPAP, IPC‑620, AS9102 First Article Inspection, and customer‑specific quality requirements., • Familiarity with quality data and visualization tools such as Power BI.

Job Description Position Summary • On a production basis, performs precision mechanical assembly work, which is typically of high complexity and/or requires fitting, alignment, and the adjustment of components, units, and assemblies to very close tolerances., • Performs integrated next-level assembly work on machined/fabricated aerospace parts at a floor station., • Assembles fabricated parts at a floor station using and or performing: Riveting, Cold Working, Nut Plates, Bearings, Bushings, Cold Bonding, Fabricating and installing Shims, Sealing, Bucking/Squeezing Rivets and Grounding Blocks for integrated next-level assemblies., • Tests and calibrates parts and mechanisms to meet tolerances and product specifications., • Ensures conformance to established procedures and quality level of Arden Engineering’s Quality Policy and conformance to Customer Engineering and Specifications., • Accomplishes various production assembly functions that are somewhat complicated in nature., • Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams., • Uses hand tools and power tools to assemble units according to product specifications using jigs and templates when required., • Positions parts in specified relationship to each other under extremely close tolerance conditions., • Fastens parts together using an Orbital Riveting machine., • Loads and unloads previously setup machines such as arbor presses, drill presses and milling machines., • Identifies units that fail tests or tolerance levels and repairs as necessary. Trouble-shoots and reworks production items that do not meet specifications., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Familiar with a variety of the field's concepts, practices, and procedures., • Relies on extensive experience and judgment to plan and accomplish goals., • Performs a variety of complicated tasks., • Some degree of creativity and latitude is expected., • Works under immediate supervision., • May be required to meet certain certifications in field., • Requires at least 2 years of experience in the field or in a related area of precision mechanical assembly experience., • Working knowledge of shop math and geometry., • The ability to read and interpret complex drawings and documents for machined parts and assemblies highly desired., • Preferred experience in Riveting, Cold Working, Nut Plates, Bearings, Bushings, Cold Bonding, Fabricating and installing Shims, Sealing, Bucking/Squeezing Rivets and including but not limited to Grounding Blocks for integrated next-level assemblies., • Preferred knowledgeable in the use of various power-hand tools, drills, jigs, templates, boring and bucking equipment., • Good communication skills with the ability to work with others with a positive attitude., • Standard safety training., • Ability to drive and operate a forklift., • General Physical Requirements: Standard physical requirements to include the ability to sit and stand for multiple hours at a time; Able to sit and stand for multiple hours at a time; Reaching walking; Pulling, pushing, lifting 50 lbs. or less; Atmospheric conditions, oils/coolants.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity: The Assembly Potting Operator performs a wide variety of electrical/mechanical product assembly operations on components, assemblies or subassemblies. What You'll Do: • Prepares assembly work by reviewing various documents including production work orders, manufacturing and process specifications, engineering drawings and schematics, • Works with masking and unmasking materials in preparation for process, • Ability to fluently read, write and speak English, • Attention to detail and accuracy, • Ability to work well under pressure, • Excellent communication and interpersonal skills, • Experience working with chemicals and solvents in a manufacturing or assembly environment, • High level of flexibility and adaptability to changing requirements and priorities, • Monday to Friday - 1st and 2nd shifts available, • 1st Shift (7:30am to 4:00pm), • 2nd Shift (4:00pm to 12:30am), • Full-Time / Permanent Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description M.R. Mold & Engineering Corp. for 37 years has specialized in tight-tolerance, flash less LSR, rubber and plastic prototype, production, and micro injection molds for medical and dental applications, including implantables, masks, and hearing aid products. Other industries served include aerospace, consumer products, and fluid handling. We are currently looking for an experienced CNC Lathe programmer/operator in the Orange County area. Responsibilities: • Setting up own work, programming, and operating CNC lathe., • Must be able to read, interpret, and follow CAD models and blueprints, • Setting up and programming machines for unattended night runs., • Must be capable of monitoring machine performance (i.e., tool wear, cycle time, product quality, etc.) and identify and correct any issues Qualifications: • Experience setting up own work, programming, and operating CNC lathe., • Experience with tight tolerance machining preferred., • Mastercam experience is required., • Experience with tooling speeds and feeds necessary to meet quality and production standards., • Knowledge of raw materials, cutting tool geometry and tolerances, • Knowledge of precision inspection equipment and methods (micrometers, calipers, etc.), • Job shop experience preferred., • Strong basic math/shop math skills, • Ability to work with minimal supervision Compensation and Benefits: • 80% paid medical insurance, • Dental and Vision offered, • 10% match for employee 401K contributions, • Paid Holidays and Vacation

Job Description A well‐established manufacturing organization is seeking an experienced Supply Chain Manager to oversee all aspects of materials planning, procurement, inventory control, and supplier management. This role is ideal for someone who thrives in a fast‐paced production environment and enjoys building efficient, scalable systems. Key Responsibilities • Lead materials planning, purchasing, and inventory management to support production schedules, • Develop and maintain accurate demand forecasts and inventory levels, • Optimize supply chain processes to reduce costs and improve efficiency, • Manage vendor relationships, negotiate pricing, and ensure on‐time delivery, • Implement and monitor KPIs related to materials flow, accuracy, and performance, • Collaborate with production, engineering, and finance teams to align materials strategy, • Ensure compliance with quality, safety, and regulatory standards, • 5+ years of experience in materials management, supply chain, or related field, • Strong understanding of MRP/ERP systems (SAP, Oracle, or similar), • Proven track record of reducing costs and improving materials flow, • Excellent analytical, organizational, and communication skills, • Experience in manufacturing, aerospace, automotive, medical device, or similar industries preferred, • Competitive compensation package, • Comprehensive benefits, • Opportunity to lead a key function within a stable, growing organization This position is offered by a confidential employer. More details will be shared with qualified candidates during the interview process.

