Trabajos aerotek en Richmond, VirginiaCrear alertas

Job DescriptionJob Title: Construction Laborer Job Description This role involves supporting a variety of construction projects in the Richmond area, with a strong focus on window-related work, concrete repair, and general construction tasks. You will perform hands-on duties such as caulking, cutting and installing windows, and completing concrete repairs, often working at heights and in outdoor conditions. Responsibilities • Perform window caulking to ensure proper sealing, weatherproofing, and durability., • Cut, fit, and install windows according to project specifications and safety standards., • Carry out concrete repair tasks, including preparation, patching, and finishing., • Work at heights and in the air as required for window installation and repair work., • Use hand tools and power tools safely and effectively for construction and repair activities., • Assist with general construction labor, including site preparation, cleanup, and material handling., • Support glazing work on windows, ensuring proper installation and finishing., • Follow safety procedures and guidelines while working outdoors in varying weather conditions., • Collaborate with team members to complete projects efficiently and on schedule., • Maintain tools, equipment, and work areas in clean, safe, and functional condition.Essential Skills, • Proven construction labor experience with hands-on work on active job sites., • Concrete repair experience, including preparation, patching, and finishing., • Glazing and window-related experience, including installing and sealing windows., • Strong caulking skills, particularly for windows and exterior applications., • Carpentry experience, required for cutting, fitting, and installing windows and related components., • Ability to work safely at heights and in the air as part of daily duties., • Proficiency with hand tools and power tools commonly used in construction., • Capability to perform physically demanding tasks in outdoor environments., • Reliability and punctuality to meet a consistent weekly schedule.Additional Skills & Qualifications, • Experience working on a variety of construction projects and adapting to different tasks., • Familiarity with general labor duties such as site cleanup and material movement., • Strong attention to detail to ensure high-quality window installation and concrete repair., • Ability to follow instructions and work effectively as part of a construction team., • Commitment to safe work practices in all weather conditions.Why Work Here? You will join a growing local team that offers steady, full-time work and the opportunity to build your skills across a range of construction tasks. The schedule provides a minimum of 40 hours per week, with a consistent Monday through Friday workday from early morning to late afternoon, plus occasional Saturdays, supporting predictable income and routine. You will work with a team that values reliability, craftsmanship, and long-term growth within the organization. Work Environment This is an outdoor, field-based role where you work on active construction sites in the Richmond area. You will work outdoors in all weather conditions, including rain or shine, and frequently perform tasks at heights or in elevated positions. The schedule is generally Monday through Friday from 6:45 a.m. to 4:00 p.m., with some Saturdays as needed, and a minimum of 40 hours per week. The work involves regular use of hand tools and power tools, handling construction materials, and performing physically demanding tasks throughout the day. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $18.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 17, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionAssemblerBuild Something Great Every Day Are you someone who enjoys working with your hands, solving mechanical challenges, and seeing the results of your hard work come to life? We're looking for motivated Assemblers to join our growing team and help build high-quality coil assemblies in a clean, modern manufacturing environment. This isn't just another production job—it's an opportunity to develop valuable skills, work with advanced equipment, and be part of a company that invests in your success. What You'll Do As an Assembler, you'll play a critical role in creating precision-built products that make a difference for our customers. Every day brings a new challenge as you: ✅ Operate certified overhead cranes to safely move materials and components ✅ Gather and prepare parts including fins, casings, hairpins, tubes, and other assembly materials ✅ Set up assembly tables using fixtures, clamps, braces, and endplates to ensure precise builds ✅ Use a variety of electric, pneumatic, floor, and hand tools to complete assemblies ✅ Align fins and lace hairpins or tubes according to detailed specifications and drawings ✅ Safely handle and move oversized fin bundles, pallets, carts, and large coil assemblies ✅ Read blueprints, schematics, and production drawings to build products accurately ✅ Perform quality-focused tasks such as reaming coils and inspecting finished assemblies ✅ Prepare packaging and support materials to protect completed products ✅ Maintain a safe, clean, and organized work area ✅ Collaborate with teammates and contribute to a positive, high-performing culture What Makes You a Great Fit We're looking for dependable team players who enjoy hands-on work and take pride in quality craftsmanship. Preferred Qualifications ✔ Manufacturing, production, or mechanical assembly experience ✔ Strong mechanical aptitude and problem-solving abilities ✔ Experience operating overhead cranes, hoists, or material-handling equipment ✔ Comfortable using power tools, pneumatic tools, and hand tools ✔ Ability to read blueprints, drawings, and schematics ✔ Strong attention to detail and commitment to quality ✔ Basic math skills for measurements and assembly tasks ✔ Ability to lift up to 50 pounds unassisted ✔ Ability to stand, bend, and move throughout the shift ✔ Positive attitude, strong work ethic, and willingness to learn ✔ Team-first mindset with great communication skills Why You'll Love Working HereGrow Your Career We're committed to helping our employees succeed. With ongoing expansion, internal promotion opportunities, and personalized development plans, you'll have the chance to build a long-term career—not just hold a job. Be Recognized Your contributions matter. We believe in coaching, mentoring, and recognizing great work as it happens. Work in a Supportive Culture Join a team that values respect, accountability, teamwork, and continuous improvement. You'll work alongside people who genuinely care about each other's success. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 27, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Warehouse Worker Job Description This role focuses on receiving, storing, and issuing materials, equipment, and other items within a stockroom, warehouse, or storage yard. You will help maintain accurate inventory records, ensure materials are stored safely and efficiently, and support daily operations in a climate-controlled, high-volume distribution environment that ships critical prescriptions nationwide. Responsibilities • Receive incoming stock items, verify quantities, and accurately record data manually or using a computer system., • Count and reconcile stock items, comparing physical counts to inventory records and investigating or correcting any discrepancies., • Pack and unpack items to be stocked on shelves in stockrooms, warehouses, or storage yards., • Store items in an orderly, clearly labeled, and accessible manner in warehouses, tool rooms, supply rooms, or other storage areas., • Mark stock items using identification tags, stamps, electric marking tools, or other labeling equipment to ensure proper tracking., • Clean and maintain supplies, tools, equipment, and storage areas to ensure compliance with safety and housekeeping standards., • Keep accurate records of stock usage, damage, and stock handling equipment to support inventory control and reporting., • Examine and inspect stock items for wear, damage, or defects, and promptly report any issues to supervisors., • Provide assistance and direction to other stockroom, warehouse, or storage yard workers to support team productivity and workflow., • Determine appropriate storage methods, identification, and stock locations based on turnover, environmental conditions, and facility capabilities., • Perform order picking and material handling tasks using RF scanners and related equipment as needed., • Pick, pack, and prepare orders for shipment with a strong focus on accuracy and timeliness., • Handle inventory using RF scanners to track stock movement and maintain real-time inventory accuracy., • Work with a strong sense of urgency and purpose to ensure prescription orders are processed and shipped on time., • Rotate through multiple departments as needed, including manual opening of items, filling containers, checking orders, and placing orders., • Stand for extended periods