Trabajos construction en St Louis, Missouri - Page 15Crear alertas

Job Description This position serves as support for operations on the jobs in which they are involved. Responsibilities range from participation in initial project set up and buyout, cost spread/estimate familiarity, job quantity tracking, on-site daily activity involvement, concrete material tracking, equipment and manpower productivity tracking, invoice approval, extra work ticket tracking, participation in job cost reporting, project safety compliance, quality control compliance, production analysis/tracking Specific Responsibilities: • Project safety compliance, • Job cost spread and estimate familiarity, • Participation in project sequencing and scheduling, • Project quantity/progress tracking, • Production analysis/tracking, • Participation in Project cost reporting, • Invoice coding and approval, • Material/equipment procurement, • Change order request issuance/tracking, • Coordination with GC/Owner, • Communicates well both verbally and in writing, creates accurate and punctual reports, delivers presentations, shares information and ideas with others, has good listening skills, • Ability to identify, assimilate and comprehend the critical elements of a situation to extract and interpret implications of courses of actions to attend to details of a problem., • Effectiveness in planning and controlling work, motivating, and developing subordinates, improving work methods and results, encouraging and supporting suggestions for work improvements, etc., • Breaks down problems into smaller components, understands underlying issues, can simplify and process complex issues, understands the difference between critical details and unimportant facts., • Plans for and uses resources efficiently, always looks for ways to reduce costs, • Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of quality problems, owns/acts on quality problems., • Ability to monitor construction schedules and advise on potential setbacks or issues., • Communicates expectations and importance of safety. Follows up and insures safety audits are completed accurately and timely. Identifies critical issues and assists in the development of improvement procedures. Education/Experience/Attributes/Requirements • 0-5 years of experience, • Bachelor's degree in construction management or Engineer recommended., • Basic/General knowledge of construction principles/practices required, • Excellent problem-solving skills, with an adaptable and flexible style in working with all types of individuals, • Energetic and highly motivated with a strong sense of urgency, • Highly entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment., • Teamwork, • Creativity, • Results, • Leadership, • Stamina, • Courage, • Sense of Urgency

Job Description Job Title: Senior Estimator – Power Generation Reports to: VP of Operations Business Unit: NCC – STL Position Summary: We are seeking a detail-oriented and experienced Senior Estimator – Power Generation to support our construction and modification projects. The ideal candidate will be responsible for preparing accurate and competitive cost estimates for mechanical/civil systems in industrial environments. This role requires deep knowledge of power markets, gas, combine cycle, and nuclear systems, with strong analytical skills, and the ability to collaborate with engineering and project management teams. Key Responsibilities • Analyze blueprints, specifications, and technical documents to determine project scope and requirements., • Estimate labor, materials, equipment, and subcontractor costs for installations, • Prepare and submit bid proposals and cost breakdowns to clients and internal stakeholders., • Conduct site visits to gather data and validate project conditions., • Collaborate with project managers, engineers, and procurement teams to ensure estimates align with project goals and timelines., • Maintain and update cost databases and historical records for future reference., • Evaluate and negotiate supplier and subcontractor quotes to ensure cost efficiency., • Monitor industry trends, labor rates, and material costs to ensure accurate and competitive estimates., • Identify risk factors and potential cost overruns and propose mitigation strategies., • Work Experience:, • Minimum 3–5 years of experience in mechanical/civil estimating, • Education:, • Bachelor's degree in a relevant field or equivalent professional experience applicable to the role., • Knowledge and Skills:, • Proficiency in estimation software with ability to learn and adapt to our proprietary estimation tool., • Experience with Primavera 6 software is a plus., • Strong understanding of industrial safety standards and mechanical modification requirements., • Excellent analytical, mathematical, and communication skills., • Ability to read and interpret complex blueprints and schematics., • Certified Professional Estimator (CPE) or similar certification is a plus. Job Posted by ApplicantPro

Job Description Make your mark on local infrastructure. Oates Associates is a 100% employee-owned civil and structural engineering firm dedicated to designing thoughtful infrastructure that strengthens the communities we serve. We combine strong client relationships with technical expertise to turn concepts into reality. Oates Associates offers a work environment that encourages and supports you during your career development journey. To accommodate our continued growth, we are seeking a motivated and energetic individual for a civil engineering project management position. This position is ideal for a civil engineer that enjoys working on a team, working with clients, and bringing in work on building and site development, drainage, utility, parks and recreation, roadway, trail and campus development projects. Work will be out of our Collinsville, IL and/or St. Louis, MO offices. Key Responsibilities • Meet with clients and potential clients to discuss projects, • Actively participate in team meetings to work effectively with team members, • Apply industry-standard practices to complete work on time, • Develop person-hour estimates and proposals, • Manage scope, schedule, and budgets on multiple projects, • Perform and check design calculations, plans, and quantity takeoffs, • Work collaboratively with clients, engineers, and managers to develop designs, • Develop plans and construction documents, • Develop construction cost estimates, • Bachelor's degree in civil engineering - master's degree is a plus, • PE license, • 5+ years of experience working with both government and private clients in Missouri and Illinois, • Proficiency in AutoCAD Civil3D and MicroStation, • Strong verbal, writing, and presentation skills, • Strong technical skills in one or more of the following areas is a plus:, • Hydrology and Hydraulics, • Development Review for Municipalities, • Multi-Use Path and Park Design, • Commercial Site Design, • Water and Sewer Design, • 100% employee-owned through an ESOP, • Collaborative, people-first culture, • Flexible schedules and hybrid work opportunities, • Salary range: $80,000 - $115,000 annually, • Annual bonus opportunities, • 100% Employee Stock Ownership Plan (ESOP), • Comprehensive medical, dental, and vision insurance, • 401(k) with company contribution, • Flex-time and hybrid work options, • Paid time off, including holidays, • Health and wellness program with incentives, • Professional development support (licensure, training, conferences) As a 100% employee-owned firm through an Employee Stock Ownership Plan (ESOP), Oates Associates is committed to personal and professional growth and long-term success. Oates Associates is an equal opportunity/affirmative action employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other legally protected characteristic. If you're ready to take the lead on impactful civil engineering projects while growing your career, we'd love to hear from you.

Job DescriptionSalary: The Opportunity At KCI Construction, our Project Engineers play a critical role in bringing projects to life. Youll partner with Project Managers and Superintendents to support the day-to-day execution of heavy civil and DOT projectshelping ensure work is delivered safely, on schedule, and on budget. This is a hands-on role with real exposure to field operations, project controls, and team collaboration. What Youll Do • Coordinate and track submittals, shop drawings, and RFIs to keep projects moving forward, • Maintain project logs (submittals, RFIs) and ensure timely follow-up and resolution, • Track production for self-performed work and support the team in meeting productivity goals, • Measure and verify in-place quantities for unit price work, • Assist with project reporting, meeting coordination, and documentation, • Support schedule updates and participate in weekly progress meetings, • Maintain accurate as-built drawings and assist with project closeout documentation, including O&M manuals, • Collaborate with estimating and project teams as needed, • Take on additional responsibilities that support successful project delivery What You Bring • Bachelors degree in Civil Engineering, Construction Management, or related field, • 13 years of construction experience preferred (internships count), • Exposure to highway/roadway or heavy civil projects is a plus, • Ability to read and interpret construction drawings and specifications, • Strong organization, time management, and attention to detail, • Effective communication skills and a collaborative mindset, • Proficiency in Microsoft Office; experience with P6 and/or Vista is a plus What Sets You Apart (KCI GRiT) • Growth: Eager to learn, develop, and take on new challenges, • Resilience: Adapts quickly and follows through in a fast-paced environment, • Integrity: Does the right thingalways, • Teamwork: Builds strong relationships and supports the success of the team Why KCI? • 100% Employee-Owned (ESOP) Share in our success, • Competitive pay, bonuses, and industry-leading benefits (including 100% paid health coverage), • Unlimited PTO that supports real work-life balance, • Opportunity to work on meaningful infrastructure projects that impact communities KCI is proud to be an Equal Employment Opportunity and Affirmative Action Employer. We consider all qualified applicants without regard to race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable federal, state, or local law

Job Description Quality Control Manager (QCM), Federal Construction Location & Employment Type Columbus, GA Full-Time, Onsite, Federal Project Assignment About the Role We are seeking an experienced Quality Control Manager (QCM) to support federal government construction projects in the Columbus, GA area. This role is critical to ensuring all construction activities comply with contract documents, USACE standards, EM 385 requirements, and applicable federal regulations. The QCM will serve as the primary point of contact for quality-related matters and will work closely with the Project Manager, Superintendent, subcontractors, and government representatives. Key Responsibilities * Develop, implement, and manage the Contractor Quality Control (CQC) Plan in accordance with USACE and DoD requirements * Conduct and document the Three-Phase Control Process: Preparatory, Initial, and Follow-Up Inspections * Review and manage submittals, RFIs, and quality documentation for compliance with contract specifications * Perform daily quality control inspections across all phases of construction including civil, structural, architectural, and MEP work * Prepare and submit daily QC reports, inspection logs, deficiency tracking, and corrective action documentation * Coordinate and lead preparatory meetings, initial inspections, and quality coordination meetings * Interface directly with Government QA personnel and participate in inspections, audits, and site walks * Ensure work is executed in accordance with approved plans, specifications, and safety standards * Track deficiencies, oversee corrective actions, and verify closeout compliance * Support project closeout activities including punch lists, as-builts, and final inspections What We’re Looking For * Minimum 5 years of experience as a Quality Control Manager on federal construction projects * Demonstrated experience working on USACE, NAVFAC, or other DoD projects * Strong knowledge of federal construction standards, quality processes, and documentation requirements * Experience coordinating with government inspectors and contracting officers * Ability to manage multiple features of work and maintain organized quality records * Strong communication skills and attention to detail Required Certifications & Qualifications * USACE Construction Quality Management (CQM) for Contractors Certification * OSHA 30-Hour Construction Safety Certification * Working knowledge of EM 385-1-1 safety standards * Ability to pass federal background requirements and site access credentials * Valid driver’s license Why Join Us? * Work on stable, long-term federal government construction projects * Clear scope, defined quality standards, and structured project environments * Opportunity to work with experienced federal project teams * Competitive compensation based on experience and certifications Total Rewards & Benefits * Competitive salary or hourly compensation based on experience * Per diem, lodging, and travel support if applicable * Health insurance options and paid time off * Consistent federal project pipeline Apply Today Qualified candidates are encouraged to apply to be considered for current and upcoming federal construction projects in the Columbus, GA area. Confidential inquiries are welcome.

