Sustainability manager jobs in LutonCreate job alerts

📍Location: Dunstable 🕒Hours: 40| Working 5 out 7 days including weekends 💷Salary: £50000 🎉Why Superdrug? Passionate about Beauty and Health? Want to be part of an innovative, trend setting retailer? We’re a team that puts our customers and our teams at the heart of everything we do. At Superdrug, we aim to be the best in accessible health & beauty, loved by our customers for value, choice, friendly advice, service and fun. Our success comes from our people – they make the difference. We’re all about personality, we have fun, and we work hard to deliver That Superdrug feeling. 📅Here's the exciting bit… A day includes: An exciting opportunity has arisen to join the Superdrug Supply Chain team as a Transport Manager, based at our Southern Distribution Centre in Dunstable. The site plays a critical role in the network, picking and transporting stock to 1,033 stores through a combination of direct-to-store and trunking deliveries, supporting both Superdrug and Savers. The role is central to ensuring outstanding availability, service and cost efficiency across our retail estate. The Role You will join an established Transport Management team of four, collectively responsible for a 7‑day transport operation. With clear individual accountabilities and strong peer collaboration, the team delivers a resilient and well‑supported operation, underpinned by a wider transport management structure including a Transport Compliance Office (TCO) and Transport Team Leaders. As Transport Manager, you will be accountable for the safe, compliant, resilient, and cost‑effective delivery of your defined area of the transport operation, covering outbound store deliveries, inter‑distribution centre trunking, and movements to third‑party hubs. You will hold joint responsibility for the effective management and compliance of a UK Operator’s Licence covering up to 100 motor vehicles and 150 trailers. You will lead a mixed workforce of permanent and agency transport colleagues, driving high standards of service, safety, cost control, and continuous improvement. The role requires flexibility, including rota‑based weekend working, to support operational requirements and ensure business continuity. 📝Key Responsibilities: • Accountable for end‑to‑end transport performance within your defined area, delivering strong on‑time, in‑full (OTIF) results., • Act as Joint O‑Licence holder, ensuring full compliance with DVSA, Health & Safety and regulatory requirements., • Lead, engage and develop transport colleagues, embedding a strong safety and performance culture., • Own and control transport costs within your area, including agency spend, fuel, utilisation and productivity., • Manage agency and third‑party providers, holding them to agreed SLAs, cost and service standards., • Use transport systems, telematics and data to monitor KPIs and drive operational improvement., • Lead continuous improvement initiatives, improving service, safety and efficiency., • Support sustainability and ESG objectives, including fuel efficiency and emissions reduction., • Own elements of transport resilience and disruption planning, ensuring operational readiness for peak and unplanned events., • Work collaboratively with Transport Managers, Warehouse Management teams, Transport Planning, other Distribution Centres, and wider Supply Chain stakeholders to ensure seamless end‑to‑end execution. What we are looking for: Essential • Transport Manager CPC Qualification, • Proven experience leading and managing transport teams, • Previous experience as a HGV Driver 💡Here's what's in it for you: • 33 days holiday rising to 38 days with length of service (inclusive of bank holidays), • 2 staff discount codes for yourself and a family member or friend, • 30% discount on Superdrug Own Brand Products both in store and online, • Company pension matching and bonus, • We offer Stream - a money management app that gives you access to a percentage of your pay as you earn it, • Being part of more! We are part of a group who work closely with Savers, The Perfume Shop and Three UK, • We are part of A.S. Watson Group, the world's largest international health and beauty retailer with over 15,700 stores in 25 markets!, • Unrivalled Learning and Development programmes, • Enhanced maternity/shared parental/adoption leave, company sick pay and pregnancy loss and support, • Come and be part of something special!

