Continuous improvement jobs in Wilmington, North CarolinaCreate job alerts

What We Offer: Endoscopy Nurse Manager Are you a passionate nursing professional with a knack for leadership and a deep understanding of endoscopy procedures? We’re looking for an experienced Endoscopy Nurse Manager to lead our dynamic team, ensuring exceptional patient care and operational excellence in our endoscopy department. If you thrive in a fast-paced clinical environment and are committed to fostering a supportive and efficient workplace, this opportunity is perfect for you! Location: New Hanover Regional Medical Center - Wilmington, NC Work Schedule: Varies based on unit needs, Monday - Friday 7am - 5p. On call support required rotating every 7 - 8 weeks What We're Looking For: You are a partner-driven collaborator, skilled at building and nurturing synergistic relationships with providers and multidisciplinary teams. Your leadership fosters a culture of excellence, driving exceptional quality care and continuous improvement in patient services. * A transformational leader with a proven track record of inspiring and engaging team members across the surgical services spectrum. • The ideal candidate excels at interpreting patient experience data to identify root causes and develop innovative, impactful programs that enhance patient outcomes and satisfaction. Visionary leadership that motivates and empowers teams to achieve shared goals * Analytical expertise in leveraging patient feedback and data to inform meaningful change * Strong interpersonal skills to cultivate trust, collaboration, and alignment among clinical partners * Commitment to delivering patient-centered care through innovative solutions and teamwork Qualifications: • Education: Bachelor's Degree, Nursing required., • Experience: Two years clinical RN experience -- acute care setting., • Licensure/certification/registration: Current RN licensure in appropriate state, required. NC state approved curricula for restrictive interventions (facility specific) within 3 months of hire for Emergency Departments and Behavioral Health units, required. Board certification in area of practice, preferred., • Preferred Requirements: Epic Lumens software experience. Master's Degree. Two years demonstrated leadership experience, preferred. Three years clinical RN experience in an acute care setting, preferred., • Additional skills required: Understands and applies: current and future trends/practice in area of responsibility; regulatory and governing standards, policies and procedures; information systems and software used in area of responsibility; equipment used in performing assigned duties; application of safety and infection control policies and procedures; skills in interviewing and selection process; understanding of budgeting, staffing, payroll and purchasing processes; implementation of competency, feedback, development and progressive discipline processes; teambuilding, conflict management, and interpersonal relationship skills; principles of adult learning and teaching methods/models; decision making, project leadership and consultation, delegation and communication skills; customer needs and expectations and knowledge for improvement to exceed customer expectations; principles of change management. What You'll Do: Oversee daily operations of the Endoscopy unit to ensure efficient patient flow and high-quality care delivery * Supervise, mentor, and evaluate nursing staff; manage hiring, training, and scheduling * Develop, update, and enforce policies, procedures, and protocols for endoscopy services * Ensure compliance with healthcare regulations, infection control standards, and safety guidelines * Coordinate multidisciplinary care involving physicians, technicians, and other healthcare professionals * Manage budgeting, resource allocation, and inventory of medical supplies and endoscopy equipment * Monitor patient outcomes and quality indicators; lead quality improvement and safety initiatives * Facilitate ongoing staff education, training, and professional development specific to endoscopy nursing * Address patient concerns, complaints, and promote patient satisfaction and comfort * Maintain accurate and thorough documentation and oversee electronic health records related to procedures * Stay current with advances in endoscopy technology, clinical best practices, and integrate innovations into unit protocols

This is not your average training program. At UniFirst, the Assistant Production Manager Trainee (APM-T) role is a hands-on, high-impact opportunity for individuals ready to step into operational leadership from day one. Over the course of this 9-month immersive program, you won’t just observe — you’ll be actively performing the full scope of APM responsibilities in tandem with your mentor, an experienced Production Manager focusing on people leadership, operational oversight, and business decision-making. This structured, performance-based program is designed to prepare you to transition into an APM role upon successful completion. Willingness to relocate at the end of the program is required. What You'll Do - Not Just Training, Real Responsibility: • Perform APM Duties from Day One: Work side-by-side with an experienced APM to lead daily production operations, ensure team performance, uphold safety standards, and meet production goals., • Hands-On Operational Leadership: Take ownership of workflow management, employee supervision, scheduling, inventory control, and process optimization., • Mentorship in Action: Learn through doing—receive guidance and coaching while executing real responsibilities, not theoretical assignments., • Continuous Improvement: Drive efficiency and quality through active involvement in lean initiatives and process improvements., • Cross-Functional Collaboration: Partner with other departments (Sales, Service, Office, Maintenance) to align production goals with company-wide objectives., • Safety and Compliance: Conduct safety inspections, participate in training programs, and help build a culture of proactive safety and accountability., • Environmental Stewardship: Learn and apply strategies for managing wastewater systems and reducing environmental impact. Key Responsibilities Leadership & People Management • Supervise, coach, and evaluate Production Team Partners to ensure productivity, engagement, and compliance with company standards., • Participate in hiring, onboarding, training, and performance management for Production staff., • Manage day-to-day production operations, including workflow scheduling, inventory management, equipment utilization, and quality assurance., • Make independent decisions regarding staffing allocation, process adjustments, and resource utilization., • Monitor performance metrics and implement strategies to achieve or exceed operational targets. Strategic & Cross-Functional Collaboration • Partner with Sales, Service, Office, and Maintenance leaders to align production output with company-wide goals., • Contribute to strategic planning discussions around efficiency, cost savings, and long-term operational improvements., • Lead or participate in lean initiatives, process improvements, and compliance projects that impact company performance. Safety & Compliance • Ensure adherence to OSHA, ISO, and company safety standards by conducting inspections, leading safety training, and modeling compliance., • Promote a safe, productive workplace while managing environmental stewardship initiatives, including wastewater and waste reduction programs. Program Benefits: • Comprehensive Training: Receive in-depth training on all aspects of route service management, from customer relations to operational efficiency., • Career Growth: Opportunity to transition into a full-time Assistant Production Manger (APM) role upon successful completion of the program., • Leadership Development: Gain valuable leadership experience and build a strong foundation for a career with Unifirst., • Competitive Compensation: Receive a competitive salary and benefits package during the training period., • Job Security: Upon successful completion of the program, you will be placed into a full-time APM role with Unifirst. Upon Successful Completion: Graduates of the program will be fully equipped and eligible to step into a full-time, Assistant Production Manager role at a UniFirst Production facility — where they will lead with confidence and capability from day one. What Success Looks Like in This Role: • Leadership & Team Development: You inspire trust, build high-performing teams, and create a culture of accountability., • Operational Excellence: You take initiative to identify inefficiencies, implement solutions, and deliver measurable results., • Strategic Agility: You adapt to change, align priorities across departments, and help lead your team toward long-term success. Why This Role is Different: • It’s Real Work, Real Fast: You’ll immediately contribute in a meaningful way—no busy work, no sitting on the sidelines., • Mentorship + Ownership: Learn directly from experienced leaders while taking full responsibility for day-to-day production tasks. Qualifications: Required: • 21 years of age or older., • High school diploma or GED., • Valid driver’s license and safe driving record., • At least 2 years of relevant leadership or supervisory experience., • Ability to perform physical tasks including standing, walking, lifting, and moving items for extended periods., • Strong communication and interpersonal skills., • Willingness and ability to relocate upon program completion., • Proficiency in Microsoft Office Suite. Preferred: • Bachelor's degree or 2+ years in a production/operations leadership role., • Familiarity with Lean, Six Sigma, or ISO standards., • Financial literacy and experience using metrics to drive decisions., • Bilingual in English and Spanish is highly preferred., • Demonstrated commitment to safety and compliance. Join Us and Lead the Way At UniFirst, we don’t just train leaders—we build them. If you're ready to roll up your sleeves, learn by doing, and take the fast track into a leadership role, apply now to join our Assistant Production Manager Trainee program. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Premier Medical Staffing Services, LLC is seeking an experienced Progressive Care Unit Registered Nurse for an exciting Travel Nursing job in Wilmington, NC. Shift: 3x12 hr nights Start Date: 01/05/2026 Duration: 13 weeks Pay: $1773.72 / Week About Premier Medical Staffing Services, LLC: Welcome to Premier Medical Staffing Services At Premier Medical Staffing Services, we bridge the gap between exceptional healthcare professionals and the institutions that require their expertise. With a legacy rooted in Milwaukee, our reach extends nationwide, providing tailored staffing solutions that embody quality and compassion. We’re not just filling positions; we’re fostering partnerships that bolster patient care and enhance the medical profession. Premier Medical Staffing Services is Joint Commission Certified, a Military Spouse Employment Partner and is certified as a Women’s Business Enterprise. We are proudly nurse owned. Premier is dedicated to enhancing the quality of patient care by meticulously matching healthcare facilities with top-notch medical professionals. We provide personalized, attentive service that creates lasting, trustworthy relationships, fueled by a steadfast commitment to empathy, integrity, and excellence. By understanding the specialized needs of both employees and clients, Premier strives to foster an environment that respects individuality while driving continuous improvement within the healthcare industry—locally and nationwide. Our Mission: Everything we do, we believe will make a positive difference in those we serve. We do this with Personal Attention, Relationships, Empathy, Giving More, Integrity, Excellence, and Respect. Our journey is driven by a collective spirit—a dedicated team working in unison to navigate the dynamic landscape of healthcare staffing. It’s the stories of lives touched and communities served that fuel our passion and commitment to healthcare excellence. Our Recent Google Reviews from Clinicians "Christina was AMAZING !! So helpful always updated me took me a while to secure a job MA job pool was so low but she did it. I’m in with an amazing facility highly recommend premier staffing!!" - Commerea C. "Premier Medical Staffing has been absolutely amazing. This is my first experience as an RN with a staffing agency, and my recruiter Christina made the transition and onboarding seamless. She answers every question I have, and responds quickly. Overall, I can’t say enough great things about Christina and the team at Premier!!" - Crystal R. "I have been with Premier for almost a year now and my experience have been great! Lauren, my recruiter, is great to work with. She communicates very well and she’s easy to work with. I’m looking forward to continue working for Premier." - E.C.

Premier Medical Staffing Services, LLC is seeking an experienced Progressive Care Unit Registered Nurse for an exciting Travel Nursing job in Wilmington, NC. Shift: 3x12 hr nights Start Date: 01/05/2026 Duration: 13 weeks Pay: $1773.72 / Week About Premier Medical Staffing Services, LLC: Welcome to Premier Medical Staffing Services At Premier Medical Staffing Services, we bridge the gap between exceptional healthcare professionals and the institutions that require their expertise. With a legacy rooted in Milwaukee, our reach extends nationwide, providing tailored staffing solutions that embody quality and compassion. We’re not just filling positions; we’re fostering partnerships that bolster patient care and enhance the medical profession. Premier Medical Staffing Services is Joint Commission Certified, a Military Spouse Employment Partner and is certified as a Women’s Business Enterprise. We are proudly nurse owned. Premier is dedicated to enhancing the quality of patient care by meticulously matching healthcare facilities with top-notch medical professionals. We provide personalized, attentive service that creates lasting, trustworthy relationships, fueled by a steadfast commitment to empathy, integrity, and excellence. By understanding the specialized needs of both employees and clients, Premier strives to foster an environment that respects individuality while driving continuous improvement within the healthcare industry—locally and nationwide. Our Mission: Everything we do, we believe will make a positive difference in those we serve. We do this with Personal Attention, Relationships, Empathy, Giving More, Integrity, Excellence, and Respect. Our journey is driven by a collective spirit—a dedicated team working in unison to navigate the dynamic landscape of healthcare staffing. It’s the stories of lives touched and communities served that fuel our passion and commitment to healthcare excellence. Our Recent Google Reviews from Clinicians "Christina was AMAZING !! So helpful always updated me took me a while to secure a job MA job pool was so low but she did it. I’m in with an amazing facility highly recommend premier staffing!!" - Commerea C. "Premier Medical Staffing has been absolutely amazing. This is my first experience as an RN with a staffing agency, and my recruiter Christina made the transition and onboarding seamless. She answers every question I have, and responds quickly. Overall, I can’t say enough great things about Christina and the team at Premier!!" - Crystal R. "I have been with Premier for almost a year now and my experience have been great! Lauren, my recruiter, is great to work with. She communicates very well and she’s easy to work with. I’m looking forward to continue working for Premier." - E.C.

Premier Medical Staffing Services, LLC is seeking an experienced Progressive Care Unit Registered Nurse for an exciting Travel Nursing job in Wilmington, NC. Shift: 3x12 hr nights Start Date: 01/05/2026 Duration: 13 weeks Pay: $1773.72 / Week About Premier Medical Staffing Services, LLC: Welcome to Premier Medical Staffing Services At Premier Medical Staffing Services, we bridge the gap between exceptional healthcare professionals and the institutions that require their expertise. With a legacy rooted in Milwaukee, our reach extends nationwide, providing tailored staffing solutions that embody quality and compassion. We’re not just filling positions; we’re fostering partnerships that bolster patient care and enhance the medical profession. Premier Medical Staffing Services is Joint Commission Certified, a Military Spouse Employment Partner and is certified as a Women’s Business Enterprise. We are proudly nurse owned. Premier is dedicated to enhancing the quality of patient care by meticulously matching healthcare facilities with top-notch medical professionals. We provide personalized, attentive service that creates lasting, trustworthy relationships, fueled by a steadfast commitment to empathy, integrity, and excellence. By understanding the specialized needs of both employees and clients, Premier strives to foster an environment that respects individuality while driving continuous improvement within the healthcare industry—locally and nationwide. Our Mission: Everything we do, we believe will make a positive difference in those we serve. We do this with Personal Attention, Relationships, Empathy, Giving More, Integrity, Excellence, and Respect. Our journey is driven by a collective spirit—a dedicated team working in unison to navigate the dynamic landscape of healthcare staffing. It’s the stories of lives touched and communities served that fuel our passion and commitment to healthcare excellence. Our Recent Google Reviews from Clinicians "Christina was AMAZING !! So helpful always updated me took me a while to secure a job MA job pool was so low but she did it. I’m in with an amazing facility highly recommend premier staffing!!" - Commerea C. "Premier Medical Staffing has been absolutely amazing. This is my first experience as an RN with a staffing agency, and my recruiter Christina made the transition and onboarding seamless. She answers every question I have, and responds quickly. Overall, I can’t say enough great things about Christina and the team at Premier!!" - Crystal R. "I have been with Premier for almost a year now and my experience have been great! Lauren, my recruiter, is great to work with. She communicates very well and she’s easy to work with. I’m looking forward to continue working for Premier." - E.C.

