Electrical jobs in Cherry Hill, New Jersey - Page 6Create job alerts

Job DescriptionDescription: As a Engineer Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job DescriptionJob Summary Headquartered in Charlottesville, Virginia, Sun Tribe is one of the fastest growing clean energy companies in the Mid-Atlantic United States. Thanks to an experienced, in-house team of engineers, analysts, technicians and electricians, Sun Tribe O&M is able to provide best-in-class technical asset management and operations & maintenance ("O&M") services for our client-partners across a growing portfolio of over 100 operational sites throughout the region. The Operations & Maintenance (O&M) Manager will be responsible for managing the daily operations for a team of O&M Technicians and Electricians as well as occasionally supervising subcontractor partners. This position requires a variety of skills to manage aspects of solar PV system O&M, including preventative maintenance, troubleshooting, corrective repairs, and special projects. The O&M Manager reports directly to the Director of Operations and Maintenance and supervises a team of field technicians and electricians. It is expected that this position will require approximately 20% office work and 80% field work (day travel). ResponsibilitiesRelationship Management * Fosters positive working relationships with all internal and external stakeholders including project teams, asset owners, client partners, facility hosts, subcontractors and equipment manufacturer representatives. * Fosters a sense of trust and reliability on behalf of all asset owners and/or owner representatives by providing timely and accurate communication about site issues. * Proactively engages in communication with site hosts and provides appropriate lead time for site visits as required. Team Management * Supervises a team of O&M Technicians and Electricians to accomplish assigned Work Orders. * Completes detailed scheduling, planning and assignment of Work Orders. * Coordinates service visits with site host representatives to obtain building access and minimize the impact to the facility staff. * Ensures all field personnel have the appropriate understanding of scope, tools, materials, and equipment to complete assigned tasks. * Ensures team members have all standard materials and spare parts. * Promotes adherence to all safety plans, guidelines, and site requirements. * Identifies safety hazards and recommends appropriate controls for upcoming Work Orders. * Reviews service reports submitted by team members for completeness and quality assurance. * Periodically inspects work vehicles and tools for cleanliness and operability. * Provides continuous support for all direct reports by setting clear performance goals and creating detailed plans in support of those goals. Troubleshooting & System Maintenance * Assists in the collection of key project information to include drawing sets, equipment manuals, specification sheets and commissioning documents for new sites. * Supports regularly scheduled calls with asset owner partners and provides updates on operational status, site issues, risks, outages and pending resolutions as needed. * Completes preventative maintenance inspections (PMIs) in according to the O&M agreement. * Recommends corrective maintenance and facilitates the completion of repairs and/or system upgrades as approved by asset owner. * Troubleshoots system outages, faults, or other abnormal conditions, either remotely or on site, and formulates a recommendation for corrective actions. * Periodically oversees subcontractors utilized to perform assessments, inspections, corrective maintenance, or other specific scopes of work. * Facilitates warranty equipment replacements and submits claims for reimbursement from OEM. Basic Qualifications Required * Degree required: Associate’s Degree or comparable years of experience is required * A minimum of five years’ experience installing, troubleshooting, and/or maintaining commercial or utility-scale solar PV equipment is required Skills & Experience Preferred * Demonstrate company core values * Advanced knowledge of electrical principles, maintenance procedures and documentation * Experience with the National Electric Code as it pertains to solar PV system design * Experience in leading small teams in industrial settings * Strong computer skills * Honest, reliable, self-aware and conscientious * Strong interpersonal communication skills, both verbal and written * Strong planning, organization and prioritization skills * Electrical license preferred * NABCEP PV Installation Professional, PV Inspector, and/or PV Commissioning & Maintenance Specialist Certification preferred * Valid driver’s license required Working Conditions * Some evening and weekend work is required * Must be on-call to address delays, emergencies, bad weather, and other issues at the jobsite * Requires approximately 20% office work and 80% field work (day travel) Physical Requirements * Must be able to traverse and inspect all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching * Must be able to lift up to 40 pounds at a time * Require travel to worksites and projects as needed * Exposure to characteristic construction site dangers Direct Reports * O&M Technician * O&M Electrician Salary and Benefits This position is considered Full-Time Salaried, Nonexempt under the federal and state wage and hour laws which means that you will be eligible for overtime time pay for hours worked in excess of 40 in a given workweek. Sun Tribe offers all full-time employees: * Health insurance (medical, dental, and vision) * Life insurance * 15 company holidays, similar to Virginia State holiday schedule * Paid maternity/paternity leave * Paid Time Off * 401(k) with 4% employer match * Discretionary Bonus Potential * $600 annual health & wellness reimbursement How to Apply Please submit your resume and relevant project experience via our application portal. Applications are reviewed on a rolling basis. Even if you do not meet every listed qualification, we encourage you to apply. We prioritize talent, passion, and drive over what looks good on paper. If you're on the fence, we encourage you to hit the apply button and highlight what draws you to Sun Tribe. Sun Tribe is an equal opportunity employer and does not discriminate against any applicant or employee on the basis of age, color, disability, gender identity or expression, family medical or genetic information, marital status, national or ethnic origin, political affiliation, pregnancy (including childbirth and related conditions), race, religion, sex, sexual orientation, or status as a covered veteran in accordance with applicable federal, state, and local laws. Sun Tribe complies with applicable state and local laws governing nondiscrimination in employment in every location in which the Sun Tribe operates. This policy applies to all terms and conditions of employment, including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Sun Tribe O&M is a drug-free workplace. Offers of employment are contingent upon successful completion of a background check, drug screening, and employment eligibility verification through E-Verify. Read more about our company values and about Sun Tribe O&M at Sun Tribe participates in E-Verify. Powered by JazzHR QlAODQGo53

Job DescriptionSalary: Critical Mass Consulting, LLC is seeking individuals who want to learn and develop within a dynamic, start-up environment. We believe in our purpose:To develop a company which thrives on connectivity and engagement; to build a premier consulting organization, which rewards creativity, contribution, and growth. Critical Mass Consulting, LLC is supporting Life Sciences clients in the areas of: • Project Management, • Equipment, Utility and Facility Start-Up and Commissioning/Qualification, • Validation Program Development, • Computerized System Validation (CSV) Our company places an emphasis on continuous personal development. This includes support/financing of technical training, mentorship, and development of high performance teams. Job Description: Critical Mass Consulting, LLC is recruiting a Senior Process Engineer supporting Life Sciences clients in Philadelphia, PA. If you have a passion for Life Sciences and helping others, we are interested in discussing our company, our process and what it means to join our team-focused organization. This role requires full on-site support in the Philadelphia area, ensuring timely engagement, responsiveness, and hands-on leadership for manufacturing operations, qualifications, and tech transfer activities. • Lead and support high-paced Tech Transfer/process engineering of the Drug Product (DP) manufacturing unit operations, including but not limited to: Component sterilization, mixing, Sterile filtration, Aseptic filling, Inspection and testing, • Generation and review of Validation Master Plan documentation (URS, FRS, Design Qualification) for standard equipment and custom-built systems, • FAT/SAT, IOQ/PQ execution and oversight, • Support system receipt verifications, automation loop testing, equipment startup, facility and utilities readiness, and mechanical completion activities, ensuring proper commissioning, testing, and hand-over to end users, • Serve as the technical representative of the process engineering team, supporting project manager(s) and providing on-site expertise during critical phases of execution., • Conduct a thorough review of P&ID and electrical schematics and perform walk-downs, identify gaps or issues, and drive collaborative resolution in a timely and compliant manner, • Provide on-the-floor troubleshooting and SME level support for systems and processes, ensuring timely resolution of issues through collaboration with internal teams, vendors, and external stakeholders., • Review and verify the accuracy of Turnover Packages (TOPs) in alignment with approved SOPs and cGMP requirements., • Track and document issues in an organized, transparent manner to provide visibility to project stakeholders and drive timely closure., • Work independently while maintaining constant collaboration with cross-functional teams, ensuring smooth project execution and technical alignment., • Manage and oversee document workflows within paperless validation/documentation systems. Experience with VEEVA or Master control, paperless validation systems such as Kneat or ValGenesis is a strong plus., • Provide mentorship and training to junior engineers, sharing technical expertise, best practices, and guidance to strengthen team capabilities and ensure consistent project execution standards. Project Management Responsibilities General Consulting Responsibilities • Build and maintain strong, trust-based relationships with clients, acting as a reliable SME and strategic partner throughout project execution., • Demonstrate dynamic problem-solving and critical thinking skills to provide clients with practical, risk-based solutions that balance compliance, efficiency, and innovation. Required Qualifications • Belief in our Core Values. These 4 values provide the foundation for how we operate as a company. With these common shared values, we can effectively accomplish our mission of organizational excellence., • People Come First, • We Build Together, • Empowering Growth and Leading People to Make a Difference, • Joy and Discipline, Life in Balance, • Strong interest in Life Sciences and a passion for helping others, • Excellent written and verbal communication skills, emphasizing strong technicalwriting skills

Job Description Miller-Remick, a full-service MEP engineering firm, is looking for an energetic, self-motivated, and innovative individual for a Senior Electrical Engineer position. In addition to the basic qualifications listed, the successful candidate shall possess the skills required to successfully develop and execute project tasks and deliverables, be a collaborative team player, handle multiple complex tasks, establish and manage priorities, and have a strong drive to deliver a quality project for customers. Our clients include federal agencies (Dept. of Veteran Affairs, Dept. of Defense, GSA, Federal Bureau of Prisons, state, and local governments). Projects have varied degrees of complexity and a wide range of estimated construction costs and include hospitals and healthcare, military bases, federal buildings and courthouses, state and local government buildings, research laboratories, central steam and chilled water plants, corrections facilities and site utility infrastructure projects. Responsibilities: We are looking for a Senior Electrical Engineer for the planning and coordination of multi-discipline project teams. Candidate must be a quality-oriented individual to perform electrical engineering investigations/assessments of facilities, design building electrical systems, specification preparation, project and construction cost estimates, project scheduling for engineering projects. Qualifications: • Bachelor (BS) or Master (MS) in Engineering, • P.E. license with 8 years’ experience in electrical engineering, • Knowledge of all applicable Codes, • Experience with power, lighting, security, telecom systems, emergency generator design, • Building Information Modeling using REVIT, • Medium voltage experience is a plus, • Leadership qualities are a must Miller-Remick has a history of success leading project teams, encompassing a full array of sub-consultants, including architects and other design trades. We provide engineering, design and construction services as the Prime on highly complex projects for federal, state and local government clients. We have developed the expert personnel, management tools and service-oriented work ethic required to service clients in the following markets: healthcare, government, energy/power, institutional, and infrastructure.Miller-Remick is a Service-Disabled Veteran Owned Small Business that is fully staffed with Project Management and Engineering professionals specializing in Mechanical, Electrical, Structural, HVAC, Plumbing, Fire Protection, Piping, Process, and Controls. Our full-service team brings the experience necessary to deliver industry-leading solutions to our clients.\r\n \r\nMiller-Remick has a history of success leading project teams, encompassing a full array of sub-consultants, including architects and other design trades. We provide engineering, design and construction services as the Prime on highly complex projects for federal, state and local government clients. We have developed the expert personnel, management tools and service-oriented work ethic required to service clients in the following markets: healthcare, government, energy/power, institutional, and infrastructure.

NDI Engineering Company is seeking an Electrical Engineer to join our team in the DDG51 Turbine Power Test Facility at the Philadelphia Navy Yard \n The ideal candidate will have experience in design of Naval Ship Hull, Mechanical and Electrical (HM&E) systems or power plant systems; have experience supporting design projects, particularly in AutoCAD; have experience applying the NEC; demonstrate an attention to details; and, possess strong communication skills. \n Job Responsibilities \n\n • Configuring equipment\n, • Reviewing procedures and test plans\n, • Performing computer based testing and simulation\n, • Hot plant testing\n, • Must be a U.S. Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance.\n, • Must possess a Bachelor of Science in Electrical Engineering degree. \n, • Must have two (2) years’ experience in engineering systems as related to the area of design and modifications of steam and diesel driven electrical power generation systems and equipment.\n, • Must have experience using Microsoft Office and Outlook. \n

