Installation jobs in Jacksonville, Florida - Page 5Create job alerts

Miller Electric is seeking an Entry level Electrical Construction Wireman with 0 - 4 years of hands-on experience in the electrical trade. Assist journeyman electricians required for the repair, maintenance, installation, and modernization of electrical systems for buildings, equipment and grounds.

The Journeyman Electrician is a licensed electrical professional responsible for performing skilled work related to the installation, maintenance, repair, and modernization of electrical systems in commercial and industrial environments. Journeyman Electricians also play a key role in mentoring and

Installation, troubleshooting & repair of electrical systems and circuits in retail, commercial, & industrial settings to meet National Electrical Code (NEC) standards. A valid electrical license issued by your state of residence is required and must be maintained in good standing throughout employm

The Electrical Service Apprentice / Helper will assist Service Technicians on various electrical projects assigned by Supervisor or Service Coordinator. Assist with the installation of various electrical systems, both indoor and outdoor. Previous electrical experience is preferred but not required.

The Electrical Foreman will coordinate and work with the team of electricians responsible for installation, wiring and testing of electrical components of chilled water systems. Drive production velocity -- coordinate daily electrical team assignments and workflow to maximize throughput while mainta

Our client in Jacksonville, FL on Blount Island, is seeking an Auto Accessory Installer to join their team. The ideal candidate will have a valid TWIC card,prior automotive accessory installation experience and prior use of hand/power tools which will align successfully in the organization. Job Title: Automotive Accessory Installer Location: Jacksonville, FL Blount Island Pay Range: $20/hr What’s the Job? • Perform quality installations of automotive accessories on OEM manufacturer vehicles., • Ability to install accessories including roof rack systems, trailer hitches, wireless charge pads, front and rear park assists, interior illumination kits, exterior body kits, illuminated scuff plates, frameless mirror links, upgraded fog light systems, body decals, rear bumper guards, spoilers and any new accessories put into production., • Meet the time requirements of each accessory installation per OEM manufacturer guidelines., • Ability to drive cars, trucks, forklifts and moving equipment., • Valid TWIC card and Driver's license, • Manual dexterity sufficient to reach and handle items., • Experience with power/hand tools, • Keen attention to details, • Full-time hours, • Benefits, • Tuition reimbursement, • Potential for Overtime, • Daily/weekly incentive bonuses About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Work requires knowledge of contracts negotiated with providers for facility maintenance services for the school district for such items as custodial services, solid waste management, landscape maintenance, elevator maintenance, retention pond maintenance, and the installation and maintenance of misc

Performs general repairs for roofing projects when necessary. Prior experience in the installation of shingles roofing systems and flashing.

You will install, repair, modify, troubleshoot, load and test new and existing electrical line, circuits, systems, fixtures and controls located in and near installation building and structures.You will plan and determine the routing, placement, type, size, gauge, balance, load, continuity and safe

Maintenance Millwright Apprentice (1st Shift). The Millwright Apprentice is responsible for assisting in the installation, maintenance, and repair of machinery and heavy equipment in an industrial environment. The apprentice will receive structured, on-the-job training under the guidance of experien

Job DescriptionBenefits: • Flexible schedule, • Competitive pay, depending on your skills and availability, • Professional office support regarding scheduling, customer support and job tracking, • Free access to custom mobile application for scheduling and communications, • Successful marketing campaign that brings us well qualified customers, • Branded apparel and signage Handyman Connection needs a Handyman in Jacksonville Beach, Florida. That special craftsman or craftswoman will ideally have a variety of home improvement skills to support the growth of our growing business in. If you have a great attitude and willingness to help others, this opportunity may be the perfect fit for you! Make a difference in others lives. Become a Handyman today. Job Summary: • Provide basic construction skills for residents and businesses in Jacksonville Beach and the surrounding area., • Bid work and produce it with great satisfaction., • Effectively communicate with clients and suppliers.Job Requirements, • Skill areas in at least four (4) of the following:, • General Carpentry - Rough and Finish, • Bathroom Upgrades / Remodel, • Kitchen Refresh / Remodel, • Painting Interior and Exterior, • Drywall Repair / Patching / Caulking, • Minor Plumbing and Minor Electrical Knowledge, • Flooring Repair and Installation, • Handyman, General Home Repairs and Maintenance Work, • Great customer service and client relations, • Knowledge of building codes, • Material management, • Must have current driver's license and insurance, • Must have tools, work vehicle and good references, • Must have experience in the remodeling or home repair trades, • Independent contractors must carry liability insurance and workers comp, • Must have a smartphone and access to the InternetHandyman Connection is strongly considering candidates with experience as a Handyman for Residential and Light Commercial or similar positions. Join Handyman Connection in Jacksonville Beach today apply now.

Job DescriptionDescription: We are seeking a Fire Sprinkler Construction Sales Representative, who will cultivate relationships, identify new opportunities, and provide tailored solutions for fire sprinkler systems. With a focus on delivering excellence and exceeding client expectations, this role is perfect for a self-starter who thrives on creating value and driving results. In this role, the Fire Sprinkler Construction Sales Representative will manage the entire sales cycle, from prospecting and lead generation to contract negotiation and project handover. They will work closely with our Management, Engineering and Operations Teams to ensure that client expectations are met and exceeded. Additionally, the Fire Sprinkler Construction Sales Representative will be responsible for maintaining strong relationships with existing clients, identifying opportunities for upselling and cross-selling, and ensuring long-term customer satisfaction. Requirements: What We Offer: • Paid time off (PTO) and holidays., • Comprehensive benefits package including medical, dental, and vision insurance., • Short term and long-term disability., • 401(k) matching., • Employer funded life insurance., • Opportunities for professional development and growth. At DynaFire, we are your comprehensive partner for all fire and life safety needs. From expert support and installation to state-of-the-art sprinkler and fire alarm systems, we deliver tailored solutions to protect your business and assets. Whether you're looking to enhance security or ensure regulatory compliance, reach out to DynaFire today for industry-leading solutions and exceptional service. DynaFire is an equal employment opportunity employer dedicated to promoting an inclusive, diverse, and innovative environment for our employees. We provide all qualified applicants with employment consideration without regard to race, color, religion, sex, pregnancy, childbirth, ancestry, national origin, age, protected veteran status, marital status, genetic information, gender identity or expression, sexual orientation, disability, or any other protected status in accordance with applicable federal, state, or local laws.

Job DescriptionPosition Description: Fast growing, industry leading commercial Cooking-Refrigeration-HVAC equipment installation, maintenance and repair Day & Nite AmeriServe has immediate need for a chain restaurant account specialist, a newly created unique role designed to create even greater value for the dynamic chain restaurant vertical. Based in either Florida, Georgia or North Carolina the specialist can expect to travel approximately 40% of the time meeting with customers and company peers.This is a hybrid-remote position. Candidate must live in one of the following states: Florida, Georgia or North Carolina. Primary Responsibilities and Measures: working cross-functionally with customers and peers, a successful chain restaurant specialist will create and deliver aligned strategic plans, supported by underlying performance metrics and measures. Through high degrees of proactive engagement, a chain restaurant specialist will anticipate rather than react to ongoing rates of sector change delivering timely and meaningful solutions rather than solving problems. Through these efforts the successful chain restaurant specialist will minimally achieve 20% organic growth from the portfolio while simultaneously reducing all stakeholder expenses no less than 7%.. Qualifications: viable chain restaurant specialist candidates must have proven record of retail success and demonstrable feel for the market’s business characteristics. Equally, a viable chain restaurant specialist will have prior business-to-business, preferably field-based many-to-many experience. Associates degree or above preferred, but not mandatory. Compensation: in addition to participating in company benefits and quarterly performance bonus programs, chain restaurant specialist is a salaried position. Salary commensurate on experience, up to $75,000 annualized. Day & Nite AmeriServe is an Equal Opportunity Employer. $60,000.00 - $75,000.00 Annually

Job Description Join a team that treats you like family! We value and invest in our employees, and are currently looking to fill several positions in our husband & wife run Jacksonville, FL based business. Seeking both experienced and inexperienced data cable infrastructure cabling technicians. Construction background is helpful. Experience is NOT necessary, we will train! Experienced Technician Qualifications: • Min 2 yrs. data cabling experience, • Min 1 yr experience leading & managing crew of 4 or more technicians, • Strong problem solving skills, • Ability to read floor plans, equipment layouts, control diagrams, line diagrams, & other architectural, mechanical, & electrical plans, • Professionalism in high paced stressful situations, • Exceptional organization & prioritization skills, • Strong knowledge of industry standards, • Experience with utilization of both fiber & copper testing equipment, • Experienced in fiber fusing, copper termination, & complete data cabinet buildout, • Clear and professional communication skills with management, co-workers, & customers, • OSHA 30 certificate, • MEWP certificate, • Valid driver's license with a clean driving record, • Reliable transportation with required insurance coverage, • Must be able to pass all criminal background checks & drug tests, • Applicants must be authorized to work for any US employer & a legal US citizen, • Willing to work on-call, day, night, or weekend shifts as the jobs require, • Ability to work mandatory overtime to meet business needs if required, • Able to be out of town for up to 2 weeks at a time, • Typical work week could be approximately 50-60 hrs a week depending on job site requirements & deadlines, • A preference for operating in a fast-paced, technical environment with a high degree of critical thinking & problem solving, • Maintain required certificates an&/or licenses, • Ability to consistently carry/move/transport 50+ pounds, • Work from elevated heights of 6-45ft, • Motivated to work both individually & as a team quickly to complete tasks, • Competitive pay, • Paid time off (after 1st year), • Health insurance (medical, dental, & vision), • Paid travel time, • No- Low out of town(travel) expenses, • W-2 (not a 1099), • Direct deposits, • Tools and PPE providedCompany DescriptionWe are a husband & wife team owned company providing reliable data cable infrastructure installation. We value hard work, integrity, and helping our employees grow their skills and career.We are a husband & wife team owned company providing reliable data cable infrastructure installation. We value hard work, integrity, and helping our employees grow their skills and career.

