Trabajos commercial maintenance en Tucson, ArizonaCrear alertas

Job Description We are seeking a skilled and safety-focused Crane Operator to join our team. The ideal candidate will be responsible for operating various types of cranes to lift, move, and position heavy materials safely and efficiently on construction and industrial sites. Responsibilities: • Operate mobile cranes to lift, move, position, and place materials and equipment., • Inspect cranes and rigging equipment daily before operation to ensure safety and proper functioning., • Follow load charts, signals, and site plans to ensure safe and accurate lifts., • Communicate effectively with signalers, riggers, and ground crews., • Perform routine maintenance and report any mechanical issues or safety hazards., • Adhere to all OSHA, site, and company safety regulations., • Maintain accurate logs of crane operations, loads, and inspections., • High school diploma or equivalent (GED)., • Valid NCCCO (National Commission for the Certification of Crane Operators) certification or equivalent required., • Minimum of 2 years of experience operating cranes (mobile, tower, or overhead)., • Knowledge of crane load capacities, rigging, and signaling procedures., • Strong attention to detail and safety awareness., • Ability to read and interpret blueprints and lift plans., • Physical ability to work outdoors in varying conditions. Must be certified in Arizona to operate cranes. Must be able to sit/stand and/or drive for long periods of time. Must be able to provide or obtain medical examiner certification prior to employment. Need to be able to commute around Tucson and surrounding areas with ease. Prior experience operation commercial vehicles and/or long trailer beds is preferred.

Job Description This family owned and operated HVAC contractor in Southern Arizona seeks technicians to join our team! We are looking for passionate and experienced technicians in the commercial field for service, repair and install. We are looking for a candidate with a minimum of 7-8 years of experience since this position is in field working with other technicians who are multiskilled in this demanding field. You have a unique opportunity to join a small yet diverse team before summer hits hard. With May month already in motion, we want to hit the ground running with vetted technicians who understand the industry of commercial HVAC needs. We only have room for 1 position for this year, so we expect the employee to be able to know the job and execute the work. This position is located in Tucson, AZ and we service about 100 mile radius for job sites. Responsibilities • Visit our clients' businesses to troubleshoot, diagnose, install, and repair their heating and cooling systems, • Complete commercial HVAC work & repair orders in a timely fashion, • Estimate time & extent of repairs, • Perform routine preventive maintenance, • Maintain material & supply inventory, • Rotating on-call schedule and overtime during peak seasons, • Represent yourself consistent with Zona Mechanical standards for punctuality, experience, and appearance, • Work is performed while standing, sitting and/or walking, • Requires local travel as necessary, • No upsell requirement Qualifications • Must have a minimum of 7 years professional work experience as a Commercial HVAC Technician, • EPA license - Universal, • High school diploma or equivalent, • Valid driver's license, • Clean driving record, • Ability to pass a background check and drug test, • Excellent communication and customer service skills, • Ability to work independently, includes organizational and time-management skills, • Computer literate with email capability, MS Office/Google Suite, phone application abilities and related business and communication tools, • Additional Experience a plus, but not required, • Familiarity with MSHA certifications (must be willing to obtain within 30 days of hire), • HVAC technicians can often spend their time bending, crouched, or leaning on their knees as they install and work on different types of equipment, • Requires the ability to communicate effectively using speech, vision and hearing, • Requires the use of hands for simple grasping and fine manipulations, • Requires bending, squatting, crawling, climbing, reaching, • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds, • Industry-competitive base wage (pay based on qualifications & experience), • Continual Training, • Company provided vehicle with take home availability, • Gas card provided, • Company provides all major tools needed for jobs, • Work boot voucher, • Company provided mobile phone, • Benefits package:, • Time off - PTO, Vacation, Holiday, Sick, • Health insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Retirement plan options with a company match up to 3%, • Weekly pay Company DescriptionZona Mechanical started with a notion of developing value within a business by taking care of their employees who in turn take care of their customers. To achieve this vision Zona Mechanical knew the following requirements needed to be met: Quality technicians & installers Longer term relationship building with customers and employees Cost effective solutions Zona Mechanical prides themselves in maintaining safety regulations and ongoing training in the HVAC/R industry.Zona Mechanical started with a notion of developing value within a business by taking care of their employees who in turn take care of their customers. To achieve this vision Zona Mechanical knew the following requirements needed to be met:\r\n\r\nQuality technicians & installers\r\n\r\nLonger term relationship building with customers and employees\r\n\r\nCost effective solutions\r\n\r\nZona Mechanical prides themselves in maintaining safety regulations and ongoing training in the HVAC/R industry.

Job Description Engine Technician – Ensure Peak Performance for Advanced Aircraft Systems PDS Tech Commercial is seeking an experienced Engine Technician to support a leading organization in the aerospace industry in Tucson, AZ. If you take pride in precision, safety, and the technical mastery required to keep turbine engines operating at their best, this role offers an exceptional opportunity to make a meaningful impact. Role Summary As an Engine Technician, you will be responsible for inspecting, maintaining, repairing, and testing turbine engines, APUs, and related systems. Your expertise ensures airworthiness, supports efficient return to service timelines, and upholds the highest standards of safety and compliance. This role is hands on, fast paced, and essential to maintaining the reliability and performance of corporate aircraft. Key Responsibilities * Follow all applicable work instructions and adhere to environmental, health, and safety requirements. * Perform and document all maintenance tasks in compliance with manuals, regulations, and quality standards. * Inspect turbine engines, APUs, and associated components for damage, defects, corrosion, and wear. * Interpret discrepancies and maintenance logs to identify root causes and determine corrective actions. * Recommend repairs, replacements, or modifications based on inspection results. * Install, remove, or modify turbine engines/APUs and related systems per schematics, engineering orders, and technical publications. * Repair damaged or worn components using hand tools, gauges, and test equipment. * Read, research, and interpret technical manuals to support troubleshooting and repairs. * Conduct and support operational checks and functional tests of engine and APU systems. * Install, remove, or modify aircraft structures and systems as assigned. * Inspect and certify completed work to ensure compliance and readiness for operation. * Assist with general aircraft maintenance tasks and support ground support equipment operations. * Participate in complete engine runs and off aircraft component repairs. * Perform mechanical and electrical removals and installations. * Complete additional duties as assigned. Required Qualifications * FAA Airframe & Powerplant (A&P) License. * Minimum 8 years of turbine engine line or shop maintenance experience (or equivalent). * Minimum 2 years of maintenance experience on corporate jet aircraft. * Minimum 1 year of experience working on aircraft. * Proficiency in engine removals & installations, borescope inspections, and detailed report writing. Preferred Qualifications * Strong troubleshooting skills and the ability to interpret complex technical information. * Experience supporting day to day aircraft maintenance in a service center environment. * Ability to collaborate effectively and assist other technicians when needed. Position Details * Job Title: Engine Technician * Location: Tucson, AZ * Pay Rate: 28.00–34.00 per hour * Schedule: Any shift * Employment Type: Full-time, Consultant Why Join Us At PDS Tech Commercial, you’ll work alongside experienced aviation professionals who value precision, teamwork, and craftsmanship. You’ll contribute to a high quality maintenance operation that keeps advanced aircraft performing at their best. We offer competitive compensation, professional support, and the opportunity to grow your career in a respected aerospace environment. Ready to Take the Next Step? If you’re an experienced Engine Technician looking to advance your career in a high impact aerospace setting, we encourage you to apply today and bring your passion for technical excellence to our team. Pay Details: 28.00 to 34.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description About Us Screws Loose Services LLC is a residential handyman and commercial facilities maintenance company that takes pride in doing the job right the first time. We may not be the first handyman company you call, but we strive to be the last one you’ll ever need. Since 2022, we’ve been building our reputation on trust, integrity, and a commitment to serving our community with excellence. What We’re Looking For We are seeking a Handyman Technician to join our growing team. While skills and experience are valuable, we place a stronger emphasis on character, work ethic, and honesty. We believe that the right person with the right attitude can be trained in the technical skills—but no amount of training can replace integrity and accountability. We are looking for someone who: * Shows up on time, every time * Takes pride in a job well done * Communicates clearly and respectfully with clients and teammates * Has the integrity to be honest about what’s done, what’s not, and what needs attention * Understands that character is who you are when no one is watching Responsibilities * Perform a variety of residential and commercial handyman tasks (repairs, maintenance, installations, and problem-solving) * Deliver high-quality service and workmanship to every customer * Follow safety procedures and company standards at all times * Communicate job progress and needs clearly with management * Look for opportunities to provide additional value to clients through add-on services and preventative solutions Pay & Benefits This position is performance-based pay. You’ll be rewarded directly for the value you bring to the company and our customers, not just the hours you clock in. Pay is tied to measurable performance indicators such as: * Customer satisfaction and 5-star reviews * Completing jobs correctly the first time (no warranty call-backs) * Adding additional services when appropriate * Signing service contracts with clients * Earning referrals from satisfied customers Compensation is designed to reward go-getters who take pride in their work and deliver results. The more value you create, the more you earn. Qualifications * Previous handyman, construction, or maintenance experience is helpful but not required * Must have reliable transportation and basic tools * Ability to work independently and as part of a team * Strong problem-solving mindset and willingness to learn * Must be legally authorized to work in the U.S. * Must pass a background check and drug test How to Apply If you are someone who values integrity, hard work, and customer service above all else—and want the opportunity to be rewarded based on performance rather than seniority—then we want to hear from you. Send your resume or a short introduction about yourself to: 520-344-3511

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a CNC Maintenance Technician III. Purpose and Scope This position provides basic support and preventative maintenance on production equipment. This role will be expected to collaborate with the Maintenance and Production teams to exceed organizational goals. Roles and Responsibilities • Ensure safety is the foundation of daily work through vigilance and accountability., • Performs advanced level PMs on equipment., • Execute projects assigned on equipment improvements, rebuilds, or troubleshooting., • Following manufacturer’s instructions, manuals, and diagrams, diagnose and troubleshoot advanced equipment problems., • Assist other Maintenance Techs on advanced PM’s and equipment troubleshooting., • Track maintenance activities in CMMS (Computerized Maintenance Management System)., • Ensure proper spare parts needed for PM’s are maintained, on hand, and/or available at time of PM., • Follows manufacturer’s instructions, manuals, and diagrams to diagnose and troubleshoot equipment problems., • Review equipment failures with other Technicians, Engineers, and/or Manager annually to determine if content and frequency of PM’s need modified., • 7+ years of experience performing PM’s and Maintenance on mechanical systems., • Intermediate level experience with CNC equipment., • Intermediate level experience working with computers and MS Products., • Working with suppliers to fix equipment and order required parts., • Experience managing spare parts inventory., • High School Diploma or GED., • Must be able to read and write English., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen., • Maintains a clean and orderly work area., • 2+ years of CNC equipment operation – Mills, Lathes, Hones., • 2-year technical degree or trade certification., • 5+ years of experience performing PM’s and troubleshooting CNC equipment issues., • Forklift certification. Founded in 1919, RBC Bearings (Nasdaq: ROLL) has a long, successful history of quality craftsmanship and innovation in highly technical bearing products that require sophisticated design solutions and manufacturing capabilities for Industrial, Aerospace and Defense applications around the world. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity. We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People. - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a CNC Machinery Maintenance Tech I. Purpose and Scope This position provides entry level equipment and preventative maintenance support on production equipment. Roles and Responsibilities • Perform documented basic PM's on equipment., • Execute projects assigned, with guidance, on equipment improvements, rebuilds, or basic troubleshooting., • Assist other Maintenance Techs on advanced PM’s and equipment troubleshooting., • Track maintenance activities in CMMS (Computerized Maintenance Management System), • High School Diploma or GED, • Must be able to read and write English, • Demonstrated use and understanding of basic hand tools, • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled, • Work on feet for entire shift, • Must be a U.S. Citizen, • Maintains a clean and orderly work area, • Ensures all maintenance actions are accomplished in a safe and timely manner, • CNC equipment operation – Mills, Lathes, Hones, • Experience working on mechanical systems RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job Description Job Posting: Commercial Office Space Maintenance Technician Company Overview: Pinnacle Property Management is a leading provider of property management services, dedicated to enhancing the value of our clients’ investments while ensuring a safe and exceptional working environment for our tenants within and outside their leased office space. With a commitment to tenant engagement ensuring timely response with work orders. Job Responsibilities: As a Commercial Maintenance Technician, you will play a crucial role in ensuring the safety, functionality, and aesthetics of our commercial office properties. Your responsibilities will include, but are not limited to: • Performing routine maintenance and repairs on HVAC, electrical, plumbing, and mechanical systems., • Conducting regular inspections of properties to identify and address maintenance issues proactively., • Responding promptly to maintenance requests from tenants and property managers., • Assisting with the setup and maintenance of building systems, including security and fire safety systems., • Collaborating with team members to complete larger repair projects and renovations., • Maintaining accurate records of work performed and materials used by utilizing our CMMS., • Ensuring compliance with safety regulations and company policies., • High school diploma or equivalent technical certification in maintenance or a related field is a plus., • Must be energetic and self-starter and not have to be guided., • Minimum of 4 years of experience in commercial leased office space maintenance or a similar role., • Strong knowledge of building systems, including electrical, plumbing, and HVAC., • Ability to troubleshoot and repair various maintenance issues effectively., • Troubleshooting HVAC and repair of water-cooled heat pumps., • Excellent communication and interpersonal skills, with a focus on customer service., • Experience with property CMMS for tracking of WO., • Familiarity with local building codes and safety regulations., • Basic knowledge of carpentry and painting., • Ability to work independently and as part of a team., • Strong problem-solving skills and attention to detail., • Ability to stand for long periods of time inside or outside with cold and hot weather conditions., • Ability to climb ladders and do overhead work in a safe manner., • Competitive salary., • Health, dental, and vision insurance., • Life insurance, • Paid time off, sick leave, and holidays 5days vacation after the first year., • Retirement savings plan with company match., • Opportunities for professional development and continued education., • Employee recognition at the end of the year., • A supportive and inclusive workplace culture that promotes work-life balance.