and perform physical tasks such as pushing, pulling, grasping, lifting, and carrying items up to 50 pounds with or without reasonable accommodation.Essential Skills, • Strong verbal and written communication skills to follow instructions, document work, and coordinate with team members., • Analytical and problem-solving ability to investigate inventory discrepancies and resolve issues efficiently., • Proven ability to work effectively as a team player while maintaining a high level of attention to detail., • Knowledge of relevant equipment, policies, procedures, and strategies that support secure and compliant operations for the protection of people, data, property, and institutions., • Experience with picking, packing, and material handling in a warehouse or stockroom environment., • Ability to use RF scanners or similar devices for inventory management and order processing., • High school diploma or GED required., • 5–7 years of related warehouse, stockroom, or inventory experience required., • Willingness to work a flexible shift schedule, including early mornings, evenings, and weekends as assigned., • Ability and willingness to stand for at least 8 hours with or without reasonable accommodation., • Ability and willingness to perform tasks that include pushing, pulling, grasping, and lifting with or without reasonable accommodation., • Ability and willingness to carry up to 50 pounds with or without reasonable accommodation.Additional Skills & Qualifications, • Previous experience in a high-volume distribution or fulfillment environment., • Familiarity with order picking, packing, and inventory workflows in a climate-controlled warehouse., • Comfort working with technology such as RF scanners and basic computer systems for data entry and inventory tracking., • Ability to adapt to different departments and tasks, including manual opening of items, filling containers, checking orders, and placing orders., • Demonstrated ability to maintain composure and accuracy while working with time-sensitive orders., • Commitment to following safety procedures and maintaining a clean, organized work area.Why Work Here? You will contribute directly to a mission-driven operation that ships millions of life-saving prescriptions across the United States every day. The organization emphasizes the real impact of your work, fostering a culture of urgency, responsibility, and purpose. You will work in a laid-back, casual environment where you can listen to music while you work, enjoy a comfortable dress code, and operate in a clean, climate-controlled facility. This is an opportunity to combine stable, hands-on work with the satisfaction of knowing your efforts help people receive critical medications on time. Work Environment The facility is a clean, climate-controlled warehouse environment designed for high-volume prescription fulfillment. Work involves standing for long periods and performing physical tasks such as pushing, pulling, grasping, lifting, and carrying items up to 50 pounds with or without reasonable accommodation. Shifts include a flexible schedule with backfill opportunities, such as a Sunday, Monday, Tuesday, Thursday 5:00 a.m. to 3:00 p.m. shift and a Sunday, Wednesday, Thursday, Friday 3:30 p.m. to 1:30 a.m. shift, supporting continuous operations. The environment is generally laid back and casual; employees may wear jeans, khakis, dress pants, capri pants (no shorter than mid-calf), scrubs, T-shirts, polo shirts, leggings, sweatpants, spandex pants, and jackets, hoodies, or sweaters without pockets. Sneakers and closed-toe shoes are required. Sleeveless shirts, shorts, scarves, dangling jewelry, hats, head coverings, ripped clothing, exposed midriffs, pajama pants, clothing with inappropriate words or graphics, and jackets or hoodies with pockets are not permitted. Employees may keep their phone in their pocket and use one earbud to listen to music while working, but phones may not be used on the floor; repeated violations can result in termination. The work is organized into several departments where specialists perform tasks such as manual opening of items, filling containers, checking orders, and placing orders. Candidates are encouraged to review the provided video overview of the work environment for additional context. Job Type & Location This is a Contract position based out of Mechanicsville, VA. Pay and Benefits The pay range for this position is $15.00 - $15.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mechanicsville,VA. Application Deadline This position is anticipated to close on Jul 23, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Forklift Operator and Material Handler Job Description This role focuses on operating forklifts and machinery in a plumbing supply warehouse to safely move, cut, and prepare pipe and related materials for customer orders. You handle both indoor and outdoor material movement, operate cutting and threading equipment, and support general labor tasks to keep the warehouse and stock yard running smoothly. Responsibilities • Operate sit-down forklifts and Combi lift equipment to move pipe and materials between the stock yard and warehouse or shop areas., • Handle material movement for lighter pipe, fittings, valves, and miscellaneous items stored on shelves inside the warehouse, as well as heavier pipe stored outside in the yard., • Operate a CNC plasma cutter to cut pipe to specified measurements, following work orders and customer requirements., • Thread pipes using designated machinery in the pipe cutting and threading area to prepare orders accurately and efficiently., • Use measurement tools to verify pipe lengths and dimensions before and after cutting to ensure precision and quality., • Perform general labor duties such as organizing materials, staging orders, and maintaining a clean and orderly work area., • Follow established safety procedures when operating forklifts, cutting equipment, and threading machines in both indoor and outdoor areas., • Support the small pipe cutting and threading area in the back corner of the warehouse by preparing materials, loading and unloading pipe, and assisting with workflow as needed., • Collaborate with warehouse team members to ensure timely movement of materials and completion of customer orders., • Inspect equipment and report any issues or maintenance needs to help maintain safe and reliable operations.Essential Skills, • Proven ability to operate forklifts, including sit-down forklifts and Combi lift equipment, in a warehouse or yard environment., • Experience with machine operation, specifically cutting and threading equipment used for pipe processing., • Competence in using measurement tools to accurately measure pipe and materials., • Background in general labor and material handling in an industrial or warehouse setting., • Ability to work safely in non-climate controlled environments, including outdoor stock yards., • Strong attention to detail when cutting, threading, and handling pipe to meet customer specifications., • Capability to perform physical tasks such as lifting, moving, and organizing materials throughout the shift.Additional Skills & Qualifications, • Experience working in a plumbing supply or similar industrial warehouse environment., • Familiarity with handling both lighter pipe, fittings, valves, and miscellaneous items on shelves and heavier pipe stored outside., • Comfort operating CNC plasma cutting equipment or similar automated cutting machinery., • Ability to adapt to varied tasks, including forklift operation, machine operation, and general labor responsibilities., • Willingness to work in a small, specialized area dedicated to pipe cutting and threading within the warehouse., • Basic understanding of safety practices related to material handling, forklift use, and machine operation.Why Work Here? You join a hands-on, operations-focused environment where your skills with forklifts and machinery directly support customers and day-to-day warehouse success. The role offers consistent, practical work with clear responsibilities and the opportunity to develop and refine material handling and machine operation skills. You work as part of a small, collaborative team that values reliability, safety, and efficient workflows. Work Environment The position is based in a plumbing supply warehouse and adjoining stock yard that is non-climate controlled and open air, which can be very hot during the summer. Inside the warehouse, you work among shelves stocked with lighter pipe, fittings, valves, and various materials, while outside you handle heavier pipe stored in the yard. A small area in the back corner of the warehouse is dedicated to pipe cutting and threading for customer orders, where you operate equipment such as a CNC plasma cutter and threading machines. The environment is industrial and physically demanding, with regular movement between indoor and outdoor areas and a practical, work-focused atmosphere. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $20.