Trabajos electrical en Albuquerque, New Mexico - Page 2Crear alertas

Job DescriptionThe primary role of the Mechanic is to diagnose and repair fleet and equipment in order to optimize the needs of operations and minimize equipment down time. Essential Responsibilities • Inspect, diagnose, adjust and repair power train, electrical, suspension, brake, hydraulic and air systems on vehicles and equipment., • Assist in execution of preventative maintenance program by performing oil and fluid changes, tire rotations, brake inspections, CHP BIT inspections, etc., • Perform on-road emergency service calls., • Make recommendations for parts, equipment and fabrication orders., • Utilizes vehicle computer electronics systems to interpret failure modes to initiate repairs., • Utilize fleet management software to perform data entry, maintain accurate records and prepare various reports upon request, paying close attention to accuracy and detail., • Utilize service manuals as well as online technical resources, service literature and diagnostic software., • Observe and comply with hazardous waste and material handling and disposal procedures and regulations as set forth by local, state and federal environmental and health agencies., • Observe and comply with all applicable safety regulations, rules, policies and procedures., • Maintain clean, safe and organized work space., • Maintain collaborative working relationship with drivers, operators and coworkers and communicate timeline for downed vehicles., • Mentor and provide assistance to Mechanic Trainees., • Diesel and/or compressed natural gas engines, heavy equipment mechanical components and parts., • Methods, tools, equipment and systems used in the inspection, diagnosis and repair of trucks and heavy equipment., • Vehicle computer diagnostic systems and fleet management software., • Maintain a positive attitude with coworkers., • Proactively establish trust and credibility with coworkers by maintaining accountability., • Contribute to the team dynamic by promoting inclusion, support and collaboration amongst coworkers., • Take initiative, self-manage time and productivity through multitasking., • Effectively and concisely communicate both orally and in writing., • Think independently and creatively to problem solve. Education, Training & Experience, • One year of related experience servicing diesel engines required., • High school diploma or GED preferred., • Experience in the resource recovery industry a plus., • Certifications a plus., • Class B license a plus. This description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, effort, work conditions, and benefits associated with the job.

Job Description Air Care New Mexico is looking for a dependable, motivated, and experienced HVAC/R Service Technician to join our growing team. We take pride in providing high-quality residential and commercial HVAC services throughout New Mexico while maintaining honest customer relationships and strong workmanship standards. If you are someone who enjoys solving problems, working independently, and delivering excellent customer service, we want to hear from you. Job Responsibilities • Diagnose, repair, and service residential and commercial HVAC/R systems, • Perform preventative maintenance on heating, cooling, ventilation, and refrigeration equipment, • Troubleshoot electrical, mechanical, and airflow issues, • Install replacement parts and components as needed, • Complete accurate service documentation and communicate findings with customers, • Maintain a clean, safe, and professional work environment, • Participate in on-call rotation when scheduled, • HVAC/R experiencerequired, • EPA Certification required, • Journeyman license preferred, • Valid driver’s license with clean driving record, • Ability to troubleshoot and repair HVAC/R systems independently, • Strong communication and customer service skills, • Ability to work in various weather conditions and lift equipment as needed, • Competitive pay based on experience, • Company vehicle, • Paid holidays and paid time off, • Ongoing training and professional development, • Supportive team environment At Air Care New Mexico, we value honesty, reliability, quality workmanship, and teamwork. We are building a company culture where employees are respected, supported, and given opportunities to grow their careers. Apply Today If you’re ready to join a professional HVAC company that values its technicians and takes pride in quality work, we’d love to hear from you. Company DescriptionAir Care New Mexico is a family owned and operated HVAC/R contractor servicing the Albuquerque metropolitan area. We provide a wide range of commercial and residential services. Employment with Air Care New Mexico offers competitive pay, a friendly work experience, and opportunity for growth and development.Air Care New Mexico is a family owned and operated HVAC/R contractor servicing the Albuquerque metropolitan area. We provide a wide range of commercial and residential services. Employment with Air Care New Mexico offers competitive pay, a friendly work experience, and opportunity for growth and development.

Job Description Raven Defense Corporation Albuquerque, NM Company Overview: Raven Defense Corporation is a cutting-edge technology company based in Albuquerque, NM, specializing in engineering services, expert program consultation, and advanced technical equipment. Our focus areas include cybersecurity compliance, deployable sensors, and research, development, test, and evaluation (RDT&E) systems. Founded in 2018 as a privately held small business, we pride ourselves on being an agile and responsive partner that adapts to evolving customer needs in the defense and aerospace sectors. Position Overview: Raven Defense is seeking a highly capable and multi-talented Electrical Technician to support the build and integration of complex electro-mechanical assemblies. This role involves working with RF circuits, digital components, printed circuit boards (PCBs), and large mechanical structures. The ideal candidate will collaborate with cross-functional engineering teams to fabricate, wire, build, and integrate cutting-edge systems for defense and aerospace applications. Key Responsibilities: • Work closely with the Technical Integration Manager to support electrical system assembly, wiring, and integration., • Assist in the fabrication and installation of electrical and mechanical components., • Read and interpret electrical schematics, wiring diagrams, and technical documentation., • Perform hands-on troubleshooting of electronic and mechanical systems., • Maintain a high level of precision and attention to detail when working with RF, digital, and mechanical assemblies., • Adapt to changing schedules, multiple projects, and short-turnaround tasks in a fast-paced environment., • Gain a thorough understanding of the full design lifecycle, with the ability to contribute beyond core responsibilities., • High School Diploma, GED, or equivalent., • Demonstrated experience in hands-on assembly of mechanical or electrical systems., • Ability to work both independently and collaboratively, managing multiple priorities under pressure., • Strong mechanical aptitude and technical problem-solving skills., • Proven track record of high performance in a fast-paced, high-stress environment., • Experience with technology integration in the defense and/or aerospace industry., • Background in electronics or mechanical systems within industries such as automotive, manufacturing, or production., • Familiarity with diagnostic, integration, and test equipment., • Occasional travel (up to 25%) is required for this role., • U.S. Citizenship is required for this position., • Work on innovative defense and aerospace technologies., • Be part of an agile, high-performance team that values precision and expertise. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift minimum, • Monday to Friday Raven Defense Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training Company DescriptionRaven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.Raven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.