Job Description Duties will include managing and designing projects from concept through construction, coordination with the client, utilizing and coordinating internal resources. Qualifications: • BS in Electrical Engineering, • PE Preferred but not required, • 3+ years minimum experience, • Proficiency in Autodesk Revit preferred, • Experience with design and coordination of complex electrical systems, • Knowledge of lighting, technology and fire alarm systems, • Successful experience in project management and client interaction, • Demonstrated leadership with staff and projects, • LEED Accreditation a plus

Job Description ESSENTIAL FUNCTIONS • Always follow and help enforce safe practices and rules Climb, prune, and remove trees according to Foreperson’s directives • Load and unload trucks with logs, brush, and debris; lifts and feeds brush into brush chipper., • Work from the ground using hand saws, pole saws, pruners, hand pruners, loppers, and gas-powered chain saws, • Inspect and ensure proper working condition of all assigned tools and equipment, • Safeguard employees and public from hazards in and around the work area by enforcing safe job practices, keeping work area clean and orderly, and staying in frequent voice communication with co-workers Climbers have no direct reports. EXPERIENCE REQUIREMENTS Prior experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred; previous climbing experience is preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES • Must be able to demonstrate a working knowledge of all knots, ropes, and rigging devices used in tree trimming and removal operations, • Must be able to climb and descend trees using rope and safety saddle, • Must be able to administer and implement emergency rescue techniques, including tree rescue and all applicable first aid techniques, • Must be familiar with electrical hazards and appropriate operating procedure when in proximity to electrical conductors and aerial rescue techniques in the event of an emergency aloft, • Must be able to work and maneuver at considerable heights under varying and adverse weather conditions, • Must possess physical strength and agility, good balance, good depth perception and the ability to hear verbal instructions from a distance., • Must be able to quickly remove yourself from a potential danger area, • Must be able to obtain and maintain first-aid certification and CPR, • Must be able to wear necessary personal protective equipment (PPE) AI Usage Disclaimer: As part of our commitment to efficiency and innovation, we may use artificial intelligence (AI) tools during the recruiting and onboarding processes. These tools assist with tasks such as resume screening, interview scheduling, and communication. All decisions regarding hiring and employment are ultimately made by our human team. If you have questions or concerns about this process, please contact our HR department.

Job DescriptionMillenium Restoration is Hiring a Journeyman Carpenter Framer! Location: St. Louis, MO Schedule: Full-Time (40 hours/week) Pay Rate: $34 – $40 per hour (based on experience) Employment Type: Permanent Overview Millenium Restoration is seeking a highly skilled Journeyman Carpenter Framer to join our team in St. Louis. This role is critical to ensuring our restoration projects are structurally sound, code-compliant, and built with precision. We are looking for a professional who takes pride in craftsmanship, thrives on solving complex framing challenges, and values working within a team that respects experience and expertise. Responsibilities • Interpret and execute work based on construction drawings and blueprints, • Frame residential structures with a high level of accuracy and quality, • Install windows, exterior doors, and complex stair systems, • Work independently or with a small crew to complete projects efficiently, • Maintain a clean, safe, and organized job site, • Communicate effectively with project managers regarding progress and field updates Must-Have Qualifications: • Minimum of 15 years of professional carpentry and framing experience, • Advanced expertise in residential framing, layout, and cutting, • Proven experience installing stairs, windows, and exterior doors, • Ability to read and interpret blueprints accurately, • Must reside within 15 miles of St. Louis, MO, • Reliable transportation and personal hand tools Nice-to-Have Qualifications: • Experience with historic restoration or specialized architectural framing, • Strong problem-solving skills in remodeling or variable site conditions, • Competitive hourly pay based on experience, • Profit sharing opportunities, • Paid holidays, • Stable, full-time schedule, • Opportunity to work on high-quality restoration projects

Job DescriptionSalary: JOB SUMMARY: The Electrical Designer will develop and prepare electrical drawings. JOB DUTIES: • Develop and prepare detailed electrical engineering and construction installation drawings., • Consult with lead engineers and review project shop drawings for design accuracy., • Develop conceptual or detailed electrical designs in power distribution, lighting, low voltage systems instrumentation, and controls for a variety of industries., • Develop control panel drawings consisting of PLC panel layouts and I/O schematics., • Electrical design deliverables include electrical one lines, power and lighting plans, electrical site plans, area classification plans, & grounding plans., • Develop Revit and AutoCAD 3D & 2D models., • Apply thorough knowledge of the National Electrical Code and other applicable building codes to design projects., • Analyze mechanical and process designs by reviewing P&IDs & general arrangement drawings., • Comply with Companys Quality Control and Project Management procedures., • Promote a positive working environment in order to achieve the organizations goals., • Perform other duties as assigned. WORK ENVIRONMENT: Work is performed in a Vestal Corporation office. PHYSICAL REQUIREMENTS: • Prolonged periods of sitting at a desk and able to operate a computer and other office equipment., • Must be able to move about the office to access office equipment and other office buildings within the Vestal office complex., • This position frequently communicates with others and must be able to exchange accurate information. KNOWLEDGE / SKILL / ABILITY / EDUCATION / EXPERIENCE: • Associates or technical degree is required., • 0-5 years of experience is required., • Working knowledge of the National Electrical Code and other Building Codes is preferred., • Strong computer skills (e.g. Microsoft Office Suite, Revit, AutoCAD)., • Excellent written and verbal communication skills., • Strong working knowledge of the Electrical Construction Industry., • Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills., • Requires effective time management skills, personal conduct, and change management abilities., • Ability to effectively interact with co-workers, clients, vendors, and other business contacts., • Must comply with Vestal Corporations core values for the safe and efficient operation of the business and maintain sound relationships among and with employees.

Job Description *This is an on-site role in the St. Louis office. Curious about a career with NorthPoint? NorthPoint is a real estate developer that has grown through combining an entrepreneurial spirit and empowerment of its team members. We are looking to add a Development Associate to our growing team! NorthPoint provides an inclusive environment that cultivates collaboration and mentorship. Our core values set the foundation of our culture and guide us in every business decision. “We truly believe, and I’m convinced, we have some pretty incredible assets. But those assets have all come from our people.” - Nathaniel Hagedorn | CEO. How We Put You First At NorthPoint Development we ask a lot of our employees, which is why we give so much in return. In addition to your competitive salary, we offer market-leading benefits and perks: • A selection of comprehensive medical, dental, and vision plans, • 401k with 100% match up to 6%, immediately vested upon enrollment, • Scholarships and paid professional development, • Wellness Spending Account, • Cellphone Reimbursement, • Mental Health Reimbursement, • Childcare Reimbursement, • $2,000 annual HRA and HSA contribution, • Free catered lunches + fully stocked kitchen, • Parental Paid Leave, • Flexible Spending Account, • Support the internal project team with initial project due diligence work including opportunity evaluation, entitlement analysis, market research, project budget establishment and investment offering preparation, • Assist in the creation, tracking and management of development schedules including due diligence, entitlements, design, permitting and land closing, • Work with NorthPoint’s Capital and Asset Management teams to ensure accurate project reports are distributed to capital partners, • Assist with the coordination of consultants (civil, environmental, geotechnical, etc.), • Organize the process of identifying scope and analyzing bids from both consultants and contractors related to pre-construction site preparation, • Manage consultants and coordinate with NorthPoint team members to ensure that applications, permit submittals, and responses are delivered in a prompt manner, • Facilitate regularly scheduled progress meetings with project stakeholders throughout the development process, • Bachelor's degree in Engineering, Construction Management, Architecture or Real Estate, • 2-3 years of experience in relevant position, • Strong interpersonal communicator, • Energetic, resourceful, and hands-on individual with a strong service orientation, • Detail focused with great organizational skills, • Able to approach problems both logically and creatively, • Confident and knowledgeable when interacting with all team members & outside parties

Job Description Timberline Landscapes is hiring an experienced Install Crew Leader to manage and develop a field crew, oversee on-site install operations, and ensure projects are completed safely and efficiently. This is a hands-on, field-based role that requires leadership, technical skill, and a strong work ethic. Key Responsibilities: • Lead and train install crew members on-site, • Plan daily tasks, delegate work, and maintain high-quality standards, • Operate landscaping and construction equipment safely, • Maintain job site organization, equipment, and materials, • Communicate daily with the operations team, • Enter accurate data, timesheets, and project documentation Requirements: • 3+ years landscaping experience, • 1+ years in a leadership role, • Knowledge of hardscaping, irrigation, and LED lighting, • Valid driver’s license to operate company vehicles, • Strong communication, planning, and problem-solving skills Compensation: • $21 - $24 per hour, • Health insurance, • Life insurance, • Simple IRA, • Company events and parties, • And more... Why Timberline: We value great people and offer hands-on experience developing your crew while delivering high-quality projects. We provide training on our company methods, but prior experience is required for this role.