Job Description Design West Technologies Inc. (DWT) is a leading provider of cutting-edge aerospace and military technologies. With a commitment to excellence and innovation, we specialize in designing, manufacturing, and delivering high-performance solutions for our clients worldwide. Our team comprises passionate professionals dedicated to pushing the boundaries of what is possible in aerospace and defense. We are seeking a dynamic Electronics Manufacturing / Process Engineer to drive operational excellence in PCB assembly and electronics production. Position Overview: The Electronics Manufacturing / Process Engineer is responsible for developing, improving, and sustaining SMT, through-hole, box build, and electronic assembly processes. This role focuses heavily on SMT/PCBA process engineering, line optimization, yield improvement, defect reduction, and new product introduction (NPI) support. The ideal candidate is a hands-on problem solver with strong engineering discipline who thrives in a fast-paced, high-mix, low-to-medium volume manufacturing environment Job Duties: SMT / PCBA Process Engineering • Optimize SMT production processes including solder paste printing, stencil setup, pick-and-place programming, reflow profiling, selective soldering, and hand assembly, while developing, validating, and maintaining programs for printers, SPI, AOI, and pick-and-place equipment., • Improve manufacturing performance by driving higher first-pass yield, reducing defects, and increasing throughput across electronic assembly lines., • Create and maintain manufacturing documentation including work instructions, process flows, setup sheets, tooling documentation, and routers., • Design and improve fixtures, tooling, and workstation layouts while analyzing line balance, labor efficiency, bottlenecks, and capacity., • Lead manufacturing readiness from prototype to production, including pilot builds, tooling, stencil design, and feeder setup., • Drive root cause corrective actions using tools such as 8D, 5 Why, Fishbone, Pareto, SPC, and Lean methodologies to resolve manufacturing issues and reduce defects, rework, scrap, and process variation in partnership with Quality., • Bachelor's degree in Engineering (Manufacturing, Mechanical, Electrical, Industrial)., • 5+ years of experience in electronics manufacturing/EMS or PCB assembly with strong knowledge of SMT processes, equipment (pick-and-place, AOI, SPI, reflow, stencil printing), and test processes., • IPC certifications (IPC-A-610, IPC J-STD-001 or related) preferred., • Experience in defense, aerospace, or other highly regulated electronics manufacturing environments, including mixed-technology assemblies. Join a growing U.S. manufacturer supporting national security missions with products that matter. You will have the opportunity to directly impact factory performance, manufacturing capability, and the delivery of mission-critical systems to customers who depend on them.

Job Description Position Summary The Programmer role is to aid the engineering department by using computer software to program various machines. Essential Duties and Responsibilities • Utilizes CATIA V5 software to develop programs to control contour-path machining of metal parts on 3 through 5 axis machine tools., • Provide and create tool designs and concepts to achieve end item product build and production rate working within engineering and quality specifications., • Ensures conformance to established procedures and quality level., • Policy and conformance to Customer Engineering and Specifications., • Analyzes drawings and part design data to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates, according to knowledge of machine shop processes, part specifications, and machine capabilities., • Create computerized setup documents, including all tool requirements and CNC programs., • Continuous improvement of Cutting methods to reduce cost, and improve quality., • Utilize CAD/CAM software to program fixtures and to develop drawings for the construction of tools of varying complexity and type., • Tooling includes holding fixtures and drill jigs., • Suggest changes to process or product design to simplify tooling and reduce cost., • Must work with Production to determine type and sequence of operations related to tooling and production operations., • Creates fixture setup documents and planning outlines for CNC programming., • Ongoing self-training to increase personal effectiveness., • Regularly report status of tasks and projects., • Maintain records to organize and report status of personal backlog, and of tasks/project. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: • BS degree in Mechanical or Manufacturing Engineering or equivalent work experience., • Aerospace experience preferred., • NC programming in CATIA V5 required., • Requires 5+ years CAD/CAM experience and extensive knowledge of Vericut software. Knowledge • Ability to handle diverse assignments from technical analysis, to economic justification, to data entry., • Desire to service internal and external customers.

Job Description SUMMARY: This person is primarily responsible for executing, verifying and implementing contractual, engineering and business planning requirements in accordance with customer requirements and company QMS. They utilize statistical thinking and methodologies to identify opportunities, plan improvements, execute those plans, and then follow up to ensure business results have been statistically improved and sustained, especially with regard to meeting customer expectations. They are in-house consultants to all departments to facilitate and lead improvement activities. They support engineering efforts that relate to quality improvement. ABOUT US: Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBLITIES • Jr. Quality Engineer supporting Aerospace programs ensuring the build, assembly, and test of all hardware meet quality requirements., • Review and approval of Drawing Changes Task, Test Procedure reviews, manufacturing work instructions reviews and PO instructions to External Providers., • Responsible for ensuring all engineering requirements are met prior to performing Product Acceptance., • Responsible for generating and maintaining FAI reports for complete product including fabricating applicable required mechanical and physical test reports., • Collaborate with engineering and manufacturing functions to ensure quality standards are in place., • Support constraint reviews for manufacturing operations and applicable test protocols, assuring all constraints are captured and communicated in a professional timely manner., • May analyze inspection and testing processes, mechanisms and equipment; conducts quality control tests., • Provide Frequent Activity Reports to Management, highlighting critical activities and major occurrences., • Engages in product failure investigations, material review board decisions and corrective/preventive action., • Work may include support of Quality metrics generation KNOWLEDGE AND SKILL REQUIREMENTS: • Bachelor’s degree in engineering or equivalent specialized experience., • 2+ years’ experience with Quality Assurance programs in a corporate environment preferred., • Must be detail orientated, extremely organized; possess excellent communication skills and be able to interact well with all levels of Staff and Management., • Must have working knowledge of ISO9001:2000 and AS9100(Current Revision), • Must have working knowledge of Customer and Supplier audits., • Must be familiar with Customer specifications and processes., • Must have direct communication with internal customers., • Must be able to conduct formal training of changes & customer requirements., • Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: • Four (4) year degree or equivalent in work experience., • Adequate years of experience in Quality Control / Assurance in a manufacturing environment and or training in a related field determined by Karman, • Adequate years of experience implementing and or managing ISO Quality systems determined by Karman. WORK ENVIRONMENT: • This position operates in a professional office environment., • This position routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. TRAVEL REQUIREMENTS: • No travel is required for this position. LICENSING & CERTIFICATION • Quality/statistical related certifications advantageous (ASQ, Six Sigma, Lean)., • Professional auditing experience preferable. Quality certification, or RAB certification, preferred ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. Monday - Friday: 7am to 4pm | Saturdays as needed

Job Description About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We leverage advanced GaN transistors, proprietary power-combining techniques, and innovative full-system designs to deliver the industry’s most efficient, compact, and lightweight high-power SSPAs. With more than 100 years of combined leadership experience supplying high-performance, high-reliability RF solutions to commercial, military, and space customers, Mission Microwave has grown rapidly over the past decade and is backed by a private equity firm committed to long-term innovation and expansion. We are proud to be ranked #23 on Fortune’s Best Workplaces in Manufacturing & Production and to have been recognized as a Great Place to Work® since 2022. Mission Microwave is headquartered at 6060 Phyllis Drive, Cypress, CA 90603. About the Role As an RF Engineer, you will help architect, design, and validate the advanced RF and microwave subsystems that enable mission-critical communications across aerospace, defense, and satellite markets. You’ll own the entire development lifecycle—from concept, simulation, and circuit design to integration, verification, and production support—ensuring that every subsystem meets the rigorous performance, reliability, and environmental standards our customers demand. Working closely with cross-functional engineering, manufacturing, test, and quality teams, you’ll turn innovative concepts into robust, scalable, production-ready hardware. Your work will directly influence the performance, manufacturability, and long-term reliability of high-power, high-frequency systems deployed in some of the world’s most challenging environments. What You’ll Do • Design innovative quasi-optical and spatial power-combining architectures., • Prepare documentation including design reports, test results, root-cause analyses, failure reports, and manufacturing support materials., • Collaborate cross-functionally with mechanical, thermal, manufacturing, and quality engineering teams to ensure designs are robust, manufacturable, and aligned with reliability and production standards., • Support new product introduction (NPI) efforts—design reviews, manufacturability assessments, prototype builds, and issue resolution during production ramp-up., • Troubleshoot and resolve issues related to design, testing, reliability, and manufacturing, providing corrective actions and continuous improvement recommendations., • Hands-on experience designing, simulating, producing, and validating RF/microwave circuits and subsystems., • Proficiency using RF test equipment including network analyzers, spectrum analyzers, oscilloscopes, signal generators, and power meters., • Bachelor’s degree in a relevant engineering field., • Minimum of 3 years of direct experience in RF hardware design and measurement., • Electronic Warfare (EW) or radar experience is a plus. Mission Microwave is proud to be an Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity, and to maintaining a workplace free from unlawful discrimination and harassment. All qualified applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other characteristic protected by federal, state, or local laws. Mission Microwave maintains a drug-free workplace and conducts pre-employment background checks and, where permitted by law, substance-abuse testing. Many of our roles support U.S. Government programs and require the ability to obtain and maintain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who receive a conditional offer may be subject to government security investigations and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that Mission Microwave may share your application materials, including your resume and any related personal information or documentation, with its subsidiaries or affiliated partners strictly for the purpose of evaluating you for current or future employment opportunities.