Job Description Infinity’s niche in the aerospace and defense industry is specialized solutions that help bridge the gap between space and ground. This is no small task, and we owe our success to our team who help us fulfill our mission; to match people with their legacies for betterment of the world. There is always a place at Infinity for a motivated, capable individual seeking a career to better the world. We prioritize supporting our team through exceptional benefits, work-life balance, and structured career development. At Infinity, WE ARE MORE – now, come be more with us! Job Summary: The Aerospace Engineer provides systems engineering, mission design, and technical analysis support for space technology programs at the Air Force Research Laboratory (AFRL). This role focuses on the design, development, analysis, and integration of spacecraft systems ranging from CubeSats to ESPA-class satellites, supporting cradle-to-grave space mission lifecycles from concept development through flight operations. The ideal candidate will support: • Mission and space system development: Conduct spacecraft subsystem design, mission analysis, concept of operations development, and requirements definition for experimental space missions, • Spacecraft design and analysis: Perform mechanical, thermal, structural, and systems engineering for spacecraft buses, payloads, and high-altitude balloon experiments, • Hardware development and integration: Support spacecraft hardware design, fabrication, and integration activities including technology prototyping and flight experiment assembly Key Responsibilities: Mission and Space System Development: • Support systems engineering tasks for AFRL Program Managers, Chief Engineers, and Systems Engineers on space technology programs, • Develop and refine mission requirements, concept of operations (CONOPS), mission constraints, and conceptual designs for spacecraft ranging from CubeSats to ESPA-class satellites, • Conduct mission design and evaluation including orbit analysis, launch vehicle integration studies, and mission timeline development, • Perform design tradeoffs and alternatives analysis to support technology selection and system architecture decisions, • Support refinement of programmatic objectives into actionable technical requirements and requirement flow-downs, • Perform mechanical, thermal, electrical, and structural engineering to support spacecraft and high-altitude balloon experiment designs, • Conduct spacecraft subsystem modeling, integration planning, and system-level simulations, • Design and analyze spacecraft structures, mechanisms, thermal management systems, and power systems, • Evaluate spacecraft performance through analytical methods, modeling and simulation, and engineering analysis, • Support development of Government Reference Designs (GRD) with technical input and design documentation, • Ensure all testing activities comply with industry standards, company policies, and regulatory requirements., • Support Model Based Systems Engineering (MBSE) activities including requirements definition, design, analysis, and verification/validation throughout program lifecycle, • Develop modeling capabilities to simulate, emulate, and evaluate technology options identified by AFRL, • Test and operate modeling and simulation capabilities for spacecraft systems and mission scenarios, • Perform analyses comparing model and simulation results to experimental findings and test data, • Conduct satellite system simulation and mission effectiveness evaluation Hardware Development and Technology Implementation: • Support spacecraft and high-altitude balloon flight hardware design and fabrication, • Provide hardware development, integration planning, and technology transition support, • Support design and fabrication of ground-based proofs-of-concept, experiments, and demonstrations, • Prepare documented data acquisition, processing, analysis, and modeling/simulation tools for experimental evaluations, • Support spacecraft bus, payload, and experiment assembly and integration within government facilities, • Review and provide input on test procedures, safety plans, and risk management plans, • Support launch integration activities including integration studies, interface control documents, and launch site support, • Participate in technical meetings, design reviews, program reviews, off-sites, and technical conferences, • Support procurement assistance with long lead hardware/software critical to space experiment program success, • Support technology transfer planning and decommissioning activities, including planning for technology transition to external mission partners, • Support comprehensive cybersecurity and information assurance activities including compliance with DoD risk management frameworks and security requirements Qualifications: • Education: Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, Aerospace Engineering required, • Experience: 0-10 years of experience in system integration and testing, • Clearance Requirement: Top Secret, • Minimum Skills Required:, • Strong knowledge of spacecraft systems engineering, subsystem design, and mission analysis, • Proficiency in aerospace engineering principles including orbital mechanics, spacecraft dynamics, and mission design, • Experience with mechanical, thermal, structural, and/or electrical analysis for aerospace systems, • Understanding of spacecraft subsystems including power, propulsion, attitude determination and control, communications, and structures, • Proficiency with engineering analysis tools (MATLAB, STK, Python, or similar), • Experience with CAD software for mechanical design (SolidWorks, CATIA, NX, or similar), • Knowledge of spacecraft environmental requirements and space-qualification testing, • Strong analytical and problem-solving skills with attention to detail, • Excellent written and verbal communication skills for technical documentation and collaboration, • Ability to work effectively in cross-functional teams with engineers, scientists, and program managers, • Preferred Skills:, • Experience with CubeSat, small satellite, or ESPA-class spacecraft programs, • Familiarity with Model Based Systems Engineering (MBSE) tools (CAMEO, Innoslate, or similar), • Experience with spacecraft modeling and simulation tools (STK, GMAT, or similar), • Knowledge of DoD and Air Force space systems, acquisition processes, and program management, • Familiarity with aerospace standards including:, • MIL-STD-1540D (Product Verification Requirements for Launch, Upper-Stage, and Space Vehicles), • MIL-STD-882D (System Safety), • DoD-HDBK-343 (One-Of-A-Kind Space Equipment), • Experience with thermal analysis tools (Thermal Desktop, SINDA/FLUINT), • Experience with finite element analysis (ANSYS, NASTRAN, ABAQUS), • Background in flight experiment operations or mission operations center support, • Experience with high-altitude balloon systems and near-space experiments, • Prior experience working with AFRL, DoD laboratories, or Air Force programs, • Professional engineering (PE) license or Engineer in Training (EIT) certification Work environment/Physical Requirements: • Ability to work in a lab, manufacturing, or field testing environment with occasional exposure to industrial settings., • May require lifting up to 25 pounds and working with test equipment., • Travel may be required for on-site testing, field support, or customer demonstrations. Work Schedule: This is a full-time position, typically working 40 hours per week. Overtime may be required depending on operational needs. Infinity Benefits: Great Company Culture. Infinity firmly believes that our success is due to the happiness and personal satisfaction of our employees. Health Benefits. 100% Company Paid monthly Medical and Dental premiums for you AND your family. Prepare for the Future. 401(k) company contribution, with free professional financial planning advisors Rest and Relaxation. Three weeks' Vacation – and we offer an annual company reward trip after one year of employment. Health and Wellness. We offer 48 hours of sick leave, in addition to your Vacation, as well as Flex-Spending options (Medical and Dependent Care) Work that Stays at Work. Genuine work/life balance and flexibility. We know our employees have lives outside of work and we support you in living them! Education and Professional Training Reimbursement. We support our employees career aspirations and growth through our Education Reimbursement Program! Profit Sharing Plan. Infinity’s success is due to our employees which is why all eligible employees receive an annual payout based on our Profit-Sharing Plan. U.S. Citizenship is required. EOE including disability/vet To learn more about our company and benefits, please visit: Infinity Careers