Job Description CRM Residential has been a trusted name in the property management industry for over 46 years specializing in affordable housing. Our success story is a testament to the dedicated and talented individuals who have chosen to build their careers with us. We take great pride in our values, and we live and breathe them every day. Working at CRM Residential is so much more than a job, it is a career with purpose. No matter what department or level of the company you join, our mission is to provide a comfortable and reliable home environment for those who need it most and to provide excellent service to our customers. You will make a difference. Why Join the CRM Residential Team: • Comprehensive Health Coverage, • Retirement Savings with employer contribution, • Bonus Potential, • Paid Time Off (PTO), • Company Paid Holidays The Maintenance Supervisor will receive general supervision and direction from the Community Manager. The Maintenance Supervisor will comply with established policies and procedures and not take action contrary to such guidelines without the Community Manager’s approval. The Maintenance Supervisor will be responsible for but not limited to: • Responsible for the implementation and close supervision of the preventive maintenance system, to insure preservation and upkeep of all buildings and equipment, property housekeeping, completion of resident maintenance requests, prompt vacancy preparation for re-rental and for the employment and training of qualified and competent Maintenance Technicians, when necessary, • Provide continuous coverage for emergency situations and coordinate all periods of absence from the property with the Community Manager, • Inspect buildings and grounds, noting deficiencies of any equipment and or machinery and any such deficiencies and or deferred maintenance will be communicated to the Community Manager, • Supervise all Maintenance Technicians and other employees in the maintenance department, providing direction and guidance, • Ensure the prompt and proper completion of all repairs and work orders and follow- up by completing the work order on the master work order log, • Inspect the grounds and public areas on a regular basis to verify employees are performing their assigned duties in maintaining adequate property cleanliness and upkeep of all public areas and grounds, • Periodically reviews maintenance staff performance, informs staff of policies and procedures and schedules training programs, as needed, • Responsible for control, operation and organization of the maintenance shop, including all mechanical equipment and the project vehicle, • Purchase supplies, with the approval of the Community Manager, such as small tools and low-cost equipment utilizing purchase orders and competitive pricing as indicated in the Purchasing and Bill Approval Manual, • Maintain inventory for supplies and equipment in the maintenance shop, • Responsible for maintaining the project vehicle and monitoring daily mileage, • Responsible to appear in court on behalf of the owner, when required, • Assist Community Manager in the preparation of the annual budget and the Operating and Business Plan, • Prepare bid specifications and obtain competitive bids in accordance with Community Realty Management’s Contract Supervision Manual, • Assist Community Manager with various inspections such as REAC, management reviews, annual unit inspections and local inspections and following through to make sure work orders are written and work gets completed in a timely manner, • Responsible for completion of any and all incident reports within 24 hours of occurrence (i.e. injuries, property damage, disturbances, etc.), • Assist Community Manager and or Assistant Community Manager in the orientation of new residents regarding the proper usage for the garbage disposal and appliances, • Responsible for maintaining control and security of apartment keys, • Communicate with the office if any resident or guest is conducting illegal activities in their apartment or on the premises of the property, • Responsible for the proper completion of the Observation Checklists during visits of the exterminators and supervision of extermination procedures, • Assist Community Manager in the bid tabulation for hiring contractors and supervision of all contractors while on the property, • High School diploma or equivalent education required. 3-4 years of experience can offset minimum educational requirements for this position, • 3-4 years of experience as a Maintenance Supervisor, preferably in property maintenance, • Experience working with boilers or appliance repair/diagnostics is preferred, • The position requires effective oral and written communication skills, • Maintains current license/certificate and/or specialized skills in at least one (or more) of the following building trades: electrical, plumbing, carpentry, HVAC, fire protection or mechanical., • Valid driver's license and reliable transportation, • Must be available to be on-call for nights and weekends as required by the property, • Must possess a general understanding of OSHA, fire prevention and safety regulations, • Schedule: Full Time 8am-5pm Monday-Friday, on call is required, • Strong knowledge of maintenance procedures and techniques, • Indoor/outdoor environment subject to changing conditions and temperatures exceeding 90 degrees at times., • Ability to lift 55 pounds independently and support team lift with reasonable accommodations., • This job involves walking and standing for long periods as well as stooping, squatting, lifting, carrying, pushing and climbing. Working on ladders at varying heights. CRM Residential is an award-winning full-service property management company which professionally manages 11,000+ apartments valued in excess of one billion. We are exclusively third-party so there is no conflict of interest between the properties that we manage for our clients and our own properties, because we do not own any properties. Our focus is dedicated to our clients. We are an equal opportunity employer and welcome applicants from all backgrounds to apply. If you have a passion for property maintenance and a desire to work for a reputable company, we encourage you to apply for this exciting opportunity. Powered by JazzHR mEdUo7QWkp

Job Description Automotive Service Supervisor 2nd Shift (Additional Compensation for 2nd Shift) - Lease & Rental Bentley Truck Services, Inc. | About Us Bentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we have grown to 8 locations expanding to 4 states on the east coast, offering commercial truck sales, commercial truck rentals, full-service leasing, contract maintenance, parts, and service. We continue to work every day towards our philosophy of being Committed to Excellence. If you have passion and are committed to success, we want you on our Team! We offer in-house and dealership training programs that boost technicians’ skills providing excellent potential for growth.. If you have fleet or dealership experience, please apply - we'd love to speak with you! We work with Hino, Isuzu, Cummins and Freightliner trucks from Medium to Heavy-Duty. Benefits · Sick/PTO · Paid Holidays · Competitive Wage · Generous 401k match. · Medical, Dental, Vision · Employee Referral Bonus · Quarterly Tool Allowance · Company Paid Life Insurance · Supplemental Life, LTD, STD, etc. Automotive Service Supervisor Job Summary Opportunity to use exceptional skills and knowledge to support overall business goals while mentoring and developing other technicians. Will work closely with management team to provide insight on overall shop operations. Automotive Service Supervisor Responsibilities • Diagnose mechanical, electrical, hydraulic issues., • Work with management team to help assign proper techs to complete tasks., • Participate and complete Manufacturing training to obtain certifications., • Help assure staff is working safely, accurately, and efficiently., • Provide input on Technicians development., • Perform repairs as needed., • Mentor technicians to provide guidance to enhance their overall development., • Update customers to status of repairs and maintenance. Automotive Service Supervisor Knowledge, Skills, and Abilities This candidate should have the ability to: • Work on trucks, climbing into and out of, crawling under to make repairs., • Work on emissions systems, • Demonstrate decent wiring knowledge, • Work safely and promote safety in the workplace., • Teach less seasoned technicians., • Stand for long periods., • Use PC to update work order status and explain maintenance and repairs., • Maintain quality work orders and checklists., • Explain verbally and written form the status of work orders., • Keep management aware of any concerns on floor., • Strong mechanical, electrical experience., • Refrigeration unit experience a plus., • CDL B, or willingness to obtain, a plus (we will assist)., • State Inspection License, a plus, • ASE Certifications, preferred. Our goal would be to have this individual fully certified. Bentley Truck Services is an Equal Opportunity Employer This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Bentley Truck Services.

Job Description Sigma Defense is seeking a multi-faceted Senior Software Engineer to design, develop, test, deploy, maintain, and improve software systems. In addition, the Senior Software Engineer will manage project priorities, deadlines, and deliverables. They will provide support on various projects, so the ability to adapt and prioritize projects is essential. The senior engineer will be an integral and important part of the team and the projects they will support. The ideal candidate is capable of working independently or collaboratively on complex software solutions that satisfy project goals and customer needs. This includes both software development and integrating software with system hardware to provide needed capabilities and features. The ideal candidate's ability to learn about and apply radar principles is a key factor in successfully meeting our customer commitments. Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Requirements • 6-8 years of related software development experience., • Experience working with Embedded and or Real Time systems, specifically DoD sensor equipment., • Experience working in Linux and Windows environments., • Experience integrating software and hardware real-time systems., • Experience developing, integrating, and testing Radar Systems is preferred., • Experience with object-oriented design and multi-threading/multi-processing is preferred., • Strong mathematical background., • Strong analytical skills., • Experience working with the following is preferred: QT Creator, Visual Studio, Git, GitLab, GitHub, Google Test, CxxTest, xUnit, CMake., • Experience with C/C++, Linux, Windows, and C#., • Candidate must possess or have the ability to obtain an active Secret security clearance or higher., • Bachelor’s degree from an accredited college or university in Software Engineering, Computer Science, Computer Engineering, Electrical Engineering, or related field of study., • Due to the nature of the work, all activity is 100% onsite., • Design, develop, test, deploy, maintain, and improve software systems for advanced radar and threat simulator systems., • Ensure the software meets the high standards required for DoD and other U.S. Government agencies., • Manage project priorities, deadlines, and deliverables., • Effectively balance multiple projects and adapt to changing priorities to meet project goals and timelines., • Integrate hardware and software components, ensuring seamless operation of the overall system., • Collaborate with cross-functional teams to achieve system integration goals., • Maintain existing software systems by identifying areas for improvement, troubleshooting issues, and implementing solutions to enhance performance and reliability., • Provide support on various projects, working closely with other engineers, project managers, and stakeholders to ensure project success., • Foster a collaborative environment that encourages innovation and knowledge sharing., • Create and maintain comprehensive documentation for software systems ensuring compliance with DoD standards and regulations., • Stay current with emerging technologies and industry best practices., • Pursue continuous learning opportunities to enhance technical skills and knowledge, and apply new insights to improve software systems. Benefits • Dental and Vision Insurance, • Medical Insurance to Include HSA, FSA, and DFSA Plans, • Life and AD&D coverage, • Employee Assistance Program (EAP), • 401(k) Plan with Company Matching Contributions, • 160 Hours of Paid Time Off (PTO), • 12 (Floating) Holidays, • Educational Assistance, • Highly Competitive Salary

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job DescriptionASR International Corp has an opening for a System Administrator II for work in the Philadelphia area. The System Administrator provides IT support Services to include asset lifecycle support; Standard Operating Procedures development support, data call support; inventory support; subject matter expertise support, peripheral device support, account access tracking and support. Qualifications: • Bachelor’s Degree in Electrical/Electronic/Computer Engineering, Computer Science, or Information Systems, • Navy system administration/IT experience is preferred, • Knowledge/familiarity of Risk Management Framework (RMF) is highly desired., • CCNA Security, CySA+ **, GIC SP, G SEC, Security + CE, SSCP Security + CE, SSCP certifications are required upon task order deployment. ASR provides world-wide Management and Technical Support Services to Government agencies and Fortune 500 customers. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide. Benefits Hired applicants may be eligible for benefits, including but not limited to, an excellent compensation package and comprehensive benefits package which include a flexible work schedule, Paid Holidays, Paid Time Off and Sick Days, Health Insurance (medical, dental and vision); and a 401(k) plan. The salary range provided for this role is a good faith estimate representative of all experience levels. ASR considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. This job description is intended to describe the general nature and level of work performed by people assigned to this job description. The job description is not intended to be an exhaustive list of responsibilities, duties and skills required for this position. Please note that your resume and candidacy may be subject to customer approval, acceptance and clearing of the required background check and successfully obtaining and maintaining any required security clearances, if any. ASR is committed to the policy of equal employment opportunity. In order to provide equal employment and advancement opportunities to all individuals, employment and promotion decisions at ASR are based on merit, qualifications, and abilities. ASR’s hiring and employment practices are not influenced or affected by an applicant’s or employee’s race, color, religion, sex, national origin, age, veteran status, marital status, ancestry, ethnicity, physical or mental handicap / disability which is unrelated to job performance, sexual orientation or any other characteristic / classification protected by law. Powered by JazzHR bWml5tFtQQ

Job DescriptionJoin Us as an Automation Controls Specialist Welcome to a role where every day brings new challenges and opportunities to hone your expertise. As an Automation Controls Specialist, you'll find yourself deeply engaged in maintaining, troubleshooting, and enhancing an array of intricate systems. Your Daily Adventures: • Be the expert in break-fix and preventive maintenance for mechanical and electrical equipment enhancements, confidently tackling even the most complex systems., • Program, troubleshoot, and dissect complicated control systems, using your sharp expertise to resolve intricate software/hardware issues., • Analyze results from predictive tools like infrared thermography and vibration analysis to proactively address maintenance., • Spearhead Continuous Improvement (CI) initiatives and create impact through cost savings and innovative solutions., • Find and suggest alternative parts and solutions to consistently boost reliability., • Masterfully perform maintenance tasks, upholding industry standards with pride. Skills We Support You With:, • A high school diploma with technical prowess or an associate degree enriched with hands-on industry experience., • Mastery in predictive technologies and in-depth understanding of electrical and mechanical systems., • An independent spirit, with the drive to train others and manage projects when required.

