Trabajos repair en Houston, Texas - Page 17Crear alertas

Job Description JOB SUMMARY: Perform diversified duties as assigned. Operate and maintain boilers. Observe various meters and gauges and take appropriate action for safe operation. Start, stop, switch over boilers as appropriate. Clean and repair boilers, blow tubes and discharge sediment, regulate feed water and condensation pumps, lubricate pump equipment. Follow preventative maintenance schedule. Perform work such as repacking valves as needed, change piping, clean and paint in boiler room as needed, lubricate boiler compressors, pump and related parts regularly. Clean inside of boiler walls as needed. Repair and/or replace broken or worn parts, e.g. valves, meters, levers, etc. Keep log on each boiler and cooling tower water samples. Assign proper chemical treatment to boiling and cooling waters. Report major repair needs and unsafe conditions to the supervisor. Keep boiler room clean and orderly. SHIFT DETAILS: • Consistently supports the hospital's Spirit of Serving Standards, in line with the Mission, Vision and values of St. Joseph Medical Center., • Follows the St. Joseph Medical Center Guidelines related to the Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI)., • Promotes a culture of safety for patients and Associates through proper identification, proper reporting, documentation and prevention of medical errors in a non-punitive environment., • Perform periodic inspection of mechanical rooms throughout the Hospital to insure proper operation of heat, air conditioning and ventilation and medical support equipment (e.g., vacuum pumps, air compressors)., • Check pressure and temperature gauges periodically and log readings., • Assist in maintaining and repairing HVAC controls and associated equipment to maximize efficiency levels in all environmentally controlled areas., • Perform urgent corrective, routine, and requisitioned repairs of electrical, mechanical and plumbing systems as required., • Performs daily water chemical tests for central plant equipment and satellite buildings, logs and records all changes and amounts used daily. Inventories and submits chemical replacement orders into office the first of every month., • Performs daily inspection tours of satellite buildings, assuring all equipment is operating properly. Updates Lead Engineer by informing of any and all malfunctioning equipment., • Maintains clean and organized work and parts room, lists all parts and tools needed either for stock or job to be completed., • Work day, evening, or night shift as assigned with assigned responsibilities (see attached)., • Maintain established Hospital and Department policies and procedures, objectives, quality assurance, safety, environmental and infection control, and comply with codes and requirements of accreditation and regulatory agencies., • Maintain records, reports, logs, statistics, and files as required., • Perform other duties as directed., • Supportive of the compliance program set forth by SJMC and demonstrated by:, • Upholds the Standards of Conduct and Corporate Compliance., • Adheres to and helps to enforce all compliance policies relevant to his/her area., • Assures timely compliance education as requested by the Regional Compliance & Safety Officer and/or through corporate initiatives. WORK EXPERIENCE: • Two years experience in the operation of automatic and manually controlled high pressure steam boilers and two years experience in the operation of automatic and manual air conditioning systems., • First, Second or Third Grade Stationary Engineer's license and City of Houston Boiler License preferred., • Ability to communicate verbally and effectively with co-workers, Associates and patients, both in person and on the telephone., • Demonstrates reasonable intelligence, accuracy, imagination and the ability to cooperate with others., • Must be prompt and have a neat appearance. Welcome to St. Joseph Medical Center (SJMC), Houston's first and only downtown hospital delivering world-class care for the last 137 years and looking forward to the next century of exceptional care to Houstonians when they need us most. Whether it's for a scheduled surgery, the birth of a baby, an unexpected emergency, or an outpatient visit, we have staff available around the clock to provide you access to immediate, quality health care. SJMC has been providing health care services to Greater Houston residents for over 130 years, which should give you great comfort in knowing that we have a great tradition of caring for our community. We strive to meet our patients' expectations and encourage our patients to provide us with feedback on how we can help them have the best experience possible while they're in our care. Over the last years we have expanded our services to include the Advanced Wound Care Center, Comprehensive Cardiac and Vascular Services, the Women's Center, the St. Joseph Maternal Fetal Medicine Center, and a Weight Loss Surgery Program, just to name a few. As you work with our physicians, nurses, case managers, educators, and other staff, you will be guided through your health care journey, from diagnosis to treatment, with compassion every step of the way. Diversity, equity, inclusion, and belonging are at the foundation of the care St Joseph Medical Center provides to our community we are privileged to support in all of our employment practices. We do not discriminate on the grounds of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or expression or any other non-job-related characteristic.

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About You and The Role Zipline is seeking Aviation Maintenance Technicians who have sound judgment, excellent interpersonal skills and high standards. Success will require attention to detail, a safety-oriented attitude, flexibility, and enthusiasm for cutting-edge technology. Problem solving and solution oriented thinking while adhering to company standards are key to success in this role. What You'll Do You will be responsible for executing scheduled and unscheduled aircraft maintenance programs ensuring aircraft and associated elements conform to high standards, are in a safe operating condition and that all procedures are followed and documented appropriately. This role works closely with engineering, flight operations, and other teams to solve problems. • Adhere to and perform work in accordance with Zipline's Continuous Airworthiness Maintenance Program (CAMP), • Perform UAS Maintenance in accordance with Zipline's General Maintenance Manual (GMM) and Federal Aviation Administration regulations, • Travel within the service area to perform in-site maintenance of Zipline aircraft systems, • Troubleshoot, repair, and replace parts in accordance with manufacturer manuals, • Maintain accurate aircraft maintenance records and document work associated with scheduled and unscheduled maintenance., • Basic engineering knowledge: mechanical, electrical and software, • Mechanical and electrical integration and assembly and experience performing precision work with hand tools, • This role is classified as a Safety Sensitive opportunity, and is therefore subject to pre-employment and random drug and alcohol testing, • Must be available to travel 80% during first month of employment to attend Zipline's training program, • Must be able to support shift work including, but not limited to days/evenings, weekends, • Must be able to travel 5-10%, as necessary, • Must be eligible to work in the U.S., • Must be able to receive FAA Repairman Certification, • Ability to lift and or move up to 55 pounds, • Prior experience in aircraft maintenance or similar technician role, • Experience in the use of procedure manuals, training materials, and operational procedures for sUAS operations We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Mechanic , you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. The right candidate will have a track record of mechanical repair experience, preferably in the golf kart, go kart, motorcycle, or motorsports field, and will be self-motivated and be able to work in a fast-paced environment. Is this you? Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • A Drug Test and Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States, • Standing over 2/3 of time, • Walking over 2/3 of time, • Lifting is required

Job DescriptionDescription: Join a company where your reliability and craftsmanship are valued. State Fire is seeking an experienced, licensed Fire Alarm Technician to join our growing team in the Houston, TX region. As a regional leader in fire protection, we specialize in the installation, service, and maintenance of fire alarm systems, alarm monitoring, special hazard suppression systems, fire sprinklers, security systems, and more. We’re looking for a dependable professional who takes pride in doing the job right, someone with strong technical ability, a solid work ethic, and a commitment to quality and safety. If you want to build a long-term career with a company that values expertise and reliability, we want to hear from you. What You’ll Do • Install, inspect, service, and maintain a variety of fire alarm systems., • Diagnose, troubleshoot, and repair systems as needed, including emergency or warranty calls., • Perform scheduled maintenance and testing in accordance with NFPA and local standards., • Coordinate work efficiently with project managers, property managers, and subcontractors., • Maintain accurate documentation and follow all job site safety and compliance protocols., • Occasionally travel to other regions based on project needs.Why You’ll Love Working Here, • Competitive pay based on experience., • Comprehensive benefits package, including medical, dental, and vision insurance (HSA match available)., • 401(k) with company match., • $50,000 company-paid life insurance., • Paid Time Off (PTO)., • A reliable, team-oriented culture built on integrity, accountability, and mutual respect.Requirements:What You Bring, • 4+ years of experience in fire alarm or low-voltage systems preferred, • Hold current FAL license, • NICET Level I or higher certification preferred., • Demonstrated reliability, strong work ethic, and attention to detail., • Ability to read and interpret blueprints, wiring diagrams, and system layouts., • Strong technical troubleshooting and problem-solving skills., • Excellent communication and customer service abilities., • Ability to work both independently and as part of a team., • Must hold or be able to obtain any required state licensure within 90 days., • Ability to sit, stand, kneel, crouch, and climb for extended periods., • Comfortable working at heights on ladders, scaffolding, and lifts., • Safely lift and carry up to 70 pounds. State Fire participates in E-Verify. Join State Fire and take your fire protection career to the next level.

Job DescriptionBenefits: • Bonus based on performance, • Opportunity for advancement, • Training & development, • Competitive salary Perks and Benefits: • Compensation and Time Off, • Compensation: Base salary + bonuses of $35,000 - $50,000/year, • Stipends: Healthcare, wellness, mileage, and phone stipends, • Schedule and Location, • Location: majority time doing in-field sales; minimal remote admin work, • Work-Life Balance: Full time during business hours (no nights or weekends), • Manage Your Schedule: Midweek appointment? Scheduling autonomy means you can balance work commitments with personal appointments., • Small Business, Big Support, • Local Business: Small-business feel backed by the training, tools, and resources of a nationwide franchise., • Tight-Knit Team: Small business owner is involved, available daily, and leads weekly team meetings, • Technology: Quality leads provided in our software + routing tool to help you succeed, • Sales Support: Access to a dedicated Support Center for admin assistance, • Coaching and Training: Sales training plus continual 1:1 coaching with our sales coaching team.What a Typical Day Looks Like, • Map your route, run ~15 on-site visits, and book work., • Log notes/metrics in our software and coordinate with your Owner/Sales team., • Light admin and prep from your home, • Sales coaching and ongoing support, • Engage with the repair technicians to provide support on work assignmentsRequired Qualifications:, • Fluent in Spanish, • Goal-oriented, self-starter, and energetic, • Licensed to operate a passenger car and have a clean driving record, • Professional, caring and service-minded, • Readiness to work with a metrics-based, process-driven sales team, • Associates degreePreferred Skills:, • General working knowledge of property management and/or the construction industry, • 1-3 years of experience in outside sales, • Experience using CRM tools and processes, • Experience working in base + bonus environment

Job DescriptionDescription: ZT Automotive is seeking a driven, professional Service Operations Advisor to support our Service Department through structured customer communication, intelligent scheduling, and revenue-focused service recommendations. This role serves as a primary connection between the Service Department and its customers, leveraging CRM systems, AI-assisted communication tools, and dealership platforms to deliver timely, accurate, and professional service coordination. We are seeking an experienced, high-performing individual who thrives in a fast-paced, results-driven environment and is committed to long-term career growth within a growing organization. Responsibilities • Maintain a friendly, professional demeanor while assisting customers with vehicle service and maintenance needs., • Timely answer inbound phone calls and texts, including interactions supported by AI communication tools., • Conduct outbound calls to drive appointment scheduling and follow-up activity., • Efficiently schedule service and follow-up appointments based on customer needs and shop capacity., • Obtain and verify customer and vehicle information accurately., • Listen to customer needs and clearly document all vehicle symptoms exactly as described by the customer., • Review vehicle repair history and records to help determine recommended maintenance based on vehicle age, mileage, and history., • Recommend additional services, products, and maintenance solutions to support service sales and revenue targets., • Verify warranty and service contract coverage by examining records and documentation and explaining applicable provisions., • Provide expert product and service knowledge, directing customers to the appropriate dealership resources when needed., • Communicate with the Parts Department to coordinate and bring customers in for Special Order Parts (SOR) appointments., • Utilize CRM systems daily, accurately tracking and recording customer interactions to support efficient service operations., • Work collaboratively with other representatives in a team-oriented environment built on mutual respect., • Participate in team meetings and process development initiatives, fostering strong working relationships with colleagues and dealership management.Requirements:, • Past experience as a Service Advisor, Lane Manager, Service Consultant, or similar role preferred., • Very energetic personality with a strong customer service mindset., • A desire for a long-term career with a growing organization., • Personal and professional integrity., • Strong communication, interpersonal, and organizational skills., • An attentive listener who values empathy and customer-focused service., • Strong computer skills and willingness to learn new programs., • Proficient with Microsoft Office, CDK, and CRM tools, with strong multitasking ability., • Dedicated work ethic with the ability to thrive in a fast-paced, results-driven environment., • Team player with enthusiasm, reliability, and a positive attitude., • Open to constructive feedback and committed to performance improvement and development., • Flexible with scheduling, including availability to work weekends and holidays., • Organized and detail-oriented, maintaining a clean and professional work environment.