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: 2nd Shift Assembler / Production Operator Job Description The 2nd Shift Assembler / Production Operator plays a key role in the manufacturing mechanical untis by safely operating hand and power tools, overhead cranes, and semi-automated equipment. This position is responsible for loading and unloading metal plates and products throughout the production process, following standardized procedures, and using touchscreen computer systems to access work orders and operate machinery. The role requires strong mechanical aptitude, attention to detail, and a commitment to safety, quality, and continuous improvement within a modern, climate-controlled manufacturing environment. Responsibilities • Safely operate hand and power tools, overhead cranes, and production equipment, • Load and unload metal plates on and off machines and ovens throughout the manufacturing process., • Use touchscreen computer systems to access work orders and operate overhead cranes and production equipment correctly., • Set up and run machines according to work orders, ensuring proper operation and product quality., • Follow all Standard Operating Procedures (SOPs) and comply with safety requirements at all times., • Wear required personal protective equipment (PPE), including safety glasses, steel-toe shoes, and gloves., • Report safety, quality, equipment, or material issues promptly to leadership., • Participate in daily production meetings and continuous improvement activities., • Support 5S initiatives by maintaining a clean, organized, and efficient work area., • Cross-train in multiple manufacturing processes and assist with process improvements as needed., • Assemble heat exchangers using hand and power tools and support the transition to a semi-automated assembly line., • Stop the production process when safety, quality, or environmental deviations are identified., • Highlight problems and deviations and take initiative to drive problem resolution and improvement activities., • Communicate effectively with support functions such as Quality, Maintenance, Order Planning, and Warehouse., • Perform assembly, production support, and shipping/warehouse functions as operations expand and responsibilities vary., • Handle materials, stocking, and picking tasks to support production and outbound shipments. Essential Skills • 2–3 years of experience in a manufacturing environment working with machines, equipment, and jigs., • Ability to safely use hand and power tools in an assembly and production setting., • Strong mechanical aptitude and comfort working with mechanically inclined tasks., • Ability to read and interpret drawings, blueprints, manufacturing orders, and related documentation., • Intermediate computer skills, including use of touchscreen systems to access and follow work orders., • Experience with assembly operations, including metal and copper assembly, piping, and brazing., • Ability to lift up to 50 lbs on a regular basis., • Willingness and ability to work 2nd shift (Sunday–Thursday, 2:00 PM – 10:30 PM)., • Attention to safety and quality, with the confidence to stop production in case of deviations., • Effective communication skills to collaborate with production leadership and support functions. Additional Skills & Qualifications • Experience in higher-level assemblies, particularly with electrical-mechanical components., • Experience in quality assurance, maintenance, or similar technical roles is welcome., • Familiarity with troubleshooting production equipment and processes., • Experience with outbound shipments and warehouse or shipping functions., • Comfort working with copper, piping, and brazing in a manufacturing environment., • Ability to support 5S and continuous improvement initiatives., • Willingness to cross-train and learn multiple manufacturing processes. Why Work Here? Employees join a stable, growth-focused organization that invests in modern equipment, new production units, and expanded shift schedules to support long-term global growth. The facility offers a climate-controlled environment and an onsite cafeteria with made-to-order breakfast and lunch, promoting comfort and convenience during the workday. Advancement opportunities are significant, with many supervisors and leads having started in production and numerous employees building long tenures of over 15 years. The company fosters a strong team-oriented culture, encourages continuous improvement, and operates at record-high production capacity, providing both job security and opportunities to develop new skills in a cutting-edge manufacturing setting. Work Environment This role is based in a clean, climate-controlled manufacturing facility on 2nd shift, working Sunday through Thursday from 2:00 PM to 10:30 PM. The department is expanding with new equipment and an additional shift schedule, and responsibilities may span assembly, production support, and shipping/warehouse functions. The warehouse is located adjacent to the production area, enabling close collaboration between teams. Employees are required to wear steel-toe shoes, long pants, and a plain T-shirt; safety glasses are provided, and gloves are part of the required PPE. The facility features an onsite restaurant offering made-to-order breakfast and lunch daily, and the overall environment emphasizes safety, organization, and a strong team-oriented culture. Job Type & Location This is a Contract to Hire position based out of RICHMOND, VA. Pay and Benefits The pay range for this position is $20.75 - $20.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in RICHMOND,VA. Application Deadline This position is anticipated to close on Jul 20, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Tube Mill Operations Job Description The New Hire Utility role supports tube mill operations by learning to operate and assist with equipment used in extrusion and tube mill production, while handling aluminum products safely and efficiently. You start as a utility employee, rotating through multiple departments to learn machine operation, quality, packing, inspection, and material handling, before moving into a permanent department based on internal bidding processes. This position is hands-on, highly team-oriented, and requires strong mechanical aptitude, attention to quality, and readiness to work in a unionized manufacturing environment. Responsibilities • Learn to operate equipment associated with the extrusion and tube mill processes, including casting and production machinery used for aluminum products., • Support tube mill operations by moving materials on and off machines using proper lifting techniques and hoists, ensuring safe and efficient material flow., • Perform general labor and production support tasks such as packing, assembly line work, loading, and basic machine operation as assigned., • Assist machine operators with extrusion or casting equipment and participate in machine set-up, operation, and shutdown activities as needed., • Conduct visual inspections and quality checks on products to ensure all quality objectives and standards are met, following established SOPs and quality control procedures., • Report and review any unusual conditions, equipment issues, or safety concerns with lead operators or supervisors promptly., • Work collaboratively on a production team, communicating frequently with team members and management to meet daily production and output goals., • Follow safe job practices at all times, including proper use of PPE, adherence to safety protocols, and maintaining a clean and organized work area, including cleanup of grease, oil, and hydraulic fluids., • Handle materials and inventory in a manufacturing environment, including loading, unloading, staging, and moving product using appropriate tools and equipment., • Perform inspection, quality assurance, and quality control tasks, documenting results accurately and completing all required production and quality paperwork., • Use hand tools, tape measures, and other basic tools to support production, assembly, and machine operation tasks., • Participate actively in best-in-class new hire orientation and ongoing training programs to develop skills, increase competency, and qualify for higher-level roles and pay rates., • Adapt to working in a union environment and follow union guidelines related to shift movement, job bidding, and flexibility, whether or not you are a union member., • Rotate through various departments as a utility worker to learn processes, equipment, and procedures, then transition into a specific department upon becoming a permanent employee., • Be willing and able to work all three tube mill shifts (7–3, 3–11, 11–7) and extended hours as needed, including 10–12 hour days and up to 6 days per week when required., • Perform physically demanding tasks including frequent lifting of 15–50 lbs and occasional lifting up to 100 lbs with assistance, stepping on and off machinery, bending, pushing, and pulling heavy objects., • Learn to operate a forklift if you do not already have that experience, and support cross-training needs across different areas of the production process., • Maintain a positive, “can-do” attitude toward