Job Description TOOL & DIE SUPERVISOR The Tool and Die Supervisor is a critical leadership role within the manufacturing environment, responsible for overseeing the design, production, maintenance, and repair of precision tools, dies, jigs, and fixtures used in mass production. This position combines advanced technical expertise in machining and metal forming with strong leadership and organizational skills to ensure high-quality, efficient, and safe manufacturing operations. Qualifications and Education Requirements: • Diploma or certification in Machining, Tool and Die Making, Manufacturing Technology, or a related field (required), • Minimum 5–7 years of experience in tool and die making or machining, including at least 2 years in a supervisory or leadership role, • Proficiency with CNC programming and operation preferred, • Supervision & Coordination, • Supervise, coordinate, and schedule the activities of tool and die makers, machinists, metal formers, and related personnel., • Establish work methods and schedules to meet production and quality objectives., • Coordinate workflow and resource allocation across departments to optimize efficiency., • Supervise, train, and mentor apprentices, machine operators, helpers, and laborers., • Production Oversight, • Oversee the design, fabrication, maintenance, and repair of precision tools, dies, and fixtures., • Set up machines and equipment, and program CNC machine tools as required., • Ensure that all production meets dimensional and quality specifications., • Requisition materials and supplies needed for production activities., • Process Improvement & Problem Solving, • Resolve work problems and recommend measures to improve productivity and quality., • Collaborate with engineering, quality control, and production teams to address manufacturing challenges and implement process improvements., • Participate in continuous improvement initiatives to reduce downtime and enhance cost efficiency., • Safety & Compliance, • Enforce adherence to safety standards and ensure a safe working environment., • Ensure compliance with organizational, industry, and regulatory safety practices., • Maintain records and prepare production and safety reports as required. #libertyjobs #midsenior #director #CNC Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description My client is a well known MEP Consulting Engineering firm who has been around for decades. They are seeking an Electrical Engineer with 5+ years of Electrical Design and is knowledgeable in critical facilities engineering. My client does work in the Data Center, hospital/healthcare and electrical infrastructure markets. Experience with Generators, UPS systems, and switchgear design a major plus! REVIT is preferred. #midsenior #CIVILMEP #ConsultingEngineer #Hospital #DataCenter #Electrical #Libertyjobs Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description My client is a top notch MEP Consulting Engineering firm actively seeking a Mechanical Engineer with HVAC design and engineering expertise. Autocad and REVIT a plus! EIT or PE a plus! Your consulting engineering ability is what my client seeks! HVAC and Mechanical aptitude. #midsenior #Libertyjobs #CIVILMEP #ConsultingEngineer #HVAC Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Electrical Engineer Position Summary: The Electrical Engineer will provide electrical engineering support to the Land Based Engineering Test Site (LBETS) for the US Navy. Clearance Required: • Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance\n\nEssential Functions and Responsibilities:, • Provide engineering/technical support for concept studies; feasibility studies; preliminary design activities; contract design activities; detail design and construction activities; independent design reviews; In-service ship design and engineering activities; shipboard installation support; and special studies related to ships/boats/craft, ship systems and/or shipboard equipment., • Conduct reliability, maintainability, availability, transportability, hazard, environmental, occupational health, safety, risk analyses, and other system engineering analyses. The Contractor shall provide reports, plans, and other substantiating documentation as required., • Facilitate and provide required technical information expertise to Integrated Process Teams (IPTs), special advisory boards, off-sites, working groups and audit teams. The Contractor shall perform research and work along with NSWCPD, Fincantieri Marinette Marine, PMS515 and other key stakeholders. ., • Provide support in the development, analysis, testing and certification of materials and their application., • Review, maintain and make recommendations with regard to engineering plans, annual reports, program records, technical manuals, design histories, design configurations, databases, regulatory body and other documents., • Support ongoing ship Detail Design requirements, including the review of shipbuilder's products and deliverables in accordance with Government requirements including MIL-STD, MIL-Specs, Ship design specs and NSTM, and the preparation of analyses and recommendations for decisions to the Program Office., • Knowledge in engineering theories, concepts, principles, standards in order to conceive or apply new applications/developments to resolve Client problems/conditions for advanced technologies for LBT/ES systems engineering and engineering resources\n\nRequired Education, Skills, and Experience:, • Bachelors of Science in Electrical or Electronic Engineering, • 3+ years required, • Understanding of electrical engineering codes and safety standards\n\nPreferred Skills and Experience:, • Knowledge of project management processes, • Familiarity of Navy procedures and policies (DoD 5000 acquisition processes), • Familiarity of ship operations and/or shipboard testing, • Hands-on experience using design and calculation software, • Ability to run model based simulations and analyze test data against simulation results, • Knowledge of the Navy's organizational structure/inter-relationships, • Have familiarity with electrical control systems, • Familiarity with Navy Shipboard Electric Plant Architecture and Power Generation, Regulation, Protection and Distribution System.\n\nPhysical Demands and Expectations:, • Regular physical activity to include walking, climbing stairs, bending, stooping, reaching, lifting (up to 30 pounds), and standing; occasional prolonged sitting\nThis position description represents a summary of the major components and requirements of the outlined job. Other duties and responsibilities may be assigned or required as business needs dictate. Questions regarding this description should immediately be addressed to the department manager or to Human Resources. LIFE CYCLE ENGINEERING Life Cycle Engineering (LCE) is a privately held, employee-owned company with an emphasis on "doing the right thing the right way", which applies to the way we treat our customers and employees. We are proud to have been recognized as a "Best Place to Work" for 17 years running! Learn more below and at . Mission Our mission is to enable people and organizations to achieve their full potential. As a professional services organization, our mission is focused on our clients' people and organizations. It is our company's cornerstone belief that we will not lead the industry in assisting our clients unless we excel at helping our own people and teams reach their full potential. Culture Our corporate culture encourages personal and professional growth because LCE's success depends on the talent, innovation, professionalism, and commitment of its employees. LCE is a strengths-based organization focused on turning individual talents into strengths and then turning individual strengths into organizational performance that supports our clients' success. Benefits • Affordable Medical/Dental/Vision Plans for employees and their families, • Free Employee Life and Disability Insurance, with supplemental coverage options available, • Health Savings Account and Flexible Savings Account options, • Company matched 401(k) & company-funded Employee Stock Ownership Program (ESOP), • Paid Vacation, Holiday, Sick Leave, • Continuing Education and Professional Development programs at all levels, • Flexible Schedules and Relaxed Dress Code, • Employer-sponsored events, social collaboration, and open communication, • Free access to an extensive online training library, including certification prep Life Cycle Engineering (LCE) shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that LCE take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, because of or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation, and any other status protected by applicable state law. In addition, LCE will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant. LCE shall also abide by the requirements of 29 CFR Part 471, Appendix A.

Job Description Springboard Automation is the leading provider of luxury home technology to families in the Greater Philadelphia Area. As we expand to new cities, we're seeking a Field Installation Technician with a strong background in hands-on work like construction, carpentry, or electrical installations, coupled with technical know-how in home automation. In this role, you will be actively installing and maintaining cutting-edge home technology systems for high-end clients, making this job perfect for someone who enjoys both physical, manual labor and solving complex technical challenges. You’ll be part of a dynamic team that works in a variety of residential settings, where each day brings new challenges and opportunities for hands-on work. Experience & Qualifications: • Minimum 2 years of physical installation experience with A/V equipment, TVs, speakers, networking equipment, and motorized shades., • Experience with low-voltage wiring and cable management., • Proven experience in programming A/V systems and solving installation challenges on-site., • Experience in construction, carpentry, or electrical work is a plus., • Knowledge of Lutron, Savant, Sonos, and Wifi networks is a bonus., • Comfortable working in physically demanding environments, including the ability to:, • Lift up to 50 pounds., • Climb ladders up to 12 feet., • Bend, kneel, and perform manual labor for extended periods., • Available to travel and work at diverse job sites nationwide., • Strong customer service mindset with excellent communication skills., • Valid driver’s license required.Day-to-Day Duties & Responsibilities:, • Physically install TVs, speakers, motorized shades, and other A/V equipment., • Perform A/V rack builds with precision and attention to detail., • Conduct low-voltage wiring and other electrical tasks., • Troubleshoot and resolve technical issues during installation., • Communicate with clients and builders to ensure the highest quality of service. In every aspect of our work, we strive to embody our core values: • Go Above and Beyond to exceed expectations, • Own the Problem with empowered resolution, • Say it Positive by maintaining optimism in all situations, • Be a Trusted Resource to guide clients to the best solutions Pay Range: $26-$39 per hour dependent on experience and additional factors. This is an hourly, non-exempt role. Powered by JazzHR 38J3PE6ubH

Job Description Job Summary: The Facilities Director is responsible for providing direct oversight of Federation owned properties: Katz JCC, JCC Camp, 1721 JSB, JFCS Food Pantry, Family Counseling Center, Residential Housing complex, Jewish Day School and more. Administer all facets of property management and oversight to include supervision, planning, communication and coordination of support to all facility tenants. Responsibilities include ongoing management of preventive maintenance, repairs, improvements, renovation, optimal presentation and function of all buildings and grounds. This position will supervise staff and outside vendors and contractors engaged in overall facility maintenance and care in order to ensure the optimal daily operation of all Federation owned facilities. Job Responsibilities: • Manage daily oversight and ensure optimal operation of JFED properties and facilities, • Review and implement facility procedures to ensure efficiency and safe operation, • Provide direct oversight for facility related service contracts, vendors and facility manager in the areas of custodial, landscaping, snow removal, plumbing, electrical, mechanical, pest control, fire, safety, work order management system, etc., • Delegate and spot check cleaning and maintenance tasks to team members, • Monitor the safety and cleanliness of interior and exterior areas, such as offices, conference rooms, parking lot and outdoor recreation spaces, • Use or introduce appropriate facilities operations module: computerized maintenance management system (CMMS) to make daily work assignments and upkeep of facilities and program needs more efficient, • Develop a system to track open projects through completion, • Provide project status reports: inspection, approved repairs, renovations, • Conduct regular facility inspections to ensure compliance, safety and cleaning standards are met, • Coordinate inspections with insurance providers, fire and health & safety officials. Work closely with state and local agencies on all requirements for renovations and new construction: fire code requirement, elevator, boiler inspections, backflow preventer certifications, etc., • Conduct regular inspections of the property to assess any needed repairs and maintenance, • Manage inventory by assessing facilities and equipment conditions, • Help to determine when deficiencies are not within internal capabilities and when to contract outside support, • Develop and coordinate written proposals and other purchasing service contract agreements for the facility, • Participate in short- and long-term budget development, identify facility and operations related expenses, and equipment needs for the agency to succeed at all properties., • Risk Management - Identify possible needs and improvements to facility standards for optimal safety. Communicate findings timely, • Travel periodically to multiple agency locations for meetings, property inspections, and coordination activities, • Serve as an essential employee for emergency operations affecting JFED operations. Partner with JFED and municipal security and safety personnel as needed, • Collaborate with COO and CEO and related Design & Construction Project personnel on construction and renovation projects for JFED facilities. Perform inspections with the owner, architect, and contractors and attend project meetings, • Collaborate and review written proposals for the building, ground maintenance service contracts and other maintenance services such as: HVAC, custodial, elevators, pest control and life safety equipment, • Collaborate with the JFED security to ensure the overall safety of facilities, members and staff, • Collaborate with the COO and agency executive directors to coordinate the short- and long-term range facility improvement goals and projects., • Supervise, mentor and serve as coach to department staff, • Ensure compliance with locality-specific legal standards and safety regulations, • Identify staffing needs to support the workload, • Manage complaints and overall customer service issues in a professional manner, • Bachelor’s degree in facility management, business, information management, or related field, • 5 or more years’ professional experience in Facilities Management, Construction, Operations, or a related field, • 5 or more years of supervisory experience, • 5 or more facilities-related educational or experience related designation: International Facility Management Association (IFMA), Certified Facility Manager (CFM), Certified Energy Manager (CEM) or equivalent., • Ability to manage multiple projects in a timely manner, • Ability to work effectively with team - internal and external contacts, • Proficiency in Microsoft Office, • Excellent oral and written communications skills, • Excellent decision-making skills EEO Statement: The Jewish Federation of Southern New Jersey, and our family of agencies, is an Equal Employment Opportunity employer. We do not discriminate based upon a person’s actual or perceived gender, race, creed, color, sex (including pregnancy), affectional or sexual orientation, gender identity or expression, marital/civil union status, domestic partnership status, familial status, religion, national origin, nationality, ancestry, age, veteran or military status, disability that does not prohibit performance of essential job functions, or other legally protected characteristics. The Federation participates in the E-Verify program. The Federation is committed to working with and providing reasonable accommodation to applicants with disabilities. If you need assistance or an accommodation due to a disability, you may contact us via the link on this posting. EOE

Job Description BPG Real Estate Services, LLC., a rapidly growing company, knows that our success begins and ends with our people. Through the efforts of our associates and guided by our values, we transform the communities we serve, striving to exceed the expectations of our tenants, residents and clients. At BPG, giving our associates the BPG Experience is a top priority. Join us as a Maintenance Supervisor. Job Purpose To assist the Property Manager in achieving their goals through maintaining the physical asset within the parameters set forth in the operating budget. Duties & Responsibilities -Responsible for training and supervision of maintenance staff and participating in hiring process. -Responsible for unit turns, refurbishing and inspection of apartments prior to resident occupancy. Daily update of schedule and status reporting. -Responsible for overall general appearance of property, interior and exterior. -Ensure completion of all resident work orders and provide Property Manager daily updates. -Schedule maintenance personnel and work order requests, adhering to maintenance priorities. -Responsible for stock control and utilization of maintenance materials. Provide orders and quotes to Property Manage and/or Facilities Director for purchasing. -Schedule, monitor and keep accurate records regarding preventive maintenance, work orders, apartment refurbishing, inventories and stock. -Complete move-in, move-out apartment inspections with residents. -Responsible for keeping MSDA logs updated. -Responsible for maintaining a safe work environment and compliance with OSHA regulations. -Assess and perform heating and air conditioning related repairs. -Perform light electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc. -Perform light plumbing work such as clearing stoppages, replacing fittings, etc. -Replace broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, draperies, locks. -Paint interior / exterior as needed. -Perform carpentry work such as fitting doors, freeing windows, replacing and building shelves. -Repair concrete, masonry, roof, fencing when required. -Assist with grounds work when necessary. -Assist in custodial work, including sweeping, mopping, vacuuming, trash removal, cleaning windows, etc. in the common areas. -Participate in a standby emergency schedule for evening, weekend and holiday coverage. -Assist in and manage snow removal when necessary. -Devote full work effort toward fulfillment of property obligations as requested by Property Manager. -Walk the property with Property Manager once per week. -Must have the ability to communicate effectively, both verbally and in writing. -Ability to lift 100 pounds. -Assist in the selection and supervise contractors providing building services such as painting, window cleaning, trash chute cleaning, landscaping, etc. -Supervise vendors providing contract repairs to ensure work is completed in a timely, cost effective, and professional manner. -Inspect, perform light repairs, and arrange for contract maintenance on building systems such as boilers, heaters, fire standpipes, fire alarms, emergency generators, etc. -Supervise capital projects as directed by the Property Manager. Qualifications -Project a professional demeanor at all times through appearance and behavior. Promote positive customer relations. -Must be able to work in a fast-paced environment with demonstrated ability to handle and prioritize multiple tasks and demands. -Must have excellent time management skills and ability to work independently. -Must be detail oriented and be accurate in composing and proofing materials. -Must have strong communications skills both written and oral. -Must have strong leadership and decision making skills. -Must be able to interact and communicate with individuals at all levels of the organization. -Must be computer literate with prior experience in Microsoft Office (Word, Excel, and PowerPoint). -Must have 24/7 availability to respond to emergencies and provide support to on call staff and vendors Education -High school diploma required. -OSHA certification. -EPA certification for handling of refrigerants. Experience -Previous management as a Maintenance Supervisor or Manager -5+ years of experience in the maintenance field required -HVAC Universal is a plus Physical Requirements -Requires standing and walking. -Requires frequent operation of maintenance equipment; such as tools, cleaning equipment, etc. -Frequent stretching and / or bending to access equipment, objects in need of repair, etc. -Frequent lifting, carrying, pushing, and/or pulling of objects weighing up to 50 lbs. Statement of Notices Equal Employment Opportunity BPG Real Estate Services, LLC, provides equal employment opportunities to all qualified individuals without regard to race, creed, color, religion, national origin, age, sex, marital status, sexual preference, or non-disqualifying physical or mental handicap or disability in each aspect of the human resources function. Americans with Disability Act Applicants as well as associates who are or become disabled must be able to perform the essential job functions either unaided or with reasonable accommodation. Applicants as well as associates are encouraged to meet with Human Resources as the organization shall determine reasonable accommodation on a case-by-case basis in accordance with applicable law. Job Requirements The above statements reflect the general duties and responsibilities considered necessary to perform the essential functions of the job and should not be considered as a detailed description of all the work requirements of the position. Other duties may be assigned. The Company may change the specific job duties with or without prior notice based on the needs of the company.

