Electrical jobs in Cherry Hill, New JerseyCreate job alerts

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee’s job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee’s job specialty. Maintains in-depth technical knowledge of numerous systems as the employee’s job specialty requires. Performs research and procedures as the employee’s job specialty requires. · Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. · Independently performs maintenance as per industry standards. · Complies with 5S and housekeeping standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. · Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. · Updates records and reviews CMMS history and analyzes data. · Provides technical contents of sales quotations and performs T&M duties as required. · Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. · Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use hand tools and specialized tools as appropriate. · May be required to travel. · Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$35.92—$45.93 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy ___ ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí ___

Working at Liberty Coca-Cola Beverages LLC is all about pursuing a career not just a job. Discover what it means to be energized by a multitude of possibilities and a dynamic team. About Liberty At Liberty Coca-Cola, we strive to make our workforce as inclusive and diverse as the communities we serve. Our associates are our #1 asset, and we are committed to investing in our people, maintaining the highest safety standards, and creating a culture of growth and innovation. We offer competitive compensation and benefit packages to full-time, regular associates, including: Medical, Dental, Vision, Prescription drug plans, 401K with company contributions, paid vacation, company paid holidays, and more. Discover what it means to be energized by a multitude of possibilities and a dynamic team. Join us here at Liberty Coca-Cola Beverages LLC. Summary The Multi-Craft Technician will work independently and with other plant personnel to perform preventative, predictive, and routine maintenance tasks and Annual Overhauls. The Multi-Craft Technician will troubleshoot, diagnose, and repair production and facilities equipment electrically and mechanically. The position is responsible for learning and assisting in performing/improving equipment changeover time ensuring maximum equipment efficiency and effectiveness. Selected candidates will also be involved with new equipment installations and facility maintenance. The Multi-Craft Technician will participate in and lead continuous improvement projects and conduct structured breakdown analysis on failed components. Safety and Compliance • Champion workplace safety initiatives and ensure compliance with safety protocols and promoting a safe work environment., • Ensure proper documentation of safety incidents and near-misses., • Comply with all PPE and GMP Standards., • Execute daily, weekly and shutdown activities according to schedule., • Perform LOTO on equipment as per Liberty Coca-Cola safety procedures., • Maintenance and repairs carried out as per works order, meeting all the quality and safety requirements., • Verify functionality of equipment after all repairs ensuring Quality/Production approval., • Enter work orders via CMMS for repairs and breakdowns and participate in root cause analysis., • Repair/Troubleshoot equipment breakdowns promptly to minimize production downtime, including utilizing PLC and operator HMI screens. • Assist with equipment changeovers as per production schedule., • Participate in change-over time reduction projects and improve ramp-up times., • Manage or establish centerlines of mechanical and electrical settings for each product type. Continuous Improvement • Perform root cause analysis on unresolved events leading to ineffective operations., • Carry out new project/equipment/improvement installations within expected time frames., • Other duties as assigned. Skills, Qualifications, and Abilities • HS Diploma or equivalent, • Certification in Mechanical, Electrical, HVAC, Mechatronic Engineering, or Automotive, • 3+ years as a multi-skilled technician in high-speed manufacturing preferred, • Ability to read electrical/mechanical blueprints, • Microsoft Office (Word, Excel, Outlook), • ERP & CMMS (SAP) experience, • Required Technical skills:, • SCADA & Networking, • Siemens & Allen Bradley PLC, • Single/three-phase electrical, • AC/DC motors & drives, • Required Mechanical skills, • Pneumatics & Hydraulics, • Pumps, valves, piping, • Conveyors, Welding/Fabricating, • Power Transmission, Precision tools, • Strong time management, mentoring, communication, problem-solving, and critical thinking, • Self-motivated and adaptable, • Physically able to lift 50 lbs., climb ladders, work in tight spaces Liberty Coca-Cola Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Click here to review Philadelphia's Fair Chance Hiring Law: For additional information, please visit our company website at Philadelphia Commission on Human Relations | Homepage Fighting discrimination, ensuring equal rights, and helping build stronger communities. Click here to review Philadelphia's Fair Chance Hiring Law: For additional information, please visit our company website at

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$35.92—$45.93 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy ___ ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí ___

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy ___ ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí ___

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$35.92—$45.93 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy ___ ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí ___

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/29/2025 3:14 PM) Requisition ID 2025-190625 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Pennsauken, NJ For More Info Call Jason or Text "Pennsauken" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "Pennsauken" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 2 weeks ago (11/18/2025 10:11 AM) Requisition ID 2025-191654 Location (Posting Location) : State/Province NJ Location (Posting Location) : City PENNSAUKEN Location (Posting Location) : Postal Code 08110 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel and Auto Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:23 PM) Requisition ID 2025-192013 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:25 PM) Requisition ID 2025-192014 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call William or Text "Philly MS2" to 904-541-8565 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:05 PM) Requisition ID 2025-191921 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Chelsey or Text "Philly MS2" to 904-932-0143 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:10 PM) Requisition ID 2025-191924 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 11 hours ago (12/3/2025 8:52 AM) Requisition ID 2025-192310 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/3/2025 8:54 AM) Requisition ID 2025-192311 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Stability Healthcare is seeking a local contract Electrophysiology Technician for a local contract job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #L-801550. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Electrophysiology Tech About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Stability Healthcare is seeking a local contract nurse RN Electrophysiology Lab for a local contract nursing job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Electrophysiology Lab, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #L-797368. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: EP About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Stability Healthcare is seeking a travel nurse RN Electrophysiology Lab for a travel nursing job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Electrophysiology Lab, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #797368. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: EP About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Stability Healthcare is seeking a travel Electrophysiology Technician for a travel job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #801550. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Electrophysiology Tech About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Delphinus Engineering is seeking a Systems Engineer to support our customers with US Navy tasking. This position will develop, review, and support testing of shipboard and shore based systems to include hardware, software, and network interfaces. Applicants must have experience in the design, assembly, troubleshooting, systems engineering development for shipboard systems, including the ability to work with cross functional teams to develop new features, troubleshoot existing systems, and create, modify, and/or use system documentation and schematics. The position will complete assigned tasking and work with teams including Navy customer personnel and other organizations to provide solutions to the fleet. LOCATION: Hybrid: 50% Remote/50% On Location (Philadelphia, PA.) PRINCIPAL DUTIES & RESPONSIBILITIES: • Support existing systems delivered to the Navy and advise Navy personnel on strategies for upgrading, life cycle support, and maintenance of fielded software and hardware., • Advise Navy teams on system architecture, software frameworks and development strategies, and optimize development, test, and fielding plans., • Lead new development projects to upgrade, enhance, or alter existing HM&E systems for both shipboard installations and shore based labs., • Generate, modify, and review requirements and design specifications and assist with the Navy's systems engineering process for development and test HM&E systems., • Generate and execute test plans and procedures. Support performance of validation and verification testing of HM&E systems., • Troubleshoot, modify, construct and test various types of electrical and/or Navy shipboard HM&E equipment., • Review existing software, generate new software, and correct, convert, and/or modify existing code to meet specifications., • Create and update technical documentation such as users' manuals, product specifications, and training materials., • Apply technical knowledge of systems engineering principles in order to put equipment in operational condition and solve complex problems., • Troubleshoot and correct malfunctions using specialized test and diagnostic equipment such as network traffic analyzers, digital multi-meters, or oscilloscopes, • Make recommendations for improvements or modifications to correct problems., • Track issues identified in test or deployment to resolution through the product lifecycle, • Prepare operating and malfunction reports and related documentation., • Assist with quality assurance testing of assemblies and equipment fabricated by other technicians., • Bachelor's Degree in Electrical Engineering, Computer Engineering or Mechanical Engineering, • Experience with development and testing of shipboard HM&E systems. Must have ability to read and interpret ladder logic diagrams., • Basic mechanical and electrical principals and how to effectively troubleshoot equipment and design integration., • Experience with Navy systems preferred., • Ability to read electrical schematics., • Proficiency with Microsoft Office suite (especially Excel, Word, and Outlook)., • Candidates must have an active government security clearance or the ability to obtain security clearance., • The work is hybrid, with performance remotely, at contractor offices, and at client site locations which may be office, lab, or shipboard environments. Work may be performed onboard US Navy Ships (pier side and at sea), which requires proper safety precautions and ability to go up and down shipboard stairways (ladders); work may require some physical effort in the handling of light materials, boxes, or equipment., • Requests for reasonable accommodations will be considered to enable individuals with disabilities to perform the principal (essential) functions of this job., • The above job description is not intended to be, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Exempt Req Number ENG-25-00001 This position is currently accepting applications.

