Electrical jobs in Dallas, TX - Page 8Create job alerts

Job DescriptionDescription: Position Summary: Avionics Technicians are responsible to the Avionics Supervisor and shall assure that the procedure outlined in the repair station manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, repairs, troubleshooting, modification of aircraft systems, and installations. In addition, component removal and reinstallation, operational checks, and leak checks are all within the responsibility of the avionics technician. The avionics technician is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for following the coordinated activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer’s maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. The technician will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the avionics supervisor concerning progress of the assigned work., • Perform airframe electrical, avionics repairs, inspections, installations and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc…, • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Technicians shall have all their work inspected (except for off-site repairs, see off-site maintenance requirements) by an appropriately rated inspector as listed on the “Roster of Management Supervisory and Inspection Personnel” at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to other fellow employees. This work requires the following physical activities. • Two or more years related experience and/or training; or equivalent combination of education and experience., • Airframe and Powerplant (A&P) Certificate (preferred), • Federal Communication Commission (FCC) License (optional), • Strong understanding in 145 repair station operations/regulations required., • Clean driving record., • Able to pass a background check., • Results oriented – Proven ability to achieve goals. Follow through and meet deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication – Oral Communication – speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions. Written Communication – Writes material in clear concise terms., • Leadership – Exhibits confidence in self and to others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Inspires respect and trust; Accepts feedback from other. Displays passion and optimism; Mobilizes others to fulfill the vision., • Computer – Knowledge of MS Office Software, AutoCAD, and Corridor. (preferred), • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.

Job DescriptionElectrical Engineer - PE License Title: Sr. Electrical Engineer/Designer - PE LICENSE REQUIRED (TX) Location: Dallas, TX - On Site Salary: $90,000-$150,000/year + Relocation + Bonus + Benefits An Architectural Design firm is looking for a Sr. Electrical Engineer/Designer to join our team in Dallas, TX. We deliver high quality experience to our clientele through our projects in diverse aspects: architectural, planning, design, structural engineering, and much more! What You Will Be Doing: • Manage and oversee Electrical engineering projects of various sizes and complexity for residential and commercial projects, • Prepare the concept design and complete load calculations, schematics, equipment selection, and system concept report, • Design Electrical systems, including but not limited to electrical distribution, transfer switching, UPS, grounding and bonding, lighting and control systems, life safety and emergency systems, and fire alarm., • Design for ICAT services, including but not limited to communication systems, AV systems, security access and monitoring systems, equipment, and structured cabling., • Write construction specifications, • Analyze customer design proposals and specifications to determine cost-effective solutions, • Ensure professional quality services in all facets of work, • Coach and mentor a project team to ensure the technical accuracy of project deliverables, • Manage a team to ensure cost-effective, safe, and timely completion of projects to meet or exceed client expectations, • Manage project activities throughout the lifecycle, including the allocation of adequate resources, documentation, and other factors necessary for success, • Work with clients to deliver the end project, • Prepare and review specification and concept reports, • Provide mentoring to technical staff, assigning duties as required, • Visit the site once under construction when required, • Provide quality and cost control during the design and construction process, • Maintain project schedules and project cost summaries to track work progress, budget status, and manpower resource utilization, • Escalate and identify the need for additional services and fees, • Assist with Shop drawing reviews as required, • Over time as required What you need for this Role: • An undergraduate or Graduate Degree in Electrical or other relevant engineering disciplines is preferred., • Other professional qualifications will be considered, coupled with relevant experience, • Registration as a Professional Engineer (P.E), • Completion of a degree or diploma in project management will be considered an asset, • LEED accreditation is an asset, • Experience and Requirements:, • 5+ years of industry-related experience, • A consulting engineering background is preferred, • Strong understanding of engineering contractors, suppliers, and manufacturers, • Mechanical and Electrical coordination experience, • Construction experience will be considered an asset, • Demonstrated success in project delivery and execution of project management methods, • Flexibility to adjust to shifting priorities and deadlines, • Highly effective negotiation, diplomatic, and conflict resolution skills, • Advanced interpersonal, team building, leadership, and organizational skills, • Able to effectively communicate with all types of staff, including technical, professional, and upper management, • Able to build and maintain lasting relationships with business units, corporate departments, key managers, and other stakeholders What's in it for you: 1. Competitive Salary: $90,000-$150,000/Year + Bonus and Benefits, 2. Health, Dental & Vision, 3. Relocation Assistance, 4. 401k Match, 5. PTO If you are an Electrical Engineer with a PE License, please apply directly & email your most up-to-date resume to Benefits • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 09/03/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please contact a member of our Human Resources team to make arrangements.

Job Description Summary: Since 1997, AlphaStaffHCM™ has delivered HR outsourcing solutions to thousands of small and medium-sized businesses across the country. We are searching for a Senior Plumbing Engineer for one of our premier clients located in Dallas, TX. This is a rapidly growing Texas-based MEP engineering firm with multiple offices, known for a collaborative, non-corporate culture and high-profile projects in healthcare, K-12, higher education, and commercial facilities. The company offers a half-day every Friday, a strong emphasis on professional growth, and a creative, team-oriented work environment. Day-To-Day: As a Senior Plumbing Engineer, you will oversee the plumbing design and documentation of assigned projects for the systems that supply water, remove waste, and support building operations. You will lead and collaborate with other plumbing team members with a focus on effective coordination across disciplines and delivering high-quality, fully integrated designs. This is an opportunity to take ownership of impactful projects, mentor a talented team, and contribute to a collaborative and innovative engineering environment. Responsibilities: • Lead the plumbing design process for assigned facilities projects from concept through completion., • Design plumbing, piping, and related systems for healthcare, education, and commercial buildings., • Collaborate with mechanical, electrical, structural, and architectural teams to produce fully integrated designs., • Oversee and mentor junior plumbing engineering staff throughout design and documentation phases., • Conduct internal reviews to verify accuracy and quality of project deliverables., • Monitor project progress and coordinate with project managers to meet deadlines and budget requirements., • Participate in client meetings and contribute technical expertise to project planning and development., • Active Professional Engineer (PE) license with eligibility to transfer to Texas if currently licensed in another state., • Ten or more years of plumbing engineering experience with facilities building systems in healthcare, education, or commercial facilities., • Proficiency in Revit and AutoCAD with recent hands-on design experience., • Proven track record of leading design teams and delivering complex projects., • Experience coordinating with multiple disciplines on integrated building system designs., • Competitive salary range of $100,000 to $120,000 based on experience., • Half-day Fridays year-round., • 401(k) plan with 3.5% company match., • Comprehensive medical, dental, and vision insurance., • Short-term and long-term disability coverage., • Basic life and AD&D insurance with voluntary options available., • Paid time off starting at 120 hours per year plus 8 paid holidays and 1 floating holiday., • Professional development including paid PE exam costs and 5 paid days off to study., • Free parking.

Job DescriptionDescription: NexVest Realty Advisors, LLC (‘NexVest”) offers a complete range of commercial property management services to improve the performance and efficiency of investment properties. NexVest is committed to supporting the investment and ownership objectives of affiliates and investors. Job Details The Assistant Chief Engineer supports the property’s Chief Engineer in overseeing the daily operations, maintenance, and repair of building systems in a commercial property environment. This is a hands-on role responsible for ensuring the safe, efficient, and reliable operation of all building related systems. Responsibilities • Perform and supervise preventative and corrective maintenance on HVAC, electrical, plumbing, fire/life/safety, and other building systems., • Shares in responsibilities for tenant interaction and services, inventory, supply purchasing, tracking and control., • Respond promptly to tenant service requests and resolve issues related to lighting, plumbing, HVAC, and general building operations., • Conduct routine inspections and assessments of building systems and equipment as directed by management, or as outlined by preventive maintenance schedules., • Operate and maintain critical systems including chillers, UPS, generators, and building automation systems (BAS)., • Maintain accurate logs and reports on equipment performance and maintenance activities, both electronically and written., • Assist with vendor coordination, contractor oversight, and project support., • Ensure compliance with safety policies and procedures; identify and mitigate hazards., • Create, modify and update preventative maintenance schedules within electronic work order system., • Aid and advise in building maintenance protocols and provide feedback as to the effectiveness of preventative maintenance programs., • Participate in after-hours emergency response and on-call rotation., • Support other departments and perform additional duties as assigned., • Aid in guidance and training of entry and lower-level engineer team members., • High School Diploma or GED, • 5+ years of experience in building maintenance, including supervisory responsibilities, • Strong knowledge of HVAC, electrical, plumbing, mechanical, and fire/life/safety systems, • Proficiency with CMMS and BAS systems, • Valid driver’s license, • EPA Universal Certification, • HVAC Certification, • Experience with facilities over 600,000 sq. ft., • A/C Refrigeration Operator Certification, • Chiller Plant Maintenance and thermal storage plant operation procedures Skills & Abilities • Self starter with an ability to work independently & responsibly with minimal required supervision., • Must be collaborative;, • Amenable to leadership advice and guidance;, • Ability to prioritize multiple tasks and responsibilities., • Strong organizational and analytical skills., • Ability to provide efficient, timely, reliable and courteous service to customers and tenants., • Ability to effectively present information., • Ability to utilize building system software as well as the Microsoft Office Suite of products., • Operate personal computer and other office equipment., • The physical ability to stoop, stand , climb, and frequent lift a minimum of 50 lbs., as well as assist others in team lifting as necessary. Benefits & Compensation NexVest offers a competitive base salary based on experience and performance. We offer a generous benefits package that includes an industry leading health insurance plan with no employee premiums or deductibles and a 401(k) plan with employer match. Our talented professionals share a passion for excellence, commitment to teamwork, and pride based on the firm’s track record in the commercial real estate industry. NexVest is an Equal Opportunity Employer.

Job Description Now Hiring: Experienced Plumbing Installers – Join a Growing Team with Top Industry Pay! Are you a skilled plumber with residential service experience? Ready to earn top dollar and grow your career with a company that actually values your work? We’re a fast-growing residential plumbing company looking for Plumbing Installers who are ready to take their career to the next level. If you’re motivated, reliable, and take pride in your craftsmanship — we want to meet you! What You’ll Do: * Install water, gas, and sewer lines with precision * Set up fixtures, water heaters, and plumbing systems * Deliver quality work on time — every time * Communicate clearly and respectfully with homeowners * Represent the company with professionalism and pride What You Bring to the Table: * A valid Driver’s License * A valid Tradesman or Journeyman License * Solid experience in residential plumbing installation/service Company DescriptionWe specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.

Job Description Get Paid to Learn. Grow Fast. Build Your Career in Residential Plumbing! Are you ready to level up your plumbing skills and start earning while you grow? We’re looking for a motivated Plumbing Helper with an Apprentice License who’s ready to jump into hands-on work in the field of residential plumbing. If you’ve got the drive, we’ve got the opportunity. ️ What You’ll Do: • Assist with installs: water, sewer, gas lines, fixtures, water heaters, • Work alongside experienced, licensed plumbers, • Learn real-world skills on live job sites, • Keep job sites organized and efficient, • Apprentice Plumber License (Required), • Residential plumbing experience (At least 1 year preferred), • A valid Driver’s License and dependable rideCompany DescriptionWe specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.

Job DescriptionThis role is a hybrid interior design, sales, client facing role. Who is CinemaTech?CinemaTech is the leader in luxury home theater design. For over 25 years, we’ve served ultra-high-net-worth clients, including leaders in business, sports, and entertainment, with best-in-class theater seating, bespoke designs, and acoustic solutions. We don’t just sell products, we deliver an experience rooted in excellence, trust, and long-term relationships. If you want to grow in a high-expectation, high-performance environment, we want to hear from you. What This Role DemandsThis is a client-facing design and sales role that requires sharp technical skills, exceptional communication, and a driven mindset. You’ll be expected to take initiative, own your territory, and deliver excellence without compromise. Only looking for people who want to work with other A players and be the best at what they do. Core Values of the Company:· Services Customer Above all else· Positive Attitude where we truly enjoy our work.· Independent/Self Directed· Dedicated and Respectful to All· Get Stuff Done CinemaTech’s Core Focus:Our Passion is to build a profitable company with great people and a healthy culture that sells luxury product and services to an ultra-high-net-worth clientele. CinemaTech will support the relocation cost for the ideal candidate. We are looking for someone that currently lives in the Dallas area and wants to relocate to the Fort Lauderdale, FL area after 5 – 7 months of training. Territory: Once trained and relocated to Florida, the primary market will be Florida as well as Mid Atlantic and NE particularly NY, NJ. Key Responsibilities: Design & Technical Work • Produce complete AutoCAD drawing sets (floorplans, elevations, electrical, seating layouts), • Deliver only finished, high-quality work with no shortcuts, • Collaborate with audio video integrators, designers, builders and architects with clarity and confidenceClient Engagement & Sales, • Use a consultative, relationship-driven sales approach, • Communicate clearly with UHNW clients and design professionals, • Guide decisions with expertise, not pressureRelationship Management, • Build and deepen client and partner relationships, • Earn trust through service and consistent follow-through, • Represent CinemaTech with professionalism and polishExecution & Ownership, • Stay organized and focused in a high-velocity environment, • Proactively identify and solve problems, • Operate independently while staying accountable to resultsTerritory Growth & Sales Strategy, • Develop Florida, Mid-Atlantic, and Northeast markets (post-training), • Grow bookings by expanding both current accounts and new partnerships, • Structure deals that benefit all parties: client, integrator, and CinemaTechWho We’re Looking For, • AutoCAD proficiency is required, • Strong design sense with technical drafting ability, • Professional, confident communicator, • Exceptionally organized with strong follow-through, • Emotionally intelligent and intuitive with clients, • Self-motivated and not afraid of the spotlight, • Willingness to relocate to South Florida (relocation support provided), • Ability to travel 1–2 times per month, including short-notice trips Location: To start, the position will office out of our Addison, TX location during the training period and then once in Florida, the position will office out of the CinemaTech Dania Beach, FL Experience Center. When not traveling to clients/site visit our other business roles, you are expected to office at Experience Center. Specific Compensation for Candidate:, • Compensation: Base annual salary, • Monthly Commission based on closed sales, • All legitimate business expenses that are incurred while working will be reimbursed. Any significant expenses (airfare, hotels etc.) should be approved prior to being incurred., • CinemaTech provides PTO, HR Benefits, Retirement Program with matching. See Human Resource Benefits as outlined in CinemaTech Handbook and Benefits Package., • Contract start date to be determined. CinemaTech is an Equal Opportunity Employer committed to fostering a diverse and inclusive work environment.

