Trabajos clearance en Chesapeake, VA - Page 9Crear alertas

Epsilon Systems is seeking a full time Pipefitter III for the Ship Repair Sector located in Portsmouth, VA. Position Summary Reads and interprets blueprints and sketches to repair, modify, install and dismantle various pipes and fittings associated with shipboard hydraulic, pneumatic and water systems. Performs fabrication, assembly and testing of piping systems and components. Requires little to no supervision. Responsibilities \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will report to an individual designated by the Foreman. These responsibilities include but are not limited to the following:\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.\n, • Returns tools/equipment checked out from the Tool Room to proper location and reports lost, stolen, missing or damaged items to the Facilities Foreman in accordance the Process Instruction.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to piping systems and components (e.g.; valves, compressors, reducers, filters etc.).\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).\n, • Performs intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Layouts material prior to performing pipe bending operations and machine parts to achieve proper joint design as per Technical Work Documents.\n, • Fabricates and installs intermediate/complex fixtures, jigs, supports and targets to ensure proper alignment during the welding process.\n, • Produces quality piping assemblies, in difficult or adverse conditions and is proficient in brazing.\n, • Performs flushing/cleaning of piping systems and components in accordance with TWD.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate, and/or military and/or civilian experience with marine piping systems in a repair department or shipyard.\n, • 8 years' experience.\n, • Must have the ability to obtain and maintain government base access and private shipyard access.\n, • Must be able to understand and perform intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Must have intermediate knowledge and understanding of shipboard piping systems (repair/ installation practices, procedures, pipe bending, alignments and troubleshooting) and blue print reading.\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Must be qualified in multiple brazing processes.\n, • Must be able to work outside of trade\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • Current security clearance level SECRET.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems Solutions Inc. is seeking a full time Maintenance Mechanic (Damage Control/Propulsion Systems Support) in Norfolk, VA. Job Summary: Provide Damage Control and Propulsion systems equipment & systems support for the Carrier Engineering Maintenance Assist Team (CEMAT). Responsible for working closely with CEMAT, Government, and ship's force personnel to assess, operate, and conduct maintenance on US Navy ship propulsion and damage control systems and equipment. Duties and Responsibilities: \n • Provides technical support on firefighting and damage control systems, structures and closures.\n, • Provides both classroom and shipboard practical maintenance training on Major HM&E Main Propulsion, Pumps, Valve and Valve Operators, LO Systems, and Flex Hoses on all classes of Surface ships within the Pacific Fleet operating area.\n, • Improves Ship's Force ability to self-assess designated propulsion and damage control Systems of Concern (SoC).\n, • Determines and documents material condition of SoC.\n, • Trains Ship's Force to fix their own SoC when task is assigned as an O-level task.\n, • Uses technical documents (PMS MIPs & MRCs, JIFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) contain information required to accomplish work and interact with and support of CEMAT Management Team.\n, • Assists Ship's Force in their performance of PMS, functional checks, tests and analysis, fault detection and formulating required corrective actions.\n, • Conducts PMS/assessments may include but are not limited to: MOGAS Storage Assessments for Certification, AFFF, Fire Pumps, Aqueous Potassium Carbonate (APC), Heptaflouropropane (HFP) space flooding, Collecting, Holding and Transfer (CHT) Assessments for Certification, Fire Main and components, Co2 fixed and flooding, Main & Secondary drainage systems, Radar cooling water, Bleed air systems, Vacuum Collecting, Holding and Transfer (VCHT),Water Mist, and Halon 1301, primarily onboard PACFLT Ships, including but not limited to CG, DDG, FFG, LHA, LHD, LPD, LSD, MCMs, LCS and MSC ships.\n, • Assists ships force with obtaining supply and repair parts information as required.\n, • Coordinates, schedules and works with support contractors, Government personnel and ship's force with the operations, maintenance processes and monitors material and parts to ensure on-time and accurate delivery schedules.\n, • Supports Project Managers, planners and estimators, purchasers, production shops as necessary.\n, • Participates in the management of support equipment inventories.\n, • Attends all required training provided.\n, • Analyzes processes and provide constructive input to process improvement teams.\n, • Uses logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.\n, • High school diploma or equivalent\n, • Minimum 5 years' experience with US Navy Propulsion HM&E and/or Damage Control equipment, operations and maintenance\n, • Familiar with the Navy's HM&E and/or Damage Control equipment, operations and maintenance\n, • Familiar with a variety of the field's concepts, practices, and procedures\n, • Experience in the Navy's production shop work flow process\n, • Recent hands on experience with accomplishing shipboard closure repairs with wire rope work\n, • Ability to obtain and maintain a DBIDS credential\n, • Ability to read schematics and blue prints and follow detailed instructions and be self-motivated\n, • Ability to work well on their own with minimal supervision\n, • Ability to read technical manuals and repair standards\n, • Ability to troubleshoot and assess various pieces of damage control equipment and closures\n, • Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations\n, • Ability to communicate effectively both verbally and in written formats with other activities in the military and civilian communities\n, • Ability to read, interpret, and follow detailed written instructions, or drawings and to conduct activities in a safe manner\n, • Ability to see details at close range (within a few feet of the observer)\n, • Understanding of the general and detailed aspects of the job, and their practical applications to problems and situations encountered on a regular basis\n, • Effective problem solving skills to determine causes of operating errors and deciding what to do about it\n, • Effective oral and written communication\n, • Associates degree in technical degree or military experience preferred\n, • Prior Navy service as an E-6 or higher in the DC field\n, • Requires walking, reaching, sitting and concentration in the presence of occasional noise\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects\n, • Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships)\n, • Ability to lift, carry and move objects up to 50 lbs in weight\n, • Office, warehouse, laboratory, pier side, shipboard noise conditions range from very quiet to loud noise\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow! *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Mechanic II to join our Fleet Services Group in Norfolk, VA to support of ship repair, modernization, and Alteration Installation Team (AIT) projects. The ideal candidate will have hands-on experience performing shipboard mechanical system maintenance, installation, troubleshooting, and repair. This position involves working in a dynamic maritime environment aboard U.S. Navy and other military vessels. Essential duties & responsibilities includes, but in not limited to the following: \n • Perform operational, troubleshooting, maintenance, and repair of shipboard mechanical systems across multiple platforms.\n, • Perform diagnostic troubleshooting and routine maintenance on shipboard systems to identify faults, restore functionality, and ensure long-term performance.\n, • Interpret blueprints, schematics, specifications.\n, • Install and test shipboard mechanical systems including piping, pumps, valves, hydraulics, and rotating machinery.\n, • Conduct system testing, calibration, and support commissioning of equipment and systems.\n, • Apply a comprehensive understanding of production methods and maintenance protocols to ensure quality and performance compliance.\n, • Accurately document and report maintenance and repair activities using quality assurance records and provide technical briefs to supervisors and clients.\n, • Train and mentor coworkers and customers on equipment operation, maintenance, and troubleshooting techniques.\n, • Collaborate with engineering staff, welders, electricians, and technical teams to execute multi-discipline projects.\n, • Follow all safety regulations, using appropriate PPE and adhering to lockout/tagout (LOTO) and shipboard safety protocols.\n, • Participate in shipboard inspections, alterations, upgrades, and configuration management in accordance with NAVSEA and DoD standards.\n, • The Mechanical Technician will report directly to an on-site Supervisor or Project Manager and will be responsible for executing mechanical tasks in support of ship repair and modernization projects.\n\n Experience and Skills Qualifications: \n • Must possess a Rigging Certification\n, • 3-5 years experience in rigging & shipboard maintenance & repair.\n, • Ability to read/understand complex standard Navy drawings, blueprints, sketches.\n, • Skilled at reading and comprehending OEM Type Equipment Technical Manuals.\n, • Operate and troubleshoot complex systems and system components utilizing approved operating doctrine.\n, • Ability to analyze and effect repairs as required using the appropriate tooling/equipment IOT correct the problem.\n, • Familiar with constructing, maintaining, repairing, and testing mechanical equipment, machinery, and components.\n, • Familiar with identifying parts for replacement and machines that need new parts and placing orders as necessary.\n, • Able to utilize Chainfalls, Straps, Hoists, Turnbuckles, and other ancillary rigging equipment.\n, • Ability to work in confined spaces, at heights, and in physically demanding environments.\n, • Must be authorized to work in the United States & obtain a clearance.\n, • Must be able to lift to 30 lbs., or more, climb ladders, and work in confined or elevated areas.\n, • Able to travel up to 25% of the time.\n\n Physical requirements: \n • Exposure to open-air environments, including noisy, hot, and cold conditions.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect maritime components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Requires prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment.\n, • Frequent exposure to extreme weather conditions, including high heat and cold.\n, • Must be able to lift to 30 lbs., or more, climb ladders, and work in confined or elevated areas.\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of an employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Overview Quality Control Tech shall have a strong knowledge of all inspection procedures and utilization of required measuring devices that correspond to the tasking in which they are assigned. Perform shipboard/alteration inspections referencing MIL-STD's, NAVSEA Standard Items, and MIL-SPEC's. Provide detailed reports documenting all "As Found" conditions during inspection, including Quality Assurance Workbook. Verify proper documentation of all required repairs and communicate identified deficiencies to production to initiate corrective actions. Ensure that all test and inspection documentation is accounted for and thoroughly completed prior to certification. Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals to develop Test and Inspection QA Workbooks, incorporating V, I, and G level inspection points to Test and Inspection Plans (TIP). Specific duties and responsibilities: \n • Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook.\n, • Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence.\n, • Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures.\n, • Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction.\n, • Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience.\n, • Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.\n, • Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements.\n, • Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations.\n, • ISO Lead Auditor Training a plus\n, • Certified Quality Inspector Certification\n, • NAVSEA Connector Certification\n, • NAVSEA Cableway Certification\n, • NAVSEA Fiber Optic QA/Supervisor Training\n, • Structural fit-up, welding, pipefitting, and NDT Level II experience/qualification is a plus.\n, • Active OSHA 7615 Maritime Training 10hr Card\n Specific duties and responsibilities: \n • Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook.\n, • Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence.\n, • Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures.\n, • Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction.\n, • Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience.\n, • Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.\n, • Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements.\n, • Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations.\n Other Required Skills \n • Active secret security clearance desirable\n, • Clearance: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ability to obtain a Secret clearance is required.\n, • Candidate must be able/willing to travel in CONUS/OCONUS\n, • ISO Lead Auditor Training a plus\n, • Fiber Optic Connector QA/Build training\n, • Exposure to computer screens for an extended period of time.\n, • Sitting for extended periods of time.\n, • Reach by extending hands or arms in any direction.\n, • Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n, • Communicate information and ideas in speaking so others will understand.\n, • Read and understand information and ideas presented in writing.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Identify and understand the speech of another person.\n

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY:Provide support to the US Navy LOCATION:Norfolk, VA PRINCIPAL DUTIES/RESPONSIBILITIES: • 1 - 3 years of experience., • Experience working in a shipyard / ship repair environment., • Able to read and interpret blueprints, sketches, written technical instructions and manuals, and lead and supervise their implementation., • Prospective employees must be a US Citizen with a Clean Background and able to pass a Drug Screen, • Experience working on all classes of ships (CVN, CG, DDG, SSN). Able to hold and maintain a security clearance a plus, • High school diploma or GED equivalence, • Ability to obtain DBIDS is required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00060 This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Proficient in ability to install, overhaul, and repair US Naval submarine and ship machinery, mechanical systems, and components such as pumps, valves, launchers, and actuators as well as assisting project teams with the installation of structural and piping components. LOCATION: Norfolk, VA. DUTIES/RESPONSIBILITIES: • Performs installation, repair, and overhaul of machinery, mechanical systems, and components., • Performs system or component level inspections as directed by the Project Manager., • Assists welders and pipefitters with fit up and installation of structural and piping components., • Performs installation, repair, and overhaul in accordance with Technical Work Documents (e.g. QAWBs, Maintenance Standards, & Technical Manuals) and associated drawings., • Responsible for documenting inspections and work performed in both the Technical Work Document and on associated Objective Quality Evidence Forms as applicable., • Performs installation, repair, and maintenance utilizing hand tools, power tools, and Precision Measuring Instruments., • Expected to work well both independently and in a team setting., • Minimum of 3 years of experience in mechanical / equipment installation, repair, and overhaul on US Naval vessels; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program, or an apprenticeship program., • Submarine experience and experience with SUBSAFE, DSS-SOC, and/or LEVEL I systems and components is preferred., • Experience and working knowledge of utilizing hand tools, power tools, and Precision Measuring Instruments., • Experience working in shipyards and ship repair environments., • Possess ability to read, understand, and interpret Technical Work Documents and drawings., • While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear., • Frequently the employee is required to carry objects that might weigh up to 50 pounds., • High School Diploma or GED equivalency is required., • Prospective employees must be a US Citizen and capable of passing both a Criminal Background Check and a Drug Screen., • Current SECRET Level Security Clearance is required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00107 This position is currently accepting applications.