Job Description: Why Choose Us Joining The American Red Cross is like nothing else – it’s as much something you feel as something you do. You become a vital part of the world’s largest humanitarian network. Joining a team of welcoming individuals who are exceptional, yet unassuming. Diverse, yet uncompromising in unity. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better. When you choose to be a force for good, you’ll have mentors who empower your growth along a purposeful career path. You align your life’s work with an ongoing mission that’s bigger than all of us. As you care for others, you’re cared for with competitive compensation and benefits. You join a community that respects who you are away from work as much as what you do while at work. Where Your Career is a Force for Good! The American Red Cross is currently seeking a Building Engineer for our 700 Spring Garden St. facility in Philadelphia, PA. The facility is regulated by the FDA. It is 245,000 square feet. Experience working in an FDA-regulated, GPM (Good Manufacturing Practice) facility is highly preferred. WHAT YOU NEED TO KNOW (Job Overview): Under minimal guidance, the Building Engineer will oversee and conduct maintenance and repair in specific, regulated American Red Cross buildings. Advise in the planning for building systems, electricity, equipment repair, building design and general building maintenance. The Building Engineer will maintain basic knowledge of structural systems, control systems, code issues, and ability to recognize problematic mechanical devices. Perform all duties and responsibilities in compliance with standard operating procedures and other applicable Federal, State, and local regulations. WHERE YOUR CAREER IS A FORCE FOR GOOD (Key Responsibilities): * Act as onsite subject matter expert on building engineering. Advise in the planning for building systems, electricity, equipment repair, building design and general building maintenance. * Perform a variety of service work in specialized building systems such as mechanical, electrical / electronic, hydraulics, carpentry, or machine servicing. Assist in operations and maintenance issues, troubleshooting and problem solving as required. Conduct preventive and corrective maintenance on all HVAC equipment and other related machinery. * Ensure all regulatory operations meet the minimum compliance standards. Maintain both the ongoing regulated training to perform assigned regulatory tasks and the relevant role specific training, in compliance with regulatory requirements. * Enforce organization safety policies, regulations and procedures related to facilities management to ensure they are always followed. Perform facility safety and fire extinguisher inspections, schedule fire drills, and maintain safety documentation., oversee emergency generator, and create/issue security access cards. Monitor security surveillance system and equipment as needed. * Oversee and maintain facility maintenance work-order system to include coordination and timely submission of work orders and provide maintenance dispatch for emergency requests. * Provide administration support to include coordination and preventative maintenance schedules, ordering department supplies, record and log maintenance, and coordination and submission of work orders. Maintain accurate operational logs of equipment in building. * May receive regulated supplies and oversee bio-waste pick-ups, supplies and destruction manifests. WHAT YOU NEED TO SUCCEED: * Education: Bachelor's degree or equivalent trade school certificate required. Current Universal Refrigerant license, OSHA 10 and HVAC certification required. ASHE (i.e. American Society for Healthcare Employees) membership or ability to obtain and maintain preferred. * Experience: Minimum 7 years of related experience, preferably within laboratory, hospital setting, SDS or CGMP controlled environments. * Current Universal Refrigerant license, OSHA 10 and HVAC certification required. ASHE (i.e. American Society for Healthcare Employees) membership or ability to obtain and maintain preferred * Management Experience: N/A * Skills & Abilities: * Must be able to operate independently, with initiative, and support an assigned area of responsibility, with minimal supervision. * Competent in both electrical and plumbing areas of knowledge. * Basic working knowledge of emergency power generators. * Ability to assess building envelope (roof, structure, etc.) * Familiar with NFPA (fire codes), building codes, NEC (electrical codes), PMs and PM management systems Experience with training teams, capital project forecasting and annual budgets. * Prior experience performing relationship management with vendors, partners, suppliers. * Able to read and understand MEP and wiring (mechanical electrical plumbing) diagrams. * Ability to work on a team. * Travel: Will involve some travel. A current, valid driver's license is required. *Combination of candidate’s education and general experience satisfies requirements so long as the total years equate to description’s minimum education and general experience years combined (Management experience cannot be substituted). DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified. PAY INFORMATION: The annual salary range for this position is $90,000 - $110,000. We do not offer an annual bonus for this role. This position may be eligible for relocation assistance. Note that American Red Cross salaries are aligned to the specific geographic location in which the work is primarily performed. Other factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role. We will review specific salary information at the time of phone screening based upon your location & experience. BENEFITS FOR YOU: As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive package includes: · Medical, Dental Vision plans · Health Spending Accounts & Flexible Spending Accounts · PTO: Starting at 19 days a year; based on type of job and tenure · Holidays: 11 paid holidays comprised of six core holidays and five floating holidays · 401K with up to 6% match · Paid Family Leave · Employee Assistance Program · Disability and Insurance: Short + Long Term · Service Awards and recognition The American Red Cross is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, San Diego Fair Chance Ordinance, the California Fair Chance Act and any other applicable state and local laws. AmeriCorps, the federal agency that brings people together through service, and its partners — the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance — launched Employers of National Service to connect national service alumni with opportunities in the workforce. American Red Cross is proud to be an ___ partner and share our employment opportunities with the network of organizations. Interested in Volunteering? Visit___ to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: ___

Care Career is seeking a travel Physical Therapist for a travel job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Care Career Job ID #35017413. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Rehabilitation Physical Therapist (PT) About Care Career Care Career brings together a portfolio of leading healthcare staffing organizations, each delivering specialized talent solutions across the industry. Wherever you want to go, We Make It Happen. With travel nursing jobs across the country, you can discover the possibilities that create the lifestyle and financial position that you have dreamed of. Care Career is a modern, transparent staffing firm creating the ultimate community of US. Benefits • Referral bonus, • Weekly pay, • Medical benefits, • Continuing Education, • Dental benefits, • Vision benefits

Responsibilities Noblis MSD's mission is to support the Naval Sea Systems Command (NAVSEA) and, Naval Surface Warfare Center (NSWCPD) and their missions' to enable research, development, test and evaluation, acquisition, engineering, systems integration, in-service and fleet engineering with cybersecurity, comprehensive logistics, and life-cycle savings. We are looking to hire a Submarine Systems Quality Assurance Specialist to provide support to varies Submarine Classes for the US Navy. This position is for a Machinery Controls System Engineer. The main function of the candidate will be to provide lifecycle support of fielded Machinery Control Systems (MCS) on the USS ARLEIGH BURKE class of destroyer. This includes shipboard support as well as Land Based Engineering Site (LBES) support. The USS ARLEIGH BURKE MCS is comprised of four (4) different variants spanning various technologies. PRINCIPAL RESPONSIBILITIES: \n • Lifecycle support of the supervisory machinery control system which includes, but is not limited to: \n, • Troubleshooting complex problems of all variants of fielded systems (microprocessor based control systems) both at LBES and shipboard \n, • Review of technical documentation related to all variants of fielded systems and future fielded systems \n, • Provide test support for all variants of fielded systems at LBES \n, • Provide shipboard SW & HW installation support of all variants of fielded systems at LBES \n, • Provide technical input to the design of future MCS systems \n, • Develop test procedures to exercise requirements of fielded systems and future fielded systems \n \n • Bachelor of Science degree in Electrical Engineering or Computer Engineering preferred, other degrees will be considered based on experience and must have 3+ years of experience in electrical engineering, systems engineer or computer engineering as it pertains to control systems in an industrial environment\n, • Proficiency in reading electrical diagrams or schematics \n, • Proficiency in the use of test tools associated with industrial control systems \n, • Us Citizen with a DoD Secret Clearance or the ability to obtain one\n, • Ability to acquire a U.S. Passport or currently have one\n, • Lift and carry (with assistance) up to 50 pounds\n, • Access and maintain equipment located in confined spaces\n, • Ascend/descend ramps/ladders/stairs and work comfortably at varying heights\n, • Reach overhead to handle, install, position and move materials\n, • Perform routine maintenance tasks while crouching, stooping and kneeling\n, • Work in environments with temperature fluctuations, including both hot and cold conditions\n, • Sustain physical activity for extended periods, as well as maintaining balance\n, • See details at close range, at a distance and from side to side\n, • Knowledge of the fundamental concepts, practices, and procedures associated with industrial control systems \n Noblis and our wholly owned subsidiaries, Noblis ESI, and Noblis MSD tackle the nation's toughest problems and apply advanced solutions to our clients' most critical missions. We bring the best of scientific thought, management, and engineering expertise together in an environment of independence and objectivity to deliver enduring impact on federal missions. Noblis works with a wide range of government clients in the defense, intelligence and federal civil sectors. Learn more at Noblis -About Us Why work at a Noblis company? Our employees find greater meaning in their work and balance the other things in life that matter to them. Our people are our greatest asset. They are exceptionally skilled, knowledgeable, team-oriented, and mission-driven individuals who want to do work that matters and benefits the public. Noblis has won numerous workplace awards. Noblis maintains a drug-free workplace. *Remote/hybrid status is subject to change based on Noblis and/or government requirements Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, sex, age, national origin, religion, physical or mental disability, pregnancy/childbirth and related medical conditions, veteran or military status, or any other characteristics protected by applicable federal, state, or local law. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact us. EEO is the Law | E-Verify | Right to Work Total Rewards At Noblis we recognize and reward your contributions, provide you with growth opportunities, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, and work-life programs. Our award programs acknowledge employees for exceptional performance and superior demonstration of our service standards. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in our benefit programs. Other offerings may be provided for employees not within this category. We encourage you to learn more about our total benefits by visiting the Benefits page on our Careers site. Compensation at Noblis is determined by various factors, including but not limited to, the combination of education, certifications, knowledge, skills, competencies, and experience, internal and external equity, location, clearance level, as well as contract-specific affordability, organizational requirements and applicable employment laws. The projected compensation range for this position is based on full time status. For part time or on-call staff, compensation is proportionately adjusted based on hours worked. While monetary compensation is important, it's just one component of Noblis' total compensation package. Posted Salary Range USD $78,900.00 - USD $123,300.00 /Yr.