Job DescriptionDescription: Come join Think Power Solutions - it's a Certified Great Place to Work! Think Power Solutions is a certified Great Place to Work company! This credential was earned based on extensive ratings provided by our employees in anonymous surveys conducted by the Great Place to Work organization - the global authority on workplace culture since 1992. Detailed results of Think Power's Great Place to Work certification can be found here. These employee satisfaction ratings measure Think Power's capacity to earn our own employees' trust and create a great workplace. Thank you for joining us and hope you enjoy your work with Think Power - a certified Great Place to Work. Think Power Solutions currently has job openings for Field Construction Coordinator! If the description below sounds like you, and you want to be part of a fun and growing team, apply today! Seeking Retirees For Field Construction Coordinator (FCC) Electrical Lineman Responsibilities: Responsible for ensuring contract compliance is provided for contractors performing construction on the Owner's electric transmission system. Will ensure work is completed safely and to design specifications. The scope of work will vary from simple upgrades on substations to the construction of new substations. Responsible for identifying and assisting in the resolution of issues that could compromise the success of a project (e.g. design issues, material issues, contractor performance issues, access issues, customer issues). Equal opportunity employer Seeking Retirees For Field Construction Coordinator (FCC) Electrical Lineman About Think Power Solutions Think Power Solutions is a leading tech-enabled infrastructure management solutions provider with highly skilled and dedicated consultants who clients entrust to manage their mission-critical infrastructure. Think Power Solutions was founded with the vision of providing exceptional client service influenced by modern technology to positively impact the utilities, telecom, and construction industries. Think Power Solutions exists to serve its clients, making every effort to understand their needs to produce a high-quality deliverable specifically tailored to meet custom requirements. This client-centric philosophy, creative thinking, and innovative solutions, combined with stellar project execution attracts top industry talent. Think Power Solutions' culture enables its people to deliver industry leading services and products. For more information visit: . Follow us on LinkedIn, Twitter, and FaceBook Seeking Retirees For Field Construction Coordinator (FCC) Electrical Lineman Note to Recruiters, Placement Agencies, and Similar Organizations: Think Power Solutions does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Think Power Solutions employee. Think Power Solutions will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Think Power Solutions and will be processed accordingly. EEO Statement: Think Power Solutions provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Think Power Solutions will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Think Power Solutions, or anyone working on behalf of Think Power Solutions. Requirements: Base Qualifications: • 10+ years of relevant work experience (ie: Transmission/Substation/Journey Lineman)., • Experience working in the Utility industry is a plus., • Leadership/compliance management experience is also a plus., • Proficient at using a computer and Microsoft Office products., • Ability to communicate and work with remote teams.

Job Description HiFyve is hiringa Maintenance Manager in Garland, TX! Pay:$130,000 - $150,000 per year (based on experience) Schedule:Monday - Friday 2nd Shift 1pm - 9pm Benefits: • Competitive wage (DOE), • Paid holidays & vacation, • 4 weeks of PTO starting out, • Company paid for Health, Dental, and Vision Insurance Key Responsibilities: • Team Leadership & Development:, • Manage a plant maintenance team, including planners, parts room coordinators, and multi-craft technicians., • Train, mentor, and develop technicians through structured training programs and career progression strategies., • Maintenance Strategy & Execution:, • Develop and implement maintenance strategies to enhance equipment reliability and reduce downtime., • Oversee the scheduling and execution of preventive and predictive maintenance programs., • Conduct root cause analysis and failure investigations to resolve recurring equipment issues., • Utilize CMMS and data analysis tools to track equipment performance and maintenance history., • Operational Collaboration & Continuous Improvement:, • Partner with plant leadership and operations teams to identify and prioritize maintenance opportunities., • Inspect production machinery to ensure compliance with regulatory and operational standards., • Develop and maintain key performance metrics for reliability and sustainability improvements., • Budget & Inventory Management:, • Develop and manage the maintenance/MRO budget, ensuring cost-effective planning and resource allocation., • Determine spare parts and inventory requirements to support proactive maintenance., • Safety & Compliance:, • Ensure compliance with OSHA safety regulations and food safety guidelines., • Provide training on safe work practices and enforce adherence to company safety policies., • Respond to emergency maintenance situations, including those occurring outside normal working hours. Qualifications: • Education & Experience:, • Bachelor's degree in Electrical, Mechanical, or Reliability Engineering, or 10+ years of equivalent maintenance management experience in an automated industrial setting., • 5+ years of experience with industrial controls programming and troubleshooting (Allen Bradley/Rockwell preferred)., • Technical & Leadership Skills:, • Strong problem-solving and analytical skills, with expertise in root cause analysis and reliability engineering., • Excellent communication and interpersonal skills for collaboration with cross-functional teams., • Proficiency in Microsoft Office, particularly Excel, for data analysis and reporting., • Proven leadership experience managing teams of up to 30 multi-craft technicians and salaried staff., • Background in Food and Beverage manufacturing with Dairy being ideal. If you're interested, apply today!

Job Description POSITION SUMMARY: The Physical Therapist develops and provides physical therapy services to referred patients and serves as a patient advocate in the Therapy Department. JOB-SPECIFIC RESPONSIBILITIES: • Consults, screens, evaluates and treats patients as assigned in inpatient and outpatient settings., • Evaluates patients within two to three working days of physician referral, depending on the level of care., • Develops effective treatment plans for assigned patients., • Supervises the Physical Therapist Assistant (PTA) in direct patient care and patient-related activities. Provide treatments and monitor the progress of assigned patients. Treats patients according to a treatment plan approved by the attending physician., • Communicates with the Director of Rehabilitation (DOR) Services, physicians, and other team members regarding patient progress, problems, and plans., • Participates in necessary patient care conferences and weekly rehabilitation meetings., • Participates in policy and procedure meetings., • Documents treatments and outcomes and all required documentation related to patient care according to accepted regulatory, corporate, and professional guidelines promptly., • Participates in In-Service Training Programs with staff to achieve a high standard of care for all staff., • Records daily treatments and charges concerning department policy., • Establishes and instructs parents/caregivers in patient-specific home exercise programs/maintenance programs., • Participates in discharge planning., • Secures necessary durable medical and adaptive equipment for patients to facilitate independence., • Acts as a clinical preceptor for affiliating Physical Therapy or Physical Therapy Assistant schools., • Communicates and coordinates clinical services/department functions with other departments to achieve cohesion and effectiveness., • Communicates with the Director of Rehabilitation Services regarding department programs, goals, objectives, problems, and successes., • Demonstrates knowledge of Physical Therapy equipment utilized in different procedures, for example, electrical stimulation, traction, ultrasound, whirlpool, etc., • Complies with state regulations and national standards as they apply to the practice of Physical Therapy., • Utilizes resources appropriately and uses/maintains equipment to prolong working life., • Accesses and checks webmail each shift when working to keep informed of current events., • Performs other duties as assigned. POSITION QUALIFICATIONS: EDUCATION: • Licensed by the Physical Therapy Board of Texas., • Current CPR certification., • Attend behavioral management and de-escalation techniques training as required by the facility., • Certification in behavior management or related (SAMA, ABA, PIP, etc.)

Job DescriptionCompany Description Summit Electric Supply is an electrical distributor keeping current with innovative changes in the way our world is powered. With over 40 years of continuous growth in a $110 billion industry, you can count on Summit's stability. Summit will provide the tools you need, along with your commitment to customer service and drive to excel, to have a successful career in electrical supply distribution. Job Description The Automation & Controls Specialist is accountable for the promotion, sale and support of automation equipment and works on a variety of automation projects, as a team member with our technical resources team. This position interacts with clients to understand automation requirements and transform them into effective solutions. • Build relationships with customers, manufacturers, and automation integrators., • Perform detailed product demonstrations so customer can clearly see value and features., • Leverage key relationships as needed to identify emerging needs and solutions., • Determine market segments, identify key target accounts, and execute a strategic sales plan for those accounts., • Identify customer needs, propose solutions, and close orders., • Promote Summit’s value added services in addition to products in competitive situations., • Identify project sales opportunities., • Transform product and service sales opportunities into system sales opportunities when appropriate (Motion Control, VFD’s, Engineered Services, and other automation products)., • Effective listening, communication, negotiation, and consensus-building skills.Qualifications, • Technical background in the electrical industry. Degree in the technical field from an accredited institution or equivalent experience., • 3 years in the electrical industry with experience in sales., • Strong computer skills., • Ability to identify and demonstrate technology solutions for customer applications., • Familiar with process control hardware and software including PLCs, HMIs, Industrial Ethernet Networks, SCADA, and Historian., • Presentation skills for both groups and individuals at all levels of customer organization., • Experience managing complex technical sales process with long sales cycles., • Strong drive for results and self-motivated. Nice-to-Have Experience: • Previous sales experience in an industrial environment with demonstrated ability to develop/drive new business., • PLC programming experience., • SCADA experience, • Telemetry experience., • Variable Frequency Drive experience., • Experience with ERP Systems, preferably SAP. Additional Information Not sure yet if this is the right position for you? Contact a recruiter for more information about the position and how you can jump start your career in a dynamic, growing industry today! Be a part of the Summit Electric family with room to grow and excel! Not sure if this position is right for you? Click here to submit your information to our recruiting team. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are committed to building an inclusive team where everyone feels valued and respected. We encourage applicants from all backgrounds to apply. If you require a reasonable accommodation in the application or hiring process, please contact our lead recruiter at (505) 346-2900 x 1224. Employment with Summit Electric Supply is at-will. This means that either the employee or the company can terminate the employment relationship at any time, with or without cause or notice. Your application and resume will be kept confidential and used solely for the purpose of evaluating your qualifications for this and other potential job opportunities within Summit Electric Supply. Employment is contingent upon successful completion of a background check.

