Trabajos online delivery en DerbyCrear alertas

Design Team Leader - Gas Turbines Are you an experienced engineering professional ready to lead a high performing team at the forefront of Gas Turbine (GT) Propulsion technology? Belcan are looking for a Design Team Leader who brings technical excellence, strong leadership, and a passion for delivering high quality engineering solutions to be based at the Derby office. As a Design Team Leader, you will be the direct supervisor of a team of skilled engineers, guiding them through technical challenges and driving engineering delivery to the highest standards. This role blends deep technical expertise with hands on leadership, ensuring both technical governance and smooth project execution. You'll play a key role in shaping engineering quality, supporting your team through mentoring and technical oversight, and stepping in to resolve complex, escalated issues when needed. This position sits within the Gas Turbine (GT) Propulsion business unit, where you'll work in a fast-paced Engineering Services environment. You'll balance technical responsibilities with commercial awareness and project timelines, supporting efficient, high-quality delivery. you will create, update and maintain designs. Responsibilities • Lead, manage, and mentor a team of engineers within GT Propulsion design., • Provide technical governance, ensuring policy, process, and best practices are consistently applied., • Deliver engineering studies, reports, designs, and reviews with a focus on quality and efficiency., • Support escalated problem resolution and guide the team through complex technical challenges., • Ensure alignment between engineering output, commercial objectives, and project schedules., • Work independently while fostering development and technical growth within the team. Qualifications and Experience • Degree qualification in Aeronautical, Mechanical Engineering or applicable work experience in turbomachinery design., • Previous Gas Turbine Systems and Turbomachinery Aero Design experience, • Design for Manufacture (DFM), • Preparation and review of engineering studies, reports, and presentations, • Prior experience leading engineering teams (formal or informal), • Strong organisational and communication skills., • Ability to make technical presentations internally and to customers., • Excellent written and verbal communication skills., • Must be able to work with customers to define and document requirements, address technical concerns and provide project status. What is in it for you if you join? We offer a competitive base salary, work/life balance, continuous personal development and training, Pension Scheme, Private Medical Insurance, Life assurance, 25 days of holiday + 8 days Statutory Holidays, 24/7 mental health hotline / online GP, discounted gym membership, virtual physio / gym classes, access to nutritional advice, discounted eye care, and free financial advice service. Salary sacrifice car scheme. You'll also be joining a supportive team that values your contributions and is committed to your professional growth. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security. This vacancy is being advertised by Belcan.

KM Recruitment is a specialist UK wide recruiter for the Skills and Employability sectorsJob Title: AAT Assessor / TrainerLocation: Hybrid Role (Home / field based) - Must be flexible with travelSalary: up to £35,000 (depending on skills and experience)Type: Full-time, PermanentDuties: • Assess and coach Apprentices who are undertaking Apprenticeships in Accountancy (Level 2) and Employability Practitioner (Level 4)., • Deliver full training and support learners through their Functional Skills Maths and English to Level 2., • Record professional discussions on specific units / topics based on knowledge, independent research and reflective accounts., • Delivering both remotely and face to face, • Managing your diary efficiently to ensure timely reviews are conducted., • Organise and maintain documentation on learners' progress., • Overcome barriers to learning and adapt delivery to meet learner’s needs., • Work to learner review and completion timescales.Essential Criteria:, • Must hold a recognised Assessor award (D32/33, A1, CAVA or TAQA)., • Must have solid occupational experience within the Accountancy sector., • Experience of providing advice and guidance., • Confident to deliver Maths and English Functional Skills to learners., • Excellent IT skills and confident with the use of IT and online systems., • Full, clean driving licence, and use of a vehicle (Must be flexible with travel, as and when required).Please note:KM Recruitment receive a high number of applications for each role advertised and although we would like to we are not always able to deliver feedback to unsuccessful candidates. If you have not been contacted within 4 days then unfortunately your application has been unsuccessful. Thank you for your interest and keep an eye on our website for future opportunities.

Gas Engineer – Service & Repair Engineer | Derby What We Offer • £29,899.09 base salary + expected earnings up to £45,000, • Full-Time, Permanent Contract, • Annual Pay Review & Profit Share Scheme, • Fully Costed Van & Fuel Card (EV options with free home install), • Renewables Upskill Potential, • Employee Energy Allowance & Discount on HIVE Products, • Company-Funded Healthcare + 24/7 Online GP Service, • Company-matched Pension scheme, • 25 Days Holiday + Bank Holidays, • Full Sick Pay after successful probation, • Life Assurance, Income Protection & Accident Insurance, • Exclusive Retail Discounts & Financial Education Support Your role You will be carrying out repairs and maintenance in domestic Social Housing properties, aiming for first-time fixes with the support of our 24/7 network What we need from you • Hold a valid UK driving license with no more than 6 points, • Hold the Right to Work in the UK, • Hold 2 year’s minimum qualified experience, • Be ACS qualified, including CCN1, CENWAT, HTR1, & CKR1, • Exhibit knowledge of all procedures and safety measures to PH Jones and British Gas standards whilst offering excellent customer service PH Jones was formed in 1963 and has continued to grow through the provision of excellent customer service, high quality delivery and an unrivalled focus on customer care. PH Jones was acquired by British Gas in 2011 and is a key member of the Centrica Plc, a FTSE 100 company. At Centrica we embrace diversity and actively seek to attract individuals with unique backgrounds and perspectives. To build a more sustainable future, we need the best team – a team with a diverse mix of people and skills, where everyone feels welcome and able to succeed.