Job Description Thermal Engineering International (USA) Inc. is excited to announce an opening for a Sr. Design Engineer to join our talented engineering team. In this pivotal role, you will be responsible for reviewing customer specifications, performing mechanical design calculations and associated analysis, preparing manufacturing drawings as well as presenting, documenting and updating of these activities to others as necessary. Your technical expertise and creative problem-solving skills will be key in optimizing designs for performance, manufacturability, and cost-effectiveness. If you are passionate about engineering and thrive in a fast-paced environment, we encourage you to apply and contribute to our mission of delivering exceptional thermal engineering solutions. Key Responsibilities • Review contract requirements, client technical specifications, sales package and all design data., • Conduct mechanical calculations, prepare design details, generate fabrication drawings and bills of materials, analyze foundation loading, execute code calculations, and create instruction manuals., • Develop required general arrangement drawings, fabrication details, assembly drawings, P&ID, and Bill of Material drawings., • Review fabrication drawings to ensure they meet client specifications., • Issue final drawings/document packages to workshops or clients as instructed., • Prepare Installation and Operation Manuals (IOM) and submit to client for review and approval., • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field; Master’s degree is a plus., • 5+ years of experience in the particular product line and industry common to the product., • Expert experience in designing pressure vessels and heat exchangers per ASME Code (Section VIII Divisions 1 and 2) and HEI Standards is required., • Experience in performing finite element analysis (FEA) to the requirements of ASME code is a plus., • Demonstrated proficiency in drafting using AutoCAD, Inventor, or SolidWorks., • Strong knowledge of Microsoft Word, Excel, and Power Point., • Registered as a Professional Engineer is preferred., • Certification in AutoCAD, SolidWorks or inventor design software is a plus. Compensation: $110,000 - $130,000 annually DOE Benefits Click link to view a summary of our benefits.

Job Description Senior Cost Estimator (Aerospace Manufacturing) An Estimator is a professional who helps determine the cost of fabrication projects for a "build to print" job shop. They will work closely with engineering, manufacturing, and purchasing team members to evaluate costs, labor hours, materials and processing relative to the customer drawings and specifications. They discover and report risks or potential delays while determining the cost, lead time and value of each job. ESSENTIAL DUTIES AND RESPONSIBILITIES • Analyze drawings, specifications, and program/project requirements., • Determining key variables for cost and all elements of fabrication, • Gather first-hand information from history, the shop floor, purchasing and prior experience., • Evaluate and investigate re-run jobs for time, material, and processing anomalies., • Coordinate with sales team on quoting strategies and priorities., • Obtain and review quotes from material vendors, subcontractors, and processors., • Perform risk analysis with respect to capabilities and tolerances, and determine any deviations or clarifications needed., • Build relationships with key vendors (subcontractors, suppliers, engineers etc.), • Compile the data into an estimating worksheet and by using comparative analysis determine the sell price for the component or assembly., • Complete the quote sheet and forward the data to sales or management for review., • Mentor junior estimators and support supervisor duties as needed., • Proven experience as an estimator or a similar position, • Familiarity with financial and project management principles, • Computer literate with emphasis on spreadsheets and MRP software, • Knowledge of research and data analysis methods and formulas, • Outstanding communication and negotiation skills, • Thoroughness and reliability, • Excellent organizational skills, • Ability to work with schedules and deadlines., • US citizen or persons required in order to comply with ITAR regulations, EDUCATION and EXPERIENCE • Engineering and/or Estimating experience preferred, • 5-7 years of experience in Estimating and/or Manufacturing Engineering (or equivalent) COMMUNICATION SKILLS • Ability to read, write and speak English is required., • Verbal and written communication skills required. Face to face, phone and digital (e-mail/text) interactions must be clear and concise. WORK SCHEDULE: Monday to Thursday 6am to 4:30, off Fridays. Job Posted by ApplicantPro

Job Description Job Summary: The Airworthiness Engineer (Qualification / Certification) performs formal qualification and regulatory compliance oversight test activities for standard and custom hardware and software systems. This individual will develop procedures needed to demonstrate product compliance and will assist in the evaluation of test equipment required to verify product performance during qualification tests. The Staff Qualification Engineer will assist in the construction or modification of test fixtures. This individual has principal responsibility for ensuring all aspects of product and system-level qualification are compliant with the appropriate airworthiness requirements and regulation including all the substantiation data deliverables for Airbus, Boeing, and STC. This individual is expected to be coaching junior Engineers in the qualification field. Duties and Responsibilities: • Interface with Design and Software groups to identify support equipment needed to successfully execute performance verification during formal qualification testing, • Actively participate and represent the qualification team in all design development meeting such as PDR and CDR, • Revie and approve technical data pertaining to the Qualification Procedures and Qualification Test Repots needed to demonstrate product compliance to established requirements, • Work with, but remain independent of, the design team to ensure adherence to the qualification strategy, • Facilitate contracts execution with third-party laboratories to secure the proper resources, test facilities and regulatory agency coordination, • Monitor, coordinate and manage all activities related to the execution of formal qualification test program including, but not limited to:, • Test schedule (chronological order of test activities), • Set up and integration of test lab and support equipment, • Regulatory authority coordination as it relates to the execution of formal qualification testing, • Regularly scheduled status reports, • As a Subject Matter Expert (SME), performs the necessary research, including root cause analysis to support the development and release of a Failure Reporting and Corrective Action (FRACA) which documents test failure conditions and recovery plan, • Masters all the Electromagnetic Compatibility EMC, Environmental (ENV), and Structural (STR) testing requirements and troubleshooting techniques, • Bachelor’s Degree in Engineering or equivalent experience in a related field, • 9+ years of experience working in a similar role or related field, • Experience working in an AS9100 quality environment, • Experience in a test environment with emphasis on satisfying the authorities & OEM requirements as well as other industry standards, • Strong familiarization with FAA Part 25 and EASA CS Part 25 requirements related to airborne IFE equipment, • In-depth knowledge of industry-standard RTCA and airframe qualification requirements, • In-depth working knowledge of Microsoft Office, • In-depth knowledge of Electrical/EMI test procedures, potential challenges and mitigation techniques, • Hands-on experience with:, • Temperature and pressure chambers, • Vibration and Acceleration test equipment, • EMI test set up and wiring The base salary range for this position is $130,000 – $168,000 per year and reflects multiple levels within the role. Final level and compensation will be determined based on the candidate’s skills, experience, qualifications, and internal equity. In addition to a comprehensive package of health benefits that include company contributions, RAVE Aerospace offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with company match, • Paid time off covering vacations, personal time off and sick days, capped off by an exciting year-end holiday shutdown, • Embraced flexibility with our alternative work schedule (9/80) to navigate your workweeks with every other Friday off

