Welder jobs in Green Bay, WisconsinCrear alertas

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI Shift: 1st (6:00AM - 4:30PM Monday-Wednesday, 5:00AM - 3:30PM Thursday, 10 hours) Payrate range: $17.00-19.00 an hour Title: Loader Department(s): Loading Reports to: Loading Foreman General Purpose of the Job: Prep pipe for paint, load and unload the furnace, load, and unload the vault, stencil and load pipe on wagons. Summary of Major Responsibilities/Duties: * Prep pipe for paint * Load and unload furnace * Load and unload the vault * Stencil pipe * Load pipe on wagons to shipping/delivery * Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: * No prior experience or training * Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or dial form. Ability to deal with problems involving several concrete variables in standardized situations. Other Requirements/ Key Competencies: * Effective problem solvers * Team player * Self-Motivated * Attention to detail and can follow directions * Good verbal and written communication skills * Reliable Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) Physical Demands, Working Conditions and Work Environment:? Indicate how often the following physical demands are required to perform the Essential job Responsibilities. * C=Constantly F=Frequently O=Occasionally R=Rarely * Physical Demands * Standing C * Walking C * Sitting R * Lifting C * Carrying C * Pushing C * Pulling C * Climbing C * Balancing C * Stooping C * Kneeling O * Crouching O * Crawling O * Reaching C * Physical Strength * Handling C * Little Physical Effort – 10lbs or less C * Grasping C * Light Work – up to 20lbs C * Feeling O * Medium Work – up to 50lbs O * Talking C * Heavy Work – up to 100lbs O * Hearing C * Very Heavy Work– above 100lbs O * Repetitive Motions O * Eye/Hand/Foot Coordination C * Environmental Conditions * Extreme Cold O * Extreme Heat O * Temperature Changes C * Wet O * Humid O * Noise C * Vibration O * Hazards C * Atmospheric Conditions C WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___R___Welding Coat ___O___Respirator ___C___Other PPE’s (explain) Gloves Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc216408

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI Shift: 2nd (5 PM - 3:05 AM Monday-Wednesday, 4PM - 2:05AM Thursday, 10 hours) Payrate range: $17.00-19.00 an hour Title: Loader Department(s): Loading Reports to: Loading Forman General Purpose of the Job: Prep pipe for paint, load and unload the furnace, load, and unload the vault, stencil and load pipe on wagons. Summary of Major Responsibilities/Duties: * Prep pipe for paint * Load and unload furnace * Load and unload the vault * Stencil pipe * Load pipe on wagons to shipping/delivery * Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: * No prior experience or training * Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or dial form. Ability to deal with problems involving several concrete variables in standardized situations. Other Requirements/ Key Competencies: * Effective problem solvers * Team player * Self-Motivated * Attention to detail and can follow directions * Good verbal and written communication skills * Reliable Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) Physical Demands, Working Conditions and Work Environment:? Indicate how often the following physical demands are required to perform the Essential job Responsibilities. * C=Constantly F=Frequently O=Occasionally R=Rarely * Physical Demands * Standing C * Walking C * Sitting R * Lifting C * Carrying C * Pushing C * Pulling C * Climbing C * Balancing C * Stooping C * Kneeling O * Crouching O * Crawling O * Reaching C * Physical Strength * Handling C * Little Physical Effort – 10lbs or less C * Grasping C * Light Work – up to 20lbs C * Feeling O * Medium Work – up to 50lbs O * Talking C * Heavy Work – up to 100lbs O * Hearing C * Very Heavy Work– above 100lbs O * Repetitive Motions O * Eye/Hand/Foot Coordination C * Environmental Conditions * Extreme Cold O * Extreme Heat O * Temperature Changes C * Wet O * Humid O * Noise C * Vibration O * Hazards C * Atmospheric Conditions C WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___R___Welding Coat ___O___Respirator ___C___Other PPE’s (explain) Gloves Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc212595

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI After 500 working hours, benefits include: Health, Dental and Vision Shift: 1st (6:00AM - 4:30PM, Tuesday - Friday, 10 hours) Job description: Verifies and keeps records on incoming shipments, unloads and lay down of materials, inventory management, support of all receiving functions. Summary of Responsibilities/Duties: • Drive rough terrain forklift to unload and move materials, • Compare identifying information and counts, weighs, or measure items from incoming shipments to verify information against bills of lading invoices, orders, or other records., • Unpack and examine incoming shipments, rejecting damaged items, recording shortages and corresponds with shipper to rectify damages and shortages., • Properly routes items to appropriate department or yard location., • Read and understand certified metal technical records (CMTR’s) and input them into file system, • Communicate with vendors to acquire missing paperwork, • Input receipts on computer, • Order shop supplies and maintain consumable crib, • Computer proficiency in a variety of computer programs, keyboarding skills., • Ability to use Excel, Word, and Outlook, • Experience working with Infor CSI Software, • Effective problem solvers, • Team player, • Attention to detail, • Good verbal and written communication skills, • Reliable, • Self-Motivated, • Basic Office Equipment: e.g., computer, copier, fax, scanner, etc., • Hand tools (e.g., hammer, screwdriver), • Power tools (e.g., saws, welder, drill, grinders) Indicate how often the following physical demands are required to perform the Essential job Responsibilities. Physical Demands, Working Conditions and Work Environment: Indicate how often the following physical demands are required to perform the Essential job Responsibilities. * C=Constantly F=Frequently O=Occasionally R=Rarely * Physical Demands * Standing C * Walking C * Sitting R * Lifting F * Carrying F * Pushing C * Pulling C * Climbing O * Balancing O * Stooping O * Kneeling O * Crouching O * Crawling O * Reaching C * Physical Strength * Handling C * Little Physical Effort – 10lbs or less C * Grasping C * Light Work – up to 20lbs C * Feeling O * Medium Work – up to 50lbs F * Talking C * Heavy Work – up to 100lbs O * Hearing C * Very Heavy Work– above 100lbs R * Repetitive Motions F * Eye/Hand/Foot Coordination C * Environmental Conditions * Extreme Cold R * Extreme Heat O * Temperature Changes O * Wet C * Humid C * Noise F * Vibration F * Hazards C * Atmospheric Conditions C WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___R___Welding Coat ___R___Respirator ___C___Other PPE’s (explain) Gloves Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc198954