Job Description We're looking for Auto Painters with a minimum of 5 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Painter, you'll be expected to be highly skilled in painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Your Role at a Glance Planning • Plan, evaluate, organize, and implement installation, maintenance, and repair activities to minimize production downtime and maximize employee safety., • Coordinate maintenance activities with other departments to ensure smooth execution., • Implement and support the Computerized Maintenance Management System (CMMS), specifically SAP., • Maintain maintenance project schedules for rebuilds, small OPEX projects, and scheduled down days., • Monitor project progress, coordinate activities, and resolve issues to keep projects on track., • Prepare project status reports by collecting, analyzing, and summarizing data and trends., • Drive Total Productive Maintenance (TPM) strategies using:, • Root Cause Analysis (RCA), • Preventive Maintenance Optimization (PMO), • Predictive Maintenance (oil analysis, motor signature analysis, thermography, vibration analysis), • Manage predictive maintenance programs including thermal scanning, ultrasonic testing, and vibration monitoring., • Analyze predictive maintenance data to ensure proper preventive maintenance activities are executed., • Work with maintenance supervisors to ensure Professional Maintenance (PM) tasks are completed to high standards., • Lead and perform Failure Mode and Effects Analysis (FMEA)., • Conduct root cause analysis and implement sustainable countermeasures., • Review engineering specifications and design modifications for reliability and maintainability., • Maintain equipment performance records using SAP., • Prepare and maintain technical documentation including data sheets, wiring diagrams, and P&IDs., • Support the Master Asset Renewal Plan (MARP) throughout the asset life cycle., • Participate in design, installation, commissioning, and acceptance testing of new equipment., • Develop acceptance tests and inspection criteria for new installations., • Contribute to risk management plans addressing reliability‑related and non‑reliability risks., • Develop engineering solutions to repetitive failures and operational issues involving capacity, quality, cost, or compliance., • Apply analytical tools such as:, • Statistical Process Control, • Reliability modeling and prediction, • Fault Tree Analysis, • Weibull Analysis, • Work with Production to analyze:, • Asset utilization, • OEE, • Remaining useful life, • Operating condition and cost drivers, • Review projects for continuity, completeness, and alignment with reliability goals., • Assist with capital project management as needed., • Maintain communication with all project personnel and stakeholders., • Determine project staffing needs in coordination with supervisors and managers., • Use staffing charts to track progress and maintain project timelines., • Supervise project staff and delegate technical tasks appropriately., • Continuously evaluate the workplace for safety concerns and support behavioral safety initiatives., • Enforce plant rules, safety regulations, and 5S housekeeping standards., • Work with Maintenance and Production Managers to manage OPEX funds., • Support Autonomous Maintenance by training operators and ensuring equipment basic conditions are maintained. We’re looking for individuals who bring the right mix of experience, mindset, and motivation: • Strong working knowledge of TPM, RCA, predictive and preventive maintenance systems, and visual plant concepts., • Excellent communication and interpersonal skills., • Proven planning and organizational abilities., • Strong leadership with a sense of ownership and results orientation., • Working knowledge of Six Sigma/Lean Manufacturing (or willingness to learn on the job)., • Experience in continuous manufacturing environments., • Strong analytical and problem‑solving skills., • Ability to work effectively in a team‑based environment., • Project management, • Safety management, • CAD proficiency Bachelor’s degree in one of the following: • Reliability Engineering, • Mechatronics Engineering, • Mechanical Engineering Success in this role is driven by a strong mix of personal ownership, collaboration, and continuous improvement. We value team members who: • Communicate clearly and constructively, • Collaborate effectively and contribute to team success, • Adapt to change with a positive, proactive mindset, • Take accountability and show initiative in their work, • Demonstrate reliability and pride in performance, • Prioritize safety and act with awareness, • Embrace feedback and use it to grow, • Maintain high attention to detail, • Drive continuous improvement and challenge the status quo We’re committed to helping you thrive- on the job and beyond. That’s why we offer a collaborative culture where your ideas drive real change, and career mobility within a stable, essential industry. To support your growth and well-being, we also provide a comprehensive and competitive benefits program, including: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Performance-Based Bonus Program

Job Description This position will be for the Houston area. • Service and inspect fire alarm systems, • Test fire alarm systems to ensure they are in proper working order, • Troubleshoot and repair problems with fire alarm systems, • Conduct routine maintenance on fire alarm systems, • Program fire alarm systems using software, • Keep accurate records of all fire alarm system inspections and repairs, • Provide training to customers on fire alarm systems SKILLS: • Ability to read and interpret schematics and wiring diagrams, • Ability to troubleshoot and repair fire alarms, • Knowledge of fire safety codes and standards, • Must have state FAL certification in fire alarm systems, • Ability to troubleshoot and repair fire alarm systems, • Knowledge of applicable fire codes and standards, • Ability to read and interpret blueprints and schematics Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job DescriptionDescription: Are you a motivated person with a can-do attitude? If so, we’d love to have you join our team! What can we offer you?: • Competitive Wages;, • Paid Time Off (begin accruing on your very first day of employment!);, • Monthly incentive program;, • Medical, dental and vision benefits;, • 401K;, • Uniforms; Since the mid-1970’s, Twin Cities’ companies of all sizes have trusted Commercial Truck & Mobile to maintain their fleets. Commercial Truck & Mobile Repair is a full-service Fleet Maintenance Management Company. Commercial Truck & Mobile Repair is part of the Berger Transfer & Storage, Inc Family of Companies. Berger Transfer & Storage, Inc is a leading provider of relocation, distribution and warehousing services. Founded in 1910, Berger has been providing moving and storage services to individuals and businesses for over 100 years! Berger is Allied Van Lines’ largest agent with 16 locations throughout the U.S. Commercial Truck & Mobile Repair is seeking an experienced DIESEL MECHANIC. This opportunity is a dedicated on-site position, our company does not provide emergency side of the road type of repairs. Our Diesel Mechanic will master troubleshooting skills, and develop a broad knowledge to properly diagnose, maintain and repair tractors and trailers. We service all makes trucks, engines and transmissions including Cat, Cummins, Detroit, Mercedes, Int’l engines, Eaton and Allison transmissions. Responsibilities for our Mobile Diesel Mechanic include but are not limited to: • Perform repairs and inspections on a variety of Class 6-8 trucks, such as brakes, tires, wiring, etc.;, • Perform basic and routine preventative maintenance on vehicles, along with DOT inspections;, • Repair/replace vehicle components;, • Open and close repair orders on company issued iPad;, • Obtain parts from local vendors and manage inventory on the service truck;, • Accurately complete DOT forms and all other forms of documentation in a timely fashion;, • High School Diploma or Equivalent (required);, • Minimum of 3 years of Diesel Technician experience preferred;, • Strong communication skills both verbal and written;, • Valid Driver's License is required;, • CDL-A preferred but not required;, • Ability to use iPad and associated apps;, • Must provide own hand tools that are adequate to perform job functions;, • Proficient computer skills/software navigation capabilities to document repairs and use email;

Job Description For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions — with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: • Pressure Management, • Isolation Valves & Actuation, • Control Valves & Regulators, • Process Control & Safety Systems, • Oil & Gas Automation– fiscal custody metering, controls, and SCADA, • Reliability Solutions & Services, • Specialty Pumps & Rotating Equipment, • Instrumentation Duties and Responsibilities: • Identifies and evaluates customer needs and offers appropriate solutions., • Works under the direction of the Sales Manager to develop the account plan., • Promotes Rotating Equipment products and services to customers including but not limited to, centrifugal pumps, positive displacement pumps, blowers, compressors and their accessories, and integrated pump packages., • Interfaces with RQ management, inside sales and other company sales and account teams to communicate activities, opportunities, issues, and status of goals, all designed to deliver the total Company value., • Develops and maintains customer relationships., • Attends technical conferences and product and technical training sessions., • Establishes and maintains relationships with Engineering, Purchasing, Maintenance departments, other key decision makers, and Principals., • Conducts product demonstrations and technical presentations., • Provides technical assistance to other Sales and Operations personnel., • Presents and specifies products for varied applications. Determines application and specification of products., • Helps develop sales forecast and strategy to accomplish goal. Education/Knowledge: • BS/BA Degree in Business or Engineering related disciplines. Alternative AS/AA degree and two plus years of experience; or equivalent combination of education and experience. Technical degrees are preferred., • 3-5 Years technical sales/customer service experience required including experience of prospecting, cold calling, and presentations to customers., • Good Computer skill proficiency with MS Office and Outlook., • Strong written and oral communication skills including formal presentation skills., • Demonstrated ability to interface with and influence senior level executives., • Strong prospecting/opportunity identification skills. Innovative in selling and servicing approach., • Strong drive and initiative – motivated to success. Displays win/win negotiating skills., • Ability to manage customer expectations relative to deliverables and timeframes. Strong Customer Service Skills, including the ability to develop rapport and trust with customers., • Strong strategic thinker with solid technical aptitude., • Team Player with good conflict management and consensus building skills., • Demonstrated proficiency in coordination of multiple sales departments and support staff to provide customer solutions effectively and optimize Company success., • Problem solver- Uses good judgment and approaches opportunities strategically., • Strong Business Acumen. Recognizes complimentary solutions., • Exhibits strong self-management skills including a high degree of professionalism and dependability.

Job Description COMPANY OVERVIEW: Our client is a manufacturer of and supply components for companies and contractors worldwide including Construction, Parts, Service, Repair. POSITION TITLE: Business Development - Cooling Towers COMPENSATION: Competitive base salary DOE + bonus BENEFITS: Standard package LOCATION: Houston, Texas SUMMARY: The primary purpose of this position is to manage accounts and drive results in the given territory. DUTIES OR RESPONSIBILITIES: • Responsible for assigned region and accounts in the Southeast US., • Actively pursue and secure key/strategic accounts, • Establish relationships to move vertically and horizontally within an account, • Develop capture plans for individual projects and accounts understanding customer needs and pain points, decision makers and buying process, • Capable of working at the plant level with customer equipment owner and subject matter experts, • Perform inspections, write reports, and prepare proposals, • Develop and cultivate customer relationships by meeting with customers, conducting presentations, and discussing existing projects, • Value by promoting value propositions, • Contact and meet with customers to discuss all aspects of opportunities and proposals while closing opportunities, • Conduct Executive Level Communication among both the customers, • Develop competitive analyses and strategic positioning plans for each account working with leadership and management, • Work in a cross-functional manner with various teams to maximize sales in the given accounts, • Understand competitive intensity of opportunities to best enable success, • Serve as product expert being able to solve routine product/systems issues, • Develop and clearly articulate account growth plans by product, • Meet territory sales and standard margin goals for various product solutions, • Solicit and analyze customer feedback for product performance and value, • Provide expert product knowledge across all product lines, • Bachelor’s degree preferred (not required), • 5-10 years’ experience in sales, • Knowledge of chemical/refining/industrial applications/cooling towers is preferred, • Aftermarket or distributor sales (representative management) experience is preferred, • Strong negotiation skills ***PLEASE NOTE: We try to respond to everyone who applies for our jobs, but in periods of high activity it may not be possible. We hope we can personally help you find your new job and wish you success in your job search. For more information, please email Kristin Skendziel at

Job DescriptionDiesel Truck and Trailer Mechanics are needed in Channelview and Houston TX to join a national fleet. This opening provides an opportunity for growth, training, and advancement. Multiple shop locations available. HM183 or R-Stamp certification preferred. Compensation: $28.00 - $38.00/hour Sign-on Bonus Weekly Pay PTO, Holidays 401K Matching Program Comprehensive Benefits (Medical, Dental, Vision) Tool and Boot Allowance Shift/Schedule: Days, Mids, or Nights available Monday to Friday Preferred Requirements: Truck OR Trailer repair experience, Own Tools, Valid Drivers License Hazmat, HM-183, R-Stamp, State Inspection Licenses Ability to follow manufacturer guidelines, and technical manuals Knowledge of emissions, A/C, diagnostics, diesel engines, air, electrical, mechanical, and hydraulic systems Welding experience; Stick or MIG or TIG

Job Description Position: Paint Helper Custom Air Products & Services, Inc. is an aggressively growing company always looking for qualified individuals with a strong work ethic, a commitment to excellence and a desire to join a winning team. We have been proudly serving Houston and surrounding areas, providing quality service and customized installation of commercial and industrial HVAC systems. Job Description: As a Paint Helper at Custom Air Products & Services, Inc., you will work within our prep sanding area, providing invaluable support to our painters. Your role involves assisting with various tasks such as holding or supplying tools and materials, as well as maintaining cleanliness in work areas and equipment. This position is crucial to ensuring the seamless execution of painting projects. Key Responsibilities: • Caulk units in preparation for painting to ensure a smooth finish., • Utilize masking tape to cover surfaces that will not be painted, facilitating a precise painting process., • Remove existing paint and utilize epoxy compounds, putty, or other filling materials to repair surfaces as needed., • Safely operate sanders and ladders to prepare surfaces for painting., • Maintain cleanliness in work areas and equipment, ensuring they are free from paint stains and debris. We value our team members and offer competitive benefits, including: • 401K with company match, • Medical insurance, • Dental insurance, • Vision plan, • Prescription plan, • Health savings account, • Life insurance and disability coverage, • If you have a strong work ethic, a commitment to excellence, and the desire to be part of a winning team, we invite you to apply and embark on a rewarding career with Custom Air Products & Services, Inc. To learn more about Custom Air Products & Services, Inc., visit us on: • Facebook, • Twitter, • LinkedIn, • Our Website

Job Description Truss Real Estate is a fast-growing, builder-focused brokerage known for high transaction volume, strong systems, and long-term builder partnerships. We’re seeking a Transaction Coordinator who thrives in a fast-paced environment, takes ownership of their work, and wants to play a meaningful role in shaping how our operations scale. This role is ideal for someone who values structure and enjoys improving processes, supporting a close-knit team, and being entrusted with real responsibility. At Truss, we move quickly—but we do it together. We care deeply about our people, invest in their growth, and create space for individuals who want to grow alongside the business, not get lost inside it. Compensation: $45,000 - $65,000 yearly Responsibilities: Builder Transaction Management • Coordinate and manage all builder transactions from executed purchase agreement through closing, • Serve as the primary transaction point of contact for builders, agents, title companies, and lenders, • Track critical deadlines, milestones, and contingencies to ensure timely and smooth closings, • Support high-volume, repeat builder projects with consistency and attention to detail Listing & Pre-Listing Coordination (Builder Inventory) • Prepare and manage listing agreements, disclosures, CMAs, and builder-specific listing documentation, • Coordinate photography, staging, signage, lockbox access, and marketing readiness for new construction homes, • Input, update, and maintain accurate listing data in MLS and all marketing platforms, • Ensure listing information remains current throughout construction, pricing changes, and status updates Builder Communication & Relationship Support • Maintain proactive communication with builders regarding timelines, inspections, appraisals, and closing readiness, • Communicate the offer terms to builders once negotiated by leadership, • Provide builders with ongoing updates related to showings, buyer activity, inspections, and transaction progress, • Act as a reliable extension of the Truss team to support strong, long-term builder relationships Contract, Compliance & Documentation • Review contracts, amendments, and transaction documents for completeness and accuracy, • Submit all required documentation to the broker for compliance and file auditing, • Maintain organized and compliant transaction files in Truss systems, • Ensure brokerage, MLS, and regulatory requirements are consistently met Inspections, Appraisals & Repair Coordination • Schedule inspections, appraisals, blue tape walks, final walks, and closings, • Communicate inspection findings and repair requests between buyers’ agents and builders, • Track repair resolutions and follow through to completion prior to closing, • Assist with appraisal coordination and timing to support accurate valuation Title, Lender & Closing Coordination • Coordinate with title companies and lenders to ensure smooth escrow and loan progression, • Provide loan status updates to internal leadership as needed, • Manage closing logistics, possession timelines, and final documentation, • Support or attend closings when required Internal Tracking & Reporting • Maintain and update internal transaction trackers and builder spreadsheets, • Support leadership with reporting related to active listings, pending transactions, and closings, • Assist with builder project organization across multiple developments or communities Post-Closing & Client Follow-Up • Coordinate post-closing follow-ups as required by Truss processes, • Assist with client service needs related to move-in logistics, warranty contacts, or vendor recommendations, • Support referral requests and relationship continuity post-transaction General Support • Provide light problem-solving support on active transactions and escalate issues to leadership when appropriate, • Real Estate License (preferred), • Real Estate Transaction Experience, • Exceptional Time Management Truss Real Estate is a fast-growing local real estate company. We are a people - and process-based company, and we are looking for like-minded individuals. We strive to be true professionals in our industry, from the front lines to our support staff. Please check out our Instagram page to get a preview of our work @trusshtx.