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As Senior Research Engineer (Process Development) you will draw on your diverse engineering background and product lifecycle awareness to progress a variety of research activity in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders. Core operational hours at our Luton site are 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays. The role requires a willingness to undertake occasional national travel for customer meetings. There is also the opportunity to work from home for up to two days per week, subject to business needs. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s). Contribute to Technology Development Plans and Technology Business Cases within your project(s). Contribute to multi-year planning and internal/external funding proposals as required. Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant, accredited Engineering or Science based degree OR relevant industry experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Experience managing budgets on a work package level or smaller Work Streams. Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques. Good working knowledge of AS9145 APQP/PPAP requirements and tools supporting Zero Defect Manufacturing approaches. Good working knowledge of Lean manufacturing philosophies and Six Sigma / Statistical techniques for process control and problem solving. Logical and methodical approach to work package planning and costing. A strong self-starter, competent to work with general goal-based direction as well as more specific task-based requirements. Experience managing deployed resources (people you lead but you are not their line manager). Experience engaging with production teams and you can identify operational requirements and incorporate in to your project(s) as appropriate and as agreed. Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings Desirable: A higher degree qualification such as a Masters, PhD or EngD Chartered Engineer with a relevant institution Experience in Composite Manufacturing Processes We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. You may have budget accountability for a Work Stream or Work Package Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s) Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s) Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s) Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development. Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning. Experience managing deployed resources (people you lead but you are not their line manager). Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: A higher degree qualification such as a Masters, PhD or EngD General awareness of budget and schedule management. An awareness of aerospace certification requirements. Experience of the Systems Development Lifecycle process You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. We are seeking a Research Engineer to develop and mature manufacturing process technology to enable low cost, high rate and high-yield manufacturing of aircraft structures with embedded ice protection capability, with a focus on automation and digitalisation to drive innovation and manufacturing excellence. As this is a research role , we are looking for an innovative thinker, your work should push the boundaries of conventional engineering in terms of the design and integration of state-of-the-art manufacturing processes whilst appreciating aerospace certification requirements. Youll be comfortable travelling within the UK when needed, with occasional opportunities for international travel depending on programme demands. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s). Contribute to Technology Development Plans and Technology Business Cases within your project(s). Contribute to multi-year planning and internal/external funding proposals as required. Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques. Good working knowledge of AS9145 APQP/PPAP requirements and tools supporting Zero Defect Manufacturing approaches. Good working knowledge of Lean manufacturing philosophies and Six Sigma / Statistical techniques for process control and problem solving. A logical and methodical approach to task planning. Good report writing and presentation skills, able to support and present at internal and external technical and project review meetings. You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field. Desirable: A higher degree qualification such as a Masters, PhD or EngD Experience of working with and configuring PLCs (Siemens) Experience of working with and configuring SCADA systems. Proficient in operating and configuring industrial equipment, in particular ABB robotic systems including the use of Robot Studio software. As Research Engineer you should have a broad engineering knowledge and be an innovative thinker, being able to apply and combine engineering concepts from a number of disciplines including Manufacturing process selection, Industrial process control, Robotics, Digital engineering (data capture and analytics) and have an appreciation of Lean Manufacturing principles to be able to deliver cutting edge manufacturing solutions for the next generation of ice protection systems. The ideal candidate will have experience in equipment procurement, including Capex generation, equipment specification, supplier management, commissioning and buy-off. They will also bring working knowledge of AS9145 APQP/PPAPparticularly MSA, PFMEA and SPCalong with a general understanding of aerospace product certification and qualification requirements. As a Research Engineer , you will bring an adaptable approach to your work and be comfortable collaborating with colleagues across different areas of expertise to achieve project objectives. You will be naturally curious, proactively deepening your technical knowledge through study, experimentation, hypothesis testing and cross-functional collaboration.Your proactive mindset will enable you to quickly understand and adapt to new technology areas, while your strong communication skills will allow you to confidently engage with a wide range of internal stakeholders. This position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. TPBN1_UKTJ

