Trabajos inspection en New York, New York - Page 8Crear alertas

Job DescriptionQuality Control Microbiology Analyst II, IIIAllendale, NJ QC Microbiology Analyst II The Quality Control Microbiology Analyst II serves as a support role to clinical and commercial production. Microbiology Analyst II will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. • Environmental monitoring in controlled environments; Non-viable particulate monitoring, Active viable air monitoring Personnel monitoring, Surface sampling, Passive air monitoring, • Equipment monitoring; Ensure equipment is in proper working conditions, Ensure all equipment is properly maintained/calibrated, Program equipment with proper workflows, Assist with routine laboratory testing, Plate reads and incubations, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP), • Writing/conducting investigations pertaining to environmental monitoring and testing, • Develop and train QC Microbiology Analyst I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 2-4 years of experience with environmental monitoring or within the biopharmaceutical industry., • GxP/GDP, Safety Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills., • Technical training ability., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company., • Must be able to handle the standard/moderate noise of the manufacturing facility., • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities.While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst III The Quality Control Microbiology Analyst III serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst III will coordinate data for batch release, participate in project/client meetings, and author/revise environmental monitoring procedures. Additionally, the QC Microbiology Analyst will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring., • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates data for batch release., • Participation in project/client meetings and communications, providing scientific and technical expertise., • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols., • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections., • Develop and train QC Microbiology Analyst II on relevant business processes., • Processing of purchase orders for outsourced testing and lab supplies., • Coordinates work orders.REQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • GxP/GDP Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, Microsoft Visio (preferred), Netsuite (preferred), Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityAll PositionsWorking Environment, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityPlease note these job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionWhy Join MMT? At MMT, you’ll be part of a dynamic team that values growth, innovation, and the pursuit of excellence. We offer a collaborative environment where your skills and dedication are recognized and rewarded. If you’re ready to make an impact and take the next step in your career, apply today! As a Manufacturing Engineer at MMT, you will play a pivotal role in ensuring seamless communication and operational efficiency across departments. This position will work directly with the Engineering Manager and collaborate closely with supply chain and manufacturing teams to optimize production processes, enhance quality control, and deliver superior products. Essential Functions: • Works with Engineering Manager to deliver business objectives, • Manage machine builds in conjunction with supply chain and manufacturing., • Analyze existing materials and methods of manufacture to evaluate the feasibility, cost, and operational efficiency., • Lead, coach, and train on Lean Mfg Tools like VSM, 6S, Visual Mgmt, Single piece flow, GEMBA, SMED, and others., • Assist in driving a culture of Safety and Efficiency, • Assist in costing of CI projects and impact on new and current products., • Work closely with design engineers to aid in Design for Manufacturing., • Work closely with Manufacturing and Quality Assurance to ensure product quality, • 4+ years of relevant manufacturing experience required., • 2+ years of Continuous Improvement/Lean experience. Six Sigma Black Belt required, • Bachelor’s in Mechanical Engineering, Manufacturing Engineering, or equivalent required, • Autodesk Inventor, AutoCAD, and/or SolidWorks a plus., • Knowledge and experience with manufacturing processes, materials, product and process design, • Must be able to read and interpret complex engineering drawings with in-depth understanding of geometrical dimensioning and tolerancing., • Experience in machine tool manufacturing a plus., • Experience with machining metal highly desired including experience with castings a plus., • Knowledge of quality lab inspection equipment such as optical comparator, micrometers, calipers, gage blocks, bore gages etc., • Bachelor’s in Mechanical Engineering, Manufacturing Engineering, or equivalent required, • A minimum of 4 years post college graduate or equivalent experience required. Experience in machine tools a plus., • Autodesk Inventor, AutoCAD, and/or SolidWorks a plus., • Knowledge of manufacturing processes, materials, product and process design., • Must be able to read and interpret complex engineering drawings with in-depth understand of geometrical dimensioning and tolerancing., • Experience with machining metal required. Experience with castings a plus., • Deep knowledge of quality lab inspection equipment such as optical comparator, micrometers, calipers, gage blocks, bore gages etc.., • Self-starter with demonstrated efficient work methods, analytical & problem-solving skills and ability to handle multiple tasks in a fast-paced environment., • The individual should enjoy working in a fast paced, dynamic and results orientated team environment., • Strong communication skills with the ability to effectively work cross-functionally and externally as required., • The ability to communicate clearly in leading training sessions to enhance team performance and skills., • Knowledgeable in financial impact analysis and skilled in executing Continuous Improvement (CI) practices to optimize operational expenses, • Strong lean manufacturing knowledge, with green belt or black belt certification preferred., • Thorough understanding of 6S, Visual Management, VSM, and other Lean Tools, • Strong understanding of ERP, particularly PLM, BOM’s, Routers, • Basic understanding of costing and calculating ROI, • Knowledge with ISO standards and their application in a manufacturing environment., • Great communication skills with the ability to lead and train team members, • Quality focused, some experience in a regulated industry., • Demonstrated proficiency in managing projects from initiation to completion, ensuring timelines and goals are met., • Demonstrates the ability to implement change effectively, fostering adaptability and progress within the team, • Actively promotes a culture of safety and ensures adherence to safety standards and procedures. Physical Demands: The following definitions apply to the physical demand requirements for this position: • Frequently stand, walk, lift and push/pull 10 lbs. or less, • Occasionally bend, squat/kneel, lift and push/pull between 11 - 20 lbs., • Constantly sit, speak and manually manipulate itemMMT is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. EEO/AA Employer/Vet/Disabled We participate in EVerify.

Job Description Registered Dental Hygienist – Clifton Dental Associates Where support, technology, and patient-centered care come together. At Clifton Dental Associates, we believe exceptional patient care starts with an exceptional team experience. That’s why we focus on creating a supportive, collaborative environment where hygienists are respected, trusted, and set up for success from day one. We’re a long-standing family practice in Clifton, NJ, known for building trust with generations of patients, and for delivering advanced care in a modern, comfortable setting. As a modern office equipped with Overjet (AI-assisted radiograph review) you’ll have the tools and clinical support you need to deliver exceptional care while continuing to grow professionally. Schedule: Part-time, Mon & Tues 12pm-5pm, Wed & Fri 9am-2pm (Alternating Saturdays 9-2 from Sept - May) Why You’ll Love It Here: • Competitive compensation, • Team-first culture in a respected, community-rooted office, • Support and mentorship from clinical experts starting day one, • Fully digital workflows, including digital scanning, • Instrument replacement program, • Free, monthly CE opportunities throughout the year, • Access to a self-administered study club, • Opportunities for advancement throughout Select Dental Management What You’ll Do: • Conduct patient screening procedures, such as oral health assessments, reviewing health history, oral cancer screening, head and neck inspection, dental charting, and taking blood pressure and pulse, • Remove calculus and plaque from all tooth surfaces, • Apply preventive materials to the teeth, including sealants and fluorides, • Teach patients effective oral hygiene strategies (brushing, flossing, nutrition counseling), • Counsel patients on the importance of good nutrition to oral health, • Take impressions of patients’ teeth for study casts, • Collaborate with the clinical team to ensure consistent, high-quality care, • Associate or advanced degree in Dental Hygiene, • Active New Jersey dental hygiene license, • Commitment to patient-centered care and a collaborative mindset Our Mission & Values: To make the teams, patients, and practices we support healthier and happier. Let’s Connect. If you’re looking for a place where your work is valued, your growth is supported, and your patients feel the difference—you’ll feel right at home at Clifton Dental Associates. Our Mission & Values: To make the teams, patients, and practices we support healthier and happier. The pay range for this role varies based on experience, credentials, and availability. In addition to competitive compensation, our team members enjoy continuing education opportunities, production-based incentives (when applicable), and clear pathways for growth within the practice. #Hygiene24

Job Description Marketing & Lead Generation Manager About The Company Confires Fire Protection Service, LLC is a leader in the industry for providing fire protection services throughout New Jersey, Delaware and Philadelphia. Confires is based in South Plainfield, NJ, and has an excellent team that are responsible for delivering exceptional service to our customers for their fire system inspection, repairs and installation. We perform mandated inspections and repairs to fire alarm systems, automatic sprinkler systems, special hazard suppression systems, restaurant kitchen fire suppression systems, fire extinguishers and emergency/exit lights. The company is continually growing through its internal sales and marketing activities, strong reputation and business acquisitions. Visit our website to learn more about us, About the Opportunity Confires is currently seeking a results-driven Marketing & Lead Generation Manager to develop and implement strategies that attract and convert high-quality leads for our business. This role is ideal for someone with strong analytical skills, a deep understanding of digital marketing and sales funnels, and a passion for driving business growth through innovative lead generation techniques. Job Duties Email Marketing • Manage HubSpot as the email marketing platform - ensuring it's optimized, integrated, and driving opportunities to the sales team across the Mid-Atlantic and Midwest branches., • Develop, execute, and continually improve email campaigns to nurture leads and generate sales opportunities., • Cross-sell and retarget existing customer database of over 70,000 B2B contacts., • Develop new customer journey mapping., • Build segmented lists and targeted sequences that improve engagement and conversion., • Run A/B testing on subject lines, email content, and CTAs to refine performance., • Ensure HubSpot, Salesforce, and CRM are fully integrated, with data flow and accurate reporting., • Troubleshoot workflow issues, sync errors, and automation breakdowns., • Maintain clean and accurate lead data across platforms., • 5+ years of experience in HubSpot (automation, workflows, sequences, segmentation, reporting)., • Proven success designing and optimizing B2B email campaigns that drive sales growth to current customers and prospects., • Work cross-functionally with Sales leadership to ensure marketing campaigns are supporting measurable sales growth., • Analytical mindset using HubSpot and Salesforce., • Excellent copywriting skills for conversion-focused emails., • Service industry experience (fire protection or security)., • Knowledge of SEO, PPC, LinkedIn, or content marketing., • 401K with a company match, • Medical, Dental and Vision Insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life and AD&D insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time, • Paid holidays This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data. #LeadGenerationManager #Confires #FireProtection #Security #Marketing #Sales #SouthPlainfield #Hiring

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to operate all test equipment within the Laboratory Department, • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Compile, review data and complete test reports IAW CTG Standards, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections., • Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent with a minimum of 2 years’ experience performing in-process and final inspection preferably in a machining, automotive or aerospace business, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word, • Independent; can work with limited supervision and direction, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • ASQ CQI certified or must completed certification within 1 year of accepting position, • Strong Electronics inspection knowledge preferred, • Must demonstrate acceptable vision requirement.

Job Description Midwood EMS is seeking new and experienced EMTs to work from our Brooklyn Base located in Coney Island. WHY WORK WITH MIDWOOD EMS: • $1000 Sign-On Bonus for Full-Time Employees, • Flexible Schedules, • Seeking Full-Time and Part-Time EMTS, • Weekly Paychecks, • Paid Time Off, • Professional Work Environment, • Friendly, Dedicated Coworkers EMTs must possess current: • New York State EMT certificate, • New York State Driver’s License (if required) The duties of the crew include but are not limited to: Arrival for tour of duty : The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage ‑ the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty ‑ the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance ‑ none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients. Notice: EMS agencies in NYS are required by law (Executive Law Section 837-s) to check applicants (who may be involved in the care or transportation of patients) personally identifying information against the Sex Offender Registry and make a determination of eligibility to become a member/employee pursuant to Correction Law Article 23-A Powered by JazzHR rxOL14mBp6

Job Description Midwood EMS is seeking new and experienced Paramedics to work from our Bronx Base located in Westchester Square. WHY WORK WITH MIDWOOD EMS: • $1000 Sign-On Bonus for Full-Time Employees, • Flexible Schedules, • Weekly Paychecks, • Paid Time Off, • Professional Work Environment, • Friendly, Dedicated Coworkers EMT-Paramedics must possess current: • New York State Certified EMT Paramedic Card, • REMSCO/REMAC Paramedic Certification, • New York State drivers license (if required) The duties of the crew include but are not limited to: Arrival for tour of duty: The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage ‑ the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty ‑ the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance ‑ none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients. Additional Responsibilities: • Completes required in service training., • Maintains state and local certification., • Inventories and services ALS supplies and drugs in accordance with applicable local, state and federal regulations., • Ensures that the assigned ambulance is equipped in accordance with applicable regulations., • Performs ALS patient care in accordance with regional and state protocols., • Records patient care on proper forms. Notice: EMS agencies in NYS are required by law (Executive Law Section 837-s) to check applicants (who may be involved in the care or transportation of patients) personally identifying information against the Sex Offender Registry and make a determination of eligibility to become a member/employee pursuant to Correction Law Article 23-A Powered by JazzHR 8v9Ho8d5sw

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description Currently seeking a qualified candidate for Electrical Construction Inspector Position, with 7 to 10 years’ or more experience to join our construction management team working on a NYCDEP Construction project in the Queens, NY. Construction Inspector will utilize their knowledge of electrical codes and prior experience in construction inspection, QA / QC and report documentation, on various construction and/or reconstruction projects for municipal water and wastewater treatment plant, infrastructure, energy or manufacturing facilities or other heavy construction projects. Inspector will report to Resident Engineer and will perform daily construction electrical inspections, coordination, testing oversight, commissioning and verification of Contract Document compliance on High, Medium and Low voltage systems. Will also conduct inspection of instrumentation and controls, communications and security systems. Primary responsibilities will include but are not limited to: • Perform inspection of electrical installations, including detailed inspections of heavy utility and electrical distribution systems, underground conduit duct banks, and conduit systems ensuring conformance to Contract Documents., • Ensure all materials associated with electrical installations are in accordance with approved submittals and product data to ensure compliance with appropriate codes and specifications., • Interpret drawings and specifications., • Inspect and determine deviations from general compliance with Contract Documents., • Monitor all required field testing., • Document instances of material and/or installation non-compliance when necessary., • Advise the Resident Engineer and Contractor of conditions requiring correction., • Monitor and document contractor resource utilization (labor, materials and equipment) for field changes, and time and material work and assist with negotiation of basic field construction changes., • Attend a variety of construction meetings to administer the contract requirements; provide input and assist in interpreting specifications, drawings and other technical details., • Coordinate contractor activities with other prime contractors and owner’s activities., • Communicate all pertinent information to the construction and design project managers., • Work closely with the project’s electrical engineering design staff ensuring quality electrical installations., • Verify equipment and materials installation for payment purposes., • Maintain Payment Quantity documentation., • Perform mathematical calculations as necessary during inspection activities., • Prepare detailed daily activity and progress reports on e-Builder. Minimum Required Qualifications: 8 -10 years’ experience in the construction industry specializing in electrical installations, engineering or inspection. Associates Degree in Electrical Engineering Technology or related field of study or a HS Diploma along with Continuing Education Diploma or Certification in Electrical Construction related area. Certifications/Licenses - Ideal candidate would possess a New York State Journeyman Electrician License. Extensive knowledge and experience of National Electric Code, NFPA 70E Electrical Safety in the Workplace, electrical inspection practices and procedures. Ability to communicate effectively both orally and in writing. Ability to maintain effective working relationships owner, construction management staff and contractors, utility company representatives, regulatory agencies, and other public and private organizations. Able to prepare detailed record documentation of work in progress. Company DescriptionCertified Site Safety of NY LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Certified Site Safety of NY LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Certified Site Safety of NY LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Certified Site Safety of NY LLC’s employees to perform their job duties may result in discipline up to and including discharge.Certified Site Safety of NY LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Certified Site Safety of NY LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\nCertified Site Safety of NY LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Certified Site Safety of NY LLC’s employees to perform their job duties may result in discipline up to and including discharge.