Job DescriptionDescription: Position Overview The 30+ year company supports the petrochemical and manufacturing industry domestically and internationally and is positioned along the Gulf Coast, providing training, occupational medicine, and innovative solutions to industry. The Medical Provider works under the direct supervisor of the Regional Medical Director in evaluating and treating patients. He or she may also assists in minor surgical procedures following occupational injuries. Essential Job Responsibilities • Conduct thorough medical evaluations and provide appropriate treatment for patients, ensuring high standards of care., • Oversee the work of certified medical staff, providing guidance and support to ensure efficient and effective patient care., • Participate in minor surgical procedures, including but not limited to joint injections, laceration suture repair, wound debridement, and eye foreign body removal., • Conduct medical examinations at various locations as needed., • Perform remote medical evaluations through telemedicine platform., • Support case management efforts by participating in calls and providing medical expertise., • Available for after-hour calls and visits to address urgent medical needs., • Ensure compliance with all state licensing agencies., • Take initiative in leading or assisting with new clinic projects, contributing to the growth and development o the clinic., • Engage in ongoing education and training programs to stay current with medical advancements and best practices. Requirements • Must be a certified Nurse Practitioner or Physician Assistant., • Strong proficiency in performing minor surgical procedures., • Strong communication skills both written and oral., • Ability to work independently and as part of a team, fostering a collaborative work environment., • Must be able to adapt to work in varied environments and learn detailed procedures., • Proven ability to work under pressure and make effective decisions., • Cross-train and assist other departments as necessary., • Commitment to maintaining all required CME’s., • Can have no active investigations by the Texas Medical Board., • Requires an active DEA and DPS certificate with no restrictions on prescribing medications. While performing the duties of this job, the employee is regularly required to read, talk or hear. The employee frequently is required to stand, walk, sit, use hands to handle training equipment and tools, reach with hands and arms, climb or balance, stoop, kneel, crouch, and crawl. The employee occasionally lifts and/or moves up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. This position may perform other related duties as required to meet the ongoing needs of the organization. Work Environment This job is typically in an office environment and will also require travel as needed. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Reporting Responsibilities The Physician Assistant reports directly to the Regional Medical Director. This position does not have direct reports. Requirements:

Job DescriptionDescription: Job Summary The Assistant Chief Engineer is responsible for ensuring proper operations, maintenance, service and repair of all equipment, while supporting the Avion Hospitality goals of guest satisfaction, cost control and profitability. He/she is also responsible for overseeing and participating in the Preventative Maintenance program, ensuring that all rooms and public space meet Avion Hospitality standards. Management-level associates are expected to work as much of each workday as is necessary to complete their job responsibilities; for OEM associates, overtime does apply and is calculated accordingly. Exempt managers must customarily and regular direct the work of at least 3 full-time associates or their equivalents. Primary duties must consist of administrative, executive, or professional tasks more than 50 percent of the time and job duties must also involve the use of discretion and independent judgement more than 50 percent of the time. Education & Experience • High School diploma or equivalent required., • At least 5 years of progressive experience in a hotel or a related field; or a 2-year college degree and 3 or more years of related experience; or a 4-year college degree and at least 2 years of related experience., • Supervisory experience required., • Current Certification as required by Federal, State or Local governing agents pertaining to trade requirements (i.e. HVAC, pool operation, electrical), property specific., • Current certification and licensing to operate and repair the hotels boilers and chillers as required by state, city, and local legislation., • Must have a valid driver's license for the applicable state., • Must be able to convey information and ideas clearly., • Must be able to evaluate and select among alternative courses of action quickly and accurately., • Must work well in stressful, high pressure situations., • Must maintain composure and objectivity under pressure., • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary., • Must have the ability to assimilate complex information, data, etc. from disparate sources and consider, adjust or modify to meet the constraints of the particular need., • Must be effective at listening to, understanding, clarifying and resolving the concerns and issues raised by coworkers and guests., • Must be able to work with and understand financial information and data, and basic arithmetic functions. Requirements: Job Duties & Functions • Approach all encounters with guests and employees in an attentive, friendly, courteous and service oriented manner., • Maintain regular attendance in compliance with Avion Hospitality standards, as required by scheduling which will vary according to the needs of the hotel., • Maintain high standards of personal appearance and grooming, which include wearing the proper uniform and name tag when working (per brand standards)., • Comply at all times with Avion Hospitality standards and regulations to encourage safe and efficient hotel operations., • Comply with certification requirements as applicable for position to include: Food Handlers, Alcohol Awareness, CPR and First Aid, • Train and supervise the hourly Engineering staff and coordinate all scheduling., • Review Engineering staff's worked hours for payroll compilation and submit to accounting on a timely basis., • Focus the Engineering Department on their role in contributing to the guest service scores., • Motivate, coach, counsel and discipline all Engineering personnel according to Avion Hospitality standards., • Conduct all 90 day and annual employee performance appraisals according to Avion Hospitality standards., • Prepare and conduct all Engineering interviews and follow hiring procedures according to Avion Hospitality standards., • Attend weekly staff meetings and provide training on a rotational basis using the steps to effective training according to Avion Hospitality standards., • Respond to employee emergency situations using information contained in M.S.D. sheets. Keep M.S.D. sheets current and easily available (with Housekeeping Manager)., • Establish ongoing training for all departments especially Housekeeping, Front Desk and Kitchen to maintain basic upkeep of their departments and equipment., • Adhere to budgeted or re-forecasted expense allotments, using proper procedures for all purchases and keep all necessary items (light bulbs, name tags, etc.) stocked., • Coordinate all inspections of the fire safety systems, including extinguishers, smoke alarms, etc., to maintain proper safety standards., • Manage energy expenses and continually work towards energy conservation., • Participate in required M.O.D. coverage as scheduled., • Ensure that the Preventative Maintenance program is implemented and administered according to Avion Hospitality standards., • Evaluate and spot check the work of all staff and contractors or outside laborers., • Handle guestroom maintenance requests in a timely manner., • Maintain files of and be familiar with all operational manuals and warranty agreements for equipment., • Immediately follow up on any alarms to determine the exact location and cause; determine emergency status and report to Guest Services and/or the General Manager with findings., • Ensure that employees are at all times attentive, friendly, courteous and helpful to guests, all other employees and managers., • Act as emergency contact person., • Attend monthly all-employee meetings and any other functions required by management., • Maintain a professional working relationship and promote open lines of communication with managers, employees and other departments., • Ensure that pool and spa are in compliance with area health codes., • Use proper two-way radio etiquette at all times when communicating with other employees; Ensure the proper use of radio etiquette within department., • Chair Safety Committee, as well as help coordinate fire drills and the training of all employees on safety procedures., • Establish and maintain key control system., • Be familiar with the organization of Avion Hospitality Hotels and know the function of each department., • Conduct daily property tour of the hotel and exterior perimeter for debris and trash removal; Check the lighting and irrigation periodically., • Handle items for “Lost and Found” according to the standard. The following outlines the work environment employees will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Frequency Grid 112019 N = Not Anticipated 0% O = Occasionally 1-33% (per shift) F = Frequently 34-66% (per shift) C = Constantly 67-100% (per shift) Work Environment Associate is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes.- F Associate is subject to outside environmental conditions: No effective protection from weather.- O Associate is subject to extreme heat or cold (temperatures below 32 degrees or above 100 degrees) for periods of more than one hour.- N Associate is subject to noise: There is sufficient noise to cause the employee to shout in order to be heard above ambient noise level.- F Associate is subject to vibration: Exposure to oscillating movements of the extremities or whole body.- O Associate is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.- O Associate is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gasses, or poor ventilation.- O Associate is subject to oils: There is air and/or skin exposure to oils and other cutting fluids.- F Associate is required to function in narrow aisles or passageways.- O Associate is exposed to infectious diseases. O None: Associate is not substantially exposed to adverse environmental conditions (as typical office or administrative work).- O Physical Requirements Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms.- O Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces.- O Stooping: Bending body downward and forward by bending spine at waist. Requires full use of the lower extremities and back muscles.- O Kneeling: Bending legs at knee to come to rest on one or both knees.- O Crouching: Bending the body downward and forward by bending leg(s) and spine.- O Crawling: Moving about on hands and knees or hands and feet.- O Reaching: Extending hand(s) and arm(s) in any direction, particularly for sustained periods of time (typing/using a mouse). Standing: Remaining upright on the feet, particularly for sustained periods of time.- C Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another.- C Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward.- F Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion.- F Finger Dexterity/Grasping: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling. Applying pressure to an object with the fingers and palm.- O Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips.-F Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers or guests accurately, loudly, or quickly.- F Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive information through oral communication.- F Repetitive Motions: Making substantial movements (motions) of the wrists, hands, and/or fingers.- O Vision: Employee is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; determine accuracy, neatness, and thoroughness of the work assigned; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurements devices; and/or assembly or fabrication of parts at distances close to the eyes.- F Lifting Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to positions.- O- 50+ lbs. Background Check This job requires a valid drivers' license and motor vehicle background check.- Yes This job requires a criminal background check.- Yes This job requires a drug screen to be completed.- No General This job description is not intended to be all-inclusive, additional details will be specified by the supervisor. The associate will also perform other reasonable business duties as signed by the supervisor. Management reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. If requested in accordance with applicable law, the Company provides reasonable accommodation to known physical or mental limitations of an otherwise qualified associate with a disability to allow him/her to perform essential functions of the job unless the accommodation would impose an undue hardship on the Company. Avion is an at-will employer. This job description is a guideline and does not constitute a written or implied employment contract. I HAVE READ AND UNDERSTAND THE JOB DESCRIPTION AS STATED ABOVE AND ACCEPT THAT ANY OF THE TASKS MAY BE MODIFIED OR CHANGED. I ACCEPT RESPONSIBILITY FOR KNOWING THE MODIFICATIONS AND / OR CHANGES IN THIS JOB DESCRIPTION. I CAN PERFORM THE ESSENTIAL FUNCTIONS OF THIS JOB AS LISTED ABOVE, WITH OR WITHOUT REASONABLE ACCOMMODATION.

Job Description Location: Primary Facility - Houston, TX Hiring Immediately Economy Transportation and Logistics is hiring an experienced Maintenance Mechanic to service and maintain our fleet of Class A commercial diesel vehicles, trailers, and equipment. This role is critical to keeping our operations safe, compliant, and running efficiently. We operate a diverse fleet including tankers, ISO containers, flatbeds, and dry vans. Work Environment * Primary Facility: Houston, TX * Fleet supports regional operations: Occassional travel to neighboring regions required * We follow the work wherever it goes. Equipment Serviced * Class A diesel tractors (sleeper trucks) * Tanker, ISO container, flatbed, and dry van trailers • Offload Pumps and ancillary equipment 10, 13, and 18-speed manual transmission equipment * DOT-regulated commercial vehicles Schedule & Employment Type * Full-time, W2 position * Weekly pay via direct deposit * On-site shop with field support as needed Pay & Incentives • Weekly pay Paid vacation increases after anniversaries on Year 1 and Year 5 * Overtime opportunities available Benefits * Medical, Dental, and Vision Insurance (United Healthcare) * Weekly direct deposit * 24/7 operations and dispatch support * Stable workload with a growing company Key Responsibilities * Perform preventive maintenance, inspections, and repairs on Class A diesel trucks and trailers * Diagnose and repair engines, transmissions, brakes, suspensions, electrical systems, and air systems * Ensure equipment meets DOT and safety compliance standards * Complete accurate maintenance records and inspections * Perform roadside or field repairs as needed * Work closely with operations and dispatch to minimize downtime Minimum Requirements * 5+ years of experience as a diesel mechanic working on Class A commercial vehicles * Strong knowledge of diesel engines and trailer systems * Experience with 10, 13, and 18-speed manual transmissions * Ability to diagnose mechanical and electrical issues * Familiarity with DOT inspection and compliance standards * Valid driver's license * Ability to work independently and as part of a team Preferred Qualifications * CDL Class A * Experience with oilfield equipment * Tanker and ISO container trailer experience * Welding or fabrication experience Apply Now If you're a dependable, skilled diesel maintenance mechanic looking to work with a company that values safety, reliability, and strong pay, we want to hear from you. Join Economy Transportation and Logistics and keep our fleet moving By applying for this position, you understand and agree that this organization may conduct a background check and/or drug screening as part of the hiring process. You will be provided with a separate disclosure and authorization form for these checks. Failure to consent to these screenings may result in disqualification from further consideration for employment. This is a drug-free and alcohol-free workplace. To maintain compliance with regulatory authorities and ensure a safe working environment, the organization conducts random drug and alcohol testing. All employees are expected to comply with this policy as a condition of employment. Please note: This job opening is not open to staffing agencies or third-party recruiters. Unsolicited inquiries or candidate submissions from agencies will not be considered or responded to.

