Trabajos computer en Milwaukee, Wisconsin - Page 4Crear alertas

Job DescriptionCompany Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Job Description Position Purpose: Reports to the Operations Director. Directs the wastewater treatment/ biosolids operations and the energy utilization processes at Jones Island WRFs to ensure safe continuity of operations, the execution of proper technical procedures and management policies that result in cost-effective Veolia contract compliance and compliance with all applicable permits and regulations. Provides an operational and plant communications interface with the Field and Deep Tunnel Collection Systems Console Operators. Special dimensions of this position are delineated by an emphasis on continuity for operations, communication with operators and maintenance, and relief responsibility for the other major operations supervisory positions at both SSWRF and JIWRF. Primary Duties/Responsibilities: • Process Control & Optimization:, • Directs plant wastewater, biosolids and energy utilization and power generation processes to ensure safe, cost effective and efficient operations to meet Veolia contract and all regulatory requirements., • Monitor operating conditions at both plants to ensure optimum liquid/solids treatment. Optimizes the processes at the plants, within the process and technical limitations of the systems., • Institute process and or operational changes, as required, to meet permit and contract goals. Communicates to operations personnel the purpose of the change.., • Provides recommendations for improving operations, cost reductions and energy savings., • Staffing & Relief Duties:, • With Admin staff, effectively schedules shift operations training, shift supervisor replacement and training and coverage for special events., • Designated as the main relief for the Shift Supervisor position at JI for vacation, sick, and vacancies., • Provide on-call support for shift supervisors in the off-hours., • Administers management policies and directives., • Trains staff across a broad range of technical and procedural activities, on-the-job practices and execution of Standard Operating Procedures and process directives., • Administers discipline as required and participates in the performance evaluation of Plant personnel – shift supervisors., • Acts as the key participant in the hiring/interviewing process of department staff., • Assists in the grievance resolution process, as needed., • Safety Duties:, • Promotes safety practices and procedures by training coaching, and leading the shift workers in safety training., • Administer Safety Action Plan objectives and monitors progress with Shift Supervisors of daily, weekly, monthly, and quarterly safety tasks. Schedule and coordinate Safety Stand Downs for JI and SS, • Inspects facilities for cleanliness, housekeeping, unsafe conditions, and conducts investigation of safety incidents or accidents., • Reports unsafe conditions and helps file reports on injuries., • Equipment Availability and Maintenance Duties:, • Authors/scopes out work orders and properly communicates to plant maintenance supervisors, applying knowledge and experience to identify, diagnose and troubleshoot the source of the problem with recommended remedial action., • Initiates/sustains critical coordination/communication with project maintenance planners/ supervisors to insure critical equipment availability; provide ops coordination/continuity on large maintenance projects., • Provides operational support to Project Technical Services and capital project contractors in equipment checkouts, performance tests and startup of new processes/equipment., • Wet Weather and Emergency Situation Duties:, • Reacts prudently and appropriately to unpredictable emergencies and situations created by plant capital construction interferences, weather, power outages and equipment failures in order to prevent human injury, equipment damage or permit violations., • This job is largely performed in an office and plant environment., • The employee is occasionally exposed to outside weather conditions., • The noise level in the work environment is usually moderate.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Associates Degree or higher or academic courses in the environmental field preferred., • Five years of applicable work experience in an industrial process environment required., • 3-5 years of work experience in broad range of wastewater, water, biosolids, environmental or plant operating engineer fields desirable., • 2-3 years of experience as a supervisor or manager required., • Ability to handle emergency situations with proper training required., • Sufficient skills/ability to function as an Incident Commander in emergency response situations required., • Strong mechanical and technical aptitude required., • Demonstrated knowledge and skills in wastewater equipment maintenance and troubleshooting desired., • Requires superior interpersonal and communication skills, and the ability to develop and maintain good working relationships with client, public, and employees., • Ability to effectively train individuals and groups both in the classroom and on the job required., • Must possess superior organizational skills and be able to prioritize and work simultaneously on several projects., • Ability to operate within a team atmosphere required., • Ability to assess priorities frequently and effectively perform under pressure required., • Ability to operate computer and other office machines as needed., • Strong mathematics and computer skills including email, word processing, and spreadsheets required., • WDNR Advanced Operator Certification required and license in applicable subclasses preferred. Completion of certification in applicable subclasses within two years in this position required., • While performing the duties of this job, the employee is regularly required to talk or hear., • The employee is frequently required to stand; walk; climb stairs or ladders; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell., • The employee may occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include ability to distinguish color, close vision and distance vision. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description GENERAL SUMMARY: Comprehensive Community Services (CCS) is a recovery-focused behavioral health program for adults with severe mental illness &/or substance use disorders. CCS is a community-based program in which the majority of services are provided in clients’ homes & communities. The program is person-centered and uses client-directed service plans to describe the individualized services that will support the consumer in achieving their recovery goals. Services are provided by teams of professionals, peer specialists, and natural supports which are coordinated by a CCS Care Coordinator. Care Coordinators help develop skills for independence, leadership, confidence, and empower individuals to take ownership of their lives and achieve their goals. ESSENTIAL FUNCTIONS: • Provides care coordination services to each client throughout the duration of enrollment in CCS services by educating consumers/clients on how to utilize community supports, both formal and informal., • Accepts referrals of eligible consumers/clients and initiates the process to assess strengths and needs in a timely manner., • Facilitates team meetings to develop a care plan based on strengths, values, and preferences., • Assists the team in establishing measurable consume/client outcomes and reduce any system barriers that may arise., • Documents consumer/client plans, collects consumer/client outcome data, and prepares all documentation according to program required time frames., • Facilitates annual Functional Screens to ensure consumers/clients meet eligibility requirements., • Carries a caseload ranging between 15-18, based on needs of consumers/clients., • Attends training and ongoing staff development opportunities., • Adheres to St. Charles Youth & Family Services Policies and Procedures., • Other duties as assigned.MINIMUM KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:, • Bachelor’s degree required; Master’s degree preferred in a relevant area of education or human services., • 1 year experience working in a mental health related setting., • Knowledge of individual and family issues and dynamics., • Ability to prepare formal reports., • Ability to display cultural competence and sensitivity to the populations we service by responding respectfully and effectively to people of all cultures, socioeconomic characteristics, languages, classes, races, ethnic backgrounds, religions, and other diversity factors., • Strong verbal and written communication skills., • Valid Wisconsin driver’s license and liability insurance., • Ability to use vehicles for work related duties according to the agency’s insurance liability standards., • Ability to accurately perform record keeping and documentation entries and do so within the required time frame., • Working knowledge of computer applications preferred.WORKING CONDITIONS, • General office environment/multiple locations to include community sites and client’s homes. St. Charles Youth & Family Services, Inc. is an Affirmative Action/Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Employee discounts, • Flexible schedule, • Opportunity for advancement, • Signing bonus $150 Sign-On Bonus for new employees! Terms apply What you need: • 2+ seasons of previous experience completing individual, trust, and/or partnership tax returns, • Passion for providing extraordinary customer service, • Excellent communication and interpersonal skills, • Ability to thrive in a fast-paced work environment, • Basic computer skills, • Willingness to learn, • Experience in accounting, finance, retail, bookkeeping, or taxesAdditional Perks:, • Full-time and part-time positions are available, • Flexible Schedule Options Work that works for you!, • Work Lotto (Win money for logged shifts), • Low-cost benefits (healthcare, dental & vision), • Teladoc (Unlimited Teladoc sessions for you and your whole household for $18 per month), • Free identity theft protection, • Corporate discount program, • Free tax preparation training and PTIN registration reimbursement, • Referral bonus opportunities are available for referring qualified candidates, • Free continuing tax education, • Enrolled Agent materials and testing reimbursement, • Opportunities for advancement within the organization, • Employee referral program & sign-on bonus for new Tax Preparers (terms apply), • Medical & Prescription benefit option (eligible to participate after working 1,560 hours annually), • 401k with Company Match (eligible to participate after working the first 1,000 hours) If you're looking for a rewarding opportunity to learn new skills and make an impact, apply today

Job Description Love numbers? Lets turn that into income. Become a tax preparer with Tambridge! No experience? No problem. WE TRAIN YOU! WHAT YOU'LL BE DOING? • prepare and file individual and small business tax returns., • collect, review, and verify client documents. (w2, 1099, expenses, etc), • ensure accuracy and compliance with IRS regulations and guidelines., • communicate with clients about missing or needed information., • Maintain client confidentiality and professionalism at all times. WHAT WE'RE LOOKING FOR: • Strong attention to detail, • Basic computer and customer service skills, • Ability to work independently and meet deadlines, • Willingness to learn, • Tax experience is a plus,but not required WHY JOIN US: • Flexible schedule/ remote opportunity, • Training + ongoing support, • Room for growth and advancement

Job Description Since 1893, AGI Fabricators has led the way in metal fabrication, offering career growth in a collaborative culture where expert craftsmanship meets cutting-edge technology. As Southeast Wisconsin’s largest locally owned mechanical contractor, TOTAL Mechanical delivers comprehensive, mission-critical solutions—from construction and automation to maintenance and emergency services—with an uncompromising commitment to customer service. Work Location: AGI Fabricators – Milwaukee Division: Manufacturing (Full Time, Exempt) Under the direction of the Operations Manager, the Estimator is responsible for supporting the project bidding process by preparing accurate and competitive cost estimates for custom fabrication projects in industrial and commercial sectors. Qualifications • Education: High School Diploma or GED and/or a degree of certification in Mechanical Engineering, Construction Management, or related field preferred, • Years of Relevant Work Experience: 3+ years’ experience in estimating within a custom fabrication or industrial fabrication environment, • Understand Project. Review project documentation and discuss with salesperson., • Prepare Estimate. Utilize estimating software to detail cost estimates such as QuickPen, Autobid Mechanical, and Tekla Powerfab, obtain bids from vendors/subcontractors, and achieve customer/Company expectations., • Turnovers. Prepare project documentation, participate in meetings, and assist in preparation of project drawings., • Maintain/Enhance Estimating System and Procedures. Perform periodic reviews of actual vs estimated costs and adjust estimating system to improve accuracy., • Bid Tracer. Enter bid requests and communication bid participation to customers., • Medical, Dental, and Vision Insurance, • 401K Retirement Plan, • Paid Time Off and Paid Holidays Total Mechanical is an Equal Opportunity Employer

Job Description Resident Care Director / Wellness Director StoryPoint Mequon Position Summary: The Wellness Director is responsible for the overall direction, administration and coordination of clinical resident care services by delivering a 1440 experience, optimizing performance and leading employee connections within our community. Required Experience for Wellness Director: • Licensed Practical Nurse (LPN) or Registered Nurse (RN) registered within the State preferred. CDP required prior to or upon hire within 90 days. Assisted Living/Memory Care experience preferred., • Leadership experience preferred., • Proven ability to manage revenue and financials successfully., • Proven high performer., • Lead, manage, and overall accountability for your team and their performance., • Revenue for Wellness, Evaluations & Care Conferences and Service Plans: Responsible for ensuring right care, at the right price with the right staff., • Alzheimer and Dementia Program Coordinator., • Understanding and leading to our 1440 care standards., • Clear Communication of Vision: Ability to translate how our organizational, community and wellness goals relate to our team, staff and residents., • Wellness Marketing: Own the relationships with your Executive Director and Sales Team and market wellness throughout the community by increasing, visibility, credibility and trust., • Perform admission and ongoing evaluations of residents every 6 months, upon return from Hospital or skilled environment, or change of condition (initiate care conference) and use this information to set measurable goals and outcomes for residents that meet the physical, mental, and psychosocial needs., • Manage all appropriate state regulations and auditing to ensure our community is in compliance., • Obtain written orders for any necessary changes to care plan., • Verification of MARS/TARS and communicate with pharmacy to assure accuracy of medication and treatment administration., • Reviews incident reports submitted by staff members to determine if an assessment/care conference needs to be performed on an existing resident & address any personnel issues which are identified., • Communication of all emergency policies and provision of updated information to staff., • Work toward continual improvement of the overall organization., • Available to work a flexible schedule including on call, weekends, and holidays when necessary., • Applying knowledge of our business and competition to advance organization., • Managing complex situations, • Building strong resident relationships, 1440 Care Standards., • Consistently achieves results, even under tough circumstances., • Planning, scheduling and prioritizing to meet community needs, • Building strong teams and applying a diverse skill set to achieve goals, • Managing conflict resourcefully while minimizing drama., • Sharing our vision and strategy to motivate others to action., • Relating openly and comfortably with diverse groups of people., • Understanding our organizational structure and navigates through policies, regulations, functional, community and home office team relationships., • Communicating clearly and frequently., • Stepping up to address difficult issues, saying what needs to be said. This position entails standing for long periods of time. While performing the duties of this job, the employee is required to communicate effectively with others, sit, stand, walk and use hands to handle keyboard, telephone, paper, files, and other equipment and objects. The employee is occasionally required to reach with hands and arms. This position requires the ability to review detailed documents and read computer screens. The employee will occasionally lift and/or move up to 25 pounds. The work environment requires appropriate interaction with others. The noise level in the work environment is moderate. Occasional travel to different locations may be required. We have comprehensive benefit packages that include health, dental, vision, 401(k), income protection, and extraordinary work- life benefits. This classification description is intended to indicate the general kinds of tasks and levels of work difficulty that are required of positions given this title and should not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct and control the work of the employees under her/his supervision. The use of a particular expression or illustration describing duties shall not exclude other duties not mentioned that are of a similar kind or level of difficulty. Equal Opportunity Employer #SP1

Job Description Title: Full-Stack Developer Reports To: Senior Project Manager Start Date: ASAP Location: Milwaukee, WI 53224 100% IN PERSON (NO REMOTE OPPORTUNITIES AVAILABLE AT THIS TIME) We are seeking a Full-Stack Developer to join our team! Mindful Measures, Inc. is a software development firm dedicated to the development and production of useful workforce analytical tools. With a focus on time & attendance and the visual display of quantitive information, Mindful Measures, Inc. develops products that make life in the workplace fair and unbiased. Responsibilities and Tasks: * Writes code, completes programming, and performs testing and debugging of applications using current programming languages and technologies. * Interacts with product managers and/or users to define system requirements and/or necessary modifications. * Participates in software design meetings and analyzes user needs to determine technical requirements. * Writes technical specifications based on conceptual design and stated business requirements. * Completes documentation and procedures for installation and maintenance. * Trains and communicates with internal Client Training, Client Relationship, and Sales teams on systems application. * May be responsible to develop or execute project plans, budgets, and schedules and for documenting work and results. * May deliver informational and decision-seeking presentations to technical and business groups to internal and/or external audiences. Performs additional related duties as assigned. Skills & Qualifications: * Ability to visualize a proposed system and be able to build it * Front-end technology: Expertise in front-end technologies, including JavaScript, CSS3 and HTML5 and third-party libraries such as React Js, Angular, jQuery and LESS * Development languages: Knowledge of server-side programming languages including Net, Java, Ruby and Python * Database and cache: Familiarity with DBMS technology, including SQLServer, Oracle, MongoDB and MySQL and caching mechanisms such as Redis, Memcached and Varnish * Basic design ability: Including knowledge of UI/UX and basic prototype design * Server: Experience working with Nginx or Apache servers with a solid background in Linux * Excellent writing and communication skills Knowledge and Education: * Bachelor’s Degree in Computer Science * 1-2 years of experience * Industry certifications such as HTML, CSS, JavaScrpt, C#, Python or similar

Job Description Our Mission: Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Fabricate and refurbish wire rope slings and other lifting assemblies. Key Duties and Responsibilities: • Fabricate and repair wire rope slings and assemblies; and, • Achieve qualification as an apprentice (minimum) or journeyman splicer., • Use testing software to test fabricated products (chains, wire ropes, slings) for strength and quality., • Re-webbing and re-certifying slings., • Perform other functions as required. Job Requirements: • Must have experience in manufacturing role working with various tools., • Must be able to lift up to 70 pounds., • Must be comfortable standing for extended periods of time., • Must be computer-literate in order to operate testing software (software can be learned with basic computer knowledge), • Must be authorized to work in the United States without sponsorship, • Must be at least 18 years of age Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We’re ready to help you start your new career path.