Job Description US Tech Force is seeking a Welder - Fabricator with either MIG or TIG welding experience. The ideal candidate will be responsible and dedicated with proven education and experience in welding. This position also requires the ability to work with minimal supervision all while possessing excellent time management skills. Welder Responsibilities: • Fit, fabricate, and weld handrails, frames, and other structural pieces according to customer specifications, • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations, • Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments, • Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding Wage: $18-$27+ Schedule: First AND Second Shift available Company DescriptionUS Tech Force...complete staffing solutions. Is a staffing company specializing in helping GREAT People find GREAT Jobs with GREAT companies! Serving All Industries - All Positions & All Levels. Most positions are Long-Term, Permanent, Contract-to-Hire, or Direct Hire Positions. We partner with 100's of companies within Northeast, WI, visit our website for a full list of available positions: . No Charge - Professional and Personalized Staffing/Employment Services -US Tech Force...complete staffing solutions. Is a staffing company specializing in helping GREAT People find GREAT Jobs with GREAT companies! Serving All Industries - All Positions & All Levels. Most positions are Long-Term, Permanent, Contract-to-Hire, or Direct Hire Positions. \r\n\r\n\r\n\r\nWe partner with 100's of companies within Northeast, WI, visit our website for a full list of available positions: Charge - Professional and Personalized Staffing/Employment Services -

Job Description Are you looking for a custom fabrication shop? Do you have custom project welding experience? This is for you! You will be working in a climate-controlled manufacturing environment to MIG welding structural materials and TIG weld aluminum and stainless materials for custom projects. Projects will be completed for variety of different industries including the energy distribution, heavy equipment, food grade production and transportation industries. You will be working from blueprints and drawings to fit and weld parts according to specifications. Projects include TIG welding, but previously TIG welding experience is not required Shift:1st & 2nd Shifts Requirements: • 1-2+ years of welding experience required, • Experience with welding aluminum and stainless steel preferred Climate controlled and well-lit facility offering state of the art ventilation in our fabrication shop. You will be working 1st shift hours from 6am-2:30pm, Monday to Friday, with 4X10 hour shifts also being an option. Why Work Here? Join a company that values quality and manufacturing efficiency, offering benefits and profit sharing. You'll be part of a team that serves a wide range of industries, including national defense, in a state-of-the-art manufacturing environment. Job Type & Location This is a Permanent position based out of Green Bay, WI. Pay and Benefits The pay range for this position is $22.00 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Green Bay,WI. Application Deadline This position is anticipated to close on Jan 12, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI Shift: 2nd (5:00 PM - 3:05 AM, Monday – Wednesday & 4 PM Thursday- 2:05 AM Friday, 10 hours) Title: Pipe Fabricator Department(s): Manufacturing Reports to: Foreman General Purpose of the Job: Tack together fitting and pipe according to the isometric drawings and producing high quality welds while gaining the knowledge and experience of a fabricator over the five-year apprenticeship. Summary of Major Responsibilities/Duties: * Follow the Apprenticeship training program and pass all the requirements within the set time frames. * Assemble pipe components by tacking them in place prior to welding. * Confirming squareness of all joints fit up. * Confirming configuration of all joints fit up. * Confirming pipe joints are aligned properly (taper bore if necessary). * Confirming pipe spool is built according to the isometric drawings (center to center or center to end dimensions). * Verify correct length, material, type, and grade of pipe and fittings prior to tacking. * Retrieve material and make sure they correspond with parts list. * Lifting pipe with crane to fit-up bench. * This job involves a variety of other jobs such as welding, cutting, grinding, measurement, and layout. * Weld joints. * Grind out temporary tacks. * Position pieces to be welded * Purges pipe to be welded. * Records filler rod heat numbers. * Identifies his own welds by etching a weld number next to the joint. * Inspects weld after and makes any corrections if needed. * Keep work area clean and organized to prevent slips and trips. * Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: To even be considered to take the apprenticeship test the following is required: * One year of technical schooling or one year of fab shop welding or at least two union welding classes (10-3-hour classes- 90% attendance required and based on instructors’ feedback) or one union class with the previously stated requirements and 10-3-hour sessions of personal weld time. * Ability to weld either a six-inch standard or two inch extra strong carbon steel pipe, done in the six-G position (45°ree; fixed jigs) in 3 hours or less. * Ability to Mig root with down-hill progression/flux-core fill and cap with up-hill progression (six-inch diameter). * Tig out with all passes being up-hill progression. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. * Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percent, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. * Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Other Requirements/ Key Competencies: * Needs to be GTAW certified on 2inch S-80 pipe in 6 G. * Certified on GMAW Root/FCAW Balance. * Team player * Attention to detail * Good verbal and written communication skills * Reliable * Self-Motivated * Mechanical ability and likes to work with their hands * Good work ethics * Pride in workmanship * Be able to use construction calculator * Willingness to learn * Has to be a hard worker and physically fit as this can be a very physically demanding job. Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) Physical Demands, Working Conditions and Work Environment:? Indicate how often the following physical demands are required to perform the Essential job Responsibilities. ? C=Constantly??????????F=Frequently???????? O=Occasionally??????????? R=Rarely (5-8 hrs/shift)???????(2-5 hrs/shift)??????(Up to 2 hrs. /shift)????(Does not exist as regular part of job) ? Physical Demands ? ? Environmental Conditions ? Standing ?C ? Extreme Cold (winter) ?O Walking ?F ? Extreme Heat (summer) ?O Sitting ?R ? Temperature Changes ?O Lifting ?F ? Wet ?R Carrying ?F ? Humid ?O Pushing ?O ? Noise ?C Pulling ?O ? Vibration ?F Climbing ?O ? Hazards ?O Balancing ?O ? Atmospheric Conditions ?O Stooping ?O ? Other (define): ? Kneeling ?O ? Flying debris? ?C Crouching ?O ? ? Crawling ?R ? ? ? Reaching ?O ? Physical Strength ? Handling ?F ? Little Physical Effort – 10lbs or less ?C Grasping ?F ? Light Work – up to 20lbs ?F Feeling ?F ? Medium Work – up to 50lbs ?F Talking ?F ? Heavy Work – up to 100lbs ?O Hearing ?C ? Very Heavy Work – above 100lbs ?R Repetitive Motions ?O ? ? ? Eye/Hand/Foot Coordination ?F ? ? ? WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___C___Welding Coat ___C___Respirator ___C___Other PPE’s (e.g., gloves, long pants, welding hood, and grinding shield) Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc204010