Job Description Facility Maintenance Technician Location: Tucson, AZ 85747 Pay: $22/hr Shift: 7:00 AM – 3:00 PM Overview Hands-on facilities maintenance role supporting mechanical equipment, basic electrical work, plumbing, and general building maintenance in a commercial/industrial environment. Entry-level friendly with training provided. Key Responsibilities · Assist with inspections and basic maintenance on pumps, chillers, cooling towers, and air compressors · Perform preventive maintenance (lubrication, filter changes, belt adjustments, cleaning) · Take equipment readings (pressure, temperature, amperage) and report issues · Perform basic electrical tasks (lamp replacement, tightening connections) under supervision · Assist with lockout/tagout procedures · Support basic plumbing repairs (valves, drains, domestic water, hydronic piping) · Perform minor building maintenance (drywall patching, painting, door hardware, equipment room upkeep) Preferred (Not Required) · Hands-on experience or coursework in maintenance trades · Exposure to commercial or industrial facilities · Mechanical aptitude and interest in technical systems · Backgrounds such as construction, warehouse, automotive, military, or trade school · Willingness to learn and work as part of a team

Job Description To be considered for this role, you must pass a “stick” SMAW/ASME 1X 6G Qualification test, with 6010 root pass, 7018 Hot pass and 7018 Cap. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Must have at least 8-10 years of Pipe Welding experience Must be able to pass a stick 6G pipe test with 6010 root and 7018 hot pass and cap Must be able to perform basic math and read a tape measure Pipe fitting experience is a plus Other duties will be assigned as needed QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations to enable individuals with disabilities to perform these essential functions. EDUCATION AND/OR EXPERIENCE: High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively with employees and supervisory personnel. MATHEMATICAL SKILLS: Ability to work with mathematical fundamentals of plane and solid geometry. Ability to measure, layout and use basic math skills working with fractions and decimals. REASONING ABILITY: Ability to solve practical problems and deal with a variety of situations. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS AND ABILITIES: Knowledge of occupational hazards and safety precautions applicable to the welding trade. Skill in the welding of ferrous and nonferrous metals. Ability to read and independently work from plans, sketches, diagrams, and blueprints. Company DescriptionSun Mechanical Contracting is actively seeking a delivery driver for its Tucson based operations. We are looking for a hardworking, reliable, and safety-minded employee to support our statewide construction and service operations. The employee is responsible for all phases of safety while setting up and operating company owned equipment within the guidelines of all federal regulation standards as well as company standards. The ideal candidate will have demonstrated experience operating all types of construction equipment and be capable of working with minimal oversight. The ideal candidate is willing to follow directions and closely adhere to construction industry safety standards. The position is primarily located outdoors, and the selected candidates will be expected to work under all types of weather conditions. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Deliver materials and equipment to and from job sites, • Operate all company vehicles in accordance with local laws/regulations in a safe and courteous manner, • Conduct daily inspections of the vehicle at the end of the shift and report any problems or damage to management, • Keep assigned vehicles clean and orderly, • Comply with all DOT and in-house regulations and rules, • Observe and report equipment or mechanical failures immediately OPERATING EQUIPMENT: • Operates fork trucks under general supervision, • Inspect equipment for safety issues daily, • Lift, position and place machinery, equipment or other large objects within the directed location at construction sites and industrial facilities SAFETY: • Promote, execute and adhere to the company’s safety program, • Attend weekly safety meetings QUALIFICATIONS: • Work schedule will require open availability including weekends, holidays, and overnights determined by the needs of the business; must be flexible, • Must be able to successfully complete and pass a pre-employment, post-offer background check and drug test EDUCATION AND/OR EXPERIENCE: • High school diploma/GED preferred, • Current driver’s license required with no current restrictions • Commercial driver's license CDL Class A/BSun Mechanical Contracting is actively seeking a delivery driver for its Tucson based operations. We are looking for a hardworking, reliable, and safety-minded employee to support our statewide construction and service operations. The employee is responsible for all phases of safety while setting up and operating company owned equipment within the guidelines of all federal regulation standards as well as company standards. The ideal candidate will have demonstrated experience operating all types of construction equipment and be capable of working with minimal oversight. The ideal candidate is willing to follow directions and closely adhere to construction industry safety standards. The position is primarily located outdoors, and the selected candidates will be expected to work under all types of weather conditions.\r\n\r\nESSENTIAL DUTIES AND RESPONSIBILITIES:\r\n• Deliver materials and equipment to and from job sites\r\n• Operate all company vehicles in accordance with local laws/regulations in a safe and courteous manner\r\n• Conduct daily inspections of the vehicle at the end of the shift and report any problems or damage to management\r\n• Keep assigned vehicles clean and orderly\r\n• Comply with all DOT and in-house regulations and rules\r\n• Observe and report equipment or mechanical failures immediately\r\n• Drive vehicle to worksites\r\n•\tLight Yard work is expected\r\n•\tLoad and Unload trucks \r\n•\tDuties may change and/or per the Support Service Lead\r\n\r\nOPERATING EQUIPMENT: \r\n• Operates fork trucks under general supervision\r\n• Inspect equipment for safety issues daily\r\n• Lift, position and place machinery, equipment or other large objects within the directed location at construction sites and industrial facilities\r\n\r\nSAFETY: \r\n• Promote, execute and adhere to the company’s safety program\r\n• Attend weekly safety meetings\r\n• Work in a safe, responsible manner to not intentionally or unintentionally injure oneself or endanger the well-being of others\r\nCooperate with Safety personnel, supervisors, and managers to ensure proper procedures are carried out according to the Company’s Safety policies\r\n\r\nQUALIFICATIONS:\r\n• Work schedule will require open availability including weekends, holidays, and overnights determined by the needs of the business; must be flexible\r\n• Must be able to successfully complete and pass a pre-employment, post-offer background check and drug test\r\n\r\nEDUCATION AND/OR EXPERIENCE:\r\n• High school diploma/GED preferred\r\n• Current driver’s license required with no current restrictions\r\n* Commercial driver's license CDL Class A/B

Job Description COMPENSATION: Hourly - Competitive EMPLOYMENT TYPE: part-time with the opportunity for full time JOB RESPONSIBILITIES: Excellent customer service is the number one goal. The most important duty of Household Goods (HHG) drivers is to drive safely to and from their destination. Drivers are expected to help with the loading and unloading of household goods, keep logs of their activities and make sure their vehicles are maintained and in good working order. Accepting payment for services and handle other paperwork related to the delivery are also driver responsibilities. JOB FUNCTIONS: · Participate in ongoing training/testing and development. · Perform pre-trip/post-trip inspections. · Loading/unloading of material and equipment. · Assist in packing/crating of personal effects needing protection for safe transport. · Inventorying shipments · Loading/ unloading of household goods into trucks/trailers. · Cleaning of company equipment and property throughout the day. · Comply with all policies found in the employee handbook as well as policies and/or procedures presented by management. · Drive truck to and from designated destinations of up to 11 hours with and maximum of 14 hours total as dot rules allow. QUALIFICATION REQUIREMENTS: · High School diploma or equivalent preferred · 1-2 yrs previous warehouse experience preferred · Good communication, organizational, time management mathematical skills · Dependable and Reliable · Inventory, Equipment maintenance, data entry and computer skills may be required · Must possess a valid commercial class A or B driver’s license with tankers and hazmat endorsements. · Must have previous commercial driving experience, or have graduated from an accredited commercial driving school. · Must have the ability to read and write English language. Perform simple mathematical calculations. · Must have mental ability to handle receipts; read maps, road signs, maintain record of duty status, etc. · Must have working knowledge of vehicle safety and control systems. · Must have knowledge of dot regulations governing safe driving, hours of service, inspection and maintenance. · Must meet or exceed the medical standards of the u.s. dept. Of transportation. · Must satisfactorily pass a drug test. · Must satisfactorily pass an alcohol test (if applicable) KNOWLEDGE AND ABILITY REQUIREMENTS: In order to perform this job successfully, an individual must be able to perform each essential duty to company’s standards. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMMUNICATION SKILLS: · Must be able to communicate efficiently and effectively to both co-workers and customers alike. · Must be able to listen and take instructions with regards to customer service. · Drivers often deal with customers, applicants with initiative, who are neat, well-spoken, and courteous and work well with little supervision. · A satisfactory driving record is usually required. MATHEMATICAL SKILLS: · Must be able to add, subtract, multiply, and divide using both whole numbers and decimal points. · The above skills must be used with regards to United States Dollars (US$) as well as weights and measures, volumes, and time. REASONING SKILLS: · Must be able to solve everyday problems, always looking for the best right answer. · Must be able to interpret/understand/explain a variety of instructions. These instructions can/will come in multiple forms (written, oral, schedule, diagram) · Must be able to read a map PHYSICAL DEMANDS AND ABILITIES: • Regularly lift and/or move objects 10-50lbs occasionally lift and/or move objects that weigh more than 100 lbs., • Frequently required to stand, walk, stoop, kneel, crouch or crawl, • Occasionally required to sit and climb or balance, • Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus, coordination, • Ability to work in varying temperatures, depending on the season, • The position requires good eyesight, hearing and good physical condition. Apply at , under CAREERS, include resume. Company DescriptionRalph’s has been reliably serving the Tucson community since 1926 for all their moving and storage needs. Our long track of success is due to our commitment to quality service. As an Atlas agent, we are one of the world’s best known and most trusted names in moving, thousands of Atlas professionals cover the globe. We’re the most trusted partner of corporations to move their employees and families, a respected choice of demanding military and government customers, and preferred by individual families wanting to make their best move. Ralph’s is a full service moving, storage and warehousing facility. Ralph’s Logistics is a third party provider offering full service distribution, integrated warehousing, final mile and white glove services. From the loading dock to the customer’s front door, Ralph’s can take you there.Ralph’s has been reliably serving the Tucson community since 1926 for all their moving and storage needs. Our long track of success is due to our commitment to quality service. As an Atlas agent, we are one of the world’s best known and most trusted names in moving, thousands of Atlas professionals cover the globe. We’re the most trusted partner of corporations to move their employees and families, a respected choice of demanding military and government customers, and preferred by individual families wanting to make their best move. \r\n\r\nRalph’s is a full service moving, storage and warehousing facility. Ralph’s Logistics is a third party provider offering full service distribution, integrated warehousing, final mile and white glove services. From the loading dock to the customer’s front door, Ralph’s can take you there.

About the Company Leonard Workforce Solutions is conducting a confidential search on behalf of a growing organization seeking a qualified candidate for the following position. Our client is an established manufacturer operating in a regulated, mission-critical environment. About the Role They are seeking a Senior Maintenance Mechanic to take full ownership of facility and production equipment maintenance across their Tucson operation. This is a hands-on, high-autonomy role reporting to the Maintenance Supervisor. You will be the go-to technical resource for troubleshooting, preventive maintenance, equipment installs, and utility work across the plant. This position is ideal for a seasoned industrial maintenance professional who thrives working independently, solving problems across multiple disciplines, and keeping a demanding production environment running with minimal downtime. Responsibilities • Troubleshoot, repair, and perform preventive maintenance on production and facilities equipment, • Install new equipment and relocate existing equipment, including running water, compressed air, three-phase electrical, steam, hydraulic, and vacuum utilities, • Independently identify and correct facility or equipment issues and communicate status to area management, • Direct maintenance mechanics and operators as needed on larger jobs, • Utilize the company's CMMS platform on tablets and other electronic devices to manage work orders, • Respond to production priorities and adjust work to minimize impact on critical operations, • Follow all safety protocols, use required PPE, and maintain a clean, organized work area Qualifications • High School diploma or equivalent, • Minimum 10 years of industrial maintenance experience, • Working knowledge across mechanical systems, plumbing, steam, hydraulics, pneumatics, pumps, welding, and basic electrical, • Ability to read and interpret equipment manuals, blueprints, and hydraulic/pneumatic schematics, • Certification (or the ability to certify) in one or more of the following: HVAC (Universal), Welding, Commercial or Industrial Electrical, or Instrumentation / I&E, • Comfortable working in an environment that involves hazardous chemicals and requires respirator use (must be clean-shaven where the respirator seals to the face), • Able to stand for extended periods and lift up to 50 lbs unassisted, • Basic computer proficiency (Microsoft Office, CMMS), • Must be authorized to access ITAR and/or EAR controlled technical data (U.S. Person status required) Required Skills • Industrial Maintenance, • Preventive Maintenance, • Hydraulics, • Pneumatics, • Steam Systems, • Three-Phase Electrical, • Welding, • HVAC, • Blueprint Reading, • CMMS Pay range and compensation package Compensation will be discussed with qualified candidates. Equal Opportunity Statement We are committed to diversity and inclusivity in our hiring practices.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Responsibilities: • Produce digital and signage projects as instructed through job ticket specifications, while meeting necessary quality standards and deadlines., • Perform basic repair of equipment malfunctions, and on going maintenance., • Monitor quality by comparing product to job ticket specifications. Prepare and/or edit all required paperwork., • Assist in other areas, as needed to meet customer deadlines.Requirements:, • Minimum 2 years digital print and signs experience, • Must have knowledge of digital printing, finishing and quality control, • Must have advanced math skills, • Must be able to read a ruler, • Accurately record counts and time worked on all jobs, • Ability to multi-task and work in a team-oriented environment, • Must be detail oriented and accurate, • Must be able to stand for the duration of the shift and lift at least 50 poundsAbout AlphaGraphics Commercial Printing Services: We have been a prominent printer of choice for over 40 years in the Tucson community. We have a diverse, engaged group of employees who provide our clients with outstanding customer service and quality design, direct mail, print and signage. In addition, as a franchise, we have access to training resources, and material that support business best practices, which assist in developing successful employees. AlphaGraphics Commercial Printing Services is an organization dedicated to exceptional customer service and high-quality results. AlphaGraphics Commercial Printing Services is an Equal Opportunity/Affirmative Action Employer

