Test engineer jobs in Bellevue, WashingtonCreate job alerts

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities As a Signal and Power Integrity Engineer, you will be responsible for defining and developing Signal and Power Integrity test methodologies, participating in design reviews, performing SI and PI simulations, providing reports, collaborating with other engineers to develop solutions, and working to ensure a high technical bar for PCB power across Kuiper. A day in the life Engineers on the Signal/Power Integrity (SI/PI) team work across the entire Kuiper satellite system, providing design inputs, developing requirements, establishing best practices, performing power integrity simulations, and working with designers to make design improvements. About the team The SI/PI team interacts broadly across the entire Kuiper project to deliver electrical designs. You will have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you highly reliable, power efficient, performant, low cost satellite bus and payload. You will learn a lot, have fun and make a positive impact on millions of people. • Bachelor's Degree in Electrical Engineering, or equivalent experience., • 4+ years of experience in hardware development, • 4+ years of experience in PI simulations and lab validation, • Experience using simulation tools such as ANSYS, CST, Hspice, ADS, Hyperlynx, etc., • Experience using VNAs, oscilloscopes and probing techniques., • Experience participating in schematic and design reviews., • Experience with schematic and layout ECAD tools – Mentor Xpedition preferred, • Demonstrated design innovation in complex board design, • Experience in high frequency power integrity simulation and analysis, • Experience in silicon (on-chip) and package power delivery network principles, • Experience using Apache Redhawk and/or Voltus IR/DvD tool set Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Troubleshoot production issues in a timely manner, • Support and manage daily production operations and eliminate blockers and/or part shortages, • Work with cross functional teams to solve production issues, • Provide design for manufacturability feedback and drive positive continuous change to hardware, • Work with process, quality, and design engineers to continuously improve manufacturing processes A day in the life As a Manufacturing Engineer this person will be supporting the technician team by resolving any obstacles and working with responsible engineers to disposition non-conformances. This individual will work closely with engineering teams in specifying and building or procuring tools and line equipment for Kuiper hardware builds. The successful candidate has some basic experience in supporting production of space hardware through development, QTP (qualification test procedures), and flight hardware ATP (acceptance test procedures). About the team We are a fast-paced, data-driven team, and work with leaders in multiple technology areas to deliver the best product for our customers. We hold each other to relentlessly high standards, and constantly look for ways to improve the product’s performance, quality and cost. We are excited about the technical challenges, which motivates us rather than discourages us. We want individuals who are ready for this challenge and want to reach beyond what is possible today. • 5+ years supporting production in a manufacturing capacity or related field, • 5+ years experience with enterprise systems, • 5+ years experience with RCCA, • Experience working with interdisciplinary teams to execute product design from concept to production, • Master's degree in Mechanical Engineering or equivalent Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Project Kuiper's Propulsion Team seeks a Flight Operations Engineer to support the execution of the full mission lifecycle for Kuiper's satellite constellation. This critical support spans: propulsion pre-launch and go/no-go decisions; early mission propulsion checkouts and commissioning; ascending each vehicle to the altitude and station necessary to provide customer service; formation keeping for the service life of each satellite; as well as the the descent and decommissioning of each satellite. This role will work with Kuiper's Mission Operations team, and other Guidance, Navigation, and Control operators to ensure the safe and effective execution of each satellite's mission. The Propulsion Operations Engineer serves as a critical liaison between Kuiper Mission Operations and the Propulsion Design Engineering team, executing approved operational responses while supporting the development of improved operational automation. This role combines hands-on operational support with the continuous improvement of processes and automated operational capabilities for the Kuiper Propulsion System. A significant portion of the position focuses on developing and improving automated operational responses, including telemetry monitoring and flight data analysis. The engineer will be responsible for creating and reviewing new scripted operations procedures, enhancing existing automated sequences, and formulating responses to novel scenarios that arise. This work requires close collaboration with GNC and Propulsion design engineers (both hardware and software) to ensure all solutions align with established safety and operational parameters. The role involves active participation in troubleshooting and investigating in-flight anomalies, working alongside propulsion subject matter experts and systems engineers. The engineer will contribute to maintaining propulsion system operational health by identifying and assessing potential risks, while also evaluating system health and maneuverability across the constellation, applying criteria approved by the Propulsion Design Engineering team. Professional growth opportunities include potential cross-training in other GNC disciplines, such as attitude determination and control, and supporting the GNC's Flight Dynamics Operations team. This expansion of responsibilities helps ensure comprehensive understanding and support of constellation operations. Given that automated constellation operations run continuously throughout the year, this position requires flexibility in work scheduling. Initially, the role may involve standard working hours with rotating 24/7 on-call responsibilities. As the team expands, the schedule will evolve to cover morning, night, and day shifts across all days of the week, distributed among a team of operators. This scheduling structure ensures continuous coverage and support for the constellation's operational needs. Key job responsibilities Operations Engineering • Serve as primary operational liaison between Propulsion Design Engineering and Kuiper flight operations stakeholders, • Execute defined propulsion operational responses, • Monitor and assess propulsion system health across the constellation, • Support investigation and troubleshooting of in-flight anomalies, • Escalate to responsible engineers for scenarios where existing automation or runbooks do not apply, • Document operational instructions and procedures for the benefit of other Propulsion operators Automation & Software Development • Develop and enhance operational procedures, both manual and automated, • Create and review scripted operations procedures (i.e. software development), • Improve telemetry monitoring and flight data analysis capabilities, • Support continuous automation improvements for operational sequences, • Formulate responses to new operational scenarios for review and approval from the Propulsion Design Engineering team Risk Management & System Health • Identify and assess operational risks, • Collaborate in the definition of risk mitigations, owning the their implementation and in-space execution, • Apply and scale mechanisms to asses propulsion system health & maneuverability during all mission phases, • Contribute to improvements propulsion system concepts of operations (CONOPs) Schedule Availability Requirements • Staff rotating shifts including early morning, late night, and weekends - on a rotating basis constrained by 40h shift assignments, • Respond to needs for 24/7 on-call support on a rotating basis About the team Kuiper's Propulsion Design Engineering team is part of the broader Guidance, Navigation, and Control (GNC) organization. The Propulsion Design team includes subject matter experts in propulsion technologies, systems engineers, test engineers, mechanical design engineers, and technical program managers. Flight operations is currently supported by this engineering team, and this role is part of an effort to hire and develop dedicated support for Flight Operations to support full scale constellation operations. • Bachelor's degree in Engineering, Computer Science, or a related technical field, • Knowledge of programming languages such as C/C++, Python, Java or Perl, • Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays, • 3+ years of professional work (non-internship) experience, • Experience working with version control systems, • Ability to work at computer workstations for extended periods, • Ability to respond to urgent on-call situations, • Experience with real-time system monitoring and anomaly response, • Demonstrated ability to execute technical procedures and follow operational protocols, • Experience with data analysis tools and software, • Experience in satellite operations, • Experience in ground systems development of satellite operations systems, • Experience in any of the operations roles in satellite navigation, conjunction risk assessment, and maneuver planning., • Experience in cloud-based software systems development Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $116,300/year in our lowest geographic market up to $201,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As a Senior Hardware Engineer, you will be a part of the team of experts working on the development of advanced antenna systems. You will own or contribute to the following: · Design and optimization of different blocks of antennas system · Design the proof of concept systems and prototypes for the next generation of the antennas · Design of RF circuitry in collaboration with RF team · Design of automated test systems, test fixtures and factory test · Bring-up and test campaigns of the active antennas · Lead and review PCB layout Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. • BS degree in electrical engineering or computer engineering, or equivalent experience, • 7+ years of industrial experience especially board level analog/digital design, • 3+ years of experience in high-speed digital design, multi-gigabit SERDES, signal and power integrity, • 3+ years of experience in using schematic, • 2+ years of experience using lab equipment, including oscilloscopes, logic analyzers, and multi-meters, • Experience with Mentor Graphics or Cadence layout tools, • Masters of Science or PhD in electrical engineering or computer engineering, • Familiarity with analog electronic fundamentals (transistor circuits, op-amps, filters, etc), • Experience in design, implementation, bring up and debugging of proof of concept HW and prototypes, • Familiarity with power supply design, • Proficiency in developing programs for instrument control, • Previous work experience in a programming language Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! Key job responsibilities As a Sr. Satellite Terminal Validation Engineer, you will be responsible for Customer Terminal (CT) integration and validation with hardware, software, and firmware. You will be working in a collaborative environment with a multi-disciplinary team. In this role, your responsibilities include: • Define CT systems architectures and specifications, • Design tradeoffs of various CT architectures including RF and performance simulation to support tradeoff decisions, • Develop integration & test Software & Firmware for lab verification measurements., • Develop, maintain, and support customer terminal validation hardware and software, • Proactive engagement with internal and external development partners on Systems’ hardware and software architectures and implementation, • Ensure delivered work meets technical, functional, performance, regulatory and business requirements, • Perform in-field test and validation of various CT architectures, • Traveling up to 20% of the time, depending on project phases Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the life As a Sr. Satellite Terminal Validation Engineer on the Kuiper Customer Terminal Team, you will work daily with electrical hardware, RF, antenna, silicon, and product design engineers, as well as software and operations teams in a collaborative environment. Your focus will be on architecting, integrating, and verifying customer terminal functional performance to ensure it delights our customers. About the team The Kuiper Customer Terminal team is responsible for developing both outdoor & indoor devices, enabling customers internet service via the Kuiper satellite network. We own the entire process from early prototypes through mass production including requirements documents, architecture definition, hardware development, and all integration/verification testing. • 5+ years of programming with at least one modern language such as C++, C#, Java, Python, Matlab, Golang, PowerShell, Ruby experience, • 5+ years of deploying and operating in a Linux/Unix environment experience, • 5+ years of systems design, software development, operations, automation, and process improvement experience, • Experience leading the design, build and deployment of complex and performant (reliable and scalable) software solutions in production, • BS or equivalent in Computer Science, Electrical Engineering, Physics or related field, • 5+ years in SW/HW development environment with at least 3 recent year in architectural/system role, • 5+ years experience in development for complex telecommunication, high speed digital, antenna, and/or satellite communication systems, • Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations, • Experience working with mobility satellite terminals such as maritime and aeronautical., • Experience developing in LabView and Matlab, • Experience taking a leading role in building complex software or computing infrastructure that has been successfully delivered to customers, • Master/PhD degree in Computer Science or Electrical Engineering, • Familiar with satellite communication theory, • Familiar with phased array designs and implementations, • Satellite over-the-air Communication field-trial experience, • Debugging skills for systems integration from RF front-end to baseband Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Come work at Amazon! Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started. We seek professionals who are eager to join an ambitious project that continues to push the state of the art in satellite system design, verification test, and operations. Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for a Sr. Hardware Test Engineer who combines superb technical capabilities with a demonstrated ability to get the right things done quickly and effectively. You will work with a team of top-notch engineers and will collaborate with multiple spacecraft design, test, and operations teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun, and make a positive impact on tens of millions of people. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Liaison with production on behalf of engineering as the first point of contact for operational support and triage of issues regarding Line Replaceable Unit (LRU) hardware testing and manufacturing., • Work to optimize manufacturing test flows for avionics systems, improving quality, efficiency, rate, and overall robustness of the process flow., • Review and approve manufacturing processes and/or work procedures for test of avionics LRUs., • Drive disposition and corrective actions for non-conformances occurring during production testing., • Provide training and improve work instructions for production operators to reduce need for engineering support on repeat issues., • Lead Material Review Board (MRB) efforts for avionics PCBAs/subsystems, drive Root Cause Analysis (RCA) of nonconforming materials, and provide feedback on findings to PCBA quality and manufacturing engineering partner teams., • Maintain and update test station documentation including troubleshooting guides and work instructions., • Work with the test engineering team to improve test stability, reduce test time, and guarantee the quality of the measurement data., • Work with production manufacturing engineering to improve process flow and reduce test set up and workmanship errors., • Work with the quality and manufacturing engineering teams to ensure high quality space flight hardware., • Execute test rack commissioning for new production test stations or upgrades to existing stations due to new design revisions., • Coordinate yearly test rack calibration and recommissioning test systems back to production., • Troubleshoot and repair test set ups., • Develop reporting tools on manufacturing KPIs., • Travel to CMs to set up on-site testing and train technicians/operators. A day in the life As a Sr. Hardware Test Engineer you will work within the avionics engineering team to support production and delivery of satellite avionics hardware Line Replaceable Units (LRUs) into the Kuiper satellite integration line. You will be responsible for dispositioning nonconforming parts, leading the material review board (MRB) for your system(s), and working with the electrical engineering, test engineering, test software, and manufacturing teams to root-cause issues for both PCBAs/LRUs and test systems. You will support the overall manufacturing test flow and strive for process excellence, looking for opportunities to improve yield and efficiency. You will be an expert in how your subsystem(s) are tested and provide training support for manufacturing technicians, as well as co-develop and sign off on manufacturing procedures. This position requires a technical understanding of functions of avionics subsystems and strong lab and test skills. You will have the opportunity to dive deep on our PCBA designs and test systems and must be able to effectively work cross-functionally with multiple disciplines. About the team Our team design, tests, and delivers avionics subsystems such as the flight computer, power management and delivery, RF, and sensing subsystems on the satellite bus. Our team designs and delivers the test systems that enable qualifying and acceptance testing these hardware subsystems for the satellite. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Project Kuiper. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities! • BS degree in an engineering discipline or equivalent experience., • 7+ years demonstrated experience in a design, test, or production manufacturing role with new or established product lines in production., • Experience with manufacturing test flows and automation within space, automotive, industrial, or consumer electronics industries., • Experience or familiarity with root cause analysis of electronic devices., • Experience with lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc., • Experience testing with SoCs, DRAMs, FPGAs, multi-gigabit interfaces, power converters, sensors, operational amplifiers, and ADCs/DACs,., • Experience with schematic and layout ECAD tools., • Experience with complex board designs, including high-speed interconnects, high-reliability designs, avionics, vehicle control systems, and/or motor & actuator control electronics., • Experience with debugging designs with microprocessors, FPGAs, power supplies, and sensors., • 10+ years demonstrated experience in a design, test, or production manufacturing role with new or established product lines in production., • Experience across a whole product lifecycle, from conception to sustained production., • Experience in statistical analysis of manufacturing and test processes (MSA, Gage R&R, capability studies)., • Experience with space hardware qualification (MIL Std 1540 / SMC-S-016) and test campaigns., • Experience working with interdisciplinary teams to execute product design from concept to production., • Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc., • Experience with control and automation of thermal chambers for hardware product testing., • Demonstrated ability to manage technical projects from inception to mature execution., • Fundamental knowledge of PCBA manufacturing and test flows., • Solid understanding of PCBA bring-up, test, and debug., • Experience with data analysis tools (Python, MATLAB, etc.) to decompose manufacturing process efficiency, yields, etc. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As an Opto-Electrical Liaison Engineer on the OISL team, you will support the production and integration of high-speed optical and electronic communication hardware. This role spans optical transceivers, laser drivers, detectors, and supporting electronics—ensuring hardware is debugged, validated, and delivered with high quality and performance. Key job responsibilities • Applies knowledge of OISL design principles to assess and resolve opto-electrical product/process issues through the product lifecycle., • Analyzes, conducts root cause analysis, and develops dispositions for design and build non-conformances., • Applies engineering principles to investigate technical, electrical, and quality issues that cannot be resolved by production teams and implements solutions., • Identifies and documents reported issues, and communicates deviations that may impact functionality, performance, or test coverage; manages resolution and closure., • Reviews and dispositions non-conformances related to PCBs, laser modules, detector circuits, and harnessing through all phases: procurement, manufacturing, test, and integration., • Develops standard rework procedures, test coverage improvements, and board-level DFM feedback., • Works closely with quality, firmware, hardware, and systems engineering teams to ensure functional performance is met., • Collaborates with CM/OEM vendors and internal suppliers for resolution of electrical integration issues. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the life Each day begins by reviewing test data, addressing non-conformances, and aligning with quality, integration, and design teams. You’ll investigate root causes—whether optical, electrical, or mechanical—then propose and implement solutions to keep hardware on track. Hands-on work may include troubleshooting hardware, authoring rework instructions, or validating process improvements on the floor. You balance speed and rigor, ensuring fixes are well-documented and maintain design intent. Your efforts directly support the delivery of reliable, space-ready optical inter-satellite link systems. About the team The OISL team develops and delivers space-based optical inter-satellite link systems, enabling high-speed laser communication across the Kuiper constellation. The team focuses on precision hardware, alignment, and system reliability to meet the demanding requirements of space borne optical networks. • BS in Electrical Engineering, Photonics, or related field., • 5+ years of experience with electro-optical hardware development, including analog/mixed-signal design., • Experience with working knowledge of laser drivers, TIAs, photodiodes, and high-speed PCB layout practices., • Experience using lab instrumentation such as oscilloscopes, BER testers, optical power meters, and spectrum analyzers., • Experience with EMI mitigation, ESD safety, and grounding/shielding strategies., • Experience in telecom, datacom, or aerospace optical communication systems., • Familiarity with embedded firmware and digital diagnostics in opto-electronic systems., • Experience supporting design-for-test (DFT), DFM, and qualification in high-reliability environments. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. THE ROLE Have you wanted an opportunity to manufacture electric propulsion systems for an advanced satellite constellation? The Propulsion Manufacturing Engineer will develop, implement and refine processes used to fabricate and qualify electric propulsion systems. You will mentor colleagues within the team. Key job responsibilities • Support architecture determination and designing the propulsion system configuration, • Provide input into designs to enhance manufacturability and reduce costs, • Develop and own inspection, manufacturing, qualification and acceptance tests including hardware and workflow design, • Design and carry out process development tests, • Process and interpret assembly and test results to generate design guidance., • Coordinate with other Kuiper team members to establish a path towards volume production., • Experience in developing functional specifications, design verification plans and functional test procedures, • 6+ years supporting production in a manufacturing capacity or related field, • Master's degree in electrical engineering, computer engineering, or equivalent, • Experience working with interdisciplinary teams to execute product design from concept to production, • Experience with the project management of technical projects Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. The Kuiper Propulsion Team is seeking a Test Engineer Manager to lead the Propulsion Development Test Team. This team of engineers supports the development and continued improvement of propulsion flight hardware and its test infrastructure. The team is responsible for the design, build, optimization, and execution of electric propulsion testing of all propulsion subsystems, including the Hall effect thruster, cathode, feed system, avionics, propellant storage, and integrated propulsion system. Development testing is focused on characterizing and validating existing flight designs and development hardware. Test objectives include improved understanding of failure modes to inform design improvements, production acceptance testing non-conformance investigations, and root cause investigations of on-orbit anomalies anomalies. This team will work closely with Propulsion’s Production Test Team, supporting improvements and scaling of production acceptance test infrastructure and process improvements. Key job responsibilities • You will work with stakeholders across the Propulsion Manufacturing and Design Teams to coordinate and support development test efforts., • Your team will define and document test processes and implementation, including test plans & detailed procedures, test software development, test execution, data analysis, and test reports. Your team will develop new test capabilities and optimize existing test systems for both production and development testing., • In addition to building up the needed test infrastructure and execution of development testing, your team contributes to finding solutions to challenging technical problems by investigating root causes for hardware and test failures, and assists in the disposition of production & flight non-conformances., • Your team leverages the growing amount of ground-test and flight data to inform determination of the severity and prevalence of observed anomalies, and formulate methods to accelerate production acceptance testing without impacting hardware screening capabilities., • You will lead by example by developing a strong understanding of the flight hardware and its test systems as well as contribute to hiring, mentoring, and career growth of the engineers on your team, and within the Propulsion Manufacturing and Engineering organization. A day in the life The Propulsion Development Test Engineer Manager leads the team by example to ensure capabilities and plans are available to test existing hardware and candidate design improvements. You will work closely with other teams within the Propulsion Group such as the design, subject matter expert, production test, and manufacturing teams in order to execute development test needs and to maintain deep knowledge of both the hardware under test and test venues. A successful candidate thrives in a fast-paced environment and is able to apply their technical expertise and commitment-to-quality to positively impact organization goals. To be successful, you will need to be highly motivated, detail oriented, and demonstrate high standards of execution. About the team The Kuiper Propulsion Design Team is responsible for the design and development of the propulsion system which provides maneuvering capability to the spacecraft. The Propulsion Design Team is made up of engineers from a variety of disciplines (e.g. aerospace engineering, physics, electrical engineering) which are responsible for different aspects of the development process: such as mechanical design, systems engineering, propulsion subject matter experts, manufacturing, and test. This integrated team structure allows direct communication and rapid process feedback while also promoting close collaboration across the team. • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Physics, Electrical Engineering, or equivalent experience, • 2+ years experience managing engineering teams, • 5+ years developing test automation, data acquisition, or control software, • 5+ years experience with electrical test equipment and data acquisition systems, • 5+ years of developing, executing, and optimizing test processes, • 5+ years investigating hardware failures, performing root cause analysis, and delivering written reports to engineering teams, • Advanced degree (M.Sc., Ph.D.) in Aerospace Engineering, Mechanical Engineering, Physics, Electrical Engineering, or a related field., • Experience managing engineers for the testing of satellite propulsion hardware, • Experience developing software with Python, LabVIEW, or TestStand, • Experience testing electric or chemical propulsion systems - or their subsystems, • Experience developing and operating pressurized fluid systems in aerospace environments, • Experience developing test processes in a production environment, • Experience working with space flight hardware, • Experience with Highly Accelerated Stress Screening (HASS) or quantifying strength of screening metrics for production test venues. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $135,900/year in our lowest geographic market up to $234,900/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Come work at Amazon! Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started. We seek professionals who are eager to join an ambitious project that continues to push the state of the art in satellite system design, verification test, and operations. Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for a Sr. Electrical test engineer who combines superb technical capabilities with a demonstrated ability to get the right things done quickly and effectively. You will work with a team of top-notch engineers and will collaborate with multiple spacecraft design, test, and operations teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun, and make a positive impact on tens of millions of people. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Work with key stakeholders across hardware and software development teams to define test strategy and requirements., • Define electrical component and subsystem test plans as needed to ensure robust electrical designs for space applications., • Lead the planning and execution of design verification test, qualification, reliability, and production test campaigns for avionics subsystems., • Support the various aspects of the test engineering team through test system architecture, equipment selection, PCB design, harness design, test system build and integration, and test system commissioning and delivery to customers., • Lead test system design reviews, test plan reviews, test readiness reviews, and test results reviews., • Partner with cross-functional teams including electrical engineering, RF engineering, mechanical engineering, software, reliability, manufacturing, program management, etc. A day in the life As part of the Avionics Test Engineering team, you will develop and deliver test systems for avionics subsystems for both development and production test. You will be responsible for development test campaigns, which include board level electrical design verification test, LRU qualification test, and reliability test. About the team Our team designs and delivers the test systems that enable qualifying and acceptance testing the hardware subsystems for the flight computer, power delivery, and RF systems on the satellite avionics bus. Our team leads design verification, qualification, and reliability testing for our avionics subsystems. • BS degree in Electrical Engineering, Computer Engineering or equivalent., • Experience with lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc., • 5+ years testing with SoCs, DRAMs, FPGAs, multi-gigabit interfaces, power converters, sensors, operational amplifiers, and ADCs/DACs,., • Experience with schematic and layout ECAD tools., • Experience with complex board designs, including high-speed interconnects, high-reliability designs, avionics, vehicle control systems, and/or motor & actuator control electronics., • Experience with debugging designs with microprocessors, FPGAs, power supplies, and sensors., • 7+ years designing and/or testing with SoCs, DRAMs, FPGAs, multi-gigabit interfaces, power converters, sensors, operational amplifiers, ADCs/DACs, high speed printed circuit boards, and harnessing., • Experience with writing test specifications and procedures., • Experience with executing test, reporting/ dispositioning bugs, and providing status/results updates., • Experience with space hardware qualification (MIL Std 1540 / SMC-S-016)., • Experience in two or more areas: EMI/EMC test, design verification test, radiation test, reliability test, and vehicle integration & test., • Experience as a technical lead designing test systems that have been deployed in a production environment., • Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc., • Experience with control and automation of thermal chambers for hardware product testing., • Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design. Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum Key job responsibilities We are looking for an excellent engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively: • Be the first point of contact between production, test, and design teams for operational support and triage of issues regarding hardware testing and manufacturing., • Work to optimize manufacturing test flows for avionics systems, improving quality, efficiency, rate, and overall robustness of the process flow., • Review and approve manufacturing processes and/or work procedures for assembly and test of avionics devices., • Drive disposition and corrective actions for non-conformances occurring during production testing., • Lead MRB efforts for avionics PCBAs/subsystems and driving RCA of nonconforming materials with development engineers., • Provide training and improve work instructions for production operators to reduce need for engineering support on repeat issues., • Troubleshoot and repair test set ups., • Work with the test engineering team to improve test stability, reduce test time, and guarantee the quality of the measurement data., • Work with production manufacturing engineering to improve process flow and reduce test set up and workmanship errors., • Develop reporting tools on manufacturing KPIs., • Travel to CMs to set up on-site testing and train technicians/operators. A day in the life As a Sr. Power Avionics Hardware Test Engineer you will work within the development engineering team to support production of avionics hardware. You will be responsible for dispositioning nonconforming parts, and leading the material review board (MRB) for your system(s); working with the design team to root-cause issues for both components and test systems. You will support the overall manufacturing test flow and strive for process excellence, looking for opportunities to improve yield and efficiency. You will be an expert in how your system(s) are tested and provide training support for manufacturing technicians, as well as co-develop and sign off on manufacturing procedures. You will work with a team of top-notch engineers and collaborate with multiple other spacecraft design and integration teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on tens of millions of people! About the team Our team is responsible for designing and delivering power avionics subsystems such as propulsion control, solar array deployment and control, and magnetorquer bars. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Project Kuiper. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities! • BS degree electrical engineering or equivalent experience., • 7+ years demonstrated experience in a design, test, or production manufacturing role with new or established electronics product lines., • Experience with manufacturing test flows and automation within space, automotive, industrial, or consumer electronics industries., • Experience or familiarity with root cause analysis of electronic devices., • Experience with space hardware qualification and test campaigns., • Experience across a whole product lifecycle, from conception to sustained production., • Experience in statistical analysis of manufacturing processes (Cpk, Ppk, etc.), • Experience working with interdisciplinary teams to execute product design from concept to production, • Demonstrated ability to manage technical projects from inception to mature execution., • Fundamental knowledge of PCBA manufacturing and test flows., • Solid understanding of PCBA bring-up, test, and debug., • Experience with data analysis tools (Python, MATLAB, etc.) to decompose manufacturing process efficiency, yields, etc. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $122,400/year in our lowest geographic market up to $211,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

