Trabajos business analyst en Lancaster, CaliforniaCrear alertas

Job Description Liberty Behavioral & Community Services, Inc. is currently seeking a Registered Behavior Technician to join our team. The RBT Conduct Specialist utilizes principles of behavior as aligned to RBT training and credentialing. Reporting to the Program Manager, the RBT Conduct Specialist will be expected to perform client training while implementing individualized programs for adults based on ABA principles that increase communication, self- help, social skills, and employment skills. The RBT Conduct Specialist will present skills across domains that include measurement, assessment, skills acquisition, documentation and reporting, and professional conduct. When implementing the Behavior Intervention Plan for the participant they are working with during their session or shift, the RBT Conduct Specialist is flexible and responsive to feedback when reporting the assigned Case Manager and/or other supervisor(s) when working to improve the participant and quality of services delivered at any job assignments at Liberty Behavioral & Community Services, Inc. Work Locations: Downtown Los Angeles, Pasadena, Burbank, Glendale, Palmdale, Lancaster; Semi Valley and San Fernando Valley areas Essential Duties and Responsibilities • Acquire & demonstrate competency when implementing ABA skills aligned to the principles of behavior analysis., • Demonstrate flexibility with performance feedback across work experiences when working with participants, case manager(s), and/or other supervisor(s)., • Demonstrate competency when implementing continuous measurement, procedures (i.e., frequency, duration, etc..) and discontinuous data measurement procedures (i.e., partial-interval recording)., • Collect and enter data (i.e., interfering behaviors and skill acquisition program goal information) and/or update graph(s) for the assigned participant each day., • Demonstrate competency with preference assessments & assist with functional assessment procedures., • Apply contingencies of reinforcement, discrete trials, incidental teaching, task analyses, chaining, discrimination training, stimulus control transfer procedures, stimulus fading procedures, prompting and prompt fading antecedent-based procedures, consequence-based procedures, implement differential reinforcement and extinction procedures, and impalement crisis/emergency procedures., • Complete objective session notes or daily notes each day that are aligned to the participant(s) programming goals and/or Behavior Intervention Plan (BIP), • Demonstrate flexibility with job assignments, working with others, and new working situations while collaborating with clinical team., • Demonstrate being responsive to supervisor(s) feedback (i.e., Case Manager(s), Program Director, etc..) while improving performance., • Utilize positive reinforcement & antecedent modification to increase appropriate behaviors over time., • Manage undesired interfering behaviors with the participant as these occur while following & implementing the (BIP) while being flexible & positive when working with the Board-Certified Behavior Analyst (BCBA)., • Facilitate positive interactions with peers, coworkers, supervisors, and families., • Facilitate participant motivation when teaching & learning about the participant(s) through preference assessments., • Adhere to all local, state, and federal laws when working with participants across the course of each day., • Maintain HIPPA compliance across communication with others., • Demonstrate creativity with participants across daily activities toward developing useful, job-related skills & social skills., • Present effective and confidential communication that is professional and respectful when working with peers, participants, case manager(s), and leadership team (i.e., Program Director, Executive Director, etc.), • Demonstrate courteous and professional behavior with participants, families, service coordinators, other staff members, supervisors, and members of organization linked to Liberty Behavioral & Community Services, Inc., • Check and respond to email within 24 hours. Return calls and reply to text messages within appropriate time frames to immediately service the business needs at Liberty and the needs of participants., • B.A. and/or 3 years of valid experience., • The desired work experience would include working with Adults and/or managing challenging behaviors with adults., • This position requires actively pursuing the RBT Credential (i.e., measurable progress toward obtaining the RBT Credential through the BACB) or already being registered with the BACB as an RBT., • Excellent interpersonal & communication skills (i.e., verbal & written skills)., • Possess a driver’s license with reliable transportation and auto insurance for driving to, • and from location with clients., • Obey all local, state, & federal laws & rules when working with participants and when transporting participants., • Utilize a working cell phone to complete time management requirements as required by this position., • Demonstrate basic typing & writing skills when completing necessary paperwork as required., • Mileage Stipend, • Medical/Dental/Vision Insurance, • 401k Salary, • $21-$25

Job Description The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. Overview The Financial Analyst plays a key role in enhancing manufacturing performance through advanced cost and productivity analytics. Reporting to the Costing Manager, this role bridges costing, production, and supply chain functions to deliver sharper insights into operational efficiency, materials utilization, and inventory management. The position focuses on improving visibility and control over WIP (Work in Process), semi-finished goods, and finished goods — with the ultimate goal of shortening lead times, optimizing resource use, reducing waste, and strengthening the bottom line. Key Responsibilities • Cost and Productivity Analytics, • Refine current cost analysis frameworks to identify key productivity drivers, inefficiencies, and cost variances across manufacturing operations., • Develop dashboards and analytical tools that integrate cost, inventory, and productivity data for management reporting., • Lead deep-dive analytics on material usage, yield, and production efficiency to recommend cost-saving initiatives., • Support the cost manager in developing cost models that align operational performance with financial results., • Manufacturing Performance Improvement, • Collaborate with operations and planning teams to streamline production processes and eliminate