Trabajos shop en San Antonio, Texas - Page 2Crear alertas

Job Description Position Overview: The role oversees multiple reconditioning lines and is responsible to ensure necessary production metrics are consistently met. What you'll be doing: • Oversee multiple reconditioning lines within the Inspection & Reconditioning Center (IC), planning production for a full working shift., • Fully manage facilities to meet or exceed targets in production, cost, and quality when the General Manager is not onsite., • Quickly identify bottlenecks that affect site throughput and efficiency. Conduct root cause analysis, develop action plans, and execute with the site leadership team and associates., • Conduct weekly site performance reviews with Senior Reconditioning leadership, reporting on performance versus targets, challenges, and countermeasures., • Guide daily site manager huddles to establish the day's tone and priorities., • Aid in the execution of Continuous Improvement projects at home site and, if applicable, throughout the region/network, while implementing and training process changes., • Foster growth and development in our Reconditioning Lead and Manager populations by supporting Development Plans and providing regular competency-based feedback., • Embody Carvana values through effective leadership, teamwork, and communication on the shop floor., • Uphold Carvana operating standards and processes., • Must be open to relocation, ideally nationwide but at minimum regionally (Northeast, Southeast, Midwest, West Coast)., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Experience leading a team of over 50 associates and a track record of developing employees., • Proven ability to solve urgent operational challenges through root cause analysis., • Excellent communication skills., • 8+ years of management experience either in an automotive or lean manufacturing environment., • Valid driver's license with a clean driving record (no DUIs and no more than two moving violations in the last 3 years)., • Must be able to read, write, speak and understand English., • Must be at least 18 years of age., • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Ability to work variable schedule(s) as necessary., • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels., • Must be able to walk up to three miles each day. Other requirements To be able to do your job at Carvana, there are some basic requirements we want to share with you.

Job DescriptionDescription: Job Title: EH&S Assistant Manager Department: Corporate (Shared Services) Reports To: Corp. HR Director Status: Exempt Direct Reports: May have dotted line reports Job Type: Onsite full time Job Summary: EH&S Assistant Manager is responsible for ensuring our work sites are safe and comply with all environmental and safety regulations and policies. Responsibilities include developing and implementing environmental and safety policies and procedures, managing the review and audit process of facilities and operations to maintain compliance with ISO 14001, OSHA and related regulations. This position manages EHS reporting (internal and external), workers compensation, best practice standardization and compliance related matters. This position provides functional direction and guidance to EHS personnel the company may have at each plant. Main Duties and Responsibilities (Other duties may be assigned) Environmental · Ensure adherence to ISO 14001 standards and lead recertification audits. · Conduct regular audits to ensure compliance with laws, regulations, and standards including management and disposal of hazardous waste and materials. · Implement compliance calendar items for the program. · Identify, propose and implement improvements to the ISO 14001 program. · Manage and keep up to date all documentation and reports including training records. · Conduct regular meetings with the management team to inform status of the program and any open items. Health & Safety · Foster a culture of safety and environmental responsibility in the organization. · Develop and implement required health and safety programs. · Identify potential hazards and develop strategies to mitigate or eliminate risk. · Conduct monthly H&S audits to ensure compliance with regulations and identification of areas for improvement. Present findings/reports with corrective and preventive actions to management team. Follow up for timely completion of corrective and preventive actions and report status of open and closed actions on a weekly basis to the respective Plant Manager. · Establish an effective process for incident recording, and reporting to timely inform the management team on all safety incidents especially recordables. Keep updated records of incidents. · Timely report, manage and follow up on all workers’ compensation related incidents/claims. Coordinate with medical providers and workers compensation insurance carrier to ensure a prompt return to work of injured employees. · Conduct quarterly meetings with the workers compensation insurance carrier for status and action plan to close active claims. · Timely close all incident reports by completing an investigation for each incident and establishing corrective and preventive actions. Follow up for timely completion of corrective and preventive actions resulting from reported safety incidents and report status of open and closed actions on a weekly basis to the respective Plant Manager. · Implement required employee training including accurate record keeping. · Ensure training program of special skill sets and requirements are conducted and maintained (LOTO, Forklift, and all other OSHA required training both at hire and annually). · Implement, facilitate and maintain Safety Committees including recruitment of committee members, training, meetings, performance of audits. · Serve as a first respondent as needed. · Participate in quarterly plant-wide meetings to communicate to employees the status of EHS program and key metrics. · Remain up to date on changes in environmental and safety regulations and maintain a solid working knowledge of the regulations. · Partner with PPE supplier to ensure timely stocking of PPE and address any issues with PPE/janitorial supplies. · Liaison with Toyota Safety and Security. · Support second and third shift based on the needs of the business. Reporting and Compliance · Collect and prepare necessary information and documentation on safety and environmental incidents for accurate and timely KPI tracking, internal reporting (e.g. daily safety cross, SLT scorecard, monthly KPIs), and compliance reporting (e.g. OSHA reporting – severe injuries, fatalities, 300 Log, 300A Form). · Interface with regulatory bodies such as OSHA, EPA, etc.. and respond to complaints and inspections as needed. #zr Requirements: Education: · Bachelor's degree in occupational health and safety, industrial engineering, or closely related field preferred, or high school diploma plus 8 years of equivalent work related experience in lieu of degree. Experience: · Minimum of 8-10 years’ experience as Safety Coordinator, Specialist or Manager in multi-site companies in fast-paced manufacturing environments, automotive preferred. · Deep understanding of EH&S regulations and standards. · Experience in implementing and managing EHS programs, standards, and procedures. · Strong training and coaching skills to guide employees on safety protocols and procedures. Certificates, Licenses, Registrations: · OSHA 30-hour general industry card and OSHA #511 certificate. · OSHA #501 Trainer for General Industry, a plus. · CSP a plus Computer Skills: · Intermediate to advanced proficiency in MS Office, including Word, Excel, PowerPoint, Teams and in the use of e-mail, web browser applications. · Proficiency in using safety management software and other relevant tools, preferred Mathematical Abilities: · Intermediate-advanced math skills. Analytical or Reasoning Abilities: · Strong analytical, planning skills and critical thinking ability required with orientation for continuous improvement. · Ability to understand and follow written technical procedures/instructions. · Ability to effectively prepare business and technical documentation such as policies, procedures, reports, presentations, etc. Communication Skills: (Writing, Foreign Language, Reasoning) · Ability to read, write and speak English · Highly effective, articulate communication skills (verbal & written) with strong interpersonal effectiveness and the ability to work with all levels in the organization and across cultures. · Bilingual English-Spanish preferred. Other Skills (Technical, or Other special knowledge and abilities) · Ability to effectively organize and prioritize work. · Highly organized with strong attention to detail and ability to effectively manage a variety of projects and tasks. · Ability to take initiative, approach others in a positive and constructive manner, and work well independently to achieve results. · Passionate and committed to create a culture of EHS in the organization. Traveling: · This position may require about 5% travel to domestic and international locations. Physical Requirements: · About 60% of the time will be spent on the shop floor completing work related to the position while the remaining time will be spent doing administrative related work on a computer and working with basic office equipment (fax, printer, phone, etc.) · Must be able to lift 25 pounds individually and team lift 50 pounds Must be able to perform this job safely in accordance with standard operating procedures without endangering the health or safety of self or others. -Must wear all personal protective equipment where required. #zr

Job Description Blue Printer Estimator - North Park Lincoln Accuracy. Honesty. Attention to detail. If you have these qualities AND want to make a great living putting them to use, then our dealership has an opportunity for you. As our collision center estimator, you will work with some of the best collision center managers in the business to ensure that repairs are estimated properly and delivered as promised. Our goal is to always exceed expectations, and we need estimators who feel the same way. Prior experience as an estimator or in a customer service role is preferred. We have an extremely busy shop with plenty of opportunity for career advancement! Responsibilities • Prepare honest, accurate and complete damage estimates for customers, • Inspect damaged vehicles thoroughly using standard written procedures, • Estimate repair costs and the anticipated time needed to complete them, • Monitor repairs as they are made and track costs, labor and materials, • Ensure that all work meets quality standards, • Provide exceptional customer service and follow-up, • Demonstrated ability to work professionally and courteously with customers, • A people-focused mindset and a passion for providing great customer service, • Proficiency with multiline phone systems and computers, • Ability to work in a fast-paced work environment, • Strong organizational and time management skills, • Professional appearance and strong work ethic High school diploma or GED Customer service experience is a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to walk. The employee is occasionally required to sit and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Benefits Benefits include medical, dental, life and disability, 401(k), paid vacation, sick, holiday and a wellness program. We are an Equal Opportunity Employer. About Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Mechanic, you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. The right candidate will have a track record of mechanical repair experience, preferably in the golf kart, go kart, motorcycle, or motorsports field, and will be self-motivated and be able to work in a fast-paced environment. Is this you? Duties and Responsibilities: • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States, • Standing over 2/3 of time, • Walking over 2/3 of time, • Medical, dental and vision benefits., • Paid vacation and sick time, • 401K

Job DescriptionImmediately hiring Shop General Labor Workers for a large metal manufacturing/distribution plant on the northeast side of SA. Pay is $18/hr. 1st shift 5:30am, Mon-Fri (8-10 hr. shifts)2nd shift 1:45pm, Mon-Fri (8-10 hr. shifts) Shop General Labor Worker duties: • Assist machine operators with changeovers and setup, ensuring smooth transitions between production runs, • Prepares material and line in accordance with specifications., • Verify, weigh, bind, and tag metal, • Discharge material from the line and place it on the corresponding skid., • Ensures all products meet customer specifications., • Thread the line, verify material dimensions, and adjust speed and tension to produce a quality product, • Operate mobile production equipment and performing basic maintenance tasks, • Operate overhead crane to move material throughout shop Requirements:, • Previous manufacturing and machine operating experience., • Ability to use measuring tape., • Must be able to follow instructions and schematics., • Machine/production experience required., • Prior metals experience preferred., • Ability to work in a fast-paced environment and take direction., • Repetitive movement while operating machines, standing the entire shift, bending, stooping., • Must be able to lift up to 50 pounds.Please call/text 210-664-2680#vipstaffing#zrsat

Job Description We are seeking a Hollow Metal Shop Welder to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload

Job Description MANUFACTURING PUMP MAINTENANCE TECHNICIAN SAN ANTONIO TX 78264 Snelling Staffing is seeking a dedicated Manufacturing Pump Maintenance Technician in San Antonio, TX 78264 to join a mechanical maintenance team at an automotive manufacturing plant located on the south side of San Antonio. This role is crucial in ensuring the smooth operation of the facilities and equipment. If you have a strong background in maintenance and are ready to work in a dynamic environment, we want to hear from you! PAY/SCHEDULE/LOCATION/BENEFITS: ● Starting at $23.50-$25.00/hr DOE ● South San Antonio, TX area ● 1st Shift: 6:00 AM - 2:30 PM ● 2nd Shift: 2:00 PM - 10:30 PM ● 3rd Shift: 10:00 PM - 6:30 AM ○ (must be able to train on 1st shift 6:00 AM-2:30 PM) ● Weekly Pay via pay card or Direct Deposit ● Access to Medical, Dental, Vision & more MANUFACTURING PUMP MAINTENANCE TECHNICIAN DUTIES: ● Diagnose and repair various high-pressure water pumps and associated systems, involving mechanical and electrical troubleshooting, component replacement, preventative maintenance ● Perform routine maintenance and repairs on paint shop equipment, including spray booths, conveyors, and robotic systems ● Troubleshoot and resolve mechanical, electrical, and pneumatic issues to minimize downtime ● Monitor and maintain paint delivery systems to ensure optimal performance and quality standards ● Conduct preventive maintenance tasks and inspections to uphold safety and operational efficiency MANUFACTURING MAINTENANCE TECHNICIAN REQUIREMENTS: ● Submit to a drug screen & criminal background check ● Physically capable of standing, bending, and lifting up to 50 lbs. for extended periods ● Have reliable transportation ● Basic knowledge in electrical, hydraulic, and conveyor systems Company DescriptionAt Snelling San Antonio, we provide value by understanding the human side of business, making meaningful impact on both the people we employ and those we serve, ensuring accurate Career Job Matching. We are the leader in innovative workforce solutions. We help clients create and align their workforce strategy to achieve their business strategy, increasing business agility and personal flexibility and accelerating personal and business success.At Snelling San Antonio, we provide value by understanding the human side of business, making meaningful impact on both the people we employ and those we serve, ensuring accurate Career Job Matching. \r\nWe are the leader in innovative workforce solutions. We help clients create and align their workforce strategy to achieve their business strategy, increasing business agility and personal flexibility and accelerating personal and business success.