Job Description Overview Company Overview: Harvard Protection Services is one of the fastest growing, privately owned provider of high-quality security services in the United States. We are an industry leader and are well known for our innovative thinking and entrepreneurial spirit. Our People are at the center of our Core Values and as a family organization, “we promote respect and embraces diversity.” Our Fire & Life Safety Directors support Harvard Protection in our goal of providing best in class security and life safety services. Our FSD’s are responsible for providing professional customer-focused security and life safety services for the people and the property they protect and the staff that they may lead. Responsibilities • A true Leader position, • Maintain a professional demeanor while leading staff and aiding customers, employees, visitors, and guests, • Maintain a visible presence in the facility / building assigned, • Monitor the environment, with the ability to detect suspicious and unsafe activity, • Responsible for becoming familiar with incoming and outgoing traffic, know the customers, tenants, visitors, and guests, • Answer all phones in a professional manner and demonstrate ability to perform clear and audible announcements, • Permit authorized persons to enter property and monitor entrances and exits, • Know the facility / building policies and procedures, and enforce them within the limits of the position, • Follow established emergency action planning, procedures, fire protection, and safety standards, • Monitor alarms and systems as required, • May perform operations related functions to include; scheduling, overtime management, review of daily logs and incident reports, training and development of staff, as required, • Test and inspect fire extinguishers and other fire protections devices to ensure compliance to fire and safety standards, • Discusses violations and unsafe conditions with site representative, • Prepares reports, such as inspections performed, standards violations, and recommendations for eliminating fire hazards, • Maintains records and logs, as required by law, • Maybe called upon to perform fire-fighting duties during emergencies, • May train others in fire emergency response plans, • Assists in fire drills, as required, • May perform other inspections, and safety duties as required, • May perform additional security services functions, as permitted under any required Security Officer license and as specified for the assigned site(s), in addition to Fire Inspector duties, • The essential duties and responsibilities may differ by customer location assigned Qualifications • State or municipality mandated security officer licenses, • Minimum High School Diploma, GED or the equivalent, • Must have Fire Safety Directors license, • Knowledge of or ability to learn fire inspection operations, and procedures, • Must have reliable means of communication and transportation, • Strong interpersonal communication skills, • Must have a security guard license or be able to obtain one within an acceptable period, • Previous contract security, law enforcement, fire department, military, customer service experience preferred, • Good organizations skills, • Strong interpersonal communication skills, • Write routine detailed correspondence, to include log entries, incident and reporting, • Ability to work in a fast paced, customer service environment, • Good time management skills and the ability to prioritize and problem solve, • Good computer skills including Microsoft Office

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of one or more manufacturing operations for a part-specific process by creating a capable process, eliminating defects and waste and adhering to the Quality Management System, all applicable regulations and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.  Creates and/or updates CNC programs, set-up sheets, tool sheets and other documentation related to the manufacturing process, using company-standard software applications.  Sets-up and operates CNC and secondary equipment in order to prove-out the operation, troubleshoots and revises programs, and ensures all tooling is available.  Supports the quoting process by estimating production times, resource requirements, etc. for specific manufacturing operations.  Reviews designs for manufacturability relative to a specific operation, and adds or revises specifications as needed, including GD&T.  Tests and inspects products during the manufacturing operation to determine if items meet specifications, complying with established standards and methods for inspection, testing, evaluation and calibration  Develops manufacturing operation for new and existing projects, collaborating with the Manufacturing Engineer, adhering to customer specifications and all applicable requirements, and using as many company standard processes and tools as possible.  Provides training, coaching, mentoring as required in support of operators in establishing the methods and understanding for production associates to operate jobs effectively  Teams with the Manufacturing Engineer to develop and effectively implement the inspection plan.  Performs specific validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process, as required.  Designs and/or manufactures work-holding devices and tooling, and based on tool life, establishes the re-order points to ensure availability.  Assists Manufacturing Engineer with investigating root cause of customer and/or supplier rejections and internal quality failures, as well as helps to disposition non-conforming parts and implement effective corrective action as required.  At post-production, reviews and evaluates specific manufacturing operations, including equipment performance and product quality, in order to recommend and implement improvements.  Provides on-the-job training to ensure the set-up associate and operator fully understand the process, inspection and documentation requirements, and can achieve quality and productivity standards. May also assist with developing training curriculums and providing effective follow-up to training programs.  Supports the implementation of applicable lean manufacturing techniques with production associates.  Understands and complies with company policies, safety guidelines, quality system procedures and housekeeping standards. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Manufacturing Technology Certification and 3-5 years related experience and/or training; or equivalent combination of education and experience. Powered by JazzHR A0BFyaKHJu

Job Description Real Estate Purchasing Coordinator The Real Estate Purchasing Specialist plays a critical role in supporting the Property Management team by overseeing purchasing operations and systems, administering contracts, and partnering with other departments on special projects. This position ensures the efficient, timely, and cost-effective sourcing of goods and services essential to the ongoing operation and maintenance of residential properties. Essential Duties and Responsibilities Contract Administration • Develop scopes of work and evaluate contractor proposals., • Lead vendor negotiations and administer contracts from initiation through execution., • Prepare, process, and manage contractor and vendor agreements, ensuring all required documentation is obtained (e.g., Certificates of Insurance, W-9 forms)., • Track and organize all recurring contracts by expiration dates., • Ensure compliance with contractual terms and conditions., • Maintain organized, accessible contract files across all properties. Purchasing and Procurement • Identify, vet, and onboard potential suppliers and subcontractors; maintain an approved vendor list., • Solicit and evaluate bids, proposals, and quotes; negotiate pricing, terms, and delivery schedules., • Submit and track purchase orders; oversee the purchase request process., • Support the Property Management team with purchasing needs, including online orders and coordination of deliveries., • Develop and continuously improve purchasing procedures and internal controls., • Oversee vendor performance and relationships to ensure timely and high-quality delivery of goods and services., • Manage inventory levels and restocking protocols., • Administer the Purchase Order (PO) system, including the development of procedures and training of staff. Project Coordination & Regulatory Compliance • Coordinate notices to New York City agencies for tax benefit programs., • Ensure compliance with safety regulations and maintain inspection schedules., • Support Finance, Maintenance and Property Management departments on special projects with high-priority or ad hoc special projects as assigned. Requirements: Skills and Knowledge • Strong working knowledge of purchasing, vendor management, and contract administration., • Excellent negotiation and organizational skills., • Familiarity with safety regulations, inspection processes, and regulatory permits., • Proficiency in Microsoft Office Suite; Yardi experience preferred but not required., • Proven ability to work independently and manage multiple priorities simultaneously. Education and Experience • Associate degree or higher in Business, Supply Chain Management, or a related field., • 2 or more years of relevant experience in procurement or contract administration. Benefits Medical, Dental, Vision, Life Insurance & AD&D, 401(k), Commuter Reimbursement Account, Flexible Spending Account, Paid Holidays and Paid Time Off (PTO).

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description We're looking for Paintless Dent Repair Technicians with a minimum of 3 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As a Mid-Level PDR Technician, you'll be expected to have experience accessing panels, use glue-pulling techniques, and repair smaller-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Job Description POSITION OVERVIEW: Under supervision of the Program Director, the Case Manager is responsible for providing case management, housing support to participants and monthly reporting requirements that will ensure compliance with the parameters of the program. The requirements listed below represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities as defined by the ADA to perform the essential functions of the job. KEY ESSENTIAL FUNCTIONS: Housing Liaison • Acts as liaison between participants, superintendents and building managers to ensure all repairs are completed to either the participant’s apartment unit or the building., • Maintains a Building and Apartment Log, which includes date, and condition of the apartments and buildings., • Provides case management and on site crisis intervention, • Completes required service plans., • Facilitates monthly CAB tenant meetings., • Educates participants with respect to good housekeeping and home-safety practices, budgeting and landlord/tenant relations, as necessary, • Maintains appropriate documentation of all tenant contacts., • Documents monthly progress notes in the participants’ chart, • Conducts home visits to help evaluate participants’ compliance with the rules and regulations of the program and to assess the need for referral to supportive services, • Takes random urine samples for drug screening toxicology, • May escort participants to social services agencies, as requested, • Responsible for completing annual tenant rent calculation forms., • Responsible for completing annual apartment inspection forms., • Updates monthly program data base., • Associate’s Degree or minimum of 60 verifiable college credits completed, Bachelor’s Degree Preferred, • Minimum of one (1) year previous relevant experience in a Mental or Behavioral Health environment required., • Ability to use business acumen to exercise good judgment and decision-making., • Ability to deal with sensitive issues with diplomacy and discretion., • Must be able to multi task with strong organizational skills., • Excellent interpersonal skills and able to communicate both verbally and in written form., • Commitment to cultural diversity and sensitivity., • Ability to maintain a professional demeanor under pressure, and operate with a keen sense of urgency and commitment to quality.

Job Description We are offering an exciting opportunity for a Load Rating Engineer to join our New York City team. H&H is currently growing the bridge inspection services to support client and project needs in the Structural/Transportation focus areas. This candidate will work with a team to provide bridge inspection load ratings for a varied client base in the New York Metropolitan area. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Load Rating Engineer on major projects, • Perform Level 1 and Level 2 load rating calculations pertaining to and in support of bridge inspection findings, • Work closely with a team to manage load rating reports, • Occasional field site visits, • BS in Civil Engineering, • PE License required (in NY), • Five+ years of Structural Engineering experience with a focus on bridge design and inspection/load ratings (preferred), • Completed a FHWA approved comprehensive bridge inspection training course (i.e., the National Highway Institute “Safety Inspection of In-Service Bridges”)., • Ability to work effectively as part of a team and manage small groups and projects, • Experience with AASHTOWare load rating software (preferred), • Experience with 3D Finite Element Analysis software (such as CSiBridge, SAP2000), • Experience with local client base preferable (NYSDOT) Salary range — $100,000-$130,000 annually. Salary commensurate with the level of experience. We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

Job Description Watch Engineer Come join us at St. Cabrini Nursing Home! We are a 304-bed, Faith-Based, Nonprofit, Short-Term Rehabilitation and Skilled Geriatric Care facility founded in 1974 in continuation of St. Frances Xavier Cabrini’s legacy of serving those in need through works of healing, teaching, caring and giving. We are looking to fill the position of Watch Engineer. • $40 per hour. Operate and maintain stationary engines, boilers, generator, and mechanical equipment to provide utilities in the building. Possess knowledge of the integral workings of the facility. Perform general building maintenance as directed. Work on a rotating watch schedule. Watch Engineer Qualifications: • High School diploma or equivalent., • Minimum of 5 years experience as a fireman, water tender or stationary engineer., • Alternate experience as a Maintenance Mechanic at the Home with 3 years of experience and a demonstrated interest in power plant mechanics will be given consideration., • Blueprint reading ability required., • Required to interpret chemical treatment reports and adjust treatment to the refrigeration and boiler equipment., • Monitor and inspect equipment such as switches, valves, gauges, alarms, and safety devices., • Observe and interpret readings on gauges, meters and charts- registering various aspects of boiler operation to ensure boilers are operating properly., • Maintain daily logs of operation, maintenance and safety activities, test results, instrument readings, equipment malfunctions and maintenance work., • Operate stationary engines, boilers, pumps, compressors, and HVAC equipment., • Perform preventive maintenance on motors, valves, gaskets, and bearings by lubrication., • Check air quality of ventilation systems and make adjustments., • Supervise the work of outside contractors while working on equipment., • Assist Director in conducting fire drills, fire alarm tests and sprinkler blow down., • Perform monthly inspection and updates of all fire extinguishers. We aim to create a supportive workplace where you are valued, compensated fairly and provided the tools to thrive! Cabrini of Westchester can offer you: • Competitive Compensation, • Health, Dental, and Vision insurances, • Flexible Spending Account, • Benefits available 1st of the mo. following 30 days, • Life and supplemental insurances, • Employee Assistance Program with Discount marketplace, • Retirement Plan Cabrini of Westchester is an Equal Opportunity Employer and adheres to a policy that prohibits discrimination on the basis of race, color, sex, sexual orientation, gender identity, religion, creed, national or ethnic origin, citizenship status, age, disability, veteran status, or any other legally protected class. #CAB2025