As a Sr. Mfg Quality Engineer, you will have the opportunity to own product performance for some of the most critical sub-assemblies of the satellite, delivering creative solutions to reduce defects, and planning to prevent defects using technical quality skills. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum Key job responsibilities • Lead as Product QE over satellite mechanism assemblies, including process definition and validation for assembly and test methods, part and process qualification, inspection plans, in-process inspection capabilities, and process monitoring., • Lead MRB discussions determine product dispositions for nonconforming material., • Dive deep into defect reduction activities for the mechanism subassemblies, and drive innovative solutions to prevent recurrence of defects., • Work directly with Inspection, Supplier Quality, and Engineering teams to develop and qualify inspection, monitoring, and verification methods for the Kuiper Production System all through the production system and ensure a no defect mentality, • Be a Quality SME for the mechanisms sub-assemblies, owning defect reduction, reporting, and overall quality performance of the mechanism subassemblies, including electromechanical hardware, high cleanliness/FOD sensitivity, tight tolerance & high precision machined parts, high criticality attributes, • Lead and develop new and novel process mechanisms for cross functional production system teams. A day in the life • Own yield performance for the mechanisms subassemblies, setting up monitoring systems using production data, and leading projects to creatively deliver solutions to recurring issues in production, • Investigates Production System issues to reduce defect rates and drive root cause corrective actions, and continuous improvement projects, • Implements the Kuiper Quality System through process development and launch mechanisms across teams similar to AS9100 requirements, • Own and report out on product performance to quality and manufacturing leadership., • Partners with cross-functional groups to develop and qualify product, processes, and equipment, including Quality Assurance processes, • Perform audits to ensure compliance to QMS and product requirements., • Develop and modify process flow diagrams, PFMEAs, control plans, MSAs, and other APQP artifacts related to satellite mechanisms. About the team The Kuiper Manufacturing Quality team is driven to deliver high-quality product lines while maintaining a fast production rate. This position will join the team at an exciting moment, with an opportunity to directly own the quality outputs of some of our critical sub-systems • Experience in developing functional specifications, design verification plans and functional test procedures, • 7+ years as quality engineer owning performance over high precision assemblies, • Master's degree in electrical engineering, computer engineering, or equivalent, • Experience working with interdisciplinary teams to execute product design from concept to production, • Experience with the project management of technical projects, • Experience in NPI product qualification methods, including RCCA and APQP methods, • QE experience with aerospace applications Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Annapurna Labs builds custom Machine Learning accelerators that are at the forefront of AWS innovation and one of several AWS tools used for building Generative AI on AWS. The Neuron Compiler Engineering team is searching for a Senior Software Development Engineer to support the development infrastructure of a compiler to enable the world's largest ML workloads to run efficiently in the cloud. Amazon Annapurna Labs organization is responsible for silicon development at AWS. Organization covers multiple disciplines including silicon engineering, hardware design and verification, software and operations. The AWS Neuron team works to optimize the performance of complex neural net models on our custom-built AWS hardware. More specifically, the AWS Neuron team is developing a deep learning compiler stack that takes neural network descriptions created in frameworks such as TensorFlow, PyTorch, and Jax, and converts them into code suitable for execution. As a Sr. ML Compiler Engineer, you will be responsible for identifying and designing solutions that enable efficient and reliable build, test, and release mechanisms for the Neuron compiler. You will design and implement a solution for distributed execution of the Neuron compiler that will help to run customer workloads more efficiently. You will leverage your technical communications skill as a hands-on partner to AWS ML services teams, bringing new products/features to market, and many other exciting projects. Key job responsibilities Our engineers collaborate across diverse teams, projects, and environments to have a firsthand impact on our global customer base. You’ll bring a passion for innovation, data, search, analytics, and distributed systems. You’ll also: • Solve challenging technical problems, often ones not solved before, at every layer of the stack., • Design, implement, test, deploy and maintain innovative software solutions to transform service performance, durability, cost, and security., • Build high-quality, highly available, always-on products., • Research implementations that deliver the best possible experiences for customers. A day in the life As you design and code solutions to help our team drive efficiencies in software architecture, you’ll create metrics, implement automation and other improvements, and resolve the root cause of software defects. You’ll also: • Build high-impact solutions to deliver to our large customer base., • Participate in design discussions, code review, and communicate with internal and external stakeholders., • Work cross-functionally to help drive business decisions with your technical input. You will collaborate closely with a cross-functional team comprised of compiler, hardware, and ML engineers., • Work in a startup-like development environment, where you’re always working on the most important stuff., • 5+ years of non-internship professional software development experience, • 5+ years of programming with at least one software programming language experience, • 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience, • 5+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience, • Experience as a mentor, tech lead or leading an engineering team, • Master's degree in computer science or equivalent, • Experience developing compilers Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $151,300/year in our lowest geographic market up to $261,500/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Job Description Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customers satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos. Capable of performing Systems Safety Analysis Work • Prior experience in completing flight control systems fault tree work., • Familiar with CAFTA to finalize and review fault trees from supplier and merge into Fault Trees., • Flight control engineer who can perform lab hardware/software in the loop testing for 777-9., • A mix of flight controls experience engineers to work functional decomposition, general flight controls integration and control law updates., • Will support qualification report review and generation for qualification testing has performed.Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.Kronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.