Job Description Join Tank's Recycling and Landfill as a Full-Time Heavy Equipment Lube Tech and take the next step in your career. This onsite position allows you to work directly with advanced heavy machinery, contributing to critical landscaping operations in Tucson. You will be part of a dynamic team fueled by a culture of integrity and safety, where problem-solving skills are valued and harnessed. Experience a workplace that encourages forward thinking and high performance, making your contributions impactful. With a competitive pay range of $20-23 per hour, your expertise will be recognized and rewarded. This is your chance to grow and thrive in an environment where your skills truly matter. You will receive great benefits such as Medical, Dental, 401(k), and Paid Time Off. Seize this opportunity and apply now to be part of a customer-focused company that stands at the forefront of the industry. Tank's Recycling and Landfill : What drives us Tank’s Recycling & Landfill is a locally owned and operated Tucson company providing sustainable solutions for construction, demolition, landscape, and inert material recycling. With multiple landfill and reclamation sites across Southern Arizona, we’re committed to responsible waste management, exceptional customer service, and supporting our community. Our team works hard to protect Arizona’s environment while providing dependable, efficient service to contractors, landscapers, and homeowners. Your day as a Heavy Equipment Lube Tech As a Full-Time Heavy Equipment Lube Tech at Tank's Recycling and Landfill, your daily responsibilities will center around the servicing and maintenance of heavy-duty construction equipment and commercial vehicles. You will perform essential preventive maintenance inspections to ensure optimal performance and safety standards are upheld. Your meticulous attention to detail will play a crucial role in maintaining accurate record-keeping for all services rendered, providing essential documentation for our operations. This position not only demands technical expertise but also a commitment to high performance and integrity, as you contribute to the smooth operation of our landscaping projects in Tucson. Your skills will help drive our mission forward while ensuring the reliability and longevity of our heavy equipment fleet. What we're looking for in a Heavy Equipment Lube Tech To excel as a Full-Time Heavy Equipment Lube Tech at Tank's Recycling and Landfill, you must demonstrate strong technical skills and a solid understanding of heavy equipment brands such as CAT, John Deere, Komatsu, Hitachi, and Case. A minimum of three years of experience as a lube tech is essential, as you will be responsible for daily servicing and preventive maintenance inspections. Familiarity with related servicing tools and software is also necessary to efficiently track maintenance records and service schedules. Strong problem-solving abilities and an abundant thinking mindset will help you effectively address equipment issues as they arise. Additionally, a commitment to safety and a professional approach in a customer-focused environment will contribute to your success in this pivotal role within our Tucson-based operations. Must be willing to travel to our four different job sites across Tucson. Knowledge and skills required for the position are: • Knowledge of heavy equipment such as CAT, • John Deere, • Komatsu, • Hitachi Must be drug-free and submit to a background check and pre-employment drug screen.

Job DescriptionSalary: Summary We are seeking a dependable and safety-conscious CDL Driver to support our underground utility construction operations. This role involves the safe operation of commercial vehicles to transport materials and equipment to and from job sites. When not driving, the CDL Driver will assist with general labor and site work as needed. Responsibilities • Operate Class A commercial vehicles, including dump trucks, flatbeds, and equipment trailers., • Transport heavy equipment, tools, and materials to job sites in a safe and timely manner., • Maintain accurate driving logs and delivery records., • Properly secure loads in accordance with legal and safety standards., • Comply with all DOT, OSHA, and company safety policies and procedures., • Perform daily vehicle inspections and report any issues or required maintenance., • Assist with loading and unloading construction materials and equipment., • Coordinate with site supervisors and crews to meet project schedules., • Assist underground utility crews with labor tasks, including digging, site cleanup, and equipment handling. Required Skills & Abilities • 2+ years of commercial driving experience required; experience in construction is a plus., • Knowledge of DOT regulations and safe driving practices., • Ability to tow trailers with heavy equipment., • Ability to lift 50+ lbs and work in outdoor conditions., • Must be able to work safely outdoors in Arizona heat conditions and perform all job duties with no restrictions., • Experience working around underground utilities (water, sewer, etc.) preferred., • Willingness to work flexible hours, including nights or weekends if required., • High school diploma or GED preferred. Work Environment • Outdoor job sites with varying weather conditions., • Physically demanding; requires lifting, bending, and standing for long periods., • Fast-paced environment with strict safety regulations.

Job DescriptionClass A CDL Driver – Full Time Tucson, AZ | Join Tank's Recycling & Landfill as a Full-Time Class A CDL Driver and put your skills to work making a real impact in Southern Arizona. This onsite role offers steady hours, competitive pay, and the opportunity to operate specialized equipment in a fast-paced, team-oriented environment. If you're an experienced driver who values safety, consistency, and community impact, this is a great next step in your career. Who We Are Hello, we're Tank's Recycling & Landfill. Tank's Recycling & Landfill is a locally owned and operated Tucson company providing sustainable recycling and landfill solutions for construction, demolition, landscaping, and inert materials. With multiple landfill and reclamation sites across Southern Arizona, we're committed to responsible waste management, exceptional customer service, and protecting Arizona's environment. We proudly serve contractors, landscapers, and homeowners-and we take pride in doing the job right. What You'll Do Day-to-Day as a Class A CDL Driver As a Full-Time Class A CDL Driver, you'll play a key role in daily operations by safely and efficiently transporting materials across our sites and customer locations. Your responsibilities include: * Operating Roll Off Trucks, Simple 16, Belt Trailers, and End Dump trucks * Performing compactor swaps and roll-off container placement * Conducting daily pre-trip and post-trip inspections * Completing driving logs and required documentation accurately * Providing professional, friendly customer service at job sites * Performing daily vehicle servicing and light maintenance * Collaborating with dispatch and team members to ensure smooth operations Schedule: Monday–Friday, 5:00 AM – 2:00 PM Enjoy a consistent routine with no rotating shifts. What Matters Most Qualifications & Requirements To succeed in this role, you'll need: * Valid CDL A license and current medical/health card * Minimum 3 years of commercial driving experience (preferred) * Experience operating: * Roll Off Trucks * Simple 16 Dump Trucks * Belt Trailers and End Dumps * Ability to perform compactor swaps * Comfort using a dolly for material deliveries * Strong customer service skills * Clean driving record * Commitment to safety and being drug-free Pay & Benefits * Hourly Pay: Pay rate will be determined upon hiring based on experience * Benefits Include: * Medical & Dental Insurance * 401(k) * Paid Time Off Join Us If you're a dependable Class A CDL driver looking for steady work, great benefits, and a company that values safety, integrity, and community impact-we'd love to hear from you. Apply today and help shape a more sustainable future with Tank's Recycling & Landfill.

Job Description Busy Commercial Company looking for an entry-level HVAC individual to perform preventative maintenance on a commercial restaurant chain in Tucson and Phoenix, must have a minimum of six months of experience in the trade. Must be able to climb a ladder and lift up to 50 pounds, and work full-time. Salary will be based on experience.

Job Description DeliverThat is built for the ones who show up—the early risers, the hustlers, and the doers. We’re seeking confident and dependable independent contract delivery professionals across the U.S. to fulfill catering and route-based food deliveries. Join a driver-first platform that values your time, respects your hustle, and rewards your effort. Why Drive with DeliverThat? • Confident Earnings: We offer premium delivery opportunities and higher commission rates., • Flexible Schedule: You choose when and where you work. No minimums, no caps., • Nationwide Opportunities: With routes in over 90 cities and 8,000+ zip codes, you can work from almost anywhere., • Freedom & Control: Build a schedule that supports your lifestyle and financial goals.What You'll Need, • A reliable vehicle and smartphone., • At least two insulated catering bags., • Legal authorization to work in the U.S., • Must be at least 21 years of age., • A clean driving record (5-year MVR required)., • Strong communication skills and a professional demeanor., • A willingness to engage with support teams and provide excellent customer service. Para completar el registro en español por favor haga clic aquí: #zr DeliverThat was founded by drivers, for drivers. Our mission is to provide maximum opportunities: larger commissions, stronger relationships, and a platform where YOU are not “just a number”. Company DescriptionOur Mission: "By Drivers, for Drivers". This motto defines DeliverThat. We understand what you want and need, more pay per job and schedule flexibility. That is what we deliver to you. Since 2016, independent contractors using DeliverThat’s platform have earned an average of $35, including tips, for each completed delivery. What do these independent contractors have to do? Deliver catering orders to offices, commercial, and residential locations. Is that a little different than the other platforms? Sure. But, with each job taking only 30 to 40 minutes, drivers earn more, enjoy more flexibility, and save vehicle wear and tear. Gas prices are high. Vehicle maintenance is costly. Do right by yourself and take advantage of what DeliverThat can bring to your table. What do you get with DeliverThat? Service to over 7,000 zip codes nationwide More earnings, less travel No delivery quotas No required availability Same day and prescheduled delivery opportunities Live real-time dedicated support Complete transparency Want to make the most of your DeliverThat experience? Here’s how. Be comfortable using your smartphone & basic app technology Be 21 years of age or older with a reliable and safe vehicle Provide the same courteous service you expect for yourself Make it a habit to engage with & utilize our support teams Take pride in your appearance Use DeliverThat’s Driver App to problem solve and make the most of your time Job Type 1099 Independent ContractorOur Mission: \r\n"By Drivers, for Drivers". This motto defines DeliverThat. We understand what you want and need, more pay per job and schedule flexibility. That is what we deliver to you. Since 2016, independent contractors using DeliverThat’s platform have earned an average of $35, including tips, for each completed delivery. What do these independent contractors have to do? Deliver catering orders to offices, commercial, and residential locations. Is that a little different than the other platforms? Sure. But, with each job taking only 30 to 40 minutes, drivers earn more, enjoy more flexibility, and save vehicle wear and tear. Gas prices are high. Vehicle maintenance is costly. Do right by yourself and take advantage of what DeliverThat can bring to your table.\r\n\r\nWhat do you get with DeliverThat?\r\nService to over 7,000 zip codes nationwide\r\nMore earnings, less travel\r\nNo delivery quotas\r\nNo required availability\r\nSame day and prescheduled delivery opportunities \r\nLive real-time dedicated support\r\nComplete transparency\r\n\r\nWant to make the most of your DeliverThat experience? Here’s how.\r\nBe comfortable using your smartphone & basic app technology\r\nBe 21 years of age or older with a reliable and safe vehicle\r\nProvide the same courteous service you expect for yourself \r\nMake it a habit to engage with & utilize our support teams\r\nTake pride in your appearance\r\nUse DeliverThat’s Driver App to problem solve and make the most of your time\r\n\r\nJob Type\r\n1099 Independent Contractor

Job Description The primary responsibilities of Construction Laborer perform a wide variety of manual duties in support of telecommunications construction. This role performs tasks involving physical labor on job sites and light/heavy construction projects. Maintain control of outside plant (OSP)/Inside plant (ISP) activities surrounding the assigned work area(s). Support project timelines, conduct inspections, designing and providing accurate as-builts for projects. Other duties, responsibilities and qualifications may be required and/or assigned. (This is meant to be a guide. Duties may vary dependent upon management.) Essential Position Functions: • Able to utilize a variety of hand tools, operate power tools and equipment to perform outside plant (OSP) and inside plant (ISP) utility construction., • Able to dig trenches (by hand or power), clean up rubble and debris, backfill excavations, and/or compact earth to grade specifications, and remove waste materials., • Load and unload materials, machinery, and tools at appropriate locations., • Perform a variety of tasks involving strenuous manual labor in road, utility easement and private property environments to prepare worksite for telecommunications construction activities., • Able to place cabinets, hand holes and manholes., • Able to place conduits and (push/pull) fiber and coax cables., • Able to operate commercial vehicles and pull a variety of trailers., • Able to recognize underground and aerial utilities and eliminate potential hazards for construction work to be completed., • Maintain a clean job site: pick up all tools and equipment and secure job site each day to eliminate potential hazards., • Ability to safely utilize light/heavy underground excavation equipment, access manholes, hand holes, trenches, and large/small excavations., • Ensure that all work considers the safety of the customer and public and compliance with all governmental orders., • Use of hand tools, ladders, and equipment to assist in the completion of an assigned project., • Daily documentation of work performed, material usage, and other record keeping tasks., • Daily timekeeping required., • Perform work following established and TrueNet mandated Safety and Health guidelines., • Ability to solve problems quickly and effectively with little to no supervision., • Other duties as assigned. Additional Expectations: • Construction work is project-driven and may vary in availability based on client demand and workload. When role-specific assignments are not available, employees may be required to perform other related duties within the construction or telecommunications field. These duties may include, but are not limited to, ground support, site preparation, equipment maintenance, warehouse support, or assisting with other company projects as assigned. Education and/or Experience: • High school diploma or GED preferred., • 1+ years of telecommunication construction experience is preferred., • Ability to use hand and power tools required., • Must have a valid driver’s license (CDL is preferred)., • Ability to prioritize and complete assignments accurately and in a timely manner., • Must have basic Microsoft Office (Word, Excel, Outlook) skills., • Must be able to efficiently use a Windows-based computer., • Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment., • Strong interpersonal, organizational, oral, and written communications skills., • Must be able to work alone, and with a team., • Must possess a valid driver’s license and have a clean driving record., • Must be able to pass a background check and drug screen. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Frequent walking, standing, sitting within the work area., • Must be able to pass a DOT physical to obtain and maintain a DOT Health Card., • Must be able to lift, up to 100 lbs., • Must be able to pull ropes and work under a lineman safely as a ground-hand., • Must be able to work alone, and with a team., • Ability to effectively communicate with employees, management, peers, et al., • Must be able to work in various weather conditions (hot, cold, wet, and dry). Work Environment: The work environment characteristics described here are representative of those of a field environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to travel up to 50% (most travel is planned)., • Ability to work in all temperatures, climates, and weather conditions., • Must be able to work nights and weekends, as needed, to meet client needs., • Ability to operate a commercial vehicle and/or pulling a trailer., • Carry, set-up and extend ladders weighing up to 100 lbs., • Working on aerial lifts, ladders, at heights up to 40 feet., • Must be able to work in loud, noise-filled, environment out in the field., • The position requires working independently, as well as part of a team., • This position requires verbal and face-to-face contact with others daily. DEXctOWL5X

