Trabajos listing coordinator en Hartford, ConnecticutCrear alertas

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The Shaping Machinist will independently and safely set up and operate CNC and manual shapers. Essential Functions • Read and understand process travelers, setup journals, operation sheets and CMM inspection reports to produce complex finished product., • Setup, tooling adjustments and program offsets as necessary., • Ability to accurately inspect work utilizing various instruments including gages, indicators and micrometers., • Perform daily TPM responsibilities., • Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required., • Actively participate in cross-training, cost savings and team activities to improve processes., • Technical capacity, • Problem-solving / analysis, • Initiative, • Minimum of 1 year of aerospace CNC machining experience is required., • High school diploma or equivalent required. This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company, founded in 1982, has grown through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions · Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. · Make tooling adjustments and program offsets as necessary. · Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. · Perform daily TPM responsibilities. · Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. · Actively participate in cross-training, cost savings and team activities to improve processes. · Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies · Technical capacity · Problem-solving / analysis · Initiative · Results-driven Experience and Education · Minimum of 3 years of aerospace CNC machining experience is required. · High school diploma or equivalent required. · Degree/certificate from vocation school or college program is a plus, but relevant experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The Shaping Machinist will independently and safely set up and operate CNC and manual shapers. Essential Functions · Read and understand process travelers, setup journals, operation sheets and CMM inspection reports to produce complex finished product. · Setup, tooling adjustments and program offsets as necessary. · Ability to accurately inspect work utilizing various instruments including gages, indicators and micrometers. · Perform daily TPM responsibilities. · Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. · Actively participate in cross-training, cost savings and team activities to improve processes. · Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies · Technical capacity · Problem-solving / analysis · Initiative · Results-driven Experience and Education · Minimum of 1 year of aerospace CNC machining experience is required. · High school diploma or equivalent required. · Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company, founded in 1982, has grown through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success. Position Summary The assembly technician will use mechanical skills and attention to detail to independently and safely assemble, test and inspect various components according to customer specifications, internal process documentation and industry quality standards. Essential Functions • Read and understand process travelers, setup journals, tooling sheets, operation sheets and all applicable documentation to produce complex finished product., • Understands the use of various types of installation tools including standard and electronic torque wrenches, hydraulic and air press., • Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands, verniers, microscope and functional gages., • Complete Quality/Inspection documentation, certifying compliance to prescribed work instructions., • Properly manage inventory of assembled components by putting/pulling details from storage, building assembly kits and shadowboxing., • Perform daily TPM responsibilities., • Maintain good housekeeping practices in work areas. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required., • Actively participate in cross-training, cost savings and team activities to improve processes., • Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies - Skills • Technical capacity, • Quality driven with attention to detail, • Fundamental basic computer skills, • Knowledge of FOD Awareness and 6s practices, • Problem-solving / analysis, • Initiative, • Strong, aerospace mechanical experience is required., • Aerospace Assembly experience is preferred., • High school diploma or equivalent required., • Degree/certificate from vocation school or college program is a plus, but experience may substitute for education. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk, sit, stoop, kneel, crouch and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company, founded in 1982, has grown through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions · Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. · Make tooling adjustments and program offsets as necessary. · Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. · Perform daily TPM responsibilities. · Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. · Actively participate in cross-training, cost savings and team activities to improve processes. · Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies · Technical capacity · Problem-solving / analysis · Initiative · Results-driven Experience and Education · Minimum of 5 years of aerospace CNC machining experience is required. · High school diploma or equivalent required. · Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 5 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description ID/OD Grind Machinist - 1st Shift - (1156) (Full Time) Location: Windsor, CT The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary This machinist will independently and safely set up and operate precision CNC ID-OD grind equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work very close tolerances utilizing various instruments, including air gage, OD indicating gaging, indicators, profilometers, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 3 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The CNC Programmer is responsible for the development and implementation of programming into manufacturing operations to meet production requirements and quoted cost. The key emphasis is in process definition and development with technical support of tooling, work instructions, floor support, troubleshooting and continuous improvement activities. Essential Functions · Develop and maintain various machining CNC programs for 3/4/5 axis machines to meet customer design criteria and manufacturing cadence to ensure the highest quality of manufactured components. · Conduct time study jobs to balance and define operator standard work. Generate standard work charts and process capacity table and compare actual performance to quoted estimates in current cost models. · Troubleshoot and improve operations including but not limited to fixturing issues, CNC program and/or parameter issues and expendable tooling issues until problem is resolved. · Utilize SPC charts and other process capability methods to increase first time yields to within quoted standards and monitor data for trending analysis. · Assist in cost estimating for production jobs and for all new product introduction (NPI) requests and interaction with tooling vendors. · Support Engineering and Operations to resolve technical issues with customers and suppliers regarding processes, purchase orders and specifications. · Other activities, duties or responsibilities may change at any time with or without notice. Competencies · Must have strong mechanical aptitude · Strong organizational skills · Excellent attitude and teamwork · Solid Modeling using SolidWorks or NX, experience with ERP Systems · Experience and Education · Must have previous process engineering experience supporting CNC lathes, mills and grinding equipment. · Bachelor of Science Degree in Mechanical Engineering, Manufacturing Engineering, Materials Science or other related Bachelors degree. · Supervisory Responsibility · This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $80000 $110000 / year Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled While we appreciate and value our staffing partners,we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 3 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary This position is responsible for cutting, mounting and polishing samples, as well as microhardness testing. Essential Functions • Cut, mount and polish samples to prepare them for micro-hardness testing and microstructure evaluation., • Perform micro-hardness testing and basic microstructure evaluations., • Review furnace charts., • Maintain lab equipment and supplies., • Technical capacity, • Communication proficiency, • Problem-solving / analysis, • Decision-making, • Initiative, • Read and comprehend blueprints, procedures specifications and sampling plans in English., • Knowledge of basic metallurgical principles, standards, methods and practices is a plus., • Solid basic math skills required., • Must be able to work in a fast-paced shop environment., • Some heavy lifting is required. This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision. While performing the duties of this job, the employee is frequently required to sit and use hands to finger, handle, or feel. The employee is occasionally required to stand; walk and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $60000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary This machinist will independently and safely set up and operate precision CNC ID-OD grind equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work very close tolerances utilizing various instruments, including air gage, OD indicating gaging, indicators, profilometers, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 3 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary This machinist will independently and safely set up and operate precision CNC ID-OD grind equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work very close tolerances utilizing various instruments, including air gage, OD indicating gaging, indicators, profilometers, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 3 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary This machinist will independently and safely set up and operate precision CNC ID-OD grind equipment. Essential Functions Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. Make tooling adjustments and program offsets as necessary. Ability to accurately inspect work very close tolerances utilizing various instruments, including air gage, OD indicating gaging, indicators, profilometers, micrometers, height stands and verniers. Perform daily TPM responsibilities. Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. Actively participate in cross-training, cost savings and team activities to improve processes. Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies Technical capacity Problem-solving / analysis Initiative Results-driven Experience and Education Minimum of 3 years of aerospace CNC machining experience is required. High school diploma or equivalent required. Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The CMM Programmer will develop, validate and operate programs for coordinate measuring machines (CMMs). Essential Functions • Utilize CMM software to create and validate CMM programs for both final and in-process inspection and measurement of complex finished product., • Operate CMM to prove out programs and as needed, to support production., • Maintain good housekeeping practices in work area and on machines. Comply with all company safety rules and regulations. Wear necessary personal protective equipment, as required., • Actively participate in cross-training, cost savings and team activities to improve processes., • Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies • Technical capacity, • Problem-solving / analysis, • Initiative, • Results-driven Experience and Education • Minimum of 5 years of aerospace CMM Programming experience is required., • PDMIS and/or Quindos experience a plus, • High school diploma or equivalent required., • Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $60000 - $100000 / year Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Minorities/Females/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary Support manufacturing by inspecting products and processes to meet quality and scheduled goals of the company. Essential Functions · Perform inspection of product. · Work in accordance with inspection sheets. · Participate in root cause corrective action investigations. · Learn and develop hands-on proficiency with inspection processes utilized by the company. · Follow written and verbal instructions, engineering drawings or sketches. · Prepare inspection reports and document non-conformances. · Participate in the operation of and compliance with all safety, hazardous material handling and disposal requirements in accordance with government regulations and company procedures. · Maintain a clean work environment in full compliance with all internal, customer and government regulations. Competencies · Technical capacity · Communication proficiency · Problem-solving / analysis · Decision-making · Initiative · Results-driven Experience and Education · Highly skilled in bench inspection. · Ability to work from sketches and use measuring instruments such as micrometers, calipers, height stands, indicators, shadow graph and CMM. · Knowledge of arithmetic involving decimals and fractions and its application to use sketches and measuring instruments. · Subject to complete vision exam per requirements of National Aerospace Standards (NAS) 410. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions -Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. -Make tooling adjustments and program offsets as necessary. -Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. -Perform daily TPM responsibilities. -Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. -Actively participate in cross-training, cost savings and team activities to improve processes. -Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies -Technical capacity -Problem-solving / analysis -Initiative -Results-driven Experience and Education -Minimum of 3 years of aerospace CNC machining experience is required. -High school diploma or equivalent required. -Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM’s such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company, founded in 1982, has grown through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions · Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product. · Make tooling adjustments and program offsets as necessary. · Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers. · Perform daily TPM responsibilities. · Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required. · Actively participate in cross-training, cost savings and team activities to improve processes. · Maintain appropriate tact and diplomacy in dealings with co-workers, team members and supervisors. Competencies · Technical capacity · Problem-solving / analysis · Initiative · Results-driven Experience and Education · Minimum of 5 years of aerospace CNC machining experience is required. · High school diploma or equivalent required. · Degree/certificate from vocation school or college program is a plus, but extensive experience may substitute for education. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company, founded in 1982, has grown through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success. Position Summary The CNC Machinist will independently and safely set up and operate 3, 4, and 5 axis equipment. Essential Functions • Read and understand process travelers, setup journals, tooling sheets and operation sheets to produce complex finished product., • Make tooling adjustments and program offsets as necessary., • Ability to accurately inspect work utilizing various instruments, including OD & ID indicating gaging, indicators, micrometers, height stands and verniers., • Perform daily TPM responsibilities., • Maintain good housekeeping practices on machines and in work area. Comply with all company and safety rules and regulations. Wear necessary personal protective equipment as required., • Actively participate in cross-training, cost savings and team activities to improve processes., • Technical capacity, • Problem-solving / analysis, • Initiative, • Minimum of 5 years of aerospace CNC machining experience is required., • High school diploma or equivalent required. This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary Support manufacturing by inspecting products and processes to meet quality and scheduled goals of the company. Essential Functions · Perform inspection of product. · Work in accordance with inspection sheets. · Participate in root cause corrective action investigations. · Learn and develop hands-on proficiency with inspection processes utilized by the company. · Follow written and verbal instructions, engineering drawings or sketches. · Prepare inspection reports and document non-conformances. · Participate in the operation of and compliance with all safety, hazardous material handling and disposal requirements in accordance with government regulations and company procedures. · Maintain a clean work environment in full compliance with all internal, customer and government regulations. Competencies · Technical capacity · Communication proficiency · Problem-solving / analysis · Decision-making · Initiative · Results-driven Experience and Education · Highly skilled in bench inspection. · Ability to work from sketches and use measuring instruments such as micrometers, calipers, height stands, indicators, shadow graph and CMM. · Knowledge of arithmetic involving decimals and fractions and its application to use sketches and measuring instruments. · Subject to complete vision exam per requirements of National Aerospace Standards (NAS) 410. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary Support manufacturing by inspecting products and processes to meet quality and scheduled goals of the company. Essential Functions · Perform inspection of product. · Work in accordance with inspection sheets. · Participate in root cause corrective action investigations. · Learn and develop hands-on proficiency with inspection processes utilized by the company. · Follow written and verbal instructions, engineering drawings or sketches. · Prepare inspection reports and document non-conformances. · Participate in the operation of and compliance with all safety, hazardous material handling and disposal requirements in accordance with government regulations and company procedures. · Maintain a clean work environment in full compliance with all internal, customer and government regulations. Competencies · Technical capacity · Communication proficiency · Problem-solving / analysis · Decision-making · Initiative · Results-driven Experience and Education · Highly skilled in bench inspection. · Ability to work from sketches and use measuring instruments such as micrometers, calipers, height stands, indicators, shadow graph and CMM. · Knowledge of arithmetic involving decimals and fractions and its application to use sketches and measuring instruments. · Subject to complete vision exam per requirements of National Aerospace Standards (NAS) 410. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary Support manufacturing by inspecting products and processes to meet quality and scheduled goals of the company. Essential Functions · Perform inspection of product. · Work in accordance with inspection sheets. · Participate in root cause corrective action investigations. · Learn and develop hands-on proficiency with inspection processes utilized by the company. · Follow written and verbal instructions, engineering drawings or sketches. · Prepare inspection reports and document non-conformances. · Participate in the operation of and compliance with all safety, hazardous material handling and disposal requirements in accordance with government regulations and company procedures. · Maintain a clean work environment in full compliance with all internal, customer and government regulations. Competencies · Technical capacity · Communication proficiency · Problem-solving / analysis · Decision-making · Initiative · Results-driven Experience and Education · Highly skilled in bench inspection. · Ability to work from sketches and use measuring instruments such as micrometers, calipers, height stands, indicators, shadow graph and CMM. · Knowledge of arithmetic involving decimals and fractions and its application to use sketches and measuring instruments. · Subject to complete vision exam per requirements of National Aerospace Standards (NAS) 410. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job Description The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEMs such as Pratt & Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary Support manufacturing by inspecting products and processes to meet quality and scheduled goals of the company. Essential Functions · Perform inspection of product. · Work in accordance with inspection sheets. · Participate in root cause corrective action investigations. · Learn and develop hands-on proficiency with inspection processes utilized by the company. · Follow written and verbal instructions, engineering drawings or sketches. · Prepare inspection reports and document non-conformances. · Participate in the operation of and compliance with all safety, hazardous material handling and disposal requirements in accordance with government regulations and company procedures. · Maintain a clean work environment in full compliance with all internal, customer and government regulations. Competencies · Technical capacity · Communication proficiency · Problem-solving / analysis · Decision-making · Initiative · Results-driven Experience and Education · Highly skilled in bench inspection. · Ability to work from sketches and use measuring instruments such as micrometers, calipers, height stands, indicators, shadow graph and CMM. · Knowledge of arithmetic involving decimals and fractions and its application to use sketches and measuring instruments. · Subject to complete vision exam per requirements of National Aerospace Standards (NAS) 410. Supervisory Responsibility This position has no supervisory responsibilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Other Duties This job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties or responsibilities may change at any time with or without notice. Work Authorization US Person (Green Card Holder or United States Citizen) due to government contracts. Compensation $40000 - $100000 / year Compensation is paid hourly and may be adjusted based on level of experience, overtime and shift. Aero Gear is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Aero Gear will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact the EEO Coordinator at 860.688.0888. EOE/Vets/Disabled While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies. Aero Gear will not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Under limited supervision, independently coordinate and performs a variety of administrative and operational support duties affecting a complex department and/or the organization, which require high level skills and knowledge of departmental and organizational policies and procedures.Utilizes consid

