Data analysis jobs in San Antonio, Texas - Page 4Crear alertas

Job Description POSITION OVERVIEW: The Regional Pharmacist plays a vital role in maintaining uninterrupted pharmacy services across a multi-state network of long-term care and behavioral health pharmacies. This position provides on-site pharmacist coverage during both scheduled and unscheduled absences (e.g., PTO, sick leave, leaves of absence) to ensure continuity of operations, regulatory compliance, and patient safety. When not actively staffing a pharmacy, the Regional Pharmacist works under the direction of the Regional Director of Pharmacy to support operational initiatives, staff development, training, and process improvement projects that enhance performance and service quality across sites. This is a highly adaptable and travel-intensive role requiring strong clinical knowledge, leadership presence, and the ability to quickly integrate into different pharmacy environments, workflows, and regulatory frameworks. To excel in this position, a Regional Pharmacist must demonstrate the ability to: • Respond rapidly and flexibly to site needs with short notice, managing shifting priorities and dynamic schedules., • Represent pharmacy leadership on-site during coverage, reinforcing operational consistency, safety standards, and company values., • Identify and address workflow inconsistencies, contributing to the development and standardization of best practices across pharmacies., • Communicate clearly and proactively with the Regional Pharmacy Director, staff, and corporate leadership during site assignments and after transitions. KEY RESPONSIBILITIES: Staffing Coverage & Operational Continuity (40%) • Provide on-site pharmacist coverage across multiple pharmacy locations in the region to support continuity of operations during scheduled and unscheduled absences., • Perform standard pharmacist duties including:, • Clinical review and verification of medication orders for accuracy, appropriateness, and safety., • Oversight of safe and accurate medication preparation, dispensing, and documentation processes., • Collaboration with prescribers, nurses, and care coordinators to address medication related concerns and ensure timely therapy access., • Supervision of pharmacy technician workflows to ensure adherence to operational procedures and regulatory standards., • Monitoring controlled substance documentation and performing regular checks to ensure compliance with DEA and state Board of Pharmacy requirements. Support to Director & Regional Operations (60%) • When not actively staffing a pharmacy, the Regional Pharmacist will: • Assist in the onboarding and training of new pharmacists and technicians, helping to standardize competencies and support a consistent standard of care across sites., • Participate in workflow analysis and improvement initiatives, including policy implementation, system optimization, and pharmacy efficiency efforts., • Serve as a resource for pharmacy teams, offering support with day-to-day operational questions and escalating issues to leadership when necessary., • Collect and review operational data, identify performance trends, and contribute to action plans that improve site outcomes and efficiency., • Assist with special projects as directed by the Regional Director of Pharmacy. QUALIFICATIONS: Education & Licensure • Graduation from a School of Pharmacy accredited by the American Council on Pharmaceutical Education (ACPE) or certified by the Foreign Pharmacy Graduate Equivalency Committee (FPGEC); Baccalaureate or PharmD degree required., • Active and unrestricted pharmacist license in at least one applicable state; must be willing and able to obtain additional licensure in other applicable states within six (6) months of employment., • Immunization certification and Basic Life Support (BLS) training preferred. Experience • Minimum three (3) years of pharmacist experience, with at least one (1) year of experience in a leadership, supervisory, or support role preferred., • Familiarity with closed-door pharmacy operations and cycle fill workflows. Skills & Competencies • Excellent communication and interpersonal skills, with the ability to lead, coach, and collaborate across multi-disciplinary teams., • Highly organized and detail-oriented with the ability to work independently in fast-paced or unfamiliar settings., • Proficiency with Microsoft Office 365 (Word, Excel, Outlook, Teams)., • Experience with RX30 and electronic health record (EHR) systems (AccuFlo, QuickMAR, or similar platforms). WORK ENVIRONMENT & TRAVEL REQUIREMENTS: • This position requires frequent travel to pharmacies across multiple states; overnight travel and flexible scheduling are expected based on operational needs., • Must be comfortable working in varied pharmacy environments, including adapting to different staffing models and patient populations., • Must be able to lift, carry, or move up to 20 pounds and stand for extended periods during shifts.

Job Description Job Title: Data Analytics Specialist This position is an on-site assignment based in San Antonio. Summary: The Data Analytics Specialist leverages foundational data analytics skills to extract meaningful insights from diverse datasets and provide actionable recommendations that support informed decision-making. This position contributes to organizational success through data-driven analysis, collaboration, and continuous learning. Wage Type: Salaried Essential Duties & Responsibilities: To perform this job successfully, an individual must be able to perform each of the essential duties satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Data Analysis and Interpretation: Apply advanced analytics techniques to examine complex datasets across various domains. This includes tasks such as performance analysis, process optimization, forecasting, trend identification, and risk evaluation. Interpret results to uncover patterns, anomalies, and actionable insights, and communicate findings clearly to stakeholders through visualizations, reports, and presentations., • Reporting and Visualization: Develop and maintain standardized reports, dashboards, and visualizations using tools such as Excel, SQL, Tableau, or similar platforms. Present results in an easily understandable format to facilitate effective decision-making processes by senior management and finance professionals., • Process Improvement: Identify opportunities to streamline organizational processes, optimize data collection and analysis methodologies, and automate reporting tasks. Proactively suggest and implement innovative solutions to enhance efficiency and effectiveness within the data analytics function., • Cross-functional Collaboration: Collaborate with stakeholders across different departments, including finance professionals, risk managers, and senior management, to understand their data needs and provide analytical support. Collaborate on strategic initiatives, leveraging data insights to contribute to the achievement of departmental and organizational goals., • Carries out responsibilities in a manner consistent with our values and operating principles, in accordance with policy and applicable laws, and with a commitment to continuous improvement and process excellence. Reports to: Manager, Data Analytics Supervises: None Qualifications: Education: • Proficiency in data analysis tools such as Excel, SQL, Python, R, or similar platforms., • Solid understanding of statistical modeling concepts and experience in financial forecasting and scenario analysis., • Strong communication and presentation skills, with the ability to convey complex financial information to both technical and non-technical stakeholders., • Detail-oriented mindset with a commitment to data accuracy and integrity., • Ability to work independently and collaboratively in a fast-paced environment, managing multiple priorities and meeting deadlines., • Knowledge of data governance principles, data management best practices, and regulatory compliance related to data analytics is advantageous., • Strong positivity., • Mission driven, competitive, goal-oriented, and motivated to develop themselves and others., • Energetic, resourceful, and appropriate work intensity to get the work done, • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

Job DescriptionDescription: About Us: At Tomball Controls, we specialize in manufacturing custom fuel tanks, custom sound attenuated enclosures, and access platforms for emergency power generators. We are proud to serve clients across various industries, providing them with high-quality power packaging solutions to meet their specific requirements. With years of experience among our team members and a commitment to excellence, we have built a reputation for delivering reliable, durable products on time and within budget. Job Description: The NPI Engineer leads the industrialization and launch of new metal-mechanical products, with emphasis on datacenter enclosures and assemblies. Acting as the technical link between Design Engineering, Manufacturing, Supply Chain, Quality, and Program Management, this role ensures products are manufacturable, cost-effective, compliant, and delivered on schedule. Key Responsibilities: • Lead New Product Introduction (NPI) activities from concept freeze through pilot, ramp-up, and full-scale production., • Define and execute NPI phase-gate deliverables, including Design for Manufacturability/Assembly (DFM/DFA), process readiness, costs targets, and risk assessments., • Review enclosure designs- such as sheet metal components, frames, doors, panels, and weldments- for manufacturability, assembly efficiency, and serviceability., • Drive design improvements to optimize fabrication processes, including laser cutting, punching, bending, welding, machining and fastening., • Validate manufacturing processes through first article inspections (FAI), capability studies, and pilot build data analysis., • Serve as the primary NPI manufacturing liaison with Design Engineering, Quality, Supply Chain, Program Management, and Operations teams., • Support program schedules and ensure manufacturing readiness aligns with customer delivery commitments., • Execute formal handoff of products and processes to Manufacturing and Operations teams., • Capture lessons learned during NPI and standardize best practices for future programs. Requirements: Required Qualifications: • Bachelor’s degree in Mechanical, Manufacturing or Industrial Engineering, or (equivalent)., • 5+ years of experience in New Product Introduction (NPI), Manufacturing Engineering, or Process Engineering within a metal-mechanical environment., • Demonstrated ability to manage projects or workstreams within a structured NPI or product development framework., • Hands-on experience with datacenter infrastructure products, including enclosures and electrical or mechanical housings., • Proficiency with CAD tools (SolidWorks/PDM/AutoCAD)., • Familiarity with ERP/MRP systems (Epicor, SAP, Oracle, etc.) and PLM tools., • Lean manufacturing and problem-solving certifications (Lean, Six Sigma, Kaizen) Preferred Qualifications: • Excellent communication skills with the ability to collaborate effectively across engineering production, and leadership teams., • Formal project management training or certification (PMP, CAPM, or equivalent) is a strong plus., • Ability to drive change and lead cross-functional teams., • Organized, detail-oriented, and committed to safety. Physical Requirements: • Ability to stand and walk for extended periods throughout production facilities., • Must be able to lift 25 pounds as needed., • Frequent exposure to outdoor elements. Equal Opportunity Employer/Minorities/Women/Veterans/Disabled Tomball Controls is an Equal Opportunity and Affirmative Action Employer. Tomball Controls is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job Description Job Summary Reporting to the Engineering Project Manager, the Civil Engineer will perform civil engineering work for both the private and public sectors. In this role, work includes site development, commercial development plans, subdivisions, and roadways utilizing Civil 3D and other applicable software programs. Additionally, the Civil Engineer will exhibit exceptional professional and communication skills in a collaborative environment. The Civil Engineer, with the guidance of the Engineering Project Manager, works to meet the needs of clients by providing excellent technical input and customer service. Essential Duties and Responsibilities Prepares engineering plans, design calculations, specifications, bid documents and cost estimates Conducts engineering design under the supervision of an experienced engineer Creates designs, calculations, sketches, diagrams, schematic drawings, andfinal working drawings under the supervision of an experienced engineer Collects and analyzes data under the supervision of an experienced engineer Uses computer software as a tool for solving basic engineering problems Performs work in accordance with agreed-upon budget and schedule undersupervision Completes tasks efficiently by utilizing time to complete tasks accurately, ontime, and within budget Visits sites regularly and attends meetings with clients/contractors as needed Communicates with project team members, client representatives, and others as appropriate to the project This position is located in person in Midland TX. Not a remote position. Requirements Required Skills and Abilities Civil design experience in roadway, grading, drainage, utility, and site development projects Knowledge of local and state design standards and procedures Knowledge of engineering and data analysis techniques and theories Capable of working independently or within a design team Ability to professionally communicate with the project team, government agencies, and clients Has a positive attitude and strong oral and written communication skills Capable of handling multiple responsibilities concurrently Excellent organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Proficient with Microsoft Office 365, with the ability to learn updated software Working knowledge of AutoCAD, Civil 3D, and similar engineering software Must meet confidentiality expectations as to confidential, proprietary, and sensitive Company information Has a high level of customer service delivery Education and Experience • Bachelor’s degree in Civil Engineering required, • Minimum two (2) years of experience in the design of civil engineering projects, • Must have an Engineer In Training (E.I.T.) certificate or ability to obtain within one (1) year of being hired, • Must obtain a Professional Engineer (P.E.) license in Texas or New Mexico within two (2) years of being hired Physical Requirements • Prolonged periods sitting at a desk and working on a computer, • Must be able to lift up to thirty (30) pounds at times Health Insurance (HDHP), Vision and Dental 401K Retirement Plan Long Term/Short Term Disability Insurance Other benefits

Job Description The Assistant Director of Upward Bound Programs is a full-time, 12 month, grant funded position that provides a leadership role focused on academic enrichment and achievement, student success, motivation, retention, high school graduation, postsecondary enrollment, and postsecondary completion. This position is funded in whole or in part, by an external grant and is subject to immediate termination if the grant funding ceases. No employee who is in such a position may file a grievance over the termination of the position. While it is possible that grant funding may be renewed, the current funding for this position ends on May 31, 2027. DUTIES AND RESPONSIBILITIES: • Supports all aspects of the successful planning, implementation, and evaluation of the goals and objectives of the St. Mary's University Upward Bound programs, • Ensures compliance and the timely documentation of all employee and student activities sponsored by Upward Bound programs with regard to federal and University policies, • Implements programs designed to recruit participants and prepare them for high school graduation, college applications and admission, and successful completion of a college degree., • Evaluates student programs and services to meet the goals of Upward Bound, • Implements activities designed to strengthen the support of participants' families related to the goals of Upward Bound, • Ensures eligibility requirements are met and appropriately documented for enrolled participants and the successful achievement of goals for individual student education plans, • Maintains effective and positive working relationship with the target high schools to ensure that the educational needs of participants are met, • Plans, implements, and supervises field trips and experiential learning opportunities for students, • Assists with the coordination of senior year pre-college programming, including the completion and timely submission of college applications for admission, financial aid, and housing, • Plans and manages the collection, compilation, and analysis of data for reporting and documentation, • Plans and manages annual follow-up of former participants including but not limited to the development and oversight of an alumni tracking system with respect to educational attainment, • Assists with supervision, training, and development of full-time, part-time, and student employees., • Performs other duties as assigned. QUALIFICATIONS: • Master's degree in Educational Administration from an accredited college or university required; a Bachelor's degree in Secondary Education with a Texas Teaching Certificate highly desirable., • Three (3) or more years of professional experience as an educational administrator, coordinator, or teacher in a public school or school district., • Experience serving underrepresented student populations including youth from low socio-economic backgrounds and who are potential first-generation college students is highly desirable, • Experience in recruitment of high school youth for participation in an academic program, • Experience with virtual training, coaching, or instruction preferred., • Must clear and maintain a favorable background investigation and clearance., • Must have valid driver's license, motor vehicle liability insurance, and personal injury insurance, or have a self-reliant source of transportation to conduct business on a daily basis, • Must have the ability to demonstrate intermediate to high skills in MS Office (Word, Excel, Access, Publisher, Outlook, Teams, and Zoom or similar platforms); familiarity with financial systems (Banner), a plus, • Must be able to work flexible hours, including evenings, and weekends., • Must be able to conduct home visits and to travel to assist with the supervision of participants on field trips., • Bilingual Preferred (English/Spanish with the ability to understand and to make one's self understood to Spanish speaking individuals), • Demonstrated successful experience working with youth from low-income and culturally diverse backgrounds., • Demonstrated ability to motivate and inspire students to achieve their highest potential; experience serving potential first-generation college students from low-income backgrounds preferred; Strong knowledge of the Upward Bound program and the population it serves; alumni of the program are preferred, • Knowledge of best practices in high school curriculum including but not limited to STEM education;, • Must have excellent verbal and written communication skills; strong public relations and customer service skills with an ability to implement diplomacy and discretion at all times; ability to work effectively with high school students, parents, school counselors, teachers, faculty and staff., • Must have high ethical standards and a strong sense of confidentiality; ability to prioritize and manage multiple deadlines; thrive in a complex work environment; display solid problem solving and interpersonal skills; work well independently and as part of a team; professional demeanor, appearance and strong work ethic required, • Must have a high attention to detail and be able to organize workflow, coordinate activities, balance simultaneous projects without loss of efficiency in a multi-tasked environment, and manage multiple priorities to meet deadlines. PHYSICAL DEMANDS: • Working conditions are in an office environment and university campus setting. Must be able to move across the university campus to conduct day to day business., • While performing this role, the employee will be regularly required to sit, walk, and stand; talk and hear, both in person and by telephone; and use hands repetitively to operate standard office equipment; and occasionally required to lift up to 25 pounds., • Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus., • Frequently communicates with others using approved technological resources; must be able to exchange accurate information through designated systems within a timely manner., • Constantly operates a computer and other office productivity machinery. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. St. Mary's University is a Hispanic-Serving Institution and an Equal Opportunity Employer. Job Posted by ApplicantPro