Embedded Software Engineering Manager. Collaborate seamlessly with Systems, Electrical, and other Engineering Managers to strategically allocate engineering assignments, ensuring optimal productivity and alignment with program schedules and goals.

Job Description Company Background At Brandywine, 'Best of Class' is our mission and our focus in developing, building, and managing the nation's most remarkable Class-A office, multi-family, and mixed-use properties. We continuously support and give back to the communities in which we live and work. Our mission drives our corporate culture to foster the potential for excellence in every employee. Our company was founded in 1994 by Jerry Sweeney, who serves as our President and CEO. We are a publicly traded company listed on the New York Stock Exchange (NYSE: BDN) operating in select markets across the nation. Summary Brandywine Realty Trust is seeking a Valet Attendant. This is a customer-facing role, so our ideal candidate will have strong people skills and enjoy interacting with others. This will be the first shift. The Valet Attendant will be responsible for assisting with other duties at other nearby locations. The Valet Attendant must be able to drive manual transmission (stick shift). This shift is 2:00 PM to 10:00 PM. Responsibilities Responsibilities for this role include, but may not be limited to: • Perform regular patrol on all parking levels, • Assist customers who need vehicles parked, retrieved or moved, • Ensure operation of all vehicles efficiently for valet service and provide tags for all vehicles, • Control traffic at entrance and exits at all times, • Perform repairs on all parking equipment if required. If unable to repair, contact supervisor for instructions., • Ensure compliance to all safety regulations and company policies, • Evaluate parking to ensure optimal utilization of area, • Provide superior customer service, • Interact with parking patrons in a friendly and positive manner, • Attend periodic meetings and training sessions, • Must be in compliance with uniform appearance standards while on duty, • Maintain cleanliness of the parking facility, • Routine maintenance, • Must possess a valid drivers’ license, • Ability to drive manual transmission (stick shift)., • Ability to operate and drive manual transmission vehicles Language Skills • Read and interpret English language documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Communicate both written and orally with customers, co-workers, and the Parking Manager. Computer Skills • Utilize basic PC-based business software, including Microsoft products for word processing and email. Reasoning Ability • Apply sound judgment in conducting instructions, which come in either written, oral, or diagram form., • Apply technical training received on-the-job or in formal class settings to day-to-day activities. Interpersonal Abilities • Exhibit excellent customer-service skills., • Display follow-through in conducting directions from management., • Demonstrate teamwork skills in relations with co-workers., • Proven customer support experience., • Customer orientation and ability to adapt/respond to different types of characters. Physical Requirements – Per OSHA The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent: Standing; walking; talking; hearing; using close and distant vision, color vision, peripheral vision, depth perception. Occasional: Sitting; use of hands to feel or grasp; reaching with hands and arms; climbing or balancing; working on a ladder, stooping; kneeling; crouching; lifting objects up to 50 lbs. in weight. Work Environment • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Company Background At Brandywine, 'Best of Class' is our mission and our focus in developing, building, and managing the nation's most remarkable Class-A office, multi-family, and mixed-use properties. We continuously support and give back to the communities in which we live and work. Our mission drives our corporate culture to foster the potential for excellence in every employee. Our company was founded in 1994 by Jerry Sweeney, who serves as our President and CEO. We are a publicly traded company listed on the New York Stock Exchange (NYSE: BDN) operating in select markets across the nation. Summary Brandywine Realty Trust is seeking a Valet Attendant. This is a customer-facing role, so our ideal candidate will have strong people skills and enjoy interacting with others. This will be the first shift. The Valet Attendant will be responsible for assisting with other duties at other nearby locations. The Valet Attendant must be able to drive manual transmission (stick shift). This shift is 6:00 AM to 2:00 PM. Responsibilities Responsibilities for this role include, but may not be limited to: • Perform regular patrol on all parking levels, • Assist customers who need vehicles parked, retrieved or moved, • Ensure operation of all vehicles efficiently for valet service and provide tags for all vehicles, • Control traffic at entrance and exits at all times, • Perform repairs on all parking equipment if required. If unable to repair, contact supervisor for instructions., • Ensure compliance to all safety regulations and company policies, • Evaluate parking to ensure optimal utilization of area, • Provide superior customer service, • Interact with parking patrons in a friendly and positive manner, • Attend periodic meetings and training sessions, • Must be in compliance with uniform appearance standards while on duty, • Maintain cleanliness of the parking facility, • Routine maintenance, • Must possess a valid drivers’ license, • Ability to drive manual transmission (stick shift)., • Ability to operate and drive manual transmission vehicles Language Skills • Read and interpret English language documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Communicate both written and orally with customers, co-workers, and the Parking Manager. Computer Skills • Utilize basic PC-based business software, including Microsoft products for word processing and email. Reasoning Ability • Apply sound judgment in conducting instructions, which come in either written, oral, or diagram form., • Apply technical training received on-the-job or in formal class settings to day-to-day activities. Interpersonal Abilities • Exhibit excellent customer-service skills., • Display follow-through in conducting directions from management., • Demonstrate teamwork skills in relations with co-workers., • Proven customer support experience., • Customer orientation and ability to adapt/respond to different types of characters. Physical Requirements – Per OSHA The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent: Standing; walking; talking; hearing; using close and distant vision, color vision, peripheral vision, depth perception. Occasional: Sitting; use of hands to feel or grasp; reaching with hands and arms; climbing or balancing; working on a ladder, stooping; kneeling; crouching; lifting objects up to 50 lbs. in weight. Work Environment • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Heidelberg Materials is seeking a Maintenance Technician at our Camden Slag Plant in Camden, NJ. This position is a rotating 7am-7pm and 7pm-7am schedule. Two-week period on days and then two-week period on nights with days off in between. If you have previous heavy industrial maintenance experience, Heidelberg Materials wants to hear from you! About the Company: Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. We're dedicated to our goal to create sustainable value with industry-leading products and solutions to satisfy the construction needs of our customers around the world. We are Building a Better Future for our people, our customers, our communities and our shareholders. What You'll Get To Do As a Maintenance Techician you will perform preventative and corrective mechanical and electrical maintenance activities on plant equipment. You will execute and provide accurate feedback on work orders and inspection sheets. Earn $28 per hour plus regular overtime! Requirements: • High school diploma or equivalent (GED), • Previous heavy industrial maintenance experience required, • Knowledge of different types of bearing (application) in rotating equipment is essential, • Ability to perform all technical aspects of the job by using all tools or systems required to perform the work. (MIG and ARN welders, cutting torch, plasma cutter, micrometers and calipers; Hoisting and rigging equipment, hand tools, hydraulic jacks), • Ability to execute periodic calibration on instrumentation, including scales, probes, feeders, etc., • Ability to perform required information for spare parts purchasing and perform physical inventory as needed. Ensure any special tools and equipment required for a maintenance activity are returned in a timely fashion and in good condition., • Ability to read, write, and comprehend simple correspondence, • Ability to work different shifts, holidays and/or overtime as required, • Competitive Pay – Earn $28 per hour plus regular overtime, • 401k with employer match, • Year-Round Health, Dental & Vision Insurance, • Life Insurance, • Vacation & Paid Holidays If this sounds like an opportunity you would be interested in, please visit our application page by clicking here. Heidelberg Materials is a drug-free workplace. All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR DzA0OJGlVW

