Electrician jobs in New Jersey

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

The Department of Facilities and Administrative Services is a large operational service organization that provides a broad array of services to the campus community through the following areas: Access Control Services, Automotive Services, Building Services, Energy and Central Utilities, Facilities

Location: Swedesboro, NJ Summary Install, maintain, improve and repair equipment, plant services and building installations to set levels effectively in compliance with best practices ensuring production efficiency can be met within a safe well-presented facility. Respond to technical issues affecting production and maintain electrical and mechanical services through Preventive Maintenance. Responsibilities • Install, maintain, improve and repair equipment, plant services and building installations to set levels effectively in compliance with best practices ensuring production efficiency can be met within a safe well-presented facility., • Respond to technical issues affecting production and maintain electrical and mechanical services through application of advanced Total Productive Maintenance tools and techniques., • Plays a pivotal role in helping guide the Engineering and Maintenance teams through extensive training, mentoring and technical support to continuously improve and upgrade equipment and technician capabilities., • High level production breakdown support through root cause problem solving, with minimal downtime to production. Ability to take these incidents and develop long term technical solutions to eliminate recurrence of issue through machine upgrades., • Set up and operate production equipment in accordance with current good manufacturing practices. Develop and improve SOP’s to support production, sanitation and maintenance staff have detailed instructions and machine setting guidelines for optimal performance., • Calibrate or adjust equipment to ensure quality production using such tools as calipers, micrometers, height gauges, protractors, or ring gauges., • Document and use center-lining tools to standardize machine operations., • Assist in all aspects of manufacturing electrical and mechanical equipment with an emphasis on quality, organization and neatness using tools such as 5S and TPM techniques and approaches., • Work in coordination with the Maintenance Manager on major projects leading sub-project activities, • Prepare reports and recommendations on machines and repairs required for Maintenance Manager., • Train maintenance technicians how to estimate length of time required to complete a job and likely consequences of failure to complete work within required timescales., • Report breakdown root causes, equipment faults and concerns to management along with designed recommendations on how to resolve., • Develop preventive maintenance tasks and activities and work with PM coordinator to enter EAM and train technicians on how to follow and complete., • Plan and prioritize workload to support production and ensure efficient use of working time., • Ensure all lost time, minor and trivial accidents are reported., • Ensure all company procedures are understood and followed., • Ensure a safe working environment exists for self and colleagues, ensuring all health, safety environmental and quality management procedures are followed and achieve the company’s and department KPI targets., • Undertake special projects as required., • Actively utilize continuous improvement methodology to progress the maintenance function., • Assist visiting specialist when necessary., • Ensure that contractors are utilized in accordance with company procedures., • Follow up on any temporary repairs and generate a work order in the EAM (Enterprise Asset Management System), • Know where emergency STOP and START/STOP buttons are located, • Responsible for following all Lock Out/Tag Out procedures for machine when necessary, • Complete a Food Safety Incident Report if an incident occurs, • Complete an Incident Report if there are any injuries., • Participates and assists in any audits when requested, • Follow and enforce all company GMP procedures. Document any violations, • Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1., • Perform all special requests by the Maintenance Manager. The client offers a competitive salary package that is dependent on qualifications and experience, as well as a strong benefit package, plus participation in a company-wide bonus plan. For immediate consideration and faster response, please forward current resume to: . Please include job #19777 in subject line. Please note that all candidates applying must be a US Citizen or Permanent Resident. Client will NOT sponsor.

Title Electrical Controls Engineer/Industrial Electrician Report to Facility/Engineering Director. Job Summary Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. In addition, proven trouble shooting skills are necessary. Job Duties / Responsibilities • Design, fabricate, and install PLC based process control panels., • Troubleshoot and upgrade existing control panels., • Maintain inventory of all PLC/HMIrack systems and programs., • Work to install110V, 220V, and 480V 3 phase wiring., • Real electrical schematics and wiring diagrams., • Be able to troubleshoot 480V electrical control systems., • Specify wiring and motor controls for 480V systems., • Install power distribution and protection systems., • HMI Interfaces, • Temperature Controllers and Transmitters, • Pressure Transmitters, • 4-20ma Loop Controllers, • Burner Controllers and Actuators, • Industrial pH Meters, • Level Transmitters, • Flow Meters, • Variable Frequency Drives Work Conditions • Physically available to lift up to 50lb., • Exposure to hazardous conditions associated with the Company, • 24/7 availability may be required., • Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time, • Overtime as needed. Job Requirements • AS, BSEE, BSEET, or technical degree., • 3-5 years of industry experience., • Review projects including quotes, job specifications, and resolve any quote to job specifications differences., • System Architecture including non-standard material and control pane lpower requirements/distribution., • Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work., • Material responsibility includes advance material order, specifying Mod Box material, specifying Panel material, writing Mod Box EBMs and writing panel material EBMs., • Assisting with installation • Debugging with no additional support • Launchand Standby, • As Builts Technology Requirements • RSLogix 5, 5000, • RS Networx for DeviceNet, ControlNet, EtherNet IP, • DriveExecutive, DriveExplorer, • PanelBuilder PDS, 1400e, 32, • RSView Studio, • Trouble Shooting PID Loops, • Calibrating Process Control Equipment, • Microsoft Office Suite Benefits • Competitive Compensation • 401(k) • 401(k) Matching, • Medical, Dental,and Vision Benefits, • Paid Time Off and Paid Holiday’s Classification Full Time Position