Job Description Looking for a familia? At LUZCO, we’re more than an engineering firm. We’re a tight-knit team of people who care deeply about what we do and who we work with. As an award-winning, woman-owned, minority-owned boutique engineering firm, we’ve built a reputation for delivering world-class work while creating a culture that feels like home. We’re proud to be a place where you can bring your authentic self to work every day and feel supported doing it. We’re proud to be recognized as a 2025 Best Place to Work in St. Louis, a reflection of our people-first mindset and our belief that work should be both challenging and fulfilling. Our mission is simple: to provide innovative engineering solutions while building genuine, lasting connections with our clients and each other. Why You’ll Love LUZCO * Benefits that take care of you: Top-notch medical, dental, and vision insurance; a competitive 401k match; generous PTO; student loan repayment assistance; and an employee recognition platform that celebrates your wins big and small. * Flexibility that fits your life: We get that life doesn’t always stick to a schedule. You’ll work with your supervisor to create a schedule that’s flexible and works for both you and the team. * Diversity that fuels innovation: Our team brings together a wide range of backgrounds, perspectives, and experiences. That diversity isn’t just something we talk about; it’s what drives our creativity and helps us find better ways to solve problems. * Growth that feels personal: Whether you’re continuing your education, earning new certifications, or stepping into new challenges, we’re here to help you grow in the direction that’s right for you. You’ll collaborate with experienced mentors and leaders who want to see you succeed. * A culture that gives back: We’re passionate about our communities. Every year, we dedicate paid time off for volunteering and encourage our team to use their talents to make a difference whether that’s mentoring students, serving local nonprofits, or getting hands-on in community projects. * A workplace that feels like you: We keep things relaxed and welcoming. Expect weekly happy hours, team lunches, a stocked kitchen, dogs in the office, and a casual dress code. It’s a space where you can be yourself and do your best work. The Role We’re looking for a detail-oriented Substation Electrical Engineer to support the design and execution of high-voltage substation projects (32.4–500kV). This role involves hands-on design work, technical documentation, and collaboration across engineering teams to ensure safe, efficient, and compliant project delivery. What Your Day Will Look Like: • Create and modify one-lines, cable schedules, BOMs, layouts, relay panel arrangements, schematics, and cable lists for high-voltage substations., • Prepare engineering and construction estimate documents for new installations or modifications to existing substations, including BOMs, RTU lists, and electrical details., • Develop and revise technical specifications for major substation equipment such as transformers, circuit breakers, and control houses., • Coordinate with other engineers to integrate protection, control, and monitoring systems., • Provide engineering and construction support throughout project phases., • Apply field mark-ups to as-built drawings and perform basic calculations (e.g., voltage drop, CT burden/saturation, lighting, short circuit) with minimal supervision., • Travel up to 25% may be required., • Perform other duties as assigned, including temporary coverage of other roles as needed. What You’ll Bring to the Familia: Essentials to Succeed: • Bachelor’s degree in Electrical Engineering required., • Minimum 2 years of experience, or 1 year with a master’s degree., • Passed FE exam or actively working toward it., • Strong knowledge of relevant codes and standards (NEC, NESC, IEEE, NEMA, ANSI) preferred., • Excellent analytical and problem-solving skills., • Strong interpersonal, verbal, and written communication abilities., • Valid driver’s license for multi-state travel. We know you might not check every single box on the job description—and that’s totally fine. At LUZCO, we care about potential, collaboration, and diverse perspectives. If you’re passionate about joining a supportive and innovative team, we encourage you to apply and show us what you can bring to the familia. Powered by JazzHR UU4RUxaLd7

Job Description We are looking to fill a full time Millwork Plant Manager position with a specialty WOOD fabricator/manufacturer supporting the construction industry located in northern Tennessee, in the general area of White House, TN. This person will be moving into a new millwork facility with 102,000 sf of shop space. Must be able to manage 75 to 100 workers across 2 or 3 shifts. Must have a strong wood fabrication background and be able to manage 45 million and growth to 80 million of millwork per year. Good communication skills dealing with Detailing, Programming, Project Managers and Installation Managers as needed to complete the work. Salary Range: · $90k to $145k per year DOE. Relocation assistance is available. Job Summary: The Plant Manager will oversee all daily operations of the plant, from production and manufacturing, to ensuring policies and procedures are followed. Will coordinate work with managers, design, and other staff in the shop to ensure products are created to meet or exceed company standards. They will develop processes that will maximize stewardship, safety, quality, and productivity. Duties/ Responsibilities: • Plan, organize, direct, and run optimum day-to-day operations to exceed our customers’ expectations, • Be responsible for production output, product quality, on-time shipping, while minimizing unnecessary costs, • Uses company software and systems to schedule and track all aspects of project production, • Provides feedback for the betterment of the program, • Review drawings and collaborate with design and project managers on an as-needed basis, • Allocate resources effectively and fully utilize assets to produce optimal results, • Implement strategies in alignment with strategic initiatives and provide a clear sense of direction and focus, • Build and maintain a trusting relationship with employees o Recruit, manage and develop plant staff o Communicate with employees about performance expectations o Provide useful feedback to employees o Ensure plant is adequately staffed • Hire and schedule staff, and ensure training and development of operators to ensure proper execution of the defined processes, • Conduct performance reviews of subordinates, which will include S.M.A.R.T (Specific, Measurable, Assignable, Realistic, Time-Related) goals, • Lead and manage the individual responsible for shop scheduling, • Monitor operations and trigger corrective actions, • Collect and analyze data to find places of waste or overtime, • Commit to plant safety procedures and rules/regulations, • Will address plant safety through continuous training and avoidance methods, • Address employee(s) issues or grievances, • Stay abreast of equipment in need of preventative monthly maintenance and schedule maintenance, repair, or replacement as needed., • Determine Key Performance Indicator (KPIs) and measure them on a regular basis, • Stay up to date with latest production trends, best practices, and technology, • Reports directly to the Chief Operating Officer Required Skills/Abilities: • Ability to work well with others on a team, • Strong attention to details, • Skillful multi-tasker Education and Experience: • Forklift certification, required., • High School Diploma or GED, preferred., • Construction experience preferred with strong knowledge and background of Millwork which is required. Physical Requirements: • Must be able to lift up to 100 pounds at times., • Must have enough manual dexterity and stability as required for precision work., • Must be willing to travel to various job sites.

Job Description This position is based in our Tulsa, OK office. Relocation to the Tulsa area is required for this role (relocation assistance is available for the right candidate) We're looking for motivated and talented individuals! This Project Engineer position can quickly shift to career path opportunities in project management or estimation. See below for more details: JOB DESCRIPTION: The Project Engineer is responsible for directly handling the acquisition, startup, and detail management of mechanical construction projects. This will require leadership and high levels of time management skills. Qualified candidates will be highly motivated, detail-oriented individuals. Quality communication skills will be required to effectively coordinate project details with the Estimator or Project Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Project Engineer will be required to perform the following tasks: • Assist in the estimating, planning, purchasing, and execution of construction projects, • Develop an understanding of project scope, contract requirements and the change order process, • Effectively communicate schedules/deadlines with both field and office personnel, • Maintain and document critical communication with clients and fellow contractors alike, • Create, maintain and manage RFI, submittal, change order and other construction logs, • Initiate, lead, document, and share project communications, including meeting notes, agendas, and drawing markups., • Create, maintain and manage project schedules, • Manage quality control procedures as required, • Efficiently complete job close-out activities such as commissioning, O&M manuals and as-built drawings, • Effectively monitor and ensure safety policies and procedures are maintained and followed, • Build positive relationships, identify areas of project risks, and advise the Project Manager and Superintendent while investigating solutions., • Act as the project liaison between all Office/Field Engineers personnel to ensure continuity of work., • Maintain a professional working relationship with clients and subcontractors, • Strong written and verbal communication skills, • Bachelor's Degree in Construction Engineering with Mechanical Emphasis OR, • Bachelor's Degree in Construction Management OR

Job Description About us ReceiveDeliverInstall was established over 50 years ago as a professional, independent installation company in St. Louis. Since then, we have maintained the family-owned culture, providing the efficiency of a large corporation with the responsiveness of a small company. We specialize in furniture installation, furniture reconfiguration, office relocation, warehousing, and receiving and delivery in Missouri & Illinois. Our core values drive our interactions, and we have a passion for fostering an environment where you can learn, grow, and advance your career. Core Responsibilities • Assemble and install commercial furniture, including desks, chairs, cabinets, panels and components, • Load and unload furniture on trucks with a high degree of caution, using protective blankets and padding as needed and securing items for transport to avoid damage and optimize space, • Install window coverings, artwork, and specialty item, • Load boxes and filing cabinets onto moving pallets, • Ensure all furniture is assembled and installed according to company standards and client specifications, • Perform quality checks to ensure all assembled furniture is free of defects and securely installed, • Proactively communicate with Lead Installer, and office staff to ensure smooth project execution, reporting status and/or issues, • Ensure the workspace is free from trash and construction material at project end, • Disassemble office furniture and load pieces onto pallets and then trucks, • Unload items from truck and transport items to new location, • Use hand tools as needed to disassemble and reassemble furniture and miscellaneous items, • Communicate with clients in a professional and respectful manner, • May drive box truck as required, • Other duties as assigned What you bring • High school diploma or equivalent, • Valid driver’s license with a clean driving record, • A positive attitude and a customer-centric focus, • Commitment to collaboration and teamwork, with a passion for excellence, • The ability to be flexible and adaptable, with a willingness to support other markets as needed., • A strong attention to detail, paired with a high level of professionalism, ensuring final results and interactions surrounding the customer exceed their expectations., • Prior experience in furniture assembly and installation preferred, • Excellent communication and customer service skills, • Ability to lift and/or move heavy objects, up to 50lbs.on a regular and consistent basis, • Ability to work extensively on one’s knees working under desktops; ability to regularly work bending, stooping, reaching, pushing and pulling What we offer • Competitive Pay with overtime hours as business needs arise, • Health Insurance, • 401(k) Plan with Company Match, • Per Diem, Travel, and Expense Reimbursements, • Opportunities for advancement Employment is contingent upon a clean driving record, a satisfactory background check, and successful completion of a pre-employment physical, back screening, and drug screening.

Job Description Position is responsible for preparing material take-offs for residential and agricultural projects, pricing special order materials and ordering materials for successful quotes. Contractor sales and service.