Job Description Provincial Senior Living, proudly part of the Discovery Senior Living family of operating companies, manages lifestyle-focused senior living communities. Our company, which was built on our “Pillars of Excellence,” employs thousands of vital Team Members and is committed to providing a positive work environment and culture that recognizes their value in providing excellent experiences for our residents. We offer rewarding career opportunities that include: • Competitive wages, • Access to wages before payday, • Flexible scheduling options with full-time and part-time hours, • Paid time off and Holidays (full-time), • Comprehensive benefit package including health, dental, vision, life and disability insurances (full-time), • 401(K) with employer matching, • Paid training, • Opportunities for advancement, • Meals and uniforms Responsibilities: • Responsible for assisting with maintaining a safe, clean and comfortable environment for the residents, guests and team members., • Performs routine maintenance duties to complete all service requests for repair and maintenance of all grounds, buildings, apartment homes, equipment and vehicles in a timely and cost-efficient manner., • Routine maintenance duties may include: fixing wall and/or floor coverings; repairing furniture and fixtures; performing basic plumbing work; performing minor electrical repairs; repairing appliances; painting and refurbishing projects., • Assists in the execution of the preventative maintenance program., • Assists with working on heating and air conditioning systems, domestic water systems and pumps, refrigeration systems, motors, fans, electrical systems and emergency generators., • Performs carpet and hard surface floor maintenance., • Performs deep cleaning and resident suite ‘make ready’ rooms as assigned., • High School diploma or GED., • Technical school education preferred., • One (1) year maintenance and/or housekeeping experience preferred., • Must have basic technical knowledge (such as HVAC, plumbing, electrical, mechanical and code compliance) and mechanical ability to perform routine maintenance and repair on mechanical and electrical equipment and possess a basic knowledge of construction principles., • Must possess a general understanding of OSHA, fire prevention, life and safety regulations. EOE D/V

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers in the Allentown, PA area who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of Allentown, PA in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in Pennsylvania on an as-needed basis As a Distribution Engineer, you can expect to: • Perform design engineering for Leidos electric utility customers, • Develop work packages for OH, UG, URD, and Make Ready, using customer GIS and WMS systems such as EFD, AUD, Smallworld, ArcGIS, Infor, EAM, STORMS, and Maximo, • Manage scope, schedule, and budget of work assigned., • Perform functional tasks, planning, and/or customer follow-up, • Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities, • Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables, • Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications, • Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages What Sets You Apart (Background Requirements): • 4+ years of prior relevant experience is required. Relevant experience is either working directly with an electric utility or an electric utility consulting company performing design engineering for electric distribution., • Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree, • Experience and demonstrated proficiency with the National Electric Safety Code (NESC), • Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations., • Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates)., • Ability to demonstrate strong written, verbal and interpersonal communications skills You Might Also Have Some previous experience with: • Providing estimated costs, development of a BOM, calculating the CIAC., • Design tools such as Pole Foreman, Pull Planner, and Katapult., • Work management software and job estimating software., • CAD or MicroStation – Performing Electrical Distribution Design, • Experience in providing Quality Assurance (QA) and Quality Control (QC) for Design Projects, • High level organization and project management skills, • Ability to uptrain entry level resources and create process documents Professional Attributes that will help you succeed in this role: • Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations., • Ability to work with limited supervision, • Positive attitude, • Professional dress and demeanor At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. October 20, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $72,150.00 - $130,425.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers in the Allentown, PA area who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of Allentown, PA in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in Pennsylvania on an as-needed basis As a Distribution Engineer, you can expect to: • Perform design engineering for Leidos electric utility customers, • Develop work packages for OH, UG, URD, and Make Ready, using customer GIS and WMS systems such as EFD, AUD, Smallworld, ArcGIS, Infor, EAM, STORMS, and Maximo, • Manage scope, schedule, and budget of work assigned., • Perform functional tasks, planning, and/or customer follow-up, • Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities, • Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables, • Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications, • Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages What Sets You Apart (Background Requirements): • 4+ years of prior relevant experience is required. Relevant experience is either working directly with an electric utility or an electric utility consulting company performing design engineering for electric distribution., • Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree, • Experience and demonstrated proficiency with the National Electric Safety Code (NESC), • Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations., • Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates)., • Ability to demonstrate strong written, verbal and interpersonal communications skills You Might Also Have Some previous experience with: • Providing estimated costs, development of a BOM, calculating the CIAC., • Design tools such as Pole Foreman, Pull Planner, and Katapult., • Work management software and job estimating software., • CAD or MicroStation – Performing Electrical Distribution Design, • Experience in providing Quality Assurance (QA) and Quality Control (QC) for Design Projects, • High level organization and project management skills, • Ability to uptrain entry level resources and create process documents Professional Attributes that will help you succeed in this role: • Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations., • Ability to work with limited supervision, • Positive attitude, • Professional dress and demeanor At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. October 20, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $72,150.00 - $130,425.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking a Senior Distribution Engineer in the Allentown, PA area who is passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of Allentown, PA in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in Pennsylvania on an as-needed basis As a Distribution Engineer, you can expect to: • Perform design engineering for Leidos electric utility customers, • Develop work packages for OH, UG, URD, and Make Ready, using customer GIS and WMS systems such as EFD, AUD, Smallworld, ArcGIS, Infor, EAM, STORMS, and Maximo, • Manage scope, schedule, and budget of work assigned., • Perform functional tasks, planning, and/or customer follow-up, • Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities, • Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables, • Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications, • Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages What Sets You Apart (Background Requirements): • 8+ years of prior relevant experience is required. Relevant experience is either working directly with an electric utility or an electric utility consulting company performing design engineering for electric distribution., • Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree, • Experience and demonstrated proficiency with the National Electric Safety Code (NESC), • Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations., • Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates)., • Ability to demonstrate strong written, verbal and interpersonal communications skills You Might Also Have Some previous experience with: • Providing estimated costs, development of a BOM, calculating the CIAC., • Design tools such as Pole Foreman, Pull Planner, and Katapult., • Work management software and job estimating software., • CAD or MicroStation – Performing Electrical Distribution Design, • Experience in providing Quality Assurance (QA) and Quality Control (QC) for Design Projects, • High level organization and project management skills, • Ability to uptrain entry level resources and create process documents Professional Attributes that will help you succeed in this role: • Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations., • Ability to work with limited supervision, • Positive attitude, • Professional dress and demeanor At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. October 17, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $89,700.00 - $162,150.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description We are offering an exciting opportunity for a Traffic Designer in the Transportation Department of our Mount Laurel, NJ, office. The successful candidate will provide traffic analysis and design capabilities and assistance with highway/civil design efforts. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Assist in the design of traffic signal/electrical plans and intersection and highway lighting systems, • Perform intersection and roadway capacity analyses using HCS, Synchro, and SimTraffic software, • Assist in the design and development of conceptual construction staging alternatives and development of traffic control and traffic signing and striping plans, • Assist in the design of ADA-compliant facilities, • Bachelor of Science in Civil Engineering (BSCE), • EIT certification, • PE license a plus, • Zero to five years of experience, • MicroStation experience, • Traffic analysis experience We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