Position Summary We are seeking a skilled Industrial Electrician responsible for the layout, installation, maintenance, and repair of electrical and telecommunications systems that support industrial equipment, facilities, and operations. This role ensures reliable power distribution, supports critical infrastructure, and maintains compliance with all applicable codes, regulations, and safety standards. Key Responsibilities • Perform layout, installation, maintenance, and repair of industrial electrical and telecommunications systems., • Provide power support for machinery, equipment, lighting, and facility infrastructure., • Maintain and troubleshoot electrical systems to ensure uninterrupted operation of essential equipment., • Install, commission, and support electrical systems while working alongside other electricians and trades., • Assist with high-voltage electrical and instrumentation circuits as required., • Interpret electrical drawings, specifications, and NEC code requirements., • Partner with team members to provide guidance, oversight, and technical support during installations and repairs., • Follow all safety standards, company procedures, and regulatory requirements., • Respond to emergency service calls and be available for on-call assignments as needed. Qualifications & Experience • Proven experience installing, maintaining, and repairing industrial electrical and telecommunications systems., • Strong working knowledge of electrical theory and NEC code requirements., • Ability to work independently and manage diverse electrical tasks across multiple environments., • Experience supporting high-voltage or instrumentation circuits preferred., • Valid New Jersey Driver’s License required., • Willingness to attend job-related training and continued education programs. Education Requirements • High School Diploma, Vocational School Diploma, or equivalent required., • Minimum of two years of formal electrical training, including NEC code review coursework.

Company Description Princeton Theological Seminary, established in 1812, is dedicated to forming Christian leaders to serve Christ's church, academia, and the world. Located in Princeton, NJ, the institution is renowned for its commitment to theological education and fostering a community of faith and learning. The Seminary combines academic excellence with a rich history, providing an environment for students to grow spiritually and intellectually. With a global perspective, it prepares faith-driven leaders for impactful service. Role Description This is a full-time, on-site Electrician role based in Princeton, NJ. The Electrician will perform installation, maintenance, and repair of electrical systems and equipment across campus facilities. Responsibilities include diagnosing and troubleshooting electrical issues, performing routine preventative maintenance, ensuring code compliance, and collaborating with the facilities team to uphold safety standards. The candidate will be required to handle various electrical tasks, ensuring operational efficiency for a safe environment. Qualifications • Proficiency in Electrical Work and Electricity, with the ability to install and maintain electrical systems, • Strong background in Maintenance & Repair tasks, ensuring equipment functionality and safety, • Skilled in Troubleshooting, identifying, and resolving electrical issues efficiently, • Understanding of Electrical Engineering principles and code compliance, • Excellent problem-solving and organizational skills, • Relevant certifications and licenses to perform professional electrical work, • Ability to work independently and collaboratively as part of a team, • Prior experience in facility management or academic settings is a plus