Our client, a leader in the semiconductor industry, is seeking a Hardware Design & Validation Engineer – AI Semiconductor Systems to join their team. As a Hardware Design & Validation Engineer, you will be part of the AI Semiconductor Engineering team supporting the development of next-generation AI chips. The ideal candidate will have strong analytical skills, excellent communication abilities, and a detail-oriented approach which will align successfully in the organization. Job Title: Hardware Design & Validation Engineer – AI Semiconductor Systems Location: Mountain View, CA | Austin, TX | Redmond, WA | Raleigh, NC Duration: 18 Month Contract Pay Range: Not disclosed What's the Job? • Design, implement, and verify RTL blocks for AI SoCs, including image and video processing components., • Perform post-silicon and FPGA validation, including test planning, execution, and debugging., • Set up and debug PC systems and lab hardware, including root cause analysis and issue reproduction., • Conduct front-end synthesis, analyze timing results, and run CDC and lint checks., • 5–7+ years of experience in hardware design, validation, or system-level debugging., • Strong hands-on experience with hardware debugging, lab tools, and system setup., • Proficiency in C/C++, Python, Perl, and/or PowerShell for scripting and automation., • Experience with RTL design and verification, including CDC, lint, and synthesis., • Opportunity to work on cutting-edge technology in AI semiconductor systems., • Collaborative work environment with cross-functional teams., • Chance to enhance your skills in hardware design and validation., • Engagement in high-scale environments with complex SoC components. About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Apollo is Palantir's product that enables autonomous management and continuous deployment of mission critical software, wherever it is. We’re transforming the way organizations around the world deploy software, taking SAAS where SAAS has not gone before: from on-premise, to various cloud providers, to disconnected environments (air-gapped), to strict accreditation frameworks, and to the edge. As a Front End Engineer on the Apollo platform you will be responsible for the experience of thousands of users, architecting workflows and interfaces that make sophisticated deployment and monitoring tasks simple. You might spend one day interviewing users to understand their complex workflows and the next brainstorming mockups with Product Designers. Another day, you could tackle building out a workflow, partnering with backend engineers to wire up your code with the APIs, or even building out APIs yourself! We're hiring engineers who are passionate about the whole product development lifecycle — not just fixing bugs or maintaining legacy code — from idea generation, user interviews, planning, design, prototyping, execution, shipping, and iteration. Learn more about Apollo and why it was built!Core Responsibilities • Work closely with forward deployed, platform, and customer engineers to understand user workflows, product gaps and identify both short and long-term product capabilities, • Work with Product Designers to develop the overall look and design of our web application, • Develop and evolve core libraries and components used to render user interfaces, • Collaborate with Backend Engineers to define APIs that support frontend functionality, • Routinely test and debug web applications, manually and through automation, to maintain high quality and performance, • Champion a long-term tech roadmap to build high-quality app interactions, polished & reusable UX, reduce operational burden, ensure scalability, reduce risk, and strive for step-changes whenever possibleTechnologies We Use, • Core Palantir products provide the foundations for our deployments, • TypeScript and React are central to our front-end development, • GraphQL is used for data transport, • Blueprint as a re-useable frontend component library, • A combination of open-source and internal technologies that suit the problems at hand, • Industry-standard build tooling, including Gradle, Webpack, GitHub, and CircleCIWhat We Value, • Product-centric individuals who have a high sense of ownership and ability to own projects end-to-end, • Belief in the importance of UI/UX in productionizing infrastructure management systems, • Clear and concise verbal and written communications, • Demonstrated ability to work in a fast-paced product development team, with peers and teammates across multiple locations and timezones, • High engineering standards and a desire to improve both new and existing systems, • Willingness and enthusiasm to do what it takes to get things done, leading by example and deeply engaging with the team’s day-to-day work, • A focus on impact and an ability to articulate the value your work provides, • Familiarity with GraphQL and API schema designWhat We Require, • 2+ years of front end software engineering experience. Regardless of which frameworks you use or how you learned them, we’re looking for people who can write clean, effective code., • Proven track record of building impactful user interfaces, understanding how technical decisions impact users., • Proficiency with web technologies and front end programming languages such as JavaScript, TypeScript, or similar languages., • Proficiency with web technology languages such as React, JavaScript, TypeScript, or equivalent.

Job Description Job Title: Software Dev Engineer II / React native developer (backend) Location: Seattle, WA Duration: 11 Months Job Type: Contract – W2 Work Type: Onsite Note: Please do not share your resumes if you are on OPT, CPT and H1B REQUIRED SKILLS: · Strong in IOS and/or Android. · Java Script · Full stack of Native, React Native, and rendering framework on iOS and/or Android · Passion, experience, and drive for engineering and operational excellence · Ideal candidates love to dive into the details, tackle complex problems, obsess over quality and test coverage, evangelize automation and technical simplification, all while supporting and promoting app-centric innovation. · Performance Indicators/ how will · Look at how quickly they can ramp up/ self-sustaining on assignments. · The standard development metrics in terms; how many CR were successful or how many needed reworks. · Note: Client will need a distribution of candidates that between IOS and Android between the four open roles they have. · They can’t have all hires be IOS or all Android. Top 3 must-have hard skills · TypeScript, JavaScript, React Native experience · IOS or Android experience (knowledge of both is helpful) but mastering at least one of the platforms is a must. · Mobile Development (Native) Kindly please share your resumes to ‪ or ‪(707) 435-3471

Job DescriptionQA Software Engineer Job Title: QA Software Engineer (Mid & Senior level) Location: REMOTE Salary: $100k-150k/year DOE + BONUS + FULL BENEFITS Requirements: 2+ years E2E & API Test Automation, Playwrite, Coding in Python At this company, complexity isn't a barrier - it's the challenge we thrive on. We've built a platform that helps some of the world's most recognized operators make smarter decisions, faster. It's not consumer-facing, but it's mission-critical. The kind of product that quietly powers industries you rely on every day, yet few people ever see. We're a lean, product-driven team that obsesses over usability, performance, and trust. Our users don't just use our software - they depend on it to run high-stakes operations with confidence. Every feature you ship, every bug you squash, every test you automate directly improves how real businesses operate at scale. If you're excited by the idea of solving real problems for real users - and seeing your work ship regularly - this is the kind of place where your impact won't just be visible. It'll be essential. We're currently looking for a QA Software Engineer to help elevate the quality, reliability, and performance of our platform. What You'll Do • Build and maintain API and E2E test automation using tools like Playwright or Cypress, • Develop infrastructure for performance, security, and accessibility testing, • Manually test features and coordinate bug bashes to cover automation gaps, • Collaborate on feature design, propose acceptance criteria, and validate new functionality, • Investigate customer-reported issues and contribute to long-term product stability, • Analyze telemetry and APM metrics to improve user experience and system performance What You Bring • 2+ years of experience in end-to-end & API test automation using Playwright, • Hands-on coding in Python (not just scripting!), • Experience building QA infrastructure: test environments, performance/security tooling, telemetry/reporting, • Passion for breaking things and testing complex web applications, • Willingness to perform manual testing when needed Bonus Skills: • Javascript, C#, • WebGL, • Experience testing complex web applications, • Experience with performance, security, or accessibility testing, • Experience developing QA-related telemetry and reporting tools Benefits • Competitive Compensation ($100k-150k + BONUS), • Remote and Flexible Work Environment: Work from anywhere with flexible hours. The team values outcomes over online presence., • Company-paid medical, dental, and vision insurance, • 20 paid vacation days, 5 sick days, and 11 company holidays each year, • 401(k) plan with match, • Profit-sharing program, • Health Savings Account (HSA) with company contributions, • Monthly internet and mobile phone reimbursement, • Weekly DoorDash stipend and DashPass membership, • Travel discounts, • Wellness program focused on physical and mental health, • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/23/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Company Overview: Starcloud is building a network of data centers in space, starting at kilowatts and scaling to gigawatt capacity. Falling launch costs allow us to take advantage of the abundant energy, radiative cooling techniques, and ability to rapidly scale in space. Join our team, push the boundaries of the space economy, and be part of this pioneering effort to redefine the future of energy. Position Overview: As a Power Electronics Engineer at Starcloud, you will play a critical role in designing and optimizing advanced power electronics systems for our space-based data centers. This dynamic and challenging position demands a highly skilled and innovative individual with deep expertise in power generation and converter development. You will work on a wide range of applications, from low voltage to high kV, powering a range of distinct systems. Key Responsibilities: • Design and Development:, • Lead the design, analysis, and testing of DC-DC power converters tailored for harsh space environments., • Conduct electrical power system and sub-system level design trades and develop comprehensive requirements., • Define and perform rigorous electrical power system verification testing and analysis., • Collaborate with multidisciplinary teams of design, test, and production engineers to create groundbreaking power electronics hardware., • Optimization and Analysis:, • Develop and optimize designs for power conversion systems, ensuring peak efficiency, reliability, and cost-effectiveness., • Address and resolve EMI/EMC challenges in power adaptors to ensure compliance with stringent regulatory standards., • Perform advanced modeling, simulation, and testing of power electronics to validate and refine designs., • System Integration and Support:, • Lead schematic capture and PCB layout design, ensuring robustness, manufacturability, and compliance with design specifications., • Oversee board bring-up, execute comprehensive test campaigns, and propose effective solutions to design challenges., • Develop efficiency, mass, and cost models for power electronics designs, exploring and implementing various topologies to enhance performance.Basic Qualifications:, • Bachelor's degree in Electrical Engineering, Computer Engineering, Physics, or a related STEM discipline., • Minimum of 1 year of professional experience in power converter development.Preferred Qualifications:, • Master's or PhD degree in Electrical Engineering or a related field., • Strong expertise in analog control and discrete logic design., • Extensive experience in modeling, simulation, and testing of power electronics., • Proficient in voltage and current mode control and compensation design., • Strong understanding of DC-DC topologies, with the ability to select optimal architectures and components., • Familiarity with failure mode effects and criticality analysis., • Experience designing wire wound and planar inductors and transformers., • Proficiency in power supply testing and packaging for harsh environments., • Familiarity with spacecraft electrical power systems and knowledge of radiation effects., • Experience designing and working with solar arrays as input power sources., • Power Electronics Engineer/Level I: $100,000 - $120,000 per year, • Power Electronics Engineer/Level II: $115,000 - $150,000 per year, • Potential for stock options, discretionary bonuses, and other long-term incentives., • Comprehensive medical, vision, and dental coverage., • 401(k) retirement plan with company match., • Short and long-term disability insurance, life insurance, and paid parental leave., • Generous paid vacation, holidays, and sick leave. Additional Requirements: • Willingness to work extended hours and weekends as necessary to support critical project milestones. We receive many applications, and so we apologize that we may not be able to respond to every applicant.

Job Description Hiring Manager notes: • Design verification engineer-, • Good experience is required - Work independently, • 5+ years required - No entry level, • Bacholors MUST, • Board- Board level testing - Expert (Power, • How the interface are working, • How to create a test plan / work with existing one / Test report (Detailed test report is required), • Electronic equipment exp must- Oscilscoppes, analyzers, Etc..,, • Strong debugging skills, • Ex: there is a board and failure and there are power regulators and the person see why the reggulators are not coming out, • High speed interfaces expereience MUST, • The Design Verification Engineer will be a member of the Avionics team, focusing on the design verification of the various electrical functions of high-performance communication systems., • They will focus on PCB Assembly design verification and will be taking designs from subsystem testing and initial build, through functional testing and system performance validation., • They will lead a variety of tasks such as board level bring-up and test for newly designed PCBA., • They will write and execute design verification plans for power and signal integrity verification for standard and custom communication interfaces between Integrated circuits and circuit boards., • They will ensure proper data collection, reviews, and demonstrate the system requirement verification. Basic qualifications • Bachelor’s degree in Electrical Engineering, Computer Science or related field, • 5+ years of experience in board level design verification for aerospace, automotive, or consumer electronics products, • 5+ years’ experience developing requirements, plans, and procedures for product design verification., • 5+ years’ experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.), • Solid understanding of EE and test fundamentals, • Strong debugging/troubleshooting skills, • 5+ years’ Experience in design verification of high-speed interfaces, signal integrity and protocol compliance, • Ability to coordinate between engineering, test lab, and technicians and schedule testing resources, • Experience in test plans and protocols related to established Space Hardware test processes (GEVS / SMC-S-016), • Knowledge of hardware and software tools for test automation (e.g. NI, dSPACE, Python, C/C++, Labview, etc.), • Experience with power supplies, IMUs, FPGAs, sensors, RF, and high-speed electrical signal characterization, • Experience with design or test of circuit boards with complex microcontrollers, system-on-chip (SOCs), or FPGAs, • Experience with design or test of communication busses, switching power supplies, electric motors, IMUs, sensors, RF, and high-speed electrical signal characterization, • Experience with development of automated test systems, • Experience with incoming calibration checks and developing calibration procedures, • Years of Experience: 5 Years, • Degree or Certification: Bachelor’s degree in Electrical Engineering, Computer Science or related field, • Experience design verification for aerospace, automotive, or consumer electronics products, • EE and test fundamentals,, • Strong debugging/troubleshooting skill

Job Description Company Overview: Starcloud is building a network of data centers in space, starting at kilowatts and scaling to gigawatt capacity. Falling launch costs allow us to take advantage of the abundant energy, radiative cooling techniques, and ability to rapidly scale in space. Join our team, push the boundaries of the space economy, and be part of this pioneering effort to redefine the future of energy. Position Overview: As a Mechanical Engineer at Starcloud, you will be at the heart of designing, developing, and testing hardware for our space-based data centers. You will own the full lifecycle of mechanical systems, from concept to orbital operation, working closely with senior leadership and multidisciplinary teams to rapidly and iteratively deliver hardware. Key Responsibilities: • Design and Development:, • Spearhead the development of structures for our spacecraft and payload, from concept design to production., • Create and manage detailed CAD models from component to spacecraft level., • Perform structural and thermal analysis using FEA and hand calculations to ensure our hardware performs during launch and in-orbit operations., • Project Management:, • Own the lifecycle of mechanical components, iteratively driving projects from initial concept through to manufacturing, testing, and deployment., • Collaborate on system-level requirements and design criteria to develop holistic DFM strategies that optimize for manufacturability, cost, and reliability., • Ensure timely project delivery with high standards of quality and performance through pragmatic project management., • Testing and Validation:, • Design and execute comprehensive test plans to validate designs under launch and space environments ., • Perform rigorous environmental and performance testing to demonstrate compliance with requirements., • Production and Integration:, • Partner with supply chain and manufacturing teams to establish efficient, space-qualified production processes., • Optimize designs for ease of integration and production., • Collaborate with vendors to ensure the flawless delivery and integration of mechanical components.Basic Qualifications:, • Bachelor's degree in Mechanical Engineering or a related field., • Proficiency with advanced CAD software, ideally NX and teamcenter., • Experience with FEA software for high-fidelity structural analysis, ideally Ansys., • Minimum of 2+ years of hands-on experience in mechanical design, analysis, testing, and/or manufacturing., • Strong understanding and application of GD&T principles.Preferred Qualifications:, • Master's degree in Mechanical Engineering or a related technical discipline., • 3+ years of professional experience in mechanical design and analysis in the space sector, • Expertise in materials selection, advanced manufacturing methods, and surface treatments for space applications., • Proficiency in programming languages (e.g., Python, MATLAB) for automation and data analysis., • Experience with PCB design and PCBA mechanical integration., • Associate Mechanical Engineer: $100,000 - $115,000 per year, • Mechanical Engineer: $110,000 - $140,000 per year, • Senior Mechanical Engineer: Competitive, • Potential for stock options, discretionary bonuses, and other long-term incentives., • Comprehensive medical, vision, and dental coverage., • 401(k) retirement plan with company match., • Short and long-term disability insurance, life insurance, and paid parental leave., • Generous paid vacation, holidays, and sick leave. Additional Requirements: • Willingness to work extended hours and weekends as necessary to support critical project milestones. We receive many applications, and so we apologize that we may not be able to respond to every applicant.