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Patient Administrative Associate.Work where every moment matters.Every day, more than 40,000 Hartford HealthCare colleagues come to work with one thing in common: pride in what we do, knowing every moment matters here.We invite you to become part of Connecticut's most comprehensive healthcare networ

Administrative Office Assistant.This order is for an administrative support role at Insurance Healthcare administrative offices.Experience: 1-3 years experience in a general office support/administrative role.Requirements: High School Diploma or equivalent.

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Under limited supervision, independently coordinate and performs a variety of administrative and operational support duties affecting a complex department and/or the organization, which require high level skills and knowledge of departmental and organizational policies and procedures.Utilizes consid

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Patient Administrative Assistant - Float Team.Work where every moment matters.Every day, more than 40,000 Hartford HealthCare colleagues come to work with one thing in common: pride in what they do, knowing every moment matters here.We invite you to become part of Connecticut's most comprehensive he

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Element has an opportunity for an Administrative Assistant.The Administrative Assistant will act as the liaison between customers and estimation team to ensure a premium quoting and customer service experience.The primary objective is to ensure that our customers have a seamless experience and are s

Administrative/HR Assistant - Entry Level Management.Provide full administrative support to a Marketing Firm team of professionals, operational department personnel, and/or executives.Maintain and coordinate multiple calendars and schedules.Coordinate meetings - in-house, video conferencing, confere

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Town of Vernon Department: Data Processing Wage Range: $28.Compensation will be based on qualifications and experience) Hours: 35/week 4 day work week Monday 8:00am-4:00pm, Tuesday 8:00am-7:00pm, Wednesday 8:00am-5:00pm, Thursday 8:00am-4:30pm.Position Definition: Provides variety of complex adminis

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Customer Service Representative.Do your friends and co-workers refer to you as a people person? Have friends or people told you or suggested you go into sales? Do you enjoy working with people? Do you enjoy helping people solve problems by offering advice and consultation? Are you looking for a job