Job Description Job Title: Electrical/Electronic Engineer II/III Location- Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking a skilled Electrical/Computer Engineer to support critical ship system processes, design, and development for naval and maritime operations. This role involves providing technical expertise, conducting system assessments, and contributing to the design and testing of advanced electrical and electronic systems aboard Navy vessels. Key Responsibilities: \n • Provide support for process control equipment related to ship systems.\n, • Perform electric valve actuator assessments, training, and technical assistance for ship personnel during repair and testing.\n, • Participate in the design, development, or modification of new and existing Systems Engineering Processes (SEP) and Capability Maturity Model Integration (CMMI).\n, • Review of technical documentation related to all variants of fielded systems and future fielded systems. \n, • Provide design support for integration of equipment in an industrial/shipboard environment.\n, • Collaborate on solutions to enhance system performance and reliability.\n, • Provide software and hardware installation support.\n, • Troubleshoot complex problems of all systems. \n, • Support auxiliary systems including fuel and lube oil systems, pumps, heat exchangers, smart valves, life support and compressed air systems. \n, • Apply expertise in Human Machine Interface (HMI) and Programmable Logic Controller (PLC) applications to improve shipboard operations.\n\n Experience and Skills Qualifications: • B.S. Degree in Electrical or Computer Engineering from an accredited college or university.\n, • Minimum of 4 years of professional experience in electrical engineering. \n, • Minimum of 3 years of experience working with HMI and PLC applications. \n, • Extensive experience with auxiliary fluid support systems and a strong understanding of Navy programs, organizations, and functions.\n Skills and Attributes: \n • Strong analytical and problem-solving abilities.\n, • Knowledge of fundamental concepts, practices, and procedures with industrial control systems.\n, • Proficiency in reading electrical diagrams.\n, • Knowledge of network troubleshooting tools.\n, • Proficiency in the use of testing and diagnostic tools associated with industrial control systems.\n, • Proficiency in designing, modeling, and testing advanced systems.\n, • Excellent communication and technical documentation skills.\n, • Knowledge of naval systems and shipboard operations.\n\n This is an exciting opportunity to work on cutting-edge projects that enhance the operational readiness of Navy vessels. If you're a motivated engineer ready to contribute to mission-critical solutions, we encourage you to apply today. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Benefits: Learn more about us: See all of our latest opportunities at or follow us on our LinkedIn page at:. To be considered you must apply by going to . Continental Tide is an Equal Opportunity Employer - minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. Continental Tide participates in E-Verify and U.S. citizenship is required for most positions. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Description At IPS, we're all about exceptional service and exceptional people. We're looking for a passionate In-Shop Technician who loves hands-on work, takes pride in their craft, and wants to have a meaningful impact. As an In-Shop Technician, every day will be different. You'll get to apply your knowledge and skills to solve complex problems and help critical industries keep their equipment running. As a company, we prioritize safety in everything we do and offer opportunities for growth, job longevity, and continuous improvement. If you're looking for a role that values your skills and dedication, IPS is where you'll thrive. Responsibilities & Expectations: We are looking for a skilled Winder to join our team. As a Winder for IPS, you'd be responsible for rewinding various kinds of basic electromechanical equipment including removing the original winding, inspecting for winding failure damage, recording data from the original winding, making new coils, winding, and performing voltage testing on standard/basic windings. This is a progressive role that will be filled at the level based on the skills and experience of the selected candidate. Responsibilities may include: \n • Rewind various kinds of electromechanical equipment\n, • Dismantle and/or strip damaged or unserviceable electromechanical equipment, including media blasting\n, • Inspect various kinds of electromechanical equipment for winding damage and evidence of electrical malfunctions\n, • Document/record all relevant data specific to unit's electromagnetic characteristics, operating conditions, existing damage, or intended serviceability\n, • Prepare all reusable parts for rewinding and inspect renewed parts for hidden, structural damage or unusual conditions.\n, • Ability to strip stator or apparatus without damage to core or iron\n, • 5+ years of experience in rewinding AC and DC electric motors\n, • Prior practice in winding fields, armatures, and synchronous rotor poles\n, • Ability to perform basic math functions including addition, subtraction, multiplication, and division including understanding fractions\n, • Ability to read, write, and comprehend simple to moderately complex written and verbal instructions\n, • Ability to understand, perform, and retain various job-related training, operational, and safety procedures\n, • Ability to operate and perform VPI\n, • Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards\n, • Ability to stand, stoop, kneel, and bend for prolonged periods of time \n • Lead with integrity and prioritize safety. You demonstrate high standards and commit to a safe, ethical workplace., • Value teamwork and accountability. You work well with others, take responsibility, serve others, and deliver on your commitments., • Focus on the customer. You are dedicated to providing an unmatched customer experience and exceeding expectations., • Have an entrepreneurial spirit. You're proactive, innovative, and thrive in a fast-paced environment., • Communicate effectively and with purpose. You keep everyone informed with clear, concise communication., • Stay curious and love to learn. You continuously seek new knowledge and grow personally and professionally. Who We Are: At Integrated Power Services (IPS), we're committed to empowering you to make a meaningful impact. As the industry's leading and fastest-growing service provider, IPS offers single-source electromechanical and power management solutions to enhance the reliability of critical infrastructure across North America and the United Kingdom. We serve over 30,000 essential customer locations, from renewable energy pioneers to hospitals, manufacturers, and municipalities, helping them avoid costly downtime and ensure mission-critical operations. When you join IPS, you're joining a team that's revolutionizing equipment and process reliability across diverse sectors, from power generation to petrochemicals, and beyond. You'll learn from industry experts, grow alongside a talented workforce, and be part of a company that is built on the Shared Values of Safety, Integrity, Teamwork, Accountability, Customer Focus, and Entrepreneurial Spirit. Benefits: \n • Paid Time Off (PTO)\n, • 401k Employer Match\n, • Bonus Incentives \n, • Tuition Reimbursement Program \n, • Medical, Dental and Vision plans\n, • Employee Assistance Program (EAP) \n, • And more!\n\n IPS is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status. Any offer of employment is contingent upon the successful completion of a background and driving record investigation. As a federal contractor, our company is committed to maintaining a safe and drug-free workplace. Candidates for this position are required to complete a pre-employment drug screen successfully. The drug screening process will include testing for substances that may impair one's ability to perform the job safely and effectively. #LI-JR1

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Description Leidos is seeking a Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations: Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates. Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor’s in Civil, preferred, or Mechanical Engineering with two plus (2 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. November 20, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $57,850.00 - $104,575.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description Leidos is seeking a Senior Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Senior Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations: Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates. Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor’s in Civil, preferred, or Mechanical Engineering with four plus (4 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. November 20, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $72,150.00 - $130,425.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Job Description We are looking for a safety-first, analytical, and experienced electrician to join our team. You'll be assigned a variety of work orders, including fixing, replacing, installing, and maintaining, and testing electrical wiring, circuit breakers, transformers, and lighting fixtures in buildings. The ideal candidate is familiar with reading technical schematics and blueprints, has extensive knowledge of electrical systems and wiring, and has completed all training, apprenticeship, and licensing requirements. If this is you, apply today! Compensation: 20 -30 per hour Responsibilities: • Test newly installed electrical components to ensure proper function, • Ensure that the wiring meets all building codes and standards for safety, • Install wiring and other electrical components, and test to ensure it’s properly connected, • Execute maintenance and installation of electrical equipment for homes, offices, and factories, • Locate and correct electrical problems, including component installation and replacementQualifications:, • Physically able to lift up to 50 lbs, • Applicant must have a valid electrician license, • High school diploma or GED required, • Completed electrician apprenticeship, • Willing to work in confined spaces, at great heights, and in all types of weather conditionsAbout Company We are DM Electric, a small electrician business with over 25 years of experience. We are looking to grow! I'm looking for someone with experience. We are looking for candidates with experience at all different levels who can get the work done efficiently and in a timely manner. We offer overtime and weekend hours when needed and available.

Job Description JOB SUMMARY The Supplier Quality Engineer is responsible for ensuring supplier compliance with purchasing controls, qualification standards, and continuous monitoring requirements. This role involves collaboration with internal teams and suppliers to uphold regulatory standards, drive quality improvements, and mitigate risks in the supply chain. In addition to compliance tasks, continuous improvement initiatives are a key focus, ensuring that processes evolve to enhance efficiency and effectiveness. JOB RESPONSIBILITIES • Purchasing Controls Compliance: Maintain and oversee purchasing controls compliance, ensuring proper documentation of supplier performance and continuous monitoring files., • Supplier Qualification & Monitoring: Lead supplier qualification initiatives, assess ongoing performance, and ensure adherence to regulatory and company standards., • Training & Education: Provide education and training to company personnel and suppliers on purchasing control applications to sustain long-term compliance., • Product Development Support: Collaborate with engineering teams to guide supplier selection and documentation of requirements for new materials and components., • Regulatory Alignment: Ensure selected suppliers meet regulatory requirements, possess recognized credentials, and demonstrate competency for intended purchasing needs., • Supplier Performance & Corrective Actions: Manage and analyze supplier corrective action reports, monitor performance trends, and provide insights for site-level management reviews., • Supplier Audits: Conduct remote and onsite supplier audits to verify compliance, identify risks, and drive continuous improvement., • Continuous Improvement Initiatives: Engage in continuous improvement activities within the function and areas of responsibility. Beyond compliance, focus on enhancing processes, identifying opportunities for efficiency, and driving meaningful improvements., • Pre-Market Activities Collaboration: Work closely with Product Development teams to support pre-market activities, ensuring supplier selection, qualification, and documentation align with regulatory and business requirements. QUALIFICATIONS • Bachelor's degree in engineering, supply chain management, or a related field. Background in electronics/electrical engineering is preferred., • Experience in supplier quality management, auditing, and regulatory compliance., • Strong understanding of purchasing controls, supplier qualification processes, and corrective action management particularly with contract manufacturing., • Excellent communication, problem-solving, and analytical skills., • Ability to collaborate effectively with cross-functional teams and external suppliers., • ISO 13485 Certified Lead Auditor or CQA required SKILLS & ABILITIES • Excellent skills in written and verbal communication, and ability to interact with all levels of the organization and suppliers, • Superior organizational abilities and the ability to maintain deadlines., • Ability to take initiative, • Ability to build team relationships and interface in a multi-disciplinary environment, • Ability to translate technical requirements and specifications to external suppliers, • Working knowledge of software programs; Microsoft Word, PowerPoint, Excel, Project, • Position requires some travel, international and domestic (Up to 50%)

