Electrical jobs in San Jose, CaliforniaCrear alertas

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Honeywell Pro-Watch Access Control, • Genetec VMS, • LifeSafety Power Systems, • Axis, • Bosch IP Cameras, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

About the Role: The Assistant Project Manager will work with an existing project team, involved in current construction projects. The Assistant Project Manager will assist a Project Manager and continue their development under the direction of CSI. Successful candidates must have a minimum of three years of experience as a Project Engineer and display company core values as found in the CSI Orientation Packet. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We’re proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Understand and follow CSI policies and procedures, • Manage document control and drawings, • Prepare submittals and shop drawings, and review quoted items and commodities, • Compose CSI RFIs, manage RFI logs, and review RFIs for cost impact, • Manage POs, vendor tracking, and releases, • Assist with electrical take-offs and project estimating of large jobs, • Work with the pre-fab department on an as-needed basis, • Provide field foremen with information, material tracking, and other administrative functions, • Summarize and track time and material paperwork, • Take ownership and accountability for assigned tasks, • Manage and track subcontracts, • Assist Project Manager(s) with reports and job schedule review, • High School Diploma or the equivalent, • AA/BS in Construction Management, Business, or Engineering (or soon to graduate) (*), • Estimating experience: Accubid preferred, • Proficiency in MS Office Suite, BlueBeam, and understanding of AutoCAD and Revit, • Proactive attitude, showing initiative and the ability to work independently, • Ability to read and understand Architectural, Structural, Mechanical, Electrical, and Plumbing drawings, • Ability to take ownership and accountability, • Excellent reasoning ability, • Strong organizational and communication skills, both written and verbal, • Ability to work under pressure and adapt to changing job requirements, • Dependability and punctuality for all CSI activities, • Ability to work in a team environment and display leadership skills, • Frequently works outdoors on uneven surfaces., • May be required to sit or stand for long periods of time., • Works in a climate controlled environment 50% of the time., • May work in varying weather conditions: hot, cold, and wet conditions., • Frequently works in areas with large industrial equipment subject to high noise levels., • Salary $70,000-$125,000 / year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents., • Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s) Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

About the Role: The Project Manager provides overall decision making and project management support for the field, upper management, and customer to ensure job profitability on multiple projects of varying scope and size. Successful candidates must have over five years of experience managing electrical construction projects and display company core values as found in the CSI Orientation Packet. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We’re proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Plan, organize, and execute all aspects of the project, • Determine and coordinate all necessary project resources, • Make decisions on project(s), • Function as the liaison between the field and the client(s) to facilitate effective construction activities, • Prepare and track job quotes and bid packages, • Coordinate with Engineering Department on Design-Build work and obtain Plan Check Approval, • Review contracts, trade specific work, and insurance documents (OCIP/ CCIP/ PLA), • Identify, create, and negotiate all change orders in a timely manner, • Maintain all progress tracking logs and manage releases of lighting gear and controls, • Direct, train, and mentor a Project Engineer or Assistant Project Manager, as applicable, • Collaborate with field supervision and internal support resources to ensure the project stays on schedule and maximizes profitability, • Coordinate, attend, and/or lead all project related meetings, i.e., Team Meetings, CSI Job Strategy Process Meetings and Customer/Client Meetings, etc., • Prepare for and attend monthly Project Reviews with upper management, • Review Job Reports and create monthly cost and billing projections, • Oversee Billing Processes and actively work to maintain a healthy cash flow position, • Prepare weekly Friday Letters for clients, providing project status updates, • Monitor and approve all job-related cost expenditures, • Manage and track subcontractors, • Maintain an active role in project safety in conjunction with CSI’s safety team, • Estimating experience: Accubid preferred, • A Bachelor’s degree in a construction, engineering, or business related field from an accredited college or university preferred (*), • A minimum of five years in the electrical construction trade, with a strong knowledge of construction sequencing, construction methods, and materials practices; including knowledge of electrical systems (*), • Proficiency in MS Office Suite, BlueBeam, and understanding of AutoCAD and Revit, • Proactive attitude and initiative, • Excellent reasoning skills, • Ability to read and understand Architectural, Structural, Mechanical, Electrical, and Plumbing drawings, • Knowledge of, and compliance with, all electrical codes, Local Union Labor Agreements, and State Compliance Laws/Regulations, • Ability to take ownership and accountability, • Strong organizational and communication skills, both written and verbal, • Ability to work under pressure and adapt to changing job requirements, • Strong understanding of complex and technical electrical construction and management practices, • Ability to work in a team environment and display leadership skills, • Frequently works outdoors on uneven surfaces., • May be required to sit or stand for long periods of time., • Works in a climate controlled environment 50% of the time., • May work in varying weather conditions: hot, cold, and wet conditions., • Frequently works in areas with large industrial equipment subject to high noise levels., • Salary $120,000-$150,000/ year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

About the Role: The Senior Project Manager is ultimately responsible for the overall direction, completion, and financial outcome for projects of varying size. The Senior Project Manager leads a project management team to deliver exceptional results for our clients, while proactively developing new business opportunities and relationships with current and potential customers. Successful candidates must have over ten years of industry experience and display company core values as found in the CSI Orientation Packet. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We’re proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Establish project objectives, policies, procedures, and performance standards to mitigate risk and ensure project success and profitability, • Make difficult decisions regarding projects and the allocation of project resources, • Assume ultimate responsibility for the outcome of projects, • Effectively supervise a team in the day to day management of projects, • Train a project management team in CSI company philosophy and systems, • Effectively supervise the maintenance of project required logs and tracking systems and take corrective measures as necessary, • Maintain all logs required to track the progress of the project, • Function as a liaison between the field and the client(s) to facilitate effective construction activities, • Monitor construction activities in conjunction with the General Foreman and/or onsite Foreman to ensure the project is being built on schedule and within budget, • Investigate any potentially serious situations and implement corrective measures, • Represent company/project in meetings with client, subcontractors, etc., • Manage subcontractor activities including associated costs, schedule, and related change orders, • Estimate projects as needed, • Prepare for and attend monthly financial reviews and accurately project profitability to upper management, • Manage financial aspects of contracts to protect the company’s interest and maintain strong relationship with the client, • Engage in and promote business development, • A Bachelor’s degree in a construction, engineering, or business related field from an accredited college or university preferred (*), • A minimum of ten years’ experience in project management, preferably in electrical construction (*), • Knowledge of construction technology, scheduling, equipment, and methods required (*), • LEED AP, PE, and OSHA 30 certifications are desired but not mandatory, • Estimating experience: Accubid preferred, • Proficiency in MS Office Suite, BlueBeam, and understanding of AutoCAD, and Revit, • Proven experience mentoring and managing others, • Positive, proactive attitude and strong customer focus, • Ability to read and understand Architectural, Structural, Mechanical, Electrical, and Plumbing drawings, • Extensive knowledge of, and compliance with, all electrical codes, Local Union Labor Agreements, and State Compliance Laws/Regulations, • Strong organizational and communication skills, both written and verbal, • Ability to work under pressure and adapt to changing job requirements, • Strong understanding of complex and technical electrical construction and management practices, • Ability to interact effectively and professionally with all levels of employees, both management and staff alike, as well as vendors, clients, and others, • Ability to understand and follow standard operating policies and procedures, • Ability to perform duties in a professional manner and appearance, • Frequently works outdoors on uneven surfaces, • May be required to sit or stand for long periods of time, • Works in a climate controlled environment 50% of the time., • May work in varying weather conditions: hot, cold, and wet conditions., • Frequently works in areas with large industrial equipment subject to high noise levels., • Salary $120,500-$182,200/ year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. . MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

About the Role: The Project Engineer will work with an existing project team, involved in current construction projects. The Project Engineer will assist a Project Manager and continue their development under the direction of CSI. Successful candidates must display company core values as found in the CSI Orientation Packet. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We’re proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Understand and follow CSI policies and procedures and assist with the following:, • Managing document control and drawings, • Obtaining necessary permits, • Electrical take-offs and project estimating, • Preparing submittals and shop drawings, and reviewing quoted items and commodities, • Managing RFI logs and reviewing RFIs for cost impact, • Managing POs, vendor tracking, and releases, • Working with the pre-fab department on an as-needed basis, • Providing field foremen with information, material tracking, and other administrative functions, • Summarizing and tracking time and material paperwork, • Taking ownership and accountability for assigned tasks, • Managing and tracking subcontractors, • Preparing reports and schedule review for Project Reviews, • Estimating experience: Accubid preferred, • High School Diploma or the equivalent, • AA/BS in Construction Management, Business, or Engineering (or soon to graduate) (*), • Proficiency in MS Office Suite, and BlueBeam, • Proactive attitude, showing initiative and the ability to work independently, • Ability to read and understand Architectural Structural Mechanical Electrical and Plumbing drawings, • Excellent reasoning ability, • Strong organizational and communication skills, both written and verbal, • Ability to work under pressure and adapt to changing job requirements, • Dependability and punctuality for all CSI activities, • Ability to work in a team environment and display leadership skills, • Frequently works outdoors on uneven surfaces., • May be required to sit or stand for long periods of time., • Works in a climate controlled environment 50% of the time., • May work in varying weather conditions: hot, cold, and wet conditions., • Frequently works in areas with large industrial equipment subject to high noise levels., • Hourly Rate $24.04-$36.06/ hour (Non-Exempt), • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

Champions Do More \n \n\n \n As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. \n \n\n \n Responsibilities \n \n\n \n • Medical Insurance\n \n, • Dental Insurance\n \n, • Vision Insurance\n \n, • Group Life Insurance\n \n, • Disability Insurance\n \n, • 401k Retirement Plan with match\n \n, • Referral Bonus (“Cash From Crash”)\n \n