Design Team Leader – Gas Turbines Are you an experienced engineering professional ready to lead a high performing team at the forefront of Gas Turbine (GT) Propulsion technology? Belcan are looking for a Design Team Leader who brings technical excellence, strong leadership, and a passion for delivering high quality engineering solutions to be based at the Derby office. As a Design Team Leader, you will be the direct supervisor of a team of skilled engineers, guiding them through technical challenges and driving engineering delivery to the highest standards. This role blends deep technical expertise with hands on leadership, ensuring both technical governance and smooth project execution. You’ll play a key role in shaping engineering quality, supporting your team through mentoring and technical oversight, and stepping in to resolve complex, escalated issues when needed. This position sits within the Gas Turbine (GT) Propulsion business unit, where you’ll work in a fast-paced Engineering Services environment. You’ll balance technical responsibilities with commercial awareness and project timelines, supporting efficient, high-quality delivery. you will create, update and maintain designs. Responsibilities • Lead, manage, and mentor a team of engineers within GT Propulsion design., • Provide technical governance, ensuring policy, process, and best practices are consistently applied., • Deliver engineering studies, reports, designs, and reviews with a focus on quality and efficiency., • Support escalated problem resolution and guide the team through complex technical challenges., • Ensure alignment between engineering output, commercial objectives, and project schedules., • Work independently while fostering development and technical growth within the team. Qualifications and Experience • Degree qualification in Aeronautical, Mechanical Engineering or applicable work experience in turbomachinery design., • Previous Gas Turbine Systems and Turbomachinery Aero Design experience, • Design for Manufacture (DFM), • Preparation and review of engineering studies, reports, and presentations, • Prior experience leading engineering teams (formal or informal), • Strong organisational and communication skills., • Ability to make technical presentations internally and to customers., • Excellent written and verbal communication skills., • Must be able to work with customers to define and document requirements, address technical concerns and provide project status. What is in it for you if you join? We offer a competitive base salary, work/life balance, continuous personal development and training, Pension Scheme, Private Medical Insurance, Life assurance, 25 days of holiday + 8 days Statutory Holidays, 24/7 mental health hotline / online GP, discounted gym membership, virtual physio / gym classes, access to nutritional advice, discounted eye care, and free financial advice service. Salary sacrifice car scheme. You’ll also be joining a supportive team that values your contributions and is committed to your professional growth. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security.

Business Management and Digital Marketing Lecturer Department: Academic Locations Available: Derby Position Type: Permanent - 2x Full-Time positions Working Hours: 37.5 hours per week Working Pattern: Monday to Friday Reports To: Course Director Job Overview UK Management College is seeking an enthusiastic and knowledgeable Lecturer in Business Management and Digital Marketing to deliver high-quality teaching across business and digital marketing modules. The postholder will contribute to an engaging learning environment, support student achievement, and ensure curriculum content reflects current industry practice and academic standards. Key Responsibilities Teaching and Learning • Deliver lectures, seminars, and workshops across Business Management and Digital Marketing modules., • Develop and update teaching materials to ensure academic quality and industry relevance., • Encourage student participation, critical thinking, and applied learning., • Provide timely, constructive feedback on student assessments. Assessment and Student Support • Design, set, and mark assessments including coursework, projects, and examinations., • Supervise student projects and provide guidance on business and digital marketing campaigns., • Provide academic guidance and pastoral support as a personal tutor. Professional Practice and Industry Engagement Quality Assurance and Administration • Contribute to curriculum development, review, and quality assurance processes., • Complete academic administration including attendance monitoring, assessment submission, and record keeping., • Participate in academic meetings and College activities in line with policies and procedures. Person Specification Essential: • Master’s degree in Business Management, Digital Marketing, or a related discipline (PhD preferred)., • Teaching qualification or willingness to achieve one., • Experience teaching in higher education and/or significant professional experience in business or digital marketing., • Experience with industry-standard tools such as Google Analytics, social media analytics platforms and/or CRM systems., • Knowledge of web development or web design principles, including website design, user experience (UX) and/or basic front-end development, as part of digital marketing practice., • Strong knowledge of digital marketing tools, analytics, and online campaign management., • Excellent communication and interpersonal skills., • Competence in using digital learning platforms and educational technologies., • Commitment to equality, diversity, and inclusion., • Passion for teaching and student success. Benefits • Competitive salary and benefits package., • Opportunities for professional development and career progression., • Access to academic resources and support networks., • Supportive and inclusive academic community.