Job Description Summary/Objective Applies diverse and innovative techniques, modifications, and theories. Oversees and contributes to the design and preparation of plans, details, construction estimates, code compliance, design calculations, and specifications on a range of project sizes and types. Assists in leading design coordination between various team members, disciplines, and agencies to meet project requirements. Implements and executes Quality Control/Quality Assurance practices. Essential Functions • Participate in project proposals, client interview preparation, and stakeholder presentations; may attend client interviews, • Help determine the project team and staffing requirements for a given assignment or project task, • Coordinate directly with various internal and external disciplines/departments to ensure design process is complete and comprehensive, • Contribute to and supervise team members in the design concepts, studies, design options, and establish design criteria, • Perform complex analyses and design calculations, document design procedures, and assure design complies with applicable codes and standards, • Assist in leading the preparation of design documents including schematics, design details, calculations, specifications, and utility coordination, • Coordinate the production of project deliverables including plans, specifications, reports, cost estimates, and commissioning documents, • Work with project managers to assure that project schedule, budget and design are consistent with project criteria, • Coordinate and complete permit requirements, • Assist in supervising construction administration activities including resolving construction related issues, disputes, and disagreements, • Supervise the close-out documentation process with contractors, clients, and agencies and identify lessons learned for internal training purposes, • Assist in creating and enforcing the application of TERRA standards and guidelines, • Contribute to authoring marketing materials, • Develop and maintain trusted relationships with team members, multidisciplinary team members, vendors, and authorities having jurisdiction, • Mentor, train, and provide oversight to staff members, • Participate in the recruitment, interviewing, and candidate selection process, • Perform other duties as required Education/Experience • B.S. in civil engineering or related field (ABET/EAC-accredited program), • 8+ years of applicable engineering experience, • PE preferred, • PTOE Certification preferred Knowledge, Skills, and Abilities • Demonstrates ability to successfully engage with professionals in a multi-disciplinary environment; communicates effectively and builds relationships and trust internally and externally, • Exercises sound engineering judgment, • Strong ability to convey information through effective and timely verbal and written communication, • High level of proficiency with computer-aided design software and other software packages typically associated with engineering required, • Strong proficiency in general documentation software such as Microsoft Suite, Bluebeam, PowerPoint, etc., • Demonstrates effective project management skills, effectively leveraging experience and skills to ensure projects are completed on time and on budget, • Advanced public speaking, presentation, and leadership skills, • Demonstrates understanding of industry and construction practices, methodologies, and best engineering practices and leverages that understanding to lead engineering efforts through all project stages, • Able to conduct site visits as needed, may require a valid driver's license, • Effectively maintains office and field health & safety requirements and protocols, • Maintains a work schedule conducive to team collaboration and project-specific requirements Physical Requirements • Involves sitting a considerable amount of the time, but requires the ability to conduct field/site visits to inspect work, • May exert up to 20 pounds of force occasionally and/or a negligible amount of force to move objects, • Occasionally lifts and carries up to 25 pounds, • Considerable time is spent at a workstation using a computer and using various forms of communication (telephone, email, messaging, etc.), • Field work includes exposure to outside weather conditions and various environmental conditions depending on the site, • Physical activities include walking and occasional stooping and crouching This job description is not designed to cover or contain a comprehensive list of activities, duties and/or responsibilities required of the employee for this position. Duties, responsibilities, and activities may change at any time. Please note that sponsorship is not available now or in the future for this position. About TERRA Engineering TERRA Engineering, Ltd. was founded by Karen Steingraber and Jamil Bou-Saab in 1992, beginning their journey building strong relationships with clients. In 2000, Senior Vice President George Ghareeb joined the team and began overseeing operations in a then-newly opened office in Peoria, Illinois. Since then, TERRA has continued expanding our reach to broaden our markets and serve additional communities, adding offices in St. Louis (2011), Milwaukee (2013), and Bolingbrook, Illinois (2025). We are proud of our 115+ employees who contribute their talent and skills to TERRA’s success. As we continue to grow, we maintain a strong focus on the development of our team members through mentorship, collaboration, and the continual refining of our collective body of knowledge. At TERRA Engineering, our mission of enhancing communities starts from within. TERRA Provides: • Competitive compensation packages including bonus program, paid holidays and paid time off, • Comprehensive healthcare benefits, • Retirement plan options with safe harbor match and profit sharing, • Hybrid/Flexible work arrangements for most positions, • Public transportation reimbursement (Chicago-area employees), • A warm culture that is conducive to growth and professional development The employment policy of TERRA Engineering, Ltd. is to provide equal opportunity to all persons. Our company, therefore, has made a commitment to equal employment opportunity through a positive and continuing affirmative action program. No employee or applicant for employment will be discriminated against because of race, color, religion, sex, national origin, disability, military and/or veteran status, or any other Federal or State legally protected classes. TERRA Engineering, Ltd. will recruit, hire, train and promote qualified individuals in all job titles, and ensure that all other personnel actions are administered without regard to race, color, religion, sex, military and/or veteran status, or disability in accordance with Section 503 of the Rehabilitation Act of 1973, as amended, and the Vietnam Era Veterans Readjustment Assistance Act of 1974, which require affirmative action to ensure equal opportunity in all aspects of employment. TERRA Engineering, Ltd. does not discriminate on the basis of national origin or citizenship status as provided under the Immigration Reform and Control Act of 1986. Notice to Third Party Agencies TERRA does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to TERRA in the absence of a signed Service Agreement where TERRA has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of TERRA and TERRA will have the right to hire that candidate without reservation – no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. #LI-CB1

Job Description Duties will include managing and designing projects from concept through construction, coordination with the client, utilizing and coordinating internal resources Qualifications: • BS in Mechanical Engineering, • 2-5 years minimum experience in a related field, • PE or EIT required, • LEED Accreditation a plus, • Proficient with Revit MEP and AutoCAD, • Experience with design and coordination of complex mechanical systems, • Knowledge of plumbing and fire protection systems, • Successful experience in project management and client interaction, • Demonstrated leadership with staff and projects

Job Description Framing Carpenter Builder’s Bloc has opportunities for a Framing Carpenter. This is a union position with a starting salary at union scale. You will earn union-provided insurance after 500 hours of work. The generous insurance package includes medical, prescriptions, dental, vision, short-term disability, and life insurance. Insurance is provided for the entire family at no cost to the employee with low deductibles and low copays. Retirement benefits are also provided through the union. Vacation time is paid in full at the start of the year. The ideal candidate has experience using hand tools and power tools, is physically conditioned for challenging manual labor, prefers working outside, can handle working in all weather conditions, knows how to hustle to get the work done, and can handle direct, constructive feedback. We are looking for construction workers with 4 or more years of experience who can help train less experienced team members. A willingness to work hard, take feedback, learn from others, and show up every day is required! Meeting those requirements will lead to a steady career with job satisfaction. Minimum requirements include: • Ability to work independently in the job and stay on schedule, • Ability to carry, lift, or hold building materials weighing 5 to 75 pounds, • Ability to climb and work on ladders, • Flexibility with work locations and commuting, • Demonstrated ability to work outside and take direct feedback in a hardworking environment, • Demonstrated consistent attendance and strong performance in previous positions, • Personal tools are needed. Larger tools such as saws etc are provided on job, • Carrying and placing lumber, plywood, windows, doors, and tools to prepare for building, • Positioning floor joists and trusses, • Constructing and raising framed exterior and interior walls, • Installing windows and doors, • Attaching plywood roofing, • Providing training support to less experienced employees Builder’s Bloc is a locally owned, St. Louis based, union company that was founded in 1946. Many Builder’s Bloc employees have a 20+ year career with the company because of their dependability, benefits, and consistent growth. What our employees have to say: “Even during a downturn in the economy, the company always kept me working. Never had a lack of work.” “I’ve never had to worry about pay. I’ve never had to worry about work.” “You have to build up endurance. Move the lumber, wrap the Tyvek. The sooner you get that done, the sooner you can move on to the job you like. It is a very rewarding job because you can see what you have done.” “Commercial work is more impersonal. I would rather build a house. It feels like it makes more of a difference for people. There are steady hours and plenty of work.” “Employees here gain value by showing up and doing good work. Establish yourself and you have strong future.” Powered by JazzHR 0hNk1CPAfH

Job Description Federal Construction Professionals – QCM, Superintendent, SSHO, PM, Estimator, Scheduler Apply Below! Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Sourcing Quality Control Manager Construction Superintendent SSHO, Site Safety Officer Project Manager Estimator Scheduler Federal skilled trades Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form below for fastest review We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Job DescriptionSalary: The Opportunity Were seeking a Quality Engineer to support project teams in delivering work that meets the highest standards of compliance, accuracy, and performance. In this role, youll partner closely with the Quality Manager and field teams to ensure all materials, testing, and documentation align with project specifications. Youll play a key role in keeping projects organized, compliant, and moving forwardwhile building a strong foundation in heavy civil construction quality processes. Why Youll Love Working at KCI At KCI Construction, were building more than projectswere building an organization where people choose to stay and grow. • 100% Employee-Owned (ESOP): You share directly in the success you help create, • Comprehensive Benefits: Competitive pay, bonus opportunities, 401(k), and 100% paid health coverage, • Unlimited PTO: Flexibility to manage work and life in a way that works for you, • Meaningful Work: Be part of infrastructure projects that make a real impact in the communities we serve, • Strong Teams: Work alongside people who take pride in their craft and support each other, • Growth & Development: We invest in your career through training, mentorship, and real opportunity to advance, • People-First Culture: Guided by our GRiT valuesGrowth, Resilience, Integrity, and Teamwork What Youll Do Quality Coordination & Compliance • Review daily inspection reports from QC/QA inspectors for accuracy and completeness, • Track and maintain logs of all testing and inspection activities, • Verify Material Receiving Reports (MRRs) to ensure compliance with project specifications, • Monitor and track documentation to ensure timely submission and proper recordkeeping Documentation & Reporting • Enter inspection reports and testing results into project systems, • Assist in preparing quality status reports and project updates, • Support development of meeting minutes and documentation, • Assist with project closeout documentation, ensuring completeness and accuracy Project & Team Support • Coordinate schedules for QC/QA inspectors and track field time, • Participate in weekly progress and project status meetings, • Collaborate with field and office teams to maintain alignment on quality expectations, • Support additional project needs as assigned What You Bring • Bachelors degree in Civil Engineering, Construction Management, or related field, • 35 years of construction experience, preferably in heavy civil or DOT projects, • Experience supporting $10M+ projects, • Knowledge of ACI, ASTM, and AASHTO standards, • Ability to read and interpret plans and specifications, • Strong attention to detail with the ability to manage multiple deadlines, • Effective communication and interpersonal skills, • Proficiency in Microsoft Office and Primavera P6 (Vista experience a plus), • Self-starter with strong organization and time management skills What Sets You Apart (GRiT Values) • Growth: Youre committed to learning and improving every day, • Resilience: You stay organized and focused in a fast-paced environment, • Integrity: You take pride in doing work the right wayevery time, • Teamwork: You collaborate to ensure quality across every phase of the project The Bottom Line If youre detail-oriented, take pride in quality work, and want to grow your career in heavy civil construction, this is your opportunity to be part of a team that builds it right the first time. KCI Construction is an Equal Opportunity Employer. We consider all qualified applicants without regard to protected characteristics.

Job DescriptionBenefits: • Bonus based on performance, • Employee discounts, • Training & development, • Competitive salary Responsibilities • Perform drywall installation, repair, and finishing, • Ensure quality workmanship, • Communicate with customers, • Maintain and Manage materials and tools inventory of Vehicle, • Use proper techniques and safety, • Troubleshoot issues and provide solutionsRequired Qualifications, • Hands-on drywall experienceor professional painting experience, • Knowledge of drywall materials, tools, and installation methods, • Driven with an eye for detail, • Cleanliness with respect for the customer's home, • Reliable transportation and a clean driving recordAbout Hole in the Wall Drywall Repair At Hole in the Wall Drywall Repair, we're a local, trusted company specializing in restoring damaged drywall from water damage, re-pipes, and everyday wear and tear. We reward our crew with competitive wages, bonuses, consistent work year-round, a respectful work environment where craftsmanship matters, and the tools and support you need to do the job right.