Location: Holly Hill Cement Plant SC Job Req ID: 14199 Join our amazing team and contribute as a: \n Electrical Supervisor ABOUT THE ROLE Plan, schedule and oversee the execution of all electrical maintenance activities in the plant in order to maximize equipment utilization and reliability Relocation assistance provided for candidates outside this area. WHAT YOU'LL ACCOMPLISH \n\n • Ensure that all electrical work performed either by the electrical/instrumentation technicians or outside contractors is performed in a safe manner and meets all applicable regulations.\n, • Lead the Electrical Safe Work Practices (ESWP) and Energy Isolation (EI) programs.\n, • Oversee the maintenance of process instrumentation to ensure proper environmental compliance.\n, • Oversee the maintenance of quality instrumentation to ensure proper quality control.\n, • Keep the Maintenance Manager informed of all electrical department issues including union issues, budget compliance, equipment reliability, and inter-department coordination.\n, • Develop and maintain the electrical and computer control system Predictive / Preventive Maintenance program.\n, • Daily monitoring of the plant electrical equipment to ensure reliability through physical inspections and process monitoring.\n, • Prioritize, plan, schedule and assign electrical and control system work, and coordinate this work with the other departments.\n, • Follows-up on the effectiveness of the work performed and initiates corrective measures where necessary.\n, • Maintain electrical documentation including but not limited to master equipment files, regulatory compliance files, equipment specifications, and repair history.\n, • Assist in the development of the electrical budget and maintain compliance to the budget.\n, • Work with the PLT to determine improvement activity priorities and budgeting.\n, • Evaluate computer control equipment and their components to assure they meet the plant requirements.\n, • Define, write and implement process control programs.\n, • Provide control system training and guidance for plant personnel.\n, • Troubleshoot control system hardware and software problems.\n, • Manage the improvements documentation.\n, • Actively manage the plant's improvement activities and support CAPEX as needed.\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.\n\n WHAT WE'RE LOOKING FOR Education: Technical degree or 8 years of equivalent experience. Required Work Experience: Minimum 5 years of electrical supervision and project experience, PLC programming experience and knowledge of HMI systems. Required Computer and Software Skills: SAP, MS Office Additional Requirements: \n\n • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n WHAT WE OFFER \n\n • Competitive salary \n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings \n, • Medical, Dental, Disability and Life Insurance \n, • Holistic Health & Well-being programs \n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays \n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Job DescriptionPrincipal Customer Applications Engineer Location: Colorado Springs, CO or San Jose, CA Comp: Base $150-200k + 30% bonus + VERY generous stocks totaling up to $500k! --- We're seeking an experienced Project Manager ready to transition into a Principal Customer Applications Engineer role. If you have proven client-facing experience leading integration projects for hardware/software solutions-ideally in the semiconductor industry (though we welcome expertise from any hardware and software products company)-and you're passionate about driving technical success for customers, then please read on! --- Introduction A global infrastructure tech provider delivering high-performance semiconductor and enterprise software solutions that power AI workloads, data centers, and cloud platforms. Trusted for scalable, secure, and mission-critical innovation across industries. Top Reasons To Work With Us • Low stress environment with great work/life balance, • Amazing package with base, strong bonus and industry leading RSU program!, • Work for an industry leader in high growth mode with huge career growth potential What You Will Be Doing You will lead technical engagement for advanced AI projects with major cloud clients. Acting as the primary technical liaison and account partner, this role drives design adoption, product integration, issue resolution, and customer training throughout the product lifecycle. Our global team supports customers in implementing high-performance solutions for next-generation AI and compute platforms. Key Responsibilities • Lead technical engagement with strategic customers to ensure successful integration of interconnect technologies into AI and custom server designs., • Pre-design phase: Collaborate with customers to capture design requirements, align them with product roadmaps, and monitor progress toward design wins., • Post-design phase: Support new product introduction (NPI) milestones to meet customer launch timelines., • Provide architectural guidance and schematic reviews, educating customers on product capabilities and best practices., • Manage and resolve reported product issues, ensuring timely progression to final disposition and clear communication of status., • Serve as the central point of contact between internal engineering teams (systems, quality, development, performance, test, manufacturing) and external stakeholders for efficient debugging and resolution., • Coordinate technical training sessions for customer teams., • Identify and mobilize resources needed to close customer issues effectively., • Escalate critical or sensitive defects to leadership with clear action plans., • Organize and lead meetings with account teams and customers, documenting outcomes and action items., • Communicate technical feedback to marketing, product management, and engineering regarding customer designs and feature requests., • Manage expectations and deliverables, track incident metrics, and implement process improvements., • Degree in Electrical or Computer Engineering (or similar)., • Minimum 5 years of experience in one or more of the following areas: technical program management, customer application engineering, or software/hardware development involving complex customer features, troubleshooting, and solution delivery., • Knowledge of AI server platforms and system architecture., • Background in managing high-profile enterprise accounts within the semiconductor or computer hardware/software sectors., • Outstanding communication skills-clear written and verbal abilities combined with strong presentation, negotiation, and relationship-building expertise., • Proven experience in account coordination and escalation handling, including driving critical technical communications across global regions such as China and Taiwan., • Demonstrated leadership and collaboration skills, with the ability to guide projects and resolve issues effectively., • Capability to manage multiple priorities and customer-facing tasks simultaneously., • Customer-focused mindset with flexibility to support activities across different time zones., • Hands-on approach to technical problem-solving, including debugging and data analysis, and familiarity with software concepts., • Highly self-motivated and quick to learn new technologies and processes., • PCIe switch experience - nice to have NOT essential Benefits • Health, dental, and vision insurance, • Life and disability insurance, • FSA and HSA, • 401k with match, • ESPP, • Generous PTO, • Annual bonus from 15-30% (depending on your level), • VERY generous stocks! - Employer is willing to sponsor qualified candidates for a non-immigrant work visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 11/17/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionElectrical Project Manager Title: Electrical Project Manager Job Location : Santa Clara or San Francisco OR Reno OR Sacramento Salary : 100k to 165k Position Overview We are a top 10 electrical subcontractor that is rapidly growing due to our reputation! We have a ton of backlog and are looking for multiple PMs to who can manage electrical projects from inception to completion. Key Responsibilities • Lead and manage electrical projects, ensuring adherence to timelines and budgets., • Oversee financials of projects, • Cost estimating utilizing the latest software from Accubid, • Lighting design, photometry, and Title 24 compliance, • Power distribution and system architecture, • Basic procurement, • Field installation techniques, • Pre-fabrication design and implementationOur benefits, • Medical, dental, and vision care, • Profit sharing/Company matching 401k Program, • Paid vacation/sick leave, • Fully paid life insurance policy - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 05/13/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionMEP Project Manager MEP Project Manager Position Overview The MEP Project Manager is responsible for overseeing the planning, execution, and completion of mechanical, electrical, and plumbing projects. This role involves coordinating with various stakeholders, managing project timelines and budgets, and ensuring that all work is completed to industry standards and client specifications. Key Responsibilities • Lead and manage MEP project teams to ensure successful project delivery., • Develop project plans, including timelines, budgets, and resource allocation., • Coordinate with architects, engineers, and contractors to ensure effective project execution., • Monitor project progress and make adjustments as necessary to stay on schedule and budget., • Conduct regular site inspections to ensure compliance with safety regulations and quality standards., • Prepare and present project updates to stakeholders and clients., • Resolve any issues or conflicts that arise during the project lifecycle.Qualifications, • Bachelor's degree in Mechanical, Electrical, or Plumbing Engineering or a related field., • Proven experience as a Project Manager in MEP projects., • Strong knowledge of MEP systems including HVAC, piping, and electrical installations., • Excellent communication and leadership skills., • Ability to manage multiple projects and work under pressure., • Proficient in project management software and tools. - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 10/16/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Req ID: 27873 About Supermicro: Supermicro® is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us. Job Summary: Supermicro is seeking a Manufacturing Engineer to join the team for conducting the functional test for the incoming Printed Circuit Board Assembly (PCBA) products, implement Engineering Change Order, model conversion, etc. The candidate is responsible for daily operation of quality control for Supermicro products, isolate and analyze the defective PCBA products, prepare the report and work with QA team for quality improvement. The candidate can work efficiently in the fast-paced production environment to meet dynamic sale demand. Essential Duties and Responsibilities: \n • Conducting the visual inspection and functional test for the Quality Control to the PCBA products. Implement the engineering change order and model conversion.\n, • Work with QA team to follow up with manufacturing contractors for quality improvement.\n, • Work with R&D and QA team to diagnose and analyze the root cause to the defective PCBA products for quality improvement.\n, • Practice the lean manufacturing and Six Sigma for process optimization. Develop script or batch file to improve the effectiveness and efficiency.\n, • Follow the ISO guidelines to cultivate and promote the safety, quality, energy efficiency and environmental sustainability.\n, • Willing to do assigned tasks requested by the company. Support management to achieve the company business target.\n\n Qualifications: \n • BS/MS in Electrical Engineering, Computer Science or Engineering, Industrial and System Engineering, or other relevant engineering field preferred.\n, • Minimum of 2-year work experience in production or in industrial is desirable.\n, • Basic or familiar with Windows and Linux operating systems.\n, • Analytical mindset with problem-solving abilities.\n, • Good communication skills in English, including both written and verbal.\n, • Ability to work in a fast-paced environment and manage multiple tasks. Willingness to occasionally provide support beyond regular working hours in case of need.\n\n Salary Range $73,500 - $100,000 The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs. EEO Statement Supermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Job DescriptionSr Electrical Engineer, Data Center (Hybrid) Sr level Electrical Engineer Location San Jose, CA (Hybrid, 3x a week on-site) We have several roles open all different levels of experience Pay: 100k-185k base (we're hiring for all levels of experience) Position Overview We are seeking a highly skilled Sr Electrical Engineer to lead and execute electrical engineering projects, particularly in the data center sector. The successful candidate will have a strong background in designing and implementing electrical systems and will be responsible for ensuring compliance with industry standards and best practices. Key Responsibilities • Lead the design and development of electrical systems for data centers, • Conduct load calculations and power supply system analysis, • Utilize BIM tools such as Revit and BIM 360 for electrical layout and design, • Collaborate with cross-functional teams to ensure project objectives are met, • Develop and maintain project documentation using Bluebeam, • Ensure compliance with LEED and sustainability standards, • Perform high voltage system design and analysis, • Bachelor's degree in Electrical Engineering or related field, • 3+ years of experience in electrical engineering, with a focus on data centers (bonus, not required), • Proficient in electrical design software such as Revit, SKM, and BIM 360, • Experience with Building Management Systems (BMS) would be a big bonus, • Strong understanding of high voltage systems and power supply design, • PE Cert would be a bonus but not required, • LEED certification is a plus, • Medical insurance, • Vision insurance, • Dental insurance, • 401(k), • Hybrid work schedule 3x a week on-site with commuter benefits, • Disability insurance - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 07/02/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Location: Holly Hill Cement Plant SC Job Req ID: 11153 Join our amazing team and contribute as a: \n Electrical Engineer I ABOUT THE ROLE \n The Electrical Engineer will be responsible for all electrical maintenance activities at the plant. They will ensure electrical project work is completed in a safe, efficient, and timely manner and in compliance with environmental requirements and to work cooperatively to plan, schedule, and execute all control system activities in the plant in order to maximize equipment utilization and reliability. The Electrical Engineer will also be a part of the the company's Build4Growth Program. This is an extensive, 16-month cement manufacturing learning and development program designed to provide new graduate engineers with foundational knowledge and experience on the main operational areas of our cement plants. This program is built on a blended learning approach including online learning, face-to-face sessions, on-the-job assignments, and projects. WHAT YOU'LL ACCOMPLISH \n\n • Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas.\n, • Promote safety with all other employees and outside contractors.\n, • Promote electrical safety and safe work practices in the workplace with subordinates.\n, • Responsible for supervising the electrical and instrumentation technicians in the execution of daily work orders and projects assigned by the maintenance coordinator. \n, • Electrical preventive and predictive maintenance programs. This includes conducting systematic inspections on all plant electrical equipment, collection of quantitative data, its' organization and analysis using a variety of traditional as well as technically advanced diagnostic tools.\n, • Responsible for the accurate documentation of electrical schematics and stores spare parts inventory.\n, • Ensure all system programming meets with proper environmental compliance. \n, • Maintain system documentation including but not limited to master equipment files, regulatory compliance files, equipment specifications, and repair history\n, • Evaluate computer control equipment and their components to assure they meet the plant requirements.\n, • Define, write and implement changes to existing process control programs.\n, • Provide control system training and guidance for plant personnel.\n, • Troubleshoot control system hardware and software problems.\n\n WHAT WE'RE LOOKING FOR \n Education: Bachelor's degree \n Field of Study Preferred: Electrical Engineering or similar field \n Required Work Experience: 1 - 3 years Additional Requirements: \n\n • Self-starter/ highly motivated team player\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.\n, • Successful candidates must adhere to all safety protocols and proper use of company approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n WHAT WE OFFER \n This role is eligible for a $10,000 sign on bonus!! \n\n • Competitive salary\n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings\n, • Medical, Dental, Disability and Life Insurance \n, • Holistic Health & Well-being programs\n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays\n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Currently offering a $10,000 retention bonus paid out over two years. Our Diesel Mechanics start at $40.00 – $42.00/hour depending on experience! * 401K with 2% automatic company contribution plus company match up to an additional 6%. * Medical Benefits Start Day One! * We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. * Paid vacation time, sick, and personal time. * Employee uniforms provided. * Strong Safety Culture, newer equipment, and excellent local leadership. Schedule: Sunday thru Thursday with a 5:00pm start time ESSENTIAL DUTIES AND RESPONSIBILITIES * Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.). * Perform preventative maintenance within DOT standards. * Mentor other maintenance shop personnel. * Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc. * Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. * Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. * Other duties as assigned by manager. SUPERVISION: * N/A RELATIONSHIPS * Internal: All Fleet Technicians, Drivers, Coordinators and Manager * External: Dealer Service Managers WORK ENVIRONMENT * Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. MINIMUM QUALIFICATIONS * Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. * Diagnostic and troubleshooting ability using fleet maintenance software. * Successfully demonstrated independent analytical and problem-solving skills. * Must furnish own personal hand tools. * Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet. * Ability to read and understand technical and service manuals. * Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills. * Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. * Ability to adapt to changing organizational and operational needs. * Computer and software experience. EDUCATION * High school diploma or equivalent required. CERTIFICATIONS/TRAINING * Brake certification LICENSES * Must possess a valid driver's license. PREFERRED QUALIFICATIONS * JPRO software experience. * Welding ability * Knowledge with electrical schematics * Basic Microsoft Excel and Word skills. * Leadership experience or qualifications * Valid Class A CDL license and DOT certification * EPA 608 (Type 2 or Universal) certification PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): FREQUENTLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $40-$42 per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionPrincipal Design Verification Engineer We are looking for an experienced and passionate Principal Engineer / Manager to join our team. In this role, you will be responsible for hands-on technical work while creating & managing the front-to-back design for our cutting-edge wireless infrastructure SOCs, from architecture and RTL through logic design. Key Responsibilities: • Create and manage digital designs for SOCs from architecture and RTL to logic design, • Utilize tools such as Verification, Mixed Signal, Power Management, Synthesis, static timing, SystemVerilog, ATPG, Fault Grading, SCAN, Clock-domain, BIST, DFM, TCL, Python, Wireless, Amba, Protocol Bus Architecture, DFT, ARM/RISC, AXI/AHB/APB, Multi-core CPU, VHDL/Verilog and Fault Coverage Analysis, • Develop and implement strategies to improve the performance of the digital design process, • Work with stakeholders to ensure customer satisfaction and customer requirements, • Analyze and interpret digital network and system data to identify areas of improvement, • Develop and maintain documentation for processes, procedures and design standards, • Stay abreast of the latest digital design trends and techniques, • Identify areas of risk and take corrective action to mitigate them Qualifications: • MS / PhD in Electrical Engineering, Computer Engineering or related field, • Wireless communication & protocol experience - i.e. WiFi, 4G/5G, LTE, 3GPP, etc., • Proven experience in digital design, architecture, RTL, and logic design, • Hands on experience with AMBA AXI/APB/AHB protocol bus architecture specs & implementations, • Verilog, VHDL & System verilog language experience & tools like linting, simulation, formal verification, clock-domain crossing checking, etc., • ARM/RISC architecture, multi-core CPU system memory & operation hierarchy experience, • UVM/OVM methodology & language (SystemVerilog) experience, • Ability to manage multiple projects with tight deadlines, • Programming & Scripting experience - i.e. C/C++, Tcl, Python, Perl, awk, sed, etc., • Excellent leadership experience & technical capabilities, wear multiple hats, • Nice to have skills & tech include: Verification, Mixed Signal, Power Management, Synthesis, static timing, SystemVerilog, ATPG, Fault Grading, SCAN, Clock-domain, BIST, DFM, TCL, Python, Benefits Base Pay, Pre-IPO equity, Health, Dental, Vision, 401k • Employer is willing to sponsor qualified candidates for a non-immigrant work visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 07/21/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