Job DescriptionSalary: $18-$28+/hour Duties/Responsibilities/Skills: * Utilize MIG and/or TIG for welding steel, stainless steel, and aluminum. * Finish parts (straighten, grind, polish, wipe down, etc.) per spec on print or leads instruction. * Read and interpret customer drawings. * Produce quality, error free parts with precision on customer specifications. * Review traveler/prints to determine what needs to be fabricated/welded. * Read blueprints, tape measure, and caliper. * Double check parts to spec before and after fabricating, then have another approved person check. * Be able to follow directions in a fast-paced environment while completing jobs in allotted time frames. * Have great communication skills and be detail oriented. Experience: • Can demonstrate welding/fabricating knowledge and skill Food grade polishing experience is a plus. * At least 1 year of blueprint reading (preferred) Physical Requirements: * Prolonged periods of standing and walking with frequent pulling, pushing, lifting, & bending. * Must be able to lift up to 50 pounds at times. * All personal protective equipment must be worn where necessary (i.e. safety glasses, shoes, etc.) Education: * High School or equivalent preferred Salary: * Starting at $18- $28/hour (based on knowledge and experience) Schedule: * 8-10 hour shifts * Monday-Friday * Daytime Benefits: * Medical, Dental, & Vision Insurance * Health Savings Account * 401k with Match * Company Paid Short-Term Disability & Life Insurance * Paid Time Off * Paid Holidays * Tuition Reimbursement * Boot & Safety Glass Reimbursement * Flexible Schedule * Monthly Company Lunches

