Trabajos optics en Louisville, KentuckyCrear alertas

Job Description Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $1B in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. This position will be assigned to 3rd shift. The shift is Wednesday - Friday from 5:45pm - 5:45am. Summary/Objective: To operate reel-to-reel or barrel plating equipment to produce the highest achievable quantity with a high degree of accuracy. Essential Functions/Responsibilities: • Set up and operate plating machines to coat metal products with gold, nickel, matte tin, or other metal to protect or product surfaces., • Immerse workpieces in liquid metal for specified times., • Knowledge of how to read assembly drawings and manufacture parts accordingly., • Ability to think critically and pay close attention to detail. Strong organizational skills.The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.Required Experience:, • At least One Year experience in a Manufacturing environment., • Experience working around or with chemicals is preferred., • Attention to detail and Organizational skills are required., • Lifting Requirements: Medium Work – Must be able to lift up to 50 pounds frequently., • Hazards and Atmospheric Conditions: Exposure to noise (required to wear protective gear), exposure to chemicals (required to wear safety glasses and other protective gear).Preferred Education:, • High school diploma or equivalent required., • Some technical education is desired.Training Required:, • On the job training as appropriate.

Job Description Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. Summary/Objective: The Technical Integration Lead will own technical delivery of complex signal integrity systems and processes by driving definition, clarity, risk closure, acceptance criteria, and operational readiness across engineering, operations, suppliers, and internal stakeholders. Essential Functions/Responsibilities: • Translate program goals into clear technical deliverables and integration plans., • Drive execution across electrical, mechanical, software, and operations stakeholders; proactively identify and resolve gaps early., • Aid in the definition and maintenance of acceptance criteria and validation evidence for delivered processes and systems (repeatability, calibration stance, data conventions, and operator readiness)., • Ensure alignment for system and process deliverables; examples include documentation packages, 3D models as needed, software readiness, and programming/API guides when applicable., • Identify long-lead items and sequence procurement and approvals to protect schedule; coordinate dependencies across sites and work centers., • Coordinate organizational readiness for deployment., • Facilitate recurring technical program reviews with status, risks, and decisions needed; ensure actions have clear owners and due dates., • Partner with engineering leaders to improve execution patterns, templates, and standards for repeatable delivery across programs. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience: • Engineering background with demonstrated ownership of technical delivery across cross-functional teams., • Experience delivering complex systems and processes that span business segments., • Comfort defining requirements, acceptance criteria, and validation evidence; ability to drive closure on technical decisions., • Strong written and verbal communication skills; able to lead technical reviews and coordinate stakeholders without relying on hierarchy., • Experience in a high-speed electrical design and validation environment is strongly preferred. Preferred Experience: • Familiarity with SI principles, test equipment, and associated automation/analysis workflows., • Experience working with external suppliers on integrated systems and translating requirements into deliverables and documentation., • Working knowledge of data traceability and reporting practices; comfort standardizing templates and playbooks., • Experience supporting deployment to multiple sites and scaling processes for repeatable execution. Preferred Education: • BS in Electrical/Computer Engineering or related field