Company description: GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Were looking for a Materials Development Research Engineer with a strong non-metallic materials engineering background, to support the production and development of next generation composite aero structures, ice protection and transparency products. You will draw on your diverse engineering background and product lifecycle awareness to progress a variety of research activity in the TRL1-6 range. The role will provide a deep understanding of the interactions between processing parameters and material properties of Acrylics, Polycarbonates and adhesives, being able to guide new technology test plans and process/product development. Occasional UK travel to customers and suppliers is required. Core working hours at our Luton site are 07:3016:30 Monday to Thursday and 07:3012:30 on Fridays. There is the opportunity to work from home up to two days per week subject to business needs. Job Responsibilities Development of manufacturing processes in relation to polymer, composite and adhesive materials Qualification of materials and processes to assure they comply with the requirements Support robust, manufacturing process technologies as applied to materials, Collect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements. Preparing and guiding tests/test plans; critical and systematic interpretation and analysis of test data. Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s). Contribute to Technology Development Plans and Technology Business Cases within your project(s). Contribute to multi-year planning and internal/external funding proposals as required. Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant, accredited Materials, Mechanical Engineering, Chemistry or Physics degree or relevant industry experience Experience in Polymer and Composite material science and processing Good general engineering/technology knowledge base and can demonstrate strategic thinking. Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques. Experience within an industrial engineering discipline, preferably within Aerospace/Automotive/Marine/Energy sectors Logical and methodical approach to work package planning and costing. Strong self-starter, competent to work with general goal-based direction as well as more specific task-based requirements. Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings Desirable: A higher degree qualification such as a Masters, PhD or EngD Chartered Engineer with a relevant institution Experience managing deployed resources (people you lead but you are not their line manager). Experience engaging with production teams and you can identify operational requirements and incorporate in to your project(s) as appropriate and as agreed. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Based at our Luton Manufacturing site as the Manufacturing Engineering Manager Tooling youll be working across both our Defence and Civil business lines. You will provide and lead a team of Tooling and Cad Engineers in the design, manufacture and maintenance and control of all Site Tools. This will involve the technical capability to create and design tools as solutions to support the manufacturing operations. Youll be accountable for delivering robust, capable manufacturing process technology as it applies to materials, tooling, part fabrication and assembly. The role involves the creation of significant tooling designs from initial concept through to production for the production of aircraft transparencies and Ice Protection Tooling, jigs and fixtures. Among other activities, this will include responsibilities for 4 large CNC machines on site and calibration of current and the development of new or existing tooling. Supporting Manufacturing Engineering teams may also be required. The successful candidate will be experienced in a relevant engineering discipline and have a hands on approach, be able to prioritise jobs, be comfortable liaising with suppliers and other departments. Furthermore responsibilities for Manufacturing Engineering Configuration control, using SAP and more traditional documentation such as Specifications and Routings. The role will also provide leadership, coaching and mentoring to a small team of Tooling Engineers on the Luton site, supporting the Manufacturing Engineering Managers in matters of staff performance and development. The role will also be responsible for the overall load and capacity management of the tooling team members and provide reports and updates on tooling work plans as required by the Manufacturing Engineering Managers and/or Site Head of ME. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. There is the requirement for flexibility for occasional travel in the UK. Job Responsibilities Exemplifying a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards. Responsible for the development and support with technical solutions to complex problems within GKN Aerospace environment, our customers and suppliers by utilizing root cause analysis, preventative and corrective action to reduce and support to eliminate non-conformances. Maintain positive, team relationships with internal and external customers, as well as co-workers Responsible for tool fabrication quotes, tooling design and input for new product quotes, tooling configuration changes that involve cost estimation and schedule coordination and New Projects Introduction support. Act as key interface between external tooling suppliers and internal customers such as Program Managers and Engineering Managers Manage and maintain Tooling Engineers workload, skill and development, EHS and welfare to ensure tooling work is sufficiently resourced by the business with appropriate metrics and KPIs Leadership of CNC Engineers and technicians to support production processes on large 5 axis CNC machines Configuration control of Manufacturing documentation to support operations, costings, BOMs routings and specifications. Creation, control and maintenance of master tooling registers for both customer and domestically owned tooling suites Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Technical expertise in Tooling solutions (Engineering), with a professional qualification (BEng, BSc, HNC) or strong background in engineering (Aerospace, Mechanical, or Automotive). Working knowledge of design for manufacture principles and tool/component manufacturing methods and able to provide technical input at all levels of work. Ability to create engineering drawings with an understanding of geometric tolerances and datum features. Organised and structured approach to tasks. Experience in tooling for composites and/or transparencies. Experienced in CAD 3D modelling and drafting (Catia V5). Understanding of inspection/calibration methods and interrogation of results. Be compliant with the Companys Environmental, Health & Safety and Energy procedures. Be proficient in English language, both written and spoken. Desirable: Project Management experience. Understanding of export control and compliance and security marking requirements. Working knowledge of quality system models such as ISO9000, AS9100, or D1-9000. Experience of New Product/process Introduction (Industrialisation) & existing production process improvements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineering Manager Tooling will have the ability to be agile and shift focus on competing priorities. The successful person will be a self-starter, able to manage own workload with excellent communication skills. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

QHSE Manager – Operational Health & Safety, ISO & Facilities Compliance Location: Bedfordshire Salary: Up to £60,000 + bonus Working pattern: Primarily site-based, with some flexibility once established An established, growing multi-site business is looking to appoint a hands-on QHSE Manager to take ownership of operational Health & Safety, ISO management systems and facilities compliance across its UK operations. This is a broad, practical role suited to someone who enjoys being visible on site and working closely with operational teams. The successful candidate will be responsible for maintaining safe working practices, supporting ISO compliance, improving site standards and ensuring key facilities and contractor controls are properly managed. This is not a purely strategic or remote QHSE role. It will suit someone who is comfortable combining management systems and compliance work with day-to-day operational activity such as inductions, risk assessments, contractor reviews, site inspections, H&S observations and incident follow-up. The role The QHSE Manager will act as the main internal point of contact for Health & Safety, ISO compliance and site/facilities-related controls. Responsibilities will include: Leading and improving day-to-day Health & Safety standards across operational environments Carrying out and reviewing risk assessments, safe systems of work, RAMS and site procedures Managing incident reporting, investigation, corrective actions and lessons learned Supporting site inductions, toolbox talks, employee awareness and H&S engagement Maintaining and improving ISO management systems, including ISO 9001, ISO 14001 and ISO 45001 Planning and supporting internal audits, external audits and corrective action follow-up Working with external consultants and certification bodies where required Managing contractor compliance, including RAMS review, inductions and safe working controls Supporting facilities compliance, including testing, servicing, inspections and maintenance records Overseeing key site compliance areas such as fire safety, emergency procedures, PPE, COSHH, first aid and statutory checks Working closely with operational managers to identify gaps and implement practical improvements Supporting environmental and sustainability initiatives at site level Maintaining accurate records, reporting and compliance documentation Visiting other UK sites as required, likely on an occasional/quarterly basis The person The successful candidate is likely to come from a QHSE, HSE, SHEQ, Health & Safety, Compliance or Facilities Compliance background. You will need to be practical, organised and confident working directly with managers, employees, contractors and external advisers. The role would suit someone who has enough breadth across H&S, ISO and facilities compliance, but who still enjoys being hands-on and operational. Essential / highly desirable experience NEBOSH General Certificate or equivalent Health & Safety qualification IOSH membership or similar professional grounding would be useful Experience in an operational Health & Safety role Exposure to ISO 9001, ISO 14001 and ISO 45001 Experience supporting or managing internal and/or external audits Strong working knowledge of risk assessments, RAMS, SOPs, incident investigation and safe systems of work Facilities compliance exposure, including testing, servicing, inspections, fire safety or statutory checks Experience in a warehouse, distribution, manufacturing, engineering, logistics, industrial or similar operational environment Strong communication skills and the ability to influence operational teams Comfortable being site-based and visible within the business Full UK driving licence Useful backgrounds Relevant sector experience could include distribution, logistics, warehousing, manufacturing, engineering, industrial services, facilities, building products, packaging, food production, electronics, construction-related environments or similar. Exact sector is less important than having experience in a practical, site-led environment involving people, equipment, contractors, operational risk and compliance. Package Salary up to £60,000 depending on experience, plus bonus scheme Primarily site-based role with occasional travel to other UK sites Some flexibility may be available once established Important note This role requires someone who is comfortable being hands-on and operational. It is unlikely to suit someone looking for a purely strategic, remote or senior leadership position with a team already in place