Please apply online via the link provided.Regeneration Manager Full time Basis : Full time - Permanent Location : The Council House Sunday 31st May 2026 Do you want to contribute to the delivery of ambitious city centre regeneration projects? As a Regeneration Manager, you will play a cen

Please apply online via the link provided.Regeneration Manager Full time Basis : Full time - Permanent Location : The Council House Sunday 31st May 2026 Do you want to contribute to the delivery of ambitious city centre regeneration projects? As a Regeneration Manager, you will play a cen

Please apply online via the link provided.Regeneration Manager Full time Basis : Full time - Permanent Location : The Council House Sunday 31st May 2026 Do you want to contribute to the delivery of ambitious city centre regeneration projects? As a Regeneration Manager, you will play a cen

MHE DRIVERS REQUIRED - FULL-TIME ONLY! We are recruiting for various MHE Operative Roles - Reach Truck in DHL PERKINS Engines. Our client is seeking MHE drivers for their busy, rapidly expanding site. DHL handles the warehousing and transportation of Perkins products, ensuring global delivery of engines and parts. Perkins focuses on producing 4000 series engines in Stafford and various diesel/gas engines for agricultural and industrial applications worldwide As a MHE Driver you will need to have: Strong familiarity with Manual Handling Equipment (MHE) and safe, fast-paced operation Ability to read, write, and speak English to a level required for safety and reporting Strict adherence to safety regulations and operating procedures High attention to detail for picking and stacking, with the ability to maintain speed in a fast-paced environment A Reach Truck is REQUIRED Details: Salary: Days - £13.89 Afternoons - £15.14 Working Hours: Monday to Friday 07:00-15:00 Potentially 15:00-23:00 Location: Own transport required DHL Supply Chain, Perkins Engines, Unit 2 SEGRO Logistic Park, Hall Farm Road, Kegworth/Derby, DE74 2BF Duration: Ongoing Role of a MHE Driver: Operating a MHE truck to pick, load and unload goods Picking/Loading/unloading stock on the warehouse racking Moving stock around the warehouse to make space for new products arriving Operating MHE trucks Manually loading/off-loading smaller stock items Working as a team to meet targets in all areas of the warehouse Handling and storing materials safely and efficiently Picking and packing orders according to company standards Assisting with general warehouse duties as required Maintain high levels of Health and Safety awareness and report any areas of concern immediately Assist with inventory counting and stock investigations when necessary Support Colleagues and Team Leader with all day to day tasks Benefits of working with us as a MHE Driver : 28 Holidays per year Weekly Pay Pension Scheme Mortgage references My Extra Rewards- An online portal offering vouchers and discounts If you are interested in the above role please click apply If you are looking to contact our onsite team, please visit the site locator on our website. Job&Talent do NOT charge any fees for our services. Job&Talent acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. TPBN1_UKTJ

Job DescriptionJob Title: Power Beam Welding Engineer - SubmarinesWorking Pattern: Full timeWorking location: Derby (Raynesway)What you will be doing:You will influence how electron beam technology affects manufacture of key components that sit within the heart of the Submarines Pressurised Water Reactor system by ensuring the selection of appropriate welding techniques, processes and procedures. With quality, simplification and delivery at the forefront of your mind, you will drive continuous improvement projects from initial concepts to final completion and implementation, liaising with the wider Manufacturing and Engineering teams to collaboratively deliver the right outcomes for the business.Why join Rolls-Royce?At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere.By joining Rolls-Royce, youll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture.What you will be doing: With this exciting opportunity you will get a chance to be involved with the following:Using your existing Electron beam or Laser welding knowledge to develop Welds in complex assemblies and take them through Qualification, Production implementation and improvement.Drive continuous improvement projects from initial concepts to final completion and implementationPlay a key role in ensuring an uninterrupted manufacturing plant.Support a mixture of emergent shop floor issues, from product non-conformance, root cause investigations and cell performance, to supporting welders and managing Welder Qualifications in line with industry and internal standardsSupport manufacturing meetings and reviews with the goal of ensuring SQCDP metrics are on target and in line with business requirements.Liaising with the wider Manufacturing and Engineering teams to provide expertise and knowledge is vital within this role.Who were looking for:At Rolls-Royce embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles.To be successful in this role you will need to meet the following criteria:Prior experience in electron beam or laser processing (welding, additive manufacture, cladding, cutting/drilling).Strong analytical capability and sound judgement; broad technical background.Experience with special processes such as welding, NDE, or heat treatment.Proven ability to conduct root cause investigations involving fundamental process data as well as consideration of human factors. Competence in developing special process data cards and implementing associated process controls.Experience working with high-integrity products in highly regulated industries.Awareness of and commitment to product safety.Professionally Qualified Engineer (e.g. UK minimum HND/foundation degree or other national equivalent) in an engineering discipline.Desirable skills and experience:Professional welding qualifications (e.g. International Institute of Welding (IIW) / European Welding Federation (EWF) Welding Engineer or Technologist status, IEng or Ceng status, NVQ in welding, MSc Welding Engineering)For more than 60 years Rolls-Royce Submarines has designed, supplied and supported the nuclear propulsion plant, providing power for all UK Royal Navy nuclear submarines. To work for Rolls-Royce Submarines an individual must hold a Security Check clearance. We will support the application for Security Clearance if you dont already have it. Due to the nature of work we conduct, we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national.Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too.Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive.As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided.Job CategoryManufacturing EngineeringPosting Date06 May 2026; 00:05Posting End Date14 May 2026PandoLogic. Keywords: Welding Engineer, Location: Derby, ENG - DE23 8YH