Epsilon Systems is seeking a full time Pipefitter II for the Ship Repair Sector located in Portsmouth, VA. Summary Reads and interprets blueprints and sketches to repair, modify, install and dismantle various pipes and fittings associated with shipboard hydraulic, pneumatic and water systems. Performs fabrication, assembly and testing of piping systems and components. Requires little to no supervision. Responsibilities \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will report to an individual designated by the Foreman. These responsibilities include but are not limited to the following:\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.\n, • Returns tools/equipment checked out from the Tool Room to proper location and reports lost, stolen, missing or damaged items to the Facilities Foreman in accordance the Process Instruction.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to piping systems and components (e.g.; valves, compressors, reducers, filters etc.).\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).\n, • Performs intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Layouts material prior to performing pipe bending operations and machine parts to achieve proper joint design as per Technical Work Documents.\n, • Fabricates and installs intermediate/complex fixtures, jigs, supports and targets to ensure proper alignment during the welding process.\n, • Produces quality piping assemblies, in difficult or adverse conditions and is proficient in brazing.\n, • Performs flushing/cleaning of piping systems and components in accordance with TWD.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate, and/or military and/or civilian experience with marine piping systems in a repair department or shipyard.\n, • 5 years' experience.\n, • Must have the ability to obtain and maintain government base access and private shipyard access.\n, • Ability to obtain and maintain National Security Clearance Level Secret.\n, • Must be able to understand and perform intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Must have intermediate knowledge and understanding of shipboard piping systems (repair/ installation practices, procedures, pipe bending, alignments and troubleshooting) and blue print reading.\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Must be qualified in multiple brazing processes.\n, • Able to work outside of trade.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems Solutions, Inc. has an opportunity for a full-time Quality Assurance and Non-Destructive Test Specialist in Virginia Beach, VA. Summary: The Quality Assurance and Non-Destructive Test Specialist will provide Quality Assurance (QA) and Non-Destructive Testing (NDT) to command forces for testing, inspection and certification of minor and major structural repairs. Roles and Responsibilities: \n • Conduct visual, liquid penetrate and magnetic particle inspection methods to assess weld repairs completed on heavy equipment\n, • Review work packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements.\n, • Follow basic Test and Inspection Plans for projects.\n, • Perform in-process work surveillances and weld surveillances and assist production management with final work-package review after work-completion.\n, • Help prepare Corrective Action Requests, and Preventative Action requests as related to repair work to ensure compliance with established policies, procedures and work instructions.\n, • Ensure compliance with NAVSEA Standard Item and other customer-related requirements to ensure work is conducted accurately and safely.\n, • Follows test standards and specifies test equipment associated with requirements established in test and inspection plans.\n, • Bachelor's Degree or equivalent of 6 years general quality management systems experience and a minimum of recent (within 15 years):\n, • Five (5) consecutive years in Quality Assurance and Non-Destructive Testing;\n, • Five (5) consecutive years' experience in shipbuilding environment with general knowledge and understanding of metallic fabrication machinery, precision welding, brazing, tube bending, and shipboard safety;\n, • Five consecutive (5) years' experience and certification to Level II NAVSEA TECH PUB 271 or ASNT TC-1A for Non-Destructive Testing to include; Visual, Liquid Penetrate, and Magnetic Particle Inspection Methods.\n, • Knowledge of proper use of diagnostic equipment\n, • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel.\n, • Possess organizational skills.\n, • Possess effective oral and written communication skills.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Possess or ability to obtain and maintain a secret clearance.\n, • Prior military expeditionary equipment maintenance experience.\n, • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n, • Travel may be required within and outside of the continental United States.\n, • Travel requirement less than 25%\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the welder is to provide day-to-day Shipboard installation and welding support for a variety of RF, audio, video, and communication systems installations. This position reports to the Installation Group Project Manager. This job posting is always active. Resumes will be collected even when there are no openings. Work Model: Onsite Responsibilities Essential Duties & Job Functions: \n • Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:\n, • the Shipboard installation and integration of complex audio visual display\n, • various communication and electronic warfare systems\n, • related ancillary and computer based systems onboard naval ships and command centers worldwide.\n Mandatory: \n • Must be a U.S. citizen.\n, • Must have or be able to obtain a Secret clearance.\n, • Must have High School diploma.\n, • Must be willing to travel up to 75% CONUS/OCONUS.\n, • Must be willing to work extended hours including weekends and holidays.\n, • Must have a valid driver's license and reliable transportation.\n, • Must have experience in welding steel and aluminum.\n, • Must have experience welding in a shipyard environment.\n, • Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs\n, • Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.\n, • Must be able to successfully pass a pre-employment background check and pre-hire drug test.\n\n Preferred: \n • Experience brazing copper nickel pipe and Oxy Fuel torch operation.\n, • CPR and first aid training experience.\n, • Confined space training.\n, • Climber safety training.\n\n Working Conditions: \n • This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.\n, • Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.\n, • Work may also be performed outside even during in climate weather.\n, • Work may be performed at heights (aloft) where fall protection is required. \n, • Work may be performed welding and cutting of metal.\n, • Work may be performed off a ladder.\n\n Physical Requirements: \n • Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.\n, • Work at heights (aloft).\n, • Operate power tools safely.\n, • Carry equipment and machinery around ships. \n, • Ability to stand and walk most of the shift.\n, • Kneel and crawl at work site.\n, • Crouch through void openings.\n, • Safely evacuate ship during an emergency.\n\n Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email [email protected]. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Proficient in fit up, brazing, assembly, and installation of piping systems and components onboard US Naval submarines and ships as well as off hull fabrication efforts. LOCATION:Norfolk, VA. DUTIES/RESPONSIBILITIES: • Performs shipboard fit up, brazing, and assembly of piping systems and components in support of installation, repair, and maintenance efforts., • Performs fit up, brazing, and assembly in support of off hull fabrication efforts., • Responsible for layout, templating, and targeting piping for both brazing and welding applications., • Assists welders and mechanics with fit up and/or installation of piping, structural, and mechanical components., • Performs fit up, brazing, assembly, installation, repair, and maintenance in accordance with Technical Work Documents (e.g. QAWBs, Maintenance Standards, & Technical Manuals) and associated drawings., • Responsible for documenting requisite inspections, brazing, and mechanical joint assembly efforts in both the Technical Work Document and on associated Objective Quality Evidence Forms., • Responsible for selection and control of brazing filler material, joint design, and brazing rig setup in accordance with the Technical Work Document and company Quality Assurance Procedures., • Expected to work well both independently and in a team setting., • Minimum of 5 years of experience in performing brazing operations, fit up, and assembly of piping systems in support of installation, repair, and overhaul efforts on US Naval vessels; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program, or an apprenticeship program., • Proficient in performing both Face Fed and Insert Ring brazing operations for Grade III, IV, and V alloys., • Proficient in performing pipe bending utilizing hand, mechanical, and pneumatic pipe benders for completing 3D and 5D pipe bends., • Experience with performing setup, operation, and adjustment of brazing rig (e.g. torch, lines, bottles, gauges, flowmeter) and associated hand/power tools., • Submarine experience and experience with SUBSAFE, DSS-SOC, and/or LEVEL I systems and components is preferred., • Experience working in shipyards and ship repair environments., • Must possess the ability to read, understand, and interpret Technical Work Documents and drawings., • Must possess understanding and working knowledge of the basic math (e.g. geometry, addition, subtraction) required for bending, targeting, and installing piping systems and components., • While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear., • Frequently the employee is required to carry objects that might weigh up to 50 pounds., • High School Diploma or GED equivalency is required., • Prospective employees must be a US Citizen and capable of passing both a Criminal Background Check and a Drug Screen., • Current SECRET Level Security Clearance is required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-24-00006 This position is currently accepting applications.

Job Description This is a year-round position located in Norfolk, VA. Primary responsibilities include, but are not limited to: Designer \n • Perform ship checks to support DDG design development. \n, • Acting in a liaison capacity supporting the local PMR, SWRMC, and their Installing Agents (IA) with the installation of maintenance and / or modernization alterations during the ships scheduled CNO availabilities.\n, • Annual wage and promotion increases\n, • Flexible work schedules\n, • Vacation/Sick time options\n, • 401k matching.\n\n Required/Preferred Education/Training \n • High School Diploma / GED required.\n, • Associates / Bachelor's degree in a technical field preferred.\n, • Proficiency with Microsoft Office tools required.\n Required/Preferred Experience 1st Class: ($33.02/Hr. - $39.13/Hr. - Includes Cost of Living Adjustment) \n • Minimum of seven (7) years design experience, OR\n, • Bachelor's degree with (2) years of design experience, OR\n, • Associate / Vocational School degree with four (4) years design experience required\n, • Credit may be given for graphic arts or computer information systems experience\n\n 2nd Class: ($29.38/Hr. - $31.69/Hr. - Includes Cost of Living Adjustment) \n • Minimum of four (4) years design experience, OR\n, • Bachelor's degree in a related technical field (Engineering, Engineering Technology, Architecture), OR\n, • Associate / Vocational School degree with two (2) years design experience, required\n, • 3D CAD or AutoCAD proficiency\n, • Credit may be given for graphic arts or computer information systems experience\n\n\n, • Ability to interpret and follow technical procedures, standards, and work instructions required.\n, • Marine design/liaison experience may be required.\n, • Design background with multi discipline experience preferred.\n, • Proficiency in developing design in Auto-CAD.\n, • Knowledge of DDG Class ships and shipboard systems.\n, • Proficiency in moderate to complex development work, problem solving and the review/check of another employee's work required may be required.\n, • Must have strong communication skills and ability to work in a team environment.\n, • Demonstrated ability to work independently with little oversight.\n, • Ability to represent Bath Iron Works autonomously and in a professional manner.\n\n This position requires you to be able to obtain a government security clearance. You must be a US Citizen for consideration and you must be able to obtain an interim security clearance within the first 45 days of hire. For more information regarding the security clearance process, please visit Investigations & Clearance Process This job requires visiting ships on a regular basis and working in an industrial environment. This will require some climbing, kneeling, bending, carrying a back pack, and occasionally needing to squeeze in between cabinets and into tight spaces.