Job Description SUMMARY: The Director of Engineering for Karman Space & Defense’s Orange County Region will lead the strategic development and implementation of advanced manufacturing processes across CNC Programming, Precision Machining, Weld Fabrication + EB Welding and Complex Integrations Assembly operations. This role combines hands-on engineering leadership with forward-thinking program oversight to enhance technical capability, improve execution efficiency, and support business growth. Reporting to the General Manager, the Engineering Director will foster a culture of innovation and collaboration across multi-disciplinary teams, ensuring delivery of high-quality results in line with schedule and financial performance targets. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement ESSENTIAL DUTIES & RESPONSIBILITIES Technical Leadership & Innovation • Lead process advancement in machining, welding, and assembly forming technologies., • Experience with CATIA software for Aerospace design and manufacturing., • Develop and implement robust process controls and new manufacturing methods aligned with customer and business needs., • Oversee tooling design, machine programming, and process optimization efforts., • Advance engineering data business systems to support technical insight, process integration, and productivity improvements. Team & Program Management • Supervise cross-functional engineering teams and program staff, ensuring appropriate skill alignment and workload balance., • Provide leadership in personnel development, mentoring, and performance management., • Coordinate staffing and execution of project plans including cost, schedule, and technical goals., • Own program-level results and execution standards across engineering and manufacturing interface. Strategic Execution & Collaboration • Support business development by aligning engineering capabilities with new customer opportunities., • Develop proposals and strategic plans for technology upgrades and capability expansion., • Drive cross-site collaboration and standardization in tooling, processes, and documentation., • Interface with internal and external stakeholders to ensure alignment on goals, milestones, and deliverables. QUALIFICATIONS & EXPERIENCE Education: • Required: B.S. in Mechanical, Aerospace, or Manufacturing Engineering (or related field), • Preferred: M.S. in Engineering or Management Experience: • 10+ years of experience in aerospace or defense manufacturing, • 5+ years in a leadership or engineering management role, • Demonstrated success managing complex technical programs and cross-functional teams, • Expertise in, • expertise in machining, CNC programming, tool design, and related technologies., • Experience with ERP and advanced business systems ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. • Other Requirements:, • Strong communication and leadership skills

Job Description The Manufacturing Engineer plays a crucial role within the Production team, working closely in a cross-functional environment to oversee planning activities for mixed production processes, including aerospace, defense, exotic metals, process manufacturing, and assembly-based operations. This role requires daily interaction with suppliers to ensure smooth material flow and relies heavily on tools such as Epicor to optimize production scheduling and inventory management without travel requirements. Experience in CNC machining further supports the planner’s ability to coordinate complex manufacturing processes effectively. Req: • Proficiency in work instruction/traveler creation, specifically within the aerospace industry, • Understanding of bills of materials and lead times, • Understanding of blueprints and GD&T (pdf and model based), • Capability to create work instructions from scratch for new parts, • Familiar with Boeing, Lockheed, and Northrop process requirements, • Ability to prioritize multiple projects in a fast-paced environment, • Proficiency with ERP/MRP systems (Epicor) Responsibilities: • The role involves compliance with customer and product procurement specifications, implementing engineering changes, and validating that the manufacturing process meets all customer and internal requirements, • Responsible for creating clear and concise work instructions for detail parts, sub-assemblies, and top assemblies, • Comply with customer and product procurement specifications, • Update work instructions when any rework is necessary, • Implement all engineering changes into work instructions, • Validate that the manufacturing process meets all customer and internal requirements, • Work with purchasing to order materials required for planned parts, • Submit and update traveler/engineering to customers through customer portals/emails, • Develop and improve manufacturing processes for aerospace parts and assemblies (machining, assembly, sheet metal, or similar), • Create and maintain routers/travelers, work instructions, process specs, and standard workCompany DescriptionManufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.Manufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.

Job Description POSITION SUMMARY We pride ourselves on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. AAR has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for an experienced Industrial Manufacturing Engineer to join our ranks and continue our tradition of success. Primary Duties and Responsibilities: include the following and all other duties assigned. · Candidate will support the new product development (NPD) team with a focus on promoting cost effective design for manufacturing and assembly (DFMA). · Candidate will support the transition of new products from NPD into value stream (VS) production. This includes ensuring accurate preparation of process router sheets and standard labor hours, detailed work instructions, and Bill of Materials as well as creating work cells, setting up the line, ensuring adequate line capacity, development of operator training by the NPD team and VS production leads, creating standard work and detailed work instructions, etc. · Provides full line support to assist VS production in resolving assembly, contractual, and/or technical matters. · Collaborate with quality on Rejected Material disposition and resolution to related manufacturing process problems. · Evaluate and process Engineering Change Orders (ECO) through completion. Coordinate implementation of ECOs on affected hardware. · Provide cost estimating support for new RFQ programs. · Generate plant wide cost reduction and VS productivity improvements projects. Manufacturing project management participation in planning, execution and tracking of on-going production, new product release, and rework projects as assigned by the Value Stream Manager. Facilitate and manage multiple projects and initiatives at one time. Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Education and/or Experience (Must be relevant to the job, not the person. Must be the minimum qualifications relevant to the job and all applicants must meet minimum qualifications): Four (4) year degree in Manufacturing/Industrial Engineering or related technical degree from accredited school and 3-5 years of relevant experience in job shop and lower volume production environments. Must have hands on knowledge of methods, processes, tools and equipment in a manufacturing facility. Candidate must be mechanically inclined and hands on. Lean implementation experience desired. · Skills: Competent knowledge of Windows, Excel, Word, Access, PowerPoint, MSN Project, ERP and Outlook. Ability to communicate orally and in writing utilizing basic project management skills is required. Understanding of basic lean manufacturing concepts is strongly desired (value stream mapping, 5-S, Kanban, elimination of waste, standard work, visual management, lean cell design, setup reduction, mistake proofing, etc). · Reasoning Ability: Must be able to work under pressure and deal with multiple priorities and still meet deadlines. Ability to solve practical problems and apply critical thinking to address issues only limited information is available. Ability to interpret a variety of instructions furnished in written, oral or diagram format. Candidate must be mechanically inclined with a true understanding of equipment. Physical Demands: The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Careful not exceed safe lifting limits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individuals should be physically able to carry out job assignments in a production environment. Physical activity will require walking, climbing stairs and lifting 25 pounds without assistance. Should have good overall vision, depth perception and have the ability to differentiate colors. Hazard Analysis/Personal Protective Equipment Required: The hazards described here are representative of those an employee could encounter while performing the essential functions of the job. The personal protective equipment will be provided by the company to alleviate the hazard. Physical Requirements: • Prolonged periods of sitting at a desk and working on a computer., • Must be able to access and navigate each department at the organization’s facilities., • Must be able to lift and carry items weighing up to twenty-five (25) pounds on a repetitive basis., • Must be able to stand, walk, bend, squat, climb, kneel, twist and work at heights on an intermittent basis for up to twelve (12) hours., • Requires hand manipulation including simple grasping, pushing and pulling of materials., • Must be able to reach and work above and below the shoulder level., • Must be able to work with and around forklifts and hazardous machinery., • Must be able to wear all the required Personal Protective Equipment.