Job Description Job description: Repairs, installs and performs preventive maintenance on all production equipment to ensure that such equipment is in good operable condition at all times. Uses electrical and mechanical expertise to trouble shoot, repair, install and perform preventive and interactive maintenance on all production equipment accessories to ensure that all equipment is in good operable condition at all times • Install, operates, maintains, checks, and trouble-shoots all types of A/C and D/C electrical equipment. Install, trouble-shoot, and repair solid state and electronic equipment as well as mechanical equipment., • Uses safe working practices and reports/repairs any hazard conditions at all times., • nspects machines, takes any required test, and completed “all” reports and paperwork as required., • Perform PM and repair work in accordance with A.I.B. standards., • Diagnoses and employs proper procedure of troubleshooting to determine when parts need replacement and when repairs are necessary., • Dismantles, repairs, and re-assembles gearboxes, fans, conveyors, blowers, compressors, pump, valve, and mechanical equipment when directed., • Dismantles, repairs, and re-assembles electrical motors, relays, timers, and allied electrical equipment., • Installs and repairs electrical conduit, cables, piping, tubing, controls, and grounding as directed., • Operates mobile lift truck and hoisting in the performance of maintenance work. Possess knowledge of simple rigging when necessary for equipment moving and relocation. High School Diploma, GED or Equivalent preferred. 4 years of industrial maintenance/electrical experience required. Food/beverage processing or packaging environment preferred. KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of local, state and federal electric codes, • Certified for PLC programming e.g., Allen Bradley or equivalent preferred., • Experience installing, programming and troubleshooting the following:, • Programmable Logic Controllers (PLCs), • Variable Frequency Drives (VFDs), • All types of AC and DC electrical and mechanical equipment., • Electrical conduit, cables, piping, and tubing, including all necessary connections, controls and grounding., • Able to read and make proper installations of complex electrical circuits from wiring diagrams., • Able to disassemble, repair and reassemble gear boxes, fans conveyors, blowers, compressors, pumps, valves, furnaces, drives and all allied mechanical equipment related to electrical troubleshooting, • Experience troubleshooting and repairing oven combustion and safety devices., • Possesses working knowledge of hydraulic, compressed air systems and be able to read complex diagrams and troubleshoot these systems, • Experience Installing and repairing pneumatic conduit, cables, piping, and tubing, including all necessary connections, controls and grounding., • Possess working knowledge of the following equipment:, • MIG/TIG/ARC welding equipment., • Gas & Plasma cutting equipment, • Power tools such as drill presses, cut off saw, lathes, mills, and table tools. Gruma Corporation and its affiliates, including but not limited to Azteca Milling, L.P., are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin, ancestry, sex, gender, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, gender expression, marital status, or any other legally recognized protected basis under federal, state, or local law. The information collected by this application is solely for the purposes of determining suitability for employment, verifying your identity, and maintaining employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act as well as state and local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity with-out imposing undue hardship on Gruma. Please inform the company's personnel representative if you need assistance completing any forms or to otherwise participate in the application process. Company DescriptionAt Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips. Since 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.At Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips.\r\n\r\nSince 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.

Job Description Mechanical Engineer (Junior to Senior Level) I-Pulse Albuquerque LLC We are seeking innovative mechanical engineers with a passion for commercial pulsed power or high-temperature applications. Candidates should have a background in mechanical engineering or applied physics, with expertise in areas such as plasma physics, mining, thermal transport, or commercial applications, including theoretical and experimental analysis. Proficiency in mechanical design and materials is highly valued. Who We Are: I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications. Responsibilities Include: • Collaborating with scientists, engineers, technicians, and program managers to develop cutting-edge pulsed-power systems., • Using simulation tools (e.g., COMSOL, CST, LS-DYNA, FLASH) for FEA, thermal analysis, and 3D shock-wave simulations to predict material performance under shock waves., • Modeling hydrodynamic and solid-matter interfaces and scaling pulsed-power systems., • Designing high-temperature packaging for long-lifetime components., • Developing PCBs and advanced high-temperature, high-reliability electronic packaging., • Presenting work at design reviews, managing schedules, and tracking project costs., • Conducting theoretical and experimental analyses., • Documenting results, failures, and corrective actions., • Master’s degree in mechanical engineering or a related field (B.S. considered with sufficient experience)., • 5–10+ years of experience in pulsed-power projects, mechanical engineering, or high-temperature packaging., • 20+ years of experience in pulsed power or related projects for government or industry., • Expertise in experimental or theoretical mechanical engineering. I-Pulse Albuquerque, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. We offer competitive salaries and comprehensive benefits, including medical, dental, vision, 401(k), and PTO. Company DescriptionI-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth.\nI-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.

