Factory jobs in Tulsa, OklahomaCreate job alerts

Job DescriptionRuhrpumpen is an innovative and efficient pump technology company that offers highly-engineered and standard pumping solutions for the oil & gas, power generation, industrial, chemical and water markets. We are searching for an experienced Machine Operator to work in our Tulsa Factory. Position Summary The Machining/Balancing position is responsible for machining, trimming, and deburring impellers, as well as setting up, operating, and loading parts on a dynamic balance machine. This role ensures parts meet dimensional, quality, and balance specifications while maintaining a safe and organized work environment. The ideal candidate is mechanically inclined, safety focused, and able to work in a fast-paced production environment. Key Responsibilities Perform basic machining operations, including trimming, and deburring, of impellers. Interpret and work from engineering drawings, blueprints, specifications, and work instructions. Use precision measuring tools (micrometers, calipers, height gauges, etc.) to verify part dimensions and tolerances. Ensure all machined surfaces meet required quality and finish standards. Set up and operate the dynamic balancing machine for a variety of impellers. Properly load and secure parts into the balancing fixture following standard procedures. Identify imbalance conditions and make the required corrective actions (material removal, trim cuts, etc.). Document balance readings, adjustments, and final acceptance results per internal procedures. Troubleshoot basic balancing machine issues and communicate equipment needs to maintenance as required. Complete all required job travelers, inspection sheets, and balance reports accurately and on time. Follow internal quality procedures and report any nonconforming parts or process deviations. Support continuous improvement efforts related to machining, balancing, safety, and workflow efficiency. Qualifications 1+ years of experience as a operating basic manual machines, balancing technician, or related mechanical trade preferred. Proficiency with precision measurement tools and inspection methods. Good mechanical aptitude, attention to detail, and problem‑solving skills. Ability to work independently and as part of a team in a fast-paced environment. Preferred Qualifications Experience working with impellers, rotating equipment, or turbomachinery components. Previous experience operating Schenck or similar balance machines. Physical Requirements Ability to lift up to 50 lbs. Standing, bending, and handling components for extended periods. Ability to safely handle rotating parts and sharp edges. Powered by JazzHR zccdYFFAKe

Job Description Job Title: Picker – Reach Operator Location: Tulsa, OK Shifts: 1st Shift, Monday-Thursday, 5:00am - 3:30pm (Occasional mandatory OT on Fridays, 1-3x monthly) 3rd Shift, Sunday-Thursday, 8:00pm - 6:30am (Occasional mandatory OT on Fridays, 1-3x monthly) Pay: 1st Shift: $18/hr 3rd shift: $19/hr Position Summary: The Picker – Reach Operator will operate a reach forklift to pull products for kitting and staging, and load products onto trucks for delivery. The role requires strong attention to detail, the ability to follow job lists, and experience using RF scanners for product tracking. Key Responsibilities: • Operate a reach forklift to retrieve and move products to the appropriate staging areas., • Work closely with other team members to ensure products are prepared in a timely manner., • Use RF Scanner to track product movements and ensure inventory accuracy., • Must have Reach Forklift experience., • Comfortable using shipping/inventory software and RF scanners, • Ability to work independently and manage time effectively., • Ability to follow detailed job lists for parts readiness., • A strong focus on punctuality, common sense, and a positive attitude is essential. TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter. Please visit the Career Center on our website for some helpful resources to help in your job search, to build a resume, for interview tips and many job opportunities! High School Diploma Must have Reach Forklift experience. #HP TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter.Please visit theCareer Centeron our website for some helpful resources to help in your job search, to build a resume, for interview tips and many job opportunities! • Operate industrial trucks or tractors equipped to move materials around a warehouse, storage yard, factory, construction site, or similar location.