Please apply online via the link provided. Regeneration Manager Job reference: 000012147 Working Pattern: Full time Salary: Grade K - £46,142 to £49,282 per year Contractual hours: 37 hours per week Basis: Full time - Permanent Location: The Council House Closing date: Sunday 31st May 2026 Job description Do you want to contribute to the delivery of ambitious city centre regeneration projects? As a Regeneration Manager, you will play a central role in shaping Derby’s future. This is an exciting opportunity to make a meaningful impact by facilitating the ongoing regeneration of the city’s cultural, economic, residential and public realm offer. You’ll join our dynamic, multi‑disciplinary and recently expanded Regeneration and Economic Growth Team that is advancing a diverse portfolio of major city centre schemes. From landmark developments at the Market Place, Becketwell and Castleward, to a suite of public realm and place-making improvements, to supporting the delivery of development sites, the team is at the forefront of city centre growth. If you thrive in a delivery‑focused environment; understand drivers of regeneration and development; enjoy managing complex projects; feel passionate about identifying and making the case for new opportunities; and have experience working in partnership with public and private sector stakeholders to unlock and maximise development opportunities, you would be a great candidate for this role. Becoming a Regeneration Manager will provide opportunities for you to make a lasting impact in Derby and support you to advance your career. Who We Are Here at Derby City Council, we’re dedicated to delivering nearly 250 first-class services to citizens and businesses in the heart of the Midlands. People are at the centre of all that we do, and we have an outstanding track record of recruiting and developing talented individuals by providing them with varied and fulfilling career opportunities. Find out more about what it’s like to work for us. What We Offer You too could be part of something brilliant by becoming a colleague at Derby City Council; in addition to making a difference to the lives of people across the city, you’ll also receive: • Flexible work/life balance scheme., • Hybrid working., • Modern office environment., • Continued professional development opportunities & career conversations., • 27 days annual leave (rising to 32 days after 5 years' service), plus bank holidays., • Local Government Pension Scheme., • Team Derby Rewards – retail and leisure discounts., • Tusker Car Benefit Scheme., • Cycle2Work Scheme & free cycle training., • Employee Assistance Programme, Wellbeing Calendar and Support., • Access to our Equality Employee Networks – LGBTQ+, Disabled Employee Network & Carers and our Black, Asian & Minority Ethnic Employee Support Network and Neurodiversity Network. In the role of Regeneration Manager, here’s an example of what you’ll be doing to make an impact: • Leading and coordinating regeneration projects from concept through to delivery, ensuring they progress smoothly., • Build effective relationships with internal colleagues, public and private sector partners and other relevant stakeholders to bring together expertise to keep projects advancing., • Managing and procuring contracts with consultants to ensure work is commissioned effectively and delivered to a high standard., • Overseeing budgets, risks, timelines and monitoring indicators so that projects remain financially sound, well‑planned and on track., • Developing business cases, delivery plans and visioning plans to provide advice that guides the Council’s regeneration priorities. To be successful in this role, you’ll ideally have... • A degree‑level qualification, or equivalent experience, in a regeneration, planning, property or other development-oriented subject., • A solid understanding of how regeneration, development and place‑making work in practice, including the planning process, factors that influence successful schemes and the ability to pre-empt problems., • Strong organisational and project management skills, with the ability to manage budgets, risks, timelines, stakeholders and competing priorities in a delivery-focused environment., • Strong leadership skills with experience coordinating relevant projects through managing consultants and working in partnership with stakeholders to move projects forward. Equality, Diversity & Inclusion We are a fair and inclusive employer and welcome applications from people from all backgrounds. We recruit for diversity and value difference. As many of our roles can now be home-based, we are able to offer more opportunities for people who need this facility. We are proud to be a Disability Confident Leader. If you are a disabled person, you have the choice to apply under our Guaranteed Interview Scheme so long as you demonstrate that you meet the essential requirements for the job. We feel it is essential that we recruit a talented workforce that is as diverse as the community we work for. Please let us know of any individual requirements or reasonable adjustments you may have during the application, interview, or onboarding process and we’ll do all we can to help. We strongly believe in social understanding of disability and for us it’s all about removing barriers to equality. If you have any questions regarding this vacancy or are having difficulty applying, please contact our Recruitment Team on 01332 640844 (Relay UK - 18001 01332 640 844) or at ___