Job Description SUMMARY The Blender operates, maintains and troubleshoots all blending machines, such as airlocks, blowers, motors, lab equipment; measures bins, inspects bins, cleans floors, fills feeders, takes samples. The products product must meet BSM Co specifications. Any other duties as delegated by supervisor ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Is responsible for a variety of support and service functions including: • Learn, operate, maintain and trouble shoot all blending machines, such as airlocks, blowers, motors, lab equipment, computers, etc., • Blend flour from flour bins and operate a select-a-type panel board and/or computer interface, which controls the pneumatic transfer of product from bulk bins to packer, bulk trucks, bulk rail cars, etc., • Direct the packers and advises what flour blend is in specific bins to be packed and which bags are to be used., • Make adjustments and repairs to blending systems as necessary., • Work with and interacts with truck drivers, packers and supervisors, sales staff and truck dispatchers, to assure that production and shipping schedules are met., • Take bin inventory, inspects bins, cleans floors, fills feeders, takes samples, and any other duties as delegated by supervisor., • Calculate figures to prepare reports and complete all required daily paperwork to track movement and disposition of flour., • Work weekends as required., • Print Loading Orders, input truck shipments and verify correct “Bill of Lading”, “COA” and “Vehicle Inspection Form” and complete any other paperwork for each load as needed, • This is not an all-inclusive list; the blender is expected to perform other duties. DIMENSIONS The Blender position operates on the 1st, 2nd, or 3rd shift, but may be required to work other hours as business dictates. QUALIFICATIONS to perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE High school diploma or equivalency is required. No previous experience is required. LANGUAGE SKILLS Must be able to read, write and comprehend English and complete reports. Must have the ability to read, analyze, and interpret memo, technical procedures, or governmental regulations. MATHEMATICAL SKILLS Ability to work with mathematical concepts and apply concepts such as addition, subtraction, multiplication, division, fractions, percentages, ratios, and proportions to practical situations REASONING ABILITY Must have the ability to learn system functions, operations and process flow and be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS On-going training to enhance performance in position as required. FOOD SAFETY / SECURITY REQUIREMENTS The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained on and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of their work environment and prevents any accidental or intentional adulteration of products produced at this facility. As a result any employee has a right to put product on hold if they have a concern. At the plant level, only the Quality Assurance and Plant Manager have the authority to release product on hold. SAFETY • While performing the essential job functions, the employee is expected to work in a safe manner and follow company policies regarding safety., • It is the expectation and responsibility of the employee to report any and all injuries immediately to the supervisor, and to report to supervision any safety situation that the employee feels is substandard and poses a risk for employee injury, property damage, or loss. TEAMWORK Ensures that appropriate individuals are informed about matters impacting their areas of responsibility; works well with others; shares knowledge and experience with others; demonstrates respect and consideration for others' opinions; contributes to the overall task of the team. Demonstrates integrity; works effectively in teams; facilitates inter-departmental cooperation; cooperates with supervision and peers to accomplish work assignments; helps create and maintain effective working relationships. DEPENDABILITY Follows through on tasks; requires minimum supervision and follows instructions and procedures. Arrives at work on time; follows Company policies on vacations, leaves, etc. Observes Company rules; completes tasks within deadlines. OTHER SKILLS & ABILITIES Must maintain working knowledge of Bay State’s product line and keep abreast of changes and upgrades of products. Must be able to type and have the ability to utilize computer programs including word processing, spreadsheet applications such as Office products and the Company’s BaySys system. Must be detail oriented. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to work in an environment which has extremes in temperature., • Be able to climb ladders, and work in high places., • Be able to stand and/or walk for extended periods of time, • Occasionally required to bend, stoop, kneel, crouch or crawl., • Finger and hand dexterity to type at a keyboard, and to use basic hand tools occasionally., • Required to lift and or move items up to 100 lbs. in weight., • Vision requirements are close vision, distance vision, color vision and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The work environment is a wheat flour manufacturing facility., • While performing the duties of this job, the employee is regularly exposed to moving mechanical parts., • The employee will work in an atmosphere which contains various amounts of dust, fumes and/or airborne particles., • The employee is frequently exposed to wet and/or humid conditions., • The employee is occasionally exposed to high, precarious places., • The employee will be exposed to extremes in hot (100+ degrees) and cold conditions., • The work environment is noisy, frequently in excess of 100 decibels.

Job Description Position Summary: CT/MRI/PET-CT Field Service Engineers will travel and execute all required service requests, including repairs, planned maintenance, equipment de-installations and installations. Must have the ability to troubleshoot and accurately resolve technical issues with the use of laptop and other equipment. Must be familiar with CT/MRI/PET-CT medical equipment. OEM or third party training/experience preferred. Must have Toshiba/Canon CT Experience. Location: New York, NY Essential Duties: • Perform on-site system installations and de-installations., • Plan, schedule, and execute all required planned maintenance (PM) activities., • Provide on-demand phone and on-site support as required., • Collaborate with Customers and Sales to clarify customer requirements and technical needs., • Assist with site planning and sales consultations as needed., • Maintain inventory integrity through proper handling, inspection, and warehousing., • Promote positive customer relationships, including non-service call visits and meetings. Education/Experience: Required: • Must have extensive background in servicing Medical Imaging equipment., • Must have 3+ years experience of Toshiba/Canon CT., • Candidate must be willing to be on call, this includes weekends and holidays., • Candidate must have a valid U.S. driver's license. Preferred: • An Associate Degree in Electrical Engineering or military-trained in electronics, equivalent certified electrical training or equivalent experience on electronic equipment is a PLUS., • 5+ years experience of Toshiba/Canon CT. Travel: • Must be willing to travel within the United States. Competencies: • Excellent verbal and written communication skills., • Strong interpersonal communication skills; experience in effectively communicating key data., • Analytic, organizational, and problem-solving skills., • Must be a proactive, strategic thinker who will be a team player., • Ability to response promptly to all stakeholders., • Ability to meet deadlines and provide accurate and quality reports., • Solving problems on a first call basis., • Personal qualities of integrity, credibility, positivity, and unwavering commitment. Physical Demands • While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand, walk, sit, reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance, stoop, kneel, and crouch. The employee must occasionally lift and/or move up to 25 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Job Description We're looking for Auto Interior Repair/Glass Repair Technicians with a minimum of 3 years of professional automotive interior repair and/or glass repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Mid-Level Interior Repair/Glass Repair Technician, you'll be expected to be highly skilled in interior repair and glass repair including: • Repairing damaged cloth/fabric, leather, plastic, vinyl, and other upholstery, • Repairing center consoles, seats, dashboards, headliners, plastic, and stitching, • Color matching/dying cloth and fabric, • Repairing stars, bullseyes, combination breaks, cracks, and scratches in windows/windshields At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Hazen and Sawyer is seeking an entry-level engineer for a variety of water related assignments. Candidate will participate on design teams for water, wastewater, and/or stormwater projects. Project work may include initial studies, design and inspection of conveyance systems, inspection of stormwater infrastructure, design of wastewater treatment facility upgrades, design of water treatment facility upgrades, asset management, and/or design of green infrastructure. Field work and site visits from study or design through construction may be required. Strong verbal and written communication skills are required. Minimum professional qualifications are: • B.S. degree in environmental, civil, chemical, or mechanical engineering; or related engineering field (MS considered a plus), • EIT or plan to obtain, • Entry Level to 2 years of experience, • Candidate must possess excellent writing, communication, and interpersonal skills., • Must be proficient in all computer software typically used (e.g., Microsoft Word, Excel, PowerPoint, etc.)., • CADD and other software (GIS, etc.) skills will be considered a plus., • Candidate must have strong organizational skills. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Chief Engineer Needed for Luxury Residential Rental Properties in New York City We are searching for a Luxury Real Estate Chief Engineer in Brooklyn, New York for 5 towers housing nearly 850 residential units including both Condominiums and Rental Apartments. The ideal candidate will have diverse experience in organizing and safety concepts for the buildings’ maintenance and crew operations. A FSD Certification is required for this position. Living on premises is required in a brand new luxury 2 bedroom apartment provided by the company. The Qualifications of the Luxury Real Estate Chief Engineer are as follows: • Minimum of 10+ years of extensive experience in multi-Family / Residential hi-rise rental Building maintenance., • Must have FSD Certification, • HVAC Experience required, • Must be proficient with building mechanical systems and technology, • Must be able to lift and/or carry object of 25 pounds or more, • Requires walking and standing to a significant degree, • Strong leadership skills and 10+ years of managing large teams of people, • Must have experience working in the property management industry, both with residential rentals and condominiums, • Chief Engineer will have senior oversight of the rental property and maintenance operations, • Will be responsible for all preventative maintenance programs for all mechanical and common elements on the property, including but not limited to refrigeration, heating, cooling, water treatment, plumbing, emergency management, fire life safety systems, etc., • Meeting and working with Construction supervisors to discuss different phases of construction, working through issues, punch lists and ensure all plans, charts, warranties have been received, • Responsible for inspection of common area, and back of house mechanical and electrical rooms, • Participation in the development of departmental budgets, • Review, monitor and report on opportunities for Energy, Preventive, • Maintenance, and/or other cost-saving measures, • Works with General Manager, Property Managers and Superintendents., • Oversees and manages all building maintenance staff, • Maintains calm demeanor in emergency situations, • Attends all staff meetings, construction, ownership, etc., • General oversight of retail build outs, including meeting with General Contractors and tenants, • Maintain all equipment in accordance with local codes, restrictions, and licensing requirements, • Overseeing all third party vendors and services purchased, including, supplies, electrical,, • plumbing, testing, etc., • Monitors utility consumption and ensuring all savings measures are being used, • Troubleshoot and resolve technical problems, ensuring minimal downtime and disruption of services, • Maintaining historical and current preventative maintenance logs for the property, • Procure and review copies of architectural, mechanical, and electrical blueprints for all tenant remodeling for the purpose of ensuring actual work conforms to approved blueprints, • Ensure all work orders are assigned, completed, commented on and closed in a timely manner, escalating when needed., • Create and Maintain vendor/contractor list, ensuring all COIs and Contracts are up to date, • Contacts vendor to submit bids for new projects, contracts, outsourced repairs, etc., • Works with Superintendents to ensure work orders are completed Competitive Salary, potential bonus based on performance and weekly insurance allowance to the right candidate. Rent Free Luxury 2 Bedroom Apartment on the premises. Key Words: Brooklyn, NY, Luxury Residential, Rental and Condo Properties, Chief Engineer, Maintenance Engineer, planning, cost reducing implementation, organized Company DescriptionBest Headhunters is a team-oriented search firm who provides a unique, hands-on caring approach in helping a candidate match their experience with the right job opportunity. There is never a fee to the candidate for our representation. Plus, you will receive the benefit of our extensive experience and our long-term relationships with many of America's leading companies. We offer career coaching and will assist you every step of the way in your goal to advance your career. For additional information on Best Headhunters and our ever-expanding employment opportunities, visit our Web site at: . We encourage candidates to be pro-active, especially in light of today's uncertain business environment in which mergers and downsizing are a common reality. This underscores the importance of placing your career in the hands of a search firm with your best interests at the core of its daily mission.Best Headhunters is a team-oriented search firm who provides a unique, hands-on caring approach\r\nin helping a candidate match their experience with the right job opportunity. There is never a fee to\r\nthe candidate for our representation. Plus, you will receive the benefit of our extensive experience\r\nand our long-term relationships with many of America's leading companies.\r\nWe offer career coaching and will assist you every step of the way in your goal to advance your\r\ncareer. For additional information on Best Headhunters and our ever-expanding employment\r\nopportunities, visit our Web site at: . We encourage candidates to be\r\npro-active, especially in light of today's uncertain business environment in which mergers and\r\ndownsizing are a common reality. This underscores the importance of placing your career in the\r\nhands of a search firm with your best interests at the core of its daily mission.

Job Description MISSION STATEMENT Are you ready to give back to the community while pursuing your passion? For over 50 years, Acacia Network and its affiliates have been committed to improving the quality-of-life and wellbeing of underserved communities in New York City and beyond. We are one of the leading human services organizations in New York City and the largest Hispanic-led nonprofit in the State, serving over 150,000 individuals every year. Our programs serve individuals at every age and developmental level, from the very young through our daycare programs to mature adults through our older adults centers. Our extensive array of community-based services are fully integrated, bilingual and culturally competent. POSITION OVERVIEW Under supervision of the Program Director, the Service Coordinator is responsible for providing case management, housing support to participants and monthly reporting requirements that will ensure compliance with the parameters of the program. The requirements listed below represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities as defined by the ADA to perform the essential functions of the job. KEY ESSENTIAL FUNCTIONS Housing Liaison • Acts as liaison between participants, superintendents and building managers to ensure all repairs are completed to either the participant’s apartment unit or the building, • Maintains a Building and Apartment Log, which includes date, and condition of the apartments and buildings, • Reports all non-compliance issues with respect to the apartment and building to the Supportive Housing Manager, including incidents requiring immediate attention, • Provides case management and on-site crisis intervention, • Completes required service plans, • Facilitates monthly CAB tenant meetings, • Educates participants with respect to good housekeeping and home-safety practices, budgeting and landlord/tenant relations, as necessary, • Maintains appropriate documentation of all tenant contacts, • Documents monthly progress notes in the participants’ chart, • Conducts home visits to help evaluate participants’ compliance with the rules and regulations of the program and to assess the need for referral to supportive services, • Takes random urine samples for drug screening toxicology, • May escort participants to social services agencies, as requested, • Responsible for completing annual tenant rent calculation forms, • Responsible for completing annual apartment inspection forms, • Updates monthly program data base, • High School Diploma required, • Associate’s degree in human services or other related fields preferred, • Three (3+) years previous relevant experience in a Mental or Behavioral Health environment required, • Ability to use business acumen to exercise good judgment and decision-making, • Ability to deal with sensitive issues with diplomacy and discretion, • Must be able to multitask with strong organizational skills, • Excellent interpersonal skills and able to communicate both verbally and in written form, • Commitment to cultural diversity and sensitivity, • Ability to maintain a professional demeanor under pressure, and operate with a keen sense of urgency and commitment to quality Acacia Network provides a comprehensive and competitive benefits package to our employees. In addition to a competitive salary, our benefits include medical, dental, and vision coverage. We also offer generous paid time off, including vacation days and paid holidays, to support a healthy work-life balance. We prioritize the well-being of our employees both professionally and personally. As an Equal Opportunity Employer, we encourage individuals from all backgrounds to apply.