Job Description Job description: We are looking for a Mechanical Engineer, who is experienced in the aerospace industry. Experience with Cargo Aircraft is a plus. The ideal candidate should be proficient in SOLIDWORKS. Responsibilities • Design and detail components in support of quotations, orders, and manufacturing projects., • Solve emerging issues, develop corrective actions, and implement solutions to enhance production efficiency., • Collaborate closely with production teams to ensure design specifications and shop capabilities align., • Engage in non-mechanical design tasks, including software troubleshooting, vendor communication, and customer interaction., • Lead manufacturing and productivity improvements, focusing on both immediate and strategic solutions., • Work intensively with manufacturing teams to innovate and implement production processes for new products., • Conduct pre- and post-reviews of projects to drive continuous improvements and cost reductions. Requirements • Candidates must have at least 3-5 years of similar and recent work experience., • Proficient in SOLIDWORKS, or equivalent program, with an expectation to pass a practical test during the hiring process., • Experience with ERP systems is beneficial., • Strong background in sheetmetal and weldment design., • Familiar with various manufacturing processes and comfortable in a dynamic environment., • Capable of handling multiple projects simultaneously with strong organizational and prioritization skills., • Excellent communication skills and proficiency in Microsoft Office Suite., • Bachelor's or Associate's degree in Mechanical Engineering, Design, or a related field is preferred.

Job Description We are seeking a skilled and motivated HVAC Sheet Metal Fabricator - Fab Shop with experience in commercial construction. The ideal candidate will be responsible for fabricating, assembling, and installing sheet metal ductwork for HVAC systems in commercial buildings. Key Responsibilities: • Install, assemble, and secure sheet metal ductwork for HVAC systems in commercial construction projects., • Measure, cut, and bend sheet metal according to blueprints and specifications., • Work with a variety of duct materials, including galvanized steel, aluminum, and stainless steel., • Ensure proper sealing and insulation of duct systems to meet industry standards., • Read and interpret blueprints, schematics, and job specifications., • Operate hand and power tools, including shears, brakes, and welding equipment., • Collaborate with other trades to ensure proper system installation., • Follow safety guidelines and maintain a clean and organized work environment., • Perform quality checks to ensure all work meets local building codes and HVAC standards.Qualifications:, • High school diploma or equivalent., • Minimum of 2 years of experience in HVAC sheet metal duct installation., • Ability to read and interpret blueprints and technical drawings., • Strong understanding of HVAC ductwork installation techniques and best practices., • Experience working with various hand and power tools used in sheet metal fabrication., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check.Preferred Skills:, • Familiarity with local HVAC codes and regulations., • Experience with welding and soldering sheet metal components., • Strong problem-solving and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description Company Description OEM Logistics, LLC was founded in January 2023 by two industry veterans with a proven track record of success identifying outside the box niche solutions that address the supply chain challenges within the aerospace & defense industry. OEM delivers proactive supplier management solutions for the major Primes and Tier-1’s across the aerospace, defense, and shipbuilding sectors. By integrating our supplier specialists directly within supply chain networks, we deliver a level of oversight and engagement that surpasses conventional methods. Headquartered in Arizona, OEM is experiencing rapid growth and we’re searching for Supplier Specialists with a passion for manufacturing and aerospace to join our team. The Supplier Specialist position is a full-time position with frequent local travel requirements. Regional travel opportunities are available for those that are flexible and have interest. Pre-employment background and drug screening are required. Supplier Specialist Primary Duties and Responsibilities: • Develop a partner relationship with the assigned suppliers and work as a team to meet the customer’s requirements., • Manage the suppliers Open Order Report in conjunction with the supplier to minimize risk and identify opportunities to improve delivery where necessary, • Manage delivery performance trends and initiate root cause analysis and corrective actions, • Facilitate and drive timely and effective closure of corrective actions, • Work with problematic sub-tiers to improve communication and establish achievable production commitments., • Facilitate cross-functional department communication and drive actions to prevent unnecessary delays, • Provide frequent written communication on mission critical parts and overall delivery performance, • Local/regional travel is required, • Other duties as required Qualifications & Skills: • US citizenship required (unless position is international), • College degree preferred. May substitute additional experience in lieu of education, • Minimum of five years of manufacturing experience required (Aerospace, Defense, Ship Building, or Submarine Industry experience preferred), • Expertise in Supply Chain Management, Production Control, and Shop Floor Management, • Experience with continuous improvement, Lean Manufacturing principles, Risk Management, Six Sigma, Kaizen events, PDCA preferred, • Strong Project Management experience preferred, • Excellent interpersonal, written, and verbal communication skills, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills, excellent analytical skills and professional judgment, • Experience with Microsoft Office Programs required, • Must possess and maintain a current, valid driver’s license and must successfully complete a pre-employment motor vehicle history check All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status Powered by JazzHR LhZyC5tMQF

Job Description SUMMARY We are seeking a Mechanical Design Engineer who can translate customer specs, engineering standards, and real-world challenges into clear, accurate, buildable designs. You'll work across engineering, manufacturing, and project management teams to ensure our enclosures are not only functional but exceptional. RESPONSIBILITIES • Interpret customer specifications and internal requirements to develop 3D models and 2D fabrication drawings, • Collaborate with engineers and project managers to ensure accuracy, manufacturability, and completeness, • Own the quality of your work—proactively identify issues before they hit the shop floor, • Use SolidWorks and DraftSight (or similar software) to generate and revise technical drawings, • Build a detailed Bill of Materials (BOMs) in alignment with production and procurement needs, • Apply knowledge of structural, mechanical, or electrical principles to enclosure layout and component integration, • Maintain consistent drawing standards and adhere to internal QC processes, • Proficiency in SolidWorks, DraftSight, or similar CAD platforms, • Strong 3D visualization and interpretation skills, • Deep understanding of design for manufacturability, • Familiarity with structural and mechanical design; electrical design is a plus, • Experience supporting or working alongside manufacturing teams, • Self-motivation, a sharp eye for detail, and the ability to work under pressure without compromising quality, • Experience in emergency power systems or generator enclosures is highly desirable, • Degree in Mechanical Engineering is preferred—but equivalent experience in custom manufacturing or design is welcomed, • PE license is a bonus, not a requirement, • Mostly office-based (design and CAD work), with regular visits to the shop floor to validate designs, • Occasional travel may be required for site visits, customer collaboration, or vendor coordination, • Ability to climb ladders, walk fabrication lines, or inspect enclosures during and after build

Job Description Proman Skill Trades is currently seeking Commercial Pipefitters to join our team ! Pipefitters will assemble and secure pipes, tubes, fittings, and related equipment for cutting, threading and welding in the San Antonio area. Responsibilities: Responsible for the layout, assembly, installation and repair of plumbing systems. Installs these systems according to specifications and appropriate trade and building codes. These systems may consist of pipes, findings, piping systems, fixtures and equipment for heating, cooling, gas, steam, lubricating, sprinkling and industrial processing systems. Studies specifications, building plans and shop drawings to determine work aids required and sequence of installation. Maintains the work area in a clean orderly condition and follows prescribed safety regulations (should support implementation of 65). Maintains required personal tools and properly uses all Personal Protection Equipment (PPE) and safety equipment. Qualifications: At least 4 years of experience in Commercial Pipe Fitting Familiarity with blueprints and schematics Familiarity with pipefitting tools and procedures Must be able to handle a physical work load Must have own tools and reliable transportation Strong problem solving and critical thinking skills

Job Description Responsibilities A Body Shop Technician will repair or replace damaged body parts back to Pre-Accident Condition with factory and dealership specifications. Quality repair need to meet or exceed the original factory fit and finish. The end result should be an invisible repair. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Review each repair order, work order, and estimator’s notes to understand repairs needed prior to beginning work on the vehicle., • All repairs must be completed according to the documentation on the repair order or the supplement., • Knowledge of the manufacturer’s and technical repair process., • Ability to use frame and measuring equipment per vendor procedures., • Perform initial teardown of vehicle., • Identify parts for cut-in and edging., • Perform all repair procedures according to factory specifications and company policy. I-Car Standard., • Perform and sign-off on all quality check before sending vehicle to paint department., • Re-assemble painted vehicle and painted parts., • Perform a final quality check and review of work order prior to sending the vehicle to the detail department., • Work with apprentice or lesser skilled technicians in developing repair skills. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • Three years’ body shop experience., • ICAR Welding Certificate. This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Path Construction is seeking a qualified Assistant Project Manager to join our organization in San Antonio, TX. We are a rapidly growing commercial general contractor with offices in Arlington heights, IL; Dallas, TX; Scottsdale, AZ; Knoxville, TN; Charlotte, NC; and Tampa, FL, with project throughout the United States. Typical duties of an APM include managing day-to-day activities of subcontractors and suppliers, contract administration, procurement, estimating, pay requests, change orders, requests for information, cost control, scheduling, tracking submittals, maintaining and delivering a high level of quality. The right candidate will have 2+ years of construction management experience on large and/or small projects and varying asset classes including but not limited to, Higher Education, Retail, Multi-family, Self-storage, Hospitality, Senior Living, Healthcare, Restaurant, Transportation, Water and Waste Treatment, Convention Centers, Laboratories, Correctional, etc. Path is looking for people with great technical skills, good communication skills, and strong attention to detail. Founded in 2008, Path Construction is a general contractor providing a vast array of construction services to multiple regions throughout the country. Our expertise is very diverse and includes experience on small and large projects of many different types, including but not limited to: healthcare, hospitality, higher education, multi-family, self-storage, senior living, transportation, water and waste treatment, convention centers, laboratories, and correctional. The main philosophy and strategy for the growth of our organization is to be on the cutting edge of all aspects of the construction process. Additionally, our unmatched customer satisfaction and, most importantly, the development and quality of our people drive our success. For more about us, please visit our website at . Duties for an Assistant Project Manager include: • General Contract and Subcontract administration, • Monitor and document jobsite safety and accident prevention, • Construction Scheduling, • Material & Equipment – procurement and expediting, • Process RFI’s, • Receive, • Review, • Submit, • Log, • Shop drawing and submittal review and coordination, • Project cost review, reporting, updating and accounting, • Review of subcontractor applications for payment, • Participation in and documentation of project coordination meetings, • Supervision and coordination of subcontractors’ field installations, • Review and negotiate change proposal pricing from subcontractors, • Prepare change proposals, • Change order documentation and associated cost reporting and maintenance, • Research and suggest options on construction means, methods and equipment, • Quality control, • Project Closeout, • Implement all applicable Safety Programs and EEO/Affirmative Action Programs on the Project Requirements • A 4 year degree in Building Contruction, Engineering, or a related field, • 2+ years of building and construction management experience, • OSHA Site Safety Experience, • Up-to-date with modern technology and display excellent communication skills, • General knowledge of construction principles/practices required, • Strong work ethic and desire to work in a team environment and grow the company, • Must have a valid driver’s license and ability to travel may be required, • Working knowledge of project management process and software. (Microsoft Office and SAGE 300 CRE), • Proficient in Microsoft Office Preferred • Public work experience is a plus, • Estimating experience is a plus, • Self Perform experience is a plus, • OSHA 30 Hour Training, • Competitive Compensation, • Certification Training, • 401(k), • Health, Dental, Vision, Life, Long-Term and Short-Term Disability Insurance, • Company cellphone and computer, • Financial and Mental Health Support through a third party, • Travel and Entertainment Discount Program

Job Description Job Summary Must verify and distribute parts in a timely, accurate and efficient manner and in accordance with JD Collision Express SOP's, which allows teammates to complete repairs in a timely manner Essential Job Duties Responsible for ordering parts from preferred vendors with a constant sense of urgency, confirming orders with vendors beginning, mid and end of each day holding them accountable to times and delivery Check in, tag and distribute parts immediately upon receipt or by 9am for overnight OPS deliveries Inspect all parts for damage and quality/accuracy Verify correct parts and mirror match within 2 hours of receipt Label and distribute/exchange parts to Parts Carts/Containers and deliver to work stations while confirming arrival and accuracy with technicians Post and scan parts Return and re-order incorrect or damaged parts Track incomplete order status (outstanding orders, backorders, and credits) and follow up as necessary Complete parts “hot runs” as necessary Maintain pending credits at zero Keep work area clean and well organized Comply with all JD Collision Express safety rules, guidelines and standards Perform other related duties as assigned including, but not limited to washing cars, cleaning the shop, assisting other teammates, etc. Skill/Requirements Must be at least 18 years of age Must have a valid driver’s license and be eligible for coverage under company insurance policy (Not an excluded driver) Ability to effectively communicate with others, oral and written Ability to read and understand instructions, written estimates and work orders Multi-tasking; adapts easily to fast-paced environment Personable, friendly demeanor with customer service approach to internal and external customers Maintain a well-groomed, professional appearance Physical Requirements / Working Conditions Position is based in a normal shop environment. Physical activity such as reaching below and above shoulder level, kneeling, bending, squatting and stooping to inspect repairs, as well as lifting and carrying objects over 50 pounds is a part of daily activity.