Motorclean is avehicle preparation company that provide valeting and various services to car companies across the UK. We are seeking a super skilled and enthusiastic Self Employed Valeting Team Leader/Quality Controller to lead our team of valeters and ensure successful result delivery in a fast-paced car valeting site in Burnaston . The purpose of this role is to support the Area Manager in the daily running of the customer site, working with a team of valeters to ensure all vehicles are presented to the utmost quality. This position will be a perfect fit for someone who enjoys working in an active, physical role and has meticulous attention to detail. Type: Self-Employed Pay: Day rate of £130 Hours: Monday- Friday 07:00-16:00 Key Duties: Communicate / Report to the Area Manager daily. Coordinate and delegate daily tasks to the workforce. Ensure all vehicles are valeted to the highest standards, using branded equipment and products. Perform throughout inspections on the cars to ensure they meet the company standards and are in a safe condition at all times. Report any mechanical or safety issue immediately upon detection. Use our online system to book, track and report on vehicles. You must comply with Health & Safety procedures and ensure the site and all valeting equipment and machinery are properly maintained and secure at all times, report any defects immediately and comply with manufacturers instructions and PPE recommendations. Other duties to support the Branch as and when required. Skills and Experience: Valid Full Driving Licence (no more than 6 points). High level of attention to detail. Positive attitude with an excellent work ethic. Strong communication skills. Professional Car Valeting experience. We are committed to nurturing a culture where all of our colleagues feel included and valued at work. Our aim is to make sure that everyone is happy to be part of the team. If you are a passionate, detail-orientated car enthusiast who strives to go above and beyond for customers and wish to be considered for this role, please apply now with an up-to-date CV or contact our Recruitment team to discuss further. TPBN1_UKTJ

Location: Derby Job Type: Full Time, Permanent Hours: 38 hours per week (Mon-Fri) Salary: £33,000 and £37,000 per annum (dependant of experience and skills) Benefits: Company Pension - matched contribution scheme, Westfield Health care plan - after 3 months. 25 days paid annual leave plus all UK Statutory Bank Holidays. We have kitchen facilities on our site and provide free tea and coffee for our employees. Do you want to continue your training and development? At RH Aero Systems (HYDRO Systems) we are committed to supporting you in your continuous technical and professional development to enable you to keep your skills and knowledge up to date and to support you in your advancement within the business. About RH Aero Systems: RH Aero Systems is setting the standard for aviation support equipment and services. Through our industry-leading businesses - Rhinestahl and HYDRO Systems - we deliver capability across custom-designed Ground Support Equipment, OEM-licensed engine and airframe tooling, 26 global service centres and innovative engineered solutions for OEMs, MROs and Operators worldwide. RH Aero Systems’ global headquarters are in Mason, Ohio, USA, and Biberach, Germany. For further details visit our website. We take great pride in our Values and embody them in everything we do professionally. Reliable: We consistently deliver outstanding quality and performance. Our reliability builds trust and long last partnerships. You can count on us every step of the way! Ready: We are always prepared, flexible and within reach – ready to act when it matters most. Relentless: We are determined to pursue our goals with unwavering passion, resilience, and the will to overcome any challenge Our UK facility is co located on the Rolls-Royce campus on Victory Road, Derby, our largest UK customer. We are close to the A50, M1 and M42 and within a short commute time from Derby, Nottingham and Leicester. About the role: This is a fantastic opportunity for an individual who wants to develop their skills working in an expanding and fast paced and skilled team. The role of Production Planner will be responsible for creating, inputting and maintaining workload planning for the Machine Shop operation. This role will be responsible for efficient planning of work, resources are utilised effectively, and customer delivery commitments are met with additional daily administrative support for the Machine Shop. Key Duties & Responsibilities: Collaborate and be responsible for scheduling information with internal & external stakeholders to maintain clear communication and alignment. Validate and manage production plans, including releasing work orders and updating planning systems (SAP). Produce and communicate daily production priorities, highlighting risks, changes, and key focus areas. Respond to operational changes (e.g. downtime, urgent demand, quality issues) and escalate where needed. Prepare and present internal and external data when required. Development of detailed task lists and work schedule assessment based on capacities within each workstream Recommend and implement modifications to improve effectiveness and attain milestones. Manage materials ordering and supplier deliveries, ensuring stock availability and resolving any issues. Develop good working relationships with stakeholders to be able to embed the company’s control standards, systems and methods delivering accurate and quality project performance in a timely manner. Provide general administrative support to the Machine Shop including holiday cover within skill level when required. Any other reasonable duties as assigned by the management team. Expected Qualifications, Skills, Experience and Knowledge: Excellent computing skills across the Microsoft office suite. Use of ERP systems (ideally SAP) in a manufacturing environment. Experience of business-related administration. Experience of manufacturing capacity and work schedule planning (ideally within a machine shop environment). Excellent attention to detail and ability to identify anomalies in data. Ability to communicate effectively both written and oral. Goal orientated and task driven, able to work to tight deadlines within a pressurised environment, while remaining customer focused and maintaining accuracy of data. Flexible and adaptable with the ability to work alone and unsupervised as well as part of a team. Ability to manage own priorities and workload. Desirable Working knowledge of engineering drawings. Awareness of continuous improvement methodologies. REF-(Apply online only)