Job Description We call it being a life changer, but you’ll call it a job you love while helping others find the same. You’ll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. As the Education Finance Specialist / Financial Aid Officer, you will work within federal, state and institutional policies and regulations, to provide financial aid information and counseling services to students and families. Responsibilities • Counsel and advise students about financial aid eligibility, application procedures, aid programs, packaging policies, costs, billing process, indebtedness, money management and financial planning., • Determine the amount of aid, considering such factors as funds available, extent of demand, and needs of students., • Compare data on students' applications, such as proposed budget, family income, or transcript of grades, with eligibility requirements of assistance program., • Interview students to obtain information needed to determine eligibility for aid., • Review FAFSA process with student – maintain copies of applicable federal tax returns required to complete this process; enter FAFSA data to complete needs analysis/budget worksheet., • Ensure 100% student satisfaction; provide timely service during student appointments., • Challenge and expand your knowledge., • Develop your skills in an entrepreneurial environment where you have influence., • Work alongside an exceptional leadership team, passionate about educating future developers., • You are passionate about education and commit to a “students first” philosophy., • You embrace change and you are always excited to learn something new., • You believe that goals are set to be exceeded.Requirements, • Education/Experience: You have a Bachelor's degree (B.A.) from a four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience., • Skills: You can make mathematical calculations and reconcile records as required. You have excellent analytical, problem solving and customer service skills., • Technical: You have a working knowledge of MS Outlook, Word and Excel.Benefits, • Training & Development, • Fun & Energetic, Family-Based Environment, • Continuous Growth Opportunities, • Medical, Dental, & Vision Options, • Health Savings & Flexible Spending Options (HSA & FSA), • Basic Life & Accident Insurance, • Short & Long-term Disability, • 401K Retirement Plan, • SCI is an Equal Opportunity employer About Southern Careers Institute SCI has been changing lives for over 60 years, now and we’re just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Job Description Sourcing Specialist Job Description: We are seeking a highly motivated, experienced, detail-oriented, strategic-thinking individual to join our Procurement team as a Sourcing Specialist. In this role, you will be responsible for managing the sourcing commodity purchases and procurement activities related to sourcing commodities, other raw and packaging materials for our bakery operations. Key Responsibilities: -Researching, identifying, monitoring and evaluating suppliers for various commodities such as flour, sugar, butter, eggs, fats, etc. -Monitoring market trends and commodity prices to make informed purchasing decisions. -Negotiating contracts and pricing terms with suppliers to ensure cost-effectiveness and quality standards are met. -Align sourcing activities and operations requirements by working closely with the sales and operating team to forecast ingredient needs to ensure appropriate contract terms and quantities for the business channel. -Collaborating with vendors to resolve any supply chain issues when applicable. -Developing and maintaining strong relationships with suppliers to ensure consistent and reliable delivery of materials. -Analyzing and optimizing commodities contract processes to improve efficiency and reduce costs. -Keeping detailed records of contracts, contracted volume levels and vendor performance for reporting purposes. • Develop and implement sourcing strategies to ensure cost-effective procurement of quality ingredients, materials, and services which meet customer (internal and external) expectations., • Identify and evaluate potential suppliers, negotiate contracts, and establish relationships to optimize pricing and terms for new projects, request for pricing, solicitations, etc., • Execute on our supplier performance evaluations with a cross functional team from all our key departments., • Collaborate with internal stakeholders, including production, quality assurance, and logistics teams, to perform our supplier performance evaluation in a timely manner., • Maintain accurate records of procurement activities, supplier contracts, pricing agreements, and related documentation., • Stay current trends in industry, regulations, and best practices in sourcing and procurement., • Other duties as assigned Qualifications: • Bachelor's degree in business, Supply Chain Management, related field or equivalent work experience., • Minimum of four years of relevant experience in strategic sourcing, preferably in the food industry or industrial food manufacturing. -Minimum four years' experience using Excel, Word and Enterprise Resource Planning Software Requirements: • Knowledge of market trends and pricing dynamics for food commodities., • Strong negotiation skills and ability to build effective relationships with suppliers., • Solid attention to detail and organizational skills. -Excellent analytical and problem-solving abilities. • Proven track record of successfully managing supplier relationships, negotiating contracts, and driving cost savings initiatives., • Strong analytical skills, attention to detail, and proficiency in data analysis tools., • Excellent communication, negotiation, and organizational skills., • Ability to work independently, prioritize tasks, and thrive in a fast-paced, dynamic environment.

Job Description We are looking for an experienced HRIS Analyst to join our team in San Antonio, Texas. The ideal candidate will possess strong analytical skills and a solid background in HR systems, enabling them to optimize processes and deliver impactful insights. This role is perfect for someone who thrives on turning data into actionable strategies and enjoys collaborating with cross-functional teams. Responsibilities: • Analyze HRIS data to identify trends, generate reports, and support strategic decision-making., • Collaborate with HR teams to optimize the use and functionality of HR systems., • Develop and maintain dashboards and visualizations using Power BI to enhance reporting capabilities., • Support the implementation and integration of HRIS platforms and tools., • Ensure the integrity and accuracy of HRIS databases by conducting regular audits and updates., • Provide training and guidance to HR staff on system usage and best practices., • Partner with stakeholders to gather requirements and deliver tailored solutions., • Troubleshoot and resolve technical issues related to HR systems., • Stay updated on emerging HR technologies and recommend improvements., • Document workflows and processes to ensure consistency and compliance, • Minimum of 5 years of experience in HR analysis or a similar role., • Proficiency in Power BI for creating reports and dashboards., • Strong understanding of HRIS platforms and their functionalities., • Experience with HRIS implementation and database management., • Ability to analyze complex data sets and present actionable insights., • Excellent problem-solving skills and attention to detail., • Effective communication skills for working with diverse teams., • Familiarity with emerging HR technologies and trends.

Job Description About Us: Join our family-based practice where we value the science of Applied Behavior Analysis (ABA) and provide a supportive, collaborative environment. Our team includes experienced Board Certified Behavior Analysts (BCBAs) dedicated to maintaining a healthy work/life balance and encouraging professional growth. Our Values and Mission: • Values: Humility, Growth Mindset, Collaborative, Kind, • Mission: To provide the best therapy, blending humanity and science to meet our kids where they are. Why Join Us? • Collaborative Team: Work with a team of experienced BCBAs., • Small Caseloads: Manage BACB-recommended small caseloads., • Work/Life Balance: We prioritize your well-being and encourage a healthy work/life balance., • Supportive Environment: Have a voice in a team that truly supports you., • Experienced Leadership: BCBA owned and operated. Clinical Director and Senior BCBAs have over 10 years of experience each and still actively see clients. What We Offer: • Progressive ABA Practices: Utilize trauma-informed approaches and alternatives to escape extinction. We work on finding the balance between science and art., • Child-Led Therapy: Engage in play-based therapy focusing on child-led interventions., • Manageable Caseload: Handle a small caseload of 5-10 clients., • Balanced Workload: Average of 26 billable hours per week., • Team Collaboration: Collaborate with Registered Behavior Technicians (RBTs) and Occupational Therapists (OT)., • Work with Real People: You are not another face in the crowd; you are part of a small team that works together to learn and grow together. What are our expectations: • Timely Documentation: Write and submit insurance reports promptly and professionally., • Supportive Management: Work under supportive Program Managers and Clinical Directors., • Diverse Assessments: Familiarity with assessments such as VB-MAPP, ABLLS, PDDBI, Vineland, and PEAK., • Individualized Plans: Develop data-driven Behavior Intervention Plans tailored to each client., • Parent Training: Provide parent training based on family needs, whether in-clinic, in-home or in the community., • Direct Therapy: Offer direct therapy to clients as needed. Benefits: • Competitive Compensation: Attractive salary package., • Insurance Coverage: Medical, Vision, and Dental insurance packages are available.- Bonuses: Productivity bonuses., • SafetyCare Training: Comprehensive safety training provided., • Professional Coverage: Professional liability and state licensing are covered., • Technology: Assigned iPad for professional use, Motivity Data Collection, Google Workspace, How to Apply: We'd love to hear from you if you are a passionate clinician looking to make a difference and grow with a supportive and dynamic team. Apply now to become the newest member of our team! Through Job Post

Job DescriptionCompany Description About KIPP Texas Public Schools KIPP Texas Public Schools is a network of 54 public charter, open-enrollment, pre-k-12 schools educating nearly 32,000 students across Austin, Dallas, Houston, and San Antonio. Together with families and communities, our mission is to create joyful, academically excellent schools that prepare students with the skills and confidence to pursue the paths they choose - college, career, and beyond - so they can lead fulfilling lives and build a more fair world. Founded in Houston in 1994 and operating as KIPP Texas since 2018, we are looking to hire a diverse team of dynamic, collaborative, and dedicated individuals with an unyielding belief that every child will succeed. Join a Team and Family with an unwavering commitment to creating classrooms, offices, and communities rooted in belongingness, academic success and joy. If you are passionate about joining a mission and values-driven community who wants every child to want to run to school, the KIPP Texas Team and Family is for you! KIPP Public Schools is a national network of public charter schools that prepares students with the skills and confidence to create the future they want for themselves, their communities, and us all. We are a network of 278 schools with nearly 16,500 educators and 190,000 students and alumni. Job Description The Special Populations Specialist serves as a critical support to special populations faculty and school leaders, providing guidance in the areas of compliance, curriculum, and instruction. This role collaborates closely with instructional staff, regional curriculum teams, and school-based personnel to ensure the delivery of high-quality, individualized educational programs for students with diverse learning needs. By supporting effective teaching practices, ensuring adherence to legal and instructional standards, and ensuring compliance with IDEA and Texas State Education Law & Regulations, Section 504 Law & Regulations, the Special Populations Specialist helps advance the mission of KIPP Texas Public Schools—ensuring that every student has the tools and supportive environment necessary to thrive. The Special Populations Specialist is responsible for delivering ongoing, campus-based instructional modeling and compliance training for teachers and instructional assistants who implement Individualized Education Programs (IEPs) for students receiving special education services and 504. This role supports the development of high-quality, inclusive instruction and ensures fidelity to both instructional best practices and legal requirements. In partnership with Senior Directors of Special Populations, the Specialist provides direct support to campuses and collaborates with regional teams to promote consistency and quality across the network. Serving as a mentor and key point of contact, the Specialist builds teacher capacity and fosters a strong culture of collaboration, equity, and accountability in service of students with diverse learning needs. General Role Description * Strategy: Support the strategic vision to ensure that KTX school and regional teams implement the Special Education Strategic Plan and provide comprehensive improvement of school performance using a collaborative approach to clear and specific performance targets aligned to the Special Education Strategic Plan and execute, monitor, edit strategic plans, annual goals and quarterly benchmarking for departmental improvement. * Communication: Assists the Senior Director of special populations in ensuring KTX special populations teams are provided excellent communication, customer service and well-coordinated support. * Legal Framework & Compliance: Possess experience and knowledge of IDEA and Texas State Education Law & Regulations, Section 504 Law & Regulations and understanding of the essential elements of high performing MTSS systems and structures.. Duties and Responsibilities 1. Coaching and Support: * Provide coaching to school-based special education managers and other staff that support special populations students across all grade bands, including self-contained classrooms on MTSS, 504, and Special Education. * Provide support for special population compliance across the organization. * Identify schools and teachers in need of more hands-on support and offer planning time and office hours for targeted assistance. * Distill KTX instructional priorities into actionable steps for school-based staff and teachers to drive the work forward. * Deliver and record model lessons to demonstrate effective instructional strategies and provide feedback. 2. Data Analysis and Improvement: * Analyze school data including MTSS, 504, and ARD compliance to inform school based support and assistance. * Analyze student data, including iready, IA, STAAR, and STEP assessments etc, to inform instructional decisions and interventions. * Recognize patterns in student performance data and make recommendations for professional development and instructional improvements. * Use data to identify and support the academic needs of special populations students. * Monitor ARD paperwork completed by campus personnel, including supplements with accompanying data collected by campus staff (i.e., all IEPs, BIPs, Transition, Transportation etc.) 3. Stakeholder Engagement: * Cultivate the trust of all key stakeholders, including teachers, parents, and administrators, to support student success. * Maintain productive working relationships with other internal departments and lead troubleshooting efforts when issues arise with special populations. * Serve as the Special Populations team Liaison, ensuring effective communication and collaboration between teams. 4. Professional Development: * Co-facilitate professional development sessions focused on instructional strategies, compliance and best practices for special populations. * Support/provide monthly PD, newsletter input, communication, to provide ongoing coaching and guidance to the school-based staff. * Develop and deliver training on organization structures, processes, and procedures necessary to support effective MTSS systems. * Collaborate with the Senior Director and school staff to resolve TEA complaints. 5. Compliance and Documentation: * Ensure that IEPs, other special education documentation, and 504 plans are compliant with federal, state, and district regulations. * Participate in IEP meetings, parent-teacher conferences, and other relevant meetings to discuss student progress. 6. Other Duties: Perform all other tasks and duties as assigned by the Senior Director of Special Populations Qualifications Education/Experience * Bachelor’s degree required * Master’s degree preferred * 3+ years experience teaching with a focus on special education services * Knowledge of MTSS, 504, and the 13 eligibility categories under IDEA and how they impact achievement * Knowledge of content standards and assessments * Experience in analyzing and implementing Federal, State and Local Special Education regulations, policies and procedures * Demonstrated proficient knowledge of computer operations such as Microsoft Office, Google Suite, and Outlook email Additional Information Compensation and Benefits As a full-time KIPP Texas employee you are eligible to participate in all KIPP Texas’ benefit plans. KIPP Texas offers a robust variety of benefits choices with competitive rates, including medical, dental, and vision options, life insurance, and disability plans. KIPP provides equal employment opportunities for all applicants and employees. As an equal opportunity employer, we hire without consideration of race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status, or disability.

Job DescriptionJob Title: Physician Territories: San Antonio, Texas About Bloom: Bloom Healthcare is a pioneering and employee-owned primary care and hospice practice at the forefront of transforming healthcare delivery for vulnerable patients. We bring high-touch, innovative medicine to those living at home and senior communities with chronic conditions. Bloom’s model of care is proven to provide exceptional care to the homebound population, and Bloom Healthcare has generated outstanding quality results in CMS Innovation Center models compared to our peers. At Bloom Healthcare, we believe in creating an environment that fosters growth, collaboration, and a shared sense of purpose. Bloom Healthcare has been voted the "Top Workplace" for six consecutive years. This honor reflects our unwavering commitment to our team. By nurturing a work culture that puts our team first, we empower them to put our patients first. As part of our commitment to reaching more patients in need of quality in-home care, we are excited to announce our entry into the vibrant healthcare market of San Antonio, Texas. We are looking for dedicated primary care providers to help bring our innovative care model and compassionate approach to healthcare to the residents of San Antonio and surrounding communities. By joining the Bloom Healthcare family, you're not only embarking on a rewarding career journey but also becoming a part of a community that genuinely cares about you. We thrive together, supporting one another; while making a significant impact in the lives of our patients. Become a part of our success story and experience firsthand why we are consistently voted the best place to work. Responsibilities: • Deliver comprehensive primary care at home/senior communities visits to patients, • Represent Bloom Healthcare in the San Antonio Market as a Bloom ambassador supporting our new market growth including market analysis to understand the local healthcare landscape and competitors., • Strategic planning to grow your patient panel and deliver comprehensive primary care at home visits to 10 patients per day., • Build trusted relationships by engaging with key members of our patients’ care teams, including assisted living facilities, hospitals, clinics, and community organizations, to facilitate coordination of care., • Collaborate with interdisciplinary teams, including specialists, pharmacists, and social workers, to coordinate care, address complex patient needs, and achieve optimal health outcomes., • Provide data-driven, condition-specific specialty visits to patients as needed, • Manage the health outcomes of an empaneled patient population, • Engage with and appropriately utilize population health data to drive superior patient outcomes, • Attend ongoing educational opportunities, • Commute to assigned assisted living communities to provide care at home, • Scheduled Days: Monday - Friday (3, 4, or 5 days), • Relocation assistance packages available, • Flexible schedules with rotating call (2-3x yr), • Approximately 10 visits per day, • 100% covered employee Health, Dental and Vision insurance on Day 1, • 401k, • Employer paid Basic Life and AD&D policies, • $325 Monthly Auto Allowance, • 3 weeks PTO & 7 paid holidays, • Company cell phone & tablet, • Licensing fees and liability insurance coverage, • A CME yearly allowance Physician Qualifications:, • Appropriate Licensure in the state of Texas, • Bilingual preferred but not required Our Physicians are supported by an excellent staff of MD’s, Nurse Practitioners, telephone triage, marketing ambassadors, IT, billing and scheduling personnel. Bloom Healthcare is an Employee owned and operated Company. Come be a part of an organization that has transformed the way healthcare is delivered! Bloom Healthcare is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all teammates. The salary for this position is competitive and commensurate with experience. The pay range for this role in the state of Texas typically falls between $225,000 - $260,000 annually with the potential for performance-based bonuses and other benefits. Actual compensation may vary based on factors such as qualifications, experience, and location within the state. #INDHP Bloom Healthcare only contacts through official channels using the @bloomhealthcare.com domain. We are aware of a fraudulent Gmail account impersonating our recruiting team and have reported it go Google. Powered by JazzHR vAqOVdZ3WP