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Manufacturing Engineer will report to the Manufacturing Engineer Manager working across Civil and Defence business lines and based at our Luton site, occasional travel to visit equipment suppliers could be required. The Manufacturing Engineer will work across several value streams within GKN Luton and will be responsible for developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Design and implement high capability manufacturing processes using GKNs Zero-Defect Manufacturing (ZDM) tool suite, including the APQP Core Tools. Develop, document and optimise new and existing manufacturing processes such as creation/amendment of SOP (Standard Operating Procedure) and Process Specifications Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approvals. Provide day-to-day support to manufacturing operations. Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered Be compliant with the Companys Environmental, Health & Safety and Energy procedures. Manage large and complex projects from programme or customer approval through introduction to production and delivery to customer Identify, anticipate and offer solutions to technical problems Establish & improve production process controls Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC/HND qualification (or equivalent experience) in an engineering discipline, preferably Mechanical, Electrical, Industrial engineering. Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques Demonstrable experience of practical problem-solving techniques using A3 or 8D Knowledge of Configuration control processes High Level of technical writing and good communication skills Desirable: Experience of Lean Manufacturing including process standardisation kaizen activities such as 5S Manufacturing Engineering experience gained from the Aerospace Industry 6Sigma Qualification and experience Experience in composite lay-up processes Project Planning skills Automation experience using systems such as ABB CNC and CMM Knowledge We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Senior Manufacturing Engineer will initially report to the Manufacturing Engineering Manager, with daily leadership and support provided by the Team Leader. Working across Civil and Defence business lines and based at our Luton site, occasional travel to visit equipment suppliers will be required. The Senior Manufacturing Engineer will work on several value streams within current programmes developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production. Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, including the APQP Core Tools. Develop, document and optimise new and existing manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process Specifications Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approval Lead structured improvement activities to reduce process driven scrap and rework Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered Make presentations at senior level internally and externally demonstrating ability to clearly communicate to the audience Identify, anticipate and offer solutions to technical problems Establish & improve production process controls Comply with company Environmental, Health, Safety and Energy procedures. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/Aerospace Demonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry 6Sigma Greenbelt qualification Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques Demonstrable experience of practical problem-solving techniques using A3 or 8D Desirable: Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5S Experience in lay-up processes for composite materials Specification interpretation experience We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. We're hiring a Quality Assurance Auditor to be based at our Luton manufacturing site. Reporting to the site Quality Manager, join the quality function to audit GKN Aerospace internal and external requirements such as Business/Quality Management Systems (BMS/QMS) & processes, against Regulatory Requirements, Industry Standards and Customer Requirements. Our Luton site operates core hours of 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays, giving you an early finish to start your weekend. Job Responsibilities Assist the Quality Manager in the delivery of audit activities that support the respective audit plans and schedules. As appropriate, lead in audit engagement planning, scoping, and follow-up activities. When charged with undertaking an audit, delivering the objectives of the audit, ensuring adequate preparation for the conduct of their respective audit criteria. Providing appropriate constructive feedback and recognition for the audit participants and site leadership team. Within their specific audit criteria for gathering audit evidence, recommendations and preparing the audit and distributing the audit report and conducting the audit follow up. Identify and share across the business, best practices and support continuous improvement of the BMS/QMS and its processes.Youll assess audit evidence and non-conformities, highlight improvement opportunities, and share clear recommendations and risk insights with the Quality Manager. Youll also play a key role in supporting root-cause analysis and corrective action activities. Propagate Quality Culture across GKN Aerospace Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Demonstrable experience of working within a regulated industry such as Aerospace or Automotive Possess the necessary personal attributes/behaviours to act in accordance with the principles of auditing. Knowledge in the use of risk based methods and techniques for audit planning and management; Demonstrable experience in Practical Problem Solving (PPS) and Route Cause and Corrective Actions (RCCA) Techniques in order to provide effective audit follow up / closure assessments. An effective communicator with experience in MS applications/tools. Desirable: Certification, or obtained training, as an Internal or External Auditor through a certified Training Partner Experience of aerospace management systems, processes and procedures Demonstrable knowledge of AS9100 / ISO 9001. Knowledge of Aviation Regulations (EASA, CAA etc.) & contracted customer quality requirements. Experience in undertaking Internal Audits, in a regulated industry, against the audit process requirements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Quality Assurance Auditor will demonstrate strong communication skills, using active listening, thoughtful inquiry, and clear articulation when engaging with diverse stakeholders. You'll build effective professional relationships across the business, supporting collaboration and shared understanding. With excellent analytical and critical-thinking abilities, you'll apply close attention to detail when working within complex systems, ensuring accuracy in identifying non-conformities and improvement opportunities. Confidently carry out critical evaluations of processes and designs, assessing effectiveness and highlighting areas for enhancement. Strong problem-solving skills and solid subject knowledge of requirements will support sound judgement and practical recommendations. The role requires effective note-taking, ensuring audit evidence and observations are captured accurately and transparently. The Quality Assurance Auditor will act with the highest level of integrity, maintaining impartiality, confidentiality, and professionalism at all times. With a mindset of adaptability and curiosity, remain open to new information, evolving requirements, and continuous improvementboth in own work and across the wider organisation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

