Temperature jobs in CoventryCreate job alerts

Remedial Plumber / Water Hygiene Engineer\n\nLocation: Croydon, Greater London, England\n\nJob Type: Permanent, Full-Time\n\nIndustry: Engineering\n\nSalary: £28,000 - £45,000 per annum\n\nJob Description\n\nWe seek a knowledgeable and skilled Remedial Plumber / Water Hygiene Engineer to join our engineering team based in Croydon. The successful candidate undertakes remedial plumbing tasks and water hygiene maintenance to ensure compliance with health and safety standards and support the integrity of water systems within a variety of commercial and residential premises. This role requires the ability to diagnose faults, carry out repairs, and perform routine inspections and testing of water systems to prevent contamination and maintain system efficiency.\n\nKey Duties and Responsibilities\n\nConduct remedial plumbing repairs including pipework, valves, pumps, and associated fixtures to rectify faults and prevent water system failure.\nCarry out water hygiene inspections in accordance with industry regulations and company policies to identify risks such as legionella and microbial contamination.\nPerform water sampling, temperature monitoring, and cleaning of water systems to ensure compliance with statutory requirements.\nMaintain and service water hygiene equipment such as strainers, philtres, tanks, and calorifiers to ensure optimal performance.\nPrepare detailed reports and records of inspections, maintenance activities, and remedial actions taken.\nCollaborate with clients and site managers to schedule work and communicate findings effectively.\nAdhere to health and safety protocols and ensure all work complies with current legislation and industry best practise.\nUse hand and power tools safely and competently in the execution of plumbing and maintenance tasks.\nAssist in the development of preventative maintenance programmes to reduce future remedial work.\n\nRequired Qualifications\n\nRelevant plumbing qualification recognised within the United Kingdom, for example City & Guilds Level 2 or equivalent.\nCertification in water hygiene or legionella control, such as the Legionella Control Association (LCA) Water Hygiene Technician course or equivalent.\n\nEducation\n\nMinimum of GCSEs at Grade C/4 or above in English and Mathematics, or equivalent qualifications.\n\nExperience\n\nProven experience working as a plumber with a focus on remedial work and water hygiene maintenance.\nExperience conducting water hygiene surveys, sampling, and risk assessments in compliance with UK regulations.\nPrevious exposure to commercial and residential plumbing systems including hot and cold water systems.\n\nKnowledge and Skills\n\nComprehensive understanding of plumbing systems and water treatment processes.\nFamiliarity with relevant legislation including the Health and Safety at Work Act, Water Supply (Water Fittings) Regulations, and Control of Substances Hazardous to Health (COSHH).\nStrong analytical skills for diagnosing faults and determining appropriate remedial measures.\nCompetence in using diagnostic tools and plumbing equipment safely and effectively.\nGood communication skills to liaise with clients and produce clear, concise reports.\nAbility to work independently and manage time effectively to meet deadlines.\nAttention to detail and a methodical approach to maintenance and repair work.\n\nPreferred Qualifications\n\nAdvanced qualifications in plumbing or water hygiene management.\nMembership or accreditation from recognised professional bodies within the plumbing or water hygiene sectors.\nFull UK driving licence.\nExperience with Building Management Systems (BMS) related to water hygiene monitoring.\n\nWorking Conditions\n\nThis role involves working on-site across various commercial and residential locations in Greater London, primarily Croydon.\nThe role requires the handling of tools and equipment in confined spaces and at heights when necessary.\nWork includes exposure to water systems, potential contaminants, and sometimes adverse weather conditions.\nAdherence to health and safety practises is essential to minimise risk and protect personal well-being.\nFlexible approach to working hours may be required to meet client needs, including occasional emergency call-outs

Company description: Location: Coventry, England, United Kingdom Job ID: 87376 We Elevate... Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you’ll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don’t just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Job description: • Carry out routine servicing of lift equipment, including minor repair work and the routine replacement of components and in accordance with approved company procedures (PPE, PDA, Expert+ etc), • To rectify and reduce faults on lift/escalator equipment in cases of breakdown and check to confirm correct functioning, • Checking the lift function as part of maintenance, checks to include, speed, motor start/stop, weight, noise, temperature and power supplies using approved company issued tooling and protective equipment, • Conduct the routine inspection and adjustment of lift in accordance with approved procedures. Reinstate lift/escalator and complete service documentation, • Experience in Lift Servicing/ Maintenance/ Repairs preferred, • Qualified to NVQ level 3 minimum in Lift maintenance or equivalent, • Advanced Electrical and Mechanical knowledge, including Multi-Brand equipment, • Advanced problem-solving skills, • Full UK driving License, • The ability to work under pressure, to deadlines and within efficiencies, • The ability to work independently with a flexible approach, • Good communication skills at different levels (Client/Service Leader/Inspectors), • Manual dexterity - Requires the use of hands, arms and feet for repetitive lifting; use of hands and arms to operate various hand and power tools and to record written information, • Attractive salary package, • Company van and fuel card for flexibility on the road, • Enjoy 25 days of annual leave plus all bank holidays, • One additional paid volunteering day each year, • Pension scheme with 6% company contribution, • Comprehensive life assurance for peace of mind for you and your loved ones, • Enhanced family leave to support you through life’s important moments, • Private medical cover with a trusted provider, including 24/7 access to a virtual GP for your convenience, • Employee Assistance Programme offering confidential support, • Free eye tests and eyewear discounts, • Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts

Metrology Laboratory Maintenance Engineer - 37176189 - £27.30/hr umbrella rate Do you have a NVQ Level 4 or an indentured apprenticeship in Mechanical, Electrical, or Maintenance Engineering? along with familiarity with scientific instruments like CMM, surface finish, and CT/X-Ray equipment, coupled with a background in quality standards? Are you ready to step into a role that combines technical expertise with a dynamic and innovative environment? This is your chance to become a Metrology Laboratory Maintenance Engineer and play a critical part in supporting a world-class Metrology Laboratory. This position offers the opportunity to contribute to engineering excellence, support cutting-edge prototype developments, and make a tangible impact on quality within the automotive sector. If you're passionate about precision, problem-solving, and delivering results, this role is tailored for you. What You Will Do: • Maintain and control laboratory environmental conditions, including temperature, humidity, and pressure, ensuring a safe and compliant workspace., • Support and coordinate maintenance activities for a variety of specialist equipment such as CMM, surface finish, CT/X-Ray, and optical metrology tools., • Act as the responsible person for Contract Job Registrations (CJR), including managing RAMS and coordinating contractors and suppliers., • Ensure statutory and safety assessments, including PUWER, LEV, COSHH, and equipment risk assessments, are up to date and adhered to., • Raise and manage purchase orders for maintenance and equipment support, ensuring accurate invoicing and supplier collaboration., • Work closely with Metrology Engineers, facilities teams, and external suppliers to meet technical requirements and deliver right-first-time results. What You Will Bring: • A vocational qualification such as an NVQ Level 4 or an indentured apprenticeship in Mechanical, Electrical, or Maintenance Engineering., • Strong knowledge of fluid and gas management systems, with proven experience in fault finding and rectification within facility environments., • Familiarity with scientific instruments like CMM, surface finish, and CT/X-Ray equipment, coupled with a background in quality standards., • A working knowledge of Health and Safety requirements, including Risk Assessment, COSHH, and PUWER, ensuring compliance at all times., • Excellent communication skills, a proactive attitude, and a natural ability to collaborate with diverse teams and stakeholders. This role is pivotal to the success of the Metrology Laboratory, which serves as a cornerstone for engineering development, root cause analysis, and benchmarking. By ensuring the laboratory's facilities and equipment operate at the highest standards, you will contribute to the company's mission of setting benchmarks for quality and innovation in the automotive industry. Your technical expertise and dedication will help drive results and maintain the laboratory's reputation for excellence. Location: This exciting opportunity is based in Whitley, a location that offers a blend of accessibility and a collaborative work environment. Interested?: Don't miss the chance to elevate your career as a Metrology Laboratory Maintenance Engineer. Apply now to join a forward-thinking company where your skills will make a difference. Take the first step towards an exciting and rewarding future today. This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Senior Electrical Design Engineer, Fluid Sensing & Instrumentation 📍 Coventry, UK | 💰 £80,000 - £85,000 | Permanent | New Role\nThe Opportunity\nA globally operating manufacturer of precision engineered sensor and instrumentation products is looking for a Senior Electrical Design Engineer to take technical ownership of next-generation fluid sensing systems. Based at their Coventry facility, this is a newly created role with genuine scope, leading a small development team while staying close to the design work you've built your career on.\nIf you've spent your career designing sensing and instrumentation electronics from first principles and you're ready to formalise your leadership experience, this is worth a conversation. You'll be developing advanced fluid level sensing products for some of the world's most demanding heavy vehicle and off-road environments, working across construction, agriculture, mining and commercial vehicles. Products that go into equipment made by the biggest names in the industry, deployed globally.\nThe Role\nYou'll own the full development cycle, from sensing architecture and electronics design through signal processing, validation and production launch. Technologies include guided wave radar, capacitive sensing and ultrasonic measurement. You'll lead and develop a small team of engineers, set technical direction, and be the go-to authority on sensing and instrumentation within the business.\nThis is a hands-on role. You'll be expected to work at the physics and electronics level, not just manage the process from a distance.\nKey Responsibilities\n * Lead and develop a small team of development engineers while remaining technically hands-on\n * Own end-to-end electrical design of fluid level sensing systems, from concept and architecture through to production launch\n * Design analog and mixed-signal electronics for harsh heavy vehicle and off-road environments\n * Drive innovation in sensing methods, signal processing and system robustness\n * Work within automotive-grade development processes including APQP and DFMEA/PFMEA\n * Collaborate with global OEM customers and partners on integration, field validation and performance\n * Design for extreme environments including wide temperature ranges, high vibration, shock, EMI/EMC and chemical exposure\nWhat You'll Bring\n * Degree in Electrical or Electronic Engineering\n * Solid hands-on experience in electrical design within sensor, instrumentation or measurement products\n * Background in heavy vehicle, off-road, construction, agriculture, mining or commercial vehicle sectors\n * Deep expertise in analog and mixed-signal circuit design\n * Experience with sensing technologies such as guided wave radar, capacitive, ultrasonic or similar industrial/automotive instrumentation\n * A track record of taking sensing or instrumentation products from concept through to production\n * Hands-on PCB design and troubleshooting skills\n * Experience designing for harsh environments including temperature extremes, vibration, shock and EMI/EMC\n * Familiarity with automotive quality processes including APQP and DFMEA/PFMEA\n * Some experience leading or mentoring engineers, you're ready to formalise this\n * Embedded firmware (C/C++) and automotive communication protocols (CAN, LIN) — desirable\n * IATF 16949 and ISO 26262 knowledge — desirable\nWhat's On Offer\n * £80,000 - £85,000 per annum\n * 25 days holiday annually\n * Company pension scheme\n * Life assurance\n * Casual, energetic workplace\n * Global product impact across construction, agriculture, mining and commercial vehicle markets