Requisition Number: 70270 The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Our Optical Communications segment has recently evolved from being a manufacturer of optical fiber and cable, hardware and equipment to being a comprehensive provider of industry-leading optical solutions across the broader communications industry.This segment is classified into two main product groupings - carrier network and enterprise network. The carrier network product group consists primarily of products and solutions for optical-based communications infrastructure for services such as video, data and voice communications. The enterprise network product group consists primarily of optical-based communication networks sold to businesses, governments and individuals for their own use. A manufacturing engineer monitors and improves established manufacturing processes and equipment. To do so, they must leverage; fundamental understanding of manufacturing within their area of expertise, and basic understanding of manufacturing outside their area, data retrieval, analysis and reporting techniques, rigorous problem-solving methodologies and scientific methods and experiment planning A manufacturing engineer makes changes to manufacturing processes and equipment with the goal of improving safety, reducing cost, improving quality, or increasing output. A manufacturing engineer also receives technology from development groups, delivers technology to production groups, and provides high level troubleshooting for manufacturing equipment issues. Scope of Position \n • Work closely with development teams to maximize potential for success of incoming manufacturing/products\n, • Collect data for incoming products and compare vs. metrics\n, • Perform trend analysis (by equipment, attribute, product) and monitor/response plans\n, • Recommend improvements to manufacturing processes/equipment and drive equipment robustness\n, • Identify chronic issues and recommend corrective actions\n, • Ensure accurate documentation for incoming manufacturing/products\n, • Create manufacturing improvement corrective action plans and solutions\n, • Provide inputs about equipment maintenance requirements and shortfalls\n, • Identify when engineering support is required to address significant production platform/process/specification issues or changes\n, • Work with production techs to drive equipment/manufacturing standardization and continuous improvements\n, • Interface with production resources in other sections to drive consistency and share best practices\n, • Interface with Engineering, Facilities, IT and Development organizations \n, • Work with Operations team to include section supervision, shift supervision, and associates as required to ensure teams understand new manufacturing processes/products \n, • Provide technical documentation for experiments conducted, changes made, and lessons learned as a result of above responsibilities.\n, • Train operational organizations on new manufacturing processes, products, or changes to established manufacturing processes and products.\n\n Hours of work/work schedule/flex-time: \n • 8-10 hours/day; 40-50 hours/week.\n, • Periodic off-hours (on-call) coverage\n\n Required Education and Experience: \n • BS or greater in Mechanical, Chemical or Material Science or similar discipline\n, • 1+ years of experience in a manufacturing environment\n, • Strong data analysis skills\n, • Experience with Excel (pivot tables) and Access\n, • Ability to handle multiple tasks and issues effectively\n, • Directive and autonomous\n, • Strong decision making, prioritization and communication skills\n\n Desired Skills: \n • Experience with various Fiber making platforms\n, • Experience with PI manufacturing books\n, • Experience with statistical tools (JMP, Minitab, e.g.)\n, • Demonstrated project leadership\n, • Computer Aided Design (CAD)\n\n This position does not support immigration sponsorship. The range for this position is $69,791.00 - $113,237.00 assuming full time status. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. The benefits available for this position are dependent on hours worked and may include medical, dental, vision, 401(k) plan, pension plan, life insurance coverage, disability benefits, and PTO. A job that shapes a life. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial, and career from day one \n • As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit that grows throughout your career. We also offer a 401(k) savings plan with company matching contributions. \n, • Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, and disease management programs. \n, • Company-wide bonuses and long-term incentives, align with key business results and ensure you are rewarded when the company performs well - when Corning wins, we all win. \n, • Getting paid for our work is important but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a peer-to-peer recognition program to celebrate success by recognizing colleagues who demonstrate above-and-beyond behaviors. \n\n We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at [email protected].

Would you call yourself a relationship builder, a problem solver or a critical thinker? If you answered yes, we need you on our team. At Edward Jones, we are very intentional in calling our field associates branch teams. Most of our teams are two or three people, and in a Client Support Team Professional role, you are a critical member of that team along with the financial advisor. You are the first voice a client hears when they call on the phone - the first face they see when they walk in the door. You have many responsibilities, but the most important is getting to know your clients so well that you not only help them identify their problems - you see them coming a mile away. You and your financial advisor are essential in working together to help your clients achieve their most cherished financial goals. Job Overview Position Schedule: Full-Time Branch Address: 2508 Independence Blvd, Suite 102, Wilmington, NC This job posting is anticipated to remain open for 30 days, from 12-Nov-2025. The posting may close early due to the volume of applicants. If you find yourself looking for a fulfilling career, the Branch Office Administrator (BOA) role may be the right opportunity for you. BOAs team up with financial advisors to help clients achieve their long-term financial goals. The primary role of the BOA is to provide administrative support to a financial advisor or a team of multiple financial advisors. We're proud to serve over nine million clients. Our BOAs are a valued part of the client support team, and we credit much of our success to their unique experiences and professional backgrounds. We value different viewpoints to help achieve results. Role Summary: As a Branch Office Administrator, you'll be a vital part of our team, providing seamless support to our clients. You'll play a key role in supporting client accounts, facilitating communication, and ensuring a positive client experience. This is a fantastic opportunity to grow your career in a dynamic and rewarding environment. We'll give you the support you need. Our team will be there every step of the way, providing: • Comprehensive 6-month training including an experienced peer to help mentor you, • A wide support network that extends from your branch office to your region to the home office, • Delivering exceptional personalized service to ensure clients feel understood and informed, • Taking an active role in the annual business planning process to assist in developing strategies for the upcoming year, • Actively listen for situations in the clients' lives that may indicate a need for additional services, • Driving marketing activities such as planning and executing events You can also expect... • A culture of continuous improvement and professional development reflecting a respect for individuals and their unique contributions, • An inclusive environment where everyone's different viewpoints are valued and help to achieve results., • We recognize individual efforts through a rewards program that promotes a long-term career, your financial security and you and your family's well-being, • Full-time Associates receive the following benefits:, • Edward Jones believes in a human centered approach as we partner for positive impact, to improve the lives of our clients, colleagues, and communities., • Edward Jones is based on a legacy of partnership and as a privately held firm we share the success with our associates through various discretionary and variable compensation programs, which includes bonus opportunities based on branch and firm profitability, along with individual performance., • The hiring minimum and maximum range shown below is a subset of the total pay range. There is also an opportunity for merit-based salary increases as you progress in the BOA role. Hiring Minimum: $21.38 Hiring Maximum: $22.71 Skills/Requirements What skills would make you a successful BOA? • Analytical Thinking, • Attention to Detail, • Adaptability, • Conversational Skills, • Digital Tool Utilization, • Client Service: Provide exceptional service to clients via inbound and outbound calls, email, and in-person interactions. Respond to inquiries, resolve issues, and ensure an exceptional experience. Develop and maintain strong relationships with clients, referral sources, and internal client support team members., • Account Management: Aptitude to learn and understand the financial services industry. Includes account opening, handling account transfers and other requests at the direction of the financial advisor. Process account transactions, prepare documentation, and maintain accurate client records., • Administrative & Operational Support: Strong ability to work independently at the direction of the financial advisor. Handle various administrative tasks, including scheduling appointments, preparing materials for client meetings, managing correspondence and supporting marketing initiatives. Streamlining processes with updating SOPs and strategically execute on the branch business plan., • Technology: Strong computer literacy with willingness to learn new technology and programs such as MoneyGuide, Salesforce, Microsoft Office products and other firm-provided software. Awards & Accolades At Edward Jones, we are building a place where everyone feels like they belong. We're proud of our associates' contributions to the firm and the recognitions we have received. Check out our U.S. awards and accolades: ___ Check out our Canadian awards and accolades: ___ About Us Join a financial services firm where your contributions are valued. Edward Jones is a Fortune 500¹ company where people come first. With over 9 million clients and 20,000 financial advisors across the U.S. and Canada, we're proud to be privately-owned, placing the focus on our clients rather than shareholder returns. Behind everything we do is our purpose: We partner for positive impact to improve the lives of our clients and colleagues, and together, better our communities and society. We are an innovative, flexible, and inclusive organization that attracts, develops, and inspires performance excellence and a sense of belonging. People are at the center of our partnership. Edward Jones associates are seen, heard, respected, and supported. This is what we believe makes us the best place to start or build your career. View our ___. ¹Fortune 500, published June 2024, data as of December 2023. Compensation provided for using, not obtaining, the rating. Edward Jones does not discriminate on the basis of race, color, gender, religion, national origin, age, disability, sexual orientation, pregnancy, veteran status, genetic information or any other basis prohibited by applicable law.

Board Certified Behavior Analyst BCBA -Part or Full Time About Us: BrightBridge is growning and looking to expand in Wilmington, NC! At BrightBridge ABA, we are dedicated to making a meaningful impact on the lives of children and families through evidence-based Applied Behavior Analysis (ABA) therapy. As a family owned and operated ABA company, we combine the latest research with compassionate, family-centered care to deliver high-quality services. Our mission is to support our clients' growth and development by creating positive and sustainable changes that improve their quality of life. Company Culture: Our team approach focuses on creating a supportive, inclusive environment where communication is key. We provide multi-level support to help employees reach their goals, whether through mentorship, regular check-ins, or professional development opportunities. We offer competitive benefits for both part-time and full-time staff, prioritizing work-life balance with flexible schedules and a compassionate, understanding workplace culture. With a commitment to continued learning and growth, we maintain an open-door policy, encouraging open dialogue and feedback to ensure every employee feels valued and supported. Position Summary: We are seeking a highly motivated and compassionate Board Certified Behavior Analyst (BCBA) to join our team. This is an exciting opportunity to be part of our founding team, where you will help shape our services as a Board Certified Behavior Analyst (BCBA), contribute to building a strong team culture, and develop innovative programming. The ideal Board Certified Behavior Analyst (BCBA) candidate is dedicated to advancing their clinical skills, committed to ethical practices and continued learning and ready to take on a leadership role in guiding our team to deliver exceptional ABA services. BCBA Duties and Responsibilities: • Conduct initial assessments and create individualized treatment plans based on the specific needs and goals of each client, ensuring that BCBA standards of practice are met, • Develop, implement, and oversee ABA programs, ensuring they are delivered with fidelity and effectiveness by following BCBA protocols and guidelines, • Supervise and mentor a team of RBTs, providing guidance, training, and ongoing professional development under BCBA supervision requirements, • Monitor client progress through data collection and analysis, making necessary adjustments to treatment plans as a proactive BCBA, • Collaborate closely with families, caregivers, and other team members to ensure cohesive and supportive care, aligning with BCBA standards, • Maintain open communication with families, providing regular updates and guidance on how to support their child’s progress, • Actively participate in team meetings, contribute ideas for continuous improvement, and support our culture of innovation and high standards of care, • Current Board Certified Behavior Analyst (BCBA) certification in good standing with the BACB, • Master’s degree in Applied Behavior Analysis, Psychology, Education, or a related field, • Strong understanding of ABA principles and experience in a variety of ABA techniques and interventions, emphasizing BCBA standards, • Excellent interpersonal, written, and verbal communication skills, • Ability to work effectively both independently and as part of a team, • Familiarity with electronic health records and data collection software, • Skills in parent training and family support services, • Innovative Work Environment: Be part of a dynamic, growth-oriented team dedicated to improving and evolving the ABA field., • Career Development: We support your professional growth with training opportunities, BCBA supervision, and career advancement., • Collaborative Culture: Work with a dedicated team committed to compassion, integrity, and evidence-based practices., • Highly Competitive Pay with opportunities for advancement and bonuses, • 10 Paid Holidays/15 days of PTO, • 401K with partial company matching, • Mileage reimbursement between clients, • Paid CEUs/Conference attendance, • Free health insurance for employees with Vision and Dental Benefits. 50% discounted premiums for spouse. (Dependent coverage is the responsibility of the employee; however, these contributions will be deducted from payroll on a pre-tax basis, in accordance with IRS Section 125 guidelines) · Competitive Starting Salary: $90,000 - $110,000 Based on Experience and Qualifications

Job Description Job Summary The Shift Leader supervises shifts and/or work areas in the operation of a Papa John’s restaurant to ensure high quality products and customer service are delivered to ensure restaurant profitability. Other responsibilities include the management of operations including the execution of all Company policies, procedures, programs and systems. Ensure compliance with all federal, state and local laws and ethical business practices. Duties and Responsibilities • Adheres to guidelines, techniques and expectations for each station including, but not limited to, dough management, accuracy and proper portioning. Performs assigned work station duties such as making quality products, follows all product preparations procedures and maintains established product holding times., • Consistently contributes to achieving the Company’s product goal. Commits to meeting the needs and expectations of the restaurant’s customers, minimizes customer complaints and responds appropriately to customer needs. Follows all policies and procedures as outlined in our TM handbook including, but not limited to, image (including car topper for delivery drivers), attendance, safety and security., • Exemplifies and exhibits the Core Values, maintains a positive attitude, works well with others and is flexible and adaptable to change., • Ensures adequate shift coverage for restaurant. Provides immediate feedback and corrects problems when identified. Maintains product quality, customer service, and performance responsibilities (such as MCE readiness, food/labor costs, restaurant cleanliness, etc.) within acceptable standards, follows all policies and procedures related to shift management., • High School diploma or GED preferred, • Serv-Safe/Local or State Food Service Certification preferred, • Previous restaurant shift lead experience preferred, • Successful and stable employment history, • Must be 18 years of age or older, • Must be able to work long hours (32+ hours generally required), scheduled or unscheduled, which will include nights,, • weekends, and as emergencies arise, • Planning & Prioritization, • Communicates Effectively, • EVERYONE BELONGS - We believe connectedness and belonging are the essential ingredients to our success, • DO THE RIGHT THING - We are relentlessly focused on quality and integrity and make the right choices, even when it's difficult, • PEOPLE FIRST - To craft positive experiences for our customers, we take care of each other first, • INNOVATE TO WIN - We champion and challenge for a better way in all we do, • CUSTOMER CENTRIC - We leverage data and insights to craft a customer experience that builds relationships, cultivates trust, and delivers excellence, • RESULTS DRIVEN – We focus on measurable outcomes by remaining optimistic, tenacious, and persistent even in the face of challenges, • CONTINUOUS IMPROVEMENT - We champion for better through strategic risk taking, experimentation and challenging the status quo, • BIAS FOR ACTION - We courageously lead, drive towards decisions, and maintain agility to meet the demands of our dynamic industry Papa Johns is a federal contractor that participates in the E-Verify program to confirm employment eligibility for each new team member. We also comply with all Right to Work requirements. Official E-Verify and Right to Work notices are available for applicants to review in both English and Spanish.