cross-training, new responsibilities, and continuous improvement in a complex manufacturing environment with both modern robotic equipment and older machinery. Essential Skills • 1–2 years of experience in a manufacturing, production, or material handling environment., • Experience in general labor and production support within a manufacturing or assembly line setting., • Mechanical aptitude with the ability to learn machine operation, process flow, and basic troubleshooting., • Background in machine operation or assembly that supports understanding of raw material flow through the production process., • Experience with production, assembly, packaging, and general production tasks., • Ability to perform material handling duties, including loading, unloading, and moving product safely., • Basic proficiency using hand tools and measuring tools such as tape measures., • Experience with inspection, quality control, quality assurance, and quality checks in a manufacturing environment., • Ability and willingness to learn machine operating and machine operation tasks, including press machine operation., • Strong verbal and written communication skills for documenting production, quality, and safety information accurately., • Willingness and ability to learn forklift operation if not already experienced., • Capability to work in a union environment and adhere to union-related guidelines on shifts and job bidding., • Ability to work all three shifts (7–3, 3–11, 11–7) and to handle long workdays and overtime as needed., • Physical ability to frequently lift 15–50 lbs and occasionally up to 100 lbs with assistance, step over obstacles, work on and around machinery, and bend, push, and pull objects in excess of 15 lbs., • Comfort working around grease, oil, and hydraulic fluids, and participating in cleanup activities related to metal manufacturing processes. Additional Skills & Qualifications • Prior machine operating experience in a manufacturing or heavy industrial environment is encouraged., • Experience in production, assembly, and material handling roles such as forklift operation, packaging, and general production work., • Familiarity with manufacturing processes, extrusion, tube mill operations, or metals manufacturing is beneficial., • Experience performing visual inspection and quality checks on manufactured products., • Ability to understand and follow standard operating procedures (SOPs) and quality requirements., • Demonstrated integrity, strong work ethic, and reliability in previous roles., • Comfort working with both modern robotic equipment and older, large-scale industrial machinery., • Willingness to participate fully in orientation, training, and onboarding processes, including all required screenings., • Interest in long-term career progression within a manufacturing environment, including bidding into different departments over time. Why Work Here? You will join a values-driven manufacturing organization that emphasizes integrity, strong work ethic, and teamwork, and is committed to helping every new hire grow personally and professionally. The culture focuses on attracting great people, providing best-in-class orientation and training, and offering ongoing development opportunities so you can build your skills and advance into higher-level roles. You benefit from structured career paths within the extrusion department, annual pay increases, performance-based incentive bonuses, a company-matched 401(k), and comprehensive, low-cost medical coverage with company-paid dental and vision benefits. The environment supports long-term stability, meaningful work solving complex problems for customers, and the chance to work alongside colleagues who share a common vision of producing high-quality products. Job Type & Location This is a Contract to Hire position based out of North Chesterfield, VA. Pay and Benefits The pay range for this position is $20.81 - $20.81/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in North Chesterfield,VA. Application Deadline This position is anticipated to close on Jul 27, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Chemical Process Operator Job Description The Chemical Process Operator will be responsible for tending equipment and managing semiautomatic processes for the formulation of chemical substances used in industrial and consumer products. Working at a small chemical packaging site, the operator will follow batch sheets and recipes, ensuring accurate chemical formulations. Responsibilities • Tend to equipment and semiautomatic processes for chemical substances., • Work as an operator and material handler in a small chemical packaging site., • Follow batch sheets/recipes for chemical formulations and lift up to 50 lbs repetitively., • Inspect work areas and equipment for leaks or malfunctions, shutting equipment down when necessary and notifying maintenance or engineering., • Operate sit-down forklifts to move materials or bring barrels, drums, vials, or totes to equipment for processing., • Learn product labeling and use computer software to enter and verify product content, volume, and usage., • Weigh and measure quantities of solids, powders, and liquids into heating vessels or blending tanks., • Monitor and document gauges, signals, and recorders, receiving notifications from the lab supervisor on process changes. Additional Skills & Qualifications • Ability to operate a forklift in small spaces with substantial accuracy., • Excellent depth perception to reach totes on high racks without causing damage., • Experience working in a hot and inherently dirty environment. Why Work Here? This role offers the opportunity to work in a low-stress environment that emphasizes accuracy. The company is well-known in its field and provides uniforms to ensure comfort in the workplace. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: CNC Press Operator Job Description The Press Mechanic sets up and operates metalworking presses to consistently and efficiently produce high-quality parts. This role focuses on performing die changeovers, maintaining precise tolerances, and ensuring equipment runs safely and reliably through effective troubleshooting and preventive maintenance. Responsibilities • Set up metalworking presses to produce quality parts consistently and efficiently, following documented procedures and standards., • Change over dies and operate press equipment, including disassembling and reassembling dies and internal mechanisms as required., • Use blueprints, manuals, router information, and multiple procedure books to correctly set up tooling and machines for each job., • Perform complete die tear-downs and changeovers that may take 2–4 hours, ensuring all internal mechanisms are properly adjusted and secured., • Execute advanced die changes that may require 4–8 hours, then run production for several days to a week while monitoring performance and quality., • Carry out normal plate changes, typically taking about one hour before production run time, ensuring accurate alignment and setup., • Hold tight tolerances during operation and continuously observe machinery to verify that presses are running correctly and safely., • Perform daily preventive maintenance tasks on presses and related equipment to minimize downtime and extend equipment life., • Use hand and measuring tools such as calipers, wrenches, and drills to perform adjustments, alignments, and maintenance activities., • Operate an overhead crane or hoist to safely load and unload material, including flipping bundles weighing approximately 200 pounds., • Troubleshoot mechanical issues with presses and associated tooling, identifying root causes and implementing effective corrective actions., • Collaborate with team members and follow established procedures to ensure efficient changeovers and smooth production transitions., • Maintain a clean and organized work area and comply with all safety policies and procedures while operating machinery and handling materials. Essential Skills • Experience setting up and operating metalworking presses in a production environment., • Proficiency performing die changeovers, including complete and advanced die changes and plate changes., • Ability to read and interpret blueprints, manuals, router information, and procedure books to set up tooling and machines accurately., • Strong troubleshooting skills for mechanical issues related to presses and tooling., • Demonstrated preventive maintenance experience on production machinery., • Mechanical aptitude with hands-on experience using calipers, wrenches, drills, and related tools., • Ability to operate an overhead crane or hoist to load and unload heavy material bundles safely., • Experienced in mechanics, maintenance, or press operation., • Capability to hold and monitor tight tolerances and ensure consistent product quality., • Comfort working with multiple procedures and documentation to ensure correct setup and operation. Additional Skills & Qualifications • Previous experience in a metal fabrication, stamping, or press shop environment., • Familiarity with climate-controlled manufacturing