Job Description 10-4 Logistics USA seeks experienced Class A CDL (CDL‑A) drivers for OTR/W‑2 assignments. The company offers competitive pay, predictable scheduling, modern automatic tractors, and a benefits package designed to support drivers and their families. Candidates with varying recent experience levels, including recent driving school graduates who meet the listed experience pathways, are encouraged to apply. Compensation and benefits • Mileage pay: $0.50–$0.65 per mile (varies by experience and domicile), • Performance bonus: $0.10 per mile, paid weekly, • Estimated typical weekly earnings: $1,350–$1,800 (strong performers may reach the upper range), • Health, dental, and vision insurance options; life insurance, • 401(k) retirement plan, • PTO and AD&D coverage; safe and on‑time performance incentives, • Weekly or bi‑weekly home time options, • 34–48 hour reset; typically one day at home for every 5–6 days on duty, • 2022–2025 automatic Freightliner Cascadia and Peterbilt tractors, • Primarily dry van freight; approximately 70% drop‑and‑hook, • Safely operate Class A commercial motor vehicles in compliance with DOT regulations, state laws, and company policies, • Complete assigned routes, pickups, and deliveries according to schedule and instructions, • Perform pre‑trip, en‑route, and post‑trip inspections; report defects and maintenance needs, • Maintain accurate hours‑of‑service records and ELD logs, • Ensure proper cargo handling, securement, and documentation, • Communicate professionally and promptly with dispatch and customers regarding schedules and deliveries, • Valid CDL‑A license, • One of the following experience pathways:, • At least 3 months verifiable OTR tractor‑trailer experience plus completion of 120+ hours at a truck driving school within the past 12 months, • 6 months verifiable OTR, regional, or local tractor‑trailer experience within the last 12 months, • 12 months verifiable OTR experience within the last 3 years, • Able to meet DOT medical and regulatory requirements and pass required drug screening, • Proficiency in English sufficient for safe operation and clear communication, • Modern equipment, predictable schedules, and weekly performance pay make this role suitable for drivers seeking consistent earnings and reliable home time., • Recent driving school graduates who meet the listed experience pathways are encouraged to consider this opportunity., • 10‑4 Logistics USA is an Equal Opportunity Employer committed to creating an inclusive work environment.

Job Description General Summary An HAVC Technician to perform preventive maintenance, repairs, and installation of commercial and residential HVAC systems. work to be performed throughout Southern Arizona at US Border Patrol Stations. 4-10s. No on-call. DOE $23-28, plus $4.41 H&W. Must pass the Department of Homeland Security Background Investigation Essential Duties and Responsibilities • Performing routine maintenance, • Troubleshooting, • Repair, • Removal and Installation, • Communicate equipment deficiency, • Must pass the Department of Homeland Security Background Investigation, • Ability to perform most tasks of the craft without supervision, • Must be able to read and understand blueprints, construction drawings, schematics and diagrams, • Ability to drive safe, • Trained in all types of sizes of air condition refrigeration and evaporative cooling equipment, • Enviromental Protection Agency (EPA) certification to purchase and handle ozone depleting chemical as outlined in federal and state regulations., • Work in a team, • Must be able lift 50 lbs., squat, bend, stoop and knell for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $23.94 per hour. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information General Description: The Senior Maintenance Mechanic is an hourly position reporting to the Maintenance Supervisor. The Senior Maintenance Mechanic is responsible for all aspects of facility maintenance. This position requires an individual with in-depth knowledge of general maintenance and requires performing duties with little to no supervision. Dependability and attention to detail are required characteristics. The maintenance work environment involves the handling of hazardous chemicals. The ability to use a personal respirator is required. The physical demands of this position may involve standing for extended periods as well as frequent lifting of items weighing up to 50 lbs. (unassisted). Primary Responsibilities: • Achieve daily and job specific goals, • Provide maintenance support to other departments, • Troubleshoot, repair, and perform preventive maintenance to production and facilities equipment, • Install new, or relocate existing, equipment with all required utilities, including water, compressed air, electrical (three phase), steam, hydraulic, and vacuum., • Practice safe and efficient work habits, • Direct maintenance mechanics and maintenance operators as required, • Utilize REDAR’s CMMS platform, including the use of tablets and other electronic devices Education and Experience Requirements: • High School graduate or equivalent, • Able to read, write, and understand company written procedures, • Basic computer skills such as Microsoft office, • Minimum 10 years' experience in industrial maintenance including knowledge in troubleshooting equipment and systems, plumbing, steam, hydraulics, pneumatics, mechanics, pumps, some welding and basic electrical, • Must be able to read and understand equipment manuals, blueprints and hydraulic/pneumatic schematics, • Certifications (or the ability to certify) in one or more of the following are required:, • HVAC (Universal), • Welding, • Commercial or Industrial Electrical, • Instrumentation, or I&E Special Tasks and Focus Areas: • Achieve daily and job specific goals, • Complete jobs on time as assigned by Maintenance Planner, Supervisor, Facilities Engineer, or the Chief Facilities Engineer, • Provide maintenance support to other departments, • Respond to production requirements, • Adjust priorities to ensure critical operations experience minimal downtime, • Recognize and correct, repair, or report facility or equipment problems independently, • Communicate with area management as to status of maintenance workorder(s), • Troubleshoot, repair, and perform preventive maintenance to production and facilities equipment, • Conduct preventive maintenance, • Exercise knowledge of mechanical systems, steam systems, hydraulics, pneumatics, basic electrical, compressors, vacuum systems and welding, • Cleanup work area removing all tools, debris, dirt, overspray, etc., • Install new, or relocate existing, equipment with all required utilities, including water, compressed air, electrical (three phase), steam, hydraulic, and vacuum., • Layout area for equipment, • Identify location of all utilities, • Install all required utilities, • Safely rig and move equipment, • Cleanup work area removing all tools, debris, dirt, overspray, etc., • Practice safe and efficient work habits, • Follow all REDAR rules and policies, • Always use required PPE (Personal Protective Equipment), • Make sure others in the area are wearing PPE or are at a safe distance from the work, • Protect adjacent equipment, tooling, tables, etc. from debris or overspray, • Cleanup work area removing all tools, debris, dirt, overspray, etc., • Direct maintenance mechanics and maintenance operators as required, • Assign specific tasks when mechanics or operators are helping on a job, • Make sure they are wearing PPE, • Direct cleanup of work area removing all tools, debris, dirt, overspray, etc. R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as protected veteran, among other things, or status as qualified individual with disability

Job Description Join the Sargent Legacy in Securing Our Future This will be a second shift position working Mon-Thu 3:30 pm - 2:00 am. With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I - 2nd Shift. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Job Description: Arcadia Landscape is seeking an experienced Irrigation Technician to install, maintain, and repair irrigation systems across residential and commercial properties. This role is ideal for someone who enjoys troubleshooting and working independently. Arcadia Landscape has been serving the Tucson area for nearly 40 years, offering consistent work and a team environment built on reliability and long-term relationships. What You’ll Do: • Install, repair, and maintain irrigation systems (controllers, valves, backflow devices), • Diagnose and troubleshoot system issues, • Program and adjust irrigation controllers, • Perform inspections and preventative maintenance, • 3+ years of irrigation technician experience, • Strong troubleshooting and repair skills, • Valid driver’s license with a clean driving record, • Ability to work independently and manage workload Benefits: • Weekly pay, • Paid Sick Time (PST), • Paid Time Off (PTO) #hc72887

Job Description Join the Sargent Legacy in Securing Our Future This will be a second shift position working Mon-Thu 3:30 pm - 2:00 am. With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I - 2nd Shift. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job DescriptionSalary: $22.00 - $30.00 Irrigation Technicians assemble, install, and maintain commercial landscape irrigation pipes and systems. Duties include but are not limited to handling the materials for irrigation, troubleshooting irrigation systems and programming controllers. When not working with irrigation, Irrigation Technicians assist the crew in all aspects of landscape labor, including planting, pruning, and maintenance. They must know how to efficiently work with his/her hands and with tools such as shovels, rakes, and general landscape hand tools, plus assist in keeping sites clear and clean, weeding, edging, mowing, blowing and trimming, and perform a variety of other functions when requested. Hourly pay-scale is between $22.00 - $30.00. MINIMUM QUALIFICATIONS: • Experience: Ability to perform all competencies of Irrigation Helper., • Language skills: Ability to read, write and communicate effectively in English., • Math skills: Ability to add, subtract, multiply and divide quickly and accurately., • Physical requirements: Ability to lift, pull and push up to 50 lbs., carry materials, bend, twist, kneel, climb, and balance. Ability to work in a kneeling position for extended periods of time. Ability to work in the rain and in extreme temperatures. Ability to withstand dust, pollen and gas fumes on a daily basis., • Driving: Acceptable Motor Vehicle Record, Valid Arizona Drivers License, • Other: Although typical workdays are Mon-Fri, they must be able to work the occasional weekend. Employment offers are contingent to passing a prehire physical, background check and drug screen.You must be legally authorized to work in the United States. WORK ENVIRONMENT: Irrigation Technicians work principally outdoors and may work above ground, sub-surface or under/in water. A certain amount of strength, dexterity, and alertness is necessary due to proximity to equipment, tools, and other trades. Because irrigation technicians work in so many varied conditions, they must be knowledgeable of the hazards and safety requirements of each and every project. RESPONSIBILITIES: • Always demonstrate behavior in accordance with the AAA LANDSCAPE mission statement., • Always demonstrate a positive attitude toward tasks, functions, projects, owners agents, clients, and other AAA Team members., • Always demonstrate compliance with all aspects of the company uniform policy; be clean, presentable, well-groomed and neat. BENEFITS • Weekly Pay (40 hrs), • New Hire and Referral Bonus, • Health Insurance after 60 Days: Medical | Dental | Vision, • Supplemental Voluntary Insurance Plans, • Company-Paid Life Insurance & AD&D Plan after 90 days, • 401K Plan with Employer Match after 90 days, • Vacation, • Sick Time Applicable to State Law, • Employee Assistance Program, • Employee Development Program, • Certification Assistance Program, • In-House Arizona Landscape Contractors Association Certification (ALCA) Training AAA Landscape is a Drug-Free Workplace. As a federal contractor with safety-sensitive position we adhere to Federal regulations. AAA Landscape provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Dishwashers are responsible for ensuring the cleanliness and sanitization of dishes, tableware, glassware, pots, pans, and utensils through manual and machine cleaning methods. Additionally, dishwashers are expected to keep the dishwashing area clean and safe. Duties/Responsibilities: • Dishwashing and Sanitization: Operate commercial dishwashing equipment to clean and sanitize all dishes, utensils, pots, pans, and other kitchen equipment. Follow proper procedures to ensure cleanliness and hygiene standards are met., • Organization and Storage: Sort and stack clean dishes, glassware, and silverware in designated storage areas. Maintain cleanliness and organization of dishwashing area, including sweeping and mopping floors, emptying trash, and disposing of waste properly., • Support Kitchen Operations: Assist the kitchen staff with basic food preparation tasks, such as peeling, chopping, and washing ingredients. Collaborate with the culinary team to maintain a smooth workflow and ensure timely delivery of food to customers., • Compliance with Safety Regulations: Adhere to all health and safety guidelines, including proper handling of chemicals, equipment, and kitchen tools. Follow established procedures for waste disposal and maintain a clean and hazard-free work environment., • Communication: Communicate effectively with the kitchen team and other staff members to coordinate tasks, prioritize workload, and maintain a positive working atmosphere. Report any equipment malfunctions or maintenance requirements promptly., • Flexibility: Be willing to assist in various areas of the kitchen or restaurant as needed, including food plating, garnishing, and general cleaning duties. Adapt to changes in work schedules and be available to work evenings, weekends, and holidays as required., • Physical Stamina: Ability to stand for extended periods, lift heavy objects (up to 50 pounds), and perform repetitive tasks. The role may involve bending, stooping, and reaching during dishwashing and cleaning duties., • Time Management: Excellent time management skills to ensure the timely completion of tasks and maintain an efficient workflow. Ability to handle multiple responsibilities simultaneously and work well under pressure., • Team Player: Strong interpersonal skills and the ability to work collaboratively in a team environment. Willingness to support other team members and contribute to a positive work culture., • Attention to Detail: Meticulousness in following instructions and maintaining cleanliness standards. Pay close attention to small details, such as ensuring proper dishwashing temperatures and inspecting dishes for cleanliness., • Food Safety Knowledge: Familiarity with basic food safety and sanitation principles, including proper handling and storage of food items. Awareness of personal hygiene practices to maintain a clean and safe working environment., • Must be able to work flexible hours, including evening, weekends, and holidays., • Must have a valid Food Handlers Certification, • Must be at least 18 years old., • High school diploma or equivalent (preferred)., • Prolonged periods of standing and working in a kitchen., • Exposure to extreme heat, steam, and cold is present in a kitchen environment., • Must be able to lift up to 50 pounds at times., • Accrual up to 40 hours of PTO, • Dining Discounts – 50% off your meal at any Cold Beers & Cheeseburgers and 25% off your meal at any Bourbon & Bones, • Corporate Shoe Program through Shoes for Crews and Skechers, • Competitive Pay, • Flexible Scheduling, • Medical & Prescription, • Dental & Vision, • Health Saving Account (HSA), • Wellness Program, • Discount Pet Care Plan