Job Description Overview: Diesel Mechanic – Temp-to-Hire Opportunity Ōnin Staffing is hiring for a client in the Albuquerque, NM area for a Diesel Mechanic position at a recycling plant. This is a temp-to-hire opportunity for a dependable, skilled mechanic who takes pride in keeping equipment running safely and efficiently. Pay: DOE Location: Albuquerque, NM Schedule: Full-time Position Type: Temp-to-hire Job Responsibilities • Inspect, diagnose, repair, and maintain diesel engines and heavy equipment, • Perform preventative maintenance on trucks, loaders, forklifts, balers, compactors, and other plant equipment, • Troubleshoot mechanical, hydraulic, electrical, and engine issues, • Complete oil changes, filter replacements, brake repairs, belt/hose replacements, and general service work, • Keep accurate records of repairs, maintenance, and parts used, • Ensure all equipment is operating safely and efficiently, • Follow all company safety procedures and plant guidelines, • Maintain a clean and organized work area, • Previous diesel mechanic or heavy equipment mechanic experience preferred, • Knowledge of diesel engines, hydraulics, electrical systems, and preventative maintenance, • Ability to diagnose and repair mechanical issues, • Must have your own basic tools preferred, • Ability to lift, bend, stand, climb, and work in a plant environment, • Strong attention to detail and commitment to safety, • Reliable transportation and strong attendance, • Must be dependable, hardworking, and able to work independently Why Work With Ōnin Staffing?, • Temp-to-hire opportunity, • Weekly pay, • Opportunity for long-term employment, • Supportive staffing team, • Benefits available through Ōnin Staffing Apply today with Ōnin Staffing for this Diesel Mechanic opportunity in Albuquerque! Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team Company DescriptionDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like: Weekly Pay $5 Prescription Drugs $5 Doctor's Visit Copays Free Teledoctor Service Free Counseling Services Life Insurance Included Vision Insurance Included Dental Insurance Included Vacation and Holiday Pay Scholarship Opportunities NEW! 401(k) Retirement Plan Free Legal Services Our unbeatable employee discount program If this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you! –Your Ōnin teamDon't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. Plus, every Ōnin job comes with our amazing Teammate Benefits program, designed to give you the tools you need to protect your health, your money and the people and things you care about. Tools like:\r\n\r\nWeekly Pay\r\n$5 Prescription Drugs\r\n$5 Doctor's Visit Copays\r\nFree Teledoctor Service\r\nFree Counseling Services\r\nLife Insurance Included\r\nVision Insurance Included\r\nDental Insurance Included\r\nVacation and Holiday Pay\r\nScholarship Opportunities\r\nNEW! 401(k) Retirement Plan\r\nFree Legal Services\r\nOur unbeatable employee discount program\r\nIf this sounds like something you would be interested in, Apply Now so we can hold a spot for you until we can schedule an interview. We can’t wait to talk to you!\r\n\r\n–Your Ōnin team

Job Description Test Technician Job Description We are seeking a skilled Test Technician with a strong background in electronics and mechanics. The ideal candidate will possess a certification or diploma as an electronic technician or have equivalent practical experience. A minimum of two years of experience in a troubleshooting role is essential. You will have thorough knowledge of test equipment, troubleshooting processes, manufacturing documentation, and schematics. Strong communication skills and the ability to interact with other support groups are necessary, along with good computer skills and a positive attitude. Please note that color identification is a requirement for this role. Responsibilities • Utilize a strong background in electronics and mechanics to effectively perform testing and troubleshooting tasks., • Employ various test equipment such as DMM, Oscilloscope, Function Generator, Spectrum Analyzer, Signal Generators, and Vector Network Analyzer., • Analyze and interpret manufacturing documentation and schematics to assist in troubleshooting processes., • Communicate effectively with other support groups to provide technical responses and solutions., • Demonstrate good computer skills in executing assigned tasks and maintaining records., • Maintain a positive attitude and collaborate effectively as a team player., • Strong background in electronics and mechanics., • Certification or diploma as an electronic technician or equivalent practical experience., • Minimum of two years of experience in a troubleshooting role., • Thorough knowledge of test equipment and troubleshooting processes., • Strong communication and interpersonal skills., • Good computer skills., • Experience with PCB, circuit board, and soldering., • Familiarity with test procedures and electrical schematics. This position offers a long-term opportunity in a growing company with the potential to be hired on permanently. You will be part of an expanding team that values growth and development. Work Environment The working environment is generally clean, although there may be occasional exposure to dust. Safety clothing and gear are required in safety-sensitive areas, while business/office casual attire is appropriate elsewhere. Job Type & Location This is a Contract position based out of Albuquerque, NM. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description American Emergency Products (AEP) is seeking a driven, detail-oriented Territory Sales Consultant to support continued growth across our assigned markets. This is a consultative, project-based sales role focused on public safety and municipal fleet customers. The Territory Sales Consultant is responsible for managing the full sales lifecycle—from initial customer engagement and needs assessment through quoting, order execution, and final vehicle delivery. Key Responsibilities Sales & Business Development • Develop and maintain relationships with law enforcement, fire, and municipal fleet customers, • Identify and pursue new business opportunities within the assigned territory, • Manage a long-cycle sales pipeline including prospecting, quoting, and closing, • Conduct detailed needs assessments to understand agency requirements and operational standards, • Develop customized vehicle build solutions including equipment packages and system integrations, • Own projects from quote through delivery, ensuring a seamless customer experience, • Develop detailed build documentation to support production teams, • Lead pre-build and post-build meetings with customers and internal stakeholders, • Serve as the primary point of contact throughout the lifecycle of each project, • Provide proactive communication, follow-up, and issue resolution, • Maintain accurate pipeline activity, forecasting, and updates in CRM (HubSpot), • Ensure all opportunities are properly documented with close dates, deal stages, and probabilities, • Assist with vehicle intake coordination and shop scheduling as needed, • Collaborate cross-functionally with sales, production, and leadership teams Qualifications • 2+ years of experience in sales, account management, or customer-facing roles, • Strong communication, organization, and time management skills, • Ability to manage multiple projects and deadlines in a fast-paced environment, • Experience with CRM platforms (HubSpot preferred), • Proficient in Microsoft Office (Excel, Outlook, Word), • Experience in automotive, fleet, or upfitting industries, • Familiarity with public safety or municipal procurement processes, • Technical aptitude or ability to learn vehicle systems and integrations Compensation & Benefits • Base Salary: $75,000 annually, • Commission: 3% of gross profit on individual sales, with no cap on earnings based on performance, • On-Target Earnings (OTE): Approximately $109,200, based on a $75,000 base salary and earned commissions based on ~$3M in annual sales at standard gross profit margins. Achievement of this level requires successful territory development., • Company Vehicle provided for territory travel, • Comprehensive benefits package including:, • Medical, dental, and vision insurance, • Paid time off: (Accrual) Year 1: 10 Days, Year 5: 15 days, Year 15: 20 days, • Paid Holidays: 8 days per year, • Retirement plan: 401K with 3% company matchCompany DescriptionAmerican Emergency Products (AEP) is a leading provider of turnkey emergency vehicle upfitting solutions, serving law enforcement, fire, and municipal agencies across the United States. With multiple locations throughout the Southwest, AEP specializes in designing and building fully integrated public safety vehicles, including lighting, siren systems, electrical infrastructure, prisoner transport, and mission-specific equipment. AEP works closely with top-tier manufacturers and leverages in-house expertise to deliver consistent, high-quality builds that meet the operational demands of modern public safety agencies. Our focus is simple: Build it right. Build it consistently. Support it long-term.American Emergency Products (AEP) is a leading provider of turnkey emergency vehicle upfitting solutions, serving law enforcement, fire, and municipal agencies across the United States.\r\n\r\nWith multiple locations throughout the Southwest, AEP specializes in designing and building fully integrated public safety vehicles, including lighting, siren systems, electrical infrastructure, prisoner transport, and mission-specific equipment.\r\n\r\nAEP works closely with top-tier manufacturers and leverages in-house expertise to deliver consistent, high-quality builds that meet the operational demands of modern public safety agencies.\r\n\r\nOur focus is simple:\r\nBuild it right. Build it consistently. Support it long-term.