Requisition Number: 71922 The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Our Optical Communications segment has recently evolved from being a manufacturer of optical fiber and cable, hardware and equipment to being a comprehensive provider of industry-leading optical solutions across the broader communications industry.This segment is classified into two main product groupings - carrier network and enterprise network. The carrier network product group consists primarily of products and solutions for optical-based communications infrastructure for services such as video, data and voice communications. The enterprise network product group consists primarily of optical-based communication networks sold to businesses, governments and individuals for their own use. Scope of Position: Support the plant through the timely procurement of quality materials in support of the manufacturing plan. Execute procurement strategies that Assure Supply and Optimize Total Cost of Ownership for the Plant. Day to Day Responsibilities: Procurement Activities • Responsible for tactical procurement execution for assigned material, equipment and services. Duties include communication to suppliers, submission of PO's, monitoring of deliveries, expediting materials and resolving billing discrepancies as needed., • Submits requests for new vendor setup in the system., • Works with Strategic Procurement, Operations and the Business Teams to execute the Key Commodity Strategies., • Ensures compliance to the Global Buying Policy., • Manages relationships with supplier customer service representatives., • Assumes responsibility for smaller commodity spend and procurement projects. Inventory Management • Analyzes, plans and determines proper material requirements using MRP and Logility tools., • Manages inventory levels and inventory turns. Tracks and reports for all assigned items to ensure goals are being met., • Generates and communicates volume forecast to suppliers as required while understanding supplier constraints and capacity levers., • Supports salvage and recycling programs of all assigned materials and scrap reduction efforts in coordination with production and engineering., • Works with Logistics, Operations and Transportation Groups to ensure that material deliveries are optimized (time, quality and cost). Quality / Supplier Management • Primary point of contact on vendor relations necessary to supply the plant effectively and efficiently, • Supports supplier quality audits and supplier meetings., • Collects, analyzes and summarizes supply management performance metrics against objectives including quality, cost, on-time delivery and lead-time. Communicates results and works with suppliers to drive continuous improvement., • Works with Quality, Warehouse and Product Engineering to ensure proper disposition of rejected materials. Travel Requirements: 5%-10% travel. Trips to Corning locations and supplier sites for site audits, quality resolution, price negotiations, supplier business reviews, supplier development or project coordination. Travel may also include travel associated with training and development. Required Skills: • Bachelors Degree in Supply Chain, Business or technical field.\n Desired Skills: \n • Knowledge and understanding of Manufacturing Execution Systems (MES) and Enterprise Resource Planning (ERP) Systems. SAP knowledge a plus.\n, • CPIM and/or CSCP Certifications\n\n\n, • Strong analytical abilities with attention to detail.\n, • Demonstrated decision making and problem-solving skills.\n, • Ability to communicate effectively, both written and verbal, throughout all internal levels of the organization and externally.\n, • Proven organizational and time management skills.\n\n This position does not support immigration sponsorship. The range for this position is $69,318.00 - $95,313.00 assuming full time status. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. A job that shapes a life. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial aspirations, and career from day one. \n • Company-wide bonuses and long-term incentives align with key business results and ensure you are rewarded when the company performs well. When Corning wins, we all win.\n, • As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit with fixed contributions that grow throughout your career. Combined with matching contributions to your 401(k) savings plan, Corning's total contributions to your retirement accounts can reach between 7% and 12% of your pay, depending on your age and years of service.\n, • Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, disease management programs, paid time off, and an Employee Assistance Program (EAP) to support you and your family. \n, • Getting paid for our work is important, but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a recognition program to celebrate successes and reward colleagues who make exceptional contributions. \n\n We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at [email protected].

Job DescriptionManufacturing Engineer About Us We are a global leader in the design and manufacturing of advanced automotive components, committed to delivering innovative solutions that drive performance, safety, and sustainability. With a strong presence across international markets, our company fosters a culture of excellence, collaboration, and continuous improvement. We invest in cutting-edge technologies and empower our teams to shape the future of mobility through engineering expertise and operational excellence. Position Summary We are seeking a dynamic and detail-oriented Manufacturing Engineer to join our team. In this role, you will be responsible for developing, implementing, and optimizing manufacturing processes to ensure efficient production and high-quality output. You will collaborate with cross-functional teams to identify opportunities for improvement, support new product launches, and drive cost-effective solutions. This position offers the opportunity to work in a fast-paced environment where innovation and precision are key to success. Who Should Apply We welcome applications fromrecent graduates in engineering as well as professionals with up to 3 years of experience in manufacturing environments. If you're passionate about automotive innovation and eager to grow in a collaborative and high-performance setting, we encourage you to apply. Preferred Qualifications * Experience with automotive manufacturing processes and standards * Proficiency in CAD software and process simulation tools * Knowledge of lean manufacturing and Six Sigma methodologies * Strong project management skills with the ability to lead cross-functional initiatives * 3 years of experience in a manufacturing engineering role Required Qualifications * Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related field * Demonstrated ability to analyze and improve production processes * Excellent communication and problem-solving skills Position Overview The Manufacturing Engineer will be responsible for supporting production operations by developing and refining manufacturing processes that meet safety, quality, and efficiency standards. Key responsibilities include conducting root cause analysis for process issues, implementing corrective actions, and supporting continuous improvement initiatives. The role also involves working closely with design and production teams to ensure manufacturability of new products, maintaining documentation and process controls, and contributing to cost reduction efforts. This position requires a hands-on approach, a strong technical background, and the ability to work collaboratively across departments. The ideal candidate will be proactive, adaptable, and committed to driving operational excellence in a high-performance manufacturing environment.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance Location: Wilmington, NC Job Type: Full-time Salary: Competitive, based on experience Benefits: Comprehensive benefits package About Wilmington Machinery Wilmington Machinery is a leader in designing and manufacturing large-scale low-pressure injection molding machinery. We serve a global customer base and are dedicated to innovation, quality, and customer satisfaction. Job Summary We are seeking an experienced Controls Engineer to develop, program, and optimize electrical control systems for our machinery. The ideal candidate will work collaboratively with our engineering team to enhance machine functionality, ensure compliance with industry standards, and support manufacturing operations. Key Responsibilities • PLC & HMI Development Program, troubleshoot, and optimize PLC and HMI systems, ensuring seamless machine control., • Electrical System Design Design electrical control panels, select components, and create schematic drawings., • Machine Integration Work alongside mechanical and programming engineers to develop efficient hardware-software interfaces., • Safety & Compliance Ensure designs meet industry safety standards and best practices., • Manufacturing Support Assist manufacturing personnel in troubleshooting and resolving electrical control issues., • Customer Requirements Develop solutions that meet customer specifications while ensuring manufacturability., • Continuous Improvement Implement innovative control strategies to improve machine performance and efficiency., • Technical Support Provide expertise in diagnosing and resolving electrical malfunctions.Qualifications & Skills, • Education: Bachelor's degree in Electrical Engineering or related field., • Experience: Minimum 5 years in a similar role, preferably in industrial automation or machinery manufacturing., • Technical Expertise:, • Proficiency in PLC programming (Allen-Bradley, Siemens, etc.)., • Experience with HMI development and integration., • Strong knowledge of electrical wiring practices and machine tool control systems., • Understanding of AC/DC motors, power distribution, and automation systems., • Proficiency in AutoCAD, Eplan, or similar software for electrical schematics., • Soft Skills:, • Strong problem-solving and analytical skills., • Excellent communication and teamwork abilities., • Ability to work independently with minimal supervision., • Additional Information, • Must pass a pre-employment drug screening and background check.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance About Wilmington Machinery Wilmington Machinery is a leader in designing and manufacturing large-scale low-pressure injection molding machinery. We serve a global customer base and are dedicated to innovation, quality, and customer satisfaction. Job Summary We are seeking an experienced Controls Engineer to develop, program, and optimize electrical control systems for our machinery. The ideal candidate will work collaboratively with our engineering team to enhance machine functionality, ensure compliance with industry standards, and support manufacturing operations. Key Responsibilities • PLC & HMI Development Program, troubleshoot, and optimize PLC and HMI systems, ensuring seamless machine control., • Electrical System Design Design electrical control panels, select components, and create schematic drawings., • Machine Integration Work alongside mechanical and programming engineers to develop efficient hardware-software interfaces., • Safety & Compliance Ensure designs meet industry safety standards and best practices., • Manufacturing Support Assist manufacturing personnel in troubleshooting and resolving electrical control issues., • Customer Requirements Develop solutions that meet customer specifications while ensuring manufacturability., • Continuous Improvement Implement innovative control strategies to improve machine performance and efficiency., • Technical Support Provide expertise in diagnosing and resolving electrical malfunctions.Qualifications & Skills, • Education: Bachelor's degree in Electrical Engineering or related field., • Experience: Minimum 5 years in a similar role, preferably in industrial automation or machinery manufacturing., • Technical Expertise:, • Proficiency in PLC programming (Allen-Bradley, Siemens, etc.)., • Experience with HMI development and integration., • Strong knowledge of electrical wiring practices and machine tool control systems., • Understanding of AC/DC motors, power distribution, and automation systems., • Proficiency in AutoCAD, Eplan, or similar software for electrical schematics., • Soft Skills:, • Strong problem-solving and analytical skills., • Excellent communication and teamwork abilities., • Ability to work independently with minimal supervision., • Additional Information, • Must pass a pre-employment drug screening and background check.

Job Description Help run the airport! Wilmington International Airport (ILM) is growing 75%! In anticipation of the growth, we are opening exciting career opportunities up to the community with the addition of a part-time Operations Specialist I. We really look forward to welcoming new teammates to join in our success. We offer competitive wages, not to mention the chance to be in the mix of airport Operations in the terminal, on the airfield and beyond. Working at ILM: ILM is still a relatively small organization and that allows our employees to know one another, supporting a close-knit but high-performing culture. The airport is best known for a coastal feel that allows for easy travel. We are able to offer an exceptional experience to our passengers thanks to the efforts of our great ILM team. Operations Specialists are critical to our 24/7/365 success. We Believe In: • Our Values: • Teamwork for Results, • Take Responsibility for Resources (Work/Time/Resources), • Communicate for Success and Efficiency, • Use Integrity and Follow the Golden Rule, • Respect Diversity because it Drives Innovation, • Providing Customer Service is Everyone’s Job • Total safety and regulatory excellence., • Promoting from within and growing our talent - we are proud of our track record; we regularly promote from positions at any level., • Constantly improving. We look for and are open to improving the way we work. We value our employee’s feedback and believe continuous improvement is necessary to continue our growth path. The Position: We are looking for a part-time Operations Specialist. The pay we are offering is $15.69/hour. Responsibilities: Reporting to the Operations Supervisor, an Operations Specialists primary duties are to control traffic at the terminal curb, operates the airport shuttle and carry out duties associated with daily airport operational activities. Assists customers to insure a seamless airport experience. Performs airfield perimeter and terminal inspections. Assists with oversight of the Airport Volunteer staff. Performs communications, customer service, and other Operations and emergency response coordination. Acts as Liaison between tenants and Operations Manager. Requirements/Qualifications: • Physical Demands: Some exposure to aircraft noise and fuels, daily contact with chemicals and airport construction. Potential exposure to aircraft and vehicle accidents. Position requires much driving, standing, bending, kneeling, reaching, climbing, pushing, pulling, lifting and walking. Some exposure to inclement weather., • Working Conditions: Working hours are routinely up to 30-hours a week dependent upon scheduled shift. Must be willing to work any shift, weekends and holidays. Due to the nature of responsibilities, may require longer work hours in order to complete assignments., • Education/Knowledge: High School diploma or GED. Must possess a valid North Carolina Class “C” driver’s license with an acceptable driving record and the ability to maintain insurability by ILM. Must also be qualified to obtain a North Carolina Class “A” driver’s license., • Experience: No formal related experience required. Airline or aviation related experience preferred., • Skills/Aptitudes: Must be able to react quickly and calmly in emergencies and be able to operate motor vehicles in dangerous situations. Must be able to physically perform basic functions of driving, climbing, balancing, stooping, kneeling, crawling, reaching, standing, walking, pushing, pulling and lifting. Knowledge of safe rifle operation. Must have aptitude to gain airfield vehicle operating status. The Location: ILM is in Wilmington, NC off of 23rd Street. Wilmington was voted one of the “South’s Best Cities” by Southern Living in 2019 and is well-known for its quality of life. Easy commute within Wilmington/Leland. ~30-minute commute from Hampstead, Burgaw, Carolina Beach. Why Should You Apply? • ILM is experiencing exciting growth – the $60 million terminal expansion project is well-underway!, • 2018 recipient of the Airports Council International North America’s (ACI-NA) Brand Identity Honorable Mention Award., • On-the-job training and exposure to a niche industry – airport Operations., • We believe in investing in our community and do so by supporting not-for-profit partners through volunteerism and donations each year. Job Type: Part-Time Pay: $15.69 per hour • $750 Hiring Bonus ($250 when hired/$500 after 9 months) Benefits: • Employee Airline Ticket Stipend Available Schedules: • Monday, Thursday and Sunday: 4 PM to 12 AM, • Monday, Tuesday and Friday: 8 AM to 4 PM Education: • High school or equivalent (Required) License/Certification: • Valid Driver's License (Required) Shift availability: • Day Shift (Required), • Night Shift (Required) Work Location: In person/On-site Job Type: Part-time Benefits: • Employee discount, • Paid time off Schedule: • Evening shift, • Night shift Education: • High school or equivalent (Preferred) License/Certification: • Driver's License (Required) Shift availability: • Night Shift (Required) Ability to Commute: • Wilmington, NC 28405 (Required) Work Location: In person