Epsilon Systems Solutions, Inc. has a job opportunity for a Quality Control Inspector III in Portsmouth, VA. Summary: Directly reports to the QA Supervisor. Inspects and monitors work performed on government and commercial work items, specializing in Hull, Mechanical and Electrical Inspections for Quality compliance. Provide assistance to onsite management for quality assurance, safety requirements and other needs as requested. Provides project QA inspections and testing as needed. Non-Supervisory. Provide assistance to onsite management for quality assurance, safety requirements and other needs as requested. Provide project QA inspections and testing as needed. Duties and Responsibilities: \n • Reviews work packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements.\n, • Follows basic Test and Inspection Plans for projects.\n, • Performs in-process work surveillances, safety surveillances and assists production management with final work-package review after work-completion.\n, • Performs internal in-process audits to monitor compliance with company procedures and performs external audits to evaluate supplier performance while on worksite.\n, • Communicates to the QAS to help prepare Corrective Action Requests, and Preventative Action requests as related to production work to ensure compliance with established policies, procedures and work instructions.\n, • Assists Program Managers, Project Managers, and Supervisors/Foreman in the compliance of NAVSEA Standard Item and other customer related requirements to ensure work is conducted accurately and safely.\n, • When assigned to an on-site project, supports the Project Manager and Supervisor/Foreman to ensure all documentation is completed as required.\n, • Assists production in other ways as necessary (i.e. Fire Watch, Tank Watch, general cleaning, material control, etc.).\n, • Monitors compliance with company Quality and Safety Management Systems, Workmanship standards and Customer requirements.\n, • Follows safety, quality control and inspection procedures for test and inspection plans for production Work-Packages and QA Work Books.\n, • Follows test standards and specifies test equipment associated with requirements established in test and inspection plans.\n, • Schedules and conducts in-process "Self-Assessment", in-process Safety/Quality Assurance inspections, Audit and Surveillances for the assigned Project Manager.\n, • Performs audits and surveillances of suppliers/subcontractors for in-process work.\n, • Coordinates with customer QA/Safety representatives to coordinate inspection and acceptance activities.\n, • Reviews QA/Safety control requirements with customer representative to assure compliance with requirements.\n, • Reviews contractually required quality/safety documentation for accuracy and completeness for project/job/contract completion.\n, • Maintains OQE records retention.\n Bachelors Degree and 4 years waterfront Quality Inspection/Testing experience. Bachelors Degree may be substituted with a completed Maritime Trade School / Apprenticeship with 5 years waterfront Quality Assurance experience OR 4 years military service with specialized training and certifications in Quality Inspection/Testing. Bachelors Degree/Trade School/Military Service may be substituted with GED minimal education and specialized training and certifications in Quality Assurance with 8 years total waterfront experience with 5 years Quality Inspection/Testing experience. Travel: Must be able to travel for extended periods of time (85%) Job Training: Safety, Quality Assurance and NAVSEA Standards for shipboard work. Certifications: Quality Assurance Inspector, NACE/NBPI (desired), NDT Level II (desired) Base Access: Must be able to obtain and maintain access to U.S Military bases and shipyards for performance of job duties. Must be able to obtain and maintain Secret Security Clearance. Knowledge: Knowledgeable in shipyard, maritime, and commercial work practices, quality assurance, safety, Metal-work and contracting methods. Knowledge of Navy ship repair processes and procedures to include extensive Level I, SUBSAFE and SOC quality inspection experience. Knowledge of OSHA Regulations for Shipyard Employment, NAVSEA Standard Items, Joint Fleet Maintenance Manual (JFMM), NAVSHIPS Tech Manuals (NSTM), and DOD Standards, Military Specifications, Performance Standards, and other customer related specifications and standards Knowledgeable in all aspects of workplace Safety. Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective fabrication or manufacture and distribution of products. Skills Safety Analysis - Conduct Job Hazardous Analysis specific for tasking Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Writing - Communicating effectively in writing as appropriate for the needs of the audience. Instructing - Teaching others how to do something. Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. Computer - Proficient in Microsoft Office programs including but not limited to Word, Excel, Power Point and Access Abilities: Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Able to read Structural, Mechanical and electrical Drawings. Written Communication - Able to clearly articulate information and instructions in writing Oral Comprehension - The ability to listen to and understand information and ideas presented orally. Oral Expression - The ability to orally communicate information, ideas and instructions so that others will understand. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Category Flexibility - The ability to generate or use different sets of rules for combining or grouping things in different ways. Visual Color Discrimination - The ability to match or detect differences between colors, including shades of color and brightness. Deductive Reasoning-The ability to apply general rules to specific problems to produce answers that make sense. Physical Requirements/Work Environment: Must be able to physically access ships, small craft, and submarines. Able operate in: confined Spaces, noisy environment, extreme height, heavy Industrial conditions, high traffic areas, office environment, meetings and multiple locations. Able to Remain calm in: Stressful situations including; high pressure production schedule, strict workmanship requirements, customer interface, regulatory requirements. ADA Notations: Work may be performed in confined spaces, noisy environments, heavy industrial conditions, high traffic areas, office environment, meeting rooms and multiple locations; also in outside conditions ranging from extreme heat to extreme cold. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Requisition Number: 25021 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $41,600.00 - $50,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII as we keep the world's most powerful Navy afloat! Join our Elevator Support Unit (ESU) as a Marine Mechanic! This position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. Travel within and outside of the continental United States may be required. This is a full-time position, located in Chesapeake, VA. What You Will Do • Perform maintenance and repairs on aircraft carrier elevators, cargo handling systems, vertical stores conveyors, and associated equipment., • Work closely with higher level employee in specialized assignments., • May train/assist other employees/navy personal on shipboard systems and day-today operation., • Work includes daily activities of physical labor in an industrial and shipboard environment., • Applies comprehensive understanding of production and processes toward completion of assignments.\n What You Must Have • High School education, or Trade School or equivalent, and 2 years of related experience., • Must be able to obtain medical clearance to wear a half-face respirator., • Must be able to obtain base access credentials within 60 days of start date, and maintain credentials throughout employment., • Must be able to travel when not assigned to local tasking., • Must have experience installing, maintaining and repairing structural and mechanical systems and associated equipment., • Must have experience using various power tools and measurement devices., • Must have the ability to read, interpret and follow blueprints, technical drawings and/or technical manuals., • Must have knowledge of safety and quality control steps and procedures., • Must be able to obtain and maintain a DoD security clearance, and maintain clearance level throughout employment., • Must be able to provide hand tools per trades designation.\n Preferred: Bonus Points For • Experience related to maintenance and repair of shipboard aircraft elevator, ordnance handling equipment, or vertical package conveyors preferred., • Prior Shipboard experience preferred., • Candidates who have graduated from and/or completed a vocational school, apprenticeship program or a skilled trades certificate program are preferred., • Current or active DoD clearance a plus., • OSHA 10 Maritime Certification a plus.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Join our team as a Project Engineer (PE) and take the lead on exciting, large-scale projects that challenge your technical expertise and leadership skills. As a key member of our engineering department, you'll work closely with the Chief Engineer and Project Manager to define and manage the resources, schedule, and costs for our cutting-edge projects. Collaborating with diverse teams across our organization, including QA, Manufacturing, Purchasing, Shipping and Receiving, you'll provide crucial engineering support throughout the manufacturing, integration, and testing phases. With your guidance, our engineering team will deliver high-quality solutions from initial concept to successful completion, ensuring project and production availability align with customer specifications. If you're ready to drive innovation and make a tangible impact within a collaborative environment, apply now. EXPECTATIONS: \n • Self-motivated, focused individual with strong attention to detail and high ethical standards. \n, • Capable of developing and leading a small engineering team through a complex submarine overhaul.\n, • Ability to read and interpret blue prints, applicable submarine specifications and Special Emphasis Program requirements. \n, • Ability to work as part of a team of managers and technical personnel and support multiple projects. \n, • Strong organizational skills and analytical / logical approach. \n, • Ability to synthesize diverse information (technical, schedule) and exercise good judgment.\n, • Independently performs difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others.\n, • Excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions are expected.\n, • Demonstrates ability to devise innovative solutions to problems.\n, • Develops objectives, schedules, and estimates for difficult assignments.\n, • Directs and supervises the activities of small to moderate size teams of engineers and tech writers\n, • Reviews progress and evaluates results of work accomplished by self and others.\n, • Interacts with customer technical representatives to define and manage customer expectations.\n, • Uses team management skills to lead the design or production engineering group during various phases of a project or availability.\n, • Reviews Engineering Work Packages (e.g. TGIs) related to project.\n, • Assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data.\n EDUCATION: • Minimum 5 years engineering experience in complex systems design, manufacturing, and integration environment. Knowledge related to submarine structural fabrication and welding requirements such as NAVSEA Tech Pub 1688, 278, or 248 and the NAVSEA URO/MRC program desired.\n, • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work.\n, • Demonstrated ability to lead technical groups. \n, • Excellent communications and organizational skills.\n, • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work.\n, • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields.\n, • Has provided field support in engineering capacity.\n, • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere.\n, • Must be able to obtain a U.S. DoD Secret Security Clearance.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Must be willing to travel up to 25%.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description Company Overview: Continental Tide Defense Systems,Inc. (Continental Tide) is an industry leader, providing engineering andindustrial services to the U.S. Navy, U.S. Coast Guard, Military SealiftCommand, and other DoD organizations. At Continental Tide, we understand that agreat company culture is one where employees know their voice is heard, nomatter what their title is, and letting them grow in their role as the companydoes. We want to provide our employees with the opportunity to learn, bechallenged and be in a position where they can succeed, develop new skills, anddo things they wouldn't have the opportunity to do elsewhere. Our fast-pacedand challenging environment, employees here at Continental Tide can catapultthemselves to the top and we're looking for 'the best at what they do' to joinour team and help us grow! Job Description: Continental Tide is seeking amotivated, energetic, and experienced Engineering Technician with astrong structural background and Alteration Installation Team (AIT) leadershipexperience to support our ship modernization and sustainment projects in Norfolk,VA. This is a field-oriented leadership role ideal for a hands-on technicalprofessional experienced in the installation, modification, and repair of U.S.Navy ship structures. The successful candidate will oversee installationefforts and coordinate all aspects of structural and mechanical work duringshipboard alterations and repairs, ensuring work is performed safely,efficiently, and in compliance with Navy and contract standards. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Essential duties & responsibilities include, butare not limited to the following: \n • Serveas the structural SME and project lead for hull, mechanical and structuralrepairs projects, managing day-to-day operations onboard ships and in shipyardenvironments.\n, • Leadstructural teams in the layout, cutting, fitting, installation, and alignmentof structural components including bulkheads, deck inserts, framing, andfoundations.\n, • InterpretNAVSEA drawings, blueprints, and technical specifications to plan and executestructural work packages in compliance with 9090-310 REV H or latest version.\n, • Superviseand mentor shipfitters, mechanics, welders, and helpers to ensure qualitycraftsmanship and safe work practices.\n, • Collaboratewith Project Leads, Program Managers, Engineers, QA &QC, and customerrepresentatives to resolve issues and align project goals.\n, • Assistin tracking and report daily progress, labor hours, and material usage; assistin scheduling and forecasting work.\n, • Ensureall structural work adheres to NAVSEA Standard Items, ABS requirements, OSHAregulations, and company policies.\n, • Adhereto, maintain, and update all QA documentation OQE to include but not limited toweld maps, inspections, and post-repair testing.\n, • Identifyand mitigate project risks, support change orders, and contribute toafter-action reporting.\n, • Asrequired perform duties and responsibilities as Site Foremen as a project lead foroverall task assignment.\n, • SubmitDaily Status Reports (DSR), develop Condition Found Reports, and updateprogress utilizing Microsoft Project in POA&M (plans of action &milestone) format.\n\n Experience and Skills \n • Targetexperience of ten (10) years of experience in shipfitting or structural shiprepair, with at least three (3) years in a supervisory or lead role.\n, • Technicalexpert in shipboard structural repairs including insert installation, hullcuts, and steel fabrication.\n, • Strongunderstanding of QAWBs, OQE documentation, and structural inspection processes.\n, • Provenleadership skills in a shipboard or industrial repair environment. \n, • Eligibleto obtain a DoD Secret Security Clearance.\n, • Mustbe able to work in confined spaces, at heights, and aboard vessels. \n, • Proficientin reading and interpreting NAVSEA drawings, welding symbols, and installationspecifications.\n, • Experiencewith maintaining budgets and material.\n, • FormerU.S. Navy Hull Technician (HT) or shipyard trade certification in structuralfabrication or welding.\n, • Weldingcertifications (FCAW, SMAW, GMAW) are a plus.\n, • Experiencewith HPUs, Valves, Pumps/Motors, Hydraulic systems is a plus.\n, • Experiencesupporting NAVSEA modernization programs.\n, • Experience communicating directly with management,subcontractors, and customers regarding project cost, staffing, and scheduling.\n, • Background in preparing status reports and ensuring plansadhere to contract specifications.\n, • OSHA10 or 30 Maritime Certification.\n, • Exposureto open-air environments.\n, • Requiredto visit project sites aboard ships and rigs, both onshore and offshore.\n, • Wearvarious types of personal protective equipment (PPE), (i.e. ear plugs, safetyglasses, hard-hat, steel-toed boots, gloves) as required.\n, • Sitevisits may involve standing on a variety of surfaces and angles, bending,crouching, and climbing over obstructions such as scaffolding, ladders, andinternal barge or boat structural components.\n, • Exposureto sound levels exceeding 100 decibels.\n, • Mustpossess sufficient visual acuity, peripheral vision, depth perception, andnight vision to inspect marine components and systems, identify defects orirregularities, and safely operate tools and equipment.\n, • Maywork in confined spaces with limited ventilation.\n, • Requireprolonged periods of sedentary work, including sitting and/or standing.\n, • Maybe required to operate machinery, power tools, and/or heavy equipment.\n, • Mustbe able to communicate effectively to exchange and comprehend information.\n, • Frequentexposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Summary You will serve as a MARINE MACHINERY MECHANIC SUPERVISOR I in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will direct personnel in troubleshooting, repairing, overhauling, and installing marine engines and other equipment, such as propulsion machinery auxiliary generators, pumps, compressor, and fire fighting machinery on vessels.\n, • You will coordinate with contractor technical representative personnel when assigned to perform troubleshooting, analysis, and/or repairs.\n, • You will provide direction to workers by assigning the immediate tasks to be performed by individual members of the group; ensuring proper work methods; and seeing to it that needed plans, blueprints, materials, and tools are available.\n, • You will determine performance of a satisfactory amount and quality of work and review products for acceptability.\n, • You will actively support and promote all aspects of the Equal Employment Opportunity (EEO) Program.\n, • You will check work in progress and when finished to ensure instructions on work sequence, procedures, methods, and deadlines have been met.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Epsilon Systems is currently seeking a full-time Welder Specialist in the ME division located in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will take responsibility for the job.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 8 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Must be qualified in more than 15 welding/brazing processes to include flux core welding.\n, • Must be qualified in Automated welding processes to include exotic metals such as Inconnel, Titanium, Duplex Stainless, Ferrilium.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Current DoD Secret Security Clearance ADA Notations: Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Work conditions vary from indoors to outdoor, very hot to very cold. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Fabrication C – Welder / Fabricator Job Code: 26001 Job Location: Norfolk, VA – (Responsibilities must be performed on-site.) Job Schedule: 5/8 Work Schedule – (Monday thru Friday) Job Description: L3Harris is seeking a highly skilled Welder / Fabricator to join our Norfolk, VA team. The ideal candidate will be proficient in both TIG (GTAW) and MIG (GMAW) welding processes, capable of working with aluminum, steel, and stainless steel. This role requires the ability to read and interpret tight tolerance drawings and perform fixturing and setup of parts using precision welding tables. In addition to welding, some assembly work will be required. Essential Functions: \n • Welding: Perform TIG (GTAW) and MIG (GMAW) welding on various metals, including aluminum, steel, and stainless steel. \n, • Fabrication: Fabricate structures and machined components according to specifications. \n, • Blueprint Interpretation: Read and interpret tight tolerance drawings to ensure accurate fabrication and assembly. \n, • Fixturing and Setup: Use precision welding tables and fixturing to set up parts for welding. \n, • Assembly Work: Perform assembly tasks as needed in addition to welding duties. \n, • Team Collaboration: Work collaboratively with other departments to achieve project goals. \n, • Quality Standards: Maintain general knowledge of workmanship to military standards. \n\n Qualifications: · Minimum of 5 years of relevant experience or trade school certifications in welding. · Demonstrated strong foundational knowledge and practical skills in welding techniques. · Ability to pass a 3G plate test in all positions for aluminum, steel, and stainless steel. · Strong proficiency in TIG (GTAW) and MIG (GMAW) welding processes. · Ability to read and interpret technical drawings with tight tolerances. · Experience with fixturing and setting up parts using precision welding tables. · Excellent attention to detail and commitment to producing high-quality work. · Team player with strong communication and collaboration skills. Preferred Additional Skills: · Willingness to travel as needed. · Knowledge of most metal types used for fabrication. (Steel, Stainless, Aluminum, Monel, k500) · Willingness to work overtime as needed. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Fabrication D - Welder / Fabricator Job Code: 28161 Job Location: Norfolk, VA - (Responsibilities must be performed on-site.) Job Schedule: 5/8 Work Schedule - (Monday thru Friday) Job Description: The Lead Fabrication Welder will be responsible for performing Tig and Mig welding processes (Aluminum, Steel and Stainless), lead and supervise other welders. The ideal candidate will be proficient in both TIG (GTAW) and MIG (GMAW) welding processes, capable of working with aluminum, steel, and stainless steel. This role requires the ability to read and interpret tight tolerance drawings and perform fixturing and setup of parts using precision welding tables. In addition to welding, some assembly work will be required. Essential Functions: \n • Perform fixturing and setup of parts using precision welding tables and fixturing.\n, • Perform fabricatin shop welding and build to right tolerance specifications.\n, • Welding: Tig and Mig (Flux Core) welding in fabrication shop. (Aluminum, Steel, and Stainless)\n, • Read and Interpret Blueprints, and tight tolerance drawings.\n, • Knowledge of most metal types used for fabrication. (Steel, Stainless, Aluminum, Monel, k500)\n, • Lead and mentor a team of welders, providing guidance, training, and support to ensure high-quality work and adherence to safety standards.\n, • Assign tasks and oversee the work of welding team members, ensuring efficient workflow and timely completion of projects.\n, • Inspect completed welds to ensure they meet industry standards and project specifications, identifying and correcting any defects or inconsistencies.\n, • Encourage a culture of continuous learning and development within the welding team, promoting skill enhancement and career growth.\n\n Qualifications: • Requires fully proficient job knowledge/skills. Typically obtained through a combination of education and experience.\n\n, • High School Diploma or equivalent with six (6) years of welding and fabrication experience.\n, • 2 years post-secondary/associates degree with two (2) years of welding and fabrication experience.\n, • Possess general knowledge of workmanship to military standards\n\n \n • Able to successfully pass a plate test in 3 positions.\n, • Must be a US Citizen.\n\n Preferred Additional Skills: \n • Knowledge of most metal types used for fabrication, including steel, stainless steel, aluminum, Monel, and K500.\n, • Willingness to work overtime as needed.\n Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Epsilon Systems is currently seeking a full-time Welder III in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 5 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Must be qualified in a minimum of 15 welding/brazing processes to include flux core welding.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems is seeking a full time Welder Specialist (Submarine) in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 5 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to travel.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description HUTCO, INC. Job Title: Temporary Services Mechanic J1–J4 Job Location: Norfolk VA Pay Rate: $26.00 per hour Office Location: Portsmouth VA Company Overview Hutco Inc. is a trusted provider of skilled tradespeople to the maritime and industrial sectors, supporting vital shipbuilding, repair, and maintenance operations. As a leading staffing partner in the shipyard industry, Hutco connects experienced craftsmen and women with rewarding careers on the waterfront. Join our team and help keep America's fleets ready. Position Details • Shift: Day Shift (6:00 AM – 2:45 PM) | ALL shifts may be required, • Security Clearance: Not required The Temporary Services Mechanic is responsible for setting up, maintaining, and troubleshooting temporary utility systems such as ventilation, power, water, air, and fuel support used aboard ships under repair. This position supports safety and efficiency by ensuring that all temporary services are functional and in compliance with OSHA, NAVSEA, and shipyard safety standards. Guidelines by Level Journeyperson 4 • Oversees small work teams and plans, organizes, and prioritizes tasks, • Proficient in freeze protection, backflow preventers, and fire station maintenance, • Installs water coolers and ensures compliance with safety regulations, • Installs/maintains freeze protection systems, backflow preventers, and air dryers, • Sets up hydrostatic tests and installs rat guards, • Performs walk-through inspections for NAVSEA compliance (009-07, 009-08, 009-28), • Routes and inspects hoses, ducting, and electrical leads with limited supervision, • Assists with installation and testing of air/water systems, • Understands safety protocols and temporary equipment setup, • Assists with all temporary utility installations and shipboard routing, • Reads ship layout drawings and understands compartmental nomenclature, • Performs receipt inspections of rental equipment (air compressors, generators, etc.), • Certified in forklift operation and experienced in safe fuel handling, • Completes all work in compliance with NAVSEA 009-08, 009-24, and 009-28, • Must be able to: carry, lift, walk, climb, kneel, stoop, crouch, sit, and stand, • Must be able to go aboard ships, work in confined spaces, and tolerate environmental extremes, • Responsible for ensuring all temporary services are safely installed, maintained, and inspected per project requirements, • Reports To: Temporary Services Supervisor A limited benefit plan is available to Hutco Inc. employees through Essential Staff Care. The hotel is advanced for the first two weeks (loan). Available plans include: • Medical / Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Benefits CONTACT HUTCO TODAY! Apply Online or Visit Our Newport News Branch: 728 High Street, Suite 200 Portsmouth, VA 23704 ???? Send Resumes To: ???? Call Us At: (757) 223-7680 Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a MARINE MACHINERY MECHANIC LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems.\n, • You will utilize and apply standard formulas, shop mathematics, trade theories, and industry practices in calculating needed materials and problem solving.\n, • You will utilize various test equipment and measuring devices such as alignment scopes, verniers, micrometers, precision levels, transits, strobe tachometers, bearing bridge gauges, flow meters, hydrostatic testers, and vibration analyzers.\n, • You will set up and operate machine tools such as small lathes, milling machines, drill presses, and precision grinders to manufacture component parts or remachine existing parts such as bushings, bearings, seals, couplings, and pistons.\n, • You will utilize machine tools for onsite milling, grinding, boring, facing, and drilling, and the use of various other portable machine tools to accomplish repairs.\n, • You will disassemble, repair, and rebuild components and assemblies such as shafts, propellers, rudders, engines, and sea valves.\n, • You will operate machinery and equipment for launching and arresting gear systems, missile handling and launch systems, torpedo tubes, periscopes, antennas, sonar, and radar equipment, and shipboard equipment.\n, • You will interpret and apply the requirements contained in technical manuals, shop directives, multiview blueprints, and other documents in determining critical dimensions and key reference points.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a PIPEFITTER LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will pass on instructions received from supervisors and get work started.\n, • You will work with other workers and set the pace.\n, • You will ensure plans, blueprints, materials, and tools are available, and needed stock is obtained from supply locations.\n, • You will maintain a current knowledge and answer questions of other workers on procedures, policies, written instructions and other directives.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of two to three years of applicable welding experience\n, • ASNT NDT Level III Certification, or relevant experience.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Requisition Number: 25265 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $78,897.00 - $96,657.60 Security Clearance: Ability to Obtain Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Job Description HII Mission Technologies is seeking a highly skilled and experienced Interface Engineer to join our team in Chesapeake, VA. The ideal candidate will be responsible for defining, documenting, and managing the interfaces between various hardware and software systems within complex defense and technology projects. This role requires a strong understanding of systems engineering principles and the ability to work collaboratively across multiple disciplines to ensure seamless integration and functionality. This position is contingent upon contract award. Essential Job Responsibilities • Review engineering drawings and documentation on Commercial Item/Non-Developmental Item (CI/NDI) and military specification (MILSPEC) equipment., • Act as a Senior lead to Interface with equipment In-Service Engineering Agencies (ISEA), Combat Systems Engineering Agents (CSEA) and Software Support Activities (SSA) as required.\n Minimum Qualifications • 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field., • Client experience requirements: Between 6 to 15 years of relevant experience., • Client education requirements: BA/BS degree in Engineering, Information Technology, Computer Science, or a relevant field; Candidate must have an undergraduate degree from an ABET accredited program., • 4 years of additional equivalent experience can be substituted for a BA/BS degree., • Ability to obtain and maintain a Secret Security Clearance., • Experience resolving interface design problems., • Experience in resolving element, multi-element, and weapon or combat system hardware, interface, and interoperability issues., • Experience with components and systems interface through cables., • Experience with selecting cable types, understanding of cabling that is approved for shipboard use and the standards and requirements for shipboard cabling with respect to interface of electrical/electronic component, and development of cable run sheets in addition to cable/connector selections based on interface requirements., • Strong analytical and problem-solving abilities., • Excellent written and verbal communication skills., • Ability to work effectively both independently and as part of a team., • A proactive and eager-to-learn attitude.\n Preferred Requirements • An active Secret Security Clearance., • Experience with interface management in highly regulated environments (e.g., defense/naval, nuclear, offshore).\n HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Requisition Number: 25224 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $80,298.00 - $97,905.60 Security Clearance: Ability to Obtain Level of Experience: College This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are HII Mission Technologies is seeking a skilled and experienced Power CAD Engineer to join our team. In this role, you will be responsible for the design, modeling, and analysis of electrical power systems and components for various defense and government projects. You will use Computer-Aided Design (CAD) software to create detailed schematics, layouts, and drawings for power distribution, control systems, and related electrical infrastructure. The ideal candidate will have a strong background in electrical engineering principles and be proficient in industry-standard CAD tools. This position is contingent upon contract award. What You Will Do • Works closely with design originators preparing drawings of unusual, complex or original design., • Prepares drawings, which require a high degree of precision., • Performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise., • Assures that anticipated problems in manufacture, assembly, installation and operation are resolved by the drawing produced., • Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent., • Provides advice, guidance, and instruction to drafters., • May serve as primary point of contact for complex drafting projects., • Ability to prepare a complete drawing package without supervision., • Calculates Weight and Moments changes as a result of drawing., • Calculates electrical loads or heat loads for specific drawing and provide proper breakers, cable type/size or heat exchanger for requirements., • Selects proper material for structural members., • Assists Electrical/Mechanical engineers for stress/electrical/mechanical calculations., • Revises drawings to reflect As-Installed Conditions., • Ability to utilize World Wide Web for research., • Ability to research existing conditions and where to find that information.\n What You Must Have • 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field. 4 years of additional equivalent experience can be substituted for a BA/BS., • Candidate must be a recent graduate with a Bachelor's of Science degree in Engineering or graduating college senior who is in good academic standing and pursuing a Bachelor's degree in Engineering. Bachelor's of Science Degree in Engineering from an ABET accredited program is required prior to starting employment., • Candidate must have the ability to lead Site Visits to vessels and shore sites to gather technical data for drawing development., • Candidate must be completely knowledgeable with all tools of the trade (CAD program, rulers, compass, divider, calculator etc.) and complete knowledge of drafting and design standards., • Candidate must be proficient with at least one electrical CAD software package (e.g., AutoCAD Electrical, SolidWorks Electrical, or similar)., • Candidate must have a strong understanding of electrical and electronic components, circuits, and systems., • Candidate must have knowledge of industry standards for electrical drawings and schematics., • Candidate must have excellent attention to detail and a high level of accuracy., • Candidate must have strong communication and teamwork skills., • Candidate must be able to obtain and maintain a Secret Clearance.\n Bonus Points For Having! • Thorough knowledge of Model Space/Paper Space techniques, • Complete understanding of Weight Group assignments for Ships Systems and manual for BSCI/ESWBS grouping.\n Physical Requirements Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances during site surveys. Lifting and moving of materials not to exceed the guidelines set for one man lift. Must be able to perform site surveys and carry a lap top computer. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced Senior Engineering Technician to join our team in Norfolk, VA. Position Responsibilities: \n • Shipboard tag-out, WAF programs and applicable Naval procedures / instructions.\n, • Knowledge of OSHA safety practices.\n, • Read and interpret blueprints, sketches, written technical instructions and manuals.\n • US Citizenship., • Must be able to obtain and maintain active Secret Security Clearance and Base Access; Candidates currently possessing an Active Secret Clearance are preferred., • High School Diploma or, • GED. With Military "A" or "C" school(s), completion of a vocational, maritime, or journeyman training program., • Display knowledge of maritime mechanical systems., • Possess understanding of shipboard mechanical machinery equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics., • Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc., • Ability to read and interpret blueprints, sketches, written technical instructions and manuals, make red-line drawings, and design recommendations. • Three (3) years' experience in the development and updating of engineering operational procedures and diagrams utilizing ISODRAW and Adept Editor software (or equivalent) to incorporate required changes into existing operational procedures and diagrams for in-service ships and generate new operational procedures and diagrams for new acquisition ships in SGML and CGM formats (or equivalent) and conversion to PDF.\n • Minimum of Six (6) years' experience including practical engineering experience which should include the operation, test, maintenance, and repair of naval ship Hull, Mechanical, Electrical, Electronic, Ordnance equipment and systems., • Pay is based on experience., • Valid U.S. Driver's License., • Must pass drug screening as a condition of employment., • Candidates must furnish their own hand tools required for this position., • Candidates must be willing to travel, CONUS & OCONUS at times. Preferred skills: • Ability to develop and update engineering operational procedures and diagrams utilizing ISODRAW and Adept Editor software (or equivalent), • Prior military experience directly related to the position or prior experience in the Maritime Industry preferred., • Knowledge of Shipboard Engineering Space Systems Engineering operational procedures (EOP), Engineering operational casualty control (EOCC), Master casualty response procedure (MCRP), Master emergency plant procedure (MEPP), & Other Operational Sequencing System., • Knowledge of Shipboard electrical and electronic systems. Position located in Chesapeake, Virginia. Apply online at: Hourly wage is $25.00 - 32.00 based on experience. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Experienced ventilation designer in US Navy ship alteration work, primarily supporting habitability and other HM&E projects. LOCATION: Norfolk, VA RESPONSIBILITIES: • Conduct detailed shipchecks to support habitability and other HM&E overhauls., • Utilize technical libraries and ship drawing indexes to identify, locate and interpret as-built drawings., • Create precise ship installation drawings (SIDs) adhering to NAVSEA standards and quality procedures, based on collected shipcheck data and existing documentation., • Minimum of 5 years' experience in U.S. Navy shipboard ventilation systems design., • Proficient with AutoCAD; familiarity with other CAD or 3D modeling software (Inventor, SolidWorks, etc.) is a plus., • Self-motivated with a strong ability to work both independently and within a team to meet project deadlines., • Excellent communication, interpersonal, problem-solving, analytical, and organizational skills., • U.S. Citizenship required., • Must qualify for or currently hold Secret Clearance., • Ability to travel (up to 25%) as required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Exempt Req Number ENG-25-00009 This position is currently accepting applications.