Job Description The District Sales Manager is responsible for the sales of the organization's products in a specified district or major geographical area. This position sells the Company's products and services using technical, organizational, and customer knowledge to influence customers and assist them in applying the products/services to their needs resulting in revenue generation; in addition, the position provides input and participates in the marketing, market planning and technical development of products and services. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Hires, develops, evaluates, and influences effective and consistent productivity and teamwork to ensure the delivery of Legendary Customer Service (LCS), • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models and processes to ensure alignment with our Vision, Values, and Mission, • Develops and implements strategic sales plans to accommodate corporate goals, • Directs sales forecasting activities and sets performance goals accordingly, • Reviews market analyses to determine customer needs, price schedules, and discount rates, • Advises dealers and clients concerning sales and advertising techniques, • Assigns sales territory to sales representatives, • Analyzes sales statistics to formulate policy and assist dealers in promoting sales, • Represents company at trade association meetings to promote product, • Delivers sales presentations to key clients in coordination with sales representatives, • Meets with key clients, assisting sales representative with maintaining relationships and negotiating and closing deals, • Coordinates liaison between sales department and other sales related units, • Analyzes and controls expenditures of district to conform to budgetary requirements, • Prepares periodic sales report showing sales volume, potential sales, and areas of proposed client base expansion, • Monitors and evaluates the activities and products of the competition, • Recommends or approves budget, expenditures, and appropriations for research and development work, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Strong technical aptitude and understanding of construction equipment and rental industry, • Knowledge of economic and accounting principles and practices, the financial markets, banking and the analysis and reporting of financial data, • Uses logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems, • Exceptional customer service and relationship building skills; customer retention, • Excellent oral and written communication skills, • Excellent formal presentation skills after both small and large groups, • Interpersonal skills sufficient to engage with vendors, own staff, and corporate executives to exchange information, influence and persuade, • Excellent time management, multi-tasking, and organizational skills, • Advanced Microsoft Office skills to include Excel, Word, and PowerPoint, • Ability to coach and mentor less senior sales staff, • Ability to work with all levels of personnel within the organization and customer operations, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Ability to understand the implications of new information for both current and future problem-solving and decision-making, • Ability to perform mathematical computations such as percentages, fractions, addition, subtraction, multiplication, and division quickly and accurately, • Ability to work independently and within a team in a fast-paced, high volume environment with emphasis on accuracy and timeliness, • Ability to read, analyze, and interpret professional journals, technical procedures, or governmental regulations, • Ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • Five years of work-related skill, knowledge, or experience required, • High school diploma or equivalent required. Bachelor’s degree in Business or related field preferred, • Driven and results oriented; business development, KPIs, and market expansion to meet corporate targets Supervisory Responsibilities: • This position directs and manages the Texas First sales team. Responsibilities include, but are not limited to interviewing, hiring, and training employees; planning, assigning, and directing work; coaching and development; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Travel: • Up to 50% travel, • Valid driver’s license Physical Requirements: • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • Working conditions are primarily indoors in a professional office environment, • Occasionally works outdoors with possible exposure to temperature variations, damp/wet surfaces, hazardous materials, flammable liquids, high noise areas, dust, and unfavorable fumes and vapors, • Frequently works at fast pace with unscheduled interruptions Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-TFR

Job Description The ideal candidate shall provide technical expertise in support of, but not limited to: Item Managers, configuration management, data review, hardware repair and integration, and field level support. Spectrum's Equipment Specialist shall perform technical duties utilizing a broad knowledge of electronic equipment principles, and techniques and possess a thorough knowledge of digital and analog circuitry. Technical experience should include, but not limited to: • Installation, integration, adjustment, upgrade, modification, repair, operational checks, initial on-site system and operational capabilities awareness as required, repair management of communication and electronic hardware., • Provide general technical advice on installed and deployed COMSEC products radio frequency systems to CCSD and the program office. Requirements Required Skills and Experience: • 5 years of experience as an Equipment Specialist While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools, or control; reach with hands and arms: talk, see and hear. Employee must occasionally lift and/or move up to 25 pounds or more depending on the job. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Enviroment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Employee will routinely work on energized equipment using various electronic diagnostic equipment. Personal Protective Equipment (PPE) will be used at all times. Safety shoes will be used routinely. Hearing and sight PPE will be available on site. POSITION TYPE AND TYPICAL WORK HOURS: Eight hour day between Monday through Friday; 6:30 a.m. – 4:00 p.m (flexable). If a lunch break is taken, hours will be modified accordingly. JOB RELATED TRAVEL: Some travel is required; Employee will be given ample opportunity to prepare for any travel. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Wellness Resources, • Stock Option Plan

Job Description About the Role: The Ophthalmic Technician specializing in Diagnostic Testing plays a critical role in supporting ophthalmologists by performing specialized diagnostic procedures that aid in the detection, diagnosis, and management of eye diseases and conditions. This position involves operating advanced ophthalmic equipment to conduct tests such as visual field analysis, optical coherence tomography (OCT), fundus photography, and other diagnostic imaging techniques. The technician ensures the accuracy and quality of test results by preparing patients, calibrating instruments, and maintaining detailed records. Collaboration with the clinical team is essential to interpret preliminary findings and facilitate effective patient care plans. Ultimately, this role contributes significantly to improving patient outcomes through precise diagnostic support within a healthcare setting in SAOW. Minimum Qualifications: • Completion of an accredited Ophthalmic Technician or Ophthalmic Medical Assistant program., • Certification as an Ophthalmic Technician (e.g., JCAHPO Certified Ophthalmic Assistant (COA) or equivalent)., • Experience in performing ophthalmic diagnostic tests and operating related equipment, that includes, but is not limited to: VF, OCT, A-scans, B-scans, and other biometry tests., • Basic understanding of ocular anatomy, physiology, and common eye diseases., • Ability to communicate effectively with patients and healthcare team members., • Familiarity with electronic medical records (EMR) systems specific to ophthalmology., • Knowledge of additional diagnostic modalities such as fluorescein angiography or electroretinography., • Perform a variety of diagnostic ophthalmic tests including visual field testing, OCT, fundus photography, and pachymetry according to established protocols., • Prepare patients for diagnostic procedures by explaining the process, answering questions, and ensuring patient comfort and safety., • Operate, calibrate, and maintain ophthalmic diagnostic equipment to ensure optimal performance and accurate test results., • Record and document test results accurately in patient records and communicate findings to ophthalmologists and other healthcare professionals., • Assist in scheduling diagnostic tests and managing patient flow to optimize clinic efficiency., • Maintain compliance with healthcare regulations, infection control standards, and safety protocols within the diagnostic testing environment. Expected hours: 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Health savings account, • Paid time off, • Professional development assistance, • Referral program, • Uniform Allowance, • 8 hour shift, • Ophthalmology: 2 years (Required), • Ophthalmology Diagnostic Testing: 2 years (Required), • San Antonio, TX (Required), • 25% (Required) Skills: The required skills enable the technician to accurately perform and interpret a range of diagnostic tests critical for patient assessment, ensuring high-quality data collection and patient safety. Effective communication skills are essential for explaining procedures to patients and collaborating with ophthalmologists to support clinical decision-making. Technical proficiency with ophthalmic instruments and diagnostic software ensures reliable operation and maintenance of equipment, minimizing downtime and errors. Preferred skills such as advanced certifications and familiarity with EMR systems enhance the technician's ability to manage complex cases and streamline clinical workflows. Together, these skills contribute to delivering comprehensive diagnostic support that underpins excellent patient care in ophthalmology.

Job Description If you are a Civil PE that feels underutilized or has too many barriers to allow your growth, we may have the job for you! Magrym Consulting is a small firm looking to expand in the coming years, and we are looking for the right team members to help us get there. We promote a work environment where engineers can thrive and will have the opportunity to get noticed quickly for their talents and hard work. We encourage a healthy work-life balance by offering a flexible work schedule. We invest in developing our team by providing leadership training, monthly lunch and learns, and teambuilding exercises. In addition, we offer up to 40 hours of paid volunteer time per year. This position is responsible for performing civil engineering work and project management, for both private and public sector. Work may include site development, commercial development plans, subdivisions and roadways; utilizing Civil 3D and other applicable software programs. Must be looking to be part of a growing team, able to work independently and manage Junior Engineers and Drafters. Must show initiative to seek work and maintain great relationships with existing clients. Responsilbilities • Responsible for the overall engineering of the project, plan preparation, permitting, reports, etc. Including design, QA/QC of junior staff contributions, site visits, and meetings with client/contractors as needed., • Monitor the project’s budget & schedule., • Maintain client contact and relationship., • Design of subdivisions, grading plans, earthwork volumes and storm drainage calculations, design of utilities, including storm and sanitary sewers, paving, watermain, waterlines, waterline sizing, and street improvements., • Completes design calculations. Research code requirements and design procedures manuals., • Verifies design computations and plan detailing for conformance with codes, manuals, and design considerations., • Utilizes CAD and various software applications. Seeks technical information from peers when problems are encountered and expected to be outside of one’s own area of expertise., • Prepares correspondence, technical specifications and reports. Attends and participates at client and municipal meetings., • Communicates with project team members, client representatives, review agencies, and others as appropriate to project., • Coordinates final design computations with review agencies., • Prepares opinions of cost, quantities, periodic reports, pay estimates, and data necessary to document acceptability of materials and quantities for final payment., • Capable of dealing with multiple responsibilities concurrently. 10-years of experience as a Civil Engineer preferred. Must maintain a professional licensure in Texas with the ability to obtain a license in New Mexico within 12 months. KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of engineering and data analysis techniques and theories. Skill in the use of computers and computer-aided design equipment and in the use and maintenance of scientific instruments. This is not a remote position. Position is in Midland, Texas. Benefits Health Insurance (HDHP), Vision and Dental 401K Retirement Plan Long Term/Short Term Disability Insurance Life Insurance Paid Time Off Sam's Club Membership Gym Membership

Job DescriptionJob Title: Physician Territories: Northeast San Antonio, Texas About Bloom: Bloom Healthcare is a pioneering and employee-owned primary care and hospice practice at the forefront of transforming healthcare delivery for vulnerable patients. We bring high-touch, innovative medicine to those living at home and senior communities with chronic conditions. Bloom’s model of care is proven to provide exceptional care to the homebound population, and Bloom Healthcare has generated outstanding quality results in CMS Innovation Center models compared to our peers. At Bloom Healthcare, we believe in creating an environment that fosters growth, collaboration, and a shared sense of purpose. Bloom Healthcare has been voted the "Top Workplace" for six consecutive years. This honor reflects our unwavering commitment to our team. By nurturing a work culture that puts our team first, we empower them to put our patients first. As part of our commitment to reaching more patients in need of quality in-home care, we are excited to announce our entry into the vibrant healthcare market of San Antonio, Texas. We are looking for dedicated primary care providers to help bring our innovative care model and compassionate approach to healthcare to the residents of San Antonio and surrounding communities. By joining the Bloom Healthcare family, you're not only embarking on a rewarding career journey but also becoming a part of a community that genuinely cares about you. We thrive together, supporting one another; while making a significant impact in the lives of our patients. Become a part of our success story and experience firsthand why we are consistently voted the best place to work. Responsibilities: • Deliver comprehensive primary care at home/senior communities visits to patients, • Represent Bloom Healthcare in the San Antonio Market as a Bloom ambassador supporting our new market growth including market analysis to understand the local healthcare landscape and competitors., • Strategic planning to grow your patient panel and deliver comprehensive primary care at home visits to 10 patients per day., • Build trusted relationships by engaging with key members of our patients’ care teams, including assisted living facilities, hospitals, clinics, and community organizations, to facilitate coordination of care., • Collaborate with interdisciplinary teams, including specialists, pharmacists, and social workers, to coordinate care, address complex patient needs, and achieve optimal health outcomes., • Provide data-driven, condition-specific specialty visits to patients as needed, • Manage the health outcomes of an empaneled patient population, • Engage with and appropriately utilize population health data to drive superior patient outcomes, • Attend ongoing educational opportunities, • Commute to assigned assisted living communities to provide care at home, • Scheduled Days: Monday - Friday (3, 4, or 5 days), • Relocation assistance packages available, • Flexible schedules with rotating call (2-3x yr), • Approximately 10 visits per day, • 100% covered employee Health, Dental and Vision insurance on Day 1, • 401k, • Employer paid Basic Life and AD&D policies, • $325 Monthly Auto Allowance, • 3 weeks PTO & 7 paid holidays, • Company cell phone & tablet, • Licensing fees and liability insurance coverage, • A CME yearly allowance Physician Qualifications:, • Appropriate Licensure in the state of Texas, • Bilingual preferred but not required Our Physicians are supported by an excellent staff of MD’s, Nurse Practitioners, telephone triage, marketing ambassadors, IT, billing and scheduling personnel. Bloom Healthcare is an Employee owned and operated Company. Come be a part of an organization that has transformed the way healthcare is delivered! Bloom Healthcare is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all teammates. The salary for this position is competitive and commensurate with experience. The pay range for this role in the state of Texas typically falls between $225,000 - $260,000 annually with the potential for performance-based bonuses and other benefits. Actual compensation may vary based on factors such as qualifications, experience, and location within the state. Bloom Healthcare only contacts through official channels using the @bloomhealthcare.com domain. We are aware of a fraudulent Gmail account impersonating our recruiting team and have reported it go Google. Powered by JazzHR gcYrEIKjrt

Job Description Job Description Job Title: Cloud Data Engineer Summary: The Cloud Data Engineer collaborates with cross-functional teams to deliver efficient data engineering processes, data solutions, and operations support. Wage Type: Salaried Essential Duties & Responsibilities: To perform this job successfully, an individual must be able to perform each of the essential duties satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Support clear communications both within the organization and to business partners around any data initiatives, planning, and problem resolutions, including Databricks workspace collaboration., • Operations Support, • Be the go-to person for production support. Troubleshoot issues, identify bottlenecks, and ensure smooth data operations., • Work closely with our partners and internal staff to address any data-related concerns promptly., • Keep a watchful eye on system performance and proactively address any anomalies., • Data Engineering, • Design, develop, and maintain scalable cloud-based data architectures on AWS and Databricks., • Implement efficient ETL/ELT processes using Databricks notebooks, Delta Lake, and Apache Spark., • Collaborate with cross-functional teams to understand data requirements and ensure data solutions meet business needs., • Utilize AWS services such as S3, Glue, Redshift, and EMR, and integrate with Databricks Workspaces for unified data processing., • Ensure data security, integrity, and compliance with industry standards and regulations, including role-based access control (RBAC) in Databricks., • Troubleshoot and optimize existing ETL processes for performance and reliability using Databricks performance tuning techniques., • Stay updated on emerging cloud technologies and recommend improvements to enhance data engineering capabilities, including Databricks Lakehouse architecture., • Collaborate with data scientists and analysts to provide accessible and high-quality data for analytics and reporting via Databricks SQL and Unity Catalog., • Carries out responsibilities in a manner consistent with our values and operating principles, in accordance with policy and applicable laws, and with a commitment to continuous improvement and process excellence., • Production support of the cloud-based data ecosystem through troubleshooting, debugging, analysis, and code deployments, including Databricks job orchestration and monitoring via Databricks Jobs UI. Reports to: Head of Data Engineering & Integrations Supervises: N/A Qualifications: Education: • Proven experience as a Cloud Data Engineer with expertise in AWS services., • Strong background in designing and implementing ETL processes., • Familiarity with data modeling, database design, and optimization techniques., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment., • Strong communication skills to articulate technical concepts to non-technical stakeholders. Desired Experiences: • Describe any "required" experiences - these are must have experiences, • AWS certifications in relevant areas., • Experience with Apache Nifi, Apache Nifi Registry, • Knowledge of data warehousing concepts and practices., • Familiarity with DevOps practices in a cloud environment., • Knowledge of Banking and Financial Services, • Strong positivity., • Mission driven, competitive, goal oriented, and motivated to develop themselves and others., • Energetic, resourceful, and appropriate work intensity to get the work done, • Strong people acumen and relationship skills; Naturally pre-disposed to quickly establish positive personal and professional relationships. Other: • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