Job DescriptionWe are seeking a hands-on and detail-oriented eCommerce QA Engineer with deep experience across the Order-to-Cash (O2C) lifecycle. This role demands more than textbook testing — we need professionals who can think like end-users, understand real-world business flows, and validate every step of the customer journey, from catalog and cart to checkout, payments, invoicing, and revenue recognition. You will be responsible for ensuring the integrity, accuracy, and quality of complex transactional processes that power large-scale eCommerce platforms.Key Responsibilities • Design and execute end-to-end test strategies spanning the full Order-to-Cash flow:, • Product catalog, search, and pricing validation, • Shopping cart and checkout functionality, • Order placement, payment, and fulfillment, • Invoicing, taxation, refunds, and financial reconciliation, • Perform hands-on functional, integration, regression, and E2E testing across web, mobile, and backend systems., • Validate order orchestration, payment gateways, ERP/Billing integrations, and downstream O2C components., • Analyze complex business rules and design test cases that mirror real-world eCommerce and financial transactions., • Collaborate closely with Product, Engineering, Finance, and UAT teams to ensure accuracy across all stages of the customer and revenue lifecycle., • Identify and troubleshoot defects, documenting clear reproduction steps and root causes., • Apply innovative and practical test approaches, focusing on business impact and customer experience beyond standard QA checklists., • Support automation efforts and continuous testing initiatives across O2C modules.Required Skills & Experience, • 5+ years of experience in QA/testing with end-to-end eCommerce and Order-to-Cash process coverage., • Strong functional knowledge across:, • Catalog and pricing management, • Cart and checkout flows, • Payment processing and transaction validation, • Order management, fulfillment, and invoicing, • Credit, refunds, and financial postings, • Experience testing integrations with payment gateways, billing systems, and ERP platforms (e.g., Oracle BRM, SAP, NetSuite)., • Ability to analyze business workflows and validate data across multiple systems (front-end, API, and backend)., • Strong understanding of data validation, API testing, and transaction flow verification., • Familiarity with JIRA, TestRail, SQL, Postman, and automation frameworks (Selenium, Cypress, or similar)., • Excellent communication skills — able to explain test design and rationale clearly beyond standard QA procedures.Preferred Qualifications, • Experience in enterprise-scale eCommerce or subscription-based platforms (e.g., Amazon, Walmart, Flipkart)., • Exposure to financial testing and O2C reconciliation across systems., • Prior experience validating taxation, invoicing, discounts, and revenue recognition logic., • Understanding of Agile and CI/CD pipelines with hands-on collaboration in sprint testing cycles.Why Join Us, • Be part of a team ensuring the end-to-end integrity of the eCommerce and financial ecosystem., • Work on mission-critical Order-to-Cash processes that directly impact business revenue., • Collaborate with world-class engineers and business teams on global-scale projects., • Grow in a culture that values ownership, innovation, and deep domain expertise. Powered by JazzHR isXlCIBBI9

Job DescriptionElectronics Engineer ISigma Design is a product development, engineering, and manufacturing firm. Based out of the Pacific Northwest, we offer innovative concept through production services to diverse clients around the globe. Sigma Design believes in hiring, developing, and recognizing the best. We offer competitive compensation, a 401(k) with up to 4% company match, quarterly bonus program, 15-days of accrued PTO and 9 company paid holidays. In addition, Sigma Design has multiple options for medical insurance and dental insurance. We also offer voluntary benefits: vision, long-term disability, and life insurance. Position Details: • This position will be In-Office Essential Job Functions - Responsibilities: • Assist with schematic capture and PCB layout under direction, • Contribute to requirements gathering and documentation, • Participate in design reviews and incorporate feedback, • Support test execution and data documentation, • Learn and apply departmental standards and design processes, • Collaborate with cross-functional teams and communicate effectively, • Bachelors Degree in Electrical Engineering or equivalent preferred, • 0-2 of Years of Experience of relevant work experience preferred, • Strong written and verbal English language communication skills, • Excellent teamwork/interpersonal skills and the ability to communicate effectively, • Demonstrated ability to work collaboratively, both within and outside one's own work group, • Demonstrate commitment and adherence to Sigma Design Core Values SigmaDesign is an Equal Opportunity Employer Powered by JazzHR HjJglMzvCt

Job Description About the CompanyThis company was founded to enable a future with affordable, reliable, and clean energy. By making fusion energy a reality, they are enabling a step change in the future of energy generation. They differentiate from other companies by rapidly building, testing, and iterating on their designs, not just theorizing and modeling. Their prototypes are doing fusion every day! Building the world's first energy producing fusion generators requires a creative and diverse team of engineers, scientists, and builders. If you are passionate about solving one of the world's most pressing challenges, this opportunity is for you. This is a direct hire, permanent placement position for a client of AdAstra Talent Advisors.About the RoleOur Client is seeking a Senior Electrical Engineer to support the core energy management system for their fusion generators. You will support various electrical energy management systems including energy delivery for the magnetics, fusion energy recovery, re-distribution network, as well as AC grid-tie networks. You will report directly to the Senior Manager of Electrical Engineering in their Seattle area office.Responsibilities • Design, test, troubleshoot, and support operation of high voltage electrical power systems for driving pulsed magnetic coils, • Oversee design, procurement, construction, and commissioning of high-power electrical systems to drive pulsed coils (<1ms) at currents up to 5MA and voltages up to 40 kV, • Develop electrical system architecture and work with designers to produce electrical schematics and installation drawings, • Develop and vet cost-effective, scalable, and reliable design solutions via technical peer review through a design review process for each major design project, • Collaborate with operators of generator power systems through machine commissioning and, for development machines, through the lifetime of the machine with an eye for optimization of future generators, • Demonstrate rigorous engineering practices including management of cost, schedule, and resource estimates as they pertain to your design, build, and delivery timelines, • Mentor and support engineering growth of other team members on the electrical engineering team as well as other technical teamsRequirements, • 8+ years experience in power electronics, solving complex electrical engineering problems from design to delivery, • Strong background with solid state switching technologies and understanding of operating characteristics of power electronic components such as IGBTs, power MOSFETs, and SCRs, • Technical expertise in the application of engineering concepts, principles, codes, and theory, and practice with the ability to coordinate workloads to meet established deadlines or milestones with some experience in project leadership, • Advanced in electronic troubleshooting systems using standard benchtop tools such as oscilloscopes, Eloads, pulse generators, spectrum analyzers, and PCB design software, • Experience with Microsoft Suite, LTSpice, SIMtrex/Simplis, Altium, MatlabLogistical Requirements, • This role will be located in the greater Seattle, WA area, • The role involves working around high energy electrical systems and in areas containing high magnetic fields. Safety is the utmost priority with our client and the candidate must be willing and able to work safely in these environments.ITAR Requirement, • To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Compensation, • The base salary range for this position is $170,000–$190,000, depending on experience and qualifications., • Our client's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation., • This is an exempt salaried role.In addition to base salary, you may also be eligible for:, • Medical, Dental, and Vision plans for employees and their families, • 31 Days of PTO (21 vacation days and 10 sick days), • 10 Paid holidays, plus company-wide winter break, • Up to 5% employer 401(k) match, • Short term disability, long term disability, and life insurance, • Paid parental leave and support (up to 16 weeks)

Job Description Akkodis is seeking a Full Stack Engineer for a Contract job with a client in North Seattle, WA. Ideally looking for applicants with experience in single-page web application development and a strong passion for product development and user experience. Rate Range: $63.43/hour to $67.16/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Full Stack Engineer job responsibilities include: * Develop single-page web applications using JavaScript, React, Redux, and NodeJS. * Assist in migrating web deliverables to a modern CSS library. * Build responsive/adaptive web apps with progressive enhancement. * Develop and maintain RESTful APIs. * Collaborate with cross-functional teams to deliver high-quality user experiences. Desired Qualifications: * Bachelor’s Degree. * 2–3 years of experience in full stack web development. * Expertise in JavaScript, React, Redux, NodeJS, and CSS/SASS. * Experience with TypeScript and MongoDB. * Strong understanding of responsive design and modern web standards. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at Pay Details: $63.43 to $67.16 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description Company Founded in 2018 by CPAs, tax attorneys, and software developers, Taxbit is creating an entirely new category to enable widespread compliant adoption of digital assets for the global economy. Taxbit's Software-as-a-Service (SaaS) platform streamlines and automates customers' tax reporting and accounting activities for digital assets. Trusted by leading crypto, tech, and traditional enterprises, Big 4 accounting firms, and government agencies (including the IRS), Taxbit solves compliance challenges at scale amidst an ever-evolving regulatory landscape. Taxbit is backed by leading Silicon Valley VCs with teams located in New York City, San Francisco, Seattle, Salt Lake City, and Europe. Opportunity for Impact We are seeking a Product leader to drive the global product strategy for our entire suite of enterprise and government solutions. This critical role reports into the CTO and is a valued member of the Senior Leadership Team. You will inherit a platform and multiple products that address tax and accounting compliance challenges in the Digital Asset and Fintech landscape. You are expected to shape the future of our products and platform, enabling our next stage of growth into both commercial and government markets. You will be the bridge between our ambitious company vision and the tangible products our customers love and rely on. You will lead a talented team of product managers, fostering a world-class product culture rooted in customer empathy, data, transparency, and deep collaboration. This role requires a unique blend of market intuition, strategic thinking, technical savvy, and inspirational leadership. You will work hand-in-hand with Go-to-Market (GTM) leaders, our esteemed Subject Matter Experts (SMEs), and Engineering to build and deliver solutions that dominate the market. Role and Responsibilities • Product Vision & Strategy: Translate the overall company vision into a compelling and coherent product vision, along with a multi-year product strategy that aligns with the company's objectives. Clearly articulate and evangelize this strategy across the organization, to the executive team, and the board., • AI Transformation: Imagine and test innovative AI-based solutions to both existing and new challenges. Develop strategy and roadmap to navigate the rapidly accelerating AI landscape and make informed investment choices that deliver real value to customers., • Roadmap & Execution: Own the end-to-end product roadmap, from ideation to launch and iteration. Implement a robust process for prioritizing initiatives based on customer value, business impact, and strategic importance. Ensure the annual and quarterly roadmaps align with strategic goals and revenue targets., • Leadership & Culture: Lead, mentor, and grow a world-class team of product managers and product designers. Champion a culture of customer empathy, data-informed decision-making, continuous learning, and radical transparency. Foster an environment where the team feels empowered, accountable, and collaborative., • Cross-Functional Collaboration:, • Act as the primary liaison for our extensive bench of Subject Matter Experts (SMEs) in tax and accounting, ensuring their invaluable domain knowledge is seamlessly integrated into the product development process., • Partner closely with Engineering leadership to ensure a healthy, efficient, and predictable product development lifecycle., • Collaborate with Go-to-Market (GTM) teams (Sales, Partnerships, Marketing, Customer Success) to define product positioning, messaging, pricing, and launch plans., • Market & Customer Intelligence: Become a company expert on our customers, the competitive landscape, and market trends. Drive a continuous feedback loop through customer interviews, user data analysis, and market research to uncover unmet needs and new opportunities., • Experience: 15+ years in product management, with at least 5 years in a senior leadership role (e.g., Director, VP) managing a team of product managers. Experience scaling a product organization at a high-growth, global company., • SaaS Expertise: Proven experience in an Enterprise B2B or B2G (Business-to-Government) SaaS environment, with a deep understanding of SaaS business models, metrics, and growth levers., • FinTech/RegTech: Significant experience in the tax, accounting, FinTech, or RegTech (Regulatory Technology) industries., • AI / ML / Data Science: Experience launching AI/ML features in products and leveraging with internal operations., • Strategic Mindset: Demonstrated ability to develop and execute a successful product strategy for a complex, global product portfolio., • Leadership & Mentorship: A track record of hiring, developing, and retaining top-tier product talent. You lead by example and inspire your team to do their best work., • Data-Driven: An analytical and quantitative mindset. You are comfortable using data to drive strategic decisions and to persuade others., • Crypto Native: Deep understanding of the cryptocurrency space, underlying technology, its nuances, and its potential applications beyond just the basic functionalities to help ensure our products are not only user-friendly but also secure, compliant, and innovative., • Government Experience: Proven experience with products sold to government entities, and an understanding of public sector procurement cycles and requirements. Benefits & Perks: • Competitive cash compensation (based on experience), • Equity (RSUs), • Competitive benefits package, • A modern 401(k) plan that includes access to crypto, financial wellness benefits, low fees and more, • Hybrid working model: 3 days in-office, 2 days WFH/flexible, • Monday team lunches, snacks and drinks, • Discretionary Time Off - enjoy the flexibility to rest, refuel, and recharge, • Paid parental leave to bond with your child, • Fertility Benefit Corp Press Forbes America's Best Startup Employers Deloitte Top 10 Fast 500 Award Forbes FinTech 50 Recent Product Announcements Taxbit Announces AI Enabled Rules Engine for Crypto Accounting Taxbit Launches DAC7 Compliance Solution for Digital Marketplaces Taxbit Introduces The First Enterprise-Grade Legal Entity Support Solution for Digital Assets Taxbit Launches Innovative CESOP Reporting Solution for Digital Assets TB Thought-Leadership Pieces Fortune - Future of Finance NASDAQ - How Regulation and Technology Are Bridging the Gap Between Tradfi and Crypto Future of Finance Roundtable Event (Video) Coindesk - The Tax Implications of Sam Bankman-Fried's Conviction Fox Business - AI tools streamlining accounting workflows and opening capacity for innovation Bloomberg Tax - Is Anyone Paying State Taxes on Bitcoin and NFTs? (Podcast) Alliance/ Partner Announcements IRS Taps TaxBit to Audit Bulk Crypto Transactions EY to Collaborate With TaxBit on Digital Asset Tax Reporting TaxBit and KPMG LLP Announce Alliance to Assist Digital Asset Companies Amid Market and Regulatory Uncertainty Deloitte and TaxBit Form Alliance to Meet Exponential Market Demand for Digital Asset Disclaimers • By submitting an application for this role, you certify that the information contained in the application is correct to the best of your knowledge. You understand that to falsify information is grounds for refusing to hire you, or for discharge should you be hired., • Employment with the Company is at will unless otherwise stated in a written agreement signed by the CEO of the Company. This means that either the Company or the employee can terminate the employment at any time and for any reason, with or without notice.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Sr. Electrical Engineer, PCB Design at Carbon Robotics, you will design the circuit boards that power our revolutionary products. You'll create everything from high-reliability embedded control boards to power electronics that operate in harsh agricultural environments. From rapid prototyping to optimizing for high-volume manufacturing, you'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Design PCBs for diverse applications including laser control systems, motor drives, power distribution, control panels, vehicle ECUs, and sensor interfaces, • Create high-speed digital boards for embedded computing, image processing, and real-time control systems, • Develop power electronics PCBs handling high currents for motor control and power distribution, • Design mixed-signal boards integrating precision analog, digital processing, and power management, • Optimize PCB layouts for EMI/EMC compliance, thermal management, and automotive reliability standards, • Implement design for manufacturing (DFM) and design for test (DFT) strategies across product lines, • Collaborate with firmware teams on microcontroller selection, memory architecture, and peripheral interfaces, • 8-15 years experience in PCB design for embedded systems and power electronics, • Expert proficiency in Altium Designer (v18+) including multi-board projects and multi layer designs as well as analytical design optimization tools, • Proficiency in embedded systems including microcontrollers, FPGAs, and communication interfaces, • Significant experience with power electronics layout including thermal management and high-current routing, • Experience with high-speed digital design (DDR interfaces, differential pairs, impedance control), • Previous experience developing PCBs for agricultural/automotive/aerospace applications that meet strict environmental (vibration, temperature, high humidity, EMC) and regulatory requirements., • Understanding of manufacturing processes, component selection, and cost optimization, • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job DescriptionWe are Fresh. Together let’s build the future. With partners and clients, we practice strategy, design, development, and engineering to harness the power of technology and create what's next. Our cross-disciplinary approach blends human ingenuity and technology, empowering us to meet uncertainty with confidence. What got us to today won’t get us to tomorrow, so we test our assumptions and always strive for growth. From the products we build to the partners we collaborate with, we believe people make the difference. And we do so as a workforce representative of the communities we serve, understanding that a diverse workforce strengthens our organization. We value diversity and support a positive and welcoming environment where all of our employees can thrive. Why join Fresh? Fresh Consulting is a fast-paced, design-led, software development and hardware engineering company, offering end-to-end services to help companies innovate. We bring together amazing UX Designers, sophisticated developers, digital strategists, and top-notch engineers to help companies create fresh experiences that connect humans, systems, and machines. We've been growing fast and need someone to help us continue to manage the delivery of high quality work in a fast-paced environment. See more at freshconsulting.com. What we need: In this role, you will combine your passion and enthusiasm for robotics, open-source software and hardware technologies. You will work alongside Fresh customers and partners to build solutions, identify industry wide technical trends and help guide strategic technical decision making for the Fresh robotics team. The Fresh Consulting hardware and robotics team is working with customers to build and deploy fleets of robots into the field. Join us and help to build new state of the art software for both robots and the hardware backends that support them. We are now looking for a Software Engineer with a focus in computer vision and machine learning pipelines. They will also be responsible for developing and maintaining software solutions, integrating with sensors and componentry, and implementing integrations that meet our customers' needs. If you have a solid background in software engineering, are familiar with Python/C++, and want to be part of a fast-paced and exciting team, we’d love to chat! Daily Responsibilities • Contribute to system design by converting business needs into robust architectures and achievable solutions., • Develop modular, reusable software in Python to automate processes and tests, • Interfacing with sensors, actuators, componentry using Python/C++, • Develop software for integration with internal back-end systems, • Executing robotics software for test automation in linux environments, • BSc in Computer Science, Engineering or relevant field, • Experience as a Software Engineer or similar software engineering role, • Proficient with git and git workflows, • Strong skills in prototyping, debugging, performance optimization, and unit testing, • Proficient with Linux command line and shell scripting, • Good knowledge of Python and/or C++ project packaging and deployment, • Collaborative in an interdisciplinary team environment, • Creative approach to problem solving, analytical skills and engineering fundamentals, • Some knowledge of robotics or hardware/software development process, • Familiarity with SLAM, Path Planning, Optimization, 3D-geometry, controls & dynamics is a plus, • Familiar with containerization technologies such as Docker, • Experience with Confluence/Jira, • Software engineering experience Equal employment opportunity: All qualified persons will be considered for employment without regard to race, color, religion, sex, national origin, age, marital status, familial status, gender identity, sexual orientation, disability for which a reasonable accommodation can be made or any other status protected by law. Assistance will be gladly provided upon request for any applicant with sensory or non-sensory disabilities. *Fresh Consulting is an E-Verify participating company See Fresh in action Powered by JazzHR 1yEzo7VpXU