Job Description Bosch Building Technologies – Technician II Security About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This Technician II Security position will provide efficient and high-quality installations related to integrated security systems. Responsibilities include, but are not limited to performing startup, installation, closeout and service of jobs; assisting in design and other tasks as assigned Responsibilities: • Installs, terminates and tests equipment as per specifications and in conjunction with any pertaining building and or electrical codes., • Responsible for training apprentices on Company procedures, systems, and installation techniques., • Work with Field Engineers on startup to ensure complete system compliance., • Daily communications with Installation Supervisor on delays, requirements, and general status of jobs to ensure delivery of the project, • Work with Installation Supervisor to ensure complete closeout and turnover of jobs to the client and service department, • Repair, restore and test all systems per specifications and in conjunction with any pertaining building and or electrical codes., • Accurate written record keeping, submitted on time and complete,, • Maintain professional licensing as required by State and Local jurisdictions, • Support, lead, and mentor team members, • Design systems and layout, • Maintain a high level of safety and professionalism, • Lead projects at a site level, manage a team of junior technicians as necessary, • Valid drivers license with acceptable driving record., • Ability to pass pre-employment screening, • Minimum 2 years working in the electronic field with daily use of AC/DC theory, • Ability to read blue prints and schematics as evidenced by 1 year of experience, • Basic computer skills including MS Office Suite as evidenced by 1 year of experience, • Associates degree (2 year) in a technical capacity is desirable, • Industry Experience: Healthcare, Education, Manufacturing, Utilities, Financial & Hospitality., • Video Surveillance: Avigilon, Genetec, Milestone, Bosch, Axis, Hanwha, Exacq., • Access Control: Lenel, Software House, Avigilon, Genetec, Identiv, Honeywell, Open Path, RS2, S2, AMAG, Gallagher, Open Options., • Intrusion: DMP, DSC, Honeywell, Bosch., • Locking Hardware: Maglocks, Strikes, Mortise, Cylindrical, ADA applications., • Data Terminations, • Experience with programing, testing and training end users on various security systems., • Out of town travel work if required. Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • While performing the duties of this job, the employee will be exposed to outdoor weather conditions, work on job sites, may be required to travel to and from job site locations, may work in a typical office environment, and is occasionally exposed to construction equipment. The noise level in the work environment is usually moderate. Confined space entry may be required. High work may be required. Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements:, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionCompany Description We help job seekers and career changers prepare for and advance in careers with a focus on sustainable, high-growth, high-demand industries. Our committed and well-trained workforce professionals deliver comprehensive workforce solutions at integrated career centers, sector-focused centers and community, and partner sites. Job Description • Meets with participants to identify barriers to employment and develop strategies to manage these issues, • Maintains regular contact with caseload to provide guidance and referrals to help participant retain employment, • Maintains complete, accurate and timely case notes and related records in manual and/or electronic systems, • Creates, updates, and completes of job seeker activities, document in appropriate systems according to contract deadlines, • Facilitates and delivers job readiness curriculum to participants, • Develops resumes with participants and maintains roster of resumes for participants seeking employment, • Creates and maintains employer contacts, • Develops and maintains collaborative worksite agreements between program and area employers, • Meets with employers to create a pipeline of employment for participants in program, • Ensures access to supportive services and retention services for participants, • Manages outreach to referrals / participants who fail to show for appointment, • Creates, updates, and ensures completion of plans according to contract deadlines, • Attends scheduled weekly unit meetings, • Works cross-functionally with other Equus programs within designated service area, • Monitors and records job seeker participation in required activities, • Knows, understands, and implements current and future company and contract specific policies, SOPs, and Operations Memos, • Ensures confidentiality of job seeker information and protect and secure company equipment and property, • Authorizes, distributes, and reconciles transportation assistance, • Ensures timely submission and preparation of documentation for scanning, • Utilizes a trauma-informed mindset in all interactions and adopt trauma-responsive practices, • Other duties as assignedQualifications, • Associate degree in related field and minimum two year’s work experience in related field, or a satisfactory equivalent of education and experience, • Knowledgeable about community resources and able to work with and relate to job seekers and be culturally sensitive, • Knowledgeable about Workforce programs and can navigate appropriate state and contract specific system(s), • Ability to work independently/self-starter while remaining in communication, • Computer literate and have MS Word and Excel skills at minimum, and the ability to learn specialized databases and software systems, • Bilingual a plus Additional Information All your information will be kept confidential according to EEO guidelines. Equus Workforce Solutions is a leading provider of workforce development services in North America. With a dedicated and passionate team, Equus puts the industry’s best practices to work by focusing on the development, design, and delivery of demand-driven workforce solutions. When you join Equus, you can expect extensive learning opportunities and networking programs. But most of all you can expect to make a lasting impact on the lives of others. At Equus we are strengthened by diversity. We are committed to providing a work environment in which everyone is included, treated fairly and with respect. Equus Workforce Solutions is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, age, pregnancy, sexual orientation, gender identity, ancestry, religion, national origin, veteran status, physical or mental disability, or reprisal or any other characteristic protected under state, federal, or local law.

Job Description We are TERRA Engineering! If you are seeking a work environment that promotes a collaborative culture, individualized professional development, and opportunities to advance, then TERRA is the place for you! We are currently seeking a Senior Structural Engineer to join our team in Chicago, Milwaukee, Peoria, or St. Louis. If you identify with the expectations of the position listed below, then you are our ideal candidate, and we look forward to reviewing your application! Summary/Objective Applies diverse and innovative techniques, modifications, and theories. Oversees and contributes to the design and preparation of plans, details, construction estimates, code compliance, design calculations, and specifications on a range of site civil project sizes and types. Assists in leading design coordination between various team members, disciplines, and agencies to meet project requirements. Implements and executes Quality Control/Quality Assurance practices. Essential Functions • Participate in project proposals, client interview preparation, and stakeholder presentations; may attend client interviews, • Help determine the project team and staffing requirements for a given assignment or project task, • Coordinate directly with various internal and external disciplines/departments to ensure design process is complete and comprehensive, • Contribute to and supervise team members in the design concepts, studies, design options, and establish design criteria, • Perform complex analyses and design calculations, document design procedures, and ensure design complies with applicable codes and standards, • Assist in leading the preparation of design documents including schematics, design details, calculations, specifications, and utility coordination, • Coordinate the production of project deliverables including plans, specifications, reports, cost estimates, and commissioning documents, • Approve and certify deliverables as the Engineer of Record, • Work with project managers to assure that project schedule, budget and design are consistent with project criteria, • Coordinate and complete permit requirements, • Assist in supervising construction administration activities including resolving construction related issues, disputes, and disagreements, • Supervise the close-out documentation process with contractors, clients, and agencies and identify lessons learned for internal training purposes, • Assist in creating and enforcing the application of TERRA standards and guidelines, • Contribute to authoring marketing materials, • Develop and maintain trusted relationships with team members, multidisciplinary team members, vendors, and authorities having jurisdiction, • Mentor, train, and provide oversight to staff members, • Participate in the recruitment, interviewing, and candidate selection process, • Perform other duties as required Education/Experience • B.S. in civil engineering or related field (ABET/EAC-accredited program), • 8+ years of applicable engineering experience, • PE Required, • Additional credentials preferred (e.g., CFM, CPESC, ENV SP, LEED AP, etc.) Knowledge, Skills, and Abilities • Demonstrates ability to successfully engage with professionals in a multi-disciplinary environment; communicates effectively and builds relationships and trust internally and externally, • Exercises sound engineering judgment, • Strong ability to convey information through effective and timely verbal and written communication, • High level of proficiency with computer-aided design software and other software packages typically associated with engineering required, • Strong proficiency in general documentation software such as Microsoft Suite, Bluebeam, PowerPoint, etc., • Demonstrates effective project management skills, effectively leveraging experience and skills to ensure projects are completed on time and on budget, • Advanced public speaking, presentation, and leadership skills, • Demonstrates understanding of industry and construction practices, methodologies, and best engineering practices and leverages that understanding to lead engineering efforts through all project stages, • Able to conduct site visits as needed, may require a valid driver's license, • Effectively maintains office and field health & safety requirements and protocols, • Maintains a work schedule conducive to team collaboration and project-specific requirements Physical Requirements • Involves sitting a considerable amount of the time, but requires the ability to conduct field/site visits to inspect work, • May exert up to 20 pounds of force occasionally and/or a negligible amount of force to move objects, • Occasionally lifts and carries up to 25 pounds, • Considerable time is spent at a workstation using a computer and using various forms of communication (telephone, email, messaging, etc.), • Field work includes exposure to outside weather conditions and various environmental conditions depending on the site, • Physical activities include walking and occasional stooping and crouching This job description is not designed to cover or contain a comprehensive list of activities, duties and/or responsibilities required of the employee for this position. Duties, responsibilities, and activities may change at any time. Please note that sponsorship is not available now or in the future for this position. About TERRA Engineering Founded in 1992, TERRA Engineering, Ltd. (TERRA) is a woman-owned, full-service engineering firm that also offers Landscape Architecture and Land Surveying expertise. We provide quality services for client-specific solutions within scope, budget, and schedule. TERRA’s mission is to become the Professional Service firm of choice by empowering our employees to be innovative and socially responsible while achieving sustainable and profitable growth. Our multi-disciplinary team brings robust knowledge and diverse experience to our clients’ projects, while also providing innovative and sustainable solutions. Continuous learning, innovation, and collaboration are at the core of TERRA’s culture. We strive to create an environment in which all can comfortably and authentically express their thoughts and ideas and effectively engage with the organization. Each member of our team is an important part of TERRA’s success! TERRA Provides: • Competitive salary, • Major medical, dental and vision insurance, • Flexible Spending Account, • 401K and profit-sharing, • Bonus program, • Paid holidays and generous paid time off, • Public transportation reimbursement (Chicago-based employees), • Opportunities for advancement, • A warm culture that is conducive to growth and professional development The employment policy of TERRA Engineering, Ltd. is to provide equal opportunity to all persons. Our company, therefore, has made a commitment to equal employment opportunity through a positive and continuing affirmative action program. No employee or applicant for employment will be discriminated against because of race, color, religion, sex, national origin, disability, military and/or veteran status, or any other Federal or State legally protected classes. TERRA Engineering, Ltd. will recruit, hire, train and promote qualified individuals in all job titles, and ensure that all other personnel actions are administered without regard to race, color, religion, sex, military and/or veteran status, or disability in accordance with Section 503 of the Rehabilitation Act of 1973, as amended, and the Vietnam Era Veterans Readjustment Assistance Act of 1974, which require affirmative action to ensure equal opportunity in all aspects of employment. TERRA Engineering, Ltd. does not discriminate on the basis of national origin or citizenship status as provided under the Immigration Reform and Control Act of 1986. #LI-CB1

Job Description Atlantic Residential is a private commercial real estate firm based in Atlanta, Georgia with regional offices in Chicago, Milwaukee, and Florida. From the beginning, Atlantic Residential has been a family company. Founded by brothers Richard and Andrew Aaronson in 1995, we’ve since overseen the construction of over $3.0 Billion of institutional quality residential and mixed-use projects, containing over 11,000 residential units. All the while, we’ve committed ourselves to detail, service, and community. At Atlantic Residential, our motto is simple: We Do Yes. Yes, to progress, Yes to breaking boundaries, and Yes to making life better for our communities, residents, and investors. We’re not just a regional developer & manager of luxury apartments--we’re a creative, strategic, and customer-focused team of experts, driven to create incredible communities. We are seeking a highly qualified Leasing Consultant for our fabulous community Reserve at Wauwatosa Village. At Atlantic Residential, you can expect great pay, benefits, paid vacations and holidays, incentive bonuses, and internal growth potential. If you are interested in an excellent opportunity with a dynamic company, please see the details below. POSITION SUMMARY: The Leasing Consultant is responsible for executing the community’s marketing, leasing, and renewal strategies to meet occupancy and revenue goals. This role involves leasing apartments to prospective residents, ensuring resident satisfaction throughout their tenancy, and driving lease renewals. The ideal candidate will provide exceptional customer service, maintain knowledge of the local rental market, and support community engagement efforts. BENEFITS & COMPENSATION: • Competitive salary with commission opportunities., • Health, dental, vision, life, disability, accident, cancer insurance, and 401(k)., • Paid time off and holidays., • Employee housing discounts (if applicable). LEASING & SALES: • Conduct property tours, highlighting community features and amenities to prospective residents., • Respond promptly to leasing inquiries via phone, email, and in-person visits., • Guide prospective residents through the leasing process, from application to move-in., • Build and maintain positive relationships with residents to foster a sense of community., • Address resident concerns and service requests in a timely and professional manner., • Assist with organizing resident events and engagement initiatives to promote retention., • Assist in developing and executing marketing campaigns to attract potential residents., • Create and distribute marketing materials, including social media content., • Collaborate with local businesses and community organizations for partnership opportunities., • Process lease applications, verify references, and conduct background checks., • Ensure compliance with fair housing laws and company policies., • Maintain accurate records of leasing activity, resident communications, and market data., • 1+ years of leasing, sales, customer service, or property management experience preferred., • Strong communication and interpersonal skills., • Ability to handle multiple tasks and prioritize effectively., • Proficiency in leasing software and Microsoft Office Suite., • Knowledge of Fair Housing Laws and leasing best practices., • Prolonged periods sitting at a desk and working on a computer and standing and walking, giving tours, and meeting with potential tenants., • Must be able to lift up to 15 pounds at times., • Must be able to traverse a variety of properties with stairs and in a variety of weather., • Must be able to work weekends and/or evenings on a rotating schedule.