Job Description Please note that Jackson Walker is not currently accepting search firm submissions in connection with this opening. Director of Conflicts Analysis and Resolution Department: Office of the General Counsel Reports To: General Counsel Location: This role can sit in any of Jackson Walker's office locations. (Dallas / Austin / Houston / San Antonio / Fort Worth) FLSA: Exempt POSITION SUMMARY: The Director of Conflicts Analysis and Resolution leads Jackson Walker’s firmwide conflicts program, ensuring the timely identification, analysis, and resolution of conflicts of interest across all client matters, lateral hires, and internal operations. This role plays a critical part in safeguarding the firm’s ethical compliance, mitigating risk, and supporting efficient business intake processes. The Director manages the conflicts team, collaborates closely with attorneys, Recruiting, Business Intake, and firm leadership, and develops policies and practices that strengthen the firm’s overall risk-management framework. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conflicts Analysis & Clearance • Oversee the end-to-end conflicts review workflow for new clients, new matters, and firmwide business intake., • Evaluate conflict reports, perform legal and factual analysis, and provide clear recommendations to attorneys and leadership regarding potential conflicts and resolution paths., • Analyze complex conflict scenarios requiring interpretation of ethical rules, case law, waivers, and screening requirements., • Facilitate discussions between attorneys when conflict issues arise and support timely, practical resolution., • Lead conflicts analysis for all lateral attorney candidates and groups., • Review conflict reports prepared by analysts and ensure accurate, thorough evaluation of incoming matters and prior representations., • In consultation with the General Counsel, determine whether waivers, consents, ethical walls, or withdrawals are needed., • Ensure compliance with professional responsibility rules, firm policies, applicable laws, and regulatory requirements related to conflicts of interest and ethical screens., • Partner with the General Counsel to design, refine, and implement conflicts policies, procedures, and best practices., • Monitor changes in ethics rules and industry standards and update internal protocols accordingly., • Lead, coach, and develop the conflicts team, promoting accuracy, responsiveness, risk awareness, and continuous improvement., • Collaborate with Business Intake, Recruiting, Practice Group Leaders, IT, and other operational teams to ensure seamless conflict clearance processes., • Develop and deliver training to attorneys and staff on conflicts awareness, ethical compliance, and best practices., • Oversee conflicts software platforms, ensuring data integrity, functionality, and optimal use of technology., • Partner with IT and vendors to evaluate enhancements, implement system upgrades, streamline workflows, and adopt emerging tools., • Generate reports and dashboards that provide insights into conflicts trends, clearance times, risk indicators, and team performance., • Bachelor’s degree required; J.D. preferred with license to practice law in the United States and in good standing with the Texas Bar., • Minimum of 8 years’ experience in conflicts, risk management, professional responsibility, or compliance within a law firm or professional services environment., • Deep understanding of conflicts of interest rules, legal ethics, and professional responsibility frameworks., • Proven leadership experience in managing teams and driving decisions in high-pressure, time-sensitive environments., • Strong analytical and communication skills with the ability to synthesize complex information and advise senior leadership., • Experience with conflicts software systems, legal research tools, and business intake processes. This position operates in a typical professional office environment with standard equipment. The role requires professionalism, discretion, and the ability to manage multiple priorities while maintaining attention to detail. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of essential functions, responsibilities, or requirements. We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, veteran status, sexual orientation, gender identity, pregnancy, genetic information, or any other characteristic protected by law and will not be discriminated against on the basis of disability. It is our intention that all qualified applicants are given equal opportunity and that employment decisions be based on job-related factors. If you require a reasonable accommodation to complete the application or interview process, please contact us at

Job Description Gavin de Becker & Associates is a dynamic security firm innovating threat assessment and public figure protection. Our mission aims to protect and enhance the lives of those we serve. From media figures and transnational corporations to universities and women's shelters, GDBA stands on the front line of the assessment, prediction, and management of violence. This is an entry-level Analyst position in our Investigations Division for candidates interested in pursuing a career in investigations and intelligence. This position is based in San Antonio, TX and will be a mixture of in-person work and remote work. Suitable candidates should be able to commute to North San Antonio, TX. Required Qualifications • You're a college graduate who is inquisitive and eager to learn. You're a self-starter., • You like solving puzzles. You can sort through a lot of information and decipher connections., • You're able to handle multiple deadlines and competing priorities. You can shift gears quickly., • You are a strong writer who is able to persuade others and get your viewpoint across., • You carry yourself with confidence, are poised in meetings, and are able to think on your feet., • You are able to exercise discretion and confidentiality., • You've worked in an office, and you're comfortable in a fast-paced work environment., • You've been exposed to general legal principles and procedures; maybe you're thinking about law school or have worked in a law firm or an investigative firm., • You're familiar with Open Source Intelligence (OSINT) and computerized legal research. For example, for a paper, you used LexisNexis, or perhaps you have used TLO or another data broking website in an entry level position you're working now. You'll be joining an ambitious team whose mission is to assess risk, pursue leads, mitigate concerns through conducting pre-employment background investigations. Successful candidates who have previously pursued this position have typically demonstrated an interest in law, psychology, and criminal justice. Research • Evaluate court records, public documents, open sources, database records and other investigative sources., • Review, identify, and analyze trends and inconsistencies in reporting and research findings., • Draw actionable and impactful conclusions to mitigate risk and acquire hard-to-find information., • Compensation ranges from $50k-$60k depending on experience, • Long-Term Opportunities. We encourage our associates to develop and deploy their strengths. At GDBA, ideas matter, • Benefits. Medical, Dental, Vision, Life Insurance, Long-Term Disability Insurance, and Paid Time Off, • $15,000 employer contribution for First-Year Associates, • $3,000 employer contribution each year thereafter Learn more about our organization by visiting our website, following GDBA on social media, or connecting with us on LinkedIn.

Job Description Job Description Job Title: Banking and Financial Services Intern This is an onsite assignment at our San Antonio office. Summary: TransPecos Banks has an immediate need for a Banking & Financial Services Intern(s) as well as temporary employment opportunities. These opportunities are ideal for students entering their junior or senior years as well as recent graduates. We are looking for talented individuals who learn quickly, are comfortable in ambiguous situations, and demonstrate strong people acumen. If you are interested in business, financial services, fin-tech, credit analysis, commercial lending, loan operations, deposit operations, accounting, human resources, or analytics we might have an assignment for you! Wage Type: Hourly Essential Duties & Responsibilities: To perform this job successfully, an individual must be able to perform each of the essential duties satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Work well with others and on their own., • Manages their time to complete assignments on time., • Carries out responsibilities in a manner consistent with our values and operating principles, in accordance with policy and applicable laws, and with a commitment to commitment to continuous improvement and process excellence., • Any other duties as assigned. Organizational Structure: Reports to: Designated Manager or HR Qualifications: Required Knowledge/Skills: • Working towards or completed bachelor's degree in Business, Data Analytics, Finance/Accounting, or other business-related fields Desired Knowledge/Skills: Related experience Talents: • Strong positivity., • Mission driven, competitive, goal oriented, and motivated to develop themselves and others., • Energetic, resourceful, and appropriate work intensity to get the work done, • Corrected vision., • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

Job Description is seeking a highly motivated and entrepreneurial individual to join our team as a Commercial Real Estate Investment Sales Agent. This position is well-suited for professionals who are disciplined, self-directed, and eager to build a successful career in commercial real estate investment sales. This role will focus on business development, market research, financial underwriting, and transaction management. The ideal candidate possesses a strong work ethic, a commitment to excellence, and the ability to operate effectively in a performance-based, commission-only environment. Key Responsibilities: • Proactively identify and develop new business opportunities with property owners, investors, and developers, • Conduct in-depth market research and analysis to support client advisory services, • Perform financial analysis and property underwriting to assess investment viability, • Coordinate and manage the transaction process from initial listing to closing, • Maintain a high level of client service, professionalism, and industry knowledge A Successful Candidate: • Is confident negotiating in person and over the phone, • Enjoys meeting new people, • Feels comfortable with heavy outbound sales calls, • Bounces back quickly from rejection Qualifications: • Strong interpersonal, communication, and negotiation skills, • Analytical aptitude and attention to detail in financial modeling and valuation, • Demonstrated ability to work independently and manage multiple priorities, • Prior experience in commercial real estate, finance, or sales is preferred but not required, • Comprehensive training and mentorship from experienced industry professionals, • Access to proprietary data, marketing platforms, and CRM tools, • A collaborative, performance-driven team environment, • High earning potential based on individual performance and initiative

Job Description Software Defined Radio Development Engineer Signing Bonus Location: Huntsville, AL Position Type: Full-Time | Hybrid Relocation assistance (if applicable) Why Join Secmation Secmation is a proven, mission-focused engineering company with more than a decade of success delivering real capability to the defense community. We operate with the speed, ownership, and tight-knit culture of a small business-backed by the credibility and track record that comes from 10+ years of successful execution. Here, engineers build systems that matter, move fast, and ship technology that directly impacts national security. Small company. Big mission. Real engineering. Join the Future of Secure Communications Secmation is seeking a Software Defined Radio Development Engineer with deep expertise in RF systems, military communications, and Software-Defined Radios (SDR). In this hands-on role, you will design, develop, and optimize embedded software solutions that enable secure communications and electronic warfare capabilities for mission-critical defense systems. You will work at the intersection of embedded cybersecurity, signal processing, and RF communications, collaborating closely with RF, hardware, and systems engineers to influence system architecture and technical direction while delivering high-impact solutions to government customers. What You'll Do • Design, implement, and optimize embedded software for advanced RF and communications systems, with an emphasis on SDR-based platforms., • Lead development and integration of signal processing algorithms, communication waveforms, and security features, ensuring performance, reliability, and mission readiness., • Collaborate across disciplines (RF, hardware, systems, integration, and test) to define software requirements and support secure, resilient system architectures for defense and industrial applications., • Drive hardware-in-the-loop (HWIL) testing, mission simulations, and field validation, troubleshooting complex system-level issues and improving end-to-end system performance., • U.S. citizen with an active DoD TS Clearance., • Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or a related technical field., • 7+ years of progressive experience in embedded software development for RF, communications, or signal-processing-centric systems., • Strong experience developing software in Linux-based embedded environments., • Deep technical expertise in communication systems, RF, and SDR frameworks, such as GNU Radio, REDHAWK, or similar platforms., • Experience with radio equipment modeling and simulation, including performance analysis and optimization., • Solid understanding of digital signal processing concepts, including modulation, error correction, adaptive techniques, and waveform optimization., • Hands-on experience working in Agile/DevOps environments, using tools such as Git, Jira, and CI/CD pipelines.Work Environment, • Hybrid role with on-site work required in Huntsville, AL, • Flexible 9/80 work schedule (every other Friday off)., • Collaborative, fast-paced, and technically innovative environment with remote team integration. Compensation & Benefits • Competitive salary (based on experience and market conditions), • One-time signing bonus, • Company equity, • Relocation assistance, • 9/80 work schedule (every other Friday off), • Paid time off & flexible work schedules, • Comprehensive health, dental, and vision insurance, • Life and disability insurance (short & long-term), • 401(k) retirement benefits plus employer contributions About Secmation Secmation is not an IT company - we specialize in AI-driven software solutions, embedded cybersecurity, and secure RF systems for the defense industry. Our mission is to deliver next-generation secure technologies for electronic warfare, autonomous systems, and critical defense applications. Visit to learn more about our work and impact. Equal Opportunity Employer Secmation is proud to be an equal opportunity employer. We are committed to building a diverse and inclusive team. All qualified applicants will be considered for employment without regard to age, race, gender, orientation, identity, religion, or veteran status. U.S. Citizenship is required for this position due to government clearance requirements. The salary range for this position represents a general guideline; however, Secmation considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills, work location, current market conditions, and other bona fide data. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors.

Job Description Gormat is looking for an Intrusion Analyst to discover, analyze, and document malicious or unauthorized activity using information collected from a variety of SIGINT and computer network defense resources. You will analyze metadata collected from tasked communications systems in order to identify, locate, and track targets, and to accurately report the intelligence gained from metadata analysis. You will categorize traffic as benign, suspicious, or malicious activity; and document malicious tactics, techniques, and procedures (TTPs). You will also develop and implement mitigation strategies. The ideal candidate will have a network and/or host-based focus. The Intrusion Analyst shall possess the following capabilities: • Relevant experience must be in malware analysis, • Programming experience in C, C#, C++, Java, Perl, or Python is preferred., • CISSP, GIAC GREM or CREA Certification is preferred for level 1. Level 1: • Bachelor's Degree with 2 years of relevant experience., • Master's Degree with 3 years of relevant experience., • Bachelor's Degree with 5 years of relevant experience., • Doctoral degree plus 4 years of relevant experience, • Master's degree with 6 years of relevant experience, • Bachelor's Degree with 8 years of relevant experience, • Doctoral degree plus 7 years of relevant experience, • Master's degree with 9 years of relevant experience, • Bachelor's Degree with 11 years of relevant experience Bachelor's Degree in Computer Science, Computer Engineering, Information Systems, or related discipline from accredited college or university. Certifications Required: • CISSP, CEH, Sec+, Net+, GIAC GREM and/or CREA Certification is required for Level 2 and 3 TS/SCI with polygraph is required. Job Posted by ApplicantPro

Job Description Job Title: Information Security Analyst This position is an on-site assignment (preferred). Summary: The Information Security (IS) Analyst is responsible for protecting the bank's digital assets and infrastructure (including cloud infrastructure) from cyber threats and managing information security risks in alignment with industry standards and regulatory expectations. This role involves monitoring systems, analyzing security incidents, conducting risk assessments, assisting with executing Identity & Access Management (IAM) processes, and ensuring compliance with regulatory requirements. The IS Analyst also assists with establishing sound governance functions and ensuring internal controls are operating effectively. Wage Type: Salaried Essential Duties & Responsibilities: To perform this job successfully, an individual must be able to perform each of the essential duties satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Monitor and analyze security alerts from tools such as SIEM, IDS/IPS, DLP, and endpoint protection systems., • Investigate and respond to cybersecurity incidents, including root cause analysis and remediation., • Conduct vulnerability assessments and penetration testing; lead efforts to recommend mitigation strategies and ensure remediation plans are executed timely., • Support Secure Development Lifecycle (SDLC) processes and ensure secure development processes are imbedded and enforced throughout the SDLC., • Manage processes for securing the bank's cloud infrastructure, with a focus on Microsoft Azure and AWS., • Monitor emerging (or changes to) regulatory requirements, threats, and industry trends, advising leadership on necessary changes and improvements Generate reports and metrics for management and regulatory bodies., • Maintain and update IS policies, procedures, and standards in alignment with industry frameworks (i.e., NIST CSF 2.0) and regulatory requirements (FFIEC, GLBA, etc.)., • Develop and maintain security documentation, playbooks, and training materials., • Manage and monitor security awareness, education, and training to employees., • Perform internal and vendor IS risk assessments (including data privacy and other regulatory risk assessments). Lead remediation efforts of control gaps identified., • Assist in the management and testing of the bank's Business Continuity Plan (BCP) and Disaster Recovery Plan (DRP) to ensure operational resiliency and rapid recovery in case of disruptions., • Support centralized IAM governance and daily processing of access requests and provisioning., • Manage IS metrics monitoring and reporting; Prepare reports and dashboards to communicate compliance performance to senior management and stakeholders; Monitor and report on the status of risk remediation activities., • Support audits, inspections, and reviews conducted by regulators and external parties., • Carries out responsibilities in a manner consistent with our values and operating principles, in accordance with policy and applicable laws, and with a commitment to commitment to continuous improvement and process excellence., • Any other duties as assigned. Key Deliverables: • Satisfactory audit results and regulatory examinations., • Timeliness and accuracy of risk assessments and reporting., • Satisfactory and timely resolution of compliance incidents. Organizational Structure: Reports to: Director of Information Security Supervises: NA Qualifications: Education: • Bachelor's degree in Business Administration, Finance, Risk Management, Law, or a related field., • 2-4 years of experience in an IS or cybersecurity role, preferably in the banking or financial services sector., • Familiarity with banking regulations, Interagency Information Security Standards and cyber security frameworks (e.g., NIST 2.0 CSF/RMF, PCI DSS, FFIEC, FDIC part 364 Appendix B, GDPR, etc.)., • Strong technical aptitude with Microsoft Azure and AWS Cloud Infrastructure with experience managing cloud security tools (i.e. Sentinel, Defender, Purview, AWS Security Hub and other native security tools, etc.), • Strong analytical and problem-solving skills., • Knowledge of risk assessment methodologies and compliance frameworks., • Proactive and analytical professional with a strong understanding of regulatory compliance in the banking sector., • Strong positivity., • Mission driven, competitive, goal oriented, and motivated to develop themselves and others., • Energetic, resourceful, and appropriate work intensity to get the work done, • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