Job Description JOB DESCRIPTION TITLE: Procurement Buyer FLSA Classification: Non-Exempt Department: Procurement Rev Date: 8.27.2025 Reports to: Director of Procurement Position Summary: The Purchasing Buyer Representative is responsible for forecasting and purchasing merchandise or commodities for Insco branches. Essential Duties and Responsibilities: · Search and evaluate good suppliers on multiple criteria such as price, quality, service support, availability, reliability, selection, etc. · Evaluate suppliers based on cost, quality, service, availability, reliability, and selection variety. · Examine catalogs, industry and company publications, trade journals, commerce publications and directories in order to find the right suppliers. · Prioritizes and manages forecasting load/purchase order creation to meet various schedules and objectives. · Ensure transactions are managed in a seamless process from order entry through invoice payment. · Utilizes practices such as quote analysis, negotiation, and partnering to ensure maximum value for expenditures. · Evaluates competitive quotations and negotiates agreements that achieve the lowest cost for materials balanced against optimum quantity, quality and on-time delivery. · Maintain awareness or current market conditions, new products, and supply sources for assigned commodities, new technologies, and methods that enhance the value of the purchasing process. · Recommend suggested changes to management and internal customers. · Confers with suppliers to determine factors that affect prices and availability and perform market analysis as needed. · Supports other departments within the company · Exhibits accuracy and thoroughness when purchasing product. · Establishing foreign and domestic suppliers as needed. · Respond promptly to branch needs and feedback to improve service. · Studying sales records and inventory levels. · Proven ability to work in an environment where the team relies on the collaboration and assistance of each member · of the team. · Assists with special projects as necessary. • Will be required to perform other duties as requested, directed, or assigned. Job Knowledge, Skills, and Abilities: • General knowledge of procurement and material inventory, • To perform this job successfully, an individual should have strong knowledge of Microsoft Suite software, specifically proficient in Word, Excel, Power Point, Outlook. Skilled in Epicor Prophet 21, and DSX forecasting, • Excellent written and oral communication skills., • Ability to work independently., • Excellent mathematical skills. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percentages, discounts, interest, commissions, proportions, percentages, and volume,, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several concrete variables in standardized situations. Education and Experience: • High school diploma or equivalent, • Bachelor’s Degree Preferred, • APICS CPIM preferred, • Knowledge of HVAC parts/products and components. Minimum of 3 years of working MRP experience., • Familiar with HVAC vendors and suppliers. Physical Demands: · Required to lift up to 35 lbs. · Must be able to sit/stand up to 8-10 hours per day · Regularly required to sit, stand, bend, reach, and move about the facility. · May be subject to sitting for long periods of time to perform job scope. Work Environment: · Location of position: Corporate Headquarters · Background checks and drug tests required · Work will generally be performed in an office environment. · May be exposed to shop elements such as noise, dust, odors, fumes, and oils. · May be required to work hours other than the regular schedule These statements are intended to describe the general nature and level of work to be performed and are not intended to be an all-inclusive list of responsibilities and duties. Company DescriptionInsco Distributing is a family-owned wholesale HVAC distributor that serves contractors in Texas and Oklahoma since 1958. Now, with over 60 years of experience in the industry, we have grown to become a leader in HVAC with over 250 employees in 37 locations. Insco Distributing makes your life easier by putting everything you need right at your fingertips. From quick product info to hassle-free account management and easy parts searches, we've got you covered. When you choose Insco, you're choosing a partner dedicated to your success. Your trust means everything to us, and we're ready to prove why we're the best choice in the industry.Insco Distributing is a family-owned wholesale HVAC distributor that serves contractors in Texas and Oklahoma since 1958. Now, with over 60 years of experience in the industry, we have grown to become a leader in HVAC with over 250 employees in 37 locations.\r\n\r\nInsco Distributing makes your life easier by putting everything you need right at your fingertips. From quick product info to hassle-free account management and easy parts searches, we've got you covered.\r\n \r\nWhen you choose Insco, you're choosing a partner dedicated to your success. Your trust means everything to us, and we're ready to prove why we're the best choice in the industry.

Job DescriptionLocation: San Antonio, TX (On-site) Company: BE&SCO ManufacturingAbout Us BE&SCO Manufacturing is a leader in innovative equipment for the food manufacturing industry, specializing in bakery equipment. Our success comes from blending practical engineering expertise with creative thinking — and our R&D team is at the heart of that innovation. We are looking for engineers who aren’t just seeking a desk job, but tinkerers, makers, and problem solvers who are excited to invent the future of our products. Essential Duties and Responsibilities Product Innovation & Technical Leadership * Lead the design, testing, and improvement of new products, processes, and technologies within R&D. * Utilize the stage-gate process to effectively communicate with leadership. * Manage assigned R&D projects from start to finish, including objectives, milestones, and resource alignment. * Collaborate with leadership and shop teams to brainstorm, prototype, and validate new product concepts. * Apply DFM/DFA principles to ensure products are efficient, cost-effective, and manufacturable. Hands-On Prototyping & Problem Solving * Work with shop personnel to build, test, and refine prototypes. * Troubleshoot and resolve design and fit issues using knowledge of welding, machining, and fabrication. * Use CAD, 3D printing, and manual tools to experiment and iterate. Project Ownership & Cross-Functional Coordination * Act as primary point of contact for project deliverables. * Partner with Manufacturing, Sales, and Marketing to align designs with customer needs and market trends. * Support Production during first-run builds. * Communicate project updates, risks, and results to leadership. Process Development & Documentation * Create and maintain CAD drawings, BOMs, ECOs/ECNs, test reports, and SOPs. * Identify process improvements to accelerate product development. * Ensure compliance with engineering documentation standards. Existing Product Support & Continuous Improvement * Review current products for cost, performance, and manufacturability improvements. * Troubleshoot product failures, perform root-cause analysis, and recommend corrective actions. * Collaborate with Quality and Service teams to meet customer and market demands. Qualifications Required: * Bachelor’s Degree in Mechanical, Manufacturing, or related Engineering field. * 5+ years of R&D, product design, or project leadership in an industrial equipment/machinery environment. * Proficiency in 3D CAD software (Autodesk Inventor preferred). * Strong knowledge of metal fabrication and GD&T standards. * Hands-on experience with fabrication tools and equipment. * Proven ability to manage project timelines, budgets, and deliverables. Preferred: * DFM/DFA and shop floor prototyping experience. * Basic electrical knowledge (circuits, wiring, motor controls). * Familiarity with PLC programming, HMI interfaces, and certification processes (NSF, UL). Competencies * Creative Problem Solving – Develops innovative, practical solutions. * Leadership – Drives project success through coordination and accountability. * Hands-On Mindset – Comfortable working directly with shop personnel. * Collaboration – Works effectively across teams and with external vendors. * Attention to Detail – Produces accurate, production-ready documentation. * Adaptability – Shifts seamlessly between design, prototyping, and coordination. Physical Requirements * Ability to lift and move parts and tools up to 50 lbs. * Comfortable in office, shop, and production environments. * Regular exposure to fabrication tools, noise, and machinery. * Occasional travel to suppliers, customers, or trade shows. Benefits * 401(k) * 401(k) matching * Dental insurance * Health insurance * Health savings account * Life insurance * Paid time off * Vision insurance How to Apply: If you’re a hands-on engineer ready to take ownership of innovative projects, apply today and join our team at BE&SCO Manufacturing.