non-value-added activities., • Analyze workflow bottlenecks to reduce cycle time and enhance throughput., • Propose data-driven solutions to improve machine utilization, labor productivity, and process flow., • Drive cross-functional continuous improvement initiatives that directly impact manufacturing performance and cost efficiency., • Inventory and Materials Management, • Build visibility across the full inventory chain - from raw materials to finished goods - and identify opportunities to control on materials consumption, write-offs, and returns to prevent loss and ensure data accuracy., • Partner with Quality team and warehouse teams to optimize stock levels and ensure timely material availability for production., • Inter-Company Transactions & Cost Adjustments, • Review and reconcile inter-company purchase flows, transfers, and related adjustments to ensure accuracy in cost attribution., • Automate and standardize the reporting across plants and business units., • Monitor the financial impact of material write-offs and reclassifications, ensuring meeting GAAP requirement., • Data, Reporting & Insights, • Present insights and recommendations to senior management on trends, cost performance, and improvement opportunities., • Demonstrate passion for costing and productivity analytics, paired with a results-driven, can-do attitude and a hands-on approach to engaging cross-functional teams to turn insights into measurable improvements, • Bachelor's degree in Industrial Engineering, Finance, Manufacturing, or related field (Master's or MBA preferred)., • 10+ years of experience in manufacturing cost analysis, productivity improvement, or operations analytics., • Strong understanding of cost structures, WIP control, and inventory accounting in a manufacturing environment., • Advanced analytical and reporting skills using tools such as Power BI, Tableau, Excel, or SQL. Experience with ERP systems (SAP, Oracle, or equivalent) and manufacturing data models., • Reduction in WIP and total inventory value., • Shortened production cycle and lead times., • Increased material yield and lower write-off rates., • Improved accuracy of cost and variance reporting. RIDE is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, national origin, ancestry, sex, gender, gender identity, pregnancy, childbirth or related medical condition, religious creed, physical disability, mental disability, age, medical condition, marital status, veteran status, sexual orientation, genetic information or any other characteristic protected by federal, state or local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment.

Job Description The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. Overview The Senior Productivity Analyst plays a key role in enhancing manufacturing performance through advanced cost and productivity analytics. Reporting to the Costing Manager, this role bridges costing, production, and supply chain functions to deliver sharper insights into operational efficiency, materials utilization, and inventory management. The position focuses on improving visibility and control over WIP (Work in Process), semi-finished goods, and finished goods — with the ultimate goal of shortening lead times, optimizing resource use, reducing waste, and strengthening the bottom line. Key Responsibilities • Cost and Productivity Analytics, • Refine current cost analysis frameworks to identify key productivity drivers, inefficiencies, and cost variances across manufacturing operations., • Develop dashboards and analytical tools that integrate cost, inventory, and productivity data for management reporting., • Lead deep-dive analytics on material usage, yield, and production efficiency to recommend cost-saving initiatives., • Support the cost manager in developing cost models that align operational performance with financial results., • Manufacturing Performance Improvement, • Collaborate with operations and planning teams to streamline production processes and eliminate non-value-added activities., • Analyze workflow bottlenecks to reduce cycle time and enhance throughput., • Propose data-driven solutions to improve machine utilization, labor productivity, and process flow., • Drive cross-functional continuous improvement initiatives that directly impact manufacturing performance and cost efficiency., • Inventory and Materials Management, • Build visibility across the full inventory chain - from raw materials to finished goods - and identify opportunities to control on materials consumption, write-offs, and returns to prevent loss and ensure data accuracy., • Partner with Quality team and warehouse teams to optimize stock levels and ensure timely material availability for production., • Inter-Company Transactions & Cost Adjustments, • Review and reconcile inter-company purchase flows, transfers, and related adjustments to ensure accuracy in cost attribution., • Automate and standardize the reporting across plants and business units., • Monitor the financial impact of material write-offs and reclassifications, ensuring meeting GAAP requirement., • Data, Reporting & Insights, • Present insights and recommendations to senior management on trends, cost performance, and improvement opportunities., • Demonstrate passion for costing and productivity analytics, paired with a results-driven, can-do attitude and a hands-on approach to engaging cross-functional teams to turn insights into measurable improvements, • Bachelor's degree in Industrial Engineering, Finance, Manufacturing, or related field (Master's or MBA preferred)., • 10+ years of experience in manufacturing cost analysis, productivity improvement, or operations analytics., • Strong understanding of cost structures, WIP control, and inventory accounting in a manufacturing environment., • Advanced analytical and reporting skills using tools such as Power BI, Tableau, Excel, or SQL. Experience with ERP systems (SAP, Oracle, or equivalent) and manufacturing data models., • Reduction in WIP and total inventory value., • Shortened production cycle and lead times., • Increased material yield and lower write-off rates., • Improved accuracy of cost and variance reporting. RIDE is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, national origin, ancestry, sex, gender, gender identity, pregnancy, childbirth or related medical condition, religious creed, physical disability, mental disability, age, medical condition, marital status, veteran status, sexual orientation, genetic information or any other characteristic protected by federal, state or local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment.