Job Description GENERAL DESCRIPTION The candidate must be able to set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components DUTIES • The candidate shall set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills, • Must be able set up and operate 2,3,4, and 5 axis machining centers and CNC grinders, • Must be familiar with the use of a variety of machine tool attachments or related equipment to perform precision machine work, • Maintain accuracy in accordance with requirements of blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives, • Produce assigned work in accordance with established standards, • Perform all work in compliance with all safety rules and regulations in the production shop environment, • High School Diploma or equivalent, • At least two (2) years of documented experience in Aerospace and/or machinist trade, • Prefer experience from military fixed wing community (F/A-18, P-8, F-5, T-6,T-44,H-60) or civilian heavy structure background, • At least two (2) years CNC aviation experience, • Military installation DEPOT level and/or major MRO facility maintenance experience preferred., • Up to 25% travel may be required, • Must be a US Citizen, • Must be able to pass a National Agency background check, which could include a criminal history and credit check for access to Government facilities., • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands., • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 50 pounds., • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color and judge three-dimensional depth. TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

Job DescriptionDescription: About us Sack is redefining the industry, experiencing explosive growth year after year with no signs of stopping! As the fastest-growing MEPF, millwright, and rigging company in the South, we’re building the future with innovation. We offer competitive pay, great benefits, and the perfect place to launch and grow your career. Job Responsibilities We are seeking an Electrical Project Manager to join our construction firm. As part of our team, you oversee multiple crews and implement the installation of large-scale electrical systems. You manage work sequencing, interpret blueprints and schematics, and ensure safe and timely completion of all projects. This role requires strong leadership and organizational skills, and our ideal candidate possesses significant prior experience organizing and administering multiple crews on large work sites. You should have ample experience with installation and construction processes, as well as experience with blueprint reading, electrical schematics, wiring, conduit work, and thorough knowledge of workplace safety practices. Specific Duties • Oversee multiple crews on a major multimillion-dollar project, • Manage material procurement and requisition needs, • Establish workflows and sequences to ensure projects remain on track, • Master Electrician certification preferred, • Five or more year’s experience supervising construction multimillion-dollar projects, • Strong leadership skills and a demonstrated history of successful leadership, • Strong attention to detail and deadlines Benefits: • Truck & Gas Card, • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Life insurance ($20,000 after 6 months), • Paid time off, • Parental leave, • Referral program, • Relocation assistance, • Vision insurance

Job Description GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES • Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools, • Analyze and evaluate structural damage to metal system and items, • Develop patterns using a combination of parallel and radial line development, • Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc., • Replace sections and patch old systems, • Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and circumference, • Use a variety of assembly joints, complex fastening systems, riveted or welded joints, • Drill or punch holes, • Assemble or repair items by seaming, soldering, bolting, screwing, riveting, tacking and spot welding, • User precision measuring instruments such as calipers, protractors, snap ring, height, depth, dial and screw pitch gauges, squares, rulers, trammel points and sine bars, • High School Diploma or equivalent, • A&P license not required but a plus, • Prefer experience from military fixed wing and/or rotor community, including, but not limited to: F/A-18, P-8, F-5, T-6,T-44,H-60 variants or civilian heavy structures sheet metal/fastener R&R background., • Five (5) years relevant experience in heavy structures or military aviation background, • Military installation DEPOT level maintenance experience and/or equivalent major MRO facility preferred., • Must be able to read and interpret blueprints, • Must be familiar with U.S. Military aviation maintenance criteria and specifications, • Must be able to manufacture, fabricate, develop, install and repair a variety of items from a variety of metals including high strength steel, titanium, aluminum and numerous alloys, fiberglass and honeycomb/composite skins., • Up to 25% travel may be required, • Must be a US Citizen, • Must be able to pass a National Agency background check, which could include a criminal history and credit check for access to Government facilities., • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands., • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 50 pounds., • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color and judge three-dimensional depth. TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

Job Description Heavy Equipment Operator Position Type: Full-time, Non-Exempt, Hourly Reports to: Logistics Superintendent/Materials Manager Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective In this role, you will operate a variety of heavy equipment to support material movement and structural assembly within our production facility. You will play a key part in keeping projects on schedule while ensuring safety and efficiency. Your responsibilities will include identifying and reporting any mechanical or safety issues, following all company safety protocols and OSHA regulations, and assisting with general labor tasks when not operating machinery. You’ll also help maintain production schedules and support the team in meeting project goals. . Essential Functions • Operating a variety of heavy equipment, including:, • Class 7 & Class 5 Forklifts, • 36K Fork Truck, • Carry Deck Crane, • Gantry Crane, • Combi Lift, • Reach Lift, • Straddle Carrier, • Tugger, • Walk-behind Motorized lift, • Additional equipment as needed, • Safely transport, load, and unload construction materials across the job site., • Assist with structural assembly, installation, and movement of components using appropriate lifting equipment., • Maintain daily equipment logs and perform pre-operation inspections and safety walk-arounds., • Ensure proper care, routine cleaning, and basic maintenance of assigned equipment., • Identify and report mechanical issues or potential safety hazards immediately., • Always comply with company safety policies and OSHA regulations., • Perform ground labor tasks as needed when not operating equipment., • Follow production schedules and execute tasks efficiently to meet deadlines., • May be required to work in various weather conditions and challenging terrain., • Perform additional duties and tasks as directed by supervisors., • Prepares for ISO 9001 and other audits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervisory Responsibility This position does not have supervisory responsibilities. Work Location This position operates out of manufacturing facility in Jacksonville, FL. Work Environment While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Occasional evening and weekend work may be required as job duties demand. Travel None. Required Education and Experience. • 3+ Years’ experience that includes 2 consecutive related experience or training, • Ability to perform accurate measurements and calculations., • Excellent problem-solving skills and attention to detail., • High School Diploma or GED Preferred Education and Experience • Formal documentation by certificate or card of previous training and experience, • 5+ Years’ related experience or training, • Reading and Interpreting Technical Documents, • Some vocational technical training Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Div. 187 Jacksonville, FL Summary Responsible for the inspection, testing, maintenance, troubleshooting, and repair of fire alarm and life safety systems. This role ensures systems operate properly and comply with applicable codes, standards, and safety regulations. The technician works independently in the field, providing high-quality service while maintaining strong customer relationships. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform inspections, testing, maintenance, and repairs on fire alarm and life safety systems in accordance with NFPA standards and applicable local codes., • Diagnose system issues, identify malfunctions, and complete timely and accurate repairs., • Follow all safety policies, procedures, and job site regulations., • Stay current with industry codes, technologies, and certification requirements. High school diploma or equivalent required; technical training or certifications preferred; minimum of 1–3 years of experience servicing fire alarm or life safety systems preferred; NICET certification in Fire Alarm Systems preferred or required based on state; strong working knowledge of NFPA 72, NEC, and local fire codes. Computer Skills Microsoft Office applications; proficiency with fire alarm panels, devices, and testing equipment; ability to use mobile service software, smartphones, and basic computer applications; familiarity with system manufacturers such as Notifier or equivalent preferred. Physical Demands Frequent standing, walking, climbing ladders, and working in confined spaces; ability to work at heights and in occupied buildings; ability to lift and carry up to 50 lbs.; field-based role at commercial, industrial, and multi-family properties; exposure to varying weather conditions, noise, and electrical environments; On-call rotation and occasional overtime may be required. Agency Submissions: Century Fire Protection does not accept unsolicited resumes from external Headhunters, staffing agencies or search firms. Any resume submitted without a signed agreement will be considered property of the company, and no fees will be paid. Company DescriptionCentury Fire Protection is one of the largest and most successful full-service fire protection companies based in the Southeast and we are still growing! There are a wide range of positions and countless opportunities for career growth. Each employee is empowered to do their job and serve our clients. There is no better place to work in the industry! We are experts in design, fabrication, installation, and maintenance of all types of fire protection systems in virtually all commercial markets for each stage of a buildings life cycle. Headquartered in Duluth, GA, Century Fire has more than 20 offices across seven states including Alabama, Florida, Georgia, Kansas, North Carolina, South Carolina, Tennessee, Texas, and Virginia. Benefits We believe our people are our biggest asset and as such, we offer comprehensive benefits, education, and training to ensure employees succeed and grow. Benefits include: Medical Dental Vision Flexible Spending Accounts Voluntary Life Insurance Short-term & Long-term Disability Paid Time Off Paid Holidays 401(K) with Company Match Employee Assistance Program Employee Relief Fund Supplemental Insurance including Critical Illness, Hospitalization & Accident Century Fire Protection is a GREAT place to work! Come and GROW WITH US!Century Fire Protection is one of the largest and most successful full-service fire protection companies based in the Southeast and we are still growing! There are a wide range of positions and countless opportunities for career growth. Each employee is empowered to do their job and serve our clients. There is no better place to work in the industry!\r\n\r\nWe are experts in design, fabrication, installation, and maintenance of all types of fire protection systems in virtually all commercial markets for each stage of a buildings life cycle. Headquartered in Duluth, GA, Century Fire has more than 20 offices across seven states including Alabama, Florida, Georgia, Kansas, North Carolina, South Carolina, Tennessee, Texas, and Virginia.\r\n\r\n\r\n\r\nBenefits\r\n\r\nWe believe our people are our biggest asset and as such, we offer comprehensive benefits, education, and training to ensure employees succeed and grow. Benefits include:\r\n\r\nMedical\r\nDental\r\nVision\r\nFlexible Spending Accounts\r\nVoluntary Life Insurance\r\nShort-term & Long-term Disability\r\nPaid Time Off\r\nPaid Holidays\r\n401(K) with Company Match\r\nEmployee Assistance Program\r\nEmployee Relief Fund\r\nSupplemental Insurance including Critical Illness, Hospitalization & Accident\r\n\r\n\r\nCentury Fire Protection is a GREAT place to work! Come and GROW WITH US!

Job DescriptionJob Summary The Subject Matter Expert (SME)—Technician/Operator I for training devices designs, develops, reviews, and tests training solutions and conducts technician or operator training for defined areas of military expertise in accordance with contractual specifications, standards, and instructions. Essential Job Functions • Serves as a SME for the development and delivery of training solutions pertaining to technicians, maintainers, or operators of military platforms, systems, or weapons., • Works with a team of engineering professionals to analyze, design, develop, and deliver desktop software, virtual/augmented reality simulators, and training devices., • Works with a team of production and manufacturing technicians to provide technical guidance during all phases of development and implementation., • Participates in training conferences, In-Process Reviews (IPRs), and other required meetings., • Travels in support of data capture, device testing, and delivery., • Troubleshooting systems and/or components., • Determining suitable replacements of OEM components with Commercial off-the-Shelf (COTS) components., • Determining functional and physical fidelity of COTS, simulated components, and software., • Advising if components are properly installed, and wires are accurately routed and secured., • Informing functionality of components, subsystems, and systems through interpretation and communication of theory of operation and practical application., • Identifying spares for logistical support of training devices., • Identifying tools, test sets, and support equipment to meet training requirements of the device., • Supporting Hardware and Software Integration (HSI)., • Assists the production team as necessary to meet schedule dates., • Develops training curriculum and courseware or other instructional products and presents them to the customer., • Performs Contractor Preliminary Inspections (CPI)., • Accompanies training device deliveries to ensure proper handling and care during loading, unloading, and transport., • Provides analysis of transportation options based on contract requirements., • Oversees and aids in assembly of training devices to ensure proper care and installation of components., • Performs Contractor Final Inspection (CFI) after reassembly at the customer's site., • Complies with ITAR restrictions and Controlled Unclassified Information (CUI) security requirements., • Safely handles government-furnished equipment and materials., • Works a standard schedule with overtime as required., • Performs other duties as assigned.Supervisory Responsibilities, • NoneJob RequirementsKnowledge, Skills, and Abilities, • Ability to work effectively in a team environment., • Strong verbal and written communication skills., • Ability to interact professionally with military, government, and foreign personnel., • Ability to read and interpret technical manuals and engineering drawings., • Proficiency with Microsoft Office tools., • Strong interpersonal skills and ability to communicate technical concepts clearly., • Ability to analyze and interpret instructions and standards., • Ability to obtain a security clearance when required.Education and Experience, • High school diploma or GED equivalent required., • Four (4) years of experience related to V-22 avionics systems maintenance or operation., • Additional qualifications or experience may be required per project scope., • Military Instructor Training Program completion preferred but not required., • Familiarity with V-22 Interactive Electronic Technical Manual (IETM) preferred., • CDI/CDQAR qualifications preferred., • Experience in training or curriculum development is desirable.