Job Description Branch Finance Manager (Consumer Finance) Growing national consumer finance company! New ownership! Branch Finance Manager career opportunity! Rewards for Branch Finance Manager: • $60,000.00 - $70,000.00 starting salary, • Additional monthly incentive up to $2,500.00, • Full benefits & paid time off, • Career growth potential in multiple areas, • Extensive training & support, • Great software & systems, • Hire, develop & motivate collections & lending team, • Manage collections portfolio delinquency & charge-off, • Lead and oversee underwriting efforts for the assigned branch, • Demonstrate & ensure a high level of customer service, • Help ensure branch compliance, • First-party consumer collections management, • Subprime experience is a plus, • Computer proficiency, • Customer service focus, • No Sundays, • Some early evening & Saturday work hours required, • Consumer Finance Branch Manager, • Rent-to-own Manager, • Title Loan Manager, • Rental Car Manager, • Collections Manager, • Customer Retention Manager, • Related Manager Experience

Job DescriptionDescription: Vierbicher is a team of professional engineers, planners, community development specialists, land surveyors and GIS specialists who provide comprehensive solutions for a wide range of projects. Our goal is to provide clients with creative consulting services and quality products, enabling them to efficiently and effectively meet their goals. We work to build strong relationships with our clients that promote trust, cooperation and teamwork. As a Project Engineer 1, you will be responsible for executing technical civil engineering design and evaluations across diverse projects in Southeastern Wisconsin. You will be instrumental in delivering projects successfully by managing scope, maintaining quality standards, and ensuring work is completed on time and within budget. Key Responsibilities: Design & Engineering Execution • Complete the full design cycle using AutoCAD Civil 3D to create comprehensive site and infrastructure plans. This includes detailed street design (plan & profile, cross-sections), precise grading and erosion control plans, and the engineering of stormwater management, sanitary sewer, and water distribution systems., • Conduct thorough site investigations and due diligence to identify constraints and inform effective design strategies., • Calculate quantity take-offs and develop reliable cost estimates for construction materials and labor., • Prepare and submit all necessary permit applications to local and state agencies., • Ensure compliance with all local ordinances, state codes, engineering guidelines, and best practices., • Technical Proficiency: Entry-level proficiency in AutoCAD Civil 3D is required. Familiarity with other civil engineering design and GIS tools is a plus., • Design & Construction Knowledge: Working knowledge of construction activities, best practices, and the field aspects of site development projects is preferred., • Project Management Fundamentals: Excellent organizational skills combined with a proven ability to manage time effectively, prioritize tasks, and meet project deadlines., • Professional Communication: Excellent written and verbal communication skills necessary to articulate technical issues, coordinate with team members, and interface with clients or review agencies., • Teamwork: The ability to work productively and independently, while also contributing effectively as a collaborative member of a project team., • Bachelor’s Degree in Civil Engineering is required, • Professional Engineer License (PE) for the State of Wisconsin is preferred, or actively working toward taking the PE exam., • This position requires sitting at a desk and working at a computer for long period of time, • Some work may include field work, • Hi-Visibility clothing should be worn on job sites and in the field as necessary Equal Employment Opportunity/Affirmative Action Employer

Job Description A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. • Review available training documentation and effectively apply it to daily activities., • Communicate clearly, confidently, and professionally with Clients / Engineers of Record / GC's / Subs / Vendors., • Learn the Cx process to effectively implement in the field., • Develop Cx procedures with use of a template., • Become familiar with testing durations to assist PM with Cx Schedule development., • Learn how to develop load bank plans to effectively test mechanical systems during integrated testing., • Assist in the development of TAB Verification plan., • Conduct TAB Verification as directed., • Deploy data loggers in the proper areas for required data collection with direction., • Execute functional testing with support of team members., • Fill in a daily onsite testing log., • Perform infrared (IR) scanning/analysis and record data in spreadsheet., • Mark IR photos for mechanical equipment., • Work experience: None required., • Education: 4-year college degree or equivalent field experience, • Training: None required, • General understanding of all mechanical and electrical building systems, • Military experience a plus, • Computer Skills: Microsoft Office programs, • Math Skills: Must be able to calculate figures and amounts (percentages and proportions), • Communication: Understands instructions and can convey information to others in a simple and unambiguous way, • Organizational skills, • Leadership abilities, • Initiative, • Ability to take direction, • Organization, • Responsiveness, • Decision-Making, • Data Entry Skills, • Data Processing Skills, • Dependability, • Reporting Skills, • Deadline Oriented, • Problem-Solving and Critical Thinking, • Planning and Organizing, • Communication Skills, • Meme Generation, • Integrity, • Teamwork, • Negotiation, • Adaptability, • Must have a dedicated home office that is conducive to daily responsibilities., • Must be able to move about the work area and travel to worksites as needed or required., • Travel rotation is typically 3 weeks onsite, 1 week work from home. If you are local to a job site, you will be expected to work onsite. This is all subject to change based on client and business needs, • Must be able to communicate with a variety of individuals; must be able to follow verbal and written instructions/directions and respond to inquiries., • Must be able to frequently perform strenuous physical activity including but not limited to: stand for eight or more hours at a time, move in rugged or unstable conditions, work in adverse weather, handle or feel objects, tools or controls which may not be visible, reach overhead. Occasionally may be required to climb ladders, stoop, kneel, crouch or crawl., • Must be able to carry test equipment up to 30 pounds. #IND1

Job DescriptionCompany Description TOMRA Food designs and manufactures sensor-based sorting machines and integrated post-harvest solutions for the food industry, using the world's most advanced grading, sorting, peeling and analytical technology. The company's mission is to enable its customers to improve returns, gain operational efficiencies, and ensure a safe food supply via smart, useable technologies. TOMRA Food is a member of the TOMRA Group founded in 1972 that began with the design, manufacture, and sale of reverse vending machines (RVMs) for automated collection of used beverage containers. Today TOMRA provides technology-led solutions that enable the circular economy with advanced collection and sorting systems that optimize resource recovery and minimize waste in the food, recycling, and mining industries. This role is within the TOMRA Food division. At TOMRA, we want people to innovate, exhibit passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We thrive off passion that always focuses and commits to meeting success. We demand a responsible and safe mindset that takes care of our customers, products and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications, • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated hourly base pay range for this position is $26.00 to $35.00 per hour. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description High School STEM Teacher Location: Aug Prep North Campus Schedule: Full-time during 10-month school year. Reports To: High School Principal Desired Start Date: July 2026 More Than a Job, A Mission Aug Prep is more than a school, it's a community where excellence, faith, and holistic education come together. We’re not only about high standards but also creating a place where people love to grow, learn, and inspire! We currently serve over 2,400 K4-12 students in our ninth year at our South Campus. We are thrilled to launch our North Campus in the 26-27 school year, initially serving about 300 students in grades K4-6 and 9. Why You’ll Love Working Here • Living Faith: Jesus is at the center of all we do. Join a team where you can pray together, worship together, and anchor your work in hope., • Award-Winning Workplace: Recognized as a “Best Place to Work” by the Milwaukee Business Journal six times in a row, standing out as the only school on the list in most years!, • High Expectations that Open Doors: We foster a dynamic culture of growth and development for students and staff alike. Our students regularly surpass expectations on state assessments and our graduates have a 100% college acceptance rate and a cumulative $85million+ in scholarships!, • Outstanding Resources: From a “classroom supplies” fund to top-notch curriculum to field trips to advanced technology, we shower our team with the tools they need to succeed. Our state-of-the-art facilities include advanced sports complexes, performing arts centers, top-notch classrooms and two swimming pools., • Whole-Child Approach: From arts to athletics to character education, we nurture students’ minds, bodies, and souls., • Joy Factor: This work is hard, but we work hard to bring JOY in all we do! Things like silly staff competitions, praise and worship sessions, team social events or learning a new skill like pickleball or gardening during a professional development day, we ensure our staff finds JOY with one another too!, • Benefits: Aug Prep offers a robust benefits package including medical/dental/vision,a 401(k) with employer match and employer-sponsored disability coverage. Full-time employees each receive $2500/year for college courses or professional development. For a more complete list of our benefits, please click HERE. In This Role, You Will be an exceptional collaborator and team player, passionate about teaching simple machines, circuits, coding, and biomedical measurements and analysis. You will have a deep understanding of STEM (Science, Technology, Engineering, and Mathematics) content areas and the ability to connect with and inspire students through hands-on, inquiry-based learning. We are particularly interested in educators passionate about working in a diverse education setting as a part of a high-performing, driven staff. Ideal candidates will also be well versed in strategies to promote metacognitive engagement and be willing to go the extra mile for students. Candidates should be organized, detail oriented, and show expertise in developing lesson plans. Academics • Deliver rigorous, engaging instruction and ensure every learner meets or exceeds academic goals., • Grounded in a deep belief in the potential of every student, implement instructional strategies to provide individualized and small group instruction by adapting the 9-12 curriculum to meet the needs of each pupil., • Use academic data to modify both whole and small-group instruction in order to best meet the needs of their students., • Plan and Deliver Instruction: Develop and implement rigorous, standards-aligned, and engaging project-based lesson plans that integrate multiple STEM disciplines., • Teach STEM Courses: Instruct students across a variety of high school STEM subjects (e.g., Physics, Chemistry, Biology, Computer Science, Robotics, Engineering Design), based on departmental needs and your area of expertise., • Design and execute hands-on laboratory experiments and engineering design challenges, adhering to safety protocols., • Differentiate Learning: Adapt instruction, materials, and assignments to meet the varied learning needs, abilities, and interests of all students, including those with IEPs or ELL status., • Facilitate Laboratory Work: Develop, set up, and supervise hands-on laboratory experiments and demonstrations, ensuring students learn proper scientific procedure and strict safety protocols., • Evaluate Work: Assess and evaluate student writing, reading comprehension, and oral presentations using clear rubrics and providing detailed, constructive feedback., • Maintain Records: Accurately record and report student attendance, grades, and progress in compliance with school and district policies., • Manage and maintain STEM lab equipment, materials, and technology, ensuring a safe and organized workspace., • Establish and enforce clear classroom expectations and school policies., • Stay current with best practices in STEM education, curriculum development, and educational technology through ongoing professional learning., • Sponsor or participate in STEM-related extracurricular activities, such as Science Olympiad, Robotics Club, or coding competitions., • Promote STEM Inquiry: Foster a culture of curiosity and a lifelong appreciation for science, technology, engineering, and mathematics through exploration, experimentation, and problem-solving., • Prepare for Exams: Prepare students for standardized tests and college-level exams, such as the SAT, ACT, or Advanced Placement (AP) exams where applicable., • Build trusting relationships with students so each child feels known, seen and loved., • Serve as the cultural and spiritual model for their students, always interacting respectfully and striving to demonstrate God’s love to their students and families., • Communicate proactively and consistently with students, families, and colleagues, providing frequent updates on student progress, classroom activities, and school initiatives., • Work collaboratively and supportively with colleagues, supervisors, students, parents/guardians, and community members, maintaining positive, solution-oriented relationships that foster a strong, inclusive environment for optimal learning., • Continuously seek professional growth through building and department meetings/professional development, formal coursework, workshops, and seminars/in-services., • Serve with a flexible, open heart that recognizes no duty is outside the scope of your role--we are a team that is stronger together in service of our students. The first few years of our school you may be asked to serve outside of your roll or area. We are looking for someone who is ready to roll up their sleeves and help in any way needed. What We’re Looking For • A belief in the ability of every child and a commitment to ensure excellence for each student., • A bachelor’s degree is required in a relevant STEM field (e.g., Education, Mathematics, Engineering, Physics, Computer Science), along with any additional accreditation requirements. A master’s degree is preferred, and a state teaching license is not required., • Active participation in a Christian church., • Effective oral and written communication skills, • Team player committed to the St. Augustine Preparatory mission and model., • Experience: Proven experience in teaching or student teaching high school STEM classes; experience teaching AP, Honors, or other advanced STEM courses is a plus., • Knowledge/Skills:, • Expertise in scientific concepts, principles, and problem-solving techniques., • Demonstrated knowledge of current educational technology and its application in the classroom (e.g., learning management systems, data acquisition tools, coding platforms)., • Proficiency in utilizing project-based learning (PBL) and inquiry-based learning methodologies. Non-Discriminatory Policy St. Augustine Preparatory Academy is an equal opportunity employer and does not discriminate on the basis of age, race, color, sex, national and ethnic origin or any other basis prohibited by law when hiring, promoting, establishing wages, or providing benefits. As a faith-based institution based on biblical principles, St. Augustine Preparatory Academy hires employees who agree with the school's Mission Statement and Statement of Beliefs and adhere to biblical standards of conduct. Powered by JazzHR 5icSjR4oB9