This job is with JLL, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Maintenance Mechanic - JLL What this job involves: The Maintenance Mechanic plays a critical role in ensuring the operational excellence of JLL-managed facilities by supporting the inspection, maintenance, and repair of mechanical, electrical, and plumbing systems. In this hands-on position, you will work both independently and alongside the site Manager to maintain assigned properties' interior and exterior areas, including walls, flooring, fixtures, roofing systems, and lighting. Your contributions directly impact client satisfaction and facility performance, making you an essential part of our operations team. This is an opportunity to showcase your technical skills while delivering exceptional service in a dynamic environment. What your day-to-day will look like: * Perform ongoing preventive maintenance and respond to repair work orders on facility mechanical, electrical, plumbing, and other installed systems and equipment * Conduct assigned facility inspections and due diligence efforts, reporting on conditions that impact client occupancy and operations * Execute general interior maintenance tasks such as hanging pictures, installing keyboard trays, repairing office furniture systems, and fixing doors * Assist the operations team with building and equipment maintenance and repair as directed by management * Replace lighting fixtures and ballasts, clean HVAC coils, and change filters and belts to ensure optimal system performance * Update work order status in real time using CMMS systems and submit P-card receipts daily * Comply with all safety procedures, complete required safety trainings, conduct vehicle safety inspections, and escalate issues to customers and managers promptly Required Qualifications: * High School diploma, GED, or equivalent certification * Minimum of 1-3 years of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical systems * Strong customer service skills with the ability to interact professionally with clients and team members * Strong interpersonal skills and effective communication abilities * Valid licenses as required by the authority having jurisdiction * Ability to lift up to 80 lbs., work from heights, and climb ladders up to 30 feet while carrying a tool bag weighing approximately 20 lbs. * Capability to work in adverse conditions including extreme cold and extreme hot environments Preferred Qualifications: * Experience utilizing Computerized Maintenance Management Systems (CMMS) for work order tracking and documentation * Familiarity with completing Hazard Assessments and maintaining compliance with State, County, or City Ordinances, Codes, or Laws * Knowledge of safe storage, usage, and disposal procedures for hazardous materials * Defensive driving training or certification * Experience moving office furniture, machinery, equipment, and other materials in a commercial facility setting * Background in facility operations or property management environments * Basic troubleshooting skills for HVAC systems and building automation controls Location: Tuscon, AZ Work Shift: Wed - Sat / 6:00am - 4:30pm This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site -Tucson, AZ If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: * 401(k) plan with matching company contributions * Comprehensive Medical, Dental & Vision Care * Paid parental leave at 100% of salary * Paid Time Off and Company Holidays * Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement. For additional details please see our career site pages for each country. For candidates in the United States, please see a fully copy of our Equal Employment Opportunity policy here. Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. Accepting applications on an ongoing basis until candidate identified.

Job Description Design Engineer III – Hydraulic Valves & Mechanisms Sargent Aerospace & Defense is a premier global supplier of custom engineered, high quality products to the Aerospace and Defense Industries. Sargent holds a leadership position in this highly competitive environment as a result of its commitment to investment in people, technology, facilities, new products, processes and equipment. Sargent is comprised of two market focused groups: Sargent OEM Group and Sargent Aftermarket Services Group. This group structure allows Sargent to provide focused, customized solutions to the market segments served, while leveraging Sargent’s organizational strengths across every business unit. Sargent Aerospace & Defense products are found on many major Commercial and Military aircraft in operation worldwide. Products and systems include hydraulic actuation and valve systems, locking actuators, steering metering control valves, fuse pins, hot forged bolts, pneumatic ducting and valve seals, tubing system alignment joints, engine hot section and structural components, airframe components, shock strut bearings, PTFE lined spherical bearings and broad component maintenance, overhaul, spares logistics and power-by-the-hour support services. Sargent is also a major supplier of hydraulic components to the US Navy on all Nuclear Class Submarine programs. Products and systems in this product line include directional control valves, flow control valves, metering valves, restrictor valves, check valves, and electro-hydraulic servo valves. This product line, called the Marine product line, emphasizes stringent adherence to customer technical requirements while delivering a highly reliable product to withstand demanding in-service applications. Sargent has an immediate opening for a Hydraulics Design Engineer to support the Marine product line. Purpose & Scope: The Design Engineer will report to the Engineering Manager and is responsible for applying the principles and theories of science, engineering, and mathematics to solve technical problems in design, manufacturing, research & development, sales, inspection, and maintenance. The employee in this role will collaborate with peers within all the key business units to provide a robust & timely solution to the customers’ current and future design challenges. Enhance your technical skills while working closely with management and the rest of the team on multiple projects. Roles & Responsibilities: • Ensure that safety is the foundation of daily work through vigilance and accountability., • Perform engineering analysis (stress, FEA, fatigue) and apply problem-solving methods to support new product development and/or sustaining production of existing designs., • Create & review new designs for conformance to customer requirements & and proper application of engineering principles., • Apply, evaluate, and optimize Geometric Dimensioning and Tolerancing (GD&T) to facilitate inspection and manufacturing., • Write & review test plans and test reports in support of new programs to demonstrate compliance to customer specifications., • Interact with customers to clarify design intent and technical requirements., • Maintain accurate, orderly project records, including design and test data, customer specifications, directives, etc., • Develop technical proposals, cost estimates & schedules for non-recurring engineering activities., • Direct fellow engineers as well as designers & drafters in design concepts and optimization to meet strict deadlines., • Serve as technical lead on development and qualification test programs., • Direct others and serve as engineering representative on the Material Review Board (MRB) to facilitate disposition of non-conforming product. Required Job Knowledge, Skills and Experience: • Bachelor of Science degree in Mechanical Engineering, Mechanical Engineering Technology, Aerospace Engineering, or related field., • 5+ years engineering experience in any/all aspects of a product’s lifecycle – from initial design phase, through procurement and testing of a prototype, transition to production phase, and involvement in long term product support., • A lower level of experience combined with an advanced degree may be considered., • Proficiency with finite element analysis (FEA), ANSYS preferred., • Proficiency with Geometric dimensioning & tolerancing (GD&T) and tolerance analysis., • Proficiency with fatigue analysis, fastener analysis, and material & process control., • Proficiency with 3D modeling software (Pro/Engineer or CREO preferred)., • Previous experience with Design Failure Mode and Effects Analysis (DFMEA)., • Excellent writing, presentation, communication, and organizational skills., • Excellent MS Office skills., • Self-starter who demonstrates a sense of urgency in meeting customer expectations and delivering results., • Ability to investigate, diagnose and resolve complex technical problems and communicate in clear simple terms., • Attendance and punctuality at work are essential functions of this position. Preferred Job Knowledge, Skills and Experience: • Highly Valued - Work experience directly related to hydraulic and/or electromechanical component design and/or manufacture & test (servos, actuators, control valves, manifolds, etc...), • Highly Valued - Familiarity with electronic and/or hydraulic control system design., • Substantial ANSYS and CREO experience., • Substantial solid mechanics background., • Proficiency with MATLAB, Simulink or similar coding languages., • Proficiency with common machining practices and/or metal forming methods & processes., • Electrical and/or Mechanical hands-on aptitude displayed through personal hobbies/projects., • Substantial troubleshooting & root cause corrective action (RCCA) experience., • Previous experience with DFMEA for new designs. ITAR Requirement: Due to ITAR regulations, this position requires that the employee must be a U.S. Citizen. Quality Requirement: Employees will participate in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100 and/or ISO-9001 requirements. Physical Requirements/Working Conditions: The employee will be required to move throughout the building to collect, handle and process production parts. Join the Sargent Legacy in Securing Our Future Founded in 1919, RBC Bearings (Nasdaq: ROLL) has a long, successful history of quality craftsmanship and innovation in highly technical bearing products that require sophisticated design solutions and manufacturing capabilities for Industrial, Aerospace and Defense applications around the world. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays, • We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities: is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People. - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities: is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/Vet/Disabled

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security environments: Fire Alarm and/or Intrusion., • Current and valid state-required Physical Security and/or Life Safety license., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • NICET Level 2 certification or State-required licenses., • Knowledge of cabling infrastructure and conduit installation., • Ability to identify independent colors and learn color codes.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description We are seeking a Plumber Helper to join our team! The selected individual will install and repair water supply lines and drainage systems. Responsibilities: • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Maintain and repair septic and commercial sewer systems, • willing to learn trade, • experience in plumbing, maintenance, or other related field, • Ability to handle physical workload, • Company DescriptionABACUS PLUMBING IS A SERVICE PLUMBING COMPANY - WE INSTALL NEW WATER & GAS LINES , SERVICE PLUMBING IN ALL LEVELS , WATER HEATER , REPIPES,ETCABACUS PLUMBING IS A SERVICE PLUMBING COMPANY - WE INSTALL NEW WATER & GAS LINES , SERVICE PLUMBING IN ALL LEVELS , WATER HEATER , REPIPES,ETC

Job Description Responsibilities The Mobile Service Technician is responsible for maintaining the fleet for clients and to handle service calls at client locations. Provide service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 7 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility., • Have a current and valid CDL and Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description About Kooner Fleet Management Solutions Kooner Fleet Management Solutions is one of the fastest-growing national providers of on-site fleet maintenance, preventative service, and mobile repair solutions. With nearly a decade of industry experience, Kooner FMS helps fleets reduce downtime, extend vehicle life, and simplify operations through proactive maintenance programs and advanced technology. As a family-founded and field-first company, we take pride in delivering trusted partnerships, exceptional service, and innovative fleet management solutions that keep America’s trucks and trailers road-ready. Why You’ll Love Joining Our Team • Earn What You Deserve: Competitive pay starting at $32-35/hr. based on experience., • Weekly Paydays: Get paid every Friday – no waiting around!, • Stay Connected: Cell phone allowance included., • Invest in Your Future: 401(k) with company match., • Health Benefits that Kick in Fast: Medical, Dental, and Vision coverage after just 30 Days!, • Time to Recharge: Enjoy paid vacation time, paid sick time, and paid holidays to rest, recharge, and take care of what matters most., • We’ve Got You Covered: Life & Disability Insurance for added peace of mind – because we take care of our team on and off the job., • We’re Here for You: Access to our Employee Assistance Program for support when you need it most – we've got your back., • Bring a Friend, Get Rewarded: Refer great talent and earn $500 per successful hire – no limits on how many bonuses you can earn!, • Grow With Us: Big Career Growth Opportunities in a rapidly expanding, forward-thinking organization. About the Trailer Mechanic/Technician Role As a Trailer Mechanic/Technician, you’ll be the expert our customers rely on to keep their fleets on the road. This field-based role is perfect for skilled technicians who enjoy independence and variety in their work. You’ll be responsible for performing preventative maintenance, diagnostics, and repairs on Commercial trailers. Backed by a supportive team that values your skill, drive and dedication, you’ll tackle new challenges every day and take pride in delivering safe, reliable and efficient service that keeps America moving. Where You’ll Make an Impact • Perform onsite preventative maintenance, DOT inspections and follow up repairs on Commercial trailers in a field environment., • Respond to dispatch requests for scheduled and unscheduled service or maintenance., • Diagnose and repair electrical, brake, suspension and air systems – keeping trailers safe, compliant, and road-ready., • Repair structural and exterior components such as corner nose rails, corner radius, wheel seals, bottom skirts, panels, doors, and top rails., • Put your expertise to work using hand tools, power tools, and welding equipment to get the job done right., • Stay productive and efficient, meeting or beating industry-standard repair times., • Jump in wherever needed – we're a team that supports each other. What Makes You a Great Fit • At least 3 years of hands-on trailer tech experience working on Commercial trailers., • DOT inspection and air brake repair expertise that keeps fleets rolling safely., • Strong communication skills – you know how to connect and communicate with customers and drivers alike., • Comfortable using mobile apps, navigation systems and digital tools to stay organized and document repairs., • Ready for the outdoors – rain or shine at customer yards., • Independent, dependable, and self-motivated – you take pride in getting the job done right., • A positive attitude and safety-first mindset., • Must be 23+ with a clean driving record and a valid driver’s license., • Bring your own hand tools and we’ll supply everything else. Work Environment • Work in dynamic, high-traffic areas – safety and precision are key., • Expect exposure to dust, diesel fumes, and noise typical of a shop or yard environment., • Safely handle chemicals, oils, and grease as part of repair work., • Be ready to lift, move, and position heavy equipment or components., • Stay active – you'll bend, kneel, crawl, and crouch to access vehicle components., • Work outdoors in all weather conditions – rain or shine, our team gets it done. Kooner Fleet Management Solutions is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, free from discrimination and harassment. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We celebrate diversity and are dedicated to fostering a workplace where every team member can thrive. Kooner Fleet Management Solutions participates in E-Verify for employment eligibility verification. #KFMS1