PrideNow is seeking an experienced Maintenance Electrician to join our team in a full-time, direct hire role. This position requires a highly skilled professional capable of performing complex industrial electrical maintenance in a manufacturing environment. Candidates with journeyman-level experience or 7–10 years of industrial electrical experience are strongly encouraged to apply. Shifts Available: • 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM, • Pay Rate: $34.25/hr. plus $1 shift differential for 2nd shift, • Comprehensive benefits package to include Medical, Vision, Dental, PTO, 401k + Match, FSA etc. Job Responsibilities: • Identify electrical hazards and safely isolate, ground, and prepare circuits and equipment for repair., • Use required PPE to protect against arc flash and electrical shock., • Read, interpret, and troubleshoot from blueprints and schematics, including 240V and 480V three-phase systems., • Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high-voltage switchgear, protective relays, and related equipment., • Install, calibrate, and maintain electrical apparatus using engineering drawings and manuals., • Install conduit, pull wiring, and perform proper terminations., • Use electrical and electronic testing equipment such as multimeters, ammeters, megohm meters, high-potential testers, oscilloscopes, and digital probes., • Install and maintain electrical distribution and control equipment including switches, relays, circuit breakers, and panels., • Install and maintain drive systems including VFDs, eddy current drives, and DC drive systems., • Perform installation, maintenance, and troubleshooting of PLC systems, including point-to-point wiring and equipment replacement., • Install and calibrate pressure, temperature, flow, and level control devices., • Observe operating systems to detect hazards and determine need for adjustments or modifications., • Design and lay out control panels, set up complex control systems, and modify engineering drawings when required., • Repair or replace faulty electrical equipment, including electronic controls, motors, meters, outlets, and panels., • Document work performed and communicate issues, irregularities, and ongoing needs to the team., • Maintain a safe and clean work environment following all procedures and regulations., • Communicate effectively to resolve electrical problems., • Assist in training line mechanics and apprentices as needed., • Use the computerized maintenance management system (CMMS) to enter and retrieve information., • Follow safe work practices at all times and ensure work does not endanger others., • Perform additional duties as needed. Additional Requirement: • Physical examination is required., • Must be able to train on 1st shift for 1-2 weeks if needed, • Journeyman or electrical license preferred or 5+ years of experience as an electrician in a manufacturing plant #SM

Job Description Maintenance Mechanic / Electrician Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Responsibilities Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking an Electrician A to join our Dover Alloy group in Dover, New Jersey. The work hours for this Weekend Days position are Friday Saturday Sunday 6Am-630PM Training 1st Shift (M-F 6:00A - 2:30P). Starting Hourly Rate: $36.75; Rate After 12 Months: $39.35 Position will receive an hourly "shift premium" while assigned to an off-shift. $5,000 Sign on Bonus payable after 90 days of employment (Sign on Bonus for external candidates only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. POSITION OVERVIEW This position provides electrical support to the plant and takes preventative measures to maintain functioning electrical systems. ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES \n • Expected to assist in the implementation of EHS Values and policy statements and accompanying principals.\n, • Comply with all department, facility, corporate and regulatory EHS regulations.\n, • Wear all required personal protective equipment (PPE).\n, • Report all job-related illness and injuries (Per Employee Handbook).\n, • Report all safety, health and environmental concerns to your supervisor in a timely manner.\n, • Maintain and install electrical systems and equipment as specified by supervision or Senior Electrician; such as motors, transformers, wiring, switches, heaters, alarm systems, etc.\n, • Inspect circuits and wiring for specified shielding and grounding and repair or rewire system according to building codes and safety regulations.\n, • Proficient in P.M. of all electrical equipment in the plant.\n, • Possess some knowledge of programmable controllers and associated equipment.\n, • Assist in the training of equal or less Senior Electricians.\n, • May be requested to perform minor Mechanical Maintenance functions when necessary.\n, • Must properly complete and abide to all safety procedures and training classes provided as standard to all Maintenance colleagues within the department\n, • Ability to read simple ladder logic.\n, • Ability to read a variety of blue prints.\n, • Ability to troubleshoot PLC inputs/outputs and Analog signals.\n, • Ability to setup VFDs and troubleshoot alarm codes.\n, • Familiar with HMI computers.\n, • Familiar in an industrial/manufacturing environment.\n, • Requires lifting/carrying of up to 50 lbs. on an occasional basis from waist to knuckle level.\n, • Requires lifting of up to 70 lbs. on an occasional basis from floor to waist height.\n, • Any weights over 70 lbs. require the use of assistive devices and/second person assist.\n, • Push/Pull forces of up to 200 lbs. involving tools, parts and other service requirements.\n, • This job requires the use of a face piece to face respirator and therefore, you must be clean shaven in the areas where the face piece meets the face.\n, • Simpson VOM \n, • Recording Ammeters \n, • Small Hand Tools\n, • Megger \n, • Conduit Bender \n, • Computer \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Qualifications BASIC QUALIFICATIONS \n • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.\n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.\n, • No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.\n, • High School Diploma or GED from an accredited institution.\n, • Assist in the layout and wiring of new installations.\n, • Maintain all assigned work areas in as clean, orderly, and safe condition as circumstances allow.\n, • Possess working knowledge of electrical code requirements.\n\n About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