Job Description SHIFT OPENING INFORMATION • PMs: Monday - Thursday 4/10s (3 or 4pm - 2 or 3:00am) includes 20% shift premium We appreciate your interest in joining our team! We pride ourselves on our manufacturing solutions and ownership culture, which combined, supports both the industries we serve and our local communities. Robinson is employee-owned and is driven by a dedicated team of skilled professionals that value trust, loyalty, teamwork, integrity, and accountability as the foundations of our organization. JOB OVERVIEW As a Production Welder/fabricator at Robinson, you will play a pivotal role in our manufacturing process, utilizing your expertise to fabricate high-quality metal components. Working within a dynamic team environment, you will be responsible for executing welding operations with precision and efficiency, ensuring that our products meet the highest standards of quality and durability. ROLE AND RESPONSIBILITIES • Perform various welding techniques, including MIG, TIG, and stick welding, to join metal components according to blueprints, drawings, and specifications., • Operate welding equipment and machinery safely and effectively, adhering to established procedures and safety protocols., • Conduct visual inspections of welded components to detect defects or irregularities and make necessary adjustments to ensure conformance to quality standards., • Collaborate with colleagues in the fabrication department to optimize workflow and achieve production targets within scheduled deadlines., • Maintain a clean and organized work environment, including routine maintenance of welding equipment and tools., • Communicate effectively with supervisors and team members to address any issues or concerns related to welding processes or product quality., • High school diploma or equivalent; additional technical certification or vocational training in welding preferred., • Proven experience as a welder in a manufacturing or fabrication environment, with proficiency in MIG, TIG, and stick welding techniques., • Strong understanding of welding principles, metallurgy, and material properties, with the ability to interpret blueprints, diagrams, and technical drawings., • Familiarity with welding equipment and tools, including welding machines, torches, grinders, and measuring instruments., • Excellent attention to detail and manual dexterity, with the ability to produce precise and consistent welds on a variety of metal materials., • Demonstrated ability to work effectively in a team environment, with strong communication and interpersonal skills., • Proficiency in operating additional welding processes such as flux-cored arc welding (FCAW) or gas tungsten arc welding (GTAW)., • Experience with welding various types of metals, including stainless steel, aluminum, and carbon steel. At Robinson, we value professionalism, expertise, and a dedication to craftsmanship. We offer a dynamic work environment where employees are empowered to excel and grow within their roles. Join us in our mission to deliver exceptional metal fabrication solutions while fostering a culture of collaboration, innovation, and employee satisfaction. Robinson is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Fabricator / Welder – Green Bay, WI (54304) Pay: $23 - $30 per hour Schedule: Full-Time | 1st Shift (8–10 hour days) The Opportunity We’re looking for a detail-driven Fabricator/Welder who takes pride in clean welds, precise cuts, and dependable results. You’ll be producing top-quality parts for commercial and industrial builds, working with stainless, aluminum, and mild steel. If you can read blueprints, set up your own work, and don’t need reminders about safety or standards, you’ll fit right in. What You’ll Be Doing • Read and follow blueprints and design specs with accuracy, • Perform MIG and TIG welding on various metals, • Operate fabrication tools like saws, presses, benders, and grinders, • Handle your own prep, fit-up, and finishing, • Meet deadlines without cutting corners on quality or safety, • 4+ years in fabrication or related trade (minimum 1 year welding preferred), • Strong blueprint reading and layout skills, • Confident with MIG/TIG, hand tools, and power equipment, • Comfortable grinding, cutting, and finishing metals, • Forklift or crane experience is a plus, • Can lift up to 100 lbs safely and handle physical work, • Reliable, self-motivated, and proud of your craftsmanship The Schedule Monday to Friday, 8 or 10-hour shifts Some overtime when things ramp up Location: On-site, Green Bay, WI 54304 Why It’s Worth It You won’t be treated like a number here. Bring your skills, reliability, and pride in your work, and you’ll have a place where your craftsmanship actually gets noticed. Company DescriptionWe offer top pay, full time, year long workWe offer top pay, full time, year long work

Job DescriptionSalary: $22-$28/hour Welder/Fabricator Duties/Responsibilities/Skills: Utilize TIG for welding steel, stainless steel, and aluminum. Finish parts (straighten, grind, polish, wipe down, etc.) per spec on print or leads instruction. Read and interpret customer drawings. Produce quality, error free parts with precision on customer specifications. Review traveler/prints to determine what needs to be fabricated/welded. Read blueprints, tape measure, and caliper. Double check parts to spec before and after fabricating, then have another approved person check. Be able to follow directions in a fast-paced environment while completing jobs in allotted time frames. Have great communication skills and be detail oriented. Experience: Must have welding/fabricating experience Food grade polishing experience is a plus. At least 5 year of blueprint reading (preferred) Physical Requirements: Prolonged periods of standing and walking with frequent pulling, pushing, lifting, & bending. Must be able to lift up to 50 pounds. All personal protective equipment must be worn where necessary (i.e. safety glasses, shoes, etc.) Education: Welding Degree/Certificate or equivalent preferred Schedule: 8 hour shifts Monday-Friday Daytime

Job Description This location is in Kaukauna, WI relocation, or daily commute required. Location: Kaukauna, WI Pay Range: $16.00 - $19.00 Shift: 2nd (5 PM - 3:05 AM, Monday- Thursday, 10 hours) Title: Grinder Department(s): Manufacturing Reports to: Foreman General Purpose of the Job: Clean up pipe and fitting ends by grinding to prepare it for fitting Summary of Major Responsibilities/Duties: * Prepare pipe ends by grinding * Prepare fittings by grinding * Unload fitting wagons and organize on floor by job number * Wheelabrate pipe * Blast fittings in blast cabinet * Group material and drawings and stacks on a cart(s). * Load and unload pipe on racks. * Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: * Less than high school education; or up to one-month related experience or training; or equivalent combination of education and experience. * Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondents. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of money and weight measurement, volume, and distance. * Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Other Requirements/ Key Competencies: * Tractor and Forklift certified * Team player * Attention to detail * Good verbal and written communication skills * Reliable * Mechanical ability and likes to work with their hands * Self-motivated * Willingness to learn * Has to be a hard worker and physically fit as this can be a very physically demanding job. Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) * Office equipment (e.g., computer, projector, copier) Physical Demands, Working Conditions and Work Environment:? Indicate how often the following physical demands are required to perform the Essential job Responsibilities. ? C=Constantly??????????F=Frequently???????? O=Occasionally??????????? R=Rarely (5-8 hrs/shift)???????(2-5 hrs/shift)????????(Up to 2 hrs. /shift)????????(Does not exist as regular part of job) ? Physical Demands ? ? Environmental Conditions ? Standing ?C ? Extreme Cold (winter) ?O Walking ?F ? Extreme Heat (summer) ?O Sitting ?R ? Temperature Changes ?O Lifting ?O ? Wet ?R Carrying ?O ? Humid ?O Pushing ?O ? Noise ?C Pulling ?O ? Vibration ?F Climbing ?O ? Hazards ?O Balancing ?O ? Atmospheric Conditions ?O Stooping ?O ? Other (define): ? Kneeling ?O ? Flying debris? ?C Crouching ?O ? ? Crawling ?O ? ? ? Reaching ?O ? Physical Strength ? Handling ?F ? Little Physical Effort – 10lbs or less ?F Grasping ?F ? Light Work – up to 20lbs ?F Feeling ?F ? Medium Work – up to 50lbs ?O Talking ?F ? Heavy Work – up to 100lbs ?O Hearing ?C ? Very Heavy Work – above 100lbs ?R Repetitive Motions ?F ? ? ? Eye/Hand/Foot Coordination ?F ? ? ? WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___C___Welding Coat ___C___Respirator ___C___Other PPE’s (e.g., gloves, long pants and grinding shield) Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc192854