Data Engineer Location: Tulsa 74134 (Will consider relocation for the right candidate) Schedule: onsite 5 days a week Interview process: 2-3 rounds (1st virtual; 2nd onsite) Our client is a respected leader in the retail and consumer services industry, recognized for its commitment to operational excellence and data driven decision making. The organization invests heavily in modern cloud technologies to support large-scale operations and ensure reliable, high quality data across the enterprise. Team members enjoy a collaborative environment where innovation, continuous learning, and technical craftsmanship are valued. Summary The Intersect Group is seeking a Data Engineer who will design, build, and maintain the data pipelines and data models that power enterprise analytics, reporting, and operational insights. This role ensures that business users have access to trusted, well-structured data that supports strategic and day to day decision making. You will work across cloud and on premises environments, developing automated processes, optimizing data flows, and contributing to the stability and scalability of the organization’s data ecosystem. Needs: • 3–5+ years of experience in data engineering, ETL/ELT development, or cloud data integration., • Strong proficiency with Azure Data Factory, Databricks, T-SQL, and Python; experience with PySpark preferred., • Hands-on experience with SQL Server, Azure Synapse, DB2, and enterprise data warehousing concepts., • Background in building ETL processes using SSIS, Informatica Cloud, or similar tools., • Experience creating build and release pipelines for data projects using Azure DevOps, including SQL deployments, SSIS packages, and SSAS models., • Familiarity with data profiling, data governance principles, and master data management practices., • Strong analytical thinking, communication skills, and the ability to collaborate effectively in an Agile environment., • Commitment to continuous learning and staying current with emerging cloud and data engineering technologies. Duties: • Develop, enhance, and troubleshoot automated ETL/ELT pipelines using Azure Data Factory, Databricks, SSIS, and related tools., • Analyze and profile data from diverse sources to determine integration requirements and data quality considerations., • Build and maintain data transformation logic using T-SQL, Python, and PySpark within Azure and SQL Server environments., • Consolidate multiple data sources into unified, trusted datasets to support enterprise reporting, analytics, and master data initiatives., • Implement data quality monitoring, validation rules, and automated alerting processes., • Support production environments by diagnosing issues, identifying root causes, and implementing long term solutions., • Document processes, create internal support materials, and contribute to knowledge sharing across the team. Call to Action If you’re a data engineer who enjoys building scalable cloud-based solutions and contributing to a high impact data environment, we’d love to speak with you. Please apply today by sending your resume and contact information to The Intersect Group for immediate consideration.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Join Crusoe as a Mid-Career Manufacturing Engineer and play a key role in the optimization and support of our production facilities. While our design teams create the 3D models for modular integrated electronics buildings and power distribution equipment, you will focus on how these products are built. This role serves as the vital link between engineering design and the factory floor. You will be responsible for designing efficient plant layouts, driving throughput optimization, and providing daily production support to ensure we meet our manufacturing goals with safety and precision. You will participate actively in the product lifecycle, providing manufacturability feedback to design teams and implementing continuous improvements on the line. What You’ll Be Working On: * Plant Layout & Process Optimization: Design and update manufacturing floor layouts to optimize material flow, maximize space utilization, and ensure safe operator movements. * Throughput Optimization: Analyze production data and perform time studies to identify bottlenecks; implement process improvements to balance assembly lines and increase overall facility throughput. * Optimization & Metrics: Identify opportunities for improvements in First Pass Yield (FPY) and Overall Process Effectiveness (OPE). * Capacity Planning: Assist in calculating production capacity and resource requirements to support scaling operations for high-volume manufacturing. * DFMA & NPI: Participate in Design for Manufacturability and Assembly (DFMA) reviews, providing feedback from the factory floor to simplify assembly and drive cost reductions. * Work Instructions: Develop and maintain detailed Standard Operating Procedures (SOPs) and assembly instructions to ensure consistent quality across production teams. * Tooling & Fixturing: Identify, design, and procure manufacturing aids, jigs, and fixtures to improve ergonomics, safety, and efficiency. * Production Support & Quality: Resolve manufacturing issues in real-time and lead root cause analysis for defects or process deviations. * Continuous Improvement: Champion a culture of safety, quality, and efficiency enhancements across the manufacturing department. What You’ll Bring to the Team: * Education: Bachelor's degree in Manufacturing, Mechanical, Electrical, Industrial Engineering, or equivalent. * Experience: 3–5+ years of experience in a manufacturing engineering role, preferably within a complex assembly or electromechanical environment. * CAD Proficiency: Proficiency with 2D/3D CAD software (SolidWorks, SketchUp) for creating plant layouts and fixture designs. * Process Knowledge: Strong understanding of Lean Manufacturing principles (5S, Kaizen, Value Stream Mapping) and their application. * Materials & Assembly: Knowledge of metal fabrication, welding, and mechanical assembly processes. * Analytical Problem Solving: Ability to solve manufacturing problems utilizing a first principles approach and data-driven analysis. * Physical Requirements: Ability to lift up to 50 lbs and stand/walk for 8 hours or more daily to support floor operations. * Safety and Compliance: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Bonus Points: * Experience with Plant Simulation analysis to model workflow and throughput. * Green Belt or Black Belt Six Sigma certification. * Experience using Material Requirements Planning (ERP/MRP) software to manage BOMs and work orders. * A strong drive to identify and continually improve manufacturing processes. Benefits: * Competitive compensation and equity packages * Restricted Stock Units * Paid time off, paid holidays & leave of absence programs * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off * Global travel insurance & emergency assistance * Daily meals allowance * Additional perks & programs specific to location Compensation Range: Compensation will be paid in the range of up to $99,000 - $110,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job DescriptionAllient Inc. is in growth mode and currently seeking a Master Scheduler to join our team in Tulsa, Oklahoma! The Master Scheduler manages the daily factory Demand / Supply in support of achieving ERP schedules that meet customer requirements. This pivotal role will operate in an Enterprise Requirement Planning (ERP) system to ensure alignment of production schedule to support our end user. The successful candidate must be able to coordinate activities between numerous groups and clearly communicate priority needs and schedules, in addition to achieving performance and customer goals while following documented organizational processes. Apply now! Responsibilities: • Creates and maintains production schedules/changes, and coordinates program requirements to ensure a controlled flow of materials and services to meet customer MRP., • Plans and organizes production capacity using scheduling tools for maximum manufacturing efficiency., • Provides status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed., • Analyzes/reconciles data to ensure system integrity, • Coordinates cross-functional interdepartmental activity as needed (i.e. with quality assurance, manufacturing, purchasing, engineering, program managers operations, and logistics). Minimum Qualifications: • Bachelor's Degree in Engineering, Supply Chain, Industrial Management, Business or a related field, • Minimum of 5 years work experience in manufacturing, scheduling, and utilizing MRP, • Experience working in Enterprise Resource Planning (ERP) systems as well as capacity planning tools., • Experience working with Microsoft Office Suite Physical Demands: • The role is a mix of office-based and production floor activities., • Will be required to operate a computer, other office devices., • Occasionally will have to lift and/or transport items weighing between 10 and 30 pounds. Work Environment: • Predominately office environment with occasional exposure to the production floor., • If in a manufacturing facility, will be required to put on precautionary, protective wear such as safety glasses. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role Join Crusoe as an Early-Career Manufacturing Engineer and help build the foundation for our production facility optimization. While our design teams create the 3D models for modular integrated electronics buildings and power distribution equipment, you will focus on the practical application of how these products come to life. This role serves as a vital entry point between engineering design and the factory floor. You will assist in designing efficient plant layouts, support throughput optimization, and provide daily production support to ensure we meet our manufacturing goals with safety and precision. You will be an active participant in the product lifecycle, learning to provide manufacturability feedback and assisting with continuous improvement initiatives on the line. What You'll Be Working On * Plant Layout & Process Support: Assist in updating manufacturing floor layouts to improve material flow and ensure safe operator movements. * Throughput & Data Analysis: Help perform time studies and analyze production data to identify bottlenecks; assist in implementing process improvements to balance assembly lines. * Metrics Reporting: Support the tracking of key performance indicators, including First Pass Yield (FPY) and Overall Process Effectiveness (OPE). * DFMA Participation: Support Design for Manufacturability and Assembly (DFMA) reviews by documenting feedback from the factory floor to help simplify assembly. * Work Instructions: Develop and maintain detailed Standard Operating Procedures (SOPs) and assembly instructions to ensure consistent quality. * Tooling Assistance: Assist in the identification and design of manufacturing aids, jigs, and fixtures to improve ergonomics and safety. * Production Support: Help resolve real-time manufacturing issues and participate in root cause analysis for process deviations. What You'll Bring to the Team * Education: Bachelor’s degree in Manufacturing, Mechanical, Electrical, Industrial Engineering, or a related field. * Experience: 0–2 years of experience; internship or senior project experience in a manufacturing or electromechanical environment is highly preferred. * CAD Proficiency: Basic proficiency with 2D/3D CAD software (such as SolidWorks or SketchUp) for layout and fixture design. * Lean Foundational Knowledge: Academic or practical exposure to Lean Manufacturing principles (5S, Kaizen, etc.). * Technical Understanding: Familiarity with metal fabrication, welding, or mechanical assembly processes. * Problem Solving: A first-principles approach to solving technical problems and a desire to work with data-driven analysis. * Physical Requirements: Ability to lift up to 50 lbs and stand/walk for 8 hours or more daily to support floor operations. * Safety and Compliance: This is a safety-sensitive position; participation in a drug and alcohol program is required. Bonus Points * Exposure to Plant Simulation software or modeling tools. * EIT certification or foundational Six Sigma training (Green Belt). * Experience or coursework related to ERP/MRP software for managing BOMs. * A strong drive to learn and a proactive attitude toward improving manufacturing processes. Benefits: * Competitive compensation and equity packages * Restricted Stock Units * Paid time off, paid holidays & leave of absence programs * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off * Global travel insurance & emergency assistance * Daily meals allowance * Additional perks & programs specific to location Compensation Range Compensation will be paid in the range of up to $85,000 -$95,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Responsibilities A Body Shop Technician will repair or replace damaged body parts back to Pre-Accident Condition with factory and dealership specifications. Quality repair need to meet or exceed the original factory fit and finish. The end result should be an invisible repair. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Review each repair order, work order, and estimator’s notes to understand repairs needed prior to beginning work on the vehicle., • All repairs must be completed according to the documentation on the repair order or the supplement., • Knowledge of the manufacturer’s and technical repair process., • Ability to use frame and measuring equipment per vendor procedures., • Perform initial teardown of vehicle., • Identify parts for cut-in and edging., • Perform all repair procedures according to factory specifications and company policy. I-Car Standard., • Perform and sign-off on all quality check before sending vehicle to paint department., • Re-assemble painted vehicle and painted parts., • Perform a final quality check and review of work order prior to sending the vehicle to the detail department., • Work with apprentice or lesser skilled technicians in developing repair skills. Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally Basic Qualifications: • High school diploma or general education degree (GED)., • Three years’ body shop experience., • ICAR Welding Certificate., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. (CDL a plus!) Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader. RUSHINDTECH