Job Description Toyoda Gosei Texas is looking for a Paint Maintenance Supervisor for our San Antonio, Texas plant! Position Title: Maintenance Supervisor Department: Maintenance Location: Toyoda Gosei Texas Reports To: Maintenance Manager Job Summary The Maintenance Supervisor is responsible for overseeing and coordinating the daily activities of the maintenance team across both shifts. This role ensures timely completion of preventive maintenance (PM), repairs, and continuous improvement (Kaizen) initiatives. The supervisor will drive safety, equipment reliability, and process efficiency while maintaining strong communication with internal customers and other departments. This position plays a key role in sustaining plant operations and supporting production goals through proactive leadership and technical oversight. Key Responsibilities * Plan, assign, and confirm daily maintenance activities for all shifts. * Report daily equipment downtime, Kaizen progress, and problem follow-up sheet status during management meetings. * Conduct audits of PM completion, including weekend activities, and provide daily status updates. * Ensure proper execution of repairs and preventive maintenance to minimize downtime and extend equipment life. * Support a safe working environment by enforcing safety procedures and leading safety-related initiatives. * Mentor and train maintenance team leaders and members to meet targets in Safety, Quality, Cost, and Machine Efficiency. * Oversee the use and condition of tools and equipment; ensure proper 5S practices are followed consistently. * Coordinate and execute internal audits and Kaizen projects in support of TGTX's management systems. * Assist with development and tracking of departmental expense and capital budgets. * Supervise special projects and support other departmental priorities as assigned by management. Required Qualifications * Minimum 5 years of supervisory experience in a maintenance role within a manufacturing environment. * Minimum 3 years of maintenance shop management experience. * Strong working knowledge of preventive maintenance, troubleshooting, and machine repairs (including overhauls). * Proficient in reading blueprints, electrical schematics, and using PLC systems for diagnostics. * Ability to generate and present reports using Microsoft Office (Excel, Word, PowerPoint). * High School Diploma or GED required. * Must be available to work overtime, weekends, and nights as required by management. Physical Requirements * Ability to lift up to 50 lbs. * Must be able to bend, squat, kneel, and climb ladders or elevated platforms. * Able to stand and walk for extended periods in a production environment. * Comfortable using scissor lifts and boom lifts as required. Working Conditions * Frequent work on the manufacturing floor and in the maintenance shop. * May operate and maintain a wide range of production equipment (e.g., robots, conveyors, dryers, ovens). * Occasional use of overhead cranes and handling of chemical solutions for water treatment. * Exposure to various weather conditions when working with outdoor equipment. * Use of PPE is mandatory (e.g., safety shoes, hard hats, safety glasses, gloves). Toyoda Gosei is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Job Description Job Summary: The Business Analyst – Technology Modernization drives the execution of the ERP project’s workstream focused on growth and operational excellence. The individual collaborates with leadership and cross-functional teams to keep the workstream on track, within budget, and delivering measurable value. Responsibilities include identifying and influencing business process improvements, facilitating change management, and fostering strong stakeholder relationships. They gather and analyze data, create process documentation, and communicate product strategies effectively to diverse audiences. Additionally, the role involves advocating for standard ERP functionality and ensuring successful adoption through training and support. The ideal candidate will possess exceptional collaboration and communication skills, along with functional business knowledge and hands-on experience in the organization. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values., • Collaborate with key internal/external resources., • Participate in ongoing self-development., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Supports the workstream’s alignment with the project’s broader business goals. Collaborate with value stream leadership to support the vision, objectives, and scope of the project to support growth and operational excellence., • Helps ensure the workstream stays on track, within budget, and delivers value to the organization. Reports progress, manages resources effectively, and resolves any issues that arise in collaboration with other project resources., • Supports collaboration with other value streams and departments such as Finance, Operations, HR, Equipment, Service, Data, and IT to ensure the workstream addresses the diverse needs of the business., • Identifies opportunities for business process improvements by evaluating workflows and operational efficiencies. Proposes initiatives to the workstream lead that enhances decision-making, eliminates waste, and creates operational efficiencies., • Supports change-management efforts to ensure the successful adoption of new processes and systems across the workstream. Executes strategies to engage employees, address resistance, and drive successful transitions., • Builds and maintains strong relationships with key stakeholders across the workstream. Provides regular updates on workstream progress, manages expectations, and ensures that workstream leadership and business units are informed and engaged throughout the project., • Conducts discovery sessions, gathers requirements, creates process maps, performs analysis, identifies root causes to issues, QA tests, validates data, and creates functional documentation in partnership with their value stream lead., • Works with Business Leads and Subject Matter Experts to understand business strategy and vision and then writes, refines, and proposes prioritization of features to support effective and compliant solutions while balancing investment and business value., • Supports the success metrics for the workstream and demonstrates user engagement, behavior change, and value of the workstream to clients and internal partners, • Aligns with Business Lead to ensure external partners and vendors meet the workstream’s needs. Escalates promptly if timeline and milestones are not met., • Participates in training plans, content creation, and delivery to maximize employee engagement and system utilization., • Documents unknown requirements and raise them to Business Leads to coordinate between stakeholder groups to address them., • Works with the Business Lead to perform problem solving and prototype new procedures for the purpose of enhancing ERP business processes, operations, and information process flow., • Advocates for leveraging "Out of the Box" functionality rather than custom solutions., • Takes ownership to ensure new ERP solutions are delivered successfully., • Always works safely and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Excellent communication skills with the ability to present complex concepts into simplified solutions in a straightforward and understandable manner to multiple stakeholders, • Ability to support and evangelize product features and strategy from the Business Leads to both a technical and non-technical audience with ease., • Ability to work effectively with internal and external stakeholders in a team environment and across all organizational levels, where flexibility, collaboration, and adaptability are required, • Experience in managing multiple priorities and delivering results in fast-paced environments., • Strong problem-solving skills and the ability to navigate challenges effectively., • Ability to focus on business value results, rather than solutions. Results and value oriented, • Ability to liaise between IT and business stakeholders to ensure collaboration and coordination. Highly organized. High energy, stamina, and enthusiasm., • Demonstrates functional knowledge and hands-on experience in day-to-day operations., • Ability to identify high value activities that will bring ROI or differentiate our business from that of our competitors, • Consistently demonstrates high emotional intelligence, resiliency and the ability to work well under pressure; must be agile and comfortable with change, • Ability to thrive in a fast paced, rapid iteration environment while balancing multiple priorities, • Effective at influencing and convincing others into action yet able to also be a collaborative team member., • Ability to stay focused in a fast-paced, high-energy, challenging environment where there are multiple competing priorities daily., • Detail-oriented individual with the ability to rapidly learn and take advantage of new concepts, business models, and technologies. Finance • Power Systems operations related to Project Management including project procurement, general project management, and milestone tracking., • Service operations, including Machine and PSD Shop and Field execution., • Bachelor’s degree in Business Administration, Management, Information Technology or a related field., • Minimum of 3 years of experience in process improvement, business operations, and/or project management., • Minimum of 3 years of experience of functional workstream experience strongly preferred., • Up to 30% and overnight travel may be expected., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • Works primarily in a professional office environment., • This role constantly uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Business Analyst – Technology Modernization drives the execution of the ERP project’s workstream focused on growth and operational excellence. The individual collaborates with leadership and cross-functional teams to keep the workstream on track, within budget, and delivering measurable value. Responsibilities include identifying and influencing business process improvements, facilitating change management, and fostering strong stakeholder relationships. They gather and analyze data, create process documentation, and communicate product strategies effectively to diverse audiences. Additionally, the role involves advocating for standard ERP functionality and ensuring successful adoption through training and support. The ideal candidate will possess exceptional collaboration and communication skills, along with functional business knowledge and hands-on experience in the organization. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values., • Collaborate with key internal/external resources., • Participate in ongoing self-development., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Supports the workstream’s alignment with the project’s broader business goals. Collaborate with value stream leadership to support the vision, objectives, and scope of the project to support growth and operational excellence., • Helps ensure the workstream stays on track, within budget, and delivers value to the organization. Reports progress, manages resources effectively, and resolves any issues that arise in collaboration with other project resources., • Supports collaboration with other value streams and departments such as Finance, Operations, HR, Equipment, Service, Data, and IT to ensure the workstream addresses the diverse needs of the business., • Identifies opportunities for business process improvements by evaluating workflows and operational efficiencies. Proposes initiatives to the workstream lead that enhances decision-making, eliminates waste, and creates operational efficiencies., • Supports change-management efforts to ensure the successful adoption of new processes and systems across the workstream. Executes strategies to engage employees, address resistance, and drive successful transitions., • Builds and maintains strong relationships with key stakeholders across the workstream. Provides regular updates on workstream progress, manages expectations, and ensures that workstream leadership and business units are informed and engaged throughout the project., • Conducts discovery sessions, gathers requirements, creates process maps, performs analysis, identifies root causes to issues, QA tests, validates data, and creates functional documentation in partnership with their value stream lead., • Works with Business Leads and Subject Matter Experts to understand business strategy and vision and then writes, refines, and proposes prioritization of features to support effective and compliant solutions while balancing investment and business value., • Supports the success metrics for the workstream and demonstrates user engagement, behavior change, and value of the workstream to clients and internal partners, • Aligns with Business Lead to ensure external partners and vendors meet the workstream’s needs. Escalates promptly if timeline and milestones are not met., • Participates in training plans, content creation, and delivery to maximize employee engagement and system utilization., • Documents unknown requirements and raise them to Business Leads to coordinate between stakeholder groups to address them., • Works with the Business Lead to perform problem solving and prototype new procedures for the purpose of enhancing ERP business processes, operations, and information process flow., • Advocates for leveraging "Out of the Box" functionality rather than custom solutions., • Takes ownership to ensure new ERP solutions are delivered successfully., • Always works safely and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Excellent communication skills with the ability to present complex concepts into simplified solutions in a straightforward and understandable manner to multiple stakeholders, • Ability to support and evangelize product features and strategy from the Business Leads to both a technical and non-technical audience with ease., • Ability to work effectively with internal and external stakeholders in a team environment and across all organizational levels, where flexibility, collaboration, and adaptability are required, • Experience in managing multiple priorities and delivering results in fast-paced environments., • Strong problem-solving skills and the ability to navigate challenges effectively., • Ability to focus on business value results, rather than solutions. Results and value oriented, • Ability to liaise between IT and business stakeholders to ensure collaboration and coordination. Highly organized. High energy, stamina, and enthusiasm., • Demonstrates functional knowledge and hands-on experience in day-to-day operations., • Ability to identify high value activities that will bring ROI or differentiate our business from that of our competitors, • Consistently demonstrates high emotional intelligence, resiliency and the ability to work well under pressure; must be agile and comfortable with change, • Ability to thrive in a fast paced, rapid iteration environment while balancing multiple priorities, • Effective at influencing and convincing others into action yet able to also be a collaborative team member., • Ability to stay focused in a fast-paced, high-energy, challenging environment where there are multiple competing priorities daily., • Detail-oriented individual with the ability to rapidly learn and take advantage of new concepts, business models, and technologies. Finance • Power Systems operations related to Project Management including project procurement, general project management, and milestone tracking., • Service operations, including Machine and PSD Shop and Field execution., • Bachelor’s degree in Business Administration, Management, Information Technology or a related field., • Minimum of 3 years of experience in process improvement, business operations, and/or project management., • Minimum of 3 years of experience of functional workstream experience strongly preferred., • Up to 30% and overnight travel may be expected., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • Works primarily in a professional office environment., • This role constantly uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Business Lead – Technology Modernization serves as the voice of the business and drives the successful implementation and ongoing improvement of our organization’s ERP system for a given functional value stream. This role will focus on aligning the ERP initiative with the value stream’s strategic goals, driving business transformation, and ensuring smooth collaboration with other value streams and the Principal Business Lead. The ideal candidate will have exceptional leadership, communication, and business knowledge, and be a trusted partner in this high-impact program. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values., • Collaborate with key internal/external resources., • Participate in ongoing self-development., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Hires, develops, evaluates, and influences effective and consistent productivity and teamwork to ensure the delivery of Legendary Customer Service (LCS)., • Leads the ERP project value stream by aligning it with the implementation’s broader business goals. Collaborates with project leadership to support the vision, objectives, and scope of the project to support growth and operational excellence., • Oversees the value stream and related workstreams within the ERP Project, ensuring that it stays on track, within budget, and delivers value to the organization. Monitor progress, manage resources effectively, and resolve any issues that arise in collaboration with other project resources., • Ensures the maximization of investment and capabilities of the purchased or proprietary software products supporting his/her value stream., • Fosters collaboration with departments such as Parts, Service, Equipment/Asset Operations, HR, Data, and IT to ensure the value stream addresses the diverse needs of the business., • Identifies opportunities for business process improvements by evaluating workflows and operational efficiencies. Promotes initiatives that enhance decision-making, eliminates waste, and creates operational efficiencies., • Supports change-management efforts to ensure the successful adoption of new processes and systems across the value stream. Executes strategies to engage employees, address resistance, and drive successful transitions., • Conducts discovery sessions, gathers requirements, creates process maps, performs analysis, identifies root causes to issues, QA tests, validates data, and creates functional documentation. Supervises Business Analysts when they execute these activities., • Advocates for leveraging "Out of the Box" functionality rather than custom solutions., • Builds and maintains strong relationships with key stakeholders across the business. Provides regular updates on value stream progress, manages expectations, and ensures that project leadership and business units are fully informed and engaged throughout the project., • Ability to communicate, pitch, and evangelize product features, and product strategy to both a technical and non-technical audience with ease., • Collaborates with business stakeholders and Subject Matter Experts to grasp the business strategy and vision, then crafts, refines, approves, and prioritizes features to deliver effective, compliant solutions that balance investment costs with business value., • Defines the success metrics for the value stream and demonstrates user engagement, behavior change, and value to clients and internal partners., • Aligns with Project Manager and Principal Business Lead to ensure external partners and vendors provide services to align with the value stream’s needs. Escalates promptly if timeline and milestones are not met., • Ensures that employees are properly trained and equipped to leverage new systems and processes. Participates in training program creation to maximize employee engagement and system utilization., • Evaluates information to form metrics for customer/business partner software product usage, customer behavior, or other business metrics, and solicits and embraces feedback from others., • Identifies unarticulated ERP business needs and coordinates between stakeholder groups to address them., • Performs problem solving and prototype new procedures for the purpose of enhancing ERP business processes, operations, and information process flow., • Takes ownership to ensure new ERP solutions are delivered successfully., • Always works safely and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Exceptional leadership and people management skills, with the ability to motivate and guide teams., • Excellent communication skills with the ability to present complex concepts into simplified solutions in a straightforward and understandable manner to multiple stakeholders, • Ability to work effectively with internal and external stakeholders in a team environment and across all organizational levels, where flexibility, collaboration, and adaptability are required, • Consistently demonstrates high emotional intelligence, resiliency and the ability to work well under pressure; must be agile and comfortable with change, • Experience in managing multiple priorities and delivering results in fast-paced environments., • Strong problem-solving skills and the ability to navigate challenges effectively., • Ability to focus on business value results, rather than solutions. Results and value oriented, • Ability to liaise between IT and business stakeholders to ensure collaboration and coordination. Highly organized. High energy, stamina, and enthusiasm., • Demonstrates strong working knowledge of the value stream with deep expertise. Possesses foundational understanding across related functions., • Ability to execute in a fast paced, rapid iteration environment while balancing multiple priorities., • Ability to make trade-off decisions between possible and desirable, which requires a good sense of what is technically feasible., • Ability to identify high value activities that will bring ROI or differentiate our business from that of our competitors., • Effective at influencing and convincing others into action yet able to also be a collaborative team member., • Ability to stay focused and thrive in a fast-paced, high-energy, challenging environment where there are multiple competing priorities daily., • Detail-oriented individual with the ability to rapidly learn and take advantage of new concepts, business models, and technologies., • Be comfortable working in a matrix environment and foster motivation within the project team to meet tight deadlines. Ability to inspire individuals and teams to achieve success. Finance • Finance operations, including General Accounting, Accounts Payable, Accounts Receivable, Credit & Collections, Financial marketing, Sales Support/Machine Invoicing., • Demonstrates strong working knowledge of the Finance value stream with deep expertise in General Accounting and Financial Reporting., • Service operations, including Machine and PSD Shop and Field execution., • Bachelor’s degree in Business Administration, Management, Accounting, Information Technology or a related field., • Minimum of 7 years of experience in process improvement, business operations, and/or project management., • Minimum of 7 years of value stream experience strongly preferred., • Proven experience as a highly collaborative liaison between multiple departments., • Up to 30% and overnight travel may be expected., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • Works primarily in a professional office environment., • This role constantly uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Job Summary: The Business Analyst – Technology Modernization drives the execution of the ERP project’s workstream focused on growth and operational excellence. The individual collaborates with leadership and cross-functional teams to keep the workstream on track, within budget, and delivering measurable value. Responsibilities include identifying and influencing business process improvements, facilitating change management, and fostering strong stakeholder relationships. They gather and analyze data, create process documentation, and communicate product strategies effectively to diverse audiences. Additionally, the role involves advocating for standard ERP functionality and ensuring successful adoption through training and support. The ideal candidate will possess exceptional collaboration and communication skills, along with functional business knowledge and hands-on experience in the organization. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values., • Collaborate with key internal/external resources., • Participate in ongoing self-development., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Supports the workstream’s alignment with the project’s broader business goals. Collaborate with value stream leadership to support the vision, objectives, and scope of the project to support growth and operational excellence., • Helps ensure the workstream stays on track, within budget, and delivers value to the organization. Reports progress, manages resources effectively, and resolves any issues that arise in collaboration with other project resources., • Supports collaboration with other value streams and departments such as Finance, Operations, HR, Equipment, Service, Data, and IT to ensure the workstream addresses the diverse needs of the business., • Identifies opportunities for business process improvements by evaluating workflows and operational efficiencies. Proposes initiatives to the workstream lead that enhances decision-making, eliminates waste, and creates operational efficiencies., • Supports change-management efforts to ensure the successful adoption of new processes and systems across the workstream. Executes strategies to engage employees, address resistance, and drive successful transitions., • Builds and maintains strong relationships with key stakeholders across the workstream. Provides regular updates on workstream progress, manages expectations, and ensures that workstream leadership and business units are informed and engaged throughout the project., • Conducts discovery sessions, gathers requirements, creates process maps, performs analysis, identifies root causes to issues, QA tests, validates data, and creates functional documentation in partnership with their value stream lead., • Works with Business Leads and Subject Matter Experts to understand business strategy and vision and then writes, refines, and proposes prioritization of features to support effective and compliant solutions while balancing investment and business value., • Supports the success metrics for the workstream and demonstrates user engagement, behavior change, and value of the workstream to clients and internal partners, • Aligns with Business Lead to ensure external partners and vendors meet the workstream’s needs. Escalates promptly if timeline and milestones are not met., • Participates in training plans, content creation, and delivery to maximize employee engagement and system utilization., • Documents unknown requirements and raise them to Business Leads to coordinate between stakeholder groups to address them., • Works with the Business Lead to perform problem solving and prototype new procedures for the purpose of enhancing ERP business processes, operations, and information process flow., • Advocates for leveraging "Out of the Box" functionality rather than custom solutions., • Takes ownership to ensure new ERP solutions are delivered successfully., • Always works safely and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Excellent communication skills with the ability to present complex concepts into simplified solutions in a straightforward and understandable manner to multiple stakeholders, • Ability to support and evangelize product features and strategy from the Business Leads to both a technical and non-technical audience with ease., • Ability to work effectively with internal and external stakeholders in a team environment and across all organizational levels, where flexibility, collaboration, and adaptability are required, • Experience in managing multiple priorities and delivering results in fast-paced environments., • Strong problem-solving skills and the ability to navigate challenges effectively., • Ability to focus on business value results, rather than solutions. Results and value oriented, • Ability to liaise between IT and business stakeholders to ensure collaboration and coordination. Highly organized. High energy, stamina, and enthusiasm., • Demonstrates functional knowledge and hands-on experience in day-to-day operations., • Ability to identify high value activities that will bring ROI or differentiate our business from that of our competitors, • Consistently demonstrates high emotional intelligence, resiliency and the ability to work well under pressure; must be agile and comfortable with change, • Ability to thrive in a fast paced, rapid iteration environment while balancing multiple priorities, • Effective at influencing and convincing others into action yet able to also be a collaborative team member., • Ability to stay focused in a fast-paced, high-energy, challenging environment where there are multiple competing priorities daily., • Detail-oriented individual with the ability to rapidly learn and take advantage of new concepts, business models, and technologies. Finance • Power Systems operations related to Project Management including project procurement, general project management, and milestone tracking., • Service operations, including Machine and PSD Shop and Field execution., • Bachelor’s degree in Business Administration, Management, Information Technology or a related field., • Minimum of 3 years of experience in process improvement, business operations, and/or project management., • Minimum of 3 years of experience of functional workstream experience strongly preferred., • Up to 30% and overnight travel may be expected., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • Works primarily in a professional office environment., • This role constantly uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Lead the Charge as a Technical Service Director! Have you envisioned yourself guiding the pivotal operations of a service center? At Transwest Mobile, your role as a Technical Service Director at our San Antonio/Converse location will be key. You'll manage all aspects of service operations, optimize technician efforts, and enhance customer satisfaction in a fast-paced environment. Your Role: • Steer daily department processes, focusing on workflow and operational productivity., • Lead and empower technicians, fostering a culture of high performance., • Ensure timely processing of repair orders and accurate data entry., • Resolve customer concerns with efficiency, ensuring transparent communication., • Work closely with parts, sales, and ops for an integrated service experience., • Enforce adherence to safety measures and regulatory standards., • Periodically assess service metrics, driving improvements where necessary., • Support staffing efforts through recruitment and training of service personnel., • Extensive experience in service management, particularly in diesel or mechanical sectors., • Proficient leadership and communication strengths., • High competency in organizational and problem-solving tasks., • Familiarity with service management systems such as Fullbay is ideal., • Technical expertise in diesel, mechanical, or automotive domains., • Computer system knowledge., • Experience in orchestrating shop schedules and technician activities., • Understanding of DOT and OSHA regulations., • Benefits of Joining:, • High-Impact Role: Engage in complex repairs and keep essential fleets operational., • Vibrant Team Environment: Thrive in a culture that values innovation and teamwork., • Comprehensive Benefits:- Health and Dental Insurance- 401(k) savings plan, • Life and Disability Insurance What You Bring to the Table: • Outstanding Customer Service Abilities, • Effective Project Management Skills, • Experience in Leadership Roles, • Advanced Automotive Repair Skills, • Experience in Service Advisory, • Competence in Engine Repair and Maintenance, • Expertise in Scheduling, • Familiarity with Computer Systems