facilities and modern production practices., • Ability to follow structured training and development plans and participate in individual development planning., • Willingness to work across different shifts as needed, in coordination with a multi-shift press team., • Strong attention to detail and commitment to safety and quality., • Effective communication skills to coordinate with team members and supervisors during changeovers and production runs. Why Work Here? Join a growing organization that invests in its people and facilities, offering a modern, employee-focused environment and clear pathways for development and advancement. You will benefit from strong employee retention, a supportive and tenured team, and robust benefits for you and your family. The company is expanding, adding new facilities and equipment, and provides structured training and development plans to support your short- and long-term career goals. Regular step-based pay progression and a focus on succession planning create a transparent and motivating environment where your contributions are recognized and rewarded. Work Environment Work in a clean, climate-controlled manufacturing facility equipped with modern presses and expanding capacity. The shop currently employs hundreds of team members and is growing significantly, including the addition of a new facility and an additional press. The environment includes multiple shifts with established press headcounts on first, second, and third shift, providing opportunities to work within a structured, multi-shift operation. Employees have access to contemporary amenities such as an onsite gym and a modern breakroom with recreational options like a ping pong table. The facility emphasizes safety, organization, and consistent processes, with overhead cranes and hoists used to move and flip heavy material bundles. Dress and personal protective equipment align with a professional manufacturing setting, supporting safe and efficient operation of machinery. Job Type & Location This is a Contract to Hire position based out of North Chesterfield, VA. Pay and Benefits The pay range for this position is $24.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in North Chesterfield,VA. Application Deadline This position is anticipated to close on Jul 27, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Quality Control Technician Job Description The Quality Control Technician is responsible for ensuring that products and materials meet both internal and external quality requirements. This role involves measuring objects or parts against specifications and drawings, reporting findings, and providing problem-solving resources as needed. You will support various departments, including Operators, brazing, testing, and assembly areas, to ensure specifications are met. Responsibilities • Establish quality standards for the products produced by the company., • Read drawings and specifications to ensure operations meet production standards., • Recommend necessary adjustments and changes to production processes., • Inspect and test materials as required., • Use gadgets such as micrometer screw gauges to measure products., • Remove products that don’t meet production standards and recommend strategies to improve product quality., • Accept or reject finished products and discuss inspection results with the production team., • Perform random inspections to assess product quality., • Take on other duties or assist in other departments as needs change., • Clean work area to meet 5S standards. Essential Skills • Mechanical aptitude., • Experience in inspection, production, and quality control., • Familiarity with manufacturing processes., • Ability to perform quality assurance and visual inspection., • Experience with mechanical tools such as calipers and micrometers., • Strong analytical and problem-solving skills., • Attention to detail. Additional Skills & Qualifications • Technical skills and ability to understand blueprints, documents, and manuals., • Basic math and computer skills., • Ability to influence others to follow rules and regulations., • Strong leadership skills and a teamwork mentality., • Effective verbal and written communication skills., • Dexterity, physical strength, and stamina. Why Work Here? This employer is celebrated for having won one of the top Manufacturers in Richmond. The facility is brand new and is projected to grow significantly. Employees enjoy a stable work environment where they tend to stay long-term. Work Environment This position is for the second shift, running from approximately 3:00 PM to 11:30 PM, Monday through Friday. Employees must attend a daily meeting at 2:30 PM. The building is equipped with new air conditioning and is kept very clean. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $22.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: CNC Press Operator Job Description The Press Mechanic sets up and operates metalworking presses to consistently and efficiently produce high-quality parts. This role focuses on performing die changeovers, maintaining precise tolerances, and ensuring equipment runs safely and reliably through effective troubleshooting and preventive maintenance. Responsibilities • Set up metalworking presses to produce quality parts consistently and efficiently, following documented procedures and standards., • Change over dies and operate press equipment, including disassembling and reassembling dies and internal mechanisms as required., • Use blueprints, manuals, router information, and multiple procedure books to correctly set up tooling and machines for each job., • Perform complete die tear-downs and changeovers that may take 2–4 hours, ensuring all internal mechanisms are properly adjusted and secured., • Execute advanced die changes that may require 4–8 hours, then run production for several days to a week while monitoring performance and quality., • Carry out normal plate changes, typically taking about one hour before production run time, ensuring accurate alignment and setup., • Hold tight tolerances during operation and continuously observe machinery to verify that presses are running correctly and safely., • Perform daily preventive maintenance tasks on presses and related equipment to minimize downtime and extend equipment life., • Use hand and measuring tools such as calipers, wrenches, and drills to perform adjustments, alignments, and maintenance activities., • Operate an overhead crane or hoist to safely load and unload material, including flipping bundles weighing approximately 200 pounds., • Troubleshoot mechanical issues with presses and associated tooling, identifying root causes and implementing effective corrective actions., • Collaborate with team members and follow established procedures to ensure efficient changeovers and smooth production transitions., • Maintain a clean and organized work area and comply with all safety policies and procedures while operating machinery and handling materials. Essential Skills • Experience setting up and operating metalworking presses in a production environment., • Proficiency performing die changeovers, including complete and advanced die changes and plate changes., • Ability to read and interpret blueprints, manuals, router information, and procedure books to set up tooling and machines accurately., • Strong troubleshooting skills for mechanical issues related to presses and tooling., • Demonstrated preventive maintenance experience on production machinery., • Mechanical aptitude with hands-on experience using calipers, wrenches, drills, and related tools., • Ability to operate an overhead crane or hoist to load and unload heavy material bundles safely., • Experienced in mechanics, maintenance, or press operation., • Capability to hold and monitor tight tolerances and ensure consistent product quality., • Comfort working with multiple procedures and documentation to ensure correct setup and operation. Additional Skills & Qualifications • Previous experience in a metal fabrication, stamping, or press shop environment., • Familiarity with climate-controlled manufacturing facilities and modern production practices., • Ability to follow structured training and development plans and participate in individual development planning., • Willingness to work across different shifts as needed, in coordination with a multi-shift press team., • Strong attention to detail and commitment to safety and quality., • Effective communication skills to coordinate with team members and supervisors during changeovers and production runs. Why Work Here? Join a growing organization that invests in its people and facilities, offering a modern, employee-focused environment and clear pathways for development and advancement. You will benefit from strong employee retention, a supportive and tenured team, and robust benefits for you and your family. The company is expanding, adding new facilities and equipment, and provides structured training and development plans to support your short- and long-term career goals. Regular step-based pay progression and a focus on succession planning create a transparent and motivating environment where your contributions are recognized and rewarded. Work Environment Work in a clean, climate-controlled manufacturing facility equipped with modern presses and expanding capacity. The shop currently employs hundreds of team members and is growing significantly, including the addition of a new facility and an additional press. The environment includes multiple shifts with established press headcounts on first, second, and third shift, providing opportunities to work within a structured, multi-shift operation. Employees have access to contemporary amenities such as an onsite gym and a modern breakroom with recreational options like a ping pong table. The facility emphasizes safety, organization, and consistent processes, with overhead cranes and hoists used to move and flip heavy material bundles. Dress and personal protective equipment align with a professional manufacturing setting, supporting safe and efficient operation of machinery. Job Type & Location This is a Contract to Hire position based out of North Chesterfield, VA. Pay and Benefits The pay range for this position is $24.