Job Description Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. Summary/Objective: The Process Engineer evaluates existing processes and configures manufacturing systems to reduce cost, improve sustainability, improve Quality, and develop best practices within the production process. The focus of the Process Engineer’s work is on maintaining reliable and safe manufacturing systems while improving production rates, efficiency, yields, costs, and changeovers. Essential Functions/Responsibilities: • Lead and execute experiments to identify key process variables using DOE type methodologies or other analytical methods., • Develop standard manufacturing best practices, parameters, process windows, and work instructions that improve the Samtec assembly process., • Use Six Sigma DMAIC process to determine root cause/solutions to process challenges., • Use statistical methods to conduct process capability studies to determine if the process is meeting key process requirements., • Develop process criteria to determine if cable assembly design and processes are ready for full volume production., • Provide general guidance, direction, and support to other engineering and operations teams that improve the assembly process., • Collect and interpret data from other technical and operating staff involved., • Direct and track yield investigations from initial discovery to root cause failure analysis., • Report yield results to cross-functional teams with varying knowledge base., • Develop tools, methods, and resources to ensure higher yields., • Perform engineering calculations applying the principles of physics and mathematics for process or equipment, including conceptual, scheme, and detail design., • Provide technical inputs for incident investigation considering an integral perspective (manpower, method, machines, materials, and measurement), documenting problem, root cause analysis and corrective action., • Develop/research new manufacturing methods that help advance the assembly process long -term. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required/Preferred Experience: • 5+ Years’ Experience in Process Engineering, development and manufacturing or complex assemblies., • Strong computer skills. Proficient in MS Office applications (PowerPoint, Excel, Word, Outlook), • Strong analytical and problem-solving skills, creative mindset., • Strong verbal and written communication skills to interact effectively with cross functional groups, • Experience in data analysis (Minitab and/or JMP are ideal)., • Engineering Design Software: SolidWorks, AutoCAD, etc. Preferred Education: • B.S. or B.A. in Engineering (Industrial, Manufacturing, Mechanical, etc.) required., • Technical or engineering experience can substitute for preferred education, • Six Sigma or Problem Solving background is highly desirable., • IPC Certification is desired

Job DescriptionMaterials Engineer • The Materials Scientist will be responsible for developing innovative solutions using various materials sets to support our GCT technologies., • Our client is seeking a highly motivated and creative individual with a strong scientific background and hands-on experience in metallurgy, thick film pastes, and sintering for implementing such pastes., • The person in this role will be responsible for developing and testing new formulations as well as devising application-specific test vehicles to validate that key requirements are met., • In addition, this candidate will be responsible for performing research to design innovative formulation concepts in-line with customer’s requirements for sintering pastes, run tests and studies.GROW WITH US: Our client is a global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board,High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. • Location: New Albany, IN, • Salary Range: $85,000 - $120,000. Based on experience and educationRole & Responsibilities, • Develop thorough understanding of paste materials, customer requirements, and support our R&D programs in developing new products to create profitable growth for Samtec’s Glass Core Technology business platform., • Develop new material formulations and support various R&D projects, run experiments, and evaluate results., • Contribute to the generation of patents., • Contribute to the evaluation of competitor landscape., • Work independently on the design, execution, and interpretation of experimental results., • Maintain accurate and timely records of experimental designs, assay development, experimental results, and data analysis., • Support strategy for optimization of material development as needed., • Following up on issues impacting product (e.g., deviation, SPC, etc.)., • Optimizing and testing processes., • Monitoring, analyzing, and addressing SPC issues., • Proven time management, organization, and prioritization skills., • Proven ability to communicate and present effectively. Required Skills, • 5 - 10 years of experience in an appropriate scientific and technical discipline or electronic packaging depending on education level., • Strong analytical skills; ability to analyze, troubleshoot and overcome technical hurdles independently and methodically with minimal guidance., • Understanding of Design of Experiments methodologies, and experience analyzing data using statistical analysis tools., • Detail-oriented with good time management skills., • Ability to stay proactive and cooperative working in a small team environment., • Strong presentation and written and verbal communication skills., • Effective computer skills in Microsoft Office suite and Outlook are preferred., • Ability to apply fundamental theories in real engineering problem solving., • Hands-on experience in sintering technologies and formulation., • Fundamental understanding of standard metrology, inspection (including 3D X-Ray), and failure analysis methods and their applications., • Demonstrated experience with continuous improvement in yield, throughput, and cost reduction, preferably in a lean manufacturing environment., • Be detail-oriented and able to work with minimal supervision., • Be a highly-motivated, team-player with a positive attitude who is also excited about learning new skills and assisting with various projects and assignments as necessary., • Working knowledge and understanding of, MSDS, lock-out/tag-out, and OSHA requirements., • Hands-on approach to development work and technical problem solving.Required Education, • Bachelors of Science in Chemistry, Metallurgy, or Materials Science. 10+ years experience., • PhD in Chemistry, Metallurgy or Materials Science with 3-5 years of experience. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionFounded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. Senior Product Design Engineer Location: New Albany, IN (Preferred) Also open to Harrisburg, PA; Columbia, SC; or remote/hybrid arrangements based on experience and business needs. Design the Next Generation of Interconnect Solutions Are you an engineer who thrives on solving complex technical challenges and bringing innovative products from concept to reality? We are seeking a highly experienced Product Design Engineer to lead the development of advanced interconnect solutions that power cutting-edge technologies across high-speed data, power delivery, cable systems, and next-generation electronic platforms. This is an opportunity to influence product strategy, drive technical innovation, and collaborate with world-class engineering, manufacturing, and commercial teams. In this role, you'll own critical design decisions, apply advanced engineering principles, and work directly with customers, sales, manufacturing, and technology experts to develop products that create competitive advantage in rapidly evolving markets. If you enjoy turning challenging technical problems into manufacturable solutions and seeing your designs move from concept to production, we'd like to talk with you. What You'll Do • Lead the design and development of innovative interconnect products from concept through production launch., • Drive technical solutions for connectors, cable assemblies, high-speed systems, power products, and emerging technologies., • Partner with Marketing and Sales to evaluate new opportunities and translate customer needs into engineering solutions., • Collaborate with manufacturing, quality, test, process engineering, suppliers, and other technical experts to ensure successful product commercialization., • Perform design analysis, modeling, validation, and troubleshooting to optimize product performance, reliability, and manufacturability., • Influence product architecture, design standards, and engineering best practices., • Solve complex technical challenges during product development and production support activities., • Contribute to continuous improvement initiatives that enhance product quality, performance, and cost competitiveness. Why This Role Appeals to Experienced Engineers • Significant influence on product design and technical direction., • Exposure to a broad portfolio of advanced interconnect technologies., • Opportunity to work on challenging high-speed, power, and electromechanical applications., • Direct collaboration with cross-functional teams throughout the entire product lifecycle., • Ability to see your designs move from concept to production and customer deployment., • Opportunity to mentor engineers and contribute to engineering excellence. What We're Looking For • 7–10+ years of experience designing and developing interconnect, electromechanical, connector, or cable products., • Strong CAD design experience using SolidWorks, AutoCAD, or equivalent platforms., • Proven track record of bringing products from concept through production., • Ability to manage multiple technical projects while balancing innovation, performance, cost, and manufacturability., • Excellent communication, collaboration, and problem-solving skills. Preferred Qualifications • High-speed connector design and development experience., • Signal integrity, power integrity, or high-speed system design knowledge., • Experience with simulation and analysis tools including FEA, CFD, thermal modeling, or similar technologies., • Experience working closely with manufacturing processes and production environments. Education Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.