Job DescriptionDescription: Vortex Industries, America’s highest quality and most customer-centric commercial and industrial door repair company, is seeking a dedicated and detail-oriented Warehouse Associate to join our team. As a Warehouse Associate, you will play a vital role in ensuring the efficient operation of our warehouse, including tasks such as receiving, storing, loading/unloading trucks, managing inventory, conducting material pick-ups, monitoring inventory, and performing general shop maintenance, as well as maintaining a clean and organized workspace. Your contribution will directly impact our ability to meet customer demands and deliver exceptional service. Responsibilities: • Unloading trucks and checking in material., • Material pickup and drop-offs., • Sort and place materials on racks, shelves or in bins according to organizational standards., • Maintain and manage inventory levels of product and equipment., • Operate machinery like forklifts., • Receive and process materials., • Maintains safe and clean work environment by keeping shelves, pallet area, and workstations neat; Sweep, dust and mop. Organize warehouse and work area for orderliness at all times., • Support any Safety programs and be a safety advocate at the Service Center., • Support management with any safety training at the Service Center., • Complete safety walks and provide feedback to the safety team., • Competitive salary based on experience, • Industry-Best Training., • Strong Safety Culture., • Positive Work Environment., • Recognitions and Rewards., • Comprehensive health benefits, 401K match, 8 company paid holidays, and PTO., • Full-time shifts are available between Vortex business hours of 7:00 AM - 5:30 PM, Monday through Friday with potential overtime Requirements:, • High School Diploma or General Education Degree (GED), • Previous experience in a warehouse role, • Strong knowledge of hand and power tools is a plus., • Proficiency in using warehouse equipment, such as forklifts., • A good driving record with valid state driver's license., • Ability to lift and carry objects 20 pounds, move objects between 20-50 pounds and perform physical tasks throughout the day., • Frequently required to stand, walk, stoop, kneel, or crouch., • Occasionally required to sit and climb ladders., • Basic computer skills for Microsoft office suite., • Willingness to follow safety guidelines and procedures., • Effective communication skills and the ability to work well within a team., • Collaborative with a continuous improvement outlook., • Strong attention to detail and accuracy in inventory management., • Productive in fast paced environments., • Reliable and dependable., • Time management skills to meet deadlines and prioritize tasks.