CISRS Instructor / Scaffolding Trainer An exciting opportunity for a qualified instructor with scaffolding expertise to deliver accredited training, coaching and assessment. You will support learning development, technical training delivery and health and safety standards. If youve also worked in the following roles, wed also like to hear from you: Scaffolding Instructor, Technical Trainer, Construction Instructor, Training Consultant SALARY: Competitive LOCATION: Derby, Derbyshire, East Midlands (with UK Travel) JOB TYPE: Full-Time, Permanent JOB OVERVIEW We have a fantastic new job opportunity for a CISRS Instructor / Scaffolding Trainer to deliver high-quality scaffolding and construction training programmes. As a CISRS Instructor / Scaffolding Trainer you will deliver accredited courses both at a dedicated training centre and on-site, ensuring compliance with industry standards and awarding body requirements. You will support learners through training, assessment and coaching. Working as a CISRS Instructor / Scaffolding Trainer you will contribute to course development, continuous improvement and maintaining high standards of health and safety, training delivery and professional practice. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CISRS Instructor / Scaffolding Trainer include: Deliver Training Courses: Provide CISRS accredited scaffolding training programmes to learners Maintain Standards: Ensure all training meets accrediting body and compliance requirements Support Learners: Offer guidance, coaching and mentoring throughout course delivery Assess Competence: Conduct assessments and provide constructive feedback to support development Drive Customer Satisfaction: Achieve positive learner feedback in line with performance targets Participate In CPD: Attend standardisation meetings and ongoing professional development Develop Training Content: Contribute to new course creation and continuous improvement Promote Health and Safety: Demonstrate strong commitment to safe working practices Follow Procedures: Adhere to organisational policies, quality standards and operational processes Support Team Growth: Collaborate with colleagues and provide technical input where required CANDIDATE REQUIREMENTS ESSENTIAL Level 3 teaching qualification or equivalent CISRS Advanced Card holder Level 3 First Aid at Work certification Proven experience in training delivery, coaching or instructional roles Strong communication skills with the ability to explain technical concepts clearly Experience supporting learners and providing constructive feedback Excellent organisational and time management skills Ability to prioritise tasks and manage competing demands Strong technical knowledge of scaffolding and construction practices Commitment to health, safety and environmental standards DESIRABLE NEBOSH National General Certificate Experience contributing to course development or training programmes Background in construction training, assessment or adult education Ability to support business development through technical expertise HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CVs of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14575 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Derby, Derbyshire, East Midlands. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ TPBN1_UKTJ

Product Trainer Location: Anywhere in the UK (ideally the Midlands) Job Type: Full Time Salary: £35,000 - £40,000 per annum Do you have an interest in military aircraft and supporting the teams that keep them safe and airworthy? Are you happy training both virtually and attending military bases across the UK to train our customers? If you answered yes to both, then this role might be for you! Our client is a UK technology company with team members based across the country. They solve through-life acquisition and support management issues for the Defence and related sectors, supporting their teams to work strategically, collaboratively and effectively to maintain and streamline the delivery of military and industrial capability. What’s In It For You 26 days holiday per year (excluding UK bank holidays), rising with long service All IT equipment necessary for your role and support for office equipment in your home is provided Life Assurance Free access to learning and wellbeing platforms such as LinkedIn and Headspace Health Shield (cash plan benefit scheme) Cycle to work scheme, tech scheme and lease car scheme Company pension Recruitment Referral Bonus Employee Recognition Reward Scheme Travel across the UK with regular overnight stays Requirements Essential A proven record of developing client relationships, maintaining high levels of customer service and delivering excellent quality training to customers Sound experience in undertaking a training needs analysis and designing/developing suitable training material, including User Guides Must be an excellent communicator, both verbally and in writing, with sound presentation attributes Highly focused and organised, able to prioritise workload Professional, articulate and confident when operating in the customer domain Flexible approach to work, able to work alone or as part of a team Must be able to achieve security clearance status Must have a full clean driving license and be happy to travel frequently with regular overnight stays (depending on base location) Experience in developing E-Learning and online help training material, e.g. Articulate Desirable Knowledge of the software development industry and Agile methodologies A relevant training qualification, e.g. the CIPD Certificate in L&D Practice A relevant technical authoring qualification A good understanding of the principles, guidelines and methods used in delivering and supporting military equipment and capabilities The Role Deliver modular Customer Product Training across the Company’s portfolio, which is to include face-to-face and online training packages with a choice of demonstration and interactive style courses, dependent on the customer’s request Create Training Material, E-Learning, Online Help and User Guides as required by the Training Needs Analysis, ensuring that all documentation meets the company branding guidelines Design and deliver internal training in new and existing product functionality to support employees’ development Ensure training materials are produced and maintained in a professional and timely manner to support the company's software delivery programme plan Ensure that integration of software releases is fully supported from a training perspective Establish and maintain an excellent relationship with the customer base and employees Assist with responding to customer training queries and the planning of future training events whilst maintaining the Training Schedule, Training Gateway and Inbox Schedule training system updates with IT Support, ensuring training delivery is presented on current functionality and latest releases Report on training statistics and feedback, and make recommendations where appropriate If required, assist with Sales Demonstrations, Marketing Events, and provide any other support to the business Report any potential business and product development opportunities to the Customer Account team What’s next? It’s easy! Click “APPLY” now! We can’t wait to hear from you! Your data will be handled in line with GDPR