At Trane TechnologiesTM and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. Summary Trane Technologies in Trenton, NJ is hiring for a 2nd Shift Maintenance Electrician! This role will perform complex maintenance work on our production floor and focus on repairing and troubleshooting electrical issues. 2nd Shift Hours (estimated): 2:00 - 10:30pm. Primary Responsibilities Performs any combination of (but not limited to) the following duties according to specific department guidelines: • Determine the existence of electrical hazards and problems. Safely isolate, ground, and prepare circuits and electrical apparatus to enable repairs., • Have knowledge of and use the required personal protective equipment to protect against arc flash and shock., • Experience in reading and troubleshooting from blueprints & schematics with system voltages 240 and 480 three-phase systems., • Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high voltage switchgear, protective relaying, and related equipment., • Read/interpret engineering drawings and manuals to install, calibrate and maintain electrical apparatus. Work from complex engineering and manufacturers drawings or manuals to complete projects and assigned work., • Install electrical conduit, pull and terminate wiring., • Ability to use electrical/electronic testing equipment to such as multi-meters, ammeters, megohm meters, high potential testers, oscilloscopes, digital probes to troubleshoot and repair equipment., • Use hand and power tools related to the electrical trades., • Install and maintain control and distribution apparatus, such as switches, relays, circuit breakers, and control panels., • Install and maintain drive systems such as variable frequency drives, eddy current, and DC drives., • Install and maintain (point to point wiring, equipment replacement) programmable logic control systems (PLC)., • Install and calibrate pressure, temperature, flow, and level controls., • Observe installed systems to detect hazards and determine the need for adjustments or modifications., • Design layout work on panels, set up complex control systems, interpret and alter engineering drawings and wiring diagrams if required., • Repair or replace faulty electrical equipment, including electronic controls, meters, outlets, panels and small mechanical devices such as motors., • Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Effectively communicate problems and solutions to resolve electrical problems., • Participate in the on-the-job training of line mechanics and apprentices as needed., • Use computerized maintenance system to retrieve and enter information., • Observe safe work practices and ensure work does not endanger others., • This role is considered safety sensitive. Qualifications • High School Diploma or GED, • 3-5 years of electrical industrial maintenance experience, • Journeyman's License or equivalent degree preferred, • Proficient reading and interpreting blueprints and schematics, • Experience troubleshooting PLC's, • Ability to work overtime as needed Base pay rate: $34.00-$36.00/hr. We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

At Trane TechnologiesTM and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. Summary Trane Technologies in Trenton, NJ is hiring for a 2nd Shift Maintenance Electrician! This role will perform complex maintenance work on our production floor and focus on repairing and troubleshooting electrical issues. 2nd Shift Hours (estimated): 2:00 - 10:30pm. Primary Responsibilities Performs any combination of (but not limited to) the following duties according to specific department guidelines: • Determine the existence of electrical hazards and problems. Safely isolate, ground, and prepare circuits and electrical apparatus to enable repairs., • Have knowledge of and use the required personal protective equipment to protect against arc flash and shock., • Experience in reading and troubleshooting from blueprints & schematics with system voltages 240 and 480 three-phase systems., • Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high voltage switchgear, protective relaying, and related equipment., • Read/interpret engineering drawings and manuals to install, calibrate and maintain electrical apparatus. Work from complex engineering and manufacturers drawings or manuals to complete projects and assigned work., • Install electrical conduit, pull and terminate wiring., • Ability to use electrical/electronic testing equipment to such as multi-meters, ammeters, megohm meters, high potential testers, oscilloscopes, digital probes to troubleshoot and repair equipment., • Use hand and power tools related to the electrical trades., • Install and maintain control and distribution apparatus, such as switches, relays, circuit breakers, and control panels., • Install and maintain drive systems such as variable frequency drives, eddy current, and DC drives., • Install and maintain (point to point wiring, equipment replacement) programmable logic control systems (PLC)., • Install and calibrate pressure, temperature, flow, and level controls., • Observe installed systems to detect hazards and determine the need for adjustments or modifications., • Design layout work on panels, set up complex control systems, interpret and alter engineering drawings and wiring diagrams if required., • Repair or replace faulty electrical equipment, including electronic controls, meters, outlets, panels and small mechanical devices such as motors., • Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Effectively communicate problems and solutions to resolve electrical problems., • Participate in the on-the-job training of line mechanics and apprentices as needed., • Use computerized maintenance system to retrieve and enter information., • Observe safe work practices and ensure work does not endanger others., • This role is considered safety sensitive. Qualifications • High School Diploma or GED, • 3-5 years of electrical industrial maintenance experience, • Journeyman's License or equivalent degree preferred, • Proficient reading and interpreting blueprints and schematics, • Experience troubleshooting PLC's, • Ability to work overtime as needed Base pay rate: $34.00-$36.00/hr. We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