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We're looking for a Sr. Staff Product Applications Engineer to join our Product Applications Engineering team, which focuses on Reader ICs, Readers, Systems, and Embedded Applications. Our mission is to help customers and partners successfully design and deploy IoT solutions using our next-generation reader chip products, embedding RAIN RFID connectivity into a wide range of devices and platforms. In this role, you'll serve as a technical expert across embedded firmware, software, and system-level applications related to RAIN RFID. You'll work directly with industry-leading customers and partners, providing hands-on technical consultation and shaping tools, documentation, and product roadmaps that accelerate adoption. By bridging IC-level enablement with Reader/Systems-level integration, you'll play a critical role in scaling our ecosystem in the rapidly growing IoT space. What You Will Do: • Collaborate with sales, product management, and engineering teams to secure design wins and drive adoption with customers and partners, • Support and enable our customers and partners in prototyping and productizing embedded and system-level applications, including performance optimization, calibration, functional test, and regional certification, • Analyze, debug, and optimize Reader IC applications in lab and prototype environments by applying core electrical and RF engineering principles, including antenna behavior, link budgets, impedance matching, power management, and timing analysis, • Conduct hands-on lab work, including hardware/software bring-up, debugging, performance measurements, data analysis, and validation of new features and fixes, • Create software, scripts, and prototypes to demonstrate product capabilities, and maintain clear, high quality technical documentation for internal and external audiences, • Act as a technical expert on embedded firmware/software, Reader ICs, and system-level applications, providing design guidance and implementation support, • Deliver training and enablement for customers, partners, and internal technical staff on product features, capabilities, and best practices, • Represent the voice of customer (VoC) to Product Management and Engineering, sharing field insights to influence product features, tools, and collateral, • Champion our technology at industry events and partner engagements through demos, proof-of-concepts, and technical presentationsWhat You Will Bring:, • Bachelor's degree in Electrical Engineering or Computer Engineering or Computer Science, or a related technical field, • 12+ years of experience in product application engineering, embedded system design, and customer-facing technical support, preferably in RF, IoT, or embedded domains, • Strong track record of delivering impactful results in customer-facing technical roles, • Proficiency in writing and debugging embedded firmware in C/C++ on microcontrollers (MCUs) and application processors, • Experience with interpreted languages such as Python or JavaScript for automation, scripting, and lab tools, • Solid understanding of RF communications fundamentals (link budgets, antennas, propagation, power management); direct experience with RAIN RFID is a plus, • Hands-on experience with embedded debug equipment (oscilloscopes, logic/protocol analyzers) and RF test equipment (power meters, spectrum analyzers, vector network analyzers), • Ability to apply EE and RF fundamentals in analyzing, debugging, and optimizing Reader IC and embedded applications, • Demonstrated ability to take initiative and drive technical outcomes independently, while effectively collaborating across teams to solve complex challenges, • Excellent communication skills with the ability to present technical concepts and results to diverse audiences The typical base pay range for this role across the US is $141,800 - $212,700. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Senior Electrical Engineer at Carbon Robotics, you will be a key part of the team that designs and lays out electrical power distribution systems, PCBs, control systems, and more. Not only will you architect and do detailed designs for the systems you own but you will also test and support them through production and post sales. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Design and integrate complete electrical systems including PCBs, control panels, power distribution, and wiring harnesses for revolutionary products, • Lead trade studies and define electrical system architectures, taking into consideration a wide variety of stakeholders, for electrical systems spanning embedded systems, industrial controls, and power systems., • Own systems from cradle to grave including component level and integrated testing, introduction to production, and post sale support., • Design and validate a variety of high and low voltage systems including 240V AC 3-phase power distribution systems and 24V DC control circuits, • Create system schematics, PCB layouts, industrial panel designs, and harness routing documentation using CAD and analytical modeling tools, • Partner with mechanical and software teams to ensure seamless integration of electrical subsystems into production hardware, • Drive technical decisions through project planning, task delegation, and cross-functional problem solving, • Support contract manufacturers and provide technical guidance for production of electrical assemblies, • 8-15 years experience designing complex electrical systems spanning embedded, power, and industrial applications, • Proficiency in Altium (v18+) for PCB design and Capital Harness or similar for wiring design, • Experience with high and low voltage systems, industrial controls, and safety systems (per SAE, ISO, IPC standards), • Strong background in both digital (microcontrollers, high-speed signals) and analog/power electronics, • Extensive experience designing for harsh outdoor environments and protecting against mechanical, thermal, corrosion and ESD damage., • Experience with SOLIDWORKS Electrical and mechanical integration workflows, • Hands-on hardware debugging skills and experience with automated test equipment design, • Knowledge of PLCs, industrial communication protocols, and sensor integration, • Experience managing electrical aspects of projects through contract manufacturing, • Past experience developing electrical systems for automotive, agricultural, or aerospace vehicles is highly desired. Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor/RF hardware Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Complete test programs throughout all phases of the design process, • Implement test plans, specifications, and procedures in accordance with quality assurance program requirements, • Release test programs and hardware on the ATE (Automated Testing Equipment) for characterization and production testing of silicon devices, • Update and optimize silicon test programs from test requirement documentation, • Purchase ATE hardware for NPI and production, including Load Board, probe card, and interface, • Analyze large data sets using JMP, SQL, Matlab and review results with test and design engineering teams, • Qualify new test hardware and software for release in a production environment, • Contribute to cost reduction efforts such as yield improvement, test time reduction, and test elimination, • Collaborate with Impinj's overseas teams to transfer products into high-volume testing, • Investigate production yield issues and product returns to determine root cause and implement corrective actionsWhat You Will Bring:, • Bachelor's degree in electrical engineering, computer engineering, or similar discipline with 5+ years of experience, • Product engineering experience with familiarity in ATE coverage, margin, and binning, • Direct experience with wafer or die ATE testing, NI/Emerson TestStand, and Semiconductor Test System (STS) is preferred, • The ability to perform conducted RF measurements including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, and group delay, • Strong analytical, planning, and organizational skills The typical base pay range for this role across the US is $111,200 - $166,800. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Senior Mechanical Engineer at Carbon Robotics you will play a key role in developing new mechanical and structural robotic systems that will radically change how our customers do business. You will immediately bring your significant experience architecting, designing, analysing, prototyping, producing, and supporting new products to multiple cornerstone programs currently under development. As part of a growing Mechanical Engineering team you'll help mentor and grow more junior engineers to help ensure the whole team succeeds. This role can be based in our Seattle or Everett office. What you'll do: • Work on a fast-paced, multi-disciplinary team to ensure the successful development, deployment, and sustainment of multiple revolutionary robotics products., • Architect, design, analyze, test, and support robot/vehicle primary structures, electronics enclosures, complex actuated systems, and life safety critical sensor installations., • Support, and at times lead, component and system level qualification test design and execution., • Lead initial production builds with the manufacturing team at our Richland, Washington facility., • Meeting our customers where they are, in farms and fields across the country, ensuring your designs will and do meet their needs, • Own Standards and Compliance scoping and documentation for the products you design. Knowledge, Skills, and Abilities for Success:, • 8 to 15 years experience designing, testing, producing and supporting complex mechanical and structural parts, assemblies, and systems in the automotive, agricultural, aerospace, or equivalent markets., • High level of proficiency in the use of CAD and Analytical tools (Solidworks and Ansys Mechanical)., • Extensive experience designing and producing most or all of the following; sheet metal, bar stock, welded, machined, thermoplastic and composite parts., • Extensive experience designing for harsh outdoor environments to protect against water ingress, rust, corrosion, and shock/vibe damage., • Demonstrated ability to quickly prototype, troubleshoot, and iterate designs with both deep ownership and team collaboration., • Demonstrated ability to work with direct and matrixed management to achieve timely objectives., • Highly desired to have past experience working with component vendors to find acceptable COTS components when possible, while also being able to lead Build to Spec and Build to Print vendors., • Highly desired to have past experience designing to SAE, DOT, and other applicable standards/codes., • Highly desired to have past experience as a Responsible Engineer, Project Engineer, Technical Program Manager, or similar., • Highly desired to have past experience working with a test engineering organization to set up, operate, and analyze results from shock/vibe and structural testing., • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity – paying employees equitably for similar work. Offers are dependent on someone experience and may be outside of the published range when appropriate. If your skills are above the posted range... Apply! We want to hear from you! Carbon Robotics' base salary pay range:$150,000—$195,000 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Overview Impinj is seeking a Staff Platform Systems Engineer to join our Platform Engineering team. In this role, you will work closely with an internal interdisciplinary team to research, develop and test innovative RFID readers and use case algorithms that form the building blocks of Impinj's RFID Solutions. Working side-by-side with Platform Firmware, Software, Hardware and Test teams, you will design, develop and test the computation layers and algorithms that are the foundation of the integrated platform that drive all our RFID Solutions. Our platform of tags, readers, on-reader software and cloud software is what allows us to give a digital identity and complete traceability to billions of everyday items. If you have a passion for using technology to dramatically change the way companies manage and operate their business, this is the role for you. What you will do: • Leverage your communication systems and signal and data processing experience to research and develop RFID solution systems and algorithms to address the most challenging RFID use cases., • Pioneer new RFID applications leveraging such algorithms to help customers solve real world problems across different use cases and industries., • Partner with members of our platform system, software, and hardware teams to design and test innovative new RFID reader and gateway solutions., • Collaborate with enterprise customers and outside partners to develop and deploy novel RFID solutions based on the Impinj platform., • Create proof of concept demonstrations for customers to show potential uses of our RFID platform., • Help pioneer RFID uses and applications of our platform in ways which have yet to be imagined., • Dive deep into large-scale data to assess performance, building models of system behaviors, scaling into algorithmic and machine learning applications., • Leverage the insights derived from data coming from enterprise customer deployments to assess and improve system performance and build system behavior models., • Operate with a hybrid working environment with a few days of the week spent at our Lab in North Beacon Hill and/or our office in South Lake Union with the rest of the time working from home.What you will bring:, • Bachelor's degree in electrical engineering, computer science or equivalent, • 8+ years of experience working in related fields., • Strong understanding of communication systems, basic algorithms, and signal processing, both in theory and in practical applications., • Proficient in programming using Matlab, Python, or C/C++, • Proficient using standard test and measurement equipment including spectrum analyzers, power meters, logic analyzers, and oscilloscopes., • Experience in at least one object-oriented programming language such as C, C++, or Java., • Comfortable working in an Agile development process., • Ability to communicate both verbally and in writing to technical and non-technical audiences and be able to adjust your communication style accordingly., • Experience in data analytics, statistical analysis, forecasting and modeling and data visualization tools. Compensation & Benefits: The benefits listed below may vary depending on the nature of your employment with Impinj and the country where you work. The typical base pay range for this role across the US is $129,000 - $200,000. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job DescriptionThe TeleGuidance Planning team at Zoox enables our autonomous vehicles to incorporate human contextual guidance into the planning algorithms, allowing our vehicles to successfully reason about and navigate complex scenarios by leveraging real-time remote human guidance. TeleGuidance is an integral part of the self-driving stack, dealing with some of the most challenging scenarios by fusing the “human sensor” data in real-time to plan a solution to complete the mission. Take a look at this video we made for a more thorough explanation: Zoox is looking for a motion planning software engineer to join our Planning and Control team. In this role, you will help us develop planner behavior and trajectories in collaboration with remote guidance and write on-vehicle C++ components that integrate human guidance into the execution of our robot. You’ll solve the most complex and challenging edge cases for autonomous systems that are absolutely crucial to enabling Zoox’s mission. In this role, you will: • Write on-vehicle C++ code that seamlessly integrates guidance provided by remote operators into the autonomous planner stack., • Work with fellow Planner engineers from vertical teams (agent handling, junctions, etc.), and you will represent TeleGuidance as a member on horizontal teams (construction zones, emergency vehicles, etc.)., • Design and implement new tools and features that remote operators will use to help our fleet of vehicles to navigate complex dense urban driving environments. You will work with QA to develop a test plan for your new features., • Have the opportunity to contribute to a broad portion of the code base, as dictated by your skills and interests. Members of our team have contributed to motion planning, trajectory optimization, GPU code, offline tooling/simulation, cost tuning, and more., • Collaborate with developers across the AI software organization as a whole: Prediction, Perception, Core/Infra, and more.Qualifications, • Master's degree in Computer Science or related field, • Experience writing performance-critical production code in C++, • Demonstrated ability to create real-time motion planning algorithms, • Understanding of configuration spaces and a variety of planning techniques (A*, D*, RRTs, etc.), • Extensive experience with programming and algorithm design, • Strong mathematical and geometrical skills, • Experience leading small projects or teamsBonus Qualifications, • PhD in Computer Science or related field, • Experience with autonomous robots, Telerobotics