Job Description Responsibilities The Experienced Diesel Technician is responsible for providing service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction. Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED), • 9 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility. This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description RQ Construction, LLC is actively hiring an experienced Construction Superintendent to support our Field Operations team on projects located at Kings Bay Naval Base in Georgia and nearby areas. This role is based on an active military installation and requires full-time, on-site leadership. Candidates who are already local to the region are preferred, though relocation may be an option. The Superintendent is responsible for directing all on-site construction activities for assigned projects. This includes supervising field staff and subcontractors, coordinating daily and long-term schedules, and ensuring all work is executed safely, efficiently, and in compliance with contract requirements, including drawings, specifications, and project proposals. This role plays a critical part in maintaining quality standards, adhering to project timelines, and managing costs, while upholding RQ's Mission, Vision, and Values. Since its founding in 1996, RQ has expanded from a regional leader in Southern California to a nationwide organization managing projects approaching $1B in value. As an integrated design and construction firm, we provide services including construction, architectural design, trade services, virtual design and construction, and sustainable/LEED project management for projects ranging from $25M to over $250M. Our portfolio spans the U.S. and international locations such as Naval Station Guantanamo Bay and Puerto Rico. Our continued success is driven by a commitment to Quality, Integrity, and Leadership. We foster a team-oriented environment where innovation is encouraged, and employees are supported in delivering exceptional results. In return, we offer a strong compensation package, excellent benefits, and a positive, collaborative workplace Compensation $110,000 - $150,000 annually Benefits Medical, dental, and vision insurance; 401(k) with company match; vehicle allowance; gas card Qualifications • High school diploma or GED required, • Additional education in construction management, engineering, or a related field is preferred, • At least 5 years of experience serving as a Superintendent on mid-sized construction projects, • Minimum of 4 years of hands-on construction or trade experience required, • Proven experience managing project scheduling, procurement, field operations, safety, quality control, and overall production across all project phases, • Experience with government, military, or large commercial construction projects is highly preferred, particularly in design-build or large-scale environments, • Proficiency in Microsoft Office, Outlook, and general computer applications required, • Familiarity with Primavera P3/P6, Viewpoint, BIM, or Revit is preferred, • CPR, First Aid, OSHA 30, EM-385, and STS certifications required (training available if needed), • Bilingual English/Spanish skills are an advantage We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job DescriptionDescription: Join Our Team as an Outside Sales Representative – Unleash Your High Earning Potential! Southeastern Enclosures formally Southeastern Aluminum Products Are you a driven and ambitious sales professional eager to maximize your earning potential? We are a leading manufacturer in the Single Family, Multifamily, and Hospitality sectors, seeking a talented Outside Sales Representative to engage with new and existing customers in the construction supply industry. In this role you will be calling on wholesalers, installers, and contractors, not homeowners. With facilities in Florida (headquarters) and Indiana, we serve the United States. Help us build the Treasure Coast Florida market and achieve exceptional financial rewards! Position Description: The representative will expand our presence by contacting existing and prospective clients in east and central Florida. Candidates must reside in the Treasure Coast area. Job Responsibilities and Duties: • Be knowledgeable about the product, • Present, promote, and sell products/services to existing and prospective customers, • Identify prospective customers and convert them into new accounts, • Grow the existing customer base profitably, • Focus sales efforts by studying existing and potential sales volume of dealers, • Adjust sales presentations to suit each situation, • Conduct product knowledge sessions promoting features and benefits of products and installation, • Maintain customer contact lists and notes using CRM, • Submit orders using internal systems, • Resolve customer issues by investigating and addressing them, • Keep management informed by submitting activity and results-oriented reports, such as daily call reports, updated 90 Day Plans, and monthly and annual territory analyses, • Provide historical data by maintaining records on territory and customer sales, • Monitor competition by gathering current marketplace information on products, new products, delivery schedules, merchandising techniques, etc., • Recommend changes in products, services, and policies by evaluating the competitive landscape, • Maintain professional and technical knowledge by being active on job sites and customer visits, • Collaborate with colleagues across various areas of our business, • Competitive base pay based on experience, • Car allowance, • High earning potential with lucrative commission structures, • Comprehensive benefits package including health, dental, and vision insurance, • (401K) with company match, • Paid time off and holidays, • Opportunities for career growth and advancement, • Supportive and collaborative work environment, • Ambitious, • Problem Solver, • Resilient, • Driven, • Competitive, • Self-Motivated, • Critical Thinker, • Collaborative, • Territory is Eastern and Central Florida Markets, • Occasional overnight travel required, • Minimum of 2 years’ sales experience, preferably in manufacturing, • Knowledge of products in the residential building industry, • Proven customer service and strong organizational skills, • Excellent communication skills

Job Description The Superintendent is responsible for overseeing the installation, maintenance, and repair of systems in various settings, ensuring compliance with safety standards and regulations. This role involves managing field crews, coordinating with project managers, and ensuring the timely completion of projects. The Superintendent must be adept at troubleshooting complex electrical issues and providing technical guidance to the team. Directs activities of workers concerns with construction of buildings, or other construction projects by performing duties personally or through subordinate supervisors. Manages subordinate supervisors who supervise a total of 20 or more employees in the construction site workers subcontractors. Duties/Responsibilities: • Oversee the installation, maintenance, and repair of systems in various settings, • Ensure compliance with safety standards and regulations, • Manage field crews and coordinate with project managers, • Ensure the timely completion of projects, • Troubleshoot complex issues, • Provide technical guidance to the team, • Orders procurement of tools and materials to be delivered at specified times to conform to work schedules., • Other duties as assignedRequired Skills/Abilities:, • Excellent leadership and team management skills, • Strong problem-solving and decision-making abilities, • Proficient in reading and interpreting blueprints, schematics, and technical drawings, • Familiarity with relevant electrical codes and safety regulations, • Ability to manage project timelines and resources effectively, • Strong communication and interpersonal skills, • Ability to work in various environmental conditions, • Prepares or reviews reports on progress, materials used and costs and adjusts work schedules as indicated by reports.Education/Experience:, • Minimum of 5 years of experience in field services or a similar role, • Proven track record of managing and supervising teams effectively, • In-depth knowledge of maintenance protocols, and safety standards, • Experience in project management and implementation of systems, • Strong problem-solving skills and ability to make critical decisions under pressureTravel Requirements:, • Flexibility to travel on short notice for urgent business needs, to attend meetings, trainings, and events., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to sit, stand, and walk for long periods of time., • Ability to use a computer, phone, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use, • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Electrical Detailer Position Type: Full-time, Exempt, Salary Reports to: Electrical Engineering Manager Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective The Electrical Detailer plays a pivotal role in the meticulous design process, focusing on creating detailed shop drawings for electricians to facilitate the precise installation of electrical components, including, but not limited to; electrical equipment, cable, cable tray, conduit, receptacles, lights, switches, etc. This position involves close collaboration with Electrical Designers and Electrical Engineers to ensure seamless integration of designs and adherence to project specifications at the Manufacturing Facility. Essential Functions • Collaborate closely with Electrical Designers to receive detailed project design instructions and direction., • Coordinate with other discipline designers to integrate designs and avoid interferences in the shop., • Develop comprehensive shop drawings depicting electrical systems installation, scaled plan sheets, installation details, conduit runs, wiring details, and 3D models., • Review system specifications, verify design dimensions in the field, and generate bills of materials., • Execute tasks in strict accordance with company procedures, specifications, standards, and project-specific requirements., • Participate actively in project teams and contribute to the development of modular plants., • Prepare design drawing packages to facilitate seamless procurement, fabrication, installation, and construction processes., • Maintain effective communication with designers, drafters, and production personnel across various design disciplines. Competencies • Technical proficiency in electrical design and detailing, • Strong problem-solving and analytical skills, • Excellent written and verbal communication skills Supervisory Responsibility This position does not have supervisory responsibilities. Work Location This position will work out of our Main Office in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment Most Work is performed at a manufacturing facility, regular use of Personal Protective Equipment, such as safety glasses, steel toe boots, and mandatory head protection is necessary. Often trips to headquarters may be necessary for coordination and collaboration. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5:00 p.m. Occasional overtime effort may be requested to meet project specific deadlines. Travel Anticipated 10% travel for this position with some overnight stays. Some occasional local day travel may also be necessary. Required Education and Experience. • Strong understanding of electrical systems and components used in industrial settings., • Knowledge of CAD software (AutoCAD or Plant 3D) and Microsoft Office Suite., • Excellent attention to detail and problem-solving skills., • Ability to work collaboratively in a team environment., • Strong communication skills, both written and verbal. Preferred Education and Experience • Associate's degree in Electrical Engineering Technology or a related field, or equivalent experience. Additional Eligibility Qualifications None. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: Join Our Team as an Outside Sales Representative – Unleash Your High Earning Potential! Southeastern Enclosures formally Southeastern Aluminum Products Are you a driven and ambitious sales professional eager to maximize your earning potential? We are a leading manufacturer in the Single Family, Multifamily, and Hospitality sectors, seeking talented a Outside Sales Representative to engage with new and existing customers in the construction supply industry. With facilities in Florida (headquarters) and Indiana, we serve the United States. Help us build the central Florida market and achieve exceptional financial rewards! Position Description: The representative will expand our presence by contacting existing and prospective clients in central Florida. Candidates must reside in Central Florida. Job Responsibilities and Duties: • Be knowledgeable about the product, • Present, promote, and sell products/services to existing and prospective customers, • Identify prospective customers and convert them into new accounts, • Grow the existing customer base profitably, • Focus sales efforts by studying existing and potential sales volume of dealers, • Adjust sales presentations to suit each situation, • Conduct product knowledge sessions promoting features and benefits of products and installation, • Maintain customer contact lists and notes using CRM, • Submit orders using internal systems, • Resolve customer issues by investigating and addressing them, • Keep management informed by submitting activity and results-oriented reports, such as daily call reports, updated 90 Day Plans, and monthly and annual territory analyses, • Provide historical data by maintaining records on territory and customer sales, • Monitor competition by gathering current marketplace information on products, new products, delivery schedules, merchandising techniques, etc., • Recommend changes in products, services, and policies by evaluating the competitive landscape, • Maintain professional and technical knowledge by being active on job sites and customer visits, • Collaborate with colleagues across various areas of our business, • Competitive base pay based on experience, • Car allowance, • High earning potential with lucrative commission structures, • Comprehensive benefits package including health, dental, and vision insurance, • (401K) with company match, • Paid time off and holidays, • Opportunities for career growth and advancement, • Supportive and collaborative work environment, • Ambitious, • Problem Solver, • Resilient, • Driven, • Competitive, • Self-Motivated, • Critical Thinker, • Collaborative, • Territory is Orlando/Tampa/West Palm Beach Markets, • Occasional overnight travel required, • Minimum of 2 years’ sales experience, preferably in manufacturing, • Knowledge of products in the residential building industry, • Proven customer service and strong organizational skills, • Excellent communication skills

Job DescriptionFASTSIGNS #170901 is hiring for a full-time Fabrication Specialist to join our team! A Successful FASTSIGNS Fabrication Specialist Will Understand: Understanding measurements and manufacturing processes. Working with rigid materials to create custom signage. Cutting, Routing, Paint Prep, Sanding, Metal Work, Welding, Paint Mixing. Operate and maintain equipment such as C.N.C Router, Grinders, Welders, Shear, etc. Follow a layout to place dimensional or full-color graphic image(s) on a predetermined substrate or medium Prepare substrates for vinyl application to include sanding, cutting, painting, laminating, cleaning, etc. Fabrication of metal and other rigid substrates to complete sign builds. (Aluminum, Steel). Perform quality assurance measures pre- and post-production by accurately reading and interpreting a Work Order and then proofing for errors or unacceptable standards. Maintaining a safe work environment when working with tools, drills, and cutters. Perform finishing operations such as pre-package after paint has cured and prepare for installation. Report inventory levels and stock to be reordered to the center manager/production manager or franchisee. Clean and maintain storage areas Ideal Qualifications for FASTSIGNS Fabrication Specialist: • 1-2 years of experience in sign fabrication preferred, • High school diploma or equivalent, • Ability to stand for long periods of time (6 hours or more), • Ability to lift 50 or more pounds, • Flexibility to lean over a waist-high table and use back and forth hand motion to apply vinyl letters and graphics to a substrate, • Ability to work under pressure to output high volume, high-quality work, • Ability to use light power equipment Do you enjoy working with people? Do you enjoy helping people solve problems by offering advice and consultation? Are you looking for a job that offers constant learning, skills growth and a career path? If so, we are looking for employees just like you in the ever-changing Sign Industry. Apply today!