Job Description The Production Supervisor will be responsible for overseeing the manufacturing processes of composite materials. This position entails managing a team of technicians ensuring adherence to production schedules, quality standards, and safety regulations. The supervisor is pivotal in coordinating between various departments, optimizing production processes, and implementing continuous improvement strategies. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Supervise the daily activities of the production team, assigning tasks, and setting production targets aligned with lean manufacturing pinciples., • Monitor and evaluate process parameters to ensure quality and consistency in manufacturing processes., • Promote a culture of safety, ensuring all team members are following safety protocols and using personal protective equipment appropriately., • Implement and maintain lean manufacturing principles, including SS, Kaizen, JIT, etc., to maximize productivity and minimize waste., • Develop, implement, and update standard operating procedures (SOPs) for manufacturing processes., • Collaborate with the Quality Assurance team to ensure that products meet all technical specifications and aerospace industry standards., • Coordinate with other departments, such as Design and Engineering, to address any potential production issues., • Conduct staff training to ensure all team members understand and can effectively follow SOPs and lean manufacturing principles., • Regularly review and assess team performance, providing constructive feedback, and implementing improvement measures as needed., • Provide regular progress reports to upper management, including information about production metrics, quality assurance, and process improvement efforts. POSITION QUALIFICATIONS: • Extensive experience in composites manufacturing processes and techniques., • Experience and familiarity with ERP systems. Global Shop Enterprise highly desirable., • Demonstrated success in all functional areas within a fast-paced, technically focused manufacturing growth environment is essential. Must be hands on capable of effective project management and implementing tactics to drive Company initiatives in a time sensitive manner., • Must be results-oriented and demonstrate strategic thinking, innovation, flexibility in dealing with changing and ambiguous situations., • Demonstrate outstanding organizational, communication, and management skills, and a rigorous attention to detail., • Ability to effectively demonstrate business skills and lead multiple projects. Thorough knowledge of industry practices and the marketplace associated with fielded products or service. COMPETENCIES: • Technical Expertise - Must possess a robust understanding of composite material production, specifically in the aerospace and defense sector. This includes staying abreast of the latest technological advancements, industry standards, and manufacturing techniques. The role requires the application of this knowledge to continually enhance production processes, ensuring efficiency, quality, and innovation., • Team Collaboration- Demonstrate excellent team collaboration skills, fostering a cooperative and productive work environment. This involves building strong relationships within the team and across departments, effective communication, and the ability to lead and participate in joint projects. The goal is to align team efforts with organizational objectives, promoting a culture of mutual support and shared success., • Initiative/Problem Solving - Must be willing to identify existing or potential problem areas. Expected to determine, evaluate, and suggest appropriate courses of action and implement effective solutions. Interested in seeking ways to improve processes. Weigh the consequences before making a final decision. Recognize issues and determine actions needed to advance the decision-making processes., • Continuous Improvement-Actively participates in lean manufacturing initiatives such as 55, Kaizen Events, RCCA, and Value Stream Analysis. Demonstrates enthusiasm and positivity for improving processes and their work environment. Initiates improvement without the need for constant supervision. EDUCATION/ EXPERIENCE: Education: High School Diploma or Equivalent Experience: 5+ years in a supervisory role. • Project management experience preferred., • Preferred specific composites and aerospace industry experience. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to sit, stand, walk, stoop, kneel or crouch; use hands to finger, handle, or feel and reach with hands and arms. N (Not Applicable) 0 (Occasionally) F (Frequently) C (Constantly) Activity is not applicable to this position. Position requires activity up to 33% of the time (0 - 2.5+ hrs/day) Position requires activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) Position requires activity more than 66% of the time (5.5+ hrs/day) Physical Demands Lift/Carry 10 lbs or less 0 11-20 lbs 0 21-50 lbs 0 51-100 lbs N Over 100 lbs N Push/Pull 12 lbs or less 0 13-25 lbs 0 26-40 lbs 0 41-100 lbs N Other Physical Requirements " Vision (Near, Distance, Color, Peripheral, Depth) • Sense of Sound - Able to hear average conversations, • Sense of Touch, • Ability to wear Personal Protective Equipment (PPE) - Required Safety Glasses Hazard Analysis/Personal Protective Equipment required: * • The hazards described here are representative of those an employee could encounter while performing the essential functions of the job. Personal protective equipment will be provided by the company to alleviate the hazard. WORK ENVIRONMENT: This position requires an on-site presence. Working conditions are normal for an office environment but may be noisy at times. Work may require occasional weekend and/or evening work. The company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate. Company DescriptionApex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.Apex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.