Job Description The Kestra team has over 400 years of experience in the external and internal cardiac medical device markets. The company was founded in 2014 by industry leaders inspired by the opportunity to unite modern wearable technologies with proven device therapies. Kestra’s solutions combine high quality and technical performance with a wearable design that provides the greatest regard for patient comfort and dignity. Innovating versatile new ways to deliver care, Kestra is helping patients and their care teams harmoniously monitor, manage, and protect life. The Senior Supplier Quality Engineer is responsible for working with our development team and external suppliers to deliver high quality, life-saving products; from development, through the life of the product. Manages all aspects of tier one and sub-tier supplier quality activities for assigned suppliers/ commodities; drives quality and process improvement at assigned suppliers/commodities. Assesses, monitors, and ensures the continued adequacy and effectiveness of the quality system for the assigned supplier base. Supports supplier selection, supplier process validation/controls, general supplier development. Reviews and approves inspection sampling plans for selection parts. ESSENTIAL DUTIES • Leads new and existing supplier audits, selection, development, and supports supply chain team strategies, • Participates in design reviews with development teams and suppliers to ensure manufacturable designs and, • definition of critical-to-quality/process/function parameters for critical components/sub-systems, • Manages supplier part/assembly qualifications using PFMEA/AQPQ/PPAP techniques, • Manages supplier process validation plans, and reports using IQ/OQ/PQ validation techniques, • Approves supplier test and inspection plans and procedures to ensure quality at the source, • Maintains supplier key performance indicators (KPIs) to support supplier score cards, and drive, • improvements., • Drives supplier quality MRB dispositions, root cause determination, and 8D corrective actions/supplier, • corrective action requests (SCAR), • Utilizes six-sigma and lean manufacturing techniques to lead continuous improvement of supplier, • performance working with supply chain and development teams, • Acts as supplier primary technical contact working both independently and in teams to support company, • objectives, • Maintains 100% compliance to Kestra Medical Quality Management System, • Responsible for technical project management of supplier Audit, PPAP, SCAR, and other deliverables to meet, • internal deadlines, and achieve objectives COMPETENCIES • Passion: Contagious excitement about the company – sense of urgency. Commitment to continuous, • improvement, • Integrity: Commitment, accountability, and dedication to the highest ethical standards, • Collaboration/Teamwork: Inclusion of Team Member regardless of geography, position, and product or, • service, • Action/Results: High energy, decisive planning, timely execution, • Innovation: Generation of new ideas from original thinking, • Customer Focus: Exceed customer expectations, quality of products, services, and experience always present, • of mind, • Emotional Intelligence: Recognizes, understands, manages one’s own emotions and is able to influence, • others. A critical skill for pressure situations, • Ability to be a self-starter, seek new and better methods, and work with minimum supervision, • Capability to discern relevant facts and in turn, effectively resolve issues by making good decisions, • (compliance, quality, integrity, ethics, and critical thinking ability), • Ability to be flexible in a fast-paced goal-oriented environment, • Demonstrates the understanding of deadlines and time limits, ability to accomplish goals, and the desire to QUALIFICATIONS Education/Experience Required: • Bachelor's degree in electrical engineering or material science, technical science or equivalent combination of, • education and directly relevant experience, • 8+ years’ directly relevant experience, with prior experience in a FDA/cGMP or regulated environment, • Working knowledge of PPAP and IQ/OQ/PQ validation techniques, • Strong written and verbal communication skills, • Direct experience as a Manufacturing Engineer, Test Engineer, or Supplier Quality Engineer with the assigned, • commodities, • High level Excel or other statistical software skills for data analysis, problem solving and reporting, • Deep expertise in high-level quality systems best practices Preferred: • 8+ years of experience in FDA/regulated environment, • Team leadership and project management experience, • Contract manufacturing support/ PCBA manufacturing support, • Experienced with six-sigma and lean manufacturing techniques, • Direct experience working with injection molding, plastic film welding/bonding, over-molded cables, and/or, • Wire harness assembly, • Ability to translate quality improvements to cost savings, • Certified quality auditor SUPERVISORY RESPONSIBILITIES: None WORK ENVIRONMENT: • Indoor open office environment, • Minimal noise volume typical to an office environment, • Extended/overtime hours when needed, • Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug, • Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a, • condition of employment. PHYSICAL DEMANDS • Frequent repetitive motions that may include wrists, hands and/or fingers, such as keyboard and mouse, • usage, • Frequent stationary position, often standing or sitting for prolonged periods of time, • Frequent computer use, • Frequent phone and other business machine use, • Occasional lifting required, up to 20 pounds TRAVEL Frequent travel is required, 10-15% OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member. Duties, responsibilities, and activities may change or new ones may be assigned at any time with or without notice. Benefits Kestra offers a very competitive benefit package including Medical, Dental, 401K with Match, etc. Pay equity is an important part of Kestra’s Culture. Our compensation ranges are guided by national and local salary surveys and take into consideration experience level and internal equity. Each role is benchmarked based on the job description provided If your qualifications and/or experience level are outside of the posted position, we encourage you to apply as we are growing fast and roles that are coming soon may not be posted. Salary: Annualized at $140,000 - $150,000, plus bonus. Depending on experience. Kestra Medical Technologies is an equal opportunity employer. Kestra Medical Technologies does not discriminate on the basis of race, color, religion, national origin, veteran status, age, sexual orientation, gender identity and/or expression, marital status, disability, physical or mental status or any other characteristic protected by law. We are unable to sponsor or take over sponsorship of employment visas at this time. Applicants must be eligible to work for any employer in the U.S. Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Mechanical Engineer III at Carbon Robotics you will play a key role in developing new mechanical and structural robotic systems that will radically change how our customers do business. You will immediately bring your experience architecting, designing, analysing, prototyping, producing, and supporting new products to multiple cornerstone programs currently under development. As part of a growing Mechanical Engineering team you'll find many opportunities for technical and career growth. What you'll do: • Work on a fast-paced, multi-disciplinary team to ensure the successful development, deployment, and sustainment of multiple revolutionary robotics products., • Architect, design, analyze, test, and support robot/vehicle primary structures, electronics enclosures, complex actuated systems, and life safety critical sensor installations., • Support, and at times lead, component and system level qualification test design and execution., • Lead initial production builds with the manufacturing team at our Richland, Washington facility., • Meeting our customers where they are, in farms and fields across the country, ensuring your designs will and do meet their needs, • Own Standards and Compliance scoping and documentation for the products you design. Knowledge, Skills, and Abilities for Success:, • 5 to 12 years experience designing, testing, producing and supporting complex mechanical and structural parts, assemblies, and systems in the automotive, agricultural, aerospace, or equivalent markets., • High level of proficiency in the use of CAD and Analytical tools (Solidworks and Ansys Mechanical)., • Experience designing and producing most or all of the following; sheet metal, bar stock, welded, machined, thermoplastic and composite parts., • Experience designing for harsh outdoor environments to protect against water ingress, rust, corrosion, and shock/vibe damage., • Demonstrated ability to quickly prototype, troubleshoot, and iterate designs with both deep ownership and team collaboration., • Demonstrated ability to work with direct and matrixed management to achieve timely objectives., • Highly desired to have past experience working with component vendors to find acceptable COTS components when possible, while also being able to lead Build to Spec and Build to Print vendors., • Highly desired to have past experience designing to SAE, DOT, and other applicable standards/codes., • Highly desired to have past experience working with a test engineering organization to set up, operate, and analyze results from shock/vibe and structural testing., • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity – paying employees equitably for similar work. Offers are dependent on someone experience and may be outside of the published range when appropriate. If your skills are above the posted range... Apply! We want to hear from you! Carbon Robotics' base salary pay range:$115,000—$150,000 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job DescriptionWho we are Metropolis is an artificial intelligence company that uses computer vision technology to enable frictionless, checkout-free experiences in the real world. Today, we are reimagining parking to enable millions of consumers to just "drive in and drive out." We envision a future where people transact in the real world with a speed, ease and convenience that is unparalleled, even online. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working and playing remarkable - giving us back our most valuable asset, time. Who you are We are looking for a Staff Web Engineer to join our Customer Experience application development team and contribute to the next step function growth phase. As a member of the engineering team, you will have the opportunity to design and build systems and features from the ground-up, have a big role to play in defining the direction of our product and mentor other engineers. The ideal candidate will have a product-oriented mindset with a passion for technology and customer satisfaction. This engineer will play a critical role in the company's success by ensuring that software development efforts are aligned with customer needs and contribute to the company's overall growth and profitability. This is a unique opportunity to build an end-to-end mobility platform that supports high throughput locations, aviation, fleet management and other use cases impacting the everyday experience of millions of people. If you are energized by the mission to empower our customers to harness time through remarkable mobility products, this role is for you. We operate in a fast-paced, challenging, and fun environment! We work together as one team to deliver on our commitments. We challenge the status quo every day, internally and externally. What you'll do • Design, implement, and maintain frontend components that make up the Metropolis parking and mobility platform., • Lead the entire development lifecycle, from ideation and requirements through successful launch!, • Be a role model and mentor to both senior and junior engineers, fostering best practices in UI frameworks and component libraries., • Collaborate with product managers and designers to model and understand real world problems., • Moderate technical discussions, evaluate new techniques, and ensure our platform is constantly evolving and improving., • Leverage best practices in automation testing and deployment to enable rapid iteration and launch of new features., • Help build a culture where bugs and mistakes in production are treated as opportunities to improve the platform.What we're looking for, • MS or BS in Computer Science or equivalent work experience. Strong fundamental computer science skills., • 10+ years of software engineering experience. Advanced level knowledge of React and Typescript., • Experience with consuming RESTful APIs and iterating on them with backend engineers., • Proven track record of successfully designing and delivering large scale initiatives in high volume consumer facing applications., • Strong sense of system modeling and designing complex systems applicable to real world problems., • Deep understanding of Agile engineering processes that support the entire software development life cycle, including TDD/BDD, CI/CD and related build/test/deploy processes., • Excellent written and verbal communication skills with a proven ability to present complex technical information in a clear and concise manner to a variety of audiences., • Local to Santa Monica (Los Angeles), New York City, or Seattle areas While not required, these are a plus:, • Advanced knowledge of React and Typescript., • Work experience in innovative, high-growth environments Our Stack, • Languages + Frameworks: TypeScript, React, Scala (principally), Java (limited), • Datastores: MySQL, PostgreSQL, Snowflake, • Cloud: AWS, • Version control: Git & GitHub, • AI Tooling: Copilot on GitHub Metropolis values in-person collaboration to drive innovation, strengthen culture, and enhance the Member experience. Our corporate team members hold to our office-first model, which requires employees to be on-site at least four days a week, fostering organic interactions that spark creativity and connection Metropolis may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate's application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, Metropolis retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. Metropolis Technologies is an equal opportunity employer. We make all hiring decisions based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including gender identity, sexual orientation, or pregnancy), national origin, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Job DescriptionThe TeleGuidance Planning team at Zoox enables our autonomous vehicles to incorporate human contextual guidance into the planning algorithms, allowing our vehicles to successfully reason about and navigate complex scenarios by leveraging real-time remote human guidance. TeleGuidance is an integral part of the self-driving stack, dealing with some of the most challenging scenarios by fusing the “human sensor” data in real-time to plan a solution to complete the mission. Take a look at this video we made for a more thorough explanation: Zoox is looking for a motion planning software engineer to join our Planning and Control team. In this role, you will help us develop planner behavior and trajectories in collaboration with remote guidance and write on-vehicle C++ components that integrate human guidance into the execution of our robot. You’ll solve the most complex and challenging edge cases for autonomous systems that are absolutely crucial to enabling Zoox’s mission. In this role, you will: • You will write on-vehicle C++ code that seamlessly integrates guidance provided by remote operators into the autonomous planner stack., • Work with fellow Planner engineers from vertical teams (agent handling, junctions, etc.), and you will represent TeleGuidance as a member on horizontal teams (construction zones, emergency vehicles, etc.)., • You will design and implement new tools and features that remote operators will use to help our fleet of vehicles to navigate complex dense urban driving environments. You will work with QA to develop a test plan for your new features., • You will have the opportunity to contribute to a broad portion of the code base, as dictated by your skills and interests. Members of our team have contributed to motion planning, trajectory optimization, GPU code, offline tooling/simulation, cost tuning, and more., • You will collaborate with developers across the AI software organization as a whole: Prediction, Perception, Core/Infra, and more.Qualifications, • Master's degree in Computer Science or related field and 7+ years of experience, • Experience writing performance-critical production code in C++, • Demonstrated ability to create real-time motion planning algorithms, • Understanding of configuration spaces and a variety of planning techniques (A*, D*, RRTs, etc.), • Extensive experience with programming and algorithm design, • Strong mathematical and geometrical skills, • Experience leading small projects or teamsBonus Qualifications, • PhD in Computer Science or related field, • Experience with autonomous robots, Telerobotics, • Experience with CUDA, Protobuf, or TypeScriptBase Salary Range There are three major components to compensation for this position: salary, Amazon Restricted Stock Units (RSUs), and Zoox Stock Appreciation Rights. A sign-on bonus may be offered as part of the compensation package. The listed range applies only to the base salary. Compensation will vary based on geographic location and level. Leveling, as well as positioning within a level, is determined by a range of factors, including, but not limited to, a candidate's relevant years of experience, domain knowledge, and interview performance. The salary range listed in this posting is representative of the range of levels Zoox is considering for this position. Zoox also offers a comprehensive package of benefits, including paid time off (e.g. sick leave, vacation, bereavement), unpaid time off, Zoox Stock Appreciation Rights, Amazon RSUs, health insurance, long-term care insurance, long-term and short-term disability insurance, and life insurance.About ZooxZoox is developing the first ground-up, fully autonomous vehicle fleet and the supporting ecosystem required to bring this technology to market. Sitting at the intersection of robotics, machine learning, and design, Zoox aims to provide the next generation of mobility-as-a-service in urban environments. We’re looking for top talent that shares our passion and wants to be part of a fast-moving and highly execution-oriented team. Follow us on LinkedIn AccommodationsIf you need an accommodation to participate in the application or interview process please reach out to or your assigned recruiter. A Final Note:You do not need to match every listed expectation to apply for this position. Here at Zoox, we know that diverse perspectives foster the innovation we need to be successful, and we are committed to building a team that encompasses a variety of backgrounds, experiences, and skills. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About Us At Prenuvo, we are on a mission to flip the paradigm from reactive "sick-care" to proactive health care. Our award-winning whole body scan is fast (under 1 hour), safe (MRI has no ionizing radiation), and non-invasive (no contrast). Our unique integrated stack of optimized hardware, software, and increasingly AI, coupled with the patient-centric experience across our domestic and global clinics, have allowed us to lead the change against "we caught it too late again". We are looking for a Senior QA Engineer to join our team! You will be responsible for ensuring the quality of a suite of tools for providers, patient workflows, and diagnostic reporting. Successful candidates will be ambitious, self-driven, and organized — deeply invested in both the user experience and the real-world functionality of our products. This role is fully remote; however, we have a preference for candidates based in the Pacific Time Zone (PST) to better align with team collaboration. Help reshape the world through proactive healthcare while working with cutting-edge technology and high performing teams with deep expertise - join us to make a difference in people's lives! What You'll Do • Collaborate closely with product managers, designers, and developers to shape quality from the ground up., • Analyze and evaluate business requirements with product managers and translate them into test strategies., • Create, execute, and maintain test documentation and test plans., • Execute manual and automated testing of web applications: exploratory, functional, acceptance, regression, and UI testing., • Test APIs and backend services (REST, GraphQL) for robustness and correctness., • Ensure that quality issues and defects are appropriately identified, documented, prioritized, and tracked., • Lead root cause analysis with developers to accelerate defect resolution., • Mentor junior QA engineers and help instill best practices across the team., • Be an active voice in process improvements to raise product quality and engineering performance., • Integrate testing into CI/CD pipelines to enable continuous quality., • Ensure web applications meet accessibility standards (WCAG/ADA) through manual and automated testing., • 4+ years of professional experience in software QA., • Strong knowledge of QA methodologies, tools, and processes., • Experience with test design techniques and practical implementation., • Strong knowledge of web technologies: HTML, CSS, client-server architecture, and APIs., • Experience testing RESTful and GraphQL APIs., • Awareness of accessibility standards (e.g., WCAG) and experience testing with tools like Axe, Lighthouse, or screen readers., • Solid experience with bug tracking systems (e.g., JIRA)., • Strong analytical and communication skills, with proven problem-solving abilities., • A collaborative mindset and a passion for delivering high-quality, user-centered products., • Experience testing native mobile applications (iOS and/or Android)., • Familiarity with mobile app testing tools such as Xcode, Android Studio, Appium, Detox, or BrowserStack., • Understanding of mobile app distribution workflows (TestFlight, Google Play Console) and CI/CD integration., • Experience with automated testing frameworks (Selenium, Cypress, Appium, Espresso, XCUITest)., • Experience designing and executing accessibility test strategies to ensure inclusive user experiences., • Experience contributing to performance and security testing initiatives. First: we are Pioneers • An avenue to make a positive impact on people's lives and their health, • We believe in preventative healthcare for everyone, including our team - Prenuvo provides free, whole-body scans to each team member, • Growth opportunities are at the heart of our people journey, we're doing big things with bright minds - there is no single path to success, it can be shaped along the way, • Building strong relationships is at the core of everything we do - our team gets together each week to connect, share, and socialize, • Recognizing time away to restore is vital to our wellbeing - we have a flexible vacation policy and we will encourage you to use it, • We now offer the Prenuvo's Commuter Benefits Plan to help cover your transit and parking costs. Whether you ride, drive, or park, we've got you covered—making your commute easier and more affordable!, • Retirement made easy! Prenuvo offers a 401(k) retirement savings plan to eligible employees, allowing team members to make pre-tax contributions toward their retirement. While Prenuvo facilitates access to the plan, the company does not currently offer matching contributions., • We offer a comprehensive benefits package including health, dental, vision, including Mental Health coverage, to support you and your family As part of the hiring process, successful candidates will undergo a background check in compliance to applicable federal, provincial, and state rules. Please be advised that official communication from our recruitment team will only come from our authorized domain [prenuvo.com]. If you are contacted by a recruiter, please ensure their email address ends with @prenuvo.com. We do not use third-party recruitment services or any other email domains for hiring purposes. If you receive communication that you believe to be fraudulent, please report it immediately to .