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in North Chesterfield,VA. Application Deadline This position is anticipated to close on Jul 20, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Assembly Mechanic Job Description The Assembly Mechanic assembles and tests industrial piping systems and skid packages by following engineering drawings and technical specifications. This role uses hand and power tools, performs pneumatic and hydrostatic testing, and maintains accurate documentation while working safely in a structured shop environment. Responsibilities • Assemble and align piping systems, supports, valves, and control components according to engineering specifications and detailed drawings., • Lay out and assemble mechanical systems by interpreting technical drawings, schematics, and blueprints with a high degree of precision., • Use hand tools, power tools, and specialized equipment safely and effectively during all assembly and installation activities., • Assemble industrial skids, including 12-foot industrial skid packages, ensuring correct placement, fit, and function of all components., • Install and test piping systems, including pipe and plumbing installations, to ensure proper flow, pressure, and function., • Perform pneumatic and hydrostatic pressure tests on assembled systems and inspect for leaks, defects, or nonconformances., • Document test results, material usage, and quality checks accurately using QA/QC checklists and other required forms., • Follow all safety procedures, including proper use of personal protective equipment (PPE), adherence to standard operating procedures (SOPs), and compliance with lockout/tagout protocols., • Maintain a clean, organized, and hazard-free work area to support safe and efficient operations., • Collaborate with team members and supervisors to resolve assembly or testing issues and ensure systems meet required specifications., • Apply problem-solving skills to identify root causes of issues and implement effective corrective actions during assembly and testing., • Handle basic mechanical tasks related to diesel, automotive, or construction-style mechanical systems as needed to support assembly work. Essential Skills • Ability to read and interpret blueprints, technical drawings, and schematics for mechanical and piping systems., • Proficiency in mechanical assembly, including piping, supports, valves, and control components., • Experience using hand tools and power tools safely and effectively in a mechanical or construction environment., • General knowledge of piping materials, mechanical components, and basic hand/power tools., • Mechanical assembly experience in areas such as industrial assembly, automotive technology, diesel mechanics, or construction-related mechanics., • Strong verbal and written communication skills to follow instructions, document work, and coordinate with team members., • Physical stamina, including the ability to stand for long periods, bend, stretch, and lift up to 50 pounds., • Strong problem-solving skills and the ability to make sound, data-based decisions during assembly and testing., • High attention to detail and the ability to assemble systems to precise measurements and tolerances., • Ability to maintain accurate documentation, including QA/QC checklists, material usage records, and test results., • Commitment to following safety procedures, including PPE requirements, SOPs, and lockout/tagout protocols. Additional Skills & Qualifications • Experience reading technical drawings and assembling piping systems (preferred)., • Plumbing or pipefitting experience in an industrial or construction environment (preferred)., • Experience performing pneumatic or hydrostatic testing on piping or mechanical systems (preferred)., • Familiarity with flow shop procedures and standard operating procedures (SOPs) (preferred)., • Experience in mechanical fields such as diesel mechanics, automotive technology, or construction trades., • Ability to work effectively in a team-oriented shop environment and support continuous improvement efforts. Why Work Here? You will join a team that supports long-term career development and progression in a stable industrial environment. The organization offers competitive wages, a 401(k) plan with company match, and comprehensive medical, dental, vision, life, and disability benefits. You will have access to paid time off, paid holidays, and an Employee Assistance Program that supports your well-being. The company also rewards referrals through employee referral incentives, reflecting a culture that values its workforce and encourages growth from within. Work Environment This role is based in a flow shop environment focused on assembling industrial skids and piping systems using hand tools, power tools, and specialized testing equipment. Standard hours are Monday through Friday from 6:00 a.m. to 2:30 p.m., with the potential to work later, up to approximately 4:15 p.m., as workload requires. The work involves standing for extended periods, bending, stretching, and lifting up to 50 pounds in a shop setting. You will follow established SOPs, safety procedures, and lockout/tagout protocols while working with mechanical and piping components. The environment emphasizes cleanliness and organization, with an expectation that work areas remain clean, orderly, and free of hazards. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $18.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Mechatronic & Robotic Technician Location: Richmond, Virginia Job Description The Industrial Maintenance Technician installs, maintains, and repairs complex material handling and automated conveyor systems in a large, highly automated distribution environment. This role focuses on predictive and preventative maintenance, troubleshooting electrical, mechanical, and pneumatic systems, and ensuring equipment operates safely and reliably to support high-speed, robotics-driven operations. Responsibilities • Install, inspect, repair, and maintain material handling equipment, including automated conveyor systems and related controls., • Perform quality predictive and preventative maintenance routines on material handling equipment, robotics, and associated systems, following established documentation and procedures., • Conduct battery changes and perform preventative maintenance on industrial batteries to ensure safe and reliable operation., • Troubleshoot and repair electrical, mechanical, hydraulic, and pneumatic systems, identifying root causes and implementing effective solutions., • Use blueprints, electrical schematics, and technical documentation to diagnose equipment issues and guide repairs., • Enter equipment downtime data into daily logs and accurately complete preventative maintenance (PM) sheets and work orders., • Track, organize, and store departmental inventory, including spare parts and maintenance supplies, to support timely repairs., • Apply knowledge of basic electrical components and electronic principles when servicing equipment and controls., • Troubleshoot and diagnose material handling equipment systems, including automated conveyor systems and PLC-based controls, to minimize downtime., • Follow and demonstrate safety standards at all times, including adherence to equipment-specific and OEM safety guidelines., • Utilize Microsoft Office applications to document maintenance activities, track performance metrics, and communicate with team members., • Support continuous improvement initiatives by identifying opportunities to enhance equipment reliability, maintenance procedures, and system performance., • Collaborate with operations and maintenance teams to ensure equipment performance meets established expectations and performance metrics. Essential Skills • At least 2+ years of experience conducting quality predictive and preventative maintenance procedures on industrial or complex systems., • 2+ years of experience in the repair of material