Job Description Job Title: Fire Protection Technician Location: Newark Airport Terminal A Department: Facilities Maintenance Job Summary: The Fire Protection Technician plays a key role within the Facilities Management team to support the Fire Protection Systems within Terminal A. The Facilities Maintenance Fire Protection Technician will maintain fire protection systems and be the first investigator for all fire alarms as well as the primary point of contact for both internal and external customers. You will be part of the Munich Facilities Maintenance department operating at Newark Airport Terminal A twenty-four hours a day, seven days a week, and will work within the facilities maintenance department and our contractors to maintain the terminal. Responsibilities: • Perform monthly, quarterly, semi-annual & annual flow testing of fire protection systems and backflow preventors as per NFPA (see below associated NFPA), and perform onsite emergency troubleshooting and repairs of the Terminal A fire alarm and protection systems, identifying code and non-conformance issues:, • Conducting regular inspections and tests of the fire protection systems to ensure they are functioning correctly and in compliance with NFPA standards. You will also perform emergency troubleshooting and repairs as needed, identifying and addressing any code violations or non-conformance issues., • Act as a first investigator for fire alarms/fire protection systems within Terminal A and operate the fire protection and Fire Alarming systems and software when needed:, • This involves being the initial responder to any fire alarms or issues with the fire protection systems. You will assess the situation, determine the cause of the alarm, and take appropriate action to resolve the issue. This may include operating the fire protection systems and FACP to ensure the safety of the terminal., • Strong problem solving and decision-making abilities and able to work well with other team members and the terminal stakeholders., • Read and interpret blueprints, submittals, and operational/product manuals:, • Ability to understand and interpret technical documents, including blueprints, submittals, and product manuals, to effectively maintain and troubleshoot the fire protection systems., • Ensure that work orders for planned FLS maintenance are in place and stakeholders are informed:, • This involves creating and maintaining schedules for planned maintenance activities, ensuring that all necessary work orders completed, and keep stakeholders informed of the status of maintenance activities and deficiencies., • Monitor the CMMS system (Maximo) to ensure all the FLS work orders are completed on time:, • Overseeing the execution of maintenance work orders, receiving and reviewing reports on completed work, and ensuring that all information is accurately logged into the CMMS system (Maximo)., • Ensure events/incidents are logged into the CMMS system, attended to, and resolved as per SLAs, using the standard work order procedures, • Inform, communicate, and collaborate if there is an event needing other stakeholders’ involvement:, • Requires effective communication and collaboration with other stakeholders when an event or issue requires their involvement., • Monitor and oversee that planned and ad-hoc inspections are taking place:, • Includes ensuring that both scheduled and unscheduled inspections and work are conducted as required to maintain the fire protection systems., • Overseeing the performance of Fire Life Safety subcontractors in carrying out planned maintenance and reactive management activities and coordinating with management to address any issues or concerns., • Monitor all FLS KPIs and SLAs for compliance:, • This involves tracking key performance indicators (KPIs) and service level agreements (SLAs) to ensure compliance with established standards and performance metrics., • Prepare documentation for events for pre and post stakeholder meetings, • Issue shift/daily reports as required:, • This involves preparing and issuing reports on a daily or shift basis to provide updates on maintenance activities, issues, and performance metrics., • Monitor Cerberus Danager Management System & Building Management System(s) status and take appropriate action to address any received faults through management of corrective work order:, • This involves monitoring the status of the Fire Alarm Software & Building Management Systems (BMS, SCADA and taking appropriate action to address any faults or issues that arise, including issuing and managing corrective work orders., • Perform building inspections including facilities maintenance and life safety audits., • Shift work required and will cover other shifts for PTO/vacations, as required:, • This requires flexibility to work different FM positions and shifts as needed, including covering for other team members during paid time off (PTO) or vacations.Qualifications:, • NICET Level II/NICET Level III Certification is preferred., • Familiarity with NFPA Requirements for Fire Protection & Life Safety Systems., • Minimum of 3 years of experience in the testing, inspection, and maintenance of fire sprinklers/clean agent, fire extinguishers, and related equipment., • Back-flow certification is preferred and must be able to obtain S12, S13, and S14 certification within the first six months if you don’t already have it., • Be able to sit, stand, walk, bend, climb stairs for extended periods, and lift at least thirty (30) lbs., • Possess a GED, high school diploma, or equivalent. 1. Fire Alarm & Detection Systems • NFPA 14 – Standard for the Installation of Standpipe and Hose Systems, • NFPA 15 – Standard for Water Spray Fixed Systems for Fire Protection, • NFPA 25 – Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, • NFPA 291 – Standard for Fire Flow Testing and Marking of Hydrants3. Special Fire Suppression Systems, • NFPA 17 – Standard for Dry Chemical Extinguishing Systems, • NFPA 17A – Standard for Wet Chemical Extinguishing Systems (Common in kitchen suppression systems.), • NFPA 30 – Flammable and Combustible Liquids Code (Includes fire protection requirements for liquid storage.), • NFPA 96 – Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations (Covers kitchen hood suppression systems.), • NFPA 2001 – Standard on Clean Agent Fire Extinguishing Systems (Covers FM-200, NOVEC 1230, and other gas-based suppression systems.)4. Portable Fire Extinguishers, • NFPA 72 – National Fire Alarm and Signaling Code (Also listed under Fire Alarm Systems.) Powered by JazzHR abh1DYYlpl

Job Description Hello All, position : SAP PM Location : NJ Rate : Market 5-7 yrs experience in Sap Plant maintenance, Calibration. · Gathers requirements, develops and documents designs, configures and unit tests the Plant Maintenance functionality in SAP. · Hands-on experience in SAP test equipment management, Calibration process mapping in SAP. · Hands on experience in configuring integration with SAP PM with SAP QM,MM,PP. · Develop SAP PM data object templates like Task lists, plans, Measuring points. · Hands on experience in SAP QM data objects, inspection lots creation based on SAP PM orders, calibration orders. · Should have experience in developing RICEF objects on their own, build logic , prepare FDS and explain the developer to have a bug free development. · Should have experience in functional development of interfaces from SAP to other bolt on systems. · Develops test procedures and coordinates testing of changes with process owners. Follows established change control procedures to move any changes to Production. · Researches and resolves issues with the Plant Maintenance. Coordinates closely with the other SAP Analysts to ensure that solutions developed will meet customer’s needs. -Ajay NEOSTRIDE LLC | neostride.com 2001 Route 46, Suite 310 Waterview Plaza Parsippany, NJ 07054 w: 973.343.2412 ext 705 m: 972.514.3662 f: 973.400.0051 e:

Job DescriptionIntroduction Gallagher is a global leader in insurance, risk management and consulting services. We help businesses grow, communities thrive and people prosper. We live a culture defined by The Gallagher Way, our set of shared values and guiding tenets. A culture driven by our people, over 55,000 strong, serving our clients with customized solutions that will protect them and fuel their futures. Overview Gallagher Bassett Technical Services is seeking a qualified Site Safety Manager to become a valued member of our Safety & Health team. The ideal candidate for this position must be a proactively motivated individual with the ability to manage projects and deliver quality consulting services with minor supervision. This Site Safety Manager position is a casual (on as needed basis, possibly going to a full-time) position overseeing safety operations for New York City metro area construction projects. The Site Safety Manager shall exclusively be responsible for safety matters related to the Work Site for which they are assigned to and shall not have any other responsibilities associated with the Contract. Responsibilities • This position will report directly to Director of Field Operations (NY Metro Area)., • Implement and enforce applicable construction site safety programs in accordance with all federal, state, local, and our customer’s needs., • Oversee and manage all site activities that relate to safe work practices. Review all construction/engineering designs and plans., • Ensure our Clients’ subcontractors perform all required actions and duties as it relates to system safety compliance; fire/ life safety; safety training; required safety certification; emergency procedures, plans and drills; and any other environmental safety/risk management compliance., • Safety/security implications related to contractor and subcontractor operations., • Perform daily safety inspection report audits and related testing and verification of operational safety readiness., • Coordination of other safety personnel for construction or build-out projects/activities., • Manage the supply and deployment of PPE to field personnel., • Coordination of Safety related items with the General Contractor’s office., • Familiarity with and environmental regulations and guidelines and workplace hazard controls; and ability to provide recommendations to reduce potential workplace hazards., • High school diploma or GED equivalent, • A valid NYC Department of Buildings (DOB) Licensed Site Safety Manager, • A valid 62-hr. Supervisor SST card, • A valid FDNY Certificate of Fitness S56, • Past experience and/or familiarity with the commercial high rise and/or institutional building construction development projects., • Competent to instruct and provide training/instruction on-site personnel as needed., • Ability to read, write, and speak English fluently. Preferred:, • NYC DOB licensed Construction Superintendent, • Certified Health and Safety Technician (CHST) preferred, but not required., • Successful completion of the 30-hour OSHA Construction Safety & Health (29 CFR 1926) Course, • Active member of American Society of Safety Professionals (ASSP)., • Bi-lingual or multi-lingual communication skills., • Ability to negotiate client properties including walking, climbing, lifting, and standing., • Ability to work independently to deliver on a timely basis with minimal supervision, • Strong organizational skills to participate in multiple projects simultaneously, prioritize assignments and prepare daily/comprehensive reports., • Strong analytical and critical thinking skills to interpret collected data/information, apply appropriate occupational safety and health standards/regulations, and offer recommendations for improvement., • Strong understanding of regulatory, professional, and industry standards and practices., • Proactive attitude and customer service focus. On top of a competitive salary, great teams and exciting career opportunities, we also offer a wide range of benefits. Below are the minimum core benefits you’ll get, depending on your job level these benefits may improve: • Medical/dental/vision plans, which start from day one!, • Life and accident insurance, • 401(K) and Roth options, • Tax-advantaged accounts (HSA, FSA), • Educational expense reimbursement, • Digital mental health services (Talkspace), • Flexible work hours (availability varies by office and job function), • Training programs, • Gallagher Thrive program – elevating your health through challenges, workshops and digital fitness programs for your overall wellbeing, • Charitable matching gift program Apply to review our U.S. Eligibility Requirements and Pay Disclosure Statement Inclusion and diversity (I&D) is a core part of our business, and it’s embedded into the fabric of our organization. For more than 95 years, Gallagher has led with a commitment to sustainability and to support the communities where we live and work. Gallagher embraces our employees’ diverse identities, experiences and talents, allowing us to better serve our clients and communities. We see inclusion as a conscious commitment and diversity as a vital strength. By embracing diversity in all its forms, we live out The Gallagher Way to its fullest. Gallagher believes that all persons are entitled to equal employment opportunity and prohibits any form of discrimination by its managers, employees, vendors or customers based on race, color, religion, creed, gender (including pregnancy status), sexual orientation, gender identity (which includes transgender and other gender non-conforming individuals), gender expression, hair expression, marital status, parental status, age, national origin, ancestry, disability, medical condition, genetic information, veteran or military status, citizenship status, or any other characteristic protected (herein referred to as “protected characteristics”) by applicable federal, state, or local laws. Equal employment opportunity will be extended in all aspects of the employer-employee relationship, including, but not limited to, recruitment, hiring, training, promotion, transfer, demotion, compensation, benefits, layoff, and termination. In addition, Gallagher will make reasonable accommodations to known physical or mental limitations of an otherwise qualified person with a disability, unless the accommodation would impose an undue hardship on the operation of our business. Powered by JazzHR BZzgty9dFh

Job DescriptionSalary: $110k - $140k annually C.A.C. Industries is a successful and growing heavy/civil construction contractor in NYC. C.A.C. employees are driven by four Core Values: Its Always We, Be Green & Lean, Educate to Transform, and Be Humble & Kick Ass. These Core Values help us achieve our Core Purpose of Creating Unlimited Opportunities. Our company culture has led us to being listed on Crain's Best Places to Work in NYC for the last four years. We are currently seeking a Safety Manager to join our team. The Safety Manager will manage all aspects of safety on assigned project(s). The Safety Manager must have extensive practical knowledge, relevant work experience and continuing education in Construction Safety, preferably Heavy Civil and Utility. Qualifications: • 5+ years of Construction Safety experience, preferably Heavy Civil and Utility., • Ability to recognize unsafe conditions and behaviors and implement corrective measures., • Evaluates situations and render appropriate decisions without the need for immediate supervision, • Strong knowledge of OSHA regulations., • Effectively able to influence others and work collaboratively to accomplish goals., • Previous experience working with Job Hazard and Job Safety Analyses., • Relates well with others of varying skill sets and experience levels. Able to effectively give instruction, receive direction; perform activities that require instructing others, persuading and negotiating., • Facilitates projects and effectively manages multiple tasks., • Excellent interpersonal, organizational, and communication (verbal and written) skills., • Strong interpersonal skills, able to communicate effectively with project teams, employees as well as client representatives., • Computer proficiency in Microsoft Office Word, Excel, PowerPoint and Outlook., • Organized and able to work effectively in a deadline driven, fast paced environment. Certifications: • OSHA 30-hour Construction Safety certification required., • NYC DOB Superintendent License required., • HAZWOPER (OSHA 40) required., • OSHA-Authorized Construction Outreach Trainer (OSHA 500/502) preferred., • NYC DOB Site Safety Coordinator or Site Safety Manager license highly preferred., • Construction Health and Safety Technician (CHST) and/or Safety Trained Supervisor (STS) preferred., • First Aid/CPR with AED preferred. Education: • Bachelors degree preferably in Occupational Safety & Health or equivalent combinations of education, training and related experience. Major Responsibilities: • Ensure Company, client and OSHA safety standards and policies are implemented, understood and consistently complied with., • Maintains project safety related records including safety inspections, meetings, trainings and incidents., • Perform frequent safety inspections to ensure compliance with all Company, Client and OSHA safety requirements. Complete safety inspection form identifying unsafe conditions and behaviors and recommends corrective action., • Plan, conduct and document project safety meetings: Issue meeting minutes, feedback and recommended action plans to appropriate project management. Follow up on corrective action effectiveness., • Investigates all incidents, including near-misses, generates proper reports, maintains all job safety records., • Creates, with input from project team, Job Hazard Analyses as needed to ensure proactive safety planning., • Provide leadership, coaching, mentoring, technical advice and expertise to project supervision employees toward achieving a zero-incident environment., • Capable of identifying known/potential exposures and recommend and implement immediate corrective measures to mitigate risk. Other Responsibilities/Peripheral Functions: • Able to work a flexible schedule at times to meet business needs., • Assumes additional responsibilities/projects as assigned, such as participating in company committees/teams. What We Offer: • Employee Stock Ownership Plan, • Medical, Dental and Vision Insurance, • 401k Retirement Plan with Company Match, • Employee Assistance Program, • Life Insurance Plans, • Disability, • Career Development through Mentoring Program, Learning & Development, Continuing Education C.A.C. Industries, Inc. is an equal opportunity employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, national origin, ancestry, alienage or citizenship status, age, disability or handicap, sex, gender identity, marital status, familial status, veteran status, sexual orientation or any other characteristic protected by applicable federal, state or local laws.