Job Description Sr Manufacturing/Component Engineer...EMS Provider Golden West Technology, a highly regarded provider of electronic manufacturing services located in Fullerton, CA, has a position open in our engineering dept that requires a very capable, attention-to-detail oriented person. Shall possess a working knowledge of customer product design analysis with production implementation, component engineering, essential electronic assembly processes, automated equipment as well as electronic testing practices. Responsibilities include: Customer product design analysis...a) design for manufacturability recommendations b) PCB panelization design c) BOM analysis, missing parts, duplication, etc. d) labor assembly bid estimates Production implementation...a) assembly instruction generation b) customer testing c) special tooling Component Engineering...a) alternate part recommendations b) support customer in Root Cause Failure analysis c) producibility constraints for assembly processes d) Bill of Materials generation and support Automated assembly equipment...a) automated equipment programming b) maintenance and repair support c) equipment upgrade recommendation/implementation d) SMT process management Assembly processes a) working knowledge of IPC-610 assembly requirements b) electronic test and troubleshooting support c) new process introduction and process improvements d) Customer laison College degree is required. At least 3-5 years general engineering experience is necessary, preferably in the electronic manufacturing industry or related assembly environment with working knowledge of electronic components, drawings and schematics. Required computer skill includes spreadsheets, automated design (like CAD,CircuitCam, Gerber viewers) and automated assembly equipment (wave solder, SMT lines, etc) Professional interaction is essential for customer communications in all aspects of production related information. Working knowledge and familiarity with ROHS compliance, and quality systems like ISO9000 and AS9100... a necessity as well. GWT is an equal opportunity employer offering benefits like 401k and health insurance. Company DescriptionWell established electronic contract manufacturer, Golden West Technology, has been in business for over 48 years. We serve the Medical, Industrial and Aerospace/Defense markets. Office hours are 8am to 5pm, our shop is open 7am to 3:30 pm for main shift but on temp basis one shift is working 6am to 2:30... Our plant is located at 1180 E Valencia Drive, Fullerton CA 92831, interviews by appointment only after pre-screening.Well established electronic contract manufacturer, Golden West Technology, has been in business for over 48 years. We serve the Medical, Industrial and Aerospace/Defense markets. \r\nOffice hours are 8am to 5pm, our shop is open 7am to 3:30 pm for main shift but on temp basis one shift is working 6am to 2:30...\r\nOur plant is located at 1180 E Valencia Drive, Fullerton CA 92831, interviews by appointment only after pre-screening.

Job Description POSITION SUMMARY Performs incoming, in-process and final inspection of machined and injection molded detail parts and composite assemblies. Responsible for completing all In-Process and Final First Article Inspection Reports IAW the latest Revision of AS9102. Inspectors are able to use inspection hand tools and have a strong knowledge of ASME Y14.5M geometric dimensioning and tolerancing (GD&T), and understand the x, y, z coordinate system. Able to use inspection planning tools and perform a product audits; determines sample size for lots; pull random samples. identify and report nonconforming material. They verify and maintain traceability (product, material, and calibration). Inspection has a strong knowledge of basic mathematical operations and perform measurement conversions. POSITION DUTIES/RESPONSIBILITIES • Ensure that all material received is in compliance with all appropriate documents (purchase order) and policies and is delivered to the appropriate locations., • Utilizes written inspection procedures, drawings, specification sheets, and first article samples during inspection. Inspection may require training and use of various inspection equipment, tools, fixtures, and measuring instruments., • Ability to use measurement instruments like micrometer, caliper, thread gauge, and ruler., • Completes, maintains, and distributes appropriate Quality records and documentation. Communicates directly with purchasing, manufacturing, material control and management personnel., • Ensures that all nonconforming material is handled in accordance with appropriate procedures and Documents., • Communicate with purchasing department on any nonconforming material, missing documentation, material certs, and wrong material specification., • Inspects and tests machined metal and plastic parts and composite aircraft and aerospace parts, assemblies, and structures for work quality, dimensional accuracy, and conformance to engineering drawings and specifications, using precision measuring, and testing instruments and equipment., • Inspects laminated and molded structures during all phases of fabrication and assembly to ensure adherence to specifications., • Visually inspect parts and assemblies for fissures, porosity, delamination’s, contour, and other physical characteristics. Alert Production lead and/or supervisor of any quality issues., • Measures parts and assemblies for dimensional accuracy, using precision measuring instruments, templates, jigs, and fixtures., • Perform receiving inspection on all incoming materials and maintain the nonconforming material in quarantine area., • Willconduct an immediate visual examination of the packaging of each receiving item, looking for damaged., • Calculates and records test results. SKILLS & ABILITIES · Excellent verbal and written communication skills. · Excellent interpersonal and customer service skills. · Excellent organizational skills and attention to detail. · Excellent time management skills with a proven ability to meet deadlines. · Ability to function well in a high-paced and at times stressful environment. · Proficient with Microsoft Office Suite (Excel, Word, and PowerPoint). EDUCATION & EXPERIENCE Education: High school diploma or GED equivalent required Field of Study or related field and/or equivalent experience. Experience: Three years assembly and /or QC experience. Previous experience in manufacturing/assembly/packaging operations is desirable. Experience working with metals (aluminum, stainless steel) and composite material is a plus. WORK ENVIRONMENT This position requires an on-site presence. Working conditions are normal for an office environment but may be noisy at times. Work may require occasional weekend and/or evening work. The position must meet Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR) Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen (whether born or naturalized), lawful permanent resident, refugee, or asylee. Employment with the company is contingent on either verifying U.S.-person status or obtaining any necessary license that the applicant will be required to answer certain questions for export control purposes. The information will be reviewed by compliance personnel to ensure compliance with federal law. The employer may choose not to apply for a license for such individuals whose access to export-controlled technology or software source code may require authorization and may decline to proceed with an applicant on that basis alone. Company DescriptionApex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.Apex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.

Job Description POSITION SUMMARY The Quality Engineer is responsible for developing, implementing, and maintaining quality standards, methods, instructions, and quality planning on assigned programs. The role includes performing supplier surveys, internal audits, and process audits. The Quality Engineer will support engineering, manufacturing, program management, and quality groups, and will be actively involved in continuous improvement initiatives and customer/supplier interactions. POSITION DUTIES/RESPONSIBILITIES · Review customer Purchase Order and Contract requirements to communicate quality requirements to responsible departments. · Perform internal and process audits, as assigned. · Provide technical direction and support to inspection. · Review and approve drawings and product build (work orders) documentation. · Review product discrepancies in manufacturing, perform investigations and coordinate with manufacturing and engineering to resolve problems. · Document, track and communicate Quality Plans, test results, analysis & unresolved problems. · Perform AS9102 First Article Inspection Reports · Represent Quality Assurance in day-to-day communication with customers and suppliers, including certifications, data, and corrective actions. · Perform supplier surveys, as assigned. · Review supplier purchase requisitions and apply appropriate quality requirements. · Support assigned Quality Assurance tasks, as required. · Support the company’s training program by creating, reviewing, and updating training materials. · Participate in and lead continuous improvement and Lean Manufacturing initiatives. SKILLS & ABILITIES · Excellent verbal and written communication skills. · Excellent interpersonal and customer service skills. · Excellent organizational skills and attention to detail. · micrometers, height gauges, etc. · Working knowledge of Mil-Spec and government contract requirements. · Working knowledge of ISO 9001 and AS9100 Quality Management Systems requirements. · Analytical and problem-solving ability · Excellent time management skills with a proven ability to meet deadlines. · Ability to function well in a high-paced and at times stressful environment. · Proficient with Microsoft Office Suite or related software. Education and Experience Education: Bachelor's Degree (four-year college or technical school) Preferred. Or equivalent experience. Field of Study: or related field and/or equivalent experience. Experience: Minimum of 3 years of experience as a Quality Engineer, in a manufacturing environment. PHYSICAL DEMANDS N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Position requires activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Position requires activity more than 66% of the time (5.5+ hrs/day) Physical Demands Lift/Carry • 10 lbs or less O, • 11-20 lbs O, • 21-50 lbs N, • 51-100 lbs N, • Over 100 lbs N Push/Pull • 12 lbs or less O, • 13-25 lbs O, • 26-40 lbs N, • 41-100 lbs N Other Physical Requirements · Must be able to remain in a stationary position such as working at a desk on a computer for prolonged periods of time. · This position requires you to occasionally move about the office to access filing cabinets, office machinery, etc. · Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. · The ability to communicate information and ideas so others will understand. Must be able to exchange accurate information in these situations. · The ability to observe details at close range (within a few feet of the observer). · This position requires the ability to navigate and access all areas of our campus. · Ability to wear Personal Protective Equipment (PPE) - Required Safety Glasses WORK ENVIRONMENT This position requires an on-site presence. Working conditions are 50% a normal office/lab environment and 50% a manufacturing environment and may be noisy at times. Work may require occasional weekend and/or evening work. The company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate. Company DescriptionApex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.Apex Space and Defense prides itself on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. APEX, Santa Ana, has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for a Service Technician to join our ranks and continue our tradition of success.