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role Crusoe is seeking a skilled and strategic Technical Training Manager to lead our workforce development initiatives across multiple manufacturing facilities. This is a pivotal leadership role that will be responsible for managing a team of trainers, overseeing all technical training programs, and ensuring consistent, high-quality skill development from onboarding through advanced certifications. Your expertise will be crucial in ensuring our teams have the skills needed to produce our modular data centers and power distribution centers, while also building a culture of continuous learning and professional growth that helps combat workforce turnover. This is a full-time position. What You'll Be Working On * Team Leadership & Development: Manage, mentor, and guide a team of technical trainers located in different facilities. You will set performance goals, provide ongoing feedback, and foster professional development for your team. * Strategic Program Management: Design, implement, and oversee a comprehensive technical training strategy for the entire company. This includes creating a standardized curriculum, developing structured learning paths, and managing the training budget and resources. * Onboarding & Skill Development: Lead the development and execution of efficient onboarding programs for all new hires. Additionally, you will create and manage programs aimed at upskilling the existing workforce in areas such as electrical wiring, equipment operation, and quality control. * Content Creation & Standardization: Supervise the development of all training materials, including video tutorials, written manuals, and hands-on exercises, ensuring consistency and quality across all facilities. * Evaluation & Certification: Implement and manage a system for assessing employee competency through practical tests and certifications. You will be responsible for a company-wide certification program that recognizes employee achievements and supports internal mobility. * Collaboration & Leadership: Work closely with senior leadership, department managers, and engineers to identify company-wide skill gaps and align training programs with business objectives. * Performance Analysis: Use data and performance metrics to measure the effectiveness of all training programs, report on their impact on key business indicators like productivity, quality, and safety, and use this information to drive continuous improvement. What You'll Bring to the Team * Management Experience: Proven experience in a leadership or management role, with direct experience supervising a team. * Extensive Manufacturing & Training Experience: At least 7+ years of combined experience in a manufacturing environment and a dedicated training role. Experience with fabrication, electrical assembly, or a related field is essential. * Strategic Thinking: The ability to think beyond day-to-day training tasks and develop a scalable, long-term training strategy that supports company-wide growth. * Curriculum & Instructional Design: Experience designing and implementing comprehensive training curricula for a large and diverse workforce. * Strong Communication: Exceptional verbal and written communication skills with the ability to present to and influence both factory floor staff and senior leadership. * Problem-Solving: The ability to identify systemic training challenges and develop effective, data-driven solutions. * 25% travel: Work cross functionally with facilities to help with onboarding and documentation across locations. Bonus Points * Bachelor's degree in a relevant technical, engineering, or education field. * Professional certifications in training and development (e.g., CTT+). * Experience managing a multi-site training program. * Experience with Learning Management Systems (LMS) and e-learning content creation. Benefits * Competitive compensation * Restricted Stock Units * Paid time off & paid holidays * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off Compensation Compensation will be paid in the range of $102,000-125,000 + Bonus. Restricted Stock Units are included in all offers. Salary will be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description TULSA, OKLAHOMA - Forklift / Heavy Equipment Field Mechanics Technicians are needed. Please note that the wages posted for this Job are estimated salaries for similar positions. While we don't share our pay ranges online, our actual pay ranges are based on your current Skills, Knowledge, Experience, and Growth Potential. Take advantage of a career opportunity that offers industry-leading pay, including a generous sign-on bonus for qualified candidates. This is your opportunity to join a technician team with a nationally recognized Hyster -Yale Dealership. We provide factory training and certification programs, advancement opportunities, and a great work environment. Deep South Equipment currently has positions available for skilled forklift/heavy equipment field technicians with mechanical aptitude and industry experience to join their team in Tulsa, OK. Prior forklift, Heavy equipment, or automotive background will fit well in this position. Deep South Equipment is a factory-recognized Dealer of Distinction by Hyster -Yale Lift Truck Company. Work for the best and work on the best equipment. This is an exciting career where you will be able to take advantage of advancement opportunities as well as ongoing training in a professional work environment where you will be recognized and rewarded for a job well done. Some of the benefits of this opportunity are: • Competitive compensation and a benefits package including medical, dental, vision, 401K, 2 weeks of paid vacation, and uniforms., • Technician commission program- an opportunity to add more to your income by using your customer service skills and technical expertise to recommend and sell additional products and services to benefit the customer. Electrical experience on lift trucks or industrial equipment is a plus. A technical degree in a related field is preferred but not required. Summary: Diagnose and repair forklifts and material handling equipment. Essential Duties and Responsibilities: • Analyze and Diagnose (troubleshoot) equipment malfunctions or failures, • Repair or replace engines, transmissions, carburetors, final drives, steering, clutches, cross shafts, hydraulic components, including pump motors, valves, and all related components, electrical systems, and air systems., • Perform assigned tasks in a timely, accurate, and efficient manner., • Communicate in a courteous and effective manner with customers and/or co-workers., • Prepare required documentation accurately and timely, including work orders, parts lists, and time cards., • Must provide your own tools - large or specialty tools provided by the company., • Maintain a safe working environment and observe all safety laws, policies and rules

Job Description Responsibilities AM and PM shifts Available Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Applied Controls provides expert engineering design services, and complete systems integration by leveraging years of experience and diverse industry insight. We deliver comprehensive and innovative analytical system solutions that exceed our customers’ expectations. Applied Controls is a subsidiary of FloWorks International LLC, which is a privately held company located in Houston, Texas. Job Information The Project Engineer is responsible for designing safe, high-quality, and robust analyzer system integrations, as well as managing projects from initiation through closeout within a structured project management framework. This role serves as the primary point of contact for clients during project execution and coordinates the efforts of a multidisciplinary internal team. Key Responsibilities • Review detailed client specifications, estimates, drawings, process flow diagrams, and P&IDs to define and document technical scope requirements., • Identify project scope requirements and complete required project initiation activities to support effective project kickoffs., • Develop and manage project schedules and budgets to track progress and cost performance., • Prepare and deliver weekly project status reports., • Act as the primary point of contact for clients throughout the project lifecycle., • Design safe, cost-effective, and high-quality industrial analyzer systems for process and environmental applications in refinery, chemical, power, and cement facilities., • Collaborate with client and vendor technical resources, as well as internal subject matter experts, to develop and finalize system designs., • Perform required engineering calculations to support system design., • Complete electrical system designs and drawings, as required, in coordination with electrical subject matter experts, including power distribution, panel schedules, UPS protection, lighting, and controls., • Coordinate with Drafting personnel to produce complete and accurate system drawings., • Verify the accuracy and completeness of all information shown on system drawings., • Select appropriate equipment and components in accordance with client specifications and applicable industry standards., • Develop PLC ladder logic as required for system functionality., • Coordinate with Service personnel for PLC, HMI, VFD, controller, and analyzer programming and setup., • Develop and execute factory acceptance test procedures., • Provide project leadership and direction to internal teams, including Drafting, Purchasing, Manufacturing, Accounting, and Service, throughout the project lifecycle., • Lead or coordinate post-project lessons learned reviews to support continuous improvement., • Perform other duties as assigned. Qualifications: • Organizational skills and time management, • Effective communications skills both written and verbal for interface with Clients and co-workers, • Ability to multitask, use initiative, and sometimes work under pressure to achieve deadlines, • Motivation to contribute to and develop with the company as growth / diversification continues, • Ability to work in a team environment (Field Sales, Engineering, Customer Service, Accounting), • Effective computer skills: Microsoft Office Suite and other Company and discipline specific software applications, • Practical working knowledge of NEC, UL, and CSA standards., • Bachelor’s degree in Electrical Engineering, Chemical Engineering, or a related field., • Minimum of three (3) years of project engineering experience. Physical Demands • Frequently required to stand, • Frequently required to walk, • Continually required to sit, • Continually required to utilize hand and finger dexterity, • Occasionally balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually utilize visual acuity to read technical information and/or use a keyboard, • Occasionally required to lift/push/carry items up to 25 pounds, • Occasionally work near moving mechanical parts, • Occasionally exposure to outside weather conditions, • Occasionally loud noise (examples: shop tool noises, electric motors, moving mechanical equipment) The Perks of Working Here FloWorks offers a competitive benefits package designed to support your health, financial well-being, and work-life balance. Highlights include: • Medical, Dental & Vision Insurance with multiple plan options, • Company-paid Life and Disability Insurance, • 401(k) with company match, • Health Savings & Flexible Spending Accounts, • Supplemental coverage (Accident, Critical Illness, Hospital Indemnity), • Employee Assistance Program (includes 3 free counseling sessions), • Identity Theft Protection at discounted rates This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. Committed to fostering a culture where every individual is valued and empowered to contribute to shared success. FloWorks participates in the US Government’s E-Verify program.

Job Description Reports to: VP of Digital Technology Cooperates with: Software Development, Enterprise Platforms, Engineering, Sales, IT, Operations, Product Development Location: Tulsa, OK Primary Responsibility: Responsible for owning and advancing the organization's data ecosystem by designing, building, and maintaining scalable data solutions within Microsoft Fabric and Power BI. This role develops data pipelines, creates reliable data models, and delivers analytics-ready datasets that enable business intelligence and reporting across the organization. This role also partners with business stakeholders to define a data roadmap, improve data governance and quality, and identify opportunities to expand data-driven decision-making and analytics capabilities What You'll Do: • Own and manage the organization's data ecosystem within Microsoft Fabric and Power BI, • Design and maintain scalable data architecture including lake house structures, semantic models, and datasets, • Develop and maintain data pipelines for ingesting, transforming, and integrating data from multiple systems, • Build and optimize enterprise Power BI datasets and reports to support decision-making across the organization, • Develop and maintain data models that support consistent and reliable analytics, • Establish and maintain data governance, data quality, and documentation standards, • Create and maintain a long-term data roadmap aligned with organizational strategy and analytics maturity goals, • Identify opportunities to expand advanced analytics capabilities such as predictive analytics, self-service BI, and automated insights, • Partner with business leaders and stakeholders to understand data needs and prioritize analytics initiatives, • Ensure performance, scalability, and reliability of the data platform, • Implement best practices for data security, access controls, and compliance, • Support and enable self-service analytics across departments through standardized datasets and semantic models, • Understanding of Data Loss Prevention (DLP) policies and tools, including implementing and managing data protection controls within Microsoft Fabric, Power BI, and the broader Microsoft ecosystem, • Monitor and troubleshoot data pipelines, reports, and platform performance, • Bachelor's degree in Computer Science, Data Science, or a related field, or equivalent combination of education and experience., • 5+ years of experience in data engineering, analytics engineering, or business intelligence development, • 3+ years working with Microsoft data platforms such as Power BI, Azure, or Microsoft Fabric, • Microsoft Fabric expertise including Lakehouse architecture, Data Factory pipelines, notebooks, and semantic models, • Advanced Power BI development including data modeling, DAX, report optimization, and enterprise dataset management, • Strong SQL proficiency for querying, transformation, and performance optimization, • Data modeling expertise, including star schema, dimensional modeling, and semantic layer design, • Experience building and managing data pipelines for ingestion, transformation, and orchestration, • Understanding of modern data architectures, including data lakes, lake houses, and warehouse concepts, • Experience with ETL/ELT processes and data transformation frameworks, • Ability to design scalable data platforms that support enterprise analytics and reporting, • Design and enforce Data Loss Prevention (DLP) policies to safeguard sensitive data, ensure compliance with organizational standards, and prevent unauthorized data access or sharing across the data platform, • Experience implementing data governance and data quality practices, • Strong understanding of business intelligence concepts and KPI development, • Experience integrating data from multiple sources such as ERP, CRM, SaaS platforms, and operational systems, • Knowledge of data security and access management within Microsoft environments, • Strong analytical and problem-solving skills with the ability to translate business needs into technical solutions, • Experience with version control and development best practices, • Strong communication skills for working with business stakeholders and leadership What Sets You Apart: • Experience building or leading a data platform practice, team, or Center of Excellence from the ground up or through a significant growth phase., • Track record of end-to-end platform ownership: from architecture design through scaled adoption, including driving self-service BI adoption across non-technical business users., • Knowledge of environmental manufacturing processes and sustainability practices., • Experience working in a fast-paced, Agile environment., • Ability to manage multiple priorities and stakeholders effectively., • Experience coordinating with IT infrastructure, cybersecurity, and enterprise governance processes What We Offer: • Health, Dental & Vision Insurance, • Annual Bonus Program, • $350 Annual Wellness Credit, • Flexible Spending Account (FSA), • 401k with match up to 5%, • Life insurance, • Disability insurance, • 5 days of paid sick leave annually (prorated based on start date), • 15 days PTO annually (prorated based on start date) Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. Job Posted by ApplicantPro