FSE or Technician position in a semiconductor equipment company or a technical position in the engineering field) PVD or semiconductor vacuum equipment experienceMulti chamber cluster systems and robotics experience is highly preferredAbility to understand electrical and mechanical drawings for trou

Requisition ID # 167707 Job Category: Maintenance / Construction / Operations Job Level: Individual Contributor Business Unit: Electric Operations Work Type: Onsite Job Location: Cupertino Department Overview Energy Supply is responsible for managing PG&E's portfolio of owned and contracted energy resources that provides safe, reliable, cost-effective and environmentally sound energy to our customers. Position Summary This is an International Brotherhood of Electrical Workers (IBEW) Local 1245 represented classification, which has over 100 years of experience representing employees at PG&E. This job is subject to collective bargaining. This is a Journey-level position responsible for inspecting, testing, troubleshooting, repairing and replacement of electrical equipment at the hydro power generation facilities. Electricians may work indoors, outdoors and in confined spaces. Job Responsibilities \n • Conducts visual, auditory inspections and electrical testing of equipment to troubleshoot problems for repair or replacement.\n, • Identify problems and researches needed repair via manuals, manufacturer's specification and schematics; records status of equipment into tracking system.\n, • Test, repair, and install components of electrical equipment by using power tools, hand tools, and testing equipment - such work may involve climbing, working in elevated positions, tight spaces, and underground facilities -Work with chemical and chemical solutions, which includes, but not limited to, oil, grease, paint, PCB, and asbestos\n, • Records completed maintenance, repairs and inspection results.\n, • Provide quality information to be able to order required replacement parts\n, • Provides and receives technical assistance to customers, associates, manufactures and suppliers regarding standards, procedures, equipment design changes and design flaws via telephone, wireless devices, or in person.\n, • Operates pallet jack, forklift, crane, and man lift as required by job assignments\n, • Must be able to work excessive overtime and drive under difficult and severe weather and road conditions like fog, snow, all weather.\n\n PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $65.27 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. Qualifications Minimum: \n • Must be at least 18 years of age\n, • Must possess a High School diploma, GED, or equivalent work experience.\n, • Must have a valid California Class C Driver's License or obtain one within 10 days of hire.\n, • Ability to work in all types of weather extremes\n, • Ability to drive safely in all weather and road conditions\n, • Ability to work extended hours, nights, weekends and holidays\n, • Must be able to wear company provided Personal Protective Equipment (PPE)\n, • Must be able to lift up to 65 pounds a minimum of one time a day\n, • Must be a certified Journey-level Elect\n, • CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio\n, • Successful completion of a PG&E Electrician apprenticeship or an IBEW/JATC-sanctioned Electrician apprenticeship\n\n Desired: \n • 5+ years work experience as a Certified Journey-level Electrician in an industrial and/or generation work environment\n, • PG&E construction or utility experience\n, • Experience with electronic or mechanical equipment\n, • Instrumentation and Control experience\n, • Motor Control experience\n, • Electrical Substation or Power Generation experience\n, • High voltage experience\n, • Experience working with testing equipment and troubleshooting\n, • Certification(s) in safety training including but not limited to certification from Occupational Safety and Health Administration (OSHA) or Mine Health and Safety (MHSA)\n, • Ability to reside within a 60 minute commute time from the headquarter location\n\n Pre-Employment Testing PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the Pre-employment testing program website. \n • Physical Test Battery\n, • Work Orientation Inventory-Physical/Technical Driving\n\n Purpose, Virtues and Stands Our Purpose explains "why" we exist: • Delivering for our hometowns, • Serving our planet, • Trustworthy, • Empathetic, • Curious, • Tenacious, • Nimble, • Everyone and everything is always safe, • Catastrophic wildfires shall stop, • It is enjoyable to work with and for PG&E, • Clean and resilient energy for all EEO Pacific Gas and Electric Company is an Equal Employment Opportunity employer that actively pursues and hires a workforce that reflects the hometowns we serve. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, sex, age, religion, physical or mental disability status, medical condition, protected veteran status, marital status, pregnancy, sexual orientation, gender, gender identity, gender expression, genetic information or any other factor that is not related to the job. Employee Privacy Notice The California Consumer Privacy Act (CCPA) goes into effect on January 1, 2020. CCPA grants new and far-reaching privacy rights to all California residents. The law also entitles job applicants, employees and non-employee workers to be notified of what personal information PG&E collects and for what purpose. The Employee Privacy Notice can be accessed through the following link: Employee Privacy Notice PG&E will consider qualified applicants with arrest and conviction records for employment in a manner consistent with all state and local laws.

Job ID: 712190BR Date posted: Dec. 08, 2025 Description:IBEW Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. This occupation requires repair, installation and maintenance of plant electrical systems. Determines routing, location and methods of installing wires, conduits, electrical equipment, fixtures and accessories, following trade practice, blueprints, wiring diagrams and applicable state, municipal and underwriters' specifications, codes and ordinances. Determine need for repair or replacement, best and safest method of restoring interrupted service. Computes wire gauge, power and load limit requirements when required. Performs such construction and maintenance operations as installing and maintaining large motors, transformer banks, welding generators, panels and switchboards. Does repair and installation work such as splicing, tapping and insulating high voltage wire, and troubleshoots on hot circuits. Maintains electrical systems and accessories, on plant machines and equipment; or Determines by inspection the electrical repair, replacement and maintenance operations necessary to maintain in efficient operation condition all types of overhead crane and hoist equipment. Maintains electrical accessories, control devices, wiring, and other components of the system. Make emergency repairs as required; or Rebuilds and rewinds motors, generators, transformers, and similar electrical equipment. Diagnoses trouble and determines method of repair and replacement units required. Replaces parts and units as is necessary, reassembles equipment and tests for conformance to specifications . Performs mechanical operations necessary to the dismantling, disassembly, repair and installation of electrical units. Must possess license of certificate as required by law. Performs satisfactorily any function of the Maintenance Electrician when so assigned. TYPICAL MATERIALS, TOOLS AND EQUIPMENT USED: Materials worked on: Electric motors, generators, transformers, switchboards, controls and other electrical equipment. Materials worked with: Wire, tape, solder, conduit, insulators, fuses, switches, relays, screws, bolts, lubricants, insulating varnishes, lighting fixtures, and other electrical repair and replacement parts and supplies. Tools used: Electricians' hand tools, soldering irons, wire strippers, blow torch, chain tongs, wire pullers, hickeys; wire gauges, measuring instruments as ammeters, voltmeters, watt meters, ohmmeters, wheat stone bridges, program logic controls. Equipment used: Power tools such as drill presses, hack saws, pipe benders and threaders; soldering furnaces, coil winding machines; block and tackle, scaffolding, ladders, safety belts. Must be able to obtain and maintain a Top Secret clearance. U.S. Citizenship is required. Basic Qualifications: To use electricians' hand tools and electrical testing and measuring instruments. To use electrical shop power tools, equipment and accessories. To use electrical handbooks and charts. To apply a complete knowledge of electrical maintenance and shop theory, practice, procedure, codes and ordinances. To read and interpret complex wiring and circuit diagrams, installation and construction blueprints. To use mathematics involving algebra. Must also have knowledge of automated Facility Controls and be capable of operating an automated facility by using computer equipment which includes monitoring, adjusting settings and recognizing and responding appropriately to alarm conditions. Electrical Journeymen must have a 4 year Apprenticeship through IBEW or equivalent, knowledge to interpret/Read electrical schematic drawings, excellent troubleshooting skills. U.S Citizenship required with ability to obtain and maintain Top Secret clearance. Desired Skills: Must also have knowledge of automated Facility Controls and be capable of operating an automated facility by using computer equipment which includes monitoring, adjusting settings and recognizing and responding appropriately to alarm conditions. Electrical Journeymen must have a 4 year Apprenticeship through IBEW or equivalent, knowledge to interpret/Read electrical schematic drawings, excellent troubleshooting skills. Work Experience on electrical motors, transformers, switchboards, controls and electrical high voltage equipment. Wire, tape, solder, conduit, insulators, fuses switches, relays, screws, and lighting fixtures. Use Power tools such as drill presses, hack saws, pipe benders and threaders; ladders, safety belts. OJT on PALDs, forklift, walk behind lifts, scissor lifts, JLG lifts and working at heights. Medium voltage and/or substation experience desired. Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Top Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off The base range for this position in California is $45.79 - $63.46. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: SPACE Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

FSE or Technician position in a semiconductor equipment company or a technical position in the engineering field) PVD or semiconductor vacuum equipment experienceMulti chamber cluster systems and robotics experience is highly preferred Ability to understand electrical and mechanical drawings for tro

Overview: Vi is recognized as a Great Place to Work and one of Glassdoor's 100 Best Companies to work for. Learn from the best and accelerate your career with Vi. What We Offer: • Competitive pay, • Exceptional benefits, • Generous Paid Time Off - start accruing on day one, • 401k with company match, • Paid maternity and paternity benefits, • Award-winning training and development, • Tuition Reimbursement, • Luxury work environment, • Meaningful and rewarding work Vi at Palo Alto is located at 620 Sand Hill Road, Palo Alto CA 94304 Responsibilities: Maintenance Technician An opportunity exists on our highly accomplished maintenance team. The selected candidate will be responsible for completing routine repairs and preventative maintenance on building systems, life safety systems, building automation systems and equipment. Operates and maintains maintenance equipment. Qualifications: • Qualified applicants are required to possess 2 years of experience in operating and maintaining mechanical equipment and/or performing building repairs., • A trade school or courses in Electrical Wiring, Refrigeration, Heating/Air Conditioning, Plumbing or Carpentry is preferred., • High school diploma or GED equivalent is required., • Knowledge of safety procedures, preventative maintenance program and work order programs. The application window is anticipated to close within 30 days of the date of the posting. Pay Range: USD $28.84 - USD $36.05 /Hr.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. The Engineering & Sciences (E&S) organization pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. Our team is chartered with providing the skills, innovative technologies to develop, design, produce and sustain optimized product lines across the sector while providing a decisive advantage to the warfighter. Come be a part of our mission! We are looking for you to join our team as an Engineering Manager level 2 based out of Sunnyvale, CA. This role is responsible for engineering leadership and technical direction to Marine Systems specializing in the development, manufacture, assembly and testing of power generation systems for next generation naval submarines. The candidate selected will apply their skills to support current and future development of Turbine Generators for Naval Submarines with an integrated engineering team consisting of a diverse staff of backgrounds in Mechanical, Electrical, Aerothermal, Acoustics, Structural and Systems Engineers. In this role, the manager will develop and lead a group of engineers through the entire product lifecycle for complex hardware products to support the U.S. Navy driving technical excellence for positive program impact. The position responsibilities include management of time keeping, performance reviews, staffing and resource planning, training, and team engagement. The ideal candidate will have demonstrated aptitude in areas of requirements and interface management and verification, design of fabricated and machined components, design of electrical, pneumatic, and/or hydraulic subsystems, CAD modeling / drawing review, and successful execution of technical projects to cost and schedule targets. Responsibilities include but are not limited to: \n • Responsible for the leadership and coordination of 25+ person engineering team with 2+ supporting managers\n, • Provide project and technical oversight of design activities performed by the group.\n, • Prepare cost estimates, provide proposal inputs, and review proposal content for both internal and external customers.\n, • Increasing machinery design engineering competencies through employee development and strategic hiring.\n, • Balancing employee needs with business goals.\n, • Provide ownership of and direction to the design processes used in the group.\n, • Basic understanding of the Design, Manufacturing and Test Integration process.\n, • Support department initiatives, forecasting and recruiting, technology roadmap creation, and champion continuous process improvements.\n\n Basic Qualifications: \n • Bachelor's Degree in STEM (Science, Technology, Engineering or Math discipline) with 8 years of engineering experience; OR a Master's Degree in STEM (Science, Technology, Engineering or Math discipline) with 6 years of engineering experience.\n, • Experience in functional/people management.\n, • Ability to work onsite at Sunnyvale, CA. This role is 100% on-site.\n, • US Citizenship required.\n, • Ability to obtain and maintain a DoD Secret clearance.\n\n Preferred Qualifications: \n • Experience as a Technical Lead, Project Manager, or other demonstrated leadership role related to program execution.\n, • Experience with requirements and interface management and verification.\n, • Experience with design of fabricated and machined components, or design of electrical, pneumatic, and hydraulic subsystems.\n, • Technical project management experience with proven successful execution of technical projects to cost and schedule targets.\n, • Project Management Professional Certification (PMP).\n, • Understanding and knowledge of Agile (SCRUM) techniques and activities.\n, • Knowledge of Design Engineering processes, procedures and work instructions required to support both management and engineering tasks.\n, • Experience with proposals and Earned Value Management (EVM).\n\n Primary Level Salary Range: $156,500.00 - $234,700.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit . U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Summary: In our hyper-connected world, RUCKUS Networks is redefining how organizations connect, communicate, and collaborate. We’re seeking a Senior Solution Engineer to join our dynamic Solution Engineering team. This hands-on role is ideal for a seasoned technical professional passionate about enterprise networking, customer engagement, and solution development. You’ll work closely with Sales Engineering, Product Management, and Technical Marketing to design and deliver compelling solutions that showcase the power of RUCKUS technologies and our technology partner integrations. This is an onsite role based in Sunnyvale, CA, and candidates must be located in the San Francisco Bay Area. Key Responsibilities: • Solution Design & PoCs: Architect and implement scalable, repeatable proof-of-concept (PoC) environments and demos that highlight solution capabilities across Wi-Fi, switching, cloud, and security., • Customer Engagement: Support pre-sales and post-sales activities by delivering technical presentations, demos, and deep-dive sessions to customers and partners., • Lab Management: Build and maintain solution engineering labs for testing, validation, and enablement purposes., • Technical Enablement: Develop and deliver enablement materials for Sales Engineers, including demo guides, configuration templates, and training content., • Cross-functional Collaboration: Partner with Product Management, Technical Marketing, and Engineering to provide feedback, influence roadmap decisions, and ensure alignment with customer needs., • Competitive Analysis: Evaluate competing technologies and solutions; contribute to positioning strategies and differentiation messaging., • Content Creation: Author technical documentation such as solution briefs, deployment guides, and architecture diagrams. Qualifications: • Experience: Minimum 5years in solutions engineering, systems engineering, technical marketing, or related roles in enterprise networking and\or developing solutions., • Education: BS in Electrical Engineering, Computer Science, or related field (or equivalent experience). Technical Expertise: • Strong knowledge of enterprise networking: Wi-Fi (802.11 a/b/g/n/ac/ax/be), switching (L2/L3, VLANs, STP, routing protocols), NAC, and network security (NGFW, UTM, SD-WAN, SASE)., • Familiarity with cloud-managed networking platforms, network analytics, and AIOps., • Experience with scripting/automation tools (Python, Ansible, Bash)., • Adept and familiar with APIs and API level integration between platforms., • Proficiency in network testing tools and delivering test results., • Communication: Excellent verbal and written communication skills; capable of presenting to technical and executive audiences., • Experience with ZTNA, SASE, SSE architectures., • Prior lab design and PoC framework development., • Familiarity with AI/LLM tools for productivity and content generation. #LI-CB1 #LI-REMOTE Our salary ranges consider a wide variety of factors, including but not limited to benchmarking by independent third-party consultants, skill sets, years of experience, training, education, geography, and other business needs. Depending on experience, the range can be higher for candidates with exceptional experience and a demonstrated history of successful performance. This position's expected total compensation (base salary and commission range) $135,000.00-$175,000.00 Why CommScope: CommScope is on a quest to deliver connectivity that empowers how we live, work, and learn. Our employees push the boundaries of communications technology that enables game-changing discoveries like 5G, the Internet of Things, and gigabit speeds for everyone, everywhere. With our unmatched expertise in copper, fiber, and wireless infrastructure, our global clients rely on us to outperform today and be ready for the needs of tomorrow. If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at CommScope. CommScope is an Equal Opportunity Employer (EEO), including people with disabilities and veterans. If you are seeking an accommodation for the application or interview process, please contact us to submit your request at . You can also learn more about CommScope’s accommodation process and EEO policy at ___ Why Join RUCKUS Networks? RUCKUS Networks, a part of CommScope, is a leader in wired and wireless networking innovation. Our mission is to deliver high-performance connectivity that empowers how people live, work, and learn. Join a team that thrives on pushing boundaries and delivering transformative solutions to customers worldwide. CommScope is an Equal Opportunity Employer (EEO), including individuals with disabilities and veterans. To request accommodation during the application or interview process, please contact: ___ Learn more about our hiring process: ___

Location: Santa Clara, CA(Remote OK but preferably in PST time zone) Duration: 12 months contract Description Hybrid Role: 2-3 days in Office Remote OK but preferably in PST time zone. Interview - Phone Interview followed by (2) MS Teams technical interviews. Candidate needs to be on Camera Top Must Have Skills: Solid minimum 8 + years Design Verification Experience Verification Experience with DDR5 Controller /PHY System Verilog /UVM - Language Skills The Role: We are looking for an adaptive, self-motivative Design Verification Engineer to join our growing team. As a key contributor, you will be part of a leading team to drive and improve Client's abilities to deliver the highest quality, industry-leading technologies to market. Be a part of a team that delivers Industry leading IP and help our experts in RTL, FW, circuit, and architecture teams develop leading edge and differentiating IPs. The person: You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and experience collaborating with other engineers located in different sites/time zones. You have strong analytical and problem-solving skills and are willing to learn and ready to take on problems. Key Responsibilities: Develop/Maintain tests for functional verification. Build the directed and random verification tests, debug test failures to determine the root cause, work with RTL and firmware engineers to resolve design defects and correct any test issues. Work on functional & code coverage verification.Provide technical support to other teams Preferred experience: Experience with C/C++ Experience with Verilog, System Verilog, and modern verification libraries like UVM 10+years of ASIC design verification experience Experience / Background with DDR or Memory Controller. PHY Verification is a plus Experience with scripting languages like Python, Perl and TCL is a plus. Collaborate with architects, hardware engineers, and firmware engineers to understand the new features to be verified Understanding of Design for Test methodologies and DFT verification experience is a plus Proficient in debugging firmware and RTL code using simulation tools Academic credentials: Bachelor’s or master’s degree in computer engineering/Electrical Engineering About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why join us? 💡Were building general purpose robotic intelligence - were moving from prototypes to manufacturing robots at scale (300-400 units/month). This is the future of robotics happening right now. 🚀 Hypergrowth Opportunity: You'll be the founding Head of Supply Chain Manufacturing Engineering reporting directly to co-founders. This is a 0→1 role where youll build the entire manufacturing operation from scratch and hire your own team. 🎯 You'll sit at the intersection of engineering supply chain and manufacturing strategy - turning cutting-edge AI robotics from prototypes into real products. 💰Base Salary: $200k-$300k plus meaningful equity! 🔍 Overview: Were looking for a Head of Supply Chain Manufacturing Engineering with significant experience to lead the transition of our robotic prototypes into scalable, cost-effective, and high-quality manufactured products. This individual will sit at the critical intersection of engineering, supply chain, vendor management, and manufacturing strategy, playing a pivotal role in our journey to produce 300-400 units per month. We need someone who is hands-on, technically strong, and excited to build from 0 to 1. 🧩 What You'll Be Doing: • Driving the transition of robot prototypes to low-volume builds (first Collaborating closely with mechanical, electrical, and systems engineers to guide design-for-manufacture (DFM), design-for-assembly (DFA), and design for cost., • Identifying, evaluating, and managing global suppliers, vendors, and contract manufacturers, with a strong emphasis on working with vendors in China., • Conducting cost modeling, BOM optimization, and manufacturability assessments to ensure designs meet cost targets while maintaining performance and reliability., • Setting up the link between supply chain and prototype refinement, continuously optimizing until all components are readily available for high-quantity supply. 👤 What Were Looking For: • 10+ years of experience in supply chain and manufacturing engineering, with a background in mechanical engineering, • Has experience setting up a factory in the US for robotics or automotive, • Scaled a mechanical product (e. g. , car/robots) from prototype to 300- 400 units/month, • Managed global vendors, especially in China, • Hands- on technical strength in supply chain and manufacturing, • Strong negotiation skills for vendor contracts. Experience in a startup or early- stage hardware environment.

Position Summary The Estimator plays a central role in evaluating and forecasting costs for large-scale solar and energy storage developments. This position supports projects from early feasibility through final execution, ensuring cost accuracy, market alignment, and financial competitiveness. The role involves preparing comprehensive cost models, analyzing contractor proposals, and supporting strategic decisions across civil, electrical, and structural work scopes. Collaboration with internal teams—such as development, engineering, procurement, and project management—is key to ensuring high-quality, data-driven estimates. The ideal candidate brings a solid foundation in construction estimating, experience with renewable energy infrastructure, and a strong command of cost modeling for utility-scale projects. Regular presence in the company’s Bay Area office is preferred. Key Responsibilities • Cost Estimation and Analysis, • Develop detailed cost estimates for large solar and battery storage projects, covering site grading, foundations, mounting systems, cabling, substations, and grid interconnections. • Review and compare subcontractor and supplier bids to validate cost competitiveness., • Build and maintain cost databases, unit price libraries, and productivity benchmarks tailored to solar EPC (Engineering, Procurement, and Construction) work. • Deliver conceptual, budgetary, and detailed cost estimates to support all project stages. • Prepare contingency assessments and sensitivity analyses for cost risk management., • Market Research and Data Management, • Maintain accurate records of historical cost data and project metrics., • Analyze market trends in equipment, materials, and labor to inform pricing strategies., • Track regional cost variations and prevailing wage requirements, including compliance with relevant labor and apprenticeship standards. • Validate estimates through benchmarking against recognized industry and public- sector data sources. • Cross-Functional Collaboration, • Work with engineering to assess design alternatives and their cost impacts., • Support procurement with bid evaluation and vendor negotiations., • Provide cost input for project development activities such as site selection, permitting, and grid interconnection. • Communicate findings and present cost summaries, value engineering options, and risk evaluations to management. • Processes and Tools, • Apply estimating software and internal modeling tools for cost forecasting., • Develop standardized templates, assumptions, and estimating protocols to ensure internal consistency. • Recommend improvements to estimation methodologies and project cost controls. Qualifications • Bachelor’s degree in engineering, construction management, or a related technical field. • Minimum of 5 years of experience in estimating large-scale infrastructure, renewable energy, or EPC construction projects. • Strong understanding of solar PV and battery storage technologies, including major system components and installation methods. • Familiarity with regional labor markets, wage compliance, and productivity benchmarking. • Advanced proficiency in Microsoft Excel and estimating tools; familiarity with scheduling software such as Primavera P6 or MS Project is advantageous. • Excellent analytical and communication skills with high attention to accuracy and detail. • Ability to manage multiple priorities under tight deadlines in a development-focused environment. • Working knowledge of construction contract structures (lump sum, unit price, EPC)., • Demonstrated ability to identify cost-saving measures and mitigate risk through value engineering. Compensation and Benefits • $125,000 - $160,000 plus 15% bonus, • Comprehensive benefits including health coverage, retirement plan (401k match up to 5%) with employer contribution, and paid time off. • Flexible work options with a collaborative, mission-driven culture., • Opportunity to contribute to the growth of renewable energy infrastructure and sustainable development.

Hiring: Electrical Construction Project Manager | Lead High-Visibility Projects Multiple Opportunities open! We’re looking for a driven Project Managers to take ownership of complex electrical construction projects—ground-up, design/build, and fast-moving commercial work. If you thrive in a high-accountability environment where your decisions shape the schedule, budget, and client experience, this is a role where you will lead, influence, and grow. What You’ll Do • Run projects from kickoff through closeout—budgeting, scheduling, procurement & client communication, • Be the primary contact for GCs, owners, and end users, • Manage RFIs, submittals, change orders & all project documentation, • Own project financials: forecasting, invoicing, POs, and cost control, • Partner with field leadership to plan manpower, sequencing, and subcontractor coordination, • Drive design/build execution with internal and external teams, • Build strong client relationships through clarity, responsiveness & follow-through, • Experience managing electrical construction projects (commercial, industrial, or design/build), • Strong understanding of electrical power & lighting systems, • Solid command of MS Office, Bluebeam, Adobe & construction software, • Leadership presence with the ability to influence teams and drive decisions High-visibility projects Real ownership and autonomy Fast-paced, team-focused environment Direct impact on schedule, budget & client satisfaction Strong pathway toward senior PM or operational leadership Requirements • 3+ years in electrical construction (Project Engineer, Estimator, or PM experience), • HS diploma required; construction-related degree preferred Send a message to learn more or express interest.

Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA Title: Machine Learning Engineer Location: San Jose, CA Responsibilities: • Productize and optimize models from Research into reliable, performant, and cost-efficient services with clear SLOs (latency, availability, cost)., • Scale training across nodes/GPUs (DDP/FSDP/ZeRO, pipeline/tensor parallelism) and own throughput/time-to-train using profiling and optimization., • Implement model-efficiency techniques (quantization, distillation, pruning, KV-cache, Flash Attention) for training and inference without materially degrading quality., • Build and maintain model-serving systems (vLLM/Triton/TGI/ONNX/TensorRT/AITemplate) with batching, streaming, caching, and memory management., • Integrate with vector/feature stores and data pipelines (FAISS/Milvus/Pinecone/pgvector; Parquet/Delta) as needed for production., • Define and track performance and cost KPIs; run continuous improvement loops and capacity planning., • Partner with ML Ops on CI/CD, telemetry/observability, model registries; partner with Scientists on reproducible handoffs and evaluations. Educational Qualifications: • Bachelors in computer science, Electrical/Computer Engineering, or a related field required; Master’s preferred (or equivalent industry experience)., • Strong systems/ML engineering with exposure to distributed training and inference optimization. Industry Experience: • 3–5 years in ML/AI engineering roles owning training and/or serving in production at scale., • Demonstrated success delivering high-throughput, low-latency ML services with reliability and cost improvements., • Experience collaborating across Research, Platform/Infra, Data, and Product functions. Technical Skills: • Familiarity with deep learning frameworks: PyTorch (primary), TensorFlow., • Exposure to large model training techniques (DDP, FSDP, ZeRO, pipeline/tensor parallelism); distributed training experience a plus, • Optimization: experience profiling and optimizing code execution and model inference: (PTQ/QAT/AWQ/GPTQ), pruning, distillation, KV-cache optimization, Flash Attention, • Scalable serving: autoscaling, load balancing, streaming, batching, caching; collaboration with platform engineers., • Data & storage: SQL/NoSQL, vector stores (FAISS/Milvus/Pinecone/pgvector), Parquet/Delta, object stores., • Write performant, maintainable code, • Understanding of the full ML lifecycle: data collection, model training, deployment, inference, optimization, and evaluation. Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA

Key Responsibilities: • Experience with high voltage circuits, power component selections., • Design, develop and implement technical solutions for high power testing and design testing fixtures., • Hands-on with lab instruments such as oscilloscopes, RLC analyzers,etc.,, • Experience in drawing the cable harnesses using Auto Cad, etc.,, • Experience with doing Bill of materials, manufacturing experience dealing with issues and providing solutions

Spacecraft Avionics Lead Engineer San Francisco Bay Area A pioneering space company developing next-gen orbital mobility solutions is hiring an Avionics and Software Lead to own the full stack of spacecraft avionics and flight software for a new Spacecraft Development. This is a rare opportunity to architect, build, and validate a complete flight system from scratch, working on cutting-edge propulsion-enabled platforms designed for responsive orbital manoeuvring. In this role, you'll define the avionics architecture, lead integration of radiation-tolerant electronics, and drive flight software development—including GNC algorithms, EPS design, and hardware-in-the-loop testing. You’ll collaborate closely with cross-functional engineering leads to ensure spacecraft safety, autonomy, and reliability from concept through CDR. This is a hands-on leadership role for someone excited by the challenge of building high-performance spaceflight systems in a rapid development environment. What You'll Be Doing: • Own the full avionics and flight software architecture through critical design review (CDR), • Select and integrate COTS radiation-tolerant components for power, compute, and data handling, • Lead development of flight and ground software (telemetry, real-time control, fault management), • Define and implement guidance, navigation, and control (GNC) algorithms, • Design electrical power systems (EPS), data bus architecture, and flight harnessing, • Build and operate a flat-sat HIL testbed for integration and validation, • Develop ICDs and maintain firmware/software configuration processes, • Support subsystem integration and testing campaigns, • Conduct FMEA and reliability analyses, • Lead subsystem design reviews and contribute to broader mission engineering milestones What You'll Need: • Bachelor’s degree in software engineering, electrical engineering, or similar, • 8+ years of experience developing avionics or flight software for spacecraft or other high-reliability systems, • Strong background in embedded systems, spacecraft autonomy, or GNC, • Proficiency in C/C++ or Rust; Python for scripting/testing, • Experience with radiation-hardened processors and electronics (Microchip, Xilinx, etc.), • Familiarity with CAN, SpaceWire, RS-422, and other bus protocols, • HIL integration experience and knowledge of EMI/EMC and power distribution design principles, • U.S. Person (citizenship or permanent residency) required Desirable Experience: • Autonomy frameworks or fault-tolerant flight software, • Space-rated EPS or battery management systems, • Responsive space operations or in-space logistics, • Previous experience in a startup or fast-paced R&D environment

Previous Pharmaceutical/Biotech experience is mandatory for this role. MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and other Consulting services. MMR Consulting has offices in Canada, USA, and Australia. This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers and specialists involved in project management, commissioning and qualification, of equipment, systems and facilities. The work will require working out of the client’s facilities in San Francisco Bay Area, California. This role is for Bioprocess Sr. C&Q Engineer role to work on the commissioning, qualification, startup of upstream and downstream bioprocess systems/equipment in the biopharmaceutical industry, as well as process equipment in pharma/biotech industries. The ideal candidate should possess leadership skills to lead/mentor intermediate/junior engineers. Responsibilities • Provide technical guidance into the commissioning, qualification and start-up of various equipment and facilities used in life science manufacturing, such as bioreactors, tanks, CIP, Buffers, Media, Chrom, TFF, washers & autoclaves, etc., • Lead the development of key qualification deliverables during the project lifecycle to ensure project is well defined, and the action plan to test the system is applicable and relevant., • Lead qualification processes throughout the project lifecycle such as VPP, Risk Assessments, RTM, DQ, FAT, SAT, IQ, OQ and PQ as appropriate to ensure timely completion and to ensure all quality and engineering specifications are met., • Prepare protocols, execute protocols, summarize data, resolve deviations, prepare final reports., • Experience with C&Q of process equipment, utilities, facilities is an asset. Thermal Validation experience is an asset., • Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, provide updates., • Engage other departments, as required, for design reviews and decisions., • Travel may be occasionally required for meetings with clients, equipment fabrication vendors or Factory Acceptance Testing (FATs)., • Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases., • Client-management (maintain key Client relationships in support of business development and pursuit of new work), project scheduling/budgeting, coordination of client and MMR resources for effective project delivery, supporting business development (providing technical support to the sales as required for proposals/opportunities), presenting at industry conferences/publishing papers etc., • Visit construction and installation sites following all site safety requirements., • 8-12+ years for years of experience in commissioning, qualification or validation of various systems within the pharmaceutical/biotech industry., • Excellent written and spoken English is required including the preparation of technical documents in English, • Knowledge of requirements for a cGMP operations, including SOPs, Change Controls, Validation., • Experience with developing and executing validation projects. Risk-Based Commissioning & Qualification approaches, such as ASTM E-2500 or ISPE ICQ, is considered an asset, but not required., • Experience with commissioning and qualification of biotech process equipment (upstream or downstream or both), such as some, but not all, of the following: fermentation, bioreactors, downstream purification processes (chromatography, TFF, UF) is required, • Experience with commissioning & qualification of process control systems (i.e. PCS, SCADA, Historians) and building automation systems (i.e. Siemens Insight / Desigo, JCI Metasys) are considered an asset, but not required., • Experience with Qualification or Validation of clean utilities, ISO clean rooms, and Thermal Validation is considered an asset., • Experience with preparation and execution of URS’s, DQ’s, RTMs, Risk Assessments, CPPs, VPPs, FATs, SATs, IOQs, NCRs, Final Reports., • Ability to lift 50 lbs., • Engineering or Science degree, preferably in Mechanical, Electrical, Chemical, Biochemical, Electromechanical or a related discipline., • Ability to handle multiple projects and work in a fast-paced environment. Equal Employment Opportunity and Reasonable Accommodations MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

We are looking for a junior, motivated and talented problem solver. The ideal candidate will be responsible for testing and assembling electrical and mechanical components into devices. They will also help design and manufacture our product, organize the lab and work with suppliers as needed. They should be able to make quality assurance checks in order to keep the product standard high. Responsibilities • Evaluate electrical products and systems by designing testing methods, • Organize lab, • Test finished products and system capabilities, • Keep necessary equipment operational, • Contribute to team efforts by accomplishing related results Qualifications • Bachelor's degree in Electrical Engineering or related field, • Have knowledge of sensors, mechanical parts and electronic boards, • Can solder electrical components on PCB, • Strong problem solving, technical, math and science skills, • Strong written and verbal communication

We’re looking for a strategic Director of Product Line Management to lead our coherent optics portfolio in a high-impact, cross-functional role driving product, engineering, and commercial strategy. In this role, you’ll lead our next-gen optical solutions, spanning 100G to 1.6T transceivers and DSPs, driving product, engineering, and commercial strategy. You’ll own the roadmap, guide products from concept to launch, and lead business decisions around pricing, positioning, and customer alignment. What You’ll Do: • Define and execute the global strategy and roadmap for coherent transceivers and DSP products., • Own the full business process—from opportunity identification through product launch and lifecycle management., • Lead pricing strategy, margin optimization, and overall P&L for your portfolio., • Partner cross-functionally with Engineering, Sales, Operations, Finance, and Supply Chain to align technical and commercial goals., • Capture and prioritize market, product, and feature requirements (MRDs & PRDs)., • Track and analyze competitive trends to inform product direction., • Represent Arycs Technologies at customer meetings and industry events., • Drive pilot programs, sample engagement, and early customer adoption., • Deliver regular updates on business case performance and KPI tracking., • Co-create marketing content and sales enablement tools. What You'll Bring: • 10+ years of experience in PLM, product marketing, or technical leadership roles within the optical networking or semiconductor space., • Deep understanding of coherent optics, DSP architectures, and industry standards (ZR/ZR+, LR, etc.)., • Proven ability to own and deliver complex product strategies with P&L accountability., • Exceptional communication skills—you can engage confidently with engineers, executives, and customers alike., • Analytical, organized, and process-driven with strong decision-making skills., • Master’s degree or higher in Electrical Engineering, Photonics, or a related technical field., • A strong industry network and customer-facing experience are essential. We Offer: • A fast-paced, high-growth culture where your work truly matters., • Competitive incentive bonus compensation., • Flexible work arrangements and generous paid time off., • Health benefits and retirement plans (401k for U.S.-based roles)., • Ongoing career development in a collaborative, international setting.

Job Description • Define CPO product specifications and strategy with the design team to achieve low power, high density, low cost, and high reliability CPO solutions., • Design, simulate, budget, and analyze CPO systems at both optical and electrical levels., • Master’s or PhD in Mechanical Engineering, Electrical Engineering, Materials Science, or related field., • Experience in developing and deploying silicon photonics solutions to the market., • Experience in developing photonics, including link budget analysis., • Over 5 years of experience in semiconductor technology development roles., • Over 5 years of experience collaborating with manufacturing partners, including suppliers, OSATs, and foundries., • In-depth knowledge of various packaging architectures, as well as EIC and PIC design architectures. Salary range: $190,000- $270,000. Employee may be eligible for performance bonus, short and long term incentive programs. Actual total compensation will be dependent upon the individual's skills, experience and qualifications. In addition, MediaTek provides a variety of benefits including comprehensive health insurance coverage, life and disability insurance, savings plan, Company paid holidays, Sick Leave, Vacation time, Parental leave, 401K and more. MediaTek is an Equal Opportunity Employer that is committed to inclusion and diversity to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

HCLTech is looking for a highly talented and self-motivated Manufacturing Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Manufacturing Engineer Job ID: 1640335BR Position Type: Fulltime Location: Milpitas, CA Responsibilities: Manufacturing Process & Documentation • Manage general manufacturing processes including BOM management, assembly procedures, tools, and drawings., • Provide day-to-day manufacturing production support., • Drive process improvements, conduct root cause investigations, and perform failure analysis., • Execute change order processes with proper reasoning and justification., • Prepare IQ/OQ/PQ protocols in line with standard procedures., • Organize review meetings with the validation board and ensure report completion and closure., • Demonstrate proficiency in PFMEA and risk assessments at both process and product levels., • Interpret and create/edit electrical schematics and drawings., • Collaborate with Quality teams regularly., • Perform NCMR disposition per SOP guidelines., • Troubleshoot component-level issues related to PCBA, electrical designs, test fixtures, tools, and equipment., • Build electro-mechanical test fixtures/equipment/tools based on specifications., • Perform preventive maintenance of equipment and fixtures periodically., • Support audits, address observations, and implement corrective actions., • Work with CAD models and PCB layouts., • Proficient in SAP and Agile systems., • Cross-Functional Collaboration, • Communicate effectively with cross-functional teams, buyers, planners, suppliers, and calibration coordinators., • Provide project updates to senior management and take ownership of deliverables., • Work closely with technicians to collect data for continuous improvement. Pay and Benefits Pay Range Minimum: $71000 per year Pay Range Maximum: $108000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation. Compensation and Benefits A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You’ll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

About the team Our Smart Industry team is one of the leading teams in the AI industry, known for its exceptional capabilities and expertise in the "AI+industry" field. With a strong focus on innovation and cutting-edge research, we have established ourselves as pioneers in the area of "AI+industry". We are dedicated to developing AI‐based algorithmic tools for the product quality domain, driving end-to-end quality awareness and decision-making efficiency improvements from R&D through after-sales. We welcome candidates who are passionate about pushing the boundaries of AI and are eager to contribute to our team's pioneering work. Join our team and be part of an exciting journey where you can make a significant impact in the field of smart industry. Duties and responsibilities • Lead the end-to-end development and deployment of AI-powered after-sales agent solutions for vehicle series L & i, ensuring coverage of after-sales scenarios across all user vehicles., • Identify, evaluate, and conduct on-site technical due diligence for AI Agent vendors in Silicon Valley, negotiate and finalize technology procurement contracts aligned with development requirements., • Oversee external vendors to ensure timely delivery of core Agent functionalities (e.g., multimodal interaction, self-evolving inference engines), • Drive North America-localized data training pipelines to enable cross-scenario migration capabilities for adaptive decision-making., • Attend key industry summits to identify emerging industrial AI technologies, document technical innovations, and deliver monthly cutting-edge technology briefings. Requirements Education/Experience • Master’s degree or higher in Computer Science, Electrical Engineering, or related fields, with a focus on AI/ML, autonomous systems, or industrial automation., • 7-10 years of hands-on experience in AI development (reinforcement learning, NLP/CV pipelines) and automotive aftermarket operations (diagnostics, supply chain collaboration)., • Deep knowledge of federated learning frameworks, edge computing, and automotive protocols (e.g., CAN bus, UDS)., • Must have excellent negotiation and problem-solving skills., • Strong leadership to navigate ambiguity, drive cross-functional alignment, and mentor technical teams., • Exceptional communication skills to bridge Silicon Valley innovators and China-based stakeholders., • Strategic mindset to translate technical breakthroughs into scalable business solutions. About Li Auto: We're a leading Chinese new energy vehicle company that designs, develops, manufactures, and sells premium smart electric vehicles (EVs). Through product, technology, and business model innovations, we provide families with safer, more comfortable, and more convenient products and services.

Job details are Shared below: Job Title: Lab Technician (JR.) Location: Santa Clara, CA (100% onsite) Job Duration: 6+m Contract Primary Skills: • Experience working with General camera and lab equipment operating, • Basic manual skills including toolmanship and equipment assembly, • Basic photography / picture-taking skills, with attention to visual details, • Basic photography / picture-taking skills, with attention to visual details, • Good communication skills (verbal & written) in English, • All necessary camera training will be provided. Preferred: • Entry level position - candidate with a background in imaging or an interest in camera/video a plus, • Hardware assembly or debugging experience would be a plus, • Position would be good for someone who wants to work in a different domain of engineering, • Tools: Windows camera app (for image capture) and various proprietary tools Responsibilities: • Basic lab management, lab equipment bring-up and maintenance, • Camera competitive analysis and benchmarking, field testing, image / video capture, • Create demo scene setups, collect results, and prepare test reports. Job Summary: • THE ROLE:, • Advanced Technology Group (ATG) is an entrepreneurial research and development team tasked to build AMD's future IPs, new platforms, and exciting products. You will have the opportunity to work with a winning organization, explore innovative technologies, and collaborate with various R&D teams and customers in a joint effort to develop best-in-class hardware, software, and systems that solve real-world problems for end users., • Our organization fosters a fast-paced environment of innovation, technology development, and cross-team collaboration, aiming at short concept-to-market time, while solving tomorrow’s imaging problems and productizing seemingly impossible solutions., • THE PERSON:, • We are looking for talented and result-oriented individuals to support our team through image / video capture, camera benchmarking, and field testing. You will operate imaging laboratory equipment and cameras, collect objective performance indicators, and prepare test reports., • The ideal candidates should be self-motivated, passionate about cameras and image quality, and have a critical eye and attention to detail. They should have effective communication skills, and the ability to learn quickly and work efficiently with team members of diversified backgrounds. This is an entry-level position; the successful candidate will be trained to correctly and efficiently perform job duties Qualification: Associate or bachelor’s degree in computer science, electrical engineering, or other relevant areas. Please respond at the earliest to speed up the interview process. I will contact you if I need further details. A SAICON COMPANY Amit Bundele Technical Recruiter Phone : 669-319-4167 Email : San Jose, California a Saicon Consultants, Inc. Company

Job Title: Electro-Mechanical Assembler Duration: 12 Months Location: Milpitas, CA Pay Rate: $25- $27/hr. Intelliswift Software Inc. conceptualizes, builds, and supports the world's most amazing technology products and solutions. Our team of rich experts from diverse backgrounds contributes to making Intelliswift one of the most reliable partners in IT and Talent solutions. We specialize in delivering world-class Digital Product Engineering, Data Management and Analytics, and Staffing Solutions services to Fortune companies, SMBs, ISVs, and fast-growing startups. Job Description: Assembler must be able to follow documentation thoroughly to build Electronic and Mechanical tabletop and standalone systems/assemblies, also able to build sub-assemblies, add subassemblies to other builds and or full builds from the beginning to completion for technical review. Optical alignment/calibration and basic mechanical and electrical troubleshooting. You will perform these tasks in support of multiple product lines, each with options and upgrades, some of which are implemented by hardware changes while others are changed by manipulating controls in our proprietary software. Final test of assembly and certification, providing written suggestions for improved documentation, and documenting troubleshooting steps as they occur Assemblers will work with Technicians on their projects as a team. Technicians assist with Assemblers with Tech reviews and final test computer sign off on the Assemblers projects. Responsibilities: • Troubleshoot mechanical, electrical, and optical assemblies that do not meet testing criteria., • Contribute to a documented troubleshooting guide., • Build and test mechanical, optical, and electronic assemblies., • Perform routine inventory control and component inspection., • Collaborate with engineering to resolve problems with components and procedures., • Participate in the continuous improvement of assembly documentation., • Keep a clean work environment at their work area. Qualifications: • Accumulated 5 or more years of manufacturing-related experience preferred, ideally with optics and electro-optics., • Experience in a manufacturing environment as an assembler working technician and Engineers., • Ability to work under frequently changing priorities and deadlines, while keeping a keen awareness of the impact on other areas of the organization., • Knowledge of ESD practices at all times., • Ability to read and follow assembly documents in their entirety. Equal Employment Opportunity Statement Intelliswift celebrates a diverse and inclusive workforce. We offer equal employment opportunities to all applicants and employees. All qualified applicants will be considered regardless of race, color, sex, gender identity, gender expressions, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other protected basis under the law. Americans with Disabilities Act (ADA) If you require a reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact Intelliswift Human Resources Department Other Employment Statements Intelliswift participates in the E-Verify program. Learn More For information on Intelliswift Software, Inc., visit our website at .

Job Description MediaTek’s Data Center team is at the forefront of innovation, driving the development of cutting-edge technologies that power the world's most advanced data centers. We are a dynamic group of system architects, packaging technology developers, and SoC design experts dedicated to creating high-performance, efficient, and reliable solutions. Our team collaborates closely to push the boundaries of technology, ensuring optimal performance, power efficiency, and scalability for data center applications. Join our Data Center team and be a part of the technological revolution that is shaping the future of data centers. If you are passionate about innovation and have the expertise to drive strategic technology development, we would love to hear from you. The Data Center Chassis Lead will be responsible for architecting, adopting and designing chip/chiplet chassis building blocks for data center silicon. Key responsibilities include reviewing chassis building blocks, collaborating with chassis domain lead for architecting the version for data center, working with SoC/Chip/Chiplet design lead for integration requirement, execution plan and implementation, providing improvements based on analysis results, and conducting thorough quality design verification and documentation. Requirement • MS in Electrical Engineering/Computer Engineering or or related field., • 5+ years of experience in designing transistor-level digital circuits., • 3+ years of experience in hands on experience in architecting and designing chassis for data center silicon., • Strong knowledge in SoC/Chip/Chiplet chassis: clock and reset, power and thermal management, out-of-band management, platform security, RAS, debug & test, eFuse control and distribution, and etc., • Expert on designing with Verilog, SystemVerilog, Perl and Tcl script., • Proficiency with EDA tools like VCS, Design compiler, and so on., • Prior experience in all Front End activities and quality checks (eg: Lint, CDC...), • Good understanding and working knowledge in other domains like DV and DFT, timing closure, • Able to provide timing constraints and work with PD teams to ensure RTL meets timing, • Strong debugging and scripting skills (Perl, Python, Tcl...) Location: San Jose, California or Portland, Oregon Salary range: $190,000- $270,000. Employee may be eligible for performance bonus, short and long term incentive programs. Actual total compensation will be dependent upon the individual's skills, experience and qualifications. In addition, MediaTek provides a variety of benefits including comprehensive health insurance coverage, life and disability insurance, savings plan, Company paid holidays, Sick Leave, Vacation time, Parental leave, 401K and more. MediaTek is an Equal Opportunity Employer that is committed to inclusion and diversity to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

Electrical Engineer San Francisco, CA We’re looking for an Electrical Engineer who wants to do more than push drawings. This role is for someone who enjoys solving real design challenges, collaborating closely with architects and engineers, and seeing their work translate into high-performing buildings across the Bay Area. You’ll join a technically strong, design-focused team and take ownership of electrical systems from concept through construction support. The work is varied, fast-moving, and suited for an engineer who is comfortable taking initiative and applying sound judgment. What You’ll Be Doing • Design and develop electrical systems for commercial and institutional building projects, • Engineering calculations (load calculations, short circuit calculations, generator sizing, voltage drop, Title 24 compliance forms), • Coordinate closely with internal disciplines, architects, and clients, • Review shop drawings, RFIs, and submittals; provide construction-phase support, • Participate in client meetings and design reviews, • Mentor junior engineers and contribute to continuous improvement of design standards What We’re Looking For • 5–10 years of electrical engineering experience in the building design industry, • Bachelor’s degree in Electrical or Architectural Engineering (required), • LEED Accreditation, • EIT certification preferred; PE license a strong plus, • Experience with California codes and standards, • Proficiency with Revit and electrical design software, • Clear communicator with strong technical judgment and attention to detail Why Consider This Role • High-quality, design-driven projects throughout San Francisco and the Bay Area, • A collaborative environment that values technical excellence and professional growth, • Competitive compensation, benefits, and long-term career development, • Exposure to complex projects without unnecessary bureaucracy If you’re ready to step into a role where your expertise is trusted and your work makes a visible impact, this position offers room to grow and contribute at a high level.

APR Consulting, Inc. has been engaged to identify a Facilities Manager/Engineer for a temporary crisis staffing opportunity. Title: Facilities Manager/Engineer Location: Los Angeles, CA or Riverside, CA or Anaheim, CA or Irvine, CA or San Diego, CA (Travel and Lodging Accommodations are provided) Pay Rate: $88.50/hr. Shift: 12 hours shifts 7am-7pm or 7pm-7am Duration: Typically 5 days which may start as early as 12/22/2025 (Start Date may change, Must be flexible on duration and start date) JOB SUMMARY Facilities Operations / Engineering • Manage and maintain complex facility systems that support the delivery of world-class healthcare. This role ensures optimal performance of mechanical, electrical, and plumbing systems while maintaining compliance and driving energy efficiency., • Operate, inspect, and maintain HVAC, boiler, chiller, and other critical systems., • Oversee contractors and lead in-house teams performing maintenance and repairs., • Conduct regular inspections to ensure all systems meet compliance standards (e.g., NFPA, OSHA)., • Lead emergency response protocols related to equipment or utility failures., • Collaborate with project managers on facility upgrades and renovation., • Document operational logs, asset inventories, and maintenance history in CMMS., • Support sustainability initiatives and energy conservation program., • Provide technical expertise during facility accreditation and inspections. Qualifications: • Bachelor's degree in Mechanical, Electrical, or Facilities Engineering preferred., • 5+ years of experience in plant operations or hospital facility engineering., • Strong knowledge of codes and standards applicable to healthcare facilities., • Proficiency in Building Automation Systems and computerized maintenance platforms., • Excellent troubleshooting and communication abilities, • Relevant certifications (e.g., PE license, LEED, Certified Healthcare Facility Manager) highly desirable. Work Setting • High-compliance healthcare facility environment, • Fast-paced with potential for after-hours and on-call duty, • Physical requirements include lifting, climbing ladders, and working around industrial equipment Since 1980 APR Consulting, Inc. has provided professional recruiting and contingent workforce solutions to a diverse mix of clients, industries, and skill sets nationwide. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Don't miss out on this amazing opportunity! If you feel your experience is a match for this position please apply today and join our team. We look forward to working with you! #SLA

About Aivres Aivres is a leading global data center and cloud computing solutions provider committed to delivering innovative technologies that propel the world’s leading industries to new frontiers. We deliver and deploy robust, performance-optimized, purpose-built platforms to major data centers around the globe. Responsibilities · Partner with sales team to sell Aivres’s Engineering and Manufacturing capabilities to potential customers · Perform Competitive Analysis and feedback to sales · Works collaboratively with R&D, PM, Sales and customer to finalize Customer Requirements Document (CRD) · Lead the RFP/RFQ response process. Review and provide inputs to customer SOW ensuring alignment with CRD · Partner with sales to complete business case analysis and winning strategy · Define project / program charter and output to the cross functional team by conducting formal kick off · Owns and executes customer’s product life cycle deliverables from Kick-off to MP · Identify key resource needs (Core Team) in support of the project / program. Forms and leads the core cross functional team · Develop plan / schedule to achieve customers required deliverables with high quality and on time · Focal point and owner for managing customers deliverables internally and with customers (Schedule, Cost, Quality, Delivery) · Owns daily / weekly communications and closed loop feedback with customer and internal core team · Owns weekly Dashboard updates to internal Sr management team / customer Qualifications: · Minimum of 7 years of experience in customer technical solution definition and/or program management · Strong knowledge of x86 Architecture and platform · Solid knowledge of Hardware Systems Product Development and Qualification process (Server/Storage/Networking) · Confident individual with strong verbal, written, and presentation skills – Makes great first impressions in new customer engagements. Fluency in Mandarin preferred. · Persistent and creative leader who will drive and manage a cross functional core team to achieve customer deliverables from kick off to Mass Production. · Minimum of Bachelor’s degree in Electrical or Mechanical Engineering or Computer Science EEO Statement Aivres is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Aivres to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Staff Simulation Software Engineer Location: San Jose (full time onsite) Engagement: Contract (1099 or W2) Duration: 6-12 months FTE conversion thereafter. Hourly rate: The focus is on finding the right person, therefore open to market rate. Overview In this senior leadership capacity, you will spearhead the engineering of sophisticated flight emulation platforms designed for rigorous system certification and pilot-interaction studies. You will be responsible for modernizing deployment workflows through automated integration cycles and partnering with multidisciplinary teams to synchronize physical components within synchronized, real-time testing frameworks. By overseeing the full lifecycle of virtualized environments—ranging from component-level benches to full-scale "Iron Bird" rigs—you will ensure simulation accuracy by reconciling digital outputs with empirical data from live flight operations. Beyond the technical architecture, you will define the UI strategy for simulation control, manage the resolution of intricate distributed system anomalies, and cultivate a culture of elite technical mentorship and strategic project execution. Requirements: • Expert experience in simulation software development and systems integration., • Bachelor's or higher degree in Aerospace, Software, Electrical Engineering, Computer Science, or a related field., • Seasoned technical lead for an engineering team; providing guidance in planning and execution. Advanced proficiency in C/C++ and Python., • Expert in MATLAB/Simulink and Python., • Extensive experience developing real-time HIL test infrastructures., • Proven ability to develop simulation tools with a focus on usability, modularity, and performance., • Expert of communication standards and protocols (RS-422/485, CAN/CAN-FD, ARINC-429, Ethernet, TCP/IP, USB etc…), • Experience prototyping Graphical User Interfaces based on user feedback., • Knowledgeable with software engineering practices including CI/CD (GitHub Actions, Jenkins), test-driven development, and agile methodologies., • Strong problem-solving and debugging skills with a proactive, solutions-oriented mindset., • Comfortable working in cross-disciplinary teams and mentoring junior engineers. Preferred Qualifications • Experience with aerospace, spacecraft, or robotics systems—including modeling of flight dynamics, sensor-actuator loops, or avionics., • Proficiency in the NI software suite (LabVIEW, VeriStand)., • Experience developing and troubleshooting custom code (i.e. plugins, logical devices, custom devices) for real-time OS, • Background in simulation infrastructure for VTOL, rotorcraft, or autonomous vehicles., • Understanding of control theory, GNC algorithms, and physics-based modeling., • Hands-on experience with HIL/SIL test rigs, hardware communication protocols, and test instrumentation., • Exposure to regulatory frameworks (FAA, DoD, NASA) and test certification environments., • Startup or fast-paced development experience is a plus., • Experience automating and executing test plans., • Familiarity with fault injection methodologies., • Familiarity with lab