Job Description Position: Systems Engineer IV Location: Kirkland, WA Duration: 12 Months Job Type: Contract Work Type: Onsite Job Description · We're looking for a hands-on Systems Engineer with a background in the requirements management, design for manufacturing, hardware/software development for hardware test. Key job responsibilities This is a role for a highly collaborative individual who will help us with optimizing for high volume production and meeting cross discipline requirements. We are looking for an outstanding engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively: · Lead the development test system validation · Lead software/hardware integration testing · Lead innovative software/firmware/hardware architectures and flows for multiple manufacturing test lines · Lead review and analysis on data using tools such as MATLAB, Python, or similar. · Support and organize the release of the software and hardware system documents through gate reviews · Investigate and troubleshoot yield issues during prototype and production builds · Write status and/or build reports for cross-functional review · Drive and prioritize execution of system test campaigns · Design and develop software/scripting test setups and supporting hardware for various subsystem validation of the satellite bus. · Identify and analyze the cross-functional tradeoffs between design alternatives, including impact on performance, schedule, cost, risk, complexity, and scale. · Drive cross-functional schedules, test requirements, specifications and limits with the hardware development team · Work concurrently with the design engineers to provide design for testability (DFT) feedback throughout the design process · Support production and integration efforts for hardware subsystems. · Define test strategy, implement and optimize test setup/processes at the CM including design and qualification of test fixtures, test equipment, and test software · Develop procedures, preventative maintenance plans, and troubleshooting guides to support production · Develop and communicate system integration and evaluation strategies and plans in support of program learning, technical risk reduction, verification, and validation · Interested and able to travel domestically and internationally A day in the life · You will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at the client in different locations. · You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved before. BASIC QUALIFICATIONS · Experience in automating, deploying, and supporting large-scale infrastructure · Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust · Prefer Experience with Linux/Unix · Prefer Experience with CI/CD pipelines build processes · Bachelor’s or Associates Degree in Computer Science or related field or relevant work experience Experience joint hardware/firmware development; partnering with software engineers to bring-up and test new hardware designs · Familiarity with vacuum systems, high-voltage testing, and environmental testing (thermal, vibration, EMI). · Experience with creating Design of Experiments · Comfortable working in a fast-paced environment with evolving priorities while ensuring high-quality execution. · Excellent written and verbal communication; ability to explain complex concepts and designs to colleagues across disciplines Candidate Requirements REQUIRED SKILLS · Experience joint hardware/firmware development; partnering with software engineers to bring-up and test new hardware designs · Familiarity with vacuum systems, high-voltage testing, and environmental testing (thermal, vibration, EMI). · Experience with creating Design of Experiments · Comfortable working in a fast-paced environment with evolving priorities while ensuring high-quality execution. · Excellent written and verbal communication; ability to explain complex concepts and designs to colleagues across disciplines Years of Experience: 5 year Degree or Certification: Bachelor’s or Associates Degree in Computer Science or related field or relevant work experience Leadership Principle: Customer Obsession, Learn and Be Curious, Dive Deep, Clear communication Top 3 must-have hard skills · automating, deploying, and supporting large-scale infrastructure · Language such as Python, Ruby, Golang, Java, C++, C#, Rust · Experience joint hardware/firmware development

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Carbon Robotics's Regulatory Compliance and Certification Engineer, you will ensure our LaserWeeder and autonomous vehicle platforms meet all applicable safety standards and regulations while driving certification programs to completion. You will be laser focused on navigating the complex regulatory landscape for agricultural robotics, autonomous vehicles, and laser systems while working closely with engineering teams to implement compliant designs from concept through production. You will coordinate heavily with Mechanical, Electrical, and Software Engineering teams as well as Program Management, Manufacturing, and Legal to ensure our products can be legally operated in all target markets. What you'll do: • Lead compliance and certification programs for LaserWeeder and autonomous vehicle platforms across multiple jurisdictions, • Manage laser safety certifications across multiple geographies (US, Canada, Europe, Australia, Japan, etc.), • Support Mechanical, Electrical, Firmware, and Software design teams in defining compliance and certification requirements at the beginning of programs, • Support test engineering in functional, performance, and safety validation testing for new products and features. May also include coordinating EMC/EMI testing and manage FCC, CE, and other electromagnetic compatibility certifications, • Interface with test houses, certification bodies, and regulatory agencies to obtain required documentation and approvals, • Create and maintain compliance documentation including technical files, test plans, and declaration of conformity, • At least 8-15 years experience managing compliance programs for complex machinery (agricultural, automotive, aerospace or robotics preferred), • Experience navigating multi-jurisdictional regulatory requirements and managing certification timelines, • Strong technical background to understand mechanical, electrical, and software system designs, • Proven project management skills to coordinate certification efforts across multiple products, • Experience working with workflow management tools such as Jira and documentation tools such as Confluence, • Excellent communication skills for working with engineers, regulators, and external test facilities, • Willingness to travel ~20% to test facilities, certification bodies, and field locations Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job DescriptionCompany Description Organizations everywhere struggle under the crushing costs and complexities of “solutions” that promise to simplify their lives. To create a better experience for their customers and employees. To help them grow. Software is a choice that can make or break a business. Create better or worse experiences. Propel or throttle growth. Business software has become a blocker instead of ways to get work done. There’s another option. Freshworks. With a fresh vision for how the world works. At Freshworks, we build uncomplicated service software that delivers exceptional customer and employee experiences. Our enterprise-grade solutions are powerful, yet easy to use, and quick to deliver results. Our people-first approach to AI eliminates friction, making employees more effective and organizations more productive. Over 72,000 companies, including Bridgestone, New Balance, Nucor, S&P Global, and Sony Music, trust Freshworks’ customer experience (CX) and employee experience (EX) software to fuel customer loyalty and service efficiency. And, over 4,500 Freshworks employees make this possible, all around the world. Fresh vision. Real impact. Come build it with us. Job Description We are looking for a Frontend AI UI Engineer to design and implement highly interactive, intuitive, and enterprise-grade UIs for our Agentic AI Platform. You will collaborate closely with the Principal AI UI Architect to deliver visual interfaces that allow users to build, test, debug, and deploy outcome-driven reasoning agents. This role involves developing agent builders, simulation tools, dialog orchestration interfaces, and multi-channel assistant deployment UIs, ensuring a seamless developer and enterprise experience. Key Responsibilities Agentic UI Development • Build interactive visual editors (drag-and-drop) for agent orchestration and reasoning workflows (LangGraph visualization)., • Implement prompt management, versioning, and testing interfaces for agent development., • Develop real-time debugging tools to visualize agent reasoning traces, tool invocations, and dialog flows., • Implement user simulation frameworks for testing agent strategies with varied personas and scenarios, • Build A/B testing dashboards for evaluating outcome-driven strategies across agents and prompts., • Develop dialog flow editors to design multi-turn conversations with branching, context retention, and hierarchical dialogs., • Collaborate with the architect to define frontend design patterns, state management, and modular UI frameworks., • Integrate frontend with backend APIs, agent runtimes, and real-time event streams., • Partner with backend engineers to integrate APIs and orchestration services into the UI seamlessly., • Work closely with UX designers to deliver high-quality, intuitive user interfaces aligned with AI/agent workflows. Required Qualifications • 7+ years of frontend engineering experience, building complex enterprise-grade UIs, • Strong expertise in React (e.g., next.js), TypeScript, and state management, • Experience developing visual workflow builders or graph-based editors (e.g., d3.js, React Flow), • Knowledge of real-time UI deployment for live agent monitoring/debugging, • Familiarity with agentic AI concepts and their UI/UX requirements, • Proficiency in frontend testing, performance profiling, and accessibility best practices, • Experience building low-code/no-code interfaces for AI or developer platforms, • Familiarity with LangSmith and agent observability tooling integration in UI workflows, • Exposure to conversational UI/UX design for chat and voice assistants, • Prior experience with real-time collaborative editing (CRDTs, Yjs, or similar frameworks), • Startup or early-stage product development experience in AI-driven SaaS environments Additional Information The annual base salary range for this position is $238,000 - $342,000. Compensation is based on a variety of factors including but not limited to location, experience, job-related skills, and level. Bonus/equity may be available. Freshworks offers multiple options for dental, medical, vision, disability and life insurances. Equity + ESPP, flexible PTO, flexible spending, commuter benefits and wellness benefits are also offered. Freshworks also offers adoption and parental leave benefits. At Freshworks, we are creating a global workplace that enables everyone to find their true potential, purpose, and passion irrespective of their background, gender, race, sexual orientation, religion and ethnicity. We are committed to providing equal opportunity for all and believe that diversity in the workplace creates a more vibrant, richer work environment that advances the goals of our employees, communities and the business.

Job DescriptionCompany Description Organizations everywhere struggle under the crushing costs and complexities of “solutions” that promise to simplify their lives. To create a better experience for their customers and employees. To help them grow. Software is a choice that can make or break a business. Create better or worse experiences. Propel or throttle growth. Business software has become a blocker instead of ways to get work done. There’s another option. Freshworks. With a fresh vision for how the world works. At Freshworks, we build uncomplicated service software that delivers exceptional customer and employee experiences. Our enterprise-grade solutions are powerful, yet easy to use, and quick to deliver results. Our people-first approach to AI eliminates friction, making employees more effective and organizations more productive. Over 72,000 companies, including Bridgestone, New Balance, Nucor, S&P Global, and Sony Music, trust Freshworks’ customer experience (CX) and employee experience (EX) software to fuel customer loyalty and service efficiency. And, over 4,500 Freshworks employees make this possible, all around the world. Fresh vision. Real impact. Come build it with us. Job Description We are seeking a Backend AI Platform Engineer to design and build core backend services that power our Agentic AI Platform, enabling reasoning-driven agents, multi-agent orchestration, dialog management, and outcome-based workflows. You will work closely with the Principal AI Agentic Architect to implement high-performance APIs, orchestration runtimes, agent lifecycle management, and integration with frameworks like LangChain, LangGraph, and LangSmith. This role is hands-on and ideal for someone passionate about building robust, scalable backend systems in a fast-paced, startup-like environment. Key Responsibilities: Platform Backend Development • Experience building agent runtime systems, orchestration layers, or reasoning engines., • Implement agent runtime orchestration services for reasoning, planning, and tool invocation (integrating LangChain/LangGraph)., • Develop APIs and SDKs for building, deploying, and managing agent workflows and tools., • Build stateful dialog management and memory services to support multi-turn, context-aware agents., • Work with the Architect to build cloud-native, event-driven backend services using microservices or service mesh architecture., • Design task scheduling and workflow orchestration (e.g., Temporal/Airflow) for agent planning and long-running operations., • Develop real-time message buses (Kafka/Pub-Sub) for agent communication and event propagation., • Implement integrations with enterprise systems, APIs, and knowledge sources (REST, GraphQL, gRPC)., • Work with vector DBs (e.g., ElasticSearch, Pinecone, Weaviate, FAISS) and RAG pipelines for knowledge-augmented reasoning agents., • Build secure multi-tenant backend services with RBAC, API authentication, and tenant isolation., • Ensure agent action auditability and reproducibility for compliance and governance., • Write automated test suites (unit, integration, load testing) for backend services., • Implement logging, tracing, and metrics (OpenTelemetry, Prometheus, Grafana) for full observability., • Participate in on-call rotations and improve platform resiliency and fault tolerance. Please note: This is a hybrid role that will be based in San Mateo, CA or Bellevue, WA and requires an in-office presence three days per week (Tuesday - Thursday). Qualifications Required Qualifications: • 7+ years of backend engineering experience, with at least 2+ years in AI/ML platform development., • Strong programming skills in Java and Python, • Hands-on experience with LangChain, LangGraph, LangSmith LLM/agent frameworks, • Expertise in distributed systems, event-driven architectures, and microservices, • Solid experience with cloud platforms (AWS), Kubernetes, and IaC (Terraform/Helm), • Familiarity with databases (PostgreSQL, Redis, MongoDB) and vector databases (ElasticSearch, Pinecone, FAISS, Weaviate), • Understanding of workflow orchestration (Temporal/Airflow) and messaging systems (Kafka, RabbitMQ), • Exposure to conversation orchestration, dialog state tracking, and AI-driven planning systems, • Familiarity with enterprise security standards (RBAC, SSO/OAuth2, data encryption), • Prior experience in startup or high-growth environments building SaaS platforms, • Contributions to open-source AI agentic frameworks or backend libraries Additional Information The annual base salary range for this position is $238,000 - $342,000. Compensation is based on a variety of factors including but not limited to location, experience, job-related skills, and level. Bonus/equity may be available. Freshworks offers multiple options for dental, medical, vision, disability and life insurances. Equity + ESPP, flexible PTO, flexible spending, commuter benefits and wellness benefits are also offered. Freshworks also offers adoption and parental leave benefits. At Freshworks, we are creating a global workplace that enables everyone to find their true potential, purpose, and passion irrespective of their background, gender, race, sexual orientation, religion and ethnicity. We are committed to providing equal opportunity for all and believe that diversity in the workplace creates a more vibrant, richer work environment that advances the goals of our employees, communities and the business.