Job Description JOB DESCRIPTION LEAD MAINTENANCE Reports To: Property Manager Job Type: Full Time Hours Per Week: +40 hours GENERAL DESCRIPTION We are looking for a competent Lead Maintenance to properly maintain and keep maintenance of our property up to date. An excellent Lead Maintenance must be reliable and have a great eye for detail. They must have technical skills and knowledge of various crafts such as carpentry, plumbing, electrical, HVAC, etc. Leadership and knowledge of administrative tasks such as scheduling are essential. The goal is to ensure that facilities are always in good and safe condition. Being a team player and having the ability to roll your sleeve up and work with the team is vital. RESPONSIBILITIES AND DUTIES • Inspect facilities periodically to determine problems and necessary maintenance, • Prepare weekly maintenance schedules and allocate work, • Inspect and maintain building systems (heating, ventilation etc.), • Contribute to the development of maintenance budget and ensure compliance, • Monitor inventory of materials and equipment, • Participate in coordination of projects (e.g. renovations), • Ensure adherence to quality standards and health and safety regulations The individual must possess the following knowledge, skills, and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills, and abilities: • 3-5 year of Maintenance Experience, • Proven experience as maintenance supervisor or similar role, • Strong technical knowledge of all building systems (electrical, heating, plumbing, mechanical, etc.), • Knowledge of health and safety practices and regulations, • Understanding of budgeting and performance management, • Excellent planning and leadership abilities, • An eye for detail, • Excellent communication and interpersonal skills, • Professional Certifications (HVAC certified) are preferred

Job Description Commissioning Lead Mechanical - SME - Remote / Traveler - Dallas, TX Our client is an Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Lead the overall mechanical commissioning process, follow standards set by the organization and oversight of multiple commissioning projects for large data center projects. This candidate will act as a Commissioning Subject Matter Expert (SME) to ensure that commissioning experts follow commissioning standards, adhere to a thorough quality management / QC process and procedures that validate and document client's systems. This candidate will also handle any technical commissioning issues for their data center clients. Responsibilities: • Lead multiple Commissioning Projects consists of a full team of commissioning engineers and commissioning project managers on a wide range of Data Center Commissioning projects, • Will not have manage staff at the onset ; candidate will be managing the technical aspect of projects and act as a technical resource commissioning teams, • Will grow into a technical management role with people management in 6-18 month timeframe, • Ensure Commissioning standards are being followed for: Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Ensure that the overall Commissioning process is being followed with the highest of standards:, • Commissioning test procedures and reports, • Commissioning logs, equipment checklist, and other tools to track commissioning projects, • Comprehensive reports which include:, • recommendations for optimizing building operations, • functional checklists, • list of deficiencies, • equipment operation, • maintenance manuals, • Have the team follow Commissioning Standards:, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Functional tests for various building MEP systems, such as: fire alarm and control systems, HVAC, Chillers, CRAC units, normal and standby electrical distribution systems, UPS, standby generators, and emergency lighting, etc., • System Assembly;, • Commission plan preparation, • Follow company QC process and procedures, • Interface with clients, contractors, equipment vendors and owners agents as needed;, • Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • Verification of commissioning results of test reports, • 5 to 10 + years experience in the Electrical / Mechanical Commissioning Field, • Bachelor's / Associates Degree as an Electrical Engineer / Mechanical Engineer a plus, • A/E experience working in complex facilities or mission critical projects, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Experience with Level 1-5 commissioning, • Experience managing commissioning teams and developing plans for large scale commissioning projects, • Experience with IEEE / ASHRAE procedures and protocols a plus, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy Nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.) After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSalary: $22-$25 POSITION: Project Accounting Assistant DWS ENERGY Founded in 2014, DWS Energy is a rapidly expanding, multi-disciplinary electrical construction company focused on electrical pre-fabrication services in our UL-508A certified panel shop, commercial industrial controls wiring, and utility-scale solar and battery storage (new construction and operations & maintenance). The organization has expanded its service offerings throughout its tenure and continues to grow at an accelerated rate. OVERVIEW: The Project Accounting Assistant provides essential support to both the Accounting and Operations by ensuring accurate financial documentation, maintaining organized records, and facilitating smooth project workflows. The ideal candidate is detail-oriented, responsive, and capable of managing multiple priorities in a dynamic environment. DUTIES: The duties and responsibilities of the Project Accounting Assistant mayinclude but is not limited to: • Review vendor invoices for accuracy and compliance with issued Purchase Orders and complete data entry into AP system., • Assist with Certificates of Insurance for clients and from vendors/subcontractors, • Maintain job and accounting folders in SharePoint server storage, • Input contracts, purchase orders, and project budgets derived from the scope of work provided by project management, • Assist with submittal of project start-up and close-out documents requested by client, • Respond to internal and external emails and calls in a timely manner, • Maintain appropriate documentation for procedures and processes, • Manage multiple tasks, projects, and deadlines at the same time, • Backup for other team members, as needed, • Attend team, department, and company meetings and trainings, • Additional support tasks for Accounting and Project Management groups as needed QUALIFICATIONS: The following are required skills and qualifications: • 2+ years of professional related experience in project cost accounting or project administration, • Should have strong computer skills including typing and 10-key and proficiency in Microsoft Word, Outlook, and Excel, • Able to learn new software quickly, • Must be professional and articulate in both verbal and written communication, • Highly organized with keen attention to detail., • Work well within a team REQUIREMENTS: The following are physical requirements: • Prolonged periods of sitting at a desk and working on a computer., • Ability to occasionally lift up to 15 pounds (e.g., files, office supplies)., • Ability to communicate effectively in person, over the phone, and via email. Benefits: The following are our benefits package offered for this role: • Competitive pay up to $22-$25, • Strong benefits package., • Training opportunities Application Process: To apply for the position of Project Accounting Assistant, please submit your resume and a cover letter detailing your relevant experience and qualifications. We thank all applicants for their interest; however, only those selected for an interview will be contacted. DWS Energy is an equal opportunity employer and is committed to diversity, equity, and inclusion in the workplace. We encourage individuals from all backgrounds to apply.

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on-the-job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking Permit Specialists to play crucial role in overseeing the permitting process for obtaining public rights of way and utility pole permits for infrastructure projects, ensuring compliance with relevant laws to achieve permit approvals. They serve as a critical liaison between government entities, utility companies, and construction teams to facilitate smooth and efficient progress of permit approvals within the designated right of way areas. Responsibilities • Receive and enter incoming work from various sources (email, PDFs, paper, FTP sites, customer databases, etc.) into online database software accurately, and within established timeframes., • Manage the preparation of all necessary documentation for permit submissions, including applications, maps, and legal descriptions. Ensure that all permitting documentation is accurate, complete, and in compliance with regulatory standards., • Liaising with governmental agencies, utility companies, and other stakeholders to coordinate right of way activities and ensure compliance with all applicable laws and ordinances., • Maintaining accurate records and documentation of permits, including associated plans and maps, ensuring that all documents are current and properly filed., • Work on multiple permitting projects, ensuring that they progress on schedule, within budget, and in accordance with permit conditions., • Overseeing and managing the processing of permit fees and invoices, ensuring accurate and timely billing, payment tracking, and reconciliation for all right of way permit-related transactions., • Addressing and resolving revisions, conditions, conflicts, or disputes that arise during the permitting approval process., • Assist with the planning and coordination of all Aerial and Under permit activities, ensuring compliance with local, state, and federal regulations. Oversee the development and implementation of strategic plans to acquire necessary permits in a timely and cost-effective manner., • Act as the primary point of contact for internal stakeholders, including government agencies, utility companies, and landowners, to negotiate terms and facilitate the permit acquisition process. Build and maintain relationships to ensure smooth project progression., • Analyze permit data to identify trends, efficiencies, and areas for improvement, and develop ad hoc reports to support decision-making and strategic planning for department management and permitting teams., • Setting up and managing internal projects using workflow management software, ensuring that all necessary tasks are defined, appropriately assigned,and integrated into the project timeline for efficient execution and tracking., • Provide leadership assistance and direction to the permitting teams and other departments, setting clear goals and expectations., • Continuously evaluate and improve permitting processes and procedures. Implement best practices and leverage technology to increase efficiency, reduce errors, and streamline operations., • Other duties or special projects, as assigned. Qualifications • Associate degree in Business Administration or related field preferred., • 5+ Years Experience in Utility Right of Way permitting., • Associate degree in business administration or related field., • National Electrical Safety Code (NESC) Certifications, • Proficient knowledge of O-Calc Pro, NJUNS, ALDEN, Auto CADD software experience., • Proficient knowledge of utility pole infrastructure and the make-ready processes., • Proficient knowledge of Railroad permitting processes., • Proficiency in understanding and applying local, state, and federal right of way regulations and standards., • Proficiency in understanding and applying utility pole regulations and standards., • Ability to manage multiple complex projects, coordinate multiple tasks, and maintain schedules and budgets., • Skilled in negotiating with property owners, public officials, and contractors, and resolving disputes effectively., • Strong analytical skills to assess permit applications, interpret data, and make informed decisions., • Excellent verbal and written communication abilities for clear and concise interaction with various stakeholders., • Familiarity with GIS software, workflow management systems, and other technical tools used in permit coordination., • Meticulous attention to detail in reviewing applications, plans, and legal documents related to ROW/Easements and Pole Owners., • Experience in working in a fast-paced environment with multiple teams, providing guidance and ensuring proper training., • Strong customer service skills to assist applicants and maintain positive relations with the public and other agencies., • Ability to adapt to changing laws, technologies, and environments within the scope of right of way permit management and infrastructure development., • The capacity to effectively prioritize and manage tasks with minimal supervision, maintaining productivity and meeting deadlines in a remote work environment., • Knowledge of cable and fiber optic design and basic construction practices. Shift is full-time Monday – Friday between the hours of 8:30am – 5:00 pm CST. Must be flexible, and willing and able to work outside normal business hours, as necessary. Additional Information • Will require 50% of travel.

Job Description Electrical Engineer III Position Title: Electrical Engineer III Reports To: Director of Electrical Engineering Overview: The Electrical Engineer III is responsible for designing electrical systems across various markets, including mission-critical, telecommunications, commercial, and government sectors. This role involves system design, coordination with multidisciplinary teams, field verification, and mentorship of junior engineers and designers. The position requires expertise in industry-standard software, compliance with codes and regulations, and active participation in project development, from conception to construction administration. Key Responsibilities: * Design electrical systems, including power, lighting, fire alarm, and communications. * Perform site surveys and field verification of existing systems. * Utilize AutoCAD and Revit for design production and ensure compliance with company standards. * Collaborate with internal teams, including production, architectural, and engineering disciplines. * Coordinate with vendors for selecting equipment and fixtures. * Mentor and provide technical guidance to designers and junior engineers. * Assist in developing project specifications, schematic design narratives, and technical reports. * Perform electrical calculations (load analysis, voltage drop, short circuit studies, etc.). * Conduct arc flash studies and develop reports using Easy Power or SKM Powertools. * Review project documentation, ensuring accuracy and adherence to design standards. * Support construction administration, including reviewing RFIs, submittals, and site visits. * Coordinate building service requirements with power companies. * Identify and address design roadblocks, communicating effectively with project managers and leadership. Qualifications: * Bachelor's Degree in Electrical Engineering from an accredited university. * Minimum 7 years of experience in an MEP engineering firm or related field. * Professional registration with NCEES preferred. * Proficiency in AutoCAD, Revit, Bluebeam, Microsoft Office, Easy Power, and SKM Powertools. * Strong understanding of industry-standard and local building codes. * Knowledge of sustainability rating systems such as LEED and WELL. * Ability to work independently throughout the design process. Competencies: * Strong problem-solving and analytical skills. * Ability to manage competing priorities and adapt to shifting project needs. * Effective communication and coordination with internal teams, vendors, and clients. * Commitment to professional development and mentorship of junior staff. * Detail-oriented with a strong focus on quality control and accuracy. Work Environment & Travel: * Hybrid office and fieldwork environment. * Travel up to 10% for site visits and client meetings.

Job Description FDH Aero is a trusted global supply chain partner for aerospace and defense companies. With more than 55 years of experience, it specializes in c-class components that include hardware, electrical, chemical, and consumable products and services for global OEM and aftermarket customers. At FDH Aero, we understand that the strength of our brand comes from our people, and our culture empowers every team member to contribute and grow. As a global team, our culture is rooted in five (5) core values that begin with the words “We are” and include: service-first, respectful, amplifiers, open-minded and accountable. FDH Aero is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero has locations in 14 countries across the globe, with more than 1,200 best-in-industry employees and over 650,000 square feet of inventory space. For more information, please visit the FDH Aero website. FDH Aero is seeking a Data Engineer to join our team and play a vital role in designing, developing, and maintaining scalable data solutions. The ideal candidate should have experience working with SQL, Azure Data Factory, and Microsoft Azure while possessing a strong foundation in ETL (Extract, Transform, Load) processes and data warehousing concepts. They should also be proficient in leveraging Power BI and data visualization to deliver meaningful insights to business stakeholders. Responsibilities: • Architect, build, and optimize scalable data pipelines using Azure Data Factory (ADF), PySpark, SQL, and related Azure services, • Design and implement robust ETL frameworks to ingest and transform data from multiple ERP systems into a centralized enterprise data warehouse (EDW), • Build and maintain medallion-style architecture (Bronze/Silver/Gold) to support scalable and trusted analytics, • Support and enhance the corporate EDW to ensure consistent, reliable reporting across business units, • Implement automated data quality, validation, and lineage checks to ensure reliable ingestion from source systems, • Collaborate with business and IT stakeholders to define data requirements and deliver executive-ready datasets, • Develop semantic models and unified data layers to streamline and standardize reporting logic across teams, • Troubleshot performance issues, pipeline failures, and system bottlenecks, • Contribute to data governance, security, access control, and regulatory compliance efforts, • Mentor junior engineers and serve as technical lead on cross-functional data initiatives, • Maintain comprehensive documentation of technical architecture, data flows, and design decisions, • Perform other duties as assigned Basic Qualifications: • BS/BA in Computer Science or a related field, • 7+ years of proven experience as a data engineer preferred, • Proven success with Azure-based data tools including Azure Data Factory, Data Lake Storage, Delta Lake, and Synapse or Fabric, • Advanced proficiency in T-SQL and PySpark for high-volume data processing and transformation, • Experience building and maintaining medallion architecture in enterprise environments, • Advanced expertise in Azure Data Services, including Azure Data Factory (ADF), Data Lake, Synapse, and Fabric, • Strong proficiency in SQL, PySpark, and database query languages such as SQL/PSM, • Deep understanding of ETL/ELT best practices and dimensional data modeling, • Experience integrating and harmonizing data from multiple ERP systems, • Proficiency in data automation using Python or other scripting languages, • Familiarity with CI/CD, DevOps, and infrastructure-as-code best practices, • Knowledge of database design principles, structures and theories, • Hands-on experience with Power BI and enterprise business intelligence environments, • Strong Understanding of data governance, privacy, and compliance standards (e.g., GDPR, CCPA), • Experience with data quality frameworks and observability tools (e.g., Microsoft Purview, Azure Monitor), • Strong analytical and problem-solving skills, • Proven ability to lead data projects and work independently in dynamic environments, • Strong written and verbal communication skills, including technical documentation FDH Aero is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionRole - Lead Workday Architect ERP, Supply Chain & Financial Systems Key Responsibilities Basic Qualifications • Bachelors degree in Computer Science, Information Technology, or a related field., • 8+ years of experience in designing, implementing, and maintaining ERP, Supply Chain, Financial, and Talent Management systems., • Proven expertise in Workday architecture, with hands-on experience integrating with SAP S/4HANA, Coupa, Primavera P6, Ecosys, and SAP Concur., • Strong understanding of ERP principles, best practices, and system integration methodologies., • Excellent communication and presentation skills, with the ability to lead cross-functional teams., • Hands-on experience with Workday integration technologies such as Workday Studio and Enterprise Interface Builder (EIB). Preferred Qualifications • Masters degree in Computer Science, Electrical Engineering, or a related field., • 12+ years of experience in enterprise architecture, system integrations, and solution design for ERP, Supply Chain, and Financial platforms., • Expertise in leading Back Office platform architecture projects, from design through deployment., • Deep knowledge of Workday integration frameworks and experience with advanced integrations across multiple enterprise applications. This is a remote position.