Job Description Solar Project Manager (Regional Asset Manager) About you: You know your way around a solar site. Journeyman or lead tech experience, then a few years of project management. You've turned a wrench, traced a ground fault in the field, and you don't need a refresher on torque settings; you've lived them. You don't need to be an engineer, but you've got enough field time to know when something looks wrong and enough Project Management chops to get it fixed. You're not shy about holding contractors accountable, and you know how to keep things professional even when the work (or the invoice) doesn't add up. You don't disappear on people. You pick up the phone when a customer calls. You write clear emails. You close the loop. You hustle. Most importantly, you want a role where your work directly impacts production, safety, and performance across a big portfolio of sites with a team that's got your back. About us: We're one of the fastest-growing solar asset owners in the U.S. We own and manage hundreds of C&I (Commercial and Industrial) solar sites nationwide, and we believe the folks in the weeds deserve the same respect as the folks in the boardroom. We're serious about long-term operations, performance, and safety, and we need people who are just as serious. We're expanding our team and looking for a Regional Asset Manager to own 100-150 sites, solve problems fast, and be a reliable point of contact for vendors, customers, and tenants. You won't be alone in this. You'll work closely with: • A monitoring team that flags underperformance., • Regional O&M providers (already under contract) that you'll manage, escalate, or substitute if needed., • Our Senior Project Manager of Asset Management (40+ years in the field) for complex situations., • A full in-house engineering team (civil, structural, electrical) from our construction arm. Key Responsibilities: • Own full-scope asset management for 100-150 commercial solar sites, • Achieve 100% controllable Weather-Adjusted Production. Solve issues fast, hold vendors accountable, • Maintain site safety and prevent thermal events. OSHA/NFPA70E standards are second nature to you, • Keep maintenance spend under budget, • Visit 10% of your sites each year and walk 5% of incoming sites. Eyes on the ground matters, • Oversee 3–5 major site remediations each year, start to finish, • Be a friendly, reliable POC for tenants and site contacts. Answer the phone when things go wrong, • Maintain and update provider lists for O&M, MV, landscaping, etc., • Review preventative maintenance reports and interpret contractor quality and thoroughness, • Track and maintain warranties, spares, and site history (with analyst support), • Approve invoices and upload clean data into Salesforce, • Be on-call for emergencies (we rotate coverage) What You Bring: • Journeyman-level field experience with C&I (Commercial & Industrial) solar systems (hands-on, not just desk work), • 2+ years managing solar projects or O&M contracts, • Ability to read a 3-line electrical diagram and interpret spec sheets, • Familiarity with solar testing (thermals, megger, IR, ground faults, inverter troubleshooting), • Strong understanding of site safety: OSHA 10/30, NFPA70E, • Ability to review contractor reports and spot BS, • Vendor management skills. You can push back on underperformers and pivot to alternates when needed, • Clear communication and organization. You close loops and keep people informed, • Comfort with Outlook, Word, Excel, Salesforce, Zoom, Teams, Slack, • 5+ years of professional experience, • Willingness to travel, walk sites, and get your hands dirty in a fast-moving, scaling environment (approx. 1.5 days per week) Compensation & Perks: • Competitive base salary + bonus opportunity, • Full healthcare, dental, vision, and life insurance, • 401(k) with match, • PTO and paid family leave, • Take-home vehicle (depending on region), • Education reimbursement for relevant coursework or certifications, • Strong culture of respect, performance, and personal growth$125,000 - $155,000 a yearThe actual salary offered may vary depending on job-related factors including, but not limited to knowledge, skills, experience and location.How We WorkAt Madison Energy Infrastructure, we believe in the power of clean energy infrastructure to drive real impact—for our customers, our partners, and the communities we serve. We've quickly emerged as a preeminent developer, investor, and operator of distributed generation, helping organizations across sectors meet their energy goals with certainty, speed, and trust. Our robust portfolio consists of over half a gigawatt of clean energy infrastructure projects across more than 25 states.We're building a team that thrives on ownership and ambition. As we expand into direct, end-to-end services for Fortune 500 companies, public entities, and nonprofits alike, we rely on collaborative thinkers who bring structure to complexity, energy to execution, and curiosity to every challenge.Our environment is fast-paced and outcome-oriented—but grounded in the belief that how we work together matters as much as what we deliver. If you're excited to shape the future of clean energy and be part of a high-performance, high-integrity team, we'd love to meet you.Madison Energy Infrastructure is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Job Description: The Maintenance Supervisor is highly skilled in Facilities Management and Operations. As a Leader and mentor for the community the Maintenance Supervisor is a reliable, trustworthy professional responsible for the overall Maintenance and operations of the community. This involves ensuring a safe and secure living environment for Residents, Visitors and Associates. The Maintenance Supervisor will continually improve operating conditions, quality, and integrity of all building systems and appearances, while delivering superior customer service to our Residents. They are tasked with improving and standardizing quality of services and products used in the maintenance of properties. The Maintenance Supervisor will work closely with the Property Manager to ensure excellent customer service to Residents and all maintenance issues are resolved within established guidelines. Reports to: Property Manager Supervises: Supervises entire on-site maintenance staff including but not limited to, Maintenance Technician(s), Groundskeeper(s), Porters(s), and Housekeeper(s). Wage Status: Exempt (Ineligible for overtime) Job Responsibilities: • Effectively leads, manages, trains Associates. Assigns work orders and provides technical assistance to maintenance associates., • Assists in the selection of maintenance associates. Provides feedback for performance reviews and recommendations for training., • Participates in on-call emergency rotation and responds to emergencies as needed., • Leads property inspections and vendors including; building and alarm systems inspections and preparing the property for any outside inspections., • Inspects vacant units, ensuring turnovers are completed within a timely manner., • Reviews work order logs and sets priorities for work order completion., • Establishes and implements auditing procedures for maintenance inventory. Monitors inventory levels while remaining within established budgets., • Reviews contracts and makes recommendations for approvals., • Manages subcontracted service providers and documents work and product quality., • Facilitates technical training and technical skill development for property associates., • Remains aware of the condition of physical property throughout the community and immediately correct any unsafe conditions; e.g., broken gates leading to the pool, broken steps, open holes, broken/burned out exterior lights., • Maintains accurate records regarding preventive maintenance, work orders (received and completed), expenditures, apartment make-ready status, work-in-progress, etc., • Reviews and makes recommendations to revise routine and preventative maintenance schedules Schedule and perform minor and routine maintenance on all appropriate equipment on a regular basis., • Associates must meet or exceed the performance standards of this position and comply with policies, rules and procedures of the company, including those set out in the Associates Handbook or otherwise communicated (verbally or writing) to Associates., • Inspects others work orders in vacant units, ensuring turnovers are completed on schedule and meets or exceeds community standards., • Utilizes maintenance program to track work orders, preventive maintenance, inventory, product replacement histories., • Conduct grounds inspections:, • Trash pick-up, sweeping and light landscaping. Removes snow and ice from sidewalks, walkways, steps, and driveways. Diligently monitors the community for slip, trip and fall hazards., • Coordinate special projects as directed. Including assisting during the event, setting up, monitoring, moving furniture, equipment and breakdown., • Conducts all business with integrity in accordance with company policies and procedures, local, state and federal laws; OSHA, ADA, Fair Housing, etc., • Maintains and communicates HAZCOM standards. Keeps MSDS sheets current and readily accessible. Maintains thorough knowledge of pertinent laws and EPA and OSHA regulations governing property storage and management of hazardous materials, including solvents, flammables, caustics and refrigerants., • Inspects and maintains all tools in excellent condition and ensure an adequate inventory of spare parts and maintenance materials., • Instills a "safety first" attitude not only with maintenance staff but with all employees. Requirements: • Collegiate degree or equivalent Trade School Degree in HVAC, electrical, plumbing or another trade., • HVAC Certification preferred., • 10 years maintenance, construction or Project Management experience., • Minimum 5 years’ experience in a managerial roll., • Advanced knowledge in all building and maintenance systems, including inventory control, preventative maintenance, and work order record keeping., • Advanced knowledge in mechanical systems and equipment including HVAC, plumbing, carpentry, painting, electric and Life Safety systems., • Proficiency in building practices and standards., • Attendance and reliability is an imperative job function., • Meets all physical requirements to perform all job functions and responsibilities., • Valid Driver's License and reliable transportation required., • Ability to perform heavy lifting (at least 60 lbs), climb ladders up to 24 ft, stand and walk for 8 hours, and perform other physically demanding duties as directed., • Ability to communicate clearly and effectively with customers, colleagues and supervisors in spoken and written English to ensure successful completion of job duties. Post Brothers provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Post Brothers complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Logistician I – IV – NSWCPD Code 316 Salary Grade/Level/Family/Range Logistician I: $50,000 to 60,000 Logistician II: $60,000 to $70,000 Logistician III: $70,000 to $80,000 Logistician IV: $100,000 to $110,000 Company Overview: KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility Position Summary / Objective: The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 316, which is responsible for the Planned Maintenance System (PMS)/Class Maintenance Plan (CMP), Reliability Centered Maintenance (RCM) and PMS Service Request (PSRs), review of New Construction PMS Contract Deliverables, and PMS update and development for in-service, modernization, new construction, and land-based engineering test site maintenance documents. Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Collect, review, and process Fleet logistics and maintenance feedback (e.g., TFBRs, LARs, MAFs) for shipboard mechanical and electrical systems., • Analyze Planned Maintenance System (PMS) data and recommend updates to MIPs/MRCs based on field experience and reliability trends., • Support the development, review, and update of ILS documentation including:, • Maintenance Plans, • Technical Manuals, • Provisioning Technical Documentation (PTD), • Allowance Parts Lists (APLs), • Logistics Support Analyses (LSA), • Use Navy data systems (e.g., CDMD-OA, TDMIS, OMMS-NG, SKED, SCLSIS) to assess configuration, logistics status, and maintenance effectiveness., • Track the incorporation of feedback into logistics products and PMS systems., • Collaborate with engineers, technicians, and Fleet representatives to resolve supportability issues and maintain logistics accuracy across ship classes., • Prepare logistics assessments, reports, and briefing materials in support of PMS and ILS process improvements., • Participate in ILS Reviews (ILSRs), Technical Evaluation Reviews (TERs), and Engineering Change proposals related to logistics. Required education and experience: • Bachelor of Science (or higher) in Logistics, Supply Chain Management, Engineering, Business, or related field (or equivalent experience)., • Familiarity with Integrated Logistics Support (ILS) elements and lifecycle sustainment planning, • Working knowledge of Navy maintenance and logistics systems (e.g., PMS, TDMIS, OMMS-NG, CDMD-OA)., • Required years of professional experience in logistics or life cycle support, preferably supporting Navy or DoD programs:, • Logistician I – Entry Level, • Logistician II - 3 years, • Logistician III - 7 years, • Logistician IV - 10 years Preferred education and experience: • Prior Navy or DoD experience in logistics, maintenance planning, or configuration management., • Experience with Logistics Support Analysis Records (LSAR) or Product Data Reporting and Evaluation Program (PDREP)., • Understanding of NAVSEA technical documentation standards and processes., • Experience with supporting PMS updates and Fleet feedback response workflows., • Technical writing experience, particularly with maintenance or logistics documentation., • Adept at learning new systems and terminology. Competencies: • Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software., • Excellent verbal and written communication skills, as well as presentation skills., • High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors., • Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities. Additional eligibility requirements Work authorization/security clearance requirements: Active Secret clearance is required. Other Duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Supervisory Responsibility: None Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs. Position Type/Expected Hours of Work: The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status. Telework: • Situational telework may be allowed for this position subject to customer requirements/expectations. Travel: • Ability to travel CONUS; potential to travel OCONUS, • Travel up to 10% may be required Benefits and Additional Compensation: KMS offers a competitive benefits package including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace. #ZR #LI-KMS

Job DescriptionAbout Mastery: Founded in 2001, Mastery Schools is a public charter network of 23 K-12 schools in Philadelphia and Camden, serving more than 14,000 students. At Mastery, we’re on a mission to provide all students with the academic and personal skills they need to succeed after graduation and pursue their dreams. Student achievement is not just a goal for our organization; it's the reason we exist, and every member of our team is dedicated to securing student success. We are also committed to pursuing equity, actively disrupting systemic racism, and addressing the disparities that limit our students' choices. Our culture is built on respect, service, and the belief that the success of our students, their families, and the communities we serve will help us achieve our mission. We foster a positive, open, and inclusive environment where honesty, humor, and continuous improvement are celebrated. Join us in creating a model urban school district that serves all students with excellence. Together, we can make a lasting impact. This role is eligible for a $1,000 signing bonus! Position Summary: The Building Engineer will perform preventive and routine maintenance and repairs on buildings and systems; including but not limited to HVAC, electrical, plumbing, carpentry and general building repairs ,furniture moves , life safety and associated systems and other duties as assigned. The Building Engineer will work closely with the Operations Director to ensure the reliable operation of building systems, physical appearance, safety and security of all facilities. The position reports to the Operations Director.Duties and Responsibilities: • Providing maintenance and upkeep of school building on a daily basis, • Performing preventive and routine maintenance and repairs on building and systems; including but not limited to HVAC, electrical, plumbing, carpentry, painting ,general building repairs, life safety and associated systems, • Completing assigned work and maintenance requests in a timely and professional manner, • Executing emergency procedures on building systems and sub-systems, • Performing trash and snow removal as needed, • Climbing ladders to replace lamps and to work on equipment, • Performing operational checks to ensure equipment is operating within parameters and at maximum efficiencies, • Lifting equipment, tools, and building supplies, • Maintaining equipment logs, records, operational data and history, • Ordering equipment and supplies as needed for the maintenance of the school building, • Other duties and responsibilities as assigned by the Director of OperationsQualifications:, • Must have a Class “A” Engineers license for Boilers or must be able to obtain the license with-in the 1st year of hire, • Must have Building Certification Type A, HVAC Certification and EPA Universal HVAC license, • Ability to climb ladders and lift 55lbs or more, • Ability to work in confined spaces, • Maintain building exterior and curb appeal (i.e. snow removal, lawn care , trash removal), • Excellent verbal, written and communication skills, • Must be effective working independently with little or no supervision, • Strong organizational skills and proficient in establishing priorities, • Ability to communicate and cooperatively work with a diverse group of people, • Must have Valid Driver’s License, • Must be able to pass background checkEducation and Experience:, • High School and/or Trade Vocational School Graduate, • Required certification and/or experience in building related trades in one (1) or more areas: HVAC , Electric, Plumbing and/or Carpentry, • Minimum three (3) years commercial HVAC service, repair or maintenance experience with rooftop units preferred, • Five (5) years of related experience and/or training in a facilities maintenance position, • Experience working on complex equipment components, computer systems and blueprints, • Experience or interest in an urban high school settingPhysical Requirements:, • Sitting, talking, hearing, and seeing; Driving, standing for long periods, walking, climbing, balancing, stooping, kneeling, crawling, pushing, pulling, feeling, reaching, lifting heavy equipment, grasping, twisting above the waist, bending at waist, repetitive hand and arm motion, and fine finger manipulation in the use of a computer. Climb ladders, enter crawl spaces, exertion of force, manipulation of hand and/or foot controls.Salary and Bonus Information:

Job Description About Premier Home Pros Premier Home Pros is a fast-growing bathroom remodeling company headquartered in Akron, Ohio, with a vision to become the leading national provider of hassle-free bathroom renovations. Our Mission: We are passionate about transforming bathrooms into beautiful and functional spaces, delivered with exceptional speed and ease for homeowners across the country. National Growth and Opportunity: We're experiencing explosive nationwide growth and actively seeking passionate individuals to join our team. If you're a highly motivated individual who thrives in a dynamic environment, this is the place for you! Why Choose Premier? • Be part of a ground-breaking company at the forefront of the home improvement industry., • Support our mission of delivering exceptional customer experiences., • Enjoy competitive rates, a comprehensive benefits package, and paid-time off. As part of our growth strategy, we are actively seeking an experienced and strategic professional to join us a Field Manager. This position requires a combination of technical expertise, leadership skills, and strong attention to detail. The Field Manager will play a crucial role in ensuring the successful completion of construction projects by overseeing all aspects of the process. If you have a passion for construction, excellent organizational skills, and the ability to thrive in a fast-paced environment, we encourage you to apply. Key Responsibilities and Tasks (Essential Functions): • Perform service and warranty work in the field., • Manage standard work for daily proficiency and effectiveness., • Inspect Installation., • Overall responsibility for quality and cost-effective installations., • Develop high level efficiencies and effectively close out business., • Monitor installers quality of work in field., • Build relationships in the field., • Participate in management staff meetings to communicate and receive information., • Manage delivery schedule in coordination with the general contractors., • Drive to customer sites to manage the installation from installation to completion., • Extensive bathroom experience, • Extensive plumbing experience, • Results-oriented. Problem solving skills., • Ability to manage process., • Action-oriented., • Effective communication skills., • Ability to work in a fast-paced, high-growth, and rapidly changing environment., • Ability to read project plans and drawings., • Minimum of a high school diploma with a certificate from a technical or trade school related to the building materials industry, education beyond high school a plus., • Minimum of 3 to 5 years of field experience i.e., bathrooms, plumbing, carpentry, electrical, etc., • Driving is a requirement for this position., • Must be able to lift up to 50 pounds., • A valid driver’s license is required., • Vehicle insurance as required by state law is required., • Satisfactory completion of a motor vehicle report.

Job Description: \n\n • This position supports NSWCPD Code 431 Aircraft, Vehicle, Ship & Material Handling and Stowage, and Code 433 Launch, Recovery & Hydraulic Systems branches. \n, • The Code 431/433 are responsible for in-service engineering for crane, davit, submarine hydraulic, surface ship steering, hydraulic systems as well as aircraft elevators, powered closures and doors, vertical package conveyors, anchors, mooring, towing, well deck, vehicle ramps, and stowage systems. \n, • The candidate will provide engineering and technical support for Code 431/433 systems focused on launch, recovery and hydraulic systems as well as aircraft, vehicle, ship and material handling systems. \n, • Master's level degree in Electrical/Electronics Engineering.\n \n\n • Must be a US Citizen\n, • A secret security clearance \n\n \n All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. \n ORBIS offers an excellent benefits package and a competitive salary in a professional atmosphere.

Job DescriptionDescription: TDI Technologies, Inc. (TDI) is seeking candidates for a Mechanical Engineer position with a strong background in acoustics and vibration to join our engineering team. The ideal candidate will have a minimum of 5 years of relevant experience, with a proven ability to perform hands-on testing, data analysis, and technical reporting in both laboratory and field environments. This role is critical to supporting R&D efforts through advanced testing, fixture design, and in-depth analysis of acoustic and vibration phenomena. Benefits: Medical, Dental, Vision, Life Insurance, Disability Insurance, ID Theft Protection, Prepaid Legal, 401K, Tuition Reimbursement, Professional Development, Paid Vacation, Paid Holiday, and Paid Sick Leave Principal Duties/Responsibilities: 1. Prepare cost estimates for operational and flow related test planning, test execution, data analysis and technical report preparation in support of Subsea and Seabed Warfare (SSW) and hull mechanical and electrical systems (HM&E) subsystem component evaluation., 2. Provide test site design guidance, support test scheduling, develop test procedures, support/attend test readiness reviews, and collect and analyze test data., 3. Complete documentation packages and provide oversight for all Mission Readiness Panels documentation and reviews to ensure compliance and light off of test facilities., 4. Collaborate with the C/324 Fluid/Acoustic Labs Subject Matter Experts and engineering team to design repair, install, modify, operate, maintain, and troubleshoot HM&E systems and subsystem components such as valves, CORDs, and other Navy HM&E components., 5. Utilize C324 Data Acquisition Systems to set up test instrumentation and record data during test execution periods., 6. Evaluate acoustic data from fluid-borne, structure-borne, and air-borne noise sources acquired during operational testing at test sites for compliance with operational thresholds., 7. Prepare and review technical reports post-test and present results to program management. Requirements: Education and Experience Requirements: • Bachelor of Science Degree in Mechanical Engineering from an ABET accredited university., • Minimum of 5 years of experience in the field of mechanical engineering with a focus on acoustics and vibration., • Hands-on testing experience in both laboratory and field environments, including acoustic and vibration data collection as well as modal analysis., • Proven ability to work independently, including designing and fabricating test fixtures for R&D type lab testing., • Proficient in using MATLAB or Python for signal processing and analysis of test data., • Successful applicants must either have an active government security clearance or the ability to receive approval upon position acceptance. Due to the nature of our work with the U.S. Department of Defense, U.S. citizenship is required. Some positions may require the renunciation of any non-U.S. citizenship to obtain and maintain a security clearance. Essential Skills: • Proficiency in developing and conducting tests of complex electrical and mechanical systems, • Familiarity with MATLAB, Simulink and data acquisition systems (Brüel & Kjær, LMS Test.Lab), • Results-oriented and motivated to provide solutions with measurable benefit to our customers, • Ability to communicate complex analysis with clarity and precision, • Proficiency in Microsoft Office applications, • Shipboard or industrial experience with mechanical machinery systems, testing, troubleshooting, and repair is preferred. Philadelphia, PA Clearance Level: Secret Type: Full-Time Equal Opportunity Policy: TDI Technologies, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layout, recall, transfer, leaves of absence, compensation and training. #LI-DNI

Job DescriptionMechanical Engineer - Building Systems Design Are you a skilled Mechanical Engineer with a passion for creating efficient and sustainable building systems? Join our team, where you'll contribute to innovative projects and have the opportunity to make a significant impact on the engineering and construction industry. We are seeking a talented and detail-oriented Mechanical Engineer to develop comprehensive mechanical drawings and specifications. The ideal candidate will have a strong foundation in HVAC systems, plumbing, fire protection, and energy conservation, along with experience in engineering investigations and facility assessments. If you thrive in a dynamic environment and are committed to excellence in design, we'd love to hear from you. Key Responsibilities: • Develop mechanical drawings and specifications for building systems., • Design and optimize HVAC systems, boilers, chillers, plumbing, and fire protection systems., • Perform engineering investigations and facility assessments to evaluate system performance and identify areas for improvement., • Conduct economic analyses of alternate HVAC systems and provide data-driven recommendations., • Ensure compliance with applicable codes, standards, and regulations., • Collaborate with multidisciplinary teams to integrate electrical, BIM, renewable energy, and energy conservation solutions into projects., • Utilize AutoCAD and REVIT software to produce high-quality design documents., • Stay updated on the latest industry trends, technologies, and best practices, including LEED certification and energy auditing principles., • Bachelor's Degree (BS) in Mechanical Engineering., • Professional Engineer (PE) License preferred., • 5–10 years of professional experience in mechanical engineering design, particularly in HVAC, plumbing, and fire protection systems., • Proficiency in AutoCAD; familiarity with REVIT is highly desirable., • Knowledge of industry standards, codes, and practices., • LEED Certification or Certified Energy Auditor/Manager credentials are a plus., • Strong analytical and problem-solving skills with a focus on energy efficiency and sustainability., • Work on diverse and exciting projects in the engineering and construction sector., • Collaborate with a team of experienced professionals who value innovation and quality., • Opportunities for professional growth and development, including certifications and training., • Contribute to meaningful projects that prioritize energy conservation and renewable energy solutions.

Job DescriptionDescription: We have an immediate opening for an energetic, enthusiastic and highly motivated collision professional to join our growing and dynamic team! Are you a career minded individual in search of a workplace to call home? At Faulkner Collision, you’ll have the opportunity to have a positive impact on our customers and our community while achieving your financial and career goals! Qualifications: · Welding, suspension, framework experience a plus OR willing to learn/train · ASE Certifications; Damage Analysis and Estimating, Mechanical and Electrical Components, Non-Structural Analysis and Damage Repair and State Vehicle Inspector (preferred) · Certifications listed above or equivalent experience and eagerness to improve · Valid driver's license and clean driving record Responsibilities: · Identify and resolve parts required for repair; review repair orders, work order, and Body Shop Manager’s estimate notes; follow warranty guidelines; notify supervisor of any repair add-ons. · Adjust, replace, and repair all series of equipment (e.g., sheet metal repairs, fiberglass/ panel repairs, fabrication and structural welding, installation and alignment body components, electrical and mechanical repairs, etc.). · Teardown and inspect for additional or hidden repairs. What we offer: · Hourly flat rate pay: · Full Time · PTO and holidays · 401(K) retirement plan with company matching · The top insurance program in the industry including medical, dental, prescription and vision · Advancement within the Ciocca Automotive Family · Employee discounts: purchases, repair, service, wash At Faulkner Collision, our team members enjoy a supportive and collaborative work environment. Don’t miss out on this exciting opportunity to grow your career! Apply now! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job Description The Production Supervisor – is responsible for overseeing daily operations of the line, ensuring production efficiency, product quality, and compliance with safety and food manufacturing standards. This role involves leading and coordinating the production team, monitoring performance metrics, optimizing processes, and supporting continuous improvement initiatives. What You’ll Do: Team Leadership & Development * Lead, schedule, and support your team to meet production goals efficiently and safely. * Train team members in both soft and technical skills, creating a strong and capable workforce. * Foster a culture of accountability, empowerment, and continuous improvement. * Take full ownership of the production line, encouraging collaboration and high performance. Operational Excellence * Monitor quality, yield, and efficiency, taking proactive steps to resolve issues and improve outcomes. * Manage inventory, plan production, and optimize costs through smart resource allocation. * Ensure equipment is operated safely and maintained regularly. * Organize production schedules to meet deadlines and maximize throughput. Compliance & Safety * Ensure all team members follow food safety protocols including HACCP standards. * Promote and enforce safe work practices in all areas of the operation. Qualifications: * High school diploma or equivalent required. * Minimum of 1 year of supervisory or production experience, preferably in a similar industry. * Bilingual in English and Spanish (written and spoken). * Strong communication, organizational, and leadership skills. * Experience in inventory management and production planning. * Basic computer skills (Microsoft Office proficiency required). * Some electrical or maintenance knowledge is a plus,but not required. We Offer: Comprehensive benefits package including: Medical Insurance Vision Insurance Dental Insurance Life Insurance.