Job Description APPLICATION DEADLINE: COB May 20th, 2026 JOB DESCRIPTION McDade-Woodcock, Inc. wants to expand our team by hiring a full time Electrical Estimator. The overall duties of an Electrical Estimator are to estimate the cost of potential projects, which may include making site visits, and providing cost breakdowns and scope letters to include with the bids. We are seeking highly motivated individuals who are looking for a company where they can learn, share, and grow with some of the industry’s leading professionals. Interested candidates should submit their resume with a one-page cover letter addressing why they feel like they would be a good candidate for the position. RESPONSIBILITIES • Attend Pre-Bid Site Walk-Throughs (Pictures/Documentation), • Take Off Materials/Equipment, • Work with potential subcontractors and vendors, • Write detailed Scope Letters outlining Scope of Work, Inclusions/Exclusions, and associated contract documents (Drawings/Specifications), • Upload/Submit Requests for Proposals/Qualifications (RFP/RFQ), • Report regularly to management/attend required coordination meetings KEY SKILLS & ABILITIES • The ability to be trained in the use of estimating software, • Ability to meet hard deadlines, • Knowledge of the N.E.C. and all relevant local codes, • Ability to read and understand civil, architectural, structural, mechanical, and electrical plans and specifications and other documents as they relate to electrical work, • Computer literate and proficient with Microsoft Office applications, specifically Excel COMPENSATION & BENEFITS • Starting Rate of $40.00-$55.00/hour depending on experience, • Medical/Dental/Life Insurance, • Optional Vision Insurance, • 401K Profit Sharing Plan, • Vacation/Sick/Holiday Time ADDITIONAL EXPECTATIONS • Position will be subject to pre-employment screening, which will include background check, DMV check, and drug testing, • Regular and predictable attendance, • Essential functions of this position are to be performed in a Company-designated office or field location, • Compliance with all local, state, and federal laws COMPANY INFORMATION McDade-Woodcock, Inc. is a commercial/industrial electrical, instrumentation and control contractor focusing on industrial and municipal projects throughout the southwest. We specialize in water, wastewater, healthcare, educational, government, and military facilities. Other areas of experience include high-tech facilities, clean rooms, data centers, renewable energy, movie studios, mining, hydroelectric, airport runways and hangers, substations, greenhouses, arenas and sport fields. Electrical power distribution (including low and medium voltage), electrical equipment, and cabling are among our primary focuses as an electrical contractor. These services include voltages ranging from: 120 volts through 35kV, power generation and paralleling, underground infrastructure and duct bank systems. We provide installation of electrical equipment such as motor control centers, variable frequency drives, uninterruptible power supplies, surge protective devices, automatic transfer switches, step-down transformers, main distribution panelboards and subpanels. Additionally, we provide and install lightning protection, alternative energy systems, fire alarm, telecommunication/tele-data systems, site lighting, SCADA systems, fiber optics, CCTV and security systems. Company DescriptionMcDade-Woodcock, Inc. is a commercial/industrial electrical, instrumentation and control contractor focusing on industrial and municipal projects throughout the southwest. We specialize in water, wastewater, healthcare, educational, government, and military facilities. Other areas of experience include high-tech facilities, clean rooms, data centers, renewable energy, movie studios, mining, hydroelectric, airport runways and hangers, substations, greenhouses, arenas and sport fields. Electrical power distribution (including low and medium voltage), electrical equipment, and cabling are among our primary focuses as an electrical contractor. These services include voltages ranging from: 120 volts through 35kV, power generation and paralleling, underground infrastructure and duct bank systems. We provide installation of electrical equipment such as motor control centers, variable frequency drives, uninterruptible power supplies, surge protective devices, automatic transfer switches, step-down transformers,McDade-Woodcock, Inc. is a commercial/industrial electrical, instrumentation and control contractor focusing on industrial and municipal projects throughout the southwest. We specialize in water, wastewater, healthcare, educational, government, and military facilities. Other areas of experience include high-tech facilities, clean rooms, data centers, renewable energy, movie studios, mining, hydroelectric, airport runways and hangers, substations, greenhouses, arenas and sport fields. \r\n\r\nElectrical power distribution (including low and medium voltage), electrical equipment, and cabling are among our primary focuses as an electrical contractor. These services include voltages ranging from: 120 volts through 35kV, power generation and paralleling, underground infrastructure and duct bank systems. We provide installation of electrical equipment such as motor control centers, variable frequency drives, uninterruptible power supplies, surge protective devices, automatic transfer switches, step-down transformers,