Job Description Why The Morgan Group? At The Morgan Group, we are more than our 70+ multifamily properties — we are a community built on people. We believe in treating everyone with respect and dignity, from our team members and partners to our residents, clients, subcontractors, and vendors. We strive to foster an inclusive environment where every idea, perspective, and contribution is valued, and where everyone feels heard and appreciated. Our Core Values are the foundation of our success — they guide how we hire, reward, and evaluate every member of the Morgan team. Morgan Core Values We are Self-Starters • In it to win it, • We take initiative, • We are team players, • We are inclusive, • We are reliable, • We seek excellence, • We learn from our mistakes, • We strive to improve, • Embrace challenges & be optimistic, • We are resilient, • Choose positivity, • Do the right thing, • We are honest and have high integrity, • We make good decisions, • Our future depends on it We attract and retain top talent by offering full-time team members a comprehensive range of benefits designed to support their well-being and success: • Advancement opportunities, • Training, • Low-cost Medical, Dental, Vision, • Flexible Spending Accounts (Medical, Limited Purpose), • Health Savings Account, • Voluntary Life Insurance, • Long-Term Disability Insurance, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • 401K (Traditional & Roth) with Company Match, • Employee Assistance Program, • Paid Time Off plans including:, • Vacation, • Sick, • Floating Holiday, • Bereavement Leave, • Holiday Schedule, • Referral Bonus Program, • Quarterly Bonus Program How does Morgan Group benefit you? Joining Morgan Group means more than just a job — it’s a chance to learn, grow, and build a career you’re proud of. From property management and maintenance to construction and development, we provide the tools, training, and team support to help you reach your full potential. What You'll Do Essential Job Functions: • Adhere to MORGAN’s Maintenance, Emergency Procedures, Leasing and Marketing, Management and Operations, manuals along with the Team Member Handbook., • Supervise a team of qualified and trained Team Members who perform their jobs safely and provide customer service., • Monitor building systems, fire, electrical, security, elevators, etc. Report all unsafe areas to Community Manager., • Constantly inspect the community and report hazards to the Community Manager., • Conduct all work in compliance with OSHA and the MORGAN Operations manual., • Maintain a workplace that adheres to safety standards. Train all Team Members on safety procedures., • Maintain flammable and hazardous materials in a safe and secure area. Responsible for having SDS on all chemicals., • Supervise all outside contractors and inspect work for quality and safety., • Maintain all common areas., • Maintain a preventive maintenance program for all building interiors and exteriors including pools, fitness equip. HVAC systems, lighting, etc., • Respond to all service requests within 24 hours. Ensure that all service requests are completed correctly and in a timely manner., • Ensure that all vacant units are market ready within 7 days., • Maintain a proper inventory of tools and supplies to maintain property and consistent with property budget., • Maintain a safe and secure area for property tools and supplies by keeping the area neat and organized on a daily basis., • Comply with all training requirements set forth for this position. Other tasks as assigned by your supervisor, not listed as essential job functions. Physical Requirements: • Will need to be on feet (66% to 100%)., • Will need to perform the following physical activities (66% to 100%). Example: Bend/stoop/squat/kneel Perform routine maintenance/repair duties such picking up debris. Climb stairs Routine duties require access to upper floor apartments and interior apartments with multiple levels. Will need to climb and work off a ladder. Push or pull Move equipment, appliances, and open/close doors. Reach above shoulders Perform routine maintenance repairs, paint, stock, and remove equipment. Grasp/grip/turning and finger dexterity Handle maintenance tools, nails, and open/close ladders, perform routine maintenance/repairs, use telephone, pager, 2-way radio. Vision Requirements: • Must be able to complete forms, review reports and enter data on the computer., • Will need to observe areas needing attention/correction., • Read cautionary labels, respond to written instructions from staff., • Constant requirement to give information and receive instructions from residential management (33% to 66%)., • There may be an occasional need to utilize personal transportation to pick up replacement parts and supplies from vendors (1% to 33%)., • Ability to be on-call and be on the property on short notice., • Constantly outdoors, in all weather conditions, often for extended periods of time (66%-100%)., • Frequently indoors in all weather conditions that may make the environment uncomfortable (hot in summer, cold in winter). (33% to 100%), • Occasional exposure to paint fumes, solvents adhesives, etc. (33% -100%). Example – apartment during painting and/or immediately during or after turnover. Team Member must wear Personal Protective Equipment (N-95 Mask), rubber gloves and eye protection, when necessary., • Occasional need to work in awkward confining positions (1% to 33%).

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off Were urgently seeking an experienced Property Damage Auto Adjuster to become a key part of our growing team! If you have experience gathering statements and evidence, investigating coverage concerns and liability, and managing repair processes, we want to hear from you! This is an excellent opportunity to work in a fast-paced, dynamic environment where your skills and expertise will be highly valued. Key Responsibilities: • Investigate, evaluate, and resolve auto liability claims in compliance with company policies and state regulations, • Analyze policy coverage and determine liability while maintaining a high level of accuracy, • Gather and assess statements, police reports, and other evidence to support claim decisions, • Communicate professionally with policyholders, claimants, attorneys, and third-party vendors to ensure timely claim resolution, • Manage claim files effectively, ensuring timely documentation and follow-up, • Provide outstanding customer service while maintaining efficiency in a high-volume call center environment, • Collaborate with internal teams to improve processes and drive operational successKey Qualifications:, • 3+ years of experience handling auto liability claims, including making coverage and liability decisions, and recorded statements, • Strong knowledge of insurance policies, state regulations, and claim resolution procedures, • Ability to effectively communicate complex information both verbally and in writing, • Strong analytical and investigative skills to assess claim validity and liability, • Proficiency in computer systems and ability to multitask efficiently, • Ability to work and thrive in a fast-paced, high-volume call center environment, • Strong negotiation skills and the ability to handle difficult conversations professionally

Job Description Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: • Weekly Competitive Pay - Pay is $ 25 - $27 /hour depending on experience and location, • Tool/Boot Reimbursement Program, • Referral Program, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Generous Paid Time Off/ Holiday Schedule, • Matching 401K Mechanic Duties/Responsibilities: • Diagnose and repair tractors and trailers. Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Able to identify parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety, • Using welding equipment, • Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems., • Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Preferred Qualifications • High school diploma, completion of G.E.D., or equivalent vocational school preferred, but not required., • Dynamic, ambitious and engaged team player. Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity.

Job DescriptionDescription: About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Structural Welder is responsible for fitting, aligning, and welding structural components used in the fabrication of supports, frames, and assemblies for piping systems and industrial applications. This position requires the ability to interpret blueprints and welding symbols, perform quality welds in accordance with codes and company standards, and maintain a high level of safety and craftsmanship in all tasks. Requirements: • Read and interpret blueprints, drawings, and welding symbols to determine material requirements and welding procedures., • Set up and operate welding equipment to join structural components, • Position, align, and fit structural parts prior to welding, using clamps, squares, and measuring tools., • Inspect welds visually and dimensionally to ensure conformance with specifications and quality standards., • Repair or rework defective welds as needed., • Maintain welding equipment and ensure tools are in safe working condition., • Follow safety procedures for working with compressed gases, hot materials, and heavy equipment., • Collaborate with fitters, fabricators, and supervisors to ensure project deadlines and quality goals are met., • High school diploma or GED required, • Must pass company-administered welding tests, • Proficient in MIG, Flux Core, or Stick welding; TIG experience a plus., • Familiarity with welding carbon steel and stainless-steel materials., • Strong attention to detail, safety awareness, and teamwork., • Ability to read, write, and interpret fabrication drawings, understand work instructions, safety procedures, and production documentation in English required., • Basic understanding of welding processes, • Strong attention to detail and organizational skills., • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects, • Must pass initial and ongoing physical or occupational health screenings (e.g., lifting assessment, vision test, hearing test, etc.) Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime or weekend shifts as needed.

Job DescriptionSalary: The Service Manager combines good administrative, customer, andinternalcoaching skills to keep things moving in this critical performance area of the operation. Constant interruptions call for tremendous flexibility, good decision-making and above all good judgment and common sense. Daily Duties for Service Manager • Manages monthly parts/shop supplies budget. Cost of maintenance not to exceed 10% of rental revenue., • Equipment deadline not to exceed 1% of investment at any time. Preventative maintenance program on fleet followed per procedure (when and how to service) and reviewed with branch manager a minimum of once a month., • Reviews maintenance records to schedule dates for recommended service intervals, (250 hour, 500 hour, etc. PM). Equipment listed for over 90 days since last P.M. is not to exceed 30% of inventory. Equipment listed for over 180 days since last P.M. is not to exceed 0% of inventory. Status is to be reviewed with the branch manager on a monthly basis., • Establishes and maintains service records (either electronic or manual) for all equipment within the rental fleet. 100% of all assets with acquisition cost >$5000.00 are to have documented maintenance history records., • 100% of all recoverable warranty claims to be processed and recovered in a timely manner., • 100% of all work orders to be completed and entered into the system on a daily basis., • 100% of all estimates for suspected customer damage to be completed within 48 hours of identification., • Customer to be invoiced immediately uponapprovalof Rental Manager, • 100% of all field service calls to be logged and tracked:, • No more than 2 hours elapsed from time of customer call to time of mechanic on site., • Customer to be notified at completion of repair., • Operators manuals to be sent with 100% of required machines., • 100% of all applicable rental ready machines to have current:, • ANSI inspection, • Department of Transportation (DOT) inspection, • Crane Certification, • Manufacturer required safety modifications, • Check-in/Check-out sheet, • 100% of units in the yard have quality control service tags attached., • Shop area to be maintained to OSHA required standards at all times., • Mechanic overtime not to exceed 10% of regular time., • At all times, no less than 80% of all units in the yard are on the ready line., • 100% of management requests, special assignments or projects to be completed within the specified time., • Other responsibilities: Administrative: • Sets priorities within the shop for all mechanics, and equipment repair to maximize fleet utilization and employee productivity., • Orders and receives spare parts, maintaining adequate inventory levels., • Allocates parts expense and shop labor to machines through a work order system., • Trains mechanics directly, and routinely schedules manufacturers technical training for individualteam memberskill enhancement., • Sets up and maintains a supply of shop tools for all service personnel use., • Strong administrative and relationship skills to keep all repair tasks flowing in a timely manner while documenting parts and labor costs., • Identify other service shops for potential outsourcing repair of rental equipment. Customer Relations: • Handles customer service calls for equipment failures, taking appropriate and prompt action., • Consults with the Rental Manager, deciding whether to repair or exchange rental equipment on the job-site., • Involved in some customer training concerning daily maintenance and safe operation of equipment., • Notify the customers outside sales rep.beforebilling for damages. Technical: • Establish maintenance and repair standards for each piece of rental equipment., • Has specific brand training on fleet equipment., • Must be able to teach other mechanics how to maintain and repair equipment. Position Profile: • Dominate Skills Required Candidates must have great people skills, enthusiastic personality, a proven communicator,and ability to teach mechanical techniques. Secondly, sound organizational skills with the ability to coordinate programs and logistics associated with the programs. Mechanical aptitude is required in this position. • Technical Requirements, • A working knowledge of the industry., • Factory training from Linde and Kion

Job Description Location: Multiple locations across Houston, TX (Blalock/Memorial, The Woodlands, Cypress, Sienna) Company: HBP - Adams Automotive & Now Auto Care About Us At Adams Automotive and Now Auto Care, we’re not just another repair shop — we’re a fast-scaling, performance-driven platform company. In just a few years, we’ve grown from $3M to over $50M in annual revenue, and we’re on track to surpass $100M+ within the next 24 months. With six thriving locations across the Houston area and a proven operational system, we’re building something that’s redefining the future of the automotive service industry. We’re looking for serious professionals ready to level up and lead with us. Who Thrives Here Our top performers aren’t always “car guys.” They’re competitive, disciplined, and thrive in fast-paced, customer-focused environments. Some of our strongest hires have come from backgrounds such as: • Former collegiate athletes who bring mental toughness and coachability, • Restaurant or retail managers used to high-pressure operations, • Sales professionals who love performance-based environments, • Individuals with strong academic or professional discipline, • Car enthusiasts who love the industry (a plus, not a requirement) We value hunger, accountability, and the willingness to master a proven system. What You’ll Do • Own the front-of-house experience from greeting to vehicle delivery, • Write and manage service orders with a focus on accuracy and timeliness, • Deliver clear, confident recommendations to customers, • Collaborate with technicians to keep workflow efficient, • Educate customers and upsell services when appropriate, • Follow our proven "Key to Key to Callbacks" process What’s in It for You This is not a shift job. This is a real career opportunity with high-level coaching, advancement potential, and financial upside. Compensation & Benefits • Base pay plus commissions: total earnings potential of $100,000–$150,000+, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Ongoing coaching and mentorship from industry leaders, • Relocation assistance available, • Leadership development and advancement path Why Adams Automotive / Now Auto Care • Culture of performance and accountability — not just busy work, • Our shops average over $500,000/month in sales — with one exceeding $1M/month, • Backed by industry-leading operators and infrastructure, • Platform business model means long-term opportunity and multi-location expansion, • Rapid growth means you’ll never be stuck — there’s always a next step here Requirements • Previous experience as a service advisor, writer, or customer-facing sales role, • Mechanical knowledge (either hands-on or strong familiarity with repairs), • Confident communicator who can build trust quickly, • Strong organizational and time management skills, • Commitment to a high-performance, team-oriented culture Locations Hiring • Adams Automotive – Memorial (Blalock), The Woodlands, Barker Cypress Ready to Level Up? This is your opportunity to join a high-growth platform and be a part of something bigger. If you’re ready to compete, grow, and win — apply now. Contact: Gilbert F. Recruitment Account Manager, HBP Phone: (346) 845-1711 Email: Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Referral program, • Relocation assistance, • Retirement plan