Job Description Title: Painter Department(s): Blast and Paint Reports to: Blast and Paint Foreman Location: Kaukauna, WI General Purpose of the Job: Applies paint and various other coatings as specified by customer to fabricated metal piping, tanks, and other structures. Summary of Major Responsibilities/Duties: * Painting of pipe spools, structural steel, positioners, and machined parts * Ability to use both a dry mil gage and a wet mil gage * Clean used equipment well in order to keep maintenance time down * Ensure you have the materials necessary in the mixing area before starting * Ability to mix, thin and apply Alkyds, Latex, Zinc Rich, Epoxies (to include Ultra High Solids) and Urethane coatings * Dispose of excess materials in their proper areas * Ability to use an airless and conventional sprayer * Ability to be trained on a forklift, tug, overhead crane, and tractor * Maintain good organization of the shop floor * Performing other job-related duties as assigned. * Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: * High school diploma or general education degree (GED); or equivalent combination of education and/or one year experience and/or training. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. * Ability to calculate figures and amounts such as proportions, percent, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. * Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. * Ability to problem solve, and work independently Other Requirements/ Key Competencies: * Effective problem solvers * Team player * Attention to detail * Good verbal and written communication skills * Reliable * Mechanical ability * Self-motivated * Physical agility * Willingness to learn Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) * Office equipment (e.g., computer, projector, copier) Physical Demands, Working Conditions and Work Environment:? Indicate how often the following physical demands are required to perform the Essential job Responsibilities. ? C=Constantly??????????F=Frequently???????? O=Occasionally??????????? R=Rarely (5-8 hrs/shift)??????(2-5 hrs/shift)????????(Up to 2 hrs. /shift)???????(Does not exist as regular part of job) ? Physical Demands ? ? Environmental Conditions ? Standing ?C ? Extreme Cold (winter) ?O Walking ?C ? Extreme Heat (summer) ?C Sitting ?R ? Temperature Changes ?R Lifting ?F ? Wet ?R Carrying ?F ? Humid ?O Pushing ?O ? Noise ?C Pulling ?O ? Vibration ?C Climbing ?C ? Hazards ?C Balancing ?C ? Atmospheric Conditions ?C Stooping ?C ? Other (define): ? Kneeling ?C ? ????????????? ????????????? ????????????? ? Crouching ?O ? ????????????? ????????????? ????????????? ? Crawling ?O ? ? ? Reaching ?C ? Physical Strength ? Handling ?C ? Little Physical Effort – 10lbs or less ?O Grasping ?O ? Light Work – up to 20lbs ?F Feeling ?O ? Medium Work – up to 50lbs ?F Talking ?O ? Heavy Work – up to 100lbs ?R Hearing ?O ? Very Heavy Work – above 100lbs ?R Repetitive Motions ?C ? ? ? Eye/Hand/Foot Coordination ?C ? ? ? WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___R___Welding Coat ___C___Respirator ___C___Other PPE’s (e.g., gloves, warm clothing, rain gear) Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc200180

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI Payrate range: $16.00-19.00 an hour Shift: 1st (6:00AM - 4:30PM, Monday - Thursday, 10 hours) Job description: Prepare and handle material item to be prepped and assembled for positioners. Summary of Major Responsibilities/Duties: • At the beginning and end of shift, walk the yard and make a list of what is available for the shop to work on, • Follow the list provided by the supervisor as to what need to worked on and in what order it needs to be done, • Use sound judgement and forward thinking when the work schedule changes., • Prep all wagons for the blasters and painters, staying ahead of them so work continues to flow steadily, • Working directly with positioner department when wagons and trailer need to go directly to them, • Assemble paperwork packet for each wagon, pull prints and double check they are tracked properly, • Pull shop wagons back to the appropriate bay, • Prepping subassemblies for positioner (gearboxes, hydraulic cylingers, air headers, power cord, air pumps, ext.), • Building/Wiring new foot pedals (electrical experience in not required, on the job training will be provided), • Run the reclaim system 1-2 times a day depending on workflow, • Inspects wagons/trailers to ensure safety and proper loading for painters., • Maintain organization of prints and paperwork in order and separated, • Apprise supervisor when issues arise, • Blow/shovel snow off wagons and trailers before bringing them into the building, • Assembly of Positioners, • Delivery and pickup of parts, • Repairing gripper jaws., • Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor., • Other duties as assigned. Minimum Knowledge, Skills and Abilities Required: • High school diploma or general education degree (GED); or equivalent combination of education and experience., • Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Other Requirements/ Key Competencies: • Effective problem solvers, • Team player, • Attention to detail, • Reliable Mechanical ability * Self-Motivated Equipment Used: • Hand tools (e.g., hammer, screwdriver), • Power tools (e.g., saws, welder, drill, grinders) Vehicles (e.g., automobile, truck, tractor, lift) Physical Demands, Working Conditions and Work Environment: Indicate how often the following physical demands are required to perform the Essential job Responsibilities. Physical Demands, Working Conditions and Work Environment: Indicate how often the following physical demands are required to perform the Essential job Responsibilities. * C=Constantly F=Frequently O=Occasionally R=Rarely * Physical Demands * Standing C * Walking C * Sitting R * Lifting F * Carrying F * Pushing C * Pulling C * Climbing O * Balancing O * Stooping O * Kneeling O * Crouching O * Crawling O * Reaching C * Physical Strength * Handling C * Little Physical Effort – 10lbs or less C * Grasping C * Light Work – up to 20lbs C * Feeling O * Medium Work – up to 50lbs F * Talking C * Heavy Work – up to 100lbs O * Hearing C * Very Heavy Work– above 100lbs R * Repetitive Motions F * Eye/Hand/Foot Coordination C * Environmental Conditions * Extreme Cold R * Extreme Heat O * Temperature Changes O * Wet C * Humid C * Noise F * Vibration F * Hazards C * Atmospheric Conditions C WORK ENVIRONMENT Personal Protective Equipment Required: ___C___Steel Toe Work Boots ___C___Hearing Protection ___C___Safety Eyeglasses ___R___Welding Coat ___R___Respirator ___C___Other PPE’s (explain) Gloves Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc211736