Job Description About Company: Security Center USA is accomplished in developing and deploying video management, intrusion, access control, gated entry, fleet management and A/V solutions for several markets including residential, commercial, industrial and government/municipality. We have been servicing the Southeast since 1999 and currently maintain the highest Better Business Bureau rating, A+. The organization is run on three basic principles: HONESTY, INTEGRITY and RESPECT! What really sets Security Center USA apart is our continual pursuit for excellence and a drive for 100% customer satisfaction. By using this theory Security Center USA has emerged to be one of the Southeast’s premier security systems integrator serving all of Florida, Georgia & South Carolina. About the Role: The Access Control Installation & Service Technician plays a critical role in ensuring the security and safety of various facilities by installing, maintaining, and repairing access control systems. This position requires a thorough understanding of electronic security hardware, software integration, and network connectivity to deliver reliable and efficient access solutions. The technician will work closely with clients to assess their security needs, provide expert recommendations, and implement customized access control systems. Additionally, the role involves troubleshooting and resolving technical issues promptly to minimize downtime and maintain system integrity. Ultimately, the technician contributes to creating secure environments by ensuring that access control systems operate flawlessly and meet all regulatory and client standards. Minimum Qualifications: • High school diploma or equivalent., • Proven experience in installing and servicing electronic access control systems or related security technology., • Basic understanding of electrical wiring, circuitry, and network protocols., • Ability to read and interpret technical manuals, blueprints, and wiring diagrams., • Technical certification in electronic security systems, such as NICET or equivalent., • Experience with IP-based access control systems and integration with video surveillance., • Familiarity with common access control software platforms and database management., • Knowledge of cybersecurity principles related to physical security systems., • Install, configure, and test access control hardware and software components including card readers, biometric scanners, and control panels., • Perform routine maintenance and emergency repairs on existing access control systems to ensure optimal functionality., • Diagnose and troubleshoot system malfunctions, network connectivity issues, and hardware failures., • Collaborate with clients to understand their security requirements and provide tailored solutions and technical support., • Document all installation and service activities accurately, including system configurations, maintenance logs, and service reports., • Stay updated on the latest access control technologies, industry standards, and best practices to recommend system upgrades. The technician uses their technical skills daily to install and configure complex access control systems, ensuring all components communicate effectively over networks. Troubleshooting skills are essential for diagnosing hardware and software issues quickly to minimize client disruption. Strong communication skills enable the technician to explain technical information clearly to clients and collaborate with team members. Attention to detail is critical when reading wiring diagrams and documenting system configurations to maintain accuracy and compliance. Additionally, staying current with emerging technologies allows the technician to recommend and implement innovative security solutions that enhance system performance and client satisfaction. Work Schedule: Monday-Friday with occasional weekends. Afterhours on call rotation and emergency dispatch needs. Hours vary based on client/company needs but generally have an 8AM start time to 5-6PM stopping time. Travel Requirements: Weekly travel throughout FL, GA or SC is common. All drive/travel time is performed in company issued vehicles, compensated at full pay rate, covered with company expense accounts and per diem issued. Other Requirements: The individual will be required to furnish their own hand tools, such as, but not limited to, screw drivers, scissors, wrenches, wire strippers/cutters, crimpers, sockets/ratchets, all formed of pliers/cutters, voltage meter, and any other hand tool needed to accomplish an install or service call. The individual must have no felony or criminal record, pass drug screening and have a valid driver’s license with a clean driving record. Compensation: The role has a window or compensation that will range based on experience. skill set and certifications held. Rates are negotiable and based on those stated factors but generally range from $22.00/hr - $42.00/hr. These rates do not include per diem while traveling, commissions, etc. Rates/Offers will be discussed and agreed to at time of hire. We offer a full suite of benefits including, but not limited to, medical, dental, vision, life, 401k, etc.