Job DescriptionOverview We are partnering with a long-established electrical and mechanical contractor with more than a century of experience supporting commercial and residential construction projects across multiple U.S. regions. The organization is known for its stability, strong internal processes, and collaborative project teams. This role provides critical administrative and coordination support to the mechanical contracting team, working closely with Project Managers to ensure projects are organized, documented, and executed efficiently from setup through closeout. The Role The Project Coordinator / Administrative Support professional is responsible for supporting the mechanical project management team with documentation, scheduling, reporting, and general administrative functions. Success in this role means being highly detail-oriented, organized, and comfortable managing multiple priorities in a fast-paced construction environment. Responsibilities • Provide administrative support to Project Managers across active mechanical construction projects, • Assist with project documentation including letters, purchase orders, subcontracts, bids, proposals, transmittals, and permits, • Support project setup by assigning job numbers and coordinating submittal and O&M documentation requirements, • Prepare and maintain submittal schedules to initiate the submittal process, • Verify and approve vendor invoices for Project Manager review, • Review weekly employee timecards for accuracy, • Compose, edit, and format correspondence, reports, and internal documents, • Generate and distribute open subcontract and purchase order reports, • Assist in maintaining up-to-date project drawings and documentation, • Coordinate procurement and return of bid plans as directed, • Support scheduling, meeting coordination, and meeting minutes Required Qualifications • Associate or Bachelor’s degree preferred in Business, Accounting, or Construction Management, • Strong written and verbal communication skills, • High attention to detail with strong organizational and problem-solving abilities, • Proficiency in Microsoft Excel and Word with strong word-processing accuracy, • Prior experience in construction, mechanical contracting, or project administration, • Familiarity with construction documentation and mechanical terminology, • Office-based role with daily computer use, • Regular sitting, typing, and document handling, • Occasional bending, twisting, and light lifting, • Competitive compensation based on experience, • Comprehensive benefits package including:, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid Time Off (PTO), • Paid holidays, • Life insurance, • Short- and long-term disability coverage, • Stable, well-established construction organization, • Strong exposure to mechanical construction project operations, • Collaborative team environment with clear processes, • Opportunity to build a long-term career in construction administration, • Consistent workload with structured project support responsibilities

Job Description Join the winning team, with the brand recognition of a Fortune 300 company that has been in business over 100 Years! Mutual of Omaha Mortgage is inspired by hometown values and committed to being responsible and caring for each other, we exist for the benefit of our customers. With this excellent reputation, you will find your customers more receptive because of our well branded name. We specialize in affinity relationships, where very competitive pricing is offered! Mutual of Omaha Mortgage is a full-service lending division offering a complete line of residential mortgage, refinancing, and specialty loans. We employ a knowledgeable staff of experienced Loan Officers with an operations team that is second to none. By constantly updating our loan programs and pricing based on market patterns, Mutual of Omaha Mortgage ensures that we deliver extremely competitive interest rates combined with optimal mortgage structuring. Website: The Work: At Mutual of Omaha Mortgage, Loan Officers are trained to listen, build rapport, understand and analyze the full financial situations of our customers. Our goal is to provide the most appropriate financial solutions to meet each client's specific needs. The Person: • Is energetic and outgoing, with excellent communication skills and who's able to be persuasive, has good character and integrity, • Connects quickly with consumers and builds rapport with potential clients, • Exceptional written and verbal communication skills, including excellent follow up capabilities, • Comfortable taking inbound calls, • Strong ability and passion for closing deals and negotiating, • Possess the ability to quickly identify customer's goals and objectives, • Is an ambitious professional who is motivated by the opportunity for advancement, • Flexible and adaptable, learns and reacts quickly in a fast paced environment, able to multi-task, • Strong sense of urgency and initiative to get things done, • Ability to handle high volume of phone calls, • Basic computer skills and data entry, • Sales experience preferred, • College degree preferred, but not mandatoryThe Perks:, • One of the best consumer direct compensation plans in the market, • Unstoppable marketing machine with LIVE TRANSFERS- NO COLD CALLING, • Ongoing sales training, teaching the most innovative sale methods and daily sales coaching, • Proud sponsor of our veterans and numerous military charities – We proudly serve our Veterans. We will donate $125 to veteran and active duty charities for every participating loan that we close, • Incentive plans, competitions, company paid trips and contests, • Continuous on-going training and internal growth, • Extensive product line – products other lenders don't have, • Being a part of a dynamic and collaborative corporate culture that drives you to succeed, • This position is eligible for commissions, along with state/local minimum wage base hourly, • Average Income of a Senior Loan Officer is typically between $50,000 and $200,000 a year, • Paid Sick Time — 40 hours of paid sick time after 90 days of employment. State sick time requirements will be added as needed., • 9 Paid Holidays + 1 Cultural Celebration Day (Floating Holiday), • Multiple PPO Medical Plans, as well as HDHP eligible plan., • Dental Coverage, • Vision Coverage, • Company Paid Life Insurance, • Additional Benefits including – Optional Life, FSA, Pet Insurance etc., • 401K with a generous employer match, • Free Legal Services MT4L9USTrF

Job Description Byrider - 4810 S. 27th St. - Milwaukee, WI 53221 Collections Account Manager (Consumer Finance) Do you have a background in management, sales, customer retention, call center, collections, or a related field? Would you enjoy earning great pay while helping customers with an industry-leading credit program? Growing national automotive consumer finance company! Collections Account Manager career opportunity! Rewards for Collections Account Manager: • Annual compensation: $50,000.00 - $70,000.00, • Top hourly rate based on experience + monthly bonus up to $2,000.00, • Great benefits & paid time off, • Career growth to Manager or Specialist, • Industry-best customer program, • 36 years in business, • Collections, customer service, customer retention, • Assist with lending/credit origination, • Help ensure branch compliance, • Demonstrate a high level of customer service, • Work with consumer finance software, • Full-time (40 hours), • 100% onsite, • No Sundays, • Work most Saturdays (shorter day) with a weekday off, • Location hours: Monday - Friday 9-7, Sat 9-4, • Shifts will vary, • 2+ years of collections, customer retention, management, call center, team leader/senior customer service rep, sales, or related experience, • Good communication, computer & customer service skills, • Able to work the hours listed & 100% onsite

Job Description WHO WE ARE We are a company where people matter. We are family driven. We are financially strong. And we are looking for problem-solvers to join our growing team. BENEFITS • Up to 10% Retirement Contribution, • $600 per Year Wellness Incentive, • Two Weeks Starting Paid Time Off INDUSTRIAL ACCOUNT MANAGER This role is a high-impact, growth-focused sales position responsible for owning and expanding a portfolio of strategic accounts within the industrial chemicals market, including commodity chemicals and customized, manufactured solutions. The successful candidate will operate as a true business owner—driving revenue, margin expansion, and long-term customer partnerships through strategic prospecting, consultative selling, and disciplined execution of a business plan aligned with annual performance goals. Primary responsibilities include: • Own and grow a defined account portfolio across industrial chemical customers, serving as the primary driver of revenue growth, customer retention, and margin expansion, • Prospect, qualify, and close new business opportunities across both commodity chemical offerings and engineered/manufactured solutions, • Partner closely with the Sales Manager to strategically price and maximize margins on new and existing projects, balancing volume-driven commodity business with higher-value solution selling, • Develop deep, trusted relationships with key decision-makers and influencers within target industrial accounts, • Collaborate cross-functionally with internal teams (operations, technical, supply chain, and customer service) to ensure seamless execution, timely delivery, and successful commercialization of new chemical solutions, • Leverage Salesforce and Business Intelligence tools to actively manage pipeline health, forecast accurately, and drive disciplined sales execution, • Maintain a dynamic sales funnel including target accounts, qualified prospects, and solution-based opportunities, • Translate customer processes, technical needs, and market dynamics into actionable growth strategies and account-level business plans, presenting insights and recommendations to senior leadership, • Consistently achieve or exceed goals for business retention, volume growth, margin expansion, and new customer acquisition, • Identify and capitalize on market trends, supply/demand dynamics, and competitive opportunities within the industrial chemicals space, • Demonstrate strong drive, resilience, and accountability in moving opportunities from concept to close, particularly in complex or multi-stakeholder environments, • Deliver professional, persuasive presentations and communicate effectively across all organizational levels—internally and externally REPORTING STRUCTURE • This position reports to the Sales Director PREFERRED EXPERIENCE • 3+ Years of successful sales experience in the chemical industry, • Bachelor's Degree from an accredited college/university is required, • Must have a valid driver's license and have an acceptable motor vehicle driving record, • Must have the ability to pass all pre-employment testing including, but not limited to background, MVR, and drug screening, • Must possess computer skills and be proficient at Word, Excel, and PowerPoint and job specific software, • Must have communication and interpersonal skills, along with the ability to read, write, and speak English. PHYSICAL REQUIREMENTS • Ability to attend meetings., • Ability to sit, work at a computer terminal, and/or talk on the telephone up to 4 hours at a time., • Ability to travel to customers and stay overnight when necessary. JOB EXPECTATIONS: • Uphold Hydrite's Standard of Excellence through a continuous commitment to maintain quality facilities and provide quality products and services to internal and external customers., • Participate in RCRA, regulatory, health & safety and process training activities as required. Review changes/additions with your supervisor. Must be RCRA compliant., • Regular attendance is essential., • Perform all duties outlined in relevant SOPs and all other duties to be assigned., • Work with other staff members to maintain workload balances. Provide back-up support as necessary., • Support effective communication with all Hydrite departments where responsibilities overlap to ensure success of the branch team. ADDITIONAL BENEFITS Benefits and perks include 401k and profit sharing, medical/dental/vision/life insurance, paid time off, tuition reimbursement, adoption assistance, legal services insurance, scholarship awards for children of employees, summer picnic, community giving events, free family wellness coaching including nutritionist and fitness coach. WANT TO STAY CONNECTED? FIND US ON SOCIAL MEDIA • LinkedIn: linkedin.com/company/hydrite-chemical-co-, • Facebook: facebook.com/hydrite Privacy Notice for California Residents:

Job Description Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Cleaver-Brooks is looking for an Applications Engineer to join our team in Milwaukee, WI. The Applications Engineer is responsible for supporting our sales representatives on custom applications, providing specification reviews, and developing sales quotations and supporting product information that supplements our rep’s equipment proposals to our customers. This role not only supports our reps with securing orders, but is also intimately involved with our production facilities, research and development, technical services, and key personnel on maintaining and updating product data and information, including the development and maintenance of complex product configuration logic in a cloud-based configure-price-quote (CPQ) application which supports the quotation and ordering processes used by our sales representatives. Job Location: Milwaukee, WI Essential functions: • Develop and possess thorough and relevant product knowledge, • Be able to review and understand project contract drawings and specifications, • Conduct design calculations, • Support our sales representatives by providing sales quotations and other product information that supplement their proposals to our clients, • Gather cost data from our database, product engineering drawings and bill of materials, and previous projects to develop sales quotations, which are then provided to our sales representatives to meet job specifications and requests for proposals, • Support our internal Product Managers on a variety of projects and tasks to maintain and update our standard product data, literature and pricing associated with our rep-only online sales configurator (CPQ) tool., • Develop and maintain complex product configuration logic in a cloud-based configure-price-quote (CPQ) application which supports the quotation and ordering processes used by our sales representatives., • Effectively communicate with our external suppliers to obtain pricing, lead times, and other data on key components to support non-standard applications, • Consolidate data and information used to develop sales quotations and system solutions, • Select equipment and prepare technical proposals, • Navigate Sales and Manufacturing Database programs to find product drawings and bills of materials, • Position requires the constant and consistent exercise of intellect, judgment, and ability commensurate with professional positions in similar industries or situations, • Position requires the regular exercise of problem solving and policy procedure interpretation skills, • Ability to handle responsibilities with effective interpersonal skills and to effectively interface with others inside and outside the Company, • Must have strong communication skills and the ability to project manage tasks to complete requests within required deadlines, • Background in heat transfer or other technical industries is preferred, • Will have contact with customers, consulting engineers, and company representatives regarding a variety of Packaged Boiler products, • Ability to learn a programming language unique to the CPQ application., • Ability to work in a fast-paced environment, • Position may require extended periods of operating a personal computer as a normal part of job duties, • Applications engineering and quotation development experience, • Comprehensive understanding of Thermodynamics, Fluid Mechanics and Heat Transfer, • Computer competency including sound knowledge using Microsoft Office software, with background in Salesforce and oracle-based ERP systems a plus, • Ability to Read / Understand Multiple Programming Languages (e.g. C#, .Net Technologies, etc.) Education: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance Cleaver-Brooks is the market leader in providing fully integrated boiler and burner systems. We lead the boiler/burner industry due to our unmatched distribution network’s ability to deliver the knowledge, service, training, and support that are essential to long-term performance. Our customers will tell you that we are the only equipment provider that manufactures boilers, burners, controls, and a full array of ancillary and aftermarket products. They will also mention that our unique single-source capability means that we can deliver fully integrated boiler room solutions that reduce overall costs and optimize space. It is our focus on products that deliver the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. Cleaver-Brooks continues a 90+ year legacy of providing the customers we serve with extraordinary products designed to deliver unsurpassed performance through the power of commitment. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. By applying for this job and providing your mobile number, you consent to receive an initial text message from a Cleaver-Brooks Talent Team member. You will have the option to opt out upon receiving the message. Messages may include updates on your application, scheduling initial screenings or interviews, and similar communications. Standard message and data rates may apply, and message frequency may vary.