Job DescriptionDescription: Summary We are looking for a Hauling/Plant Manager to join our team. As a manager, you will ensure the highest standard of environmental safety and motor carrier operations conducted within, as well as understanding federal, state, local and tribal motor carrier regulations as operational excellence by effectively managing the day-to-day operations of the recycling facility and managing the costs efficiently within the site. This position requires detail-oriented person able to maintain focus in a high-tempo. fast-paced environment. The manager must maintain the cleanliness of the facility and perform other job-related duties as assigned. Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Ensures smooth operation of site, including but not limited to production, sorting, loading, unloading, inventory and labor. Along with customer service requests, scheduling, routing, etc., • Ability to create and update excel spreadsheets., • Address Miscellaneous tasks as requested or designated by other leaders., • Minimizes handling and operational costs., • Manage all office staff to ensure balance of duties, completion of tasks and related items., • Acts as a liaison where necessary, for community relationships., • Complies with OSHA and EPA regulations and ensures adherence to safe work practices to encourage safe and efficient operations., • Assists in creating a positive team-oriented environment through employee development and motivation., • Ensures the cleanliness and maintenance of the equipment and fleet through inspections and preventative maintenance programs with supervisors, employees, and maintenance-shop., • Oversee personnel needs of the site include time and attendance, selecting, coaching, and training employees and evaluating employees' performance. Provides input into termination, compensation, and promotion decisions to General Manager., • Conducts and/or attends and contributes to periodic safety meetings., • Assist with production as needed. Ability and skills in use of forklift skid steer, bucket front end loader and yard truck a plus., • Knowledge of, or willing to learn baler and conveyor systems., • Monitor the operational status of trucks., • Review and analyze route performance after completing routes., • Proactively troubleshoot and resolve potential delivery and pick-up problems., • Prevent service disruptions by addressing issues before they escalate, • Coordinate driver movements in the field based on received calls and customer service needs., • Optimize efficiency throughout the day by aligning driver schedules with service requirements., • Initiate outbound calls to customers while drivers are on site to resolve pick-up and other issues., • Handle incoming calls and emails from field personnel , customers, and sales departments., • Manage requests for pick-up or delivery, ensuring timely service response., • Assign routes to drivers daily and for the upcoming day., • Dispatch and field incoming calls and emails from customers and sales departments; manage requests for pick-up or delivery while ensuring adequate service response., • Dispatch coordinates driver movement in the field with customer service requests with the goal of optimizing service efficiency throughout the day., • Initiate outbound calls to customers while drivers are on-site/location, resolve pick-up and other issues., • Dispatch troubleshoot and resolve potential delivery and pick-up problems before they result in service issues. Relay any service issues to management., • Dispatch records and documents information from drivers and distribute to the appropriate departments., • All dispatchers must be able to effectively communicate and transition the dispatch responsibilities to the next dispatch shift., • The dispatch position has 3-7 direct driver reports, the team is responsible for multiple reports/information including, but not limited to: Route Audit Reporting, Daily Load Counts, Daily Truck Status, Customer Call Information, Weekly Collections information, ETC. Supervisory Responsibilities The highest level of supervisory skills required in this job are the tasks associated with leading and coaching employees. This includes: • Direct/Indirect supervision of full-time employees including Leads, Drivers, Equipment Operators, The Requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience • Education: Bachelor's Degree (accredited) in Business Administration, or similar area of study or in lieu of degree. 3-5 years minimum experience in the administrative field directly supporting executive level (Preferred), • Experience: 7 years of previous work experience (in addition to education requirement) with at least 4 years being in a leadership role. (Preferred), • 3-5 years in Operations setting supervising others. (Preferred), • Excellent management and leadership skills., • Excellent organizational skills., • Solid communication, problem solving and written communication skills., • Proven project management skills, including strong interpersonal, stakeholder management and collaboration skills to support working within cross-functional teams., • Excellent Microsoft Office Knowledge, • General knowledge of how to operate office equipment, trucks and other equipment used as needed., • General knowledge of how to organize various office systems through adjusting, connecting, lifting, pulling, pushing, bending or folding for the purpose of proper records development and/or management., • General knowledge of how to use a computer and related devices, such as keyboard and mouse or other related equipment, throughout the workday while seated at a desk or workstation. Normal setting for this job is: Combination of office setting (20%) and operations floor (80%) Benefit: Each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Vol Life Insurance and STD. As well as a viable 401K Savings Plan with Company match and company sponsored Life and ADD Insurance. Our employees also receive Paid Vacation, Holidays, and Personal Days.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,500 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace JOB SUMMARY This position utilizes our companies Core Values to sell all Bruckner Truck Sales products using technical, organizational, and customer knowledge skills to influence customers and assist them in applying our products/services to their needs resulting in revenue generation for the company and excellent service for our customers. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Sell heavy-duty trucks/trailers and related components spec’s., • Call on prospective customers and assigned accounts within assigned territory, • Maintains contacts with customers in relation to their requirements; keep current on market and customer trends and document all activity in the companies CRM system., • Identifies and profiles prospective customers develop and apply strategy necessary to obtain orders, close potential orders., • Reports on competitive activity, • Keeps informed on new products and other general information of interest to customers that will assist in sales efforts, • Coordinates efforts with outside parts, service, and new and used heavy duty truck sales personnel to achieve full market penetration. Marginal Job Tasks: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily., • The requirements listed below are representative of the knowledge, skill, and/or ability required., • Medium & heavy truck Sales experience preferred., • Experience in the heavy-duty truck industry., • Familiar with the commercial community., • Strong customer service & sales skills., • Commercial driver’s license preferred., • Bi-lingual POSITION REQUIREMENTS Education & Experience: • A minimum high school diploma with appropriate experience is required., • Bachelors degree is preferred., • Must have a minimum 2 years retail sales experience., • Adequate skill to prepare sales quotes, sales assistance, and analyze truck market data., • This position requires that the employee plan and prioritize their work load. Want to know more about our family-owned company,Proud that our 1500+ employees view us as the employer of choice! YouTube - Sales Department Video YouTube - Come Join The Family -VideoYouTube - Since 1932 -Video Do not forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description DESCRIPTION The SSD Technician is responsible for the installation, adjustment and maintenance of all types of detention related equipment. RESPONSIBILITIES • Install and maintain equipment including, but not limited to, cylindrical, mortise, and rim locks, motor and manually driven detention equipment, detention locks, slider service and maintenance, • Install and maintain frames, doors, hardware, locks, sliders, furniture and door closers, • Install wire mesh, security ceilings and wall panels, • Install glazing and caulking, • Plan, install, service and test mechanical and electronic locking systems, • Make emergency repairs to detention and security locking systems, • Layout detention equipment for proper locations from construction documents and shop drawings, • Handle and distribute construction materials including doors, frames, glass, hardware, steel furniture and steel assemblies, • Troubleshooting hardware and Mechanical problems associated with Detention, • Be available for on call assignments, • All other related duties as assigned or required by Service Manager and/or Coordinator, • Open, repair and change the combination of all types of locking devices and makes keys for same, • Repair and maintain all types of doors, door closers, exit devices, panic hardware and related hardware, • Operate manual key coding/cutting machine, • Log keys that are issued and returned, • Assist with building maintenance tasks, such as plumbing, electrical or other essential building functions, • Lift up to 50lbs, • Communicate regularly and effectively as appropriate, • Maintain the standards, culture and values of CML Security, • High school diploma or GED required, • 3 Years of related experience preferred, • Welding experience preferred, • Alarm tech- intrusion systems preferred, • CCTV experience preferred, • Door access control preferred, • Data cable installations preferred, • Electronics experience preferred Pay: $25-$50 an hour Expected fill date: Ongoing hiring into 2026 Employment may be contingent upon successful completion of a background check and drug screen Company DescriptionOur team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project. Total Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership. CML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.Our team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project.\r\n\r\nTotal Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership.\r\n\r\nCML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.

Job Description Used Vehicle / Service Technician - North Park Subaru Are you passionate about what you do? Does working on and repairing cars really rev your engine? Then it’s time you were rewarded for your skills/experience. That’s why we believe in offering you an opportunity to work alongside some of the best and brightest technicians in the industry while earning a competitive wage. You’ll stay on top of your game by having access to ongoing training programs, as well as participating in on the job training within our exciting, fast paced environment. What we offer: • Competitive compensation, • A great working environment where you’ll be supported by a team of professionals, • Medical, Dental & Vision Insurance, • 401K Retirement Savings plan, • PTO, • Discounts on vehicle purchases, • High school diploma or GED, • Although equivalent education/experience will be considered, ideally you have 1 to 3 months of relevant experience and/or training, • Operator Driver’s License, • Examine and diagnose vehicles, • Discuss repairs with shop foreman or service advisor, • Provide labor estimates and communicate additional service requests to the Service Advisor, • Plan work in cooperation with shop foreman, • Monitor repair time and update service advisor, • Maintain strict adherence to dealership policies on vehicle care and operation, • Assist in mentoring technician trainees, • Attend company and factory training and keep current with factory technical bulletins Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Entry Level Technician – Kahlig Auto Group Technicians are in high demand. So to keep a good service tech, you have to treat them right. Here, you’ll work alongside some of the best in the business. You will perform light maintenance work and train with top notch technicians. We offer opportunities with the most respected and top performing brands on the road today. When you work for the Kahlig Auto Group, you have the opportunity to begin your career representing top brands including Audi, Chevrolet, Chrysler Dodge, Ford, Jeep, Lexus, Lincoln, Mazda, Subaru, and Volkswagen. We run an honest shop and need honest, hard-working techs. Only those who value integrity and ethics need apply. Enjoy five day work weeks. Responsibilities • Perform maintenance., • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work procedures in cooperation with shop foreman, • Provide labor time estimates to service advisor, • Monitor repair time and update service advisor regularly, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Attend company and factory training, • Keep current with factory technical bulletins High school diploma or GED (general equivalency diploma); or 6 to 12 months related experience and/or training; or equivalent combination of education and experience. Trade School perferred!! Certificates, Licenses, Registrations Operator Driver License State Inspection License perferred but not required! Benefits Benefits include medical, dental, life and disability, 401(k), paid vacation, sick, holiday and a wellness program. We are an Equal Opportunity Employer. About Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.

Job Description HOLT Truck Centers views the service department as a vital part of the dealership, and the way it builds open, honest, trusting relationships with customers and other departments is essential to the dealership's success. The main objective of the Service Technician is to diagnose and repair vehicle components and systems for the Service Department. Accountabilities • Perform unsupervised work as outlined on major repair orders with efficiency and accuracy, in accordance with dealership and factory standards., • Complete major repairs within specified times, • Diagnosis, troubleshoot, and repair non-typical vehicle issues, • Engage with external manufacturers and warranty contacts to maximize reimbursement of services, • Examine assigned vehicle to determine if further safety or service work is required or recommended, • Consult with service advisor about status of the vehicle repairs, • Provide technical expertise and guidance to all level of technicians, • Participate in manufacturer-sponsored training programs, schools, and events and make recommendations for other technicians within the shop, • Document all work performed and recommended on a repair order using accepted language, • Document all required information for the successful completion of a warranty claim, • Road test vehicles for evaluation purposes specifically for noise, vibration, and harshness to determine needed actions, • Ensure the customer's vehicles are kept clean. Notify the service advisor immediately of anything that has happened to change the appearance or condition of the vehicle, • Maintain a safe and clean work environment and recommend improvements for shop safety, • Maintain and be accountable for all dealership-owned tools and manuals. Identify issues with specialty tools and communicate to management. Make recommendations for tool replacement and inventory control, • Operate shop equipment safely, report safety issues, and recommend maintenance and repairs immediately to management, • Possess the ability to lead in a team environment, • Understand, keep abreast of current with, and comply with all federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA, EPA, and so on. Capable of identifying and communicating issues with management, • Display work ethic it takes to ensure each job is done efficiently and completely, • Possess great time management and organizational skills, • Be able to drive a vehicle and determine raod worthiness, • Must be able to pass a pre-employment drug screening and physical examination, • Must possess a current and valid driver's license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier, • Must be able to work in a fast-paced environment while providing a superior customer service experience, • Must be neat in appearance, punctual, and a team player, • Possess good communication skills, • Must be able to adjust to multiple demands and shifting priorities and be responsive and flexible to best serve the issue at hand, • ASE certifications, • Good organizational skills and strong attention to detail, • CDL and Class B or above license required within 6 months of hire, • Working knowledge of International Truck / IC Bus and supplier product, • Be able to use the International Service Portal when required, • Working knowledge of standard diagnostic software Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionThe Janitor/Porter helps ensure complete customer satisfaction by moving vehicles in and around the service area/lot, maintaining the cleanliness of vehicles and the service area, delivering vehicles to customers after service is complete, and transporting customers to/from their home when needed. We are looking for a reliable person to maintain a clean and safe work environment - responsible for cleaning and sanitizing the customer areas, bathrooms, and service shop. Responsibilities • Keep entire department in clean and orderly condition, • Perform any combination of the following duties: sweeping, mopping, scrubbing, and vacuuming hallways, stairs, and office spaces, • Use machinery to clean showroom floor, dust entire facility, and maintain multiple bathrooms and kitchen, • Empty trash and garbage containers, • Maintain minor and routine painting, electrical and other maintenance activities using hand tools, • Move and park vehicles, • Drive the shuttle van, • Work schedule will be assigned from Monday to Saturday (7am-6pm) by Service Manager, • Other duties as assignedQualifications, • Positive attitude, can-do mentality and eager to improve, • Previous janitorial and/or maintenance experience a plus, • Diligent work ethic and dedicated approach to performing duties, • Drive with care, • Valid driver's license and clean driving recordEmployees receive health insurance, basic term life insurance, 401k, vacation, sick leave and holidays. Overtime will be approved if need. This position is a great entry level job where you can learn about the automotive industry, gain mechanical skills, and move to other departments. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.All applicants are required to submit to a background check, drug screen, and MVR check.