Job Description Embark on a transformative career with Safran Passenger Innovations, where we are forging an unparalleled in-flight entertainment ecosystem. As an innovative company we design and engineer world-class In-Flight Entertainment and Connectivity (IFEC) solutions. Our products are constantly evolving, solving complex media distribution, playback, and networking problems in a secure, demanding on-wing environment. Safran IFEC products are utilized by many of the world’s premier air carriers. Step aboard and help us by creating the best in-flight experiences for today and beyond! Job Summary: The Staff Integration and Test Engineer, Connectivity is accountable and responsible for the Integration and Testing of the AeroConnect and legacy Honeywell Jetwave Products. In this role, the individual will be supported by a team of engineers who contribute to the execution of development and testing activities. The Staff Integration and Test Engineer, Connectivity will collaborate closely with team members in the Gilching, Germany office, the Engineering team in Brea, and Product Management to ensure alignment with company priorities, strategic vision, business objectives, ROI and product deployment plans. Duties and Responsibilities: • Lead the Integration and Testing of the Connectivity products for deployment into the field, • Lead the Document Delivery creation of the Testing documents, • Lead the Testing of the product, properly planning and coordinating the activities based on delivery needs, • Assist with onboarding personnel to create the Connectivity Technical Team in the SPI Brea Office, • Support the key relationships within the organization for execution – Gilching office, Engineering Leadership and Customer Management personnel, • Monitor issues, deviations or departures from commitments and solve or notify the appropriate stakeholders, • Identify and suggest resolutions for process problems, • Support customer visits, sales, and the program office as required Core Qualifications: • Bachelor’s Degree in Engineering or equivalent experience in a related technical field, • 10+ years of experience in product development, integration, and field deployment, with a strong focus on system-level integration and testing, • 7+ years in integration and test lead roles, • Expertise in system integration practices, verification & validation methods, and structured testing processes for complex hardware/software products, • Hands-on experience planning, executing, and reporting on integration and test activities in alignment with program schedules, • Proficiency in preparing and reviewing technical test documentation to meet engineering, program, and customer requirements, • Strong analytical and problem-solving skills with the ability to troubleshoot issues, evaluate root causes, and implement effective solutions, • Proven ability to collaborate across cross-functional and global teams, including engineering, product management, and customer-facing groups, • Strong communication skills to clearly present test results, participate in customer discussions, and support program reviews The starting pay range for this position is $120,000 to $135,000 per year however, base pay offered may vary depending on the level, skills, experience, job-related knowledge and location. In addition to a comprehensive package of health benefits that include company contributions, Safran Passenger Innovations offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with company match, • Paid time off covering vacations, personal time off and sick days, capped off by an exciting year-end holiday shutdown, • Embraced flexibility with our alternative work schedule (9/80) to navigate your workweeks with every other Friday off

Job Description About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We leverage advanced GaN transistors, proprietary power-combining techniques, and innovative full-system designs to deliver the industry’s most efficient, compact, and lightweight high-power SSPAs. With more than 100 years of combined leadership experience supplying high-performance, high-reliability RF solutions to commercial, military, and space customers, Mission Microwave has grown rapidly over the past decade and is backed by a private equity firm committed to long-term innovation and expansion. We are proud to be ranked #23 on Fortune’s Best Workplaces in Manufacturing & Production and to have been recognized as a Great Place to Work® since 2022. Mission Microwave is headquartered at 6060 Phyllis Drive, Cypress, CA 90603. About the Role Mission-critical hardware starts with world-class layout, and that’s where you come in. As a Layout Engineer I, you will help transform high-frequency circuit designs into reliable, production-ready hardware that supports advanced RF and microwave systems used in aerospace, defense, and satellite communications. Your work will directly influence the performance, reliability, and manufacturability of products deployed in some of the most demanding environments on the planet. In partnership with electrical, mechanical, and manufacturing engineers, you will create precision PCB layouts, apply RF design best practices, and ensure compliance with rigorous industry and military standards. From concept through qualification and high-rate production, you’ll be a key contributor to the entire product lifecycle. What You’ll Do • Create detailed schematics and PCB layouts in Altium (or equivalent)., • Build and maintain library entries for schematic symbols and component footprints., • Review and interpret datasheets, technical documentation, and manufacturer guidelines., • Generate accurate Bills of Materials (BOMs)., • Complete design checklists and produce clear, compliant technical documentation., • Troubleshoot and resolve layout-related issues, ensuring optimized signal integrity and RF performance., • Develop reliable technical solutions and approaches for complex layout and assembly challenges., • Support quality, repeatability, and manufacturability for products moving into and through production., • Collaborate with cross-functional teams including mechanical, electrical, and software engineering., • Communicate directly with PCB/PCBA/CCA manufacturers and review externally produced work., • Perform peer reviews and validate the work of internal or outsourced layout resources., • 3+ years of direct experience in RF electronic hardware layout and design., • Hands-on knowledge of RF layout best practices, manufacturing methods, and test principles., • Proficiency with Altium Designer or an equivalent CAD tool., • Working knowledge of IPC-610, MIL-STD-883, MIL-STD-750, MIL-STD-1580, and relevant ISO/AS requirements., • Strong Windows and Microsoft Office proficiency., • Excellent communication skills—verbal, written, and cross-functional., • Self-motivated, detail-oriented, and comfortable in a fast-paced environment., • Bachelor’s degree in Engineering, Computer Science, or a related technical field., • 3+ years of relevant industry experience., • CID, CIS, or CSE certification(s) preferred. Mission Microwave is proud to be an Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity, and to maintaining a workplace free from unlawful discrimination and harassment. All qualified applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other characteristic protected by federal, state, or local laws. Mission Microwave maintains a drug-free workplace and conducts pre-employment background checks and, where permitted by law, substance-abuse testing. Many of our roles support U.S. Government programs and require the ability to obtain and maintain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who receive a conditional offer may be subject to government security investigations and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that Mission Microwave may share your application materials, including your resume and any related personal information or documentation, with its subsidiaries or affiliated partners strictly for the purpose of evaluating you for current or future employment opportunities.