Job Description A Process Electrical Designer will create equipment and electrical layouts, develop drawing packages, and collaborate internally with the project team (project managers, project engineers, engineers) and externally with original equipment manufacturers (OEM) and clients. You will be responsible for analyzing sketches / drawings, identifying areas for improvement, and implementing innovative solutions that align with the project objectives. The Process Electrical Designer will work in both office and field environments. This role will require working in various industrial settings, including construction sites, manufacturing plants, and other operational facilities. Duties/Responsibilities: • Utilize 3D Scanner to scan existing equipment., • Assist in creating preliminary process equipment / general arrangement layouts in 2D AutoCAD., • Develop project models in 3D utilizing Revit and other 3D support software to include importing OEM models, creating families, routing of utility piping, conduit, cable tray, supports for equipment and piping., • Assist engineers with P&ID or process flow diagram (PFD) drawings as needed., • Assist electrical engineer in the development of single line and wiring diagrams as needed, • Develop panel and cable schedules, • Assist in developing installation drawings & packages utilizing 3D model., • Review of OEM 2D drawings & 3D model submittals for conformance to layout, validate clearances and access requirements, conforms to applicable specifications, and coordinate changes with OEM’s and Client., • Coordinate with project team during design and construction phases., • Travel as required to Owner facilities to learn and gather information about existing processes, equipment, and utilities., • Travel as required to job sites to support installation by collaborating with Stellar site staff, OEM’s, and installation subcontractors., • Updating drawings with record data., • Follow all drawing and modeling standards., • Participating in internal improvement efforts., • Other duties as assigned. Required Skills/Abilities:, • Proficiency with process design software, AutoCAD 2D, Revit or other 3D software., • Exposer and / or skilled in relevant software; Microsoft Office Software, Procore, Bluebeam, Adobe, Power BI and BIM / ACC., • Knowledge of National Electrical Code (NEC) standards., • Familiarity with ISA 5.1, • Ability to ensure compliance with regulatory requirements., • Ability to collaborate with cross-functional teams., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Familiarity with industry regulations, and standards including safety., • Flexibility to work in different environments and adapt to changing project requirements. Education/Experience:, • Minimum of an Associates 2-year degree in drafting, 3D modeling, or related field technical experience in construction trade., • Minimum of 1 – 5 years of experience in electrical design or a similar role. Relevant professional certifications are a plus., • Experience with Eplan or Plant 3D is a plus, • Experience in relevant industry (e.g., food or beverage manufacturing, industrial manufacturing, etc.)., • Experience in sanitary design for the Food & Beverage industry is a plus., • Experience in Electrical & Controls design, Equipment design, and Equipment Layouts are preferred. Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 25%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Position Summary: This position is responsible for operating multiple Veolia contracted client water and wastewater facilities. The primary purpose of this position is to cover vacations & absences at existing facilities, assist in the training and development of local operations teams, and to serve in a support role at new account start-ups. This position will be responsible for assisting with the overall operation and maintenance of accounts in their area. This includes process changes to meet compliance, troubleshooting processes & equipment, maintenance (routine, reactive, and preventive), process & compliance sampling, laboratory testing, and writing and distributing a daily shift report. In between time at designated accounts, this position will be responsible for the development of training resources for general water and wastewater industry knowledge, as well as site specific treatment training for all technicians in their region. This position requires significant travel, sometimes for extended periods of time - This can range from 1-2 weeks away from home at a time, all the way up to a month for extenuating circumstances. Essential Operational Duties and Responsibilities • Maintain complete operational coverage of the Veolia operated facilities in your designated region as vacations and unplanned absences arise. Coverage will be required on both day shifts and night shifts as absences arise, requiring significant schedule flexibility., • Assist in the operational development of all local technicians within your designated region. This includes in-person hands on training visits to multiple sites, assisting in the development of electronic training materials & resources, and directing training efforts of individual technicians. Additional training time will also be required with all new technicians as they are hired., • Ensure that industry standards and best practices are in use at all Veolia operated facilities in your designated region. This includes but is not limited to: recordkeeping methods, lab testing procedures, operational practices, preventative maintenance practices, etc.., • Support new account start-up projects as they arise. This will involve working closely with the Senior Wastewater Operational Technician (SWOT) team to develop operational tasks, procedures, and goals, in addition to training newly hired technicians., • Provide knowledgeable support to local technicians within your designated region to assist in troubleshooting process issues as they arise. Ensure that proactive decisions are being made by local technicians on a regular basis., • Operate and control electric motors, pumps, and valves to regulate flow of water into the Wastewater treatment plant., • Collect and test Wastewater samples to determine concentration levels and impurities at the designated testing frequency., • Responsible for accurate record keeping of client data such as residual content of chemicals, water turbidity, and water pressure., • Comply with all Veolia and multiple's safety parameters/programs., • Analyze lab data to uncover potential treatment issues and then implement process changes to prevent non-compliance., • May be responsible for compiling data for the Environmental Protection Agency or state regulatory body., • Coordinate with other operators throughout the multiple's facility in order to maintain the plants Wastewater treatment equipment., • Coordinate with multiple to schedule third-party maintenance support for all maintenance projects that are outside of Veolia's scope of work., • Complete all preventative maintenance defined by Veolia and multiple management at the designated frequency. Completion of all preventive maintenance must be documented accordingly. PM tasks include, but are not limited to; changing filters, changing oil, greasing bearings, documenting operating temperatures, exercising valves, etc..., • Complete, or assist in the completion of, all minor maintenance projects that may arise to ensure the Wastewater treatment facility remains operating effectively and efficiently. These maintenance items include, but are not limited to: chemical pump repair & replacement, small PVC piping installation, valve replacement, AOD pump repairs, check-valve cleanouts and repairs, etc..., • Willingness and availability to work with fellow operators on off-shifts when problems arise or if the operator needs assistance, • 24/7 availability to the Wastewater operators and multiple management., • Communicate frequently with the Veolia Account Manager regarding the operation of the Wastewater plant regarding the current status of the operation, including compliance, treatment issues, maintenance, and personnel issues., • Provide supervision and leadership to the other team members by exemplifying hard work, attention to detail, fair treatment of each member of the team and taking responsibility for results., • Provide direction to the team on the daily operation and maintenance of the Wastewater plant to ensure compliance. This includes but is not limited to: process changes, chemical feed rates, maintenance activities, and additional sampling to evaluate treatment and compliance., • Provide training and/or facilitate training of operators for all facets of the operation / management of the multiple Wastewater facility, • Provide clear verbal and written instructions to the team on the proper operation and maintenance of the Wastewater treatment plant and the equipment. This includes being responsible for creating and maintaining facility specific SOPs., • Problems encountered by this job are usually well outlined by a standard set of instructions describing the procedures for handling specific problems. Requires the ability to develop creative and/or innovative ideas related to improvements to processes related to their own job or department., • Independent scheduling of work load., • Management of inventories including lab supplies, consumable items, and equipment parts. No responsibility for handling or administering a budget., • The ability to develop creative and innovative ideas to improve the processes related to the operation / management of the WWTP, • Assignments are received in the form of results expected, due dates, and general procedures to follow., • Make process changes based on lab data and general process knowledge to correct compliance issues or improve the treatment process., • Duties are varied in nature, requiring independent action and judgment involving commonly encountered problems. Unusual cases or questionable matters are referred to the supervisor., • Issues and concerns of a significant matter should be discussed with the account manager to ensure actions taken are reasonable and in compliance with the contract., • Evaluate the skills and abilities of the other operators in order to properly assign/delegate tasks such as lab analyses, maintenance, preventive maintenance, manage chemical inventories, and manage waste disposal., • Evaluate maintenance projects and determine what outside support is needed and then coordinate and schedule with client maintenance teams or contractors., • Communication & Teamwork Expectations, • Participation in team meetings and discussions is required. Collaboration with team members on a regular basis is expected., • All team members are responsible for covering each others absences to the best of their ability, to ensure that the contracted coverage of the facility is never broken., • Continuous communication with client and Veolia management is expected., • Communicate with Veolia management frequently on the training progress of technicians, and the overall status of site operations Qualifications General Education And Experience Requirements • High school diploma or equivalent required., • Proficiency with Microsoft Office or Google equivalent required., • Strong mechanical aptitude preferred., • Strong communication skills, both verbally and written, required., • Willingness to learn and be able take instructions on Wastewater treatment processes, • Operational experience of site specific equipment preferred, including:, • 3+ years of experience in Wastewater treatment plant operations or related field required. Ability and desire to build and maintain a "team mentality", • Prior experience in a traveling work role preferred Working Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical working conditions for this position include a wastewater treatment plant and the outdoors. The job holder could be exposed to extreme weather conditions (extreme heat and cold), burns, chemicals, dangerous systems, dirt and dust, electrical hazardous, grease and oil, loud noises, vibrations, steam and high levels of moisture, and other hazardous conditions. This position requires the job holder to lift and/or carry up to 75 pounds, climb a vertical ladder up to 30 feet, stand for long period of time, walk on uneven surfaces, regular bending, climb onto and exit a forklift in a safe manner, use of extension ladders on a daily basis, ability to climb into and maneuver body in tight spaces. This position requires the job holder to be able to work both day and night shifts as needed. This position requires the job holder to be able to work 12 hour shifts if needed. This position requires the job holder to be available for emergency call-ins or phone support. Additional Information All your information will be kept confidential according to EEO guidelines. At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: ● Medical, Dental, & Vision Insurance Starting Day 1! ● Life Insurance ● Paid Time Off ● Paid Holidays ● Parental Leave ● 401(k) Plan - 3% default contribution plus matching! ● Flexible Spending & Health Saving Accounts ● AD&D Insurance ● Disability Insurance ● Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description 1st Class Pipefitter Position Type: Full-time, Non-Exempt, Hourly Reports to: Superintendent Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective To have experienced working knowledge of mechanical equipment and piping installation and the various terminologies, blueprint reading, measurements, setting equipment/piping, job specifications, etc., to build an integrally complete piping system. Essential Functions • Installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators, etc. to make a complete piping system., • Installation knowledge of all forms of piping system hangers, supports, braces, etc., from temporarily through jam nut completion., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Documentation of all quality reporting methods employed by SEA Quality Standards, • Operate overhead cranes and forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct, monitor, and assist team or less experienced pipefitters when needed., • Comply with all company policies, procedures, and safety requirements and physically / medically qualified to wear required PPE per OSHA standards., • Be fluent in all hydro process for 150psi testing and inspections., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Competency • Blueprint and Schematic Reading, • Strong Mechanical aptitude and problem-solving skills, • Pipe Layout and Fabrication, • Pipe Joining Methods, • Material Knowledge, • Testing and Inspection, • Problem-solving and Attention to Detail, • Good Spatial Awareness and Physical Stamina, • Communication, Teamwork, Time Management, and Adaptability Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 a.m. to 2:30 p.m. Second shift is Monday through Friday, 3:00 p.m. to 1:30 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception of local travel during the business day. Required Education and Experience • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, and gas arc cutting, • Fluent in all hydro process for 150 PSI testing and inspections, • Minimum of 6 years’ experience in Pipefitting, • Knowledge of datum lining, piping center lines and work points, • Strong attention to detail, basic math and tape measuring skills, • Physical stamina and the ability to work in various conditions (e.g. confined areas and heights) and physically/medically qualified to wear all required PPE, • High School Diploma or GED Preferred Education and Experience • 8 years of experience in Industrial Mechanical Fitting, • Accredited vocational technical training Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description A Process Designer will create equipment and piping layouts, develop drawing packages, and collaborate internally with the project team (project managers, project engineers, engineers) and externally with original equipment manufacturers (OEM) and clients. You will be responsible for analyzing sketches / drawings, identifying areas for improvement, and implementing innovative solutions that align with the project objectives. The Process Designer will work in both office and field environments. This role will require working in various industrial settings, including construction sites, manufacturing plants, and other operational facilities. Duties/Responsibilities: • Utilize 3D Scanner to scan existing equipment., • Assist in creating preliminary process equipment / general arrangement layouts in 2D AutoCAD., • Develop project models in 3D utilizing Revit and other 3D support software to include importing OEM models, creating families, routing of utility piping, product piping, conduit, cable tray, supports for equipment and piping., • Assist engineers with P&ID or process flow diagram (PFD) drawings as needed., • Assist in developing process installation drawings & packages utilizing 3D model., • Review of OEM 2D drawings & 3D model submittals for conformance to layout, validate clearances and access requirements, conforms to applicable specifications, and coordinate changes with OEM’s and Client., • Coordinate with project team during design and construction phases., • Travel as required to Owner facilities to learn and gather information about existing processes, equipment, and utilities., • Travel as required to job sites to support installation by collaborating with Stellar site staff, OEM’s, and installation subcontractors., • Updating drawings with record data., • Follow all drawing and modeling standards., • Participating in internal process improvement efforts., • Other duties as assigned.Required Skills/Abilities:, • Proficiency with process design software, AutoCAD 2D, Revit or other 3D software., • Exposer and / or skilled in relevant software; Microsoft Office Software, Procore, Bluebeam, Adobe, Power BI and BIM / ACC., • Ability to ensure compliance with regulatory requirements., • Ability to collaborate with cross-functional teams., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Familiarity with industry regulations, and standards including safety., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Minimum of an Associates 2-year degree in drafting, 3D modeling, or related field technical experience in construction trade., • Minimum of 1 – 5 years of experience in process design or a similar role. Relevant professional certifications are a plus., • Experience in relevant industry (e.g., food or beverage manufacturing, industrial manufacturing, etc.)., • Experience in sanitary design for the Food & Beverage industry is a plus., • Experience in Utility & Piping design, Electrical & Controls design, Sanitary Tube design, Process Skid design, Equipment design, and Equipment Layouts are preferred.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 25%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description 3rd Class Pipefitter Position Type: Full-time, Non-Exempt, Hourly Reports to: Superintendent Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To have basic working knowledge of mechanical equipment and piping installation and the various terminologies, blueprint reading, measurements, setting equipment/piping, job specifications, etc., to build an integrally complete piping system. Essential Functions • Basic in understanding job specification, blueprint reading, target point measurements and torque requirements for large industrial piping systems., • Hands-on, basic working knowledge of Equipment/Piping center lines and work points., • Basic proficiency in the installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators, etc. to make a complete piping system., • Basic knowledge of all forms of piping system hangers, supports, braces, etc., from temporarily through jam nut completion., • Moderate mechanical aptitude and problem solver who can understand and follow instruction., • Accountability for completion of daily work assignments while monitoring quality, safety and health regulations., • Documentation of all quality reporting methods employed by SEA Quality Standards, • Operate overhead cranes and forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct and monitor two or more helpers., • Comply with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards., • Basic knowledge of pneumatic and hydro process for 150psi testing, inspections, and safety procedures., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Competency • Blueprint and Schematic Reading, • Pipe Layout and Fabrication, • Pipe Joining Methods, • Material Knowledge, • Testing and Inspection, • Problem-solving and Attention to Detail, • Good Spatial Awareness and Physical Stamina, • Communication, Teamwork, Time Management, and Adaptability Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 6:00 a.m. to 4:30 p.m. The second shift days and hours of work are Monday through Friday 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required except for local travel during the business day. Required Education and Experience • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, and gas arc cutting, • Knowledge of datum lining, piping center lines and work points, • Strong attention to detail, basic math and tape measuring skills, • Physical stamina and the ability to work in various conditions (e.g. confined areas and heights) and physically/medically qualified to wear all required PPE, • High School Diploma or GED Preferred Education and Experience • 1 years’ experience in Pipefitting, • Accredited vocational technical training Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionInstrumentation & Controls (I&C) Technician Entry to Mid-Level Location: Florida (Statewide travel required; emphasis on Collier County) About Us We are a growing EPC contractor specializing in the construction and upgrade of critical infrastructure, including electrical substations, water/wastewater treatment facilities, pumping stations, and industrial plants. Our team delivers high-quality, safety-focused solutions for major utility and industrial clients across the state of Florida. Position Summary We are seeking a motivated Instrumentation & Controls (I&C) Technician to support installation, maintenance, and troubleshooting of instrumentation and control systems across a variety of industrial and utility projects. This role is ideal for an entry to mid-level technician who is hands-on, detail-oriented, and eager to grow within the I&C field. You will work under the direction of Lead Technicians and Supervisors while contributing directly to field execution. Key Responsibilities • Install, terminate, and test instrumentation and control wiring, panels, and devices, • Assist with calibration and commissioning of instruments (flow, level, pressure, temperature, etc.), • Read and interpret electrical drawings, P&IDs, loop diagrams, and schematics, • Troubleshoot control systems, including PLC-based systems and associated components, • Support startup and commissioning activities at project sites, • Perform routine maintenance and inspections on I&C equipment, • Ensure all work is completed in accordance with project specifications, codes, and safety standards, • Accurately document work performed, including redlines and field reports, • Maintain tools, equipment, and a clean, safe work environmentQualifications, • 1–5+ years of experience in instrumentation and controls, electrical, or related field, • Basic understanding of industrial control systems and instrumentation, • Ability to read and interpret technical drawings and schematics, • Experience with installation and termination of low-voltage and control wiring, • Familiarity with PLC systems (Allen-Bradley, Siemens, etc.) is a plus, • Strong troubleshooting and problem-solving skills, • Willingness to travel throughout Florida and work in outdoor/industrial environments, • Valid driver’s license and reliable transportationPreferred Experience (Not Required), • Experience in water/wastewater, utilities, substations, or industrial facilities, • Knowledge of SCADA systems, • Instrument calibration experience, • OSHA 10 or 30 certificationWork Environment & Physical Requirements, • Field-based role requiring travel to project sites across Florida, • Work may be performed outdoors in varying weather conditions, • Ability to lift 50+ lbs, climb ladders, and work in industrial environmentsWhat We Offer, • Competitive compensation based on experience, • Opportunities for career growth into Lead or Specialist roles, • Per diem/travel accommodations (when applicable), • Comprehensive benefits package (health, dental, vision, etc.), • 401(k) with company match