At Trane TechnologiesTM and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. Summary Trane Technologies in Trenton, NJ is hiring for a 2nd Shift Maintenance Electrician! This role will perform complex maintenance work on our production floor and focus on repairing and troubleshooting electrical issues. 2nd Shift Hours (estimated): 2:00 - 10:30pm. Primary Responsibilities Performs any combination of (but not limited to) the following duties according to specific department guidelines: • Determine the existence of electrical hazards and problems. Safely isolate, ground, and prepare circuits and electrical apparatus to enable repairs., • Have knowledge of and use the required personal protective equipment to protect against arc flash and shock., • Experience in reading and troubleshooting from blueprints & schematics with system voltages 240 and 480 three-phase systems., • Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high voltage switchgear, protective relaying, and related equipment., • Read/interpret engineering drawings and manuals to install, calibrate and maintain electrical apparatus. Work from complex engineering and manufacturers drawings or manuals to complete projects and assigned work., • Install electrical conduit, pull and terminate wiring., • Ability to use electrical/electronic testing equipment to such as multi-meters, ammeters, megohm meters, high potential testers, oscilloscopes, digital probes to troubleshoot and repair equipment., • Use hand and power tools related to the electrical trades., • Install and maintain control and distribution apparatus, such as switches, relays, circuit breakers, and control panels., • Install and maintain drive systems such as variable frequency drives, eddy current, and DC drives., • Install and maintain (point to point wiring, equipment replacement) programmable logic control systems (PLC)., • Install and calibrate pressure, temperature, flow, and level controls., • Observe installed systems to detect hazards and determine the need for adjustments or modifications., • Design layout work on panels, set up complex control systems, interpret and alter engineering drawings and wiring diagrams if required., • Repair or replace faulty electrical equipment, including electronic controls, meters, outlets, panels and small mechanical devices such as motors., • Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Effectively communicate problems and solutions to resolve electrical problems., • Participate in the on-the-job training of line mechanics and apprentices as needed., • Use computerized maintenance system to retrieve and enter information., • Observe safe work practices and ensure work does not endanger others., • This role is considered safety sensitive. Qualifications • High School Diploma or GED, • 3-5 years of electrical industrial maintenance experience, • Journeyman's License or equivalent degree preferred, • Proficient reading and interpreting blueprints and schematics, • Experience troubleshooting PLC's, • Ability to work overtime as needed Base pay rate: $34.00-$36.00/hr. We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Responsibilities Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking an Electrician A to join our Dover Casting group in Dover, New Jersey. The work hours for this Afternoon position are Monday - Friday (2:30p - 11:00p). Training 1st Shift (M-F 6:30A - 3:00P). Starting Hourly Rate: $36.75; Rate After 12 Months: $39.35 Position will receive an hourly "shift premium" while assigned to an off-shift. $5,000 Sign on Bonus payable after 90 days of employment (Sign on Bonus for external candidates only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. POSITION OVERVIEW This position provides electrical support to the plant and takes preventative measures to maintain functioning electrical systems. ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES • Expected to assist in the implementation of EHS Values and policy statements and accompanying principals., • Comply with all department, facility, corporate and regulatory EHS regulations., • Wear all required personal protective equipment (PPE)., • Report all job-related illness and injuries (Per Employee Handbook)., • Report all safety, health and environmental concerns to your supervisor in a timely manner., • Maintain and install electrical systems and equipment as specified by supervision or Senior Electrician; such as motors, transformers, wiring, switches, heaters, alarm systems, etc., • Inspect circuits and wiring for specified shielding and grounding and repair or rewire system according to building codes and safety regulations., • Proficient in P.M. of all electrical equipment in the plant., • Possess some knowledge of programmable controllers and associated equipment., • Assist in the training of equal or less Senior Electricians., • May be requested to perform minor Mechanical Maintenance functions when necessary., • Must properly complete and abide to all safety procedures and training classes provided as standard to all Maintenance colleagues within the department, • Ability to read simple ladder logic., • Ability to read a variety of blue prints., • Ability to troubleshoot PLC inputs/outputs and Analog signals., • Ability to setup VFDs and troubleshoot alarm codes., • Familiar with HMI computers., • Familiar in an industrial/manufacturing environment., • Requires lifting/carrying of up to 50 lbs. on an occasional basis from waist to knuckle level., • Requires lifting of up to 70 lbs. on an occasional basis from floor to waist height., • Any weights over 70 lbs. require the use of assistive devices and/second person assist., • Push/Pull forces of up to 200 lbs. involving tools, parts and other service requirements., • This job requires the use of a face piece to face respirator and therefore, you must be clean shaven in the areas where the face piece meets the face., • Simpson VOM, • Recording Ammeters, • Small Hand Tools, • Megger, • Conduit Bender, • Computer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Qualifications BASIC QUALIFICATIONS • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered., • High School Diploma or GED from an accredited institution., • Assist in the layout and wiring of new installations., • Maintain all assigned work areas in as clean, orderly, and safe condition as circumstances allow., • Possess working knowledge of electrical code requirements.\n\n About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Responsibilities Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking an Electrician A to join our Dover Alloy group in Dover, New Jersey. The work hours for this Midnight position are Sunday Night to Thursday Night 10PM-630AM Training 1st Shift (M-F 6:00A - 2:30P). Starting Hourly Rate: $36.75; Rate After 12 Months: $39.35 Position will receive an hourly "shift premium" while assigned to an off-shift. $5,000 Sign on Bonus payable after 90 days of employment (Sign on Bonus for external candidates only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. POSITION OVERVIEW This position provides electrical support to the plant and takes preventative measures to maintain functioning electrical systems. ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES • Expected to assist in the implementation of EHS Values and policy statements and accompanying principals., • Comply with all department, facility, corporate and regulatory EHS regulations., • Wear all required personal protective equipment (PPE)., • Report all job-related illness and injuries (Per Employee Handbook)., • Report all safety, health and environmental concerns to your supervisor in a timely manner., • Maintain and install electrical systems and equipment as specified by supervision or Senior Electrician; such as motors, transformers, wiring, switches, heaters, alarm systems, etc., • Inspect circuits and wiring for specified shielding and grounding and repair or rewire system according to building codes and safety regulations., • Proficient in P.M. of all electrical equipment in the plant., • Possess some knowledge of programmable controllers and associated equipment., • Assist in the training of equal or less Senior Electricians., • May be requested to perform minor Mechanical Maintenance functions when necessary., • Must properly complete and abide to all safety procedures and training classes provided as standard to all Maintenance colleagues within the department, • Ability to read simple ladder logic., • Ability to read a variety of blue prints., • Ability to troubleshoot PLC inputs/outputs and Analog signals., • Ability to setup VFDs and troubleshoot alarm codes., • Familiar with HMI computers., • Familiar in an industrial/manufacturing environment., • Requires lifting/carrying of up to 50 lbs. on an occasional basis from waist to knuckle level., • Requires lifting of up to 70 lbs. on an occasional basis from floor to waist height., • Any weights over 70 lbs. require the use of assistive devices and/second person assist., • Push/Pull forces of up to 200 lbs. involving tools, parts and other service requirements., • This job requires the use of a face piece to face respirator and therefore, you must be clean shaven in the areas where the face piece meets the face., • Simpson VOM, • Recording Ammeters, • Small Hand Tools, • Megger, • Conduit Bender, • Computer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Qualifications BASIC QUALIFICATIONS • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered., • High School Diploma or GED from an accredited institution., • Assist in the layout and wiring of new installations., • Maintain all assigned work areas in as clean, orderly, and safe condition as circumstances allow., • Possess working knowledge of electrical code requirements.\n\n About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Responsibilities Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking an Electrician A to join our Dover Alloy group in Dover, New Jersey. The work hours for this Weekend Days position are Friday Saturday Sunday 6Am-630PM Training 1st Shift (M-F 6:00A - 2:30P). Starting Hourly Rate: $36.75; Rate After 12 Months: $39.35 Position will receive an hourly "shift premium" while assigned to an off-shift. $5,000 Sign on Bonus payable after 90 days of employment (Sign on Bonus for external candidates only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. POSITION OVERVIEW This position provides electrical support to the plant and takes preventative measures to maintain functioning electrical systems. ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES \n • Expected to assist in the implementation of EHS Values and policy statements and accompanying principals.\n, • Comply with all department, facility, corporate and regulatory EHS regulations.\n, • Wear all required personal protective equipment (PPE).\n, • Report all job-related illness and injuries (Per Employee Handbook).\n, • Report all safety, health and environmental concerns to your supervisor in a timely manner.\n, • Maintain and install electrical systems and equipment as specified by supervision or Senior Electrician; such as motors, transformers, wiring, switches, heaters, alarm systems, etc.\n, • Inspect circuits and wiring for specified shielding and grounding and repair or rewire system according to building codes and safety regulations.\n, • Proficient in P.M. of all electrical equipment in the plant.\n, • Possess some knowledge of programmable controllers and associated equipment.\n, • Assist in the training of equal or less Senior Electricians.\n, • May be requested to perform minor Mechanical Maintenance functions when necessary.\n, • Must properly complete and abide to all safety procedures and training classes provided as standard to all Maintenance colleagues within the department\n, • Ability to read simple ladder logic.\n, • Ability to read a variety of blue prints.\n, • Ability to troubleshoot PLC inputs/outputs and Analog signals.\n, • Ability to setup VFDs and troubleshoot alarm codes.\n, • Familiar with HMI computers.\n, • Familiar in an industrial/manufacturing environment.\n, • Requires lifting/carrying of up to 50 lbs. on an occasional basis from waist to knuckle level.\n, • Requires lifting of up to 70 lbs. on an occasional basis from floor to waist height.\n, • Any weights over 70 lbs. require the use of assistive devices and/second person assist.\n, • Push/Pull forces of up to 200 lbs. involving tools, parts and other service requirements.\n, • This job requires the use of a face piece to face respirator and therefore, you must be clean shaven in the areas where the face piece meets the face.\n, • Simpson VOM \n, • Recording Ammeters \n, • Small Hand Tools\n, • Megger \n, • Conduit Bender \n, • Computer \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Qualifications BASIC QUALIFICATIONS \n • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.\n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.\n, • No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.\n, • High School Diploma or GED from an accredited institution.\n, • Assist in the layout and wiring of new installations.\n, • Maintain all assigned work areas in as clean, orderly, and safe condition as circumstances allow.\n, • Possess working knowledge of electrical code requirements.\n\n About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Responsibilities Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking an Electrician A to join our Dover Alloy group in Dover, New Jersey. The work hours for this Weekend Days position are Friday Saturday Sunday 6Am-630PM Training 1st Shift (M-F 6:00A - 2:30P). Starting Hourly Rate: $36.75; Rate After 12 Months: $39.35 Position will receive an hourly "shift premium" while assigned to an off-shift. $5,000 Sign on Bonus payable after 90 days of employment (Sign on Bonus for external candidates only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. POSITION OVERVIEW This position provides electrical support to the plant and takes preventative measures to maintain functioning electrical systems. ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES \n • Expected to assist in the implementation of EHS Values and policy statements and accompanying principals.\n, • Comply with all department, facility, corporate and regulatory EHS regulations.\n, • Wear all required personal protective equipment (PPE).\n, • Report all job-related illness and injuries (Per Employee Handbook).\n, • Report all safety, health and environmental concerns to your supervisor in a timely manner.\n, • Maintain and install electrical systems and equipment as specified by supervision or Senior Electrician; such as motors, transformers, wiring, switches, heaters, alarm systems, etc.\n, • Inspect circuits and wiring for specified shielding and grounding and repair or rewire system according to building codes and safety regulations.\n, • Proficient in P.M. of all electrical equipment in the plant.\n, • Possess some knowledge of programmable controllers and associated equipment.\n, • Assist in the training of equal or less Senior Electricians.\n, • May be requested to perform minor Mechanical Maintenance functions when necessary.\n, • Must properly complete and abide to all safety procedures and training classes provided as standard to all Maintenance colleagues within the department\n, • Ability to read simple ladder logic.\n, • Ability to read a variety of blue prints.\n, • Ability to troubleshoot PLC inputs/outputs and Analog signals.\n, • Ability to setup VFDs and troubleshoot alarm codes.\n, • Familiar with HMI computers.\n, • Familiar in an industrial/manufacturing environment.\n, • Requires lifting/carrying of up to 50 lbs. on an occasional basis from waist to knuckle level.\n, • Requires lifting of up to 70 lbs. on an occasional basis from floor to waist height.\n, • Any weights over 70 lbs. require the use of assistive devices and/second person assist.\n, • Push/Pull forces of up to 200 lbs. involving tools, parts and other service requirements.\n, • This job requires the use of a face piece to face respirator and therefore, you must be clean shaven in the areas where the face piece meets the face.\n, • Simpson VOM \n, • Recording Ammeters \n, • Small Hand Tools\n, • Megger \n, • Conduit Bender \n, • Computer \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Qualifications BASIC QUALIFICATIONS \n • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.\n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.\n, • No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.\n, • High School Diploma or GED from an accredited institution.\n, • Assist in the layout and wiring of new installations.\n, • Maintain all assigned work areas in as clean, orderly, and safe condition as circumstances allow.\n, • Possess working knowledge of electrical code requirements.\n\n About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