Junior Quality Engineer \nCoventry \nTemp to perm\n£18.00 - £20.00 \n\nPurpose of Role \nThe Junior Quality Engineer ensures that all welding and jointing activities-using Conventional Butt Fusion, Infrared (IR) Welding, Electro Fusion, and Solvent Cementing technologies - are performed in compliance with applicable technical standards (ISO, EN, DVS, DIN, etc.) project specifications, and Piping Systems procedures, within the framework of the company's ISO 9001:2015 certified Quality Management System (QMS). \n \nThe role safeguards product integrity, process compliance, and the delivery of high-quality, fully traceable joints and assemblies in all piping and fitting operations. \n \nKey Responsibilities Inspection and Quality Control \n- Perform visual, dimensional, and process inspections of welded and jointed assemblies using Piping Systems technologies (Butt Fusion, IR Welding, Electro Fusion, Solvent Cementing). \n- Verify that welding and jointing procedures, parameters, and operator qualifications comply with manufacturer specifications and relevant ISO, EN, DVS, and DIN standards. \n- Review recorded process parameters (e.g., heating temperature, pressure, time, alignment, and cooling duration) as captured by welding machines, ensuring compliance with approved procedures and full traceability. \n- Verify surface preparation, alignment, and environmental conditions before welding or cementing. \n- Conduct in-process and final inspections to detect and document any deviations or non- conformities. \n- Maintain accurate, traceable, and complete inspection records, welding logs, and calibration data in accordance with the ISO 9001:2015 QMS. \n- Support calibration control and verification of fusion machines, measuring tools, and inspection equipment. \n- Participate in non-conformance investigations, root cause analysis, and implementation of corrective and preventive actions (CAPA). \n \nDrawing and Material Verification \n- Act as a technical support and second line of verification for the Operational team, reviewing issued drawings and material lists to ensure they are complete, clear, and suitable for production. \n- Verify that engineering drawings contain all necessary information for fabrication and welding, such as dimensions, tolerances, alignment references, jointing symbols, and process notes, supporting operators in correctly interpreting the design. \n- Review that critical dimensions and tolerances are defined and correspond to the actual components and site constraints. \n- Cross-check the drawing content against the Bill of Materials (BOM) to confirm that all pipe sizes, materials, fittings, and jointing types are correctly identified and available for use. \n- Confirm that only latest approved drawing revisions are being distributed and used in production. \n- Report any missing information, unclear technical details, or inconsistencies to the Engineering or H&SQ&S department before fabrication begins, helping to prevent errors or rework. \n \nPre-Dispatch / Final QC Verification \n- Verify that all finished products are included in the approved dispatch list before loading to customers. \n- Ensure that all assemblies and joints have passed visual and dimensional inspection and are supported by the required data logs and traceability records. \n- Confirm that each product is correctly identified, labelled, and documented in line with the delivery list. \n- Check cleanliness, marking, protection caps, and packaging quality prior to loading. \n- Sign off on Final QC Release Reports and ensure all documentation is complete and traceable. \n \nAdditional Responsibilities \n- Ensure that only approved and traceable materials (pipes, fittings, solvents, etc.) are used in production. \n- Verify that equipment calibration, maintenance, and software versions are valid before use. \n- Support the preparation of as-built documentation (welding logs, inspection reports, material certificates) for customer handover packages. \n- Promote continuous improvement and share feedback on recurring quality issues or process deviations. \n- Ensure compliance with all health, safety, and environmental requirements in QA activities