Job Description The Technology Specialist I, installs, repairs, upgrades, calibrates, and troubleshoots current and future technology products. In addition, this position trains customers on all levels of survey infrastructure products and machine technology. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Demonstrates technology products and recommends the best technology solutions for each customer application, • Installs laser, Global Positioning System (GPS), and Universal Total Station (UTS) systems on all makes and models of heavy equipment and sets up correctional GPS sources, i.e., Base Stations, Internet Base Station Service (IBSS) or Virtual Reference Station (VRS), • Teaches customers and employees on effective utilization of the technology products to optimize productivity and monitor machine health to include, but not limited to; Laser systems, GPS systems, UTS system, Infrastructure, Survey Products, Site Calibrations, File Management, VisionLink, and Winflash, • Coordinates with manager to develop product database that will assist in troubleshooting and works with other departments to ensure customer needs are met, • Creates and initiates machine communications with back office for downloading/uploading of models and uploading of surface data information, • Troubleshoots electrical systems, CAN and Ethernet networks, and hydraulic systems, documenting the process to increase understanding and efficiencies, • Performs system testing with sample/live data and technology, • Maintains and improves current technology, • Verifies site calibrations using proper survey techniques and trouble-shoot using the same. If the site calibration is bad, can use rovers, robotic total stations, auto levels, and can run a level loop if necessary, to identify the problem, • Works with various programs to include, but not limited to, MAS, SiSweb, ET, Business Center, Trimble Connected Community, Veda, and Trimble Store, • Install, measure up, calibrate Earthworks platforms on all models and machine brands of supported machines with use of robotic total stations and survey products, • Performs application calibrations, troubleshooting, root cause analysis, and problem resolution, • Service Technician tests, diagnoses, repairs, and adjusts electronic and optical equipment to ensure that they are in the optimal working order. This position is a multidisciplinary role requiring operational understanding, and underlying methodologies for heavy civil site construction., • Utilizes Business Center software to update customer files, check for modeling errors and verify data, • Works with other departments to ensure that customer’s needs are met, • Trains customers on CAT integrated technology products, • Pulls and prepares inventory to complete tasks, • Covers periodic rotations on the “SITECH Help Desk” where the technician must be able to help customers troubleshoot machine and off machine issues over the phone using their extensive technology knowledge. Must work through customer issues while mental visualizing what the customer is doing and explaining. Must maintaining patients and professionalism to help solve the customer issues. This is a customer service role., • Requires regular and punctual employee attendance, • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge with current computer software, related hardware, and machine electronic systems, • Strong electric diagnostic skills, schematic reading, and understanding, • Working knowledge 3D site modeling and the interaction of models with machine controls and site calibrations, • Ability to operate multiple sized and brands of heavy equipment to include motor graders, dozers, loaders, skid steers, asphalt trimmers, rock mills, piling machines, paving systems to include but not limited to asphalt pavers, concrete pavers and curbing machines., • Ability to install and repair hydraulic valve systems and associated control systems, • Strong electrical system experience. Ability to read and understand electrical system schematics, troubleshoot the same with a multi meter and sound troubleshooting techniques. Ability to troubleshoot CAN network systems. Also, able to build and pin out cables to make cables or to correct wiring issues., • Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams, • Ability to cut, grind, weld, and solder, • Excellent work habits, accuracy, attention to detail, and quality of work, • Excellent customer service skills, • Verbal and written communication skills, • Ability to follow logical troubleshooting procedures, • Effective influencing skills which include teaching, motivating, and developing customers and employees, • Strong organization and time management skills, • Critical thinking and problem-solving skills, • Ability to work independently and as part of a team, • Ability to be self-starting and self-motivated, • Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Strong computer skills and the ability to work in Microsoft Word, Excel, CAD, AGTEC, in addition to various warehouse and accounting programs Education and Experience: • High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred, • Trimble Certified Trainer preferred, • None Travel: • Up to 30% travel may be required, to include overnight stays, • Valid Driver’s License required Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Frequently communicates with others, must be able to exchange accurate information in these situations, • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Occasionally lifts and moves materials and equipment up to 50 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Requires wearing common protective or safety equipment, • Works in an enclosed and open vehicle or equipment, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration, • Works in confined workspaces, awkward positions, and high places, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job DescriptionExperienced account manager with minimum of 5 years of experience This Jobot Job is hosted by: Chandler Kane Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $85,000 - $110,000 per year A bit about us: We believe in the importance of our team members as a cornerstone of our success. We are dedicated to fostering a workplace that not only appreciates your skills and contributions but also places a high priority on your overall well-being. Joining our team means becoming part of a dynamic group that cares about your professional growth and personal fulfillment. Why join us? Competitive Compensation: We acknowledge and appreciate top-tier talent by offering a competitive salary structure that reflects your valuable contributions. Health and Wellness: Your well-being is a priority for us. We provide an inclusive health insurance package, encompassing dental and vision coverage. Flexible Work Arrangements: Maintain a harmonious work-life balance with our 8-5 work schedule. We recognize the significance of supporting your family and catering to unique needs. Professional Development: Elevate your skills and career trajectory through our unwavering commitment to continuous learning. Avail yourself of opportunities for training, workshops, and career progression. Retirement Planning: Safeguard your future with our retirement planning options, featuring a 401(k) plan with employer matching. Generous Paid Time Off: Revitalize and reenergize with our expansive paid time off policy. We firmly believe that carving out time for yourself is fundamental for sustained success. Job Details Job Details: We are seeking a seasoned and dynamic Accounting Manager to join our team. This is a permanent position that provides a unique opportunity to play a pivotal role in our financial management, including direct responsibility for accounting, finance, forecasting, strategic planning, job costing, legal, property management, deal analysis and negotiations, investor relationships and partnership compliance, and private and institutional financing. You will be responsible for managing and overseeing all aspects of our accounting and financial operations, and will work closely with the executive management team. Responsibilities: 1. Oversee and manage the general accounting functions, including, but not limited to: accounts payable, accounts receivable, general ledger, and taxes., 2. Coordinate and prepare internal and external financial statements., 3. Coordinate activities of external auditors., 4. Manage the budget process., 5. Maintain a system of controls over accounting transactions., 6. Manage the production of the annual budget and forecasts., 7. Provide financial analysis tools to evaluate company ventures or special projects, programs, capital expenditures, products costing, etc., 8. Work with senior teams to grow the business through financial planning., 9. Ensure compliance with local, state, and federal budgetary reporting requirements., 10. Implement process improvements to enhance the efficiency and accuracy of the monthly, quarterly and annual reporting process., 11. Oversee the financial operations of subsidiary companies and foreign operations., 12. Manage any third parties to which accounting or finance functions have been outsourced., 13. Monitor debt levels and compliance with debt covenants. Qualifications: 1. Bachelor's degree in Accounting, Finance, or related field., 2. Minimum 3+ years of experience in a managerial finance or accounting position., 3. Proven experience in financial reporting, financial planning, and analysis., 4. Proficient in corporate finance and internal controls., 5. Strong leadership skills with a dedication to driving and achieving results., 6. Knowledge of federal and state financial regulations., 7. Advanced knowledge of accounting best practices, laws, standards, and state/national regulations., 8. Excellent analytical and mathematical skills., 9. Strong communication skills, both written and verbal., 10. Proficiency in accounting software., 11. Strong problem-solving and decision-making skills., 12. Ability to multi-task in a fast-paced environment with fluctuating priorities and deadlines., 13. Ability to work without direct supervision, and efficiently manage tasks and time., 14. Merger and acquisition finance experience., 15. CPA or MBA preferred. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionRelocation + Sign on Bonus Offered + ESOP Profit Sharing + You Voice Matters + Employee Owned (share in the success!) + Opportunity to Build in an Established and Well Known Brand This Jobot Job is hosted by: Chelsea Piekarski Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $95,000 - $170,000 per year A bit about us: We are a 100% employee-owned engineering and consulting firm with a 60+ year history of delivering geotechnical, environmental, and materials testing expertise across the U.S. Our teams partner with clients in municipal, K-12, commercial, and institutional markets to design practical, reliable solutions that strengthen infrastructure and communities. What makes us unique is our ownership model: every employee is also an owner, sharing directly in the company’s success. That mindset drives collaboration, accountability, and long-term commitment. We’re in active growth mode, expanding our footprint and building key markets with an entrepreneurial approach backed by decades of technical excellence. Joining us means stepping into a culture where your expertise is valued, your career path is supported, and you have a true voice in shaping the company’s future. Why join us? • Last year ESOP paid 11% (of base + bonus), 13% retirement, etc.. TRULY UNMATCHED COMPENSATION POTENTIAL, • Opportunity to build and shape a growing market — not just maintain work, • Direct impact on strategy and growth trajectory ($2M market scaling to $5M+), • Leadership pathway with mentoring and succession built into role design, • Highly supportive VP leadership — straightforward, invested in people, • Employee-owned company with strong benefits, PTO, 401(k), and ESOP Job Details We are seeking a Senior Geotechnical Engineer to join our San Antonio office. This role is mission-critical as the team builds out the local market, with the opportunity to shape and grow operations well beyond current size. Responsibilities • Manage complex geotechnical and construction materials testing projects, • Lead geotechnical investigations, scoping, proposals, budgeting, field investigations, lab testing, and analysis, • Develop practical geotechnical solutions and author comprehensive reports, • Balance technical execution with client engagement (initially ~60/40), • Build and maintain client relationships across municipal and K–12 markets, • Provide direction and mentorship to junior engineers as the office grows, • BS in Civil, Geotechnical, or related engineering (MS preferred), • 5+ years geotechnical engineering experience (7+ ideal), • 3+ years practicing in San Antonio market, • PE in Texas required, • Experience with municipal/K–12 clients preferred but not required; CMT experience 1–2 years, • Strong technical expertise across earthwork, concrete, analysis, and reporting, • Entrepreneurial mindset with desire to grow a local office Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionRelocation + Up to $25K Sign on Bonus Offered + ESOP Profit Sharing + You Voice Matters + Employee Owned (share in the success!) + Opportunity to Build in an Established and Well Known Brand This Jobot Job is hosted by: Chelsea Piekarski Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $95,000 - $170,000 per year A bit about us: We are a 100% employee-owned engineering and consulting firm with a 60+ year history of delivering geotechnical, environmental, and materials testing expertise across the U.S. Our teams partner with clients in municipal, K-12, commercial, and institutional markets to design practical, reliable solutions that strengthen infrastructure and communities. What makes us unique is our ownership model: every employee is also an owner, sharing directly in the company’s success. That mindset drives collaboration, accountability, and long-term commitment. We’re in active growth mode, expanding our footprint and building key markets with an entrepreneurial approach backed by decades of technical excellence. Joining us means stepping into a culture where your expertise is valued, your career path is supported, and you have a true voice in shaping the company’s future. Why join us? • Up to $25K sign on bonus (DOE) & relocation assistance, • Last year ESOP paid 11% (of base + bonus), high retirement, etc.. TRULY UNMATCHED COMPENSATION POTENTIAL, • Opportunity to build and shape a growing market, • Direct impact on strategy and growth trajectory ($2M market scaling to $5M+), • Leadership pathway with mentoring and succession built into role design, • Highly supportive VP leadership — straightforward, invested in people, • Employee-owned company with strong benefits, PTO, 401(k), and ESOP Job Details We are seeking a Geotechnical Project Engineer to support and elevate our expanding San Antonio market. This role manages moderate to highly complex geotechnical projects and provides deep technical expertise to clients across education, municipal, transportation-adjacent, and commercial sectors. This is a high-visibility role with meaningful influence on strategy, execution, and long-term market growth. What You’ll Do • Perform geotechnical site investigations, site characterizations, and assign laboratory testing, • Prepare full engineering reports with practical, actionable recommendations, • Scope and develop proposals for moderate to complex projects, • Manage all aspects of assigned projects, including scope, schedule, and budget, • Lead and mentor junior engineering staff, • Build and maintain internal and external client relationships, including face-to-face interactions, • Conduct engineering analysis using industry methodologies and standards, • Engage in community involvement to strengthen regional presence, • Work in compliance with corporate health and safety policies, • Bachelor’s degree in geotechnical, civil, or related engineering (Master’s preferred), • Professional Engineer (PE) license required, • Five or more years of geotechnical engineering and CMT-related project management experience, • Experience with Texas PK–12, municipal, or commercial development, • Strong ability to work independently and operate as a self-starter, • Proven experience preparing proposals, scopes, and technical reports, • Excellent written, verbal, analytical, and client-facing skills, • Ability to lift 50–75 pounds periodically and travel up to 25%, • Willingness to relocate to San Antonio (relocation support available) Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description About Pax Services Group: Pax Services Group is a full-service roofing and exterior services provider for institutional, commercial, multi-family, and industrial segments. We take pride in providing our customers with unparalleled services and products, while maintaining a safe working environment for all employees. Job Summary: This position is responsible for developing cost estimates and construction schedules ranging from rough-order-of-magnitude level to detailed working cost estimates, guiding owner selections, and presenting the results in a format suitable for use by the client and design team. We are looking for someone who has excellent people and communication skills and can think outside of the box for creative problem-solving. Duties/Responsibilities: • Meet and collaborate with clients, engineers, and other staff to understand the products being developed., • Re-enforce our value proposition and strengthen relationships with owners, contractors, suppliers and new customers in conjunction with the Business Development Leader., • Maintain and grow client portfolio with new and existing customers., • Attend pre-bid meetings., • Manage and organize invitations to bid and requests for proposal (RFP). Review Notice to Procced letters (NTP), and contracts for scope and price accuracy., • Analyze project specifications and drawings to compile project notes, RFI’s, and scope development., • Measure buildings, verify dimensions, perform test cuts when necessary., • Complete take off and estimate with the Edge Estimating Software., • Handle estimating functions, to include bids, pricing, and change orders., • Review and analyze existing and proposed processes, staff, and materials; identifies cost-reduction opportunities., • Draft and develop detailed proposals and cost estimates for projects based on data analysis and research; distributes reports to project managers, engineers, contractors, clients, and other stakeholders., • Prepares reports forecasting production scenarios; makes recommendations based on findings., • Work with Project Managers to perform project handoffs, resolve disputes with clients, and help resolve past due accounts efficiently., • Identify opportunities within the estimates to outperform estimated cost and coordinate with the project management and production teams., • Participate in job completion financial analysis, track performance metrics and bid results., • Performs other related duties as assigned. Required Skills/Abilities: • 1 year experience and knowledge of project managing / estimating in commercial roofing., • Knowledge of commercial roofing with single-ply, asphalt, cold applied, hot applied and metal projects, preferred. • Strong analytical and problem-solving skills with the ability to create forecasts based on financial data. • Preferred experience with Edge Estimating., • Ability to analyze specifications and drawings., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Proficient with Microsoft Office Suite or related software. Education and Experience: • High School Diploma / GED Physical Requirements: • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at a time. Position available in San Antonio, Austin, Waco Texas