Job DescriptionFindTalent is partnering with a leading boutique engineering firm to identify an experienced Senior Electrical Engineer specializing in Protection & Control (P&C) for substations. This role is essential to the successful design, planning, and execution of substation and transmission projects. The Senior Electrical Engineer will oversee P&C design, manage project schedules and budgets, mentor junior staff, and coordinate with cross-functional teams to ensure high-quality, reliable solutions for utility clients. This is an excellent opportunity for engineers passionate about delivering critical energy infrastructure and advancing their careers in a collaborative and supportive environment. Key Responsibilities: * Lead P&C design for substations and transmission line projects, including bus, line, capacitor, and transformer protection schemes. * Develop SCADA communication designs and integrate protection, control, and monitoring systems. * Prepare project scopes, cost estimates, budgets, and schedules for substation projects. * Review, create, and engineer P&C designs up to 500kV, including one-line diagrams, three-line diagrams, AC/DC schematics, panel layouts, wiring diagrams, cable schedules, relay settings, and SCADA configurations. * Conduct studies for coordination, voltage drop, fault current, and installation feasibility, and prepare associated reports. * Supervise, mentor, and provide guidance to junior engineers and designers. * Collaborate with clients, contractors, suppliers, and multidisciplinary teams to resolve design and construction issues. * Perform site visits to provide engineering support during construction and commissioning. * Manage project budgets, schedules, and documentation to ensure timely delivery of high-quality designs. * Prepare technical specifications for major substation equipment, such as transformers, circuit breakers, and control houses. * Ensure designs comply with industry standards and codes (NEC, NESC, IEEE, NEMA, ANSI). * Perform calculations including voltage drop, CT burden, lighting, and short-circuit analyses. * Participate in other duties and projects as needed, including filling in for other engineering roles when required. Required Knowledge/Skills/Abilities: * 4+ years of utility substation P&C design experience (15kV–500kV). * Bachelor of Science in Electrical Engineering (ABET/EAC accredited) or NCEES-approved evaluation for non-ABET credentials. * Strong understanding of substation and transmission P&C fundamentals. * Proficient in Microsoft Office Suite; familiarity with AutoCAD, MicroStation, and relay software preferred. * Excellent analytical, problem-solving, and communication skills. * Ability to lead projects and mentor junior staff. * Valid driver’s license for multi-state travel. * Licensed Professional Engineer (PE) or ability to obtain PE within one year. Preferred Qualifications: * 5–10 years of substation P&C design experience. * Experience with SEL or GE relays, SCADA systems, and communications interfaces. * Knowledge of substation grounding and lightning protection design. * Proficiency in software tools such as ETAP, ASPEN, acSELerator, SKM, WinIGS, CYME, CAPE, or GE URsetup. * Experience leading large or complete substation design projects. Why Choose FindTalent? FindTalent connects skilled professionals with meaningful opportunities in the energy sector. By partnering with leading firms, we provide roles that foster career growth, mentorship, and the chance to work on impactful infrastructure projects. Join a collaborative, inclusive, and growth-focused environment where your expertise drives real-world solutions. FindTalent is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive workplace.

Job Description Now Hiring: Engineers & Project Professionals - Join Our Growing Team! Mechanical | Electrical | Applications | Project Engineers | Project Managers | Construction Managers At Gillespie & Powers, we aren't just a company - we're a tight-knit, family-owned business united by a common drive for success and growth. With a legacy of over 80 years in our industry, we've maintained our status as a trusted leader while continually expanding our presence and influence. Our unwavering dedication to quality, innovation, and customer satisfaction has always been the bedrock of our achievements. We are always looking for exceptional talent across a range of disciplines, including mechanical and electrical engineering, applications and project engineering, project management, and construction leadership. Whether you're designing systems, managing complex industrial projects, or leading on-site execution, your contributions will be integral to our continued success. Why Join Us? At Gillespie & Powers, you'll find more than a job-you'll discover a rewarding career with opportunities to make a real impact. Our team thrives on collaboration, creativity, and technical excellence. You'll be part of exciting projects, solve challenging problems, and work in a supportive environment where your ideas are valued and your professional growth is encouraged. If you're looking for a thrilling and challenging opportunity where your skills and experience can drive innovation and shape the future, we want to hear from you! Employee Benefits: * Company Paid Medical - Family Coverage * Dental Insurance * Company Paid Vision - Employee * Company Paid Long Term Disability * Company Paid Short Term Disability * Company Paid Life Insurance * 401(k) Retirement Plan * Profit Sharing * 11 Paid Holidays * Generous Paid Time Off (PTO) Package Apply today to become part of our story-and help us build the future.

Job Description Cochran is a growing civil engineering firm with 7 Missouri offices, offering services in construction administration, materials testing, architectural and geotechnical engineering, and land surveying. Serving both public and private sectors, Cochran's expertise spans municipal, commercial, residential, transportation, water/wastewater, site development, retail, planning, and interior design. With 120+ professionals, the firm delivers tailored solutions backed by deep expertise and is guided by core values of teamwork, excellence, quality, and trust—ensuring principal involvement and outstanding service throughout every project. Cochran's Fenton, Missouri location is looking for a Director of Land Surveying to join our team. Primary Responsibilities: The Director of Land Surveying is responsible for overseeing all land and geospatial survey operations, ensuring accuracy, compliance, and efficiency in data collection, analysis, and reporting. This role involves leading a team of surveyors, managing projects, implementing best practices, and collaborating with other departments to support the organization's objectives. Key Responsibilities: • Leadership & Team Management:, • Supervise, mentor, and train survey staff, ensuring high performance and professional growth, • Develop and implement departmental policies, procedures, and quality control measures, • Allocate resources effectively to meet project deadlines and objectives, • Survey Operations & Project Management:, • Oversee and coordinate all survey activities, including land, topographic, hydrographic, and geospatial surveys., • Ensure the use of modern survey techniques and technology (e.g., GPS, GIS, drones, LiDAR), • Review and validate survey data, maps, and reports for accuracy and compliance, • Manage multiple survey projects, ensuring efficiency and timely delivery, • Compliance & Quality Assurance:, • Ensure all survey work complies with industry regulations, legal standards, and safety protocols, • Maintain quality assurance and control across all survey activities, • Stay updated on relevant laws, codes, and emerging trends in surveying, • Collaboration & Stakeholder Management:, • Work closely with engineers, architects, construction managers, and other stakeholders to support project needs, • Represent the survey department in meetings, providing expert guidance on survey-related matters, • Prepare and present reports, maps, and recommendations to clients and internal teams, • Technology & Innovation:, • Evaluate and implement new surveying tools, software, and methodologies, • Bachelor's degree in Surveying, Geomatics, Civil Engineering, or a related field, • Professional certification (e.g., RICS, NSPS, GISP) is a plus, • Minimum of 7-10 years of experience in surveying, with at least 3-5 years in a leadership role, • Strong knowledge of surveying instruments (GPS, Total Stations, Drones, LiDAR, GIS), • Proficiency in survey-related software (AutoCAD Civil 3D, ArcGIS, Trimble, etc.), • Excellent leadership, communication, and project management skills, • Office and fieldwork environment; travel may be required for site inspections, • Competitive salary and performance-based bonuses, • 100% company paid Medical, Dental, Vision, Life, and Long-Term Disability insurance for employees, plus company deductible assistance, • 401(k) with 4% company match, • Generous PTO plan and 7 major holidays, • Continuing education and professional development support

Job Description Federal Construction Professionals – QCM, Superintendent, PM Use the link below to Apply! Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Currently looking for Quality Control Manager Construction Superintendent Project Manager Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form for fastest review Use the link below to apply! We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Job DescriptionSalary: JOB SUMMARY: The Senior Piping Designer is responsible for leading the mechanical piping scopes of work. JOB DUTIES: • Prepare mechanical piping scopes of work for select projects., • Assist with the preparation of piping deliverables and man-hour budgets for select engineering proposals and changes to active projects., • Lead piping layout and general arrangement for assigned project areas or systems., • When assigned, serve as Piping Lead for projects, coordinating piping design activities and supporting project engineering staff., • Execute and oversee piping design using AutoCAD Plant 3D and, when required, Revit., • Track piping design progress and productivity for assigned work and communicate status to project management., • Perform field observations and document existing conditions on select projects., • Coordinate directly with owners, operators, and design-build contractors to gather functional and program requirements and develop simple and elegant piping layouts that support operations, maintenance, and constructability., • Apply applicable piping codes, standards, and project specifications (e.g., ASME B31.3, hygienic piping practices, client standards) to piping layouts and deliverables., • Develop piping layouts that consider cleanability, CIP/SIP requirements, maintenance access, thermal growth, and installation sequencing., • Coordinate piping design with mechanical equipment including boilers, ammonia refrigeration systems, cooling towers, pump, and packaged process equipment., • Support coordination with all other disciplines to resolve design interfaces and layout conflicts., • Develop conceptual pipe support strategies and coordinate support requirements with structural engineering., • Review piping models, drawings, and isometrics prepared by other designers for quality, constructability, and compliance with project standards., • Provide technical guidance and mentorship to junior piping design staff., • Support responses to construction RFIs and review field change requests related to piping design., • Lead the development and maintenance of corporate piping drafting standards, templates, and best practices., • Provide proactive coordination with other disciplines to support integrated project delivery., • Comply with Companys Quality Control and Project Management procedures., • Promote a positive and professional working environment., • Perform other duties as assigned. WORK ENVIRONMENT: Work is performed in a Vestal Corporation office. PHYSICAL REQUIREMENTS: • Prolonged periods of sitting at a desk and being able to operate a computer and other office equipment., • Must be able to move about the office to access office equipment and other office buildings within the Vestal office complex., • This position frequently communicates with others and must be able to exchange accurate information. KNOWLEDGE / SKILL / ABILITY / EDUCATION / EXPERIENCE: • Associates degree is preferred., • Minium of 10 years of mechanical piping design is required., • Experience with, and understanding of, Engineering, Architecture, and Construction terminology is required., • Ability to work in a fast-paced environment., • Strong computer skills (e.g. Microsoft Office Suite, Revit, AutoCAD)., • Excellent written and verbal communication skills., • Proven ability to read and understand both 2D and 3D drawings is preferred., • Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills., • Requires effective time management skills, personal conduct, and change management abilities., • Ability to effectively interact with co-workers, clients, vendors, and other business contacts., • Must comply with Vestal Corporations core values for the safe and efficient operation of the business and maintaining sound relationships among and with employees. Tools of Sr. Industrial Mechanical Designer: • Plant 3D, • Revit, • NavisWorks, • Bluebeam, • MS Office suite of products, • WINEST, • Various other Mechanical Design applications