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. If this sounds like the kind of environment where you can thrive, keep reading! The Digital Modernization Sector brings together our digital transformation and IT programs, allowing us to better serve our customers through scale and repeatability. (Group Profile/Link to Group page) - Your greatest work is ahead! The NISC IV program at Leidos is looking for an Occupational Safety Health Analyst to work in Palmdale, CA OR Reno/Sparks, NV! The selected candidate will: * Take effective steps to ensure that workplace conditions comply with applicable federal and state Occupational Safety and Health standard provisions of any labor agreement, ensuring that all required records are prepared and maintained. * Participates in Occupational Safety and Health Administration (OSHA) inspections and in any procedures that may follow a citation. * Investigates, prepares, and forwards as required. * Reports on injuries and fatalities. * Conducts safe work procedures training courses. Primary Responsibilities: * This position will support the Federal Aviation Administration (FAA), Air Traffic Organization (ATO), Western Service Area (WSA) Environmental, Occupational Safety & Health (EOSH) Program and assist the District Safety and Environmental Compliance Managers (SECMs) for the Los Angeles (LAX) District. * The candidate will support the customer’s Asbestos, Lead, Environmental Compliance, OSH Compliance, Confined Space, Fall Protection, Safety Training, Drinking Water, Indoor Air Quality (IAQ), and Pandemic programs. * The candidate will participate in EOSH investigations related to potential accidental releases, mishaps, and employee complaints, as requested by the Safety & Environmental Compliance Manager (SECM). Travel estimate up to 50% Must be able to work onsite in Palmdale, CA OR Reno/Sparks, NV. Required Qualifications: * Working knowledge and proficiency utilizing Microsoft Office applications to include MS Word, MS Excel, MS Office and MS PowerPoint. * The position requires the candidate to travel approximately 25% – 50% in support of Los Angeles (LAX) District. * Ability to obtain and/or maintain Public Trust Security clearance. * Bachelors degree with 4+ years of relevant work experience OR Masters with 2+ years of relevant work experience. Additional years of relevant work experience may be accepted/considered in lieu of degree. Preferred Qualifications: * Certified Industrial Hygienist (CIH), Certified Safety Professional (CSP), OR Associated Safety Professional is highly desired. * Certified in any of the following areas is a plus: Asbestos Hazard Emergency Response Act (AHERA) Asbestos Contractor/ Supervisor; AHERA Asbestos Building Inspector; Certified Lead Professional; Lead Inspector/ Risk Assessor; and Hazardous Waste Operations and Emergency Response (HAZWOPER). * Able to be fit-tested and wear respirator, and be enrolled in Respiratory Protection Program (if hired). * Able to meet all requirements necessary to climb structures and oversee Fall Protection Program. * Confined Space assessment experience, program administration experience; Forklift Operator, Forklift Instructor; Aerial Lift Operator, and Aerial Lift Instructor Experience, are desired. * Highly developed presentation skills, comfortable conducting training classes, self-motivated and proactive team player, and excellent written and oral communication skills. Please Note: The program budget salary for this role could fall anywhere between $85,000 to $95,000 with a slight wiggle room (no guarantees) based on relevant experience and assessment. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. Leidos is growing! Connect with us on LinkedIn and Facebook. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:February 5, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit . Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at . Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description PDS Defense, Inc. is seeking a Manufacturing Analyst 1, in Palmdale, CA. Pay Rate: $34 - $40hr Contract duration 6 months Job Description: The Associate Manufacturing Analyst/ Manufacturing Analyst job duties involve supporting production, business, and other processes in a team-based manufacturing environment. Performs activities in various cross-functional areas, including production planning and control, total quality management, systems, manufacturing, equipment and facilities engineering, material management, and process reengineering. The incumbent may facilitate self-directed work teams, provide training in core skill areas to teams and peers, and interact with internal and external customers with respect to product planning, problem resolution, and process improvement. Incumbents are generally experienced in one or more areas of manufacturing operations. The ideal candidate will support Palmdale, CA's F-35 Assembly Tooling organization. Working collaboratively with diverse disciplines in a team-based manufacturing environment, the candidate will execute activities across various functional areas. Responsibilities include Tracking daily costs, Administering EVM (earned value management) activities, Maintaining visibility charts, and Providing weekly and monthly status reports. The role entails closing and documenting tool orders for PMC assembly tooling, overseeing the validation of incoming materials against the bill of material, and developing internal tooling packages. Additionally, the candidate will liaise with support organizations to negotiate schedules with Production, Manufacturing, and Industrial Engineering. Duties encompass ordering and recording chemical usage, ensuring proper inventory within the NGC Chemical Tracking system, and managing tool control and accountability activities, including daily inventory, audits, property, and asset management. The candidate may also handle other manufacturing and assembly tooling-related duties as required. The candidate will be responsible for technical administrative tasks including but not limited to certification compliance, staff meetings, team engagement support, onboarding, concur travel support, and safety focal tasks. Core Competencies • Manufacturing Methods - Knowledge of manufacturing, methods, and fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition, and control systems). Ability to select the best method of producing parts, tools, or assemblies. Verifiable performance record that includes the various aspects of assembly line operation, • Project Management - Successful project management and leadership experience. Coordinate design and fabrication requirements for tools and fixtures with internal and external customers. Basic Qualifications Manufacturing Analyst: • Bachelor's degree with 3 years of experience OR Master's Degree with 1 year of experience OR 7 years of relevant experience in lieu of degree., • Ability to obtain and maintain a DoD Secret clearance., • Ability to work any shift., • Intermediate to Advanced Microsoft Suite capabilities (Excel, PowerPoint, Word), • Must be highly detail-oriented, organized, proactive, and a skilled communicator. Preferred Qualifications: • Experience in a manufacturing environment., • Cost account management, • Advanced Microsoft Suite capabilities (Excel, PowerPoint, Word) Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter. Company DescriptionPDS Defense offers talent acquisition and SOW/Engineering solutions in the aerospace, defense, machinery, communications, energy, technology and service industries. We’re focused on developing strong, lasting relationships with our customers to deliver creative and comprehensive solutions that support their talent acquisition strategies. Our flexible business model allows us to provide not only solutions for contract and direct opportunities, but also offload engineering design services, SOW projects, and more.PDS Defense offers talent acquisition and SOW/Engineering solutions in the aerospace, defense, machinery, communications, energy, technology and service industries.\r\n\r\nWe’re focused on developing strong, lasting relationships with our customers to deliver creative and comprehensive solutions that support their talent acquisition strategies. Our flexible business model allows us to provide not only solutions for contract and direct opportunities, but also offload engineering design services, SOW projects, and more.