Overview The Rescue 21 system is a Command, Control, and Communications mission critical system that provides dual mode (digital and analog) VHF, UHF and DSC communications. It was designed to utilize technology to accurately locate the source of maritime distress calls. The Rescue 21 system consists of three separate variants: Coastal, Western Rivers and Alaska. The Field Engineer reports to the Rescue 21 Project Manager and will perform assignments that will perform assignments that directly and indirectly support all tasks to maintain the Coast Guards Rescue 21 system to meet all performance specifications. Performs routine, non-routine and complex assignments involving responsibility for planning and conducting day to day operations in the sustainment of 57 sites geographically dispersed throughout the center of the country. Performs complex assignments involving responsibility for planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project. Selects and adapts plans, techniques, designs, or layouts. Contacts personnel in related activities to resolve problems and coordinate the work; reviews, analyzes, and integrates the technical work of others. Supervisor or professional engineer outlines objectives, requirements, and design approaches; completed work is reviewed for technical adequacy and satisfaction of requirements. Alone, or in a team environment, perform or support installation, testing, verification, repair, diagnostic analysis, and calibration of various systems. Provide organizational, intermediate, and depot level troubleshooting and support of fielded systems. May train and be assisted by lower level technicians. Performs at this level one or a combination of such typical duties as assigned. MAJOR DUTIES AND RESPONSIBILITIES: • Possibly lead a team of 3 to 5 indiviuals in the system development, testing, installation and or integration for Rescue 21 Western River sites or on board US Coast Guard Boats and Cutters., • Designs, develops, and constructs major units, devices, or equipment; conducts tests or experiments; analyzes results and redesigns or modifies equipment to improve performance; and reports results., • Performs and supervise others in the installation/removal/upgrades for electrical/electronic/C4I tasks. (i.e. wiring of terminal boxes, testing and verifying connections, meggering cables, testing and troubleshooting, etc.), • Analyzes technical data to determine applicability to design problems; selects from several possible design layouts; calculates design data; and prepares layouts, detailed specifications, parts lists, estimates, procedures, etc. May check and analyze drawings or equipment to determine adequacy of drawings and design., • Performs system testing to evaluate performance and functionality., • Operates tools to aide in fabricating, installing, removing, upgrading tasks., • Uses drawings, technical manuals, instructions, standards, and specifications to perform system installation/removal/upgrade activities, • Perform cableways, connectors (trainee), fire watch, confined space, and may have some special quals (i.e.: Fiber Handler, Shipyard Competent Person, Paint sampling, etc.)., • Understands the scope of work (i.e.: electrical - wiring a terminal box, test and verify connection, meggering a cable, etc.)., • Read and interpret installation drawings and cable run sheets. Fabricate various connectors by soldering and/or crimping for navigation, communication and power equipment., • Diagnoses and isolates equipment and system malfunctions which fail to respond to standard corrective measures., • Constructs components, subunits, or simple models or adapts standard equipment. May troubleshoot and correct malfunctions., • Follows specific layout and scientific diagrams to construct and package simple devices and subunits of equipment., • Conducts various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement; selects, sets up, and operates standard test equipment and records test data., • Extracts and compiles a variety of engineering data from field notes, manuals, lab reports, etc.; processes data, identifying errors or inconsistencies; selects methods of data presentation., • Assists and at times supervises a team in design modification by compiling data related to design, specifications, and materials which are pertinent to specific items of equipment or component parts. Develops information concerning previous operational failures and modifications. Uses judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information. Perform annual RFF Physical Site Inspections using an inspection checklist and digital cameras, one with a zoom lens., • Identify and correct site facility deficiencies to include performing housekeeping and maintaining HVAC, locks and doors, electrical and lighting, grounding components and cable and building weatherproofing., • Complete Site Inspection document using Word application to include inserting required photos., • Perform Tower and Antenna System Inspection (TASI) reviews to include 1) analyzing inspection results and photos to develop an accurate evaluation of the antenna system, 2) completing an inspection report to include inserting required photos, 3) creating a TASI Discrepancy spreadsheet and 4) completing a repair report to include inserting required photos., • Identify changes in equipment and site configurations and edit existing as-built drawings using TurboCAD, Visio and Excel applications. REQUIRED SKILLS: Experience, Education and Licensure: • Must be a US citizen and possess or be able to obtain/maintain a SECRET clearance., • Bachelor's Degree or 2 years relevant Rescue 21 or ELMR Engineering experience., • High School diploma, 10 years experience in US Coast Guard or US Navy C4I system installation integration and engineering support, US Coast Guard prefered., • Or High School diploma, US Coast Guard or Navy "C" or "A" school 8 years experience in US Coast Guard or US Navy C4I system installation integration and engineering support, US Coast Guard prefered. Knowledge, Skills & Abilities: • Must be highly organized and have excellent oral and written communication skills in order to interface with personnel and other government agencies at all levels., • Ability to lead a team installing systems and equipment geographicly dispersed around the country., • Ability to handle multiple tasks simultaneously., • Ability to communicate effectively orally and in writing., • Must be able to understand and interpret Engineering drawings., • Must demonstrate thorough knowledge of Microsoft applications (MS Word, PowerPoint). Solid Excel experience is a must., • Work in the kneeing position and layout of cable runs that are under false decking., • Carry 50lbs. The employee can be lifting 25lbs to 50lbs 5 - 10% of the day, carrying 10 to 40lbs throughout the ship 25 to 50% of the day or pushing and pulling while running cable or installing equipment up to 80% of the day., • Be on their feet in a standing, crouching or walking position up to 90% of the day., • Ability to work independently., • Ability to Travel between 25% annually. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential functions may require maintaining physical condition necessary for frequently bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with the opportunity to move about. Occasionally there may be a need to move or lift moderately light items up to 50 pounds. Near visual acuity to review written documentation; ability to hear and understand speech at normal room levels and on the telephone; lift horizontally and vertically. Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system. The noise level in the work environment is usually moderate. SUPERVISORY RESPONSIBILITIES: Supervise teams of up to 3 people. ADDITIONAL QUALIFYING FACTORS: Must have the ability to obtain and maintain a secret security clearance. In addition, a satisfactory background screening, negative drug test, positive references and proof of identity and legal authorization to work in the United States and for TFSI are required. The Tatitlek Corporation gives hiring, promotion, training and retention preference to Tatitlek shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. As an equal opportunity employer, The Tatitlek Corporation recognizes that our strength lies in our people. Discrimination and all unlawful harassment, including sexual harassment, in employment is not tolerated. We encourage success based on our individual merits and abilities without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, marital status, citizenship status, military status, protected veteran status or employment. Salary $75-90k/annually

Epsilon Systems is seeking a full time Welder Specialist (Hyperbarics) in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 5 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to obtain and maintain a Secret security clearance\n, • Ability to travel.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

MARINE PIPEFITTER - SUPERVISOR LOCATIONS: NORFOLK NAVAL SHIPYARD (NNSY) PORTSMOUTH NAVAL SHIPYARD - KITTERY, ME Mills Marine and Ship Repair, LLC (Mills Marine) is currently seeking an individual to support Touch Labor at Norfolk Naval Shipyard (NNSY) Clearance Requirement: Must be a US citizen with a DOD final Secret security clearance. Essential Functions and Responsibilities: 1. Have the ability to read and interpret and apply blueprints., 2. Have the ability to perform shop mathematical calculations involving geometry to lay out angles, arcs and circles., 3. Be capable of inspecting, testing and removing, installed piping and associate valves, hardware and hangers., 4. Have knowledge of how equipment and systems are installed and operated as well as the ability to plan work, layout and modify or repair new and/or existing valves and piping, 5. Have knowledge of brazing procedures and how various metals and alloys of steel, high-strength alloy steels, aluminum, cast iron, nickel, monel, brass, copper, bronze react to different brazing processes and techniques., 6. Shall be capable of installing, repairing or modifying high- and low-pressure water, steam, gas, oil, or other high- and low-pressure pipes or fitting., 7. Shall be possess the knowledge, skills, and abilities to fabricate and assemble various piping systems (P-1, P-2, & P-3 as defined in S9074-ARGIB-010/278) of differing metal which includes cutting, bending, shaping, alignment, and mounting of piping systems on U.S. Naval Surface Ships and Submarines., 8. Shall be trained and qualified to the workmanship requirements for piping installation and fit up as prescribed in Welded Joint Design (MIL-STD 22D), Requirements for Fabrication Welding and Inspection, and Casting Inspection and repair for Machinery, Piping and Pressure Vessels {S9074-AR-GIB-010/278), NAVSEA Standard Item 009-12, and NSTM Chapter 505. • End prep and fit-up for a P-14 socket joint, fit-up one joint in accordance with the S9074AR-GIB-010/278 to demonstrate the knowledge and ability to accomplish the work-specific in the contract SOW. During end prep and fit-up, the personnel will produce a P-14 joint that meets the requirements of the S9074-AR-GIB-010/278. \n, • Measure: must be able to perform the measurements of inside and outside diameters, socket depth, and put out (withdrawal) for sockets using micrometers, dial calipers, and a six-inch depth, along with scribe lines, reference lines.\n, • Operate: must have knowledge and skills to operate pneumatic grinders.\n The Supervisor position requires a minimum of a high school diploma and/or successful completion of a related trade or industrial school. Experience: The Supervisor position requires 5 years of verifiable experience as a supervisor in heavy industrial applications i.e., commercial vessels or nuclear power plants, which shall include a minimum of two (2) years' work experience on U.S. Navy ships/vessels. Trade Training: Completed a formal course of study in the assigned trade through either a community college, technical or trade school, military training, formal company training program or an apprentice program. Must be trained in typical trade-related precision measurement instruments, such as micrometers, depth gauges and calipers while performing close tolerance work. Trade Specific Technical Standards: MIL-STD-22D, S9074-AR-GIB-010/278, NAVSEA Standard Item 009-12, NSTM chapter 505 Required Trade Training: Assembly & Inspection of Flareless Fittings, Flange Joint Makeup, Union Joint Makeup, Hanger Installation, Precision Measurement Instruments and Torque Wrench Usage. Trade Skills: 1. Capable and knowledgeable of troubleshooting/testing various electrical, systems, circuits, controls, instruments and equipment, onboard Navy ships/vessels to include submarines and/or ship's components and able to document test requirements., 2. Knowledge and ability to proficiently use various types of electrical and electronic measuring devices that include voltmeters, amp meters, ohmmeters, power analyzers, as well as possess the ability and knowledge to disconnect /reconnect and perform Initial Voltage Verification of electrical equipment., 3. Working knowledge of electrical trade mathematics and formulas to calculate voltage, amperes and resistance requirements and to determine size and types of material, including controls, switches, distribution panels, fuses, cable and conduit size when determining appropriate power source., 4. Working knowledge of electrical trade mathematics and formulas to calculate voltage, amperes and resistance requirements and to determine size and types of material, including controls, switches, distribution panels, fuses, cable and conduit size when determining appropriate power source., 5. Ability to read and interpret blueprints, sketches, written technical instructions and manuals, make working diagrams, circuits, electrical systems, circuits, circuits, circuits, circuits, controls, instruments and equipment. This position description represents a summary of the major components and requirements of the outlined job. Other duties and responsibilities may be assigned or required as business needs dictate. Questions regarding this description should immediately be addressed to the department manager or to Human Resources. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Mills. Benefits are subject to employment eligibility. Benefits: Full-time employment • Paid accrued vacation time., • Health, dental, and vision insurance, • Company-paid life and accidental insurance with Supplemental Coverage Option as well, • Legal Resource benefit, • 401K Plan, • 11 Company Paid Holidays Mills Marine is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Mills Marine is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment.