Job Description Apply now: Manager, Software, location is Remote (with quarterly onsite). The start date is Early January 2026 for this permanent position. Job Title: Software Development Manager Location: 100% Remote (Quarterly onsite in Wilmington, NC) Start Date Is: Early January 2026 Duration: Permanent Salary Range: $120-135K Job Description: Lead and develop a growing software engineering team in the client's Agentic AI-first transformation, with a strong focus on leadership, innovation, and operational efficiency. Day-to-Day Responsibilities: * Lead a small team of engineers focused on agentic code reviews and development * Coordinate development flows with architecture, QA, DevOps, and SRE functions * Set and manage software engineering priorities aligned with company goals * Guide the use of AI tools for code generation and software delivery * Ensure consistent software quality, performance, and reliability * Coach team members and foster a culture of ownership and continuous improvement * Collaborate cross-functionally on architecture and strategic initiatives * Represent software engineering in planning, reviews, and audits Requirements: * Must-Haves: * 7 years of software engineering experience * 2 years of leadership in a software team * Experience with .NET Core and modern software stacks * 1 years of hands-on Agentic AI experience for code generation (personal or professional) * Strong ownership mindset and effective team leadership * Experience in startup to mid-sized company environments * Ability to lead, mentor, and make strategic technical decisions * Nice-to-Haves: * Experience in logistics, supply chain, warehousing, or Client sectors * Familiarity with Snowflake and Python * Background involving physical processes (vs. purely digital)

Job Description Position Overview The Quality Manager will be responsible for the development, execution and continuous improvement of the quality program for their assigned focus areas. The Manager will ensure that all company products and services meet quality standards before they go to market. This position will be located at the plant in Newton, NC and will require occasional travel. Company and Opportunity Overview Wanzl North America’s (WNA) vision is to be a leading entrepreneurial player in terms of market share, agility, and game-changing solutions. WNA is a solution provider, creating value along the supply chain of our customers, from the online purchase to the delivery to their customers. WNA, which includes the Technibilt and Cari-All brands, headquartered in Denver, North Carolina. With nearly 500 employees and 175 MUSD of sales, WNA focuses on the retail and distribution market segments with marquee customers such as Walmart, Amazon, and most large grocers and retailers. In addition to being the largest manufacturer of shopping carts in North America, WNA has three (3) additional main product segments as well as a Service business, providing turnkey solutions for customer guidance (Access Systems) and Shelving & Fixtures, as well as Material Handling/Rolling Stock products. Additionally, WNA is active in building a “digital” business line with products for shopping cart containment, smart exit gate technology, and solutions for autonomous and/or semi-autonomous retail stores. WNA is part of the Wanzl group, headquartered in Germany, and has 12 plants in 8 countries, providing comprehensive, solutions-driven service and expert knowledge of local markets for customers across the globe through their 360°ree; service. Duties and Responsibilities: • Drive a culture of quality excellence and continuous improvement., • Develop, implement, and maintain a comprehensive Quality Management System (QMS) that supports both production and field activities., • Determine, Track, and Improve critical KPI’s, • Collaborate with stakeholders to reduce cost of poor quality, • Define and execute quality goals, policies, procedures, and systems aligned with business strategy., • Establish clear processes, provide training, and ensure site-wide adherence to quality standards., • Partner with Purchasing to define supplier/vendor quality requirements; oversee resolution of failures with corrective and preventive measures., • Serve as a key liaison with customers to ensure compliance with specifications and effective resolution of quality issues., • Lead and maintain quality inspection and product release programs for incoming materials, in-process work, and finished goods., • Oversee internal and external reporting requirements, including compliance with regulatory standards., • Recommend, coordinate, and deliver employee quality training initiatives., • Ensure compliance with national and international standards (e.g., ISO, ASTM, or other applicable standards)., • Directly supervise and develop Quality Engineers, Field Technicians, and Quality Technicians. Skills and Experience: • Bachelor’s degree in Engineering or equivalent technical field., • Minimum 5 years of Quality Assurance experience in a consumer product manufacturing environment; experience with fabricated steel products preferred., • Strong hands-on experience in both manufacturing and field service activities., • Proven track record collaborating with contract manufacturers, suppliers, distributors, and customers., • Demonstrated leadership with excellent written and verbal communication skills, including executive-level reporting., • Strong attention to detail and organizational skills., • Proficiency in Microsoft Office Suite., • Experience with quality management systems and quality audits., • Experience in Lean Manufacturing projects; Lean/Six Sigma certification preferred., • Ability to travel domestically and internationally (up to 10%).

Job Description RESPONSIBILITIES Strategic Planning: Develop and implement strategic plans to achieve organizational objectives. Collaborate with executive leadership to align operations with overall company goals. Team Leadership: Provide leadership and direction to the facility coordinators, including hiring, training, and performance management. Foster a culture of accountability, innovation, and continuous improvement. Operational Oversight: Oversee all operational functions, including facilities management, logistics, procurement, and vendor management. Ensure smooth day-to-day operations and identify opportunities for process optimization. Budget Management: Develop and manage operational budgets, ensuring cost-effective utilization of resources. Monitor expenses, identify cost-saving opportunities, and maintain financial discipline. Compliance and Risk Management: Ensure license compliance with regulatory requirements and industry standards. Identify and mitigate operational risks to protect the organization's assets and reputation. Cross-Functional Collaboration: Collaborate with other departments, such as Development and Finance to streamline processes and improve interdepartmental communication and coordination. Performance Metrics: Establish key performance indicators (KPIs) to measure operational performance. Analyze data and metrics to identify trends, areas for improvement, and opportunities for innovation. Continuous Improvement: Drive a culture of continuous improvement, fostering innovation and creativity to enhance operational efficiency and effectiveness. Implement best practices and benchmark performance against industry standards. ESSENTIAL DUTIES Essential functions include but are not limited to the following: · Manage and assist IT service provider in the completion of related activities (including phone service) · Oversee the operation, storage and preventative maintenance of fleet vehicles · Regular inspection of all facility buildings, grounds, furniture and equipment for functionality, cleanliness or needed repair. · Perform and document all necessary safety and regulatory inspections of the facility · Ensure proper function of office equipment, such as computers, phones, printers, copiers, and fax machines · Ensure cleanliness and proper function of furniture throughout that facility · Ensure all sanitation and licensure requirements are met · Ensure all regulatory signage is present and up to date · Ensure disaster plan is up to date and currently in place, including emergency food and supplies · Maintain open communication with New Hanover County and all other community partners regarding facility repairs, upkeep, and construction · Ensure the facility maintains compliance with local and state inspections · Ensure that facility, furniture and equipment meet safety standards SKILLS Excellent written/verbal/interpersonal communication skills Precise attention to detail Ability to maintain confidentiality of information, people and processes Comfortable communicating with individuals with a diversity of backgrounds, income levels, and influence Organized with strong time management skills QUALIFICATIONS / REQUIREMENTS Bachelor’s Degree preferred 3 years of experience in facilities management, logistics, or related fields preferred Strong leadership skills, with the ability to inspire and motivate teams to achieve results Excellent strategic thinking and problem-solving abilities Solid understanding of budget management and financial analysis Exceptional communication and interpersonal skills Ability to thrive in a fast-paced, dynamic environment and manage multiple priorities effectively Must be able to lift 50lbs. on occasion Valid Driver’s License required Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Title Job Reports To (Manager’s Title) Site Safety & Health Officer (SSHO) Program Manager Department Job Grade Compensation Operations Status Post date Close date ☐ Exempt ☒ Non-Exempt ☒ Full-Time ☐ Part-Time 10/22/2025 Position Summary: The Site Safety & Health Officer (SSHO) will serve as the primary authority for planning, implementing, and enforcing the Contractor’s Safety and Health Program under this potential contract supporting the 81st Readiness Division (RD). This position ensures all operational, maintenance, and environmental activities are conducted in strict compliance with federal, state, and local safety standards requirements. The SSHO works collaboratively with the Program Manager (PM) and Quality Control Manager (QCM) to promote a unified safety and quality culture, perform enterprise-level risk assessments, and ensure consistent reporting and compliance across all 81st RD sites. This position is contingent upon contract award and is for a possible contract. Duties and Responsibilities: • Develop, implement, and enforce the Contractor’s Safety and Health Program in accordance with contract requirements and applicable regulations., • Ensure compliance with OSHA, EM 385-1-1, AR 420-1, and EO 14057 sustainability and environmental directives., • Conduct daily safety inspections, hazard analyses, and risk assessments for all ongoing site activities., • Prepare, maintain, and update all required Safety Plans, Accident Prevention Plans (APPs), and other safety documentation., • Provide regular safety briefings, toolbox talks, and safety-related training for all project personnel and subcontractors., • Investigate all incidents, accidents, and near-miss events, ensuring root-cause analysis and corrective action implementation., • Maintain complete and accurate safety records, including logs, inspection reports, and incident summaries, for government review., • Coordinate closely with the PM and QCM to integrate safety performance into quality control and operational objectives., • Conduct enterprise-level trend analysis to identify risks and develop preventive measures across all supported sites., • Must have a minimum of 3 years of satisfactory experience in preparing and enforcing a Contractor’s safety program on contracts of similar size, scope, and complexity within the past., • Must have successfully completed the 30-hour OSHA Safety Class or equivalent within the last three (3) years., • Must pass a background screen Preferred Qualifications: • Dedicated safety professional certified in OSHA-30 and EM 385-1-1 compliance., • Advanced training in Behavior-Based Safety (BBS), AR 420-1 sustainability, and Executive Order (EO) 14057 environmental compliance., • Experience performing enterprise-level risk assessments and implementing preventive safety programs across multiple project locations., • Strong knowledge of federal safety management systems and Army Reserve environmental and occupational health programs., • Demonstrated ability to develop and lead proactive, data-driven safety initiatives that reduce risk and enhance organizational culture. Location: 81st Readiness Division • Charlotte, NC, • Concord, NC, • Cary, NC, • Garner, NC, • McLeansville, NC, • Winterville, NC, • High Point, NC, • Lumberton, NC, • Morehead City, NC, • Rocky Mount, NC, • Salisbury, NC, • Wilson, NC, • Winston-Salem, NC, • Wilmington, NC, • Knightdale, NC, • Florence, SC, • Myrtle Beach, SC Physical and Technical Environment: • Prolonged periods of sitting at a desk and working on a computer. ·, • Must be able to lift to 40 pounds at a time. ·, • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Vacation Time, • Sick Time (The right is reserved under provisions PL 93-638 Section (b), (f), (g), (i), 20 USD450 Indian Self Determination and Education Assistance Act of 1974 to give PREFERENCE AND OPPORTUNITY for employment, training, and contracts to Indians)

Job Description Position Overview The SAP Materials & Continuous Improvement Integrator will play a pivotal role in the implementation and optimization of SAP S/4HANA modules that support the Materials function. This includes, but is not limited to, Material Requirements Planning (MRP), Inventory Management (IM), Warehouse Management (WM), Procurement (MM), and advanced planning tools such as SAP Detailed Scheduling for Public Cloud (DSPC) and/or Integrated Business Planning (IBP). This position will serve as a key liaison between the Materials team, Operations, IT, and external SAP consultants to ensure SAP capabilities are fully leveraged to support data-driven decision-making, inventory accuracy, procurement efficiency, and supply chain resilience. Initially, the role will focus on optimizing manufacturing planning, scheduling, and inventory control through effective use of SAP S/4HANA DSPC. Over time, it is expected to evolve into broader materials management responsibilities, supporting the development of future leadership within the supply chain organization. Company and Opportunity Overview Wanzl North America’s (WNA) vision is to be a leading entrepreneurial player in terms of market share, agility, and game-changing solutions. WNA is a solution provider, creating value along the supply chain of our customers, from the online purchase to the delivery to their customers. WNA, which includes the Technibilt and Cari-All brands, headquartered in Denver, North Carolina. With nearly 500 employees and 175 MUSD of sales, WNA focuses on the retail and distribution market segments with marquee customers such as Walmart, Amazon, and the majority of large grocers and retailers. In addition to being the largest manufacturer of shopping carts in North America, WNA has three (3) additional main product segments as well as a Service business, providing turnkey solutions for customer guidance (Access Systems) and Shelving & Fixtures, as well as Material Handling/Rolling Stock products. Additionally, WNA is active in building a “digital” business line with products for shopping cart containment, smart exit gate technology, and solutions for autonomous and/or semi-autonomous retail stores. WNA is part of the Wanzl group, headquartered in Germany, and has 12 plants in 8 countries, providing comprehensive, solutions-driven service and expert knowledge of local markets for customers across the globe through their 360°ree; service. Duties and Responsibilities: SAP Materials Integration & Optimization • Lead the implementation and optimization of SAP S/4HANA modules related to the Materials function, including MRP, MM, IM, WM, DSPC, and IBP., • Collaborate with cross-functional teams to design and deploy planning strategies aligned with business goals., • Identify and resolve process gaps related to master data, BOM accuracy, lead times, and capacity planning., • Leverage SAP tools to streamline workflows, reduce waste, and improve on-time delivery., • Monitor key KPIs (e.g., schedule adherence, inventory turns, forecast accuracy) using SAP analytics and reporting tools., • Facilitate workshops to define current vs. future-state processes and ensure alignment with SAP capabilities., • Partner with IT and external consultants to ensure system configurations support best practices and scalability., • Conduct post-implementation reviews to assess system adoption and identify further optimization opportunities. Cross-Functional Supply Chain Exposure • Support inventory control and material flow initiatives in collaboration with the Materials Manager., • Assist in procurement process improvements and supplier performance tracking., • Contribute to cost reduction and inventory optimization efforts., • Provide backup support for planning and purchasing activities., • Help maintain accurate master data and support cycle counting and inventory audits., • Apply Lean, Six Sigma, or similar methodologies to drive continuous improvement., • Support change management efforts, including training and documentation., • Contribute to building a culture of accountability and data-driven decision-making., • Prepare for future leadership responsibilities within the Materials or Supply Chain function. Skills and Experience: • Bachelor’s degree in Business, Engineering, Supply Chain, or Information Systems; Master’s degree a plus., • 5–7 years of experience in SAP implementation, continuous improvement, or materials/supply chain roles., • Proven experience with SAP S/4HANA, particularly in MRP, MM, IM, WM, and planning modules., • Lean Six Sigma certification (Green Belt or higher) preferred., • Strong analytical, problem-solving, and project coordination skills., • Demonstrated ability to manage multiple priorities in a dynamic environment., • Excellent communication and stakeholder engagement skills., • Experience in manufacturing or production environments is highly desirable., • Ability to work collaboratively in a matrixed organization and influence across functions. Success Metrics: • Improved MRP accuracy and production planning efficiency., • Increased utilization of SAP S/4HANA Materials functionalities., • Reduction in inventory discrepancies and material shortages., • Enhanced cross-functional collaboration and process ownership., • Delivery of measurable cost savings and operational improvements., • Strengthened continuity and resilience in materials management., • Development of internal talent pipeline for future Materials leadership roles..

Job Description Job Overview: As an Aircraft Maintenance Technician V (AMT V) at ARQ Aviation MX, you will be a senior-level technician, recognized for your expertise in aircraft maintenance and your leadership within the team. AMT V technicians are the most skilled and experienced members of our maintenance staff, responsible for handling advanced diagnostics, complex repairs, and critical inspections to ensure the safety and reliability of our fleet and clients' aircraft. Your role will be pivotal in setting standards, guiding junior technicians, and enhancing our reputation for high-quality, luxury-level service. Duties and Responsibilities: · Ensure comprehension of assigned task(s) before initiating maintenance. If necessary, communicate concerns or questions to the DOM. · Ensure that manufacturer safety precautions are taken before initiating maintenance. · Assist with the quoting, planning, scheduling and billing of maintenance related projects and/or modifications. · Perform all maintenance in accordance with applicable technical data, industry standards, and company policies/procedures. · Perform all maintenance to the highest of quality standards, avoiding any act which may endanger personnel or cause damage to equipment and articles. · Perform maintenance tasks, including but not limited to inspections, repairs, modifications, troubleshooting, component changes, and preventative maintenance. · Perform all maintenance using proper tools and equipment applicable to the task. · Provide continuity of maintenance when work assignment changes occur. · Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries and logbook entries. · Notify the DOM immediately of any condition that arises which might represent a problem or unsafe condition. · Communicate frequently with customers regarding updates and project timelines. · Maintain tools, equipment, and the work area in a safe and orderly condition. · Maintain the appearance and cleanliness of the maintenance facility. · Actively participate in the company’s Continuous Improvement Program (CIP). · Ensure that unairworthy articles or work that is below company standards, is not released by ARQ Aviation MX. · Ensure that work packages are continuously audited and updated. · Perform other duties as assigned. Minimum Qualifications: · Active and current FAA Airframe & Powerplant (A&P) Mechanics License, with current FAA Inspection Authorization. · Minimum of 10 years of General Aviation experience. · Must have thorough understanding of the applicable Federal Aviation Regulations, as well as inspection methods, techniques, and equipment used to determine the quality or airworthiness of articles undergoing maintenance, repair, or alteration. · Proven track record of consistent performance while delivering high levels of customer service to internal and external customers, as required. · Demonstrated record of sound ethical judgement and integrity. · Demonstrated commitment to quality and safety in all maintenance. · Strong oral and written communication skills and the ability to professionally communicate with customers. · Possess adequate tools. · Valid driver’s license with good driving record. Company DescriptionARQ Aviation MX is an off shoot of Cape Fear Coastal Aviation flight school and Cirrus Training center located at the Wilmington International Airport (ILM) in Wilmington NC. Servicing our fleet of aircraft including Cirrus', Cessna, and Diamond as well as third party aircraft.ARQ Aviation MX is an off shoot of Cape Fear Coastal Aviation flight school and Cirrus Training center located at the Wilmington International Airport (ILM) in Wilmington NC. Servicing our fleet of aircraft including Cirrus', Cessna, and Diamond as well as third party aircraft.

Job Description Overview SiteOne Landscape Supply is the largest national distributor of landscaping products across the United States and Canada. As a leading supplier of wholesale goods for green industry professionals, we have a long history of serving those who design, build, and maintain outdoor spaces – from lawns and gardens to golf courses, sport fields and more. We pride ourselves on knowing our customers and their business better than anyone else and providing them with a one-stop shop of extensive inventory covering irrigation, lighting, turf and landscape maintenance, hardscapes, nursery, and pest control supplies. At SiteOne, we are passionate about delivering an outstanding customer experience and will stop at nothing to help our customers win. We know that our associates are the key to this success, and our commitment to the SiteOne DNA and support for our associates through development programs, benefits, and perks align with our vision to "Be a Great Place to Work for Our Associates". We foster a culture of safety, teamwork, and continuous improvement. With over 800 locations and exciting expansion ahead, now is the perfect time to join SiteOne and grow Stronger Together™! Responsibilities Our Bilingual Customer Sales & Service Representatives (CSSRs) are knowledgeable, energetic and consistently deliver the best overall customer experience. To succeed in this role, you need to be passionate and customer obsessed while serving commercial and residential consumers in the green industry. What you’ll do: • Demonstrate exceptional customer service to all SiteOne customers, • Cultivate and manage strong relationships with customers, • Assist customers with their questions and needs, either in person, via the phone or through online ordering, • Pull and prepare inventory orders for customer pick up or delivery, • Proactively identify and capitalize on opportunities to grow sales with current and potential customers, • Partner with branch leadership to understand and implement new technologies and ways of working to help positively impact business performance, • Assist with merchandising product, managing inventory, and other store tasks while maintaining a safe working environment. Qualifications • Minimum of 1 year experience in a retail or wholesale setting, preferred, • Excellent customer service skills Bilingual Proficiency - candidates who are conversational in English/Spanish are preferred • Green industry experience or knowledge of landscape, nursery, or irrigation product a plus, • Ready and willing to learn and adopt new technologies and ways of working, • Ability to think quickly and make sound decisions, • Inventory management experience helpful, • Must be able to lift a minimum of 50 pounds, • Weekly Paychecks with DailyPay available!, • Competitive Compensation, • Medical, Dental and Vision plans, • Paid Time Off, Paid Holidays, • 401k with company match, • Tuition Reimbursement, • Lucrative Associate Referral Program, • Company Apparel and Work Boot Vouchers, • Opportunity for Advancement, • Paid Training and Business Certifications Available, • Free Counseling Services/Employee Assistance Program, • Life Insurance and Short- and Long-Term Disability Insurance, • Product Discounts, • Most Branches never work Sundays! THE INFORMATION CONTAINED HEREIN IS NOT INTENDED TO BE AN EXHAUSTIVE LIST OF ALL RESPONSIBILITIES, DUTIES AND QUALIFICATIONS REQUIRED OF INDIVIDUALS PERFORMING THE JOB. THE QUALIFICATIONS DETAILED IN THIS JOB DESCRIPTION ARE NOT CONSIDERED THE MINIMUM REQUIREMENTS NECESSARY TO PERFORM THE JOB, BUT RATHER AS GUIDELINES. THEY MAY VARY FROM POSITION TO POSITION. SiteOne Landscape Supply is strongly committed to providing equal employment opportunities for all associates and all applicants for employment. All employment decisions at SiteOne-including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination-will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. If you are ever unsure whether a message is really from SiteOne, here’s how to protect yourself from recruiting scams: • SiteOne will never ask for payment, sensitive personal info, or documents over email, messaging apps., or interviews, • SiteOne job related emails will be sent with a @siteone.com. All other variations are likely fraudulent.

Magnet Medical is seeking a travel nurse RN PCU - Progressive Care Unit for a travel nursing job in Wilmington, North Carolina. • Specialty: PCU - Progressive Care Unit, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel The Registered Nurse (RN) in the Progressive Care Unit (PCU) provides intermediate care for patients who require a higher level of monitoring and treatment than in a general medical-surgical unit but do not require the intensive care provided in an ICU. The RN in PCU delivers critical care to patients recovering from surgery, medical procedures, or acute conditions, monitoring their progress and responding to changes in health status. The RN will work collaboratively with the healthcare team to ensure the best possible outcomes for patients in the PCU setting. * Patient Assessment: • Conduct comprehensive assessments of patients with moderate to high acuity, monitoring their physical and emotional needs., • Continuously evaluate vital signs, lab results, and cardiac rhythms for any changes that may indicate a need for intervention., • Identify potential risks and complications, such as arrhythmias, respiratory distress, or post-operative issues, and act accordingly. Patient Care and Monitoring: • Administer prescribed medications and treatments, including IV medications, pain management, and blood products., • Monitor patients with telemetry, arterial lines, and other continuous monitoring devices, adjusting care as necessary., • Provide post-surgical care for patients who have undergone major surgery, including cardiovascular, neurological, or orthopedic procedures., • Manage patients with complex conditions, such as heart failure, respiratory distress, and diabetes. Collaboration: • Work closely with physicians, nurse practitioners, and other healthcare professionals to develop and implement individualized care plans., • Participate in daily rounds and communicate with the team regarding patient condition, response to treatments, and any changes in care plans. Patient Education: • Educate patients and families about the recovery process, treatment plans, medications, and any required lifestyle changes., • Provide guidance on managing chronic conditions, improving health, and preventing readmissions. Documentation: • Accurately document all nursing interventions, patient assessments, outcomes, and any changes in condition using electronic health records (EHR)., • Ensure compliance with all legal, regulatory, and hospital-specific documentation requirements. Safety & Infection Control: • Follow infection control protocols and use appropriate personal protective equipment (PPE) to minimize the risk of hospital-acquired infections., • Respond to changes in patient condition quickly and appropriately, including initiating emergency procedures if needed. Emergency Response: • Recognize and respond promptly to emergencies, including code blue situations or significant changes in patient vital signs., • Perform advanced life support (ALS) or other emergency interventions as required. Teamwork and Support: • Collaborate with PCU colleagues, support staff, and interdisciplinary teams to ensure safe and efficient patient care., • Serve as a resource to less experienced nursing staff and participate in mentoring or training initiatives. Quality and Compliance: • Follow all hospital protocols and national standards to maintain high-quality care, safety, and patient satisfaction., • Participate in quality improvement activities and patient safety initiatives to enhance patient outcomes. Magnet Medical Job ID #34840502. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN - PCU

Magnet Medical is seeking a travel nurse RN Cardiac Stepdown for a travel nursing job in Wilmington, North Carolina. • Specialty: Cardiac Stepdown, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel The Registered Nurse (RN) in the Progressive Care Unit (PCU) provides intermediate care for patients who require a higher level of monitoring and treatment than in a general medical-surgical unit but do not require the intensive care provided in an ICU. The RN in PCU delivers critical care to patients recovering from surgery, medical procedures, or acute conditions, monitoring their progress and responding to changes in health status. The RN will work collaboratively with the healthcare team to ensure the best possible outcomes for patients in the PCU setting. * Patient Assessment: • Conduct comprehensive assessments of patients with moderate to high acuity, monitoring their physical and emotional needs., • Continuously evaluate vital signs, lab results, and cardiac rhythms for any changes that may indicate a need for intervention., • Identify potential risks and complications, such as arrhythmias, respiratory distress, or post-operative issues, and act accordingly. Patient Care and Monitoring: • Administer prescribed medications and treatments, including IV medications, pain management, and blood products., • Monitor patients with telemetry, arterial lines, and other continuous monitoring devices, adjusting care as necessary., • Provide post-surgical care for patients who have undergone major surgery, including cardiovascular, neurological, or orthopedic procedures., • Manage patients with complex conditions, such as heart failure, respiratory distress, and diabetes. Collaboration: • Work closely with physicians, nurse practitioners, and other healthcare professionals to develop and implement individualized care plans., • Participate in daily rounds and communicate with the team regarding patient condition, response to treatments, and any changes in care plans. Patient Education: • Educate patients and families about the recovery process, treatment plans, medications, and any required lifestyle changes., • Provide guidance on managing chronic conditions, improving health, and preventing readmissions. Documentation: • Accurately document all nursing interventions, patient assessments, outcomes, and any changes in condition using electronic health records (EHR)., • Ensure compliance with all legal, regulatory, and hospital-specific documentation requirements. Safety & Infection Control: • Follow infection control protocols and use appropriate personal protective equipment (PPE) to minimize the risk of hospital-acquired infections., • Respond to changes in patient condition quickly and appropriately, including initiating emergency procedures if needed. Emergency Response: • Recognize and respond promptly to emergencies, including code blue situations or significant changes in patient vital signs., • Perform advanced life support (ALS) or other emergency interventions as required. Teamwork and Support: • Collaborate with PCU colleagues, support staff, and interdisciplinary teams to ensure safe and efficient patient care., • Serve as a resource to less experienced nursing staff and participate in mentoring or training initiatives. Quality and Compliance: • Follow all hospital protocols and national standards to maintain high-quality care, safety, and patient satisfaction., • Participate in quality improvement activities and patient safety initiatives to enhance patient outcomes. Magnet Medical Job ID #34982689. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN - PCU

Magnet Medical is seeking a travel nurse RN Cardiac Stepdown for a travel nursing job in Wilmington, North Carolina. • Specialty: Cardiac Stepdown, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel The Registered Nurse (RN) in the Progressive Care Unit (PCU) provides intermediate care for patients who require a higher level of monitoring and treatment than in a general medical-surgical unit but do not require the intensive care provided in an ICU. The RN in PCU delivers critical care to patients recovering from surgery, medical procedures, or acute conditions, monitoring their progress and responding to changes in health status. The RN will work collaboratively with the healthcare team to ensure the best possible outcomes for patients in the PCU setting. * Patient Assessment: • Conduct comprehensive assessments of patients with moderate to high acuity, monitoring their physical and emotional needs., • Continuously evaluate vital signs, lab results, and cardiac rhythms for any changes that may indicate a need for intervention., • Identify potential risks and complications, such as arrhythmias, respiratory distress, or post-operative issues, and act accordingly. Patient Care and Monitoring: • Administer prescribed medications and treatments, including IV medications, pain management, and blood products., • Monitor patients with telemetry, arterial lines, and other continuous monitoring devices, adjusting care as necessary., • Provide post-surgical care for patients who have undergone major surgery, including cardiovascular, neurological, or orthopedic procedures., • Manage patients with complex conditions, such as heart failure, respiratory distress, and diabetes. Collaboration: • Work closely with physicians, nurse practitioners, and other healthcare professionals to develop and implement individualized care plans., • Participate in daily rounds and communicate with the team regarding patient condition, response to treatments, and any changes in care plans. Patient Education: • Educate patients and families about the recovery process, treatment plans, medications, and any required lifestyle changes., • Provide guidance on managing chronic conditions, improving health, and preventing readmissions. Documentation: • Accurately document all nursing interventions, patient assessments, outcomes, and any changes in condition using electronic health records (EHR)., • Ensure compliance with all legal, regulatory, and hospital-specific documentation requirements. Safety & Infection Control: • Follow infection control protocols and use appropriate personal protective equipment (PPE) to minimize the risk of hospital-acquired infections., • Respond to changes in patient condition quickly and appropriately, including initiating emergency procedures if needed. Emergency Response: • Recognize and respond promptly to emergencies, including code blue situations or significant changes in patient vital signs., • Perform advanced life support (ALS) or other emergency interventions as required. Teamwork and Support: • Collaborate with PCU colleagues, support staff, and interdisciplinary teams to ensure safe and efficient patient care., • Serve as a resource to less experienced nursing staff and participate in mentoring or training initiatives. Quality and Compliance: • Follow all hospital protocols and national standards to maintain high-quality care, safety, and patient satisfaction., • Participate in quality improvement activities and patient safety initiatives to enhance patient outcomes. Magnet Medical Job ID #34528169. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN - PCU

Job DescriptionReports To: General Manager or Owner "A mind built for excellence. A spirit built for service." What does a Restoration Project Manager (RPM) with Paul Davis do? • Celebrate completion of projects with a team of skilled tradespeople, homeowners grateful to be back in their homes, and your Paul Davis team members, • Improve your community by serving others, • Continuously learn about improving results and setting proper expectations of others, • Learn new things daily about construction and building homes, • Have fun and be part of a growing business!RPM's work with owners and sub-contractors after traumatic events such as a fire or flood to clean up and repair damage to residential and commercial property. As a RPM, you will manage the renovation, as well as control and communicate the budget effectively. This means you will spend a good deal of time in the field to see your projects get completed properly. Why The Team Needs You? Serving others in their time of need is not easy. We will need you to build foundational relationships based on trust, actively listen, and find ways to manage a team to complete projects successfully. We also want a fun personality that enjoys getting results. Why Join The Team? We are an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider our Restoration Project Managers are on the front lines of restoring their communities by leading others to complete construction projects on budget and up to the industry standard. You will have the autonomy after training to control your schedule and continually seek learning opportunities that will improve your skill set. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Team Compensation and Benefits: • Ongoing Leadership Development Program and industry events, • One on One mentorship, • Three months of structured training to learn the Paul Davis Way, • Access to Paul Davis University and regular training opportunities, • Cell phone and computer provided by company, • Company vehicle and gas reimbursement, • PTO and sick days with flexible schedule, • Base commission on projects completed. Our current RPM's yearly pay range from $50,000 to $100,000 depending on their production. No limit to earning potential. Team Qualifications (Requirements): • Ability to lead and develop team, • Career emphasis on learning and continuing education, • Sound planning and organizational skills, • Excellent communication and presentation skills, • Bachelors Degree or equivalent relevant experienceConstruction project management experience is welcomed if willing to learn a new process. If limited experience but you meet all qualifications, we will invest in your training. Role on the Team (Job Functions): • Meet operational objectives of: Sales, Gross Margin, Brand Experience, • Track metrics during bi-weekly GS&R, • Confirm budget and work orders before start of project., • Ensure compliance with standards and regulations., • Participate in local community events., • Build relationships with key customers direct and B2B., • Seek partnerships to improve performance with vendors and tradesman. Skills Desired of Team Member: • Self-motivated to get results, • Loves working with clients and tradesman, • Effectively schedules ahead while maintaining flexibility, • Thrives under high performance environments, • Excellent interpersonal skills, • Is succinct and professional with written communication, • Loves to work hard, • Enjoys taking care of others Are you Paul Davis? Before You Can Take the Field: We require a drug and background and check. Working Conditions and Physical Requirements: The physical environment requires the employee to work all types of both indoor and outdoor conditions. Frequently required to use personal protective equipment, having ability to stand or walk, occasionally bending, squatting, climbing stairs and lifting up to 50 pounds. Paul Davis is an equal opportunity employer.

Job Description Quality Control Inspector Schedule: Full-Time, 1st shift About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $24-$32/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a Quality Control Inspector, you’ll play a key part in ensuring that every part produced at Master Machining meets or exceeds customer and industry standards. You’ll inspect precision components, perform detailed measurements, and uphold the standards that define our company’s reputation for excellence. Your Responsibilities: • Inspect machined parts using micrometers, calipers, gauges, and other precision tools, • Perform first-article, in-process, and final inspections, • Interpret blueprints, drawings, and specifications to verify part compliance, • Utilize CMM (Coordinate Measuring Machine) or comparable inspection equipment when applicable, • Maintain accurate inspection reports and documentation, • Collaborate with machinists and leadership to resolve quality concerns, • Support continuous improvement initiatives and adherence to ISO 9000 standards What We’re Looking For: • Experience as a Quality Control Inspector in a machining or manufacturing environment, • Strong ability to read blueprints and use precision measurement tools, • Familiarity with ISO 9000 or similar quality systems, • Ability to lift up to 50 lbs safely, • Excellent attention to detail, reliability, and communication skills, • Willingness to work overtime or occasional Saturdays when needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job Description JOB SUMMARY The Medical Director will provide visionary clinical leadership for a comprehensive dementia and cognitive care program, ensuring excellence in patient care, team development, and program innovation. This role combines hands-on clinical work with strategic oversight, advancing best practices in the diagnosis, treatment, and support of individuals with Alzheimer’s disease and other cognitive disorders. The Medical Director will lead multidisciplinary initiatives, foster community and institutional partnerships, and drive continuous improvement in clinical quality, education, and research. PRIMARY JOB DUTIES • Provide direct medical care, including comprehensive assessments, diagnoses, and treatment plans for patients with dementia, Alzheimer’s disease, and other cognitive impairments., • Conduct initial evaluations, follow-up visits, and multidisciplinary consultations addressing medical, behavioral, and psychosocial needs., • Oversee medication management, symptom control, and palliative interventions to enhance patient comfort and functionality., • Collaborate with the care team to develop individualized plans incorporating non-pharmacological therapies such as cognitive stimulation, behavioral management, and family education., • Participate in on-call responsibilities as needed., • Design and implement clinical protocols, quality improvement initiatives, and evidence-based guidelines for dementia care, drawing from leading program models., • Lead program expansion efforts, including integration with hospice services, community outreach, and partnerships with local healthcare providers., • Monitor outcomes such as patient satisfaction, health metrics, and caregiver support effectiveness, using data to guide ongoing improvements., • Ensure compliance with all regulatory standards, including those from the Centers for Medicare & Medicaid Services (CMS), The Joint Commission, and state health authorities., • Serve as a liaison with external stakeholders, including referring physicians, hospitals, and community organizations., • Mentor and collaborate with advanced practice providers, nurses, and support staff, fostering a cohesive, patient-centered team culture., • Develop and deliver training programs for internal and external stakeholders on dementia-related topics such as early detection, advanced care planning, and end-of-life considerations., • Participate in caregiver support initiatives, including educational workshops, support groups, and resource navigation., • Stay current with emerging research in dementia and Alzheimer’s care, incorporating new treatments, therapies, and technologies into practice., • Contribute to clinical research or quality improvement studies, collaborating with academic institutions or national organizations such as the Alzheimer’s Association., • Advocate for the program through presentations, publications, and community engagement to raise awareness and support funding opportunities JOB SPECIFICATIONS • Education: Medical Degree (MD or DO) from and accredited institution., • Licensure / Certifications: Active North Carolina medical license or eligible to obtain one and Certification by the American Board of Internal Medicine, American Board of Family Medicine, or American Board of Psychiatry and Neurology. Completion of related sub-specialty certification (e.g.. Geriatrics, hospice and palliative care) desirable. Valid driver’s license., • Experience: Minimum of 5-7 years of clinical experience in Neurology, Geriatrics, or dementia care, including at least two years in a leadership or supervisory capacity., • Essential Technical / Motor Skills: Strong diagnostic and clinical skills in Neurology and Gerontology, including cognitive assessments, neuroimaging interpretation, and pharmacologic management. Demonstrated expertise in managing Alzheimer’s disease and related dementias within a multidisciplinary care framework. Familiarity with hospice and palliative care models. Experience in program development, quality improvement, or research in cognitive health preferred. Proficiency in electronic health record (EHR) systems and data-driven outcome tracking., • Interpersonal Skills: Exceptional leadership, communication, and interpersonal skills with the ability to inspire teams and engage diverse stakeholders. Empathy and cultural competence in caring for patients and families from varied backgrounds, including rural and underserved populations. Commitment to ethical practice, patient advocacy, and ongoing professional growth. Ability to handle emotionally challenging situations inherent to dementia care., • Essential Physical Requirements: Ability to perform clinical duties, including patient examinations, with occasional travel for home visits or community events., • Essential Sensory Requirements: None, • Exposure to Hazards: None, • Other - Hours of Work: Monday- Friday, 8:00 am – 5:00 pm; occasional after hour commitments including weekend engagements may be required., • Work Environment: Primarily in a clinical office setting, with options for hybrid of flexible scheduling.

Job Description We are seeking a Senior Embedded Software Engineer to join our growing engineering team. This role is ideal for someone passionate about embedded systems, firmware development, and working in a collaborative environment where engineering excellence is valued. Key Responsibilities • Design, implement, and maintain embedded software for microcontroller-based systems, primarily using C., • Develop and maintain firmware across multiple microcontroller platforms., • Collaborate with cross-functional engineering teams on system integration, testing, and debugging., • Contribute to all phases of the development lifecycle: concept, architecture, implementation, validation, and release., • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or related technical field (or equivalent experience)., • Minimum 3 years of professional experience in embedded software development., • Strong proficiency in C programming for resource-constrained systems., • Hands-on experience with microcontrollers, low-level driver development, and peripheral integration., • Experience with debugging and testing tools (logic analyzers, oscilloscopes, in-circuit debuggers)., • Familiarity with version control systems and modern software development workflows., • Strong analytical, problem-solving, and debugging skills., • Ability to work independently and collaboratively in cross-functional teams., • Proficiency with productivity tools (e.g., Microsoft Office or equivalent). Preferred Skills • Experience with RTOS-based systems or firmware development for embedded applications., • Knowledge of hardware/software co-design principles.

Job DescriptionSalary: Learning & Development Lead Wilmington, NC | Global Laser Enrichment (GLE) Full-Time | On-Site Q-Clearance Required or Eligible AtGlobal Laser Enrichment (GLE), were driving innovation in uranium enrichment and advancing the future of clean energy. Were seeking a Training, Learning & Development Lead to shape, strengthen, and align training and qualification programs across our organization. This role offers the opportunity to directly impact organizational performance and culture by developing training strategies that ensure excellence, compliance, and continuous improvement. If youre passionate about leading learning initiatives that elevate both people and processes, this is your chance to make a lasting difference. Why Join GLE? • Play a key role in building and maintaining a high-performance workforce., • Collaborate with cross-functional leaders and technical experts in a fast-paced environment., • Lead innovative training and qualification programs that directly support operational success., • Enjoy competitive compensation, strong benefits, and professional growth opportunities. What Youll Do • Partner with subject matter experts to design, develop, and implement training materials., • Apply the Systematic Approach to Training (SAT) process across all phases: analysis, design, development, implementation, and evaluation., • Oversee the Absorb LMS platform and company training intranet., • Support leadership and line management in developing and maintaining qualification programs., • Conduct self-assessments, benchmarking, and training program evaluations., • Maintain compliance with INPO, NRC, and site-specific training standards., • Coordinate across departments to align training schedules, priorities, and resources., • Oversee the lifecycle of multiple concurrent training programs to ensure effective delivery., • Provide onboarding and ongoing guidance to employees and instructors on learning processes., • Stay informed on industry trends, regulatory changes, and emerging learning technologies. What Youll Bring • Bachelors degree in engineering, scientific, or related field (advanced degree or equivalent experience preferred)., • 12+ years of experience developing and managing training programs, ideally within a commercial nuclear environment., • Proven experience applying the Systematic Approach to Training (SAT) method., • Strong understanding of adult learning principles and modern instructional design., • Excellent organization, communication, and stakeholder management skills., • Demonstrated success leading cross-functional programs in a dynamic, fast-paced setting., • U.S. Citizenship and the ability to obtain and maintain a DOE/NRC Q-Clearance. Preferred Qualifications • Experience in a nuclear facility (e.g., licensed operator, maintenance, or engineering)., • INPO Instructor Certification or certification in Instructional Design/Adult Learning., • Strong knowledge of nuclear plant systems, safety, and training protocols., • Expertise managing and implementing SAT-based training programs. Important Note Due to the nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.

Job DescriptionSalary: Quality Assurance Manager Wilmington, NC | Global Laser Enrichment (GLE) Full-Time | On-Site Q-Clearance Required or Eligible At Global Laser Enrichment (GLE), were shaping the future of nuclear technology through innovation, safety, and precision. Were seeking an experienced Quality Assurance Manager to lead the design, implementation, and continuous improvement of GLEs quality assurance programs, ensuring compliance, reliability, and excellence across all operations and suppliers. In this critical role, youll collaborate across engineering, operations, and leadership teams to uphold the highest standards of quality and nuclear safety while advancing next-generation enrichment technology. Why Join GLE? • Be part of a mission that powers clean energy and national security., • Lead quality initiatives that impact first-of-a-kind nuclear technology., • Collaborate with high-performing professionals in a dynamic, growth-focused environment., • Competitive pay, comprehensive benefits, and career development opportunities. What Youll Do • Develop and maintain GLEs quality assurance program across design, construction, operations, and maintenance., • Establish and enforce QA standards, processes, and procedures in alignment with ASME, NFPA, ISO, and regulatory requirements., • Oversee internal and supplier audit programs to ensure compliance and performance excellence., • Identify, track, and resolve quality-related issues across projects and vendors., • Manage CAPA (Corrective and Preventive Action) processes, ensuring effective root cause analyses and lasting solutions., • Mentor and certify QA personnel and auditors; champion a culture of quality and continuous improvement., • Manage budgets, departmental performance, and external relationships with auditors, regulators, and certification bodies., • Stay current with industry trends, standards, and emerging best practices in nuclear quality assurance., • Promote a strong nuclear safety and quality culture throughout the organization. What Youll Bring • Bachelors degree in Engineering or related technical discipline., • 10+ years of experience in engineering or manufacturing QA, with 5+ years in nuclear-related QA., • Deep understanding of ASME NQA-1, ISO 9000, 10 CFR 50 Appendix B, and commercial grade dedication processes., • Proven experience leading audits and compliance programs., • Strong analytical, problem-solving, and leadership skills., • Excellent written and verbal communication, including technical reporting., • U.S. Citizenship with the ability to obtain and maintain a DOE/NRC Q-Clearance (or active clearance preferred)., • Proficiency in Microsoft Office Suite and QA software tools. Preferred Qualifications • Active DOE/NRC Q-Clearance or equivalent (DOD Top Secret)., • Advanced degree in Engineering or related field., • Certified NQA-1 Lead Auditor or equivalent certification., • Experience with UF6 processing, enrichment systems, or nuclear fuel cycle technologies., • Background in EPC (Engineering, Procurement, Construction) or nuclear facility operations., • Familiarity with NRC licensing and compliance processes. Important Note Due to the sensitive nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.

Job Description Overview SiteOne Landscape Supply is the largest national distributor of landscaping products across the United States and Canada. As a leading supplier of wholesale goods for green industry professionals, we have a long history of serving those who design, build, and maintain outdoor spaces – from lawns and gardens to golf courses, sport fields and more. We pride ourselves on knowing our customers and their business better than anyone else and providing them with a one-stop shop of extensive inventory covering irrigation, lighting, turf and landscape maintenance, hardscapes, nursery, and pest control supplies. At SiteOne, we are passionate about delivering an outstanding customer experience and will stop at nothing to help our customers win. We know that our associates are the key to this success, and our commitment to the SiteOne DNA and support for our associates through development programs, benefits, and perks align with our vision to "Be a Great Place to Work for Our Associates". We foster a culture of safety, teamwork, and continuous improvement. With over 800 locations and exciting expansion ahead, now is the perfect time to join SiteOne and grow Stronger Together™! Responsibilities As a part of our dedicated team, Drivers are responsible for operating SiteOne vehicles to deliver world class service and products to our customers. Drivers are responsible for loading and unloading trucks, in addition to working with teammates to ensure the branch is operating successfully. What you’ll do: • Load and unload products for deliveries, • Make deliveries and ensure product arrives undamaged, • Operate vehicle in accordance with local, state, and federal transportation regulations, • Perform job duties within our safety guidelines. Job duties include, but are not limited to:, • Lifting and managing heavy objects, • Working in all weather conditions (drivers must be prepared to work in hot and cold temperatures)., • Maintain and protect all property entrusted to you, • Partner with branch leadership to understand and implement new technologies and ways of working to help positively impact business performance, • Assist in maintaining the cleanliness of the store and other general duties while not driving Qualifications • Valid state driver’s license, • Driving experience, preferred, • Ability to read and write to record and maintain daily records, • Ability to perform regular bending, lifting up to 50 lbs., stretching, and reaching both below the waist and above the head, • Ready and willing to learn and adopt new technologies and ways of working, • Knowledge of landscape, nursery, and irrigation products is a plus!, • Electric pallet jack and/or forklift experience is a plus!, • Weekly Paychecks with DailyPay available!, • Competitive Compensation, • Medical, Dental and Vision plans, • Paid Time Off, Paid Holidays, • 401k with company match, • Tuition Reimbursement, • Lucrative Associate Referral Program, • Company Apparel and Work Boot Vouchers, • Opportunity for Advancement, • Paid Training and Business Certifications Available, • Free Counseling Services/Employee Assistance Program, • Life Insurance and Short- and Long-Term Disability Insurance, • Product Discounts SiteOne Landscape Supply is strongly committed to providing equal employment opportunities for all associates and all applicants for employment. All employment decisions at SiteOne-including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination-will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. If you are ever unsure whether a message is really from SiteOne, here’s how to protect yourself from recruiting scams: • SiteOne will never ask for payment, sensitive personal info, or documents over email, messaging apps., or interviews, • SiteOne job related emails will be sent with a @siteone.com. All other variations are likely fraudulent.

Job DescriptionSalary: Document Control & Records Manager Wilmington, NC | Global Laser Enrichment (GLE) Full-Time | On-Site Q-Clearance Required or Eligible At Global Laser Enrichment (GLE), were redefining the future of nuclear technology with innovation, precision, and integrity. Were seeking a Document Control & Records Manager to lead the development, organization, and oversight of our document and records management systems in compliance with federal and industry standards. This role is ideal for an experienced professional who thrives in a regulated, technical environment and has a passion for ensuring data integrity, security, and compliance. Youll play a pivotal role in protecting critical information, supporting audits, and guiding documentation best practices across the organization. Why Join GLE? • Be part of a mission that drives innovation and national security., • Lead a team managing mission-critical technical documentation., • Collaborate across engineering, operations, and compliance teams., • Enjoy competitive compensation, comprehensive benefits, and career growth opportunities. What Youll Do • Oversee GLEs comprehensive records management program, including classified and unclassified materials., • Act as the companys authority on document control and records management, advising leadership on compliance and best practices., • Develop, implement, and enforce policies and procedures for document creation, marking, retention, storage, and destruction., • Manage and mentor a team of Document Management Specialists and Technical Writers, ensuring high-quality work and compliance., • Lead the creation, revision, and control of technical and procedural documents such as programs, manuals, and instructions., • Maintain secure access, permissions, and revision controls within electronic document management systems (EDMS)., • Conduct and support internal and external audits, addressing findings and ensuring continuous improvement., • Provide training and education on document control and records management principles., • Stay current on regulatory changes, standards, and technologies impacting documentation practices., • Collaborate across departments to enhance accessibility, accuracy, and efficiency of document systems. What Youll Bring • Bachelors degree in Business Administration, Technical Communication, Information Management, or related field., • 7+ years of document management and technical writing experience, including 3+ years in a supervisory or managerial capacity., • Expertise in records management, regulatory compliance, and documentation systems., • Strong written and verbal communication skills with exceptional attention to detail., • Proficiency in Microsoft Office Suite and document management software., • U.S. Citizenship with the ability to obtain and maintain a DOE/NRC Q-Clearance. Preferred Qualifications • Experience in the nuclear industry and familiarity with NQA-1 standards., • Advanced understanding of federal regulations related to nuclear documentation., • Experience leading teams using DevonWay or similar document management systems., • Proven track record managing documentation in highly regulated technical environments. Important Note Due to the sensitive nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.

Job Description About Us We are a global leader in precision engineering and manufacturing, committed to delivering high-quality solutions across industries. Our team thrives on innovation, collaboration, and technical excellence. With a strong focus on continuous improvement and customer satisfaction, we empower our employees to drive meaningful impact through their expertise and dedication. Join us and be part of a company that values integrity, performance, and professional growth. Position Summary We are seeking a dynamic and detail-oriented Metrology Engineer – Calibration Leader to oversee and manage calibration activities across our operations. This role is critical to ensuring the accuracy and reliability of measurement systems and equipment used in production and quality control. The successful candidate will lead the calibration team, develop and maintain calibration procedures, and ensure compliance with industry standards and internal requirements. This position offers the opportunity to shape metrology strategy, support audits, and collaborate with cross-functional teams to drive excellence in measurement and calibration processes. Preferred Qualifications • Experience leading calibration or metrology teams in a manufacturing environment, • Familiarity with ISO/IEC 17025 and related quality standards, • Strong analytical skills and proficiency in statistical tools for measurement system analysis, • Bachelor’s degree in Engineering, Metrology, or related technical field, • Minimum 3 years of experience in calibration, metrology, or quality engineering, • Knowledge of calibration methods, equipment, and documentation practices Please note: Candidates must have legal authorization to work in the United States. Visa sponsorship is not available for this position. You should be proficient in: • ISO 9001 Certification Experience

Job DescriptionFinishing Operations Team Lead - Machined Components Is this you? • Do you enjoy guiding a team while staying hands-on with tools?, • Can you plan deburring tactics from drawings, routings, and travelers to hit finish specs the first time?, • Lead by example—support teammates and foster a collaborative environment., • Execute deburring on simple to highly complex parts within established parameters, minimizing scrap and meeting output goals., • Plan and select the right deburring tools and methods; interpret finish specifications, process drawings, routings, and travelers., • Deploy the full range of deburring equipment and hand tools to ensure every part meets or exceeds expectations., • Trace issues to their root cause and drive corrective actions to closure., • Read/interpret engineering drawings and finish specifications with precision., • Keep the workspace spotless—sweep, organize, and maintain 5S standards., • Champion lean/continuous improvement to enhance safety, quality, and throughput., • Identify unsafe conditions and maintain a safe work environment., • Capture data accurately and complete all required documentation., • Adhere to the Quality Management System in full., • Distribute work evenly across the team; ensure jobs meet schedule commitments., • Take on other assignments as needed. What you bring, • Comfort with deburring/finishing and precision measuring tools (preferred, not required)., • Ability to read, write, and understand technical documentation; computer literate; able to read process drawings/blueprints., • Physical capability for routine and heavy tasks; full range of motion., • 3–5 years of grinding experience in a precision manufacturing setting preferred., • Knowledge of GD&T. Preferred proficiencies, • Troubleshooting Skills, • Supervisory Experience, • Deburring Experience, • Mechanical Assembly Skills, • Packaging Experience, • Manual Machining Skills, • Excellent Communication Skills, • Experience in a Manufacturing Environment Compliance Must be over 18 years of age and authorized to work in US.

Job Description CNC Lathe Lead / Foreman Machinist – 2nd Shift | Lead a Skilled Team at Master Machining, Inc. Schedule: Full-Time | 2nd Shift Required About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $29 – $46/hour (based on experience), • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As the CNC Lathe Lead / Foreman Machinist, you’ll oversee a small team of machinists on 2nd shift, ensuring production goals, quality standards, and training expectations are consistently met. You’ll serve as both a skilled hands-on machinist and a mentor who drives precision, safety, and efficiency on the shop floor. Your Responsibilities: • Program, set up, and operate CNC lathe machines, • Supervise and support machinists in daily production tasks, • Verify dimensions and tolerances using precision measuring tools, • Read and interpret blueprints, job tickets, and technical drawings, • Ensure all parts meet print specifications and quality standards, • Perform regular machine maintenance and tool adjustments, • Manage workflow priorities and communicate with leadership to meet deadlines, • Train and mentor junior machinists to uphold Master Machining standards What We’re Looking For: • 3–5 years of CNC lathe machining experience, • Proven experience leading or supervising others in a machining environment, • Strong understanding of G-code programming and machine setup, • Ability to work within tight tolerances and high precision standards, • Skilled at reading blueprints and using measuring equipment, • Excellent communication and problem-solving skills, • Reliable, self-motivated, and dedicated to continuous improvement, • Willingness to work overtime or Saturdays as needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job DescriptionWhat does a Cleaning Technician with Paul Davis do? • Be part of a team of hardworking individuals serving others within your community, • Make a difference for others that have had a disaster strike their property, • Take pride when your team completes mitigation projects Built upon principles of customer service, dynamic decision-making, and leadership, we have the tools to continue our rapid growth. Our team puts emphasis on living our Vision, Mission, and Values to be more than just a service provider. You are essential to coordinate teams effectively and ensure that jobs are performed profitably. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why the Team Needs You? Serving others after a disaster has struck their property is not easy. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail, and love to help people. It is challenging to make customers happy when faced with a traumatic event, but you will love being a Cleaning tech if you take pride in your work and have fun while working with others. You will be practicing continuous improvement every day as you work to improve the performance of your team! Team Compensation and Benefits: • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability to flex hours that ensures team members get the time they need for personal matters while still being able to work full time., • Paid training, • Referral program, • Great culture and team dynamic, • Hourly pay: based on experience and certifications, • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Ability to work with others from diverse backgrounds, • Clean criminal background check, • Ability to pass a drug test, • Have the ability to work nights/weekends and overtime, if needed, • Demonstrate skill and proficiency in structural cleaning techniques, • Self-managing and time management skills, • Detail-oriented, • Focus and dedication to providing excellent customer service., • Assist other team members when needed and foster a positive working relationship with other departments., • Be a great representative of our brand!, • Manage/organize contents warehouse, • Demonstrate skill and proficiency in content cleaning techniques, • Re-inspect job sites for quality control. We support and hire Veterans and we are an Equal Opportunity Employer

Job Description About us Bateman Civil Survey is a leading land surveying and civil engineering firm headquartered in the heart of Apex, North Carolina. We have been providing premium services across this great state and throughout the East Coast for over twenty years. We have an unparalleled commitment to customer satisfaction and employee well-being. Each engineer, technician, project manager, and administrator are part of a team that recognizes the inherent value of its every member. We take pride in our work and love what we do. We take full advantage of the advances in equipment and technology and are driven to learn and grow at the pace of the world around us. We are looking for team members and leaders that will help us continue to move from “the way we’ve always done it” to a greater level of efficiency and quality than we’ve ever known. That’s where you come in – won’t you join us? About the position The individual in this role is responsible for training, mentoring, and evaluating the performance of survey technicians, ensuring the team is well-coordinated and effective. The ideal candidate possesses excellent communication skills, demonstrates strong problem-solving abilities, and shows a commitment to continuous learning and improvement. A deep understanding of advanced surveying technology and methodologies, along with substantial field experience, is essential for success in this role. Requirements • High school diploma or equivalent., • 3-5 years of surveying experience, with some leadership or supervisory experience., • Willingness to work outdoors and in various weather conditions., • Experience in construction staking, boundary, topo, etc., • Familiarity with Trimble software and equipment., • Valid driver's license with minimum 5 years driving experience and clean driving record, • Health Insurance, • Health Savings Account, • Company-Paid Dental Insurance, • Company-Paid Life Insurance, • Company-Paid Long Term Disability Insurance, • Company-Paid Short Term Disability Insurance, • 401(k) & Roth Plans with Matching, • Tuition Assistance, • Personal Time Off (PTO), • Paid Bereavement Leave, • Paid Holidays, • Career development opportunities, • A commitment to utilizing the latest state-of-the-art technologies Pay: • Starting at $25/hour depending on experience. Apply online today at ! Bateman Civil Survey Company (BCSC) is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), age (40 or older), disability or genetic information (including family medical history), national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Master Machining, Inc. CNC Machinist – 1st & 2nd Shift Opportunities | Join Our Growing Team About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $26–$40/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a CNC Machinist, you’ll help bring our customers’ designs to life using precision CNC milling equipment. You’ll work with tight tolerances, quality materials, and a team that values pride in workmanship and continuous improvement. Your Responsibilities: • Program, set up, and operate CNC milling machines, • Verify dimensions and tolerances using precision measuring instruments, • Read and interpret blueprints, job tickets, and production drawings, • Perform regular machine maintenance and tool adjustments, • Collaborate with teammates to maintain quality and meet production goals What We’re Looking For: • 3–5 years of CNC machining experience, • Strong understanding of G-code programming and machine setup, • Ability to read and interpret technical drawings, • Reliable, detail-oriented, and eager to produce top-quality work, • Comfortable working with both large and small components, • Willingness to work overtime or Saturdays when needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job Description About us Bateman Civil Survey is a leading land surveying and civil engineering firm headquartered in the heart of Apex, North Carolina. We have been providing premium services across this great state and throughout the East Coast for over twenty years. We have an unparalleled commitment to customer satisfaction and employee well-being. Each engineer, technician, project manager, and administrator are part of a team that recognizes the inherent value of its every member. We take pride in our work and love what we do. We take full advantage of the advances in equipment and technology and are driven to learn and grow at the pace of the world around us. We are looking for team members and leaders that will help us continue to move from “the way we’ve always done it” to a greater level of efficiency and quality than we’ve ever known. That’s where you come in – won’t you join us? About the position The individual in this role must possess a deep understanding of surveying principles and CAD techniques, as well as the ability to work independently on more complex drafting tasks. A CAD Technician will create and edit intricate drawings, perform advanced calculations, conduct comprehensive land survey research, and ensure all CAD work meets the highest standards of precision and accuracy. This individual will also confirm that all drawings and maps accurately represent the surveyed data while adhering to project specifications and industry standards. The Survey CAD Technician takes on a mentorship role, guiding and assisting less experienced technicians in their work. This role requires a proficient understanding of both surveying and CAD software, excellent communication skills, and a commitment to continuous learning and improvement. Requirements • Exceptional attention to detail, • Advanced problem-solving skills, • Advanced understanding of CAD and Surveying principles., • Ability to manage multiple projects simultaneously., • Ability to share knowledge and provide support to less experienced CAD Technicians, • Experience with subdivisions and plots., • Basic understanding and ability to read construction plans, procedures and perform field calcs., • A commitment to continuous learning and development, with a willingness to stay updated on the latest CAD software and surveying technologies., • Familiarity with other relevant software (such as GIS or BIM software) and technology used in surveying and civil engineering., • Health Insurance, • Health Savings Account, • Company-Paid Dental Insurance, • Company-Paid Life Insurance, • Company-Paid Long Term Disability Insurance, • Company-Paid Short Term Disability Insurance, • 401(k) & Roth Plans with Matching, • Tuition Assistance, • Personal Time Off (PTO), • Paid Bereavement Leave, • Paid Holidays, • Career development opportunities, • A commitment to utilizing the latest state of the art technologies Bateman Civil Survey Company (BCSC) is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), age (40 or older), disability or genetic information (including family medical history), national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionSalary: Nuclear Facility Equipment Operator - CLEARED Wilmington, NC | Global Laser Enrichment (GLE) Full-Time | On-Site | Shift Work Required Q-Clearance Required At Global Laser Enrichment (GLE), we are pioneering uranium enrichment technology that will shape the future of clean energy and national security. We are seeking a Nuclear Facility Equipment Operator to support the safe and efficient operation of our enrichment systems. Working under the direction of the Shift Supervisor, you will monitor, control, and operate facility equipment while ensuring compliance with NRC regulations and internal procedures. This role is vital to maintaining plant performance and supporting operational milestones. Why Join GLE? • Be part of a mission-critical program with national and global impact., • Gain hands-on experience with state-of-the-art enrichment equipment., • Contribute to a culture of safety, compliance, and continuous improvement., • Competitive compensation, shift differential, and strong benefits package. What Youll Do • Operate, monitor, and control UF6 enrichment equipment., • Start and stop plant systems as required for operations., • Monitor operating parameters and respond to alarms in compliance with facility procedures., • Record and analyze operational data, supporting engineering and safety reviews., • Perform administrative tasks including shift turnovers, logs, and reporting., • Support NRC compliance and conduct-of-operations standards., • Respond to facility transients and assist in mitigation efforts., • Support equipment maintenance and commissioning activities., • Participate in lockout/tagout procedures, corrective action programs, and procedure improvements., • Actively engage in initial and continuing training to maintain station qualifications. What Youll Bring • Associate degree preferred, high school diploma required., • 2+ years of relevant plant experience (nuclear power plant, Navy nuclear propulsion, or similar)., • An active DOE/NRC Q-Clearance (or an active DOD Top Secret Clearance)., • Knowledge of nuclear plant systems and health physics procedures., • Ability to troubleshoot plant equipment and generate maintenance requests., • Strong attention to detail and ability to follow procedures with accuracy., • Proficiency in technical documentation, log keeping, and data analysis., • Willingness to work off-normal shifts and extended hours as needed. Preferred Background • Prior experience as a nuclear operator or equivalent in a highly regulated environment., • Demonstrated ability to apply human performance tools in daily operations., • Experience supporting commissioning and system modifications in industrial facilities. Important Note Due to the sensitive nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.

Job Description Overview SiteOne Landscape Supply is the largest national distributor of landscaping products across the United States and Canada. As a leading supplier of wholesale goods for green industry professionals, we have a long history of serving those who design, build, and maintain outdoor spaces – from lawns and gardens to golf courses, sport fields and more. We pride ourselves on knowing our customers and their business better than anyone else and providing them with a one-stop shop of extensive inventory covering irrigation, lighting, turf and landscape maintenance, hardscapes, nursery, and pest control supplies. At SiteOne, we are passionate about delivering an outstanding customer experience and will stop at nothing to help our customers win. We know that our associates are the key to this success, and our commitment to the SiteOne DNA and support for our associates through development programs, benefits, and perks align with our vision to "Be a Great Place to Work for Our Associates". We foster a culture of safety, teamwork, and continuous improvement. With over 800 locations and exciting expansion ahead, now is the perfect time to join SiteOne and grow Stronger Together™! Responsibilities As a part of our dedicated team, CDL Drivers will be operating a SiteOne vehicle to deliver world-class service and landscape, nursery, forestry, and irrigation products to our customers. CDL Drivers are also responsible for loading and unloading trucks in addition to working with teammates to ensure the branch is operating successfully. What you’ll do: • Operate vehicle in accordance with local, state and federal transportation regulations, • Demonstrate exceptional customer service to all SiteOne customers, • Cultivate and manage strong relationships with customers, • Assist customers with their questions and needs, either in person or over the phone, • Pull and prepare inventory orders for customer pick up or delivery, • Partner with branch leadership to understand and implement new technologies and ways of working to help positively impact business performance, • Assist with other branch responsibilities as needed Qualifications • Valid Class B CDL license. Class A CDL licensees are also welcome!, • Experience operating a Manual shift may be preferred, • Experience operating a Moffett or other truck-mounted forklift may be preferred, • Ability to read and write to record and maintain daily records, • Ability to perform physical requirements such as bending, lifting, stretching and reaching both below the waist and above the head on a daily basis, • Ability to lift up to 50lbs, • Ready and willing to learn and adopt new technologies and ways of working, • Weekly Paychecks with DailyPay available!, • Competitive Hourly Compensation, • Local Deliveries Only - Home Nightly!, • Medical, Dental and Vision plans, • Paid Time Off, Paid Holidays, • 401k with company match, • Tuition Reimbursement, • Lucrative Associate Referral Program, • Company Apparel and Work Boot Vouchers, • Opportunity for Advancement, • Paid Training and Business Certifications Available, • Free Counseling Services/Employee Assistance Program, • Life Insurance and Short- and Long-Term Disability Insurance, • Product Discounts, • Most Branches never work Sundays! THE INFORMATION CONTAINED HEREIN IS NOT INTENDED TO BE AN EXHAUSTIVE LIST OF ALL RESPONSIBILITIES, DUTIES AND QUALIFICATIONS REQUIRED OF INDIVIDUALS PERFORMING THE JOB. THE QUALIFICATIONS DETAILED IN THIS JOB DESCRIPTION ARE NOT CONSIDERED THE MINIMUM REQUIREMENTS NECESSARY TO PERFORM THE JOB, BUT RATHER AS GUIDELINES. THEY MAY VARY FROM POSITION TO POSITION. SiteOne Landscape Supply is strongly committed to providing equal employment opportunities for all associates and all applicants for employment. All employment decisions at SiteOne-including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination-will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. If you are ever unsure whether a message is really from SiteOne, here’s how to protect yourself from recruiting scams: • SiteOne will never ask for payment, sensitive personal info, or documents over email, messaging apps., or interviews, • SiteOne job related emails will be sent with a @siteone.com. All other variations are likely fraudulent.

Job Description About us Bateman Civil Survey is a leading land surveying and civil engineering firm headquartered in the heart of Apex, North Carolina. We have been providing premium services across this great state and throughout the East Coast for over twenty years. We have an unparalleled commitment to customer satisfaction and employee well-being. Each engineer, technician, project manager, and administrator are part of a team that recognizes the inherent value of its every member. We take pride in our work and love what we do. We take full advantage of the advances in equipment and technology and are driven to learn and grow at the pace of the world around us. We are looking for team members and leaders that will help us continue to move from “the way we’ve always done it” to a greater level of efficiency and quality than we’ve ever known. That’s where you come in – won’t you join us? About the position The individual in this role holds a pivotal role, overseeing the successful execution of surveying projects from initiation through to completion. Responsible for project planning, resource allocation, and leadership of a diverse team of surveying professionals, this individual ensures that all surveying work is conducted accurately, efficiently, and in compliance with industry standards and regulations. Key responsibilities include client liaison, technical oversight, budget management, and quality assurance. The Survey Project Manager excels in communication, problem-solving, and has a keen eye for detail, ensuring that client expectations are met, and projects are delivered on time and within budget. Through effective team management and technical expertise, they contribute to the growth and success of the organization, fostering a culture of excellence and continuous improvement in surveying practices. Requirements • Bachelor’s Degree in Surveying, Civil Engineering, Geomatics, or a related field preferred but not required. Some positions might accept equivalent work experience in lieu of a degree., • Proficient with the latest AutoCAD and Civil 3D software., • Professional Land Surveyor (PLS) preferred., • Health Insurance, • Health Savings Account, • Company-Paid Dental Insurance, • Company-Paid Life Insurance, • Company-Paid Long Term Disability Insurance, • Company-Paid Short Term Disability Insurance, • 401(k) & Roth Plans with Matching, • Tuition Assistance, • Personal Time Off (PTO), • Paid Bereavement Leave, • Paid Holidays, • Career development opportunities, • A commitment to utilizing the latest state of the art technologies Bateman Civil Survey Company (BCSC) is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), age (40 or older), disability or genetic information (including family medical history), national origin, disability status, protected veteran status, or any other characteristic protected by law