Job Description The future of advertising is beautiful. Thanks (thanks.co) is hiring an Implementation & Integrations Engineer to join our US team and play a founding role in ensuring seamless technical onboarding across our advertising platform. You'll collaborate closely with our sales, account management, product and engineering teams to execute our vision to create the only ad network where everyone wins. This role forms the critical bridge between our technical platform and our advertising partners. You'll be responsible for the end-to-end technical onboarding of advertisers and publishers, ensuring campaigns are flawlessly launched and properly tracked. This role combines hands-on technical troubleshooting and partner-facing problem solving, making you the "voice of the customer" who translates partner needs into product enhancements. We're looking for a technically-minded problem solver who thrives in the intersection of customer success and ad tech. You'll need strong debugging skills, advertising domain knowledge, and the communication abilities to translate complex technical issues into clear, actionable solutions for non-technical stakeholders. This is a unique opportunity to build processes from the ground up, while directly impacting revenue growth and partner satisfaction. What you'll do • Technical Partner Onboarding: Set up new advertisers and publishers in our admin system, conducting comprehensive testing to ensure campaigns display correctly, tracking functions properly, and all technical integrations work seamlessly from day one., • Campaign Quality Assurance: Execute detailed QA processes including verifying image quality and aspect ratios, checking copy for accuracy and proper formatting, validating targeting configurations, and identifying technical errors through browser console monitoring and E2E testing., • Technical Troubleshooting & Integration Support: Debug complex ad tech integrations using Chrome DevTools, track HTTP requests and errors, and ensure accurate data flow across multiple systems including CRMs, tracking platforms, and partner networks., • Cross-Platform Data Validation: Verify tracking accuracy for CPL, CPA, and CPC campaigns by cross-referencing data across our database, UserFlux, networks, and partner systems to ensure accurate reporting and budget management., • Process Development & Documentation: Build and maintain comprehensive onboarding guides, QA processes, and technical documentation while serving as the "voice of the customer" to provide product and engineering teams with partner feedback and enhancement suggestions. Requirements What we're looking for • Web Debugging Expertise: Strong ability to track and trace HTTP requests, identify errors, and troubleshoot web-based integrations using Chrome DevTools or similar inspection tools., • Technical Foundation: Solid understanding of web authentication methods (API keys, bearer tokens, JWTs), DNS, HTML, CSS, JSON, query strings, caching, and iframes, with SQL skills for database comparison and analysis., • Advertising Domain Experience: understanding of campaign performance monitoring and optimization, pixel/UTM tracking, and advertising metrics and attribution models., • Affiliate Marketing Knowledge: hands-on with Impact, CJ Affiliate, Rakuten, Partnerize, or Awin - with understanding of tracking, attribution, conversion events, partner setup, reporting feeds., • Communication Excellence: Ability to explain complex technical issues in non-technical terms, set clear expectations and timelines, and respond empathetically to partner complaints and frustrations., • Problem-Solving Mindset: Methodical approach to diagnosing technical integration issues, with pattern recognition skills and the ability to remain calm under pressure while juggling multiple onboarding timelines., • Detail-Oriented & Data-Driven: Exceptional attention to detail for ensuring campaign accuracy, combined with ability to analyze data for trends and insights., • Startup Mentality: Self-motivated, organized, comfortable with ambiguity, adaptable to rapid change, and excited to be scrappy with available tools and resources while building and improving processes. Nice to have - but can be learned in the role • Familiarity with major ad serving platforms, e.g. Google Ad Manager, and their integration patterns., • Understanding of CORS, X-Frame-Options, Content-Security-Policy (CSP), SPF, DKIM, and DMARC configurations., • TypeScript proficiency - ability to read and understand code for more effective debugging and integration support. Experience as a solutions engineer, implementation engineer, integration engineer, or as an engineer focused on technical onboarding is key. Benefits Why Thanks? What if people actually loved ads? Thanks makes this possible. We're a Sydney-headquartered, global company on a mission to kill ad fatigue and create advertising that consumers genuinely appreciate. Our industry-leading engagement goes beyond capturing attention - we delight, reward, and transform how people experience ads. Here's why you'll love working with us: Direct Impact: Your work will directly shape our growth, products, and trajectory as we scale rapidly. Ownership and Autonomy: We'll give you the right tools, freedom, and collaborative environment to succeed and achieve your biggest goals. Competitive Package: Enjoy a competitive salary and stock options Growth Trajectory: Thrive in an environment of rapid change, constant challenges, and endless opportunities. You'll work closely with leadership in a culture that values courage, appreciation, and kindness. Comprehensive Benefits: Enjoy a benefits package designed to support your needs and wellbeing - including generous PTO, and employee healthcare, vision and dental. Flexible Remote-Working Environment: Work remotely in a team that prioritises flexibility, transparency, and collaboration. We're tackling big challenges in advertising technology by creating our own ecosystem - not copying what exists. If you're excited to innovate, build meaningful partnerships, and grow at a rapidly scaling company, we'd love to hear from you - let's build something extraordinary together!

Job Description Operations: · Monthly inventory of packaging – understand the run rate of all package requirements so packaging is always at optimum levels and does not run out. · Order all packaging from prescribed vendors. · Manages finished goods inventory at a high level of accuracy. Using warehouse management software, manages the location of inventory to ensure proper stock rotation, smooth order picking, and staging activities. · Ensure the business is always on top of packaging by consistently reviewing stock. · Ensure stores have their packaging pars. · Develops and implements plans for facility modification, such as equipment purchases or changes in space allocation and warehouse design in order to optimize packing system. · Coordinate warehouse activities with other plant departments, such as Production, Facilities, & Sanitation. Administration · Oversee warehousing’s employee interactions with ADP (HR/Payroll provider) 1. confirm employee punches, 2. approve PTO, 3. approve supervisor’s drafts of employee’s weekly schedule, 4. approve and adjust employee scheduling as required by business, 5. register new employees in ADP system including clock-in and out hardware Packer Management: · Lay out a plan for recruiting the right packers. · Recruit and interview packers. · Responsible for all packers’ schedules, shift covers and holiday cover. · Ensure all packers paperwork is legal and cross checked by Admin & Ops Support. · Ensure all packers inducted to Orwashers standard. Sales Sampling: · Confirm and document sample requests from sales team · Coordinate inventory with Logistics and production team · Plan packing of sample set with Frozen packing supervisor or lead · Over see all samples are sent according to Orwashers standard including all packaging, labels and promotional materials as required · Maintain inventory of packaging supplies · Manage the courier service and ensure sample sets logistical timing is communicated to members of the sales team Q/A & Compliance Documentation · Check product Daily to insure it meets standards outlined in corresponding Spec sheets · Ensure all product is handled safely and in accordance with GMP’s (Good Manufacturing Practice) · Ensure all Employees adhere to GMP’s and standards outlined in Orwashers training programs · Document and report all product that does adhere to company standards to appropriate managers · Assist in the documentation of new product creating specs (weight, dimensions, color and labeling) · Ensure all Daily pre-op inspection forms are completed and inspected (Daily) · Maintain multiple temperature logs (Daily) · Maintain Finished goods baking temperature log (Daily) · Maintain weekly blade inspection log · Other environmental testing Essential Functions: · Able to lift 30+ lbs. · Fluent in both written and spoken English. Conversational Spanish a big plus. · Demonstrates positive leadership characteristics, which inspire team members to meet and exceed standards. · Ability to utilize traditional software programs such as Gmail, Microsoft Office (Word, Excel, Outlook, and PowerPoint), POS systems, and any additional systems as needed; · Ability to access and accurately input information using a moderately complex computer system · Attends mandatory meetings including staff meetings, leadership meetings, etc. · Polished personal presentation; Grooming meets Company standards, as outlined by Employee Handbook. · Communicates information effectively and efficiently. · Able to work nights, weekends and holidays, and variable schedule, per the needs of the business. · Ability to walk, stand, and/or bend continuously and for extended periods as required to perform essential job functions. · Ensures that all staff are compliant with Company’s policies and procedures, as well as city, state and federal laws · Participates in community events and ensure corporate social responsibility goals of Company are met · Complete other duties as assigned by VP of Operations / Owner. · Maintains knowledge by attending educational workshops, reviewing professional publications, establishing personal networks, benchmarking state-of-the-art practices, and participating in professional societies · Ability to perform essential job functions under pressure, maintain professionalism when working under stress. work experience requirements • 2+ years experience as a Manager, • 2+ years experience in frozen packing, • Must have experience with cold chain education requirements • High school diploma or GED In 2007, Mr. Orwasher sold the bakery to Keith Cohen, who stated plans to expand the bakery's offerings beyond Eastern European breads, adding artisanal breads from Italy, France, Ireland, and the United States. Since then, Keith and his team have worked hard to respect the brand's rich history while incorporating a distinctly current point of view. As part of this evolution, they have partnered with regional farmers for raw materials, are working with local wineries to create their starters and have developed a new line of contemporary artisan breads to satisfy today’s palates. We are grateful for the rich history and loyal patrons that have brought Orwashers this far and look forward to baking great bread for many more decades to come. Though our heritage is one of transformation and innovation, one thing will never change: Orwashers’ commitment to doing what is right. Our relentless pursuit for making ethical choices at all times is what has built trust in Orwashers—from our guests, business partners, and colleagues.OUR STORY\r\nOrwashers Bakery is a New York City Institution. Founded in 1916 by Hungarian immigrant Abraham Orwasher, the bakery began as a small store in the Upper East Side. It was born out of a desire to serve local immigrant community members and focused on the high-quality rye, black, and grain breads that reflected the traditions of his homeland. It soon became a thriving wholesale business with deliveries being made by horse and buggy. Abraham's son Louis would go on to take over the business from his father, owning the building the bakery was housed in. Louis would go on to perfect the formulas of his father, while reinventing the bread sold. It is claimed that it was Louis who invented raisin pumpernickel bread, at Orwashers during World War II.\r\n\r\nIn 2007, Mr. Orwasher sold the bakery to Keith Cohen, who stated plans to expand the bakery's offerings beyond Eastern European breads, adding artisanal breads from Italy, France, Ireland, and the United States.\r\n\r\nSince then, Keith and his team have worked hard to respect the brand's rich history while incorporating a distinctly current point of view. As part of this evolution, they have partnered with regional farmers for raw materials, are working with local wineries to create their starters and have developed a new line of contemporary artisan breads to satisfy today’s palates. We are grateful for the rich history and loyal patrons that have brought Orwashers this far and look forward to baking great bread for many more decades to come.\r\n\r\nThough our heritage is one of transformation and innovation, one thing will never change: Orwashers’ commitment to doing what is right. Our relentless pursuit for making ethical choices at all times is what has built trust in Orwashers—from our guests, business partners, and colleagues.

Job Description The Rallye Motor Company, Long Island's premier luxury automotive group, has an opportunity for an experienced Service Advisor with Rallye BMW! The ideal candidate is looking for a long-term position with an outstanding team, who is able to influence the volume of the service business and plays a key role in ensuring a seamless and personalized automotive experience. Must be an energetic, reliable, motivated individual with at least 3 years of automotive service advisor experience. BMW/German Vehicle Advisor experience strongly preferred. Responsibilities for this position include: • Establish ongoing consulting relationships with customers by being available during business hours to answer questions, explain additional repairs needed, and make arrangements for subsequent service reservations., • Promote the sales of appropriate services, parts, and accessories by accurately identifying the customer's service needs and by thoroughly understanding the BMW product and service lines., • Establish working agreement with the customer by determining and verifying customer's service needs and recording them along with current vehicle and customer information on the repair order (phone numbers such as home, office, fax, pager & cellular phone.) Also, record the initial estimate signatures and verify the location of the customer so that no work starts without customer approval., • Ensure all customer vehicle damages have been accurately identified on the check-in sheet. Aide in the inspection of the vehicles to accurately identify customer service needs, so the number of comebacks related to improper repair orders is minimal., • Coordinate with the Service Manager, Shop Dispatcher, Shop Foreman, and other service personnel in order to communicate with customers and technicians regarding repair work. Determine time of completion., • Advise customers of early or late delivery, or of any additional repairs. Ensure delivery of vehicles to customers when work is completed., • Balance workload, repair orders distributed equally based upon technicians skill and efficiency. PAY RANGE: $120,000 - $150,000 ANNUALLY (PAY CONSISTS OF SALARY AND COMMISSION) Requirements • Must have 3 years of automotive service advisor experience., • Must be fluent in Mandarin, • BMW/German Vehicle Advisor experience strongly preferred., • Valid Driver's License., • Excellent customer service skills., • Working knowledge or trainable in automotive retail center computer systems (CDK computer system preferred)., • Excellent verbal/written communication and organization skills., • Outgoing and patient personality with outstanding customer relations ability., • Competitive pay plan!, • Great benefits package including medical, dental and vision coverage for employee & family!, • Company paid life insurance and optional additional coverage., • Voluntary short term and long term disability available., • Additional voluntary benefits including Aflac and LegalShield!, • Paid time off!, • Paid holidays!, • 401K plan., • Employee Assistance Program.

Job Description ABOUT ORGANOX: OrganOx is an innovative, fast-paced, global medical device company with a mission to save lives by making every donated organ count. We are a commercial stage organ technology company, spun out of the University of Oxford in 2008, committed to improving transplantation outcomes throughout the world. The company’s first product, the OrganOx metra® normothermic machine perfusion (NMP) system for liver transplantation, has been used to support more than 5,000 liver transplant operations globally. Position Summary The Product Quality Engineering team at OrganOx is a technical quality engineering team responsible for monitoring, understanding, and improving product performance of the OrganOx Metra, a Class III medical device. The Product Quality Engineering team works closely with Product Sustaining Engineering and Contracted Suppliers to set in place quality control and management processes for externally built products and componentry, including sterilization and microbiology, supplier management, and contract manufacturing processes. The Product Quality Engineer will have strong hands-on technical skills with an ability to analyze product quality issues and work cross-functionally to solve problems related to product quality. The successful candidate is collaborative, has excellent communication and problem-solving skills, and is passionate about delivering world-class products that make healthcare more accessible, simpler, and safer. Listed below are the major responsibilities of the role and a brief description of some of the key tasks to be performed. This list is not totally exhaustive. This is a flexible, on-site role in our Madison, NJ office. Major Responsibilities Under direction from the Senior Product Quality Engineer and Senior Manager, Product Quality Engineering, the Product Quality Engineer may be responsible for the following: • Lead root-cause investigations in response to customer complaints, • Analyze and trend on product performance data to provide recommendations for product improvements, • Raise Supplier Corrective Action Reports (SCARs) in response to product performance trends. Support timely closure of SCARs., • Work cross-functionally with other engineering teams and contracted suppliers to implement changes in manufacturing and inspection procedures to mitigate field failures., • Participate in the development and review of engineering change orders that impact product quality activities, • Perform DHR, Service History record, and PFMEA reviews in support of complaint investigations. Skills and Experience • Experience investigating and resolving SCARS and CAPAs, • Strong experience with statistical analysis of data; Experience with Minitab preferred, • Experience with Six Sigma principles preferred, • Excellent oral and written communication skills with the ability to communicate with audiences of varying technical skills, • A strong ability to prepare written technical plans and reports in support of engineering changes, product or process validations, and failure investigations, • Strong focus on meeting customer needs, • Proven ability to work cross functional and within global teams, fostering a culture of high collaboration, • Ability to be self-driven and solve complex problems independently. Committed to upholding OrganOx values in daily work and decision-making, • Experience in driving a global quality mindset across teams and geographies, • Demonstrated strong attention to detail and “do it right the first time” attitude Qualifications • Excellent technical report writing skills are required, • Strong Root Cause Analysis, Design of Experiments, and Test Method Development experience as related to complaint investigations is required, • Strong experience with MS Office Products (Word, Excel, Visio, Project, PowerPoint, Outlook, etc.) is required, • Prior experience performing complaint investigations preferred, • A solid understanding of the FDA QSR Quality System Requirements, and the ability to apply the knowledge to comply with goals and objectives is highly preferred, • Knowledge of electro-mechanical troubleshooting techniques is preferred, • Familiarity with ISO14971 and associated Risk Management Processes is a plus, • Six Sigma Green Belt or Black Belt Certification preferred, • Ability to travel 10-20% (domestically and internationally) #LI-Hybrid A job description does not imply that the duties stated are the only ones to be performed by the job holder. Job holder will be required to follow any other job-related instruction as reasonably requested by their line manager or their designate. Benefits The Pay Range for this position is $105,000 - $115,000 annually, with a 10% target annual bonus and benefits. At OrganOx, We offer competitive compensation and comprehensive benefits available from day one, including health, dental, vision, disability coverage, and flexible spending accounts. Additionally, we offer a 401(k)-retirement plan with company matching after 90 days, paid time off, holidays, and additional leave benefits, as well as employee discounts and access to our onsite wellness facility. OrganOx supports work-life balance and provides opportunities for ongoing professional development. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.

Job Description We are currently seeking a Network Engineer with a minimum of 3 years of hands-on experience. As a Network Engineer, you will be a part of a project. This position is on site in NYC from 4PM -12 AM. Required Skills Must have hands-on experience with: * • Routing protocols EIGRP, OSPF, and BGP; configuring, troubleshooting, typical show commands to research issues., • Racking and stacking Cisco 2900, 3700, 3600, 3800, 4500, 6500 series switches., • Upgrading firmware on Cisco switches., • Tools for upgrading firmware on Cisco switches; TFTP and FTP server, thumb drive., • Configuration of Cisco switches in command line via console and SSH., • Working knowledge of Cisco Catalyst linecards; multi-gig copper and fiber cards, supervisors., • Deep understanding of Layer 1 concepts, configuration, and troubleshooting; typical show commands for verification of copper and fiber link status, quality of connection, expected transmit and receive light levels, interface counter types that indicate connection trouble, copper test and show commands to indicate cable short, media types., • Working knowledge of Power over Ethernet; verification of power being provided to devices, PoE power budget on a switch., • Deep understanding of Layer 2 concepts, configuration, and troubleshooting; spanning tree, root bridge, BPDU, designated ports, root ports, trunk and access ports, rapid spanning tree, ieee, MST, VLAN, Layer 2 extension, CDP, LLDP, MAC address, CAM and TCAM table, DHCP snooping., • Deep understanding of Layer 3 concepts, configuration, and troubleshooting; routed ports, switched virtual interface, ARP table, ARP inspection, ARP access-control list, IPv4 access-control list, ping, traceroute., • Deep understanding of first-hop redundancy protocols; HSRP, GLBP, VRRP., • Deep understanding of IPv4 addressing, variable length subnet masks, summarization., • Fiber plant management; installing fiber patch cords, troubleshooting link issues, working knowledge of multi-mode and single-mode fiber cabling., • Copper plant management; installing CAT5/5e/6 patch cords, 568A/B termination, knowledge of straight through, cross-over, rollover cabling, usage of a tone generator and tracing copper cabling from Location A to Location Z., • Working knowledge of Cisco fiber transceiver types; SFP, SFP28, QSFP; and wavelength types; 850nm, 1310nm, SX, LX, SR, LR, LR4, 1-gig, 10-gig, 25-gig, 100-gig., • Working knowledge of network and server racks; Mighty Moe, shelves, rails, cable routing., • Working knowledge of power distribution units (PDU); Tripp-Lite, Raritan Power, APC; and power cord types; twist-lock L6-20, L6-30, C12, C13, C14., • Working knowledge of uninterruptible power supply (UPS) units; Schneider Electric, Emerson Power, APC; replacing batteries, connecting units to the network, power input and output types; L6-20, L6-30., • Working knowledge of networked console servers; Tripp-Lite, Avocent., • Working knowledge DNS and DHCP; What is a host record, reverse look-up zone, CNAME. What is a static IP address. hands-on experience with the following is a plus : * • Cisco Catalyst 6800, 9300, 9400, 9500 series switches., • Arista EOS 7280, 7504 series switches., • Spine-leaf architecture., • VxLAN concepts; Understanding what VNI's and VTEP's do, verification and research of host routes in EVPN tables., • Redistribution of routing protocols; EIGRP to BGP. Founded in 1998, Lincoln Computer Services is a growing custom IT solution provider, servicing New York City and Long Island, New York. If you are interested in working for a growth-oriented company with a culture that exudes collaboration, integrity and a passion for technology, submit your resume today! Powered by JazzHR Goh2Qp1KkH

Job Description CarGuys Inc. -America’s #1 Automotive Recruiter If you are looking for a new career in the car Biz CarGuys Inc. is the go-to company to assist you. We work with dealerships that are looking to hire, all across the country. Anytime you are looking to find a new career…contact us, CarGuys Inc. to assist. We help dealers to hire, from porters all the way up to CEO’s Currently we have a dealership in your area looking to hire an Automotive Used vehicle Inventory Buyer. Responsibilities: * Sourcing and acquiring the best possible used cars for the dealership * Work closely with our team to identify the best vehicles to add to our inventory * Negotiate deals with sellers, and handle all the necessary paperwork. The ideal candidate will: * Have a strong understanding of the used car market and be able to use their expertise to find the best deals on high-quality used vehicles * Have excellent negotiation and communication skills * Be able to work well both independently and as part of a team. We offer competitive compensation packages and benefits, as well as a supportive and collaborative work environment where your skills and experience will be valued. If you're passionate about the automotive industry and have a proven track record of success as a used car inventory purchaser, we want to hear from you! Contact us today to learn more about this exciting opportunity to join our team! Skills:Used cars, Inventory management,Vehicle sourcing,Negotiation,Market analysis,Purchasing,Automotive industry,Dealership,Sales strategy,Customer satisfaction,Vehicle appraisal,Vehicle history reports,Inspection,Auctions,Pricing strategy, VAuto, Wholesale, Carfax, Used vehicle Buyer, Car buyer, Inventory manager, Inventory acquisition, inventory acquisition management, automotive buyer, automotive car buyer, used vehicle buyer. *You are applying through Car Guy’s Inc, America’s and Canada’s #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of the complete part-specific process by effectively translating the customer’s requirements to the company and suppliers, and adhering to the Quality Management System, all applicable regulations, and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Manages all aspects of the part-specific process, including resource planning, project timelines, and establishing priorities to ensure customer requirements and quoted standards are met., • Evaluates and improves process documentation protocols for engineering and manufacturing, as well as creates, updates, and maintains the item masters, bills of material, and routers, etc., • Reviews requests for quotes (RFQs) and helps determine the feasibility of projects, estimates labor and related costs, and prepares formal quotes for submission to customers., • Teams with customers to review designs for manufacturability and to understand the functionality of the part and its features, adds specifications as needed, and verifies GD&T was properly applied., • Clarifies, confirms, and correlates acceptance criteria with customers, company, and suppliers., • Develops manufacturing methods for new and existing projects by reviewing customer specifications and quality agreements, adhering to all applicable requirements, and effectively translating them into instructions., • Performs initial sourcing and qualifies suppliers from a technical perspective, as well as effectively communicates the customer requirements through training and auditing of the supplier’s performance on a regular basis., • Ensures product quality through the development and implementation of complete quality plans including CMM programming, gage design and procurement, and inspection plans., • Coordinates and/or performs validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process as required., • Teams with the CNC Engineer to design work-holding devices and tooling as needed to ensure the desired outcome., • Investigates root cause of customer and/or supplier rejections and internal quality failures, dispositions non-conforming parts, recommends and implements effective corrective action as required, and provides accurate and timely responses to customers., • Determines the impact of ECNs on bills of material, routing, and spares, and coordinates any change., • Leads the post-production review and evaluation of the part-specific process, including equipment performance and product quality, recommends improvements, and coordinates their implementation., • Provides direction and on-the-job training to engineering and production associates regarding manufacturing methods and practices, as well as recommends, develops, and implements complete training programs, including materials and assessments., • Champions lean manufacturing principles by encouraging lean thinking in all aspects of development and production, as well as conducting and/or coordinating training and implementation with managers and associates., • Understands and complies with company policies, safety guidelines, quality system procedures, and housekeeping standards.Additional Duties and Responsibilities:, • Program, troubleshoot, and manage the Universal Robots arms., • Oversee the fixture designs, programs, prove outs, operation, and maintenance of the automated blasters., • Identify opportunities for automation within the organization and develop solutions to enhance productivity., • Collaborate with various departments to implement automation projects., • Ensure all automated systems comply with safety and quality standards., • Provide training and support to staff on the use of automated equipment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree from a four-year college or Manufacturing Engineer Certification and 8-10 years related experience and/or training; or equivalent combination of education and experience. Required Skills, Knowledge, and Abilities: • Ability to read, write, and speak English. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Experience with computer applications, including word-processing, spreadsheets, graphs, databases, CAD, and presentations., • Experience with process capability, Gage R&R, and statistical techniques., • Experience in using basic and advanced measuring tools and equipment., • Applied knowledge of Geometric Dimensioning & Tolerancing (GD&T)., • Capable of working independently as well as collaborating and coordinating efforts with colleagues., • Ability to establish priorities and manage multiple activities and requirements in a changing, fast-paced environment., • Experience with manufacturing materials, manufacturing processes, and secondary processes., • Project management skills.Desired Skills, Knowledge, and Abilities:, • Advanced metrology (CMM programming, vision system, etc.)., • Lean/Six Sigma. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR gdadFPpwmr

Job DescriptionDescription: Field Inspector-New Jersey Department: Underwriting Reports to: Manager of Classification and Inspection Location: Hybrid Job Summary: As a Field Inspector in the Underwriting Department, you will be responsible for conducting physical inspections of New Jersey employers and gathering information on business operations. You will prepare detailed, accurate reports that are used to establish the propriety of the classification schedule used on the employer’s workers compensation policy. The territory includes, but not limited to Northern New Jersey counties (Essex, Hudson, Middlesex and Union). NJCRIB has flexible work-from-home schedules and offers great benefits to include: • Generous leave time, including vacation, sick, and flexible floating holidays, • NJ State Pension Plan, • Medical/prescription coverage, • FREE dental coverage, • Strong ability to multitask and work in a team environment, • Excellent communication skills including active listening, • Excellent verbal and written communication skills, • Highly proficient in Microsoft Office Suite or related software programs, • Proficient computer skills with the ability to learn new software, • Extremely well organized with great attention to detail, • Service-oriented able and to resolve complex issues, • Ability to learn quickly and creatively solve new problems, • Ability to work independently with minimal supervision Essential Job Functions: • Independently scheduled inspections with employers to review operations and employment, • Submit comprehensive inspection reports representing the employer’s operational processes and employment, • Collaborate with team members and management to address specific inquiries related to an employer’s operations, • Attend internal, industry, and training meetings as required, • Provide weekly report of completed work and travel reimbursement requests, • Perform other activities, as directed Education and Experience: • High school diploma or equivalent required; a college degree in business, insurance, risk management, or a related field is a plus, • Certification or coursework in insurance, underwriting, risk management, or occupational safety preferred, • Knowledge of industrial machinery, equipment, raw materials, and manufacturing/fabricating processes, • Familiarity with workers’ compensation insurance, underwriting guidelines, or related regulatory standards is a plus, • Prior experience in field inspecting, underwriting support, or other related industry experience preferred Physical Requirements: • Frequent driving, standing, walking, bending, reaching overhead, extension, • Frequent handling of paperwork and computer equipment, • Must be able to push/pull, open/close file cabinet/desk drawers, • Must be able to lift 15 pounds at times, • Must be able to physically inspect property, • Must be able to travel as directed within New Jersey to perform audits/inspections Additional Requirements • Must have current driver's license and current automobile insurance, • This position requires use of your personal vehicle, • Mileage is reimbursed at current IRS rates The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel with this job title. The responsibilities associated with this job may change in accordance with business needs. The employee may be required to perform additional and/or different responsibilities from those set forth above. All qualified applicants will receive consideration for employment without regard to race, national origin, gender, age, religion, disability, sexual orientation, gender identity, veteran status, marital status or any other characteristic protected by law.