Epsilon Systems is seeking a full time Pipefitter II in Portsmouth, VA. Position Summary Reads and interprets blueprints and sketches to repair, modify, install and dismantle various pipes and fittings associated with shipboard hydraulic, pneumatic and water systems. Performs fabrication, assembly and testing of piping systems and components. Requires little to no supervision. Responsibilities \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will report to an individual designated by the Foreman. These responsibilities include but are not limited to the following:\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.\n, • Returns tools/equipment checked out from the Tool Room to proper location and reports lost, stolen, missing or damaged items to the Facilities Foreman in accordance the Process Instruction.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to piping systems and components (e.g.; valves, compressors, reducers, filters etc.).\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).\n, • Performs intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Layouts material prior to performing pipe bending operations and machine parts to achieve proper joint design as per Technical Work Documents.\n, • Fabricates and installs intermediate/complex fixtures, jigs, supports and targets to ensure proper alignment during the welding process.\n, • Produces quality piping assemblies, in difficult or adverse conditions and is proficient in brazing.\n, • Performs flushing/cleaning of piping systems and components in accordance with TWD.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate, and/or military and/or civilian experience with marine piping systems in a repair department or shipyard.\n, • 5 years' experience.\n, • Must have the ability to obtain and maintain government base access and private shipyard access.\n, • Must be able to understand and perform intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Must have intermediate knowledge and understanding of shipboard piping systems (repair/ installation practices, procedures, pipe bending, alignments and troubleshooting) and blue print reading.\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Must be qualified in multiple brazing processes.\n, • Able to work outside of trade.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Select proper materials and requirements to perform welding functions. Fabricate and install fixtures and jigs required for welding process alignments. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires no supervision/oversight. Has experience in the trade qualifications and can perform all work required as a Welder and will provide mentoring to junior craftsman. \n, • Must be able to understand and perform the set-up, adjustment, and operation of various welding equipment and hand tools used in the trade. Select welding filler material, joint design and proper heat ranges as directed by Technical Work Documents. \n, • Read and understand terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process. \n, • Fabricate and install fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop. \n, • Must have the ability to obtain government base access. \n, • Knowledge and practical skills tests required. \n, • Qualify as a Welder/Workmanship Inspector in accordance with OII Process Instructions and welding procedures.\n, • Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. Automated welding processes.\n, • Must be able to obtain a Secret/Confidential security clearance.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night\n, • Frequently working on or near moving equipment and vibrating equipment\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels\n, • Light is intense/glare\n, • Occasional exposure to open fire/flames/sparks\n, • Frequent exposure to airborne dust, fumes, and gases\n, • Includes exposure to contaminants\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable\n, • Job tasks are performed in close physical proximity to other people\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Project Engineer has mastery of at least one core engineering principle and advanced knowledge of related engineering fields. The Project Engineer independently directs and technically manages engineering and design activities under the guidance of a Project Manager, and is responsible for tracking progress and technical adequacy of the design solution. The Project Engineer interacts with all ADTECH departments as necessary to provide engineering support to ADTECH manufacturing, integration, and test activities, and provides work leadership for lower level employees. Duties And Responsibilities ESSENTIAL \n • Develop and apply advanced engineering analytical and design methods, theories and research techniques, to complex engineering projects.\n, • Coordinate and supervise a team of engineers, designers, drafters, technical writers, and technicians.\n, • Review progress and evaluate results of work accomplished by self and others.\n, • Technically manage projects of moderate scope.\n, • Estimate resource requirements to meet technical and scheduling objectives.\n, • Review and approve the completion and implementation of technical products to meet the customer requirements.\n, • Demonstrate excellent technical judgment, independent evaluation and innovative solutions to problems.\n, • Write test procedures, conduct tests, compile and evaluate test data, and complete required documentation.\n, • Interact with customer representatives to define and manage customer expectations.\n, • Participate in Technical Working Groups to assess and improve ADTECH processes and capabilities.\n, • Assist in bid and proposal efforts by providing cost estimations, technical approach definitions, and input to baseline schedule data.\n, • Domestic and international travel, including shipboard operations.\n REQUIRED \n • Bachelor of Science degree in Mechanical Engineering or Equivalent experience, from an accredited institution.\n, • 5-10 years of practical technical experience in the engineering process, including concept development, analysis, design, drawing, integration and testing of complex mechanical and/or ocean deployed systems.\n, • 2 or more years of management experience leading multidisciplinary design teams.\n, • Responsible for producing significant portions of individual project mechanical designs\n, • Demonstrated ability to lead technical groups and interact with customer representatives.\n, • Proficiency in the application of current engineering software (i.e. SolidWorks, ANSYS, Matlab, etc), and Microsoft Office\n, • Able to apply an advanced knowledge of the principles, practices and procedures of mechanical engineering and an understanding of related engineering fields.\n, • Work closely with electrical, software, and systems engineers, as well as other cooperative disciplines, to solve problems and constructively architect a working system.\n, • Responsible and accountable for your results, working with considerable autonomy, but also knowing when to ask for assistance.\n, • Ability to obtain a United States Government Department of Defense Security Clearance (active clearances preferred, but not prerequisite)\n, • Must be a US Citizen.\n, • Desire to stretch and expand your talents, expertise, competency, and responsibilities.\n\n DESIRED \n • Advanced degree in Mechanical Engineering, Ocean Engineering or a related field, from an accredited institution.\n, • Exercise excellent technical judgement, creativity, and initiative with attention to detail consistently throughout your work product, with awareness of the "system" perspective.\n, • Strong communication, organizational and technical writing skills, including ability to effectively document, convey, and present engineering concepts and products to team members and customers.\n, • Knowledge and/or experience in the marine industry, fielding Ship Board systems and associated technologies.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Epsilon Systems is seeking a full time Pipefitter III in Portsmouth, VA. Position Summary Reads and interprets blueprints and sketches to repair, modify, install and dismantle various pipes and fittings associated with shipboard hydraulic, pneumatic and water systems. Performs fabrication, assembly and testing of piping systems and components. Requires little to no supervision. Responsibilities: \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will report to an individual designated by the Foreman. These responsibilities include but are not limited to the following:\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.\n, • Returns tools/equipment checked out from the Tool Room to proper location and reports lost, stolen, missing or damaged items to the Facilities Foreman in accordance the Process Instruction.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to piping systems and components (e.g.; valves, compressors, reducers, filters etc.).\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).\n, • Performs intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Layouts material prior to performing pipe bending operations and machine parts to achieve proper joint design as per Technical Work Documents.\n, • Fabricates and installs intermediate/complex fixtures, jigs, supports and targets to ensure proper alignment during the welding process.\n, • Produces quality piping assemblies, in difficult or adverse conditions and is proficient in brazing.\n, • Performs flushing/cleaning of piping systems and components in accordance with TWD.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate, and/or military and/or civilian experience with marine piping systems in a repair department or shipyard.\n, • 8 years' experience.\n, • Must have the ability to obtain and maintain government base access and private shipyard access.\n, • Must be able to understand and perform intermediate set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Must have intermediate knowledge and understanding of shipboard piping systems (repair/ installation practices, procedures, pipe bending, alignments and troubleshooting) and blue print reading.\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Must be qualified in multiple brazing processes.\n, • Must be able to work outside of trade\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Ghostrock, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an Engineer III to join our team in Norfolk, VA. Position Responsibilities: \n • Assigned to US Navy ship's Maintenance Teams as the engineering point of contact to resolve technical issues during planning and execution of ship's maintenance availabilities.\n, • Perform technical services, monitoring and reporting during Chief of Naval Operations (CNO) availabilities planning and execution.\n, • Perform technical services, monitoring and reporting during Continuous Maintenance Availabilities (CMAV).\n, • Perform technical services, monitoring and reporting in support of deployment, assessment, and Board of Inspection and Survey (INSURV) events.\n, • Perform engineering/data analysis in support of modernization, assessment, maintenance or repair of surface ship equipment.\n, • In accordance with the JFMM, monitor technical authority compliance during planning and execution of surface ship maintenance, assessment, repair, and modernization work.\n, • Using computer-based tools, provide technical and status reports that are factually accurate and complete, reflect high quality, adhere to due dates and deadlines, be innovative and use techniques to increase efficiencies and control cost.\n, • Must be a U.S. Citizen \n, • Must be able to obtain an Active Secret Clearance\n, • Require engineering degree from an accredited college or university. Graduates of Maritime Universities are highly desirable.\n, • GPA of 2.5\n, • Must show skill in Microsoft Office Suite.\n\n This position is located in Norfolk, VA. Please apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a diverse, team-oriented working environment and the opportunity to work with exceptional dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, religion, creed, gender, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Technical Editor/QA - Sr Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: None Employee Type: Regular Percentage of Travel Required: None Type of Travel: None The Opportunity: Responsible for proof-reading, editing, and testing training products developed for the Sailor 2025 Ready Relevant Learning (RRL) program. Responsible for reviewing/editing Training Guides, Lesson Plans, online content, and testing PC Simulations. Assist in collecting and organizing information supporting manuals and training materials. Responsibilities: Review Government Furnished Information Review and test all training materials developed by the Instructional Designers and Software Developers Support team meetings and provide technical guidance Work in a fast, dynamic environment Qualifications: Required: Expertise with Microsoft Products. Prior experience working with a training team reviewing and testing curriculum content. Excellent written and verbal communication skills Strong attention to detail and solid analytical and problem-solving skills Self-motivated and able to work independently as well as in team environments Desired: Prior experience reviewing content for Sailor 2025 RRL projects. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $61,600-$129,300 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Requisition Number: 25196 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $78,897.00 - $96,657.60 Security Clearance: Ability to Obtain Level of Experience: College This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are We are seeking a talented and experienced Cooling Engineer to join our mechanical engineering team. This role is crucial for the design, analysis, and integration of complex cooling systems for various naval and defense platforms. The ideal candidate will have a strong background in thermodynamics, heat transfer, and fluid dynamics, with hands-on experience in designing and testing cooling solutions. This position is contingent upon contract award. What You Will Do • Performs engineering functions in one or more of the following specialties: electronics, electrical, mechanical, civil, naval, and/or chemical., • Receive and perform assignments involved in the analysis, design, integration, testing, installation, operation, product support, and maintenance of the Aegis auxiliary cooling systems and components, • Ensure proper activation and operation of the cooling systems supporting the Aegis Combat System (ACS) infrastructure including safety processes, diagnostic test procedure review, crew training and trials support, configuration and its interface/relationships with shipboard auxiliary equipment, • Configure, and operate temporary convection-type cooling systems to support Aegis Combat System testing, • Support Aegis auxiliary equipment configuration and operation supporting the testing and employment of the ACS, • Identify, report, and assist in the resolution of cooling equipment operational and configuration issues, • Ensure demineralized water, ship's chilled water, & sea-water supply service pumps, Electronic Cooling Water skids, SPY Sea Water Cooling skids, heat exchangers, cooling water air-removal systems, air handling units, and supporting piping configurations are operational and available to support Aegis Combat System operation and coordinate with the senior cooling engineer for cooling related matters, • Work as a team member to complete customer deadlines which may have competing/shifting priorities, • Document test procedure discrepancies for future revision\n What You Must Have • 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field. 