Job DescriptionSalary: This position is on-site 2-3 days in Philadelphia About Proscia Pathology is at the center of medicine and is undergoing a profound transformation as the final frontier of digitization in healthcare. We started Proscia to accelerate pathologys transition from microscope to images, and to use AI to change the way we think about cancer. We cant change medicine alone. Thats why were looking for curious thinkers. Big dreamers. Developers, evangelists, pathologists, and scientists. Exceptional talent to help us use AI for good and advance humankind. At Proscia, we push the limits of medicine and technology, solving problems the world has never solved before. We build software used by thousands of scientists and pathologists, who work on the front lines of fighting cancer for patients globally. To accelerate our vision, Proscia has raised over $100M in capital from world-class healthcare and technology investors. About this Position As aSenior Data Engineer, you will contribute to Proscias growing Real World Data (RWD) business, which operates as a startup within a startup. In this entrepreneurial environment, you will help build and scale innovative data solutions that drive better outcomes for cancer patients and support cutting-edge research into therapies and drug regimens. Success in this role requires independence, adaptability, and close collaboration with cross-functional teams while maintaining alignment with broader engineering initiatives. What Youll Do Working at a startup like Proscia means wearing many hats, but when you come to work, you can expect to focus on the following: • Develop and refine data pipelines in collaboration with the RWD team and customers, ensuring seamless extraction, transformation, and loading (ETL) of data from customer systems into Proscias repositories., • Work independently to identify and implement process improvements, such as automating manual data migration tasks to accelerate data flows., • Design, build, and optimize API integrations, including REST and event-driven/pub-sub architectures, to enable real-time data ingestion, transfer, and quantification., • Modify and create Python scripts to allow customers to efficiently upload data, including images, metadata, and other formats., • Architect data models, data warehouse design patterns and scalable database solutions to support rapidly growing data while ensuring efficient performance and metadata processing., • Collaborate with cross-functional teams, including the core engineering and AI teams, to align technical strategies and ensure seamless integration of RWD solutions with the larger Proscia platform., • Operate with a startup mindset, contributing to the RWD teams agility and entrepreneurial spirit while delivering high-impact results. What Were Seeking Were looking for people who are smart, nice, and get stuff done. Proscia thrives on entrepreneurial thinkers who excel in fast-paced, challenging environments and are ready to build the plane while flying it. Our ideal candidate has: • 35+ years of professional experience with Python scripting for data management., • 3+ years of experience with detailed knowledge of data warehouse technical architectures., • Strong analytical skills and attention to detail, with a proactive approach to solving problems., • Experience with JavaScript and familiarity with modern frameworks (preferred)., • Proficiency in SQL and/or PostgreSQL., • Hands-on experience with REST API development and integrations., • Experience in cloud platforms, particularly AWS (preferred)., • Expertise with Snowflake or similar data warehouse platforms, • Software engineering principles testing (definition of unit tests, integration tests), setting up CI/CD pipelines and experience with containerization technologies like Docker and orchestration tools like Kubernetes., • The ability to work independently within a cross-functional team and coordinate effectively across other engineering teams to design and implement high quality data pipelines., • A Bachelors degree in Computer Science, Computer Engineering, or Electrical Engineering (Masters degree preferred)., • Experience working in the life sciences/biopharmaceutical industry is a plus. Beyond Just Work At Proscia, we want our people to thrive inside and outside the office. Along with competitive pay, we provide comprehensive benefits, flexible schedules, and insurance options to promote long-term health and personal growth. Our creative, collaborative office environment in Philadelphia is designed for agility, complete with writable walls and breakout spaces. Remote teammates stay connected through innovative collaboration tools and regular opportunities for in-person interaction. We celebrate diversity and foster a culture where everyone belongs. Proscia is proud to be an equal-opportunity workplace.

Job Description Electrical Engineer – Buildings Philadelphia, PA | Hybrid & Flexible Work Options $90,000 – $125,000 annually About the Company Join a nationally recognized consulting engineering firm that thrives on innovation, collaboration, and forward-thinking design. With projects spanning commercial, institutional, multi-residential, and public spaces, this firm is shaping skylines and communities across North America. The Opportunity We are searching for an Electrical Engineer who is passionate about designing advanced building systems that merge performance, sustainability, and aesthetics. This role puts you at the center of a multidisciplinary design environment, giving you the chance to influence projects from concept to completion while working alongside leading architects, engineers, and construction teams. What You'll Do * Design Excellence: Lead the design and integration of electrical systems in complex building projects, ensuring alignment with all codes, safety standards, and client expectations. * Innovation & Analysis: Perform load calculations, system simulations, and technical evaluations to deliver cost-effective, high-efficiency solutions. * Project Delivery: Prepare detailed construction documents, specifications, and engineering drawings using Revit MEP, AutoCAD, and other cutting-edge tools. * On-Site Insight: Conduct field assessments, building condition reviews, and zoning research to inform and refine your designs. * Quality Leadership: Oversee shop drawing reviews, contractor submittals, and technical deliverables to maintain the highest level of engineering accuracy. Your Background * Bachelor's degree in Electrical Engineering (Master's a plus). * Licensed P.Eng. or PE, or actively pursuing professional registration. * 6–12 years of experience designing electrical systems for buildings (commercial, residential, institutional, industrial). * Proficiency in Revit MEP, AutoCAD, and electrical modeling software. * Solid understanding of building codes, NEC, NFPA, and local regulatory frameworks. Why This Role Stands Out ? Competitive salary and full benefits package ? Flexible hybrid schedule promoting work-life balance ? Access to iconic, high-profile projects across multiple sectors ? Inspiring mentorship and professional development opportunities ? A collaborative, design-driven culture where your ideas matter ? Clear pathways for advancement into senior leadership Apply Today This is your chance to join a firm where creativity meets technical excellence. If you're ready to push boundaries and make your mark on the built environment, we want to hear from you, click apply now or contact Laura Shalev at Keywords: Electrical Engineer, Electrical Designer, Electrical Design Engineer, Electrical Engineer Buildings, Electrical EIT, Senior Electrical Engineer, Intermediate Electrical Engineer, Revit MEP, AutoCAD, PE, P.Eng., Philadelphia, PA, Camden NJ, Trenton NJ, Wilmington DE, Norristown, Chester, Plymouth, Upper Darby, Bensalem #LI-TS1 #TSSHP

Join a global community of talented professionals to shape the future of AI. Earn up to $15 USD/hr and additional rewards based on quality of submission. \n Outlier is committed to improving the intelligence & safety of AI models. Owned and operated by Scale AI, we’ve recently been featured in Forbes for partnering experts with top AI labs to provide the high quality data for LLMs. We believe AI can only perform as well as the data it’s trained on. That’s why we work with contributors from all over the world, who help improve AI models by providing expert human feedback. This data has led to AI advancements for the world's leading AI labs and large language model builders. We’ve built a best-in-class remote work platform for our freelance contributors to provide valuable, specialized skills, and we in turn strive to provide them with a positive experience based on our core pillars of reliability, transparency, and flexibility. \n What you will be doing \n We are looking for someone who speaks fluent English to contribute their expertise toward training and refining cutting-edge AI systems. \n\n • Adopt a “user mindset” to produce natural data to meet the realistic needs you have or would use AI for.\n, • Use the tool of rubrics to address user needs in a structured way.\n, • Evaluate AI outputs by reviewing and ranking reasoning and problem-solving responses from large language models.\n, • Education: Bachelor’s degree or higher (or currently enrolled).\n, • Analytical and Problem-Solving Skills: Ability to develop complex, professional-level prompts and evaluate nuanced AI reasoning.\n, • Strong Writing: Clear, concise, and engaging writing to explain decisions or critique responses.\n, • Attention to Detail: Commitment to accuracy and ability to assess technical aspects of model outputs. Nice to Haves:\n • Experience in fields like literature, creative writing, history, philosophy, theology, etc.\n, • Prior writing or editorial experience (content strategist, technical writer, editor, etc.).\n

Job Description mbedded Software Engineering Manager Philadelphia PA Full-time, Onsite (No Remote Options) 9/80 Work Week (Every Other Friday Off) Department of Defense (DoD) Secret Clearance REQUIRED $150,000 to $200,000 + Bonus + Full Benefits That's a great idea. To expand the job description and make it even more comprehensive and appealing to top-tier candidates, we should elaborate on the team environment, technical challenges, and career growth potential. We are not just growing—we are undergoing an explosion of opportunity, offering a dynamic and challenging environment for leaders passionate about Information Assurance and complex Real-Time Embedded Systems. If you thrive on solving complex, multi-disciplinary problems and mentoring a world-class team, this is where you belong. ResponsibilitiesI. Technical & Process Leadership • Design Authority: Lead the architectural design, specification, implementation, and rigorous development lifecycle for high-assurance embedded software products., • Driving Excellence: Champion and enforce efficient development processes, creating and institutionalizing best practices for source control, automated testing, continuous integration, and continuous delivery (CI/CD)., • Quality Assurance: Conduct detailed code and design reviews, ensuring the delivery of high-quality, secure, and performant software that meets stringent defense requirements., • Technical Contribution: Serve as a hands-on technical contributor or subject matter expert on key projects as necessary, helping to remove technical roadblocks and guide complex problem-solving.II. Strategic and Program Management, • Resource Optimization: Collaborate seamlessly with Systems, Electrical, and other Engineering Managers to strategically allocate engineering assignments, ensuring optimal productivity and alignment with program schedules and goals., • Financial Oversight (EVMS/CAM): Function as the Cost Account Manager (CAM), taking responsibility for planning, budgeting, and managing the earned value (EVMS) of assigned work packages., • Proposal Development: Lead and contribute to the development of technical volumes and accurate Basis of Estimate (BOE) cost models for new engineering proposals, driving future business growth.III. People and Organizational Management, • Mentorship and Growth: Provide hands-on coaching, technical guidance, and career path development for a talented team of software engineers, fostering a culture of continuous learning and accountability., • Talent Acquisition: Own the full recruitment lifecycle—from defining needs and conducting technical interviews to managing the hiring and onboarding process—to continually expand the team with top technical talent., • Performance Management: Conduct formal performance evaluations, manage compensation planning, and address personnel matters to ensure a motivated and high-performing team environment., • Education: Bachelor's degree in Computer Science, Software Engineering, Computer Engineering, or Electrical Engineering. (A Master's degree is highly desired.), • Experience:, • A minimum of 9 years of technical experience in software development (or 7 years with a Master’s degree)., • At least 2 years of demonstrated experience serving as a formal team lead, technical lead, or functional manager overseeing a software development team., • Clearance: Active DOD Secret Clearance (or higher) is a mandatory requirement for this role., • Business Acumen:, • Demonstrated experience in recruiting, interviewing, and hiring technical talent., • Experience developing inputs for technical and cost volumes of defense proposals., • Direct experience as a Cost Account Manager (CAM) utilizing an Earned Value Management System (EVMS).Desired Technical and Process Skills, • Agile Expertise: 1–2 years of experience working within an Agile/Scrum or Kanban development framework., • Security Domain: Deep development experience in Information Assurance (e.g., Type 1, commercial IPSEC, hardware/software-based encryption, key management, secure communications)., • Real-Time/Embedded Focus: Expertise in Real Time embedded software development, particularly for high-reliability or safety-critical systems., • Industry Knowledge: Experience with Naval Communications (interior or exterior systems) or other defense communication platforms., • DevOps/Tooling: Hands-on experience implementing and maintaining DevOps pipelines, tools, and procedures for continuous integration and automated deployments.

Job Description Protection & Control Engineer/Technician – Field Testing & Commissioning Travel-Heavy Field Role – Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We’re looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You’ll Do: * Test and commission P&C systems on high-voltage substations (15 kV – 500 kV) * Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets * Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing * Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports * Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: * 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) * Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. * Experience with NETA, IEEE, NFPA, and related standards * Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset * Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: * Bachelor’s in Electrical Engineering/Electrical Technology * Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) * IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

Job DescriptionDescription: EHS Technologies is a cutting-edge IT, Cyber Security and Engineering Firm dedicated to solving the Department of Defense’s most challenging problems. Join EHS Technologies to make a difference while being a part of a skilled, knowledgeable and mission driven team. As a team member of EHS Technologies, you’ll have available benefits including Bonus Eligibility, No Cost Full Coverage Health Insurance, available Pet Insurance, industry high 401k matching among many other excellent benefits and up to 26 days of holiday and PTO. Location: Max telework per NSWCPD guidelines. Must currently reside in Philadelphia area (within reasonable distance to NSWCPD) POSITION: Electrical Engineer (Junior) GENERAL SUMMARY: Seeking candidate with experience as an electrical engineer in a professional setting. Requirements: Minimum Education: Bachelor of Science (BS) Degree in Electrical Engineering or Computer Engineering from an accredited college or university Minimum Experience: -0-3 years of professional experience as an Electrical Engineer -One year of professional experience tracing signals and diagnosing or isolating cause for electrical failures -One (1) year of professional experience reading, understanding, and interpreting electrical schematics -One (1) year of professional experience generating write ups that detail testing performed, troubleshooting steps, and findings -One (1) year of professional experience using a digital multimeter to conduct troubleshooting hardware systems -One (1) year of professional experience using a personal computer to conduct troubleshooting and complete work product tasks Two (2) years of relevant experience in systems engineering, design, assembly, testing electronics designs in a new product development environment Design and development of embedded firmware, digital circuitry, and analog circuitry PCB Layout using CAD Design Tools Device testing, performance measurements to evaluate results

Job Description We are offering an exciting opportunity for a Senior Traffic Engineer in the Transportation Department of our Mount Laurel, NJ, office. The successful candidate will provide traffic analysis and design capabilities and assistance with highway/civil design efforts. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Provide traffic signal/electrical designs, • Perform intersection and roadway capacity analyses using HCS, Synchro, and SimTraffic software, • Perform crash and Highway Safety Manual analyses, • Provide design and development of conceptual construction staging alternatives and development of traffic control and traffic signing and striping plans, • Provide Staffing Augmentation Services for various State and Municipal clients, • Bachelor of Science in Civil Engineering (BSCE), • PE license, • Six to fifteen years of experience, • NJDOT Signal Design experience, • Traffic analysis experience, • Able to create a professional deliverable using client standards We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Full-time role based in Philadelphia, PA, Newark, NJ, or Albany, NY areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job DescriptionLineman - Construction Coordinator - Western Pennsylvania and Surrounding Areas Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering has been driven by this core purpose for more than 50 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Orbital is seeking a Lineman to serve as an Electrical Construction Coordinator (Electrical Distribution) for our Electric Services Construction Coordinator Program to support projects in Eastern Pennsylvania. We are primarily seeking candidates with overhead distribution line experience who reside in the eastern half of Pennsylvania. The role will entail planning and coordinating construction activities for a designated project to ensure the goals and objectives of the project are accomplished within the project schedule and budget constraints by performing the duties listed below. Each Coordinator is assigned to one specific project for an extended period of time. The assigned project area can be located anywhere within the client’s Electric Services territory. Projects are assigned to Coordinators based on geographical location, skill level, and experience. Responsibilities include but are not limited to: • At all times, provide safety oversight in an effort to ensure compliance with all safety procedures at site. Report safety compliance issues and safety incidents to client’s construction manager and Orbital supervisor. Work with construction supervision and on-site safety personnel to stop unsafe construction activities., • Prior to construction, participate in construction activity planning, pre-construction drawing reviews, and overall constructability reviews. Inspect construction site and complete pre-construction checklist tasks. Ensure necessary permits (local, state, environmental, etc.) and site/job specific plans (environmental, safety, etc.) are in place, signed, and posted at the job site., • During construction, inspect work to ensure that all safety and environmental policies are being followed and that the project is being constructed per the applicable specifications, drawings, and permits. Manage communication with construction crew(s), client project manager, and engineering to resolve all queries (Requests for Information or RFI’s) that may inhibit construction progress., • During construction, identify field-purchased material needs and communicate those needs to the client Construction Manager in writing. Order materials and rental equipment as necessary and coordinate deliveries. Inventory materials and identify shortages as the project progresses in order to prevent delays in schedule., • During construction, prepare Daily Log Reports that indicate progression of project to outline deficiencies in schedule, track completed construction activities, highlight safety incidents, and monitor compliance of work with specifications/drawings., • During construction, perform other miscellaneous duties including maintaining redline construction drawing markups, completing weekly safety audits, communicating scope changes, confirming utility locates, and signing crew timesheets., • HS Diploma or equivalent, • 5 Years Relevant Construction / Maintenance Experience, • Bachelor’s Degree in Construction Management or Similar, • Experience in Commercial / Industrial T&D or Experience in Management Preferred, • May have a background in structural, mechanical, or electrical (preferred) construction / engineering but must at a minimum be familiar with construction prints/drawings., • OSHA 10 hour and MEA specific training is beneficial, • Must exhibit strong written and verbal communication capabilities., • Must be competent in basic computer programs (Microsoft Office Suite and Adobe)., • Must be organized, self-motivated, and detail oriented., • Must be able to work well in a group setting and manage simultaneous tasks., • Must be willing to travel as needed. Travel and lodging costs are reimbursable., • Must possess a valid driver’s license and personal vehicle to frequent construction sites. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions. CON00002058 #LI-CV1