Job Description Title: Manufacturing Analyst I LOCATION: Palmdale CA DURATION: 6month contract PAY:$41.35 * Job Description: The Associate Manufacturing Analyst/ Manufacturing Analyst job duties involve supporting production, business, and other processes in a team-based manufacturing environment. Performs activities in various cross-functional areas, including production planning and control, total quality management, systems, manufacturing, equipment and facilities engineering, material management, and process reengineering. The incumbent may facilitate self-directed work teams, provide training in core skill areas to teams and peers, and interact with internal and external customers with respect to product planning, problem resolution, and process improvement. Incumbents are generally experienced in one or more areas of manufacturing operations. Responsibilities: The ideal candidate will support Palmdale, CA's F-35 Assembly Tooling organization. Working collaboratively with diverse disciplines in a team-based manufacturing environment, the candidate will execute activities across various functional areas. Responsibilities include Tracking daily costs, Administering EVM (earned value management) activities, Maintaining visibility charts, and Providing weekly and monthly status reports. The role entails closing and documenting tool orders for PMC assembly tooling, overseeing the validation of incoming materials against the bill of material, and developing internal tooling packages. Additionally, the candidate will liaise with support organizations to negotiate schedules with Production, Manufacturing, and Industrial Engineering. Duties encompass ordering and recording chemical usage, ensuring proper inventory within the Chemical Tracking system, and managing tool control and accountability activities, including daily inventory, audits, property, and asset management. The candidate may also handle other manufacturing and assembly tooling-related duties as required. The candidate will be responsible for technical administrative tasks including but not limited to certification compliance, staff meetings, team engagement support, onboarding, concur travel support, and safety focal tasks. Core Competencies • Manufacturing Methods - Knowledge of manufacturing, methods, and fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition, and control systems). Ability to select the best method of producing parts, tools, or assemblies. Verifiable performance record that includes the various aspects of assembly line operation, • Project Management - Successful project management and leadership experience. Coordinate design and fabrication requirements for tools and fixtures with internal and external customers. Basic Qualifications Manufacturing Analyst: • Bachelor's degree with 3 years of experience OR Master's Degree with 1 year of experience OR 7 years of relevant experience in lieu of degree., • Ability to obtain and maintain a DoD Secret clearance., • Ability to work any shift., • Intermediate to Advanced Microsoft Suite capabilities (Excel, PowerPoint, Word), • Must be highly detail-oriented, organized, proactive, and a skilled communicator. Preferred Qualifications: • Experience in a manufacturing environment., • Cost account management, • Advanced Microsoft Suite capabilities (Excel, PowerPoint, Word) Company DescriptionAbout us: The Norland Group has been in operation successfully since 1996. We are a strong believer of people management, professionalism and accountability. We only make promises when we are certain we can fulfill them. Our business focuses on fulfilling the needs of commercial and government customers in administrative services, workforce mobilization, information technology, engineering, project management services. Our Mission Statement Our main goal is to provide career advancement opportunities to our associates. We are committed to bringing our customers exceptional support services with the highest quality, integrity, and innovation. We believe that we are the stepping stone for our associates to advance their careers and to live a better life. Everyone should have a chance to live a successful and happy life. We operate our business based on those values and we choose employees who value the same principles.About us:\r\n\r\nThe Norland Group has been in operation successfully since 1996. We are a strong believer of people management, professionalism and accountability. We only make promises when we are certain we can fulfill them. Our business focuses on fulfilling the needs of commercial and government customers in administrative services, workforce mobilization, information technology, engineering, project management services.\r\nOur Mission Statement\r\n\r\nOur main goal is to provide career advancement opportunities to our associates. We are committed to bringing our customers exceptional support services with the highest quality, integrity, and innovation. We believe that we are the stepping stone for our associates to advance their careers and to live a better life. Everyone should have a chance to live a successful and happy life. We operate our business based on those values and we choose employees who value the same principles.

Job DescriptionJob Title: Manufacturing AnalystJob Description The Manufacturing Analyst will support production and tooling operations in a dynamic, team-based manufacturing environment. The focus will be on cost tracking, earned value management (EVM), reporting, tooling coordination, and providing technical and administrative support. This role involves working cross-functionally with Production, Manufacturing, Industrial Engineering, and support organizations to ensure tooling orders, materials, schedules, and inventory are effectively managed. Responsibilities • Track daily costs and administer Earned Value Management (EVM)., • Prepare and maintain visibility charts and weekly/monthly status reports., • Close, document, and manage assembly tooling orders and internal tooling packages., • Validate incoming materials against bills of material (BOM)., • Coordinate tooling schedules with Production, Manufacturing, and Industrial Engineering., • Manage chemical ordering and inventory using internal tracking systems., • Perform tool control, accountability, inventory audits, and asset/property management., • Provide technical and administrative support including certification compliance, onboarding, travel support, and safety activities.Essential Skills, • Bachelor’s degree with 3+ years of experience, Master’s degree with 1+ year, or 7+ years of relevant experience in lieu of a degree., • Ability to obtain and maintain a DoD Secret clearance., • Experience supporting manufacturing or production environments., • Strong Microsoft Excel, PowerPoint, and Word skills., • Knowledge of manufacturing methods and project management principles.Additional Skills & Qualifications, • Previous experience supporting aerospace or defense manufacturing programs., • Familiarity with Earned Value Management (EVM) environments., • Cost account or budget tracking experience., • Advanced Microsoft Excel skills (formulas, data analysis, reporting). Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Palmdale,CA. Application Deadline This position is anticipated to close on Mar 18, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.