Job DescriptionJob Summary We are looking for individuals who can think on their feet and communicate effectively to join our team! As a Service Advisor, you will primarily be responsible for initiating and processing requests for repair services, providing administrative support to the Service Department as well as keeping customers apprised of work progress. Benefits • Full time, • Health, Medical and Dental, • Paid time off and vacation, • Growth opportunities, • Employee vehicle purchase plans, • Family owned and operated, • Long term job security, • Flexible Work ScheduleResponsibilities, • Oversee service orders and flow of Drive Lane. Ensure that customers receive prompt, courteous, and effective service, • Take ownership of the customer's experience by carrying out those additional assignments that allow the dealership to leave a positive impression with the customer, • Provide concierge support for all owner inquiries, whether phone or in person, to assure the customer does not get mishandled, • Ensure the daily inventory of technicians' time is consistently sold to service customers, • Distribute work between technicians efficiently, • Answer technical questions about vehicle problems, warranties, services, and repairs, • Maintain Customer Success Index at or above company standards, • Assist in diagnosing vehicle problems; order parts and tools as necessary, • Oversee administration of warranty claims as well as training and supervising of service department, • Reinforces company policies and adheres to company standards, • Encourages compliance with applicable laws and regulations, • Organized and friendly personality, • Demonstrated ability to manage others, • Time management skills, • Fantastic communication skills with your customers, • Professional, well-groomed personal appearance, • Consistent record of service and sales success, • Strong record of positive customer satisfaction results, • Team oriented and self-motivated, • Able to work with little supervision, • Clean driving record and valid driver’s licenseCompany Blurb We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Why Manhattan? Manhattan Construction Company is a family of builders committed to developing teams who do the right thing for our projects, our clients, and each other. Every year, we celebrate team members who have been with the company for 10, 20, 30, and even 40-plus years. What is it about Manhattan that makes people stick around for decades? We offer large company benefits and professional development opportunities with the care and concern of a family-owned business. At Manhattan, you get: • Competitive pay and benefits., • A positive, friendly, and team-oriented workplace with caring leadership., • Professional development and leadership programs., • To work on exciting projects for your community., • Security and stability working for a financially strong company. If Manhattan sounds like the place for you, share your resume with us! POSITION SUMMARY: The Senior MEP Manager is responsible for field operations on the project(s) assigned in order to achieve timely and profitable completion of each project in regard to Mechanical and Electrical. The MEP Manager directly supervises MEP trades, including review of installation of systems in the field. This position must demonstrate strong leadership, organizational and time management skills, as well as strong communication and client service skills. MAJOR DUTIES & RESPONSIBILITIES: • All qualities/ responsibilities of a MEP Manager, plus:, • Define the acronym MOPS at its first use - Method Of Procedures, • Correspond and coordinate with Utility providers and Authorities Having Jurisdiction, • Visit manufacturers and be present for MEP equipment Factory and Site witness testing., • Train and mentor other MEP, • Lead the development of project-level programs, • Assist with the development of corporate-level best practices and initiatives, • Project-level leadership or engagement with the client and client SMEs, • Other duties as assigned JOB SKILLS & ABILITIES GUIDELINES: • Computer knowledge and efficiency, including Microsoft Office products, • Knowledge of Manhattan document control and scheduling software, • Strong written and verbal communication skills, • Basic math/accounting skills, • Functions effectively as part of a team, • Dependability, • Ability to understand and follow directions, • Time management skills and organizational skills, • Ability to read drawings and specifications, • BIM360 experience preferred, but not required, • Four years of Construction Science/Engineering degree or equivalent combination of education and experience, • You must be adaptable to all types of weather conditions and traverse and inspect all areas of a construction job site, including walking, climbing, reaching, bending, crawling, or stretching., • Ability to physically stand, bend, sit for long periods, and squat throughout the day., • Ability to repeat the same movements., • Ability to communicate effectively to participate fully in meetings, video conferences, and phone calls., • Ability to compose, send, and reply to emails and written correspondence., • Must be able to lift, pull, or move up to 50 pounds at a time., • Travel may be required occasionally, primarily in the metropolitan area but sometimes domestically (must have a valid Driver's License). Founded in 1896, Manhattan is a top-ranked national construction services firm that provides preconstruction, construction management, program management, general building, and design-build services. Manhattan's award-winning portfolio includes mission-critical, sports, healthcare, government, education, laboratory, aviation, transportation, convention, casino, and hospitality facilities. Manhattan is a: • 20-time Associated Builders and Contractors (ABC) Accredited Quality Contractor (AQC), • ABC 2019, 2020, 2021, 2022, and 2023 Top Performing Contractor, • Ten-time STEP Diamond Safety Award Winner, • 2017, 2021, and 2022 National Safety Pinnacle Award winner Attention All Third-Party Agencies, Headhunters, and Recruiters Manhattan Construction will not accept candidate submission by unsolicited third parties through this site or any company email address. All unsolicited candidates presented to Manhattan Construction will be considered the property of Manhattan Construction. Manhattan Construction will not be responsible for any fees associated with unsolicited candidates, nor will a contractual relationship be formed by the submission. Manhattan Construction will not be obligated and will not under any circumstances pay any fees to said third parties submitting candidates in this manner. Manhattan Construction only forms contracts with recruiters with whom we have an established business relationship and with whom we have in place a signed agreement. All contact with Manhattan Construction from third parties must be through our Human Resources Recruiting department. Outside recruiters are asked not to contact our hiring managers directly. Any contact made outside of the Manhattan Construction Human Resources Recruiting Department by a third party will cancel any future business relationships between the third party and Manhattan Construction.