handling equipment (MHE) or automated conveyor systems and controls., • 2+ years of experience reading and interpreting blueprints and electrical schematics., • 2+ years of knowledge and hands-on experience with electrical and electronic principles., • 2+ years of experience following and demonstrating safety standards in an industrial or maintenance environment., • 1+ year of experience troubleshooting and diagnosing material handling equipment systems., • 1+ year of experience using Microsoft Office products and applications., • Ability to troubleshoot and repair electrical, mechanical, and pneumatic systems., • Experience performing preventative maintenance on conveyors, hydraulics, pneumatics, and motors., • High school diploma or equivalent. Additional Skills & Qualifications • Experience in distribution, logistics, manufacturing, or industrial environments performing diagnostics, inspections, troubleshooting, repairs, and creating work orders, especially on conveyor systems., • Ability to troubleshoot basic input and output functions of building operations., • Experience using a Computerized Maintenance Management System (CMMS)., • Continuous improvement mindset with a focus on reliability and efficiency., • Willingness to learn and grow within a rapidly evolving, robotics and automation-focused maintenance environment., • Experience with material handling equipment safety standards in accordance with Original Equipment Manufacturer (OEM) and general safety standards., • Associate degree or higher from a vocational school or college with a focus in Mechanical or Electrical fields., • 2+ years of apprenticeship or equivalent experience in the Mechanical or Electrical field., • 2+ years of experience working with PLC-based control systems., • Experience with robotic operation and maintenance. Why Work Here? You join a globally recognized organization consistently ranked among the top employers, offering structured training on high-speed automation and robotic equipment to accelerate your technical growth. The company provides strong upward mobility, with a high percentage of technicians converting to direct employment and many earning promotions within their first year. Work Environment You work in a large, modern distribution facility equipped with high-speed automation and extensive robotic components, including advanced material handling and conveyor systems. The environment is data-driven, with performance tracked through metrics and system reporting to ensure expectations are clear, without day-to-day micromanagement. Job Type & Location This is a Permanent position based out of Richmond, VA. Pay and Benefits The pay range for this position is $32.50 - $42.60/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 23, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Maintenance Technician Job Description The Maintenance Technician installs, adjusts, and repairs production equipment, heavy trucks, and special purpose machinery to keep operations running safely and efficiently. This role performs mechanical, electrical, and hydraulic maintenance, conducts troubleshooting and preventive repairs, and supports the overall reliability of plant equipment and structures in a busy industrial environment. Responsibilities • Install, adjust, and repair production equipment, heavy trucks, and special purpose machines as assigned., • Operate a variety of hand and power tools to repair, grease, weld, cut, change parts, and complete maintenance tasks., • Use cutting torches, welding equipment, and fabrication tools as required to repair and modify equipment., • Perform general repairs to plant structures to maintain a safe and functional facility., • Keep the work area clean, organized, and free of hazards to support safe operations., • Test and troubleshoot malfunctioning machinery, determine required repairs, and coordinate repair plans with the Head Mechanic or Maintenance Supervisor., • Replace faulty parts, electrical wires, motors, controls, and circuit boards to restore proper equipment function., • Install equipment and electrical components and test systems to ensure proper operation and performance., • Dismantle equipment using hoists, cranes, hand tools, and power tools to access and remove defective parts., • Replace and install mechanical, electrical, and hydraulic parts as needed to maintain equipment reliability., • Lubricate, clean, and service parts and equipment on a regular basis to support preventive maintenance and minimize downtime., • Perform troubleshooting and repair on PLC-controlled systems and industrial automation equipment as needed., • Support industrial maintenance activities across the plant, including maintenance and repair of tools, machinery, and related equipment as assigned by the Maintenance Supervisor or Head Mechanic., • Carry out welding and fabrication tasks to repair or modify equipment and plant structures., • Complete preventive maintenance tasks on production equipment and related systems to reduce breakdowns., • Follow all safety procedures when working around dangerous equipment, loud noise, and variable lighting conditions., • Perform other duties and responsibilities related to the nature of the job as assigned on a temporary or permanent basis.Essential Skills, • Demonstrated experience in mechanical maintenance and repair of industrial equipment, tools, and machinery., • Strong troubleshooting skills for mechanical, electrical, hydraulic, and industrial systems., • Ability to perform preventive maintenance on production equipment and related systems., • Hands-on experience with industrial maintenance in a manufacturing or plant environment., • Proficiency in welding, cutting, and fabrication to repair and modify equipment and structures., • Ability to operate a wide range of hand and power tools, including cutting torches, hoists, cranes, and related equipment., • Experience with PLC troubleshooting in an industrial setting., • Knowledge of electrical systems, including motors, controls, circuit boards, and wiring replacement., • Ability to read, understand, and follow repair instructions and maintenance procedures., • Capability to work safely around loud noise, dangerous equipment, and variable lighting conditions., • Physical ability to dismantle, move, and install equipment and parts using appropriate tools and lifting devices., • Strong attention to detail and commitment to maintaining a clean and orderly work area.Additional Skills & Qualifications, • Ability to perform general repairs to plant structures in a heavy industrial environment., • Comfort working in dirty, dusty, hot, and cold conditions typical of a concrete plant., • Ability to collaborate effectively with a small team of technicians across different shifts., • Willingness to work extended hours, rotating Saturdays, and 12-hour shifts as required by production and maintenance schedules., • Commitment to following safety policies and procedures and using appropriate personal protective equipment., • Adaptability to handle a variety of maintenance tasks and priorities as assigned., • Strong problem-solving skills and ability to communicate repair needs and solutions clearly.Why Work Here? You join a leading manufacturer in the building products and outdoor living space, known for an award-winning portfolio that helps customers create inviting outdoor environments. The organization offers highly competitive base pay, comprehensive medical, dental, and disability benefits programs, and a group retirement savings plan to support your long-term financial security. Health and wellness programs are available to help you stay well on and off the job. You become part of a diverse and inclusive culture that values growth, development, and internal promotion, providing opportunities to advance your skills and career over time. Work Environment This role is based in a concrete manufacturing plant with a dirty, indoor/outdoor environment that can be loud, dusty, hot, and cold. You work in a maintenance and production setting with ambient air conditions, loud noise, dangerous equipment, and variable lighting, following strict safety procedures and lockout practices. The maintenance team consists of approximately 5–7 technicians across shifts, fostering a close-knit, collaborative environment. The dress code is practical and safety-focused, typically a T-shirt, jeans, and steel-toe footwear. Shifts are 12 hours, running 7:00 a.m.–7:00 p.m. and 7:00 p.m.–7:00 a.m., with maintenance coverage Monday through Saturday, including rotating Saturdays, and an average of about 60 hours per week. Monday is typically a non-production preventive maintenance day, while production runs Tuesday through Saturday, with night shifts being especially critical to operations. Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Jul 20, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Aerotek - - Responsibilities: Move and stage inventory using a hand jack; Prepare materials for installers; Conduct inventory counts and manage documentation; Operate pallet jacks and perform construction-related tasks.