Job DescriptionElectrical Division Manager Commercial Electrical Construction Albuquerque, New Mexico Exempt | $130,000-$140,000 Base + Bonus LHH is partnering with a well-established and growing commercial electrical contractor in New Mexico to identify an experienced Electrical Division Manager. This is a senior leadership opportunity for a proven professional ready to lead a commercial electrical division and play a key role in the continued growth and success of the organization. Position Overview The Electrical Division Manager is responsible for leading all aspects of the commercial electrical division, including estimating, project management, field operations, safety, and overall construction execution. This role oversees the successful delivery of projects while ensuring safety, quality, profitability, and client satisfaction. This is a highly visible, forward-facing leadership role with expectations to represent the organization professionally within the industry and local community. Key Responsibilities Division Leadership and Strategy Lead and manage the commercial electrical division, including estimating, project execution, and field operations Partner with the estimating team to pursue, secure, and manage projects within the division Provide strategic leadership to support growth, profitability, and operational excellence Project and Operational Oversight Ensure projects are delivered safely, on time, within budget, and in compliance with contract requirements Oversee project management teams and field leadership to maintain consistent execution standards Monitor project performance, financial outcomes, and operational metrics Client and Industry Engagement Serve as a senior representative of the organization with clients, partners, and industry stakeholders Build and maintain strong relationships to support repeat business and long-term growth Deliver a high level of customer service and responsiveness Team Leadership and Development Lead, mentor, and support project managers, estimators, and field leadership Promote a positive, accountable, and safety-focused culture Encourage collaboration, professional development, and continuous improvement Qualifications Minimum of 10 years of experience in the commercial electrical industry Licensed Journeyman Electrician required (New Mexico) Electrical Contractor's License preferred Strong understanding of commercial electrical contracting operations Demonstrated business acumen and leadership capability Proven ability to build relationships and lead teams effectively Compensation and Benefits Competitive base salary of $130,000-$140,000 Performance bonus opportunities 401(k) Health, dental, and vision insurance Paid time off Relocation assistance available Why This Opportunity This role offers the chance to step into a senior leadership position with a respected contractor that values expertise, integrity, and long-term growth. The organization provides stability, strong project volume, and the opportunity to make a meaningful impact. Pay Details: $130,000.00 to $140,000.00 per year Search managed by: Aryela Harris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Raven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements deployable sensors, and cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs. Raven Defense is searching for an experienced Electrical Engineer to serve as the technical focal point for our electrical design, modeling, assembly, and troubleshooting operations in Albuquerque, NM. The ideal candidate will seamlessly bridge the gap between complex customer requirements and mission-ready hardware, working in a collaborative, cross-functional environment where your designs move rapidly from the screen to the field. Key Responsibilities: • System Design & Analysis: Lead electrical loads analysis, complex harness design, and selection and integration of COTS equipment, • Hardware Development: Drive the design and prototyping of printed circuit boards (PCBs) for telemetry, RF, or mixed-signal applications., • Hands-on Integration: Perform system wiring, troubleshooting, and field-level repairs of mission-critical equipment., • Bachelor of Science Degree in Electrical Engineering Technology, Electrical Engineering, or a related field, • 3+ years of experience developing electrical schematics, harness drawings, and performing hands-on system integration, • Proven ability to maintain technical excellence in a high-tempo environment with shifting priorities and mission-critical deadlines, • 5+ years’ experience in defense/aerospace electrical integration, • Working knowledge of at least one discipline of; circuit card design, RF, mixed signal design, or defense industry electrical engineering standards, • Experience in airborne or maritime electrical system integration activities, • Thorough understanding of the whole design lifecycle and ability to work outside core function, • Occasional travel, up to 25%, is required for this position. Travel will include customer and vendor visits in office/meeting environments as well as engineering support requirements which may include CONUS and OCONUS deployment aboard specialized RDT&E assets in support of customer requirements., • US Citizenship is required for this position Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift Raven Defense Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training Company DescriptionRaven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.Raven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.

Job Description Position Title: Residential Service Technician Reports to: Residential HVAC Manager Pay Classification: Non-Exempt Pay Type: Hourly Summary An HVAC Technician, or a Heating, Ventilation and Air Conditioning Technician, installs and repairs various air quality systems. An HVAC Technician is a maintenance professional responsible for repairing HVAC and other air quality systems for various homes. They’re typically responsible for keeping this equipment clean, fixed and maintained for customers. HVAC Technicians work to locate any dangerous features on an HVAC system that could be harmful to the users’ health. Duties and Responsibilities Their main duties include locating and diagnosing problems on equipment, conducting warranty services, and quickly performing emergency repairs on certain equipment items. HVAC Technicians have several responsibilities. Depending on the specifics of a job, their primary duty is to either maintain systems or install new units. In fact, most HVAC Technicians spend much of their time alternating between these two roles. Other common responsibilities for HVAC Technicians include: • Respond to emergency calls promptly and providing routine maintenance to help repair the HVAC system quickly for customers., • Removing old systems, • Installing new systems with minimal supervision, • Performing routine maintenance, • Training junior team members, • Communicating with clients and customers, • Ordering and maintaining equipment, • Meeting local HVAC code, • Reading and Interpreting wiring diagrams, • Understanding refrigeration cycles, • Knowing how to interpret various technical data, such as pressure and temperatures, • State licensure and relevant certification, • One to Four Years’ experience, • Valid Driver’s License The relentless pursuit and commitment to excellence, for our Albuquerque Plumbing Family, our Customers, and our Industry. Company DescriptionAlbuquerque Plumbing is a Well-established but motivated residential and commercial skilled trade services company. We do not believe in the EMPLOYEE word; here we are, all team members, celebrated for our common positive attitudes, commitment to helping our team members, and talents and skills. We are a company that knows all its people and sees them not as a part of our success but as the reason for and the measurement of our success. Our team is 98 strong and constantly growing. We currently provide Plumbing, HVAC, Electrical, Medium and low temp refrigeration, and kitchen equipment repair and replacement services for residential and commercial customers. Our Revenue forecast goals for 2024 are shy of 20 million with a great chance of success. Albuquerque Plumbing has grown from an idea to a market leader in 16 short years, with many years of growth and success ahead of us.Albuquerque Plumbing is a Well-established but motivated residential and commercial skilled trade services company. We do not believe in the EMPLOYEE word; here we are, all team members, celebrated for our common positive attitudes, commitment to helping our team members, and talents and skills. We are a company that knows all its people and sees them not as a part of our success but as the reason for and the measurement of our success. Our team is 98 strong and constantly growing. We currently provide Plumbing, HVAC, Electrical, Medium and low temp refrigeration, and kitchen equipment repair and replacement services for residential and commercial customers. Our Revenue forecast goals for 2024 are shy of 20 million with a great chance of success. Albuquerque Plumbing has grown from an idea to a market leader in 16 short years, with many years of growth and success ahead of us.