Job DescriptionRuhrpumpen is an innovative and efficient pump technology company that offers highly-engineered and standard pumping solutions for the oil & gas, power generation, industrial, chemical and water markets. We are searching for an entry-level Assembler to work in our Tulsa Factory. Position Overview The entry-level Assembly position is a foundational manufacturing role designed to train, develop, and prepare employees for promotion into an experienced Pump Assembler. This role focuses on basic mechanical assembly, material preparation, equipment operation, and hands-on skill building under close supervision. The ideal candidate is mechanically inclined, safety-focused, and eager to learn advanced pump assembly skills through structured on-the-job training. Qualifications Mechanical aptitude or experience working with tools in manufacturing, automotive, maintenance, or similar environments preferred. Ability to learn and follow verbal and written work instructions. Willingness to train on forklifts, cranes, rigging, and precision measurement tools. Strong work ethic, reliability, and desire to grow into more advanced assembly roles. Physical Requirements Ability to lift up to 50 lbs safely. Frequent standing, bending, reaching, and manual assembly work. Ability to work in a fast-paced production environment with industrial machinery, noise, and fluids. Powered by JazzHR 72Mmp84vVV

Job DescriptionDescription: Summary/Objective: In this position, you will work as part of a team to install Piping, Tanks and Mechanical Systems that operate fueling facilities as well as provide backup emergency power. Examples include service stations, marinas, hospitals, airports and more. We provide on-site, classroom and factory training for the equipment we install. Essential Job Functions: • Possess a valid driver’s license and be able to safely operate a construction truck., • Ability to read a blueprint., • Basic math and mechanical skills., • Physically fit with the ability to climb a ladder and lift 50 lbs., • Assist with the job foreman shooting grades and paperwork, • Strong Safety Record, • Self-motivated, mature and responsible - able to work as part of a team, • The ability to operate small machinery such as a skid steer or backhoe is a plus, • Ability to work out of town from time to time, • High school diploma or GED required This job operates in an outdoor environment (construction site). Physical Demands: This role is primarily physical in nature. Position Type/Expected Hours of Work: This is a full-time position. Travel: • Minimal, local travel is expected for this position. As an Equal Employment Opportunity employer, it is Guardian Fueling Technologies’ policy to provide equal employment opportunity for all applicants and employees. Guardian Fueling Technologies does not unlawfully discriminate on the basis of race, national origin, sex, pregnancy, color, religion, age, physical or mental disability, legally-protected medical condition, veteran status, marital status, sexual orientation, or any other basis protected by state or federal laws. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. GFT is a Drug Free Workplace. We offer AMAZING benefits! 401K Match, Paid holidays, Paid Vacation and more.

There's a Place for You at Crawford Electric Supply. A career at Crawford Electric Supply is more than a job. You're investing in a brighter, more sustainable future together and joining a team that makes a real difference for our customers. Crawford Electric Supply offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building - you can find it here. We operate throughout the southeast region of the United States, and are part of the Sonepar group, the world's #1 electrical distributor with over 45,000 associates around the globe. Being "Powered by Difference" means we respect and value diverse perspectives.Crawford Electric Supply we offer a supportive culture and great benefits, and as part of the larger Sonepar group, we can offer exciting opportunities to grow your career. It's time to energize your future! Don't miss out on this electrifying opportunity - apply today! Stay connected with us - follow our journey, job openings, and latest news on ___ and ___. Position: Inside Sales Associate Location: Tulsa, OK About Crawford: If you are looking for a company who is committed to building a relationship with you, who encourages having fun at work, who is powered by difference, and who is passionate about your future, it's time to apply at Crawford Electric Supply. Known in the electrical distribution industry for being a great place to work and build a career, Crawford prides itself on being a business partner rather than just an electrical supplier to its customers. Everyday Crawford associates provide the best customer experience while at the same time offering the widest variety of electrical products on the market. For the past 30 years, Crawford has built a culture of growth, opportunity, innovative thinking, and stability for its employees by truly living up to the company motto of, "Whatever it Takes!" through our mindset competencies below: Adapt: Effectively embrace new situation and people Dare: Appropriately challenge the status quo Learn: Learn from others, from mistakes, and self-improve Responsibilities • Supports Outside Sales with customer orders., • Determines type of merchandise desired by becoming familiar with products sold and utilizing vendor catalogs and other reference materials., • Utilizes Eclipse program for pricing structure and order entry., • Estimates date of delivery based on knowledge of company delivery schedule., • Resolves customer order problems and complaints promptly., • Describes/demonstrates products using samples or catalogs showing features and benefits., • Sells and promotes branch and company-wide special promotions as directed. Qualifications • High school diploma or equivalent., • Six months or more of related experience., • Effective interpersonal communication skills., • Ability to perform math functions associated with the job such as addition, subtraction, multiplication and division in all units of measure, using whole numbers, common fractions and metric scales., • Ability to calculate amounts such as discounts, interest and commissions., • Ability to read and interpret documents such as technical or general business publications., • Basic computer skills including Microsoft Office products., • Basic electrical product knowledge. Environment Note: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Crawford is an equal opportunity employer Crawford is a subsidiary of Sonepar USA. What We Offer You We offer great family-friendly benefits to full-time associates: • Healthcare plans, • Dental & vision, • Paid time off, • Paid parental leave, • 401(k) retirement savings with company match, • Professional and personal development programs, • Opportunity to become a shareholder, • Employer-paid short- and long-term disability, • Employer-paid life insurance for spouse and dependents, • Robust wellness program, • Gym reimbursement, • Employee Assistance Program (EAP) We're proud to be a military-friendly company, and our many employee resource groups (ERGs) help you make connections and feel supported. Ready to join the fun? Apply today and become part of the Crawford Crew - where we work hard, laugh often, and always have a spark to share! Equal Employment Opportunity Statement Sonepar is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, or any other categories protected by federal, state or local law. Sonepar and our family of brands are committed to the full inclusion of all qualified individuals. In keeping with our commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if a reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please call 843-745-2420 or email ___. EEO is the Law Applicants and employees are protected under Federal law from discrimination. To learn more, ___. Pay Transparency Non-Discrimination Provision Sonepar follows Executive Order 11246, including the Pay Transparency Nondiscrimination Provision. To learn more, ___.

PRIMARY DUTIES & RESPONSIBILITIES • Under minimal direction of a supervisor, responsible for quality parts produced on various machines such as but not limited to CNC boring mill machines., • Responsible for set-up, operation and inspection of quality parts for conformance to requirements holding close tolerances and maximum efficiencies., • Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements., • Measures and marks dimensions and reference points on material or work pieces as a guide for machining., • Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls or control media as required to ensure quality of production. Reports all machine malfunctions to immediate supervisor., • Assists in the solution of complex plant operating problems and/or cost reduction projects., • Operates a forklift and lifting devices for movement of parts., • Communicates with supervisor, engineers, production control, quality and other shop personnel for assignments and to resolve machining or quality issues., • Responsible for keeping equipment and work area clean and orderly and perform basic preventative maintenance functions., • Responsible for the enforcement of all Company Health, Safety and Environmental rules., • Maintain a clean & organized work area; utilize safe work habits., • Perform other work-related tasks as assigned. EDUCATION & EXPERIENCE QUALIFICATIONS • 3-5 years' experience operating CNC HBM Machinist in a heavy manufacturing environment., • Fanuc Control Experience, • Knowledge and application of precision measuring instruments and the application of such instruments, to include but not limited to calipers, ID & OD micrometers, depth gages, indicators and scales., • Knowledge of various tool holders, cutting tools, boring bars, and inserts used on various machines., • Forklift experience. JOB REQUIREMENTS • Ability to pass a drug screen & background check., • Must be able to create your own set up., • Must be able to read drawings and specifications with an advanced understanding of geometric tolerancing and dimensions., • Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication., • Superior interpersonal and communication skills., • Ability to deal with problems involving a few concrete variables in standardized situations., • Able to work well in a team environment as well as self-directed when working independently., • Willingness to comply with all safety regulations and procedures., • Ability to adapt and be cross-trained to learn all job duties., • Ability to multitask in fast paced environment., • Factory environment with large range in temperature changes., • Ability to stand, walk, bend/stoop, push/pull and repetitive movement up to 12 hours daily. COMPETITIVE BENEFITS: (visit usbenefits.nov.com for more information about our benefits offerings) • 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest., • Competitive medical plans that are effective your date of hire. Visit usbenefits.nov.com/cost-for-coverage for more information., • FREE MDLIVE virtual visits (when enrolled in an NOV medical plan)., • FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician)., • FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees)., • All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals., • All regular full-time employees receive up to 11 paid holidays per year.