Job Description Controls Installation Technician 1 Position Type: Full-time, Non-exempt, Hourly Reports to: Controls Installation Superintendent Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably.Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations.Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective The Control System Installation Technician 1 is the senior-level field installer on Stellar Energy's modular chiller projects across the US, responsible for executing complex controls wiring assignments with full independence while providing technical guidance to the broader installation team. Reporting to the Automation & Controls Installation Superintendent, this role requires strong hands-on proficiency in reading customer-specific wiring diagrams, installing DDC and BAS wiring packages, and resolving installation problems without supervisory involvement. Technician 1 is a reliable production contributor who helps maintain install quality across multiple sites, supports testing activities, and actively develops the skills of Technician 2 and Technician 3 team members as applicable. This is the top individual contributor role on the installation team and the natural stepping stone toward Foreman-level responsibilities. Essential Functions • Execute complex wiring assignments independently - Complete the full scope of controls wiring on assigned chiller builds — including panel terminations, sensor installation, actuator wiring, and BAS connections — accurately and on schedule using customer-specific drawings with no supervisory guidance, • Read and apply customer wiring documentation - Independently interpret control drawings, wiring diagrams, P&IDs, and customer submittal packages to determine correct installation requirements and sequences for each assigned build, • Install DDC and BAS wiring packages - Wire DDC control panels, install and terminate sensors and actuators, make BAS interface connections, and configure basic communication wiring per customer specifications across a range of control platforms, • Identify and resolve installation problems - Troubleshoot and correct wiring errors, termination issues, sensor faults, and communication problems on the production floor without requiring escalation for routine technical issues, • Inspect completed work across the team - Review finished wiring installations against submittal drawings and customer specifications on your own builds and those of Technician 2 and Technician 3 team members, identifying deficiencies and directing corrections before builds advance, • Support functional testing on the line - Assist the Foreman during controls system functional testing and customer FATs by verifying wiring connections, monitoring system behavior, documenting results, and correcting deficiencies found during test, • Keep production moving - Manage your own pace and workload to meet daily build targets, communicate progress and any roadblocks to the Foreman proactively, and step in to help teammates who fall behind to keep the line on schedule, • Coordinate component staging - Confirm that controls components for assigned builds are correctly staged and match customer specifications before installation begins, flagging discrepancies to the Foreman to prevent mid-build delays, • Maintain complete build documentation - Produce accurate as-built markups, ensure all wiring and terminations are correctly labeled, complete test records, and hand off clean documentation packages to the Foreman at build completion, • Develop Technician 2 and 3 team members - Share wiring techniques and installation knowledge with less experienced team members on the floor, demonstrate correct practices in real-time, and help teammates work through installation challenges, • Enforce safety on the line - Follow all electrical safety procedures including lockout/tagout and PPE requirements, correct unsafe conditions or behaviors immediately, and contribute to a strong floor safety culture, • Identify process improvements - Flag recurring installation inefficiencies or wiring problems to the Foreman, suggest practical improvements to installation sequences, and apply lessons learned from completed builds to future work Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Hands-on technical skill - Strong proficiency in low-voltage controls wiring, panel terminations, sensor and actuator installation, and BAS wiring across the control platforms used in Stellar Energy's chiller product line, • Drawing interpretation - Confident ability to read customer wiring diagrams, P&IDs, and submittal documents independently and apply them accurately to production floor installation work, • Independent execution - Completes complex wiring assignments on time and to specification without requiring supervisory direction or step-by-step guidance, • Troubleshooting ability - Diagnoses and resolves wiring errors, communication faults, and installation problems efficiently without disrupting production flow, • Quality ownership - Inspects own work and others' thoroughly, catches deficiencies before builds advance, and takes personal responsibility for delivering zero-defect installations, • Team development - Actively shares knowledge, demonstrates techniques, and helps Technician 2 and 3 team members grow their skills on the production floor, • Production focus - Understands build schedules, manages pace effectively, and communicates progress and issues to keep the line moving, • Safety leadership - Models correct electrical safety practices, reinforces safe behaviors across the team, and addresses hazards immediately, • Clear communication - Provides accurate status updates to the Foreman, escalates issues in a timely manner, and communicates clearly with teammates, • Attention to detail - Consistently applies correct wire routing, color coding, labeling, and termination standards that reflect quality workmanship on every build Supervisory Responsibility This position does not have supervisory responsibilities. Work Location This position will work out of our Jacksonville, FL facilities. This position is not approved for telecommuting or working remotely. Work Environment This position operates on the production floor of a high-volume modular chiller manufacturing facility, directly supervising controls installation activities across multiple concurrent builds. The Controls Installation Foreman maintains constant presence in areas where control panels are being built, automation wiring is being installed, and systems are being tested. While performing the duties of this job, the employee works throughout the shop floor leading team activities and is regularly exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. This role requires managing multiple customer specifications simultaneously while maintaining production pace and ensuring each controls system meets unique client requirements. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position requires active production-floor presence throughout the shift to lead team operations and provide hands-on technical support. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand; walk; use hands for detailed work with wiring, terminations, and control system components; and reach with hands and arms into control panels and equipment compartments. The employee is regularly required to climb ladders or platforms to access elevated equipment; and stoop, kneel, crouch or crawl to work with floor-level sensors and field devices. The employee must frequently lift or move up to 25 pounds and occasionally lift or move up to 50 pounds. Stamina to remain engaged and responsive throughout the shift while managing multiple priorities is essential. Specific vision abilities required include close vision for precision wiring work and inspection, color vision for wire identification and sensor verification, depth perception for panel work, and ability to adjust focus between drawings and installed equipment. Position Type/Expected Hours of Work This is a full-time position, with overtime regularly scheduled to meet production demands. Standard hours are Monday through Friday, 7:00 a.m. to 4:30 p.m. Occasional evening and weekend work may be required to support automation system commissioning, customer witness testing, or critical project deadlines. Travel Travel is expected to be approximately 40% confined to the US. Required Education and Experience. • High school diploma or GED required; associate degree or technical certification in Electrical Technology, Building Automation, or a related field preferred, • 3-5 years of hands-on experience installing low-voltage controls wiring, DDC systems, or BAS components in a manufacturing, OEM, or commercial HVAC environment, • Demonstrated ability to read and independently apply customer control drawings, wiring diagrams, and P&IDs in a production setting, • Solid working knowledge of at least one BAS protocol (BACnet, Modbus, or LON) as applied to wiring and termination work, • Experience with DDC control panel wiring and NEC Article 725 Class 1/Class 2 low-voltage circuit practices, • Proven track record delivering quality installations under production schedule pressure, • OSHA 10 required; Competent Person electrical safety training preferred Preferred Education and Experience • Associate degree in Electrical Technology, Building Automation, or related technical field, • Experience in a modular or skid-built equipment manufacturing environment, • Familiarity with chiller or HVAC control system components including sensors, actuators, VFD wiring, and safety circuits, • BAS platform exposure (Johnson Controls, Siemens, Honeywell, Automated Logic, or equivalent), • Experience supporting functional testing or factory acceptance testing (FAT) on production equipment Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean background check and random drug screening consent. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities

Job Description Field Quality Manager Position Type: Full-time, Exempt, Salary Reports to: Reporting Manager Title Supervisory Responsibility: Field Quality Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective The Field Quality Engineering Manager leads the field execution of quality programs and ensures high standards for workmanship, engineering compliance, documentation, and continuous improvement across projects. This role provides strategic direction and operational oversight to support delivery, installation, and commissioning processes—ensuring Stellar Energy project deliverables meet client and regulatory quality requirements. Essential Functions Quality Leadership & Oversight • Lead, manage, and mentor a team of Field Quality Engineers and quality personnel at job sites., • Establish and enforce field quality inspection programs, procedures, and reporting frameworks., • Ensure consistent quality standards are implemented across multiple active projects., • Serve as key quality liaison with clients, EPC partners, subcontractors, and internal stakeholders. Inspection & Verification • Oversee field inspections of modules, materials, and components., • Coordinate external, 3rd-party, customer, or regulatory inspections. Quality Systems Management • Implement and maintain ISO 9001:2015 compliance practices in the field environment., • Lead internal auditing activities and support external certification audits., • Drive continuous improvement and lean quality practices in execution. Project Partnership & Communication • Collaborate with project management, engineering, and procurement to mitigate risk and anticipate quality demands., • Provide quality performance reporting and proactive communications to executive stakeholders., • Represent Stellar Energy professionally during client meetings, audits, and site reviews. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Strategic Quality Leadership, • Technical & Analytical Problem Solving, • Team Collaboration & Mentorship, • Operational Discipline, • Professional Client Interaction, • Continuous Improvement Mindset, • Strong problem-solving, communication, and organizational skills, • Advanced knowledge of quality methodologies such as DMAIC, 8D, PDCA, A3, RCA, and statistical analysis., • Familiarity with ISO 9001:2015 QMS requirements. Supervisory Responsibility This position has supervisory responsibilities. Work Location This position will work out of our Normandy Facilities in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment This position operates mainly in a construction site and operating industrial plant environment. The employee must always comply with safety policies, practices, and procedures. Work is primarily done in the field which could be in a construction area requiring the use of earplugs, hardhat, steel-toe boots, and safety glasses. The work environment could be outdoors, hot, or cold, noisy, and/or dirty. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. This is a full-time position that may require working over 40 hours in the workweek. This may include evenings, overnight, weekdays, weekends, or holidays. Travel Anticipated travel for this position is more than 50%. Required Education and Experience. • 7+ years of industrial QA/QC experience in engineered systems, manufacturing, construction, or field installation., • 3+ years leadership experience and ability to manage field technical teams., • Proficiency in Microsoft Office tools. Preferred Education and Experience • Bachelor’s degree in engineering, Quality, or related technical field., • QMS auditor certification., • Experience with mechanical equipment such as pumps, chillers, heat exchangers, etc., • OSHA 30 certification., • Six Sigma Green/Black Belt or equivalent training. Additional Eligibility Qualifications None. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Position Title: Quality Control Inspector Essential Functions • Pull and check tags on vehicles., • Verifies that all parts are in stock., • Match specific parts to vehicles needing installation and place them with the appropriate vehicle., • Record parts removed from inventory into database., • Keep an accurate inventory count of all parts in stock., • Conducts annual hard count inventory of all parts., • Completes QC Inspection Form for all completed installs., • Ensure no damage happened during the installation., • Effective communicator in listening, writing, and verbal., • Must be detail oriented., • Ability to solve problems., • Ability to work as a team., • Ability to organize and prioritize competing responsibilities., • Punctual and dependable person. Supervisory Responsibility This position has no direct reports. Work Environment Well-lighted, heated and/or air-conditioned indoor office, production setting, outdoor/indoor shop environment or enclosed vehicle with adequate ventilation and protection from extreme weather conditions. Outdoors exposed to changing and/or extreme weather conditions (for instance, rain, sun, snow, wind, humidity, etc.). Physical Demands Light physical activity performing non-strenuous daily activities of an administrative or production/technical nature. Manual dexterity sufficient to reach and handle items. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are primarily 8 hours each day, Monday through Friday on a day shift. This position often requires overtime. Travel There are no travel requirements for this position. Required Education and Experience High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Preferred Education and Experience One-year certificate from college or technical school, or three to six months of related experience and/or training, or equivalent education and experience. Computer Operations Basic personal computer skills Work Authorization/Security Clearance Must be able to obtain TWIC badge (Transportation Working Identification Card) Valid Driver's License Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Pipefitter Journeyman Position Type: Full-time, Non-Exempt, Hourly Reports to: Superintendent Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To have experienced working knowledge of mechanical equipment and piping installation and the various terminologies, blueprint reading, measurements, setting equipment/piping, job specifications, etc., to build an integrally complete piping system. Essential Functions • Installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators, etc. to make a complete piping system., • Installation of all forms of piping system hangers, supports, braces, etc., from temporarily through jam nut completion., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Documentation of all quality reporting methods employed by SEA Quality Standards, • Operate overhead cranes and forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct, monitor, and assist team or less experienced pipefitters when needed., • Comply with all company policies, procedures, and safety requirements and physically / medically qualified to wear required PPE per OSHA standards., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Competency • Blueprint and Schematic Reading, • Pipe Layout and Fabrication, • Pipe Joining Methods, • Material Knowledge, • Strong mechanical aptitude, • Testing and Inspection, • Problem-solving and Attention to Detail, • Communication, Teamwork, Time Management, and Adaptability, • Strong attention to detail, basic math and tape measuring skills, • Physical stamina and the ability to work in various conditions (e.g. confined areas and heights) and physically/medically qualified to wear all required PPE, • Knowledge of datum lining, piping center lines and work points, • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, and gas arc cutting Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 a.m. to 2:30 p.m. Second shift is Monday through Friday, 3:00 p.m. to 1:30 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception of local travel during the business day. Required Education and Experience • Pipefitter Journeymen license, • Minimum of 8 years’ experience in Pipefitting, • Fluent in all hydro process for 150 PSI testing and inspections Preferred Education and Experience • 10 years of experience in Industrial Mechanical Fitting, • Accredited vocational technical training Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionPosition SummaryConfigures, tests, documents, implements, and supports computer application systems by coordinating with vendor representatives, system users/clients, project team members, coworkers, and management. Participates in project teams, configuration, implementation, on-going maintenance and support for production application systems. Has general knowledge of project methodology, NextGen EPM & EHR, and system development lifecycle and works under direct supervision and performs tasks as assigned. The primary focus of this role is administration and support of the Company’s electronic health record, practice management application and associated systems.Duties and Responsibilities • Works as a member of a team of internal resources and external vendors to select, configure and implement a packaged software solution for practice management and electronic medical records., • Assists with all aspects of the project including process mapping, software design and configuration, system testing, training development, conversion planning and site-by-site implementation., • Coordinates with others on project team to develop the project plan, including costs and departmental tasks., • Works with our technical staff to coordinate the installation of computer hardware and/or network connectivity as needed., • Works closely with physicians, center managers, medical assistants and others in our user community., • Develops high quality documentation such as system requirements, design specifications, user training plans, user guides, etc., • Functions as a key member of a multi-dimensional IS team., • Works closely with technical and non-technical staff to gather requirements, • Coordinates and documents business and technical presentations, • Serves as technical subject matter expert on projects and trains users and others throughout the organization., • Directly interface with external vendors and partners., • Responds to support tickets and resolves issues in a timely manner., • Bachelor’s degree preferred or equivalent work experience. Experience: • Minimum of 5 years of experience as a Business Analyst, SQL Developer, or Database Administrator., • SQL experience required including query development, stored procedures, and general database knowledge., • Experience in a healthcare environment preferred, including knowledge of Electronic Health Record and Practice Management., • Experience in NextGen EPM and EHR preferred including file maintenance configuration, system administration, and template development., • Business Intelligence and reporting experience a plus. Additional Knowledge, Skills and Abilities: • HL7 Interface administration., • Strong ability to research new technologies and solutions as well as changing business rules., • Tier 3 troubleshooting and issue resolution., • Project management, team collaboration, communication skills, time management, problem solving, organizational skills, prioritization, self-driven