Job DescriptionTechnician Trainee at Bluebonnet Chrysler Dodge Ram - Entry Level Construction on new facility on I35 starting late 2022!! Kahlig Auto Group's Bluebonnet Chrysler Dodge Ram has an amazing opportunity for someone who wants a career in the automotive industry with a family owned local dealer group. If you do repairs or maintenance or have aptitude to do so; have worked at a quick lube or independent shop, this is a rare opportunity for you to become a factory trained technician. Additionally, for the right individual, certification testing and tools will be provided as you Earn while you Learn a lifelong career. Job Purpose • Testing to check whether systems and components are secure and working properly., • Follow a checklist in ensuring that each critical part of vehicle is inspected such as hoses, belts, fuel systems, tires, brakes and other possible troublesome items., • Good knowledge of automobiles and light duty trucks, • Effective analytical and communication skills, • Good reading, basic math skills, and computer literate, • Ability to learn new technology, service and repair procedures and understanding specifications, • Must have at least a High School diploma/GED, • Enjoy working in a fast paced environment, • Able to lift up to 50 pounds and able to work on your feet for extended periods of time, • All applicants must be able to pass pre-employment testing to include background checks, drug test, credit report, and valid drivers license Benefits include medical and dental insurance, 401K retirement savings plan, vacation time, holiday and sick leave, company paid continuing education and training. Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex national origin, age, martial status, disability as well as other classifications protected by applicable federal, state. or local laws. About Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 350 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The Automotive Technician, reporting to the Store and Service Managers, is responsible for performing basic and advanced car maintenance and repair tasks, inspecting vehicles for potential problems, and troubleshooting issues to ensure vehicle is performing appropriately and the customer is taken care of. Primary Responsibilities include (but are not limited to): • Application of in-depth automotive repair knowledge, • Providing service of the highest quality to our customers, • Performs skilled mechanical work while analyzing and diagnosing problems, • Inspect, replace and/or repair defective parts while performing preventative maintenance on automobiles, • Continuously learn new technical information and techniques to stay abreast with rapidly changing automotive technology, • Demonstrate behaviors consistent with the company’s vision, mission, and core values in all interaction with customers, co-workers, managers, and suppliers, • Adhere to all company policies, procedures, and safety standards, • Maintain a safe, clean, and organized work areaQualifications We are looking for: • A minimum of 2 years’ automotive service, automotive mechanic, and/or engine diagnostic experience in a professional capacity, • ASE Certification preferred, but not required, • Must have Technician Tools, • Valid driver’s license, • Ability to operate and drive vehicles, • Ability to pass a pre-employment drug test and background screen, • Effective communication and interpersonal skills, • Top-notch customer service skills with a desire to build long term trust and relationships with our customers, • Willingness to work Saturdays Additional Information All information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects

Job Description Express Service Team Leader – Automotive Job Description Why wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech. you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly, developing and honing your skillset, and with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options. Job Responsibilities • Perform multipoint inspections, • Communicate additional service/repair needs to service advisors, • Conduct reviews with your team and report to the shop foreman, • Inspect fluid levels in steering gears, power steering reservoirs, transmissions, differentiasl, rear axle housings and shackles, • Check tire pressure, • Lubricate moving parts with specified lubricants, • Drain oil from crankcase and refill with required amount of oil, • Add water to radiator and battery, • Replace oil and air filters, • Inspect all vehicles for additional repairs, • Adhere to all company policies, procedures, safety standards and codes of conduct Compensation is based on experience and leadership attributes. Performance bonuses available Qualifications • Must meet dealership’s requirements for employment, • Ability to read/comprehend written instructions and information, • Familiarity with all aspects of automotive repair/maintenance, • Must have a valid driver license and be able to operate manual transmissions, • Prior experience as a technician’s helper or apprentice preferred, • Occasional exposure to inclement weather, • Ability to operate an automobile, • Prolonged periods of standing, stooping and bending, • Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than 10 pounds of force constantly to move objects, • Medical/Dental, • 401(k), • Drug Free work environment Since 1938, The Gillman Companies have been a family-owned and operated group of automobile dealerships. With over 70 years of success, the Houston-based automotive group has 14 dealerships across Houston, Rosenberg, San Benito, Harlingen, and San Antonio representing Acura, Honda, Mitsubishi, Nissan, Chevrolet, Buick, GMC, Chrysler, Dodge, Jeep, and Subaru. The company was founded by Frank Gillman when the first dealership opened on Milam Street in downtown Houston. Frank knew the importance of customer loyalty. He also understood that loyalty had to be earned. Over 70 years later, the location and scope of the business has changed, but the constant emphasis on customer satisfaction remains the same. Now run by Frank's Granddaughter Stacey Gillman, under her leadership, the Gillman Companies have grown to become one of the largest retail automotive groups in America. And today, the third Gillman generation is active in the business. Success has not altered the organization's founding principle. Every employee in every Gillman dealership knows customer satisfaction is paramount. And, they understand continued prosperity, as well as future growth, depends upon maintaining this long-established tradition of excellence.

Job Description Entry Level Technician – North Park Lincoln at Dominion Technicians are in high demand. So to keep a good service tech, you have to treat them right. Here, you’ll work alongside some of the best in the business. You will perform light maintenance work and train with top notch technicians. We run an honest shop and need honest, hard-working techs. Only those who value integrity and ethics need apply. Enjoy five day work weeks. Responsibilities • Perform maintenance., • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work procedures in cooperation with shop foreman, • Provide labor time estimates to service advisor, • Monitor repair time and update service advisor regularly, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Attend company and factory training, • Keep current with factory technical bulletins High school diploma or GED (general equivalency diploma); or 6 to 12 months related experience and/or training; or equivalent combination of education and experience. Trade School perferred!! Certificates, Licenses, Registrations Operator Driver License State Inspection License perferred but not required! Benefits Benefits include medical, dental, life and disability, 401(k), paid vacation, sick, holiday and a wellness program. We are an Equal Opportunity Employer. About Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.

Job DescriptionBenefits: • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Bonus Potential, • Paid transportation of your tools to our shops, • Opportunity for Continued Career Growth, • Fast Paced, • Friendly Team Environment, • Health/Dental/Vision, • Certificate Reimbursement, • Weekly Pay, • Saturdays optional for A Level techniciansNationally Branded Auto Repair Center is looking for the Most Important Part of Our Business, GREAT people to join our team! We believe you can take us to the next level, and we can do the same for you. We have built a business that challenges the norm, rewards excellence, and provides a comfortable life for all of us. We are always innovating, making improvements, and setting the bar higher for ourselves and the automotive service industry. Why our shop? • Center opened 6 days, closed Sunday., • Interact with people every day., • Up-to-date equipment and software. We use state-of-the-art software to run our shop efficiently and provide every customer with a wonderful experience., • Electronic Diagnostic, • Latest Digital Vehicle Inspections., • Culture of continuous improvement and growthWe are currently seeking Career Driven Highly Productive Technicians to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles., • Perform routine vehicle tune-ups and maintenance., • Provide labor and time estimates for automotive repairs., • Inspect and test vehicles for necessary adjustments., • Drive Manual, • Perform emissions test.Qualifications:, • 5 years experience as an automotive technician or mechanic, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills., • Deadline and detail-oriented, • Exhaust & welding experience a plus, • Must have tools.Why Meineke?, • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job DescriptionJob Description: The Certified and Master Certified Service Technician services and repairs vehicles following all established standards and procedures. In addition, he or she may be assigned to conduct pre-delivery service on new vehicles to ensure excellent working order for the customer. We deliver the highest quality service while maintaining the highest level of customer satisfaction. The ideal candidate has experience as a Service Technician. Possible experience may include: a high school diploma or GED, some post-secondary automotive training, dealer-level or large facility experience, and/or any additional certifications, such as certification by the National Institute for Automotive Service Excellence (ASE). An unrestricted driver's license and a clean driving record, a strong technical performance record, and strong physical dexterity and stamina to get the job done are required. He or she must be able to work productively in a fast-paced team environment and must have a positive attitude, professional appearance, great communication skills, and the ability to deliver world class customer service. This job description summary outlines core aspects of this position, but additional duties may be required on a routine basis. This job description does not constitute the complete responsibilities for this position. Responsibilities Certified and Master Certified Tech diagnoses issues based on experience, analysis and testing Master Certified Tech maintains highest level of training possible Maintains cleanliness of vehicles while performing service or repairs Ensures that required documentation is complete and is in compliance with regulations and standards Helps maintain shop appearance and safety standards and ensures the shop runs in an efficient manner by performing duties such as inventory stocking and other general functions Follows all shop policy, procedure, safety, and environmental rules Attends all staff meetings, trainings, and educational classes as required Performs other duties as assigned Job Requirement:Requirements Master Certified Tech should have dealer-level or large facility experience Master Certified Tech must have a high level of automotive mechanical/electrical knowledge High school diploma or GED Valid and unrestricted driver's license and clean driving record Professional and dependable Safety and customer service oriented Basic computer and internet skills Outstanding communication skills Professional appearance and work ethic Ability to read and comprehend instructions Able to bend, kneel, squat, stand, and lift heavy objects as needed Entry Level Tech may have work experience Compensation Competitive Pay Based on Experience Medical Benefits Paid Vacation Holidays Professional Workplace Non-Smoking Workplace Drug Free Workplace Opportunity for Advancement Direct Deposit 401(k) with Company Match The above statements are intended to describe the general nature and level of the work being performed by people assigned to this position. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. It’s time to make the most important move of your career! Apply Now!

Job Description About M&D For the past 80+ years, M&D has led the aftermarket in remanufacturing innovation to address technological advancements and changing customer needs. In the past few decades, we have expanded beyond our remanufacturing roots to develop close (and sometimes exclusive) partnerships with the world’s leading OEMs and manufacturers. Those partnerships with key suppliers like Bosch, Garrett, Federal Mogul, Cummins, Stanadyne, Holset, BorgWarner, Delphi, Yanmar, Mitsubishi, Denso and others have been critical in honing our remanufacturing capabilities and expanding our parts offering to include new, no core options in fuel injectors and fuel pumps, diesel engine cylinder heads, blocks, crankshafts and connecting rods. M&D also stocks a complete assortment of turbos (new and remanufactured), inframe overhaul kits, filtration and aftertreatment parts including DPFs, DOCs, EGRs, sensors and other engine parts. Our strong remanufacturing roots combined with our 41 branch locations, a nationwide outside sales team of 25 and our close OEM & Manufacturer partnerships make us unique in the industry – no one understands diesel engine failure analysis and parts better than M&D. WE FUEL UPTIME. Position Summary: The Diesel Fuel Injection Technician focuses on testing, disassembly, rebuilds, and replacing parts as necessary. Responsibilities: • Repair of fuel injection pumps and fuel injectors (training provided), • Clean and test HPCR Diesel Fuel Injectors on a Test Bench, • Test & rebuild all conventional mechanical injectors, • Disassemble and clean fuel injection pumps being rebuilt, • Testing of Electronic Common Rail Injectors, • Testing of Electronic Unit Injectors (EUI), • Operate and perform maintenance on injector test stands, • Calibrations to manufacturer specification, • Maintenance of test equipment as directed, • Follow directions and standard safety procedures, • Maintain a clean work environment Requirements: • Mechanical aptitude, • Work with hand tools., • Works with Micrometer and Caliper (We will train), • Manual dexterity up to 50 lbs., • Ability to stand at workstation throughout shift, • Must have High School Diploma or GED, • Must successfully complete pre-employment background and drug screening, • Fosters good coworker citizenship in the workplace, • Ability to work as an individual contributor while assisting co-workers as customer needs fluctuate, • Ability to multi-task in a fast-paced environment Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • Shop environment that can include exposure to loud noises, dirt, and dust, • Ability to squat, kneel, and bend over, • Ability to lift objects to shoulder level, • Ability to lift, move, and carry objects to 50 lbs. This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. M&D provides equal employment opportunity to all qualified applicants and employees without regard to race, color, sex, religion, national origin, age, sexual orientation, gender identity, marital status, familial status, disability, military status, and genetic information.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Service Technician – Automotive Skilled technicians are in high demand. So to keep a good service tech, you have to treat them right. Here, you’ll work alongside some of the best in the business. You’ll also be responsible for diagnosing and repairing client and dealership vehicles while maintaining positive relationships with clients. We run an honest shop and need honest, hard-working techs. Only those who value integrity and ethics need apply. We are an extremely busy shop with plenty of flat rate hours available for the right technician. We are extremely busy and have plenty of hours available. We are also structured to ensure we are not overstaffed so we do not STARVE anyone out. You show up we got the work!!!! 7am to 5pm / 8am to 6pm / 9am to 7pm - You pick! Please note - We are looking for experienced professional technicians that have tools and the drive to GET IT DONE!!!! Job Responsibilities • Examine and diagnose vehicles, • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work procedures in cooperation with shop foreman, • Provide labor time estimates to service advisor, • Monitor repair time and update service advisor regularly, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Assist in mentoring technician trainees, • Attend company and factory training, • Keep current with factory technical bulletins High School or GED. Trade school. 3 years or more mechanical experience. Certificates, Licenses, Registrations Operator Driver License is a must. 609 A/C is a plus Active ASE certificates are a plus. Compensation Compensation is based on experience and skillset. The more you know, the more you make. We will match your current PTO so you can maintain a work life balance. We will pay to professionally move your toolbox. Benefits • Medical/Dental/Life, • 401(k), • Drug Free work environment Since 1938, The Gillman Companies have been a family-owned and operated group of automobile dealerships. With over 70 years of success, the Houston-based automotive group has 14 dealerships across Houston, Rosenberg, San Benito, Harlingen, and San Antonio representing Acura, Honda, Mitsubishi, Nissan, Chevrolet, Buick, GMC, Chrysler, Dodge, Jeep, and Subaru. The company was founded by Frank Gillman when the first dealership opened on Milam Street in downtown Houston. Frank knew the importance of customer loyalty. He also understood that loyalty had to be earned. Over 70 years later, the location and scope of the business has changed, but the constant emphasis on customer satisfaction remains the same. Now run by Frank's Granddaughter Stacey Gillman, under her leadership, the Gillman Companies have grown to become one of the largest retail automotive groups in America. And today, the third Gillman generation is active in the business. Success has not altered the organization's founding principle. Every employee in every Gillman dealership knows customer satisfaction is paramount. And, they understand continued prosperity, as well as future growth, depends upon maintaining this long-established tradition of excellence.