Job Description This location is in Kaukauna, WI relocation, or daily commute required. Location: Kaukauna, WI Pay Range: Based on experience Shift: 1st (6:00AM-4:30PM, Monday- Thursday, 10 hours) Job Description: Prepares substrate surfaces on fabricated metal piping, tanks, and other structures for coating by pressure blasting. Summary of Major Responsibilities/Duties: * Abrasive blasting of pipe, structural steel, and machined parts * Masking/taping and capping of pipe spools * Light maintenance of blast equipment * Fill out necessary paperwork for each piece, making sure it stays with the material as it goes from blast to paint * Upkeep of helmet, cape, and belts as they are used * Keep finished material organized in the prep area * Ability to be trained on a forklift, tug, overhead crane, and tractor * Ability to apply common sense understanding to carry out instructions furnished in written or oral form. * Cleaning and maintenance of personal protective equipment (PPE’s). * Performing other job-related duties as assigned. * Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: * High school diploma or general education degree (GED); or equivalent combination of education and/or up to one-month experience and/or training. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine paperwork. * Ability to deal with problems involving several concrete variables in standardized situations. Other Requirements/ Key Competencies: * Effective problem solvers * Team player * Self-Motivated * Attention to detail and can follow directions * Good verbal and written communication skills * Reliable * Mechanical ability * Physical agility * Pride in workmanship Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) Work Environment: Personal Protective Equipment Required: (all but the boots will be provided to you at the facility) * Steel Toe Work Boots * Hearing Protection * Safety Eyeglasses * Welding Coat * Respirator (if needed) * Gloves Physical Demands, Working Conditions and Work Environment: Indicate how often the following physical demands are required to perform the Essential job Responsibilities. * C=Constantly F=Frequently O=Occasionally R=Rarely * Physical Demands * Standing C * Walking C * Sitting R * Lifting F * Carrying F * Pushing C * Pulling C * Climbing O * Balancing O * Stooping O * Kneeling O * Crouching O * Crawling O * Reaching C * Physical Strength * Handling C * Little Physical Effort – 10lbs or less C * Grasping C * Light Work – up to 20lbs C * Feeling O * Medium Work – up to 50lbs F * Talking C * Heavy Work – up to 100lbs O * Hearing C * Very Heavy Work– above 100lbs R * Repetitive Motions F * Eye/Hand/Foot Coordination C * Environmental Conditions * Extreme Cold R * Extreme Heat O * Temperature Changes O * Wet O * Humid C * Noise C * Vibration F * Hazards C * Atmospheric Conditions C Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc212332

Job DescriptionDescription: Are you the point person that people ask when they need something fixed? As a maintenance technician, you’ll be responsible for diagnosing, repairing, maintaining and improving all equipment and systems, which keeps our location running smoothly. Drexel is looking for our next rockstar that has a knack for fixing things and loves to work on machines! Come help us Supply Happiness! ABOUT THE ROLE Maintain and evaluate company equipment, including: Gas and diesel vehicles, tractor trailers, fork lifts, automated/semi-automated saws, carpentry power tools, wall panel/truss fabrication equipment, and other machinery. Perform skilled repair and maintenance operations, using equipment such as hand or power tools, hydraulic presses, diagnostic tools and fabrication equipment e.g. welder, plasma cutter etc. Assist in maintaining buildings including: mechanical, HVAC, and basic electrical systems. Proficient in electrical, mechanical, pneumatic, PLC’s, and hydraulic systems operations and controls Basic understanding of vehicle maintenance and operation of forklift, trailers and vehicles (gas and diesel) Test and maintain all systems, machinery and equipment to ensure that they continually operate and meet the recommended manufacturer intervals Installing and assembling machines and equipment Establish and maintain a preventative maintenance plan The capability to provide timely service to diagnose and remedy problems Work as a part of a team to ensure the job is completed quickly and efficiently A rockstar at communication YOUR PRIOR WORK EXPERIENCE Prior experience in electrical, industrial automation, and/or mechanical fields Experience in working with a variety of different equipment is a huge plus! It would be great if your experience encompasses these four things: Your background involves putting customers first You have been a HUGE contributor to the success of a team You are known to be the point person for product knowledge You are uniquely you and bring something to the table that no one else can. You have done some great things that don't necessarily fall into the career path above but that's what makes you cool! Tell us why you would be great for this job anyway! Are you able to fulfill all the requirements? We are sure you don't. You should apply anyway! We have the best training facilities and mentors anywhere. We can train you if you have the right personality. PM85 Requirements: PIff6b656b8d18-25405-38704760