Job DescriptionBenefits: • 401(k) matching, • Company car, • Dental insurance, • Health insurance, • Paid time off, • Competitive Compensation, • Great Work Environment WeatherPro Exteriors is seeking a motivated and dedicated Assistant Sales Manager to support and mentor our Sales Team in delivering exceptional roofing experiences. In this role, you'll ensure we uphold our commitment to excellence and customer satisfaction. Were looking for a sales professional passionate about coaching, embracing challenges, and providing top-tier service. If you have strong character and a drive to succeed, we want to hear from you! We seek someone committed to embracing and promoting our core values: Love for people: Desire to help people by serving them with their hearts to the best of their ability. Authenticity: Conducting themselves with honesty and integrity. Willing to take responsibility for actions and deliver on commitments. Hungry: Driven by a fire inside to work hard, smart and with intent and purpose. Excellence: Delivering excellence by constant improvement in processes, efficiencies and training. The Role we are hiring for: The Assistant Sales Manager is responsible for sales management activities, including ride along training with team members; monitoring, evaluating and implementing sales strategies to increase sales volume and average tickets. The Assistant Sales Manager is responsible for the sales team members adherence to the company sales process and policies in pursuit of attaining company goals. The Assistant Sales Manager is an active member of the sales team, contributing ideas, strategies, and solutions to propel the company toward its short- and long-term goals. Essential Duties and Responsibilities: The essential functions include, but are not limited to the following: • Ensure that each sales team member fully understands and is properly trained on their job roles and responsibilities required to achieving the company plan., • Ensure that all sales team members represent the company professionally, are committed to the 100% satisfaction of the companys clients, as well as showing a positive team spirit in all dealings with other team members., • Conduct 1:1 meetings with sales team members each week., • Adhering to and teaching the company Core Values and Team Rules., • Perform ride along training with sales team members to measure growth and adherence to sale processes and policies and provide documentation to help sales team members continually grow and improve., • Holding sales team members accountable to fulfill the roles and responsibilities of their position while delivering on expected goals, with specific measurable key performance indicators (KPIs) based on tenure in role.The Skills you bring:, • 2+ years of Sales Management experience, • Valid drivers license and good driving record, • Able to pass a background check, • Ability to work more than 40+ hours per week, • Technical knowledge and/or experience with roofing solutions and/or construction, • Able to drive a full-size company truck, • Able to lift and carry 50 to 75 lbs., • Able to climb a ladder and access a roof and attic in varying weather conditions, • Outdoor Aptitude able to work and drive-in ever-changing weather conditions, • Able to respond to help calls/flexible scheduling, • Excellent oral, written, and interpersonal communication skills, • Be open to learning new skills and apply them quickly, • Computer skills including Microsoft Office Suite, prior CRM usage

Job DescriptionDescription: We offer no-cost supervision for those seeking their LCSW and needing to complete their 3,000 hours We are a dynamic team that provides Care Coordination services to members enrolled in the Comprehensive Community Services (CCS) program here in the greater Milwaukee area. JFS CCS provides rehabilitative and recovery services to individuals struggling with mental health or substance abuse issues within the context of their unique needs and abilities. The programs offered through CCS are designed to promote and support recovery by stabilizing and addressing an individual's critical mental health needs, including substance use problems; an individual's ability to self-manage their physical and social health; and an individual's ability to meet their basic needs, including housing, education, and employment skills. We offer: A generous time off package that includes: PTO package that gives you up to 160 hours in your first year 7- Paid Holidays 8- Paid Personal Days (Floating Holidays) A comprehensive insurance package that includes: Health Insurance, Vision Insurance. and Dental insurance Company-sponsored Life Insurance Voluntary Life Insurance, AD&D, STD and LTD Insurance Optional Section-125 HSA and FSA options 403b and 403b Roth retirement with company match Employee Assistance Program We are looking for someone with a Master’s degree or a 4-year Bachelor’s with a CSW a Human Services field (Social Welfare, Psychology, Social Work, etc.) AND have at least one-year of paid, formal (non-family care giving setting) experience providing case management services and working with with behavioral health, mental health and/or addiction issues. If you have the ability to work independently, stay organized, are detailed-oriented, able to meet deadlines (enter timely case notes, submit reports, etc.), and most importantly, conduct assessments of, monitor and support CCS consumers with a professional and caring methodology, we would like to meet you. Our Care Coordinators meet with individuals in their homes or out in the community to identify recovery goals, develop customized recovery plans focusing on individuals’ preferences in order to improve or maintain the members; quality of life, independence, health and overall wellness as it relates to their mental health or substance recovery. As a Care Coordinator, you and the consumer will work with the consumer and a dedicated team of providers to decide which programs and supports will assist the individual reaching their recovery goals. The Care Coordinator position is full-time, predominantly first shift position requiring a valid Wisconsin Driver’s License, access to a vehicle, personal motor vehicle insurance meeting the minimum requirements of the Agency, passing of a Department of Justice Background Check and Federal Sex Offender Registry Check, and verification of references. Requirements: General • Must have a valid driver’s license, access to reliable vehicle, and automobile insurance coverage throughout employment and successfully pass a MVR and insurability check., • Knowledge, understanding, and/or willingness to learn Jewish culture and traditions and those of the Agency population as necessary., • Accept other duties and responsibilities as assigned., • Candidates must successfully pass a criminal background check with the Wisconsin Department of Justice and a caregiver background check with the Wisconsin Department of Health Services, the Department of Children and Families and the Department Safety and Professional Services and a Fingerprint ID check for relevant programs., • Candidates must pass a Dru Sjodin National Sex Offender and Wisconsin Sex Offender Registry screening., • Vaccinations per program requirements (Flu, MMR, Varicella, TB Skin Test), • Masters degree preferred. A four-year Bachelors degree with CSW in a Human Services field (e.g. Social Welfare, Psychology, etc.) required;, • A minimum of one (1) year of Comprehensive Community Services (CCS) experience providing Case Management or related services is required., • Experience in behavioral health, mental health and/or addiction is preferred., • Experience in various case management systems (TCM, CSP, Wraparound Milwaukee, My Choice Family Care, etc.) is preferred, but not required., • Must have excellent interpersonal, organizational, critical thinking, problem solving, creative and independent thinking skills., • Must be able to work independently with minimal supervision., • Excellent verbal and written communication skills are required., • Excellent customer services skills are required., • Have the ability to make accurate assessments, interact effectively with consumers, agency staff, and other community professionals within a team concept., • Must be able to handle multiple tasks simultaneously and prioritize based on severity of need., • The ability to respect and maintain privacy and dignity of consumers and assure consumer confidentiality at all times is required., • Familiarity with Electronic Health Record (EHR) management systems is required., • Proficient in computer use, Microsoft Office applications

Job Description Steele Solutions, Inc. is the nation's leading designer and manufacturer of steel work platforms and mezzanines. We recently launched our automation division to solve one of the biggest challenges in material handling-controls that are too often rebuilt from scratch, full of delays, and unpredictable at startup. With this launch, we’re looking for a Solutions Engineer professionals to join our automation team in Atlanta, GA (preferred) or Milwaukee, WI! *Role does require travel up to 25-30% Summary The Controls Estimating Engineer is a lead concepting and estimating authority for complex automation and controls opportunities within the Controls Division. This role is responsible for developing technically sound, commercially competitive solutions while protecting margin and execution integrity. The Senior Solutions Engineer leads high-stakes pursuits, establishes and governs estimating and concepting standards, mentors and develops Solutions Engineering talent, and partners closely with Sales, Engineering, and Leadership to drive win strategy, proposal quality, and continuous improvement. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. • Lead concept development and estimation for large, complex, or high-risk automation and controls projects, including multi-zone, high-throughput, and multi-site systems., • Define and validate system architectures, control strategies, execution approaches, and key cost drivers., • Develop, calibrate, and govern labor models, productivity factors, and estimating assumptions using historical data., • Independently validate full estimates for accuracy, completeness, and internal consistency., • Identify risks, assumptions, exclusions, and mitigation strategies; recommend contingencies and alternates aligned to commercial strategy., • Proposal & Commercial Strategy, • Own solution and pricing strategy for assigned pursuits, including basis of estimate, alternates, and risk posture., • Lead internal bid reviews, gate approvals, and executive presentations; communicate technical and commercial tradeoffs clearly., • Partner with Sales/BD leadership on pipeline planning, bid/no-bid decisions, prioritization, and win strategy., • Produce customer-ready technical narratives, pricing packages, and executive summaries that align with contract language and margin objectives., • Standards, Governance & Continuous Improvement, • Establish and maintain concepting and estimating standards, templates, tools, and governance across Solutions Engineering., • Oversee historical cost databases, estimating KPIs, and model calibration to improve accuracy and quoting velocity., • Drive continuous improvement initiatives, including reusable proposal content, standardized modules, and automation of estimating processes., • Leadership & Talent Development, • Mentor, coach, and review work of Solutions Engineers across levels; ensure quality and consistency of outputs., • Support hiring, onboarding, training, and performance development as applicable., • Lead cross-functional alignment between Solutions Engineering, Project Management, Engineering, and Operations to improve handoff quality and reduce rework., • Customer & Executive Engagement, • Lead customer workshops and high-visibility pursuits; present solutions to technical, operational, and executive stakeholders., • Represent Solutions Engineering in executive-level reviews and strategic discussions., • Negotiate scope boundaries, assumptions, and clarifications with customers and internal stakeholders with minimal oversight. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • Bachelor’s degree preferred (Mechanical, Electrical, Controls/Computer, Systems Engineering, or related)., • 7–10+ years of experience in material handling, automation systems, solutions engineering, pre-sales system design, or estimating., • Demonstrated experience leading complex pursuits and influencing commercial outcomes., • Key Skills & Competencies, • Strong technical judgment and ability to evaluate complex tradeoffs under uncertainty., • Advanced estimating, modeling, and analytical capabilities., • Comfortable presenting to senior leadership and C-level customer stakeholders., • Metrics-driven, process-oriented mindset with a bias toward scalable, repeatable solutions., • Strong leadership, coaching, and cross-functional influence skills., • High ownership mindset with disciplined decision-making and strong risk awareness. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions Office-based with periodic exposure to plant and customer sites. Locations: Atlanta, GA / Milwaukee, WI Travel: Occasional customer or site workshops (<25–30%) Why You’ll Love Working Here? • A collaborative culture., • Opportunities to make a real impact as we grow., • Competitive pay, great benefits, and a great team.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Employee discounts, • Flexible schedule, • Opportunity for advancement, • Signing bonus Leverage your tax expertise, business background, and knowledge of tax laws to propel you to the next level. You will provide exceptional client service while connecting with clients in a fun, fast-paced environment. Don't miss out on this opportunity to make a difference for the hardest working! $150 Sign-On Bonus for new employees! Terms apply What you need: • 2+ seasons of previous experience completing individual, trust, and/or partnership tax returns, • Passion for providing extraordinary customer service, • Excellent communication and interpersonal skills, • Ability to thrive in a fast-paced work environment, • Basic computer skills, • Willingness to learn, • Experience in accounting, finance, retail, bookkeeping, or taxesAdditional Perks:, • Full-time and part-time positions are available, • Flexible Schedule Options Work that works for you!, • Work Lotto (Win money for logged shifts), • Low-cost benefits (healthcare, dental & vision), • Teladoc (Unlimited Teladoc sessions for you and your whole household for $18 per month), • Free identity theft protection, • Corporate discount program, • Free tax preparation training and PTIN registration reimbursement, • Referral bonus opportunities are available for referring qualified candidates, • Free continuing tax education, • Enrolled Agent materials and testing reimbursement, • Opportunities for advancement within the organization, • Employee referral program & sign-on bonus for new Tax Preparers (terms apply), • Medical & Prescription benefit option (eligible to participate after working 1,560 hours annually), • 401k with Company Match (eligible to participate after working the first 1,000 hours) If you're looking for a rewarding opportunity to learn new skills and make an impact, apply today! The Companys Privacy Policy is located at: . By submitting an application, I (1) affirm and agree with my decision with regard to California public records, as set forth in the Note to Applicant, and with regard to the California collection of personal information, as set forth in the "Privacy Notice to California Job Applicants" (if applicable); (2) acknowledge I have read the Note to Applicants.

Job DescriptionDescription: Shift: M-F 7 AM - 3 PM, Flexibility for Weekend Community Medical Services (CMS) is hiring a Peer Support Program Manager to oversee the development and implementation of the Peer Support Program and oversee delivery of Peer Support services. Manages, maintains, and coordinates Peer Support Specialists within current clinic infrastructure and within assigned grants. This position will develop the programs for Peer Support in different regions, utilizing the lived experience of Opioid Use Disorder, and assisting to navigate clients through their MAT experience and with other systems. As part of our mission to help individuals recover from substance use disorders, you’ll thrive in a supportive, engaging, and fulfilling work environment where your contributions are valued. Along the way, we’ll invest in your well-being through a benefits package that includes: • Subsidized medical, dental, and vision insurance, • Health savings account, • Short and long-term disability insurance, • Life insurance, • Paid sick, vacation, and holiday time, • 401K retirement plan with match, • Tuition and CME reimbursement up to 100%, • Employee assistance program to support your mental health and wellness, • Provides individualized, ongoing guidance, coaching and support to Peer Support team, both individually and in group supervision, • Focuses on supervision, performance management, and process improvement for Peer Support Program., • Promotes understanding of Peer Support models and delivery internally and to external agencies., • Trains staff and ensures the Peer Support team observes all rules of confidentiality relating to clinical information and treatment, both internally and when dealing with external agencies and/or individuals., • Works to support and ensure deliverables for grants that relate to Peer Support services are submitted within appropriate timeframes., • Develops policies, procedures, and infrastructure for Peer Support Program., • Maintains professional standards at all times. Observes the guidelines established within the Code of Ethics and conducts self professionally and maintains confidentiality of clients at all times., • Identifies initial and ongoing training needs for Peer Support program and ensures compliance within training program., • Oversees CMS Peer Support Specialists interfacing with correctional health facilities, hospitals, community-based outpatient settings, community-based inpatient settings, and community agencies for continued support in the form of case management, community-based services, and coordination for all supporting CMS facilities for the identified clients., • Develops transportation protocol for Peer Support delivery., • Assists in planning and implementation of groups at existing CMS clinics., • Utilizes outcome measurement tools to monitor effectiveness of program and implement changes as needed., • Implements Evidence-based practices within Peer Support Program., • Interfaces with clinic managers, clinical team, correctional health team, and systems partners to focus on ways to engage and retain clients in MAT through the use of Peer Support., • Works with Peer Support team to ensure accurate and appropriate record keeping and providing information for monitoring and evaluation as required.Requirements:, • High School diploma or equivalent, • Certification in recognized Peer Support Training, • Experience in MAT preferred, • Supervisory experience preferred, • Minimum 2 years in recovery, • Basic computer knowledge is necessary, • Knowledge of the recovery process and the ability to facilitate recovery using established standardized mental health processes., • Knowledge and skill to teach and engage in basic problem-solving strategies to support individual clients in recovery., • Knowledge of the signs and symptoms of substance abuse (I.e. auditory and visual hallucinations, irregular talk and behavior, motor skill impairment) and the ability to assist the client to address symptoms using strategies such as positive self-talk., • Knowledge and skill sufficient to use community resources necessary for independent living and ability to teach those skills to other individuals with substance abuse., • Valid driver's license is required as some driving and/or transportation may be required to take clients to community resources and additional service providers., • Uses good judgment and maintain effective boundaries when sharing information about company with staff, other providers, and members of the community., • Must be able to demonstrate sufficient knowledge and understanding of human behavior and sufficient knowledge of general mental health issues, treatment planning and the field of human social services to work towards the rehabilitation of the client, • Exceptional interpersonal skills in a team environment, • Strong communication skills, both verbal and written, • Strong organizational, multi-tasking, time management skills, • Culturally competent and sensitive to client and employee needs. Tools and Equipment Requirements: • The ability to use a phone, computer, printer, and copier is required., • Frequent use of Microsoft office products, including but not limited to Outlook, Word, Excel, and PowerPoint., • The ability to use the internet and various web browser software is required. Physical Working Conditions and Office Setting Description: • Requires sitting and standing associated with a normal office environment., • Manual dexterity using a calculator and computer keyboard., • Requires prolonged sitting, standing, frequent bending, stooping, or stretching., • Some lifting may be required., • Frequent and prolonged typing and frequent and prolonged operation of computer, keyboard, and telephones required., • Requires occasional use of fax machines, telephones, copiers, and other office equipment., • Employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. #MGMT About Community Medical Services Community Medical Services (CMS) is a CARF-accredited addiction treatment program providing services in the form of outpatient medication-assisted treatment and one-on-one and group counseling to those seeking help with their opioid use disorder. Headquartered in Arizona with more than 70 treatment clinics in 14 states, CMS is dedicated to meeting the challenges presented by the growing opioid epidemic in communities where treatment is lacking. Our Commitment We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, disability status, sexual orientation, gender identity, age, protected veteran status or any other characteristic protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Other Conditions Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Employee discounts, • Flexible schedule, • Opportunity for advancement, • Signing bonus If you join our team as a Seasonal Entry Level Tax Preparer, you'll conduct one-on-one tax interviews with clients, start to develop your book of business, and provide exceptional customer service. You will also have the opportunity to expand your skill set with professional development and continual training. No matter your work background or experience level, we welcome you to apply! $150 Sign-On Bonus for new employees! Terms apply What you need: • Passion for providing extraordinary customer service, • Excellent communication and interpersonal skills, • Ability to thrive in a fast-paced work environment, • Basic computer skills, • Willingness to learnAdditional Perks:, • Full-time and part-time positions are available, • Flexible Schedule Options Work that works for you!, • Work Lotto (Win money for logged shifts), • Low-cost benefits (healthcare, dental & vision), • Teladoc (Unlimited Teladoc sessions for you and your whole household for $18 per month), • Free identity theft protection, • Corporate discount program, • Referral bonus opportunities are available for referring qualified candidates, • Free continuing tax education, • Enrolled Agent materials and testing reimbursement, • Opportunities for advancement within the organization, • Employee referral program & sign-on bonus for new Tax Preparers (terms apply), • Medical & Prescription benefit option (eligible to participate after working 1,560 hours annually), • 401k with Company Match (eligible to participate after working the first 1,000 hours) If you're looking for a rewarding opportunity to learn new skills and make an impact, apply today!

Job DescriptionBROADBAND TECHNICIANDIRECT HIRE OPPORTUNITY COMPETITIVE PAYTRAINING AND ADDITONAL PERKS PROVIDED LOCATION: In customer sites in Madison, WI and surrounding areas DCOMM is hiring hands-on problem solvers who hate being stuck in an office. If you’ve ever installed a car stereo, built your own computer, or set up a satellite dish, you already know the kind of work we do. Our Broadband Technicians are the people who keep the internet, TV, and phone services running for homes and businesses — rain or shine. This isn’t a clean-desk job. You’ll be climbing ladders, running cable, solving problems, and getting the satisfaction of building something that actually works when you leave.Why You’ll Love It • Hands-on work every day — tools, tech, and troubleshooting., • Outdoors + indoors — no cubicles, no boredom., • Paid training + opportunities to grow your skills., • Company vehicle + gear provided., • Background in installs, assembly, or diagnostics (car stereos, computer builds, cable/satellite installs = huge plus)., • Comfortable working outdoors and at heights (ladders up to 28 ft)., • Valid driver’s license + clean record., • Willing to work in all weather, evenings/weekends as needed.The Perks, • Competitive pay + production incentives., • Paid training and room to move up., • Health benefits + PTO., • Company uniforms, tools, and smartphone. Culture COMMITMENT TO EQUAL OPPORTUNITYWe are an Equal Opportunity Employer. We are committed to fostering an inclusive and equitable workplace where diversity is celebrated. We do not discriminate based on race, color, religion, sex (including pregnancy-related conditions), sexual orientation, gender identity or expression, national origin, ancestry, age, disability, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Responsibilities What You’ll Do • Install and repair internet, TV, and phone services., • Run coax & fiber lines, set up equipment, test signals., • Troubleshoot and fix technical issues on the spot. Requisition #cmjsqqcqk013y0ipi0nz2ojjf

Job DescriptionCompany Description CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description CRB are currently looking for a Construction Engineer, otherwise known as a Field Construction Engineer or Project Engineer, to join our growing team. The Construction Engineer will be primarily located at a designated construction site and will be responsible for supporting the Project Manager and other project team members in executing activities to include; bidding support, executing the submittal and RFI review process, document control, verification of as-builts, supporting quality control, supporting site safety, executing equipment receiving process, managing closeout documentation, and supporting cost management activities. Candidates must be willing to travel extensively. Responsibilities • Support the construction of assigned project(s) and to ensure the work performed is in conformance with the project objectives and the requirements of the construction documents, • Bidding support and document control, • Execute the submittal and RFI review process, • Verification of as-builts, supporting quality control, supporting site safety, • Execute equipment receiving process, • Manage closeout documentation, • Support cost management activitiesQualifications, • Bachelor’s degree in Construction Management, Science, or Engineering, • Computer skills with Microsoft Office suite experience, • Capable of learning new computer programs for project management and reporting, • Experience with mobile devices and VDC apps a plus #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description At Wellpoint Care Network, our mission is to facilitate equity, learning, healing, and wellness by restoring the connections that help children and families thrive. Every person deserves the opportunity to reach their fullest potential. It’s part of human nature, and the promise of our country, that everyone be given a fair chance to be and do their best. Yet, many in our community live with unresolved childhood and generational trauma. That’s where we come in. We believe we can create a world where children and families have a clearer path to their fullest potential. Wellpoint Care Network has championed the restoration of families for nearly 175 years. Job Purpose: Our next Caregiver Support Specialist will provide out of home care providers of children in court-ordered care with a variety of services to enhance their ability to meet the children’s needs. The primary goals of the program are to increase placement stability and to help ensure that caregivers, who are an imperative part of the team, feel supported. Caregiver Support Specialists work one on one with caregivers in their home to provide education on many different topics including trauma informed care and parenting, resources and services for the children and caregivers, and overall support to caregivers as they navigate the child welfare system. Qualifications: • Master's degree in Social Work or related degree preferred., • Bachelor’s degree in Social Work or related degree required., • A minimum of 2 years of experience in service provision to child welfare kids/families with preference given for case management and licensing experience., • Crisis intervention experience., • Excellent communication skills., • Knowledge of community resources., • Advanced knowledge of Trauma Informed Care concepts with the ability to enhance caregiver’s skill set., • Proficient in the usage of computer software; demonstrate an understanding of computer file systems and computer software packages, e.g., Microsoft Office, Excel, Outlook, Teams, ADP, etc., • Must be honest, dependable, and able to meet deadlines; Self-motivated and able to work independently., • Physical exam, drug screen, motor vehicle report, and background checks are required for this position., • A valid Wisconsin Driver’s License or occupational driver’s license, reliable transportation and insurance is required. Duties: Clinical & Direct Support Services • Contributes to caregiver skill development and knowledge base (i.e., regarding child welfare system, mental health related issues, behavioral interventions, child developmental/emotional needs, etc.)., • Contributes to program outcome goals through interventions that support educational and placement stability., • Supports and educates the team in transition planning for children., • Appropriately advocates for families within the given system and empowers and supports caregivers to advocate for themselves., • Demonstrates the ability to work collaboratively and form positive relationships with treatment team members (Child, Birth Family, Caregiver Family, Purchaser, and Collateral Providers) towards meeting family needs. Assessment • Comprehensively assesses caregivers and child’s needs and utilizes assessment information to establish relevant, measurable, strengths-oriented goals that are trauma-informed., • Provides individualized and child specific recommendations/interventions for the child and caregiver., • Assesses all enrolled children to determine if child would benefit from additional assessments, such as a NMT, OT, Birth to Three, etc. Program Development & Documentation • Supports the development and implementation of programs and initiatives aimed at improving quality outcomes., • Uses data and feedback to continuously improve efforts and strategies., • Documents and prepares reports on activities, outcomes, and impact., • Produces quality, well-written and efficient case documentation (reports, progress notes, CoBRIS entries)., • Admission/intake and discharge reports are completed within the required timeframes. Teamwork • Regularly collaborates with child welfare and foster care colleagues to best meet the needs of the families., • Initiates collaboration between birth parents and caregivers., • Participates in Agency and program development activities to improve the quality of services and to maintain program/Agency growth. Agency Engagement • All employees will be evaluated on their demonstration of a consistent commitment to the Agency’s Seven Essential Ingredients, Inclusion & Belonging, and engagement in the strategic initiatives of the organization. This will be measured by their active participation in committees and workgroups, and by their communication and practice within their daily work and in the community. Position Details & Extras: • Hybrid & on-site work is available with reliable broadband connection., • Involved with students, personnel, family members, visitors, volunteers, interns, government agencies, etc., under all conditions and circumstances., • Moderate exposure to noise., • Ability to handle multiple tasks simultaneously., • Ability to work under demanding conditions., • Good memory and recall are necessary for the accurate and timely transfer of data/information., • Public Service Loan Forgiveness (PSLF) - Wellpoint employees may be eligible for loan forgiveness under the Public Service Loan Forgiveness program., • Regular travel in personal vehicles is required with the ability to move intermittently throughout the workday. Organizational Information: At Wellpoint Care Network, we have seen exactly how trauma, poverty, systemic racism, social injustices, and other barriers create instability in all areas of life. The people in our care face education and health disparities, high unemployment rates and unaffordable housing. What’s worse, many have lost connections to resources, family, friends, and other support systems. We have seen the toll it has on a person’s physical, emotional, and financial well-being to try and successfully navigate complex systems that may have failed them in the past. We believe there is a better way. So, we have anchored ourselves in our 170 years of caring for our neighbors through modernized human services. Wellpoint Care Network provides a rich continuum of services, including: • Child Welfare and Foster Care, • Support for youth who have aged out of care, • Care Coordination and Wraparound services, • Mental health therapy and supports such as our Clinic, Family Preservation, Caregiver Support, and Integrated Community Treatment, • Professional education and clinical consultation (for organizations, schools, and individual/family) Wellpoint Care also works to promote a diverse and caregiving environment to ensure that those we serve and employ are valued, accepted, respected, and treated equitably. • Equity means we work tirelessly toward fair and just treatment, systems, and policies. At Wellpoint Care Network, we believe that we are accountable – individually and collectively – when inequity or injustice replaces equity and inclusion., • Inclusivity means that we consciously build groups that welcome and celebrate differences in age, race, ethnicity, class, gender, sexual orientation, religion, gender expression, education, socio-economic background, personal history, geographical location, marital status, parental status, and work experiences. Interested parties please apply online. We are committed to enhancing diversity, equity and inclusion and strongly encourage minority candidates to apply. For more information, visit our website . Equal Opportunity Employer

Job Description Overview: Seeking a Quality Technician to support day-to-day inspection activities within a metals manufacturing environment. This role ensures parts meet engineering specifications, customer requirements, and internal quality standards. Responsibilities: • Perform mechanical inspections on raw materials, in-process parts, and finished components, • Use basic and advanced precision measurement tools including calipers, micrometers, height gauges, bore gauges, and indicators, • Interpret engineering drawings, tolerances, and specifications, • Document inspection results, nonconformances, and quality reports, • Support first article inspections, in-process checks, and final inspections, • Work closely with production and engineering to resolve quality issues, • Maintain calibration and proper care of all inspection tools and equipment, • Experience in metals or machining/manufacturing environment preferred, • Strong knowledge of mechanical inspection tools and measurement techniques, • Ability to read and interpret blueprints and GD&T, • Basic computer skills for data entry and reporting, • Strong attention to detail and accuracy, • Ability to work independently and within a team 1st shift: 6 AM - 2 PM

Job Description Salary: $100,000 - $105,000 Other Forms of Compensation: Pay Grade: [[payGrade_obj]] Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary CSP Educator position is accountable for coordinating education in Central Service (CS) department to include assessing, planning, implementing, and evaluating education and training of the Central Service staff. Key Responsibilities: • Extensive knowledge in analyzing and interpreting manufacturer’s IFU for surgical instrumentation, endoscopes, and medical equipment., • Ability to operate semi-automatic to automatic sterilizing equipment; mechanical decontamination equipment and other related equipment, e.g., ultra-sonic washers, rinsers/dryers according to manufacturer’s IFU., • Maintains established departmental policies, procedures, objectives, Quality Assurance program, safety, environmental, and infection control standards, • Reports defective or damaged materials, equipment and supplies to supervisor., • Coordinates the departmental orientation of new hires., • Plans, implements and promotes the education and training of staff members to ensure professional development., • Ensures that the department meets all the regulations, standards and guidelines consistent with AORN, AAMI, The Joint Commission, CMS, CDC, OSHA, and FDA requirements as well as the hospital’s policies and procedures., • Completes required continuous training and education, including computer-related requirements., • Manages and maintains employee compliance folders to ensure certifications, proficiencies, and related documentation are up to date., • Generates and prepares agenda for Meetings and documents the meeting’s minutes., • Follows all health and safety regulations and requirements., • Will audit quality and performance test documentation for all sterilizers, washers, and high-level disinfecting equipment., • Will use Tracking Software such as Ascendco, SPM, Censitrac, Abacus, T-Dot, etc. to generate various reports and audit compliance records to ensure accuracy., • Preferred Qualifications:, • Must have upon hiring : Certified Registered Central Service Technician (CRCST), • Must obtain within 180 days of hiring: Certified Instrument Specialist (CIS), • Must obtain within 180 days of hiring : Certified Healthcare Leader (CHL), • Must obtain within 180 days of hiring if GI is managed by SPD: Certified Endoscope Reprocessor (CER), • Minimum Knowledge and Education:, • Highschool Diploma/GED required, • Associates Degree in Healthcare or Business related field required College level courses and related experience may substitute for Associate Degree., • Minimum two years experience in Sterile Processing Department required., • Three years experience working directly with OR instrumentation and case cart program preferred., • Minimum two years experience in management preferred Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1499579 Crothall Healthcare JANELLE C. ALLEN [[req_classification]]

Job Description Licensed Insurance Account Manager - State Farm experience required Location: MILWAUKEE, WI, 53211 Salary: $42000.0 - $60000.0/year Experience: 3 Year(s) Successful State Farm Agent is seeking a qualified professional to join their winning team for the role of a Licensed Insurance Professional. We seek a licensed energetic professional interested in helping our business grow through value-based conversations and remarkable customer experience. This role requires exceptional relationship building, organizational skills, attention to detail, and the ability to handle sensitive and confidential information with utmost discretion. The best candidate understands the State Farm Agency model and has market area operations acumen. This position is only available to candidates who meet the following criteria: • Must have recent prior State Farm experience, • Establish customer relationships and follow up with customers, as needed., • Provide prompt, accurate, and friendly customer service., • Use a customer-focused, needs-based review process to educate customers about insurance options., • Maintain a strong work ethic with a total commitment to success each and every day., • Base Salary plus Bonus and Commission, • Paid Time Off (personal/sick days and vacation), • Valuable experience, • Prior State Farm or other related insurance experience (required), • Property & Casualty license (required), • Life and Health license (required), • Excellent interpersonal skills, • Excellent communication skills - written, verbal and listening, • People-oriented, • Organizational skills, • Self-motivated, • Detail oriented, • Proactive in problem solving, • Dedicated to customer service, • Able to learn computer functions, • Pride in getting work done accurately and timely, • Ability to work in a team environment, • Ability to multi-task, • Provide timely and thorough activity reports to agent This position is with a State Farm independent contractor agent, not with State Farm Insurance Companies. Employees of State Farm agents must be able to successfully complete any applicable licensing requirements and training programs. State Farm agents are independent contractors who hire their own employees. State Farm agents' employees are not employees of State Farm. PI72ba76b8d78d-25405-38528453

Job DescriptionTool & Die Designer - Metal Stamping Full-Time | On-site Industry: Precision Metal Stamping / Manufacturing Location: Confidential - Greater Milwaukee area Overview We at LHH Recruitment Solutions are proud to partner with a growing manufacturer to identify a Tool & Die Designer with hands-on experience designing progressive stamping dies, tooling, gauges, and assembly equipment. This role is ideal for a designer who understands manufacturability, cost drivers, and real-world shop-floor execution-not just CAD design. Key Responsibilities • Develop end-strip layouts for quoting, estimating, and internal team review, • Collaborate with manufacturing and tooling teams to design efficient metal forming processes, • Optimize die performance using forming analysis software, • Identify design efficiencies that reduce tooling cost and improve performancePrincipal Duties, • Design stamping dies, tooling, fixtures, and gauges for efficient production, • Create and refine end-strip layouts to support quoting and die design, • Lead and participate in design reviews to communicate risks, concerns, and solutions, • Participate in Pre-Build Meetings to support process optimization, • Support toolmakers with machining and assembly of complex die components, • Quote purchased components required for complete tooling designsQualifications Education & Experience • High school diploma or equivalent required, • Tool & Die Maker Journeyman card required, • Minimum 2+ years of die design experience in a metal stamping environmentSkills & Abilities, • Strong technical math skills, • Proficiency with computer-based design tools, • Ability to read and interpret technical drawings and specifications, • Strong communication skills for collaboration across engineering, tooling, and productionWhy Consider This Opportunity?, • Hands-on die design role with direct impact on tooling performance and cost, • Opportunity to collaborate closely with experienced toolmakers and manufacturing teams, • Stable, production-focused environment with long-term demandBenefits & Additional Information Benefit offerings include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. Pay Details: $42.00 to $48.00 per hour Search managed by: Melissa Braaten-Krueger Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Job Profile: - Radiologic Tech I • Performs basic and intermediate radiologic procedures under the direction of the Radiologist., • May perform advanced procedures if experienced and need arises. Job Profile Summary Job Description Major Responsibilities:, • Competently performs basic and intermediate radiographic procedures including general diagnostic and general fluoroscopic., • Communicates with patients to explain procedures, obtain clinical history, confirm acknowledgment of patients' understanding and address any questions or concerns. Positions patients and selects exposure factors for various radiologic examinations, and provides patient with radiation protection and safety in accordance with prescribed methods., • Identifies patient and labels images pertaining to the patient, compares requisitions to physician's orders to ensure exam accuracy, and processes images ensuring quality of radiographs and calls back patients as necessary., • Assists, communicates and consults with the Radiologists., • Prepares and maintains records in accordance with various regulatory agencies and enters patient and study information into the radiology information system, and documents billing codes of procedures performed to ensure accurate patient charges., • Performs various patient positioning and transporting duties, which require lifting and pushing/pulling, while utilizing proper technique., • Must be able to demonstrate knowledge and skills necessary to provide care appropriate to the age of the patients served. Must demonstrate knowledge of the principles of growth and development over the life span and possess the ability to assess data reflective of the patient's status and interpret the appropriate information needed to identify each patient's requirements relative to his/her age-specific needs, and to provide the care needed as described in the department's policies and procedures. Age-specific information is developed further in the departmental job standards. Licensure, Registration, and/or Certification Required:, • Radiographer license issued by the state of Wisconsin., • Registered Technologist (RT) registration issued by the American Registry of Radiologic Technologists (ARRT), and, • Basic Life Support (BLS) for Healthcare Providers certification issued by the American Heart Association (AHA) needs to be obtained within 6 months., • Education Required:, • Advanced training beyond High School that includes the completion of an accredited or approved program in Radiologic Technology. Knowledge, Skills & Abilities Required:, • Competent in radiology positioning and techniques., • Knowledge of basic radiation safety and radiology equipment., • Excellent communication, interpersonal and patient service skills to work effectively with physicians, patients and other staff members., • Ability to work independently., • Intermediate computer skills. Physical Requirements and Working Conditions :, • Must be able to sit, stand, walk, lift, squat, bend, twist, and reach above shoulders frequently, • throughout the workday., • Must be able to stand/walk for majority of the day., • Must be able to:, • lift up to 50 lbs. from floor to waist., • lift up to 20 lbs. over the head., • carry up to 40 lbs. a reasonable distance. Must be able to, • push/pull with 30 lbs. of force., • perform a sliding transfer of 150 lbs. with a second person present., • May be exposed to mechanical, electrical, chemical, and radiation hazards as well as blood, • and body fluids; therefore, personal protective equipment must be worn as necessary., • Must have clear speech, vision, and hearing., • Operates all equipment necessary to perform the job., • This job description indicates the general nature and level of work expected of the incumbent. It is not, • designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. Incumbent may be required to perform other related duties. #TB_HC #ZRHCCompany DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

John M. Ellsworth Co., Inc. (JME), headquartered in Milwaukee, Wisconsin, is a leading distributor of premium fluid management products. Since 1974, JME has served industries such as petroleum, chemical, agricultural, oil & gas, sanitary, food & beverage, and fire. Renowned for its unmatched product selection, JME delivers trusted, high-quality equipment, expert customer service, and fast delivery to ensure top customer satisfaction. With 50 years of industry expertise, JME remains an innovative market leader by continually adapting to customer and supplier trends. Our knowledgeable team takes pride in assisting customers in finding reliable solutions tailored to their unique needs. The Inside Sales Representative will focus on new customer acquisitions, and work with each individual customer to create customized solutions for their needs. Each day, you’ll have a pipeline of perspective clients who are looking for JME’s industry expertise, NO COLD CALLING required! This position also offered unlimited commission earnings! Essential Requirements: • Understand client needs and provide solutions and support, • Answer client questions and follow-up questions, • Work with sales team to help close sale opportunities, • Track weekly, monthly, and quarterly performance and sales metrics, • Maintain a database of prospective client information using Salesforce, CRM, Excel, etc., • Work with clients through the entire sales process from quoting to closing process, • High school degree or equivalent, • 1-year previous experience as an inside sales representative, or related sales experience, industrial sales preferred, • Strong computer skills, including Microsoft Office and CRM/Salesforce experience, • Excellent verbal and written communication skills; the ability to call, connect and interact with current and potential customers, • 401(k) planning/ company match, • Dental insurance, • Health insurance, • Vision insurance, • Paid time off Pay: $55,000 base, plus commission Schedule: 1 shift, Monday to Friday Work Location: In person, Milwaukee, WI 53224 (Required)

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Salary Range: $83,000+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job DescriptionOverview Company Overview: Join Allied Universal® Electronic Monitoring and build a rewarding career in cutting-edge security technology. We develop next-generation electronic monitoring solutions for law enforcement and government agencies. Beyond tech roles, we offer customer support, training, and technical assistance positions. Be part of a welcoming and collaborative team that values innovation and strives for excellence. At Allied Universal®, you'll have the opportunity to make a meaningful impact in the security industry while growing with a company that's committed to your success. Job Description Allied Universal® Electronic Monitoring, an Allied Universal® Company, is hiring a Regional Sales Manager. The Regional Sales Manager is responsible for researching, identifying, and pursing new sales opportunities within a specific assigned region. The Sales Manager will have a command of all products and services and the ability to effectively demonstrate this to prospective customers. The ultimate goal of the successful Sales Manager is to secure new business as demonstrated by producing fully executed contracts. Extensive travel (up to 50%) is expected and must live within commutable distance from major airport in Milwaukee, Detroit or Minneapolis. RESPONSIBILITIES: • Meet or exceed territory growth targets within established accounts on a quarterly and annual basis, • Conduct market research and develops a regional strategy for business growth by adding new customers, • Independently identify and pursue leads for new business at the local, state, and federal level, • Develop and deliver presentations and demonstrates GPS products and software to a variety of customers and potential customers ranging from top management to operational staff/users; this activity includes all offerings and equipment and the demonstration of software, • Provide customer feedback to management and makes constructive recommendations on required and/or desired enhancements to products and services, • Manage Value Added Resellers to insure maximum performance, • Respond to various requests for proposals, invitations to bid, and other acquisition processes in a complete and timely manner, • Complete biweekly sales activity reports and sales forecast in a timely and complete manner; summarize all activity and include detailed contact information, meeting summaries, open action items and travel activity, • Work closely with account management staff to ensure existing contract renewal, • High school diploma or equivalent, • Must possess a valid driver's license (if driving a customer- or company-owned vehicle), • Experience in developing presentation material, making presentations, conducting training, and managing accounts, • Minimum of five (5) years of sales, account management, or criminal justice electronic monitoring experience, • Microsoft Office training a plus., • Ability to gain a thorough command of and ability to effectively demonstrate all company products and services, • Strong oral, written, and presentation skills, • Excellent computer skills, specifically Microsoft Office suite applications (Word, Excel, Powerpoint), • Ability to develop and implement effective sales plans, • Drive to take active role in self-development, • Excellent interpersonal and customer service skills; ability to work and communicate with Engineering, Production, Customer Service and Management staff, • Ability to work effectively in a sales team environment, • Highest personal and professional ethics and integrity, • Bachelor's Degree in Criminal Justice, Business, Communication, or related field of study, • Previous experience working with criminal justice agencies, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Ten paid holidays annually, accrued sick time up to 200 hours max, Five PTO Days If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Starting Annual Salary of $90k per year. Requisition ID 2025-1479361

Job DescriptionDescription: When you join Eastbrook Academy, you aren’t just taking a job; you are joining a family. We are a vibrant, multi-ethnic community dedicated to supporting one another as we support our students. Here, your work is more than a list of tasks – it is an opportunity to build lasting relationships, foster character, and participate in the spiritual development of the families we serve. Are You the Right Fit? We are looking for team members who are: • Walking in Faith: Deeply committed to Jesus and eager to share His love through their daily actions., • Relationship-Oriented: Skilled at connecting with students, parents, and colleagues from all walks of life., • Passionate Experts: Highly skilled in your field and energized by the opportunity to inspire young minds. Duties/Responsibilities: • Integrate Biblical principles and perspectives throughout the Spanish curriculum; lead and participate in prayer during classes and staff meetings., • Design and deliver engaging, effective instructional activities for Spanish I through Spanish V., • Facilitate lessons based on approved curriculum and Standards for Foreign Language Learning, • Develop lesson plans that integrate specific competencies, goals, and objectives, utilizing diverse resources that reflect the varied backgrounds of our students., • Tailor instruction to accommodate various learning styles and proficiency levels, ensuring all students are challenged and supported., • Maintain a positive, Christ-centered climate using approved disciplinary procedures and “Warrior Way” messaging to encourage positive behaviors., • Maintain an accurate online grade book, grade assignments promptly, and perform other administrative duties with high attention to detail., • Communicate clearly and professionally with parents, staff, and leadership regarding student progress and classroom initiatives., • Maintain strict confidentiality regarding students, families, and internal school matters., • Facilitate lessons based on approved curriculum and Standards for Foreign Language Learning., • Proficiency in Spanish language.Requirements:, • Effective verbal and written communication skills with the ability to clearly represent the school’s mission and “voice.”, • Proficiency in Spanish language., • Professional interpersonal and negotiation skills used to navigate stakeholder interests and school-wide issues., • Thorough organizational skills with a high level of attention to detail regarding records and operations., • Productive time management skills with a proven ability to handle multiple priories and meet deadlines., • Analytical critical thinking skills used to identify and resolve institutional challenges., • Relational leadership style with a demonstrated ability to move projects forward through teamwork and influence., • Intentional ability to prioritize tasks, anticipate needs, and support the leadership team’s goals., • Composed demeanor when managing high-pressure situations, deadlines, or campus emergencies., • Technically Competent with educational software, data tools, and the Microsoft Office Suite/Google Suite., • Bachelor’s degree (B.A.) from an accredited four-year college or university in Spanish, Education, or a related field required., • Two or more years of classroom teaching experience at the high school level is preferred., • Prolonged periods of standing and speaking to a class., • Must be able to lift up to 15 pounds at times., • Frequent use of computer technology and interactive whiteboards.