Job DescriptionJob Summary The Traffic Control Coordinator ensures the safe and efficient movement of vehicles and pedestrians during construction or special events. Responsibilities include developing and implementing traffic control plans that comply with local regulations and safety standards. The coordinator collaborates with law enforcement, construction teams, and event organizers to reduce disruptions and enhance public safety. Monitoring traffic flow and adjusting control measures aim to reduce congestion and prevent accidents, maintaining order and safety in busy urban environments.Essential Duties and Responsibilities• Develop and implement comprehensive traffic control plans for construction sites and special events.• Coordinate with local authorities, law enforcement, and construction teams to ensure compliance with traffic regulations.• Monitor traffic flow and adjust control measures in real-time to minimize congestion and enhance safety.• Conduct site assessments to identify potential traffic hazards and recommend appropriate solutions.• Prepare reports and documentation related to traffic control measures and incidents.Knowledge, Skills, and Abilities• Strong analytical skills to assess traffic patterns and identify potential issues.• Effective communication skills for coordination with law enforcement and construction teams.• Attention to detail to ensure compliance with safety standards when developing traffic control plans.• Preferred: Knowledge of traffic laws and regulations to support informed decision-making.Education & Experience• High school diploma or equivalent.• Valid driver's license with a clean driving record.• Experience in traffic management or a related field.• Certification in traffic control or traffic management.• Experience working with local government agencies or construction companies. #SolvoHRGlobal#LI-PROMOTED#LI-Onsite We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Title: Manual Machinist Job Description As a Manual Machinist, you will be responsible for the setup, operation, and maintenance of manual lathes, mills, grinders, and other precision machining equipment to manufacture high-quality components that meet exact specifications. You will interpret blueprints, drawings, and work orders to determine machining requirements, perform precise measurements, and confirm part accuracy using precision inspection tools. Your skills and craftsmanship will play a direct role in delivering dependable, high-quality products to our customers. Responsibilities • Set up and operate manual machining equipment including lathes, mills, and grinders., • Manufacture components to standard and special tolerances per drawings and specifications., • Utilize appropriate tooling and machine programming, which may include inserting balls into ball lock pins., • Conduct quality inspections throughout the manufacturing and assembly process., • Test assembled parts or products to ensure proper function and quality standards., • Complete additional duties within the department as assigned.Essential Skills, • Experience operating manual machining equipment., • Ability to read and interpret blueprints and drawings., • Strong attention to detail and focus on safety., • Proficiency with precision inspection tools such as calipers and micrometers., • Ability to work independently and collaboratively in a fast-paced environment.Additional Skills & Qualifications, • Previous experience in a machine shop environment., • Ability to follow instructions closely and meet required deadlines.Why Work Here? Join a company with decades of experience and a reputation for industry leadership. Be part of a people-first culture where every employee matters, and enjoy continuous growth through training, development, and promotion from within. Your contributions will directly impact customers and operations globally. Work Environment This position is based in a machine shop environment. The role requires attention to detail and safety in a fast-paced manufacturing setting. Job Type & Location This is a Contract to Hire position based out of Saint Louis, MO. Pay and Benefits The pay range for this position is $21.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Benefits/Perks • Competitive Compensation, • Health and disability insurance, • Generous Paid Time off (PTO) plan, • 401K retirement plan, • Opportunities for continuing education, • Professional-related tuition reimbursement, • Flexible Working Hours Skills • Proficient in AutoCAD Civil 3D. Must be familiar with the grading and pipes features with this software. Experience with corridors is a plus., • Proficient with design process and general engineering concepts (ADA cross slopes, maximum grading slopes, interpreting contour map, drainage areas, etc)., • Experience with storm sewer hydraulics programs - StormCAD, HydroCAD, Autodesk Storm & Sanitary, etc., • Experience with the review process in the St. Louis region (MSD, utility companies, municipalities) is a plus., • Must be self-directed and mentally engaged with ambition for learning., • Must be able to competently communicate in person and in writing. Must be willing to ask questions., • Must be able to work closely with, and creatively contribute to, and take direction from a team of professionals., • Must be willing to share knowledge and be willing to participate in all aspects of engineering design and production Qualifications, • 5-10 years' experience working on Civil Engineering plan production, • Bachelors in Civil Engineering, • Passed the Fundamentals of Engineering Exam (EI), • Licensed Professional Engineer is preferred.

Job Description We are seeking an individual with a strong work ethic who is interested in gaining an introduction to resinous floor coating and construction.

Job Description Location: St. Louis, MO Overview L&W Recruiting, Inc. is seeking a Plaintiff's Attorney to represent individuals affected by mesothelioma and other asbestos-related diseases. The position is with a nationally resourced plaintiff-side practice that emphasizes thorough case development, coordinated work with medical and investigative experts, and trial readiness. This role is suited to an attorney who can manage a substantial caseload, advocate compassionately for clients, and collaborate with colleagues and experts to achieve favorable outcomes. Key responsibilities • Manage a caseload of asbestos/mesothelioma and related plaintiff personal injury matters from intake through resolution, including factual and legal investigation, discovery, motion practice, negotiation, and trial preparation., • Draft pleadings, motions, briefs, discovery requests and responses, settlement documents, and other court filings with accuracy and timeliness., • Take and defend depositions; prepare lay and expert witnesses; coordinate with retained experts and consultants., • Handle hearings, case management conferences, mediations, and trials as required; advocate effectively in court., • Communicate regularly and compassionately with clients, families, medical providers, co‑counsel, and other stakeholders; maintain organized case files and calendaring., • Active license to practice law in Missouri., • Minimum of two (2) years of litigation experience; direct mesothelioma/asbestos litigation experience preferred., • Demonstrated litigation skills, including drafting, discovery, deposition practice, and courtroom experience., • Ability to manage a high-volume caseload while meeting deadlines and maintaining attention to detail., • Substantial trial experience or significant courtroom exposure in plaintiff-side matters., • Experience coordinating with medical and industry experts and managing complex medical and exposure evidence., • Experience in plaintiff-side personal injury practice areas such as medical malpractice, product liability, premises liability, or construction defect litigation., • Competitive salary commensurate with experience, with bonus potential., • Comprehensive benefits package typically including medical, dental, and vision coverage., • 401(k) retirement plan with employer match and performance-based incentives. Position is based in St. Louis, Missouri. Regular office presence is expected; flexible or hybrid arrangements may be available in accordance with firm policy. About the firm The client is a nationally resourced plaintiff-side law firm focused on providing high-quality, compassionate representation to individuals affected by asbestos exposure. The firm emphasizes meticulous case development, coordinated work with medical and investigative experts, and readiness for trial to secure meaningful results for clients and their families.

Job Description Federal Construction Professionals – QCM, Superintendent, SSHO, PM, Estimator, Scheduler Apply Below! Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Sourcing Quality Control Manager Construction Superintendent SSHO, Site Safety Officer Project Manager Estimator Scheduler Federal skilled trades Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form below for fastest review We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Job DescriptionSalary: About KCI Construction At KCI Construction, were not just building roads and bridges were building futures. As a self-performing, 100% employee-owned companywith more than a century of experience, we take pride in doing things the right way with integrity, teamwork, and craftsmanship. Our hands-on approach allows us to control quality, drive innovation, and deliver results that stand the test of time. Youll join a collaborative, people-focused environment where hard work is recognized, voices are heard, and growth is encouraged. Why You'll Love Working Here • Competitive Benefits: Competitive Pay, ESOP participation, 401(k), bonuses and 100% paid health coverage., • Work-Life Balance: Unlimited PTO and flexibility that supports your well-being., • Great Team: Work alongside talented builders, problem-solvers, and employees who take pride in their craft., • Community Impact: Join a company that actively gives back through volunteerism and partnerships., • Safety First: We live by our safety standards-every day on every site. The Opportunity As a Heavy Civil Estimator, youll help build the infrastructure that keeps communities connectedroads, bridges, and wastewater systems. In this role, youll translate plans into execution by developing production-driven estimates that directly impact how projects are built, staffed, and delivered. What Youll Do • Analyze plans, specifications, and bid documents to define scope, risk, and execution strategy., • Perform detailed quantity takeoffs and develop production-based cost estimates for self-performed work (earthwork, utilities, structures, concrete, and water/wastewater systems)., • Build accurate, competitive bids aligned with field operations and project sequencing., • Solicit and evaluate subcontractor and supplier quotes., • Collaborate with operations to validate means, methods, crew sizes, and production rates., • Attend pre-bid meetings, site visits, and support post-award buyout and handoff to operations., • Support DBE/MBE/WBE participation and ensure compliance with DOT, municipal, and water/wastewater authority requirements., • Continuously improve estimating practices using tools such as HCSS HeavyBid, historical cost data, and production tracking. Who You Are • Detail-oriented with a strong commitment to accuracy and accountability., • Thinks like a builderunderstands how work gets done in the field across civil and wastewater environments., • Organized and self-driven, able to manage multiple bids and deadlines., • Strong communicator who builds trust with field teams, partners, and leadership., • Analytical and production-focusedturns data into actionable, competitive estimates., • Adaptable and steady under pressure in a fast-paced bid environment., • Lives out KCIs GRiT valuesGrowth, Resilience, Integrity, and Teamwork. Qualifications & Experience • Bachelors degree in Civil Engineering, Construction Management, or related field (preferred)., • 3+ years of estimating experience in heavy civil, highway, or water/wastewater construction., • Proven experience estimating self-performed work in heavy civil., • Strong familiarity with DOT, municipal, and water/wastewater authority standards preferred., • Proficiency in HCSS HeavyBid or similar estimating software., • Working knowledge of production rates, crew composition, and equipment utilization., • Strong analytical, organizational, and communication skills with a team-first mindset. KCI is proud to be an Equal Employment Opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, material status, genetic information, national origin, disability or protection veteran status.