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI After 500 working hours, benefits include: Health, Dental and Vision Shift: 1st (6:00AM - 4:30PM, Monday - Thursday, 10 hours) Job description: Prepare and handle material items to be blasted and/or painted. Summary of Major Responsibilities/Duties: * At the beginning and end of shift, walk the yard and make a list of what is available for the shop to work on * Follow the list provided by the supervisor as to what needs to be worked on and in what order it needs to be done * Use sound judgement and forward thinking when the work schedule changes. * Prep all wagons for the blasters, staying ahead of them so work continues to flow steadily * Working directly with loading department when wagons and trailer need to go directly to them * Assemble paperwork packet for each wagon, pull prints and double check they are tracked properly * Pull shop wagons back to the appropriate bay * Assist in directing other bays where to bring their spools/parts * Perform conductivity tests/dust tests/solvent cleaning when applicable * Run the reclaim system 1-2 times a day depending on workflow * Inspects wagons/trailers to ensure safety and proper loading for painters. * Maintain organization of prints and paperwork in order and separated * Apprise supervisor when issues arise * Blow/shovel snow off wagons and trailers before bringing them into the building * Conducts work safely and follow all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. * Other duties as assigned. Minimum Knowledge, Skills and Abilities Required: * High school diploma or general education degree (GED); or equivalent combination of education and experience. * Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Other Requirements/ Key Competencies: * Effective problem solvers * Team player * Attention to detail * Reliable * Mechanical ability * Self-Motivated Equipment Used: * Hand tools (e.g., hammer, screwdriver) * Power tools (e.g., saws, welder, drill, grinders) * Vehicles (e.g., automobile, truck, tractor, lift) * Physical Demands, Working Conditions and Work Environment: * Indicate how often the following physical demands are required to perform the Essential job Responsibilities. * . * C=Constantly F=Frequently O=Occasionally R=Rarely * Physical Demands * Standing C * Walking C * Sitting R * Lifting F * Carrying F * Pushing F * Pulling F * Climbing O * Balancing O * Stooping F * Kneeling F * Crouching O * Crawling O * Reaching C * Physical Strength * Handling C * Little Physical Effort – 10lbs or less C * Grasping C * Light Work – up to 20lbs C * Feeling O * Medium Work – up to 50lbs F * Talking C * Heavy Work – up to 100lbs O * Hearing C * Very Heavy Work– above 100lbs R * Repetitive Motions F * Eye/Hand/Foot Coordination C * Environmental Conditions * Extreme Cold R * Extreme Heat O * Temperature Changes O * Wet O * Humid C * Noise F * Vibration F * Hazards C * Atmospheric Conditions C * WORK ENVIRONMENT * Personal Protective Equipment Required: * ___C___Steel Toe Work Boots * ___C___Hearing Protection * ___C___Safety Eyeglasses * ___R___Welding Coat * ___R___Respirator * ___C___Other PPE’s (explain) Gloves Safety: All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. #hc196495

Trillium Staffing - JobID: 785878 [Fabricator] As a Welder Fabricator at Trillium Staffing, you'll: Interpret blueprints and technical drawings to determine welding requirements; Operate welding equipment to cut, join, and shape metal components; Inspect finished products to ensure structural integr

Aerotek - JobID: JP-005739517 [Fabricator] As a Fabricator at Aerotek, you'll: Perform cutting/drilling/assembling; Use a chop saw, read tape, and measure; Use hand tools/drills, drill presses, etc; Lift 50 lbs.

Join Our Team as a Press Brake Operator! Are you looking for a challenging role in the manufacturing industry? Do you have experience operating press brake machines and producing high-quality metal products? If so, American Custom Metal Fabricating, Inc.Press Brake Operator to join our team in Green

Trillium Staffing - JobID: 779620 [Production Operator / Machinist] As a CNC Operator at Trillium Staffing, you'll: Operate CNC machines to produce precision parts; Inspect finished products for quality control; Maintain equipment by performing regular maintenance; Troubleshoot any issues that arise

Shift Location: Green Bay, WI Type: Temp-to-Hire | Mon-Fri | Day Shift Only Continue your career as a Fabricator with a growing, employee-owned company! You will work in a clean, climate-controlled shop with full training provided.Why You Will Want This Job: - $20.Monday - Friday, no nights or weeke

Massman Companies' mission is the build the best running machines in the factory and in order to deliver on this for our customers, we have to have the best running team in our factory! We have an outstanding fabrication team at EDL Packaging and we are looking to add a hard working machinist! If yo

Trillium Staffing - JobID: 787179 [Production Operator / Machinist] As a CNC Machinist at Trillium Staffing, you'll: Be proficient in operating machinery; Perform precision machining tasks; Inspect finished products for quality assurance; Maintain equipment and tools; Follow safety protocols; Collab

Provides support for claims adjustment activities including administering claims payments, maintaining claim records, and providing counsel to claimants regarding coverage amount and benefit interpretation.Also monitors and controls backlog and workflow of claims, and ensures that claims are settled

LBM - JobID: R10351 [Assembly Line Worker / Production Worker] As an Assembler at U.LBM, you'll: Work with a team in a production setting, using hand and power tools; Lay out precut lumber onto the build tables; Ensure lumber and plates used are per drawings specifications; Verify dimensions of prec