Job DescriptionDescription: The Springs Resort & Spa is seeking an experienced and strategic Director of Engineering to lead all maintenance, facilities, and engineering operations in Pagosa Springs, Colorado. This leadership role is essential to ensuring the safe, efficient, and reliable operation of all resort infrastructure following a significant expansion that introduced new building technologies and systems. The Director of Engineering will oversee preventative maintenance, life safety and fire protection systems, elevator operations, building automation systems (BMS), electronic access control systems (including Dormakaba Ambiance), and renovation projects across both newly developed and legacy areas of the resort. The ideal candidate is a strategic technical leader with experience in modern building systems, resort renovations, elevator troubleshooting and vendor management, and team development. This individual must possess a strong eye for detail, the ability to teach and mentor team members, and a proactive approach to maintaining operational excellence across all resort outlets. Essential Duties and ResponsibilitiesEngineering Leadership & Strategy • Provide overall leadership, direction, and accountability for the Engineering and Maintenance department, reporting to the General Manager and leading a team of engineering and maintenance professionals responsible for resort-wide infrastructure operations., • Accountable for system uptime, preventative maintenance completion rates, guest-impact work order response times, and life safety compliance metrics., • Lead energy management strategies, sustainability initiatives, and water conservation programs aligned with ownership objectives., • Serve as the primary engineering contact during critical incidents and coordinate emergency response related to infrastructure failure, life safety systems, or environmental hazards., • Develop, implement, and continuously improve preventative and predictive maintenance programs., • Establish departmental goals aligned with resort operations and ownership objectives., • Lead annual capital planning and long-term infrastructure strategy., • Support and provide technical oversight during renovation of the resort’s legacy facilities., • Ensure consistent operational readiness across guest rooms, spa facilities, food & beverage outlets, retail spaces, and back-of-house areas.Systems & Infrastructure Management, • Oversee maintenance and repair of HVAC, plumbing, electrical, and mechanical systems., • Direct management and optimization of the resort’s Building Management System (BMS), including system monitoring, scheduling, energy controls, and integration with mechanical and life safety systems., • Provide executive oversight of the Dormakaba Ambiance access control system, including credential management standards, system integrity, vendor coordination, and security protocol compliance., • Oversee life safety and fire protection systems, ensuring required testing, inspections, compliance, and coordination with authorities having jurisdiction (AHJ)., • Provide direct oversight of elevator systems, including troubleshooting, vendor coordination, preventative maintenance, and performance improvement., • Ensure proper maintenance of newly implemented technologies associated with the resort expansion., • Review blueprints, schematics, and technical documents related to renovations and system upgrades.Renovation & Project Management, • Partner with ownership, contractors, and project managers during renovation and improvement projects., • Ensure construction and renovation work meets safety standards, code compliance, and brand expectations., • Monitor project timelines, budgets, and contractor performance., • Provide hands-on expertise in carpentry, woodworking, and finish work when appropriate., • Maintain detailed documentation of repairs, improvements, and inspections.Financial & Administrative Oversight, • Develop and manage departmental operating and capital budgets., • Monitor labor, utilities, maintenance expenses, and project expenditures., • Identify energy efficiency and cost-control initiatives, including optimization of BMS and mechanical systems., • Oversee procurement of tools, materials, and facility supplies., • Negotiate and manage vendor contracts and service agreements, including life safety, access control, and elevator service providers.Safety, Compliance & Risk Management, • Ensure compliance with all applicable federal, state, and local laws and regulations, including OSHA standards, Colorado building and fire codes, public health regulations, and environmental and water safety standards., • Oversee and maintain all life safety and fire protection systems, including required testing, inspections, documentation, and coordination with authorities having jurisdiction (AHJ)., • Maintain emergency preparedness protocols and response procedures related to infrastructure, environmental, and safety incidents., • Conduct routine safety inspections and implement hazard prevention initiatives., • Minimum 7–10 years of progressive engineering or facilities leadership experience in hospitality, resort, or large commercial environments., • Demonstrated experience managing newly implemented building systems and property expansions., • Proven experience overseeing Building Management Systems (BMS) in a multi-building or resort environment., • Proven experience overseeing Building Management Systems (BMS) in a multi-building or resort environment., • Experience managing electronic access control platforms, preferably Dormakaba Ambiance or similar enterprise systems., • Experience overseeing life safety system compliance and related code requirements., • Experience overseeing elevator systems, vendor coordination, and preventative maintenance programs., • Proven experience supporting renovation or capital improvement projects., • Strong working knowledge of HVAC, plumbing, electrical, mechanical, life safety, and water systems., • Budget management and capital planning experience., • Ability to read and interpret blueprints, schematics, and technical manuals., • Strong leadership, communication, and organizational skills., • Prior Director of Engineering experience in a resort environment., • Trade certifications or technical degree in Engineering, Facilities Management, or related field., • Carpentry and woodworking experience strongly preferred., • Ability to stand, walk, climb ladders, access confined mechanical spaces, and inspect facilities for extended periods., • Ability to lift, push, or carry items up to 75 pounds., • Ability to work indoors and outdoors in varying weather conditions. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Este empleador participa en E-Verify y proporcionará al gobierno federal la información de su Formulario I-9 para confirmar que usted está autorizado para trabajar en los EE.UU.

Job Description Job Title: Landscape Account Manager Location (city, state): Tucson, AZ Industry: Landscaping / Commercial Services Pay: $65,000 - $75,000 About Our Client: Addison Group is hiring on behalf of our client, a leading commercial landscaping services company that provides design, development, maintenance, and enhancement solutions for a variety of clients. They pride themselves on delivering high-quality service and maintaining long-term client relationships. Job Description: We are seeking a hands-on Account Manager to serve as the primary contact for client accounts. This role focuses on relationship building, overseeing field operations, and ensuring the delivery of high-quality landscaping services. You’ll drive client satisfaction, retention, and revenue growth while supporting and coaching field teams. Key Responsibilities: • Serve as the main point of contact for assigned client accounts., • Conduct regular site visits to monitor service quality and client satisfaction., • Identify opportunities for enhancement projects and develop proposals., • Resolve client issues and address concerns proactively., • Partner with Operations and Branch leadership to ensure service expectations are met., • Monitor account renewals, financial performance, and profitability., • Support hiring, training, and coaching of field crews., • Ensure compliance with all safety regulations and branch policies., • Maintain accurate records in CRM systems and assist with administrative reporting. Qualifications: • 3+ years of experience in customer service, account management, or leadership, preferably in landscaping or a related service industry., • Associate’s degree in business or related field, or equivalent work experience., • Strong client relationship management and communication skills., • Proven ability to lead, coach, and develop teams., • Proficiency with MS Office and CRM systems., • Valid driver’s license, • Background and MVR checks required Additional Details: • Reports To: Branch Manager, • Type: Full-time, On-site, • Schedule: 40 hours/week, standard business hours, • Start Date: Typically within 2–3 weeks of 1st interview, • Interview Process: 1st on-site with Branch Manager; 2nd virtual panel with leadership team Perks: • Company vehicle option (fuel and insurance covered; $45/week deduction for personal use), • Opportunity to manage and grow accounts within a leading landscaping organization, • Direct impact on client satisfaction and branch success Benefits (401k, Medical, Dental, Vision): • PTO / Paid Time Off, • Health, Dental, and Vision coverage, • 401(k) retirement plan, • Employee stock purchase plan, • Health & wellness programs Addison Group is an Equal Opportunity Employer. Addison Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Addison Group complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. Reasonable accommodation is available for qualified individuals with disabilities, upon request

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Type of Contract: Contract To Hire Per diem: Weekly Per diem for candidates who live +150 miles away from location Shifts: 1st, 2nd or Weekend • Adhere to General Work Requirements, • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft, • Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations, • Access and re-install aircraft components, which obstruct the performance of assigned tasks, • Perform basic mechanical and electrical removals and installations, • Document work performed per Inspections Procedures Manual (IPM), • Work on aircraft as well as in shops, • Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required, • Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems, • Fabricate parts/wire harness and install per engineering specifications, • Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges, • Assist with complex repairs at on-site and off-site locations, • Assist with engine removal and installation, • Assist in development of installations for engineering, • Assist with fueling/defueling aircraft as requiredQualifications, • Typically 3 years of avionics work experience or substantiated equivalent experience., • Ability to read and understand electrical engineering drawings., • Strong written and verbal communication skills for reporting on individual or aircraft status., • Own a basic set of hand tools and can demonstrate proper tool inventory and control., • Must obtain appropriate Ground Support Equipment (GSE) qualifications as required., • Must be able to work unscheduled overtime, including non-scheduled workdays and holidays., • Must be able to work outdoors in seasonal or inclement weather., • Ability to obtain a Security Identification Display Area (SIDA) badge, if applicable., • A Certification required if mandated by the customer (Commercial Aircraft); A Certification, P Certification, or A&P Certificate also acceptable., • Hold a GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certificate., • Experience working on corporate jet aircraft or commercial aircraft., • Basic PC skills. Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • Medical ,Dental and Vision coverage, • Employee life insurance, • Short & Long-Term Disability, • Voluntary Term Life, AD&D, & Critical Illness, • 401(K) with a Segula match #jsfirm

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Type of Contract: Contract To Hire Per diem: Weekly Per diem for candidates who live +150 miles away from location Shifts: 1st, 2nd or Weekend • Adhere to General Work Requirements, • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft, • Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations, • Access and re-install aircraft components, which obstruct the performance of assigned tasks, • Perform basic mechanical and electrical removals and installations, • Document work performed per Inspections Procedures Manual (IPM), • Work on aircraft as well as in shops, • Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required, • Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems, • Fabricate parts/wire harness and install per engineering specifications, • Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges, • Assist with complex repairs at on-site and off-site locations, • Assist with engine removal and installation, • Assist in development of installations for engineering, • Assist with fueling/defueling aircraft as requiredQualifications, • Typically 3 years of avionics work experience or substantiated equivalent experience., • Ability to read and understand electrical engineering drawings., • Strong written and verbal communication skills for reporting on individual or aircraft status., • Own a basic set of hand tools and can demonstrate proper tool inventory and control., • Must obtain appropriate Ground Support Equipment (GSE) qualifications as required., • Must be able to work unscheduled overtime, including non-scheduled workdays and holidays., • Must be able to work outdoors in seasonal or inclement weather., • Ability to obtain a Security Identification Display Area (SIDA) badge, if applicable., • A Certification required if mandated by the customer (Commercial Aircraft); A Certification, P Certification, or A&P Certificate also acceptable., • Hold a GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certificate., • Experience working on corporate jet aircraft or commercial aircraft., • Basic PC skills. Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • Medical ,Dental and Vision coverage, • Employee life insurance, • Short & Long-Term Disability, • Voluntary Term Life, AD&D, & Critical Illness, • 401(K) with a Segula match #jsfirm

Job DescriptionSenior Manufacturing Engineer Tucson, AZ Company Overview World View is a next-generation intelligence, surveillance, and reconnaissance (ISR) provider delivering integrated, multi-domain solutions across air, stratosphere, and space. By unifying tactical UAVs, high-altitude platforms, fixed-wing aircraft, and low-Earth orbit satellites under a single operational and technological framework, the company enables seamless data fusion and real-time decision-making. Leveraging advanced AI and machine learning, World View empowers defense, intelligence, and commercial customers to gain clarity, act with speed, and operate with confidence in complex environments Job Description You will be responsible for helping design, implement and maintain a manufacturing system consisting of electrical, mechanical, soft good fabrication, assembly, system integration, validation, and refurbishment activities. This position requires someone who is dynamic, driven, organized and detail oriented; excels in project management; communicates with ease at all levels; thrives in ambiguous environments and is adept at facilitating actions and resolving conflicts.As a member of the Integrated Product Team, you will be a key voice for manufacturing and supply chain in developing the next generation platforms. Role Responsibilities • Monitors and evaluates production methods to ensure adherence to product specifications and requirements., • Works closely with manufacturing personnel to identify cost reduction opportunities, develop process improvements, and address production issues., • Improves and optimizes product flow by analyzing and planning workflow, space requirements, workspace ergonomics, and equipment layout., • Identifies and interfaces with external industry SME’s and suppliers to specify new equipment and select machine components to ensure cost effective solutions., • Manages internal and external design, fabrication, assembly, programming, debugging, implementation, and validation of new machinery and equipment improvements., • Ensures that equipment, machinery and workstations meet applicable safety standards., • Supports machine maintenance and troubleshooting as needed., • Supervises training and work instruction creation for new equipment and processes., • Participates in engineering design reviews to provide feedback on the manufacturability of new components and assemblies., • Reviews and approves engineering drawings to ensure clarity and manufacturability prior to drawing release., • Interfaces with engineering and quality personnel to develop test methods, support QA studies, establish standards, and validate manufacturing processes., • Provides manufacturing decision-making information through data collection; calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Prepares product and process reports by collecting, analyzing, and summarizing information and trends in cooperation with Quality Engineering., • Maintains product and process database using appropriate software to enter and analyze data., • Positively reinforces and supports company policies, procedures and work practices., • Maintains product and company reputation by complying with government regulations., • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.Qualifications, • BS/BA in related field, • 10+years of manufacturing, design or test engineering experience with responsibilities including resource management, schedule management, budget responsibility, supplier selection, and multidisciplinary team involvement., • A minimum of 3 years of manufacturing automation experience, • Machine control design and PLC programming experience is required, • 3D CAD modeling skills are required, SolidWorks experience is preferred, • Proficiency in conceptual in-line planning and standing up new automated assembly lines, • Strong working knowledge of power subsystems and converter design and operation is highly desirable, • Excellent communication skills, both written and verbal, • Ability to work in a fast-paced cross-functional environment, make quality decisions, and meet challenging deadlines Bonus Points, • An advanced degree in a relevant field, • Hands-on experience with the automation of textile or plastics manufacturing, • Knowledge of soft goods, patterning and heat-sealing methods for thermoplastics, • Solar and Lithium battery charger design experience, • Knowledge and experience in Lean Manufacturing, 6-Sigma, and DMAIC processes, • Experience writing procedures and work instructions