Job DescriptionDescription: Brahms Design is an architectural design firm. We are part of The Dover Companies, including Cedarhurst Senior Living, Dover Development, Dover Capital, Dover Health, Brahms Design and Brahms Construction. Together we design, develop, construct, and manage independent living, assisted living, and memory care communities for seniors throughout the Midwest. Brahms Design is committed to designing safe, high-quality, efficient environments that enhance the lives of our residents. Position Summary: The Project Architect, reporting directly to the Director of Architecture, is responsible for leading the development of accurate, coordinated construction documents. This role collaborates with consultants, contractors, clients, and internal teams to ensure clarity, quality, and alignment with project goals while also mentoring junior design staff and supporting overall architectural excellence. Essential Duties: The following duties are normal for this position. This list is not to be construed as exclusive or all-inclusive. Other duties may be required and assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Lead the creation of construction drawings and specifications, ensuring clarity, accuracy, and consistency across projects., • Coordinate with consultants, contractors, and client representatives to align scope, schedule and deliverables., • Partner with the Director of Architecture to track schedules, progress, and resolve technical challenges., • Collaborate with the development team to identify and integrate design opportunities that meet project objectives., • Mentor and provide technical guidance to Design Professionals to support their growth., • Review consultant documents, shop drawings, and submittals for compliance with project requirements., • Facilitate and participate in client and consultant meetings; document decisions and oversee implementation., • Assist in quality assurance and quality control reviews to maintain consistency, accuracy, and firm standards across deliverables., • Conduct site visits to observe construction progress and prepare field reports. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. • Bachelor or Master’s degree in architecture required by hire date. Degree from NAAB accredited program preferred., • Licensed Architect or actively working toward licensure., • Strong technical knowledge of building systems, codes, and detailing., • Experience producing full sets of construction documents., • Proficiency in Revit for production and coordination, and Enscape for Visualization., • Ability to coordinate across disciplines and communicate clearly with consultants and contractors with a strong commitment to serving in-house team members. As part of The Dover Company’s commitment to providing outstanding care and support, the company ensures that staff work under conditions that prioritize safety, collaboration, and professional growth. The conditions listed below define the experience of working at the Brahms Home Office. • This position may need to walk or stand for extended periods while visiting project sites., • This position may need to lift up to twenty (20) pounds., • This position may need to move through areas of the office or other worksites of the organization., • This role involves actively participating in all staff activities aimed at fostering teamwork, unity, and morale. The individual will contribute as a collaborative team player, working alongside colleagues to create a supportive and cohesive work environment., • Individuals in this position are required to stay current on all training and ongoing education initiatives. They are expected to actively pursue self-improvement and embrace opportunities for continuous learning to enhance their skills and knowledge., • This position is required to work onsite at the St. Louis Dover Companies headquarters.

Job DescriptionSalary: JOB SUMMARY: The Plumbing Engineer is responsible for leading the plumbing scope of projects from concept through construction. This role ensures that designs meet schedule, budget, quality, and client expectations while supporting company standards and mentoring junior staff. JOB DUTIES: • Develop conceptual plumbing designs from verbal direction, sketches, or models; incorporate standard notes and details into construction documents., • Take ownership of plumbing scope, ensuring accuracy, schedule adherence, budget compliance, and quality standards., • Collaborate with project managers, engineers, and construction professionals to deliver integrated, client-focused solutions., • Participate in all project phases: conceptual, schematic, design development, and construction documentation., • Perform site surveys, inspections, and evaluations of existing conditions., • Apply working knowledge of relevant building codes and standards (IPC, ASPE, EPA, NFPA, OSHA, IAPMO, FDA and USDA sanitary design guidelines, 3-A Sanitary Standards for equipment and piping, etc.) in design development., • Prepare plumbing engineering drawings, specifications, and technical details., • Incorporate hygienic design principles, including stainless steel piping, air gaps, indirect waste, and CIP/SIP systems, when needed., • Review and approve shop drawings, material submittals, and RFIs., • Provide technical guidance, quality assurance, and mentorship to junior engineers/designers., • Assist in maintaining plumbing design standards and company-wide quality control., • Adhere to company quality control and project management procedures., • Support project managers in client meetings, presentations, and proposal development., • Contribute to a positive, collaborative team environment., • Perform other related duties as assigned. WORK ENVIRONMENT: • Primarily office-based with occasional exposure to construction sites (dust, fumes, noise, hazardous materials, and varying weather conditions)., • Compliance with company safety policies and PPE requirements is mandatory. PHYSICAL DEMANDS: • Regularly required to walk, stand, use hands/fingers, handle tools, reach, climb, balance, stoop, kneel, crouch, crawl, talk, and hear., • Ability to lift and carry up to 10 lbs. on a regular basis. QUALIFICATIONS: • Bachelors degree in mechanical engineering or related field with experience in food and beverage sector a plus., • Professional Engineer (PE) license preferred., • 10+ years of plumbing design experience and engineering., • Proficiency with Revit preferred, and hydraulic calculation tools., • Experience with SCRUM and Lean Design/Construction preferred., • Strong knowledge of engineering handbooks, codes, and standards., • Proficiency in Microsoft Office Suite and related software., • Excellent problem-solving, communication, collaboration, organizational, and problem-solving skills., • Strong attention to detail and ability to manage time effectively., • Ability to travel occasionally (domestic and international); valid passport required or ability to obtain., • Commitment to upholding company core values and fostering positive professional relationships., • Familiarity with fire protection design (a plus). WHAT WE OFFER: • Competitive salary and comprehensive benefits package., • Opportunities for professional growth and leadership development., • Collaborative work environment with exposure to diverse, complex projects., • Support for continuing education and licensure.

This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $90,000 per year A bit about us: Established Electrical Contractor seeking a Foreman to join the team. Why join us? Competitive Compensation Flexibility Full Benefits Growth Opportunities Job Details Field General Foreman must be motivated, willing to lead and instruct others and be participatory in a team environment. This position requires routine interaction and communication between managers, clients, suppliers, and team members. Essential Job Functions: • Plans and supervises activities including determining the method of construction, sequencing, manpower levels, material quantities, equipment, and work schedule, • Trains and manages other field staff, • Through assigned Foremen, manages the day-to-day activities of the construction operation, • In conjunction with the Project Manager, creates and maintains project schedule; plans monitor, and reviews critical path dates and milestone schedules, • Communicates site problems, conflicts, schedules, and quality issues effectively to the Project Manager and owner, • Resolves field construction problems, • Maintains open communication between all subcontractors to ensure all required materials, equipment, inspections, etc. support project activities and project schedule, • Monitors field staff & subcontractor compliance with project safety program requirements; ensures that weekly safety inspections and toolbox talks are completed; ensures that corrective measures are implemented, • Assists the Safety Department in performing incident and/or accident investigations and follow-up, • Understands all subcontractors’ scopes; assures subcontractors maintain schedules, and quality standards to meet contract requirements, • Assists the Project Manager with subcontractor disputes, quality control, and schedule coordination, • Works with the Project Manager and owner’s representatives to ensure work complies with drawings and specifications, • Supports the Project Manager in the negotiation of claims and changes, • Provides input to Project Manager regarding cost and schedule forecasts, • Assists the Project Manager with Change Order review, • Performs project close-out and ensures punch list is completed in a timely manner, • A minimum of three years experience on construction projects in a Healthcare Foreman, • Ability to read and interpret construction documents, • Effective communication skills, • Knowledge of construction scheduling, cost control, and ability to control and supervise small to midsized groups, • Good organization, multi-tasking, leadership, and decision-making ability, • Basic computer skills preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson offers its clients a full spectrum of water and wastewater services, including a complete line of planning, design, permitting, and construction phase services. Maintaining water quality is Olsson's number one concern, and we are able to respond to a broad set of client demands in a timely and cost-effective manner. As a Water/Wastewater Leader for the St. Louis area, you will be responsible for overseeing all team operations including staff management, financial performance, project quality, and client service. This position establishes goals and objectives for the team, focuses on employee development and mentoring, and oversees client service management. This role presents the opportunity to grow a local team and build a local client base with support from local Olsson presence and nationwide water/wastewater team. Primary Responsibilities: • Establishes and communicates team objectives, develops plans and strategies that align with firmwide goals, and sets high performance expectations for the team., • Oversees and monitors staffing, utilization, and financial performance for the team, ensuring each group is operating successfully and maximizing opportunities., • Manages staff and team dynamics, fostering a collaborative work environment and a high-performance culture in which individuals and groups are positioned to grow and succeed., • Works closely with group leaders to set priorities, manage workloads, and resource allocation, and ensure groups are accomplishing goals and contributing to strong team performance., • Oversees client service management, delivering continuous client satisfaction and implementing high client service standards for the team., • Holds ultimate responsibility for team's financial performance, project management activities, and quality of project deliverables., • Leads efforts to expand the team's capabilities and service offerings, identifying opportunities for growth that align with client needs and firmwide strategic objectives. Also supports the resource needs of large and complex projects outside of the team for the benefit of the firm., • Drives recruitment efforts to attract top talent, fostering a workplace environment that supports staff retention, professional development, and team success., • Evaluates team performance, identifies areas of improvement, and makes necessary adjustments to ensure successful outcomes., • Oversees marketing efforts for repeat clients and coordination with business development on new client pursuits, including client strategy, proposal process, interviewing, and selection efforts within the team., • Responsible for the performance and development of team members and conducts performance management mentoring., • Adheres to regulations and enforces safety standards. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well on a team., • Bachelor's degree in Engineering or a related area preferred. In lieu of a bachelor's degree, an associate degree with equivalent experience is required., • Minimum of ten years of related experience within an applicable field or discipline., • Must have at least six years of experience supervising technical personnel., • Must be a registered professional engineer., • Strong leadership and management skills., • Proven track record in meeting and exceeding client expectations., • Successful experience in building and maintaining strong workloads., • Ability to attract, develop, and retain talented staff who deliver results., • A detailed understanding of how the firm operates as a consulting business., • Lateral support to achieve firm goals ahead of team goals. #LI-DNP Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description At Bim.com, we connect the people who build with the products they build with. Are you ready to join this exciting journey as our newest US Sales Development Representative? Together with us, you will make a difference – both for our customers and the planet. We offer you the unique opportunity to be part of a small team within a global company of 160 employees. Within the Sales Development team, we thrive in a fast-paced and collaborative environment where curiosity, persistence, and experimentation drive success. We enjoy supporting one another, solving challenges, and working with ambitious goals. As our new Sales Development Representative, you will take the front seat in driving growth by identifying new business opportunities, engaging with prospects, and booking meetings that support our Account Executives on the US market. As our new Sales Development Representative, you will… * Identify and engage with potential customers through various methods * Strategically target accounts and build tailored outbound sequences * Work closely with the sales team to develop and optimize prospecting strategies * Maintain and update lead information in our CRM system (Salesforce) * Stay up to date with SaaS and industry trends relevant to the US construction sector We believe that you … * Have 2+ years of experience in a Sales Development Representative role or similar * Are comfortable with tools like Outreach, ZoomInfo, Nooks dialing system, and Salesforce * Are an enthusiastic, relationship-focused communicator with resilience and drive * Are not afraid to pick up the phone or explore creative strategies to generate new leads * Have a post-secondary education in business, economics, sales, or equivalent. * Are fluent in English (native level) * Willingness to travel to events and exhibitions on behalf of the company. Extra awesome (or for you to learn) * Knowledge of the building or sustainability industry * Previous experience in a SaaS company. ✨ Don’t fit every single box? We know that applying for a job can be intimidating and that experience comes in many forms. If this role looks like a great next step for you, please apply! We’d love to hear your story, even if you don’t meet 100% of the criteria. What we offer our employees * The core: A startup mentality within a stable global company, but small enough for everyone to have voice in shaping our company’s future (160+ employees). We live by our values: Raise it, Do it, Together. * Flexibility: This role is fully remote in the Malmö office, but requires the candidate to be based in the United States. While we’re a distributed team, we value collaboration and connection - whether it's through virtual check-ins or the occasional team meetup. We trust you to create a work environment that suits you best. * Growth: We invest in your development and encourage experimentation. * Inclusion: A diverse workplace where different perspectives drive innovation. More about Bim.com The industry is on a journey to build better. To succeed, the people who build need better information about the products they use. And better access to it. Bim.com is the central source of product information for the construction industry and the engine behind an ecosystem of software, tools, and services that enable the information to be used at all different stages of a construction project. By doing so, Bim.com enables those who build to make informed decisions, work smarter, and enhance the overall efficiency and quality of the construction project. Ready to join the journey? We can’t wait to meet you!