Job DescriptionDescriptionOverview The New York Public Library (NYPL) is a free provider of education and information for the people of New York and beyond. With 92 locations—including research and branch libraries—throughout the Bronx, Manhattan, and Staten Island, NYPL offers free materials, computer access, classes, exhibitions, programming, and more to everyone from toddlers to scholars, and has seen record numbers of attendance and circulation in recent years. NYPL serves more than 18 million patrons who come through its doors annually and millions more around the globe who use its resources at . The Environmental Health and Safety (EHS) Analyst will have overall responsibility for assisting the Environmental Health and Safety Director with protecting the health and safety of all NYPL staff, patrons, and visitors. The primary focus of the EHS Analyst will be to ensure the upkeep of equipment related to the Emergency Cardiovascular Care (ECCP) program and perform management and inventory for our PPE distribution program. This position will require frequent travel throughout New York City, including the Bronx, Manhattan, Queens, and Staten Island. The position also requires diligent recordkeeping and other administrative duties related to maintaining the NYPL Health and Safety Program. We are looking for someone we can count on to: Own: • On-site equipment inspections of NYPL’s Automated External Defibrillator (AED) inventory and first aid kits and administrative support, • Onsite EHS inspections, documentation, communication, and presentation of inspection data to the EHS Director and other team members in a timely manner, • Assist OEHS in performing annual roof and parapet site inspectionsTeach:, • Staff to identify potential health and safety hazards, how to report them, and how we can help them mitigate those hazardsLearn:, • How the Office of Environmental Health and Safety interacts with other divisions and departments, • How to mitigate identified and potential hazards, • The unique operations and potential hazards that exist within the library systemImprove:, • Understand how the library is organized and physically laid out, • Understand the specific goals and role of the Facilities and Environmental Health and Safety team in relation to other departments, • Learn how we perform inspections and assessments of Library branches and other sites3 months, this person will:, • Perform fundamental inspections and assessments independently, • Have a firm understanding of our Emergency Cardiovascular Care Program and assist in managing it, • Understand the health and safety training matrix6 months and beyond, this person will:, • Perform in-person health and safety training sessions for staff, • Perform advanced inspections and assessments independently, • Manage assigned projects independentlyResponsibilities, • Assist with the administrative functions of the AED program such as working with NYPL’s training vendor, scheduling staff training sessions and coordinating room bookings, • Perform site safety, annual roof and parapet and other required site inspections, • Conduct ergonomic assessments and other assignments as needed in support of the Office of Environmental Health and Safety, • Respond to employee Environmental Health and Safety related complaints, • Assist with investigating employee injuries and incidents, • Perform chemical Safety Data Sheet (SDS) reviews and database management, • Bachelor's Degree in industrial hygiene, occupational health and safety, environmental science, engineering, or a related field or 4+ years of additional related experienceRequired Experience, • 2+ years of experience in an environmental science, occupational health and safety, industrial hygiene or a related fieldRequired Skills, • Strong ability to handle multiple assignments and meet deadlines, • Strong interpersonal and verbal/written communication skills, • Strong organizational and analytical skills, • Strong computer skills with experience using Microsoft Office and/or Google Suite, • Ability to work both independently and collaboratively, • Be Helpful to patrons and colleagues, • Be Resourceful in solving problems, • Be Curious in all aspects of your work, • Be Welcoming and InclusiveWork Environment, • Public library setting, • Outdoors, • Office setting, • Active construction sites Physical Duties, • Travel between NYPL locations throughout Manhattan, the Bronx and Staten Island, • Lifting up to 25 lbs. of equipment, standing, sitting, climbing ladders, and other physical duties associated with safety inspections may be requiredPre-Placement Physical Required?, • NoUnion/Non Union, • Non-UnionFLSA Status, • ExemptSchedule, • 40 hours per week, • On-site 5 days per week, • Monday through Friday, 9:00am-5:00pmThis job description represents the types and levels of responsibilities that will be required of the position and shall not be construed as a declaration of all of the specific duties and responsibilities for the role. Job duties may change if Library priorities change. Employees may be directed to perform job-related tasks other than those specifically presented in this description as needed. The New York Public Library Salary StatementAt the Library, we believe that pay transparency and pay equity are important to ensuring we source the best candidates and keep the best employees. When making a determination as to the appropriate salary for a candidate, we consider a variety of factors such, including, but not limited to, the position requirements, the skills, prior experience, and educational background required or preferred for the job, the scope and impact of the role within the organization, internal peer equity, and the candidate's specific training, experience, education level, and skills. No single factor is conclusive; the Library reserves the right to consider any and all relevant factors and make a decision consistent with its policies.

Job Description InstaCare EMS is seeking new and experienced Paramedics to work from our Brooklyn Base located in Coney Island. WHY WORK WITH INSTACARE EMS: • $1000 Sign-On Bonus for Full-Time Employees, • Flexible Schedules, • Weekly Paychecks, • Paid Time Off, • Professional Work Environment, • Friendly, Dedicated Coworkers EMT-Paramedics must possess current: • New York State Certified EMT Paramedic Card, • REMSCO/REMAC Paramedic Certification, • New York State drivers license (if required) The duties of the crew include but are not limited to: Arrival for tour of duty: The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage ‑ the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty ‑ the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance ‑ none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients. Additional Responsibilities: • Completes required in service training., • Maintains state and local certification., • Inventories and services ALS supplies and drugs in accordance with applicable local, state and federal regulations., • Ensures that the assigned ambulance is equipped in accordance with applicable regulations., • Performs ALS patient care in accordance with regional and state protocols., • Records patient care on proper forms. Notice: EMS agencies in NYS are required by law (Executive Law Section 837-s) to check applicants (who may be involved in the care or transportation of patients) personally identifying information against the Sex Offender Registry and make a determination of eligibility to become a member/employee pursuant to Correction Law Article 23-A InstaCare EMS is proud to be an Equal Opportunity Employer. InstaCare EMS does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Powered by JazzHR vfrnoxHnlO

Job Description SUMMARY Runs an efficient and profitable service department through productive staffing, customer retention, cost controls, achievement of objectives, and maintenance of all service records. Ensures that the daily inventory of technician's time is consistently sold to service customers. ESSENTIAL DUTIES include the following. Other duties may be assigned. Forecasts goals and objectives for the department and strives to meet them. Hires, trains, motivates, counsels, and monitors the performance of all service department staff. Prepares and administers an annual operating budget for the service department. Maintains reporting systems required by general management and the factory. Attends managers meetings. Monitors and controls the performance of the department using appropriate reports, tracking systems, and surveys. Strives for harmony and teamwork within the department and with all other departments. Develops and implements a marketing plan which promotes new and repeat business. Understands, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Understands and ensures compliance with manufacturer warranty and policy procedures. Accounts for all documents; ensures that none are missing and all are processed correctly. Holds weekly department meetings. Directs and schedules the activities of all department employees. Facilitates and/or conducts technical training and sends employees to appropriate training schools as needed. Monitors technicians' daily productivity reports and corresponding payroll records. Monitors and follows up on parts orders with the parts manager to ensure availability. Initials all repair orders before submitting them to the warranty department, monitoring for sales and hours relative to expectations. Establishes and maintains good working relationships with customers to encourage repeat and referral business. Informs repair technicians of time allowances on each repair order. Maintains high-quality service repairs and minimizes comebacks. Conducts periodic spot checks of completed jobs for thoroughness and quality. Keeps abreast of new equipment and tools available and recommends purchases. Ensures that the work areas and customer waiting area are kept clean. Establishes and maintains good working relationships with vocational and technical schools to enhance personnel recruitment activities. Serves as liaison with factory representatives. Ensures the proper care, storage, and inventory of special tools. Ensures that customers' service files are up-to-date and readily available for reference. Ensures that all customers are greeted promptly and given fair estimates on costs and time required for repairs and maintenance. Ensures all jobs are closed immediately. Prepares pricing guides and maintenance menus for frequent labor operations. Handles customer complaints immediately and according to dealership's guidelines. Establishes and maintains 24-hour follow-up with all customers to confirm satisfaction with the service experience. Maintains safe work environment. Maintains a professional appearance. SUPERVISORY RESPONSIBILITIES All Service Department Personnel QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High School Diploma 10 years of service department work LANGUAGE SKILLS English CERTIFICATES, LICENSES, REGISTRATIONS State Inspection License Commercial Drives License PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to perform truck repairs when necessary. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job DescriptionQuality Control Microbiology Analytics I, II, III QC Microbiology Analyst I The Quality Control Microbiology Analyst I serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst I will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. • Environmental monitoring in controlled environments: Non-viable particulate monitoring; Active viable air monitoring, Personnel monitoring, Surface sampling, Passive air monitoring, • Equipment monitoring: Ensure equipment is in proper working conditions; Ensure all equipment is properly; maintained/calibrated; Assist with routine laboratory testing; Plate reads and incubations, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required; Minimum 0-2 years of experience or equivalent experience. Environmental monitoring or within the biopharmaceutical industry experience preferred., • Proficient with computer software such as; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Trained in GxP/GDP, Safety, • The QC Microbiology Analyst I must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst II The Quality Control Microbiology Analyst II serves as a support role to clinical and commercial production. Microbiology Analyst II will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology., • Environmental monitoring in controlled environments; Non-viable particulate monitoring, Active viable air monitoring Personnel monitoring, Surface sampling, Passive air monitoring, • Equipment monitoring; Ensure equipment is in proper working conditions, Ensure all equipment is properly maintained/calibrated, Program equipment with proper workflows, Assist with routine laboratory testing, Plate reads and incubations, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP), • Writing/conducting investigations pertaining to environmental monitoring and testing, • Develop and train QC Microbiology Analyst I personnel on relevant business processes.REQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 2-4 years of experience with environmental monitoring or within the biopharmaceutical industry., • GxP/GDP, Safety Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical training ability, • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst III The Quality Control Microbiology Analyst III serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst III will coordinate data for batch release, participate in project/client meetings, and author/revise environmental monitoring procedures. Additionally, the QC Microbiology Analyst will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring., • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Analyst II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work ordersREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • GxP/GDP Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, Microsoft Visio (preferred), Netsuite (preferred), Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityWorking Environment, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityPhysical Requirements, • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be physically capable to stand; walk; site; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hear., • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator.Please note these job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDirector of Commercial Analytics FLSA Status: Exempt Job Class: Non-Billable EEO Job Category: (2) Professional About the Role: The Director of commercial analytics is a cross-functional leader responsible for driving sustainable revenue and margin growth through intelligent, data-driven pricing strategies and scalable business analytics. They will oversee a team that serves as a center of excellence for client services, supporting complex project proposals, developing standardized pricing frameworks, and delivering best in class client deliverables. The sales delivery office will serve as a critical bridge between finance, operations, and client services—ensuring consistent pricing practices, operational efficiency, and data-backed decision making. Additionally, this leader will analyze internal data to shape company initiatives and support the CFO with key financial performance metrics, while also delivering strategic insights and enabling performance tracking across business lines. This is a highly visible role requiring a mix of financial acumen, operational expertise, and leadership in cross-functional collaboration. The Director of commercial analytics reports directly to the Vice President of Sales and works closely with the CFO. Responsibilities: Leadership & Management • Manage and mentor a team of project managers dedicated to pricing strategy and client deliverables., • Drive a culture of collaboration, transparency, and data-informed decision making across departments including Sales, Field Operations, Finance, and Executive Leadership., • Lead development and execution of a company-wide pricing strategy that balances profitability, competitiveness, and value delivery., • Define and maintain standardized pricing bands based on client size, building type, market conditions, and strategic account value., • Serve as strategic partner to the Key Accounts team by creating and managing account-specific pricing models for large portfolio clients., • Build and manage comprehensive analytics tools to deliver actionable insights across all business lines., • Leverage data to improve pricing intelligence, drive pricing consistency, and enhance decision-making across Sales and Field Operations., • Forecast market size, opportunity, and account potential to inform strategic planning and business development efforts., • Support Senior Leadership with financial modeling, scenario planning, and revenue forecasting to shape long-term strategy., • Partner with cross-functional teams to allocate consulting resources effectively, maximizing revenue potential and client impact., • Provide strategic financial support to the Key Account organization and senior leadership team through customized reporting, pricing analysis, and go-to-market strategy insights., • Continuously improving pricing tools, processes, and governance to ensure scalability and alignment across the organization., • 8+ years of experience in pricing strategy, financial analytics, or business operations, • Strong track record of leading pricing strategy and analytics in a B2B environment., • Deep understanding of financial modeling, margin analysis, and profitability management., • Demonstrated ability to translate data into strategic recommendations and operational improvements., • Experience designing and implementing business intelligence tools and dashboards (e.g. Power BI, Tableau), • Strong leadership, communication, and stakeholder management skills; comfortable interfacing with executive leadership and cross-functional teams., • 3-5 years in the vertical transportation industry., • MBA or Master’s in Finance, Economics, or a related field., • Previous experience in strategic pricing for large portfolio accounts or multi-site clients. EEO/AA Employer/Veteran/Disabled Statement: VDA provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. VDA is the global leader in vertical transportation consulting and inspection services. We’ve helped clients with their vertical transportation needs since 1980. Our expertise and services impact the design, reliability, lifespan and safety of vertical transportation equipment.