Job Description BCforward is currently seeking a highly motivated AML Analyst / Compliance / Teller/ Fraud for a job opportunity located in San Antonio, TX 78258 ( Onsite ) Position Title: AML Analyst / Compliance / Teller/ Fraud Location: 20855 Stone Oak Pkwy, San Antonio, TX 78258 ( Onsite ) Please note this is the target date and is subject to change. BCforward will send official notice ahead of a confirmed start date. Contract duration : 6 months contract with possible extensions Payrate : This position pays $30.00 per hour on W2 Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per Job Responsibilities: • Interpretation of AML Risk standards, guidelines, policies and procedures., • Make risk based determination through Quality Analysis whether alerts were properly cleared by Compliance Alerts Analysts., • Ensure Alert data has been accurately collected and documented, including but not limited to: Investigations data, Suspicious Activity Reports (SARS) & Currency Transaction Reports (CTR), Know Your Customer (KYC) information, any relevant account and transaction data and all required information which would assist in an investigation. About BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class place to work. BCforward is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability. To learn more about how BCforward collects and uses personal information as part of the recruiting process, view our Privacy Notice and CCPA Addendum. As part of the recruitment process, we may ask for you to disclose and provide us with various categories of personal information, including identifiers, professional information, commercial information, education information, and other related information. BCforward will only use this information to complete the recruitment process. This posting is not an offer of employment. All applicants applying for positions in the United States must be legally authorized to work in the United States. The submission of intentionally false or fraudulent information in response to this posting may render the applicant ineligible for the position. Any subsequent offer of employment will be considered employment at-will regardless of the anticipated assignment duration. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description Title: Custom Machine Design Engineer lll Company: Trinity Employment Specialists Location: San Antonio, TX (On-site) Salary Range:$119,691 - $140,679 / Annually Job Summary: Trinity Employment Specialists is seeking a Custom Machine Design Engineer to lead the design, procurement, and commissioning of custom machinery, including CNC winders and electrically, hydraulically, or mechanically driven systems. Responsibilities include full lifecycle design, fabrication, installation, startup, and troubleshooting of specialized equipment. Proficiency in SolidWorks and AutoCAD is required for detailed fabrication drawings with precise tolerances and manufacturability. Experience with automation, PLC systems, hydraulics, and DFM—including motor sizing, gearbox and shaft sizing, and bearing selection—is highly desirable. Primary Duties & Responsibilities: • Lead custom machine design projects, optimizing equipment performance and manufacturing processes., • Collaborate with product design engineers to define specifications and manufacturing methods., • Prototype new equipment or processes to support production., • Translate performance requirements into detailed specifications for equipment and processes., • Analyze and optimize layouts, industrial processes, and equipment placement., • Recommend process and equipment improvements using current technologies and best practices., • Collaborate with electrical engineers for automation integration., • Design test equipment and procedures to evaluate product performance and reliability., • Manage vendor relationships for component sourcing, fabrication, machining, and assembly., • Prepare and approve technical packages, including drawings, BOMs, data sheets, specifications, and calculations., • Estimate costs, prepare bids, and manage budgets and schedules to ensure on-time, on-budget project delivery., • Oversee installation, operation, maintenance, and repair of machines to meet specifications., • Investigate operational issues, determine root causes, and recommend corrective actions., • Bachelor’s degree in Mechanical Engineering or related field required; Master’s preferred., • 5–10+ years of experience in custom equipment design, ideally in composite manufacturing., • Full project or machine system ownership from concept to commissioning., • Independent project execution with minimal supervision., • Expertise in FEA, tolerance stack-ups, and material selection., • Approves design and procurement decisions and reviews others’ work., • Proficient in AutoCAD and SolidWorks for fabrication drawings and BOMs., • Experienced with shop fabrication, machining, hydraulics, automation, PLC systems, DFM, structural/thermal calculations, and tolerance analysis., • Dependable and proactive in communication and work continuity., • Applies logical, evidence-based problem-solving and sound judgment., • Active listener who incorporates feedback to improve design outcomes., • Demonstrates critical thinking and proposes technically justified improvements., • Manages complex engineering problems with multiple constraints., • Read and interpret technical drawings, schematics, and reports., • Strong mechanical aptitude and problem-solving skills., • Proficient in 2D/3D CAD design with AutoCAD and SolidWorks., • Experience with FEA, material selection, structural/thermal calculations, and tolerance analysis., • Knowledge of shop fabrication, machining, hydraulics, automation, PLC systems, and DFM., • Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems. #MED TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter. Please visit the Career Center on our website for some helpful resources to help in your job search, to build a resume, for interview tips and many job opportunities! • Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Job Description About Nuevo Garcia Foods At Nuevo Garcia Foods, we approach every day with a focus on preserving our legacy originally created by the Garcia family over 60 years ago, while uncovering new ways to win and drive sustainable, profitable growth as we establish the future of our company. We are committed to adding value in the marketplace through strategic and focused growth that leverages our core competencies, portfolio of products, and leadership experience. If you are looking for a great place to work, we would love to hear from you. We have an exciting opportunity for a Production Coordinator to join our family! Role Summary: Serves as the primary liaison between production planning and execution. Ensures all production activities are accurately scheduled, tracked, and recorded in the system. Supports operational continuity by managing schedules, coordinating materials, and maintaining data integrity. Key Responsibilities: • Maintain and update daily production schedules in alignment with sales and inventory plans, • Enter production data into ERP/WMS systems, ensuring completeness and accuracy, • Coordinate with operations, warehouse, and purchasing to align material readiness with production, • Track WIP and finished goods in real time to support inventory accuracy, • Identify bottlenecks or schedule conflicts and escalate as needed, • Generate reports to support planning, forecasting, and production reviews, • Provide systems training and support to line staff as needed, • Strong organizational and time-management skills., • Experience in ERP systems (e.g., SAP, Oracle, Sage100), • High attention to detail with the ability to spot and correct data entry errors., • Working knowledge of production workflows, inventory control, and manufacturing operations., • Strong communication and coordination skills across departments., • Problem-solving and critical thinking abilities., • Experience with lean manufacturing principles or production scheduling methodologies., • Intermediate to advanced Excel skills (e.g., pivot tables, lookups)., • Familiarity with material requirements planning concepts., • Office and floor hybrid role - roughly 70% office-based and 30% on the production floor., • Must be comfortable working in manufacturing or warehouse environments with exposure to machinery, noise, and varying temperatures., • Frequent use of computers and standard office equipment., • May require standing, walking, or observing production lines for extended periods., • Occasional lifting of materials, boxes, or equipment (up to 25 lbs)., • High School Grad/GED, College Degree Preferred, • Minimum of 2 years of experience in a production, planning, or operations coordination role., • Experience working in ERP environment is required., • Background in manufacturing, distribution, or assembly-based operations highly preferred., • Exposure to inventory management, scheduling, or demand planning a plus.

Job Description Position: Production Manager Location: San Antonio, TX Industry: Food Manufacturing (mandatory) Client : Food And Beverage Manufacturing Client Salary Range: $70,000 – $76,000 (FIXED NOT A DOLLAR MORE) Position Overview The Production Manager will lead and optimize production planning and execution across multiple U.S.-based manufacturing facilities, ensuring on-time delivery, efficient resource utilization, and strong cross-functional alignment. Key Requirements • 5+ years of experience in production planning / supply chain / manufacturing operations, • Food manufacturing experience is required, • Strong hands-on experience with ERP/MRP systems, • Advanced Excel and data analysis skills, • Experience supporting shift-based production environments, • Ability to work cross-functionally with Procurement, Logistics, and Operations, • Willingness to travel up to 30%Nice to Have, • Exposure to international manufacturing partners RjRD1ijKFS

Job Description Type: Full Time Location: Wilford Hall, San Antonio (JBSA)-Lackland Overtime Exempt: No (SCA) Reports To: ARMADA HQ Security Clearance Required: N/A Sign on Bonus Available: Yes, $2K for qualified applicants. Duties & Responsibilities: Emergency Medical Technician (EMT)/Paramedic Instructor will provide classroom and field instruction to enhance the response in Emergency Medical Care and trauma situations for all military members. All services shall be provided in accordance with established certifications, standards, principles and ethics of the profession and applicable professional specialty organizations including the following: the Joint Commission standards, applicable Department of Defense (DoD) Defense Health Agency (DHA), National Association of Emergency Medical Technician (NAEMT), military specific regulations, directives, and policies, and Medical Training Facility (MTF) specific policies and procedures. • The courses will be held 3 weeks a month, with a one-week break for manikin maintenance, supplies, environment review of the grounds and administrative duties., • Emergency Medical Technician (EMT)/Paramedic Instructor shall provide in classroom and field - education and training to prepare students to assess, advise, and react, effectively during emergency and/or trauma situations. Curriculum for EMT's and LVN, will be provided by the government., • Training manikin checks and safety walk around of the field areas., • Provide a nursing overview for competencies. The course is designed for all different Air Force Specialty Code (AFSC) and having clinical personnel will buffer technicians with a para-professional person., • The Emergency Medical Technician (EMT)/Paramedic Instructor shall facilitate the achievement of optimal outcomes in relation to training in trauma care, quality, and cost effectiveness. The required outcome result is to enable the Emergency Medical Technician Paramedic to react quickly and efficiently to real world emergency situations, when encountered with obstacles, by using the tools available in the performance measures. Instructor may assist in the development of the Benefit Cost Analysis (BCA)., • The program coordinator shall advise and assist the instruction provided by other healthcare professionals., • Conduct research in support of improved practice and patient outcomes., • Provide safe training environment - identify, track and report all safety hazards within the field training area., • Assist program coordinator on educational program administrative requirements, to include maintenances of program, course, student/participant records, and preparation and submission of data and reports at the end of each course. Monthly/annual reports will be completed by the program coordinator with the assistance of the instructors. These monthly reports/annual reports are associated with the number of students, number of courses, Air Force Specialty Code/Military Occupational Specialties of the students, equipment usage, test results (pre-test/post test scores); etc. The purpose of these reports are to measure instructors' metrics and validate the programs' efficiency., • The Emergency Medical Technician (EMT)/Paramedic Instructor shall provide quality standardized instruction in accordance with the established policies, procedures, and guidelines used in the Joint Trauma System/Civilian agencies and MTFs. Emergency Medical Technician (EMT)/Paramedic Instructor will teach per curriculum and demonstration compliance of skills/instruction, • Present all course materials in an effective fashion using didactic, hands-on and simulation training modalities., • Provide course oversight for field, including instructional components of the standardized curriculum., • Recognize discrepancies and develop solutions and reports them to the program coordinator., • Provide course evaluation documentation to leadership, identify trends and opportunities for improvement. Course and Instructor shall be evaluated by the Program Coordinator and cadre instructors., • Emergency Medical Technicians (EMT)/Paramedic Instructor shall be accountable for providing course assignments based on the scope of practice and skill level of assigned personnel., • Recognize safety measures and quickly react in real world emergency and exercise situations., • Communicate and collaborate with a diverse group of people for the purpose of informing the healthcare team of plans/actions, for teaching/education to benefit the medical readiness posture., • Maintain currency requirements based on certification., • Develop or assist in the creation of marketing materials for conference and education events (i.e. conference brochure), • Participate in continuing professional development programs as appropriate., • Fulfill simulation course and operations for manikins utilized for field instruction., • Verbalize knowledge of emergency response to life threatening conditions and medical response for all point of injuries., • Demonstrate hands-on skills and provide safety environment for students to demonstrate skills., • Demonstrate appropriate operations of all equipment and supplies to include manikins., • Perform didactic and hands on skills for teaching students., • The Emergency Medical Technician (EMT)/Paramedic Instructor must obtain and maintain the following courses within 6 months: Trauma Combat Casualty Course (TCCC), Medical Provider Instructor (MPI) Course or Instructor status in any Advanced Trauma Field Training Course., • Three years of experience in the last 5 years as a First Responder or Emergency Department., • Emergency Medical Technician (EMT)/Paramedic Instructor shall possess and maintain unrestricted license to practice as an Emergency Medical Technician (EMT) in Texas., • Must be able to lift 40 lbs and walk up to 200 yards without assistance., • Associate degree in healthcare with emphases on training/education is required from an accredited college or university., • All contractors must possess and maintain current Basic Life Support (BLS) Certification. The above information has been designed to indicate the general nature and level of work to be performed. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of the contractor assigned to this position. Applying: If you feel you have the knowledge, skills and abilities for this position visit our careers page at . Special Notes: Relocation is not available for these jobs. ARMADA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. ARMADA complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Must be able to successfully pass a background check, and pre-employment drug testing. Job offers are contingent upon results of background check and drug testing.

Job DescriptionDescription: Autism Treatment Center Position Requirements: Teacher’s Assistant UNIT: Educational Services TITLE OF SUPERVISOR: Behavioral and Educational Services Coordinator (BESC) SHIFT: Full-Time Year-round Monday - Friday 8:00 am - 4:00 pm STATUS: Non-Exempt PAY: $13.00-15.00/hr, opportunities for unlimited overtime hours While this position requirement statement is intended to be an accurate reflection of the job requirements, the Program Director, Management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. This position involves tasks that expose you to mucous membrane contact, skin contact, blood, bodily fluids, bodily tissues, and/ or the potential for spills and splashes of these fluids. Use of appropriate protective measures (i.e., universal precautions, blood-borne pathogen procedures) is required for every employee engaged in this position. Purpose: The teacher’s assistant (TA) works directly with students in order to help them attain and maintain the skills necessary to achieve maximum functional independence. The TA supports and promotes the rights of the students and functions effectively as a member of the Interdisciplinary Team. Essential Functions: The following tasks must be performed by all staff members in this job category. Basic Responsibilities • Follow ATC Policies and Procedures, • Adhere to universal precautions and blood-borne pathogen standards, • Use the least restrictive methods necessary to maintain the safety of the student, self, and others, • Communicate appropriately with students, caregivers, coworkers, and supervisors, • Follow the basic principles of applied behavior analysis, • Conduct direct teaching with students, including functional academics, communication, social interaction, community integration, recreational skills, vocational skills, and daily living skills, • Implement the objectives and procedures identified in the Individual Education Plan, Behavior Intervention Plan, and other educational and behavioral protocols, • Collect educational and behavioral data, • Complete required documentation in a timely manner (e.g., incident reports, injury reports, etc.), • Assist with housekeeping tasks to maintain a safe, orderly environment, • Transport students to appointments and recreational activities, • Supervise meal and snack times, • Attend meetings and in-service training as scheduled, • Administer medication under the approval and supervision of the nurse or the BESC, • Report hazardous equipment or conditions to the Safety Committee, • Report repair or maintenance needs to the Facilities Coordinator, • Report student illness, injury, or medical concerns to the Nurse, • Report any indication of abuse or neglect to the QIDP, • Report behavioral occurrences or concerns to the BESC, • Monday – Friday, 8:00 am – 4:00 pm, • Year-round Occasionally (1 – 33% of the time) • Lift and carry 40lbs – 80lbs while handling students, • Push a wheelchair holding a student whose total weight may exceed 200 pounds, • Engage in fine-motor movements such as grasping small objects, • Engage in gross-motor movements such as standing, walking, bending, and squatting in order to respond to the needs of the students, • Engage in the range of motion necessary to work and play with the students, • Be able to read and write, • Be reliable with timeliness and attendance, • Work as an effective and productive member of a team, • Be receptive and responsive to feedback from coworkers and supervisors, • Provide an organized environment for safe and effective teaching and learning, • Provide a welcoming and compassionate environment for the students and their caregivers, • Work with students with Developmental Disabilities, academic deficits, and behavioral needs, • Communicate clearly and effectively within a team, • Exhibit patience and flexibility, maintain a positive attitude, and handle stressful situations appropriately, • Meet physical requirements in order to safely manage behavior and actively participate with students, • Respond quickly and effectively in emergency situations, • Maintain current CPR, First Aid, and SAMA certifications, • Maintain current Texas Driver’s License, • Perform SAMA techniques as needed, • Perform CPR as needed, • Perform an abdominal thrust maneuver as needed, • Staff must be able to safely complete the following tasks involving tools and equipment:, • Measure temperature using an ear thermometer, • Drive an automobile or a wheelchair-accessible van, • Assist with the use of Alternative and Augmentative Communication Devices, • Monitor fire alarm devices, • Use computers, tablets, iPads, copy machines, and cell phones as needed Possible Safety and Health Risks • Blood or bodily fluid exposure, • Slip or fall exposure, • Physical and/or verbal abuse exposure from students or their caregivers, • Exposure to muscle strain from lifting, stooping, reaching, and twisting

Job DescriptionDescription: Please note, there is no sponsorship is available at this time Who we are: EDAG (Production Solutions group) is your perfect partner for the planning, design, optimization and implementation of greenfield and brownfield manufacturing facilities, associated support facilities, and manufacturing / process equipment and systems. With a workforce of approx. 1,300 employees, and the knowledge and experience we have gained over several decades, we are multi-disciplinary innovators in the development of production plants. We are familiar with the challenges, legal requirements and, of course, all relevant issues relating to our customers’ production, and are able to provide optimum advice and active support for the reorganization or optimization of their plants. As engineers, we speak the same language as our customers and understand their problems and requirements. It goes without saying that we are fully committed to cost efficiency and the use of state-of-the-art processes and technologies. We transfer this know-how equally to our three business fields: automotive solutions, industrial solutions and mobility solutions. Worldwide. This is how you will grow: • Process analysis and optimization: Analyze existing systems and processes to find inefficiencies and develop solutions for improvement., • System design: Design and integrate new systems, including workflows, facilities, and management information systems., • Data analysis: Use mathematical modeling, simulation, and data analysis to identify areas for improvement and measure the effectiveness of solutions., • Collaboration: Work with cross-functional teams, such as operations, quality control, and supply chain, to implement changes., • Quality and cost control: Implement quality control standards and strategies to reduce waste and costs while ensuring product quality., • 4-year engineering degree required, • Must be MOST certified and have documented experience using MOST to determine labor requirements., • Minimum of 2 years’ experience in an industrial setting., • Strong communication and organizational skills needed