Job Description Are you passionate about leading high-performing teams and ensuring exceptional electrical service in the residential sector? Our industry-leading company—renowned for home automation, home entertainment, and smart home solutions in Texas—is searching for a motivated and experienced Electrical Field Operations Manager to oversee our growing Residential Service Team. If you thrive in a dynamic field environment and are committed to operational excellence, we want you on our team. Discover a Rewarding Career with Us • Full-time, stable leadership position in the residential electrical service industry, • Competitive salary and performance-based incentives, • Career growth with leadership and management development opportunities, • Access to the latest technologies and industry best practices, • Comprehensive benefits, including health, dental, and vision insurance, • 401k retirement savings plan with company match, • Paid time off (PTO) and paid holidays, • Employee discounts on advanced home technology and solutionsKey Responsibilities for Electrical Field Leadership, • Lead, mentor, and manage a team of field electricians and service technicians specializing in residential service and repair, • Ensure all residential electrical projects and service calls are completed on time, within budget, and according to high safety and quality standards, • Oversee scheduling, dispatch, and resource allocation for the residential service team, • Conduct job site visits to support team members, monitor work, and uphold company standards, • Provide technical guidance, resolve on-site issues, and foster continuous learning, • Collaborate with internal departments to deliver integrated home automation and electrical solutions, • Maintain regulatory compliance with local, state, and national electrical codes, • Develop and implement operational improvements to increase efficiency and customer satisfaction, • Build strong customer relationships by addressing service concerns and ensuring quality outcomes, • Generate and review operational reports to track progress and identify areas for growthWhat We're Looking For in an Operations Manager, • Proven experience supervising or managing teams in the residential electrical service industry, • Journeyman or Master Electrician license (Texas) required, • Comprehensive knowledge of residential electrical systems, troubleshooting, repairs, and best practices, • Outstanding leadership, communication, and interpersonal skills, • Ability to prioritize, problem-solve, and work in a fast-paced environment, • Strong organizational and time-management abilities, • Familiarity with field service management software and reporting tools, • Commitment to safety, continuous improvement, and customer service excellence, • Valid driver’s license with a clean recordQualifications & Experience for Residential Electrical Operations Management, • 5+ years of experience as a licensed electrician, with at least 2 years of people or operations management experience, • Extensive experience in residential service environments; home technology experience preferred, • High school diploma or GED required; additional technical or management certifications are a plus, • Job Type: Full-time management position, • Location: Based in Texas, with travel to local job sites Company Website:

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA United States, Inc. has partnered with a company in Dallas, TX that is a world leading manufacturer of business aircraft with a global network of service centers. They are committed to building their products with the future in mind – making them reliable and more efficient, while contributing to highly favorable operating costs. They masterfully design private jets and signature moments through an extensive portfolio of innovative products. We are looking for skilled A&P Technicians to assist with this client's production needs. The A&P Technician troubleshoots, repairs, inspects and performs maintenance on customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required. Essential Functions: • Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft., • Perform and document work performed per appropriate manuals and regulations as required., • Adhere to Bombardier General Work Requirements for factory, shop and or hangar positions., • Comply with Environmental Health & Safety policies and procedures., • Participate in 5-S activities., • Perform all work in a safe and timely manner., • Operate ground support equipment as required., • Perform mechanical / electrical removals and installations., • Assist with maintenance at off-site locations as needed., • Assist other maintenance disciplines as needed., • Assist with fuel and/or de-fuel of aircraft as needed., • Assist with engine removal / installation as needed., • Assist with aircraft component repair as needed.Requirements:, • You have an A&P certificate, • You typically have a minimum of 0-2 years aircraft maintenance work experience or substantiated equivalent experience, • You have the ability to interpret and work with mechanical engineering drawings, • You have the ability to effectively communicate in both written and verbal form on individual and/or aircraft status, • You have your own basic set of hand tools with the ability to demonstrate Inventory and control of tools, • You have the ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required, • You are able to work unscheduled overtime including nonscheduled work days and holidays, • You are able to work in seasonal/inclement weather outside, • You have the ability to obtain a Security Identification Display Area badge (SIDA), • You have experience on corporate jets (preferred), • You have basic PC skills

Job Description Senior Controls Engineer – Addison, TX (#F0008) Location: Addison, TX Employment Type: Full-Time About Impact Recruiting Solutions: Impact Recruiting Solutions is a specialized recruitment firm connecting top engineering talent with leading industrial automation companies. We partner with innovative firms to match skilled professionals with roles that drive technological advancement and operational excellence. Position Overview: We are seeking an experienced Senior Controls Engineer to lead automation projects for a dynamic industrial automation firm. This role requires expertise in PLC, HMI, SCADA, and DCS/DeltaV systems, along with project management capabilities. The ideal candidate will design, implement, and commission control systems while mentoring junior engineers and ensuring project profitability. Key Responsibilities: • Design and implement control system architectures (PLC, DCS, HMI/SCADA)., • Develop schematics, panels, and network designs (under 480VAC)., • Lead project execution, including budgeting, scheduling, and profitability., • Commission systems on-site and troubleshoot technical issues., • Mentor junior engineers and collaborate with cross-functional teams., • Education: Bachelor’s in Electrical/Control, Mechanical, or Chemical Engineering (or related field), • Licensure: PMP certification a plus, • Experience:, • 8+ years in industrial automation (PLC, HMI, SCADA, DCS/DeltaV)., • 2-3 years minimum with Emerson DeltaV platform., • Experience in PLC-5 to ControlLogix conversions., • Project management for systems up to $10M., • Technical Skills:, • PLC platforms: Rockwell Automation, Siemens, Modicon, • HMI/SCADA: Ignition, FactoryTalk, Aveva, GE iFIX, • Programming: Ladder Logic, Structured Text, VBA, SQL, Python, • Industrial networking: Ethernet/IP, Profinet, Modbus, • Competitive Compensation: Earn an attractive salary, • Comprehensive Benefits:, • Generous Benefits Package, • Work Schedule: Full-time with 25% travel (primarily local), • Professional Growth: Lead high-impact projects and advance your technical and leadership skills, • Impactful Work: Develop cutting-edge automation solutions for industries like Semiconductor, Life Sciences, and Food & Beverage

Job DescriptionJoin Our Team: Field Service Coordinator Open at HomePro Welcome to HomePro, a leading innovator in smart home technology that has been transforming homes with advanced automation, security, and entertainment solutions for more than two decades. Our commitment is to enhance living experiences while providing unparalleled services to our customers. We're located in the heart of Texas, where we continue to lead the industry towards seamless home integration. HomePro is now in search of a highly efficient and communicative Field Service Coordinator to manage the dispatching of our technical and service teams across various locations. If you excel in fast-paced environments and are skilled at coordinating multiple tasks effectively, this position is ideally suited for you! Our benefits include: • Full-time employment opportunity, • Competitive salary with performance incentives, • Retirement plan offerings with company matching, • Use of the on-site fitness center, • Generous Paid Time Off (PTO) and Paid Holidays, • Employee discounts on all HomePro products and services Dynamic Scheduling: Monitor and adjust schedules as needed to accommodate urgent service requests and provide real-time support to field teams. Communication Hub: Serve as the primary communication link between customers, technicians, and internal departments, facilitating updates and information exchange. Resource Management: Allocate resources effectively, considering the complexity of jobs, technician skill sets, and geographic considerations. Documentation and Compliance: Maintain accurate dispatch records and ensure compliance with company policies and regulatory requirements. **Additional responsibilities assigned by the manager Who We Are Looking For: • Proven experience in a dispatch or similar logistical coordination role, ideally in the tech or home services industry, • Exceptional organizational and multitasking abilities, • Strong communication and interpersonal skills, with the ability to calmly resolve scheduling conflicts or concerns, • Knowledgeable in dispatch software and GPS tracking tools, • Commitment to delivering superior customer service Job Type: Full-time We can't wait for you to apply and potentially join our proactive team at HomePro, where we're making home technology more accessible and enjoyable for everyone. TX DPS: B09309 - Fire License: ACR-1757869 M#228511 - Electrical: TECL#32568

Job Description General Responsibilities • Generate accurate and detailed Electrical bids utilizing builder provided blueprints and specifications., • Maintain updated and accurate floorplan-specific proposals., • Keep and maintain up to date records of builder specifications., • Collaborate with the Sales team and the Purchasing department to ensure all requirements are included in each bid to the builder., • Work closely with the Starts department to generate accurate material takeoffs for each new house., • Start to finish project estimation, providing “turnkey” estimates to the sales team and/or the home builders., • Collaborate with Sales, Estimating, Starts, and Production managers to gather all necessary information for accurate bid proposals., • Ensure bid compliance with all local, state, and federal codes and regulations., • Manage multiple bid proposals simultaneously., • Assist other trade (Plumbing and HVAC) Estimating teams in projects as needed. Qualifications • Minimum of 3 years current and specific Electrical estimating experience in new home construction, • Knowledge of Electrical installs, components, and industry standards, • Ability to interpret blueprints and specifications as well as have a general knowledge of the construction industry, • Must be proficient in basic computer skills that include but are not limited to MS Outlook, Excel, vendor portals and company software, • Solid problem solving skills and a willingness to learn company processes and procedures and take on new projects with a “can do” attitude, • Proficient at professionally communicating both verbally and in writing with coworkers, clients, and builders., • Perform the physical demands of the position - working indoors with long periods of time sitting; listening and speaking on the telephone; viewing monitor and workstation Benefits • Medical, dental and vision insurance, • FSA with debit card, • Employer-paid Short-Term Disability (STD), • $20K in life insurance and $20K AD&D insurance, • 401(k) employer match, • Paid Vacation, • PTO, • Paid Holidays, • Annualized reviews for merit increases, • Potential for advancement About L&S Mechanical Headquartered in Richardson, Texas, L&S Mechanical (“L&S”) is a leading tri-trade provider of turnkey plumbing, HVAC, and electrical installation services in the Texas, South Carolina, North Carolina and Georgia residential housing markets. Founded in 1985, L&S serves large production homebuilders in Dallas / Fort Worth, South Dallas, Houston, San Antonio and Austin through its six production warehouses. Previously owned by management, L&S was acquired by The Sterling Group, a leading middle market private equity firm, in September 2021. L&S is the largest plumbing installer in Texas and has significant opportunity to grow its HVAC and electric offerings while also expanding into new geographies through acquisition and growing its nascent home services business. The company is backed by The Sterling Group, a private equity firm established in 1982. The Sterling Group specializes in acquiring controlling interests in companies across the manufacturing, distribution, and industrial services sectors, focusing on enterprises with valuations typically between $100 million and $1 billion. To date, the firm has sponsored 67 platform buyouts, along with numerous add-on acquisitions, contributing to a total transaction value exceeding $22 billion. Currently, The Sterling Group manages over $9.4 billion in assets.