Aerotek - - Responsibilities: Operating production equipment, machines, and overhead cranes safely; Loading and unloading metal plates, components, and finished products; Assembling heat exchangers using hand and power tools; Reading blueprints, work orders, and manufacturing instructions; Inspecti

This entry-level sales role is designed for individuals eager to learn the full sales cycle, with a clear path toward becoming an Account Manager. We work with 95% of Fortune 500 companies and specialize in staffing and services solutions in manufacturing, logistics, construction, aviation, faciliti

Identify qualified candidates through various recruiting and sourcing tools. Give back to your community by volunteering and partnering with various philanthropic organizations. Aerotek offers a base salary of $45,000 plus unlimited earning potential through commissions after your hourly training pe

Aerotek is an operating company within Allegis Group, a global leader in talent solutions.We are a privately held organization with over 200+ offices nationwide.We work with 95% of Fortune 500 companies and specialize in staffing and services solutions in manufacturing, logistics, construction, avia

Aerotek - North Chesterfield Court - Responsibilities: Operate a sit-down forklift safely and efficiently to move, load, and unload materials; Pull and prepare customer orders accurately and in a timely manner; Load and unload trucks, ensuring products are handled carefully and placed in the correct

Industrial Maintenance Technician.Full-Time 1st or 2nd Shift Available.Our team is partnering again with a well-established manufacturing organization known for its consistent operations strong leadership and long-tenured workforce.This facility operates at a high level of output and relies heavily

Who we are and why we are successful:.The Electrical Equipment Company (EECO) is not your average industrial full-line electrical distributor.We are a passionate customer-centered service organization crazy about building a better tomorrow by serving the manufacturing plants machine builders and con

From commercial office space and manufacturing to multi-site retail portfolios we manage and support over 1 billion square feet of facilities space for the nations leading organizations.We provide comprehensive facility services ranging from mechanical maintenance and self-performed site-based opera

E Parham Rd Henrico Virginia 23228 United States of America.If you are highly motivated and enjoy collaborating with others consider joining U-Haul as a Facility Maintenance this role you will use your technical skills in concert with other technicians to accomplish complex projects sharing and lea

Aerotek - JobID: JP-005852322 [Material Handler / Freight Handler] As a Fulfillment Associate at Aerotek, you'll: Receive products using frequency scanners and unload shipments from trucks; Handle packages ranging from small envelopes to boxes weighing up to 49 pounds; Operate carts, dollies, hand t

Under general supervision performs precision tune-ups and maintenance on HVAC equipment and accessories.Communicates with customers to answer questions resolves problems and ensures complete customer satisfaction.Promotes products and services to customers.Works under the direction of the Field Supe

We know you have a choice about where you work, and we’re excited that you are considering a career with Levco Management.Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part

Aerotek - - Responsibilities: Assemble, dismantle, inspect, and test electrical and electronic components in accordance with engineering prints, schematics, wiring diagrams, work instructions, and quality requirements.

About Us We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management.Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A hu

Aerotek - - Responsibilities: Operate food processing and packaging equipment safely and efficiently; Monitor product quality throughout the production process; Package, label, and prepare finished products for shipment; Complete production and quality documentation accurately; Identify and report

RXO - - Responsibilities: Coordinate and assign work to warehouse associates to maximize productivity; Oversee inventory control and merchandise reconciliation; Instruct associates on equipment operation and safety procedures; Monitor tool, material, and supply availability; ensure housekeeping sta

CJ Logistics - 1750 S Wolf Road - Responsibilities: Provide excellent customer service by issuing parts accurately based on work orders and cost center orders at the counter; Document movement of items in the warehouse management system; Perform daily inventory cycle counts and bin balance checks; P

FedEx - - Responsibilities: Operate equipment safely for movement of packages and heavy freight; Assist in buildup/breakdown of pallets containing heavyweight freight; Serve as liaison between company and ULD repair vendor as required; Lift up to fifty pounds without assistance; Able to walk and s

We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management.Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part o

Breakthru Beverage Group - - Responsibilities: Order Fulfillment and Loading; Load route trucks with product per the invoice; Equipment operation and maintenance; Safety and compliance for beverage handling; Other duties as assigned by supervisor.

Niagara Bottling Inc - - Responsibilities: Operate forklift and LGV to load/unload trailers; Receive inbound orders into WMS and ensure inventory accuracy; Prepare loads for cross country shipments; Coordinate with transportation and production/scheduling to ensure timely shipments; Maintain a clea

We are seeking a dependable and safety-focused Shipping & Receiving Associate to support daily warehouse operations.This role is responsible for loading and unloading materials, preparing shipments, receiving incoming inventory, and ensuring accurate documentation of all products moving in and out o

CJ Logistics - - Responsibilities: Provide excellent customer service by issuing parts accurately based on work orders and cost center orders; Document movement of all items within the warehouse management system; Perform daily Inventory Cycle Counts and reconcile discrepancies; Pick orders and tra