Job Description About Nuevo Garcia Foods At Nuevo Garcia Foods, we approach every day with a focus on preserving our legacy originally created by the Garcia family over 60 years ago, while uncovering new ways to win and drive sustainable, profitable growth as we establish the future of our company. We are committed to adding value in the marketplace through strategic and focused growth that leverages our core competencies, portfolio of products, and leadership experience. If you are looking for a great place to work, we are hiring Tamale Technicians to join our family. The Role A Tamale Technician will be responsible for loading food products into stuffers and moving product from raw to finished goods. This position assists with the preparation, cooking, assembly, weighing, and packaging of products, along with documenting production numbers and operating basic machinery safely. As a Tamale Technician, you will contribute to the team's efforts to achieve production efficiencies while adhering to company guidelines and following Health & Safety and Food Safety Programs. In this role, you will effectively support the company and its goals, as well as your team. Essential Duties and Responsibilities: • Follows daily line assignment as directed by supervisor or lead using simple tools and equipment and may include following recipe guidelines to assist with food preparation and cooking tasks, • Ensure daily production is completed efficiently, on time and meets company quality standards, • Update and maintain accurate production records, including math calculations, scan and update data in computer and digital scorecard, • Load, pack, and seal products into cases and palletizes as needed, • Inspects production goods, containers, and packaging materials to ensure they meet company standards, • Demonstrate knowledge of kitchen health, safe food storage, and safety guidelines, • Adheres to proper food handling, sanitation, and safety procedures by following company standards, GMPs (Good Manufacturing Practice), maintaining temperature and HACCP (Hazard Analysis Critical Control Points) logs as required, • Ensure compliance with safety regulations, company policies, quality programs, and report any safety issues or unsafe conditions, • Participate is safety training and keep work area safe and orderly through regular housekeeping, • Train others, demonstrate best practices and willingness to adapt, grow and take on new responsibilities including rotating jobs and becoming certified on machinery, • Ability to work independently and well with team members in a fast-paced environment, showing a teamwork attitude by respecting and supporting team members, • Be dependable, punctual, and adhere to company attendance with regular attendance as an essential job function, • Tolerate extreme temperatures, wet and humid environments, and high noise levels while wearing protective devices, • Stoop, kneel, crouch, crawl, and stand for extended periods, as well as walk, reach, bend, smell, listen, speak, and see in order to perform the essential job duties, • Work around moving mechanical parts and frequently lift, push, and slide packages up to 50lbs (occasionally up to 70lbs), • Demonstrate attention to detail, effective time management, and adaptability in a fast-paced production environment, • Read, write, understand simple instructions, and perform simple math calculations, • High school diploma or equivalent a plus or related experience, • Ability to perform mathematical calculations and unit conversions, • Strong teamwork and communication skills, • Good manual dexterity and hand/eye coordination, • Bilingual in Spanish/English a plus, • One year of previous tamale production and/or related experience necessary Hourly Rate: Pay is based on experience and starts at $14.50 an hour Benefits: • Health insurance, • Dental & Vision insurance, • 8-10-hour shift, • Monday to Friday Work Location: On Site

Job Description The Utilization Review Coordinator conducts utilization reviews to determine if patients are receiving care appropriate to illness or condition. Monitors patient charts and records to evaluate care concurrent with patients’ treatment. Reviews treatment plans and status of approvals from insurers. Responsible for monitoring adherence to the hospital's utilization review plan to ensure the effective and efficient use of hospital services. Monitors the appropriateness of hospital admissions and extended hospitals stays. Completing data collection of demographics, claim and medical information; non-medical analysis; and outcomes reporting. May consult with staff as needed. Essential Duties: • Evaluate patient medical records to assess the appropriateness and quality of care provided., • Verify the accuracy and completeness of documentation to support medical necessity., • Analyze treatment plans and interventions to ensure they align with patient needs and best practices., • Collaborate with healthcare providers to make recommendations for adjustments or improvements in treatment plans., • Verify insurance coverage and benefits to determine eligibility for services., • Communicate with insurance providers to obtain authorization for services as needed., • Conduct utilization reviews to monitor and optimize the use of healthcare resources., • Identify and address any utilization patterns that may indicate inefficiencies or deviations from standards of care., • Maintain accurate and detailed records of utilization review activities and outcomes., • Prepare reports and summaries of findings for internal review and compliance purposes. This job description is not intended to be all-inclusive. Employee may perform other related duties to meet the ongoing needs of the hospital. Duties may be modified or changed with or without notice. Requirements Education and/or Licensure – Bachelors. Experience – 1 year of relatable experience required, 3 preferred Additional Requirements – None. Knowledge Skills and Abilities • Must have basic PC skills that include a combination of working in a Windows Operating System and Microsoft Outlook, Word and Excel., • Has knowledge of governmental and managed care payer requirements., • Demonstrates understanding of the various "Self-Pay" account classifications and their applicable patient statement processes., • Understands the data elements required to generate a clean bill., • Understands the importance of maintaining confidentiality; able to maintain confidentiality under HIPAA standards., • Must have the ability to exercise a high degree of diplomacy and tact; excellent customer services and interpersonal communication skills; Cultural sensitivity and demonstrated ability to work with diverse people groups., • Well-developed verbal and written communication skills in English; Additional language abilities desirable., • Knowledge of basic math and modern office procedures., • Ability to work well under pressure with minimal supervision., • Ability to remain seated at switchboard for long periods of time without significant discomfort or distress. Perform the following with or without reasonable accommodations: • • Ability to work competently with computer-based charting and other clinical and non-clinical software programs. • Adaptability to change and good organizational skills required. Ability to read and communicate effectively in English., • Can be expected to do presentations as directed. Working knowledge of criteria for Medicare, Medicaid, HMO, and private insurance carrier's coverage details., • Ability to advocate for patients. Ability to operate office equipment. Possess critical thinking skills., • Leadership skills required for role include effective mentoring, coaching, counseling, time management, problem solving, and strategic planning., • Demonstrates initiative and proactive approach to problem resolution., • Ability to effectively interact with insurance companies and community healthcare recourses., • Ability to work in a stressful, fast paced environment. 401K, Medical/Dental insurance, FMLA and Short-Term Disability • Health Insurance, • Vision Insurance, • Dental Insurance, • 401K Retirement Plan, • Healthcare Spending Account, • Dependent Care Spending Account, • PTO Plan with Holiday Premium Pay, • Life Insurance (Supplemental Life, Term, and Universal plans are also available.), • Short and Long-Term Disability (with additional buy-in opportunities)

Job Description As an AI Engineer at Tek Spikes, you will be at the forefront of developing innovative artificial intelligence solutions that enhance our products and services. Your role will involve designing and implementing machine learning models, analyzing large datasets, and working collaboratively with cross-functional teams to integrate AI capabilities into our software solutions. You will leverage your expertise in AI techniques to solve complex problems and improve business outcomes. Key Responsibilities: • Develop and implement machine learning algorithms and models to meet specific business needs., • Analyze and preprocess large datasets to derive insights and improve model performance., • Collaborate with data scientists and software engineers to integrate AI solutions into existing applications and systems., • Optimize and fine-tune machine learning models for efficiency and accuracy., • Stay current with the latest research and trends in artificial intelligence and machine learning technologies., • Provide technical guidance and support to junior team members and contribute to knowledge sharing within the team. Qualifications: • Bachelor’s or Master’s degree in Computer Science, Data Science, Machine Learning, or related field., • 4+ years of experience in AI/ML development, with a strong foundation in algorithm design and statistical analysis., • Proficiency in programming languages such as Python, R, or Java, with experience using libraries like TensorFlow or PyTorch., • Solid understanding of data structures, data modeling, and database management., • Familiarity with cloud-based AI/ML platforms (Azure ML, AWS SageMaker, Google AI) is a plus., • Excellent problem-solving skills and the ability to think critically about complex challenges., • Strong communication skills, both written and verbal, with the ability to convey technical concepts to non-technical stakeholders.

Job Description Position Summary: Work cooperatively with current customers, outside sales and other members of the distribution team to maintain current customer base and pursue additional opportunities, ensuring the highest level of customer satisfaction. Responsibilities: • Abide by IPP’s safety and Health Policies and Procedures including wearing proper PPE and maintaining a safe work environment., • Provide sound business judgment when interacting with each customer. This includes using independent discretion, creativeness, and quantitative analysis when handling each interaction, i.e., especially when pricing material, considering customer market pricing, quantity and type of material requested., • Complete all SAP TASKS given by Manager to help convert quotes to orders., • Ensure customers satisfaction is achieved through product knowledge and properly communicating with customers in a timely manner according to customer needs and bid dates., • Address customer inquiries and determine customer requirements and expectations to recommend specific products and solutions., • Work with supply-chain production and utilize inventory management software to accurately determine availability and delivery of products to customers., • Determine price and availability for customers’ RFQs ensuring our material is available, competitively priced and focused on maximizing profit., • Communicate with distribution manager to obtain shipping and freight pricing and estimated time of arrival., • Review new purchase orders (POs) to ensure correct pricing, item codes, and freight terms to ensure information is properly communicated to data entry., • Will occasionally assist with accurately entering purchase orders into the sales software system to ensure correct product, pricing, and shipment., • Prior to shipping, review order acknowledgement against customer purchase order ensuring customer information, freight company, shipment method, payment terms and product codes are correct., • Follow up on product quotes to provide additional information and close out any outstanding quotes., • Communicate with management regarding customer needs and determine tentative solutions to arrive at a quote. Non-Essential Functions: • Contact customers following a sale to ensure ongoing customer satisfaction, resolve any possible issues, and identify any trends in customer satisfaction or dissatisfaction. Education & Experience: • Bachelor's degree in technical or business discipline or equivalent experience., • Minimum of 3 years of customer service or sales experience. Knowledge, Skills and Abilities: • Ability to work independently with little oversight in a fast-paced environment., • Ability to provide sound business decisions and financial analysis., • Strong organizational skills, including time management, attention to detail, the ability to multi-task, prioritize workflow, and possess analytical thinking and basic math skills., • Strong verbal and written communication., • Knowledge of Internet, MS Office Suite, and sales lifecycle management tools., • Ability to sense and relate observations to business opportunity, coachable, ability to pick up new tasks quickly. Physical Conditions: • This position will work under general office conditions; however, it may be required to walk or move to other areas of the building to interact with other departments Equal Opportunity Employer: We are an equal opportunity employer and welcome applicants from all backgrounds and experience to apply. Company DescriptionImproved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.Improved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.

Job Description We are seeking a highly motivated and talented individual to join our team as a Civil Engineer in Training. As a growing civil engineering firm specializing in municipal infrastructure, we offer an exciting opportunity for someone who is eager to learn, grow, and contribute to our success. If you are passionate about delivering high-quality projects, committed to client satisfaction, and eager to grow your career in civil engineering, this opportunity is for you! Responsibilities: • Assist in the design and analysis of civil engineering projects, focusing on municipal infrastructure., • Collaborate with a multidisciplinary team to develop innovative solutions that meet client requirements., • Support project managers in ensuring timely project delivery and gain valuable exposure to project management processes and assist in the coordination of project deliverables, including cost estimation, resource allocation, and schedule management., • Conduct site visits, perform field investigations, and gather data to inform engineering designs., • Prepare engineering drawings, specifications, and technical reports., • Participate in quality control processes to ensure adherence to standards and client expectations., • Stay updated with industry trends, advancements, and best practices in civil engineering., • Engage in marketing and business development activities to contribute to the growth of the firm., • Foster a collaborative and positive work environment by actively contributing to teamwork and knowledge sharing. Qualifications: • Bachelor's degree in Civil Engineering (Masters in Civil Engineering is a plus)., • 2-4 years of experience in civil engineering or relevant internships., • Proficient in CAD software and other engineering design tools., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Demonstrated ability to manage multiple tasks and meet project deadlines., • Commitment to delivering high-quality work and exceeding client expectations., • Self-motivated with a passion for learning and professional growth., • Knowledge of municipal infrastructure design and regulations is preferred., • EIT certification. Additionally, we understand the importance of providing our team members with the necessary exposure and opportunities to develop the most valuable skills needed to become successful civil engineers. Here are some additional exposure opportunities we offer: • Collaborative Project Environments: Engage in collaborative project environments where teamwork and knowledge sharing are encouraged. This fosters a supportive atmosphere that allows you to learn from experienced professionals and gain insights into different project approaches and techniques., • Client Interaction and Business Acumen: Engage directly with clients, understanding their needs, and developing solutions that meet their objectives. Participate in client meetings, proposal development, and client presentations to build strong client relationships and develop a comprehensive understanding of project management and business development. This exposure helps you understand the broader aspects of the industry, client expectations, and project acquisition strategies., • Project Leadership Opportunities: As you progress in your career, we provide opportunities for you to take on project leadership roles. This allows you to develop essential skills in project management, including team coordination, budgeting, scheduling, and client communication., • Continued Education and Certifications: We support and encourage our team members to pursue further education and certifications relevant to their career development. This may include attending specialized training programs, obtaining advanced degrees, or acquiring professional certifications in areas such as project management, sustainable design, and data analysis., • Industry Involvement and Networking: We encourage active involvement in professional organizations and industry events. This provides exposure to the latest advancements, industry trends, and networking opportunities with experts and peers, further enhancing your professional growth and knowledge., • Mentorship Programs: Our firm believes in the power of mentorship. We offer mentorship opportunities where experienced professionals provide guidance, advice, and support throughout your career journey. This mentorship helps you navigate challenges, develop your skills, and gain valuable insights from industry veterans. We offer a competitive salary commensurate with experience and a comprehensive benefits package. Join our team and be part of a dynamic firm that values integrity, quality, innovation, teamwork, and client commitment. As we grow, you will have the opportunity to be involved in marketing, business development, and project management, allowing you to build a well-rounded knowledge base and advance your career.

Job Description About the Company We're a collaborative and forward-thinking company where your analytical skills will directly impact our success. About the Role Are you an Administrative Assistant with a knack for numbers and a passion for turning insights into action? Do you love diving deep into spreadsheets and unearthing valuable trends? We're looking for a Data Analyst to join our team and help us make smarter decisions! Responsibilities · Analyze and Interpret Data: You'll be a data detective, meticulously examining information to find patterns, anomalies, and key insights that drive business decisions. · Collaborate and Communicate: Work closely with different departments to understand their data needs, present your findings clearly, and help translate insights into strategic actions. · Identify Opportunities: Spot trends that could lead to increased efficiency, cost savings, or new revenue streams. · Ensure Data Integrity: Play a key role in maintaining the accuracy and reliability of our data. Qualifications · A few years of experience in an Administrative Assistant, Data Analyst role or similar, where you regularly worked with large datasets. Required Skills · A strong understanding of Microsoft Excel, including, VLOOKUPs, conditional formatting, and data visualization (charts, graphs). · Strong analytical and problem-solving skills; you love a good puzzle! · The ability to communicate complex data findings in a clear, concise, and engaging way to both technical and non-technical audiences. · A meticulous eye for detail and a commitment to data accuracy. Preferred Skills · Background working with data in Excel Ready to build upon your data analysis skills? Apply today and help us unlock the power of our data! Company DescriptionCollaborative Environment: Work alongside a dedicated, supportive team focused on innovation Growth Opportunities: We invest in our employees’ professional development, offering ample opportunities for learning and career advancement Competitive Compensation: We provide a comprehensive benefits package and a competitive salary commensurate with experience Family-Oriented Culture: As a family-owned business, we foster a sense of teamwork, respect, and flexibility that helps everyone succeedCollaborative Environment: Work alongside a dedicated, supportive team focused on innovation\r\nGrowth Opportunities: We invest in our employees’ professional development, offering ample opportunities for learning and career advancement\r\nCompetitive Compensation: We provide a comprehensive benefits package and a competitive salary commensurate with experience\r\nFamily-Oriented Culture: As a family-owned business, we foster a sense of teamwork, respect, and flexibility that helps everyone succeed