Job Description APPLICATION DEADLINE: COB June 4th, 2026. Position starts on or after June 22nd, 2026. JOB DESCRIPTION McDade-Woodcock, Inc. is seeking an experienced Controller to lead our accounting team at our corporate office in Albuquerque, New Mexico. They would be overseeing all accounting and financial operations for our New Mexico and Colorado operations. The ideal candidate will have strong construction industry accounting experience, proven leadership ability, and a bachelor’s degree in accounting or related field. This position will assume management of the accounting department from the current Controller and ensure a smooth transition of responsibilities. RESPONSIBILITIES • Manage daily operations of the Accounting Department, • Prepare quarterly and annual financial statements, • Oversee year-end closeout and accounting adjustments, • Ensure compliance with federal, state, and local tax requirements, licensing, and regulatory filings, • Coordinate annual audits, reviews, and relationships with external CPAs, auditors, and financial institutions, • Monitor company cash flow and ensure project billings align with projected costs and financial goals, • Supervise, mentor, and develop accounting staff, • Oversee and optimize use of Sage 100 Contractor accounting software, • Manage transition of duties from existing Controller and maintain continuity of operations, • Support ownership and executive management with financial reporting and analysis KEY SKILLS & ABILITIES • Strong leadership and team management skills, • Advanced knowledge of accounting principles, financial reporting, and internal controls, • Strong understanding of budgeting, forecasting, and cash flow management, • Ability to oversee multi-state operations, • High ethical standards and discretion with confidential information, • Strong computer skills, including Microsoft Office 365 with advanced Excel proficiency, • Strong communication and problem-solving skills QUALIFICATIONS • Bachelor’s Degree in Accounting or related field preferred, • 5+ years of experience in a Controller, Accounting Manager, or similar leadership role, • Construction industry accounting experience preferred, • Sage 100 Contractor experience preferred COMPENSATION & BENEFITS • Starting salary 95K-115K, • Medical/Dental/Life Insurance, • Optional Vision Insurance, • 401K Profit Sharing Plan, • Vacation/Sick/Holiday Time ADDITIONAL EXPECTATIONS • The position will be subject to pre-employment screening, which will include background check and drug testing, • Regular and predictable attendance, • Essential functions of this position are to be performed in a Company-designated office or field location, • Compliance with all local, state, and federal laws, • Protecting sensitive and confidential information from unauthorized disclosure or use COMPANY INFORMATION McDade-Woodcock, Inc. is a commercial/industrial electrical, instrumentation and control contractor focusing on industrial and municipal projects throughout the southwest. We specialize in water, wastewater, healthcare, educational, government, and military facilities. Other areas of experience include high-tech facilities, clean rooms, data centers, renewable energy, movie studios, mining, hydroelectric, airport runways and hangers, substations, greenhouses, arenas and sport fields. Electrical power distribution (including low and medium voltage), electrical equipment, and cabling are among our primary focuses as an electrical contractor. These services include voltages ranging from: 120 volts through 35kV, power generation and paralleling, underground infrastructure and duct bank systems. We provide installation of electrical equipment such as motor control centers, variable frequency drives, uninterruptible power supplies, surge protective devices, automatic transfer switches, step-down transformers, main distribution panelboards and subpanels. Additionally, we provide and install lightning protection, alternative energy systems, fire alarm, telecommunication/tele-data systems, site lighting, SCADA systems, fiber optics, CCTV and security systems. Company DescriptionMcDade-Woodcock, Inc. is a commercial/industrial electrical, instrumentation and control contractor focusing on industrial and municipal projects throughout the southwest. We specialize in water, wastewater, healthcare, educational, government, and military facilities. Other areas of experience include high-tech facilities, clean rooms, data centers, renewable energy, movie studios, mining, hydroelectric, airport runways and hangers, substations, greenhouses, arenas and sport fields. Electrical power distribution (including low and medium voltage), electrical equipment, and cabling are among our primary focuses as an electrical contractor. These services include voltages ranging from: 120 volts through 35kV, power generation and paralleling, underground infrastructure and duct bank systems. We provide installation of electrical equipment such as motor control centers, variable frequency drives, uninterruptible power supplies, surge protective devices, automatic transfer switches, step-down transformers,McDade-Woodcock, Inc. is a commercial/industrial electrical, instrumentation and control contractor focusing on industrial and municipal projects throughout the southwest. We specialize in water, wastewater, healthcare, educational, government, and military facilities. Other areas of experience include high-tech facilities, clean rooms, data centers, renewable energy, movie studios, mining, hydroelectric, airport runways and hangers, substations, greenhouses, arenas and sport fields. \r\n\r\nElectrical power distribution (including low and medium voltage), electrical equipment, and cabling are among our primary focuses as an electrical contractor. These services include voltages ranging from: 120 volts through 35kV, power generation and paralleling, underground infrastructure and duct bank systems. We provide installation of electrical equipment such as motor control centers, variable frequency drives, uninterruptible power supplies, surge protective devices, automatic transfer switches, step-down transformers,