Our OEM Client based in Whitley, Coventry, is searching for a Metrology Laboratory Maintenance Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £27.03 per hour. The Opportunity: We are looking for a proactive and technically capable Metrology Laboratory Maintenance Engineer to support our world-class Metrology Laboratory within Product Engineering. The laboratory plays a critical role in engineering development, prototype build support, root cause analysis, benchmarking, and maximising warranty recovery—helping to make Powertrain a benchmark for quality. You will be part of a specialist team delivering right-first-time results at pace, while maintaining a safe, compliant, and highly controlled laboratory environment. As Metrology Laboratory Maintenance Engineer, you will be responsible for ensuring laboratory facilities and equipment operate safely, reliably, and in full compliance with relevant legislation. Responsibilities: • Maintaining and controlling laboratory environmental conditions, including temperature, humidity, and pressure., • Supporting and coordinating maintenance activities across a wide range of equipment such like CMM, surface finish, CT/X-Ray equipment, Optical metrology equipment, lifting equipment, extraction and BES activities (specialist equipment will...

Artisan is working on with a national facilities company for a Mechanical Multiskilled / Job Purpose: Multiskilled/ mechanical engineer AP is responsible for PPM maintenance of plumbing systems for commercial buildings. To work closely with contractors to ensure that the plumbing systems are efficient, safe and meet all relevant regulations. The role also involves troubleshooting and solving any issues that may arise throughout the site. Duties: * Collaborate with contractors and builders to ensure plumbing systems properly installed and function correctly. * Issue H & S inductions, permits and SSOW. * Conduct on-site inspections of systems to adhere to regulations and safety standards. * Resolve any issues or malfunctions with plumbing systems. * Provide technical guidance and support to contractors. * Ensure compliance with industry regulations. * Weekly/monthly PPM’s, meet SLA/KPI deadlines. Responsibilities: * Hot and cold water systems, plumbing services including rectification of blockages. * Low temperature hot water heating systems, pumps and controls. * Ventilation, air handling and chilled water system. * Compressed air systems. * Legionella and pseudomonas control. * Building management system BMS (training given) * Refrigeration systems. * Standby generator and associated equipment. * Fire alarm system (training given) * White goods. ...