Job DescriptionDescription: About Darkhive, LLC Darkhive is making robotics accessible. Established in 2021, we are focused on the application of robotics in the public safety and defense communities. Our approach in accessibility is built on three pillars: low-cost, ease-of-use, and open interface design. With our autonomy software stack, military and public safety users intuitively interact with our robotics platforms which enable them to understand their environment and make decisions when it matters most. Our palm-sized, autonomous drone demonstrates the capabilities of our integrated software and hardware solutions. Darkhive is a growing group of U.S. Special Operations veterans, aerospace engineers, robotics perception experts, DevSecOps, defense technology executives, and superb support staff-above all, we are mission first team. We believe that the U.S. and our allies around the world deserve high-quality, affordable tools that keep them safe when each second counts. If you are a free-thinking problem solver who is looking for a highly collaborative and innovative environment, apply with Darkhive today! The Technical Talent Acquisition Specialist Role: The Technical Talent Acquisition Specialist will be responsible for sourcing, screening, and hiring highly skilled personnel at Darkhive, with a main focus in the engineering fields (electrical, mechanical, software, etc). Additionally, this position will assist with acquisition efforts for a variety of roles within our organization such as back office/operational and manufacturing roles. This individual will leverage their industry knowledge, connections and recruiting expertise to build strong relationships with candidates and hiring managers, ensuring a seamless and efficient recruitment process. The Technical Talent Acquisition Specialist in an exempt position reporting to the Sr. Human Resources Manager. This role is hybrid with 2-3 day/week in a San Antonio, Texas office. Some travel to recruiting events may be required. Responsibilities: • Full-Cycle Recruitment: Manage the full recruitment lifecycle, from sourcing and screening to interviewing, and verbal offer negotiation., • Technical Sourcing: Utilize various sourcing strategies, including online platforms, networking events, and industry databases, to identify and attract qualified professionals., • Candidate Relationship Management: Build and maintain strong relationships with candidates, providing a positive and professional candidate experience., • Hiring Manager Collaboration: Partner with hiring managers to understand their specific needs and develop effective recruitment strategies., • Technical Screening: Conduct thorough technical screenings to assess candidates' skills and experience, ensuring alignment with job requirements., • Market Research: Stay up-to-date on industry trends, competitor activity, and talent market conditions to inform recruitment strategies., • Data Analysis: Track and analyze recruitment metrics to identify areas for improvement and optimize the recruitment process., • Compliance: Ensure all recruitment activities comply with applicable laws and regulations., • Employer Branding: Represent the company at industry events and promote our employer brand to attract top talent. Qualifications you bring: • Bachelor’s degree in Engineering, Human Resources, Communication, or related field, • 5+ years of experience in technical recruiting, with a focus on engineering (hardware, electrical, software, etc), • Proven track record of successfully recruiting engineers and office support positions, • Strong understanding of aerospace technologies and industry trends, • Excellent sourcing and networking skills, • Strong interpersonal and communication skills, • Proficiency in using ATS (Paylocity) and other recruitment tools (LinkedIn Recruiter), • Ability to work independently and as a team, • Strong organizational and time management skills, • Ability to multi-task several option positions working in a dynamic environment, • Knowledge of employment laws and government contractor regulations, • Experience recruiting in the drone industry, • Experience recruiting for government contracting and/or security clearance positions, • Professional certification (AIRS), • Ability to sit and/or stand for periods of time., • Ability to use a keyboard, mouse, and other equipment with or without accommodations., • Ability to maintain awareness during business hours., • Ability to lift up to 15 pounds., • Excellent written and verbal communication and good command of the English language., • Learns and memorizes routine tasks., • Reasonable accommodations will be provided to any person with a disability to be able to perform the essential job functions of this position., • Hiring team reviews applications, • 15 – minute pre-screen with Darkhive recruiter, • 30-minute phone screen with the hiring manager, • Take home project, • Comprehensive medical plans; 2 plans are 100% employer paid insurance premiums, • 100% employer paid dental and vision insurance premiums, • Automatic 401k employer contribution with immediate vesting, • Unlimited vacation, • 11 Paid holidays, • 5 days of sick leave, • Stock options, • Welcoming and friendly work environment

Job Description Role : Sr. Network Engineer Location : Stamford, CT (Prefer Local) Duration : 06 Months Plus Visa : USC & GC (As per EC requirement) End Client : Confidential till resume selection Rate : $45 on CTC Key responsibilities include: · Specify high level solution designs, including hardware BoMs, based on business needs and provide detailed OPEX and CAPEX costs. = THEY MUST HAVE*** · Build network infrastructure, test and deploy network changes. · Implement complex network changes within the environment to optimise and improve the network topology focussing on manageability, agility. · Lead on the administration and management of the cable network. · Manage incident and problem resolution across the network, security and WAN infrastructure at all US offices. · Provide third-line support to resolve complex problems. · Conduct detailed analysis of network performance statistics using a variety of tools. · Review and provide technical assurance for low level design and implementation plans created by Third party suppliers. · Prepare low-level network designs and implementation plans for complex solutions with vendor and industry best practices and reference architectures. · Create, maintain and review operational and technical design documentation · Assist with the development of network optimization and capacity plans · Produce implementation scripts, test plans and change controls for all network changes. · Support other technical teams in the implementation of storage, compute and production applications such as Isilon, Avid, and Adobe. Essential skills required: · Network design and administration experience. · CCNP and at least 8 years’ experience in a networking role including high/low level design, implementation and incident/problem management. · Experience with reviewing network design documentation and the ability to use Microsoft Visio. · Experience of working with Cisco router platforms and an understanding of EIGRP, BGP, OSPF and IP multicast. · Experience working with load balancers and firewalls. · Multi-Vendor firewall experience including VPN: Cisco, Sonicwall, Untangle · Experience with designing wireless networks including full pre and post site surveys using industry standard techniques. · Experience with major wireless network vendors including Cisco, Cisco Meraki, Aerohive, Ubiquiti and survey tools such as Ekahau. · Familiarity with network monitoring and management tools - Solarwinds, Orion, Client, BSM Tufin · Cisco routers and switches is essential but experience with Dell and Client is desirable. · Experience working with Data Centers managing cabling infrastructure (copper and fibre), power provision and UPS. · Hands on experience of operational support and hardware implementation. · Experience working in a video post-production environment is desirable. Please Note: o Candidate with valid LinkedIn ID & Genuine references will have a strong chances to get an interview o Please share your resume if above requirement match with you o USC & GC only (as preferred by EC) o Mention your visa status & current location in the email Kind & Regards Mustafa Fouzan Resource Manager linkedin.com/in/mustafafouzan Resource Informatics Group, Inc (RIG) 400 E Royal Ln, Suite 218, Irving, TX 75039 Email: | cell: 972-366-5085|Fax: 972-692-8663 (F) | E-Verified Company Stay Safe Stay Indoors Break the Viral Chain

Job Description Principal RF Design Engineer - SME Communications/Electronic Warfare $10,000 Signing Bonus | Relocation Assistance Provided | Location: Huntsville, Alabama We are seeking a highly experienced Principal RF Design Engineer to serve as a Subject Matter Expert in advanced communications and electronic warfare systems. This role is based in Huntsville, Alabama, and includes relocation assistance along with a $10,000 signing bonus. Position Type: Full-Time | Hybrid Pay Range: $165k - $250k annually with annual bonus potential Why Join Secmation Secmation is a proven, mission-focused engineering company with more than a decade of success delivering real capability to the defense community. We operate with the speed, ownership, and tight-knit culture of a small business-backed by the credibility and track record that comes from 10+ years of successful execution. Here, engineers build systems that matter, move fast, and ship technology that directly impacts national security. Join the future of Electronic Warfare Secmation is hiring a Principal RF Design Engineer that will be responsible for leading the development of complex military communications and electronic warfare. This position requires you to be a Subject Matter Expert in RF and communications design and countermeasure development for mission critical applications. The ideal candidate will be a principal-level, hands-on development engineer with deep expertise in RF design for tactical military communications systems, including SDR, SATCOM or advanced Radar systems. This individual will not only lead technically at the program level but will also be directly involved in the full engineering lifecycle-from initial design through real-world testing, validation, and operational implementation. This position is based in Huntsville, AL, working closely with key defense customers to drive advancements in military communications. In this role, you will lead cutting-edge initiatives that push the boundaries of electronic warfare technology and contribute to mission-critical programs. You will have the opportunity to shape the future of secure, resilient communications for the warfighter, influencing solutions from concept to deployment in support of national security. Key Responsibilities: • Lead the design and development of advanced RF, radar, communications, and EW systems-including receivers, transmitters, front-end architectures, and tactical military communication solutions., • Provide SME-level guidance across Electronic Support, Attack, and Protection (ES/EA/EP), applying deep knowledge of radar, COMINT, SIGINT, and threat modeling to shape system concepts and architectures., • Develop and refine system models, simulations, and signal-processing algorithms in MATLAB/Python, transitioning concepts from analysis to embedded implementation., • Drive systems engineering activities, including requirements development, system architecture, trade studies, and preparation for major design reviews (SRR, PDR, CDR)., • Lead integration and test of RF/EW systems in lab and field environments, developing HWIL approaches, automated test procedures, and resolving complex RF or interoperability issues., • Must have an active DoD Top Secret Clearance, • BS in Electrical Engineering or related discipline, • 15+ years' experience in military RF systems including simulation, system design, software, and implementation of communication systems and EW, • Proficient in the design, implementation, and analysis of military communication systems including adaptive tuning, optimization, and error correction, • Experience in C/C++ for embedded applications, • Experience in Electronic Warfare (EW) system design and applications, • Ability to work in a fast-paced, entrepreneurial environment as part of a small team and execute complex development tasks with limited supervision. Work Environment • Hybrid role with on-site work required in Huntsville, AL., • Core work hours are Monday to Friday, with flexible 9/80 work schedules. Secmation is a proven, high-impact small business with over a decade of mission success-offering technical leaders the rare opportunity to shape both cutting-edge technology and the engineering culture behind it. As part of our leadership team, you'll guide technical strategy, mentor engineers, and help deliver capabilities that redefine what's possible for defense missions. In this role, you'll lead the development of next-generation RF and cyber-integrated systems, bringing together AI-enabled RF analysis, trusted execution, and secure digital-engineering pipelines to build technology where security is designed in from day one. You'll drive architecture and product roadmaps that enable earlier detection of cyber/EW risks, faster adaptation in the field, and a smoother path from concept to deployed capability. Your leadership will directly influence products that change the defense landscape and equip mission operators with smarter, more secure tools. At Secmation, you won't be just another engineer - you'll be part of the core team shaping the future of secure, autonomous, and AI-driven defense systems. Small company. Big mission. Real engineering. Compensation & Benefits • Competitive salary (based on experience and market conditions), • One-time signing bonus, • Relocation assistance, • Company equity, • 9/80 work schedule (every other Friday off), • Paid time off & flexible work schedules, • Comprehensive health, dental, and vision insurance, • Life and disability insurance (short & long-term), • 401(k) retirement benefits plus employer contributions, • And more! About Secmation Secmation is not an IT company - we specialize in AI-driven software solutions, embedded cybersecurity, and secure RF systems for the defense industry. Our mission is to deliver next-generation secure technologies for electronic warfare, autonomous systems, and critical defense applications. Visit to learn more about our work and impact. Equal Opportunity Employer Secmation is proud to be an equal opportunity employer. We are committed to building a diverse and inclusive team. All qualified applicants will be considered for employment without regard to age, race, gender, orientation, identity, religion, or veteran status. U.S. Citizenship is required for this position due to government clearance requirements. The salary range for this position represents a general guideline; however, Secmation considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills, work location, current market conditions, and other bona fide data. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors.

Job Description WHO WE ARE We are a company where people matter. We are family driven. We are financially strong. And we are looking for problem-solvers to join our growing team. BENEFITS • Competitive pay, • Professional development workshops & training, • In-person networking opportunities with leadership and peers, • Hands-on project experience with real business impact, • Paid volunteer time, • Company-sponsored events and activities The Food Business Development Internship at Hydrite offers an opportunity to gain practical, hands-on experience in the food industry while exploring both the technical and business sides of food production. Interns will spend time in food and beverage processing facilities learning about sanitation processes, chemical applications, and customer operations, while also engaging in business development activities such as sales support, lead generation, and relationship building. During this full-time, 10–12 week internship (June–August), you'll spend time both on-site at customer facilities and working alongside Hydrite's business development team What You'll Do: • Shadow Hydrite professionals at food processing plants to learn how our products and sanitation solutions are used in real-world applications., • Join sales calls and customer visits with Business Development Managers to observe and practice relationship-building and technical selling skills., • Assist with product trials, chemical testing, and troubleshooting at customer facilities., • Support the development of business analysis reports, sales presentations, and lead generation projects., • Learn about Hydrite's product portfolio, customer base, and internal business operations., • Analyze data and make recommendations to improve customer processes. What We're Looking For: • Currently pursuing a Bachelor's degree in Food or Dairy Science, Business, Chemistry, Biochemistry, or Chemical Engineering., • Strong communication, interpersonal, and presentation skills., • Proficiency in Microsoft Excel, Word, and PowerPoint. ADDITIONAL BENEFITS • Summer Kick-Off Event: A two-day introduction with plant tours, leadership Q&A, team-building, and networking with interns and co-ops across Hydrite., • LinkedIn: linkedin.com/company/hydrite-chemical-co-, • Facebook: facebook.com/hydrite Privacy Notice for California Residents:

Job DescriptionJob Title: Commissioning Technician - Abilene, TX Job Description Join a dynamic team to support capital projects and implement solutions that drive critical changes and improve performance for clients. Work individually and collaboratively to achieve client goals with precision and efficiency. Responsibilities • Coordinate operations technicians' work schedules and manpower forecasts., • Manage and track commissioning constraints and deficiencies related to schedule or quality of Basebuild utility systems post-construction installation., • Integrate construction and design schedules with commissioning activities., • Provide reports and updates on schedule and quality metrics., • Conduct system and facility engineering job walk assessments., • Troubleshoot and perform root cause failure analysis on assigned projects., • Train suppliers in the commissioning software systems of the owner., • Provide and manage access for suppliers in the owner's commissioning software systems., • 2+ years of experience in commissioning or construction for I&C or Electrical Basebuild systems in the Advanced Technology sector., • Experience with Rockwell Automation, PLC5, and Control Logix hardware and software., • Experience with multi-discipline large capital projects involving Owners, General Contractors, Contractors, and System Integrators., • Good understanding of Design/Build (Engineering and Construction)., • Knowledge of complex process systems architecture and design, Instrumentation, Device Selection, Networking, PLC & I/O architectures, P&IDs, data sheets, and SCADA., • Proficiency in control systems programming and configuration., • Strong understanding of HVAC, electrical, and building automation systems., • Ability to read and interpret technical drawings and schematics., • Familiarity with various control system platforms; BMS or SCADA is a plus., • Experience conducting I/O checkouts., • Excellent problem-solving and analytical skills., • Strong communication and teamwork abilities., • Attention to detail and a proactive approach to work., • A bachelor's degree in electrical, mechanical, chemical engineering, or a similar technical field is preferred., • An associate's degree or technical certification in electrical, mechanical, or control systems engineering or a related field is acceptable. Direct experience will be considered in lieu of a degree. This role requires onsite work in Abilene with a 50-hour work week. Per diem is included. The team is recognized as industry leaders, offering opportunities for growth and participation in industry events. The work environment involves collaborating with seasoned leaders, technical specialists, and subject matter experts to deliver high-quality solutions consistently and accurately. Job Type & Location This is a Contract position based out of Abilene, Texas. Job Type & Location This is a Contract position based out of San Antonio, TX. Pay and Benefits The pay range for this position is $32.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Antonio,TX. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Title: Supply Chain Manager Department: Operations / Supply Chain Reports To: VP of Finance Location: San Antonio, Texas Employment Type: Full-Time Job Summary The Supply Chain Manager is responsible for leading and optimizing the company’s supply chain functions with a primary focus on procurement, supplier management, inventory control, demand planning, and cost optimization. This role ensures continuity of supply, effective vendor performance, accurate forecasting, and strong financial discipline while supporting the company’s growth and operational objectives. Key Responsibilities • Develop and execute strategic supply chain plans that improve efficiency, reduce costs, and support business growth., • Lead procurement activities, including supplier selection, contract negotiation, pricing agreements, and ongoing vendor management., • Establish and monitor key supply chain KPIs, including cost performance, inventory turns, supplier reliability, and service levels., • Identify supply chain risks and implement mitigation strategies to ensure continuity of supply., • Manage inventory levels, demand forecasting, material planning, and replenishment strategies to ensure availability while minimizing excess and obsolescence., • Collaborate cross-functionally with manufacturing, engineering, production, sales, and finance to align supply plans with business demand and financial goals., • Own and maintain supply chain data integrity within ERP systems (NetSuite), including item setup, BOMs, vendor records, and planning parameters., • Drive continuous improvement initiatives across procurement and inventory processes., • Build and maintain strong relationships with suppliers and internal stakeholders., • Ensure compliance with company policies, contractual obligations, and applicable regulatory requirements., • Bachelor’s degree in Supply Chain Management, Business Administration, Operations Management, or related field; Master’s degree preferred., • 7+ years of experience in supply chain, procurement, or inventory management roles, with at least 2 years in a managerial or lead capacity., • Strong analytical, problem-solving, and decision-making skills., • Demonstrated experience managing suppliers, contracts, and cost-reduction initiatives., • Proficiency with ERP systems, preferably NetSuite, and strong Excel and data analysis skills., • Excellent leadership, communication, and negotiation abilities., • Strategic supply chain and procurement planning, • Inventory optimization and demand forecasting, • Cost management and financial discipline, • Supplier relationship and performance management, • Process improvement and change management, • In-office with occasional off-site meetings or supplier visits., • Competitive base salary with eligibility for an annual performance-based bonus, • Health, dental, and vision insurance, • Flexible paid time off