Personal Academic TutorDepartment: AcademicsLocation: Derby CampusPosition Type: Permanent, Full-TimeWorking Hours: 37.5 hours per weekWorking Pattern: Monday to Friday with occasional weekend workingReports To: Student Support Manager / Academic LeadTravel Required: NoCompany DescriptionUK Management College (UKMC) is a growing higher education provider offering a range of business-focused and professional programmes. Our focus is on delivering practical, career-driven education that prepares students for real opportunities in industry. We work with experienced academics, established professionals, and industry partners to ensure our courses remain relevant, supportive, and high quality.Job DescriptionThe Personal Academic Tutor plays a key role in supporting student retention, progression, and satisfaction by providing first-hand academic and pastoral support. This is a student-centred role designed to coordinate and respond to the varied needs of students across their study journey and may include the delivery of workshops and other teaching-related activities.The postholder will act as an advisor and point of contact for students, working as a bridge between students, teaching staff, admissions, and student support services. The role is office-based and involves regular face-to-face engagement with students in a busy and fast-paced campus environment.Key Responsibilities Provide guidance to students regarding academic and support services available to them. Engage and motivate students, fostering confidence and enthusiasm for learning. Support students in building relationships with peers and staff, promoting belonging and engagement. Enable students to take responsibility for their learning, progression, and achievement. Develop and deliver teaching and learning support through lectures, tutorials, workshops, and online sessions where required. Monitor student progress and attendance, providing timely advice on study skills and performance. Analyse student difficulties and recommend immediate support or referral to appropriate services. Provide basic academic support inside and outside the classroom. Support students with submission deadlines, mitigating circumstances, and academic regulations. Maintain accurate records of student contact in line with GDPR and institutional policies. Work closely with student support teams to create a multi-dimensional support framework. Liaise with academic staff regarding non-submission and student retention processes. Proactively identify and escalate risks to student experience or institutional reputation. Actively participate in enrolment and induction activities. Act as an advocate for students where appropriate and contribute to reference requests. Comply with Equality, Diversity, Safeguarding, and Health & Safety policies. Undertake continuous professional development to support the role.Knowledge & Experience Minimum 1 year’s experience in a higher education teaching or academic support environment. Experience in tutoring or providing academic support to students. Understanding of academic regulations, mitigating circumstances, and student progression processes. Awareness of evidence-based teaching and learning practice. Experience working collaboratively with academic and professional services staff.Qualifications Bachelor’s degree from a UK-recognised university.Skills & Competencies Strong interpersonal and communication skills. Ability to manage multiple priorities and meet deadlines. Strong problem-solving and student-focused approach. Ability to work independently and as part of a team. Flexible, approachable, and professional manner. Strong organisational and record-keeping skills. Ability to work effectively in a busy and fast-paced environment. Commitment to safeguarding, confidentiality, and equality of opportunity.Benefits Company events Company pension Health & wellbeing programme Private medical insurance Career development opportunities Training and self-development

Design Team Leader - Gas Turbines Are you an experienced engineering professional ready to lead a high performing team at the forefront of Gas Turbine (GT) Propulsion technology? Belcan are looking for a Design Team Leader who brings technical excellence, strong leadership, and a passion for delivering high quality engineering solutions to be based at the Derby office. As a Design Team Leader, you will be the direct supervisor of a team of skilled engineers, guiding them through technical challenges and driving engineering delivery to the highest standards. This role blends deep technical expertise with hands on leadership, ensuring both technical governance and smooth project execution. You'll play a key role in shaping engineering quality, supporting your team through mentoring and technical oversight, and stepping in to resolve complex, escalated issues when needed. This position sits within the Gas Turbine (GT) Propulsion business unit, where you'll work in a fast-paced Engineering Services environment. You'll balance technical responsibilities with commercial awareness and project timelines, supporting efficient, high-quality delivery. you will create, update and maintain designs. Responsibilities Lead, manage, and mentor a team of engineers within GT Propulsion design. Provide technical governance, ensuring policy, process, and best practices are consistently applied. Deliver engineering studies, reports, designs, and reviews with a focus on quality and efficiency. Support escalated problem resolution and guide the team through complex technical challenges. Ensure alignment between engineering output, commercial objectives, and project schedules. Work independently while fostering development and technical growth within the team. Qualifications and Experience Degree qualification in Aeronautical, Mechanical Engineering or applicable work experience in turbomachinery design. Previous Gas Turbine Systems and Turbomachinery Aero Design experience Design for Manufacture (DFM) Preparation and review of engineering studies, reports, and presentations Prior experience leading engineering teams (formal or informal) Strong organisational and communication skills. Ability to make technical presentations internally and to customers. Excellent written and verbal communication skills. Must be able to work with customers to define and document requirements, address technical concerns and provide project status. What is in it for you if you join? We offer a competitive base salary, work/life balance, continuous personal development and training, Pension Scheme, Private Medical Insurance, Life assurance, 25 days of holiday + 8 days Statutory Holidays, 24/7 mental health hotline / online GP, discounted gym membership, virtual physio / gym classes, access to nutritional advice, discounted eye care, and free financial advice service. Salary sacrifice car scheme. You'll also be joining a supportive team that values your contributions and is committed to your professional growth. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security. This vacancy is being advertised by Belcan

Candidates should hold a Level 3 teaching qualification, CISRS Advanced Card, and have experience in a training delivery role.