Job DescriptionAbout TensorWave Our mission is simple: deliver seamless, secure, reliable, and resilient AI compute at scale. We've built a versatile cloud platform that eliminates infrastructure barriers, empowering builders to focus on innovation instead of fighting their stack. Because breakthrough AI should move at the speed of ideas, not infrastructure. About the Role TensorWave is a GPU cloud infrastructure provider powering the most compute-intensive AI and machine learning workloads in the industry. We operate a growing fleet of data centers across the United States and are scaling aggressively to meet surging demand for GPU compute. As the Data Center RMA & Inventory Specialist, you are the logistical backbone of our infrastructure operations. While our Technicians focus on the "racking and stacking," you ensure they have every component they need to succeed and that every failed part is tracked, returned, and replaced. You will manage the entire lifecycle of our hardware assets—from the moment a pallet arrives at the loading dock to the moment a decommissioned drive is securely destroyed. You will also serve as the primary point of contact for hardware vendors, coordinating on-site repairs and ensuring our maintenance contracts are fully utilized. Responsibilities * Stock Control: Maintain a precision inventory of critical spares (SFPs, fiber jumpers, hard drives, RAM, power cables, and tools). * DCIM Accuracy: Ensure the Data Center Infrastructure Management (DCIM) database and ERP systems are updated in real-time as assets move in and out of the "Ready for Use" (RFU) state. * Audit Leadership: Conduct weekly and monthly physical audits of the inventory cage and the data center floor to ensure 100% asset accuracy. * Procurement Support: Monitor "par levels" and alert the Data Center Manager when stock reaches reorder points to prevent project delays. * End-to-End RMA: Initiate and track Return Merchandise Authorizations (RMA) with vendors (e.g., Dell, HPE, Cisco, Arista). * Defective Media Handling: Manage the secure handling and tracking of failed storage media, ensuring compliance with data privacy standards (e.g., NIST 800-88). * Shipping & Receiving: Manage the loading dock operations, including unboxing, palletizing, and coordinating with carriers (FedEx, UPS, Freight) for outgoing repairs. * On-Site Coordination: Act as the primary liaison for third-party vendor technicians. You will schedule their visits and ensure they have the necessary access to perform repairs. * Repair Oversight: Escort vendor technicians on the data center floor, ensuring they follow all safety, security, and "Clean Room" protocols while performing hardware swaps. * Quality Assurance: Verify that vendor repairs are completed to standard and that all replaced parts are correctly logged before the vendor leaves the site. * Tech Collaboration: Work closely with the 8 Data Center Technicians to identify hardware failure trends and ensure that "Dead on Arrival" (DOA) equipment is caught and processed immediately. * Basic Troubleshooting: Perform initial "health checks" on returned or refurbished gear to ensure it is functional before returning it to general stock. Required Experience * 2+ years in inventory management, logistics, or warehouse operations, preferably within a high-tech or data center environment. * Strong understanding of shipping/receiving procedures and RMA workflows. * Ability to identify various IT components (CPUs, DIMMs, SFP types, Fiber connectors). * Proficiency with inventory management software and ticketing systems (e.g., ServiceNow, Jira, NetBox). * High level of organizational skill—you are the person who notices when a single SFP is missing from a box of 50. * Willingness to work shift schedules including nights, weekends, and holidays as part of a 24/7 coverage model * Ability to operate a pallet jack and other warehouse equipment safely. * Ability to lift and move boxes up to 50 lbs. * Willingness to work in a loud, climate-controlled data center environment. Preferred Experience * Experience in a customer-facing operations role at a cloud provider, managed services provider, or colocation facility * Exposure to GPU infrastructure, HPC clusters, or AI/ML compute environment. * Direct experience managing hardware replacement workflows through enterprise portals such as Dell TechDirect, HPE Support Center, or Cisco CCO. * DCIM/ERP Expertise: Previous experience using Data Center Infrastructure Management (DCIM) tools (e.g., NetBox, Device42, Nlyte) or enterprise inventory systems (e.g., SAP, Oracle, or ServiceNow Asset Management). * Data Sanitation Standards: Working knowledge of NIST 800-88 or DoD 5220.22-M standards for secure data destruction and hard drive decommissioning. * 5S/Lean Methodology: Experience implementing 5S (Sort, Set in order, Shine, Standardize, Sustain) or Lean principles within a warehouse or inventory "cage" environment to optimize space and workflow. * Technical Hardware Identification: Ability to visually distinguish between similar but incompatible components (e.g., SFP vs. QSFP, Multi-mode vs. Single-mode fiber, or different generations of DDR RAM). * Material Handling Certification: Current or previous certification in the operation of pallet jacks, stackers, or forklifts within a warehouse or loading dock setting. * Logistics & Compliance: Familiarity with international shipping requirements, including Commercial Invoices, AES filings, or ATA Carnets for moving hardware across borders. * Asset Tagging Strategy: Experience designing or maintaining a barcoding/QR code system for rapid asset tracking and audit reconciliation. What We Offer * Mission-driven company * Competitive salary * Stock options * 100% paid Medical, Dental, and Vision insurance * Flexible PTO * Paid Holidays * 401(k) * Parental Leave * Flexible Spending Account * Short Term Disability Insurance * Life and Voluntary Supplemental Insurance * Mental Health Benefits through Spring Health Equal Employment Opportunity TensorWave is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of any protected status under applicable law. Reasonable Accommodations TensorWave provides reasonable accommodations in accordance with applicable laws. If you require accommodation during the hiring process, please contact . Employment Eligibility All offers of employment are contingent upon verification of identity and authorization to work in the United States, as required by law. Background Checks Where permitted by law, employment may be contingent upon the successful completion of a job-related background check. Data Privacy Notice By submitting an application, you acknowledge that TensorWave may collect, use, and retain your personal information for recruiting and employment-related purposes in accordance with applicable data privacy laws.

Job DescriptionLaunch/Recovery Operations TechnicianTucson, AZ Company Overview World View is a next-generation intelligence, surveillance, and reconnaissance (ISR) provider delivering integrated, multi-domain solutions across air, stratosphere, and space. By unifying tactical UAVs, high-altitude platforms, fixed-wing aircraft, and low-Earth orbit satellites under a single operational and technological framework, the company enables seamless data fusion and real-time decision-making. Leveraging advanced AI and machine learning, World View empowers defense, intelligence, and commercial customers to gain clarity, act with speed, and operate with confidence in complex environments. Job Description The Launch Operations Technician will be responsible for the safe and successful launch of stratospheric balloons. They will contribute to pre and post launch activities including documentation of records and processes and the retrieval of flight equipment and hardware. Role Responsibilities · Participate in all aspects of the balloon Launch/Recovery/Command and Control Process· Regular maintenance of ground support equipment and vehicles· Manage work records, vehicle maintenance and repair logs, inspection forms, checklists, and processes· Participate and perform duties beyond the core scope of the role, including tasks unrelated to primary responsibilities, as directed by management.· Travel to remote locations for up to 8 weeks within the US and/or abroad· Ability to work overnight/off shifts supporting operational readiness Qualifications · 2 year college degree or equivalent mechanical or avionics experience· Proven expertise in UAS Operational environments, requiring a minimum of 100 hours of documented, qualified flight or console operational time.· Experience with basic machine shop tools and machines such as hand and power tools, industrial sewing machines, load cells, pressure gauges, etc.· Knowledge of safety practices in an industrial environment· Knowledge in 14 CFR Part 101 (Moored Balloons, Kites, Amateur Rockets, Unmanned Free Balloons, and Unmanned Rocket Operations)· Ability to perform in high pressure situations in dangerous gaseous environments· Ability to perform strenuous physical activities including walking, climbing, bending, and lifting 50lbs or more Bonus Points · Prior experience in the Stratospheric Balloon Launch/Recovery/Command and Control Industry· Flight Operations Background · Possess advanced ISR/Sensor qualification with a minimum of 500 hours documented time on targets in a live or simulated environment· Ability to obtain a Class A Commercial Drivers License and Hazmat endorsement What We Offer You’ll join a global, supportive, and growing team where your ideas will be heard, and your work will make a real difference. We care about doing things the right way, balancing structure with flexibility, and professionalism with personality. Together we’re building a people function that’s forward thinking, collaborative and built to scale. You’ll work side by side with experts in emerging technology, gaining exposure to cutting edge ideas and projects that are shaping the future. We offer a comprehensive benefits package including Medical, Dental, Vision, and Life Insurance because we believe in taking care of you as a person, not just a team member. Our modern office is designed to keep you inspired and energized, with a fully stocked kitchen, on-site exercise area, and stunning views that make every day brighter! We believe in creating a dynamic and inclusive workplace where creativity thrives, and every voice is heard. Our commitment to all team members is built upon five core cultural pillars: Engage, Lean In, Create, Care, and Own. Together, these pillars form the foundation of our employee experience while adhering to the highest standards of ethical and sustainable practices. Some Final Notes: Please note that this job description is intended to provide a general overview of the role. It is not a comprehensive listing of all duties, responsibilities, or activities, which may change at any time with or without notice. Equal Opportunity Employer: World View is proud to be an Equal Opportunity Employer. We do not discriminate in employment or personnel practices on the basis of race, sex, age, disability, religion, national origin, or any other characteristic protected by applicable law. All hiring, transfer, and promotion decisions are made without regard to these factors. Work Authorization: Candidates must be authorized to work in the U.S. without company-sponsored immigration support, now or in the future. This position does not offer immigration sponsorship and the company will not seek export authorization. Eligible candidates include U.S. Citizens, U.S. Persons, or individuals with equivalent work authorization. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Blue Air Conditioning is seeking qualified and experienced HVAC Installers with experience in commercial and residential installations. This is an hourly wage position where Quality, Safety and Integrity are a must with every installation. Excellent care for customers and team-members is the bench-mark for our operations with a focus on lasting relationships. Must have experience measuring and ordering duct work, installing low and high voltage electrical, gas and condensate piping. Preferred Qualifications – • Honest and Team-oriented, • Driver's license and clean driving record, • 7 years’ experience in light commercial and residential Installation, Service, and Maintenance, • EPA Certified Experience: • HVAC: 7 years (Preferred), • Commercial HVAC (Preferred), • Brazing (Required), • High and low voltage wiring (Required), • NATE Certification (Preferred), • EPA Universal (Required)

Job DescriptionWhy Charlie Health? Millions of people across the country are navigating mental health conditions, substance use disorders, and eating disorders, but too often, they're met with barriers to care. From limited local options and long wait times to treatment that lacks personalization, behavioral healthcare can leave people feeling unseen and unsupported. Charlie Health exists to change that. Our mission is to connect the world to life-saving behavioral health treatment. We deliver personalized, virtual care rooted in connection—between clients and clinicians, care teams, loved ones, and the communities that support them. By focusing on people with complex needs, we're expanding access to meaningful care and driving better outcomes from the comfort of home. As a rapidly growing organization, we're reaching more communities every day and building a team that's redefining what behavioral health treatment can look like. If you're ready to use your skills to drive lasting change and help more people access the care they deserve, we'd love to meet you. About the Role This role is a rare chance to lead the go-to-market efforts for one of the fastest growing startups in the healthcare industry. You'll be granted an unparalleled level of responsibility, as your efforts will define how we open and win in new markets. As a Regional Director, it will be your responsibility to manage a state-wide or multi-state region, supporting the Directors and Managers that represent Charlie Health in the region. You'll work hand-in-hand with our leadership team to identify patient referral sources, build relationships with clinical partners, and facilitate admissions for hundreds of at-risk youth. You'll obsess (in a healthy way) over ensuring that every possible patient, parent, and provider is aware of Charlie Health's programs. Our team is comprised of passionate, forward-thinking professionals eager to take on the challenge of the mental health crisis and play a formative role in providing live-saving solutions. We are looking for a candidate who is inspired by our mission and excited by the opportunity to build a business that will impact millions of lives in a profound way. Responsibilities • Support new admissions goals; this role will be responsible for the team's overall performance which may include carrying a book subject to current team size and growth, • Manage and lead a team of Outreach Directors and Managers in a specific region, ensuring that regional performance goals are met or exceeded, • Measure and own KPIs across your region, reporting upwards on a monthly basis, • Develop and operationalize GTM strategy for efficient new market penetration, • Create, build, and manage relationships with referral sources across priority markets, • Lead meetings with patients, parents, and providers to uncover needs, address barriers to treatment, and cement community partnerships, • Design strategies to better support and engage referral partners across different channels, • Deepen Charlie Health's penetration across existing partnerships, • Attend and lead various educational meetings, marketing presentations, and networking events both in person and via conference call, • Synthesize and share market feedback from partners, patients, and stakeholders to inform go-forward marketing and product strategies, • Work closely with internal partners including marketing, product, client success, and legal to deliver on GTM goalsRequirements, • Must be based in Tucson, AZ, • 6-10+ years of business development experience, including 2-3+ years of experience in sales leadership, • Experience in healthcare is a plus, • Proficiency with Microsoft Office, Google Suite, CRM (Salesforce preferred), scheduling, and video conferencing technologies, • Work authorized in the United States and native or bilingual English proficiency, • Demonstrated track record of top-tier performance in the development, maintenance, and growth of customer accounts in a B2B / outreach setting, • Experience managing, coaching, and motivating a business development team, • Experience measuring, analyzing, and being accountable to well-defined sales metrics/KPIs, • Exceptional interpersonal, relationship-building, and listening skills, with a natural, consultative style, • Ability to energize, communicate, and build rapport at all levels within an organization, • Ability to travel locally (within ~1 hour driving distance) for meetings with potential referral partners, • Must have reliable transportation, a valid driver's license, and the ability to drive up to 1-hour each way on a regular basis, • Strong project management skills, with a demonstrable ability to corral and manage details in a fast-paced, fluid environment Additional Information The total target base compensation for this role will be between $125,000 and $165,000 per year at the commencement of employment. In addition to base compensation, this role offers a target performance-based bonus. Please note, pay will be determined on an individualized basis and will be impacted by location, experience, expertise, internal pay equity, and other relevant business considerations. Further, cash compensation is only part of the total compensation package, which, depending on the position, may include stock options and other Charlie Health-sponsored benefits. Our Values • Connection: Care deeply & inspire hope., • Congruence: Stay curious & heed the evidence. Please be cautious of potential recruitment fraud. If you are interested in exploring opportunities at Charlie Health, please go directly to our Careers Page: . Charlie Health will never ask you to pay a fee or download software as part of the interview process with our company. In addition, Charlie Health will not ask for your personal banking information until you have signed an offer of employment and completed onboarding paperwork that is provided by our People Operations team. All communications with Charlie Health Talent and People Operations professionals will only be sent from @charliehealth.com email addresses. Legitimate emails will never originate from gmail.com, yahoo.com, or other commercial email services. Recruiting agencies, please do not submit unsolicited referrals for this or any open role. We have a roster of agencies with whom we partner, and we will not pay any fee associated with unsolicited referrals. At Charlie Health, we value being an Equal Opportunity Employer. We strive to cultivate an environment where individuals can be their authentic selves. Being an Equal Opportunity Employer means every member of our team feels as though they are supported and belong. We value diverse perspectives to help us provide essential mental health and substance use disorder treatments to all young people. Charlie Health applicants are assessed solely on their qualifications for the role, without regard to disability or need for accommodation. By clicking "Submit application" below, you agree to Charlie Health's Privacy Policy and Terms of Service. By submitting your application, you agree to receive SMS messages from Charlie Health regarding your application. Message and data rates may apply. Message frequency varies. You can reply STOP to opt out at any time. For help, reply HELP.