Job Description Venture Dynamics is seeking skilled Shipfitters to support Navy and commercial ship repair operations. The Shipfitter performs structural layout, fit-up, and steel fabrication work aboard vessels and in dry dock environments. This role supports hull repairs, insert installations, structural modifications, and equipment foundations in active shipyard settings. Shipfitters work closely with Structural Welders and other trades to complete steel renewal and alteration projects. Per diem may be available depending on contract requirements and travel distance. Responsibilities • Lay out, fit, and assemble structural steel components including bulkheads, decks, frames, brackets, and foundations, • Perform steel insert installation, structural modifications, and hull repairs, • Read and interpret structural drawings, blueprints, and work packages, • Measure, mark, and cut steel using oxy-fuel, plasma, and mechanical cutting tools, • Align and prepare structural joints for welding operations, • Install temporary supports, strongbacks, and structural reinforcements as required, • Minimum 5 years of ship repair experience as a Shipfitter in a shipyard or marine industrial environment, • Strong proficiency with structural layout, steel fitting, and insert installation, • Ability to read and interpret structural drawings and weld symbols, • Experience using cutting torches, grinders, alignment tools, and fitting equipment, • Ability to perform structural layout and dimensional verification, • Firewatch trained, or ability to obtain firewatch training, in accordance with NAVSEA Standard Item 009-70 or OSHA 29 CFR 1915.504, • Ability to obtain and maintain required base access credentials, including DBIDS, • Experience working aboard Navy vessels or to NAVSEA structural standards, • Experience supporting availability-level ship repair or modernization projects, • OSHA 10 Maritime certification Work is performed aboard vessels, in dry docks, and in industrial shipyard environments supporting Navy and commercial ship repair operations. Duties require working in confined and elevated spaces including tanks, voids, and overhead compartments. Exposure to industrial noise, heat, sparks, and structural hazards is expected. PPE is required in accordance with site safety policies, and respiratory protection may be required based on task or location. Work schedules may include overtime, nights, weekends, and variable shifts depending on production requirements. Venture Dynamics is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status in accordance with applicable law.

Job Description 1st Class Pipefitter Position Type: Full-time, Non-Exempt, Hourly Reports to: Superintendent Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To have experienced working knowledge of mechanical equipment and piping installation and the various terminologies, blueprint reading, measurements, setting equipment/piping, job specifications, etc., to build an integrally complete piping system. Essential Functions • Installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators, etc. to make a complete piping system., • Installation knowledge of all forms of piping system hangers, supports, braces, etc., from temporarily through jam nut completion., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Documentation of all quality reporting methods employed by SEA Quality Standards, • Operate overhead cranes and forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct, monitor, and assist team or less experienced pipefitters when needed., • Comply with all company policies, procedures, and safety requirements and physically / medically qualified to wear required PPE per OSHA standards., • Be fluent in all hydro process for 150psi testing and inspections., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Competency • Blueprint and Schematic Reading, • Strong Mechanical aptitude and problem-solving skills, • Pipe Layout and Fabrication, • Pipe Joining Methods, • Material Knowledge, • Testing and Inspection, • Problem-solving and Attention to Detail, • Good Spatial Awareness and Physical Stamina, • Communication, Teamwork, Time Management, and Adaptability Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 a.m. to 2:30 p.m. Second shift is Monday through Friday, 3:00 p.m. to 1:30 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception of local travel during the business day. Required Education and Experience • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, and gas arc cutting, • Fluent in all hydro process for 150 PSI testing and inspections, • Minimum of 6 years’ experience in Pipefitting, • Knowledge of datum lining, piping center lines and work points, • Strong attention to detail, basic math and tape measuring skills, • Physical stamina and the ability to work in various conditions (e.g. confined areas and heights) and physically/medically qualified to wear all required PPE, • High School Diploma or GED Preferred Education and Experience • 8 years of experience in Industrial Mechanical Fitting, • Accredited vocational technical training Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Overview: We are seeking an experienced and strategic Senior Director of Operations to lead and scale the operational success of Superior Fence & Rail's corporate operations. The Sr Director of Operations oversees the day-to-day operations and long-term success of Superior Fence & Rail North Florida and Central Florida locations. The Director is responsible for managing the fabrication, production, and installation teams, and implementing strategic processes and systems that drive company growth across both the residential and commercial spaces. Key Responsibilities: • Assist in strategic planning and vision to the organization, as well as align company objectives with Empower Brands' overall strategic goals., • Help drive the growth of the businesses and ensure appropriate talent, metrics, and strategy are in place to support that growth., • Monitoring financial activities as well as ensuring EBITDA goals are met on a monthly and annual basis., • Partner closely with Brand President and Director of Franchise Operations to ensure alignment between corporate operations and franchise operations., • Support new franchisee training during franchisee visits., • Work closely with the Marketing department to create and implement new marketing and lead generation initiatives driving increased lead flow and revenue growth., • Oversee departmental leaders to ensure company goals and objectives are being met., • Have a strong knowledge of the franchising and construction industries to ensure the business model is best suited and evolves as needed., • Continually confirm the brand is adhering to legal guidelines and in-house policies to maintain Superior Fence & Rail's legal and business ethics., • Foster a culture that promotes high ethical standards and respect of all internal and external customers. Qualifications: • Bachelors Degree in Business or a related field, • 5+ years of direct leadership experience in franchising, construction, or home services industries. Fencing industry experience a major plus., • Proven track record in achieving results and driving business growth., • Proven leadership experience with demonstrated ability to lead cross-functional projects and achieve key objectives., • Highly motivated, self-starter with a strategic mindset., • Excellent written and verbal communications skills., • Exceptional business acumen, presentation skills, and the ability to command a room.WHO WE ARE: Empower Brands was founded in 2022 as a product of the integration of Lynx Franchising and Outdoor Living Brands. Empower encompasses ten industry-leading brands across commercial and residential services: JAN-PRO, FRSTeam, Archadeck Outdoor Living, Outdoor Lighting Perspectives (OLP), Conserva Irrigation, Koala Insulation, Wallaby Windows, Superior Fence and Rail, Bumble Roofing and Canopy Lawn Care. Empower is dedicated to providing its customers with the highest quality products and services in the commercial and home services industry while simultaneously delivering its franchise owners committed personal support, tools and empowerment to pursue their own success. Empower Brands is a portfolio company of MidOcean Partners, a leading private equity firm with an excellent track record investing in successful, growth-focused franchise businesses. For more about Empower Brands, visit the company's new website at EmpowerFranchising.com.Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Empower Brands is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Empower Brands makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description 3rd Class IMP Fitter Position Type: Full-time, Non-Exempt, Hourly Reports to: IMP Superintendent/IMP Foreman Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective To have experienced working knowledge of the Insulated Metal Panel installation, Assembly and the various terminologies, blueprint reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. Essential Functions • Fluent in understanding job specification, blueprint reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems., • The ability to cut, prep, fit and tack small to large; IMP’s, Flashing, etc., from various material types through true-plumb-square; into weld ready status, using isometric and structural drawings, while adhering to specific fit tolerance requirements., • The ability to properly select, measure, hand dress, and cut with grinder, power saws, hand tools, etc., as necessary to prepare IMP process to be completed per job specific requirements., • Strong structural aptitude and problem solver who can understand and follow instruction., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct and monitor two or more helpers., • Documentation of all quality reporting methods employed per SEA Quality Standards., • Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Collaboration Skills, • Reliable Attendance, • Decision Making, • Leadership, • Communication Proficiency; Written and Verbal, • Ethical Conduct, • Problem Solving, • Organizational Skills, • Thoroughness, • Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required except for local travel during the business day. Required Education and Experience • Basic math and language skills are required., • Grinding, welding, brazing, rigging, and cutting sheet metal., • 1 Year related experience or training Preferred Education and Experience • 1 Year experience in Insulated Metal Panels (IMP)., • Some vocational technical training is desired. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description About Us: IMC Fire Protection has proudly served as Northern Florida’s top provider of fire protection services since 2018. Providing full-service fire protections services designed with hotels, resorts, manufacturing facilities, and military projects in mind, we offer one-stop solutions that include fire sprinkler installation, inspections and service, fire alarm installation, inspections and service, backflow preventer inspections, repairs, and more. Role Overview: Responsible for installing, repairing, and maintaining fire sprinkler systems in commercial and industrial buildings. This role ensures fire protection systems function properly and comply with fire safety codes and regulations. Key Responsibilities: • Assemble, install, and modify fire sprinkler systems, including pipes, fittings, and valves, according to blueprints and building specifications, • Inspect, test, and repair sprinkler systems to ensure they meet safety and operational standards, • Cut, thread, groove, and weld pipes to ensure proper system connections, • Ensure all work meets NFPA (National Fire Protection Association) codes, OSHA safety standards, and local fire regulations, • Conduct pressure tests and flow tests to verify system functionality, • Read and interpret blueprints, schematics, and technical documents, • Work with contractors, project managers, and other tradespeople to complete installations efficiently, • Maintain records of work performed, including inspection reports and service logs Required Skills and Experience: • High school diploma or GED, • Minimum 2 years of experience working as a sprinkler fitter Competencies: • Attention to detail and problem-solving skills, • Strong communication and teamwork abilities, • Time management and ability to meet deadlines, • Commitment to safety and compliance Working Conditions: • Indoor and outdoor environments with exposure to high and low temperatures, • Exposure to noise and dust, • Must be able to bend, climb, and work in confined spaces., • Must be able to lift and carry up to 50 pounds., • Prolonged periods of standing, kneeling, or working in awkward positions. We offer a competitive and comprehensive benefits package that includes: • Health insurance (medical, dental, vision), • Retirement plans (401(k) with company match), • Paid time off (PTO) (vacation and holidays), • Life and disability insurance