CONSIDERED EXPERIENCE INCLUDES: Regional Field Service Mechatronics Electrician Automation Mechanic Tech Electronics Technician Engineering tech Installation Maintenance Repair Configure Sofware Program Machine Machinery FactoryTalk PanelBuilderControl Panels Sesors PLCs HMI Motor Drives Actuator Mo

Electrician Instructor Opportunity.Join Lincoln Tech in Moorestown, NJ as we seek Electricians to be Instructors for our Electrical and Electronic Systems program! If you're passionate about educating and inspiring the next generation of professionals, we want to hear from you.Whether or not you hav

Our client, a leading organization in the industrial sector, is seeking an Electrician to join their team.As an Electrician, you will be part of the Maintenance Department supporting the Facilities Team.The ideal candidate will demonstrate strong problem-solving skills, attention to detail, and the

Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.

Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis. Position requires electricians hand tools.

Complete and abide by all safety procedures and training classes provided as standard to all Maintenance colleagues within the department.

Performing maintenance and repairs on electrical systems.

Esposito Construction is seeking a skilled and experienced electrician to work with a crew in performing electrical work for commercial and residential site utility projects. Esposito Construction is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender I

We are seeking a skilled and motivated Industrial Electrician to support our plant operations.

We are seeking a skilled and dependable Journeyman Electrician to support electrical installations, repairs, and maintenance work across residential, commercial, and industrial projects in New Jersey.

Oversee electricians and apprentices, assign tasks, monitor productivity, and enforce safety protocols. Valid driver's license; Journeyman or Master Electrician license preferred.

Shift Manufacturing Electrician. Gpac is working with a leading building material manufacturer that is urgently seeking a 3rd Shift Manufacturing Electrician (10:30pm to 6:30am) for their facility south of the Elizabeth area of New Jersey. The electrician is responsible for troubleshooting and repai

The Electrician is responsible for performing skilled electrical work in the installation, maintenance, repair, and troubleshooting of electrical systems, equipment, and fixtures in a commercial environment, in accordance with applicable codes and safety standards. With over two decades of experienc

Join a Global Leader in Workforce Solutions Net2Source Inc.Recognized for 300% growth in the past three years, we operate in 34 countries with a global team of 5,500+.Our mission? To bridge the talent gap with precision.

Momentum Solar is a premier residential solar provider with offices throughout the U.Founded in 2009, Momentum has grown exponentially over the past decade.We implement the entire solar process to ensure a seamless transition to renewable energy.Pay rate: $35+/hr depending on experience.Installs, re

For 60 years Englert has been the gold standard and a leading manufacturer of metal roofing and gutter systems.We are built on a simple core principle, dedicating ourselves to help our customers succeed.At Englert, we are more than just top-quality metal roofing and gutters.We are industry pioneers,

Install, maintain, improve and repair equipment, plant services and building installations to set levels effectively in compliance with best practices ensuring production efficiency can be met within a safe well-presented facility.Respond to technical issues affecting production and maintain electri

Experience with robotic controllers, pneumatic and hydraulic modules, electromechanical sensing, automated systems, PLCs, and industrial controllers.

G1 Facility Services is a leading facility maintenance and construction provider, proudly serving customers nationally.We support varied industries, including Aviation, Food Services, and Hospitality.With over two decades of experience in the maintenance and construction industries, we are seeking t

Residential Electrical Technician.Fante's Home Services is a leading provider of home service solutions for residential customers.With a commitment to excellence and customer satisfaction, we pride ourselves on delivering top-notch service to our clients.We are currently expanding our team and seeki

Review historical maintenance records to create proactive inspection, testing, and preventive maintenance schedules. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. Oversee electrical and lighting systems' general operation, repair, and maint

Perform preventive maintenance on electrical systems according to scheduled maintenance programs. Document all maintenance activities, repairs, and equipment modifications. Collaborate with the maintenance team, engineers, and production staff to resolve technical issues.

Electrician - Service Technician (Residential). Electrical Service Technician to join our growing team in Cranford, NJ. In this role, you'll work alongside experienced, certified technicians to deliver high-quality electrical repairs, maintenance, and installations for our residential customers.

Perform installation, maintenance, and repair of electrical systems, apparatus, and components of industrial machinery and equipment according to electrical code, manuals, schematic diagrams, and blueprints.Install new equipment, maintain and repair existing electrical systems.Pull electrical wiring

The Electrician is responsible for preventative maintenance, layout, installation, and repair of all electrical equipment and power and lighting systems in the facility including motors, generators, transformer controls and mechanisms, timing devices, switches, cable and conduits.This includes conne

Residential Service Electrician. If you're an Electrician with a proven sales record, this could be THE opportunity for you!.

Johns Manville is currently hiring Industrial Plant Electrician at our Penbryn, NJ plant. The Industrial Electrician works under the general supervision of the shift supervisor, performing all electrical maintenance on equipment to maximize productivity while maintaining safety and quality standards

Work involves traveling to various commercial project sites across New Jersey.

Industrial Electrician 2nd Shift. We are looking for a Industrial Electrician for 2nd shift Sun-Thu, 2:00 PM-10:30 PM interested in a career with a top ranked and growing snack company, to join our Maintenance team at PIM's Somerset site in New Jersey.