Job Description POSITION SUMMARY: The MEP department is seeking an Electrical Engineer with 8+ years of relevant experience in electrical power, lighting and fire alarm/systems design for educational, commercial and industrial facilities to expand its growing MEP division. PRIMARY DUTIES: • Prepare electrical design for large scale projects-industrial, institutional, office, retail, healthcare and other, • Apply design knowledge in power distribution, grounding, lighting, control systems, and equipment specifications and selections, • Analyze complex engineering problems and offer effective resolutions, • Ability to direct a team of designers and support personnel, • Interact with all engineering disciplines, construction project managers, and clients, • Lead an electrical design group on large scale projects, • Work within company policy and OSHA Safety rules, • Must have advanced knowledge of electrical engineering and design and be familiar with applicable codes for building, energy, and construction standards and acceptable industry practices, • Must be able to travel up to 10% of the time, • 10+ years of formal experience in electrical system design for buildings, • Experience with Engineering Design software including SKM, • Experience with Lighting Design and Photometric Software, • Experience with latest versions of AutoCAD, • Must have experience as a project lead on complex, multi-discipline engineering design projects., • Strong verbal and written communication skills required with the ability to prepare written specifications, letters, reports and related contract documents. EDUCATION/EXPERIENCE: • Must possess Bachelor or Master’s degree in electrical engineering CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Position Overview: We are proud to support our nation's Veterans by offering career opportunities that value military training, discipline, and technical expertise. As a Diesel Technician, you will leverage the skills acquired during your military service to diagnose, repair, and maintain diesel engines and heavy-duty vehicles. This position is exclusively for U.S. Military Veterans who have received an Honorable Discharge. Key Responsibilities: • Perform routine maintenance and inspections on diesel engines and heavy-duty vehicles., • Diagnose mechanical, electrical, and hydraulic issues using diagnostic tools and technical manuals., • Conduct engine rebuilds, component overhauls, and part replacements with precision., • Interpret work orders and technical documentation to determine repair procedures., • Maintain accurate service records and ensure documentation complies with company and regulatory standards., • Utilize military-level discipline and attention to detail in every repair or service task., • Adhere to all OSHA and company safety procedures., • Collaborate with team members to ensure efficient workflow and maintain high operational readiness. Requirements: • Must be a U.S. Military Veteran with an Honorable Discharge (documentation required)., • Proven experience working on diesel engines during military service (e.g., tanks, tactical vehicles, generators, transport trucks)., • Ability to read and interpret service manuals, schematics, and technical bulletins., • Familiarity with hand tools, power tools, and diagnostic equipment., • Strong problem-solving and mechanical aptitude., • Physical ability to lift heavy objects, stand for extended periods, and work in various environments., • MOS/Rating background in mechanical fields such as (but NOT limited to):, • 91B (Wheeled Vehicle Mechanic – Army), • 3521 (Organizational Automotive Mechanic – USMC), • CM (Construction Mechanic – Navy), • 2T3X1 (Vehicle Maintenance – Air Force), • Diesel or automotive technician certifications (ASE, OEM-specific, etc.)., • Experience with military or civilian fleet maintenance operations. Why Join Us? • Veteran-friendly workplace culture, • Competitive pay and comprehensive benefits, • Continued training and advancement opportunities, • Transition support and mentorship from fellow Veterans, • A mission-driven environment where your service is respected and valued

Job DescriptionDescription: Scope of Work (Tasks/Responsibilities): • Attend meetings on-site, in-person., • Develop and write technical requirements (i.e., Statements of Work, specifications, drawings, sketches) for building and facility-system repair projects., • Develop and write technical requirements (i.e., Statements of Work, specifications, drawings, sketches) for building and facility-system multi-year preventive maintenance and repair contracts., • Prepare cost estimates for building and facility system repair projects and multi-year preventive maintenance and repair contracts; provide technical pricing input and recommendations., • Perform field investigations and evaluations of buildings and facility systems., • Observe, investigate, and document site, building, and equipment conditions., • Execute field-logistical coordination., • Perform and document daily on-site, in-the-field inspections of ongoing repair projects and facility-service activities., • Provide general safety and quality assurance review and oversight., • Provide and review short-range (2-to-3-week look-ahead) scheduling., • Schedule technical and drawing reviews among customers and stakeholders., • Perform submittal reviews and provide written comments., • Coordinate facility-system outages (e.g., HVAC, electrical, fire-alarm, testing, etc.), • Provide building-access support., • Provide laydown coordination for project materials., • Provide site-visit support., • Provide regular written and oral updates on project status to team members., • Candidate must be familiar with repair, maintenance, and operation of commercial or industrial buildings, facility systems, and equipment such as electrical, structural, civil, mechanical, HVAC, elevators, and fire protection., • Five years of experience with commercial or industrial building and facility-related repair, maintenance, and construction contracts. Specifically, the candidate must be able to read and understand a contract, contract drawings, and contract specifications (as it pertains to their duties) and be able to verify work is completed in accordance with the contract documents., • Technical School Diploma preferred., • High school diploma with additional work experience acceptable. Requirements:

Job Description Position Summary We are seeking a Senior Electrical Engineer (PE) with 6+ years of experience designing electrical power, lighting, and fire alarm/systems for a wide range of building types. This role plays a key part in delivering high-quality engineering solutions for commercial, educational, healthcare, industrial, and institutional facilities. The ideal candidate brings strong technical expertise, the ability to lead multidisciplinary design efforts, and a commitment to creating efficient, code-compliant electrical systems. Primary Responsibilities * Develop electrical system designs for medium to large-scale building projects, including load calculations, layout, equipment selection, and system coordination. * Apply advanced knowledge of power distribution, grounding, lighting systems, controls, and fire/life safety systems. * Analyze complex engineering challenges and provide practical, technically sound solutions. * Coordinate closely with architects, mechanical engineers, structural engineers, and construction project managers throughout the project lifecycle. * Review design deliverables for accuracy and compliance with applicable codes and standards. * Prepare drawings, technical documentation, and specifications using industry-standard design tools. * Participate in project meetings and client discussions, offering technical guidance as needed. * Perform job duties in accordance with safety regulations and internal policies. * Complete additional engineering tasks as assigned. Knowledge, Skills & Abilities * Deep knowledge of electrical engineering principles and applicable building, energy, and electrical codes. * Experience leading electrical design components on complex, multi-discipline building projects. * Proficiency with electrical engineering software such as SKM, lighting and photometric design programs, and current versions of AutoCAD. * Strong communication skills, including the ability to prepare reports, specifications, design narratives, and professional correspondence. * Ability to work collaboratively within a team and manage multiple tasks with minimal oversight. * Capable of occasional travel (up to 10%) for site visits or project coordination. Education & Experience * Bachelor’s or Master’s degree in Electrical Engineering. * Minimum of 6 years of electrical building systems design experience. Licensure * Active Professional Engineer (PE) license is required. Work Environment & Physical Requirements * Role involves both office and occasional field work, including exposure to outdoor conditions during site visits. * Frequent computer-based work is required. * Must be able to occasionally lift up to 25 pounds.