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function – Assist in the day-to-day management of a location ensuring that parking operations are handled within contractual guidelines of the specific location, adhering to company policies and procedures, fostering good client relations and promoting a professional image and approach to the business. • Participate in programs to improve client and customer satisfaction., • Assist in the management of day-to-day activities of the assigned locations., • Assist with management duties as assigned., • Courteously assist customers., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Assist with cleanup of debris, water, oil spills and etc., • Substitute for any position, if necessary., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage., • Complete other duties as needed. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience - Minimal high school diploma or equivalent and a minimal month related experience or training; or equivalent combination of education and experience. Oral Communication - Speaks clearly; Listens and gets clarification; Responds well to questions. Written Communication - Writes clearly and informatively; Able to read and interpret written information. Customer Service – Maintains positive attitude. Responds to requests for service and assistance. Adaptability - Adapts to changes in the work environment; Able to deal with change, delays, or unexpected events. Judgment - Exhibits sound and accurate judgment. License Requirement - The employee will be required to have and maintain a valid state-issued driver’s license with a current address and acceptable driving record. Physical Demands - These physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands and fingers, handle or feel objects and to talk. The employee is occasionally required to climb or balance; stoop, kneel or crouch. The employee must be able to lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, peripheral vision and ability to adjust focus. Salary Range: $18.00 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Purvis Industries is a leading distributor of bearing, mechanical power transmission, electrical, fluid power, industrial products, and conveyor systems. We are actively seeking a sales-focused product and application expert to lead our bulk material handling efforts. Purvis is more than just a distributor – we have in-house engineering, service, and contractor resources that give our team the capabilities to take care of the customer with a single call. We have a great team and provide our team members with challenging and fun opportunities to grow both professionally and personally. Our customer base includes such diverse industries as oil & gas, aggregate, cement, food & beverage, mining, and many more. The bulk material handling sales engineer will work with our field sales personnel to grow our sales in unit handling conveyors and systems for new and existing customers. They will accomplish this through direct sales calls throughout the assigned Purvis geographical area and via electronic means (Teams, phone, video chat). They will assist with new applications (sizing, specifying, and designing) and existing applications (troubleshooting, repair, or replace). Additionally, they will support our internal engineering design teams in assisting in the design and application of bulk material handling. The day-to-day work of the Application Sales Engineer involves meeting with customers and/or team members, providing technical advice and assistance on product selection and sizing, creating proposals or assisting in proposals with suppliers and team members, providing training to customers and team members, and assisting with product-specific marketing such as eCommerce. As an Application Sales Engineer, your responsibilities will include but are not limited to: · Directly participate in sales efforts to close orders · Coordinate bulk material handling bulk material handling with various Branches and Regional Managers · Identify target accounts and prospects · Work with the marketing team to produce marketing materials and events promoting unit and package handling. · Provide marketing suggestions for social media posts and other digital content · Utilize AutoCAD, Solidworks, and manufacturer-provided software such as HEROES or HyCAD · Provide advanced-level technical application support via phone, video conference, or in person · Stay current on new products and technologies and educate Customers and Purvis Team Members about these new developments · Determine final disposition of warranty claims and work with suppliers to resolve difficult cases · Produce and present technical training for Customers and Purvis Team Members about bulk material handling products. Other duties as assigned by Management. Skills & Abilities · Strong knowledge of bulk material handling principles and creative problem-solving · Strong customer service and communication skills · Strong work ethic and attention to detail · Ability to read and understand technical drawings · Good driving record Education & Experience · Prefer a B.S. in Engineering or Mechatronics, or equivalent experience · Five (5) years of bulk material handling work Job Type: Full time, 8 hour days M-F Travel: up to 50% domestic Pay: Commensurate with experience, car provided Benefits Available: · Medical Insurance · Dental Insurance · Vision Insurance · 401(k) with company matching · Flexible Spending Account · Paid Time Off · Paid Holidays · Short-Term / Long-Term Disability · Life Insurance Purvis Industries is an Equal Opportunity Employer and promotes a drug free workplace.

Job DescriptionConcrete Foreman $1,400+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: • Must have experience in the concrete repair industry, • Must provide verifiable refences, • Ability to conduct JSA/toolbox talks, enforce OSHA standards, and ensure proper use of PPE and surface prep equipment, • Perform and oversee concrete repairs, • Proficiency in Microsoft Offi ce and the ability to read project plans/specs, • Bilingual (Spanish preferred), • Hours vary by project. Typical schedule is Monday–Friday, 7:00 AM – 4:30 PM., • Must be available for overtime, weekend work, and travel as required. Duration: • Temp to perm after probationary period How to Apply: • Apply & Receive offers NOW! Download Savard 24/7 App!, • Call us at 225-930-0685 or 281-930-5551, • Job ID#54763718

Job Description We are seeking an experienced Pipe Fitter to install, assemble, and maintain piping systems for commercial and industrial applications. The ideal candidate will have experience working with various piping materials and ensuring high-quality installations that comply with industry standards and regulations. Key Responsibilities: • Install, inspect, and repair piping systems, including water, gas, and industrial piping., • Cut, thread, weld, and assemble pipes using various tools and techniques., • Read and interpret blueprints, schematics, and specifications to determine the layout and installation of piping systems., • Ensure compliance with safety regulations, industry codes, and project requirements., • Test piping systems for leaks using pressure gauges and other testing equipment., • Work closely with other trades, including welders, plumbers, and general contractors., • Maintain an organized and safe work environment, adhering to OSHA standards., • Train and mentor apprentices and junior pipe fitters.Qualifications:, • High school diploma or equivalent., • Minimum of 3-5 years of experience in pipe fitting for commercial or industrial projects., • Ability to read and interpret blueprints, technical drawings, and piping schematics., • Experience working with a variety of pipe materials, including steel, copper, and PVC., • Proficiency in using pipe fitting tools, including cutting, threading, and welding equipment., • Strong problem-solving and troubleshooting skills., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license with a clean driving record., • Ability to pass background check and drug screening.Preferred Skills:, • Certification in pipe fitting or welding., • Experience with industrial piping systems and HVAC piping., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description DESCRIPTION: (Including but not limited to) Working within a team environment, the Blast Operator position is responsible for the blasting duties centered on ensuring parts to be coated are cleaned and prepped by customer specifications as contained within the work order. KEY FUNCTIONS • Will operate in machine blast operations, forcing abrasive material onto a component's surface through a nozzle., • Loads parts into sandblast equipment, maintains adequate supply of blast sand in hopper., • Configure and run blast machines in accordance with the customer’s specifications., • Collect materials, tooling, and blast products prior to initiating operation., • Use hand tools to repair, clean, and adjust equipment., • Comply with all company policies and procedures including Health, Safety and Quality Assurance policies., • Checks work visually, makes minor decisions; detects and reports defective items and unusual conditions to proper supervision., • Sand blasts parts following established methods and procedures to remove surface contaminants and imparts proper surface finish. WORK QUALIFICATIONS: Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Proven proficiency in fundamental shop math, including handling fractions and decimals, • Proficient in the use of hand and power tools for successful job performance, • Ability to work in a team environment and effectively communicate, • Ability to follow directions and procedures, • 2-5 years of Industrial Gas Turbine Repair experience Required: HS diploma or GED WORK ENVIRONMENT: Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential functions. • Willingness to work a flexible schedule to meet the demands of the role., • Must be able to sit, stand and walk for long periods of time or until the end of the assigned shift. ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job DescriptionDescription: Who we are: America’s Auto Auction is a rapidly growing company headquartered in Camel, IN. We are one of the nation’s premier auto auction groups with sites across 19 states. America’s Auto Auction has developed a platform built on lasting relationships and superior service that leverages the best of vehicle offerings. What you’ll do: The Mechanic is responsible for diagnosis and repair of all vehicles to ensure that they are up to safety standards. Ensure that vehicles are ready for sale. The Licensed Mechanic exhibits superior customer service at all times. Responsibilities: • Always provide efficient and courteous service to all customers., • Always exhibit ‘hands on’ and direct approach with customers., • Diagnoses, coordinates inspection, repair and service of mechanical, electrical, and electronic systems and components of cars, vans, and light trucks., • Carries out complex engine tune-ups, diagnose complicated faults or malfunctions to determine extent of repairs required., • Adjusts, repairs, or replaces parts and components., • Oversee the cleaning, lubricating and other routine maintenance work on equipment., • Disassemble, overhaul, and reassemble engines and other major units as necessary., • Maintain clean, orderly work area free of safety hazards., • Work well independently as well as a team player, • Timely communication of issues that may be deemed as detrimental to the success of operations to Management., • Performs other duties as necessary. Requirements: • Requirements/Qualifications:, • High School Diploma, mechanical coursework completion, • Minimum 5 years’ experience, • Should be highly organized, self-motivated, and self-disciplined. Must be able to read, write and speak English fluently. Ability to operate all types of vehicles., • Must be at least 18 years of age., • Must possess a valid driver’s license., • Environment: The environment of the Mechanic involves working at the Auction and on the road representing the company upholding the highest standards of customer service. Those working in this position are subject to temperature changes, all types of weather conditions, elevated noise levels and at times fumes and odors associated with vehicle exhaust at times., • Why work at America’s Group:, • Joining America's team comes with a host of employee benefits, including comprehensive healthcare coverage (medical, dental, vision), robust retirement planning opportunities through our 401(k) program, and generous paid time off benefits, encompassing sick leave, parental leave, and PTO. We are committed to fostering a supportive and rewarding work environment where your well-being and professional growth are a top priority., • America’s is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. America’s provides reasonable accommodations when requested by a qualified applicant or employee with disability unless such accommodations would cause an undue hardship.

Job DescriptionCompany Description SMIT Salvage has an extensive track record and its clients include many leading insurers. SMIT Salvage has specialized equipment and expert staff, and it can respond to incidents throughout the world 24/7. Operations are managed from four strategically located locations with respect to major international shipping routes: Rotterdam, Houston, Cape Town, and Singapore. The offices have a 24-hour link to clients, ships, the other offices of the Boskalis Group and agents worldwide. Working at Boskalis is about creating new horizons and sustainable solutions. In a world where population growth, an increase of global trade, demand for (new) energy and climate change are driving forces, we challenge you to make your mark in finding innovative and relevant solutions for complex infrastructural and marine projects. Within a vibrant company culture, you will be working as part of a diverse, international team of experts. We offer you the opportunity to realize your full personal potential and expand your professional career by creating new horizons. Together! Job Description Make your mark as a Warehouse Mechanic at Smit Salvage! As Warehouse Mechanic, you are responsible for the safe operation, maintenance, storage, and readiness of designated company equipment at our Houston warehouse. You ensure that assets are properly maintained, certified, and available for projects, and you coordinate equipment mobilization and demobilization in close cooperation with project teams. You provide hands-on technical support during equipment preparation, testing, troubleshooting, and repairs—both in the warehouse and in the field when required. In addition, you maintain accurate equipment and maintenance data and play an active role in the implementation and day-to-day use of the Equipment Management Platform (EMP). Your responsibilities as a Warehouse Mechanic • Operate, inspect, maintain, and store designated equipment., • Execute planned and unplanned maintenance activities., • Support mobilization and demobilization of equipment for projects., • Provide technical support to project teams., • Maintain equipment records, documentation, and reporting in EMP., • Contribute to cost control, spare-part management, and tender input., • A technical or vocational education in mechanical, electrical, or related disciplines., • Experience in equipment maintenance, mechanical repair, and technical warehouse operations., • Experience with maintenance planning, troubleshooting, and equipment mobilization/ demobilization., • Certified or experienced forklift operator., • Good command of English (spoken and written)., • Experience in marine, offshore, industrial, or heavy-equipment environments., • Familiarity with asset or equipment management systems (e.g. EMP)., • Experience with specialized equipment (e.g. diving systems).Qualifications What you can expect • Career opportunities: We challenge you every day to get better. Together we realize your full personal and professional career by creating development opportunities., • Your team: As a Warehouse Mechanic you will work for SMIT Salvage Houston. You will work for one of the largest salvage companies in the world. You will also work with various other colleagues who are part of the worldwide Salvage team., • Where you will work: You will work at our warehouse in Houston., • Full-time: The Warehouse Mechanic position is full-time (40 hours per week)., • Procedure: You can easily apply by filling in the online application form and uploading your CV and cover letter. You will always receive an immediate confirmation of receipt by e-mail. It is not possible to apply by email, the contact form or by post. Depending on the position, we invite you for two or more job interviews. If you have successfully completed all steps, you will receive an offer from us and we would like to welcome you to Smit Salvage Houston! Additional Information Interested? Apply by filling in your details and uploading your CV and cover letter on our careers site. Please note: Boskalis never requests a financial contribution to arrange visas or other documents related to a job vacancy. Be wary of individuals who pretend to be our recruiters and do ask for such contributions. Disclaimer for Recruiters and Recruitment Agencies We appreciate your interest in our vacancies and understand that your candidate might be enthusiastic about this exciting opportunity. However, our recruitment process is not structured this way, at Boskalis we handle recruitment ourselves. There fore we do not accept unsolicited applications or CVs from recruitment agencies. Any submission will be treated as a direct application.