Job Description Shuttle Bus Leasing, a D/T Carson Enterprises, Inc. company is a bus leasing company offering its customers a range of customized leasing options. With over 1,000 buses in inventory, we can provide customers passenger buses that can transport anywhere from 15 to 120 passengers. Employee Perks for a Diesel Mechanic are as follows... • Weekly Pay: $20 - $30/HR based on experience and qualifications, • Workplace flexibility, full-time schedule, consistent and year-round work, • Career advancement opportunities, • Holiday pay & vacation, • Company offers medical benefits and retirement plan options Essential Responsibilities The primary duty of the Bus Mechanic is to diagnose, repair, rebuild, and overhaul transit buses and related equipment, according to manuals and factory specifications, using hand and power tools. The Bus Mechanic must have knowledge of and understand how parts of the bus or coach must perform. Employees in this classification perform skilled mechanical tasks in preventive maintenance, troubleshooting and repair of diesel-powered vehicles and equipment. Specific Responsibilities • Read job orders, observe, and listen to vehicles in operation to determine malfunction., • Assist with preventive maintenance, safety inspections, and annual DOT maintenance inspections., • Diagnose and perform all phases of vehicle and equipment repair & replacement including brakes, suspensions, & drivetrains., • Apply lubrication, cooling, exhaust and air or hydraulic systems to vehicles as needed., • Inspect, adjust, replace vehicle equipment, assemblies, sub-assemblies, the HVAC system, air ride systems, steering systems, and brake system., • Enter work order data onto computer systems., • Maintain a clean and orderly work area., • Valid driver's license required; Willingness to obtain CDL while employed - We train!, • Minimum of 3 years of mechanical experience substituting 1 year of related technical training for a year of experience., • Ability to bring in personal tools., • Understand and carry out oral and written Instructions., • Experience with Detroit Diesel 6v92 & 50 series is a plus., • Carry, pull, and push up to 50 pounds of dead weight., • Climb up and down a ladder., • Sit, stand, stoop, kneel, squat, crouch, and/or crawl., • Medical, • Dental / Vision, • Long- and Short-Term Disability, • Life Insurance ($50,000 automatically awarded when you enroll for our medical plan), • 401K with a 3% company match, • ESOP (We are Employee Stock Owners), • Company-sponsored ASE testing and training materials (Valued at $186/certification), • Earn $100 for each ASE H series certification you receive, • In addition, you can receive $500 for completing all 8 H series certifications and become a "Master Transit Bus Technician", • $50 for every H series ASE recertifications you obtain, • We can cover your Class B Commercial Driver's License cost & help train Get to know us: Completecoach.com Sblbus.com Transitsales.com Zepsdrive.com DOT We are drug free workplace that conducts pre-employment physicals and drug screenings. We are regulated by the department of transportation and will be conducting random drug testing at regular intervals. EEO We are an equal opportunity employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. If you require a reasonable accommodation to a known disability, are a qualified applicant or employee and if it will not impose an “undue hardship” on the operation of the business, please notify a member of the Human Resources staff and a reasonable accommodation will be made. D/T Carson Enterprises, Inc. reserves the right to amend or alter this job description at any time at the discretion of the company. Company DescriptionShuttle Bus Leasing, a D/T Carson Enterprises, Inc. company is a bus leasing company offering its customers a range of customized leasing options. With over 1,000 buses in inventory, we can provide customers passenger buses that can transport anywhere from 15 to 120 passengers. D/T Carson Enterprises Inc. offers an array of solutions for transformational needs. Our company specializes in bus remanufacturing, interior rehabs, accident and fire repair, rail repair and rehab, and alternative fuel conversions.Shuttle Bus Leasing, a D/T Carson Enterprises, Inc. company is a bus leasing company offering its customers a range of customized leasing options. With over 1,000 buses in inventory, we can provide customers passenger buses that can transport anywhere from 15 to 120 passengers. D/T Carson Enterprises Inc. offers an array of solutions for transformational needs. Our company specializes in bus remanufacturing, interior rehabs, accident and fire repair, rail repair and rehab, and alternative fuel conversions.

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description • Adhere to General Work Requirements as required in coordination with Quality leadership., • Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft., • Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft., • Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer., • Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership., • Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained., • Perform walk around inspection of aircraft for release from maintenance., • Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service., • Train, coach and mentor employees in the performance of duties in area(s) of qualification., • Provide data to customers as requested. Qualifications, • US Citizenship or authorized to work in the U.S. without visa sponsorship, • You hold a current and valid FAA Airframe and Powerplant License., • You bring at least 5 years of hands-on maintenance experience working on corporate or commercial jets., • You’ve worked on Bombardier aircraft for at least 1 year., • You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment., • You’re skilled at planning and problem-solving, ensuring that challenges are resolved efficiently and commitments are met., • You make decisions with a strategic mindset, keeping broader business goals in view while seizing opportunities., • You thrive in a team-based environment, working well with others to get the job done., • You have a strong “Get It Done” attitude, staying focused and driving results—even in the face of change., • You're customer-focused, committed to understanding needs and building strong internal and external relationships., • You’re passionate about growth and development—both your own and that of those around you., • You’re comfortable using a wide range of measuring tools and hand tools, and can operate and interpret test equipment with confidence., • You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.)., • You’re proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms., • You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved., • You communicate clearly and effectively in English—both spoken and written., • You have the ability to train, coach, and mentor others, helping team members grow and succeed in their roles. #JSFIRM Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts, LLC is currently seeking to fill a Mobile Crane Operator position. If you are interested, please email us your resume and call 520-989-9270 to schedule an interview appointment. Qualifications Minimum Qualifications • Mobile Crane Operator certification or license and Completion of an Apprenticeship Program and four (4) years of experience as a Mechanical Mobile Crane Operator in a related industrial maintenance/construction field working on a large mobile crane (150 ton and greater capacity), OR, • Associate's degree in a Mechanical field or closely related field and four (4) years of experience as a Journeyman Mechanical Mobile Crane Operator in a related industrial maintenance/construction field working on a large mobile crane (150 ton and greater capacity), • Passed the Certified Crane Operator Practical exam, • Candidate shall pass the Hands-on test, • Completed DDI and TEAMS training or equivalent, • Must have a Commercial Driver's License (CDL), • Extensive experience in and knowledge of rigging procedures, cable reeling and crane load testing, • Extensive experience with and knowledge of mobile crane preventative maintenance practices and inspection procedures, • Working knowledge of Hydraulic equipment, • Proficient in the use of Microsoft applications and advanced computer skills, • Skills and ability to work in an environment with minimal direction, • Ability to read, understand and apply information from technical manuals, blueprints and schematics for trouble shooting and repair in English Staff Experts, LLC is an Equal Opportunity Employer. Contact Information: Staff Experts, LLC (Tucson Branch) 1611 W Ina Road Tucson, AZ 85704 520-989-9270 Office 520-509-3709 Fax

Job DescriptionIT Network Administrator Tucson, AZ Company Overview World View is a next-generation intelligence, surveillance, and reconnaissance (ISR) provider delivering integrated, multi-domain solutions across air, stratosphere, and space. By unifying tactical UAVs, high-altitude platforms, fixed-wing aircraft, and low-Earth orbit satellites under a single operational and technological framework, the company enables seamless data fusion and real-time decision-making. Leveraging advanced AI and machine learning, World View empowers defense, intelligence, and commercial customers to gain clarity, act with speed, and operate with confidence in complex environments. Job Description At World View we are looking to add a Network Administrator to our growing IT team in Tucson, AZ. The Network Administrator role is to ensure the stable operation of networking equipment so that end users can accomplish business tasks. This includes installing, configuring, maintaining, supporting, and optimizing network hardware, software, and communications. The ideal candidate will have a strong background in network administration, a working understanding of systems administration, excellent problem-solving skills, and the ability to work effectively in a team environment. Role Responsibilities · Design, implement, and manage network infrastructure, including LAN, WAN, and wireless networks. · Monitor network performance and troubleshoot issues to ensure optimal operation. · Maintain network security by implementing and managing firewalls, VPNs, and other security measures. · Perform regular network maintenance, updates, and backups. · Collaborate with IT team members to support and resolve network-related issues. · Document network configurations, changes, and procedures. · Stay up-to-date with the latest network technologies and best practices. · Respond and resolve user issues, in a timely manner, via phone, email, chat, or in-person · Provide hardware and software support for user workstations and peripherals (as needed) · Identify and learn appropriate software and hardware used and supported by the organization. · Maintain work logs, accurate documentation, and submit weekly activity reports · Perform other duties as assigned by supervisor including but not limited to operational functions such as routine backups, system housekeeping, disk storage management and end user PC support. Administer and enforce conformance to all Information Technology Policies, Procedure, Standards and Practices including but not limited to software version control, confidentiality, security, and usage licensing. Qualifications · Proven experience as a Network Administrator or in a similar role. · Strong knowledge of network protocols, routing, and switching. · Experience with network security practices and technologies. · Proficiency in network monitoring and troubleshooting tools. · Excellent communication and teamwork skills. · Relevant certifications (e.g., CCNA, CompTIA Network+) are a plus. · Strong documentation skills including exceptional written and oral communication. · Customer service oriented: Exceptional interpersonal skills, with a focus on rapport building, listening, and questioning skills. · Troubleshooting and analysis skills for general network and computing issues · Ability to interact with staff at all organizational levels · Basic understanding of a wide variety of desktop & SaaS applications What We Offer You’ll join a global, supportive, and growing team where your ideas will be heard, and your work will make a real difference. We care about doing things the right way, balancing structure with flexibility, and professionalism with personality. Together we’re building a people function that’s forward thinking, collaborative and built to scale. You’ll work side by side with experts in emerging technology, gaining exposure to cutting edge ideas and projects that are shaping the future. We offer a comprehensive benefits package including Medical, Dental, Vision, and Life Insurance because we believe in taking care of you as a person, not just a team member. Our modern office is designed to keep you inspired and energized, with a fully stocked kitchen, on-site exercise area, and stunning views that make every day brighter! We believe in creating a dynamic and inclusive workplace where creativity thrives, and every voice is heard. Our commitment to all team members is built upon five core cultural pillars: Engage, Lean In, Create, Care, and Own. Together, these pillars form the foundation of our employee experience while adhering to the highest standards of ethical and sustainable practices. Final Notes Please note that this job description is intended to provide a general overview of the role. It is not a comprehensive listing of all duties, responsibilities, or activities, which may change at any time with or without notice. Equal Opportunity Employer: World View is proud to be an Equal Opportunity Employer. We do not discriminate in employment or personnel practices on the basis of race, sex, age, disability, religion, national origin, or any other characteristic protected by applicable law. All hiring, transfer, and promotion decisions are made without regard to these factors. Work Authorization: Candidates must be authorized to work in the U.S. without company-sponsored immigration support, now or in the future. This position does not offer immigration sponsorship and the company will not seek export authorization. Eligible candidates include U.S. Citizens, U.S. Persons, or individuals with equivalent work authorization. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Qualifications: Basic Qualifications: • Must be a US Citizen., • High school diploma or GED., • Must pass Client required background clearance., • Valid Driver's License—Driving is required for this position., • Overtime/Weekend work will be required occasionally., • Industrial/Commercial HVAC experience with refrigeration and control systems., • Must have good electrical troubleshooting skills., • Adequate computer proficiency to operate job-related applications., • Preferred Qualifications:, • Completion of HVAC vocational training or 5 years of facilities maintenance experience., • Universally EPA certified., • Knowledge of using Laptop, and building automated system software., • Ability to read blueprints: mechanical, electrical, and plumbing., • Ability to maintain and install sheaves (pulleys), belts and bearings on AHU's, • Knowledge of working on AHU motors up to 100 hp., • Services and repairs environmental control systems in office buildings and other commercial/industrial settings., • Conduct preventive maintenance on HVAC systems, including cleaning, lubricating, and inspecting components., • Strong computer skills required for troubleshooting and correcting digital control software., • Joins tubing or pipes to various refrigerating units with Pro-press, unions, solder, and brazing., • Observes pressure and vacuum, gauges, and adjusts controls to ensure proper operation., • Troubleshoot joints and connects for leaks, using gauges or soap and water solution., • Ability to do minor insulation repairs., • Troubleshoot electrical components, fuses, contractors, controls, etc., • May service and repair air conditioners up to 200 tons of cooling capacity in buildings., • Troubleshoot vav controls., • Performs other duties as assigned such as electrical, plumbing, or general maintenance.