Job DescriptionASR International Corporation has an available opportunity supporting the Naval Surface Warfare Center Philadelphia Division (NSWCPD) as a Logistician. The Logistician will provide support and interface with the ASR contractor team supporting NSWCPD. This entity is responsible for research and development, test and evaluation, engineering and fleet support organization for the Navy’s ships, submarines, military watercraft and unmanned vehicles. This requirement is for NSWCPD Code 314, which is responsible for maintaining and updating Technical Manuals (TMs) for Hull, Mechanical, and Electrical (HM&E) equipment onboard U.S. Navy ships. Code 314 is responsible for delivering Technical Manual support for all systems and equipment under NSWCPD delegated technical authority. The effort encompasses assisting NSWCPD in providing Program Support, Tech Manual Development, Maintenance, and Management. Location: Philadelphia, PA 19112, and minimal travel. Job Description/Job Tasks & Responsibilities: • Provide Acquisition TM Program Support including performing technical and format compliance reviews of Technical Manuals as well as performing ship checks as requested by NSWCPD Code 314 to validate systems and equipment onboard Navy ships., • Assist the Government in the development of logistics program status reports for delivery to sponsors. Program status reports include producing and maintaining monthly status updates per program., • Prepare briefs and programmatic materials in support of quarterly Product Support Management Team (PSMT) meetings., • Provide a weekly Ship Building Technical Manual Status Report and Change Login accordance with CDRLs, • Provide support in delivering lifecycle Tech Manual support and products for all systems and equipment under NSWCPD delegated technical authority., • Assist NSWCPD in providing Tech Manual Development, Maintenance, and Management., • Provide Acquisition TM Support, develop, update, and maintain TM, and respond to feedback., • Efforts IAW Standard NAVSEA Integrated Publishing Process (SNIPP) and NAVLOGTD system, modifying hosted SGML/XML files as required, and utilization of compatible version of ArborText., • Provide accurate TM Hull Applicability, develop Signal Flow Diagrams (SFDs), and provide support utilizing Advance Technical Information Support (ATIS)., • Provide support of Code 314 in delivering Lifecycle Tech Manuals. Support encompasses Continental United States (CONUS) locations., • Provide support as part of a multifaceted ASR contractor team supporting both onsite USN government and at contractor site locations., • Coordinates with ASR team, provider, customer, and user and continuous interfaces with the NSWCPD technical community (ISEA/Trainers/Engineers/OEMs/vendors)., • Security Clearance Requirements: Candidate will require Active DOD Secret Clearance., • Must be a US Citizen., • Education: High school diploma, trade, industrial school, or GED equivalent., • Five years experience developing, modifying, and reviewing Naval shipboard technical documentation and materials and integrated logistical system (ILS) elements (Tech Manuals, Preventative Maintenance System (PMS), Provisioning, and Operating Procedures) Experience in engineering and logistic projects involving development and maintenance of HM&E logistics technical data., • Knowledge of DoD/Navy/NSWCPD Tech Manual, Integrated Logistics Support (ILS) plans and processes., • Ability to communicate effectively with Navy customer and contractor personnel at all levels., • High comfort level working with and around all military/organizational levels, clients, suppliers, and visitors., • Proficiency in Microsoft Office, especially Excel, Word, Outlook, and PowerPoint., • Occasional travel as needed. About ASR International ASR provides world-wide Management and Technical Support Services to Government agencies and Fortune 500 customers. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide. Benefits Hired applicants may be eligible for benefits, including but not limited to, an excellent compensation package and comprehensive benefits package which include a flexible work schedule, Paid Holidays, Paid Time Off and Sick Days, Health Insurance (medical, dental and vision); and a 401(k) plan. The salary range provided for this role is a good faith estimate representative of all experience levels. ASR considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. This job description is intended to describe the general nature and level of work performed by people assigned to this job description. The job description is not intended to be an exhaustive list of responsibilities, duties and skills required for this position. Please note that your resume and candidacy may be subject to customer approval, acceptance and clearing of the required background check and successfully obtaining and maintaining any required security clearances, if any. ASR is committed to the policy of equal employment opportunity. In order to provide equal employment and advancement opportunities to all individuals, employment and promotion decisions at ASR are based on merit, qualifications, and abilities. ASR’s hiring and employment practices are not influenced or affected by an applicant’s or employee’s race, color, religion, sex, national origin, age, veteran status, marital status, ancestry, ethnicity, physical or mental handicap / disability which is unrelated to job performance, sexual orientation or any other characteristic / classification protected by law. Powered by JazzHR G8a4KE7wIH

Job Description This person can sit anywhere out of the Northeast and will spend 80% of the time traveling to customer sites to do repairs on robots. When you are not traveling, you will get to work remotely from home. Must Haves: · Previous experience with FANUC robot troubleshooting and maintenance · Ability to interpret electrical, mechanical, and pneumatic prints and related technical documentation · Experience with preventative maintenance on robots or heavy machinery · Able to work at customer sites with little direct supervision · Comfortable with heavy travel (up to 80% travel), overtime work, and 2nd and 3rd shift when needed on assignments · Ability to read and interpret PLC ladder logic a plus Responsibilities: Troubleshooting, repair and maintenance of FANUC Robots and controllers, electrical control devices, and peripheral equipment · Provide telephone-based troubleshooting through the Hotline to support customer’s in resolving FANUC America or related peripheral equipment operational problems · Documenting FANUC products and related peripheral equipment performance and failure modes · Completion of a Service Report for each customer call

Job Description T&M Associates is seeking a highly motivated Group Manager to lead and expand our Mechanical, Electrical, and Plumbing (MEP) Practice in the Midwest Region. This position is based in our Columbus, OH office and offers a hybrid work arrangement, combining remote work with in-office collaboration The Group Manager will play a key leadership role in managing team operations, ensuring project excellence, and supporting strategic business growth. With support from our local disciplines and a well-established MEP Practice in other regions, this individual will be instrumental in strengthening client relationships and driving new opportunities across both public and private sectors. Key Responsibilities: • Lead, mentor, and manage a team of mechanical, electrical, plumbing, and fire protection engineers., • Oversee day-to-day team operations to ensure high-quality, timely project delivery., • Supervise design and construction administration tasks across disciplines., • Serve as the primary liaison between clients and internal project teams., • Participate in strategic business planning and assist with project selection., • Drive continuous improvement in technical execution and team processes., • Ensure all work complies with applicable codes, standards, and industry best practices., • Monitor group performance against departmental KPIs and support overall business goals., • Foster and maintain client relationships to support ongoing and future business., • Identify and pursue new business development and acquisition opportunities., • Bachelor’s Degree in Mechanical Engineering or a related field is required., • 10+ years of experience in mechanical engineering, including MEP/facilities design., • Professional Engineer (P.E.) license preferred, • Proven project management and team leadership experience., • Strong understanding of industry codes, standards, and compliance., • Proficient in AutoCAD and Revit; hands-on design experience preferred. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description If you want your time, energy, talent, enthusiasm and personal passion for the wonders of flight to matter and result in meaningful improvements to our aviation system, then you belong on the C&S team! We want the chance to meet the best and brightest talent in the industry and add to our team as our aviation practice continues to soar to new heights. Check us out…. let’s see what we can do together! Aviation Resident Project Representative II/III C&S Companies is currently seeking an Aviation Resident Project Representative II/III position serving our Philadelphia office and national clients. This is a full-time position offering competitive compensation, great employee benefits and an outstanding work environment. Relocation assistance available for qualified candidates. This position is diversified with opportunities to work at both general aviation and larger commercial service airports, and will allow you to interact with our aviation customers. The position will require travel to airports primarily across New Jersey, Pennsylvania, Delaware, New York as well as across our national locations. Heavy potential for travel across the US to work with other C&S offices during the heavy workload months and winter construction months. Airport site and building construction experience highly desired. Responsibilities include performing routine construction inspection services including acting as a liaison between supervisor and contractor, arranging material testing, conducting hands-on inspections, notifying supervisor of problems and deviations from plans and specifications, tracking quantities for payment, and completing daily reports. Required Knowledge/Skills/Abilities for RPR II • Five years of related experience, • Associates degree in related field, • Ability to maintain a daily job log and records, • Ability to identify non-compliance items and proper procedures for correction. Effective organizational and computer skills, including the use of MS Office products, Bluebeam, and e-Construction applications., • Ability to travel for short and long term assignments., • Airport construction experience (horizontal projects) highly desired, • Bachelor’s degree in related field, • Concrete and asphalt pavement inspection experience, • Ability to travel for short and long term assignments, • Vertical construction experience a positive, • Seven - ten years of related experience, • Airport construction experience (horizontal projects), • Ability to travel for short and long term assignments, • Associates degree in related field, • Concrete and asphalt pavement inspection experience, • Ability to maintain a daily job log and records, • Ability to identify non-compliance items and proper procedures for correction. Effective organizational and computer skills, including the use of MS Office products, Bluebeam, and e-Construction applications., • Underground drainage, utilities and electrical experience, • Ability to mentor and coach teammates *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Electrical Estimator Summary: FindTalent is seeking a skilled Electrical Estimator to join a dynamic team within the construction industry. This role involves analyzing project proposals, conducting detailed cost assessments, and ensuring accurate estimates for electrical projects. The ideal candidate will have a strong technical background, excellent analytical skills, and the ability to work collaboratively to meet project and business objectives. Benefits: * Competitive compensation package * Paid time off * Comprehensive healthcare plan including medical, dental, and vision coverage * Health Savings Account (HSA) with company contributions * 401(k) retirement plan with company match * Profit-sharing opportunities * Accident and critical illness insurance * Student loan repayment and 529 college savings program * Company-paid life and AD&D insurance * Short-term and long-term disability insurance * Identity theft protection * Employee assistance program Responsibilities: * Review project scope, plans, and specifications to develop comprehensive labor, equipment, material, and subcontractor cost estimates. * Coordinate with subcontractors and external vendors to ensure accurate and competitive pricing for bids. * Develop and manage detailed estimate proposals, including various contract formats such as stipulated price, design-build, and construction/project management. * Present proposals to potential clients, ensuring alignment with their needs and project objectives. * Collaborate with project management teams to ensure seamless execution of awarded projects. * Generate accurate budgets from conceptual and schematic design phases through final estimates. * Provide support for field personnel by addressing concerns, offering documentation, and facilitating necessary project adjustments. * Maintain and update project cost data, unit pricing, and job tracking to ensure financial accuracy and efficiency. * Build and sustain strong relationships with suppliers, subcontractors, and clients for continued project success. Qualifications: * Bachelor's degree in Electrical Engineering, Construction Management, or a related field (or equivalent experience in substation and industrial electrical work). * Minimum of 3 years of experience in electrical estimating within the construction, industrial, or utility contracting sector. * Proficiency in MS Office and industry-specific estimating software (experience with Bluebeam, HCSS Heavy Job, Primavera, and MS Project preferred). * Strong analytical skills with the ability to interpret data, evaluate costs, and develop accurate estimates. * Ability to comprehend and apply technical writing related to electrical work, government contracts, and construction specifications. * Experience reviewing, editing, and creating contracts and project proposals. * Strong attention to detail, problem-solving skills, and ability to anticipate potential challenges. * Familiarity with union agreements and regional industrial networks is preferred. * Excellent communication skills with the ability to present estimates professionally and collaborate with diverse stakeholders. * Ability to manage multiple projects simultaneously while maintaining accuracy and thoroughness. FindTalent is committed to fostering a diverse and inclusive work environment. We encourage all qualified candidates to apply and are dedicated to providing reasonable accommodations throughout the hiring process.