Job Description Heniff Transportation provides best-in-class supply chain solutions to our valued customers by utilizing our network of supply chain services and resources. We focus on creating extraordinary growth and value across the markets, industries, and customers we serve through outstanding safety, innovation, and service performance. We accomplish this through one of the largest, fully integrated networks of terminals, transload and tank wash facilities in North America and now in Canada. We strive to be the BEST at everything we do. Position Summary Responsible for performing preventative maintenance, special inspections and general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and Company standards. Duties and Responsibilities: • The Tank Trailer Mechanic diagnoses and repair trailers., • Perform annual/systematic periodic inspections in order to ensure equipment meets federal FHWA standards., • The Mechanic performs HM inspections, • The Mechanic adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous wastes. Education and Experience: • High school diploma, GED, or equivalent, • 1 years of experience working on chemical, food grade, dry bulk, and chassis tarilers, • Must take and pass training classes, • Must have own tools Language Skills: • Ability to read, write and speak English proficiently Physical Demands: • Use arms to reach and stretch; hands and fingers to grasp, move, or assemble objects of a variety of sizes, and to also manipulate a variety of objects, tools, devices, and controls., • Use legs to stand for long period of time, maneuver through shop environment, and perform a variety of locomotive functions which may include crawling, kneeling, crouching, sitting, and carrying or relocating objects weighing up to 75 lbs., • Perform broad locomotive motions, at times in a rapid fashion, such as bending, twisting, balancing in stable and unstable positions, and reaching, with the capacity to use bodily muscles to sustain these motions for long periods of time without fatigue., • Perform fine locomotive motions, at times in a rapid fashion, that involve the use of fingers for the manipulation of tools., • Adjust, execute, maintain, and repeat all bodily motions, postures, and stances in order to accommodate rapid and gradual changes within the work environment as necessary., • Visually identify and focus on objects at close and distant ranges, and at central and peripheral locations, with the ability to identify their distances, depths, and colors in environments of varying lighting., • While looking forward, see objects or movements that are off to the side., • Use auditory senses to hear and isolate specific sounds, understand speech, and recognize their differences in a variety of environments of varying sound levels., • Speak clearly and at necessary volumes in a variety of environments of varying sound levels., • Medical, Dental, Vision, Life, and Disability Insurance, • 401(k) Plan + Company Match, • Paid Time Off (120 hours yearly), • Company Paid Holidays, • Paccar Online Training Provided, • $125.00 yearly Boot Allowance, • $1,000 referral bonus, • $1,000 shop bonus per quarter if requirements are met., • $1,000 sign on bonus paid over the course of a year (90 days: $250.00, 180 days: $250, 1 year: $500) Salary Range: Disclaimer: The salary range for this position is $30.00 to $34.00 hourly. This range is based on market data and internal equity. The final offer will be determined by various factors, including the candidate’s experience, education, skills, qualifications, and geographic location. The Heniff Family of Companies, we believe our biggest asset is our people. We are proud to be an equal opportunity employer, hiring and developing individuals from diverse backgrounds and experiences to add to our collaborative culture. Heniff treats all candidates and employees with respect and does not discriminate in our recruiting, hiring, and promoting processes and general treatment during employment, including on the basis of actual or perceived race, creed, color, religion, sex, age, sexual orientation, gender identity and/or expression, alienage or national origin, ancestry, citizenship status, marital status, veteran status, or disability. #hc230069

Job Description Heniff Transportation provides best-in-class supply chain solutions to our valued customers by utilizing our network of supply chain services and resources. We focus on creating extraordinary growth and value across the markets, industries, and customers we serve through outstanding safety, innovation, and service performance. We accomplish this through one of the largest, fully integrated networks of terminals, transload and tank wash facilities in North America and now in Canada. We strive to be the BEST at everything we do. Position Summary Responsible for performing preventative maintenance, special inspections and general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and Company standards. Duties and Responsibilities: • The Diesel Truck Mechanic diagnoses and repair tractors and trailers., • Perform annual/systematic periodic inspections in order to ensure equipment meets federal FHWA standards., • The Mechanic adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous wastes. Education and Experience: • High school diploma, GED, or equivalent, • 1 years of experience working on all makes of trucks, • Must take and pass training classes, • Ability to read, write and speak English proficiently Physical Demands: • Use arms to reach and stretch; hands and fingers to grasp, move, or assemble objects of a variety of sizes, and to also manipulate a variety of objects, tools, devices, and controls., • Use legs to stand for long period of time, maneuver through shop environment, and perform a variety of locomotive functions which may include crawling, kneeling, crouching, sitting, and carrying or relocating objects weighing up to 75 lbs., • Perform broad locomotive motions, at times in a rapid fashion, such as bending, twisting, balancing in stable and unstable positions, and reaching, with the capacity to use bodily muscles to sustain these motions for long periods of time without fatigue., • Perform fine locomotive motions, at times in a rapid fashion, that involve the use of fingers for the manipulation of tools., • Adjust, execute, maintain, and repeat all bodily motions, postures, and stances in order to accommodate rapid and gradual changes within the work environment as necessary., • Visually identify and focus on objects at close and distant ranges, and at central and peripheral locations, with the ability to identify their distances, depths, and colors in environments of varying lighting., • While looking forward, see objects or movements that are off to the side., • Use auditory senses to hear and isolate specific sounds, understand speech, and recognize their differences in a variety of environments of varying sound levels., • Speak clearly and at necessary volumes in a variety of environments of varying sound levels., • Medical, Dental, Vision, Life, and Disability Insurance, • 401(k) Plan + Company Match, • Paid Time Off (120 hours yearly), • Company Paid Holidays, • Paccar Online Training Provided, • $125.00 yearly Boot Allowance, • $1,000 referral bonus, • $1,000 shop bonus per quarter if requirements are met., • $1,000 sign on bonus paid over the course of a year (90 days: $250.00, 180 days: $250, 1 year: $500) Salary Range: Disclaimer: The salary range for this position is $30.00 to $34.00 hourly. This range is based on market data and internal equity. The final offer will be determined by various factors, including the candidate’s experience, education, skills, qualifications, and geographic location. The Heniff Family of Companies, we believe our biggest asset is our people. We are proud to be an equal opportunity employer, hiring and developing individuals from diverse backgrounds and experiences to add to our collaborative culture. Heniff treats all candidates and employees with respect and does not discriminate in our recruiting, hiring, and promoting processes and general treatment during employment, including on the basis of actual or perceived race, creed, color, religion, sex, age, sexual orientation, gender identity and/or expression, alienage or national origin, ancestry, citizenship status, marital status, veteran status, or disability. #hc230058

Job Description We are looking for an Automotive Painter to join our team! The Automotive Painter is responsible for painting vehicles from a variety of makes and models to customer specifications at a high level of skill and quality. If you have experience with automotive paint and are looking for a stable opportunity with no prospecting required, then this may be the job for you! Responsibilities: • Receive automotive inventory and review pre-approved paint work, • Mix paint and paint vehicles and panels as approved on the repair order, • Properly spray the application of primers, sealers, basecoats, and clearcoats, • Produce sprayed finishes with little or no dirt and a consistent gloss and texture,e matching the OEM finish with minimal to no need to sand and buff, • Blend and apply 2- and 3-stage colors as needed, • Work closely with prep staff and other painters to meet work demands as a team., • Partner with additional departments as applicable to ensure customer satisfaction, • Maintain company-provided tools and additional equipment in accordance with company standards. Requirements: • Previous experience in automotive paint, • Must be 18 years of age or older, • Must have a checking/savings account or pay card with routing numbers for direct deposit, • General understanding of automotive details and features., • Ability to sit, bend, squat, and hold various positions for long periods of time, • Strong communication skills., • Ability to prioritize tasks and set deadlines., • Ability to work well with multiple departments, • Motivated, personable, and a team player with a strong work ethic., • The ability to operate a manual transmission is a plus. If interested, please contact Shaina at Powered by JazzHR ZbABDyDbgJ

Job Description Job Title: Working Field Foreman Job Type: Full-Time Industry: Concrete Repair, Protection, and Structural Strengthening Job Overview We are seeking an experienced and motivated Working Field Foreman to lead and actively participate in concrete repair, protection, and strengthening projects in commercial, industrial, and marine environments. This position requires hands-on leadership, strong safety awareness, and the ability to manage crews while ensuring projects are completed efficiently and to high-quality standards. Compensation & Benefits • Pay: $25.00 – $28.00 per hour (typically 40 hours per week plus overtime opportunities), • Benefits Include:, • Medical, dental, and vision insurance, • Paid vacation, • Supervise and lead crews of 3–10 workers on active job sites, • Ensure work is completed safely, accurately, and efficiently, • Perform and oversee concrete repairs, including spall and crack repair, and shotcrete applications, • Install waterproofing systems and protective coatings such as epoxy and urethane, • Assist with structural strengthening methods, including carbon fiber installation and pile jacket systems, • Conduct Job Safety Analysis (JSA) and toolbox talks, • Enforce OSHA safety standards and ensure proper use of PPE, • Complete and submit daily timesheets and job documentation, • Coordinate material needs and procurement, • Minimum of 3 years of experience in concrete repair, restoration, or related construction field, • Ability to read and interpret project plans, drawings, and specifications, • Ability to lift up to 100 lbs, • Comfortable working at heights, including scaffolds and ladders, • Valid driver’s license required, • Must pass pre-employment and random drug screenings, • Must pass background checks, • Must be authorized to work in the United StatesPreferred Qualifications, • Bilingual in English and Spanish, • OSHA 30 certification, • TWIC card and/or HASC Basic Plus certification

Job Description Heniff Transportation provides best-in-class supply chain solutions to our valued customers by utilizing our network of supply chain services and resources. We focus on creating extraordinary growth and value across the markets, industries, and customers we serve through outstanding safety, innovation, and service performance. We accomplish this through one of the largest, fully integrated networks of terminals, transload and tank wash facilities in North America and now in Canada. We strive to be the BEST at everything we do. Position Summary Responsible for performing preventative maintenance, special inspections and general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and Company standards. Duties and Responsibilities: • The Diesel Truck Mechanic diagnoses and repair tractors and trailers., • Perform annual/systematic periodic inspection in order to ensure equipment meets federal FHWA standards., • The Mechanic adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous wastes., • Electrical systems, • Suspensions, • Brakes Education and Experience: • High school diploma, GED, or equivalent, • 5 years of experience working on all makes of trucks, • Must take and pass training classes, • Must have own tools Language Skills: • Use arms to reach and stretch; hands and fingers to grasp, move, or assemble objects of a variety of sizes, and to also manipulate a variety of objects, tools, devices, and controls., • Use legs to stand for long period of time, maneuver through shop environment, and perform a variety of locomotive functions which may include crawling, kneeling, crouching, sitting, and carrying or relocating objects weighing up to 75 lbs., • Perform broad locomotive motions, at times in a rapid fashion, such as bending, twisting, balancing in stable and unstable positions, and reaching, with the capacity to use bodily muscles to sustain these motions for long periods of time without fatigue., • Perform fine locomotive motions, at times in a rapid fashion, that involve the use of fingers for the manipulation of tools., • Adjust, execute, maintain, and repeat all bodily motions, postures, and stances in order to accommodate rapid and gradual changes within the work environment as necessary., • Visually identify and focus on objects at close and distant ranges, and at central and peripheral locations, with the ability to identify their distances, depths, and colors in environments of varying lighting., • While looking forward, see objects or movements that are off to the side., • Use auditory senses to hear and isolate specific sounds, understand speech, and recognize their differences in a variety of environments of varying sound levels., • Speak clearly and at necessary volumes in a variety of environments of varying sound levels., • Medical, Dental, Vision, Life, and Disability Insurance, • 401(k) Plan + Company Match, • Paid Time Off (120 hours yearly), • Company Paid Holidays, • Paccar Online Training Provided, • $125.00 yearly Boot Allowance, • $1,000 referral bonus, • $1,000 shop bonus per quarter if requirements are met., • $1,000 sign on bonus paid over the course of a year (90 days: $250.00, 180 days: $250, 1 year: $500) Salary Range: Disclaimer: The salary range for this position is $35.00 to $39.00 hourly. This range is based on market data and internal equity. The final offer will be determined by various factors, including the candidate’s experience, education, skills, qualifications, and geographic location. The Heniff Family of Companies, we believe our biggest asset is our people. We are proud to be an equal opportunity employer, hiring and developing individuals from diverse backgrounds and experiences to add to our collaborative culture. Heniff treats all candidates and employees with respect and does not discriminate in our recruiting, hiring, and promoting processes and general treatment during employment, including on the basis of actual or perceived race, creed, color, religion, sex, age, sexual orientation, gender identity and/or expression, alienage or national origin, ancestry, citizenship status, marital status, veteran status, or disability. #hc230053