PRIMARY DUTIES & RESPONSIBILITIES • Under minimal direction of a supervisor, responsible for quality parts produced on various machines such as but not limited to CNC boring mill machines., • Responsible for set-up, operation and inspection of quality parts for conformance to requirements holding close tolerances and maximum efficiencies., • Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements., • Measures and marks dimensions and reference points on material or work pieces as a guide for machining., • Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls or control media as required to ensure quality of production. Reports all machine malfunctions to immediate supervisor., • Assists in the solution of complex plant operating problems and/or cost reduction projects., • Operates a forklift and lifting devices for movement of parts., • Communicates with supervisor, engineers, production control, quality and other shop personnel for assignments and to resolve machining or quality issues., • Responsible for keeping equipment and work area clean and orderly and perform basic preventative maintenance functions., • Responsible for the enforcement of all Company Health, Safety and Environmental rules., • Maintain a clean & organized work area; utilize safe work habits., • Perform other work-related tasks as assigned. EDUCATION & EXPERIENCE QUALIFICATIONS • 3-5 years' experience operating CNC HBM Machinist in a heavy manufacturing environment., • Fanuc Control Experience, • Knowledge and application of precision measuring instruments and the application of such instruments, to include but not limited to calipers, ID & OD micrometers, depth gages, indicators and scales., • Knowledge of various tool holders, cutting tools, boring bars, and inserts used on various machines., • Forklift experience. JOB REQUIREMENTS • Ability to pass a drug screen & background check., • Must be able to create your own set up., • Must be able to read drawings and specifications with an advanced understanding of geometric tolerancing and dimensions., • Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication., • Superior interpersonal and communication skills., • Ability to deal with problems involving a few concrete variables in standardized situations., • Able to work well in a team environment as well as self-directed when working independently., • Willingness to comply with all safety regulations and procedures., • Ability to adapt and be cross-trained to learn all job duties., • Ability to multitask in fast paced environment., • Factory environment with large range in temperature changes., • Ability to stand, walk, bend/stoop, push/pull and repetitive movement up to 12 hours daily. COMPETITIVE BENEFITS: (visit usbenefits.nov.com for more information about our benefits offerings) • 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest., • Competitive medical plans that are effective your date of hire. Visit usbenefits.nov.com/cost-for-coverage for more information., • FREE MDLIVE virtual visits (when enrolled in an NOV medical plan)., • FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician)., • FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees)., • All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals., • All regular full-time employees receive up to 11 paid holidays per year.

There's a Place for You at Crawford Electric Supply. A career at Crawford Electric Supply is more than a job. You're investing in a brighter, more sustainable future together and joining a team that makes a real difference for our customers. Crawford Electric Supply offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building - you can find it here. We operate throughout the southeast region of the United States, and are part of the Sonepar group, the world's #1 electrical distributor with over 45,000 associates around the globe. Being "Powered by Difference" means we respect and value diverse perspectives.Crawford Electric Supply we offer a supportive culture and great benefits, and as part of the larger Sonepar group, we can offer exciting opportunities to grow your career. It's time to energize your future! Don't miss out on this electrifying opportunity - apply today! Stay connected with us - follow our journey, job openings, and latest news on ___ and ___. Position: Warehouse Associate Location: About Crawford: If you are looking for a company who is committed to building a relationship with you, who encourages having fun at work, who is powered by difference, and who is passionate about your future, it's time to apply at Crawford Electric Supply. Known in the electrical distribution industry for being a great place to work and build a career, Crawford prides itself on being a business partner rather than just an electrical supplier to its customers. Everyday Crawford associates provide the best customer experience while at the same time offering the widest variety of electrical products on the market. For the past 30 years, Crawford has built a culture of growth, opportunity, innovative thinking, and stability for its employees by truly living up to the company motto of, "Whatever it Takes!" through our mindset competencies below: Adapt: Effectively embrace new situation and people Dare: Appropriately challenge the status quo Learn: Learn from others, from mistakes, and self-improve Responsibilities • Receive, verify and package product for shipping (shrink wrapping, boxing, labeling)., • Stage product for loading, • Load product onto truck, • Unload materials from truck, • Move materials to warehouse for storage, • Move waste to dumpsters, • Responsible for quality control. No damaged product is sent out. No damaged material is accepted in, • Operate within standard operating procedures (SOPs) and OSHA safety standards, • Operate Powered Industrial Trucks (PIT). Stand up, reach truck, order picker and sit-down propane forklift, • Complete daily logs for PIT, • Adhere to all Processes, • Clean and maintain work areas, • Other duties as assigned Qualifications • 2 + years or more related experience and/or training, • Reading, writing and arithmetic skills, • Punctual and excellent attendance, • High school diploma or equivalent, • PIT proficiency, reach truck, order picker, "sit down" propane. Current certification a plus, • Manual dexterity required for operating machinery and handling small parts, • Ability to lift to 30 pounds and walk, stand for long periods of time REASONS TO JOIN OUR TEAM: • Earning Potential:You can expect to earn a wage that is competitive and provides a reliable/steady paycheck., • Development:Associates who begin in our warehouse have grown and become active in other areas of the business such as leadership, operations, HR, and sales., • Benefits:Our full-time associates are eligible for a range of benefits including, health care, 401 (k) savings plan, dental, vision, paid time off, and lots more., • Engagement:Our warehouse environment is fast paced and keeps you actively engaged Environment • Long and varied hours required occasionally, • Ability to work mandatory physical inventory, • Ability to work in extreme hot or cold environment, • Ability to work in dusty conditions Note: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Crawford is an equal opportunity employer Crawford is a subsidiary of Sonepar USA. What We Offer You We offer great family-friendly benefits to full-time associates: • Healthcare plans, • Dental & vision, • Paid time off, • Paid parental leave, • 401(k) retirement savings with company match, • Professional and personal development programs, • Opportunity to become a shareholder, • Employer-paid short- and long-term disability, • Employer-paid life insurance for spouse and dependents, • Robust wellness program, • Gym reimbursement, • Employee Assistance Program (EAP) We're proud to be a military-friendly company, and our many employee resource groups (ERGs) help you make connections and feel supported. Ready to join the fun? Apply today and become part of the Crawford Crew - where we work hard, laugh often, and always have a spark to share! Equal Employment Opportunity Statement Sonepar is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, or any other categories protected by federal, state or local law. Sonepar and our family of brands are committed to the full inclusion of all qualified individuals. In keeping with our commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if a reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please call 843-745-2420 or email ___. EEO is the Law Applicants and employees are protected under Federal law from discrimination. To learn more, ___. Pay Transparency Non-Discrimination Provision Sonepar follows Executive Order 11246, including the Pay Transparency Nondiscrimination Provision. To learn more, ___.

Job Description We are seeking a dependable and client focused Mobile Automotive Technician to join our team. This role involves traveling to client locations to perform essential vehicle services, including Ford recall work, oil changes, and basic maintenance. This is an excellent opportunity for someone looking to grow their technical skills while working independently in a dynamic, on-the-road environment. Mobile Technicians will interact with the clients directly explaining problems and solutions in understandable terms while building trust and rapport with the clients. As a Mobile Technician you will ensure a high-quality service and client satisfaction. You'll work with advanced technology and tools while continuing to build on your expertise. Why Snell Motor Companies? • Ongoing Training: Stay ahead of the curve with factory-specific training and access to cutting-edge diagnostic tools., • Supportive Team: A friendly, collaborative atmosphere where your contributions are valued. Key Responsibilities: • Perform mobile automotive services such as oil changes, basic maintenance, and recall repairs (training provided for Ford recall work), • Travel to client locations and complete scheduled services efficiently and professionally, • Inspect vehicles and recommend additional services when appropriate, • Maintain accurate records of services performed, • Ensure all work meets quality and safety standards, • Deliver excellent customer service and represent the company in a professional manner, • Provide clear, professional communication with clients regarding vehicle issues, services, and repairs, • Collaborate with a dedicated team of technicians and service advisors to ensure timely, accurate, and efficient repairs, • Basic automotive knowledge or prior technician experience preferred (training provided), • Strong customer service and communication skills and the ability to explain technical issues to clients in a clear, concise manner, • Reliable, punctual, and self-motivated, • Detail-oriented with a commitment to high-quality work, • Valid driver’s license with a clean driving record, • Ability to work independently and manage time effectively, • High school diploma or equivalent, • Ability to pass pre-employment screenings (background check and drug test), • On-the-job training and skill development, • Opportunity for growth within the company, • Flexible, on-the-road work environment, • Competitive compensation, • A supportive team that values your expertise and commitment This role is perfect for someone who enjoys working with people, takes pride in their work, and values reliability and attention to detail. As a mobile technician, you will play a key role in delivering convenient, high-quality automotive services directly to clients. Apply today to join a growing team bringing automotive service directly to the client and drive your career forward with Snell Motor Companies! #IND1