Job DescriptionAbout Aerostrat Aerostrat is a fast-growing B2B SaaS company building a complete maintenance planning solution for the aviation industry. Our core product, Aerros, enables our customers to plan all the maintenance on hundreds of aircraft in a matter of minutes. Our solution helps customers understand the cost and efficiency of their maintenance operations while giving them the confidence to make data-backed business decisions. Over the past six years, Aerostrat has achieved a customer base that includes some of the world’s most well-known airlines and aircraft operators. Aerostrat’s success to date has been driven by a lean team focused on transforming complex asks into an easy-to-use product. About this role As a QA focused software engineer at Aerostrat, you'll play a critical part in helping us build high quality experiences for our customers. You will build test automation and any related infrastructure needed to better understand the state of our product, validate user flows, and improve the quality and user experience of our product. Our QA software engineers ensure that customers continue to love our product through improvements in reliability, performance, security and more. Having a deep understanding of test automation at all levels (unit/integration/API/E2E) and test infrastructure is mandatory. Extensive experience with Playwright, Cypress, or other E2E test automation frameworks is critical. Experience with other types of testing such as performance, security, accessibility and more will also be important. As a member of our small but growing engineering team, you'll need to be a self-motivated, high-impact and driven individual that goes out of your way to learn about and produce the best solutions for our customers. Because our team is so lean, you will have a real opportunity to contribute to the direction of the product and see your ideas in make it into production on a regular basis.In this role, you will... • Learn everything there is to know about aviation maintenance planning through our on-boarding process (so don't worry if you do not have any experience in this industry!), • Build critical API/E2E test automation to ensure our products are in the best state possible for our customers, • Build other test and quality infrastructure to improve quality of our product (perf, security, mobile, etc.), • Coordinate bug bashes and manually test our product where automation gaps exist, • Play a crucial role in the development of new features through design feedback, proposing acceptance criteria, and testing new features as they are developed, • Deliver reliable, high-quality, well tested code with speed and care, • Utilize our monitoring/APM tools to analyze metrics, investigate issues and propose changes to improve our performance and user experience, • Investigate complex customer issues to identify bugs, verify reproduction steps and propose fixesThis role is great for you if..., • You have 2+ years of experience developing API/E2E test automation (ex. Playwright, Cypress), • You have strong software engineering fundamentals and have experience writing high quality production-level code in Python, C#, or JS, • You have experience with building QA/testing infrastructure (ex. setting test environments, automating performance/security testing tools, developing QA-related telemetry and reports, etc.), • You love trying to break products and have experience testing complex web applications (bonus points for experience testing WebGL), • You are not afraid to perform manual testing to cover gaps in test automation, • You love digging deep into complex problems and solving real customer issues, • You have a positive attitude and communication style because we've learned that excellent written communication and attitude go a long way for a remote teamCompensation, • Title: Dependent upon Experience and Location, • Salary: Dependent Upon Level:, • Software Engineer II - QA Range: $100k - $130k, • Software Engineer Sr - QA Range: $110k - $150k, • Job Type: Full-time; Remote, • Schedule: TBDBenefits, • Competitive compensation with opportunities for equity, • Working remotely with flexible hours, • Company paid health, vision and dental insurance with subsidized dependents, • 20 days of PTO, 5 sick days, and 11 holidays per year, • HSA with employer contributions, • 401k with matching, • Profit-sharing program, • Monthly internet and mobile phone credits, • Weekly DoorDash stipend and DashPass membership, • Travel discounts with our corporate travel provider

Job Description StubHub is on a mission to redefine the live event experience on a global scale. Whether someone is looking to attend their first event or their hundredth, we're here to delight them all the way from the moment they start looking for a ticket until they step through the gate. The same goes for our sellers. From fans selling a single ticket to the promoters of a worldwide stadium tour, we want StubHub to be the safest, most convenient way to offer a ticket to the millions of fans who browse our platform around the world. StubHub is seeking Senior Software Engineers in iOS to design and develop next-generation technologies and complex features. As a Senior Software Engineer, you will be at the forefront of tackling significant, ambiguous, and non-trivial challenges as a core contributor and innovator, bringing creative technical solutions to life. In order to ensure our company's success, our Senior Software Engineers must demonstrate initiative and enthusiasm for the problems they tackle. StubHub is committed to being a phenomenal and inclusive place to work. As a Senior Software Engineer, you will also be an advocate and mentor for your team members, displaying leadership qualities and being an example for those around you. Location: Hybrid (3 days in office/2 days remote)About the teamThe Consumer Experience (CX) team is responsible for the end-to-end product experience for fans looking to discover, buy, and sell tickets to their favorite live events through our web and mobile platforms. It sits at the forefront of fulfilling StubHub's mission to become the global destination for accessing live event experiences by crafting the product experience that millions of fans interact with every day. We are obsessed with understanding our users' needs and delivering feature innovations, both short-term and long-term, that are as effective as they are enjoyable. We serve a global fan base and aim to deliver a localized experience that feels personalized to every individual in over 60 regions and 30 languages. We believe that diversity of thought and transparency of impact breed the best innovations, which is why we are a cross-functional team of specialists in product, design, engineering, and data working closely together with equal voice in ideation and equal access to insights. We work across the entire stack leveraging any tool or technology necessary to support web and mobile feature innovation at scale.What You'll Do: • Design, develop, test, deploy, and maintain impactful improvements across all StubHub's platforms and products, resulting in high-quality outcomes, • Collaborate with team members to ensure best practices across our code, • Manage individual initiative priorities, deadlines, and deliverables with your technical expertise, • 5-6+ years of professional experience in software development, • Extensive experience developing robust, mission-critical systems using multiple general-purpose programming languages (Swift or Objective-C), • Demonstrated expertise in building software with one or more of the following: Infrastructure, Databases, Data Processing, Machine Learning, Distributed Systems, Security, and Privacy, • Previous experience designing and developing solutions to complex problems with significant business impact, • A strong understanding of how their systems interact with the broader production environment, including dependencies and platform primitives, • Exposure to React Native, • Proven ability to learn other coding languages, platforms, frameworks, and tools, • Experience owning projects from the initial idea all the way to production, • Accelerated Growth Environment: Immerse yourself in an environment designed for swift skill and knowledge enhancement, where you have the autonomy to lead experiments and tests on a massive scale., • Top Tier Compensation Package: Enjoy a rewarding compensation package that includes enticing stock incentives, aligning with our commitment to recognizing and valuing your contributions., • Flexible Time Off: Embrace a healthy work-life balance with unlimited Flex Time Off, providing you the flexibility to manage your schedule and recharge as needed.

Job Description We are currently seeking to hire a Senior Full-Stack Software Engineer to join our fully remote team. In this hands-on role, you will work closely with our CTO, engineering team, project manager, and QA, to design, build, and ship new features across our web and mobile platforms. We value critical thinking, creativity, and a strong sense of ownership. You’ll have the autonomy to make impactful technical decisions while collaborating directly with leadership. This is a full-time, senior-level position with flexibility in start date. Work hours are aligned with U.S. business hours (approximately 9am–5pm in your U.S. time zone). Our ideal candidate has a proven track record of delivering products end-to-end and is excited about leveraging modern tools (including AI-assisted development) to boost productivity and code quality. If you’re passionate about building great software in a collaborative small-team environment, we’d love to hear from you! Responsibilities: * Develop and Ship Product Features: Design, implement, test, and deploy new product features across the full stack (front-end and back-end). Ensure high-quality, maintainable code and a great user experience. * Technical Leadership & Collaboration: Work directly with the CTO on architecture and technical strategy. Coordinate with and provide guidance to engineers, conducting code reviews and aligning development efforts with best practices. * Full-Stack Development: Tackle tasks across our tech stack - from database and API development to frontend UI/UX enhancements. Our current stack includes modern web and mobile technologies (Ruby on Rails and React Native, among others) * Problem Solving & Critical Thinking: Analyze complex business requirements and translate them into technical solutions. Solve challenging problems with a critical mindset, and troubleshoot/debug issues across the stack. * AI-Enhanced Efficiency: Leverage AI tools (e.g. code assistants, Copilot, Cursor, GPT-based tools) to improve development efficiency, automate routine tasks, and maintain high code quality. Continuously explore new tools and practices that can speed up our workflow. • Proven Full-Stack Experience: 5+ years of professional software development experience across the stack. Demonstrated history of shipping products to production and seeing projects through from start to finish., • Critical Thinking & Problem-Solving: Excellent analytical skills with the ability to break down complex problems and design effective, simple solutions. You make decisions based on data and best practices., • AI Tool Proficiency: Hands-on experience using modern AI-driven development tools (such as GitHub Copilot, ChatGPT, or similar) to accelerate coding, testing, or documentation. A forward-thinking mindset to adopt new productivity tools is a must., • Technical Skills: Proficiency in at least one modern back-end framework (e.g. Node.js, Ruby on Rails, Django, etc.) and one front-end framework/library (e.g. React, Angular, Vue). Comfortable with databases (SQL or NoSQL) and building RESTful APIs., • Code Quality & Best Practices: Strong understanding of software engineering best practices (version control, code reviews, testing, CI/CD). Ability to write clean, maintainable, and well-documented code. Ruby on Rails (RoR): Experience building web applications with Ruby on Rails is highly desired. Our back-end is RoR - while not strictly required, it will help you hit the ground running. * React Native: Experience developing mobile applications using React Native (or a similar cross-platform mobile framework). * DevOps & Cloud: Familiarity with AWS, Azure, or other cloud platforms, CI/CD pipelines, and DevOps practices. Ability to deploy and monitor applications in a cloud environment is a bonus. * Startup Experience: Prior experience in a startup or small company environment. You’re comfortable wearing multiple hats and adapting to fast-changing priorities. * Leadership & Mentorship: Experience leading projects or mentoring junior developers/contractors. You take initiative and can drive a project from concept to completion, while guiding others when needed. * Additional Languages & Frameworks: Knowledge of other relevant technologies (especially Python, TypeScript, mobile UX/UI principles) and any domain-specific experience is a plus. Company DescriptionDistiller is an award-winning spirits discovery platform that connects spirits consumers with trusted spirits retailers from all over the world. We’ve created web and mobile applications that allow spirits consumers to write tasting notes, track their purchase histories, organize their collections and research new products. We also create rich high-quality spirits-related content including expert reviews, long form editorial pieces, instructive videos and more. Today, Distiller is trusted by millions of users every year. The platform features thousands of expert reviews, tasting notes, and user-contributed insights - serving as a comprehensive resource whether you're shopping at a store, ordering at a bar, or tracking your own collection.Distiller is an award-winning spirits discovery platform that connects spirits consumers with trusted spirits retailers from all over the world. We’ve created web and mobile applications that allow spirits consumers to write tasting notes, track their purchase histories, organize their collections and research new products. We also create rich high-quality spirits-related content including expert reviews, long form editorial pieces, instructive videos and more. \r\n\r\nToday, Distiller is trusted by millions of users every year. The platform features thousands of expert reviews, tasting notes, and user-contributed insights - serving as a comprehensive resource whether you're shopping at a store, ordering at a bar, or tracking your own collection.

Job DescriptionAt IUNU (“you knew”), we're amplifying the ability of growers to produce the highest quality greenhouse crops by leveraging robotics, computer vision, and AI. Our LUNA system is deployed at greenhouses in more than 15 countries, providing critical information like yield forecasts, pest detection and germination rates to growers on mobile and web platforms. By increasing yield and reducing waste, we're building a sustainable future full of delicious vegetables! As a Senior Mechanical Engineer in Robotics at IUNU, you will design, develop, and improve robotic systems that operate with a high degree of reliability in the challenging environment of a greenhouse. You possess an in-depth understanding of mechanical system design for harsh industrial environments such as IP67 waterproofing, high thermal loads in varying ambient temperatures, and significant vibration exposure. You combine your technical abilities with leadership skills to establish high standards of reliability and accountability for our fleet in the field, and you have experience maintaining those standards in production. Your curiosity and passion for engineering drive you to work cross-functionally, fostering a collegial and collaborative engineering culture. Responsibilities: • Design, develop, and improve IUNU robotic systems and deployments across multiple product lines, • Establish a high standard for the mechanical components of our robots and hardware installations with a focus on reliability, safety, and consistency, • Maintain system design schematics for production and prototype robots, and develop documentation for assembly and deployment, • Identify and manage opportunities to improve manufacturing (in-house and contracted) with respect to cost, timeliness, and quality, making the appropriate recommendations and tradeoffs as necessary, • Manage the complete lifecycle of engineering documentation, including authoring and maintaining precise engineering drawings, Bills of Materials (BOMs), and build processes, while driving quality improvements through the rigorous execution and approval of Engineering Change Notices (ECNs), • Work closely with electrical, firmware, application, and other mechanical engineers to efficiently size, groom, and prioritize work items in an Agile environment, • Excel in high-pressure situations, providing immediate troubleshooting and triage for urgent production, field, and manufacturing problems against tight, mission-critical deadlines., • Participate in accelerated testing of components for determining MTBF, lifespan, maintenance cycles and the associated acceptance criteria based upon business needs, • Open to travel 10%Requirements:, • Bachelor’s degree in Mechanical Engineering, Mechatronics, Robotics, or related technical field with typically a minimum of 3 years of related experience, • Experience creating parts using best practices, creating and working with large assemblies and structural analysis in SolidWorks, • Strong experience creating detailed engineering drawings and documentation (fully dimensioned part drawings, assembly drawings with BOM, exploded views, etc.) with a firm grasp of GD&T principles per ASME Y14.5M., • Solid understanding and application of principles, concepts, theories, and techniques in mechanical engineering, • Experience converting non-technical inputs into objectively verifiable engineering requirements that create a product that delights the customer, • Ability to quickly turn a finalized design into a physical prototype by producing engineering drawings, sourcing suppliers, working through procurement challenges, and leading final assembly on compressed timelines, • Ability to write clear and comprehensive technical documentation and assembly instructions, • Detail-oriented with excellent critical thinking, communication, time management skills and multitasking abilities., • Data-driven problem-solving skills to troubleshoot, triage, and fix mechanical, electrical, and software issues within production, design, and manufacturingDesired:, • Master’s degree in Mechanical Engineering, Mechatronics, Robotics, or related technical field, • Experience with mechanical engineering in a regulated industry such as aerospace or medical, • Prior robotics hardware implementation experience, • Experience with production level design, DFA, DFM, • Experience in designing and developing core electronics for robotic applications, including rechargeable battery power systems (BMS, charging circuits), power distribution, motor control, schematic capture, and PCB layout., • Experience in the hands-on integration of complex electromechanical systems, including the selection of sensors (LiDAR, IMUs, cameras) and actuators, and the design of robust wiring harnesses., • Experience in implementing and managing system-wide communication using ROS and a variety of industrial and wireless protocols (e.g., EtherCAT, CAN bus, Wi-Fi) over a standard TCP/IP network., • Hands-on experience with additive manufacturing practices and operating associated hardware, • Ability to read and create electrical schematics or PCB layouts, • Basic experience with Python, C++ and Linux environments using command-line interfaces, • Experience in low- to medium-volume manufacturing environments involving large products, • Six Sigma training / certification, • Experience designing, implementing, and testing both static and dynamic systems, • Experience working within an early/growth-stage startup team, • Experience leveraging AI tools to automate repetitive tasks and optimize workflows, resulting in a significant improvement in operational efficiency.We’re looking for a candidate who values transparency in communication and is comfortable documenting and troubleshooting issues. You should be able to communicate effectively with team members, including summarizing design decisions, test requirements and root cause analysis. You are able to write design, assembly and maintenance documentation and present them in a logical manner. You are comfortable with ambiguity and want to work in a fast-paced startup environment. Diversity: At IUNU, we’re committed to providing a safe and inclusive environment. We are dedicated to the happiness and success of all of our employees, and strive to foster a workplace in which individual differences are recognized, appreciated, nurtured, and respected. Diversity is important, and we strongly encourage people of all identities and backgrounds to confidently apply for a job with us if this is a role that interests and excites you. We want you to feel comfortable bringing your whole self to work with you, with all of your talents and strengths. Powered by JazzHR N1j6dZqOnE

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position:Lead Customer Engineer-Power Solutions Location: Bay Area, CA SUMMARY:Our customer's success depends on our ability to solve their technical challenges in relation to power and provide interconnect power solutions. We value our relationships with these companies and depend on Customer Engineers to foster this ongoing partnership. As a Customer Engineer you will interface with our customers, internal product development, product marketing and sales teams, performing as an extension of the power engineering team. Amphenol is results driven company that allows its employees a large degree of freedom to achieve pre-defined goals. It is a flexible working environment, yet we expect hard work, commitment, and results in return. The role of Customer Engineer gives an excellent insight into the Sales, Marketing and Product Development functions of the organization RESPONSIBILITIES: • Work with customers to develop solutions that address their needs and satisfy the technical requirements related to power solutions, • Accurately access customer's needs, matching them with current products or propose modifications to current products and/or propose new product concepts for further development by engineering team, • Product knowledge Ability to provide the best solution, • Create models and/or technical presentations to propose concepts and solutions, • Proficient in internal systems: Windchill, product configurators, etc., • Provide key engineering documents: drawings, product specifications, lab test results, plating analysis etc., • Know business unit capabilities (Engineering, Thermal, MFG, Test labs), • Engage thermal engineering and simulation teams when needed to support; facilitate lab testing to support design proposals, • Show competence / expertise on the company and its products, with the ability to identify and communicate emerging trends in marketplace, • Help devise strategies to differentiate our products and solutions from our competitors, • Develop a trusted adviser relationship with engineering teams of key customers, • Lead and/or participate in new product Voice of Customer activity, • Meet and exceed strategic objectives, • Bachelor's Degree in Mechanical Engineering or a related technical field, • Minimum of 2 years proven experience providing technical support to produce design wins within the connector industry, • Proficient in 3D modeling and Product Data Management (Ex: Creo and Windchill), • Some knowledge of server/storage/networking/data center rack level architectures preferred, • Excellent verbal and written communication skills ability to communicate within a Global organization to technical and non-technical audiences and at various levels of the organization, • Strong organization and presentation skills, • High level customer service and ability to build relationships with customers, • Proficiency with Microsoft Office Products