HSE Manager £50,000 to £60,000 + benefits Full time - Monday to Friday Luton About the role An exciting opportunity has arisen for an experienced HSE Manager to join a growing, multi-site organisation operating within the electrical distribution and manufacturing sector. This role will take ownership of Quality, Safety, Sustainability & Compliance across the business. You will play a key role in driving a strong Health & Safety culture, ensuring ISO and legal compliance, and leading sustainability initiatives across multiple UK sites. This is a highly visible role where you will influence strategy, implement best practice, and drive continuous improvement across a dynamic and expanding group. Why Apply? This is an exciting opportunity to make a tangible impact across a growing, multi-site business. You will lead a team, influence strategy and help drive high standards of quality, safety, and sustainability in a dynamic and collaborative environment. Key Responsibilities Management Systems & Compliance • Maintain and develop ISO 9001, ISO 14001 and ISO 45001 certifications * Lead internal and external audits, driving continuous improvement * Ensure compliance with all relevant legislation and industry standards * Work closely with internal stakeholders and external ISO consultants Health & Safety • Lead group-wide H&S policy, procedures and initiatives * Conduct risk assessments, audits and implement safe working practices * Manage PPE, COSHH, first aid and emergency procedures * Deliver monthly reporting and drive a positive safety culture Sustainability & ESG • Develop and implement group-wide sustainability strategy * Set and manage environmental targets across all sites * Lead ESG initiatives and group-level reporting * Maintain ISO 14001 accreditation and environmental procedures Quality & Continuous Improvement • Support quality assurance standards across the group * Drive continuous improvement initiatives across all functions * Work with teams to embed best practice and compliance Facilities & Infrastructure Management • Oversee compliance for all assets (e.g. fire systems, wiring, legionella, lifts) * Manage contractors, RAMS approvals and site inductions * Oversee maintenance, cleaning and building services * Maintain emergency planning, BCP and DRP processes Training & Culture • Work with HR to deliver QHSE compliance training * Promote a culture of safety, sustainability and accountability * Support achievement of group H&S targets Key Requirements • NEBOSH and/or IOSH qualification * Proven experience in a QHSE / compliance leadership role * Strong knowledge of ISO 9001, ISO 14001 and ISO 45001 * Experience managing audits and management systems * Excellent organisational and project management skills * Strong communication and stakeholder engagement abilities * Analytical with strong decision-making capability * IT literate (MS Office, reporting and data analysis) * Full UK driving licence * Passion for Quality, Safety, Sustainability & Compliance Want to recruit a similar role? Cast UK is a leading executive consultancy, providing national recruitment solutions to both clients and candidates. Specialising in, HR, Procurement, Buying, Supply Chain, and Logistics, each member of our specialist team has a professional background specific to their recruiting sector. With this unique insight and knowledge, our consultants are able to place individuals from trainee through to main board. For more information on Cast UK or to discuss how we can find talent for your business then please visit