Job Description Sigma Defense is seeking a multi-faceted Senior Software Engineer to design, develop, test, deploy, maintain, and improve software systems. In addition, the Senior Software Engineer will manage project priorities, deadlines, and deliverables. They will provide support on various projects, so the ability to adapt and prioritize projects is essential. The senior engineer will be an integral and important part of the team and the projects they will support. The ideal candidate is capable of working independently or collaboratively on complex software solutions that satisfy project goals and customer needs. This includes both software development and integrating software with system hardware to provide needed capabilities and features. The ideal candidate's ability to learn about and apply radar principles is a key factor in successfully meeting our customer commitments. Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Requirements • 6-8 years of related software development experience., • Experience working with Embedded and or Real Time systems, specifically DoD sensor equipment., • Experience working in Linux and Windows environments., • Experience integrating software and hardware real-time systems., • Experience developing, integrating, and testing Radar Systems is preferred., • Experience with object-oriented design and multi-threading/multi-processing is preferred., • Strong mathematical background., • Strong analytical skills., • Experience working with the following is preferred: QT Creator, Visual Studio, Git, GitLab, GitHub, Google Test, CxxTest, xUnit, CMake., • Experience with C/C++, Linux, Windows, and C#., • Candidate must possess or have the ability to obtain an active Secret security clearance or higher., • Bachelor’s degree from an accredited college or university in Software Engineering, Computer Science, Computer Engineering, Electrical Engineering, or related field of study., • Due to the nature of the work, all activity is 100% onsite., • Design, develop, test, deploy, maintain, and improve software systems for advanced radar and threat simulator systems., • Ensure the software meets the high standards required for DoD and other U.S. Government agencies., • Manage project priorities, deadlines, and deliverables., • Effectively balance multiple projects and adapt to changing priorities to meet project goals and timelines., • Integrate hardware and software components, ensuring seamless operation of the overall system., • Collaborate with cross-functional teams to achieve system integration goals., • Maintain existing software systems by identifying areas for improvement, troubleshooting issues, and implementing solutions to enhance performance and reliability., • Provide support on various projects, working closely with other engineers, project managers, and stakeholders to ensure project success., • Foster a collaborative environment that encourages innovation and knowledge sharing., • Create and maintain comprehensive documentation for software systems ensuring compliance with DoD standards and regulations., • Stay current with emerging technologies and industry best practices., • Pursue continuous learning opportunities to enhance technical skills and knowledge, and apply new insights to improve software systems. Benefits • Dental and Vision Insurance, • Medical Insurance to Include HSA, FSA, and DFSA Plans, • Life and AD&D coverage, • Employee Assistance Program (EAP), • 401(k) Plan with Company Matching Contributions, • 160 Hours of Paid Time Off (PTO), • 12 (Floating) Holidays, • Educational Assistance, • Highly Competitive Salary

Job Description Who We Are: CSI International Inc, founded in 1989, provides integrated building services to clients in real estate, property management, pharmaceuticals, telecommunications, higher education, manufacturing, and insurance. Throughout CSI International Inc.’s constant growth and evolution, our primary goal – exceeding our clients’ expectations – has remained unchanged. Because of this, we enjoy an incomparable reputation for cost-effective solutions with responsive services with uncompromising quality. What you’ll be doing: The individual shall report directly to the Site Manager and will be required to perform various job functions as requested at the site. Requirements include preventive maintenance functions and the ability to learn additional skill sets related to HVAC and Electrical systems. Utilizes professional skills to interact with tenants. Building Engineer Duties and Responsibilities: • Wearappropriate personalprotective safety equipment andfollowsestablished safety practices and procedures according to OSHA standards., • Maintain and repair the building’s furnishings, structurefinishand fixtures; mechanical, electrical, plumbing, HVAC systems, and associated controls. Ability tomaintain, troubleshoot and repair commercial kitchen equipment and its related systems., • Make mechanical alterations and repairs to the HVAC equipment and controls, as well as all requests for service adjustments., • Install and repair plumbing fixtures, pipes,pumpsand drain cleaning., • Install and repairelectrical systems, equipment, devices, and circuits., • Operation of building MEPsystemand perform preventive maintenancetomechanical equipment., • Attend to tenant and building servicerequestincluding picture hanging, light bulbreplacementand other regular requests., • Participates in engineering meetings asrequired. Participates in customer visits if needed., • Strongpeopleskills in terms of cooperation, teamwork, self-motivation, self-learningand respect for others., • Other trades workas assigned by your manager. Building Engineer Requirements: • Basic knowledge of all building systems which include electrical, plumbing, HVAC, and building automation controls., • High school diploma or general education degree (GED)preferred, • Skilled in the use of hand and power tools., • Maintainssafeand clean work environment., • Ability to take apart machines, equipment, or devices to remove and replace defective parts., • Ability to read and understand mechanical, electrical, plumbing, and HVAC drawings., • Ability to read and interpret electrical schematics., • Overtime will berequiredfor certain situations., • Shift changes may be necessary to meet the needs of the client., • Ability to check blueprints, repair manuals, orpartscatalogs as necessary., • Ability to use common tools such as hammers, hoists, saws, drills, and wrenches., • Experience with precision measuring instruments or electronic testing devices., • Experience performing routine maintenance., • Strong organizational andfollow-upskills., • Ability to perform weekend duty responsibilities and respond to the building under certain circumstances., • Professional presentation and attitude., • Willingness to be flexiblein:assignments, priorities, shifts/depending on projects and production needs and weekend coverage., • Authorized to work in the U.S. – We Use E-Verify ***CSI International, Inc. is committed to fostering, cultivating, and preserving a culture of diversity and inclusion. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Our commitment extends beyond preventing discrimination and harassment; it’s about creating an environment where diverse backgrounds and perspectives are valued. We believe in the power of our people, the ideas they bring, and what we can accomplish together. ***Consistent with the Americans with Disabilities Act (ADA), all state & federal requirements, it is the policy of CSI International, Inc. to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. CSI International, Inc. also provides reasonable accommodations as required under the Pregnant Workers Fairness Act (PWFA) for limitations related to pregnancy, childbirth, or related medical conditions. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact the Recruitment Team at 813-425-1985. Sunday-Thursday 3:00PM - 11:00PM