Confirm vise is true to machine and review small basic weldment.Review set up sheet and problem solve any concerns.Understand basic programming and work with team if concerns.Understand basic vacuum tool training.Set up basic and advanced operations of machine centers.Use appropriate machining tools

LBM - JobID: R6895 [Assembly Line Worker / Production Worker] As a Truss Assembler at U.LBM, you'll: Place truss pieces, chords, webs, and plates in appropriate position; Hammer plates secure in advance of pressing operation; Assist in pushing or pulling trusses from table; Clean up work area on a r

Your hands-on work will help ensure precision, safety, and reliability on every project.Set up and operate CNC Mechanical Shears, Hydraulic Press Brakes, and Punch Presses.Operate spot-welding equipment.Read and interpret shop orders, drawings, and frame templates.Safely operate forklifts to move ma

Assemble parts/pieces/products to specification in preparation to ship completed product.Drill holes in aluminum product using electric, hand-held drill.Read and interpret customer provided and manufacturing blueprints, sketches and written instructions.Fit, mount, align, and adjust large to small a

Entry-Level Assembly Associate.Modern, clean, fully air-conditioned manufacturing environment.APC Components is a well-established manufacturer with over.We take pride in our people, our products, and our commitment to quality.As an entry-level Assembly Associate, you'll join a.This role is an excel

Aerotek - JobID: JP-005735503 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

To assist in the everyday pre-finishing duties, which include but are not limited to assist in paint or automation/expedition of product through paint line, assist in packaging functions of paint line, assist with safe assembly of corner products and operate manual spray booth as assigned, under dai

Machine Operations, Plant Production.Do you enjoy working hands-on, encountering daily challenges, and exceeding goals? Schreiber Foods is seeking manufacturing operators to produce a high-quality product in a timely fashion for our customers.With a focus on growth and impact, Schreiber Foods is the

The CNC Machinist is responsible for programming, setting up, and operating CNC milling and turning equipment to produce high-quality precision components from metal or plastic materials.This role ensures all parts meet customer specifications by following established machining processes, adhering t

LBM - JobID: R6701 [Assembly Line Worker / Production Worker] As a Door Assembler at U.LBM, you'll: Perform various door assembly functions; Build units according to specifications; Perform quality checks to ensure quality standards; Pull parts for ticket production, pick list and customer orders; U

At KI, we believe knowing our customers helps us serve them better.We understand that each customer has unique needs.So, we pride ourselves on helping our customers make smart furniture decisions by offering expert advice, design options and personalized solutions.Since 1941, we've positioned KI as

Cintas Corporation - JobID: 1336869800 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

Aerotek - JobID: JP-005747319 [Production Operator / Assembly Line Worker] As a Production Associate at Aerotek, you'll: Be responsible for pulling the order form to determine the required product for production; Pull the product from the warehouse and deliver it to the production floor; Perform wra

Trillium Staffing - JobID: 787178 [Production Operator / Machinist] As a Machine Operator at Trillium Staffing, you'll: Operate machines to produce parts according to specifications; Monitor machine operations to ensure quality and efficiency; Adjust machine settings as needed; Perform regular maint

Aerotek - JobID: JP-005739990 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines through various tasks ; Perform inspecting, trimming, testing, fixturing, assembling, and packaging products; Perform other duties as assigned

Location: On-Site - Green Bay, WI.Modern facility, fully air-conditioned, clean, and equipped with up-to-date CNC machinery.Join a well-established manufacturer with.Be part of a collaborative, team-oriented workplace that values energy, positivity, and continual improvement.Set up, operate, and mai

Location: On-Site - Green Bay, WI.Plant Environment: Modern facility, fully air-conditioned, clean, and equipped with up-to-date CNC machinery.Join a well-established manufacturer with 25+ years of own-brand product heritage.Comprehensive benefits including health, dental, vision, retirement (401k w

Join our team as an Assembly Operator responsible for safely operating machinery and tools while assembling outdoor power equipment.You'll work in a fast-paced, team environment with opportunities to grow and develop your skills.Apply to this opportunity in Brillion, WI!.Operate machines and tools t

Are you ready to build your career with hands-on work in a clean, safe, and fun work environment? Are you a construction worker sick and tired of strictly seasonal positions, looking for something stable and year-round? Our client is looking for Assemblers to join their dynamic team! Interview once

We appreciate your interest in joining our team! At Robinson, Inc.Robinson is employee-owned and is driven by a dedicated team of skilled professionals that value.We strive to provide customer service that goes above and beyond the standard.Click here to view our Benefits Snapshot.For Paint Prep, th

Maintenance Electro-Mechanical II.To carry out activities of Electro-Mechanical Maintenance department to ensure that plant equipment is in optimal working condition.In this position you will have the opportunity to:.Perform preventative and predictive maintenance functions.Perform a variety of equi

Wisconsin Building Supply operates locations throughout Wisconsin supplying windows, doors, roofing, siding, millwork, builders hardware, columns, trim, mouldings, cabinetry, countertops, decking, railing, gypsum, lumber & plywood, insulation, and additional building materials.The Pre-Finish Assembl

Job Title: Mechanical Assembler.We specialize in designing and manufacturing conveyor systems that enhance the speed, reliability, and efficiency of moving consumer packaged goods.As a Mechanical Assembler, you will play a crucial role in assembling and verifying specifications of conveyor sections