Job DescriptionSalary: $72,000 -$95,000/year Technical Trainer Bovio Rubino Service is seeking a knowledgeable and organized teacher to join our team as a Technical Trainer. In 2021, two South Jersey family-owned and operated HVAC, plumbing, and electrical companies, with over 90 years of combined experience in the industry, came together to create Bovio Rubino Service, your trusted choice in South Jersey for heating, cooling, plumbing, and electrical services. The S.M.A.R.T. values that are at the core of everything we do here at Bovio Rubino Service will ensure that you are making a S.M.A.R.T. choice when it comes to finding your next work family. Support each other in a positive & encouraging way Meet & exceed client needs & expectations Always do what is right Respect our client's homes & businesses Treat team members and clients as if they were family Work Schedule: As a Technical Trainer, you will work Monday through Friday 7:00 a.m. - 4:00 p.m. with additional hours, nights and weekends as needed. Pay: As a Technical Trainer, you will be paid $72,000 - $95,000/ year depending on experience. As a Technical Trainer, you will: • Develop and deliver HVAC and plumbing training programs on HVAC and plumbing installation, service, troubleshooting, and safety procedures, • Evaluate field staff performance, provide feedback, and track skill progression, • Perform daily site visits to ensure that field staff are living up to Bovio Rubino standards, • Support field staff by serving as a primary line of contact to answer any technical questions that they may have, • Stay current with all HVAC and plumbing laws, codes, technologies, and best practices, • Track and investigate callbacks for areas of staff or team improvement and additional training opportunities, • Communicate with manufacturers to resolve product issues At Bovio Rubino Service, you will find: • A company culture dedicated to employee growth through training and support, • Weekly pay, • 8 health insurance plan options, • Health Savings Account option with employer contribution, • Employer paid life insurance, • Dental/vision, short-term disability and long-term disability insurance options, • 401(k) with 4% company match after 6 months, • 7 paid holidays, • Paid time off that increases based on tenure, • Company-provided vehicle and laptop, • Discounted HVAC and plumbing repair services and free HVAC maintenance services, • A wide range of other benefits that assist our employees with their health, wealth, and happiness You could be a great fit as a Technical Trainer with Bovio Rubino Service if you have: • 10+ years of HVAC and plumbing experience, • 3+ years of experience in an HVAC field supervisor or leadership role, • 3+ years of training and/or teaching experience, • Valid drivers license with insurable driving record, • Familiarity with a wide range of HVAC equipment and troubleshooting techniques, • Full understanding of all local HVAC codes, • Knowledge of sheet metal practices, • Full understanding of air flow principles, • Understanding of manual J & D, • Ability to create layouts and designs and effectively communicate a complete HVAC system installation to installers, • Customer service skills, • Proficiency with computers, • Advanced communication skills with team members If you would like to learn more about Bovio Rubino Service, please visit us at .

Job DescriptionSalary: $80,000-$100,000 annual base salary DOE Location:Haddonfield, NJ - & occasional travel to client sites in NJ. Job Type:Full-Time How you'll get to contribute::We are in search of highly motivated and capable individuals with experience in clean energy & energy efficiency implementation. In this role you will be challenged to help navigate and implement a major energy provider's green energy initiative. Responsible for the stewardship of utility ratepayer dollars and the overall improvement of our community. The position will include both desk responsibilities reviewing and organizing energy efficiency incentive applications, as well as field visits to confirm proper implementation. The position will also entail conducting virtual and on-site training sessions amongst internal peers and contractor network, as well as identifying energy saving opportunities for various Commercial and Industrial facilities. In addition, managing incentive applications through their lifecycle is a key component to the position. mcfa Core Values (LEADS): * • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) Who you are: • 5-10 years of work experience in HVAC design, energy engineering, or similar consulting engineering work., • Demonstrated excellence in communication (written and oral) in English., • Understanding of one or multiple segments of building systems (mechanical, electrical, plumbing, architectural, structural) a plus., • Proficiency with Microsoft Office Suite applications., • Ability to interface with customers and contractors., • Ability to host and prepare training materials and presentations., • Ability to manage projects around deadlines, milestones and, • Must have a vehicle to be able to commute from New Brunswick, NJ to Company HQ in Haddonfield, NJ on occasion., • Must establish or be a New Jersey resident. Preferred Qualifications: • Prior experience with energy rates or calculations., • Bachelor's Degree in Mechanical, Electrical, or Energy Engineering. Other degrees or education qualifications may be considered with applicable work experience., • Certified Energy Manager (CEM) or Professional Engineer (PE) highly desired., • Prior design-build and/or performance contracting experience is a plus. mcfais an Equal Employment Opportunity Employer.mcfadoes not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in whichmcfamaintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job DescriptionDescription: Software Engineer At B&A, we foster and embrace a distinct set of values that we live by and instill in all aspects of our organization: dedication, commitment, partnership, trust, and recognition. We have incorporated these values into successful delivery for our customers since 1988. B&A believes in ensuring its employees feel deeply connected to B&A, recognizing successes and hard work, and providing continuous opportunities to learn and grow. Our people are entrepreneurial thinkers that combine mindset, vision, and experience to drive value – not only to us as an organization, but to the clients we support. We promote a collaborative culture with our clients, and with each other, as one team working towards a common vision. We’d love for you to join our team! Job Summary B&A is looking for a Software Engineer to join a contract with a federal government client in support of an important mission. In this role, you will contribute to the design, development, and deployment of high-quality software solutions. The ideal candidate will excel in collaborative, fast-paced environments, applying modern software development practices such as Agile, DevOps, and DevSecOps. This role offers the opportunity to work on high-impact projects where innovation, adaptability, and technical excellence are highly valued. Responsibilities • Design, develop, test, and maintain software applications in accordance with project requirements and best practices., • Apply Agile, DevOps, or DevSecOps methodologies to improve development workflows, CI/CD processes, and delivery timelines., • Collaborate with cross-functional teams to plan, implement, and deploy software solutions., • Participate in code reviews, documentation, and knowledge-sharing activities to ensure quality and maintainability., • Troubleshoot and resolve software defects and performance issues in a timely manner., • Master’s Degree (MS) in Electrical Engineering, Computer Engineering, Computer Science, Information Technology, or Information Systems., • 5+ years of professional software engineering experience., • 3+ years applying modern development methodologies, including Agile, DevOps, or DevSecOps, in professional or academic settings., • Strong proficiency in software development using modern programming languages and frameworks., • Hands-on experience with Agile, DevOps, or DevSecOps practices, including CI/CD pipelines., • Solid understanding of iterative development, version control systems, and collaborative workflows., • Ability to troubleshoot, debug, and optimize software for performance, reliability, and security., • Agile Developer or Certified Scrum Developer certification., • Familiarity with security-focused development practices and DevSecOps principles., • Experience contributing to high-impact, mission-critical projects in fast-paced environments. Notable Clients B&A has grown to be a company that is trusted by our clients for exceptional service, innovative solutions, and inspired employees. Our service extends through federal, state, and local Government, the private sector, and higher education. Some of our notable clients include Department of Homeland Security, U.S. Customs and Border Protection, U.S. Senate, U.S. Courts, U.S. Census Bureau, U.S. Navy, and more. Benefits and Programs B&A is proud to offer three robust individual and family medical plans to full time employees, including a Health Savings Account (HSA) option as well as two tiers of dental coverage, vision, life & AD&D, disability, accident, hospital indemnity, and critical illness insurance. In addition to these benefits, B&A employees enjoy paid time off, B&A sponsored trainings and certifications, pet insurance benefits, commuter transit benefits and a free subscription to a virtual exercise platform (NEOU). B&A’s 401(k) plan is available to all employees and includes a company matching contribution. B&A has launched several programs to focus on employee engagement, wellness, and assistance. These include: • The B&A Cares program: 30/60/90-day wellness check ins, personal development, financial management, and stress management seminars, and more, • A formal mentorship program, • Job shadowing and cross training opportunities, • Brand Ambassador program, • Employee Assistance Program (EAP) - Access to various support resources to include counseling, legal guidance, financial planning, and more, • Monthly teambuilding events EEO B&A provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. B&A complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy covers conduct occurring at B&A’s offices, and other workplaces (including client sites) and all other locations where B&A is providing services, and to all work-related activities. EEO is the Law B&A participates in e-Verify. We provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee’s I-9 Form to confirm work authorization. Requirements:

Job Description At Compu Dynamics, we don't just build infrastructure—we create the backbone of the digital future. As North America's premier technology infrastructure design-build partner, we design, construct, and maintain mission-critical data centers for some of the world's most innovative companies. With roots in one of the fastest-growing data center markets in the world, our growth is as intentional as our impact. Summary/Objective: The Field Service Engineer is responsible for providing onsite technical services to customers in support of mission-critical data center systems. This role delivers installation, startup, commissioning support, and both remedial and preventative maintenance services for advanced liquid cooling equipment. Acting as a trusted technical resource, the Field Service Engineer supports customers throughout the full service lifecycle, ensuring reliable, high-performance operation of mission-critical infrastructure in AI/HPC environments. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Installation, Startup & Commissioning • Participate in system deployment projects by delivering installation, startup, and commissioning support services for mission-critical liquid cooling systems., • Assist with troubleshooting and fault isolation of programmable logic controllers (PLCs), electromechanical systems, networking, and cooling equipment during deployment., • Respond onsite to dispatches for scheduled and unscheduled service requests within the timeframes defined by customer service level agreements (SLAs)., • Provide onsite technical support, including troubleshooting and repair of electro-mechanical equipment, controllers, sensors, actuators, pumps, and related systems., • Maintain accurate and timely customer service records and reports within the service management platform., • Recommend improvements to product manuals, operational processes, and field service procedures based on field insights., • Contribute to the creation and refinement of service bulletins, procedures, and technical documentation., • Support the development of training course content and provide technical training to customers and other field service personnel as required., • Partner with sales and business development teams as a technical resource to support customer engagements and solution development., • Participate in process improvement initiatives and the development of new service offerings., • Provide field feedback to engineering, product, and service leadership to support continuous improvement of systems and support models. Competencies: • Strong technical troubleshooting and problem-solving skills with sound judgment., • Ability to diagnose and resolve root causes effectively and efficiently., • Excellent customer service, communication, and relationship-building skills., • Ability to interpret technical drawings, schematics, and specifications., • Proficiency in prioritizing tasks and managing multiple service requests., • Flexibility to travel 25%–75%, occasionally with short notice., • Ability to work independently in the field and collaboratively within a team., • Willingness to work extended hours and participate in a 24/7 on-call rotation., • Ability to meet all customer-specific background and security requirements. Supervisory Responsibility: This position has no supervisory responsibilities. Work Environment: This role involves work in customer data center environments and may require exposure to equipment rooms, mechanical spaces, and field conditions. Standard PPE and adherence to safety protocols are required. Travel: This position requires travel up to 50% of the time on average, including occasional travel with limited notice. Physical Demands: • Prolonged periods of standing, lifting, bending, kneeling, and working within customer facilities., • Ability to lift up to 75 pounds., • Capacity to traverse active data center environments and respond to physical service requirements as needed. Position Type: This is a full-time, exempt position. Hours may vary depending on customer needs and project requirements. Required Education and Experience: • Minimum 5 years of experience in field service or a similar technical support position., • Prior experience working within data center environments., • Experience reading and interpreting mechanical and electrical schematics., • Experience working with 124/208 VAC and 48 VDC systems., • Demonstrated experience troubleshooting and repairing electro-mechanical equipment, controllers, sensors, actuators, pumps, and related systems. Preferred Education and Experience: • Associate degree in an IT hardware-related discipline from a two-year college or technical school (or equivalent combination of education and experience). EEO Statement: Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type will not be tolerated. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Compu Dynamics Pay Range$65,000—$105,000 USD Compu Dynamics offers a comprehensive benefits package that supports the health, well-being, and growth of our team members. Full-time employees are eligible for: * Medical, Dental, and Vision Insurance – effective the first of the month following hire, with plans currently offered through Cigna. * 401(k) Retirement Plan – automatic enrollment at 3% on your date of hire; company match up to 4% (with a 7% contribution needed to receive the full match), plus profit-sharing opportunities. * Employer-Paid Life Insurance – coverage equal to 1x your salary. * Short-Term Disability (STD) – fully paid by Compu Dynamics. * Voluntary Benefits – including Long-Term Disability, supplemental life insurance (employee, spouse, children), Accident, Critical Illness, and Hospital Indemnity coverage. * Paid Time Off (PTO) – accrue up to 160 hours (4 weeks) annually, beginning after 60 days of employment. * Paid Holidays – 7 company-observed holidays plus a floating holiday. * Birthday Time Off – 8 hours of paid time off during your birthday month. * Paid Parental Leave – 8 weeks maternity leave and 2 weeks paternity leave, concurrent with FMLA. * Volunteer Time Off (VTO) – 40 hours annually for community service. • Boot Reimbursement – up to $150 annually, available from your first day. Tool Reimbursement – $250 annually, available after 60 days. * Tuition Reimbursement – up to $5,000 annually for approved educational programs. Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. All employment offers are contingent upon successful completion of our pre-employment drug screening, background/criminal check, and motor vehicle check.

Job Description Electrical Engineer - Philadelphia PA Our client is a Engineering Design Company that has a national footprint and specializes in MEP critical facilities design. They provide design, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing electrical systems specifically for mission critical data centers. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. Working and communicating with internal team and clients effectively is a must. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for small to medium sized data center facility design projects, • Develop electrical construction documents utilizing primarily AutoCAD MEP and Revit MEP, • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Production Engineering also available if field work is not your thing, • Work with Management to respond to RFPs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • 2-10 years experience, • Bachelor's Degree in Electrical Engineering, • EIT / Licensed PE a Plus, • LEED AP a plus, • Revit experience a Plus, • Experience developing Revit MEP and AutoCAD MEP models, • Experience with Electrical Power Systems such as UPS (Uninterruptible Power Supply), Generators, Switchgears, and Batteries is required., • Experience working on complex facilities design for Data Centers Mission Critical a plus, • Light travel as needed, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well and work well in a team environment After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Residential Apartment Maintenance Supervisor Essential Duties and Responsibilities: • Work with the on-site team in managing all maintenance-related repairs and upkeep of the property., • Manage the make ready process to ensure apartments are prepared for move-in in a timely fashion., • Initiate, perform & oversee maintenance projects that improve curb appeal, maintain and optimize building systems, and monitor contractor performance., • Develop scopes of work for small improvements/services and seek out qualified contractors to bid the work., • Manage expenses properly in accordance with owner goals and actively seek to minimize expenses regularly, through the proposal process and pricing negotiation, as well as the budgeting process., • Develop and maintain relationships with vendors, negotiate pricing, collaborate on approved vendor list., • Direct supervision and support for the maintenance team on a daily basis, including identifying training and development opportunities and holding the team accountable for the condition of their buildings and work areas., • Direct the Preventative Maintenance program, ensure timely completion and thorough documentation., • Adhere to all local, state and federal housing rules, • Create and motivate a team that focuses on customer service and curb appeal on a daily basis., • Other duties as assigned., • HVAC and/or CFC certifications REQUIRED (or other applicable designations), • Must have working knowledge of NSpire inspection., • Must have excellent plumbing, electrical, HVAC and carpentry knowledge, • Experience with supervising others, • Extensive knowledge of residential building systems a must, including but not limited to, boilers, chillers, cooling towers, air handlers, condensing units, roof fans., • Professional building system licenses are preferred and may be required based on the building type of the assigned property., • Proficient using maintenance related programs, Microsoft Word, Excel, email and web searches., • Excellent communication skills, including writing, proof reading skills, and speaking., • Ability to manage multiple projects and work assignments from a variety of staff and volunteers., • Excellent interpersonal skills in person and by phone and email, with high professionalism., • Successful candidates will exhibit a demonstrable passion for high quality results and a can-do attitude., • Ability to accomplish innovative projects with little supervision., • Fantastic customer service ethic and high expectations for quality. Professional Experience: A minimum of three (3) years' experience in residential property management or a related field is required. Computer skills: • Minimum of basic knowledge of computers, • Ability to use Outlook and OneSite, • Intermediate knowledge of MS Word and Excel Must be able to push, pull, lift, carry or maneuver weights of up to 50lbs. independently and 100 lbs. with assistance. Learning & Development: Maintain a commitment to ongoing personal development and career growth though career path activities provided through the corporate office and external sources as needed. This role is non-exempt and has an anticipated hourly pay rate of $23 an hour for a new employee depending on a number of relevant factors including individuals’ experience, qualifications, knowledge, skills, abilities, client/property or company budgetary limitations/guidelines, and other job-related company and market considerations. This position may be eligible to receive discretionary and/or performance-based bonuses on a spot or annual basis, which are variable depending on individual merit/performance, budgetary limitations, company performance, and other job-related factors. This non-exempt role will be eligible for overtime for all hours worked in excess of 40 per week. Full-time positions (30+ hours/week) are eligible for 2 weeks paid vacation, 1 week sick and related leave, 11 paid holidays, and health & welfare benefits as outlined on the Company’s website. To learn more about our company and our benefits, go to: Pratum prides itself on offering a competitive salary and extensive, market-competitive health and welfare BENEFITS including: • Medical, Dental & Vision, • Prescription Drug Program, • Paid Vacation & Holiday, • Paid Personal/ Sick Leave, • Company Paid Life Insurance, • Company Paid AD& D Insurance, • Company Paid Short- Term, • Company Paid Long-term Disability, • Supplemental Life Insurance, • Dependent Supplemental Life Insurance, • Educational Assistance, • Financial Planning, • Retirement Savings Plan with company matching Pratum Companies is committed to a diverse workforce and is an Equal Opportunity Employer. Powered by JazzHR ny9p7r3Y67

Job Description Position Overview We are seeking an Engineer, Scientist, or Programmer with strong Python skills to support a wide variety of analytical, computational, and technical tasks. This position is fully on-site in Doylestown Borough, Pennsylvania and requires 25–50% travel based on project needs. Work Location: Doylestown, PA 18901 (On Site) Schedule: Monday - Friday 8 hours per day Travel required 25-50% Responsibilities • Develop, test, and maintain Python-based tools, models, and analytical workflows, • Perform technical analysis, modeling, simulation, and data processing, • Support mission-driven research across multi-domain topics, • Coordinate with the owner to deliver high-quality products, • Maintain strict adherence to federal security protocols, • Must have a strong proficiency in Python programming, • 3 years of experience preferred in engineering, computer science, physics, mathematics, or related field, • Ability to obtain and maintain a U.S. government security clearance, • On-site work required in Doylestown Borough, PA, • Willingness to travel 25–50%, • Strong problem-solving and analytical skills, • Degree in Aerospace, Electrical or Mechanical Engineering, • Active security clearance (Secret or higher), • Experience supporting defense, government, or national-security missions Intensity — purposeful focus and disciplined execution Insight — clarity of thought and analytical rigor Integrity — professionalism, reliability, and ethical conduct Company DescriptionAbout Good Multi-Domain Solutions, LLC Good Multi-Domain Solutions, LLC is a small, high-performance defense and technology consulting and engineering service firm delivering impactful solutions across multiple mission domains. We maintain a strong commitment to our core values: Intensity, Insight, and Integrity. About the Founder Good Multi-Domain Solutions, LLC is led by Brandon Lowell Good, Ph.D., who served over 16 years with the Department of the Navy. In his final five years of federal service, he was a Program Technical Director in the Maritime Domain at the Office of Naval Research. The company’s current work includes supporting programs that contribute to the advancement of next-generation maritime and multi-domain platforms across several naval communities. Dr. Good focuses on delivering versatile, high-performance solutions through advanced computational analysis, streamlined development processes, and close collaboration with government and industry partners. His current efforts emphasize developing systems that combine information from multiple sources to enable more capable and adaptable platforms.About Good Multi-Domain Solutions, LLC\r\nGood Multi-Domain Solutions, LLC is a small, high-performance defense and technology consulting and engineering service firm delivering impactful solutions across multiple mission domains. We maintain a strong commitment to our core values: Intensity, Insight, and Integrity.\r\n\r\nAbout the Founder\r\nGood Multi-Domain Solutions, LLC is led by Brandon Lowell Good, Ph.D., who served over 16 years with the Department of the Navy. In his final five years of federal service, he was a Program Technical Director in the Maritime Domain at the Office of Naval Research. The company’s current work includes supporting programs that contribute to the advancement of next-generation maritime and multi-domain platforms across several naval communities. Dr. Good focuses on delivering versatile, high-performance solutions through advanced computational analysis, streamlined development processes, and close collaboration with government and industry partners. His current efforts emphasize developing systems that combine information from multiple sources to enable more capable and adaptable platforms.

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a Project Engineer to join the HVAC department at our Philadelphia office. The Project Engineer is a technically skilled and experienced engineer with excellent communication, coordination, project management and leadership skills. The Project Engineer is expected to proactively coordinate, communicate, problem solve across disciplines, and exhibit the ability to balance the client relationship with an understanding of the project’s financial goals. As a Project Engineer, you’ll play a key role in managing and executing electrical engineering projects from design through completion. You’ll collaborate across disciplines, communicate directly with clients, and help ensure that both technical excellence and project financial goals are achieved. Key Responsibilities • Leads the design on Tenant fit-out projects and is a key designer on base building/infrastructure upgrades; assembles riser diagrams, schedules, and floor plans; participates in specification writing., • Assists in establishing design criteria from the project proposal and assembles basis of design documents., • Assembles a complete set of contract documents for their trade including the lay out main equipment rooms, closets, shafts, risers, etc., • Leads design for their trade’s ancillary systems required for a project and can assemble scope associated drawings with these systems (e.g., UPS, generators, fuel oil, secondary water pumps, water reclamation system, etc.)., • Reviews shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately., • Bachelor’s degree in mechanical or electrical engineering, • 3-6 years of experience, • Excellent oral and written communication skills, • Proficient in all design calculations and software tools (e.g., Revit and AutoCAD) applicable to their discipline, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades, • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications) Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $93,000-$100,000 a year Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR 4M3hh6IH2N

Job Description Directly reports to the General Manager. Functionally responsible for maintaining all manufacturing equipment and components at Almag Aluminium. As a member of the Maintenance team, openly shares knowledge and information including training of teammates. Duties & Responsibilities • Accountable for all mechanical, fluidic, welding and plant equipment maintenance with minor electrical troubleshooting to ensure minimal downtime., • Work with minimal supervision in a safe manner maintaining a clean and orderly shop., • Respond to break-downs immediately and /or provide communication for repairs., • Openly share knowledge and train team mates on equipment functionality and history, procedures, and drawing mark ups., • Coach Operating personnel on equipment capability, limitations and preventative measures to improve equipment reliability., • Follow and take initiative as directed in PM program including improving the program itself., • Maintain the inventory of spare parts though initiating purchase request, orderliness of the racks and parts., • Troubleshoot Hydraulic systems including Pneumatic and Electrical circuits., • Repair, Overhaul, Fabricate, Assemble, and dismantle equipment using power tools, hand tools, machine tools and welding tools., • Operate and maintain machine tools such as a Lathe, Milling machine, Drill press and various cutting tools to fabricate machine parts to dimensional specifications., • Independently weld and fabricate in order to repair machinery and improve production., • Monitor equipment performance, document and evaluate potential problems for root cause solutions and improvements., • Focus on continuous improvement of equipment performance to improve efficiency., • Must communicate effectively with all plant personnel., • Comply with all ISO and quality related policies, procedures and system requirements. Education/Experience • Completion of a formalized Millwright Training Program or equivalent technical diploma, • Minimum of 5 years’ experience as a Millwright/Maintenance Mechanic in related industrial maintenance, • High energy level, good creativity, self-confidence, time management and must be a team player, • Training or experience in troubleshooting related industrial maintenance machine’s Technical Skills/Competence • A strong understanding of hydraulics and Pneumatics is essential, • Exposure to Electrical Controls and PLCs (Allen Bradley) would be a strong asset, • Welding and Fabrication experience, • Ability to read Electrical and mechanical drawings and schematics, • Profit Sharing, • Education Assistance Program, • Social Events, • Safety Shoe and Glasses Allowance, • Internal Growth and Development, • Health and Dental, • Life and AD&D, • Vision, • Critical Illness Insurance, • Long Term Disability

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job DescriptionCompany Description CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description Launch your career with purpose at CRB. As an Automation Intern, you won’t just observe, you’ll contribute meaningfully to real-world projects that support the design and construction of advanced facilities for clients in the life sciences and food & beverage industries. As a leader in the AEC industry, CRB delivers integrated solutions that bring these facilities to life, and our internship program is designed to immerse you in that process. You’ll gain hands-on experience with automation technologies such as PLCs, SCADA systems, and process controls, collaborate across disciplines, and bring fresh ideas to the table — all while building lasting relationships and experiencing our dynamic, people-first culture. This is more than an internship; it’s your opportunity to grow, make an impact, and help deliver facilities that produce life-changing therapies and feed millions around the world. Responsibilities • Developing project documents (e.g., calculations, reports, construction drawings and specifications, etc.) for clients in coordination with regulatory bodies and industry standards., • Assisting with development of conceptual designs and coordinating with the design team under direction of the project team lead., • Coordinating with other disciplines and other internal and external team members (e.g., vendors, clients, and contractors).Qualifications Qualifications: • Currently pursuing a Bachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, or Architectural Engineering from an accredited program, • Proficiency in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, OneNote), • Strong interest in the Food & Beverage or Life Sciences industries, • Excellent problem-solving skills with the ability to analyze complex data and develop actionable insights, • Strong communication and collaboration skills, with the ability to work effectively across disciplines and with internal and external stakeholders (vendors, clients, contractors), • Eagerness to learn about the AEC industry and apply academic knowledge to real-world engineering applications, • Working towards Fundamental of Engineering Exam registration or completion preferred, • Familiarity with Engineering Software Application including computer aided drafting, process modeling and calculations programs, • Familiarity with industry-specific regulations and standards within the AEC industry, • Prior internship or co-op experience in Electrical Engineering or related field Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.