Job Description Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. Summary/Objective: The Plating Laboratory Technician is responsible for the monitoring, maintenance, and control of all plating baths (GCT plating baths are included). Other laboratory projects and analyses may be necessary, as defined by the lab supervisor. Essential Functions/ Responsibilities: • Work with integrity in a team environment to support Electroplating Production and GCT Production., • Perform various analysis procedures to monitor the plating and GCT baths, and water treatment systems in accordance with written procedures., • Maintain the Plating baths by making bath additions and performing necessary bath changes promptly, based on tests performed or guidance from a supervisor., • Perform post-plating analysis: Ionic contamination analysis, porosity analysis, and gold usage analysis., • Work on various plating projects, including the maintenance and calibration of lab equipment., • Troubleshoot line problems and analytical equipment issues., • Maintain a clean and safe working environment., • The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities., • Additional requirements for this position may be needed based on the facility in which this is located. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.” Requirements: • Physical Requirements: Ability to stand, lift, and walk on a continual basis. Must be able to work with heavy drums of chemicals with a drum dolly., • Hazards and Atmospheric Conditions: Must be willing to adhere to all department safety rules and regulations in a chemical environment., • High school diploma or GED, • Must be a self-starter with strong teamwork skills and have a high attention to detail., • Must be able to work independently and in a team environment., • Strong analytical skills, excellent communication skills (verbal and written), proficiency with system applications, a high level of analytical aptitude, and problem-solving skills are required. Preferred Experience and Education: • 2-Year or 4-year degree in Chemistry, Engineering, and/or a Technical or Science-related Degree, • Experience working in a chemical laboratory., • Experience in the operation and maintenance of analytical equipment., • Electroplating experience

Want to bring the "care" back to the vision care industry? We're looking for charismatic types who are ready to be the heart of our brand. Whether it's a friendly voice over the phone, or a welcoming smile when a patient walks into your store, we need individuals who are passionate about helping customers look great and see great. Pay Class: Part Time Pay Rate: $12.50- 14/hr The Role: A Visionworks OD Coordinator is the very face of our Exam Practice and is dedicated to ensuring the best possible journey for every patient. The OD Coordinator assists with the training and scheduling of OD Techs. This person is trained and knowledgeable about eye health and preliminary testing, optics, our products/services and managed vision care. The OD Coordinator guides the patient through the first steps of the Visionworks experience ensuring their eye exam needs are met in a simple, human and bold way. • Maintain complete and accurate patient records before conducting preliminary testing., • Introduce patient to OD and provide OD with important patient information., • Transition patient from doctor to sales floor and provide associates necessary information to educate and recommend products and services that meet their eye care needs., • Execute day-to-day operational activities to support the store's exam lane maintenance and patient experience goals including: restocking inventory, cleaning equipment, and answering phones to meet additional patient needs., • Count the Optometrist's daily revenue and prepare for deposit., • Prepare the Technician work schedules to meet patient/Doctor demand. Qualifications: Related customer or patient experience preferred, but not necessary. HS diploma, GED or equivalent related job experience. Licensed OD Techs will have/maintain a State Opticians License What We Offer! At Visionworks, we offer a generous, competitive benefits package (for our part timers, too!) and exclusive employee discounts including but not limited to Vision Coverage, Paid Parental Leave, Bereavement Leave, 401 (k) Savings Plan, Paid Time off, Milestone anniversary awards, Medical, Dental for Full Timers, and more! Everyone has a story that makes them who they are. At Visionworks, we're looking for charismatic people who can lead authentically and with their own unique voice. We are actively committed to fostering an environment where all are seen and heard equally as we embrace Diversity, Equity and Inclusion (DE&I). VSP Vision is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to age, gender, race, color, religion, sex, national origin, disability or protected veteran status. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Compensation range for the roles is listed above. Applicable salary ranges may differ across markets. Actual pay will be determined based on experience and other job-related factors permitted by law. As a part of the compensation package, this role may include eligible bonuses, equity, and commissions.

Job DescriptionFounded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. Location: Louisville Metro Area, Kentucky At Samtec, we are pushing the boundaries of signal integrity, RF performance, and interconnect technology. As a privately held global technology leader with over $1 billion in annual sales and operations spanning more than 40 locations worldwide, we develop innovative interconnect solutions that enable next-generation communications, aerospace, defense, data infrastructure, medical, and industrial applications. We are seeking an experienced RF Engineering Manager to lead a team of talented engineers responsible for developing advanced RF and microwave interconnect products. This is an opportunity to influence technology strategy, guide the development of breakthrough solutions, and build a high-performing engineering organization focused on solving complex challenges at frequencies exceeding 100 GHz. If you are passionate about RF design, mentoring engineers, and driving innovation from concept through commercialization, we invite you to join our team. Why This Opportunity Stands Out • Lead the development of cutting-edge RF and microwave interconnect technologies., • Influence product and technology roadmaps that drive future business growth., • Work with highly skilled multidisciplinary teams across engineering, manufacturing, quality, and marketing., • Solve challenging signal integrity and electromagnetic performance problems., • Build and develop a world-class RF engineering team., • Make a visible impact on products used in some of the world's most demanding applications. What You'll Do Technical Leadership • Guide the architecture, design, and development of advanced RF and microwave interconnect products., • Lead technical reviews and provide strategic direction on complex design challenges., • Drive innovation in high-frequency interconnect technologies and identify opportunities for next-generation product development., • Evaluate emerging technologies and sponsor development efforts to close technology gaps. Product Development & Execution • Review and prioritize new product opportunities with business and technical stakeholders., • Oversee multiple development programs from concept through production launch., • Ensure projects meet performance, reliability, manufacturability, schedule, and cost objectives., • Partner closely with Marketing, Operations, Quality, Manufacturing, and Project Management teams. Business Impact • Establish meaningful engineering metrics and drive continuous improvement initiatives., • Provide technical insight to support strategic planning and product investment decisions., • Ensure engineering resources are aligned with organizational priorities and customer needs. What We're Looking For Required Qualifications • 7+ years of RF/Microwave design experience directed at coaxial connectors or coaxial components., • Demonstrated success leading and developing engineering teams., • Strong hands-on expertise troubleshooting and optimizing mmWave interconnect products operating above 40 GHz., • Deep understanding of S-parameters, TDR measurements, signal integrity, and RF performance analysis., • Strong mechanical aptitude including GD&T, blueprint interpretation, and tolerance analysis., • Ability to effectively balance technical leadership with project execution., • Excellent communication and cross-functional collaboration skills. Preferred Qualifications • Experience with electromagnetic simulation and modeling tools., • Expertise operating and interpreting vector network analyzer measurements., • Knowledge of precision machining processes and process capability methodologies., • Experience leading complex, multidisciplinary product development programs., • Strong background in high-frequency connector, cable, or interconnect design. Education • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related engineering discipline required., • Master's degree in Engineering, Engineering Management, or related field preferred. Join Us This role offers a unique opportunity to combine deep technical leadership with people leadership while shaping the future of RF interconnect technology. You'll work alongside talented engineers, influence strategic technology decisions, and help deliver innovative solutions to customers around the world.

Job Description Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. Summary/Objective: Serve as the Maintenance Technician Supervisor, and Lead Technician for all shifts and all processes in connector manufacturing. Essential Functions/ Responsibilities: • Responsible for the general safety of all Automation/Hand Fill equipment., • Coordinate schedules for technical group to ensure all manufacturing times have adequate Technician coverage., • Responsible for management of staff including discipline, performance evaluations, etc., • Responsible for timely procurement of necessary tools, supplies, and equipment required for the technician staff to perform their jobs effectively and efficiently., • Coordinate projects on existing machinery to improve quality, throughput, and safety., • Responsible for Preventative Maintenance program for all manufacturing process related equipment., • Work with engineering, quality, and customer service departments to investigate issues related to automated manufacturing., • Interface with engineering on tooling/machinery for new projects and products associated with automated manufacturing., • Could potentially involve handling hazardous materials. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.” Required Experience: • 5+ Years’ Experience in working as a Technician on Automated Machines in a Manufacturing environment., • Engineering Degree, • Must have 20/40 correctable vision., • Must be capable of lifting 70 lbs. from floor to waist and have full use of all digits., • Capable of standing and/or sitting for more than 90 minutes straight and not suffering from any sensory deprivation and/or paralysis of the limbs. Education: • High School diploma or equivalent is preferred., • Some Technical education or certification as a Machinist or Journeyman Toolmaker.

Job DescriptionSenior Device Management EngineerTHIS ROLE IS LOCATED ON-SITE IN NEW ALBANY, INAbout Samtec Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. About the Role We’re looking for a Senior Device Management Engineer to own and evolve our endpoint management ecosystem across a diverse device fleet. You’ll be one of the subject matter experts for device lifecycle, security tooling, and automation — keeping our endpoints healthy, secure, and consistently managed at scale. Responsibilities • Design, maintain, and optimize endpoint management solutions across Windows and macOS environments using cloud-based and on-premises management platforms, • Manage software deployment, patching, and inventory through enterprise deployment and asset management tooling, • Administer endpoint security and application control policies — including allowlisting, ringfencing, and storage controls — and respond to policy exceptions, • Develop and maintain PowerShell scripts to automate device provisioning, compliance remediation, and reporting workflows, • Own the full device lifecycle: enrollment, configuration baseline, patching cadence, and retirement, • Maintain co-management configurations bridging on-premises and cloud-native management; optimize workload assignments as the environment matures, • Build and enforce compliance policies, conditional access baselines, and security configurations aligned with organizational standards, • Troubleshoot complex endpoint issues across hardware, OS, and management tooling layers, • Document runbooks, configurations, and processes; train and mentor junior IT staffRequirements, • 5+ years of hands-on experience in endpoint/device management roles, • Deep expertise with cloud-based platforms and on-premises configuration management (co-management experience strongly preferred), • Experience managing macOS devices with an enterprise Mac management platform, • Hands-on experience with endpoint security and application control solutions, • Proficiency in PowerShell scripting for automation and endpoint management tasks, • Experience with enterprise software deployment and remote management tooling, • Solid understanding of patch management strategy and ring-based deployment, • Familiarity with cloud identity, Conditional Access, and modern device identity concepts, • Strong troubleshooting skills across Windows 10/11 and macOS environmentsNice to Have, • Relevant Microsoft or platform-specific certifications, • Understanding of zero-trust network access concepts as they relate to endpoints, • Exposure to vulnerability management and endpoint detection platforms, • Experience in manufacturing or enterprise environments with mixed device fleets

Job Description Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $1B in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. JOB DESCRIPTION Summary/Objective: The stamping technician is responsible for the daily set-up, running and maintenance repair of Samtec’s high speed, progressive stamping dies in a fast-moving production environment. Essential Functions/ Responsibilities: • Must be a self-starter and a good time manager who displays a sense of urgency., • Use experience and training to identify tooling wear and design flaws for optimal quality, performance, and uptime., • Comfortable working with tolerances of .0003” or even less in some cases., • Comfortable using precision gauges and understand toolmaker principles for precision measurements., • Willing and eager to learn new technical concepts and maintenance methods., • Must be able to troubleshoot, problem solve and perform multiple tasks independently in a fast-paced manufacturing environment., • Must keep a clean and organized work environment., • Exhibit accountability to your teammates and Samtec., • Effectively communicate technical information to the team when performing work on equipment., • Flexibility is important for occasional OT and schedule moves to cover business needs., • The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. * Required Experience: • Minimum 3 years experience in manufacturing or machine shop environment. Connector manufacturing experience is preferred., • Excellent problem solving, investigation skills, detail oriented., • Must possess good communication skills – written and verbal., • Experience in engineering design software (SolidWorks, AutoCAD, etc.) a plus., • Must be able to use Microsoft Software (Outlook, Excel, Word, Access). You do not need to be an expert., • Proficient in basic shop math including the occasional use of Algebra, Geometry and trigonometry for angle calculations and SINE bar stack-ups., • Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs., • Lifting Requirements: Must be able to lift up to 50 pounds from floor to waist., • Hazards and Atmospheric Conditions: Must be willing to adhere to department safety rules and regulations. May be exposed to noise (required to wear protective gear). May be exposed to Hazardous Materials & Chemicals (required to wear safety glasses and other protective gear). Preferred Education: • High School diploma or equivalent is required., • Journeyman certificate is preferred, but not required., • College education is preferred (not mandatory). Training required: • On the job training as appropriate

Materials and Process Industrialization Engineer (Experienced Professional).Build a Career That Matters with One of the World's Most Respected Employers!.A vibrant location, engaged employees, and lots of growth opportunities await those who join the Louisville team! Situated on the outskirts of Lou

Ledcor Technical Services has been building and servicing communication networks for customers across North America since 1979.Utilizing our broad expertise and experience, we customize solutions to best meet our client's needs.We act as a key partner for our clients by delivering exceptional qualit

At Echo Electric, a brand owned by Sonepar, we are a leader in electrical distribution.Echo Electric represents over $1.Illinois, Indiana, Iowa, Kansas, Kentucky, Missouri, Ohio, Nebraska, and Southern South Dakota.As part of Sonepar, the worldwide leader in electrical distribution, we have a global

Global Process Safety Engineer.Trinseo is a different kind of global materials company - at the intersection of people, technology, and customers.We are a world leader in the production of plastics and latex binders.Our culture is built on passion and innovation.A career at Trinseo presents a unique

Essential Duties And Responsibilities.Reports for scheduled work regularly and on time.Notifies supervisor as soon as possible regarding the need and expected duration of any absence.Ensures that quality customer service is provided to all customers, donors and employees.Follows all customer service

DHL - 800 Patrol Road, Ste 200 - Responsibilities: Move stock between warehouse areas; Load/unload shipments of various sizes; Operate stand-up/sit-down/electric pallet jacks; Maintain inventory accuracy and records; Comply with OSHA/MSDS standards.

Parker is an Equal Opportunity and Affirmative Action Employer.Parker is committed to ensuring equal employment opportunities for all job applicants and employees.Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, nat

OnTrac - 7645 National Turnpike, #190 - Responsibilities: Unload trailers and sort packages by ZIP code; Load trucks for deliveries; Maintain safety and operate in a safe manner; Be a team player and collaborate with others; Maintain productivity in a fast-paced environment.

Home Depot - - Responsibilities: Load and unload trucks; Move material within the facility; Operate forklifts, hoists, motorized conveyors, or other material handling equipment; Sort, staging, and transport products.

Grainger - - Responsibilities: Safely complete inbound and outbound warehouse tasks including unloading, sorting, labeling, replenishing, auditing, picking, and packing products; Ensure products are shipped accurately to meet quality and delivery speed expectations; Operate computerized scanning eq

The Job Center - - Responsibilities: Operate forklift to move, locate, relocate, stack, and count products; Unload inbound shipments safely and move to locations; Stack and store products in designated areas; Pull and prepare products for shipment; Conduct cycle counts and assist inventory control.

Responsibilities: Loading and unloading; Selecting and palletizing; Auditing and repacking; Cleaning and housekeeping; Assisting site leadership with duties.

The Assembler Packager is responsible for performing quality inspection and packaging of goods.Verify product meets specifications including dimensions, perforations, construction, etc.Perform quality tests as directed by operator.Retrieve product from conveyor and package in boxes/bags.Palletize bo

Ferguson - - Responsibilities: Safely operate a stand-up forklift (order selector/cherry picker) to pull and prepare outbound customer orders; Build, wrap, sort, and transport pallets and packages; Use RF devices to sort, scan, and prepare orders; Accurately and timely receive, verify, stage and st

ProLogistix - - Responsibilities: Follow safety guidelines; Pick and pack products at pack stations; Use handheld scanners or onboard computers; Stand for an entire shift; Follow warehouse systems and processes.

The Job Center - - Responsibilities: Receiving, inspecting, and organizing incoming inventory; Operating material handling equipment, such as forklifts and pallet jacks; Assisting with the loading and unloading of trucks; Maintaining a clean and organized warehouse environment; Collaborating with t

Five Star Breaktime Solutions - 1635 Production Rd - Responsibilities: Accurately pick and assemble customer orders using warehouse management systems and handheld scanners; Inspect products for damage and dispose of defective items according to company procedures; Safely lift, carry, and move produ

OnTrac - 7645 National Turnpike - Responsibilities: Unload trailers and sort packages by zip codes; Load trucks for deliveries; Be a team player – everyone works together to get the job done; Safety is our first core value – adhere to safety protocols; Unload trailers and sort packages by zip co

Cintas Corporation - - Responsibilities: Load and unload soiled products onto designated areas or trucks; Load clean uniforms, floor mats and additional customer products onto trucks based on routes; Maintain cleanliness of work area and meet standards for quantity and quality of products loaded/un

Grainger - 8701 Minor Lane - Responsibilities: Complete inbound and outbound warehouse tasks including unloading, sorting, labeling, replenishing, auditing, and packing; Ensure accurate shipment of products to meet quality and delivery speed; Meet safety, quality, productivity, attendance, and overt

About the Role: Print Machine Operators are critical to driving output and maintaining premium product quality at our Louisville manufacturing facility.Working directly on the plant floor, you will be responsible for setting up, calibrating, and running digital printing machinery, managing ink and s

About Parker HVAC Filtration Division.Parker HVAC Filtration Division, a part of Parker Hannifin Corporation, is a global leader in clean air solutions.We specialize in the design and manufacture of high-performance air filtration products that improve indoor air quality and protect people, processe

If you are seeking an opportunity as an Assembler, Emerson has an exciting opportunity for you! Based in Louisville, KY, you will work in a great manufacturing environment and have good attention to detail to assemble high-quality products.In this Role, Your Responsibilities Will Be:.Work to maintai

The Machine Operator Ill role is responsible for advanced machine operation, troubleshooting, complete day by hour, first piece inspection, and scrap documentation.Advanced changeovers requiring multiple machine setups/tools.Read production orders to verify quality standards for quantities and label

Aerotek - - Responsibilities: Manufacture air filters to specifications; Assemble components with hand and power tools; Operate production equipment safely; Package finished products for shipment; Maintain cleanroom and safety standards.

About Parker HVAC Filtration Division.Parker HVAC Filtration Division, a part of Parker Hannifin Corporation, is a global leader in clean air solutions.We specialize in the design and manufacture of high-performance air filtration products that improve indoor air quality and protect people, processe

If you are seeking an opportunity as an Assembler, Emerson has an exciting opportunity for you! Based in Louisville, KY, you will work in a great manufacturing environment and have good attention to detail to assemble high-quality products.In this Role, Your Responsibilities Will Be:.Work to maintai

The Assembler Packager is responsible for performing quality inspection and packaging of goods.Verify product meets specifications including dimensions, perforations, construction, etc.Perform quality tests as directed by operator.Retrieve product from conveyor and package in boxes/bags.Palletize bo

About Parker HVAC Filtration Division.Parker HVAC Filtration Division, a part of Parker Hannifin Corporation, is a global leader in clean air solutions.We specialize in the design and manufacture of high-performance air filtration products that improve indoor air quality and protect people, processe

Brady Corporation - - Responsibilities: Perform quality inspection and packaging of goods; Verify product meets specifications including dimensions, perforations, construction, etc.Retrieve product from conveyor and package in boxes/bags; Palletize boxes/bags according to specification; Clean produ

If you are seeking an opportunity as an Assembler, Emerson has an exciting opportunity for you! Based in Louisville, KY, you will work in a great manufacturing environment and have good attention to detail to assemble high-quality products.In this Role, Your Responsibilities Will Be:.Work to maintai

Brady Corporation - - Responsibilities: Perform quality inspection and packaging of goods; Read and follow written directions; Lift up to 50 lbs repeatedly and stand for 100% of shift; Retrieve product from conveyor, package and label, palletize; Clean production area and perform minor equipment ma

Allegiance Staffing - - Responsibilities: Safely operate sit-down forklift in warehouse and production facility; Load/unload trucks and move materials; Perform inventory movements and use RF scanners/warehouse systems; Complete forklift safety inspections and maintain clean work areas; Assist produ

ProLogistix - - Responsibilities: Operate Reach Trucks and Cherry Pickers safely and efficiently; Pick, move, and store products in warehouse; Assist with picking, packing orders; Palletizing and shrink wrapping; Perform general warehouse duties.

ABF Freight - - Responsibilities: Load and unload trailers for the purpose of transporting a wide variety of cargo; Move cargo, drive a forklift or use a pallet jack or other freight handling equipment; Prepare wide varieties of freight for transit; Complete all required paperwork; Effectively oper

Johnson Controls - - Responsibilities: Assemble and inspect components on the production line to meet quality standards.