Job Description Entry Level Technician – St. Philips and Kahlig Auto Group Partnership Technicians are in high demand. So to keep a good service tech, you have to treat them right. Here, you’ll work alongside some of the best in the business. You will perform light maintenance work and train with top notch technicians. We offer opportunities with the most respected and top performing brands on the road today. When you work for the Kahlig Auto Group, you have the opportunity to begin your career representing top brands including Audi, Chevrolet, Chrysler Dodge, Ford, Jeep, Lexus, Lincoln, Mazda, Subaru, and Volkswagen. As part of our partnership with St. Philip's College, we will place student's in the dealership that is the most appropriate considering experience, qualifications, location and business needs, but we encourage you to indicate your preferred interest as part of your application/resume. We run an honest shop and need honest, hard-working techs. Only those who value integrity and ethics need apply. Enjoy five day work weeks. Responsibilities • Perform maintenance., • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work procedures in cooperation with shop foreman, • Provide labor time estimates to service advisor, • Monitor repair time and update service advisor regularly, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Attend company and factory training, • Keep current with factory technical bulletins High school diploma or GED (general equivalency diploma); or 6 to 12 months related experience and/or training; or equivalent combination of education and experience. Trade School perferred!! This application is specific for students of St. Philip's College. All other applicants, are invited to apply to one of our other job postings. Certificates, Licenses, Registrations Operator Driver License State Inspection License perferred but not required! Benefits Benefits include medical, dental, life and disability, 401(k), paid vacation, sick, holiday and a wellness program. We are an Equal Opportunity Employer. About Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.

Job DescriptionDescription: Automotive Service TechnicianGenesis of NW San Antonio | A Red McCombs Automotive CompanyJoin a legacy. Build your future. Genesis of NW San Antonio is looking for an experienced Automotive Service Technician to join our growing, modern service department. At Red McCombs, you're not just another tech — you’re part of a family that’s proudly served Texans for generations and been named a Top Workplace for 15 years straight. If you’re ready to take pride in your work, grow your skills, and be part of something bigger, this is your opportunity. What You’ll Do · Diagnose and repair vehicles to manufacturer specifications · Perform routine maintenance (oil changes, brake inspections, tire rotations, etc.) · Use diagnostic tools to troubleshoot and solve problems efficiently · Work collaboratively with service advisors and parts staff · Complete high-quality work in a timely manner · Document repairs and maintenance accurately · Keep a clean, organized, and safe work area · Complete Genesis training and certifications to grow your career What We Offer · Competitive pay that grows with your experience · Up to $3,000 in tool assistance for new technicians · Health, dental, vision, and life insurance · 401(k) with up to $2,500 in company match annually · Paid time off, tenure bonuses, and Christmas savings plan · Paid education and manufacturer training · Employee discounts: o 25% off service o Cost-plus pricing on used vehicles o Factory pricing on new vehicles · Growth opportunities to become a Platinum Master Technician or transition into management · 5-day work week · Family-friendly events like our annual McCombs Family Picnic · Modern shop with state-of-the-art tools and equipment · A team that’s friendly, supportive, and committed to safety Requirements: What You’ll Bring · High school diploma or equivalent · Solid mechanical and diagnostic skills · Ability to work independently and as part of a team · Strong communication and attention to detail · Ability to lift up to 50 lbs. and stand for extended periods Be Part of Something Bigger At Red McCombs, we believe in craftsmanship, community, and creating a workplace where people take pride in what they do. If that sounds like you — apply today. We celebrate the diverse experiences of our team and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, or any other protected status under applicable law.

Job DescriptionCompany Description Christian Brothers Automotive Benefits: • *Up to $50/HR For The Most Skilled Technicians, • Paid Vacation & Paid Holidays, • Closed Every Weekend To Spend Time With Family & Friends, • Employer-paid Financial Wellness Program and App, SmartDollar & EveryDollar, • Nice Difference Welcome Bonus Available for Top Technicians, • Relocation Assistance For Top Technicians, • Employee Referral Program, • Earn More With Team Performance Bonuses, • Real-Time Automotive Technical Support, • Technician Training Paths To Assist With Career Development, • Guaranteed Hours, • Toolbox Relocation Assistance, • 4-Day Work Week Available, • Healthcare Benefits Available, • Matching Retirement Plans, • Locally Owned and Operated, • On-Going Training & Career Advancement, • ASE Certification Reimbursement, • Chaplain Care Support Available, • Tool Stipend Program For Driven Technicians Available, • Climate-Controlled Shop - Air Conditioned & Heated, • Employee Appreciation Events & Complimentary Meals Provided Weekly, • Work Boot Reimbursement Program Provided To Skilled Techs, • Gear up for Success - Uniforms are Provided so You Can Work Comfortably & Professionally, • Employee Point Store Access - Redeem Your Training Points For Awesome Swag & Rewards, • Continuous Training Available Through The CBA Flywheel Learning System, • Future Franchise Leadership Academy (FFLA) - Path to Shop Ownership AvailableJob Description Job Title: Automotive Technician / Mechanic Location: 15301 San Pedro Ave Job Overview: We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our guests. Responsibilities include, but are not limited to: • Technicians use their knowledge & skills to diagnose and fix vehicles for our guest, • Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles, • Complete full, accurate, and honest courtesy vehicle inspections, • Work as part of a team to troubleshoot guest concerns quickly and effectively, • Follow and promote our high standards of safety, cleanliness, and organization, • Work closely with the service department and effectively communicate concerns, • Work together with other technicians to solve problems, meet deadlines, and deliver distinguished resultsQualifications Qualifications: • Positive attitude and a desire to serve guest, • 3+ years of experience as an automotive technician/mechanic, • ASE Certifications preferred, or a plan to achieve, • Capable of diagnosing and repairing all makes/models of vehicles, • Meet or exceed hourly goals, • Aptitude for learning additional skills and processes, • Professional appearance and strong communication, • Occasionally lift and/or move over 100 pounds, • Be able to work with tools on vehicles lifted above their head, • Work in tight spaces as dictated by the vehicle’s needed repair, • Have the needed dexterity in order to efficiently use hand tools, • Walk/stand for the majority of their workday, • Drive manual transmissions vehicles, • Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Job Description Service Technician - Bluebonnet Ford Kahlig Auto Group is an industry leading automotive retailer comprised of 12 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides superior experience in sales, service, and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company. Here at Bluebonnet Ford Lincoln, we strive to ensure that our customers have the best car shopping and dealership experience of their life. We continually provide this level of service due to our amazing sales and service staff. If you want to be a part of a winning team, we welcome you to apply! Benefits • 401(K) Plan, • Medical Plan, • Dental Plan, • Life Insurance, • Paid Vacation, • Paid Sick Days, • Employee Purchase Plans, • 99 service bays, • A/C and heated Shops, • 5 Day Work Weeks, • Shop equipped with the newest technology, • Discounts on parts and labor, • Highly productive shop, • Top 10 Ford repair order volume dealer in the United States, • Career advancement opportunities, promote from within, • Continued education, manufacturer hands on and web-based training, • Clean and professional work environment, • Perform work specified on the repair order with efficiency and in accordance with dealership policies and procedures., • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment., • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are well-informed of any additional services needed., • Provide an estimate of time needed for additional repairs., • Ford technician certifications, • CDK DMS experience preferred, • Strong understanding of the service drive, • Years of experience vary per position, • High school diploma or equivalent, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills, • Excellent customer service skills, • Basic computer competencies, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Team player with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Able to operate electronic diagnostic equipment• Valid state of residence driver's license

Job Description pharaoh imports & domestics is Hiring Experienced Automotive Technicians! Are you a seasoned automotive technician with a passion for diagnostics and repairs? Look no further! pharaoh imports and domestics, a leading vehicle service shop, is seeking highly experienced technicians to join our dynamic team. Position: Experienced Automotive Technician Experience Required: Minimum 15 Years Responsibilities: • Conducting complex diagnostics and repairs on a variety of vehicles, • Identifying and resolving technical issues efficiently, • Performing routine maintenance tasks with precision, • Minimum 15 years of hands-on experience in automotive diagnostics and repairs, • Proficient in using diagnostic tools and equipment, • Strong problem-solving skills and attention to detail, • Ability to work independently and as part of a collaborative team, • Competitive compensation package (salary will be commensurate with experience), • Retirement savings plan, • Generous paid time off If you are an experienced automotive technician looking for a challenging and rewarding opportunity, we want to hear from you! To apply, please submit your resume and a cover letter highlighting your experience to email or drop by our location to fill out an application in person. no lube techs no no ware forklift operators i f you are not an experienced automotive technician and only automotive ( cars , small trucks ) DO NOT APPLY pharaoh imports & domestics is an equal opportunity employer. We encourage applications from candidates of all backgrounds and experiences. Join us in shaping the future of automotive service excellence! Company Descriptionwe invest in equipment and employees , we buy the latest and greatest equipment, work on all makes and models, o pressure and no nagging, no Saturdays, the happiness of our employees is just as important to us as customerswe invest in equipment and employees , we buy the latest and greatest equipment, work on all makes and models, o pressure and no nagging, no Saturdays, the happiness of our employees is just as important to us as customers

Job Description We are Engineered to Serve. Tindall Corporation is a leading Precast Concrete Manufacturer, with locations throughout the Southeastern U.S. Our mission is to support our customers, create remarkable structures, and deliver never-before-seen solutions every step of the way. Our employees enjoy benefits including: Low Cost Employee Health plan, Dental, Vision, STD/LTD, Fully-paid Basic Life, Voluntary Life, Whole Life, Accident, Hospitalization, Critical Illness, EAP and a 401k Plan with Company Match & Profit Sharing. Summary of Primary Functions: Applies wet finishes or dry finishes to concrete members as required by shop cards. Essential Duties and Responsibilities: * Reviews shop cards for previous day’s pour. * Saws off strand ends and applies galvanizing compound. * Burns off strand ends and applies patching material to achieve finishing requirements; Cleans concrete off connection plates and applies spray paint. * Strips off blockouts and cutbacks and salvages woodwork as needed; Rock/grinds PVC blockouts, lifting loop blockouts, cutbacks/blockouts, washes, etc. * Applies grout to form sides of concrete members to fill in small bug holes. * Applies #8 or #13 finishes to concrete members, as needed. * Bull float or hard float wet concrete, as needed. * Places surface plates or lifting devices in wet concrete. * Performs required finishes as requested by Supervisor. Job Specifications or Qualifications: Education and/or Experience: High School Diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Work Environment: While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts and occasionally exposed to wet and/or humid conditions and vibration. The noise level in the work environment is usually loud.

Job Description Service Technician – Automotive - North Park Lexus San Antonio Why wait to make a career out of doing what you love? Some of our best master technicians started as service techs. So if working on cars gets your gears moving, contact us today. With a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options. Responsibilities • Examine and diagnose vehicles, • Discuss repairs with shop foreman or service advisor, • Communicate additional service requests to service advisor, • Plan work procedures in cooperation with shop foreman, • Provide labor time estimates to service advisor, • Monitor repair time and update service advisor regularly, • Maintain strict adherence to dealership policies on vehicle care and operation, • Complete story and/or documentation for client repairs, • Assist in mentoring technician trainees, • Attend company and factory training, • Keep current with factory technical bulletins High school diploma or GED (general equivalency diploma); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience. Certificates, Licenses, Registrations Operator Driver License State Inspection License Benefits Benefits include medical, dental, life and disability, 401(k), paid vacation, sick, holiday and a wellness program. We are an Equal Opportunity Employer. About Kahlig Auto Group is an industry leading automotive retailer comprised of 10 auto dealerships in South Texas. Our dealerships have a strong commitment to providing the highest degree of customer satisfaction that provides a superior experience in sales, service and overall ownership. We are a company full of hard-working, dedicated employees with a priority on offering a welcoming and positive environment that fosters the opportunity to grow within the company.