Job Description The Senior Product Manager for Content Management Tools & Web Platform is responsible for web-based interface & tools that enable airlines and media operations to manage, configure, and deliver inflight entertainment (IFE) content and associated. The Senior Product Manager will act as a conduit between internal teams, airline/partner stakeholders, and other Product Managers to define and prioritize features across the product backlog. They are an outcome-focused individual with a passion for improving inflight experiences through efficient content operations, scalable tooling, and intuitive web experiences for airline media operations users. Core Responsibilities • Lead ideation, technical development, and launch of content management tools and web-based platforms supporting IFEC systems, • Own and manage platforms that enable content ingestion, media catalog management, configuration, scheduling, and distribution to aircraft, • Collaborate with UI/UX, backend, and API teams to ensure seamless workflows across content operations, web interfaces, and onboard systems, • Drive development of web portals that provide airline users with control, visibility, and configuration capabilities for IFE content and services, • Assist in establishing a shared vision across the organization by building alignment on priorities and execution plans, • Gather and translate airline and internal operational needs into scalable product requirements, • Drive platform development with engineering, product design, and cross-functional teams across content operations, distribution, and onboard integration, • Contribute to short-term and long-term product roadmaps for content management and associated web platforms, • Ensure products are designed with clear operational workflows, including content update cycles, validation, and deployment processes, • Define and analyze metrics related to content operations, platform usage, and system reliability, • Understand the IFEC, Consumer Technology, and Entertainment Technology landscape as it relates to content delivery and management platforms, • Evaluate competitive offerings and deliver best-in-class tools that reflect the voice of the airline customer Requirements Qualifications • Bachelor’s Degree in Computer Science, Engineering, Media Technology, Information Systems, or equivalent practical experience, • 3–7 years of experience in Product Management or Product Development in multimedia platforms, digital media, streaming, broadcasting, or content operations environments, • Strong understanding of end-to-end multimedia workflows, including ingestion, transcoding, metadata management, packaging, scheduling, and distribution, • Experience working with media asset management (MAM) or content management systems (CMS), • Familiarity with web-based platforms used for content configuration, publishing, and system integrations, • Understanding of content operations workflows, including content updates, validation, QA, and deployment cycles, • Familiarity with media formats and standards (e.g., MP4, MP3, MPEG-DASH, codecs such as H.264/H.265, DRM systems), • Experience collaborating with cross-functional teams including engineering, content operations, UX/UI, and external partners, • Ability to influence without authority and manage competing priorities in complex, multi-stakeholder environments, • Knowledge of Product Management tools such as Jira, Confluence, and prototyping/wireframing tools Soft Skills • Communicates effectively with cross-functional stakeholders and adapts messaging to audience, • Builds productive working relationships and influences collaboration across teams, • Exercises sound judgment when navigating ambiguity or incomplete information, • Solves complex or non-routine problems by analyzing risks, impacts, and constraints, • Demonstrates ownership of outcomes and proactively identifies improvements, • Adapts quickly in dynamic environments and guides others through transition, • Maintains resilience in challenging situations and helps stabilize team momentum The starting pay range for this position is $110,000 - $125,000 per year however, the base pay offered may vary depending on the level of the position, skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, RAVE Aerospace offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with a company match, • Paid time off covering vacations, personal time off, and sick days, capped off by an exciting year-end holiday shutdown, • Embraced flexibility with our alternative work schedule (9/80) to navigate your workweeks with every other Friday off

Job DescriptionAbout Us: Adams Rite Aerospace, based in Fullerton, CA, is a leading aerospace component manufacturer providing innovative and high-quality solutions to the aerospace industry. We partner with major OEMs such as Boeing, Airbus, and Embraer, as well as their sub tier suppliers, Airlines, and MROs worldwide. Position Summary: We are seeking a Sales Engineer to lead sales efforts in the Americas region. This individual will be responsible for managing and growing key OEM accounts, expanding our presence with Airlines and MROs, and driving new business growth. This role requires a unique blend of sales expertise and technical acumen. The ideal candidate will not only build strong customer relationships but also work closely with both the customer and our own engineering team to identify and solve customer challenges. The Sales Engineer will serve as a bridge between customers and internal technical teams, ensuring that Adams Rite Aerospace delivers tailored, high-value solutions. This is a road warrior role with 60% or more travel. Key Responsibilities: • Develop and execute a regional sales strategy to achieve bookings and revenue targets with a focus on new business., • Engage with Airlines, MROs, OEMs, and key sub-tier suppliers to identify and address technical challenges., • Work closely with customers to understand their needs and collaborate with internal engineering teams to develop innovative solutions., • Provide technical guidance on product capabilities, applications, and integration., • Manage and expand relationships with key industry players in the assigned region., • Analyze market trends, competitor offerings, and customer requirements to drive strategic sales initiatives., • Represent Adams Rite Aerospace at industry events, trade shows, and customer meetings., • Travel and/or meet with customers within the assigned region (60% or more).Qualifications:, • Bachelor’s degree in Engineering, Business or related field (MBA is a plus)., • 3-5 years of experience in aerospace, with a preference for candidates with technical experience., • Strong technical understanding of aerospace components and systems., • Proven ability to identify customer challenges and collaborate with engineering teams to develop solutions., • Strong network within the aerospace sector, particularly with Airlines, MROs and OEMs., • Excellent communication, presentation, and negotiation skills., • Ability to travel and/or meet frequently with customers in the assigned region., • Must be authorized to work in the US., • To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government.Why Join Adams Rite Aerospace?, • Work with a globally recognized aerospace manufacturer., • Significant growth opportunity within the organization., • Competitive compensation package with performance-based incentives and full benefits., • Opportunity to drive meaningful growth and have a direct impact on company success. JUG4B0UrSR

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The CAM Engineer utilizes computer-aided manufacturing software to optimize supply data for the manufacturing of printed circuit boards. The CAM Tech Engineer can undertake complex jobs or jobs that involves sequential lamination, book binders and high layer counts. What You'll Do: • Use CAM software to perform design rule analysis of printed circuit boards, • Upon receipt of traveler from planning, verify customer requirements with CAM documents package to detect discrepancies; verify manufacturability, • Report discrepancies to planning for deviations, • Modify various aspects of PCB image such as line widths, pad sizes, etch comp and annular ring to ensure compliance with engineering standards, • Create computer files to panelize data and output drill, AOI and test data, • High school diploma or GED, • 5 years or more of experience in PCB industry or manufacturing, • Working knowledge of the PCB industry and processes, • 3 years or more of CAM experience in the PCB manufacturing sector, • Attention to detail, • Excellent verbal and written communication, problem-solving and decision-making skills, • Ability to quickly adapt in a fast-paced and changing environment, • Ability to read mechanical and electrical blueprints, • Proficient in Microsoft Office, • Technical certificate or Associate's degree in Manufacturing, Engineering, or related field, • 1st Shift (7:30am to 4:00pm), • Full-Time / Permanent Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.