Job Description About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Contract-to-Hire role based in St Louis, Indianapolis, or Houston areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description The City of Pearland, TX is seeking to hire a full-time Maintenance Crew Leader to lead and improve aspects of the day-to-day operations of our Utilities - Distribution and Collections division. Do you have the ability to effectively lead a team within a fast-paced setting? If so, you may be perfect for this position! Our Distribution & Collections Maintenance Crew Leader earns a competitive hourly wage of $30.72- $33.25/based on qualifications/and experience. Additionally, the city pays all premiums for our employees' dental, long-term disability protection, and life insurance, plus the majority portion of the medical premium for employees and their dependents. We also offer a retirement plan through the Texas Municipal Retirement System (TMRS) with a 2:1 employer match, life insurance, disability, access to the city's recreation fitness center, employee assistance program, educational assistance, 11 paid holidays and 2 designated paid holidays, paid vacation, sick leave, and an active wellness program focusing on physical, mental, and financial health. ABOUT THE CITY OF PEARLAND Pearland is one of the fastest-growing cities in Texas due to affordable housing, outstanding schools, safe neighborhoods, and superb quality of life. Ranked among the top ten safest cities in Texas, Pearland residents know their families are safe and secure in the community and surrounding areas. Our close proximity to Houston, just a short 20-minute drive to downtown, allows residents to experience all the city has to offer, including professional sports, world-class cultural amenities, and recreation. Employees of the City of Pearland use multi-directional communication and cross-functional teams to promote a greater understanding of the organization by employees at all levels. We have created a culture of continuous learning that encourages and supports employee development and growth. Our work environment is one where innovation is not only supported but encouraged. A DAY IN THE LIFE AS A DISTRIBUTION AND COLLECTIONS MAINTENANCE CREW LEADER Under general supervision, work with and provide direction to a crew engaged in the repair and maintenance of the City's water and sewer system. Supervisory Functions: Lead the work activities of assigned crew in Water & Sewer Line Maintenance. Carries out crew leader responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Essential Functions: • Regular and timely attendance at work., • Direct the work activities of assigned subordinate personnel; schedule and review the work activities of assigned crew; perform work with workers supervised., • Interpret policies to workers; support and enforce safety regulations., • Maintain and service water lines by digging up and exposing water main lines for repair., • Perform water and sewer taps; replace meters, and repair manholes as needed., • Provide maintenance to fire hydrants by flushing out system, cleaning and/or replacing old parts, and painting hydrant., • Ensure that worksite is properly secured according to safety standards by setting up barricades in and around site., • Clean up area around excavation replacing sand and sod., • Inspect and maintain assigned equipment by checking lights, fluids, brakes; keep oiled and greased; clean, and in good working condition., • Report any and all problems as soon as they are noticed; maintain daily work orders and prepare daily work reports., • Provide communication to supervisor of all unsafe conditions on the job., • Analyze and resolve work problems or assists workers in solving work problems., • High school diploma or equivalent is required., • Minimum of two (2) years of experience in water lines maintenance; six (6) years of experience in the maintenance of water lines, preferred., • Some experience in directing the activities of subordinate personnel, preferred., • Valid Texas Driver's License, • Class B Commercial License required, • Class A Commercial License preferred, or ability to obtain within 6 months of hire, • Class C Wastewater Treatment, • Class I Wastewater Collections Job Posted by ApplicantPro

Job Description Description: As Project Engineer, you'll lead the technical performance of all engineering phases on a variety of tactical integrity maintenance projects such ILI maintenance digs, cathodic protection system remediation, and asset integrity maintenance remediation. Maintaining focus on continuous improvement and implementing and applying engineering management techniques within our project life cycle process will improve performance, quality and cost control and safety. The ability to collaborate and coordinate with others to provide technical mentorship, identify and resolve sophisticated problems and develop innovative approaches to address issues that have significant cost and schedule impact are keys to success! Your work will challenge you, and with our Core Values to guide you, youll quickly learn and grow with us. Responsible for a diverse range of complex assignments requiring the use of experience, innovation and judgment and may direct work of other engineers and/or support staff. Plans and conducts own work, exercising substantial latitude for unreviewed decisions. Demonstrates technical expertise in specialty, geographic area, or operational function. Applies specialized knowledge in the effective completion of projects. Prepares and delivers presentations and is able to lead meetings and discussions. Anticipates internal/external customer needs; assesses requirements and identifies solutions. Maintains a strong understanding of industry and operational requirements. Works on a combination of engineering specialties covering more than one discipline. Interprets internal/external business challenges and improves products, processes, or services. Collaborates with teams to ensure compliance, build improvement plans and meet training needs. Champions best practice safety standards. Monitors and controls costs and resources associated with projects. Responsibilities/Expectations: Be a quick learner regarding Williams projects processes and execute all efforts while following William's policies and procedures as well as various laws and codes required for each project. Develops engineering execution strategies to meet overall project objectives; works with internal partners on management of quality control and project timeline. Coordinates with project team and communicates project drivers; develops approaches to accommodate concerns. Partners with contractors and project teams to ensure that technical aspects of the project meet expectations, quality standards, and execution strategy; identifies and implements technical improvements. Addresses the technical content of purchase orders to ensure they contain accurate technical and commercial terms. Coordinates internal resources to ensure Requests For Information are promptly resolved. Develops commissioning plans, closes projects and ensures accurate documentation of files, records, databases, and drawings to meet regulatory requirements. Provides technical expertise and recommendations during project standards reviews. Accountable for small projects or programs with minimal risks and resource requirements. Interface with consultant engineering firms and internal stakeholders. Other duties as assigned. Education/Years of Experience: Required: Bachelor's degree in engineering and minimum five (5) years of progressive engineering experience in the natural gas or petrochemical industry including two (2) years in a similar project engineering role (in asset integrity, cathodic protection or corrosion mitigation). Other Requirements: Demonstrates excellent organizational/interpersonal skills and safety as the utmost priority. Proficiency in Microsoft Office Application and PC skills. Advanced knowledge of the engineering workflow and Project Life Cycle processes. Advanced knowledge of engineering design principles and applicable design guides and standards related to an engineering field. Intermediate knowledge of other engineering subject areas design guides and standards. Demonstrated ability in interpreting engineering deliverable content as assigned. Proficiency with construction & constructability practices relevant to integrity maintenance remediation. Strong understanding of processes and procedures for project controls and estimating. Strong understanding of industry accepted repairs for integrity maintenance projects. Strong understanding of PHMSA regulations code 192 and 195 with relation to integrity maintenance program management. Familiar with NDT technologies Proficiency of procurement & contract administration, business & financial insight, management techniques & administrative practices. Strategy Planning • Preferred: Experience in Power BI, • Preferred: Experience in Risk Analysis, • Preferred: Lead Certification, • Preferred: Experience in pipeline construction, • Preferred: Experience in system flow analysis, • Preferred: Experience in Aconex, • Preferred: PE certification., • Preferred: Corrosion control management certification, • Preferred: Asset integrity program management certification Skills: ILI maintenance digs, cathodic protection remediation, corrosion mitigation, and integrity repair methods., natural gas or petrochemical industry Must Have Hands-on experience with ILI maintenance digs, cathodic protection remediation, corrosion mitigation, and integrity repair methods. Strong understanding of Integrity Management Programs (IMP) and regulatory compliance requirements. Bachelor's degree in engineering and minimum five (5) years of progressive engineering experience in the natural gas or petrochemical industry including two (2) years in a similar project engineering role (in asset integrity, cathodic protection or corrosion mitigation) Experience developing execution strategies, managing cost/schedule, coordinating RFIs, commissioning, and project closeout. Advanced knowledge of pipeline design principles, applicable codes/standards, and ability to interpret engineering deliverables. Strong understanding of industry-accepted repair methods (sleeves, composite wraps, cut-outs, recoating) and familiarity with NDT technologies.

Job Description Daikin Comfort Technologies Distribution, Inc. is seeking a professional, skilled individual for our HVAC Branch Manager position for our branch operations group located at our Pearland, TX branch. The Branch Manager oversees the branch’s operations and staff with accountability for sales (<$5 million), customer service, profitability, productivity, and loss prevention. Leads branch operations team (3-6 people) to achieve strategic goals related to revenue generation, profit attainment, and growth goals including market share through utilization of effective sales management techniques. Communicates and enforces store goals and policies and ensures compliance with security, sales, and safety and recordkeeping practices. Maintains accurate records of purchases, sales, and requisitions and reviews store reports to identify areas of waste. Why work with us? Benefits are effective on day one for all full-time direct hires. Training programs are available to help guide team members and develop new skills. Growth Opportunities - there are immense opportunities to grow your career. You will be part of a Global Company - our family brands are backed by Daikin Industries, Ltd. May include: • Manage and oversee the day-to-day operations of the branch including staffing and ensure successful and timely completion of assigned duties of all personnel. Review and approve hours worked and PTO using Kronos., • Conduct periodic audits to ensure work is compliant with the established protocols and processes and objectives - meeting customer and branch expectations., • Maintain sales – review/edit, credits, negative inventory, damage inventory and cash reconciliations. Communicate regularly with branch customer base to establish and maintain strong relationships. Enter all sales calls in CRM., • Responsible for building and maintaining morale in the branch by demonstrating leadership qualities and setting an example for staff, promoting teamwork both within the branch, local team and within the region. Provide knowledge and skill development opportunities for employees with proper training and guidance for them to reach their full potential and have growth opportunities. Ensure employees complete all assigned training in a timely manner., • Effectively coach, counsel, and hold employees accountable. Collaborate with Human Resources regarding disciplinary actions., • Develop plans for increased branch profitability/productivity and drive continuous improvement processes., • Process purchase orders, research low stock and receivables and process branch payables, audit cash drawers and truck metrics. Remain current with warranty processing and follow up quickly on rejections., • Oversee all aspects of profit center (operations, sales, admin, etc.) working closely with Credit Department at Corporate to determine appropriate credit level and resolve any credit issues., • Stay current with cycle counts and keep dead stock at a minimum., • Maintain ample levels of inventory to meet delivery and service expectations of all branch customers., • Review P hold safety meetings, security reports and maintain facility., • Complete all tasks on the Branch Manager's monthly/daily checklist and act as a safety leader. Conduct weekly safety committee meetings. Complete any Flash reports within the required timeline and communicate issues/injuries immediately., • Oversee branch and warehouse appearance, housekeeping, maintenance, and repair., • Provide Regional Operations Manager (ROM) any requested branch specific information /reports and provide vital information in a timely manner., • Maintain a 93%, or higher, audit score, • Maintain a working knowledge of company’s benefits and employee handbook policies. Ensure employees are following safety protocols including maintaining an organized and clean work environment,, • Conduct mid-year and annual performance appraisals for all direct reports through the online Performance Engagement platform., • May work outside regular working hours in case of emergencies within the branch as required., • Ensures work is aligned with the ROM’s expectations, goals, and vision, • Accountable for implementation of policies, processes, and procedures for short-term results, • Decisions and problem-solving are guided by policies, procedures and business plan; receives guidance from Senior Manager/Director, • Works on difficult to moderately complex issues and projects, • Provides guidance and training to subordinates, • Has authority to hire, recommend pay, establish performance and recommend for termination, • Knowledge of warehouse/inventory management and material handling equipment such as forklifts, • P&L understanding, • HVAC knowledge strongly preferred; or ability to quickly learn HVAC products/parts, • Proven customer service experience with high level of customer satisfaction, • Proven leadership, coaching/mentoring and team-oriented mindset along with effective delegation of duties., • Effective verbal and written communication skills and interpersonal skills, • Strong organizational and time management skills, • High level of attention to detail and compliance and results driven., • Excellent problem-solving skills, with ability to apply sound judgment, • Ability to build and maintain positive relationships with customers, vendors, and employees, • Experience leading a team of employees towards a common goal, • Ability to apply good judgement and decision-making skills including strong work ethics and integrity., • Working knowledge of MS Office Suite (Excel, Outlook, Word and PowerPoint), • 1 year in a leadership/supervisory role, • High School diploma or GED equivalent. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job DescriptionSalary: Blackstone Industrial provides innovative, high-quality, and sustainable solutions for critical rotating and static equipment. As one of North Americas leading technical service providers, we excel in field services, parts, repairs, and engineering. Trusted by industries such as heavy oil and refining, petrochemical, power generation, energy transmission, and agriculture, Blackstone is shaping the future of compressor maintenance and operation, striving to set new benchmarks. As we expand our operations globally, we are seeking a dynamic and motivated individual to join our team. The QHSE Specialist ensures the companys Health, Safety, and Environmental standards are maintained across all operations. This role provides strategic direction, develops and implements HSE policies and procedures, monitors safety performance, and supports a proactive safety culture.This role serves as the primary catalyst assisting the operations teams in embracing Quality and Safety into their daily operational activities. Thew QHSE Specialist assures customer satisfaction, worker safety and industry standards by managing quality and safety policies, standards, procedures, reporting, programs and practices while driving continuous improvement within the company. Responsibilities • Implement Quality and HSE methodologies into all repair processes, and measure and monitor the effectiveness of controls based on critical industry and client requirements and Blackstones Quality and Safety Management Systems., • Validate Quality and Safety processes by establishing control specifications, measuring production, documenting evidence, determining operational performance qualification, and developing and updating assurance procedures., • Monitor the Ops/Eng led ITP activities specified within the company and client process to ensure quality conformance of products and services., • Effectively interacts with Production, Sales, and Engineering teams to ensure customer satisfaction and QHSE compliance., • Works with suppliers, customers and staff to ensure compliance to QHSE requirements., • Manages and maintains quality inspection and product release programs for incoming and in-process materials, components, processes, and finished goods and services., • Maintains and improves product quality by completing product, service, system, compliance, and surveillance audits; investigating customer complaints., • Collaborates with other members of management during product/system development activities., • Facilitates analysis and coordinates activities related to process/system improvement projects., • Maintains operational data and prepares QHSE reports for management., • Provide/Facilitate training to staff via internal or external sources., • Monitor Key Performance Indicators related to production, budgeting and safety activities., • Perform vendor qualification audits and assist with supply chain development., • Facilitate safety meetings, present stats, KPIs and overall safety initiatives for the company to the teams., • Develop QHSE site specific plans for proposals., • Administration of safety registries and platforms to maintain customer and regulatory requirements. (DISA, ISN, Avetta, Veriforce, NCMS, Various Safety Councils), • Attend occasionally, offsite vendor and client site visits/audits., • Maintain a functioning understanding of basic equipment service and repairs. (be curious), • Support field & shop operations by:, • Training sessions, • Conducting field performance audits, • FLHRAs, JSAs, V.O.I.C.E cards, Incident Reporting, Hazard IDs, • Responds to & participates in the investigation of safety incidents with management., • Develops an effective communication process to make safety priorities and performance visible, • Provides technical support for ongoing problem-solving and safety investigations., • Provides resources and support to the sites joint health and safety committee. (were applicable), • Provides on-the-floor safety coaching and recognition., • Works with WC Insurance on return-to-work strategies and claims management., • Monitor changes to legislation which may impact the QHSE Program., • Ability to handle sensitive information and always maintain utmost confidentiality with tact, diplomacy and integrity. Preferred Education and Experience • Safety Professional Roles., • Auditor Roles., • Post-Secondary Degree or Diploma in a related area of study (ex. Materials, Mechanical Engineering), • 5+ years of direct relatable QHSE supervision., • Experience with WC Insurance and OSHA filing and compliance., • Experience with leading analysis to identify gaps/trends and variances., • Experience with supporting the development and execution of QHSE training programs., • Conducting shop, office and field QHSE audits. Knowledge, Skills, Abilities • Strong interpersonal, administrative and leadership skills are required., • Motivated, self-starter who works well unsupervised and within a team environment., • An effective communicator with the ability to develop positive working relationships across a multitude of business units and personnel., • Exercises good judgment on complex decisions., • Strong analytical, problem solving and troubleshooting skills., • Strong coordination, influencing and organizational skills., • Commitment to improving operations and generating cost-reduction opportunities., • Self-motivated and leads by example., • Ability to independently manage a diverse workload with changing priorities., • Excellent Microsoft applications skills., • Ability to work remotely and independently.