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focused on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. We are looking for an Industrialisation Engineer to join our Industrialisation team to support Capex / sustainability / NPI projects from cradle to grave across our existing and future programs. Working with Key stakeholders across the site, the post holder key objectives are to support and deliver manufacturing systems in compliance with identified requirements including Producibility, Productivity, Manufacturing cost, Regulatory/Customer/EHS requirements and adherence to Zero Defect Manufacturing (ZDM) standards, whilst delivering these projects to the agreed Budget and Schedule following recognised project management methodologies. The Industrialisation Engineer will support and deliver projects including the Planning, Development, Commissioning and Industrialisation of Manufacturing Systems & Processes for the Luton manufacturing site. The engineers development will include internal and external training as required. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, there is flexibility with working hours as arranged with the manager. There is the requirement to undertake occasional travel when required nationally and internationally, to meet suppliers. Job Responsibilities NPI • the industrialisation Engineer is responsible for the supporting and leading of designated projects including bid development, planning, delivery, and commissioning of Manufacturing Systems and Processes for New Product Introduction programmes [LG3->LG7]. Working with Design Engineering and Programme management, they are responsible for delivering a manufacturing system that fulfils all stakeholder requirements (Safety, Logistics, Quality, Producibility & Business case metrics), including development and maturity of Manufacturing processes and documentation. Capex, • the industrialisation Engineer is responsible for the delivery of CAPEX projects, from supporting the business case development through equipment specification, procurement, commissioning and implementation to ensure productivity & quality targets are met. This includes Identification of new technologies and their development & exploitation, and benchmarking of processes across the GKN portfolio of products. Sustainability, • the Industrialisation Engineer will lead/support continuous Improvement and obsolescence projects throughout the site as identified by the business. Leadership of Projects, • the industrialisation Engineer is responsible for technical leadership of designated industrialisation projects including manufacturing system design, equipment identification and specification, implementation and deliver of APQP activities to ensure robust process capability and ongoing performance. This includes Project Management, Planning, Resource identification, budgeting, & Project reporting within functional and Enterprise standards. Quality Responsible for ensuring implemented solutions deliver the required quality against specification requirements and further deliver sustained manufactured Product quality and drive a quality mind-set within the engineering team and ensure compliance to agreed Customer, Regulatory, Business and functional standards including AS9145 (ZDM). Relationships • Maintain positive, team relationships with internal and external customers, key stakeholders within the business. Foster and champion 5 principles within sphere of influence. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Technical expertise in Manufacturing Engineering Ability to influence people, build trust and establish effective working relationships within a global organisation Working knowledge of LEAN processes and practices Working knowledge of quality system models such as ISO9001 or AS9100 Experience of collaborating with Procurement, Finance, Works Engineering, Manufacturing Engineering and Operations. Desirable: Project / Program Management Professional Qualification Familiarity with AS9145 APQP process or equivalent Demonstrable experience in Industrial Engineering and demonstrated ability to deliver work in a structured project environment, with evidence of delivering significant improvements in terms of cost/quality of a manufacturing system Familiarity with appropriate digital opportunities for manufacturing systems Familiarity with managing CAPEX / equipment projects through to production implementation. Experience of managing New Product / Process introduction (industrialisation) & existing production process improvements Were seeking people who want to make a difference individuals with the talent, drive and passion to shape the future of what they do. As Industrialisation Engineer youll thrive in a collaborative, cross-functional environment, with exceptional organisational and time-management abilities. Youll confidently support multiple projects at once, demonstrating initiative and clear communication across all levels of the business. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. We are excited to introduce a newly created opportunity to join our team as Chief Manufacturing Engineer - NPI, playing a key role in shaping the future of our manufacturing capability. The Chief Manufacturing Engineer is responsible for leading the Industrialisation elements of New product development and/or transfer of work programmes from initial RFP response through to LCG7 within an IPT, working within a structured project / programme environment. The Chief Manufacturing Engineer holds technical accountability for project and programme deliverables, ensuing high standards and due diligence of industrialisation content. Specific responsibilities include generating manufacturing cost assessment for bids, creating and validating manufacturing system design and layouts, implementation and manufacturing system establishment including equipment, tooling, and methods to deliver a capable manufacturing system meeting programme Quality, Rate, and Manufacturing cost requirements (SQDC) utilising APQP tools and value stream design principles; as well as ensuring all regulatory, customer and internal GKN policy requirements are met. This work also extends to advanced planning and contribution to Technology programmes to establish / evaluate manufacturing methods for emerging technologies up to and including to TRL6.Specific outcomes.The CME NPI directly manages and leads a team of Industrialisation engineers, Industrial Architects and process development Research engineers who are deployable to projects and programmes as required, and provides functional governance for resources seconded into NPI / ToW programmes. This role is focussed on delivering solutions for the Luton manufacturing site for both Ice Protection systems and Transparencies product lines, however it is anticipated that collaboration with other sites and teams will be required to maximise impact and best practice learning. Occasional national and international travel is required dependent on program need. Core working hours at our Luton site are 07:3016:30 Monday to Thursday and 07:3012:30 on Fridays. Job Responsibilities NPI - the CME is responsible for Planning, Development, Commissioning of the Manufacturing System and Processes for New Product Introductions [LG0->LG7]. Working with the Design Chief Engineers (for Design and Build contracts) and Programme management, they are accountable for delivering a manufacturing system that fulfils all stakeholder requirements (Safety, Logistics, Quality, Produceability & Business case metrics), including development and maturity of Manufacturing processes and documentation. Sustaining - the CME may lead or support site improvement projects, including shopfloor layout improvements, Value Stream optimisation and process re-engineering efforts. This includes Identification of new technologies and their development & exploitation, and benchmarking of processes across the GKN portfolio of products. Leadership of Projects- Responsible for technical leadership of industrialisation projects including manufacturing system design, process requirements defintion, implementation and deliver of APQP activities to ensure robust process capability and ongoing performance. This includes Program Management, Planning, Resource provisioning, budgeting, & Project EV reporting within functional and Enterprise standards. Leadership of Teams Accountable to the site E&T manager for the delivery for all ME and Industrialisation content through the leadership of the core industrialisation team and the deployed manufacturing engineering team. Quality Responsible for Product quality within the NPI ME function. Expected to drive a quality mind-set within the deployed engineering team and ensure compliance to agreed Customer, Regulatory, Business and functional standards including AS9145 (ZDM). Bids Working closely with the Programme and Business Development team, be responsible for the industrialisation content of bid work including Technical risk management, cost estimation and implementation planning. Relationships - Maintain positive, team relationships with internal and external customers, key stakeholders within the business. Foster and champion 5 principles within sphere of influence. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Technical expertise in Manufacturing Engineering, with a relevant professional qualification / background (university degree) in engineering (eg. Aerospace, Mechanical, Electrical, Chemical) Experience of managing New Product / Process introduction (industrialisation) & existing production process improvements Ability to influence people, build trust and establish effective working relationships within a global organisation Familiarity with AS9145 APQP process or equivalent Working knowledge of LEAN processes and practices Demonstrable experience in Manufacturing Engineering and/or Demonstrated ability in leadership position with evidence of delivering significant improvements in terms of cost/quality of a manufacturing system. Working knowledge of quality system models such as ISO9000 or AS9100 Experience of being a primary contributor to Engineering Design Reviews (e.g. PDR, CDR) and Life cycle reviews. Experience of contributing to technical proposals and manufacturing cost assessment to support new business opportunities Desirable: Project / Program Management Professional Qualification Familiarity with appropriate digital opportunities for manufacturing systems We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 22.5% bonus and car allowance Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