Manufacturing Executions Systems Solution Architect Manager (iBase-t Solumina) We are a team of strategic advisors, architects, and implementers who drive business transformations. Our diverse talent energizes clients' business functions and technology to maximize value in Supply Chain enhancing their ability to fulfill their growth and efficiency ambitions. Imagine working with world-class supply network capabilities like Smart Factory, Strategy & Innovation, Supply Chain Responsiveness, Sourcing & Procurement, or Product Development & Operations! Are you ready to take your career to new heights? Join our US Supply Chain & Network Operations Offering, where you'll deliver transformational solutions using operational expertise, digital technologies, advanced analytics, and industry-specific hybrid solutions. Don't miss the chance to be part of a team that provides exceptional client value while advancing your professional journey. Apply now and become a vital part of our innovative and dynamic workforce! Recruiting for this role ends on 5/30/26. The team Our team helps clients transform their value chains into competitive advantages. We drive efficiency, improve flexibility, and increase responsiveness through proactive insights and decision-making. We advise, implement, and operate transformational solutions that bring world-class supply network and operational capabilities to our clients. We provide operational know-how, digital technologies, advanced analytics, and industry-specific hybrid solutions to deliver unprecedented client value. Additionally, we improve operations, product, and material flow across the breadth of the value chain and create greater supply network synergy and value. Roles and Responsibilities This role utilizes your deep understanding of the Manufacturing Execution System space. While below is a sample of the role, each unique project will provide you the opportunity to develop and grow your MES capabilities. * Conduct discussions with senior leaders on functional solution within MES * Lead discussions with business to understand needs and requirements, translating requirements into MES functionality, and collaborate with technical architects ensuring technically feasible and scalable technology application solutions * Perform high-level functional and technical architecture, analysis, research, and design for MES solutions * Deliver complex projects in a fast-paced, team environment * Promote and participate in forums for sharing expertise, strengthening Deloitte's collective knowledge, and helping to resolve clients' challenges * Collaborate on innovative solutions to bolster the future of the practice * Develop your knowledge of and gain project experience in MES's newest and future solutions Required Qualifications * 7+ years of Manufacturing Execution System (MES) experience. * 4+ years of experience implementing MES (iBase-t Solumina) technology application solutions - (solution design, install, configuration, setup, integration, and upgrades). * 5 years of experience conducting the following activities: Business requirements gathering, fit-gap analysis, functional process design, data mapping, developing functional and technical specification documentation, system configuration, system testing (INT,UAT) and solution delivery, customer support, process document creations and review, working with onsite and offshore delivery model. * Experience using analytics and metrics to assess Manufacturing Performance and identify and quantify improvement opportunities. * Experience Leading 2+ MES implementations and System Architecture. * Bachelor's Degree * Ability to travel up to 50%, based on the work you do and the clients and industries/sectors you serve. * Limited immigration sponsorship may be available. Preferred Qualifications * Bachelor's Degree in Operations Research, Industrial Engineering, Engineering Management, Business Analytics, Computer Science, or related fields with a concentration in operations or analytics. * Prior Consulting experience * 3+ years of experience working with the iBase-t Solumina platform. * Certification provided by software vendor * Experience presenting on complex topics in a clear, concise, and effective manner * Strong analytical skills, data mining knowledge, and proficiency in handling and processing large volumes of data. * Ability to identify key insights and critical thinking to prioritize and focus on the highest value opportunities or the biggest risks. * Ability to communicate technical, or software usage concepts to audiences with limited background / knowledge on the subject. * Ability to drive and work in cross-functional teams, distributed across locations and time zones and across multiple hierarchy levels. * Experience leading a project team in a project client environment. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Deloitte, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $130,800 - $241,000. You may also be eligible to participate in a discretionary annual incentive program, subject to the rules governing the program, whereby an award, if any, depends on various factors, including, without limitation, individual and organizational performance. Information for applicants with a need for accommodation - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or protected veteran status, or any other legally protected basis, in accordance with applicable law.

Job Description As a Service Technician, you’ll diagnose and repair luxury vehicles, ensuring high-quality service and customer satisfaction. You'll work with advanced technology and tools while continuing to build on your expertise. Why Snell Motor Companies? • Ongoing Training: Stay ahead of the curve with factory-specific training and access to cutting-edge diagnostic tools., • Supportive Team: A friendly, collaborative atmosphere where your contributions are valued., • Perform vehicle inspections, diagnostics, maintenance, and repairs to manufacturer standards., • Accurately document all work performed and recommended services on repair orders., • Use state-of-the-art diagnostic tools and equipment to identify issues and recommend solutions, • Provide clear, professional communication with customers regarding vehicle issues, services, and repairs, • Collaborate with a dedicated team of technicians and service advisors to ensure timely, accurate, and efficient repairs, • Maintain a clean and organized work environment, adhering to safety and company policies Qualifications: • Previous automotive technician experience required, • Knowledge of automotive systems, diagnostic tools, and repair procedures, • Ability to work with factory-level diagnostic tools and vehicle-specific software, • Excellent communication skills and the ability to explain technical issues to customers in a clear, concise manner, • A strong passion for high-end vehicles and a commitment to providing exceptional customer service, • High school diploma or equivalent, • Valid driver’s license and clean driving record, • Ability to pass pre-employment screenings (background check and drug test), • Competitive salary and performance-based incentives, • Career growth opportunities within a family-owned company, • Modern, well-equipped work environment with cutting-edge diagnostic tools, • A supportive team that values your expertise and commitment #IND1

Job Description Service Technician If you love diagnosing and repairing vehicles while maintaining a positive attitude, then let’s talk! We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership has to treat them right by paying them well and offering room for learning and advancement. Here, you’ll work alongside some of the best in the business and make great money while doing it. Job Responsibilities • Examine and diagnose vehicles, • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work in cooperation with shop foreman, • Provide labor estimates to service advisor, • Monitor repair time and update service advisor, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Assist in mentoring technician trainees, • Attend company and factory training, • Keep current with factory technical bulletins High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations • Operator Driver License Compensation is based on experience and commensurate with Fortune 500 companies. Benefits • Medical, Vision, and Dental Insurance, • Vacation Time, • Holiday and Sick Leave About Our Dealership Keystone Chevrolet is located in beautiful Sand Springs, OK, and is Tulsa’s Chevy dealer of choice, always going above and beyond to provide all of our friends in Northeast Oklahoma and beyond with the pleasant, personalized service they deserve. We treat our clients like family and are looking for talented candidates to join our organization. If this sounds appealing to you, please complete our application to determine your eligibility.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company car, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Savings bank, • Training & development, • Vision insurance About Guinco Service Founded in 1997, Guinco Service is a premier, family-owned appliance repair company. We are an exclusive Factory Certified Care provider for the Whirlpool Corporation family of brands (Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana). Our motto is "Let our family help yours," and that applies to our employees just as much as our customers. We provide a collaborative, supportive, and team-oriented setting where you can build a long-term career. Why Join the Guinco Family? Hear from our employees! Click Here We know that for a technician, the support team behind you is just as important as the tools in your hand. We have built a system designed to help you succeed: • Stop Chasing Parts: We perform in-office part pre-screens and pre-order parts for most calls before you ever arrive., • Fully Stocked Support: You are backed by a fully stocked warehouse with inventory supported by the nations two largest appliance parts distributors., • Paperless Workflow: We are 100% paperlessall service orders, technical data, and routing are handled electronically via company-issued iPads. Health & Wellness • Health, Dental, & Vision Insurance: 50% of premiums paid by the company for employees., • Health Savings Account (HSA): Includes company contributions., • Family Support: Paid Maternity & Paternity Leave., • Insurance: Company-Paid Life Insurance/AD&D, with voluntary Critical Illness, Accident, and Hospital Indemnity options., • Disability: Long Term Disability coverage.Financial & Future, • 401(k): Retirement plan with company match., • Time Off: Paid Time Off (PTO), Holiday Pay, and Bereavement Leave.Tools & Equipment, • Company Vehicle: Take-home vehicle provided., • Expenses Covered: Gas card and vehicle maintenance covered., • Tech: iPad and truck stock provided., • Uniforms: Company-provided.Key Responsibilities, • Diagnose & Repair: Accurately diagnose and repair residential home appliances (Refrigeration, Cooking, Cleaning, Laundry) to manufacturer standards., • Customer Service: Maintain a high level of customer satisfaction through effective communication and a professional demeanor., • Digital Management: Utilize a company-issued iPad to process repair records, reference technical information, collect payments, and issue receipts electronically., • Decision Making: Make timely, independent decisions regarding repairs while working within a supportive team structure., • Communication: Effectively communicate with customers, technical support, dispatch, routing, and management.Qualifications & Requirements, • Experience: 2+ years of experience as a Full Line Appliance Repair Technician (Refrigeration, Cooking, Cleaning, Laundry) is required., • Physical Ability: Capable of lifting or maneuvering 50 pounds and occasionally up to 125 pounds., • Screening: Willing to undergo a pre-employment drug screen, criminal background check, and drivers license check., • Attitude: Enthusiastic, reliable, and customer-service focused., • Technical Skills: Basic computer/tablet skills and strong mechanical aptitude.