Metrology Laboratory Maintenance Engineer - (phone number removed) - £27.30/hr umbrella rate Do you have a NVQ Level 4 or an indentured apprenticeship in Mechanical, Electrical, or Maintenance Engineering? along with familiarity with scientific instruments like CMM, surface finish, and CT/X-Ray equipment, coupled with a background in quality standards? Are you ready to step into a role that combines technical expertise with a dynamic and innovative environment? This is your chance to become a Metrology Laboratory Maintenance Engineer and play a critical part in supporting a world-class Metrology Laboratory. This position offers the opportunity to contribute to engineering excellence, support cutting-edge prototype developments, and make a tangible impact on quality within the automotive sector. If you're passionate about precision, problem-solving, and delivering results, this role is tailored for you. What You Will Do: • Maintain and control laboratory environmental conditions, including temperature, humidity, and pressure, ensuring a safe and compliant workspace., • Support and coordinate maintenance activities for a variety of specialist equipment such as CMM, surface finish, CT/X-Ray, and optical metrology tools., • Act as the responsible person for Contract Job Registrations (CJR), including managing RAMS and coordinating contractors and suppliers., • Ensure statutory and safety assessments, including PUWER, LEV, COSHH, and equipment risk assessments, are up to date and adhered to., • Raise and manage purchase orders for maintenance and equipment support, ensuring accurate invoicing and supplier collaboration., • Work closely with Metrology Engineers, facilities teams, and external suppliers to meet technical requirements and deliver right-first-time results. What You Will Bring: • A vocational qualification such as an NVQ Level 4 or an indentured apprenticeship in Mechanical, Electrical, or Maintenance Engineering., • Strong knowledge of fluid and gas management systems, with proven experience in fault finding and rectification within facility environments., • Familiarity with scientific instruments like CMM, surface finish, and CT/X-Ray equipment, coupled with a background in quality standards., • A working knowledge of Health and Safety requirements, including Risk Assessment, COSHH, and PUWER, ensuring compliance at all times., • Excellent communication skills, a proactive attitude, and a natural ability to collaborate with diverse teams and stakeholders. This role is pivotal to the success of the Metrology Laboratory, which serves as a cornerstone for engineering development, root cause analysis, and benchmarking. By ensuring the laboratory's facilities and equipment operate at the highest standards, you will contribute to the company's mission of setting benchmarks for quality and innovation in the automotive industry. Your technical expertise and dedication will help drive results and maintain the laboratory's reputation for excellence. Location: This exciting opportunity is based in Whitley, a location that offers a blend of accessibility and a collaborative work environment. Interested?: Don't miss the chance to elevate your career as a Metrology Laboratory Maintenance Engineer. Apply now to join a forward-thinking company where your skills will make a difference. Take the first step towards an exciting and rewarding future today. This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Our OEM Client based in Whitley, Coventry, is searching for a Metrology Laboratory Maintenance Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £27.03 per hour. The Opportunity: We are looking for a proactive and technically capable Metrology Laboratory Maintenance Engineer to support our world-class Metrology Laboratory within Product Engineering. The laboratory plays a critical role in engineering development, prototype build support, root cause analysis, benchmarking, and maximising warranty recovery—helping to make Powertrain a benchmark for quality. You will be part of a specialist team delivering right-first-time results at pace, while maintaining a safe, compliant, and highly controlled laboratory environment. As Metrology Laboratory Maintenance Engineer, you will be responsible for ensuring laboratory facilities and equipment operate safely, reliably, and in full compliance with relevant legislation. Responsibilities: Maintaining and controlling laboratory environmental conditions, including temperature, humidity, and pressure. Supporting and coordinating maintenance activities across a wide range of equipment such like CMM, surface finish, CT/X-Ray equipment, Optical metrology equipment, lifting equipment, extraction and BES activities (specialist equipment will require supplier collaboration). Acting as the responsible person for Contract Job Registrations (CJR), including RAMS, and coordinating contractors and suppliers. Raising of SCaRF requests and managing invoices for the contracts. Ensuring completion and upkeep of statutory and safety assessments, including PUWER, LEV, EC-PL, COSHH, HAVS, and equipment risk assessments. Raising, managing, and controlling purchase orders related to maintenance and equipment support including managing invoices. Working closely with Metrology Engineers, facilities teams, and external suppliers to ensure technical requirements are met. Essential Skills, Knowledge and Experience Required: Good knowledge of fluid and gas management equipment & control systems. Experience in facility fault finding & rectification. Working level knowledge of Microsoft software (Excel, PowerPoint, Word). Functional Skills Level 2 or equivalent in English, Maths and Science. Strong, practical skills with good manual dexterity. Ability to follow written and spoken instruction and interface well with customers. Ability to work quickly and pay attention to detail. Background in quality standards and their importance. Familiarisation with scientific instruments (e.g. equipment such like CMM, surface finish, CT/X-Ray equipment, Optical metrology). Knowledge of company Health and Safety requirements, Risk Assessment, COSHH and SDS A full UK driving licence with less than 6 penalty points, no disqualification and 2 years accident-free record. Essential Personal Profile Required: Prepared to undertake further vocational training and development. A self-starter, keen to get involved and deliver value to the business. Commitment, flexibility, self-motivation, and a good communicator. Natural problem solver. Desire to develop self to learn about scientific instrumentation. Confident team player who naturally collaborates with others and is able to support a diverse and technically competent group of colleagues. Education Required: An indentured apprenticeship or NVQ Level 4 minimum vocational qualification in Mechanical, Electrical or Maintenance Engineering plus relevant technical experience. Working level knowledge of Microsoft software (Excel, PowerPoint, Word). Functional Skills Level 2 or equivalent in English, Maths and Science. TPBN1_UKTJ

Patient Temperature Management. This is an exciting opportunity to take ownership of a high-potential territory, selling a market-leading portfolio of patient temperature management solutions. Alongside new business development, you will play a critical role in clinical education, product training,

A leading temperature control solutions company in the UK is seeking a Warehouse Technician to join its expanding team.

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu