Computer technician jobs in Jackson, MississippiCrear alertas

Overview: If you reside in California, please see our ___ for more information about our data handling practices and your data rights. Responsibilities: We are seeking an ASE Master Mechanic who will perform all needed maintenance and repairs on all fleet vehicles. The Mechanic is required to perform all other duties as required and needed. Experience working with Chevy models and Ford vehicles preferred. We Offer: • $1,500 Sign On Bonus, • Excellent pay rate, • 40 hours a week, not flat rate, • OT as needed over 40 hours, • Paid vacation, • Company provided uniform, • 401K plan available, • Benefits: Medical, Vision and Dental, • Corporate partner discount program, • Perform preventive maintenance inspections and repairs., • Assist and repair Drivers concerns on vehicles., • Air Conditioning diagnosis and repair., • To perform electrical diagnosis and repairs., • Perform diagnosis, service and repairs on heating and air conditioning systems., • Perform fluid and filter changes on Engine, Transmission, Differential, Cooling system, etc., • Perform vehicle computer diagnostics, using computer scanners and digital volt ohm meters., • Perform major engine components diagnosis and replacement, i.e. cylinder head, exhaust manifold, intake manifold, cam shafts etc., • Ford and/or GM experience a must. (light to medium duty vehicles), • Extensive knowledge in air brakes, both disc and drum set ups, • The Technician must have Master Tech certification, • Minimum eight (8) years of experience, • Must be able to diagnose CAN multiplex I/O electronic systems, • Automotive diagnostic experience a must., • Proficiency with 12/24 charging and starting system Possess ThermoKing climate control experience * Cummins and Allison Transmission experience • Diesel and gas experience, • Must have knowledge of DOT inspection standards and ADA . MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Installs intrusion, fire, CCTV, and access control security systems., • Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs., • Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements., • Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment., • Conducts tests to ensure all newly installed systems and component devices are operational., • Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • NICET Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive salary, • We offer incentive programs for turning in referral leads and quoting planned service agreements or L&M up to 6% payout of the sale value, • Paid vacation/holidays/sick time- 10 days of vacation first year, • Comprehensive benefits package including 401K, medical, dental, and vision care – Available day one, • Encouraging and collaborative team environment, • Dedication to safety through our Zero Harm policy, • Check us out!: ___ What you will do Under general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, Sales and Service team and subcontractors. How you will do it Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts, schedules and electrical schematics as required. Develops and tests software programs necessary to operate the system per customer facility requirements' intent. Coordinates and creates necessary drawings and equipment schedules for submittals, services and/or installation. Selects, orders, and tracks the delivery of materials for assigned jobs. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and solves problems with subcontractors and other trades to ensure proper operation. Provides field change information to the team for the creation of as-built drawings and software. Keeps management and JCI contractor and customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in coordination and release meetings with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction. May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians. Adheres to safety standards. High degree of regard to employee and subcontractor safety What we look for Required * Bachelor's degree in engineering and/or minimum Eight (8) years' experience * Demonstrated knowledge of the construction or service, or HVAC industry. * Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. * Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., LON, BACnet, etc.). * Ability to relate technical knowledge to a non-technical audience. Demonstrated advanced computer skills required, particularly computer-related drafting tools. HIRING HOURLY RANGE: $33-41 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at

Please note: Only 2nd shift (2pm-10:30pm) and 3rd shift (10pm-6:30am) Maintenance Technician positions available. No 1st shift Maintenance Technician positions available at this time. GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains. As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries. GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems. Culture: Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions. What we are looking for: Grammer is looking for a Maintenance Tech team member to join our location in Shannon, MS. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team! What you will be doing: This person is responsible for all facets of supporting the Automotive area and expertise in all aspects of industrial maintenance and performs skilled work in the installation, maintenance, and repair of mechanical and electrical equipment. • Responsible for all facets of supporting the automotive area and expertise in all aspects of industrial maintenance and performs skilled work in the installation, maintenance, and repair of mechanical and electrical equipment., • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment., • Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary., • Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools., • Operate mill, lathe, drill press and other machine shop tools to repair or fabricate machine parts, jigs, fixtures, or tools., • Inspect, operate, or test machinery or equipment to diagnose machine malfunctions., • Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and facilities., • Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists., • PLC troubleshooting experience., • Hydraulics and pneumatics troubleshooting and repair., • Troubleshoot, repair and perform preventive maintenance on mechanical and electrical equipment and machinery using standard and specialized hand/power tools and diagnostic equipment., • Install conduit and related hardware to power equipment, repair motor control systems and electrical equipment and replace light fixtures. What you will bring along: • High school diploma or equivalent required, • Minimum 2-4 years of related experience, • Automotive experience preferred, • Must have the ability to multi-task in a fast-paced environment, • Good written and verbal communication skills, • Detail oriented, • Excellent time-management skills with great attention to organization, • Excellent people skills, • Excellent computer skills in Microsoft Office with some knowledge of HRIS systems, • Ability to work effectively with all levels of management and large numbers of employees, • Flexible and adaptable in challenging situations. What we can provide you: • Medical, Dental, and Vision coverage eligibility on day 1, • Flex Spending Accounts, • Health Savings Account, • 401(k), • Volunteer Life Insurance options, • Critical Illness and Accident Insurance, • Tuition Reimbursement Programs, • Robust Employee Assistance Program Services, • Individualized Developmental Opportunities

Job Description At Paul Moak Automotive, we stand for integrity and quality in serving all of our customer's automotive needs. We strive to provide the best in customer service. We employ an experienced staff and we're looking to expand our team! Benefits Service Technician Benefits: * Full Medical Insurance * Dental Insurance * Health/Wellness Program * 401K Retirement Plan * Paid Vacation * Paid Sick Leave * Paid Holidays * Complimentary Saturday Lunches * Family Friendly Operating Hours * Employee Purchase Program * 12 Years Average Employee Tenure Responsibilities * Perform work specified on the repair order with efficiency and in accordance with dealership policies and procedures * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment * Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. * Communicate directly with the Service Advisor so that customers are well-informed of any additional services needed * Provide an estimate of time needed for additional repairs * Executing repairs under warranty to manufacturer specifications Qualifications * An eagerness to come in and work * ASE Certifications not required but appreciated * A-level qualifications, including Diagnostic, Electrical and Engine Repair * Broad knowledge of new vehicle technologies helpful * Ambitious, hardworking presence in a team environment * Customer service skills * Basic computer skills * Positive, friendly attitude, along with a customer service mentality * Ability to collaborate effectively * Ability to learn new technology, repair and service procedures and specifications * Able to operate electronic diagnostic equipment * Minimum high school diploma or GED equivalent * Valid driver's license and clean driving record We are an equal opportunity employer.

Job DescriptionExperienced/Certified Service TechnicianJackson, MS At Paul Moak Automotive, we stand for integrity and quality in serving all of your automotive needs. We are looking to add to our service team. Check out pictures of our shop, videos, pay plans, and hiring FAQ's at . Benefits Service Technician Benefits: * Blue Cross Blue Shield Medical Insurance * Dental Insurance * Health/Wellness Program * 401K Retirement Plan * Paid Vacation * Paid Sick Leave * Paid Holidays * 5 Day work week * Complimentary Saturday Lunches * Family Friendly Operating Hours * Employee Purchase Program * 12 Years Average Employee Tenure Responsibilities * Perform work specified on the repair order with efficiency and in accordance with dealership policies and procedures * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment * Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. * Communicate directly with the Service Advisor so that customers are well-informed of any additional services needed * Provide an estimate of time needed for additional repairs * Executing repairs under warranty to manufacturer specifications Qualifications * ASE Certifications not required but appreciated * A-level qualifications, including Diagnostic, Electrical and Engine Repair * Broad knowledge of new vehicle technologies helpful * Ambitious, hardworking presence in a team environment * Customer service skills * Basic computer skills * Positive, friendly attitude, along with a customer service mentality * Enjoy working in a dynamic environment * Ability to collaborate effectively * Ability to learn new technology, repair and service procedures and specifications * Able to operate electronic diagnostic equipment * Minimum high school diploma or GED equivalent * Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Automotive Technician in Jackson, MS! The Automotive Technician is responsible for the timely repair and maintenance of light to medium duty fleet vehicles to ensure a safe and efficient operation. Compensation: Competitive Hourly Pay: $25.00 - $30.00/Hour, depending on experience - Paid weekly, every Friday! Shift: Monday - Friday, 5:00am-1:30pm - Day Shift!!! The benefits of belonging – what’s in it for you? • Competitive hourly pay – paid weekly, every Friday, • Full benefits within 30 days, • Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • 401(k) match program, • Paid vacation, holidays, and sick time, • Commitment to your safety through boot and prescription safety glasses reimbursement, • Career and learning development with an extensive training program through our Amerit University, • Employee referral program, up to $1,000 bonus, • ASE certification program with fee reimbursement and bonus, • Employee recognition platform that includes opportunities to redeem points for merchandise, • Employee assistance program (EAP), • 24/7 nurse triage line, • Employee discounts on cell phone service and entertainment tickets, • Employee resource groups (ERGs) that foster inclusion, • Wellness and fitness program through our providers, • Prepare vehicle records and report both manually and on a computer, • Perform repairs and preventative maintenance to light and medium duty vehicles, • Perform safety inspections of equipment and prepare safety documentation required, • Comply with all applicable laws/regulations, as well as company policies/procedures, • Inspect and perform work on the under parts of vehicles, • Access any area of the equipment or vehicle to perform necessary maintenance, • Move parts to and from the job site and remove or install these parts on vehicles, • Interact with clients through both email and phone as necessary, • At least 5 years’ experience performing vehicle maintenance or must possess auto or diesel technology diploma from an accredited technical school, • Must have valid Driver’s License, • Proficient computer skills: knowledge of Excel, Word, Fleet Management Systems, and Email, • Strong written and verbal communication skills (documentation, communication with peers, supervisors, etc.), • Must be able to operate a manual transmission vehicle to determine if operating properly, • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants, • Access any area of the equipment or vehicle to perform necessary maintenance, • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles, • Ability to work outside in various weather conditions. Are you ready to advance your career as a Technician with Amerit Fleet Solutions? Apply Today! #HiringNow #AutomotiveTechnician #AutoTech #AmeritFleetSolutions #FleetMaintenance #MechanicJobs #AutoMechanic #AutomotiveCareers #NowHiring #MississippiJobs #JacksonMS #FleetTech #AutoRepair #VehicleMaintenance #LightDutyTech #MediumDutyTech #SkilledTrades #TechCareers #MechanicLife #JoinOurTeam #CareerGrowth #AmeritCareers #HiringInMississippi #DayShiftJobs #AutoJobs INDCD

Location: 2250 Boling St Jackson, MS, 39213 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Fleet Maintenance Fueler Washer at Penske, you’ll do exactly that. You will make sure vehicles are fueled, clean and safe before they hit the road again. You will be the face of Penske—the person greeting our customers when they arrive and the one sending them off with a smile. Why join Penske as a Fleet Maintenance Fueler Washer, you ask? It’s simple. Maybe you’ve always had an interest in vehicle maintenance but haven’t had the chance to pursue it. This is the perfect place to start. No experience is required. We will introduce you to our vehicle maintenance processes. We will teach you how to use our leading-edge technology. In fact, the training and experience you get here will help you advance to become a technician. And you’ll get to do that learning at a company that offers career stability and competitive benefits. Talk about an amazing opportunity. It’s about going above and beyond for our customers—the way Penske goes above and beyond for you. It’s about building meaningful relationships. It’s about keeping our customers moving forward. Main Responsibilities: • Greeting our customers and making sure they have a great experience as you fuel and wash vehicles, • Performing vehicle readiness inspections to make sure tires, fluids, and other basic maintenance items are done, • Helping make sure our facilities are clean, safe environments for our customers and associates, • Building your skills through training and hands-on coaching to perform minor repairs such as installing mounted tires, replacing or rotating tires and performing preventive maintenance repairs, • Completing other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary, • Shift Premiums, • Career stability, • Opportunity for growth, • Excellent benefits, including lots of time off, • Strong, well-rounded training programs, • Advanced vehicle maintenance technology, • Location and schedule flexibility General Requirements: • High school diploma, equivalent, or prior work experience preferred, • Valid driver’s license required, • Excellent customer service and communication skills, • The ability to work well as part of a team, • The ability and willingness to work outside, • Basic mechanical ability and tool usage (preferred), • Basic computer skills, • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management, • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice., • Regular, predictable, full attendance is an essential function of the job, • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review., • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period., • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls., • The associate must be able to work safely at heights using applicable ladders and elevated working platforms., • The associate must be able to safely work in all weather conditions., • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment., • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Pay: $21.50/hr Hours: Monday - Fri 12:00pm - 9:00pm Shift Differentials: Second shift start times after 11am are eligible for $2.00 per hour shift differential Third shift start time after 9pm are eligible for $3.00 per hour shift differential Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Family: Vehicle Maintenance Address: 2250 Boling Street Primary Location: US-MS-Jackson Employer: Penske Truck Leasing Co., L.P. Req ID: 2513015

Aviation Electronics, Electrical, and Computer Systems Technicians (AV) work with some of the most advanced aircraft systems in the world. Troubleshoot and repair complex aircraft systems, including digital computers, fiber optics, infrared detection, radar, and laser electronics. AV technicians ser

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance, • Opportunity for advancement, • Paid time off Job Summary: Responsible for maintaining, troubleshooting and repairing, or arranging for repairs of all building operating systems on the site. Technician will be assigned to multiple locations and must be available for after hour emergency calls Essential Job Duties: (Included but not limited to) • Responsible for all preventive maintenance, necessary maintenance, and minor repairs to the buildings mechanical, electrical, HVAC, and plumbing systems. Must have working knowledge of building mechanical, electrical, HVAC, plumbing, life safety, fire protection and security systems to ensure proper operations. Must be able to act upon any conditions that are out of the ordinary., • Conduct periodic general preventative maintenance on mechanical, electrical, HVAC, and plumbing systems. This includes normal lubrication, adjustment, cleaning, replacement of consumable parts (filters, indicator lights, etc.) and periodic testing of equipment. Conduct general building maintenance as needed., • Be responsive to requests in the areas of safety, plumbing, mechanical, electrical, and environmental needs through both personal contact and work order systems., • Prepare and maintain maintenance logs and records. Familiarity with preventative maintenance and work order software systems., • Coordinate contractor, tenant, and management approvals for work orders that require use of an outside contractor. Maintain log of work order details., • Perform all assigned work to ensure the safety of the building occupants and ensure continuous operation., • Be familiar with and conform to all written operating procedures associated with the site., • Maintain organized files., • Basic electrical skills-change out wall receptacle, replace light bulbs, lights switch, find lighting circuits/reset breakers, etc., • Light carpentry-replace trim boards, wall studs, flooring, etc., • Sheetrock work-replace sheet rock on walls, tape, and float/finish texture a plus., • Light plumbing-replace under sink plumbing, install faucets, install water heaters, fix water leaks, replace water spigots, etc., • Basic HVAC-troubleshooting knowledge. Know how to perform a PM on an HVAC unit. Change air filter, etc., • Door repairs-install/adjust door closets, replace hinges, handles, deadbolts, etc., • Leak repairs-find and repair leaks in windows, doors, metal roofs, shingle roofs, etc., • Painting-painting walls, ceilings, doors, trim, etc., • Exceptional customer service skills, • Ability to think ahead to the next work order/repair to be done., • High School Diploma, • Five (5) years previous experience, • Ability to handle multiple projects and make decisions using FMM's core values of Quality, Teamwork, Integrity, Safety, and Versatility, • Proficient in computer, text, and email skills, • Must be able to lift up to 15 pounds at a time., • Health Insurance-FMM will pay 50% of the employee's premium., • 401K Contribution-FMM will match employee contribution up to 3%, • Optional voluntary benefits, • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • Company Provided Health Club membership., • Company Vehicle and Fuel Card OR Vehicle allowance (dependent on company requirements)

Job DescriptionOn-Call IT Field Technician – PC, Mac, Printer & Scanner Support ???? Location: Multiple U.S. Cities (Local, Onsite Support) ???? Job Type: Independent Contractor (1099) ???? Pay: $35/hour (on-site) ???? Schedule: Flexible – You accept jobs based on your availability ⚠️ Important Note This is an on-call, 1099 independent contractor role with no guaranteed hours. You’ll join our technician network and receive job opportunities based on your location and stated availability. You decide which jobs you want to accept. About Geeks on Site Geeks on Site has been delivering trusted, on-site IT and technical support to homes and businesses nationwide for over 20 years. We’re expanding our network of skilled on-call technicians to meet growing demand for in-person support — including computers, networks, printers, and more. About the Role We’re hiring field IT technicians who can confidently support a wide range of tech needs for residential and small business customers. This includes troubleshooting PCs and Macs, resolving network issues, and repairing or configuring printers/scanners — including issues like Canon MF printer network setup or G-series ink absorber error codes (e.g., 1700). You’ll be dispatched to customer sites, work independently, and complete service calls efficiently and professionally. Key Responsibilities • Diagnose and repair hardware/software issues on Windows and macOS systems, • Resolve boot errors, OS issues, and login problems, • Set up or troubleshoot Wi-Fi and wired internet connections, • Replace or upgrade hardware (HDD, RAM, cooling fans, etc.), • Configure or connect printers and scanners (Canon, HP, Brother, etc.), • Address common printer error codes (e.g., ink absorber, paper feed, connectivity), • Perform general maintenance on multifunction printers (MFPs), • Reinstall operating systems using bootable USBs or recovery media, • Install remote tools or shortcuts as requested, • Communicate clearly with customers and provide basic post-service support, • 2+ years of field IT support experience, including computer and printer work, • Familiarity with Canon, HP, and other common printer brands, • Knowledge of error code troubleshooting (e.g., Canon code 1700, boot issues, driver conflicts), • Experience with both Windows (10/11) and macOS troubleshooting, • Must have personal tools (bootable USB, screwdriver set, etc.), • Reliable vehicle and valid driver's license, • Smartphone with camera and data for documentation and communication Compensation • $35 per hour for on-site time, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely ✅ What to Expect After You Apply • ???? Intro Call – A recruiter will contact you for a quick chat, • ???? Onboarding – Complete paperwork and tax forms electronically, • ???? Background Check – Mandatory before activation, • ???? Set Your Availability – You enter your availability in our tech portal, • ???? Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills Join Our Technician Network If you're a reliable, tech-savvy field technician with hands-on printer experience and a flexible schedule, we’d love to hear from you.

Job DescriptionDescription: Job Summary: To perform a full range of laboratory tests, procedures, experiments, and analyses for the diagnosis, treatment and prevention of disease. To compile specific, technical, statistical and/or numerical data. Knowledge, Skills & Abilities Knowledge of laboratory and experimental protocols and procedures. Knowledge of chemical composition, structure and properties of substances and of the chemical processes and transformations they undergo. Knowledge of plant and animal organisms, their tissues, cells function, intercede with each other and the environment. Analytical skills. Skills in the use of personal computers and related software applications. Ability to analyze, verify, and manipulate clinical and/or laboratory data. Responsibilities Conducts clinical laboratory tests and analysis in the areas of hematology, microbiology, immunology, clinical chemistry, and urinalysis. Analyzes samples of biological material for chemical content or reaction. Conducts chemical analysis of body fluids to determine the presence of normal and abnormal components. Cultivates, isolates, assists in identifying, and conducts tests on microbial organisms; obtains, cuts, stains, and mounts biological material on slides for microscopic study and diagnosis. Selects and prepares specimens and media for cell culture, using aseptic, technique. Studies blood samples to determine the number of cells and their morphology, as well as blood group type, and compatibility for transfusion purposes. Operates, calibrates, and maintains equipment used in quantitative and qualitative analysis such as spectrophotometers, calorimeters, flame photometers, and computer-controlled analyzers; promotes safety, environmental, and/or infection control practices. Performs other duties as assigned. Physical and Environmental Demands Requires occasional exposure to unpleasant or disagreeable physical environment such as high noise level and exposure to heat and cold, constant exposure to bio-hazardous conditions such as risk of radiation exposure, blood borne pathogens, fumes or airborne particles, and/or toxic or caustic chemicals which mandate attention to safety considerations, constant work produced subject to precise measures of quantity and quality, frequent bending, occasional lifting and carrying up to 50 pounds, occasional crouching/stooping, frequent pushing/pulling, frequent reaching, frequent sitting, frequent standing, frequent twisting, and frequent walking. (occasional-up to 20%, frequent-from 21% to 50%, constant-51% or more) Requirements: Education & Experience Associate's degree in a Laboratory Science or Medical Laboratory Technology and eligibility for certification as a Medical Laboratory Technician by a recognized certifying agency. Certifications, Licenses or Registration Required: N/A

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. Exciting New Opportunity in Student Transportation - Jackson, MS! First Student is thrilled to announce an upcoming opportunity in Jackson, MS that offers a chance to make a real impact in the student transportation industry! This role will provide the opportunity to support safe, reliable, and efficient transportation services while contributing to the growth and success of the Jackson community. At First Student, our Dispatchers are a constant reflection of our companys commitment to safety and customer service. The Dispatcher is responsible for dispatching all buses, ensuring on-time performance of routes, and counseling drivers and monitors on front line. Dispatcher Responsibilities: • Oversees all routes and scheduling of buses, • Counsels and coaches drivers and monitors, • Handles heavy phone and radio traffic, • Takes all scheduling and driver complaints, report to Operations Supervisor/Contract Manager, • Serves as primary communication liaison with major contracted customer, • May handle charter reservations, billing, or driver payroll, • Provides solutions to drop-off and pick-up problems, • Handle back-up driver duties or perform miscellaneous clerical duties as needed, • Completes assignment of special projects, • Assists with supervision of day-to-day operations Dispatcher Experience and Skills Required: • 3-5 years experience, • High school diploma or equivalent, • Basic knowledge of radio dispatch equipment, • Excellent communication and customer service skills, • Ability to deliver under time constraints and deadlines, • Previous terminal operations, dispatch, or driver experience, • Computer literate, • Subject to DOT drug testing and physical. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. First Students commitment to putting our customers first, dedication to safety, and an ambition to deliver dependable transportation makes for a working environment youll love. As a huge company with 120,000 staff and over 2.5 billion customers worldwide, youll also enjoy security, a brilliant future, and excellent training. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce therefore all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. For candidates applying to positions in San Francisco or Los Angeles California, First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance or Los Angeles Fair Chance Ordinance. First is an equal opportunity employer and by doing so we will sustain and promote an inclusive culture that supports future growth for all." In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job DescriptionDescription: Job Summary: Become acquainted with and understand SPD procedures, to include decontamination, Prep and Pack, high level disinfection, endoscope reprocessing, sterilizing instruments and operating SPD mechanical equipment properly and safely. Technicians will become acquainted with and understand the process of supplying instruments and other items to the OR and ancillary departments accurately and in a timely manner. Upon completion of orientation and training, techs will be expected to inspect, assemble, package and sterilize surgical instrument sets and procedural trays, and mechanical equipment, for the OR and ancillary departments. Maintains accuracy of 98% or higher. Maintains productivity 90% or higher. Facilitates the interactions between the SPD and OR. The decisions made by the Sterile Processing Technician, and the interpersonal skills used to implement those decisions, must foster an environment of caring and dedication amongst the employees. This job profile may require call subject to the department's discretion. Knowledge, Skills, and Abilities: Ability to learn, understand, and apply clinical knowledge and skills. Basic computer skills. Reading and writing skills. Responsibilities: • Cleans, decontaminates, sterilizes, maintains, and prepares surgical instruments and equipment for distribution., • Ensures compliance with hospital policies and procedures pertaining to the cleaning, sterilization, assembling, storage, and/or validation of medical supplies and equipment., • Ensures compliance with safety, environmental and/or infection control practices. Maintains applicable records and files., • Operates sterilization equipment and washers and maintains quality/safety controls documentation., • Collaborates and maintains inventory of clean and sterilized surgical instruments in accordance with UMMC and regulatory standards., • Follows infection prevention policies, AORN recommendation practices, OSHA guidelines, AAMI guidelines, and other regulatory requirements in the daily practice in order to assure a safe work environment for self, coworkers, and patients., • Demonstrates core standards of exceptional customer service. Certifications, Licenses or Registration Required: N/A Preferred Qualifications: Experience within healthcare environment Physical and Environmental Demands: Requires frequent exposure to unpleasant or disagreeable physical environment such as high noise level and exposure to heat and cold, frequent handling or working with potentially dangerous equipment, constant exposure to biohazardous conditions such as risk of radiation exposure, blood borne pathogens, fumes or airborne particles, and/or toxic or caustic chemicals which mandate attention to safety considerations, occasional working hours significantly beyond regularly scheduled hours, occasional activities subject to significant volume changes of a seasonal/clinical nature, occasional work produced subject to precise measures of quantity and quality, frequent bending, occasional lifting and carrying up to 50 pounds, occasional climbing, occasional crawling, occasional crouching/stooping, occasional driving, frequent kneeling, frequent pushing/pulling, frequent reaching, occasional sitting, frequent standing, frequent twisting, and frequent walking. (occasional-up to 20%, frequent-from 21% to 50%, constant-51% or more)

Job Description Deep South Equipment - Job Description: Service Manager - Jackson, MS Excellent Pay and Benefits Package - Please note: Any wages posted for this Job are estimated compensation for similar positions. While we don't share our pay rates online, our actual pay ranges are based on your current Skills, Knowledge, Experience, and Growth Potential. Competitive compensation and a benefits package to include medical, dental, vision, 401K, and paid holiday and vacations along with other benefits. Take advantage of a career opportunity that offers industry-leading pay for qualified candidates. This is your opportunity to lead a Technician Team with a nationally recognized Hyster-Yale and heavy equipment Dealership. We provide factory training and certification programs, advancement opportunities, and a great work environment. Summary of duties: Provide daily work direction to service technicians and help support the branch team. We would like to find someone qualified to fill the role as soon as possible. To learn more about the position, please apply today. Job performance. Oversee and direct service department activities to obtain projected volumes, profits, and goals. • Maintain customer relations by resolving customers ’ problems/disputes through continual communication in a timely, correct manner., • Recruit, interview, and hire qualified people to ensure proper staffing levels., • Coaching, counseling, and training of employees., • Manage warranty work and claims to the satisfaction of customers and the company., • Monitor all safety aspects in the performance of work, guaranteeing adherence to environmental laws, safety laws and policies, and OSHA laws., • Provide assistance to Product Support Sales Reps (Parts and Services) as required., • Maintain maximum department profits with expense control and efficiency to achieve acceptable profit margins., • Respond to customers in person or by telephone whenever required., • It may require responding after normal working hours., • Prepare required documentation accurately and promptly for company issues and customer quotes., • Maintain up-to-date knowledge of equipment and product technology., • Ability to work with computers and the company's computer programs., • While performing the duties of this job, the employee is frequently required to sit and talk or hear. Thanks Company DescriptionWelcome to Deep South Equipment, where our family has been the premier material handling equipment provider and one-stop shop for businesses for over 25 years. We’re proud to serve the unique needs of our customers in Louisiana, Mississippi, Oklahoma, and Texas, offering a broad selection of new and used equipment, parts, maintenance, operator training, and more. Our expert team takes the time to understand your business and help it succeed. We believe in exceptional customer service and look forward to welcoming you into our family.Welcome to Deep South Equipment, where our family has been the premier material handling equipment provider and one-stop shop for businesses for over 25 years. We’re proud to serve the unique needs of our customers in Louisiana, Mississippi, Oklahoma, and Texas, offering a broad selection of new and used equipment, parts, maintenance, operator training, and more. Our expert team takes the time to understand your business and help it succeed. We believe in exceptional customer service and look forward to welcoming you into our family.

Job DescriptionKey Responsibilities: * Dispatch roadside and on-site service calls to technicians efficiently. * Monitor technician locations, job status, and response times throughout the evening shift. * Answer incoming calls and assist customers with service requests, updates, and scheduling. * Enter, update, and maintain service orders, dispatch logs, and related documentation. * Communicate service priorities, job details, and timelines clearly to technicians. * Coordinate with shop, warehouse, and management teams to support evening operations. * Assist with invoicing, reporting, and other administrative tasks as needed. * Ensure compliance with company policies, safety procedures, and service standards. * Perform other duties as assigned. Skills, Education & Requirements: * High school diploma or equivalent required. * Previous dispatch, administrative, or customer service experience preferred. * Strong communication, organization, and multitasking skills. * Ability to work independently and make decisions during evening hours. * Proficiency with basic computer systems and dispatch/scheduling software. * Professional demeanor with strong problem-solving abilities. Benefits: * 401(k) with company matching * Health, Dental, Vision, and Life Insurance * Paid on-the-job training * Career growth and advancement opportunities Why Join Southern Tire Mart? Southern Tire Mart is an industry leader, recognized as: * #1 Commercial Tire Dealer in the U.S. since 2008 * #1 Truck Retreader in North America since 2007 * #1 North America Commercial Tire Dealer since 2012

Job Description Our techs perform immunohematology reference work and consultations for our customer hospitals in a pleasant and low stress environment. In addition to reference work, our techs process samples for outsourced testing; evaluate laboratory data and test results; investigate and resolve process issues; assist with evaluation, validation and implementation of new technology and instrumentation If you are comfortable working independently within established guidelines; are detail oriented; patient and conscientious; and can interact with customers and co-workers in a helpful, supportive way - you'll fit in perfectly here. Duties: • Must be detail-oriented and organized with all paperwork., • Perform transfusion service consultation. This may include antibody identification with the provision of compatible units., • Assist in the preparation of all components, including special components., • Performs basic laboratory computer functions., • Organize, identify and label blood and blood components with complete accuracy., • Assist with all aspects of shipping recovered plasma to commercial vendors., • Investigate and resolve product quality issues., • Perform and document all phases of batch release including reconciliation, result entry and verification, and quarantine of components., • Perform and document all phases of the discard/destruction of unacceptable components., • Perform and document all phases of testing, quality control, and maintenance to comply with internal and external agency specifications., • Ensures competency of new technical staff through adherence with the Laboratory's Training Program., • Work "On-Call" as necessary., • Assist in teaching student or student groups in routine production procedures., • Reconcile all blood products daily., • Promote individual continuing education as deemed necessary; gain/maintain competency in all required lab procedures. Qualified candidates will have a stable work history and a Bachelor's Degree. A certification in Medical Technology is preferred. Candidate can also be a Medical Lab Technician but must have at least six months to one year related experience and/or training; or equivalent combination of education and experience. SBB, BB or previous experience in a blood bank a plus. We have an excellent training program to ensure you are completely comfortable with the procedures you will be asked to perform. We offer competitive salaries determined by education/experience, outstanding benefits, and a congenial work environment. We're committed to continual improvement. It's a great time to join us in our life saving mission - you'll be glad you did! Mississippi Blood Services is an equal opportunity employer and makes employment decisions without regard to race, color, sex, religion, national origin, age, disability, veteran status, genetic information, sexual orientation or gender identity. EOE/AAP/M/F/Disabled/Vet Drug Free Workplace Pre-employment drug testing required Note: Our application process is designed to be completed through this online process. However, if a reasonable accommodation is needed to enable you to apply for one of our positions, please contact us at 601-368-2647 and we will gladly work with you. Job Posted by ApplicantPro

Job DescriptionDescription: Job Summary: Inspects, assembles, packages and sterilizes surgical instrument sets, procedural trays, and mechanical equipment for the OR and ancillary departments. Operates sterilizers, prepares and dispenses sterile items; performs inspection, cleaning and general servicing of instruments for the OR, internal hospital departments and off-site agencies to insure instruments are operating properly prior to issuing. Maintains accuracy of 98% or higher. Maintains productivity 90% or higher. Able to precept and mentor new employees. Facilitates the interactions between the SPD and OR. The decisions made by the Sterile Processing Technician and the interpersonal skills used to implement those decisions must foster an environment of caring and dedication amongst the employees. Serve as a role model to others in the department. Knowledge, Skills & Abilities: Knowledge of medical terminology and anatomy; Preceptor skills and experience in mentoring and coaching required; General knowledge of function and maintenance of instrumentation; Basic computer skills; Basic reading and writing skills RESPONSIBILITIES: INSURES THE CLEANING, DECONTAMINATION, STERILIZATION, MAINTENANCE, INTEGRITY, AND PREPARATIONS OF SURGICAL INSTRUMENTS, AND EQUIPMENT FOR DISTRIBUTION. ENSURES COMPLIANCE WITH HOSPITAL POLICIES AND PROCEDURES PERTAINING TO THE CLEANING, STERILIZATION, ASSEMBLING, STORAGE, AND/OR VALIDATION OF MEDICAL SUPPLIES AND EQUIPMENT. ENSURES COMPLIANCE WITH SAFETY, ENVIRONMENTAL AND/OR INFECTION CONTROL PRACTICES. MAINTAINS APPLICABLE RECORDS AND FILES. OPERATES STERILIZATION EQUIPMENT AND WASHERS AND MAINTAINS QUALITY/SAFETY CONTROLS DOCUMENTATION. COLLABORATES AND MAINTAINS INVENTORY OF CLEAN AND STERILIZED SURGICAL, INSTRUMENTS IN ACCORDANCE WITH UMMC AND REGULATORY STANDARDS. FOLLOWS INFECTION PREVENTION POLICIES, AORN RECOMMENDATION PRACTICES, OSHA GUIDELINES AAMI GUIDELINES AND OTHER REGULATORY REQUIREMENTS IN THE DAILY PRACTICE IN ORDER TO ASSURE A SAFE WORK ENVIRONMENT FOR SELF, COWORKERS AND PATIENTS. DEMONSTRATES CORE STANDARDS OF EXCEPTIONAL CUSTOMER SERVICE. DEMONSTRATES CORE STANDARDS OF EXCEPTIONAL CUSTOMER SERVICE. MAY SERVE AS PRECEPTOR AND MENTOR TO NEW EMPLOYEES. THE DUTIES LISTED ARE GENERAL IN NATURE AND ARE EXAMPLES OF THE DUTIES AND RESPONSIBILITIES PERFORMED AND ARE NOT MEANT TO BE CONSTRUED AS EXCLUSIVE OR ALL-INCLUSIVE. MANAGEMENT RETAINS THE RIGHT TO ADD OR CHANGE DUTIES AT ANY TIME. Physical and Environmental Demands: Requires frequent exposure to unpleasant or disagreeable physical environment such as high noise level and exposure to heat and cold, frequent handling or working with potentially dangerous equipment, constant exposure to biohazardous conditions such as risk of radiation exposure, blood borne pathogens, fumes or airborne particles, and/or toxic or caustic chemicals which mandate attention to safety considerations, occasional working hours significantly beyond regularly scheduled hours, occasional activities subject to significant volume changes of a seasonal/clinical nature, occasional work produced subject to precise measures of quantity and quality, frequent bending, occasional lifting and carrying up to 25 pounds, occasional climbing, occasional crawling, occasional crouching/stooping, occasional driving, frequent kneeling, frequent pushing/pulling, frequent reaching, occasional sitting, frequent standing, frequent twisting, and frequent walking. (occasional-up to 20%, frequent-from 21% to 50%, constant-51% or more) Requirements: Education & Experience: Minimum requirements for Education / Experience / Certifications HIGH SCHOOL DIPLOMA/GED REQUIRED. Minimum 1 year of sterile processing or surgical technology experience CERTIFICATIONS, LICENSES OR REGISTRATION REQUIRED: Any 1 (one) of the following certifications listed below from either professional organization: Certification Board for Sterile Processing and Distribution (CBSPD) Certified Sterile Processing and Distribution Technician (CSPDT) Certified Surgical Instrument Specialist (CSIS) Certified Flexible Endoscope Reprocessor (CFER) Certified Sterile Processing Management (CSPM) International Association of Healthcare Central Service Materiel Management (IAHCSMM) Certified Registered Central Service Technician (CRCST) Certified Instrument Specialist (CIS) Certified Endoscope Reprocessor (CER) Certified Healthcare Leadership (CHL) Other nationally recognized SPD certifications may be considered. National Board of Surgical Technology and Surgical Assisting (NBSTSA) Certified Surgical Technologist (CST)

Job DescriptionCompany Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description Job Position: Portal Crane Technician Candidate can live anywhere is South East Are you interested in becoming an experienced Portal Crane Technician? Join Konecranes, one of the world’s largest material handling companies. We're seeking skilled individuals with electrical and mechanical expertise that are comfortable working at extreme heights. Our service technicians, the heart of our industry, thrive in a safety-first environment. Portal, or woodyard, cranes are large outdoor gantry cranes that supply wood to paper and lumber mills. This division of Konecranes focuses exclusively on these specialized and complex cranes that are crucial to the operation of our customer’s processes. This role requires extensive travel throughout the southeast, with occasional travel to the Pacific Northwest and Maine. Must be able to travel for up to two weeks at a time. This role requires 100% travel. Career Development: We offer a defined career path for our Technicians to take control of their own future. Learn More, Earn More! Acquire knowledge both experientially and in formal educational settings, progressing through our Technician Levelling program. Enjoy the convenience of real-time tracking accessible through a dedicated app on your company-issued mobile device—an innovative feature facilitating continuous learning and career development. Principal Responsibilities: · Troubleshoot electrical, mechanical, and structural issues on-site. · Work with a team to make mechanical and structural repairs to woodyard cranes · Report findings of repairs to customers via an exit meeting and written reports. Must be able to communicate any defects and there severity in professional manner. Consult with customers on repair and safety issues, offering recommendations for improvement. · Document findings and recommend corrective actions, including safety notifications to customers. · Produce electronic documentation of inspections using company tools. Basic computer and Microsoft word skills required. Complete service reports and other required documents accurately and promptly. · Stay updated on industry codes and regulations (OSHA, ANSI, CMAA, HMI). · Maintain company-issued equipment, vehicles, and assets in proper working order. Operate tools, equipment, and vehicles, reporting deficiencies to the supervisor. · Follow established safety rules and procedures, including customer guidelines. · Perform other responsibilities as assigned by the supervisor. Qualifications Education: High School Diploma required. Associate degree in Industrial Electrical and/or Mechanical Technology or related field preferred or equivalent vocational/technical training and experience. Experience: Minimum two (2) year experience involving mechanical and/or structural repairs. Prior experience with cranes is a plus. Rigging and/or welding experience is requirement. Other Requirements: Must have and maintain a good driving record, including a valid driver's license. Must be willing to work off the ground. Can work varied overtime, as needed by customer, Additional Information Candidate can live anywhere in the Southeast USA - LA, MS, AL, GA, SC, NC, TN, or Northern FL Salary: $22 - $48 an hour - Pay is determined based on skills, geographic location, internal equity, market/data analysis, number of years of prior relevant experience, degrees and/or certifications, technical assessment score, etc. Company Vehicle: Our Service Technicians get a work truck and a gas card to be used for business purposes. Candidates must pass a Motor Vehicle Record (MVR) check. Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Konecranes moves what matters. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. We are an Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled/Other Protected Category. Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency.