Trabajos construction en Charleston, South Carolina - Page 3Crear alertas

Job DescriptionStructural Design Engineer LOCATION Position will be 100% onsite in Greenville, SC. (Local candidates or willing to relocate at the candidate's expense) POSITION DESCRIPTION The purpose of this position is to provide essential technical knowledge and perform engineering work as described below. This position serves as a staff engineer performing engineering assignment of intermediate complexity. • Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements, • Develop and review specifications and design criteria, • Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity, • Coordinate technical issues with other disciplines, project management, vendors and clients, • Execute work in compliance with Project Quality Plan and procedures, • Execute work in accordance with the approved project scope, cost and schedule baselines, • Establish, control and report on material key quantities; provide analysis and forecasts, • Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals, • Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes, • Other duties as assigned EDUCATION REQUIREMENTS Bachelor of Science degree in Civil or Structural Engineering and minimum five (5) years of work-related experience MINIMUM QUALIFICATIONS, • Candidate must be a U.S. Citizen., • Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards., • Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors., • Job related technical knowledge necessary to complete the job., • Intermediate knowledge of discipline codes and standards., • Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines., • Ability to attend to detail and work in a time-conscious and time-effective manner., • Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs., • Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects., • Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD). automation tools in a multi-discipline environment., • Design and analysis of steel and concrete structures (reinforced concrete and structural steel) experience OR Design and analysis of commodity supports experience., • Proficient in STAADPro, Excel, and MathCad., • Code experience with ACI 318-14, 349-13, AISC N690-18, ASCE 7-16, 4-16, 43-19 as well as experience with IBC-2018., • Ability to work in a diverse work environment., • Satisfactory results of a pre-employment screening, which includes a background check and drug screening. Discipline Specific Job Requirements, • Intermediate knowledge of performing hand and computer calculations for foundations, concrete, and steel structures, • Intermediate knowledge of one or more of the following structural design software: STAAD, STAADPro and RISA3D, • Intermediate knowledge of Mathcad, • Intermediate knowledge of:, • Analyzing complex structures, • Wind and seismic loading in structural calculations, • Dynamic analysis and design, • Computer modeling and analysis, • Blast design Desired Qualifications, • Professional Engineer license, • Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1, • Practical field experience, • EPC project experience for the following industries:, • U.S Department of Energy or other U.S. Federal Government Agency, • Nuclear facilities under a nuclear quality assurance program, • Manufacturing, pharmaceutical or biotechnology PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management’s assignment of essential functions and the descriptions listed do not restrict management’s right to assign or reassign duties and responsibilities to this job at any time. CONTRACT DURATION One (1) year with the possibility of extension/conversion.

Job Description CNC Operator – Woodworking (Custom Millwork CNC Technician) Location: North Charleston, SC Schedule: Full-time — Monday–Thursday 6:00 AM–3:30 PM; Friday 6:00 AM–12:00 PM Work Environment: In-person About MW Millworks MW Millworks is a locally owned custom millwork manufacturer specializing in high-end, architecturally accurate millwork for both new construction and impact-rated projects, with approximately 30% of our work dedicated to historic restoration. Located in North Charleston, we partner with builders, architects, and designers to produce premium- quality doors, windows, mouldings, shutters, and custom elements. Our team combines craftsmanship with precision tooling to deliver projects that enhance Charleston’s architectural landscape—whether preserving history or creating something entirely new. The Opportunity We’re seeking a CNC Operator experienced in woodworking to help produce high- quality components for our custom millwork projects. You’ll work with advanced CNC machinery to bring detailed CAD designs to life. What You’ll Do  Set up, operate, and monitor CNC machines for wood-based production.  Ensure accuracy in dimensions using measuring tools.  Follow CAD drawings to produce precise parts.  Perform quality checks on all completed work.  Collaborate with the production team to meet deadlines. Who You Are  Passionate about precision and quality craftsmanship.  Team-oriented and adaptable to shifting priorities.  Self-motivated with a focus on accuracy. Qualifications  Proven CNC machine experience in woodworking.  Proficiency with tape measures, calipers, and CAD drawings.  Strong mechanical and technical skills. Why Work With Us In-office, hands-on culture where your work makes a visible impact. Collaborative, tight-knit team passionate about craftsmanship and quality. Competitive benefits, including employer-sponsored health insurance. Stable, full-time position with consistent 40 hours and a great schedule: Monday–Thursday: 6:00 AM–3:30 PM Friday: 6:00 AM–12:00 PM (Your weekends start early!)

Job Description Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth. NOVA is seeking a Certified Welding Inspector for projects in the Charleston, SC area with some travel throughout the Carolinas. We are looking for a self-motivated individual with a positive attitude and a strong work ethic. Primary duties include performing structural steel inspections and QA/QC tests for commercial building and transportation/bridge projects. Responsibilities: • Perform Structural Inspections in accordance with code and project requirements, • Interpret project plans and specifications and ensure project requirements are being met., • Activities will include performing field testing and inspections, • Review plans and specifications, performing the inspections accordingly, • Communicate results with contractors, engineers and others, • Certified Welding Inspector (CWI) certification required, • Construction materials testing (CMT) and inspection experience is preferred In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: • Use of take-home Company Vehicle and fuel card for daily travel to work sites, • Comprehensive group medical insurance, including health, dental and vision, • Opportunity for professional growth and advancement, • Certification reimbursement and incentive program, • Paid time off, • Company-observed paid holidays, • Company paid life insurance for employee, spouse and children, • Company paid short term disability coverage, • Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection, • 401K retirement with company matching of 50% on the first 6% of employee contributions, • Wellness program with incentives About NOVA Currently, NOVA employs 650+ personnel in 18 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA’s facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent. #LI-JT

Job Description Lead Precon – Build Strategy – Shape the Future of a Top Concrete Contractor A Bit About Us: We are one of the fastest-growing concrete contractors in the country. You can find us on projects across the Southeast, working on large commercial developments, multifamily builds, warehouse facilities, and federal government work. Our expertise covers everything from tilt-up construction and expansive slabs to hardscapes and structural foundations. We’re known for delivering high-quality work, on time and on budget—and our general contractor partners bring us back again and again because of it. As we continue to scale, we’re hiring a Director of Preconstruction to lead estimating efforts and shape the next phase of our growth across the Lowcountry region. Why Join Us? Compensation Range: $100,000 – $160,000 Monthly Travel Across Charlotte, Charleston, and Savannah (Company-Paid) Work from Any Major Market in the Lowcountry Performance-Based Bonuses Full Benefits: Medical, Dental, Vision, 401(k) with Company Match Career Advancement in a Rapidly Growing Company Strong, Team-Oriented Culture with Industry Leaders What You’ll Gain: Strategic Leadership * Lead all preconstruction and estimating efforts company-wide * Drive pricing strategies, risk evaluation, and cost-saving solutions * Partner with executives on forecasting, market expansion, and operational planning High-Profile Projects * Work on large-scale commercial, multifamily, and government jobs across the Southeast * Help secure new work from top-tier GCs who trust our team’s execution Team Growth & Optimization * Help refine and standardize our estimating processes * Evaluate tools, software, and workflows to scale efficiently * Mentor and develop junior estimators as the team expands Job Responsibilities: * Oversee preparation of detailed and accurate cost estimates for concrete construction projects * Interpret project plans, specs, and structural drawings to determine scope and budget * Lead value engineering reviews, bid proposals, and client-facing presentations * Coordinate closely with project managers, subcontractors, and vendors during bid phase * Maintain and update historical cost data and market pricing benchmarks * Participate in pre-bid meetings, design development, and contract negotiations * Travel monthly to project sites or team meetings across the region Ideal Background: * 5–15+ years of concrete estimating or preconstruction leadership experience * Deep knowledge of concrete construction—tilt-up, slab-on-grade, formwork, rebar, etc. * Prior experience with large-scale commercial or government projects preferred * Proficient in estimating software (e.g., PlanSwift, Bluebeam, or similar) * Excellent leadership, communication, and analytical skills * Based in or near Charlotte, Charleston, or Savannah with willingness to travel regionally

Job Description Job Description: We are searching for a building automation control technician who is responsible for installing, commissioning, and programming building automation systems and components. This role includes evaluating the performance of building controls and HVAC systems, ensuring meticulous documentation, and managing DDC control start-up tasks. The position also involves collaborating with clients and electrical installers to ensure seamless system integration. This opportunity is open to Apprentice Level 1, Intermediate, and Expert-level technicians. If you are a Controls Technician with installation and construction experience in building automation systems, you are encouraged to apply to this ad for consideration. We look forward to reviewing your experience and speaking with you soon. Key Responsibilities: • Conduct installation and commissioning activities, including control system setup, network configuration, and equipment integration, • Program and configure DDC controls and building automation systems, • Collaborate with project managers and installation teams to complete projects on time and within budget, • Troubleshoot and resolve installation issues related to DDC control and mechanical systems, • Ensure all installation activities are performed according to project specifications and industry standards involving Building Automation Controls installation and service, • Maintain thorough and accurate documentation of installation processes and project progress, • Communicate regularly with the team (supervisor, project coordinator, account managers) and clients, • Comprehensive understanding of HVAC DDC Control Theory & Applications, • Proficiency in Alerton programming, • Proficiency or certifications in Alerton, Distech, Siemens, JCI Metasys, or Tridium are highly sought after, • Familiarity with electronics and basic electrical circuits, • Exceptional troubleshooting capabilities, • Proficiency in computer hardware and software, • Ability to work autonomously without constant supervision, • Effective communication and interpersonal skills, • AA degree in applied technology (preferred)., • Alerton, Distech, Siemens, JCI Metasys, or Tridium certifications are highly preferred, • Alternatively, a combination of relevant education and experience, • Prior experience with HVAC and/or mechanical systems in building automation systems, • Computer programming experience is a plus, • Competitive pay of $90k - $120k, dependent on experience and certifications, • Company vehicle, • Medical + Dental + Vision, • 401K + company match Joining our team means becoming part of an Employee Stock Ownership Plan (ESOP) company. If you're unfamiliar with an ESOP, you're not alone fewer than 7,000 companies in the US offer this unique benefit. Working for an ESOP is a life-changing opportunity because our benefits extend to every single employee-owner. This means that when you contribute to our success and go the extra mile to satisfy our customers, you directly share in the growth and prosperity of the company. Our ESOP empowers you to take pride in your work and enjoy the financial rewards of our collective achievements.

Job Description HM Staffing Solutions is seeking a Safety Construction Coordinator Must be Bilingual English/Spanish to work with the Superintendent and Project Manager to administer, direct, and implement compliance with the Corporate Safety and Health policies and procedures to ensure the achievement of Company standard operating procedures and goals for Safety and Health Plan. This position is responsible for the overall safety procedures on a project specific level or as assigned to project(s). Responsibilities • Conducts regular site inspections, recording safe and unsafe conditions using Predictive Solutions software, • Performs administrative tasks related to project specific safety binder and document storage systems, • Coordinates, schedules, and facilitates subcontractor's Pre-Construction Safety Planning Meetings, • Acts as a resource for field operations for Federal (OSHA) state and local safety and health regulations, • Reviews Subcontractors Site Specific Safety Programs and Job Hazard Analysis prior to subcontractor mobilization, • Periodically attends and monitors Tool Box Talks conducted by subcontractors to assure documentation and quality, • Performs accident investigations in the event of a job site accident – including collection of BE&K Safety and Health standard incident reporting forms and documentation, • Coordinates with Regional Risk Manager's for identification of claims trends and proactive risk management planning, • Reviews documentation from subcontractors for the proper training of their employees as related to the scope of work We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: • 3-5 years of related work experience in field of Construction Health and Safety. Working knowledge of Federal and State safety and health regulations, as well as local building code issues for safety and health, • Must be Bilingual English/Spanish, • Bachelor's degree in Construction or Safety preferred but not required, • Willingness to achieve CHST designation within two years, • Experience using Microsoft Office Suite, • Trained as CPR Instructor, • Ability to perform physical activities such as climbing, lifting, balancing, walking, and handling materials., • Must be able to work in various weather conditions, including extreme heat and cold., • Capable of standing and walking for extended periods., • Ability to lift and carry up to 50 pounds.

Job Description Job Description QUALITY CONTROL ENGINEER Overview Maintains and adheres to the project-specific Quality Assurance/Quality Control (QA/QC) Plan. Duties include planning, monitoring, documenting and reporting compliance with the contract documents in accordance with the project-specific QA/QC Plan. Oversee inspection throughout the duration of the project. Essential Duties & Responsibilities*: • Maintains and executes the project-specific QA/QC Plan with scopes of work and work procedures., • Develop engineering procedures, including document control, submissions management, creation and tracking of Request For Information (RFIs), material samples, documentation and tracking of potential cost changes, documentation and tracking of approved change orders, within budgetary guidelines., • Implement project-specific QA/QC Plan in coordination with the project safety plan., • Ensure strict adherence to ethics and compliance requirements at all times., • Establish and maintain working relationships with owners, architects, consultants, subcontractors and vendors to ensure that the project-specific QA/QC Plan delivers a fully compliant project., • Understand the project execution plan and coordinate Quality Control procedures at appropriate stages of the work and in line with the project schedule., • Continually improve strategies and tools to efficiently and effectively document, track and record compliance with the contract documents., • Execute the project-specific QA/QC Plan in a manner that engages all project staff, subcontractors, vendors and consultants., • Conduct testing and inspections and arrange for third-party testing and inspections. Analyze and report the results., • Expand the development of the Plan as the project progresses as appropriate to expand the program by continually improving procedures., • Oversight of the development of Daily Construction Reports (DCRs)., • Oversight of the development of punch lists., • Direct removal and replacement of, and document all non-compliant materials and/or workmanship. Document compliance after corrective work is completed prior to starting any subsequent work., • Research and apply additional Quality Control and Lean procedures to enhance the quality of project delivery. Minimum of 5 years related/relevant experience ideally from the General Contractor side of the business. • Physical Requirements:, • Ability to perform physical activities such as climbing, lifting, balancing, walking, and handling materials., • Must be able to work in various weather conditions, including extreme heat and cold., • Capable of standing and walking for extended periods., • Ability to lift and carry up to 50 pounds. Equal Employment Opportunity Statement: BE&K Building Group is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Employment is contingent upon the successful completion of a background check and drug test Job Posted by ApplicantPro

Job Description Quality Control Manager - Remote- Ideally from Charleston, SC or Augusta, GA - Home office is in Tallahassee, FL. Company Overview: This company is a leading provider of general contracting and design-build services, specializing in federal government projects. With an extensive portfolio of multi-million-dollar projects, they are committed to delivering excellence in both heavy civil and vertical construction. The teams are dedicated to building unique and complex structures and infrastructure that meet the highest safety, quality, and compliance standards. What's in it for you? • Starting Salary Range: $90,000 - $130,000 commensurate with experience, • Project Bonus, • Employer Matching 401K Plan, • Per Diem, • Health Insurance, • Vehicle Allowance, • Paid Sick Leave, • Paid Vacation, • Experience: Minimum of 7-10 years of experience in construction quality control, with at least 5 years specifically in federal government contracting., • Education: A degree in Construction Management, Civil Engineering, or a related field is preferred., • Certifications: Certification as a Construction Quality Control Manager (CQCM) for federal construction (U.S. Army Corps of Engineers or similar) is required., • Knowledge: Deep understanding of construction processes, project management, quality control protocols, and federal government contract requirements (FAR, DFARS, etc.)., • Skills: Strong communication, leadership, and problem-solving skills. Proficiency in Microsoft Office Suite and construction management software.

Job Description Overview: Geodesicx is looking for an experienced LINK-16 operator to join our team in support of the USMC Ground Communications program. Duties will include, but are not limited to, providing operational and technical expertise to assist in the development of New Equipment Training (NET) curriculum. In addition, the successful candidate will be required to participate in NET events locally, CONUS and OCONUS Education: High School diploma/GED, related military experience, or trade/industrial school graduate Experience: • 5 years professional experience operating and/or instructing operations of LINK-16., • Advanced understanding of Link-16/11/11B/4A/4C operational protocols, waveforms and architectures, • Experience with general network integration and protocols (IP, TCP & UPD), • Experience operating and maintaining various ground radios such as the PRC-117G, PRC-160, PRC-163, and PRC-167 and leverage various waveforms on these radios to distribute data, voice, and TDL capabilities., • Experience with establishing and terminating network links in accordance with mission requirements and preplanned data link setups (PDLs)., • Capable of monitoring data link performance and ensure proper integration of mission systems with no supervision., • Possess a practical understanding of engineering concepts., • Ensures that the product/service and process meet quality and safety standards., • Experience includes testing equipment to make sure that the process operates effectively and safely., • Individuals shall be able to interpret plans and drawings and contribute to the design and fabrication of test specimens., • Should have experience in computer aided drafting (CAD), ability to prepare shop drawings for model construction, and be familiar with material specifications and fabrication methods. Requirements: Active Secret Security Clearance.

Job DescriptionSalary: 22-25 Paving Screed and Skid-Steer Operator Job Responsibilities: The Paving Screed and Skid-Steer Operator is responsible for and highly skilled in the safe and efficient operation of an asphalt paver and a skid-steer with bucket, milling/planner head, broom, and other attachments. He performs equipment operation functions relating to the completion of parking lot maintenance and construction projects. He also assists with non-asphalt installation projects such as sealcoating, striping, and concrete. Skills and Qualifications: Education/Experience * High School Diploma/GED * At least 2-5 years of experience operating a skid-steer loader on road construction projects. Licensing/Registration Required:Driver's License in good standing Class A CDL is a plus Knowledge, Skills, and Abilities * Ability to comprehend, retain, and communicate complex plans. * Verifiable leadership qualities. * Proficient in operating various types of heavy mobile equipment and attachments. * Excellent oral communication skills and interpersonal skills. * Successful completion of pre-employment MVR, physical, background and drug screen. * Knowledge of materials, equipment, methods and techniques used in road construction and grade control. * Ability to work non-routine hours, when necessary. * Technology Use: Google Maps * Ability to learn quickly and use critical thinking skills. * Ability to lift/carry on a regular basis at least 50-90lbs personally. * Ability to bend, crouch, stoop, and use hand tools. * Maintain constant alertness to the multiple activities on the job site including equipment, employees, and other traffic. * Ability to comply with and identify potential safety concerns. * Ability to stand, kneel or sit for long periods of time. * Knowledge of trenching and shoring standards. * Knowledge of weight requirements of loads. * Knowledge of equipment and their uses. * Understand and apply basic mathematical skills. * Knowledge of basic measurements and how to read a tape measure. * Ability to drive a truck and trailer safely. Job Duties Screed Operation Duties (Primary Duty) * Ensure screed is level and adjust as needed prior to paving. * Inspect the paver prior to paving to ensure everything is working properly. * Assist the foreman and paver operator with planning the job. This includes determining depth requirements, water drainage direction, using a measuring wheel and measuring tape as needed to determine yield. * Assist foreman and paver operator with the layout and painting of the paving plan. * Control the yield by operating valves to regulate the flow of material at a specified rate. * Signals the paver operator to start and stop as needed. * Observes the distribution of material over road surfaces to ensure uniform distribution. * Turns screws to set the angle and depth of the screed. * Use depth gauge to verify depth specifications of the compacted asphalt. * Assist in cleaning excess asphalt off of the paver. Skid Steer Operation Duties (Secondary Duty) * Operate skid-steer safely and efficiently in road, parking lot and driveway construction and paving and milling. * Dig, spread, mill, and level construction materials. * Load dump truck with material such as millings, gravel, asphalt, etc. * Operate small power tools such as jack hammer. * Monitor and provide maintenance for all skid-steers and mini excavator, including: oil changes, greasing fittings, cleaning, checking bolts and lug nuts, etc. * Locate utilities and other buried lines prior to digging. * Supervision and participation in ensuring that work meets contract specifications. * Assist with the training of new skid-steer operators. Other PavingDuties * Loading and unloading materials * Shoveling and raking dirt, gravel, and asphalt when not needed on paver or skid-steer. * Set-up and maintenance of traffic control * Checking and maintaining painted guide lines and grade stakes * General clean-up around job site. Sealcoating Crew Duties * Clean parking lot as needed. * Assist with crack sealing, and oil spot priming. * Place sealcoating material with hand squeegee. * Assist with striping operations. Other Duties * Keep time and material records. * Maintain a positive attitude, reliable attendance, and meet company standards * Perform other miscellaneous labor duties.

Job Description Frampton Foundations About the Program Frampton Construction offers a dynamic Summer Internship Program called FOUNDATIONS. Our program is designed to provide meaningful hands-on work experiences, educational opportunities, and direct exposure to industry leaders within our organization. This program is not only a chance to gain valuable industry knowledge but also an opportunity to contribute to real projects, reflecting our core values of commitment, optimism, and dynamism. Our Mission: Empower the Best to Build the Best At Frampton Construction, our mission is to empower the best to build the best. This internship program is a pathway for talented and driven individuals to join us in this mission, offering personal growth and professional development as you work alongside our team. Whether you're studying construction, engineering, or another related field, what matters most is your commitment to hard work, learning, and making an impact. Why Frampton? Our vision is to build better lives, and we believe that starts with the development of our future leaders. Through this internship, you will: • Engage in projects that challenge and energize you., • Learn from and be mentored by seasoned professionals who are committed to your growth. Program Details • Competitive Compensation: Our internships are paid, with potential part-time opportunities available throughout the school year., • Professional Development: The program includes continuous education, company training, and mentorship to accelerate your professional journey., • Project Startup: Assist with permitting, site logistics, scheduling, and safety planning., • Documentation Management: Administer RFI and submittal processes, and maintain updated records including Contract Documents., • Project Participation: Engage in project updates, document management, material procurement, scheduling, and safety inspections., • Project Closeout: Support the closeout process, including preparing closeout documents, punch lists, and warranty documentation., • Continuous Improvement: Actively participate in ongoing education and training programs, reflecting our value of being hungry to learn and eager to teach., • Time Management: Demonstrate effective time management by prioritizing work and meeting deadlines., • Communication Skills: Exhibit strong verbal, telephone, and written communication skills., • Team Collaboration: Work well with others, fostering team morale and collaboration., • Professionalism: Maintain a neat, clean, and professional appearance., • Adaptability: Be open to constructive criticism and willing to take direction. If you are a motivated individual who is ready to contribute to building better lives through construction, we invite you to apply for our Summer Internship Program. At Frampton Construction, you won’t just be an intern—you’ll be an essential part of our team, working to empower the best to build the best. Powered by JazzHR 7kKifupRQP

Job Description Summary: Bonitz, Inc. is looking for a dynamic, Product Specialist for Resinous Flooring and Coatings projects, that would cover a regional footprint. The successful candidate will focus on consulting clients on Terrazzo, Resinous Flooring, Access Flooring Exterior Cladding, Rainscreens and other specialty offerings. Develop and sustain long-term relationships with general contractors, architects, designers, owners, end users, and internal team members across long sales cycles. This person is an expert at learning and understanding the industry, prospecting new business, cultivating a pipeline of existing business, and managing multiple projects from start to finish in a fun, unique, team environment. Overview: Founded in 1954, Bonitz, Inc. is an Employee-Owned Company operating as specialty trade commercial contractors servicing the construction industry. Bonitz designs and installs custom flooring, walls, ceilings, and cladding systems. We offer access, terrazzo and other specialty flooring as well as floor care. We are committed to providing best in class project consulting, project management, and craftsmanship while delivering superior service and practical solutions. Bonitz has divisions in SC, NC, GA, TN, VA, LA, and FL. Position Essential Duties: • Has the ability to work on multiple projects at one time from start to finish, in a fast-paced sales environment, • Develops new business and managing existing business clients, i.e. general contractors, architects, designers, owners, end users., • Takes ownership of projects from first contact through completion, and communicate throughout to internal team members and leaders, • Provides detailed and accurate work throughout the process, including the ability to read blueprints and use estimating software., • Works in an office environment, as well as in the field including on job sites., • Will possess general business acumen including developing and working an individual business, sales and marketing plan., • Visit on-going projects daily to verify correct materials and methods are being utilized, correct layout of the materials, quality of the installations, production rates, schedule progress, materials and/or equipment that may be needed for upcoming portions of the work and adherence to safety policies, • For large and/or complex projects, schedule and take part in a pre-project planning meeting to review project scope, drawings, details, installation methods, production rates, schedule, phasing, etc. with appropriate people., • Schedule and allocate daily manpower and other resources for all assigned projects, as needed to maintain required project schedules, while maximizing project efficiency, • Attend pre-bid meetings as needed. Submit RFIs to GCs as required., • Review and understand project documents including drawings, specifications, scopes of work, construction schedules, etc. Education/Experience and Ideal Candidate Qualifications: • Bachelor’s Degree preferred, • 8+ years of experience preferred, • Experience in the construction or like industry is preferred., • Excellent Verbal and Written Communication Skills, • Critical Thinking, Time Management, Organization, Attention to Detail, • Proficient Computer Skills, • Drive new business and build relationships with general contractors, architects, designers, owners, end users, and internal team members, • Maintain Labor Relations, • Professional appearance and disposition, • Ability to work with initiative and independence, as well as team environment., • Ability to identify and correct conditions that affect employee safety., • Ability to take care of customer needs while following company procedures. Safety Requirements: • Ensure that all safety training and certifications are up to date or scheduled., • Stay compliant with all Bonitz safety polices to ensure a safe and efficient workplace., • Must be committed to working safely while accomplishing all tasks., • Up to date knowledge of requirements for necessary equipment and training per job.

Job DescriptionSalary: Center Park Group, LLC is a home building company operating in the Carolinas. Our team combined has over 40 years of experience in the home building industry. Through our experience and resources, we have been fortunate to establish a close-knit, well-rounded team of individuals with ambitious goals and an eagerness to grow the company. We are pleased to announce that we are growing our team by adding a Procurement Agent to our Charleston office. Responsibilities • Evaluate trade partners for categories assigned, set up new trade partners, solicit bids, evaluate cost, build bench strength for all Center Park divisions., • Send bid packages, evaluate costs, and present findings to the Director of Purchasing., • Participate in the creation of pro-forma cost packages for potential BFR clients., • Set up options and pricing in Purchasing software (Brix by Hyphen Solutions)., • Evaluate current option pricing/margins on a quarterly basis., • Work with the design team to ensure they have the appropriate product and upgrades to meet customer demands and trends., • Evaluate and investigate VPO spend and work with Construction Managers to help solve potential issues., • Identify potential supply chain issues and assist the Director of Purchasing in finding viable solutions to these issues., • Identify and execute new and innovative ways to buyout a project through bulk buy strategies, new products and supply chain rationalization. Required Education: • High School Diploma or equivalent required., • Bachelors Degree in construction science or other related study preferred., • Drivers license required. Required Experience: • 2-3 years in the residential construction industry. EEO Statement Center Park Group is an Equal Opportunity Employer and does not discriminate on the basis of color, religion, national origin, age, genetics, disability, pregnancy, veteran status, or other legally protected status in employment opportunities and benefits.

Job DescriptionDescription: About Banks Construction Company: We are the leading single-source provider of heavy civil and asphalt paving services in the Charleston Area. We are a 3rd generation, family-owned business with deep roots in the community and focus on continuous improvement. Our Core Values are Safety, Integrity, Team, and Excellence. Our team lives out these values every day on our projects! Requirements: What is the role of Grading Division? The Grading Division is in the Construction Group. Our grading crews build the foundations for our projects. Our grading crews will build large commercial sites, widen highways and interstates, and work on special projects including building the new Hugh Leatherman Terminal for the SC Ports Authority. What is a Grading Division Light Equipment Operator? This person gets to operate a variety of earth moving equipment (i.e. sweeper trucks, rollers, front end loaders, and backhoes, off road trucks, etc.). This person will also perform other tasks associated with the grading operations. What you will get to do: • Perform tasks involving physical labor building, highway, and heavy construction projects., • Operate equipment around people and highways., • Operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments., • Prepare and stabilize soil and other material., • Maintain equipment to keep best of class standard., • May clean and prepare sites, dig trenches, set braces to support the sides of excavations, clean up rubble and debris, etc., • Communicate with team continuously to meet production and quality goals., • You have 2-3 years of experience as an operator, • You live out our core values (Safety, Integrity, Team, and Excellence), • You have a driver’s license, • You are someone that wants an opportunity to learn and grow in the heavy highway construction industry, • Being part of a people-first company that prioritizes safety and rewards high performers., • Competitive Wages, • Medical, Dental, and Vision Insurance, • Wellness Program, • Disability Insurance, • Life Insurance, • 401K with company match, • Employee Assistance Program, • Tuition Reimbursement

Job DescriptionJob Description Timmons Group is looking for a talented Civil Designer or Senior Civil Designer to join our dynamic Land Development Group in Charleston, SC. The qualified individual will perform civil site design tasks for a variety of land development projects. The complexity and fast paced nature of our client’s needs creates a dynamic environment for our team members and fosters a culture of teamwork, diverse training opportunities, and builds a sense of ownership in the successful outcome of the project. Essential Duties and Responsibilities include but are not limited to the following: • As an individual contributor, uses professional judgment to direct and independently complete assigned engineering designs., • Lead and execute civil site design tasks across diverse land development projects., • Collaborate closely with Project Managers and mentor junior engineers., • Perform QA/QC reviews and ensure technical accuracy., • Make impactful design decisions that align with client goals and project timelines., • Identify and resolve technical, scheduling, or financial challenges., • Support construction oversight and respond to contractor inquiries., • Contribute to proposals, cost estimates, and client communications., • An ideal candidate will have at least five years of civil design experience., • Intermediate to advanced AutoCAD Civil 3D required., • Strong analytical, problem-solving, and communication skills., • Ability to develop financial project management skills through assigned project work and assigned project management assignments., • Ability to manage tasks independently and as part of a team., • A proactive, professional mindset with a focus on client success.Additional Information The requirements listed are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. We are looking for high energy, creative, flexible, patient, self-starters who are willing to work at a dynamic pace. Candidates must share a commitment to our company’s Vision, Mission and Shared Values. Timmons Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or protected Veteran status. Timmons Group is a full-service engineering and technology firm recognized nationally as a “Best Firm to Work For” by CE News. With over 15 offices throughout the Mid-Atlantic and Southeast, we provide civil engineering, environmental, economic development, GIS/geospatial technology, landscape architecture, and surveying services to a diverse client base. As one of Engineering News Record’s (ENR) Top 500 Design Firms for over 30 years, we are dedicated to being an employer of choice and providing our people with the best resources, technology, and culture to help them thrive in an engaging career development setting. For more information, visit . #LI-CC1

Job DescriptionDescription: About Banks Construction Company: We are the leading single-source provider of heavy civil and asphalt paving services in the Charleston Area. We are a 3rd generation, family-owned business with deep roots in the community and focus on continuous improvement. Our Core Values are Safety, Integrity, Team, and Excellence. Our team lives out these values every day on our projects! What is the role of the Asphalt Plant Division? The Asphalt Plant Division is in the Production Group. At each facility, we unload granite stone, crush recycled asphalt, crush concrete, and produce asphalt. Requirements: What is an Asphalt Plant Equipment Operator? This person gets to operate a variety of equipment including front end loaders, trackhoes, skid steers, and demolition equipment. What you will get to do: • Operate equipment at plant facilities including but not limited to loading the plant and crusher, stacking material, and loading trucks., • Receive production and job information and then perform accordingly, • Maintain equipment to keep best of class standard, • Communicate with team continuously to meet production and quality goals, • Help with other plant facility tasks Who you are: • You have 1-2 years of experience as an operator, • You live out our core values (Safety, Integrity, Team, and Excellence), • You have a driver’s license, • You are someone that wants an opportunity to learn and grow in the heavy highway construction industry, • You value showing up to work every day and being on time What is in it for you? • Being part of a people-first company that prioritizes safety and rewards high performers., • Working for a company that invests in engaging and retaining employees through training and development, growth through advancement, wellness programs, and financial security benefits. Benefits: • Competitive Wages, • Medical, Dental, and Vision Insurance, • Wellness Program, • Disability Insurance, • Life Insurance, • 401K with company match, • Employee Assistance Program, • Tuition Reimbursement

Job Description Position Title: Sales Engineer Reports to: Sales Manager As an engineer, have you ever considered sales? A technical sales career can offer more daily variety, more challenges, more scheduling freedom, and more compensation for successful results. Make no mistake, it is a tough job and not without risk. For those who believe in themselves, it is a very rewarding career! The VALUE we bring to our clients is our ability to help THEM be more successful through our expert knowledge and outstanding customer service. We cannot do that without developing strong working relationships. At Hoffman Hydronics, we expect each salesperson to work harder than the competition at understanding our clients’ needs, prioritizing timely responses, knowing how to use our products & tools, developing our skills & talents, and becoming THE EXPERT in our field. Because we go the extra mile in every way, we earn our clients’ trust. If you are an engineer who gains great satisfaction through helping others, is curious and driven to learn more, who looks people in the eye and enjoys developing relationships, who is competitive and determined to succeed, and is unwavering in doing the right thing, then we have a career for you! Voted one of the Best Employers in NC in 2016, 2017, 2018 and 2019 by Business North Carolina Magazine, Hoffman Hydronics is actively seeking qualified sales professionals who: • Understand and leverage the sales process, • Identify and respond to customer needs, • Develop and maintain a network of contacts, an assigned customer base and a full pipeline of opportunities that assures sales goal attainment, • Utilize current and create new, innovative sales tools to effectively plan and increase business opportunity with accounts, • Ensure customer satisfaction with our products and services, • Develop and propose changes in equipment, processes, or use of materials or services which would result in cost reduction or improvement in operations, • Monitor sales trends and product performance results, • Continually enhance sales skills and product knowledge, • Value and respect relationships, • Cherish opportunities to help people, • Jump at the chance to solve challenging problems, • Upholding and adhering to Hoffman Hydronics Core Values, • Collaborating with coworkers on project strategy and execution, • Answering customer inquiries and responding to special requests, • Develop, maintain, and manage assigned client relationships, specifically with consulting & design engineers and key end-user/owner engineering department personnel, • Awareness of the local market, your competition, your clients, their clients, and their challenges, • Promoting Hoffman Hydronics products and services through sales calls, presentations, & factory visits, • Active engagement with vendor representatives through regular activity reports and joint sales calls and presentations, • Aggressive pursuit of product knowledge and systems applications, • Educating clients on product offerings and their applications, • Provide clients with equipment recommendations, selections, specifications, pricing, and any other detailed information required, • Developing and execute successful sales plans with core customers, • Maintaining records of sales, customer information and requests by updating in ERP, • Maintaining customer satisfaction by investigating concerns, implementing corrective action and communicating with customers and staff as needed, • Communicating customer perceptions by gathering customer feedback and sharing information with management, • Working closely as a team member with other parts of the business, • Bachelor’s Degree in Engineering, Business, or Construction Management from an accredited college or university or an equivalent combination of education and experience, • 3 or more years of direct industry experience and strong references required, • A strong sales presence, • Detail oriented, professional attitude, reliable, • Ability to work independently and within a team with emphasis on accuracy and timeliness, • Must possess a personal need to consistently produce accurate and thorough results, • Superior written, oral and presentation skills, • Proven problem solving, leadership and listening skills, • Product and vendor knowledge (or the ability to quickly learn it), • High technical competency with engineering-related subjects, • Well-developed interpersonal skills, • Normal office environment, • Moderate lifting may be required to move equipment, files and supplies, • Moderate travel, • Flexibility to work overtime/weekends, as required, • Standing: Frequently, • Walking: Frequently, • Sitting: Frequently, • Handling/Fingering: Frequently, • Bending: Frequently, • Pushing/Pulling 12 lbs or less: Frequently, • Lifting/Carrying 10 lbs or less: Frequently, • Lifting/Carrying 11-20 lbs: Occasionally, • Reaching Outward: Occasionally, • Reaching Above Shoulder: Occasionally EEO Employer / Vets / Disabled

Job Description Ardurra is seeking motivated and innovative students to join our South & Southeast Region team as interns! This program offers hands-on experience in civil and environmental engineering and consulting projects across our offices in the South and Southeast regions, including VA, TN, NC, SC, AL, GA, FL, and KY. Interns will collaborate with professionals on real-world projects, gaining exposure to design, analysis, fieldwork, and client-focused solutions. This is a great opportunity to develop technical skills, explore career paths, and make an impact in a supportive and growth-oriented environment. Primary Function Under general supervision, performs assignments of limited scope which require the application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks. This includes limited experience in utilizing various computer software packages and automated engineering and design tools. Primary Duties • Assists with preparing plan details and outlines, • Assists with material quantity take-off, contact vendors to obtain budgetary quotes in developing construction cost for projects, • Assists in preparation of technical specifications, • Reviews design drawings within defined limits, • Assists with preparing technical memorandum or sections, • Performs field tests & measurements, collects field data and processes data, • Currently pursuing a Bachelor’s Degree in Civil or Environmental Engineering, • Zero years of experience, • Strong organizational skills, attention to detail and work ethic, • Excellent communication skills, both written and verbal, • Team-oriented and self-motivated with the ability to work with a team of professionals and independently While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #ES-1

Job DescriptionBenefits: • Company car, • Health insurance, • Competitive Compensation, • Great Work Environment Responsibilities • Safely repair variety of large, heavy machinery safely, such as excavators, loaders, dozers, and more, • Maintain all equipment used, including cleaning and regular maintenance, • Follow best practices for all projects, • Work closely with the rest of the team on each project to ensure successQualifications, • Previous construction or heavy equipment experience desired, • Strong communication skills, • Strong attention to detail, • The ability to work well within a team environment

Job Description Maintenance Supervisor ABOUT THE CARROLL COMPANIES For over 30 years, The Carroll Companies have been committed to achieving business success by providing innovative, cost-effective real estate developments and services. Headquartered in Greensboro, NC, The Carroll Companies features a collection of enterprises specializing in diverse aspects of land development construction, ownership, management, and publication. As The Carroll Companies continue to evolve nationally and internationally, we are best known for our luxury multifamily developments, visionary mixed-use lifestyle centers, and superior storage solutions. Why Work For Ari Apartment Management? • Sole owner-owned and operated for over 20 years., • Thriving culture that promotes safety first for all of our employees., • Company uniforms provided to employees., • Paid training & certifications offered, as appropriate., • Comprehensive medical, dental and vision benefits in addition to 401K, 401K match, Short Term Disability, Long Term Disability & Life Insurance for eligible employees., • Medical Advocacy Program available to all employees., • Paid time off & Paid Holidays., • Employee Discount Program. As a Maintenance Supervisor at Ari Apartment Management, you will be responsible for overseeing the property maintenance and enhancing the overall value of the community. You will lead a maintenance team in performing preventative maintenance, responding to maintenance service requests, and performing repairs and improvements of vacant apartments to ensure they are market ready. Responsibilities: • Team Leadership:, • Hire, train, and empower maintenance staff under the Property Manager's guidance., • Foster open communication and collaboration within the team and across departments., • Maintenance Excellence:, • Manage preventive maintenance schedules and ensure site grounds are kept immaculate., • Prepare vacant apartments to market-ready standards, maximizing rentals., • Oversee vendor performance for service contracts and capital improvement projects., • Monitor and manage tool and equipment inventory., • Quality & Compliance:, • Maintain pool operations according to Health Department regulations., • Prepare accurate and timely maintenance reports., • Promptly handle emergency maintenance requests, ensuring resident safety and comfort., • Skills & Expertise:, • Execute diverse maintenance tasks, including painting, caulking, keying, appliance repairs, plumbing fixes, minor HVAC and roof repairs., • Contribute to annual budget planning and monitor expenditures responsibly., • Professionalism & Impact:, • Understand and comply with Fair Housing laws and conduct., • Represent the company with courtesy and professionalism at all times., • High school diploma or equivalent required., • Minimum 5 years hands-on maintenance experience in plumbing, electrical, carpentry, HVAC, etc., • Excellent communication, leadership, and supervisory skills., • Basic knowledge of relevant codes and regulations., • Valid driver's license, good driving record, and auto insurance required.

Job Description Our client specializes in commercial construction across the Southeast and beyond. With over 70 years of experience, a $940M annual revenue, and $900M bonding capacity, we're recognized as a Best Workplace for our culture and people-first approach. Our expertise spans sectors such as adaptive reuse, corporate, education, government, healthcare, hospitality, industrial, public assembly, retail, and site/civil. We’re seeking an experienced Assistant Superintendent to join our team. This role is responsible for overseeing day-to-day job site operations, ensuring projects are delivered on time, within budget, and to the highest quality standards. This position is in Charleston, SC. but the projects are located in Wilmington NC. Responsibilities • Lead and manage daily field operations on assigned projects., • Coordinate subcontractors, suppliers, and field staff to ensure smooth workflow., • Maintain a safe, compliant job site and promote company safety culture., • Monitor schedule and budget performance, proactively resolving issues., • Foster positive relationships with clients, trade partners, and team members., • Uphold company values of honor, humility, hospitality, and hustle in all interactions. Qualifications • Minimum 3 years of experience with Healthcare projects, ranging from $1M to $50M. Projects are located in Wilmington NC., • Strong leadership, communication, and organizational skills., • Proven ability to manage subcontractors and field teams., • Track record of delivering projects safely, on time, and within budget. Why Join Us • Competitive salaries, • Comprehensive medical, dental & prescription plans, • Health Reimbursement Account (HRA), • Matching 401(k) program, • Short & long-term disability benefits, • Paid vacation (based on position) and holidays, • Supportive, friendly work culture, • Company-sponsored social events, • Community giving & charitable programs If you share these values and are interested in joining a team that treats clients like family and buildings like a human enterprise, we’d love to hear from you.

Job Description The Quality Control Manager is responsible for planning, coordinating and developing the project specific Quality Assurance/Quality Control plan that incorporates policies and procedures necessary to deliver the project fully compliant with the contract terms of the project. Responsibilities • Partner with the project team to understand, plan, and implement the contract drawings and specifications, • Collaborate with the owner, design team, and contractors to ensure quality and timeliness of project construction and completion, • Implement and manage the "Three Phases of Control" Quality Control Plan, • Schedule and conduct quality control meetings - Preparatory, Initial Phase, Follow-up, • Control documents related to quality control functions, • Establish testing procedures in accordance with contract specifications, • Manage inspections process, • Coordinate third party testing agents and interface with the Owner's representatives as required, • Closely track and maintain a project deficiency log, • Manage the punch list process, • Oversee project closeout deliverable process-training, O&Ms, • Confer directly with the executive management team, • Undergraduate degree in a construction or related discipline or relevant experience, • Minimum 5-8+ years verifiable construction quality control and/or inspection experience, • Takes initiative and personal responsibility to always deliver value and excellence, • Uses expertise to create a vision and aligns the team to deliver/achieve desired outcomes, • A track record of establishing/contributing to creative strategic solutions, • Ability to communicate effectively with, persuade, and gain "buy-in" from, a broad range of stakeholders (leadership team, Business Unit Leader, direct reports, clients, trade partners, and third party providers), • Experience in large scale Bio-Pharma construction projects, • Prior experience developing and managing Quality Control Plans Physical Requirements: • Ability to perform physical activities such as climbing, lifting, balancing, walking, and handling materials., • Must be able to work in various weather conditions, including extreme heat and cold., • Capable of standing and walking for extended periods., • Ability to lift and carry up to 50 pounds. Equal Employment Opportunity Statement: BE&K Building Group is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Job Posted by ApplicantPro

Job Description Position Title: Mechanic 1/ Mechanic Apprentice Reports to: Shop Manager Status: Non-exempt POSITION SUMMARY: Holds a basic knowledge of all heavy machinery, various types of vehicles and small equipment. Ability to assist with all tasks that are given. Understands basic uses of tools. Helps keep up with any paperwork or tracking on equipment that is being worked on. COMPETENCIES: (Behaviors) ? Detail Oriented ? Deadline Driven ? Multitasking ? Self-Motivated ? Problem Solving ESSENTIAL DUTIES: • Have a basic knowledge of how heavy machinery, various types of vehicles and small equipment operate and function., • Has some tools for the job and keeps up with the cleanliness and organization of those tools as well as upkeep of JWC tools and organization of shop., • Assist mechanic 2, 3 and shop manager with all tasks, • Eager to learn., • Maintains cleanliness of equipment and vehicles that come into the shop for repairs, • Ensure all equipment and shop materials are safely and securely stored, • Ability to read and comprehend manuals., • Ability to be able to work independently with assigned tasks, • Maintain a positive and proactive attitude towards the job and team members, • Adhere to all company policies, • Understand that ALL employees, including mechanics, are subject to labor work when required, • ADAPT AND PROMOTE THE JWC WAY MINIMUM QUALIFICATIONS (Skills, Abilities, Knowledge): • High school or equivalent, • Ability to handle equipment in a safe and responsible manner, • Two years jobsite experience, • Ability to grade +/- .03 with dozer/trackhoe, • Ability to analyze and problem solve, • Good decision-making skills, • Effective oral and written communication skills, • Must pass a drug screen and criminal background check WORKING CONDITIONS and PHYSICAL REQUIREMENTS: The job is performed outdoors on multiple jobsites. Hearing and vision within normal ranges is essential for normal conversations, to receive ordinary information and to prepare or inspect documents. While performing the duties of this job, the employee is regularly required to travel (35%) therefore exposure to moving mechanical parts, vehicles, and common transportation related elements is present. Work hours are Monday – Thursday 7 am to 5 pm and Friday 7 am to 3 pm.

Job DescriptionSalary: $50,000 SALES MANAGER - CONSTRUCTION STAFFING SOLUTIONS If you know how to build relationships in construction and youre not afraid to chase business, we want to talk! Or if you think the construction industry would offer a fun and exciting career, wed love to train you. Were hiring a hunter-minded entry level sales manager to grow our presence in the market and Construct Lives within our community. Youll be selling skilled labor, general labor, and payroll solutions to contractors who need reliable peopleyesterday. In other words, youre selling a service people are already familiar with and NEED. What Youll Be Doing: • Prospecting and building relationships with GCs, subcontractors, and superintendents, • Meeting clients face-to-face at job sites and offices, • Consistently closing new business and expanding current accounts, • Partnering with your operations team to ensure job site coverage and client satisfaction, • Managing a book of business and growing your territory: once fully trained, you'll start your days from home and end your days at home! -Networking Events: Think golf tournaments, clay shoots, lunch & learns, etc. Whats In It for You: • Uncapped commissions + base pay = earnings that reflect your hustle, • Monthly bonuses and performance incentives, sales trips and awards, • Company vehicle, cell phone, and iPad, • Gas allowance, • Weekly expense reimbursement for lunches, networking events, sales promo, etc., • Benefits: health, dental, vision, 401k, PTO, • Backing from a team that knows how to deliver talent -An extensive training program • Career Advancement in a growing company What You Bring: • Staffing, construction, or trades-related sales is amazing BUT NOT REQUIRED!, • Youre comfortable on a construction site or walking into a GCs trailer, • Grit, hustle, and a love for face-to-face relationship building, • Organized, proactive, and motivated by commission, • Basic tech skills (CRM, email, texting platforms) About Us: Staff Zone is a nationally accredited woman and privately-owned business that believes in women working in construction! Staff Zone provides temporary workers for commercial construction, industrial, and special events companies. We are the nations leader in providing labor staffing needs to commercial construction companies with a proven record of 20% revenue growth year after year in our industry. We currently have branches in several states (AL, AZ, CO, FL, GA, SC, NC, TN, VA, and TX), and operate in many more. For more information on our company, please visit us at our website (). We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: About Banks Construction Company: We are the leading single-source provider of heavy civil and asphalt paving services in the Charleston Area. We are a 3rd generation, family-owned business with deep roots in the community and focus on continuous improvement. Our Core Values are Safety, Integrity, Team, and Excellence. Our team lives out these values every day on our projects! What is the role of the Grading Division? The Grading Division is in the Construction Group. Our grading crews build the foundations for our projects. Our grading crews will build large commercial sites, widen highways and interstates, and work on special projects including building the new Hugh Leatherman Terminal for the SC Ports Authority. What is the role of the Asphalt Paving Division? The Asphalt Paving Division is in the Construction Group. Our paving crews place asphalt on our jobs all throughout the low country. Our crews will do anything – commercial/private jobs to interstate jobs. What is a Technician? This person performs labor operations for a grading or paving crew including shoveling, hand grading, luting asphalt to grade, using power tools, assists with surveying, and assists with other grading crew operators. What you will get to do: • Learn all about the grading and paving operations, • Be a part of building large sites, highways, and ports, • Perform ground/labor operations for grading or paving crews, • Assist other personnel in all grading or paving functions, • Be a part of paving parking lots, secondary roads, ports, and interstates, • Lute asphalt to grade, • You are someone that wants an opportunity to learn and grow in the heavy highway construction industry, • You are willing to work in the heat and work longer hours (55-60 hrs per week), • Being part of a people-first company that prioritizes safety and rewards high performers., • Competitive Wages, • Medical, Dental, and Vision Insurance, • Wellness Program, • Disability Insurance, • Life Insurance, • 401K with company match, • Employee Assistance Program, • Tuition Reimbursement

Job Description Position Description The Operations Specialist plays a key role in offering administrative and logistical support for projects within the group, while also assisting other service lines and regions as necessary. This position encompasses general office tasks, providing administrative assistance to the designated region, and engaging in field work when required. Duties and Responsibilities include: • Maintain accurate project cost tracking and invoicing records through the organization of logs, files, and supporting documents, ensuring smooth cost accounting and invoicing processes., • Collaborate with the Project Administrator to provide timely project financial updates and manage invoicing procedures., • Generate monthly Work-in-Progress (WIP) reports and provide updates on costs and contracts., • Assist in tracking employee certifications to ensure compliance., • Coordinate physicals for Topside and Diver teams., • Oversee ADCI test proctoring activities., • Provide support to operations by assisting in estimating and proposals., • Participate in client communications as required, offering support to Operations Managers., • Organize and supervise transportation arrangements for personnel, assets, and supplies related to ongoing projects., • Project management support, including assistance with pre-operation submissions and reviewing/project report submissions., • Assist in tracking intents and affidavits for certified payroll purposes., • Manage new vendor setup and corresponding communications., • Manage incoming calls., • Miscellaneous office duties., • Assist Human Resources and Operations teams with facilitating new hire paperwork and onboarding. (as needed), • Other duties as assigned. Qualifications • Excellent verbal, written, and electronic communication., • Ability to interact effectively and professionally with all levels of management in addition to vendors and clients., • Customer-orientated approach to problem solving., • Solid organizational skills, including multitasking and time management., • Proficient computer skills, including but not limited to Microsoft Office Suite., • Ability to communicate with co-workers and clients effectively and professionally., • Ability to interact effectively and professionally with members of the office and operational staff. Education • High school diploma or equivalent. (required), • 5+ years’ experience in administration (preferred), • 2+ years’ experience working knowledge of commercial diving or marine construction industry experience. (preferred) Physical/Mental Requirements • Perform work in the office., • Flexibility to work after hours and weekends. (as needed), • Ability to successfully pass a pre-employment physical., • Ability to successfully pass a pre-employment drug test and a background check., • Competitive Salary, • Health, Dental and Vision Insurance, • 401k with Company Match, • PTO, • Paid Holidays Mainstream Commercial Divers, Inc is a full-service underwater inspection, construction, maintenance, and diving company. Since formation, Mainstream Commercial Divers, Inc has inspected, constructed, and maintained in-water structures of all types. Mainstream Commercial Divers, Inc is experienced in all aspects of inland commercial diving and underwater construction. Mainstream Commercial Divers, Inc is an Equal Opportunity Employer.

Job Description Overview The Dive Safety Coordinator is responsible for driving safety and health management throughout the organization through development and reinforcement of “best practice” operating procedures within the Dive Construction Business Unit (DCBU). The Dive Safety Coordinator will work in partnership with the DCBU Management Team to ensure the safety and well-being of individuals involved in activities under the DCBU portfolio and will work closely with the Company’s Safety Training Manger to develop and deliver applicable training programs. Role and Responsibilities • Assists in developing and implementing dive, construction and maritime safety programs and policies., • Ensure compliance with industry standards, regulations, and best practices related to diving, construction and maritime safety., • Conduct thorough risk assessments for DCBU operations., • Identify potential hazards and develop strategies to mitigate risks., • Stay abreast of industry regulations and standards related to diving, construction and maritime safety., • Ensure that all DCBU activities comply with local, national, and international (where applicable) regulations., • Communicate with project managers, dive teams, and other relevant stakeholders to ensure a clear understanding of safety protocols., • Collaborate with other safety professionals to integrate diving, construction and maritime safety into overall safety programs., • Conduct thorough investigations of incidents and near misses., • Implement corrective actions to prevent the recurrence of incidents., • Maintain detailed records of dive operations, including safety procedures, equipment inspections, and incident reports., • Analyze data to identify trends and areas for improvement., • Working with applicable stakeholders, establish and enforce medical fitness standards for divers., • Develop and implement emergency response plans for diving incidents., • Conduct drills and exercises to ensure that all team members are well-prepared to respond to emergencies., • Working with the Company’s Safety Training Team, coordinate and provide training for dive personnel, including divers, support staff, and supervisors., • Working with the Company’s Safety Training and Qualifications Teams, assist in ensuring that all personnel involved in diving activities hold the necessary certifications and qualifications., • Provide support in the inspection and maintenance of diving equipment to ensure it meets safety standards., • Regularly review and update dive safety procedures based on lessons learned and changes in industry standards., • Seek opportunities for continuous improvement in diving safety practices., • Participates in job site kickoffs, visits, and audits in accordance with company and client standards., • Conducts various internal safety and compliance-based assessments to audit conditions and safe work practices at jobsites., • Participate in meetings as applicable., • Attend, represent and participate in industry and client related safety meetings., • Communicate and work with various third parties, including commercial insurance brokers and providers. Qualifications and Education Requirements • Bachelor’s degree in a related field preferred., • CSP, ASP, CHST or OHST or similar designation preferred., • 3-5 years of dive or marine safety experience required; 5-8 years of dive or marine safety experience required if no degree., • Valid driver’s license. Required Experience and Skills • Travel to project sites and regional offices., • Ability to respond to afterhours emergencies., • Working knowledge of dive industry requirements for equipment., • Proficiency in Microsoft Office, internet, and other basic office applications., • Understanding of and experience with ADCI, USCG, OSHA, NFPA, DOT, EPA, and other applicable regulations., • Strong written and verbal communication skills, specifically in the English language. Preferred Skills • Ability to collaborate cross-functionally., • Self-motivated, • Ability to proactively identify issues and offer solutions., • Understanding of Worker’s Compensation, USL&H and Jones Act Claims., • Ability to work with a team and independently., • Working knowledge of Root Cause Analysis.What We Offer:, • Medical, Dental, and Vision Insurance, • Company paid Life, AD&D, and Long-Term Disability Insurance Plans, • Employee Assistance, Health Advocate, and Wellness Programs, • Generous 401(k) Plan with 4% match, • Company paid Financial Advice Program, • Career development opportunities, including our Tuition Reimbursement Program, • Paid Vacation based on years of service, • #LI-SM1

Job DescriptionCanacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Planner facilitates the submission of various planning and permitting applications, provides regular updates and reports to clients and/or project manager, and liaises with municipalities and private or government agencies so that projects are completed on time and within scope. DUTIES AND RESPONSIBILITIES: • Support the planning, permitting and land acquisition activities at all levels of government and public/private agencies for various infrastructure development, renewable energy, telecommunications, and other rights-of-way projects., • Maintain strong, professional relationships with the client and permitting authorities., • Develop and update planning and permitting application deliverables., • Obtain necessary approvals from various authorities for project to commence construction., • Support, coordinate, and conduct municipal delegations (to Councils, Boards, Committees, etc.) and facilitate public open houses, information sessions, and written forms of consultation with communities according to various processes related to project proposals., • Develop material and support facilitation for community engagement., • Research and review policies, municipal official plans, zoning by-laws, permitting and procedural by-laws for due diligence and comprehensive understanding of projects at all administrative levels., • Review colleagues’ deliverables prior to submission and provide feedback., • Develop and/or improve internal processes for better efficiency in completing deliverables and tasks., • Provide GIS and mapping , as required.Perform other duties as required. REQUIREMENTS: Education • Bachelor’s Degree and/or Postgraduate education in Urban Planning or a related discipline – a specialization and/or certification in GIS is considered an asset.Experience, • 3+ years’ experience as a planner in a related field., • Experience with real estate transactions and transmission infrastructure is considered an asset.Knowledge/Skills, • Working knowledge of local land use policies and approval processes., • Excellent analytical and problem-solving skills with a keen attention to detail., • Excellent written and verbal communication skills., • Able to organize, set priorities and handle multiple tasks in a fast-paced and changing environment., • Familiarity of transmission, renewable energy, or telecommunications projects, right of way, • Proficient in Microsoft Office Suite.Licenses/Accreditations, • A valid driver’s license is required.At Canacre, our benefits program is one of the ways in which we reinforce the value we place on employees and the role they play in helping us achieve our goals. Canacre offers comprehensive health and dental coverage, paid time off, and disability insurance. Other benefits include a 401(k) Savings Plan employer matching program, Employee Assistance Program, flexible work arrangement and a variety of wellness programs. Canacre is an equal opportunity employer, committed to a diverse workforce. Canacre complies with federal and state/provincial law governing non-discrimination in employment practices. Given the volume of applications we typically receive, we are unable to respond to all applicants, however, you will be contacted if your experience is a suitable match with one of our upcoming projects. At Canacre, we are committed to upholding the highest standards of employment practices in each jurisdiction we operate in. We ensure that all employees are fairly compensated for their work, in accordance with the provisions outlined by the Fair Labor Standards Act (FLSA). Powered by JazzHR vggxYSUvKm

Job DescriptionProject Manager – Healthcare Architecture & Engineering | $85K–$110K | General Contractor or Design/Engineering Backgrounds Welcome This Jobot Job is hosted by: Augie Ullmann Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $85,000 - $110,000 per year A bit about us: Founded nearly a decade ago and based in the Greater Philadelphia area, we are a fast-growing construction management firm specializing in high-impact, highly regulated projects across the life sciences and healthcare sectors. With additional teams operating across the East Coast, we combine technical excellence with a client-first mindset to deliver exceptional project outcomes. Why join us? • Competitive Compensation: Up to $110K base salary (DOE), • Comprehensive Benefits: Medical, Dental, Vision, • PTO & Paid Holidays, • Opportunity to Work on Critical Projects in Life Sciences and Healthcare, • Collaborative Culture and Flexible Leadership, • Stable Pipeline of Projects with Top-Tier Clients Job Details • Manage the full lifecycle of construction projects across healthcare and life sciences sectors, • Coordinate with clients, design teams, subcontractors, and internal staff to ensure project goals are met, • Monitor project budgets, timelines, and deliverables, • Review and manage RFIs, submittals, and change orders, • Ensure compliance with all safety and regulatory standards, • Assist in the development of preconstruction estimates and schedules, • Bachelor’s degree preferred but not required with relevant experience, • Minimum 2+ years of experience in construction project management, • Experience with healthcare and/or life sciences projects strongly preferred, • Strong background in managing subcontractors, cost control, and scheduling, • Familiarity with tools such as Procore, Bluebeam, or similar platforms, • Proven ability to manage multiple projects simultaneously in a fast-paced environment Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.Company DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Service Advisor Hills Machinery is seeking a service administrator. The service administrator assists the Service Department with customer service needs, opening and closing of work orders, activities in delivered of new equipment, repair, and reconditioning of the new and used trade-in equipment, daily operations of shop functions, field service function and delivery or vehicle functions. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Handles phone calls, advise customers on limited technical problems, scheduling customer service needs, adding segments to work orders containing job information and specifying job instruction, identifying customer and machine., • Assists in the appraisal and quotes of repair work coming into the shop and discusses with service manager the service required, both in parts and labor., • Assists in scheduling shop assignments, field service work, and truck requirements for pickup and delivery of equipment., • Assists in establishing or adjusting work procedures to meet schedules and deadlines., • Assists in opening and closing of work orders to ensure timely closing to meet company goals., • Valid Drivers License, • Customer Service experience, • High school diploma or equivalent with two years mechanical experience as a service technician or a combination of education or experience., • PC literate, proficient with MS Office, with an emphasis in Excel and Outlook required., • Familiarity with industrial equipment, such as construction or forestry equipment is beneficial., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence.