Job Description DALLAS TRAILER REPAIR CO. TRAILER TECHNICIAN Job Summary The Trailer Technician is responsible for performing routine maintenance, diagnostics, and repairs on all trailers and related equipment. This role requires solid knowledge of mechanical tools, service and diagnostic equipment, and repair procedures. Successful candidates will demonstrate strong attention to detail, excellent communication and customer service skills, and the ability to work independently or as part of a team. Key Responsibilities • Inspect, analyze, and diagnose trailers and related equipment for mechanical issues and faulty parts., • Perform requested repairs according to industry standards and manufacturer specifications., • Conduct routine maintenance on trailers and related equipment., • Complete trailer body work and undercarriage repairs (e.g., air bag replacement, cross-members, dolly legs, tandem systems)., • Develop and document action plans for all repairs; follow checklists and established protocols., • Maintain a clean, organized, and safe workspace, including regular care of tools and equipment., • Follow all health and safety regulations and best practices., • Collaborate with coworkers and support team goals while being able to work independently when needed., • Perform other duties as assigned., • Knowledge & Skill Requirements, • Experience: 1–2 years of mechanical or equivalent experience., • Certifications: ASE certifications highly desired but not required., • Must pass pre-employment knowledge/skill test, background check (10-year), and drug/medical physical exam., • Proven mechanical aptitude and basic math skills., • Ability to read and write in English for documentation and communication., • Must have own tools and safety gear (safety glasses, steel-toed shoes, hearing protection). Physical Demands • Heavy Work: Exert up to 100 lbs occasionally, 50 lbs frequently, and 20 lbs constantly., • Frequent activities: Walking, standing, climbing, stooping, crouching, balancing, kneeling, and crawling., • Manual dexterity: Frequent use of hands and fingers for grasping, typing, and operating tools., • Sensory abilities: Talking, hearing, & vision sufficient for detailed inspection, safe operation of tools, machinery, and vehicles. Work Environment Work is performed primarily in a shop setting — both indoors and outdoors. Conditions may include exposure to: • Non-climate-controlled environments / Hot/cold temperature changes, • Dirt, dust, soot, fumes, and other airborne particles, • Moving mechanical parts and electrical equipment, • Chemicals and limited ventilation, • High places, confined spaces, and loud noise, • Proper PPE and adherence to safety protocols are required at all times. Compensation & Benefits Hourly Rate: $25 – $35 (depending on experience and location) Comprehensive Benefits Package Includes: • Medical, Dental, and Vision Insurance, • 401(k) Plan with Company Matching, • Paid Time Off, • Holiday Pay, • Training & Development Program, • Monthly Productivity/Bonus Incentive Program(s), • Shift Differentials (2nd or 3rd Shift ONLY) This job description is not an exhaustive list of all duties or responsibilities associated with the Trailer Technician position. Dallas Trailer Repair Co. reserves the right to modify duties and responsibilities as necessary to meet business needs.

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group is looking for experienced Auto/ Diesel Equipment Mechanics for long-term nested maintenance at a site in the Deer Park, TX area. The successful candidate will have experience working on heavy equipment, gas/ diesel engines, and hydraulic systems as well as small engine pieces of equipment such as golf carts and tractors. TWIC Required. This position offers: • Regular 40 Hours+ per week (Overtime after 40), • Sign-on bonus of $500 after 6 months, $1500 after 12 months, and $3000 after 18 months onsite., • Overtime and call-outs as needed - overtime paid at time-and-a-half, • Health, (BCBS) Dental, (Delta) Vision, and Life insurance available, • 401k with employer match from day 1, no vesting required, • Short/ Long-term disability available Equipment Mechanic Duties and Responsibilities • Perform electrical, hydraulic, and mechanical repairs as well as preventative maintenance, • Troubleshoot issues with diesel engines, • Determine what parts and tools are necessary to make repairs, • Complete shop paperwork, • High school diploma or GED certificate, • Post-secondary certificate or degree in engineering OR training as a mechanic is a plus, • 5+ years of experience with diesel/heavy equipment repair, • TWIC Card, • Valid driver's license and a clean driving record Per diem and relocation is not available for this position; the successful candidate will be a current resident in the Houston metro area. Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST Job Posted by ApplicantPro

Job DescriptionDescription: • Responsible for working directly with the Maintenance Manager to maintain satisfactory up-time and optimum utilization of equipment., • Help create and document preventative maintenance program procedures on all capital equipment, including but not limited to, injection molding machines, granulators, dryers, water tower, chiller, etc., • Ability to develop specifications and makes recommendations on auxiliary and other equipment purchases, • Responsible for troubleshooting, maintenance and repair of all facility and production equipment, • Ability to operate mobile equipment such as skid loaders, scissor lifts, forklifts, etc., • Maintains appropriate documentation of maintenance schedules, equipment installations, structural repairs and work orders and other operating reports for facility, • Maintains maintenance budget including monitoring inventory and expenses, • Performs other related tasks and duties as assigned, • On call 24 hours for any maintenance related issues that could impact company's ability to meet customer commitment., • Responsible for maintaining calibration of injection machine controls and to insure all screws and barrels are meet minimum requirements., • Responsible for providing technical assistance on all things related to facility maintenance including electrical systems, building construction, plumbing, etc., • Drives continuous improvement across all aspects of the operation, • Responsible for maintaining a clean and orderly work area, • Maintain company grounds to insure safety and good 5S housekeeping. Requirements: Qualifications Education: • Minimum of 7 years’ experience in maintenance of industrial equipment including injection molding machines. In lieu of experience with injection molding machines would be acceptable to have experience maintaining blow molding or extrusion machines., • Must have experience with industrial mechanical repair including hydraulics repair, motors, pumps, etc., • Must be able to diagnose problems with equipment and devise best solutions for repairs on time and within budget. Knowledge/Skills and Abilities: • A positive can-do attitude, • Self-motivated, • Good interpersonal skills, both written and verbal, • Ability to make timely, fact-based decisions; shows good judgment, • Proficient in the ability to read and interpret Engineering Drawings, electrical and hydraulic schematics, • Ability to troubleshoot and repair industrial electrical control systems and hydraulic systems, • Ability to troubleshoot single or three phase electrical motors, • The understanding of logic controls is a plus, • Ability to work independently and handle projects to completion, • Ability to oversee and drive improvement projects Performance Metrics • Machine Down Time, • Preventative Maintenance Program and Documentation, • Maintenance and Repair Costs to Budget

Job Description (Please note if you are viewing this posting on an external job board, unless specifically stated in the posting, the provided hourly/salary estimates may not be accurate as they are not provided by CKS.) We are seeking a skilled Industrial Maintenance Mechanic to join our team. The ideal candidate will be responsible for troubleshooting, repairing, and maintaining production machinery and facility equipment to ensure safe, efficient, and reliable operation. This role requires strong mechanical aptitude, problem-solving ability, and experience working in a manufacturing environment. COMPETITIVE PAY BASED ON EXERIENCE AND SKILLS Shift Availability: 2nd: 3:00pm-11:00pm, Monday through Friday (most Saturday's) Key Responsibilities: • Perform troubleshooting, repair, and preventive maintenance on production equipment, mechanical systems, and facility utilities, • Diagnose issues with motors, gearboxes, pumps, conveyors, pneumatic and hydraulic systems, • Conduct electrical troubleshooting (basic to intermediate), including sensors, switches, and control wiring, • Read and interpret mechanical drawings, schematics, and manuals, • Perform equipment adjustments, changeovers, and improvements to support production goals, • Maintain accurate maintenance logs and documentation, • Ensure all work is performed safely and in accordance with company policies, • 3+ years of industrial or manufacturing maintenance experience required, • Strong mechanical troubleshooting skills; knowledge of pneumatics, hydraulics, and mechanical assemblies, • Ability to perform basic electrical troubleshooting, • Welding and fabrication experience a plus, • Experience in plastics, blow molding, injection molding, or similar manufacturing industries, • Knowledge of PLCs, VFDs, and automation systems

Job Description Please Note: We are not accepting applications or inquiries from third-party staffing agencies or vendors for this position. All candidates must apply directly through our job postings. Empower Your Future: At MetOx International, we're pioneering the next era of energy security and abundance through breakthrough superconducting technology. As we grow, we're always on the lookout for talented Maintenance Technicians who are passionate about keeping operations running safely and efficiently. This is a night shift position from 4pm-4am Monday-Friday. Key Responsibilities: • Rebuilding equipment, • Inspecting facility & equipment, • Preventive maintenance on facility and equipment, • Changing oil on equipment, • Inspecting equipment, • Monitoring equipment status (vibration, oils analysis, visual inspection, audible inspection, etc.), • Executing receiving end of lock, tag and try, • Troubleshoot, repair, complete preventive maintenance, and rebuild equipment: Air compressors; air dryers; vacuum pumps; valves; filters; instrumentation; etc., • Complete monthly checks of safety equipment., • Replacing valves, actuators, instruments, piping, tubing, and small vessels, • Maintain areas in a clean condition including picking up/taking out trash, minor facility repairs, etc., • Work flexible hours and schedule to achieve manufacturing objectives., • Receiving of goods (including gas cylinder and dewar deliveries), • Implement safe work practices and participate in proactive safety culture to ensure safety for the employee, public and environment., • Adhere to company policies inclusive of the attendance policy., • Other duties as assigned. Minimum Qualifications: • High school Diploma or GED, • 2 years of experience in manufacturing environment or mechanical/electrical support role Preferred Qualifications: • AAS degree in applied science or relevant field Knowledge, Skills, & Abilities: • Basic computer skills such as: opening, creating, and updating content in MS Word documents and Excel spreadsheets is required., • Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions., • The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required., • Quickly and efficiently completes tasks., • The ability to work in a fast-paced environment with less definition, policy, and bureaucracy., • Works indoors and outdoors in and around industrial and electrical equipment with potential exposure to temperature extremes due to weather conditions and operating equipment., • Routinely reacts to visual, aural, and other signals, including alarms and instructions, and is required to visually inspect work., • Will be required to serve on the Emergency Response Team. MetOx is proud to offer competitive benefits including: • Health, dental, and vision available on the first day of employment, • Paid time off + company-wide holidays, • 401(k) match, • And more! We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Convergentz, a division of Hunton Group in Houston, TX (), has a new and exciting opportunity for you to join our organization as a Building Automation System (BAS) Controls Programmer. Selected candidate will be responsible for installation, diagnoses, programming, troubleshooting, and commissioning of environmental-comfort systems, utilizing knowledge of air conditioning theory, hydronic theory, and modern control techniques. Come work for an industry leader that has been recognized both locally and nationally as one of the Top Places to Work! Responsibilities • Utilize a laptop computer, a variety of hand tools, following blueprints or engineering specifications, to install, diagnose, repair, and programming HVAC equipment., • Create software programs and animated front end graphics., • Identify, analyze, diagnose, and repair instruments and products at a customer's location., • Perform service repairs, modifications, adjustments, and calibration on controls system as needed or requested by customers., • Perform checkout, start up, and commissioning on projects., • Prepare for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating on-site work, as necessary., • Install and service products and equipment on assigned projects and ensuring customer satisfaction., • Maintain equipment by inspecting for signs of wear (maladjustment, miscalibration, malfunction, and drift)., • Document work by completing paperwork on each job and maintaining files., • Support HVAC Field Technicians by providing technical assistance and offering guidance., • Provide training and technical support to customers., • Niagara/Tridium controls experience required., • N4 Certification preferred., • Distech controls experience preferred., • Excellent written and oral communication skills., • Strong technical and mathematical aptitude., • Must be able to interpret sequence of operations and translate into functional programming., • Excellent customer service skills., • Proficient computer and network skills required., • Must have a valid driver's license and good driving record., • Associate's degree or equivalent from two-year college or technical school in HVAC, Computer Science, or Computer Science related field preferred. Job Posted by ApplicantPro