Job DescriptionDescription: Controls and Integrations Engineer Remote National Travel Required – 90 – 100% travel Candidates within a 1 Hour Radius of any International Airports through the continental United States of Americaare encouraged to apply and will be seriously considered Join Reiser as a Controls and Integration Engineer and Make an Impact! Are you passionate about technical problem-solving and providing exceptional customer service? Join a team with over 60 years of success in the food equipment industry, recognized globally for quality, innovation, and unmatched customer support. Reiser is the trusted name for food manufacturers, delivering better, smarter solutions in food processing and packaging. We take great pride in providing the resources our customers need to ensure their success. Our team of talented and passionate professionals works hard, embraces challenges, and is wholeheartedly dedicated to the success of our customers. This customer-centric focus has led to extraordinary growth, and we are now seeking an experienced Controls and Integrations Engineer to support our Service and Development teams. Our Vision • Robert Reiser & Co. will serve the food industry and other selected markets by selling and supporting equipment that provides solutions to customer needs., • Every customer contact will result in an improved relationship with that customer., • We will continuously strive to strengthen our supplier partnerships., • We will encourage our fellow employees to reach their potential. Our Controls and Integration Engineers play a pivotal role in delivering customized food processing and packaging solutions for all types of food manufacturers across the country. In this position you will be interfacing directly with sales, engineering, development and our customers, travelling to their facilities across the United States, and troubleshooting electrical and control systems. You will work on developing new equipment and applications with our Canton-based development and engineering teams. If you're passionate about automation, thrive on solving real-world challenges, and enjoy working closely with customers, this role offers the chance to make a real impact. The person in this role will drive innovation and system integration and play a crucial part of working with high-speed bakery production lines. They will primarily be working with Allen Bradley and helping migrate standard offerings based on a Sigmatek processor then to Allen Bradley specifically for bakery. At Reiser, our mission is to support our sales and service teams, take care of our customers and meet and exceed expectations. We value creativity, collaboration, and technical excellence, and we’re looking for someone who shares that mindset. Job Duties may include but are not limited to: Essential Functions • Work closely with Reiser Engineering, Service, and our customers to understand and troubleshoot systems., • Work with the Reiser Development team on R&D projects and develop solutions within a team-based environment., • Understand how to electrically integrate our equipment into our customer’s manufacturing lines including power requirements, digital signal handshakes, Ethernet interconnects, and PLC programming., • Generate required documentation including manuals, and procedures on new projects., • Train our technicians and customers in the proper use, maintenance, and repair of the electrical and controls systems of our equipment., • Learn and understand how our supplier’s equipment control systems work., • Creative Problem Solver – Able to think quickly and adapt when faced with unexpected challenges in the field, • Strong Understanding of Network Topology – Able to design, interpret, and troubleshoot industrial networks, • Service-Minded Approach – Com – Comfortable with frequent travel, customer-facing environments, and remote troubleshooting, • Experienced Road Warrior – Comfortable with frequent travel, customer-facing environments, and remote troubleshooting, • PLC Configuration & Integration – Upload, download, and configure programs to/from Allen-Bradley PLCs, • Ladder Logic Proficiency – Read, interpret, and modify ladder logic to enhance or troubleshoot machine performance, • Custom PLC Programming – Tailor and adapt PLC code to meet specific customer or application requirements, • Industrial Network Integration – Seamlessly connect production line equipment into existing plant-level architectures, • Ethernet/IP Troubleshooting – Diagnose and resolve issues within existing Ethernet/IP network environmentsRequirements:, • Minimum of 3 years of electrical controls and integration experience., • A bachelor’s degree in electrical engineering or equivalent experience, • Knowledge of processing equipment., • Experience troubleshooting PLC’s (Allen Bradley Preferred), motor controllers, servo controllers, safety devices. Programming required., • Proficient experience interpreting and understanding US and European electrical schematics with AutoCAD and Draftsight., • Ability to communicate effectively with technical and non-technical people via reports, emails and verbal communication., • Strong curiosity and desire to learn new things., • Previous experience with an equipment manufacturer - food industry experience is highly desirable.

Job Description Staff Engineer / Principal Engineer, Electrical Balance of System (EBOS) Reports To: Director of Design Engineering Location: Denver or Dallas Employment Type: Full-Time Travel: 20-50% Position Summary: We are seeking highly experienced and knowledgeable Subject Matter Expert (SME) in the Electrical Balance of System (EBOS) components installed in utility-scale and commercial solar photovoltaic (PV) projects. The ideal candidate will provide deep technical expertise in the design, engineering, and implementation of EBOS components, ensuring system performance, safety, reliability, and cost-effectiveness. Key Responsibilities: • Serve as the technical authority for EBOS components including DC cabling / Harness, AC wiring, Combiner Boxes, Load Breaker Disconnects, Transformers, protection systems, grounding, and communication systems., • Lead and review EBOS designs for utility-scale solar PV systems., • Provide technical input during project planning, procurement, and construction phases., • Ensure EBOS components and designs comply with relevant codes (NEC, IEC, UL), safety standards, and utility requirements., • Support equipment selection, and vendor evaluation., • Collaborate with cross-functional teams including design engineers, procurement, project managers, and construction teams., • Provide troubleshooting support and root cause analysis for EBOS-related field issues., • Bachelor’s or Master’s degree in Electrical Engineering or related field., • Minimum 8–10 years of experience in solar PV systems, with a focus on EBOS design and implementation., • Proven expertise in utility-scale PV projects., • Deep knowledge of applicable electrical codes and standards (e.g., NEC, NFPA 70E, UL, IEEE)., • Strong analytical and problem-solving skills., • Excellent communication and leadership skills., • Professional Engineer (PE) license preferred., • NABCEP certification is a plus., • Familiarity with power system modeling tools (e.g., ETAP, SKM, or similar) is a plus.

Job Description Electrical Commissioning Engineer - Dallas, TX Our client is a Leader in Critical Facilities Assessment and Commissioning Services in the U.S. They provide commissioning, consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, and sustainability when providing these consulting services for Enterprise, Colocation, and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 4-10+ years experience with Electrical Power Systems, • Data Center / Mission Critical experience a must, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, SeaBees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Previous experience working with the Customer a plus, • Strong verbal and written communications skills, • Experience working with various computer systems and applications, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • Willingness to travel, • A/E experience working in complex facilities or mission critical projects a big plus, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Electrical equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description ob description: Position Overview: As a Senior Controls Engineer at TIGERFLOW, you will play a vital role in the design, programming, and support of our advanced packaged pump systems. From concept to completion, you’ll be involved in every stage of the project lifecycle, working closely with sales, production, mechanical, and electrical engineering teams. Your expertise will shape the development of PLCs and HMIs for custom applications, ensuring seamless integration and optimal performance. Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Write and develop code for Programmable Logic Controllers (PLCs) from manufacturers like Schneider, Eaton, and Allen-Bradley. · Create software for Human Machine Interfaces (HMIs) such as Schneider, Red Lion, and Delta. · Configure and program Variable Frequency Drives (VFDs). · Develop solutions that incorporate motors, pumps, valves, and instrumentation into cohesive systems. · Provide technical support to customers and representatives with varying expertise levels. · Conduct site visits for system startups, installations, and troubleshooting. · Maintain precise documentation for control system designs, configurations, and programming. · Serve as a mentor by leading junior engineers and designers · Drive continuous improvement initiatives in control system design and execution Minimum Qualifications: To perform this job successfully, an individual shall have at minimum the qualifications below. · Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechatronics, Automation, or a related field. · Strong understanding of electrical principles, power distribution, and control system calculations. · Experience with controller programming languages (Ladder Logic, Structured Text, and Sequential Function Chart). Preferred Qualifications: To below is a list of preferred qualifications to perform this job successfully. · Familiarity with IEC 61131-3 programming standards. · Understanding of UL 508A control panel standards. · Experience navigating NFPA 70 (NEC) · Proficiency with CAD software, such as Autodesk AutoCAD, or EPLAN. · Knowledge of standard programming languages like VBA, .NET, SQL, or Python.

Job Description PRIMARY FUNCTION Primary responsibilities include providing for the design and technical systems for large, complex projects from schematics through construction administration. TYPICAL DUTIES • Responsible for building system concepts and documentation process from schematics through construction administration phases within the discipline., • It is expected that Level 4 is in regular coordination with Supervisor in project development and performance., • Level 4 Electrical Engineer shall have a proficient knowledge of primary sectors of design including:, • Power Distribution, • Lighting and Controls, • Fire Alarm, • Specification writing and editing., • Energy conservation and sustainability/report technical writing., • Function as Project Discipline Team Leader on large, complex projects when assigned., • Responsible for directing and overseeing project team members within their own discipline. Level 4 is responsible for monitoring and executing team compliance with project budget., • Prepare and monitor project status reports., • Coordinate with Electrical Engineering Discipline Leader in preparing project Man-hour Estimates., • Prepare and document required code research for project., • Participate in the development of the project cost model and design to it., • Develop and maintain Electrical Basis of Design Journal throughout the life of the project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other Project Discipline Team Leaders., • Respond to client questions/requests within 24 hours., • Document interpretation and submittal reviews during bidding and construction administration., • Monitor and mentor staff to produce quality architectural and engineering services within a project team concept., • Mentor support engineers to help prepare them for greater project responsibilities., • Provide regular feedback to the Electrical Engineering Discipline Leader on performance of support engineers., • Identify opportunities to improve quality and services, and participate in the implementation., • Participate in in-house training activities., • Participate in related professional organizations and activities., • Contribute to department discussions on field feedback, lessons learned, new technology or developments encountered., • Bachelor's degree and licensure required., • LEED Accredited preferred., • Minimum six years' experience in A/E industry preferred., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Proficiency in short circuit and selective coordination calculation. Utilization of EDSA, SKM or other analytical modeling software preferred., • Excellent written/ verbal communication and strong organizational skills., • Possess the ability to motivate and mentor staff, and delegate work assignments., • Computer and CADD/BIM literate., • Very detail-oriented, self-motivated, enthusiastic and flexible., • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes. In compliance with all applicable or other employment requirements, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status or status as an individual with disability and arrest and conviction records.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community "We care for our communities", • Integrity "We act with integrity", • Passion "We infuse passion into everything we do", • Quality "We believe quality comes from a culture of innovation and continuous improvement", • Communicate with dispatcher/coordinator to ensure priorities and deadlines are met in both the field and laboratory., • Meet with supervisors of contractors, engineer/architect representatives and/or other project leads on project sites to discuss and coordinate testing, sampling or inspection of construction materials or construction procedures., • Following safety protocols, ensure safe utilization, storage and maintenance of all nuclear gauges and field equipment., • Communicate project progress and delays to supervisor and dispatcher., • Submit accurate and complete testing/inspection reports on a daily basis., • Drive company vehicles to job sites in a safe manner., • High School Diploma or GED required. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is occasionally required to sit, frequently required to stoop, kneel crouch or crawl, regularly required to stand, walk, climb, balance, and talk. Continuously required to use hands and reach. Occasionally required to lift and/or move up to 70 pounds with or without assistance. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision, depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require the employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines and equipment and hand tools such as sledgehammers, shovels and picks. Work assignments are frequently performed outside in all weather conditions. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job DescriptionCompany Description Working at Knobelsdorff Along with building state-of-the-art projects, we build meaningful careers, lasting opportunities, and teams of dedicated individuals who truly own their work. As a leading turnkey specialty contractor specializing in Automation, Electric, Energy, and Power Services, our team tackles challenging, cutting-edge projects that provide opportunities to build new skills, confidence, and gain valuable hands-on experience in a variety of different industries. We tackle industrial electrical installations, advanced automation systems, and renewable energy solutions. Since our founding as a family-owned company in 1988, we've grown while staying true to our core values. Starting your career with Knobelsdorff means joining a culture that values your contributions, moves quickly, takes calculated risks, and celebrates team members who step up and own their work. If you're ready to join a team where your voice matters, your growth is supported, and your impact is celebrated, Knobelsdorff (KE) is the place for you. Job Description You’ll be part of a team that gets things done, works with purpose, and takes pride in the results. Your day-to-day responsibilities may include: • Operate skid steer and assist with trenching, grading, or material movement, • Load and unload tools, equipment, and materials from trailers and trucks, • Support civil work activities including conduit installation and backfilling, • Assist with photovoltaic construction tasks when not operating machinery, • Maintain safe operation of equipment in line with job site standards, • Coordinate with team leads and field personnel for daily work plans, • Travel and work outdoors in various environmental conditions, • Follow KE policies, procedures, and safety expectations, • Support additional duties as needed by project teamsQualifications Qualifications You’re someone who shows up ready to work hard, learn fast, and contribute to a team that takes pride in doing things right. Successful candidates typically bring: • Previous experience operating skid steer equipment, • Experience with civil or solar construction preferred, • Class A CDL preferred, • Familiarity with Microsoft Word, Excel, and Outlook, • Willingness to travel extensively (up to 100%), including overnights, • Ability to pass a pre-employment drug screen and background check, • Valid driver’s license with safe driving record Additional Information Pay Range We believe in paying for the value you bring to the team, and we aim to be competitive in every market we hire in. Pay Range: $25–$35 per hour plus per diem, travel incentive opportunities, and overtime eligibility Prevailing wage may apply depending on project location. Total Rewards Statement As a full-time employee at Knobelsdorff, you'll have access to a comprehensive benefits package designed to support your health, wellbeing, and future. • 100% employer-paid health and dental coverage for employees, • HSA contributions to support your medical expenses, • Company-paid life insurance and disability coverage, • 401(k) with competitive company match, • Profit sharing and performance-based incentives, • Paid weekly with competitive wages, • PTO, six paid holidays, and education reimbursement Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodation may be provided for individuals with disabilities. • Must be able to sit, stand, kneel, stoop, and walk for long periods, • Must be capable of working in hot, cold, or wet conditions, • Must be physically capable of lifting and carrying up to 80 lbs. EEO Statement Knobelsdorff is an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, citizenship, veteran status, or any other protected characteristic under applicable federal, state, or local law. We believe in hiring the best person for the job, period. If you’ve got the skills, work ethic, and mindset to Own It, you’ll find a place here. If you need accommodation during the hiring process, let us know and we’ll work with you. Equal Opportunity Employer, including disabled and veterans. EEO is the Law poster – English – Spanish EEO is the Law Supplement – English – Spanish Pay Transparency Policy Statement – English Knobelsdorff is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. • Equal Opportunity Employer, including disabled and veterans., • EEO is the Law poster English– Spanish, • EEO is the Law Supplement poster English– Spanish, • Pay Transparency Policy Statement English

Job DescriptionDescription: The Slate River Systems’ Senior Controls Systems Engineer will design and implement MHE controls systems. These systems vary in complexity and scope and may include, but are not limited to: Pallet Conveyor, Case Conveyor, Sortation, ASRS and AGVs control, and may interface with Warehouse Control Systems (WCS), Robot Control Systems (RCS), Traffic Management Programs, Supervisory Control and Data Acquisition systems (SCADA). DUTIES AND RESPONSIBILITIES: • Develop standard controls hardware offerings as listed below but not limited to Standard Electrical Drawing Sets; Control Cabinets; Field Enclosures; Scanners, Scales, Profilers; Vision systems; Industrial Ethernet and Machine Communications; and Power Distribution., • Assist Project Engineering with Pre-Sales Support; Lead Hardware and Software Tech reviews; Hardware Design, PLC Software, SCADA Design and Emulation; Field Commissioning; and Final Acceptance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: QUALIFICATIONS – EDUCATION AND/OR TRAINING: • Bachelor’s degree in electrical, or related field with industry experience in controls engineering. EXPERIENCE: • 5+ Years of controls engineering experience directly related to material handling (Case/Poly Conveyor, Sortation Systems, Pallet Conveyor, AGVs, ASRS), • Must have experience with communication to WCS systems, • Experience with Emulation packages such as Emulate3D, • Experience with Industrial Ethernet Applications, • Experience with Power distribution, FLA Calculations, and Efficiency Calculations, • Experience working with cross disciplinary project teams, • Experience with Designing Control Systems and hardware following NFPA and UL, • Experience with Safety Standard such as ISO13849 GENERAL SKILLS: • Ability to travel at least 50% of the time., • Proficient in AutoDesk applications, mainly AutoCAD., • Demonstrable strong expertise with PLC programing in Rockwell Studio 5000 and the ability to work with other PLC platforms such as CodeSys and Siemens.

Job Description Employment Details: • Recognized Civil Infrastructure Consulting firm in the US & Canada, • 100% employee owned, • Full Benefits: Health, Vision, Dental, and 401K match, • Sign on bonus opporunity, • Conduct Electrical engineering services and consulting on low to medium voltage power in Industrial and Municipal facilities, • Responsible for the planing, design management, project management and design management for low to medium voltage systems, • Prepare reports, develop plans, develop P&IDs and specifications for municipal clients, • Bachelor’s degree in Electrical Engineering, • Registration as a Professional Engineer, • 10 - 15 years of experience designing and developing Power Distribution diagrams for low to medium voltage industrial or municipal systems, • Strong experience with design management and project management of Power and Control system projects, • Experience with voltage drop, harmonic distortion, and short circuit currents on small to large scale facilities, • Master’s degree in Electrical / I&C Engineering (+)

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off To be successful in this position you should want to work in the growth phase of a company, have a good understanding of healthcare construction technologies, and be an effective communicator. An outstanding Engineer will have strong interpersonal skills, demonstrate superior technical design skills and be able to create functional, creative, and sustainable designs. Key Responsibilities: • Electrical System Design: Design and implement electrical systems, including power distribution, lighting, emergency power, and low-voltage systems, for healthcare facilities., • Regulatory Compliance: Ensure all designs comply with applicable codes, standards, and regulations, including NFPA, NEC, and Joint Commission requirements., • Equipment Integration: Collaborate with healthcare equipment suppliers and facility planners to integrate medical and diagnostic equipment seamlessly into electrical systems., • Project Management: Manage electrical engineering projects, including planning, budgeting, and overseeing contractors to ensure timely completion., • Testing and Inspection: Perform electrical system testing, troubleshooting, and commissioning to ensure operational reliability and safety., • Energy Efficiency: Develop strategies to enhance energy efficiency and sustainability within healthcare facilities., • Documentation: Prepare and maintain detailed schematics, plans, and reports for all electrical systems and modifications., • Collaboration: Work with architects, mechanical engineers, and healthcare professionals to ensure systems meet functional and patient safety requirements., • Emergency Systems: Design and maintain critical systems, including backup power and uninterruptible power supplies (UPS), to ensure continuous operation during power outages.Work Hours and Benefits, • Bachelors degree in Electrical Engineering or a related field., • Professional Engineer (PE) license preferred., • 5+ years of experience in electrical engineering, with at least 2 years in healthcare settings., • Proficiency in electrical design software (e.g., AutoCAD, Revit, or similar)., • Strong knowledge of NEC, NFPA 99, and NFPA 70 standards., • Experience with healthcare-specific systems, such as nurse call, fire alarms, and medical imaging equipment integration., • Familiarity with renewable energy and energy-efficient solutions in healthcare settings., • Strong analytical, problem-solving, and communication skills., • Experience with hospital construction or renovation projects is preferred., • Knowledge of facility management systems and Building Information Modeling (BIM) is preferred., • Familiarity with infection control protocols during construction and maintenance is preferred.Company Fit at Imagine Unlimited: At Imagine, we foster leadership, comradery, and encourage employees to overachieve. We believe in driving positive results and continuous improvement through creative collaboration. Nobody is above the team at Imagine and everyone must take pride in helping their teammates deliver quality outcomes for our stakeholders in the Healthcare vertical. At Imagine, we have a passion for producing creative solutions to complex challenges that are pervasive in the renovation of spaces surrounding patient-based technologies. Every employee is held accountable for the expectations set forth by a culture based on the principle of meritocracy, not mediocrity. We expect a lot of each Imagine employee and we believe in rewarding that expectation accordingly. We like a challenge here at Imagine, do you?

Job DescriptionPosition Overview We are seeking a Senior Electrical Engineer to lead the design and development of electrical systems for both new construction and renovation projects, with a focus on mission-critical facilities. This role involves managing multi-discipline projects, ensuring high-quality, code-compliant designs, and providing technical leadership to the electrical engineering team. The ideal candidate will bring expertise in system design, project coordination, and client collaboration to deliver projects on time, within budget, and to the highest standards. Key Responsibilities * Lead the electrical discipline on assigned projects, ensuring design accuracy, quality, and adherence to schedules and budgets. * Collaborate with clients to identify project goals, constraints, and success criteria. * Develop innovative and practical design solutions, weighing performance, cost, and implementation considerations. * Produce and review design documentation, including conceptual designs, equipment selection, construction drawings, specifications, and energy modeling. * Coordinate with other engineering disciplines to ensure a fully integrated and constructable design. * Oversee client expectations, providing clear and timely communication throughout the project lifecycle. * Serve as the Owner’s representative during construction phases, reviewing submittals, responding to RFIs, and conducting site inspections. * Mentor and guide junior engineers and designers to develop their technical expertise and leadership skills. Qualifications * Experience: 6+ years in the MEP industry, with significant experience in electrical system design. * Education: Bachelor of Science in Electrical Engineering (or higher). * Licensing: Professional Engineering License (or the ability to obtain in the near future). * Proven track record leading multi-discipline project teams. * Strong organizational, communication, and problem-solving skills. Preferred Skills * Proficiency with Revit and other electrical design software. * Experience with mission-critical facility projects. * Commitment to delivering innovative and community-focused engineering solutions.

Job Description Hazen and Sawyer is seeking a candidate to provide electrical engineering and design for water and wastewater facility projects. • Qualified candidate should have knowledge in industrial power design, including medium and low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities., • Candidate should have a good working knowledge of the NEC and related Codes., • Candidate must also have good communication skills, including interaction with clients and contractors., • Candidate will serve as the lead electrical engineer on projects for water and wastewater facilities. Responsibilities include supervision of less experienced staff working on projects, and interaction with clients and engineers from other disciplines., • AutoCAD experience is a must, Revit BIM software and SKM power systems software is desirable., • Experience with instrumentation and control systems is a plus, including field and panel instruments, operator interfaces, and PLCs. Professional Engineering License is required., • 5-10 years in electrical engineering and design and a Bachelor of Science in Electrical Engineering are required.

Job DescriptionCompany Description ABOUT STREAM REALTY PARTNERS Founded in 1996, Stream Realty Partners (Stream) began with a vision. Not one focused on bricks and mortar, but with people at its foundation. With 215+ million square feet of assignments and more than $5.8 billion in annual transactions, we are one of the fastest-growing, full-service commercial real estate services organizations in the country. We’ve grown from our two original partners to 1,400+ talented individuals that come together to create our distinct culture, best summarized by our firm’s core values: smart, honest, nice, and passionate. More information on the firm is available on the website: . IMMEDIATE IMPACT. MEANINGFUL CAREER. At Stream, we know our success begins and ends with our people. It’s the reason we work hard to attract and retain the best and brightest talent. From day one, you will be an integral member of our high-caliber, collaborative team. We will empower you to apply your energy, expertise, and creativity to meet our clients' needs while instilling you with unsurpassed market knowledge and development opportunities to succeed. When you join Stream, you won’t simply start a new job—you will build a meaningful and impactful career. Job Description POSITION OVERVIEW The Chief Engineer is responsible for planning, implementing, coordinating, and supervising all mechanical operations, maintenance, communications, energy management, and manpower development programs for assigned properties. RESPONSIBILITIES • Supervise Engineers and maintenance staff, including hiring, training, personnel development, etc., • Manage operational accounts for building as required and assist in the development of operating and capital budgets., • Assist in maintenance/engineering issues as required., • Recommend/implement improvements for the preventive maintenance program on an ongoing basis., • Develop/maintain effective building-specific maintenance and safety procedure manuals and enforce compliance., • Coordinate maintenance efforts with outside contractors, tenant finish personnel, and engineers., • Oversee all building systems, including fire/life safety, plumbing, HVAC, and electrical issues; must remain current with the latest HVAC technology trends., • Maintain ongoing communication with tenants, owners, property management, and vendors., • May assist in the solicitation and acquisition of new management contracts., • Develop/maintain as-built drawings., • Respond quickly to emergency situations (i.e., fire, evacuation, equipment failure, etc.) and customer concerns., • Implement and administer inventory control programs/purchase parts and supplies., • Develop specifications and assist in the solicitation and administration of maintenance/repair service contracts., • Ensure compliance with applicable codes, requisitions, government agencies, and Company directives as relates to building operations. Qualifications, • High School diploma or GED equivalent, • 5+ years of related work experience, depending on the size of the property., • Operating Engineers license (SMA) or equivalent., • Must be certified as a Universal Technician for CFCs or within 90 days of employment. Additional Information Once you have completed your application, you will receive an email from with a link to the “C-Job Name” Culture Index survey which will help us gain a better understanding of your strengths and motivational drives. We kindly request that you set aside 10 uninterrupted minutes within 48 hours of your submitting your application. #LI-Onsite, #LI-Hybrid, or #LI-Remote Stream is an equal-opportunity employer and does not discriminate on the basis of ethnicity, race, religion, sexual orientation, gender identity, age, national origin, disability, military status, or any other reason prohibited by law. Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Stream Realty Partners offers competitive salaries, bonuses, medical/dental/vision insurance, pharmacy benefits, health savings account, flexible spending accounts, 401(k) plan with company matching, PTO, and holiday pay. Individual compensation packages are based on various factors unique to each candidate, including skill set, experience, qualifications, location, and other job-related reasons. Stream is an equal-opportunity employer and does not discriminate on the basis of ethnicity, race, religion, sexual orientation, gender identity, age, national origin, disability, military status, or any other reason prohibited by law. Stream Realty Partners offers competitive salaries, bonuses, medical/dental/vision insurance, pharmacy benefits, health savings account, flexible spending accounts, 401(k) plan with company matching, PTO, and holiday pay. Individual compensation packages are based on various factors unique to each candidate, including skill set, experience, qualifications, location, and other job-related reasons. To apply for a position, please visit our website at