Job DescriptionJob Title: Industrial Electrician Job Description Responsible for maintaining site electrical and instrumentation equipment following the site established maintenance processes. This position will work closely with the Maintenance Department and primarily performs or assists others with planning, estimating, scheduling, and coordination functions for routine maintenance work, special orders, other major maintenance jobs, and shutdowns. Responsibilities • Maintain site electrical and instrumentation equipment., • Perform high and low voltage troubleshooting., • Troubleshoot PLCs and possess knowledge of ladder logic., • Assist with planning, estimating, scheduling, and coordinating maintenance work., • Work closely with the Maintenance Department for efficient operations.Essential Skills, • High and low voltage troubleshooting., • PLC troubleshooting and ladder logic knowledge., • Experience and understanding of NEC., • Minimum of 5 years of experience in electrical maintenance in an industrial setting.Additional Skills & Qualifications, • Journeyman papers or equivalent education and experience in mechanical fields., • Associates Degree in a related field or Electrical and/or Instrumentation Diploma/Degree or equivalent., • Proficiency in schematic reading, mechanical troubleshooting, and machine repair.Why Work Here? Enjoy union benefits, great hourly pay, and work a first shift schedule. Work Environment The work environment is very industrial, non-climate controlled, and involves working around chemical mixing and blending equipment. Employees may be required to work outside in various weather conditions. The position operates from 7am to 3:30pm, Monday to Friday. Job Type & Location This is a Permanent position based out of East Saint Louis, IL. Pay and Benefits The pay range for this position is $87152.00 - $89772.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Project Engineer - Affordable Housing/ Multi-family Construction - St. Louis, MO. This Jobot Job is hosted by: Kelly Anne Wight Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $60,000 - $85,000 per year A bit about us: Join a mission-driven general contractor specializing in affordable housing/ multifamily construction. This is a great opportunity for a Project Engineer who is looking to grow at a small/ medium sized general contractor. Here you will be responsible for developing project budgets, scopes of work, and managing subcontractor outreach. If this sounds of interest to you, please apply directly for immediate consideration. Why join us? • Competitive Base Salary, • Performance based bonus, • Health Benefits, • 401k Match, • Maternity and Paternity Leave, • 3+ weeks PTO, • Retirement Savings Plan, • Telecommuting and flexible working, • Career development opportunities, • Additional Perks Job Details Qualifications: 1. Bachelor's degree in Construction Management, Civil Engineering, or a related field., 2. Previous experience in project engineering, site engineering, RFI's, and punch lists preferred., 3. Strong understanding of construction methods, materials, and legal regulations., 4. Proficiency in project management software and MS Office Suite., 5. Exceptional organizational and multitasking skills., 6. Excellent communication and interpersonal skills., 7. Ability to work under pressure and meet tight deadlines., 8. Strong problem-solving skills and attention to detail., 9. Ability to work independently as well as part of a team., 10. Willingness to be onsite regularly and adapt to varying field conditions., 11. Valid driver's license and reliable transportation. If you are a dedicated, ambitious, and innovative professional who enjoys working in a team-oriented environment, we would love to hear from you. Join us and contribute to some of the most exciting construction projects in the industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Senior Project Manager - Commercia General Contractor - St. Louis, MO. This Jobot Job is hosted by: Kelly Anne Wight Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $130,000 - $160,000 per year A bit about us: Fantastic opportunity to work for a family-owned, design-build general contractor who is making waves in the St. Louis market. They truly value the work that they do and it shows. If you are looking for an opportunity where you can use your knowledge and skills to help a company continue to flourish and grow, this is the place for you. Why join us? • Competitive salary, • Comprehensive benefits package including medical, dental, vision, and 401(k), • Opportunities to work on diverse and challenging projects, • Collaborative and supportive work environment, • Professional development and growth opportunities Job Details • Bachelor's degree in Construction Management, Engineering, or related field, • 10+ years of experience in construction project management, • Strong leadership and communication skills, • Proficiency in construction management software, • Proven track record of successful project delivery, • Knowledge of sustainable construction practices Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Want a general labor job that starts at 7:30am?. We have immediate openings for General Labor Window Cleaners in the South County area. This is a perfect opportunity for anyone currently working as a construction or warehouse worker, laborers, restaurant and hospitality workers, cashiers, servers, l

A leading mechanical contractor is seeking a Traveling Project Manager responsible for overseeing mechanical construction projects across the United States. They will work in a fast-paced environment and ensure coordination among various teams while meeting project deadlines.

ESSENTIAL FUNCTIONS Manage all phases of electrical construction projects from pre-construction through closeout Develop and maintain project schedules, budgets, and forecasts Coordinate with superintendents, field crews, subcontractors, and suppliers Review project plans, specifications, and contra

Mentor junior underwriters and new hires on construction-specific underwriting practices and contract risk assessment.

As an underwriter, you will have a dynamic role that blends evaluating and analyzing financial and business risk, building relationships, and selling and negotiating with clients, agents, and brokers. The Associate Account Executive (AAE) will build relationships with agents and brokers to provide i

Job Description Job Title: Dietary Cook Job Description This role prepares and cooks a variety of hot and cold food items for patients, staff, and visitors in a hospital setting. The position includes both back-of-house and customer-facing duties, with shifts typically running from 6:00 a.m. to 2:30 p.m. or 10:30 a.m. to 7:00 p.m., and includes working every other weekend. You will follow standardized recipes, support tray line and food production, and help ensure a safe, clean, and efficient kitchen operation. Responsibilities • Accurately and efficiently prepare, portion, cook, and present a variety of hot and cold food items for different meal periods, including breakfast, lunch, dinner, and special or catered events., • Read, interpret, and follow basic recipes and product directions to prepare a wide range of food items consistently and safely., • Support food preparation activities such as kitchen prep, tray line assembly, and general food production for patients, staff, and visitors., • Operate cooking equipment and stations, which may include an a la carte line and/or grill station, ensuring proper portioning and presentation., • Provide customer-facing service during the 6:00 a.m. to 2:30 p.m. shift as a retail cook, preparing and serving food directly to customers in a courteous and efficient manner., • Follow food safety and sanitation standards at all times, including proper food handling, storage, labeling, and temperature control., • Maintain a clean, organized, and safe work area, including equipment, utensils, and work surfaces., • Collaborate with chefs and other kitchen staff to ensure timely meal service and smooth kitchen operations., • Attend all scheduled shifts on time with satisfactory regularity and reliability., • At least 1 year of cook experience in a foodservice, line cook, or similar kitchen role., • Proven ability to follow recipes and product directions accurately and consistently., • Experience with food preparation, tray line service, and general food production in a high-volume environment., • Knowledge of basic food safety and sanitation practices in a commercial kitchen., • Ability to operate standard kitchen equipment, including grills and other cooking stations., • Capability to work assigned shifts (6:00 a.m. to 2:30 p.m. or 10:30 a.m. to 7:00 p.m.) and every other weekend., • Team-oriented mindset with strong reliability and commitment to regular attendance., • 1–2 years of previous related experience in hospital, healthcare, or institutional foodservice is beneficial., • Experience in a retail or customer-facing cook role is an advantage., • Experience working alongside chefs or in a structured kitchen brigade is helpful., • Adaptability to changing menus, production needs, and service volumes., • Strong communication and interpersonal skills for working effectively with kitchen staff and customers. You will join a stable, climate-controlled hospital environment that offers the opportunity to grow and move up over time. Once hired on permanently, you can access a strong benefits package and enjoy the support of a team-focused culture that values reliability, safety, and professional development. Work Environment This position is based in a hospital foodservice department. You will work in a climate-controlled kitchen and retail food area, supporting both back-of-house production and customer-facing service depending on the shift. Shifts typically run from 6:00 a.m. to 2:30 p.m. or 10:30 a.m. to 7:00 p.m., with every other weekend required. The environment is fast-paced and team-oriented, with a strong emphasis on food safety, sanitation, and maintaining a healthy, safe workplace for staff and guests. Job Type & Location This is a Contract to Hire position based out of Richmond Heights, MO. Pay and Benefits The pay range for this position is $18.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.