Job Description HOLT Truck Centers is looking to hire a Bus Technician. HOLT views the service department as a vital part of the dealership, and a crucial way that it builds open, honest, trusting relationships with customers and other departments is essential to the dealership's success. The main objective of the Service Technician is to diagnose and repair vehicle components and systems for the Service Department. Accountabilities • Perform unsupervised work as outlined on major repair orders with efficiency and accuracy, in accordance with dealership and factory standards., • Complete major repairs within specified times, • Diagnosis, troubleshoot, and repair non-typical vehicle issues, • Engage with external manufacturers and warranty contacts to maximize reimbursement of services, • Examine assigned vehicle to determine if further safety or service work is required or recommended, • Consult with service advisor about status of the vehicle repairs, • Provide technical expertise and guidance to all level of technicians, • Participate in manufacturer-sponsored training programs, schools, and events and make recommendations for other technicians within the shop, • Document all work performed and recommended on a repair order using accepted language, • Document all required information for the successful completion of a warranty claim, • Road test vehicles for evaluation purposes specifically for noise, vibration, and harshness to determine needed actions, • Ensure the customer's vehicles are kept clean. Notify the service advisor immediately of anything that has happened to change the appearance or condition of the vehicle, • Maintain a safe and clean work environment and recommend improvements for shop safety, • Maintain and be accountable for all dealership-owned tools and manuals. Identify issues with specialty tools and communicate to management. Make recommendations for tool replacement and inventory control, • Operate shop equipment safely, report safety issues, and recommend maintenance and repairs immediately to management, • Possess the ability to lead in a team environment, • Understand, keep abreast of current with, and comply with all federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA, EPA, and so on. Capable of identifying and communicating issues with management, • Display work ethic it takes to ensure each job is done efficiently and completely, • Possess great time management and organizational skills, • Be able to drive a vehicle and determine road worthiness, • Must be able to pass a pre-employment drug screening and physical examination, • Must possess a current and valid driver's license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier, • Must be able to work in a fast-paced environment while providing a superior customer service experience, • DOT Inspection Experience, • Must be neat in appearance, punctual, and a team player, • Possess good communication skills, • Must be able to adjust to multiple demands and shifting priorities and be responsive and flexible to best serve the issue at hand, • ASE certifications, • Good organizational skills and strong attention to detail, • Working knowledge of International Truck / IC Bus and supplier product, • Be able to use the International Service Portal when required, • Working knowledge of standard diagnostic software, • Own a complete set of tools, • Bus Certifications Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Overview Group 1 Automotive is a fast-growing leader in automotive retail, and we are looking to add qualified AUTOMOTIVE TECHNICIAN/MECHANICS to our teams across Tulsa, OK. Our locations include South Pointe Chevrolet, South Pointe CJDR, South Pointe Honda and BMW of Tulsa. In addition to competitive pay, we offer our associates the following benefits: • Health, Dental, Vision, Life, and Disability insurance, • 401(k) plan with company match, • Paid Time-Off, • Employee Stock Purchase Plan, • Employee Vehicle Purchase Program, • Professional work environment with job training, provided equipment, and advancement opportunities, • Market-leading pay based on experience plus bonuses To learn more about our company, visit . Apply today or reference a qualified friend. Group 1 Automotive is an Equal Employment Opportunity employer and participates in E-Verify Responsibilities • Perform high-quality repairs efficiently and accurately, following dealership and factory standards, • Conduct comprehensive diagnostics, troubleshooting, and testing on automotive systems, • Maintain a clean, organized, and safe work area, • Road-test vehicles to verify successful repairs, • Adhere to all company safety policies and procedures, • Provide timely updates to service advisors on repair status and estimated completion times for customer communication, • Participate in ongoing training to stay current with evolving automotive technology Qualifications • Previous experience as an automotive technician/mechanic, • High school diploma or equivalent, • Valid driver license in the state that you will work and a good driving record, • National Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in different specialized areas such as brakes, electrical/electronic systems or engine performance preferred, • Excellent customer service skills, • Professional appearance and work ethic, • Must pass background check, MVR, and drug screening

Securitas - - Responsibilities: Actively monitor premises and patrol to maintain safety; Preserve order and enforce regulations and directives for client site pertaining to personnel, visitors, and the area; Provide customer service and information to clients' employees and customers; Maintain safe

GardaWorld - - Responsibilities: Welcome visitors, verify identity, and guide visitors; Manage access control; Perform regular patrols to identify potential risks; Inspect security equipment and report maintenance needs; Respond to incidents, provide first aid, and coordinate with emergency teams.

USA Government Jobs - - Responsibilities: Lead nationwide implementation of TSA security screening protocols across airports and facilities.

TSA - - Responsibilities: Secure airports, seaports, railroads, highways, and/or public transit systems; Safeguard transportation infrastructure and ensure freedom of movement for people and commerce; Protect America's transportation infrastructure.

GardaWorld - - Responsibilities: Customer service duties like welcoming, verifying identity, and guiding visitors; Manage access control; Perform regular patrols to identify potential risks; Inspect security equipment and report any maintenance needs; Respond to incidents, provide first aid, and co

Walden Security - - Responsibilities: Perform entrance control: Enforce the District's entry and identification system and operate security screening equipment.Perform roving patrol: Patrol court facilities and grounds.Perform stationary post assignments: Monitor CCTV, duress alarms, and security e

GardaWorld - - Responsibilities: Welcome visitors and verify identity; Manage access control; Perform regular patrols to identify potential risks; Inspect security equipment and report maintenance needs; Write incident reports and communicate security concerns.

Ascension - - Responsibilities: Protect the healing environment by proactively monitoring facilities and identifying potential threats before they impact staff or patient care.Resolve security incidents through thorough investigation and clear documentation, ensuring a safe and transparent record o

GardaWorld - - Responsibilities: Welcome and assist visitors and verify identity; Manage access control and perform patrols to identify risks; Inspect security equipment and report maintenance needs; Respond to incidents and coordinate with emergency teams; Write incident reports and communicate se

Allied Universal - JobID: 1540989 [Safety Officer / Security Guard] As a Security Officer at Allied Universal, you'll: Ensure the facility is provided with high quality security services to protect people and property; Report safety concerns, security breaches and unusual circumstances both verbally

GardaWorld - - Responsibilities: Observe, survey the area and provide reporting on activity at the assigned location; Monitor CCTV Cameras; Monitor alarm system; Conduct Indoor and Outdoor Foot Patrols; Provide Outdoor Auto Patrols.

Flexible hours are available! Able to work starting at 5:00 AM or until midnight if required, based on café hours and availability.Welcome to the DYNE Hospitality Group (Tropical Smoothie Café) online hiring process! We’re glad you’re here.Please start the questionnaire for this position, whic

GardaWorld - - Responsibilities: Monitor the premises to ensure security; Conduct patrols to spot any suspicious activity; Control access points and verify identities; Respond quickly to incidents or potential threats; Write detailed reports on events and incidents.

Andy Frain Services - - Responsibilities: Own our security operations by performing post orders and coordinating with customers and authorities.

GardaWorld - - Responsibilities: Monitor the premises to ensure security; Conduct patrols to spot any suspicious activity; Control access points and verify identities; Respond quickly to incidents or potential threats; Write detailed reports on events and incidents.

Nesco Resource - - Responsibilities: Operate Forklift Safely: Load, unload, and move materials efficiently.Support Production Flow: Stage raw materials and components to keep production lines moving.Shipping & Receiving: Assist with incoming and outgoing shipments, verifying accuracy.Maintain Inven

Boise Cascade - 9999 East 58th Street - Responsibilities: Receive, select, and load materials; Operate forklift safely and efficiently; Verify accuracy of orders after packaging and loading; Provide basic customer service to internal and external customers; Maintain clean working area.

Aerotek - - Responsibilities: Operate overhead cranes to move materials; Load and unload materials from racks and pallets; Measure materials accurately; Perform basic tasks like drilling, cleaning, and scrap removal.

Alro Steel - - Responsibilities: Fill and prepare material orders for shipment; Operate overhead cranes, forklifts, metal saws, shears, and lasers; Contribute to customer service mission in safe and efficient manner; Maintain safety and accuracy in order fulfillment; Participate in extensive upfron

UPS is seeking Warehouse Workers / Package Handlers to assist with sorting, loading, unloading, and processing packages in a fast-paced warehouse environment.Warehouse Workers are responsible for unloading packages from delivery trucks and trailers, sorting packages by destination using conveyor bel

The information below covers the role requirements, expected candidate experience, and accompanying qualifications.Flexible hours are available! Able to work starting at 5:00 AM or until midnight if required, based on café hours and availability.Welcome to the DYNE Hospitality Group (Tropical Smoot