Job Description Job Title: Mechanic Job Description We are seeking a skilled Mechanic to conduct routine inspections and repairs on trailers, ensuring all systems are functioning optimally. The role involves maintaining and servicing trailer systems, including air brakes, suspension, electrical systems, couplers, landing gear, and decking. Responsibilities • Conduct routine inspections and repairs on trailers., • Report damages and implement corrective actions., • Maintain and service trailer systems including air brakes, suspension, electrical systems, couplers, landing gear, and decking., • Perform welding repairs in flat, horizontal, vertical, and overhead positions., • Assist with minor repairs on terminal tractors as needed., • Execute test drives to verify functionality after repairs., • Complete work orders using fleet maintenance software, accurately tracking parts and labor., • Support team members with additional repair tasks when needed., • Adhere to all safety protocols and maintain a clean, organized work area., • Experience in welding, trailer repair, and fabrication., • Familiarity with safety procedures and compliance requirements in a maintenance facility. This position offers direct placement, providing a stable and secure opportunity for growth within a supportive team environment. Employees benefit from a culture that values safety, collaboration, and professional development. Work Environment The work schedule is from 5:00 AM to 2:30 PM, Monday through Friday, with a mandatory shift on the weekend every five weeks. The environment requires adherence to safety protocols and involves working in various weather conditions. Pay and Benefits The pay range for this position is $48630.00 - $72800.00/yr. Health Care Dental Vision 401k PTO Holidays Workplace Type This is a fully onsite position in North Charleston,SC. Application Deadline This position is anticipated to close on Oct 10, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description O.L. Thompson Construction Co., Inc. Job Title: CONCRETE FINISHER, FORM SETTER Location: Charleston Metro, Tri-County Region (Dorchester, Berkeley, Charleston Counties) Full Time Employment Job Description: This position will support concrete work in the construction field. Experience with building and setting forms, sidewalks, curbs, valley, gutters, and rip rap are encouraged to apply. General Requirements: • Must be 18 years or older to work in the field., • Must be authorized to work in the United States., • Must be able to work in all types of weather and conditions which may include, rain, heat, cold, mud, dirt, dust, humidity, loud environments, and extreme temperatures. Weather may alter your work schedule., • Must bring and wear personal protective gear daily as specified site by site which may include hard hat, glasses, safety vest, ear plugs which will be provided by the company., • You must provide and wear our own long pants, work rated boot and at least a 4-inch sleeve or longer., • Must be able to reliably get to and from the jobsites on time every day in the tri-county area., • Must be able to following verbal and written instructions in English., • Must be able to work some evenings and weekends and overtime as needed or when required., • Must be able to perform repetitive heavy manual labor which may include but not limited to standing for long periods of time, sitting for long periods of time, climbing, stooping, bending, twisting, kneeling, lifting heavy items repeatedly., • Must be safety conscious and aware of your surroundings., • Must be able to pass a pre-employment drug test and ongoing quarterly testing., • Some positions require background checks and clean driving records (as specified). Specific Requirements: • Experience with concrete as a skilled tradesman., • Prefer that you have your own hand tools for carpentry and masonry work., • Knowledge of concrete work from start to finish, which will include building forms, pouring concrete, and finishing concrete., • Experience with building and setting forms, sidewalks, curbs, valley, gutters, and rip rap., • May be exposed to vehicular traffic, caution and awareness are essential., • Comply with all company policies, procedures and safety requirements., • Should have a driver’s license or REAL ID and have a clean background. This crew typically must gain access to secure sites and occasionally work nights., • It is essential to follow the directions of your supervisors. Benefits: Medical, Dental, Life Insurance, EAP, Vision, 401K with company match and Profit Sharing, Vacation and Holidays, Safety Bonus Awards, About O.L. Thompson Construction Co., Inc. Founded in 1948, O.L. Thompson Construction Co., Inc. has served as one of the tri-county area’s premier site-work construction firms. Our main emphasis is in the area of site development, material handling, and transportation; our current scope of work includes demolition, clearing, grubbing, excavation, storm drainage, sanitary sewer, potable water, concrete, curbing, asphalt paving, and material recycling & processing. We have the capabilities to perform a turnkey operation in the area of site development. For more information, please visit our website at OLTC.com. Company DescriptionO.L. Thompson Construction Co., Inc. is a sitework construction company based in Charleston, SC. Serving the tri-county area since 1948, we have the capabilities to perform a turnkey operation in the area of site development. Our work involves private, public, government, and commercial development projects. Previous project costs range from a few thousand dollars to in excess of 60 million dollars. We are a South Carolina Unlimited, Highway, General Contractor.O.L. Thompson Construction Co., Inc. is a sitework construction company based in Charleston, SC. Serving the tri-county area since 1948, we have the capabilities to perform a turnkey operation in the area of site development. \r\n\r\nOur work involves private, public, government, and commercial development projects. Previous project costs range from a few thousand dollars to in excess of 60 million dollars. We are a South Carolina Unlimited, Highway, General Contractor.

Job Description About Us Doggett Concrete Construction is a leading concrete contractor serving the Southeastern U.S. We specialize in multifamily and heavy civil projects, with a strong focus on safety, integrity, and lasting partnerships. Our team is built on collaboration, growth, and results—and we’re looking for professionals who are ready to grow with us. Our Mission: Develop people and partnerships for intentional organizational growth Our Core Values: Integrity • Determined • Collaborative Position Overview We’re hiring a Concrete Estimator with experience in heavy civil construction, particularly water/wastewater treatment plants (WTP/WWTP). This role is ideal for someone detail-oriented, strategic, and ready to work on high-impact public and private projects. What You'll Do Project Estimating * Review blueprints, specs, geotechnical reports, and addenda * Perform accurate takeoffs: concrete, rebar, formwork, embeds, accessories * Create detailed cost estimates across all phases of concrete work * Obtain and evaluate quotes from suppliers and subcontractors Bid Management * Lead the full bid process, from takeoff to final proposal * Attend pre-bid meetings and site visits * Communicate with GCs, engineers, and owners for clarification Risk & Value Analysis * Identify scope gaps, risks, and value engineering opportunities * Recommend cost-saving alternatives and schedule efficiencies Team Collaboration * Work hand-in-hand with PMs, field leaders, and operations * Support seamless project handoffs with thorough documentation Company DescriptionWith over 60 years in the concrete business, Doggett Concrete Construction works to give customers the greatest value by delivering the highest quality concrete construction services across the Southeast. Our dedication to our customers is reflected in the number of long-term relationships that we have built and continue to strengthen.With over 60 years in the concrete business, Doggett Concrete Construction works to give customers the greatest value by delivering the highest quality concrete construction services across the Southeast. Our dedication to our customers is reflected in the number of long-term relationships that we have built and continue to strengthen.

Job Description Spray Foam Genie, a family-owned business dedicated to providing exceptional service and top-quality products to our customers. Job Title: Lead Spray Technician / Field Technician Manager Position Type: Full-Time Job Description: We are seeking a highly motivated individual to join our team! In this role, you will be responsible for applying spray foam insulation, preparing structures for insulation, and driving a truck and trailer to and from job sites. You will also be responsible for coordinating with Management and other employees to complete jobs as efficiently as possible. Perfect for: Someone with commercial / industrial painting, technician, or construction experience. Don't have spray foam experience? No problem! We're here to train you the Spray Foam Genie way! Skills and Experience: • The ideal candidate should have basic mechanical skills, general carpentry skills, and basic construction knowledge., • Experience with insulation, encapsulation, waterproofing, and air sealing is highly desirable., • Backing a truck and trailer is a must-have skill., • Must be physically fit and agile, with the ability to work in tight attics and crawlspaces., • Must be able to lift at least 50 pounds consistently., • Must be able to work in hot summer conditions in a construction environment., • Must be punctual, organized, and efficient., • The candidate must also maintain a clean and professional appearance and a positive attitude., • Bilingual English/Spanish is a plus but not required., • Competitive salary, • Excellent benefits package, • Positive and supportive work environment Spray Foam Genie is an equal opportunity employer, and we welcome all qualified candidates to apply. If you require alternative methods of application or screening, please reach out to us directly, as Indeed is not responsible for the application process.

Job DescriptionSalary: $65,000 - $85,000 DOE CURTIN MARITIME-An industry disruptor creating significant changes through our core values ofEfficiency,Innovation, andIntegrity. If you are aninnovative thinker with a high level of accountability, ownership, and pride in your work, then we are looking for YOU. We are currently searching for an experienced Field Engineer (Survey) to support current and future marine construction projects. Who We Are: For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are adynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing locations on earth. What You Will Do: This position requires a 28/14 or 14/7 rotating schedule and the ability to travel to project sites. The Field Engineer (Survey) is responsible for all aspects of Survey within our marine construction projects including providing technical/operational expertise to the Operations Team. This includes the collecting, processing and reporting of all surveys to both the operations team and the Admin team. In addition, the Field Engineer (Survey) generates and reviews project survey requirements from completion to final approval. The Field Engineer is also responsible assisting the Project Manager in establishing, maintaining and performing all duties required to provide administrative support for dredging project jobsites. • Lead survey team and Manage Survey Assets (Boat, Trailer, Sonar, etc.), • Develop project plan with project management, • Capture and Utilize survey data to advise/plan daily dredge plan, • Act as the lead contact for our clients on all survey matters, • Collect and interpret data to aid both the current project and provide the bid team with production data to use as part of the bidding process What Skills You Have: Mental Aptitudes Required: • Experience in identifying and anticipating design/production work sequence conflicts required, • Excellent written and oral communication skills required, • Demonstrated knowledge of scheduling, possess an ability to monitor progress to schedule and adhere to strict deadlines required, • Willingness and ability to spend time onboard the vessel going up and down staircases and vertical ladders required, • Innovative Thinking ability to look beyond the standard solutions, • Integrity demonstrated commitment to ethical principles and guidelines, • Efficiency ability to multi-task and work efficiently in an environment with many interruptions, • Self-motivated team player with a strong work ethic, • Ability to effectively manage projects that vary in nature and scope, • Strong management and organizational skills, • Strong negotiation skills both verbal and written, • Ability to understand and execute complex oral and written instructions, • Ability to work independently with minimal or no guidance, • Ability to get along with office staff and vessel crewmembers, • Confidence to initiate correspondence with crewmembers and staff, • Must be able to read, speak, write, type, and understand English in person and over the telephone, • Work outside as well as inside in an office environment., • Must comply with all work rules, including those that pertain to safety and health Physical Aptitudes Required: • Must meet fit for duty requirements upon job offer (pre-employment physical and drug test), • The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, • Must be comfortable entering tanks and other confined spaces, • Ability to lift up to 40 pounds unassisted, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus, • Ability to work when exposed to odors, dust, dirt, mechanical hazards, high noise levels, and potentially hazardous equipment You must have the following required qualifications: • 1+ years experience in Survey, ideally hydrographic, • Computer literate and proficient in Microsoft Office desktop programs, especially MS Excel, • Familiar with AutoCAD, Hypack and/or other Survey software It would be nice for you to currently have: • Bachelors degree in Engineering or Construction Management preferred, • U.S. Passport, or ability to obtain, • Valid TWIC (or ability to get one), • Familiar with RMS 3.0 desirable, • Knowledge of MS Project or Primavera P6 desirable, • OSHA 30-Hour certification desirable, • Ability to operate small marine vessels preferred, • USACE CQC certification desirable WHAT WE OFFER: • Competitive Compensation, • Generous benefits package including:, • Medical, • Dental, • Vision, • Short-term Disability, • AD&D/Life Insurance, • 401k (with company match), • Additional option to elect incremental Life Insurance for employees and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritime is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. remote work

Job Description A Smarter Career Choice Because the internet is now the heartbeat of our homes and an essential tool for business, it should run without interruption or stress. IQ Fiber was created to offer 100% fiber-optic high-speed internet, transparent pricing, and attentive customer service to deliver a Smarter internet experience. As part of our rapidly growing team, your contributions will directly impact our success. Your work matters here. We’re looking for energetic, collaborative, and customer-focused talent with the ability to proactively move our business forward. In return, you’ll find a place where your voice matters. You’ll find a team that works hard and has fun. And, if you’re like us, you’ll know you made a Smarter career choice. Position Summary The Outside Plant Engineer is a hands-on engineering field position. The primary function is to collaborate with Construction Coordinators and Fiber Splicers to activate OLT cabinets and provide expert assistance at co-location facilities for NOC and Tier III support. This role requires excellent customer service skills and strong technical expertise in network and FTTH devices, along with a thorough understanding of designs and configurations. Key Responsibilities • Plan and execute service activations and configurations for commercial and enterprise network settings, • Perform network infrastructure tasks, including distribution construction, cable splicing, and power level verification, • Conduct system tests such as OTDR readings, optical power level, and BIP, • Provide technical support and troubleshooting for NOC and Network Engineers, • Manage firmware updates, patches, and equipment changes following change management protocols, • Collaborate with NOC, Network Engineers, and vendors on network operations and activations, • Lead plant issue resolution and implement effective troubleshooting systems, • Maintain documentation, quality standards, and OSHA compliance, • Provide 24/7 on-call support for network outages and service impairments, • Demonstrate expertise in network architecture, fiber design, and technical documentation, • Bachelor’s or Associate’s degree in Engineering or a related technical field preferred, • Must have comprehensive knowledge of network architecture, troubleshooting methods, splicing techniques, required documentation, and end-to-end processes, • Strong organizational and project management skills, • Proficient knowledge of optical networks and FTTH architecture, • Expertise with switches, routers, and OLTs, • Available for after-hours, weekend, and emergency work until outages are resolved, • Must maintain on-call readiness within local market area, • Must pass pre-employment background screening and driver’s record check, • Close vision, color vision, depth perception, and focus adjustment ability required, • Fun environment., • Fast-growing company., • All team members start accruing PTO on day one, • Company paid benefits: STD, LTD, Basic Life and EAP. IQ Fiber is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Powered by JazzHR WcOp6XwBFv

Job DescriptionSalary: COMPANY Trident Construction is one of the largest, locally owned general contractors in the Charleston, SC market. We are a company focused on our culture, our employees, and our clients. We strive to make Raving Fans of everyone involved in the project through our TEAM BUILD process. SUMMARY This individual is responsible for overseeing all aspects of the Trident Quality Control Program. This includes coordination, training, inspections (Inspect what we Expect), and day-to-day operations to ensure overall compliance with project requirements. This person will participate in and be a resource for the setup, execution, and closeout of the project specific quality control plan. SPECIFIC RESPONSIBILITIES AND TASKS • Develop and implement the Trident Quality Control Program across all projects to ensure consistency., • Develop and expand upon the program documents to continue to build the Trident QC library., • Assist with all project quality control plan organization and setup to ensure each team is prepared to execute onsite., • Conduct field inspections across all projects to ensure the quality control plan is being followed and documentation is being properly recorded., • Assist in training team members on the importance and execution of the quality control program., • Participate in project kickoff meetings with subcontractors to ensure they are bought in to the quality program., • Provide training when necessary to trade partners., • Work with the Quality Control committee to continue improvement of the quality control program., • Ensure that any non-conformance items on projects are handled properly with the Lead Superintendent on the project., • Work with all project teams to ensure that the quality control closeout procedure is completed and part of the turnover to the client., • Foster collaboration and engagement in quality initiatives., • Conduct and coordinate ongoing employee training, ensuring that our team is equipped with the knowledge and skills to turn over an exceptional product., • Ability to work in the Trident office or on a project site as required., • Ability to work days, nights, evenings, weekends as the project schedule requires. QUALIFICATIONS AND REQURIEMENTS To perform this job successfully, the individual in this position must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the minimum knowledge, skills and ability required. Education / Technical Skills and Experience • Bachelor's degree in Construction Management, Engineering, or other similar degree field, and a minimum fifteen (15) years construction experience required or equivalent number of years in a construction quality control position with heavy emphasis on building envelope., • OSHA 30 certification and First Aid certification required., • Fluency in Spanish is preferred, but not required., • Proficiency in Microsoft Office Word, Excel, PowerPoint, and Outlook., • Ability to read and understand contract documents., • Proficiency in email communication when appropriate., • Ability to work days, nights, and weekends as required by project schedule. Leadership Skills • Work both independently and collaboratively in a team setting., • Possess strong problem-solving skills and be able to assess complex situations and devise practical solutions to ensure the well-being of our team., • Demonstrate the desire to continuously seek opportunities for added responsibility and growth on the jobsite., • Effectively communicate verbally and in writing with all levels of the organization, external organizations, and customers in a timely and professional manner. Physical Requirements • Must have the ability to climb ladders, stairs, and scaffolding up to 50 tall and lift up-to 50 lbs., • Must be able to walk jobsites extensively (8-10 hours per day) and safely navigate through construction area(s)., • Must be able to sit, stand, bend, twist for extended periods of time on a daily basis., • Must have the ability to work in all temperature and weather conditions including but not limited to heat, cold, rain, wind, snow, etc. REQUIREMENTS FOR ALL APPLICANTS • Valid Driver's License and own transportation., • Must be able to pass a pre-employment drug screen., • Must be able to pass criminal background check EQUAL EMPLOYMENT OPPORTUNITY Trident Construction Resource Management, LLC (TCRM) is an equal opportunity employer, and we are committed to providing a workplace free of discrimination. It is our policy to provide job opportunities to all qualified persons without regard to race, sex, religion, age, national origin, disability, veteran or other legally protected status. This policy relates to all phases of employment, including hiring, promotion, transfer, demotion, termination, wages, benefits and conditions of employment. Decisions regarding employment and promotion shall be based solely upon an individuals qualifications and valid requirements for the position being filled and shall further the principle of equal opportunity employment.

Job Description We are seeking a skilled Pipe Foreman to join our construction team. Candidate MUST have at least 2 years of pipelaying experience, in water, sewer, and drainage. The ideal candidate will be responsible for the installation and maintenance of pipelines, ensuring that all work is completed to the highest standards of safety and quality. This role requires a strong understanding of pipelaying practices. The Pipe Foreman will work closely with other team members on various projects, including water, sewer, and storm drainage installations, while adhering to project timelines and specifications. Responsibilities • Install and maintain various types of pipelines for water, sewage, and storm drainage., • Read and interpret blueprints to determine project specifications and layout., • Test pipe runs, • Lead a crew to install water, sewer, and drainage, • Collaborate with team members to ensure efficient workflow on construction sites., • Follow safety protocols and regulations to maintain a safe working environment. Experience • Proven experience in pipelaying is a must.., • Familiarity with heavy equipment operation is preferable. Job Type: Full-time Pay: $21.00 - $30.00 per hour Company DescriptionWe are a Heavy Civil Site Contractor with 30+ years of experience in the Utilities and Earthmoving industry in Charleston, SCWe are a Heavy Civil Site Contractor with 30+ years of experience in the Utilities and Earthmoving industry in Charleston, SC

Job Description JOB TITLE: Controls Technician COMPANY: Hoffman Building Technologies STATUS: Full Time, Non-Exempt (Eligible for overtime) DEPARTMENT: Construction JOB PURPOSE: The Controls Technician will handle start up and commissioning of DDC SYSTEMS by following commissioning procedures and guidelines. Controls Technician Essential Duties and Responsibilities: • ORGANIZES COMMISSIONING OF DDC PROJECTS by accepting projects from project management; analyzing commissioning workload timelines; understanding project requirements, sequence of operation, programming and system type; conferring and collaborating with other members of engineering and programming team., • ENSURES PROPER SYSTEM OPERABILITY by assisting in an onsite performance verification (“Big Picture Checkout”) with the HBT engineer to verify the system is functioning as it was designed., • DIRECTS ELECTRICAL SUBCONTRACTORS by prioritizing areas of completion; answering questions to assure proper installation; enforcing proper installation methods verifying proper installation., • MAINTAINS PROJECT DOCUMENTATION by updating wiring diagrams and sequence changes; maintaining current DDC program and Displays; maintaining project commissioning sheets; collaborating with Project Managers and Programmers to assure that current documentation is accurately and promptly transmitted from the field., • COMPLETES COMMISSIONING OF DDC PROJECTS by organizing, prioritizing and scheduling start-up assignments; coordinating with programming for needed modifications and corrections for DDC and Displays; organizing turnover to Project Manager for project close-out; following up on work results., • COMMUNICATES PROJECT INFORMATION by updating Project Managers and Construction Coordinator as to construction progress; updating any project deadline information; advising as to any changes in schedule or change orders; logging daily work in a project manual or work diary., • ACHIEVES FINANCIAL OBJECTIVES by cooperating with Ops management team in reviewing monthly job labor cost reports as needed; initiating corrective actions as directed., • MAINTAINS INDUSTRY TECHNICAL KNOWLEDGE by attending approved educational workshops; reviewing industry publications; reviewing Dealer Intranets; maintaining knowledge on proper electrical and mechanical installation methods; reviewing product specifications and catalogs on project material., • CONTRIBUTES TO TEAM EFFORT by leading by example; initiating an open and positive attitude; preparing for and attending training meetings; assisting in the training of new employees; sharing technical information with associates; accomplishing related results as needed. EEO Employer/Vets/Disabled

Job DescriptionSalary: Feyen Zylstra is a team of hardworking doers and thinkers proud to use our brains and brawn to solve the complex problems associated with the design, installation, and maintenance of electrical and low voltage systems. We tend to work in industries like healthcare, industrial manufacturing, commercial, and data centers where our customer benefit most from our technical expertise and the experience we provide them. We exist to have a positive impact on the lives of people. This starts with our FZers and a commitment to providing safe and energizing work environments, opportunities to learn and grow, and great pay and benefits. It then moves to our customers and a passion for helping them solve their most challenging problems. When we are successful in meeting the needs of our employees and our customers, we have the opportunity to have a positive impact well beyond ourselves in each of the communities where we live and work. FZ is headquartered in Grand Rapids, Michigan and is focused on serving customers throughout Michigan, Tennessee, and the Carolinas. FZ is looking for an Electrical Estimator to support our Carolina locations and sit in the Charleston office. This role is responsible for preparing detailed quantity take-offs and project estimates. This role collaborates heavily with Field Operations, Purchasing, Leadership, and Project Managers to ensure accurate and complete estimates. What Were Looking for: • A Relationship Builder. Whether its with a customer, supplier, vendor, or coworker, you value the importance of relationships. You collaborate with others to resolve conflict. You treat others with respect. You appreciate differences. You communicate effectively., • An Information Seeker.Gathering information for accurate work is part of your workday. You are willing to do jobsite walk-throughs, call vendors, and attend review meetings to gather information to ensure accuracy of quotes., • Detail Oriented.You understand the importance of the details. Whether its material or labor cost fluctuations, analyzing a bid document to understand scope of work, ensuring a professional and error-free document goes to the customer, or review a vendor quote, you have an eye for detail and ensure a quality product is always coming from your desk. Additionally, you realize that a deadline is a detail and that deadlines must be met., • Process Oriented.You recognize that problems can be mitigated through proper use of processes, standards, and early risk assessment., • A Scorekeeper. You understand the importance of measuring progress and results, financial and otherwise. You document, you track project data, you keep dashboards up-to-date and you hold yourself accountable for your work. You communicate pertinent information to others. You connect strategies to outcome and results. Key Qualifications: • 5+ years of experience estimating electrical construction projects over $3 million., • Experience estimating large commercial and industrial projects., • Proficiency in estimating in Accubid., • Ability to prepare conceptual budgets based on minimal information and specifications., • Ability to travel regionally to project sites as needed. We offer generous benefits, competitive compensation, paid time off, training and development, the opportunity for growth, a safe work environment, and the chance to work with a winning team in a great company culture. Candidates are required to pass a pre-employment drug screen. FZ is an Equal Opportunity Employer and considers applicants without regard to race, color, religion, sex, national origin, or other protected classes.

Job Description Our client specializes in commercial construction across the Southeast and beyond. With over 70 years of experience, a $940M annual revenue, and $900M bonding capacity, we're recognized as a Best Workplace for our culture and people-first approach. Our expertise spans sectors such as adaptive reuse, corporate, education, government, healthcare, hospitality, industrial, public assembly, retail, and site/civil. We’re seeking an experienced Preconstruction Manager/Estimator to join our team. This role plays a critical role in driving project success before construction begins. This position is responsible for managing all aspects of the preconstruction process—from conceptual estimating and budgeting to subcontractor engagement and final GMP preparation. The ideal candidate has a strong background in estimating, excellent communication skills, and the ability to collaborate across teams to deliver accurate and competitive proposals. Responsibilities • Manage pre-construction activities from project pursuit through handoff to operations., • Prepare accurate cost estimates at all stages of design, including conceptual, schematic, and design development., • Analyze drawings, specifications, and related documents to define scope and pricing requirements., • Develop, maintain, and strengthen relationships with subcontractors, suppliers, and industry partners., • Solicit, review, and level subcontractor bids to ensure competitiveness and compliance., • Collaborate with project teams and design professionals to identify value engineering opportunities and cost-saving solutions., • Develop budgets, proposals, and GMP documents in alignment with client and company expectations., • Stay informed of market trends, subcontractor capacity, and cost drivers impacting project pricing., • Participate in client and business development presentations as required. Qualifications • Minimum of 5 years of experience in estimating and preconstruction, preferably in commercial, healthcare, industrial, or education construction., • Comprehensive knowledge of construction means, methods, materials, and building systems., • Proficiency with estimating software and Microsoft Office Suite; experience with Procore or other construction management platforms is a plus., • Excellent organizational, analytical, and communication skills., • Proven ability to manage multiple projects, deadlines, and priorities effectively., • Bachelor’s degree in Construction Management, Engineering, or a related field preferred. What We Offer • Competitive salary and performance-based incentives, • Comprehensive medical, dental, and vision insurance, • Matching 401(k) program, • Short- and long-term disability coverage, • Paid vacation and company holidays, • A supportive, team-oriented culture with opportunities for career growth, • Community involvement and company-sponsored events If you share these values and are interested in joining a team that treats clients like family and buildings like a human enterprise, we’d love to hear from you.