Job Description The Senior Process Engineer is responsible for leading the design and implementation of solutions that meet the needs of our food and beverage manufacturing operations. This role requires an understanding of food processing technologies, the design and delivery of production systems for food and beverage manufacturing facilities, with an emphasis on raw material storage, processing, thermal processing, mixing & blending, filling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure that all process solutions are fully developed for a successful operation. Duties/Responsibilities: • Design processes to achieve project goals, • Define processing steps required to make food or beverage products, handle waste or byproducts, and cleaning systems., • Calculate equipment rates, create optimal food plant layouts, and prepare block and/or process flow diagrams to ensure all flows are understood and included in the design., • Engineer process equipment & systems, • Perform process calculations, size and select equipment & components; ensure designs comply with relevant codes, standards, & sanitary practices., • Develop P&ID’s, equipment specifications, installation specifications, equipment lists, controls narratives for coordination, and coordinate 3D modeling with design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the process into plant infrastructure., • Support procurement of equipment & installation packages, • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Support installation of process equipment, • Review installation submittals and participate in subcontractor coordination meetings., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Startup & commissioning of process equipment, • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations., • Other duties as assigned.Required Skills/Abilities:, • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor of Science Engineering degree in Chemical, Manufacturing, Mechanical, or a related field., • Advanced degrees or certifications in continuous improvement methodologies are advantageous., • Minimum of 1-7 years of experience in food or beverage manufacturing systems. Relevant professional certifications are a plus., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of Ingredients and their reactions to heating, cooling, mixing, blending, pumping., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Skilled in relevant software; Microsoft Office Software, AutoCAD, Inventor, Revit, Procore, Bluebeam, Adobe, Power BI, and ACC is preferred., • Experience with process design and engineering in a design-build or EPC setting., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture is a plus.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Overview Pay: $16 – $19 per hour + commission Earning potential: $20 – $30 per hour on average with commission Schedule: Hours available between Monday - Sunday Location: Jacksonville, FL Part-time and full-time opportunities available Join Florida Home, in partnership with American Residential Services (ARS), the nation’s largest provider of residential HVAC, heating, air conditioning, plumbing, and electrical services, with over 7,000 professionals and 45+ years of trusted home service experience. We are hiring Retail Lead Generators to work inside national home improvement retail stores promoting HVAC services, heating and air conditioning tune-ups, system replacements, and indoor air quality solutions. This is a great opportunity for individuals who enjoy speaking with people and want to earn hourly pay plus commission while introducing homeowners to professional HVAC services and consultations. What We Offer * Weekly pay via direct deposit * Commission paid on top of hourly rate * Paid training — no HVAC experience required * Career path into HVAC Sales Advisor roles * Flexible part-time and full-time schedules Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities As a Retail Lead Generator, you will engage with retail shoppers and introduce them to ARS heating and air conditioning services. * Engage customers inside retail store locations to discuss HVAC upgrades, heating and air conditioning services, and indoor air quality solutions * Promote free in-home HVAC consultations and HVAC tune-ups * Generate leads for residential HVAC service, HVAC installation, and system replacement consultations * Educate homeowners about energy savings and comfort improvements through heating and air conditioning systems * Schedule appointments for HVAC service technicians or HVAC comfort advisors * Represent the ARS brand with professionalism and enthusiasm Qualifications What You Need * Outgoing personality and willingness to speak with shoppers * Retail, sales, or customer service experience preferred (not required) * Ability to stand and walk during shifts * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance representing the ARS brand * Ability to attend weekly in-office meetings For questions about the role, you may contact our management team at 904-403-4122 *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. *Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job DescriptionOverview We are seeking a detail-oriented CAD Designer to support the design and documentation of physical security systems for commercial and enterprise clients. This role focuses on producing accurate, code-compliant drawings that support access control, video surveillance (CCTV), intrusion detection, intercom, and related low-voltage systems. The ideal candidate has strong AutoCAD skills, understands construction documents, and collaborates effectively with sales, engineering, and project teams. Key Responsibilities • Develop and maintain detailed CAD drawings for physical security systems, including:, • Access control, • Video surveillance (CCTV), • Intrusion detection, • Intercom and other low-voltage systems, • Produce floor plans, riser diagrams, device layouts, detail sheets, and as-built drawings, • Interpret architectural, electrical, and mechanical drawings to ensure accurate system placement, • Coordinate with sales engineers, project managers, and field teams to ensure designs align with project scope and customer requirements, • Update drawings based on redlines, field feedback, and change orders, • Ensure all drawings comply with industry standards, local codes, and project specifications, • Maintain CAD standards, templates, and organized file structures, • Support pre-sales design efforts and post-installation documentation as neededRequired Qualifications, • Proficiency in AutoCAD (AutoCAD Electrical or similar preferred), • 2+ years of experience creating CAD drawings for low-voltage, physical security, or systems integration projects, • Strong understanding of construction documentation and floor plan interpretation, • Working knowledge of physical security systems and components, • Excellent attention to detail and organizational skills, • Ability to manage multiple projects and meet deadlines, • Strong communication skills and ability to collaborate with cross-functional teamsNice-to-Have Skills, • Background in cable installation or field work, • Hands-on experience with low-voltage installations, • Familiarity with access control systems, VMS platforms, and device manufacturers, • Knowledge of basic electrical principles and structured cabling standards, • Experience with Bluebeam, Visio, or BIM coordinationEducation & Certifications What’s Provided: • Full-time, in-office role, • Laptop and cell phone provided, • Career growth and leadership opportunities, • Health, dental, and vision insurance, • 401(k) with company benefits, • Support for continued certificationsWork Environment, • Office-based (some hybrid flexibility depending on location), • Fast-paced, project-driven environment with a strong emphasis on accuracy, • Occasional site coordination or travel may be required Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About TEKsystems We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Description: Company Description Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, give back to the communities where they live and work, and demonstrate the ITW values of Integrity, Simplicity, Trust, Respect and Shared Risk. Job Description These are the most significant job duties performed. The size, scope and complexity of assigned duties and responsibilities are dependent on the level and experience of the incumbent. To perform this job successfully, an individual must be able to perform each assigned essential duty satisfactorily. Other responsibilities or special projects not specifically listed below may also be assigned. • Entering and managing installation opportunities in CRM to develop accurate monthly forecasts, • Conducting site installation surveys to collect necessary information for install feasibility and planning the execution in CRM, • Producing scope of works and customer facing installation quotes in CRM, • Working with dispatchers and other branch personnel to schedule installs in Microsoft Field Service adhering to promise dates for customers, • Executing the installation per the scope of work to customer satisfaction and by adhering to safety manuals and programs, • Strong adherence to installation playbook from start to end (machine at customer site to leaving customer site after successful startup), • Effective management of installation request inbox, • Strong project management skills by managing schedule dates and completion dates in CRM and information relayed to the customer and to other branch leadership personnel, • Proper final pricing updates to CRM opportunities that support branch and organization financial objectives, • Maintains current organization, industry, and equipment knowledge., • Strong communication with customers on overall Hobart Service value propositions for future service products after warranty expires for new machine, • Proper vehicle maintenance and handling of installation material handling equipment, • Adherence to the company's safe driving policy and other applicable policies including safety, • Other duties as assigned Supervisory Responsibilities This position has no direct or indirect supervisory responsibilities. Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Education and Work Experience • High school diploma or GED, • 2 years of formal technical training and at least ten years of related experience, • Equipment installation or similar experience, • PC knowledge and suite of Microsoft applications Desired Education/Experience • 5+ years of installation experience in commercial equipment, • Mechanical or electrical experience is preferred, but not required, • Associate degree is preferred, but not required, • Experience installing and removing commercial cooking and/or refrigeration equipment is highly desirable, • Prior experience using Microsoft Dynamics 365 CRM Certificates and Licenses Position/Location dependent, • Industry certification is highly desirable COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies. Technical and Analytical Skills • Ability to read and interpret standard service manuals, installation manuals, and mechanical diagrams., • Understanding of basic math (addition, subtraction, multiplication, division, calculations of percentages, measurement conversions)., • Compiles and summarizes data for supervisor and/or branch manager that will help him/her with creating customer-focused strategies for fostering relationships and sales (e.g., equipment leads, contract leads, water treatment order leads)., • Demonstrates accuracy and thoroughness., • Looks for ways to improve and promote quality., • Applies feedback to improve performance., • Completes work in timely manner., • Strives to increase productivity., • Is consistently at work and on time., • Ensures work responsibilities are covered when absent., • Is consistently at work and on time., • Ensures work responsibilities are covered when absent., • Follows instructions, responds to management direction., • Balances team and individual responsibilities., • Exhibits objectivity and openness to others' views., • Gives and welcomes feedback., • Contributes to building a positive team spirit., • Puts success of team above own interests., • Able to build morale and group commitments to goals and objectives., • Supports everyone's efforts to succeed., • Recognizes accomplishments of other team members., • Keep commitments., • Commits to extended hours of work when necessary to reach goals., • Ability to read and understand safety guidelines of the business., • Ability to approach job responsibilities with an emphasis on safety, efficiency, and quality., • Performs periodic visual safety inspections of vehicle and equipment, reports vehicle and tool defects and takes them out of service until repairs are made or items replaced., • Prioritizes regular workload, special tasks and concurrent projects, allocating time and resources to ensure that work is completed accurately and efficiently within the established time frame., • Must be able to multi-task; work on site visits, compose quotes and lead an installation crew, • Demonstrated ability to communicate orally with individuals from within and outside the organization, • Demonstrates crisis/conflict resolution skills, • Ability to self-motivate and take direction from management, • Thrives in a multi-tasking environment and can adjust priorities quickly, • Timely customer communication on installation updates PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands While performing the duties of this Job, the employee may: • Lift up to 75 lbs. with or without assistance, • Climb up to 10 ft with an A-frame ladder, • Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet, • Extensive walking 3-5 miles / day, • Extensive driving 5-6 hours/day, • Kneel, squat, bend, push/pull, • Move in various positions to accomplish tasks in various environments including tight and confined spaces, • Operate motor vehicles or heavy equipment (i.e., forklift), • Operate machinery and/or power tools Working Conditions, • Office facility and customer facilities (including commercial kitchens of various types of businesses), • Exposure to noise, heat, cold, slippery, wet dirty conditions may occur, • Travel requirement up to 50% of time Hours of Work, • Normal business hours with occasional/frequent/extended hours as needed, • Flexibility with schedule to meet critical deadlines, • Normal scheduled hours cover early mornings, evenings and/or weekends, • Extended hours may include nights and/or weekends About Us: Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, give back to the communities where they live and work, and demonstrate the ITW values of Integrity, Simplicity, Trust, and Respect. We offer a competitive salary and benefits package including medical, dental, and life insurance, short and long-term disability benefits, holiday and vacation pay, 401(k) with liberal matching funds, and educational reimbursement. Hobart Service is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. ITW and Hobart Service are committed to providing a healthy and safe environment for all employees. To demonstrate this commitment, Hobart Service is tobacco-free (including e-cigarettes) on campuses and within company vehicles and maintains a drug-free workplace. If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please contact Human Resources at to request assistance. No other requests will be acknowledged. ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. #ZR1 ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.