Job Description About Company: Our Mission at Choice is to enhance the life of every patient we serve in the pursuit of delivering excellent healthcare. We've worked diligently to shape the culture of the company in how we lead and work daily. As leaders, employees, clinicians, and support staff we strive to apply the Pillars of Choice every day. About the Role: The Physical Therapist Assistant (PTA) plays a critical role in supporting licensed physical therapists in delivering high-quality rehabilitative care to patients recovering from injury, surgery, or managing chronic conditions. This position involves implementing treatment plans designed by physical therapists, monitoring patient progress, and adjusting therapeutic activities to optimize recovery outcomes. The PTA works closely with patients to improve mobility, reduce pain, and restore function through therapeutic exercises, manual therapy, and the use of specialized equipment. Effective communication with patients, families, and the healthcare team is essential to ensure coordinated care and patient education. Ultimately, the PTA contributes significantly to enhancing patients' quality of life by facilitating their return to daily activities and independence. Minimum Qualifications: Responsibilities: • Assist physical therapists in executing individualized treatment plans for patients with various musculoskeletal and neurological conditions., • Conduct therapeutic exercises, manual therapy techniques, and modalities such as ultrasound or electrical stimulation under the supervision of a physical therapist., • Monitor and document patient responses to treatment, reporting progress and any concerns to the supervising physical therapist., • Educate patients and their families on exercises, proper use of assistive devices, and strategies to prevent injury or re-injury., • Maintain a safe and clean treatment environment, ensuring all equipment is properly sanitized and in good working order. Requirements * Successful completion of accredited physical therapy program and state licensure exam. * Valid Physical Therapy Assstant license * Valid state driver’s license * 1 year of home health experience preferred * AHA CPR certification * Valid Driver’s License * Valid Auto Insurance * HomeCare HomeBase experience preferred Physical Demands * Must be able to stand, walk, sit, climb, crawl, squat, or kneel for extended periods. * Must be able to lift, carry, pull, or push up to 100 lbs.. Benefits and Perks * Medical, Dental, Vision Insurance * 401k with company percentage match / vested * Health Savings Account * Life Insurance * Short & Long Term Disability Insurance * Paid Time Off * Paid Holidays

Job Description Senior Embedded Hardware Design Engineer Applied Concepts, Inc. - Richardson, Texas Senior Embedded Hardware Design Engineer - Job Overview: Applied Concepts has an exciting opportunity at our Richardson R&D facility, where you will be contributing to our Intelligent Traffic Systems and Speed Enforcement product lines. You will help leverage our 48 years of technology expertise in Radar, Lidar, and traffic safety to provide our customers with advanced, connected, real-time information systems that deliver value ranging from optimized traffic patterns to life-saving hazard avoidance and speed enforcement. In this role, as a Senior Embedded Hardware Design Engineer, you will provide technical leadership for product development projects from a hardware perspective. You will work with a cross-functional team of experts to deliver innovative solutions spanning the entire product development life cycle, from planning and architecture development to production hand-off and continuous improvement activities. You must demonstrate excellent communication skills and be able to thrive in a fast-paced environment where today's collaboration and innovation drive tomorrow's successes. Senior Electronics Design Engineer - How you'll make an impact: • Provide technical leadership to the project team, driving technology implementation while ensuring high level objectives and milestones are met. Coordinate with cross functional resources to action and complete technical tasks., • Contribute and influence new ideas that expand markets and product lines., • Design high-performance, low-power edge computing platforms that combine the latest technologies in ARM SOCs, networking, camera systems, and AI-assisted analytics algorithms., • Design cutting-edge products that combine our expertise in microwave radar systems, optical lidar systems, and our cloud-based analytics platforms to deliver unique and high-value functionality to our speed enforcement and intelligent traffic systems customers., • Interface with Manufacturing, Quality Control, and Customer Service to provide technical product insights into new and existing products., • Stay technically abreast of emerging technologies, techniques, and methodologies to support an inventive environment. Senior Electronics Design Engineer - What you'll need to succeed: • 7-10+ years of experience in high-level hardware architecture design and development, with an emphasis on embedded systems for harsh/outdoor environments., • Proficient knowledge of and implementable experience with various bus communication protocols., • Proficient knowledge of and implementable experience with various wireless technologies., • Experience in supporting production testing and maintenance of embedded systems., • Experience in working with cross-functional teams and providing system-level support., • Proficient CAD skills., • Proficient design analysis skills., • A comprehensive, broad knowledge of product development and system integration., • Ability to mentor and/or supervise technical staff, as needed., • Develop relationships with key suppliers., • Ability to fearlessly solve problems in any engineering discipline - through others, if necessary., • A four-year Engineering degree is required; a master's degree in engineering or computer science is an advantage., • Highly desirable: working knowledge of embedded firmware and DSP's and direct experience in developing high performance, low-power Linux based computing platforms. Senior Electronics Design Engineer - What you'll gain: • Competitive compensation and benefits, • Rewards and recognition programs, • Immersive learning and development opportunities, • Convenient office location, • Flexible vacation policy, • Excellent work/life balance, • Great culture and collaborative environment Who we are: Applied Concepts is a 48-year-old, 250-person privately owned company, located in Richardson, Texas. Founded in 1977 by an electrical engineer, we have a long history of profitable, organic growth. Our company remains entrepreneurial at heart, constantly re-inventing ourselves with new products and new markets, but still balanced with business prudence. We manufacture our own products, in our own facilities. Integrating our product development with our own manufacturing resources is a key part of our business culture, keeping us nimble and able to provide high quality products. What we do: We focus on designing, manufacturing, and selling products that promote public safety. We are the number one supplier of speed enforcement products to law enforcement in the United States. Our employees take pride in the quality of our products and the service we provide in keeping our streets and neighborhoods safe. We offer a variety of engineering challenges, from microwave to high-speed lasers, to image capturing and processing, and LED speed calming devices. To learn more about us and apply for the position, please visit: We are looking for full-time employees. U.S. Citizenship or U.S. Permanent Resident (Green Card) required. Sorry, NO Sponsorship for U.S. visas (no H-1B, etc.). Only qualified candidates selected for an interview will be contacted.

Job Description Overview Pay: $18-$20 per hour + commission Earning potential: $20 – $30/hour on average with commission Schedule: Wednesday-Sunday Location: Mesquite, Tx Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities Work inside a national retail home improvement store engaging customers in friendly conversations about HVAC upgrades, air quality enhancements, and energy efficiency. Your goal is to schedule free in-home consultations with our experienced comfort advisors. Qualifications What You Need: • Willingness to approach and engage retail shoppers, • Friendly, outgoing personality; sales experience a plus, • Ability to stand/walk for up to 6 hours during shift, • Reliable transportation to/from assigned store, • Minimum age: 18 years, • Available for weekend retail hours (some holidays required), • Clean, professional appearance to represent the ARS brand, • Ability to attend weekly in-office meetings, • Must pass background check Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Job Description Responsible for developing national program-level electrical design solutions directly with clients, while managing the electrical project design team from schematic design through construction administration. You will also provide leadership and mentorship to engineering staff within the electrical discipline. TYPICAL DUTIES: PROJECT RELATED Knowledge • Extensive experience in mission critical/data center electrical systems, including medium and low-voltage power distribution, emergency power systems (UPS, generators), and branch circuitry., • Experience engaging and advising clients on critical infrastructure design and performance goals., • Strong understanding of electrical redundancy, reliability, and scalability in high-availability environments., • Familiarity with sustainable design approaches, energy efficiency, and system commissioning., • Ability to research and apply national electrical codes (NEC, NFPA, IEEE, etc.) across U.S. jurisdictions., • Lead and oversee electrical project team members., • Monitor and guide staff to ensure a high-quality client experience as part of an integrated design team., • Ability to review, interpret, and respond to RFPs within short timeframes., • Participate in client interviews and business development presentations., • Create and drive the electrical design process from schematics through construction administration, including preparation and maintenance of discipline work plans., • Participate in early-stage design charrettes to identify challenges and opportunities., • Develop and document electrical system concepts, including one-line diagrams, load calculations, and panel schedules., • Prepare and maintain an Electrical Basis of Design Journal throughout project lifecycle, including applicable code research., • Conduct product and material research to support design intent., • Act as electrical discipline lead on assigned projects., • Coordinate with other discipline leads to ensure comprehensive, high-quality deliverables., • Attend client meetings and represent HED as necessary., • Respond promptly to client inquiries and support construction administration activities such as RFIs and submittal reviews., • Actively engage in a collaborative, integrated team environment., • Mentor support engineers and designers, guiding their professional growth., • Participate in refining and improving internal standards, workflows, and documentation., • Provide performance feedback and foster a culture of learning and recognition., • Contribute to in-house training programs and knowledge-sharing efforts., • Represent HED in industry-related organizations, technical panels, and conferences., • Bachelor’s degree in Electrical Engineering (required)., • Professional Engineering (PE) license or ability to obtain within 1 year., • Minimum of 10 years' experience in the A/E industry, with significant focus on mission critical/data center work., • Extensive knowledge of electrical design services from conceptual design to project closeout., • Skilled in Revit and other electrical design tools., • Familiarity with short circuit, arc flash, and coordination studies (e.g., SKM or ETAP)., • IES-VE modeling experience preferred., • LEED Accredited Professional preferred., • Strong written and verbal communication skills., • Demonstrated leadership, delegation, and team development capabilities., • Strong organizational and planning skills., • Ability to travel to and from project sites for meetings and field assessments., • Capability to perform site observations and evaluations., • Proficient with tools used for documentation and communication., • Adequate visual acuity for detailed design and documentation tasks. #LI-DD1

Job DescriptionPosition Overview We are seeking a skilled Electrical Engineer to join our team and contribute to the design and development of building systems across a variety of projects. This role offers the opportunity to work on innovative solutions, collaborate with multidisciplinary teams, and ensure designs meet industry standards, building codes, and client expectations. Key Responsibilities * Assist in the design and development of electrical systems for building projects, ensuring compliance with applicable codes and standards. * Prepare and review drawings, specifications, and other design documents. * Coordinate with architects, mechanical engineers, and other disciplines to ensure integrated project delivery. * Conduct calculations, load analyses, and system layouts for electrical systems. * Support senior engineers in managing schedules, budgets, and client communications. * Participate in site visits and field inspections as needed to verify design implementation. Minimum Qualifications * Bachelor’s degree in Mechanical or Electrical Engineering. * Successful completion of the Fundamentals of Engineering (FE) Exam. * Certified as an Engineer-in-Training (EIT) by the State of Texas. * Strong communication, organizational, and time management skills. Preferred Qualifications * Licensed Professional Engineer (PE) in the State of Texas. * Previous experience in the design of standard mechanical or electrical systems for buildings. * Experience working in an MEP consulting environment. * Excellent knowledge of applicable building codes.

Job Description Job Title: Substation Applications Engineer Job ID: 81809 Location: Dallas, Texas (remote applicants considered) Overview: This is a customer-facing engineering role requiring experience in field testing, commissioning, and diagnostics for low, medium, and high-voltage cables as well as substation equipment (transformers, circuit breakers, CTs, PTs, switchgear, batteries, etc.). Responsibilities: * Provide technical support and training on cable and substation test equipment (onsite, virtual, and phone) * Validate and test new products; provide feedback to engineering teams * Assist in product development and design discussions * Represent the company at industry conferences, client meetings, and marketing events * Create technical content (white papers, application notes) * Present technical case studies and training materials to varied audiences Required: * Bachelor’s degree in Electrical Engineering (Master’s preferred) * 3–5 years of hands-on field experience in substation testing, cable testing, and fault location * Strong understanding of cable systems, accessories, substation design, and maintenance procedures * Familiarity with standards: IEEE, NETA, IEC, NERC * Strong communication skills – must be able to present to engineers, managers, and technicians * 50% travel required * Proficiency in Windows OS, PC hardware/software interfaces, and Microsoft Office * Highly self-driven with a customer-first attitude

Job Description A growing electrical contractor in the DFW area is seeking a Senior Electrical Estimator to join their team. This company has a strong reputation for quality work and a steady pipeline of projects. They are looking for an experienced estimator who can take ownership of the bidding process and play a key role in driving continued growth. Responsibilities * Prepare accurate cost estimates for commercial and industrial electrical projects * Review project plans, specifications, and proposals to determine scope and requirements * Develop material and labor take-offs with detailed breakdowns * Collaborate with project managers, engineers, and vendors to ensure competitive bids * Identify cost-saving opportunities and value engineering options * Manage multiple bids and deadlines simultaneously * Mentor junior estimators and contribute to process improvements Qualifications * 7+ years of electrical estimating experience (commercial/industrial focus preferred) * Strong knowledge of electrical systems, codes, and construction practices * Proficiency with estimating software and Microsoft Office Suite * Ability to read and interpret blueprints and technical drawings * Excellent organizational and communication skills * Proven ability to manage deadlines in a fast-paced environment Compensation & Benefits * Competitive salary, commensurate with experience * Comprehensive benefits package (medical, dental, vision, 401k with company match, PTO, and paid holidays) * Opportunities for career growth with a rapidly expanding contractor * Supportive, team-oriented work culture Why This Opportunity This is a chance to join a growing contractor in the DFW market and make an immediate impact in a senior role. If you’re a skilled electrical estimator looking for the next step in your career, this could be the right fit. Company DescriptionAt Talent Corps, we’re committed to Strengthening America’s Workforce by connecting top talent with the skilled trades and industries that keep our country moving. We provide strategic staffing solutions that help businesses grow and help tradespeople build lasting, fulfilling careers. With a focus on integrity, results, and long-term partnerships, our team brings deep industry expertise and a people-first approach to every hire. Whether you're building your crew or advancing your career in the trades, we’re here to support your success and the future of the American workforce.At Talent Corps, we’re committed to Strengthening America’s Workforce by connecting top talent with the skilled trades and industries that keep our country moving. We provide strategic staffing solutions that help businesses grow and help tradespeople build lasting, fulfilling careers. With a focus on integrity, results, and long-term partnerships, our team brings deep industry expertise and a people-first approach to every hire. Whether you're building your crew or advancing your career in the trades, we’re here to support your success and the future of the American workforce.

Job Description About Us We are a leading innovator in designing high-performance Printed Circuit Boards (PCBs) for the Semiconductor Automated Test Equipment (ATE) market. Our cutting-edge solutions power the testing and validation of semiconductor devices, enabling our clients to deliver reliable, high-quality products to the global market. We are seeking a talented and experienced PCB Designer to join our dynamic team and contribute to our mission of excellence in PCB design. Job Overview We are looking for a skilled PCB Designer with expertise in Cadence Allegro to support the development of complex, high-density PCBs for semiconductor ATE applications. The ideal candidate will have a minimum of 5 years of hands-on experience in PCB design and a proven ability to coordinate design activities with global teams. This role requires strong technical proficiency, excellent communication skills, and robust project management capabilities to ensure seamless collaboration with our overseas design resources. Key Responsibilities • PCB Design and Development: Utilize Cadence Allegro to design, layout, and verify high-density, multi-layer PCBs for semiconductor ATE systems, ensuring compliance with performance, signal integrity, and manufacturability requirements, • Design Coordination: Collaborate with overseas design teams to align on project goals, timelines, and deliverables, ensuring consistency and quality across all design phases., • Project Management: Lead and manage PCB design projects from concept to production, including defining project scopes, setting milestones, and tracking progress to meet deadlines and quality standards., • Technical Expertise: Perform schematic capture, component placement, routing, and design rule checks (DRC) to meet stringent ATE specifications, including high-speed signal integrity and power integrity requirements., • Cross-Functional Collaboration: Work closely with hardware engineers, test engineers, and manufacturing teams to ensure designs meet functional, thermal, and reliability requirements., • Documentation and Communication: Create detailed design documentation, including BOMs, fabrication, and assembly drawings, and communicate effectively with internal and external stakeholders to resolve design issues., • Proficiency in Cadence Allegro PCB Designer (version 17.x or higher preferred)., • Experience designing high-density, multi-layer PCBs for high-speed and mixed-signal applications., • Knowledge of signal integrity, power integrity, and EMI/EMC considerations in PCB design., • Familiarity with PCB manufacturing processes, DFM (Design for Manufacturability), and DFA (Design for Assembly) principles., • Project Management: Demonstrated ability to manage multiple design projects simultaneously, with a track record of delivering projects on time and within specifications., • Communication Skills: Excellent verbal and written communication skills, with the ability to coordinate effectively with global teams across different time zones., • Collaboration: Proven experience working with overseas design resources, including managing workflows, resolving conflicts, and ensuring clear communication., • Experience in the semiconductor ATE industry or related fields (e.g., RF, mixed-signal, or high-speed digital design)., • Familiarity with additional PCB design tools such as Altium Designer or Mentor Graphics., • Knowledge of industry standards such as IPC, JEDEC, or MIL-SPEC for PCB design and manufacturing., • Experience with simulation tools for signal and power integrity analysis (e.g., HyperLynx, Sigrity)., • Innovative Environment: Work on cutting-edge PCB designs that drive advancements in the semiconductor ATE industry., • Global Collaboration: Engage with a diverse, global team of engineers and designers to deliver world-class solutions., • Career Growth: Access opportunities for professional development and career advancement in a fast-paced, technology-driven company.

Job Description Company Description Counsel Engineers, established in early 2017, is committed to delivering hands-on, high-quality design that meets clients' expectations. The company focuses on growing talent and consistently delivering outstanding design. Additionally, Counsel Engineers builds and maintains long-term partnerships within the design community and aims to be the go-to MEP Firm. Role Description This is a full-time on-site role for an Electrical Engineer, EIT at Counsel Engineers, LLC, based in Dallas, TX. The Electrical Engineer, EIT will be responsible for electrical design work, including developing power distribution and power systems designs. Day-to-day tasks include creating and reviewing electrical plans, conducting necessary calculations, and working collaboratively with other engineers and clients to ensure project success. Qualifications • Knowledge and experience in Electrical Design and Electrical Engineering, • Understanding of Electricity, Power Distribution, and Power Systems, • Strong problem-solving and analytical skills, • Ability to communicate effectively with team members and clients, • Experience with design software and tools, • Bachelor's degree in Electrical Engineering or related field, • Engineering-in-Training (EIT) certification or eligibility for certification Our talented staff of engineers and designers at Counsel Engineers, LLC. all share in our commitment to provide each client with direct access and personal attention. Our goal is to form long-term relationships with each client by implementing appropriate design solutions that are responsive to time and budget. Counsel Engineers, LLC. supports this effort through controlled growth, quality assurance, process improvement, and by providing the team with state-of-the-art equipment.WHAT WE DO\r\nLocated in Dallas Metroplex, our firm offers Mechanical, Electrical, and Plumbing Engineering design services to K-12 Educational Facilities, Universities, Government, Medical, Hospitality, Industrial, Corporate Office and Interior Finish-out. We provide building design services from master planning through construction administration, as well as provide Peer Reviews and Building Commissioning.\r\n\r\n\r\n\r\nOur talented staff of engineers and designers at Counsel Engineers, LLC. all share in our commitment to provide each client with direct access and personal attention. Our goal is to form long-term relationships with each client by implementing appropriate design solutions that are responsive to time and budget. Counsel Engineers, LLC. supports this effort through controlled growth, quality assurance, process improvement, and by providing the team with state-of-the-art equipment.

Job Description Engineering department of rapidly growing custom foodservice equipment manufacturer seeks 3D Sheet Metal Designer (Solid Edge) for an entry level position. RESPONSIBILITIES: • Analyze drawings and specifications to produce custom foodservice equipment using Solid Edge 3D solid modeling software, • Modifying existing designs as required to meet customer specified requirements, • Produce drawings, specifications, diagrams, and supporting documentation for manufacturing foodservice equipment Required Qualifications: • Experience using Solid Edge or similar 3D solid modeling software creating parts and large assemblies - Solid Edge experience a must, • Experience in placing parts correctly into large 3D assemblies, • Well versed in creating fabrication and assembly drawings for producing equipment, • Knowledge of sheet metal fabrication, • Experience in design and manufacturing food service equipment a major plus and is considered for higher compensation range, • Electrical and Refrigeration knowledge a plus, also considered for higher compensation range, • Ability to communicate build method, bilingual a plus

Job Description Chief Estimator – Electrical – Data Center, Healthcare, Industrial, Education Dallas, TX | Leadership Role | $170k - $180k + Full Benefits Lead With Precision. Build With Purpose. We're seeking a Chief Estimator to lead preconstruction efforts on complex and high-profile electrical construction projects. This is an exciting opportunity for a seasoned professional who excels at turning scope into strategy, numbers into confidence, and estimates into successful projects. You'll play a critical role in shaping the front end of multimillion-dollar commercial projects by leading a talented estimating team, ensuring accuracy, consistency, and strategic alignment across all bids and proposals. Your expertise will directly impact project profitability, timelines, and client satisfaction. What You'll Be Responsible For • Lead the preparation of detailed and accurate electrical estimates for large-scale commercial and industrial projects, • Develop conceptual and preconstruction budgets, labor estimates, and bid strategies, • Oversee the preparation of project-specific checklists, submittals, and preliminary billing schedules, • Analyze drawings, specs, and scope documents to determine key cost drivers and risks, • Review and evaluate subcontractor and supplier bids for completeness, competitiveness, and compliance, • Leverage estimation software and data to forecast labor and material costs, • Conduct risk assessments and value engineering to ensure competitive, profitable bids, • Present estimates and cost strategies to executive leadership and clients, • Maintain and grow relationships with vendors, subcontractors, engineers, and field teams, • Collaborate with project managers to support handoffs, schedules, manpower planning, and change orders, • Mentor junior estimators and continuously improve department processes and accuracy What Makes You a Strong Fit • 7–10 years of experience in electrical estimating, preferably on large commercial or mission-critical projects, • Proven leadership experience managing estimating teams and overseeing multiple bids simultaneously, • Deep understanding of construction drawings, specifications, and industry best practices, • Proficiency in estimating software (Accubid, Bluebeam, Trimble, or equivalent) and Excel, • Strong analytical and critical thinking skills with a focus on detail and accuracy, • Bachelor's degree in Construction Management, Engineering, or a related field (or equivalent experience) This is more than a job — it's an opportunity to lead the estimating function for one of Atlanta's most respected electrical contractors, known for tackling complex projects across data centers, healthcare, higher education, and commercial sectors. You'll join a collaborative, forward-thinking leadership team that values accuracy, innovation, and integrity. Compensation & Benefits • Competitive Base Salary + Bonus Potential, • 401(k) with Company Match, • Comprehensive Medical, Dental & Vision Insurance, • Health Savings Account (HSA) & Flexible Spending Account (FSA), • Company-Paid Life & Disability Insurance, • Generous Paid Time Off & Holiday, • Parental Leave, • Tuition Reimbursement & Professional Development Apply today and be part of something impactful.

Job Description Position: Electrical Engineer III Location: Irvine, CA / Riverside, CA / San Diego, CA / Schaumburg, IL / Chicago, IL / Belleville, IL / St. Louis, MO / Albuquerque, NM / Avon, CO / Lakewood, CO / Dallas, TX / Overland Park, KS Years of Experience: 5+ Years About RTM: RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensive suite of national resources combined with localized relationships, delivering exceptional value to our clients. At RTM Engineering Consultants, we prioritize the well-being and growth of our team members. Our commitment to professional development is evident through hands-on mentoring, opportunities for advancement, and access to RTM University. With integrated multi-disciplinary studios, you'll collaborate with experts of all levels and various disciplines. We continuously foster a positive team culture through outings that strengthen the bonds of our teams and at RTM, giving and taking are fundamental values. We believe in giving our best, contributing to others, and embracing diversity and equality for progress. Join our dynamic and inclusive team where your well-being, growth, and contributions are valued. Our Team: At RTM, we hold a profound appreciation for our workforce. We firmly believe that YOU, our team members, are our most valuable asset and are instrumental in defining our organization. Our dedication lies in delivering experiences that foster your growth and success, whether you are just embarking on your career path or have attained seasoned expertise. Guided by our CORE values of Collaborative Communication, Overall Unity, Respect and Trust, and Excellence in Engineering, we forge a unified team that consistently pursues professional achievement in all endeavors we undertake. RTM is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental, and vision plans, employee assistance program, disability coverage, life insurance, 401(k) and profit sharing, flexible work schedule, paid time off and training and development courses. Benefits of Joining RTM: • Responsible Time Off (RTO) & Paid Holidays, • Flexible Scheduling, • 401K with Matching, • Health, Dental, Vision, & Life Insurance, • Hands-on Mentoring & Learning, • Professional Advancement Opportunities Applies electrical design knowledge, skill and ability to create construction drawings for the project owner and provides continuous professional support throughout the entire construction process. Serves as the primary liaison responsible for coordination and communication activities between the design team and the client/customer and provides project management oversight and professional support throughout the entire construction process. Key Responsibilities: • Provides complete management of project timelines and related design activity communication between the design team and the client/customer, accurately & timely, • In accordance with company standards, provides assistance in the preparation of accurate and complete proposals and engineering agreements, • Accurately and timely produces electrical design elements consistent with project specifications in accordance with the project hours, scope & parameters, • Produces electrical construction documents appropriate for permitting based on project specifics, • Provides research design options consistent with project requirements, • Produces accurate and complete engineering project specifications within project parameters, • Accurately and consistently execute QA/QC process, • Provide project coordination with in house and outside sources, • Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes and standards consistent with company quality standards, • Actively participates in post design consultation activities and represents the company in client meetings through construction completion, • Assists in the preparation of other documents germane to a project with enthusiasm and professionalism, • Responsible for on-boarding and overseeing junior engineers, • Actively mentors junior engineers and designers, • Provide timely billing of projects to accounting department, • Follows established work rules, policies and procedures, • Actively engages with other members of the company to continuously strive to improve processes, create efficiencies and reduce costs, • 4-year degree in Engineering required, • Minimum of 5 years’ experience, • Expert knowledge of building codes and standards, • Knowledge of engineering drafting standards, • Knowledge of electrical engineering standards and other trades, • Demonstrable understanding of construction process and interpretation of construction drawings., • Knowledge of AutoCad, • Knowledge of Revit Equal Employment Opportunity: It is the policy of RTM Engineering Consultants to practice a program of equal employment opportunity, and advancement opportunities are made available to all employees on the basis of individual qualifications without regard to race, religion, color, national origin, disability, age or gender. At this time, only candidates authorized to work in the United States of America without the need for sponsorship will be considered. RTM does not currently accept unsolicited resumes through or from search firms or recruiters.