As Senior Environmental & Sustainability Manager, you’ll come in right at the start, helping to influence how the programme is designed, consented and ultimately delivered on site. You’ll play a pivotal role in setting the environmental and sustainability direction before construction be

Reporting to the Senior Sustainability Manager, you will be part of our award-winning multidisciplinary Sustainability Midlands Team. Willmott Dixon is seeking a passionate and pro-active Assistant Sustainability Manager. Sustainability and social value have been at the heart of the business over th

As Senior Environmental & Sustainability Manager, you’ll come in right at the start, helping to influence how the programme is designed, consented and ultimately delivered on site. You’ll play a pivotal role in setting the environmental and sustainability direction before construction begins, wo

The Sustainability Manager will possess an understanding of the client, design team and McLaughlin & Harvey sustainability and carbon reduction targets. The main responsibilities will include, but are not limited to: Work closely with Design Managers, consultants, and the supply chain to influen

A leading sustainability organization based in Greater London is seeking a Campaign Manager to spearhead impactful campaigns that promote sustainability and ESG principles.

Sustainability Manager**Position OverviewThe Sustainability Manager oversees the development and delivery of sustainable operations strategies across investment property portfolios and real estate assets. The manager provides strategic leadership on portfolio-wide sustainability programs, integr

Manager, Nature - Group Environmental Sustainability. As Manager you’ll be part of a team of sustainability specialists responsible for shaping the Group-wide approach to nature, providing strategic advice based on specialist, technical nature knowledge, market insights and trends. This role bring

As a Sustainability Manager, you will focus on the delivery of our annual external sustainability report and the implementation of new reporting standards. Sustainability Reporting Manager. A passion and interest across the full breadth of sustainability with a particular interest on social and gove

Action Sustainability is expanding its global marketing function and is looking for a Campaign Manager to take ownership of multi-channel campaigns that drive real engagement, behaviour change and programme success. Be a brand ambassador, ensuring co‑branded Programmes content remains consistent w

Support the establishment of retail facing sustainability initiatives including green label products. Strong experience working in sustainability, preference for experience within an international company. Solid working knowledge of EU sustainability regulation – CSRD/ESRS, EUDR, ECGT, CSDDD, and

Are you passionate about sustainability and ready to drive impactful initiatives? Our client, a leading international law firm, is seeking a dynamic Senior Manager to lead their sustainability efforts and shape their ESG strategy. As the Senior Manager of Sustainability you will:. Implement and over

This is a newly created position which will truly offer someone the chance to develop, design and lead a Sustainability Programme across a national remit. Our client is looking for a passionate and dedicated Sustainability professional to. Develop, lead and deliver the sustainability strategy across

A leading UK property developer is seeking an experienced Sustainability Manager to lead sustainability delivery across a significant development portfolio. This role will contribute to the organisation's 2030 Sustainability Strategy with a focus on development projects.