4 years of additional equivalent experience can be substituted for a BA/BS., • Candidate must be a recent graduate with a Bachelor's of Science degree in Engineering or graduating college senior who is in good academic standing and pursuing a Bachelor's degree in Engineering. Bachelor's of Science Degree in Engineering from an ABET accredited program is required prior to starting employment., • Candidate must have a strong understanding of thermodynamics, fluid mechanics, and heat transfer principles., • Candidate must have experience with 3D CAD software (e.g., SolidWorks, Inventor)., • Candidate must have the ability to work in a fast-paced, collaborative team environment., • Candidate must have the ability to obtain and maintain a security clearance.\n Bonus Points For Having! • Experience with cooling systems for naval platforms or defense electronics., • Familiarity with military and marine standards (e.g., MIL-STD, ABS, etc.)., • Experience with system-level modeling and simulation tools., • Active security clearance.\n Physical Requirements Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. Lifting and moving of materials not to exceed the guidelines set for one man lift. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Epsilon Systems is seeking a full time Welder III for the Ship Repair Sector located in Portsmouth, VA. Position Summary Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 5 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Must be qualified in a minimum of 15 welding/brazing processes to include flux core welding.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to obtain and maintain National Security Clearance Level Secret.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Requisition Number: 25223 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $80,298.00 - $97,905.60 Security Clearance: Ability to Obtain Level of Experience: College This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are HII Mission Technologies is seeking a skilled Mechanical CAD Engineer to design and develop mechanical systems, components, and products. This role requires expertise in Computer-Aided Design (CAD) software to create detailed 2D and 3D models and drawings. The ideal candidate will work with a team of engineers and project managers to ensure designs meet technical specifications, budget, and timeline requirements. This position is contingent upon contract award. What You Will Do • Works closely with design originators preparing drawings of unusual, complex or original design., • Prepares drawings, which require a high degree of precision., • Performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise., • Assures that anticipated problems in manufacture, assembly, installation and operation are resolved by the drawing produced., • Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent., • Provides advice, guidance, and instruction to drafters., • May serve as primary point of contact for complex drafting projects., • Ability to prepare a complete drawing package without supervision., • Calculates Weight and Moments changes as a result of drawing., • Calculates electrical loads or heat loads for specific drawing and provide proper breakers, cable type/size or heat exchanger for requirements., • Selects proper material for structural members., • Assists Electrical/Mechanical engineers for stress/electrical/mechanical calculations., • Revises drawings to reflect As-Installed Conditions., • Ability to utilize World Wide Web for research., • Ability to research existing conditions and where to find that information.\n What You Must Have • 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field. 4 years of additional equivalent experience can be substituted for a BA/BS., • Candidate must be a recent graduate with a Bachelor's of Science degree in Engineering or graduating college senior who is in good academic standing and pursuing a Bachelor's degree in Engineering. Bachelor's of Science Degree in Engineering from an ABET accredited program is required prior to starting employment., • Candidate must have the ability to lead Site Visits to vessels and shore sites to gather technical data for drawing development., • Candidate must be completely knowledgeable with all tools of the trade (CAD program, rulers, compass, divider, calculator etc.) and complete knowledge of drafting and design standards., • Candidate must be proficient with at least one electrical CAD software package (e.g., AutoCAD Electrical, SolidWorks Electrical, or similar)., • Candidate must have a strong understanding of electrical and electronic components, circuits, and systems., • Candidate must have knowledge of industry standards for electrical drawings and schematics., • Candidate must have excellent attention to detail and a high level of accuracy., • Candidate must have strong communication and teamwork skills., • Candidate must be able to obtain and maintain a Secret Clearance.\n Bonus Points For Having! • Thorough knowledge of Model Space/Paper Space techniques, • Complete understanding of Weight Group assignments for Ships Systems and manual for BSCI/ESWBS grouping.\n Physical Requirements Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances during site surveys. Lifting and moving of materials not to exceed the guidelines set for one man lift. Must be able to perform site surveys and carry a lap top computer. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Pipe Shop (Shop 56). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed.\n, • You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and steam systems.\n, • You will mentor, train and instruct Pipe Shop employees in a wide range of pipefitting duties.\n, • You will inspect completed and in progress work for quality of workmanship and adherence to requirements, specifications, standards, plans, and schedules.\n, • You will perform maintenance, repairs, troubleshooting, installation, modification and testing in the shop and onboard ships.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position requires work in confined spaces.\n, • This position requires rotating shift work.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a QA & NDT Level II Technician to support our operations on Navy contracts, with a focus on Quality Assurance activities in Chesapeake, VA. Position Responsibilities: \n • Manage and support QA activities related to Navy contracts, ensuring full compliance with Navy specifications (e.g., MIL-STD, NAVSEA, MIL-PRF) and other relevant industry standards.\n, • Conduct detailed inspections and audits of products, processes, and systems in accordance with military standards, ensuring the adherence to quality specifications and requirements.\n, • Review and analyze technical documentation, blueprints, and engineering drawings to assess compliance with project requirements and quality standards.\n, • Develop and review quality control procedures for naval projects, ensuring all quality metrics, tests, and inspections meet the specific standards for Navy contracts.\n, • Collaborate with Navy engineers, contractors, and subcontractors to ensure effective communication and alignment with quality expectations for all deliverables.\n, • Ensure all materials, components, and systems meet the stringent military-grade quality requirements for operational readiness and long-term reliability.\n, • Monitor and track non-conformances, initiating corrective actions to address quality issues and ensuring compliance with Navy regulations.\n, • Lead quality reviews and inspections of materials, systems, and processes used in shipbuilding, submarine construction, and military equipment maintenance and repair.\n, • Oversee and assist with the preparation of quality assurance documentation including test plans, inspection reports, and final certification reports.\n, • Conduct root cause analysis and support continuous improvement initiatives to enhance quality assurance processes, mitigate risks, and optimize performance.\n, • Ensure the calibration and maintenance of all QA testing and inspection equipment in accordance with Navy and military standards.\n, • Perform supplier quality audits to ensure third-party vendors meet the necessary quality requirements for materials and components.\n, • Provide training and mentoring to junior QA personnel and assist in the development of quality assurance programs for Navy-related projects.\n, • US Citizen.\n, • Must be able to obtain and maintain an Active Secret Clearance; Candidates currently possessing an Active Secret Clearance are preferred.\n, • High School Diploma or Equivalent.\n, • QA experience with a focus on Navy contracts or military-related projects, ideally within shipbuilding, defense systems, or naval vessel maintenance.\n, • Minimum of 5 years of experience in a quality assurance role with hands-on experience in the defense industry.\n, • Familiarity with military standards, including NAVSEA, MIL-STD, and other DoD quality specifications.\n, • Strong understanding of quality management systems (QMS), ISO standards, and relevant industry codes (e.g., ASME, ASTM, API).\n, • Ability to interpret and evaluate engineering drawings and technical specifications to ensure quality compliance.\n, • Proficiency with QA software and reporting tools used for tracking non-conformances, inspections, and audit documentation.\n, • Knowledge of root cause analysis (RCA), failure mode analysis, and the corrective action process.\n, • Excellent written and verbal communication skills, including the ability to prepare technical reports and quality assurance documentation for Navy contracts.\n, • Ability to work independently and within a team to achieve military and project-specific quality objectives.\n, • Ability to work in shipyard environments, confined spaces, and other physically demanding settings typical of Navy-related projects.\n, • Ability to lift and carry equipment up to [insert weight].\n Apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Requisition Number: 25221 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $80,298.00 - $97,905.60 Security Clearance: Ability to Obtain Level of Experience: College This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are We're looking for a highly skilled HVAC CAD Engineer to join our team at HII Mission Technologies. In this role, you will be responsible for creating, modifying, and managing detailed engineering drawings and designs for HVAC systems using Computer-Aided Design (CAD) software. You'll work closely with project managers, engineers, and technicians to ensure all designs meet project specifications, industry standards, and regulatory requirements. This position requires strong technical proficiency, meticulous attention to detail, and the ability to work on multiple projects simultaneously in a fast-paced environment. This position is contingent upon contract award. What You Will Do • Works closely with design originators preparing drawings of unusual, complex or original design., • Prepares drawings, which require a high degree of precision., • Performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise., • Assures that anticipated problems in manufacture, assembly, installation and operation are resolved by the drawing produced., • Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent., • Provides advice, guidance, and instruction to drafters., • May serve as primary point of contact for complex drafting projects., • Ability to prepare a complete drawing package without supervision., • Calculates Weight and Moments changes as a result of drawing., • Calculates electrical loads or heat loads for specific drawing and provide proper breakers, cable type/size or heat exchanger for requirements., • Selects proper material for structural members., • Assists Electrical/Mechanical engineers for stress/electrical/mechanical calculations., • Revises drawings to reflect As-Installed Conditions., • Ability to utilize World Wide Web for research., • Ability to research existing conditions and where to find that information.\n What You Must Have • 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field. 4 years of additional equivalent experience can be substituted for a BA/BS., • Candidate must be a recent graduate with a Bachelor's of Science degree in Engineering or graduating college senior who is in good academic standing and pursuing a Bachelor's degree in Engineering. Bachelor's of Science Degree in Engineering from an ABET accredited program is required prior to starting employment., • Candidate must have the ability to lead Site Visits to vessels and shore sites to gather technical data for drawing development., • Candidate must be completely knowledgeable with all tools of the trade (CAD program, rulers, compass, divider, calculator etc.) and complete knowledge of drafting and design standards., • Candidate must be proficient with at least one electrical CAD software package (e.g., AutoCAD Electrical, SolidWorks Electrical, or similar)., • Candidate must have a strong understanding of electrical and electronic components, circuits, and systems., • Candidate must have knowledge of industry standards for electrical drawings and schematics., • Candidate must have excellent attention to detail and a high level of accuracy., • Candidate must have strong communication and teamwork skills., • Candidate must be able to obtain and maintain a Secret Clearance.\n Bonus Points For Having! • Thorough knowledge of Model Space/Paper Space techniques, • Complete understanding of Weight Group assignments for Ships Systems and manual for BSCI/ESWBS grouping.\n Physical Requirements Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances during site surveys. Lifting and moving of materials not to exceed the guidelines set for one man lift. Must be able to perform site surveys and carry a lap top computer. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.