Job Description Overview Company Overview: Harvard Protection Services is one of the fastest growing, privately owned provider of high-quality security services in the United States. We are an industry leader and are well known for our innovative thinking and entrepreneurial spirit. Our People are at the center of our Core Values and as a family organization, “we promote respect and embraces diversity.” Our Fire & Life Safety Directors support Harvard Protection in our goal of providing best in class security and life safety services. Our FSD’s are responsible for providing professional customer-focused security and life safety services for the people and the property they protect and the staff that they may lead. Responsibilities • A true Leader position, • Maintain a professional demeanor while leading staff and aiding customers, employees, visitors, and guests, • Maintain a visible presence in the facility / building assigned, • Monitor the environment, with the ability to detect suspicious and unsafe activity, • Responsible for becoming familiar with incoming and outgoing traffic, know the customers, tenants, visitors, and guests, • Answer all phones in a professional manner and demonstrate ability to perform clear and audible announcements, • Permit authorized persons to enter property and monitor entrances and exits, • Know the facility / building policies and procedures, and enforce them within the limits of the position, • Follow established emergency action planning, procedures, fire protection, and safety standards, • Monitor alarms and systems as required, • May perform operations related functions to include; scheduling, overtime management, review of daily logs and incident reports, training and development of staff, as required, • Test and inspect fire extinguishers and other fire protections devices to ensure compliance to fire and safety standards, • Discusses violations and unsafe conditions with site representative, • Prepares reports, such as inspections performed, standards violations, and recommendations for eliminating fire hazards, • Maintains records and logs, as required by law, • Maybe called upon to perform fire-fighting duties during emergencies, • May train others in fire emergency response plans, • Assists in fire drills, as required, • May perform other inspections, and safety duties as required, • May perform additional security services functions, as permitted under any required Security Officer license and as specified for the assigned site(s), in addition to Fire Inspector duties, • The essential duties and responsibilities may differ by customer location assigned Qualifications • State or municipality mandated security officer licenses, • Minimum High School Diploma, GED or the equivalent, • Must have Fire Safety Directors license, • Knowledge of or ability to learn fire inspection operations, and procedures, • Must have reliable means of communication and transportation, • Strong interpersonal communication skills, • Must have a security guard license or be able to obtain one within an acceptable period, • Previous contract security, law enforcement, fire department, military, customer service experience preferred, • Good organizations skills, • Strong interpersonal communication skills, • Write routine detailed correspondence, to include log entries, incident and reporting, • Ability to work in a fast paced, customer service environment, • Good time management skills and the ability to prioritize and problem solve, • Good computer skills including Microsoft Office

Job Description Midwood EMS is seeking new and experienced Paramedics to work from our Brooklyn Base located in Coney Island. WHY WORK WITH MIDWOOD EMS: • $1000 Sign-On Bonus for Full-Time Employees, • Flexible Schedules, • Weekly Paychecks, • Paid Time Off, • Professional Work Environment, • Friendly, Dedicated Coworkers EMT-Paramedics must possess current: • New York State Certified EMT Paramedic Card, • REMSCO/REMAC Paramedic Certification, • New York State drivers license (if required) The duties of the crew include but are not limited to: Arrival for tour of duty: The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage ‑ the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty ‑ the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance ‑ none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients. Additional Responsibilities: • Completes required in service training., • Maintains state and local certification., • Inventories and services ALS supplies and drugs in accordance with applicable local, state and federal regulations., • Ensures that the assigned ambulance is equipped in accordance with applicable regulations., • Performs ALS patient care in accordance with regional and state protocols., • Records patient care on proper forms. Notice: EMS agencies in NYS are required by law (Executive Law Section 837-s) to check applicants (who may be involved in the care or transportation of patients) personally identifying information against the Sex Offender Registry and make a determination of eligibility to become a member/employee pursuant to Correction Law Article 23-A Powered by JazzHR dnctIf0EUB

Job Description JOB DESCRIPTION Employee: Key Account Manager Architects & Designers FLSA Status: Exempt/Bonus Eligible Reports To: Director of Sales - GP Department: Global Projects Job Purpose:. The Key Account Manager will be responsible for calling on and managing the top international and regional Architects and Design firms specifying AXOR and hansgrohe around the world, maintaining the long-term relationship and maximizing sales opportunities. This role will expand global project sales, supporting regions grow their pipelines, close the buying circle, and improve conversion rates. Responsibilities • Define strategy and target customers for the USA, NY region; grow the pipeline and increase conversion rates, • Engage with global and local architect and interior design firms, • Take responsibility for execution, specification, and sales goals to meet annual growth objectives, • Ensure regular customer visits through a developed call cycle, • Develop and implement Key Account Plans to achieve monthly, quarterly, and annual targets, • Assist in developing tools for architects/designers to specify Hansgrohe products and update CRM (C4C), • Launch new products through events like lunch and learns or showroom presentations, • Minimum of 3 years sales experience, preferably in key account management or global projects, • Good understanding of Hansgrohe products and market, • Professional approach to key account, customer relationship management and good C4C skills, • Strong data analysis and reporting skills, • Effective communication of content, information, ideas, thoughts, and emotions, • Ability to change perspectives and understand others' needs, • Global mindset with strong collaboration skills and very good English proficiency (min. B2/C1) Strategic Thinking: Strategic approach to managing and nurturing relationships with allocated Key Accounts, Growing customer relationships Deep understanding of the channels business goals and how key accounts contribute to them Developing, activating, and maintaining professional Key Account plans Developing and maintaining a network of contacts within the customer's organization to understand their structure, dynamics, and decision-making processes. Being able to negotiate effectively to reach mutually beneficial agreements that satisfy both the organization's and the customer's objectives. Managing and resolving conflicts that may arise during the course of the relationship. Acting as an advocate for the customer within the organization to ensure their needs and expectations are understood and addressed. Customer Relationship Management: The ability to build, nurture, and maintain strong and trust-based relationships with key clients is fundamental. Skilled in interpersonal communication and understand the nuances of each client's business. International Interdisciplinary Skills: Proven ability to work effectively in a global, cross-functional team environment. Marketing: Effectively promote products, engage customers, and contribute to the overall efforts of the company. Technical/ Product Skills: Understanding of sanitary products, including their features, specifications, applications, and technical aspects Communication: The ability to communicate content, information, ideas, thoughts and emotions purposefully and to make oneself understood to others in a socially appropriate manner. Collaboration: Ability to work effectively with cross-functional teams and external partners. ADA - CHECKLIST FOR PHYSICAL ACTIVITIES & REQUIREMENTS, VISUAL ACUITY, AND WORKING CONDITIONS OF THE POSITION Position Title: Key Account Manager - Department: Global Projects 1. The physical activity of this position. (Please check all blocks that apply) ( ) A. Climbing. Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion. ( ) B. Balancing. Maintaining body equilibrium to prevent falling and walking, standing or crouching on narrow, slippery, or erratically moving surfaces. This factor is important if the amount of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium. (x) C. Stooping. Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full motion of the lower extremities and back muscles. (x) D. Kneeling. Bending legs at knee to come to a rest on knee or knees. (x) E. Crouching. Bending the body downward and forward by bending leg and spine. (x) F. Crawling. Moving about on hands and knees or hands and feet. (x) G. Reaching. Extending hand(s) and arm(s) in any direction. ( ) H. Standing. Particularly for sustained periods of time. ( ) I. Walking. Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. ( ) J. Pushing. Using upper extremities to press against something with steady force in order to thrust forward, downward or outward. ( ) K. Pulling. Using upper extremities to exert force in order to draw, haul or tug objects in a sustained motion. (x) L. Lifting. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires substantial use of upper extremities and back muscles. (x) M. Fingering. Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole hand as in handling. (x) N. Grasping. Applying pressure to an object with the fingers and palm. (x) O. Feeling. Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. (x) P. Talking. Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly. (x) Q. Hearing. Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. (x) R. Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers. 2. The physical requirements of this position. (Please check only one block) ( ) A. Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally and all other sedentary criteria are met. (x) B. Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. ( ) C. Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. ( ) D. Heavy work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. ( ) E. Very heavy work. Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move objects. 3. The visual acuity requirements including color, depth perception, and field vision. (Please check only one block) (x) A. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. ( ) B. The worker is required to have visual acuity to perform an activity such as: operates machines, such as lathes, drill presses, power saws, and mills where the seeing job is at or within arm's reach; performs mechanical or skilled trades tasks of a non-repetitive nature, such as carpenter, technicians, service people, plumbers, painters, mechanics, etc. ( ) C. The worker is required to have visual acuity to operate motor vehicles and/or heavy equipment. ( ) D. The worker is required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned (i.e., custodial, food services, general laborer, etc.) or to make general observations of facilities or structures (i.e., security guard, inspection, etc.) 4. The conditions the worker will be subject to in this position. (Please check all blocks that apply) ( ) A. The worker is subject to environmental conditions. Protection from weather conditions but not necessarily from temperature changes. ( ) B. The worker is subject to outside environmental conditions. No effective protection from the weather. ( ) C. The worker is subject to both environmental conditions. Activities occur inside and outside. ( ) D. The worker is subject to extreme cold. Temperatures typically below 32°ree; for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. ( ) E. The worker is subject to extreme heat. Temperatures above 100°ree; for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. ( ) F. The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. ( ) G. The worker is subject to vibration. Exposure to oscillating movements of the extremities or whole body. ( ) H. The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. ( ) I. The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system of the skin: fumes, odors, dust, mists, gases, or poor ventilation. ( ) J. The worker is frequently in close quarters, crawl spaces, shafts, man holes, small enclosed rooms, small sewage and line pipes, and other areas that could cause claustrophobia. ( ) K. The worker is required to function in narrow aisles or passageways. (x) L. None. The worker is not substantially exposed to adverse environmental conditions (such as in typical office or administrative work.)

Job Description Design Engineer, Decorative lighting , Bronx, NY Here at HB Architectural Lighting, we manufacture large- and small-scale, custom decorative light fixtures for public spaces, guest rooms, restaurants, places of worship, universities, high-end residences, and more. Based in Bronx, New York, our 30,000 square foot factory is vertically integrated with state-of-the-art, automated, and hand-operated machinery. Our highly skilled team turns conceptual designs into manufacturable products using various manufacturing techniques including CAD drawing, laser cutting, CNC machining, hand-forming metal, welding, polishing, hand finishing, and shade making. The Candidate will be responsible for: • Converting sketches developed by our customers, into a manufacture-able product using AutoCAD and or Solidworks software, • Be able to produce accurate part drawings, Detailed and Bills of Materials in the format established by our company standards, • Work with our Manufacturing team and Project Manager(s) throughout the manufacturing process to ensure the product meets the customer's expectations.

Job DescriptionConstruction Estimator Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves as being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include NYS Office of General Services, NYC Health + Hospitals Corporation, State University of New York, Dormitory Authority of the State of New York, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. Position – Estimator Location – NYC and / or Upstate New York Scope - All levels of Estimating experience for our continuous recruitment effort. We’re seeking professionals that can develop construction estimates on large transportation projects including airports, tunnels and bridges, bus terminals, roadways, rail stations, ports, and buildings. You will be responsible for developing engineering estimates in all stages of assigned projects, including planning, conceptual design, final design, and construction support. Requirements – • Bachelor’s degree in Engineering, Architecture, Construction Management or related technical field from an accredited college or university., • Valid driver’s license., • Must demonstrate a minimum of 2 years’ estimating experience with design-bid-build, design-build, or fast-track projects, as well as wide variety of construction trade projects preferably with a cost of $10 million or greater., • Must demonstrate experience developing cost estimates for all design and construction stages., • Must demonstrate the ability to communicate and interact effectively with cost estimators, design and field engineers/architects, project managers, contract engineers, schedulers, and contractors., • OSHA 30 Hour., • Must be proficient with Microsoft Excel., • Detail oriented with strong analytical skills., • Excellent problem-solving skills., • Must have exceptional interpersonal, oral, and written communication skills.Pay Rate: $35.00-$80.00/Hourly Salary. Actual compensation will depend on the individual’s qualifications, education, skills, and experience. Benefits of working at Laland Baptiste: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Baptiste University - Continuing Education Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR cr6d7kdvLY

Job Description Fairstead is a purpose-driven real estate firm dedicated to building sustainable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns a portfolio of more than 25,000 apartments across 28 states that includes 25,000 units under management. Fairstead's commitment to communities is realized through a comprehensive platform that leverages in-house expertise in acquisitions, development, design and construction, asset management, and property management. Fairstead's primary mission is to provide high quality housing to all regardless of income, and to make our stakeholders feel "Right at Home." We accomplish this through an empathetic and innovative approach, and by utilizing our interdisciplinary platform as an investor, developer, owner, and operator. Fairstead's Core Values: Innovation, Determination, Integrity, Humility, Empathy and Partnerships The Service Manager manages and supervises the repair and maintenance of property buildings. They ensure the timely installation of mechanical equipment and upkeep of Fairstead's property to ensure operational effectiveness. The Service Manager oversees operational efficiency of all electrical equipment and mechanical systems through inspection and repair and ensure that property's premises and facilities are kept clean and hygienic in alignment with Fairstead safety policies and standards. RESPONSIBILITIES: • Supervision of other maintenance employees., • Taking a leadership position on special projects., • Perform a variety of skilled maintenance and repair tasks., • Strong knowledge of accident and safety precautions., • Proficient in a specific trade with general maintenance and repair skills., • Work independently on routine projects and receive assistance for more complex projects., • Occasional need to work overtime for special projects or emergencies. BENEFITS: • Generous employer contribution for Medical and Dental through United Healthcare., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12+ paid Holidays., • 15 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • Three (3) years experience in property maintenance., • Proficient in a specific trade with general maintenance and repair skills., • Knowledge of tools, techniques, and terminology of building and mechanical trades., • Strong knowledge of accident and safety precautions., • Knowledge and experience using a variety of tools and equipment to complete tasks., • Great organization and project management skills., • Able to implement and improve policies and procedures., • Proficient in Microsoft Office Suite. Salary Range$24—$28 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job DescriptionThis is a temporary 6-month contracted 1099 position with no benefits. • Interprets customer specifications to define requirements for mechanical designs., • Performs first principal analysis related to appropriate aspects of mechanical design., • Applies the 3D CAD system to create mechanical design and drawings., • Develops detailed fabrication and assembly drawings and performs tolerance analysis., • Develop prototypes for design evaluation., • Troubleshoot and resolve design & processing issues., • Contributes to details of design documentation using electronic documentation systems., • Collects, analyzes and interprets data to propose recommendations., • Develops & execute design verification protocols and technical reports., • Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies., • Develop & debug prototype tooling / equipment and processes., • Develop test methods and fixtures., • Formulate plans & methods to accomplish assignments with appropriate oversight., • Works independently and prioritizes assigned tasks with guidance., • Contribute to project planning activities., • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Competent in use of Microsoft Office tools., • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes., • Familiarity and the ability to operate basic shop equipment such as hand tools, a drill, and Dremel., • Understand & interpret simple wiring diagrams., • BS in engineering discipline, mechanical preferred., • Minimum 2-4 years related experience, or an MS and less than one year experience., • Experience with a solid modeling CAD program, preferably Solidworks., • Experience in medical equipment / device design with experience in electromechanical, electro-pneumatic, and/or blood pumping equipment development., • Knowledge in medical device industry regulations and practices – ISO 13485, ISO 7198 & GMP., • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat., • Experience with Microsoft Visio and Microsoft Project preferred. Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR c1QYkE11NQ

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.