Roe Restaurant in Greater London is looking for an Assistant Restaurant Manager to support daily operations, ensure exceptional service, and foster a motivated team. The ideal candidate will have prior experience in high-end restaurants, strong leadership skills, and a passion for hospitality and su

An innovative environmental solutions company in Greater London seeks an experienced Health, Safety & Environment Manager.

As an Environmental Sustainability Manager at Doncasters you will have environmental data analyst skills to lead and advance our ESG strategy across the globe! This role will play a central part in shaping our environmental performance, driving sustainability initiatives, and ensuring we meet evolvi

The Sustainability Partner will play a central role in shaping and delivering sustainability strategy, working closely with senior leadership and teams across the organisation to embed sustainable practices into day-to-day operations and long-term planning. Act as a trusted sustainability advisor to

Connect regularly with operational leads, holds regular governance meetings to ensure visibility of key milestones and risks is clearly understood, escalated and mitigated to ensure successful implementation of sustainability activities. We are looking for a highly capable Engineering Manager to joi

A leading construction firm in Peterborough is seeking a Site Manager to ensure the successful delivery of projects while maintaining high health, safety, and quality standards.

Electrical Engineering Manager.

A leading food manufacturer is looking for an Environmental Manager who will be responsible for ensuring compliance with environmental standards and driving sustainability initiatives.

A leading construction firm is seeking a Construction Senior Site Manager to oversee the delivery of a residential development in Wallingford, Oxfordshire.

A leading European consumer brand is seeking a Senior Finance Manager – Group Financial Reporting to join its high-performing Group Finance function. The ideal candidate will have strong expertise in IFRS, experience with statutory reporting, and a focus on sustainability reporting.

Primary DetailsTime Type: Full timeWorker Type: EmployeeSustainability Project Manager – Underwriting London based role with hybrid working* A visible, enterprise‐wide role where you’ll influence underwriting s

Roe Restaurant is seeking an Assistant Restaurant Manager to support daily operations and maintain high standards of hospitality. Ideal candidates should have a proven record in similar roles, possess strong leadership skills, and be aligned with the company’s sustainability ethos.

As Sustainability Risk and Traceability Manager, you’ll support our sustainable sourcing agenda by managing environmental and human rights risks throughout our supply chains. Collaborate with cross‑functional teams across sustainability, supply chain and enterprise risk communities to advance su

Zest is seeking a Health, Safety & Environmental (HSE) Manager in Cambridgeshire and Peterborough to lead HSE initiatives in a food manufacturing environment.

A fast-growing start‑up that provides Sustainability Cloud and Consulting services is recruiting a Sustainability Account Manager to work in its London office. Background in sustainability/ESG consulting or experience contributing to sustainability initiatives from a corporate perspective. All app

The Sustainability Manager will possess an understanding of the client, design team and McLaughlin & Harvey sustainability and carbon reduction targets. The successful Sustainability Manager will be able to demonstrate the following key skills & competencies:. The successful Sustainability Manager w

North West Anglia Foundation Trust are seeking to appoint a Sustainability Manager to implement our green plan and to transform sustainability across the three sites at Peterborough (excluding Peterborough City Hospital), Stamford & Rutland Hospital and Hinchingbrooke Hospital. We are delighted that

Specifically, we are growing our Sustainability practice to drive end-to-end sustainability solutions for large corporate occupiers of commercial real estate portfolios, from site selection to operations and exit. Be accountable for assigned aspects of annual strategic sustainability plan, and suppo

Transport for London is seeking a Senior Sustainability Manager to lead sustainability initiatives within Places for London. The successful candidate will be responsible for driving sustainable practices across property management and development activities, collaborating with various stakeholders,

A leading energy consultancy is seeking a Sustainability Study Manager to lead sustainability studies and advisory services. This role requires expertise in sustainability management topics, project management experience, and strong client relationship skills.

Act as the sustainability “responsible marketing” leader and sparring partner, in close partnership with EM/IA Future Design owners, across R&D, Offer Management, Marketing, and Sales to embed sustainability credentials into our products, offers, and launches, and to prove the business value of

A leading global food and beverage company is seeking a Sustainability Manager to drive initiatives, manage partnerships, and enhance sustainability compliance. The role requires a strong passion for sustainability, relevant professional experience or degree, and excellent stakeholder management ski