Job Description A well-established Mount Pleasant law firm seeks a qualified paralegal to join their busy office. QUALIFICATIONS: • 2+ year(s) of Paralegal experience in a SC law firm setting., • Experienced in ONE or MORE: Construction Litigation, Personal Injury, General Litigation., • Computer savvy and can type 50-55 WPM, • Well organized and ability to keep scheduled dates., • Quick learner with ability to multi-task., • Office professional personality and ability to work with little supervision., • Experience with CLIO is a plus but not required, • Proficient in Microsoft Office applications. Job Type: Full-time In Office Position

Job Description Ardurra is looking to hire an experienced Senior Water/Wastewater Treatment Engineer to join our team in our Charleston, SC office. Our innovative water and wastewater engineers collaborate closely with clients to plan, design, permit, and construct systems that address their needs comprehensively. This approach allows our clients to make smarter investments, resulting in lower life cycle costs and additional benefits. As a recognized leader in the Southeast and national water industry, our projects encompass treatment and infrastructure initiatives for municipal and institutional clients. Our work ranges from drinking water supply to water reuse and wastewater management. We have the capability to support projects of all sizes within a flexible and innovative team environment. Primary Function: This position is responsible for planning, designing, and managing multidisciplinary projects related to water and wastewater treatment for municipal and institutional clients in the region. The individual will serve as a subject matter expert on these projects, handling the technical design requirements necessary for treatment systems, and ensuring their efficiency, sustainability, and adherence to environmental regulations. The role involves applying advanced engineering techniques and analysis to develop effective solutions, as well as communicating effectively with stakeholders at all levels. Additionally, the position includes managing and providing technical leadership on wastewater treatment projects, which encompass process engineering, treatment facilities planning and design, and related infrastructure. The role will develop and assist with the preparation of statements of qualifications and proposals, interact with and be responsive to client’s needs. Primary Duties: • Provide technical leadership to design consultants to complete detailed and permitted construction plans, • Provide technical leadership for design and optimization of water and wastewater treatment processes, including physical, chemical, and biological treatment systems., • Lead the process design in feasibility studies and facility plans., • Lead the development of calculations, drawings, and specifications for complex wastewater treatment upgrades., • Support client service managers and business development efforts, serving as a technical subject matter expert at in-person and virtual meetings and project interviews. Participate in project pursuits and interviews, including developing treatment process innovations, technical approaches, and scope items., • Develop scope and budget for new project opportunities., • Provide guidance and mentorship to colleagues interested in water and wastewater treatment project work. Education and Experience Requirements: • Bachelor’s degree in Engineering required, • Professional Engineer preferred, • At least ten (10) years of experience Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-BC1

Job DescriptionBaker Roofing Company – Residential Sales Representative Transform Homeowners' Dreams into Reality with a Century-Old Industry Leader. Join the top tier of home exterior sales professionals with a company that's been perfecting the business for over 100 years. Baker Home Exteriors, a well-established company with multiple Southeast locations, is seeking a highly motivated Sales Representative to join our growing team. This is an exceptional opportunity to build a lucrative career while helping homeowners enhance their most valuable investment. Ready to Launch Your Career? If you're a motivated sales professional ready to join a winning team and build substantial wealth while helping homeowners, we want to hear from you! SummaryResidential Sales Representative is responsible for selling premium home exterior solutions including: • Roof Replacement, • Siding Replacement, • Windows and doors, • Gutters and drainageRequirementsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The lists below are representative of the knowledge, skill and/or ability required.Minimum Qualifications, • 3+ years of outside sales experience, • Proven track record of achieving sales goals, • Valid driver's license, • Experience in home improvement, construction, or related industries, • Comfortable with consultative selling approach, • Self-motivated with strong work ethic, • Professional appearance and demeanorKnowledge, Skills, and Abilities, • Experience with Microsoft Suite products, • Customer service experience, • Possess an outgoing and energetic personality and a high degree of self-confidence, • Excellent written and verbal communication skills, • Excellent communication and relationship-building skills, • High motivation and willingness to learn our systems, • Possess a motivated and professional attitude, • Demonstrate strong follow-up skillsEssential Functions, • Conduct in-home consultations with homeowners during pre-scheduled appointments (Monday-Friday), • Assess customer needs and educate them on available solutions, • Provide professional estimates and close sales, • Deliver exceptional customer service throughout the sales process, • Attend monthly sales meetings and ongoing training sessions, • Maintain strong follow-up practices to maximize conversion ratesPhysical Demands, • $50,000 annual base salary, • Enhanced guarantee program for first 6 months, • Quarterly commission structure, • Total Annual Earning Potential: $130,000 - $300,000+Outstanding Benefits:, • Company truck and gas allowance provided, • Phone and laptop included, • Comprehensive health benefits, • 401(k) with company matching, • Employee Stock Ownership Plan (ESOP) earn shares annually after one year of employment EOE Minorities/Females/Disability/Veterans; VEVRAA Federal Contractor spngjazR7g

Job DescriptionSUMMARY HR Consulting Solutions LLC is an international executive search firm retained by a fast-growing, highly respected engineering firm located in the Carolinas to recruit a Project Engineer for their Charleston, SC office. With a strong reputation in civil and environmental engineering, our client recently celebrated 20 years of success and was recognized as one of America’s fastest-growing private companies by Inc. Magazine. PRIMARY WORK LOCATION • Our client is licensed in South Carolina, North Carolina, Georgia, Virginia, Kentucky, Tennessee, and Ohio. The firm provides a wide array of civil engineering and environmental engineering services with offices located in Columbia, SC, Charleston, SC, Greenville, SC, Bluffton, SC, and Charlotte, NC., • Lead and contribute to site design for commercial, residential, and industrial developments, including industrial park design, storm drainage system design, water and wastewater systems design, roadway design, landfill design, and water and wastewater studies., • Coordinate permitting processes with various regulatory agencies., • Manage project phases, including bidding, contract award, and construction administration., • Oversee construction observation to ensure compliance with project specifications, • Bachelor’s degree in Civil Engineering or a related field., • Registered Professional Engineer (PE) or ability to obtain PE certification within 6 months., • 4+ years of experience in civil engineering, preferably with a civil consulting firm., • Strong knowledge of design, permitting, and construction processes., • Proficiency in AutoCAD, Microsoft Word, and Excel., • Experience with Civil 3D and Land Development software is a plus., • Excellent communication and organizational skills to work effectively with clients and project teams., • Competitive Compensation: Industry-leading salary with performance-based profit sharing., • Comprehensive Benefits: Medical, dental, and vision insurance., • Work-Life Balance: Generous PTO, including vacation, sick time, and paid holidays., • Growth & Stability: Join a firm with 20+ years of success and a strong industry reputation., • Diverse Projects: Work on impactful civil engineering projects across multiple sectors. Powered by JazzHR F1qjRhAzuH

Job Description ESP is looking for motivated individuals with a strong desire to learn and a demonstrated ability to work in a team environment to join our team in North Charleston, SC. The position includes design in land development and construction document preparation for roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control associated with residential, commercial, and institutional projects. This is a great opportunity to start and grow your career in land development with a well-established and dynamic Engineering, Surveying and Planning firm! Responsibilities: • As a team member, you will be involved with civil site/land development design, permitting, and construction observation on a variety of residential, commercial, and institutional projects., • Develop strong relationships with team members., • Perform design of land development projects within Autodesk AutoCAD Civil 3D software., • Perform and prepare technical design calculations associated with land development projects (i.e., storm drainage hydraulic sizing, water distribution modeling, best management practices (BMP), sanitary sewer collection systems, erosion control measures, etc.)., • Perform preliminary engineering evaluations, including quantity take-offs and opinions of probable construction cost., • Perform site visits and prepare associated field reports., • Bachelor’s Degree in Engineering (BSCE) or related engineering degree, • Excellent written and verbal communication skills., • Individual should have a strong desire to continue learning, advance professionally, and demonstrate ability to work in a fast-paced, design team environment., • EI/EIT certification, • Previous experience with AutoCAD and/or Civil3D, • Previous internship(s) with civil engineering/land development firms Corporate Information: ESP is a multi-discipline engineering design and consulting firm providing our clients with civil engineering, surveying, planning/landscape architecture, geosciences, environmental, subsurface utility engineering, and construction engineering inspection. Through years of dedicated service to our clients, ESP has received a designation of 195 on the 2025 ENR Top 500 Design Firm rankings. For the firm's primary territory, the ENR Texas & Southeast Top Design Firms, ESP received a 2025 ranking of 52. ESP offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job DescriptionDescription: Hiring for the Charleston, SC area Position Summary Install, service, maintain, repair & alter cabling to include: twisted pair, coax, low voltage, CAT6, single & multi-mode fiber optic, communications, and/or other various low-voltage cable systems. Position Responsibilities • Physical installation & removal of cabling components, cabinets, pathway systems/cable tray, move equipment, racks, and related communications infrastructure materials., • Ensure quality and safety guidelines are being followed, • Evaluate, diagnose, troubleshoot cabling infrastructure systems and perform repairs as necessary., • Travel to client sites as needed to complete assigned work and transport a variety of items (e.g. tools, equipment, supplies, etc), • 1+ years of experience, • General construction knowledge, • Ability to read & interpret blueprints and construction drawings & specifications, • Previous experience in Structured cabling installation, • Able to terminate and splice fiber optics, • Able to install and terminate CAT 6/CAT 6A, • Knowledge of through-wall penetration systems, • Knowledge of industry standards including BICSI, ANSI, EIA/TIA, and local and NEC, • Knowledge of publications pertaining to standard cabling for telecom, data, security & wireless systems practices, engineering & Federal, State & local safety standards, • BICSI Training/Certifications are a plus, • Proven ability to install, terminate & test low voltage cables to include twisted pair cable, coax, power limited tray cable, stranded & solid conductor low voltage cable and fiber optic cable.., • Able to work off a lift, • Ability to install cable pathways, conveyances (e.g. ladder, trays, support systems), • Ability to carry up to 30 lbs. and lift up to 50 lbs, • Ability to climb ladders and work from heights, • Able to work flexible schedule, • Able to pass a full background & drug screening, • Dependable and reliable!, • Good communication, organizational & time management skills, • Teamwork orientation, with mentoring skills and a willingness to help others, • The ability to work well with all team members ABOUT NETWORK CONTROLS At Network Controls, we provide high-quality single-source design, installation, and maintenance of communication networks and technology infrastructure. Team members specialize in niche industries, including office and industrial, educational facilities, healthcare, manufacturing, and the public sector (including military and quasi-government facilities). With project teams in Greenville, South Carolina, Columbia, South Carolina, Charleston, SC and Charlotte, North Carolina, we serve companies and organizations throughout the Southeast. Our customers choose us because of our track record. We get the job done right, on time, with no hassle. Our team members are highly certified, with the experience to design and install robust networks and systems for each industry we serve. What We Offer In addition to competitive pay, stable employment, and growth opportunities, we offer a variety of benefits as part of our total compensation & rewards package. • Weekly Pay, • 4-day work schedule for our field team members - with Overtime available, as applicable/based on position & project schedules, • PTO (Paid Time Off), • Paid Holidays, • Additional Pay for Shift Work, as applicable, • Training & Certification Opportunities, • Cross-Training Opportunities, • Employee Appreciation Events, • Company Swag - Apparel, hats & a variety of other items available, • Medical, dental, vision, disability, and voluntary life options. Eligible the first of month following date of hire., • 401k Match upon eligibility with 100% immediate vestingRequirements:

Job Description Jennings Air and Mechanical has immediate openings for a Sheet Metal Mechanic in Charleston, SC. SUMMARY: Sheet Metal Mechanic will work as part of the Jennings Air & Mechanical construction team, installing sheet metal ductwork on various heating and cooling systems. Some of the main duties are as follows: Duties and Responsibilities • Analyze blueprints to determine the fabrication, assembly, and installation of sheet metal goods., • Install various types of ductwork, such as TDF, TDC, Slip and Drive, Spiral, and Snap-lock., • Perform field modifications, cuts, miters, transitions, plenums, and repairs as needed., • Optimize HVAC system installation for maximum efficiency., • Proficient in reading and interpreting blueprints, sketches, and product specifications, • Skilled in the removal and installation of HVAC duct systems., • Follow directions accurately., • Must have a clean background check., • Preferably OSHA 10, • Competitive salary based on experience., • Health, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off and holidays., • Ongoing training and development opportunities., • Company vehicle and tools provided. We are an equal opportunity employer and we consider all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status. Powered by JazzHR Q5nEiVsRfy