Job Description Overview Report to the Electrical Lead and play a hands-on role in assembling and wiring industrial control panels. You’ll partner closely with a lead panel builder to translate schematics into clean, accurate builds that meet project timelines. A day in the role • Start with a safety-first mindset before every task., • Review electrical schematics and component documentation with the lead panel builder to plan the day’s build., • Wire control panels precisely to drawings, checking labels, routing, and terminations for accuracy., • Collaborate continuously with the Electrical Lead to keep work on schedule and resolve questions quickly., • Verify each panel against schematics to ensure correctness and quality., • Maintain, clean, and organize hand tools, power tools, measuring tools, and your work area., • Head to customer facilities when needed to assist with equipment installation and wiring; expect environments that can be hot, cold, or dirty., • Complete assigned tasks accurately within the allotted timeline; take on other duties as needed., • Actively support BCT’s Culture and Core Values. What you’ll bring, • Ability to read and interpret electrical schematics and technical documents., • Skilled with common panel-building tools: hand tools, power tools, and measuring devices., • Strong communication skills and a collaborative approach., • Organized, detail-focused, and able to juggle multiple priorities., • Basic computer proficiency., • Knowledge of electrical wiring, panel building, and troubleshooting is a plus. Proficiencies, • Valid driver’s license, • Electrical troubleshooting skills, • Electrical repair capability, • Field service readiness, • High school diploma or GED Note: Responsibilities and priorities may evolve; management may assign additional tasks as needed.

Job Description Job Description: Performs calibration of Gage Blocks, Threaded Plug and Ring Gages, Cylindrical Plug & Ring Gages and other hard gages to required specifications in accordance with ANSI, Military, Federal, and Manufacturer Specifications. Also perform similar calibration on various hand tool type gages such as calipers, micrometers, indicators, torque wrenches, etc. Measurements are recorded for generation of long form certificates traceable to The N.I.S.T. Calibrations are performed in QCS climate controlled laboratory environment. Job Duties (include but not limited to): All work is performed in accordance to specific procedures that comply with various standards and specifications. Calibration data is collected by taking measurements and recording the readings in QCS custom developed applications for generation of Long Form Certificate of Calibration. Where applicable, adjustments are made to bring the gages/ instruments into tolerance. Requires knowledge of gage application and functionality and be able to determine if a gage is in or out of tolerance by performing basic math. Must be able to follow and understand the calibration procedures & techniques while possessing the appropriate analytical abilities. Qualifications · Must be capable of working effectively individually or in a team environment. · 2 year technical school degree or equivalent level of education and/or work experience in a Quality or manufacturing discipline where gages were used, or Military (PMEL) training /experience. · Must be able to follow verbal and written instruction. · Good Math Skills · Must possess initiative and self motivation. · Ability to obtain and maintain accurate records & certifications. · Strong computer skills · Ability to work with data bases and know how to properly store and retrieve data · Good Mechanical Aptitude · Good Troubleshooting skills · Must have good communication skills and a professional appearance due to interface with customers. Benefits · Health Insurance · Dental Insurance · 401K Plan · Paid Vacation · Vision Insurance · Paid Holidays Company DescriptionQCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s) QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s)\r\n\r\n\r\n\r\nQCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.

Job Description The Reproductive Specialty Center (RSC) is an advanced gynecology and infertility practice located on the eastside of Milwaukee. RSC is looking for a bright, capable, personable Medical Billing Specialist with understanding of the entire billing cycle and enjoys working with patients. Responsible for the entirety of the billing function, including coding medical procedures, inputting daily charges, collecting, submitting claims, follow up and appeals with insurance companies, and posting of payments (cash, checks, credit charges). The position includes financial counselling with patients as many fertility services are not covered benefits. There is some flexibility in hours and number of days/week. 20 hours/ week Successful candidate requirements include: • Minimum 1 year of medical billing experience, • High school diploma or equivalent. Additional education preferred, • Computer skills in Microsoft Word/Excel and medical software i.e. Advanced MD, • Reliable, self-motivated individual with attention to detail

Job Description Manufacturing Engineer designs, implements, and optimizes the production processes that transform raw materials into finished products. Their primary goal is to maximize efficiency, reduce costs, and ensure high quality and safety throughout the manufacturing lifecycle. Core Responsibilities • Process Design & Optimization: Analyze existing workflows to identify bottlenecks and implement Lean Manufacturing or Six Sigma methodologies to reduce waste., • Equipment & Tooling: Evaluate, source, and install new manufacturing equipment and design custom tools, jigs, or fixtures to improve production capability., • Technical Documentation: Develop and maintain detailed Standard Operating Procedures (SOPs), work instructions, and Bills of Materials (BOM)., • Troubleshooting: Provide hands-on floor support to resolve technical malfunctions or production issues as they arise., • Quality & Compliance: Conduct Root Cause Analysis (RCA) for defects and ensure all processes meet ISO 9001 or industry-specific regulatory standards., • Education: A Bachelor’s degree in Manufacturing or Mechanical Engineering is typically required., • Technical Software: Proficiency in Computer-Aided Design (CAD) software like AutoCAD or SolidWorks, and familiarity with ERP/MRP systems like SAP., • Problem-Solving: Ability to use statistical tools (e.g., Minitab) and analytical methods (e.g., FMEA) to solve complex production challenges., • Industry Certifications:, • Certified Manufacturing Engineer (CMfgE): Recommended for those with 8+ years of experience., • Lean Six Sigma Green/Black Belt: Highly valued for process improvement roles. Manufacturing engineers split their time between a temperature-controlled office and the production floor, which can be noisy and require Personal Protective Equipment (PPE). Are you looking for a senior-level job description with leadership responsibilities, or an entry-level template for a recent graduate? Company DescriptionWe one of the largest and most experienced manufacturers of UL Listed diesel fuel day tanks, sub base tanks, enclosures and other products for industrial engine-generators. Our product line includes steel, galvanneal and aluminum weather-protected and sound-insulated gen-set enclosures, trailers, main tanks and full packaging capabilities.We one of the largest and most experienced manufacturers of UL Listed diesel fuel day tanks, sub base tanks, enclosures and other products for industrial engine-generators. Our product line includes steel, galvanneal and aluminum weather-protected and sound-insulated gen-set enclosures, trailers, main tanks and full packaging capabilities.

Job Description Assistant Professor of Education Position Summary: The teacher education programs at Mount Mary University embody the principles and values articulated in the University mission and values. The programs share the common purpose of creating reflective and ethical decision-makers who are competent, compassionate, and committed members of their education communities. It is the intent of each program to educate all pre-service teachers with a foundation in the arts and sciences, subject specialty, and personal and professional knowledge. Through University courses, clinical experiences, and personal and professional development, students develop an array of perspectives to bring insight and intentionality to their teaching practice. The department offers initial certification at the undergraduate and post baccalaureate levels and a Master of Arts in Education in Professional Development. This position is a tenure-track position, and it will offer opportunities to teach in all programs and provide service to the Department, University, and community. Primary Responsibilities: • Teaching day and evening classes offered primarily on campus and occasionally online using skills of communication, engagement, and adaptability while modeling best practices in instruction., • Teach a range of courses in undergraduate, post baccalaureate, and master's programs., • Provide service to the department including student advising, on-going curriculum development, and participation in university-wide faculty development meetings and experiences., • Collaborate to maintain state program approval processes., • Demonstrate a commitment to the mission, vision, and values of Mount Mary University., • Engage with current and prospective students through activities such as connection with student groups, attendance at university-sponsored or recruitment events., • Engage in scholarly activities that support and advance own teaching practice and the profession, including publication and/or presentation., • Supervise students in fieldwork and student teaching settings., • Collaborate with internal and external partners., • Experience in and understanding of current issues and developments in K-12 and higher education., • Documented leadership experience., • Experience with accreditation or program approval or evaluation., • Previous higher education teaching experience., • Experience in distance education and learning management systems desired., • Working knowledge and understanding of established professional codes of ethics and best practices for faculty in higher education., • Demonstrated commitment to promoting inclusiveness; experience working with underrepresented students., • Outstanding verbal and presentation skills; must be able to communicate and interact effectively with Mount Mary students, employees, alumnae, and partners., • Excellent collaboration skills., • Exceptional ability to multitask and prioritize projects., • Excellent oral, written, and interpersonal communication skills, including the ability to work with varied groups, facilitate group process and foster collaborative decision making., • Doctorate in Education (Ph.D. or Ed.D.)., • Minimum of 5 years of experience in K-12 Education., • Wisconsin teaching license in special education or eligibility for Wisconsin licensure., • May be required to lift up to 25 lbs., • Must reach, bend, stoop, and lift., • Must sit and/or stand throughout work day, sometimes for prolonged periods., • Some repetitive motion may be required., • Must listen carefully and communicate clearly to others in person, via video conferencing, and on the telephone., • Office and classrooms environments with varying levels of noise throughout the day., • Varying workflow; sometimes stressful, with high workload during peak times of the year., • Complete work required within a limited space., • Complete work required within a limited time. Mount Mary University encourages applications from all qualified candidates and is vitally committed to all aspects of diversity, equity, and inclusion. We welcome and encourage applications from qualified candidates and all will receive consideration for employment regardless of race, color, religion, sex, national origin, age, ethnicity, pregnancy, disability, genetic information, or any other groups protected by law. Mount Mary seeks to hire and retain personnel who will make a positive contribution to its mission, vision, and values. Job Posted by ApplicantPro

Job Description Overview Milwaukee, WI (9-Month Contract) CTG is looking for a Senior Infrastructure Automation Engineer to develop and maintain automation scripts for enterprise infrastructure. This role focuses on orchestrating server failovers, automating service restarts, IIS pool recycles, MSSQL queries, and HTTP REST calls for technologies like F5 or NetScaler load balancers. Experience with Python and automation tools like Ansible is essential. What You’ll Do: * Automate server failover, service restarts, and multi-tier workflows. * Configure and maintain Linux and Windows systems (kernel tuning, registry settings). * Develop scripts for load balancer and database operations. * Optimize existing automation for efficiency and reliability. Must-Have Skills: * Python scripting and/or Ansible automation expertise. * Strong experience with Windows/Linux systems administration. * Knowledge of REST APIs, F5/NetScaler, IIS, MSSQL. * Proven track record of enterprise infrastructure automation. Education: * Bachelor’s degree in Computer Science, Information Technology, or a related field (or equivalent practical experience). Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact JoAnn Abramo at . Kindly forward this to any other interested parties. Thank you!

Job DescriptionDescription: Vierbicher is a team of professional engineers, planners, community development specialists, land surveyors and GIS specialists who provide comprehensive solutions for a wide range of projects. Our goal is to provide clients with creative consulting services and quality products, enabling them to efficiently and effectively meet their goals. We work to build strong relationships with our clients that promote trust, cooperation and teamwork. As a Project Engineer 3, you are responsible for the completion and final quality assurance of all engineering design evaluations. You will be integral to the early stages of project development, providing critical input on scope, budget, and scheduling requirements. This role requires demonstrated technical proficiency, independent decision-making, and the ability to mentor junior engineering staff. Key Responsibilities: Project Scoping & Planning • Lead the preparation and definition of the scope of services for design work, ensuring clarity on client and project objectives., • Establish and manage design and construction schedules in coordination with Project Managers., • Perform final engineering design evaluations for all aspects of site and infrastructure plans (grading, utilities, stormwater, etc.)., • Provide quality control oversight on design work developed by Project Engineers 1 and 2, ensuring technical accuracy and adherence to standards., • Execute complex design tasks using AutoCAD Civil 3D, maintaining a high level of technical competency., • Ensure all project designs maintain strict compliance with all applicable codes, guidelines, best practices, and internal policies., • Develop and finalize project specifications and technical requirements., • Senior Technical Proficiency: Expert proficiency in AutoCAD Civil 3D and demonstrated ability to solve highly complex design issues., • Project and Scope Management: Proven ability to effectively influence project scope, schedule, and budgetary requirements., • Oversight and Mentorship: Ability to provide technical review, quality assurance, and mentorship to less experienced engineering staff., • Professional Communication: Exceptional written and verbal communication skills required for technical reporting, internal leadership, and external consultation with clients and senior regulatory officials., • Collaboration & Leadership: Ability to effectively lead and work with internal and external project team members, acting as a technical leader., • Bachelor’s Degree in Civil Engineering is required, • This position requires sitting at a desk and working at a computer for long period of time, • Some work may include field work, • Hi-Visibility clothing should be worn on job sites and in the field as necessary Equal Employment Opportunity/Affirmative Action Employer

Job DescriptionDescription: Since 1913, Hooper has grown to become a well-respected electric power and mechanical contractor with headquarters in Wisconsin and regional offices in the states of Colorado, Florida, and Ohio. Hooper provides a wide range of services to support commercial and residential clients. Hooper provides competitive compensation and many supportive benefits including Health, Dental, and Vision Insurance, Matching 401(k) plan, Paid Time Off (PTO), 9 paid holidays, Identity Theft Protection, Life Insurance, as well as Short-Term and Long-Term Disability coverage. General Summary: Provides administrative support for the mechanical contract department. Principal Accountabilities: • Assists project managers with letters, purchase orders, subcontracts, bids, proposals, transmittals, permit/inspection requests, pre-qualifications, copying, scanning, phone calls, e-mails, scheduling and meeting minutes., • Assist with project set up including assigning job number, determine submittals and O&M requirements and fill out submittal schedule to start submittal process., • Verify & approve invoices from vendors for project managers., • Review weekly employee timecards for project managers., • Composes and edits letters, memos, reports, procedures, etc. often from rough drafts ensuring correct grammar, punctuation and spelling., • Run open subcontract/purchase order reports & distribute to project managers., • Assist in keeping prints up-to-date., • Procures and returns plans for bid as directed., • Preferred 2-4 year degree in business, accounting or construction management., • Strong written and oral communication skills required. Attention to details and ability to problem solve., • Proficient with Excel and Word; requires good word processing skills and accuracy., • Requires a comprehensive understanding of the Company’s organizational structure and mechanical terminology.