With significant growth across our grocery Home Delivery and Click & Collect services, the Digital Planning Team plays a vital role as we continue to expand, innovate and respond to the evolving needs of our customers, our business and the wider online delivery market. Responsible for owning the bud

NECSWS in the United Kingdom is seeking a dedicated Training Specialist to deliver exceptional training programs across various formats.The role involves conducting training needs analysis, designing and maintaining training materials, and evaluating training effectiveness.Candidates should have str

Take ownership for key deliverables across the delivery lifecycle and apply appropriate methodologies to support the achievement of wider aims and objectives:. Own and maintain the comprehensive plan, risk & issue logs using PMO delivery tool Planview. Manage schedule and resource dependencies, supp

Manage schedule and resource dependencies to support predictable delivery cadence. Coordinate the definition and delivery of detailed business requirements with the business, IT and third parties. We’re looking for someone to work alongside our Digital and Online teams to deliver projects and back

This role involves managing the online delivery driver labor budget, analyzing performance data, and collaborating with operational teams. A leading grocery retailer in Greater London seeks a Delivery Planning Manager for a 9-12 month contract.

A leading UK retailer is seeking a Store Manager to oversee store operations and lead a dedicated team.This hands-on role requires experience in retail management, excellent leadership skills, and the ability to drive operational standards while delivering exceptional customer service.The position o

As an Online Team Leader you’re the driving force behind our in-store Online team and as part of your role you will:. Strong operational and technical knowledge of the Online department. We're looking for Team Leaders to lead our in-store Online teams and drive our performance forward for our cust

Pertemps Reading are looking for a Van Driver to work for one of their clients based in Bracknell.This is a temporary on-going position.As a Van Driver, you will be responsible for:.Delivering stationery and office equipment (30 to 40 drops/shift).Maintaining excellent customer service.Loading and u

As a Bank Housekeeping Assistant at a Barchester care home, you'll help to create a warm and homely environment that enables us to meet each resident's unique needs.Keeping the home clean and safe is no small task, which is why the role of a Bank Housekeeping Assistant is so important.The variety of

Senior Care Assistant - Chorleywood.At Avery Healthcare, we are all about supporting the people who care for our residents.We know how hard our teams work, and we're here to celebrate and support you every step of the way.When you join us, you'll be making a positive impact on residents' lives every

Please note that salary will be pro-rated for part-time and term-time hours.We have an excellent opportunity for a number of cleaning positions available across East Dunbartonshire within our Education and Corporate estate.There are a variety of full time and part time positions, including morning a

Join our award-winning school cleaning team.We’re proud of our award-winning service, recognised with:.ASSIST-FM Contribution to Cleaning Award - 2022.APSE Building Cleaning Innovation Award - 2023.Building Cleaning Most Improved Performance Networks Award – 2024.ASSIST – FM Contribution to Cl

Cleaner - Lilleshall, Shropshire.Lilleshall Sports Centre, Shropshire, TF10 9AT.Flexible to work between Monday to Sunday 6.Lilleshall Leisure Trust our goal is to encourage active, healthy lifestyles in an environment that is safe, warm, clean, friendly and fun.To be the destination of choice for b

Accommodation Cleaner - Hayling Island - Hayling Island, Hampshire .Job title – Accommodation Cleaner.Location – Meadow Bay Villages, Hayling Island Holiday Park, Hayling Island, PO11 0QS.Part Time, Seasonal, Mondays & Fridays with possible overtime.We are looking for part time accommodation

As a Cleaner for Tenpin, you will be responsible for ensuring our Customers have an.When it comes to keeping your site spick and span, we will need you to bring your 'A' game.We love to entertain! It's in our DNA!.We have lots more to offer from Houdini's Escape Rooms, to Karaoke rooms, 4D Laser Are

We're currently looking for individuals across the country to take part in online paid research, including remote focus groups, product trials, and consumer studies. Comfort participating in remote, online studies.

Become a Self-Employed Delivery Driver with Evri with our . Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri as a self-employed delivery driver working on a schedule that suits you. Opportunity to Earn) is based on a

Due to our continued growth, we now have an exciting opportunity for a.Glastonbury, Somerset, BA6 9XE!.Monday & Sunday, 09:00am - 12:00pm Tuesday, Wednesday & Friday (Thursday & Saturday OFF) - 14 hours per week.Vacuum/ sweep/ mop floor areas.Replenish soap, toilet rolls and hand towels.An enthusias

Become a Self-Employed Delivery Driver with Evri with our . Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri as a self-employed delivery driver working on a schedule that suits you. Opportunity to Earn) is based on a

Simply fill out an online application (no CV required), and our friendly recruitment team will be in touch!.

Become a Self-Employed Delivery Driver with Evri with our . Looking for a new role or a more flexible way to earn that fits around your lifestyle? Join Evri as a self-employed delivery driver working on a schedule that suits you. Opportunity to Earn) is based on a

Access to Our Place Rewards, offering a huge range of shopping discounts, instore vouchers, reloadable e-cards, cashback on online purchases, and many exclusive offers!.

Tardis Environmental UK Ltd are a well-established portable toilet and tanker hire business that operate a large fleet of HGV and LGV vehicles across various locations situated throughout the UK.We hire temporary waste and water solutions from 1000ltr waste and water storage tanks up to 30.Want to m

Experience is needed due to the nature of the work, along with delivery driverexperience, y.

Just click 'apply' and complete our online application form - it only takes a couple of minutes and you can start immediately! Who are Housekeep? We're the best agency for home cleaners.