Job Description Immediate Temp-to-Hire Position Software/Systems Engineer Job Description Join a dynamic small company where you'll gain comprehensive systems engineering experience from concept through development! Primary Qualifications: • Strong work ethic - We value dedication, reliability, and commitment to excellence, • Eagerness to learn - We're looking for engineers who thrive on continuous learning and professional growth, • Team collaboration - Ability to work effectively in our close-knit, collaborative environment Why Work for Our Small Company: • Comprehensive exposure - Work on all aspects of system design from initial concept through final development, • Systems engineering experience - Gain broad knowledge across multiple engineering disciplines, • Direct impact - Your contributions will have immediate, visible impact on projects and company success, • Mentorship opportunities - Learn directly from senior engineers and leadership, • Diverse project involvement - Exposure to aviation trainers, training components, gun active recoil devices, and dynamic motion seats, • Cross-functional collaboration - Work closely with mechanical, electrical, and systems engineers Skills and Abilities: • Good understanding of computer science, engineering, and mathematical analysis principles, • Physics and/or aerodynamics background is desirable but not required - we will provide training, • Ability to lead and direct design work of others, • Ability to partner with mechanical, electrical, and systems engineers to define design solutions, • Mentoring capabilities for other engineers, • Software development knowledge (training provided for gaps):, • C, C++, Linux, Windows, Microsoft Development Suite, Python, .NET, • Real-time, Embedded Systems, Object Oriented Design, Agile Methodologies Professional Behaviors We Value: • Punctuality and preparation, • Team collaboration and communication, • Meeting schedules and budgets, • Good planning and problem-solving practices, • Adaptability and continuous improvement mindset Education and Experience: Bachelor of Science (B.S.) in Computer Engineering/Software Engineering preferred • 5 - 7 years of experience desired, but we prioritize attitude and work ethic over exact experience match, • Equivalent experience and demonstrated learning ability will be considered Responsibilities: • Interface with electrical and mechanical engineering staff on new and existing designs, • Participate in design reviews with engineering and management, • Research, design, develop, and test systems-level software, compilers, and network distribution software, • Develop understanding of electro-mechanical controls and/or robotics (training provided), • Apply company configuration management procedures and processes, • Participate in configuration control board meetings as required, • Grow into a complete systems engineer through exposure to the full product development lifecycle What You'll Gain: • End-to-end systems experience - From concept sketches to deployed solutions, • Multi-disciplinary knowledge - Understanding of mechanical, electrical, and software integration, • Leadership development - Opportunities to mentor and lead as you grow, • Industry expertise - Deep knowledge of aviation training systems and advanced control systems Other duties as assigned Anticipated pay rate: $80+/- per hour - $165k +/- per annum) DOE We believe that the right attitude, strong work ethic, and willingness to learn are more valuable than checking every technical box. If you're passionate about engineering and ready to grow with a company that invests in its people, we want to hear from you. Company DescriptionBESTstaff is a New Mexico Small Business that has been providing quality staff augmentation for 16 years. The Albuquerque Journal through their Reader’s Choice Award Program has names BESTstaff as a top staffing firm for the last 8 consecutive years.BESTstaff is a New Mexico Small Business that has been providing quality staff augmentation for 16 years. The Albuquerque Journal through their Reader’s Choice Award Program has names BESTstaff as a top staffing firm for the last 8 consecutive years.

Job Description The DCS Air & Space Technology (AST) Sector is seeking a Modeling and Simulation Software Engineer to support extensive high visibility Modeling, Simulation, and Analysis (MS&A) efforts. Are you interested in working in a high-tech company on cutting edge technology to help solve national security problems? Do you want to be challenged every day supporting world class research and development? If so, DCS may be the place for you! DCS is an employee-owned organization known for creating agile technology solutions across the U.S. Defense, Aerospace, Human Factors, and Security markets. As a member of our team, you will support defense technologies along with research and development in Albuquerque, NM, having opportunities to work in a dynamic environment, with state-of-the-art simulation technologies, simulation integration experts, and experienced military Subject Matter Experts (SMEs). Our work focuses on conducting capability assessments for emerging military technologies and ensuring related tools and methodologies are suitable to inform Department of Defense (DoD) decision makers. Essential Job Functions: As this Modeling and Simulation Software Engineer, you could expect to: Collaborate with agile software development teams to design, develop, test, and deploy MS&A solutions. Collaborate with SMEs, such as modelers, analysts, and technologists, to identify requirements for system implementation in the Advanced Framework for Simulation, Integration, and Modeling (AFSIM) and other M&SA tools. Conduct software component and system integration testing to ensure compliance with specifications. Apply software best practices (version control, documentation, etc.) for all developed and modified software. Construct military behavior models and entities of varying complexity in AFSIM. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. At least a BS degree in Computer Science, Aerospace, Electrical, or Mechanical Engineering, and 2 years of related experience. Applicants selected will be subject to a U.S. Government background investigation and must meet eligibility requirements for access to classified information. Must have an active Top-Secret level U.S. DoD security clearance. Experience developing object-oriented software in C/C++ with Visual Studio integrated development environment. Experience creating AFSIM software and tools, including source code and plugin development. Excellent written and verbal English communications skills. Ability to work well in team environments. Ability to travel, as required. Desired Skills: Familiarity with modern military systems, both foreign and domestic. MS in Computer Science, Aerospace, Electrical, or Mechanical Engineering. Experience with any of the following: Linux, CMake, Python, or Git. Familiarity with C#.

Yellowstone Local is proud to represent Magic Mechanical, LLC, an industry leader in commercial and light industrial HVAC services. If you're an HVAC technician who takes pride in solving problems, working independently, and delivering high-quality service, this is the opportunity to build a long-term career with a company that values your expertise. What’s in it for You? * Pay range of $25 to $35 per hour based on experience, technical skills, and qualifications * Performance-based bonus opportunities tied to service and production goals * Company vehicle and gas card provided for daily routes * Take-home vehicle available after ramp period * Dispatch from home after introductory period * Company-issued technology for dispatching, diagnostics, and job documentation * Health and dental insurance options * Consistent, year-round work in the Albuquerque area * Opportunity to work on commercial and light industrial HVAC systems Why You’ll Love It Here * Quality-focused work environment with autonomy in the field * Supportive team culture that values professionalism and growth * Leadership committed to long-term success and employee development * Opportunity to expand your commercial HVAC troubleshooting and diagnostic experience * Trusted to manage your work and deliver solutions without unnecessary oversight Your New Role * Perform HVAC service, diagnostics, troubleshooting, and repairs on commercial and light industrial systems throughout Albuquerque, NM * Complete preventive maintenance and equipment inspections * Diagnose and repair components including motors, controls, sensors, and electrical systems * Measure refrigerant levels, airflow, and overall system performance * Communicate findings and repair recommendations clearly with customers and site contacts * Document service details, repairs performed, and equipment conditions accurately * Maintain organized service routes and deliver professional customer service on every call Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. * Minimum 1 to 2 years of commercial HVAC service experience * Experience working with light industrial HVAC systems is a plus * EPA Certification preferred but not required * Strong HVAC troubleshooting and diagnostic skills * Ability to work independently and manage a service schedule efficiently * Dependable, organized, and focused on quality workmanship * Valid driver’s license Magic Mechanical, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

Job Description HVAC Install Technician Job Description Position Title: Residential Install Technician Reports to: Residential HVAC Install Manager Pay Classification: Non-Exempt Pay Type: Hourly Summary An HVAC Installers tasks include installing, maintenance, repairs, and service to heating, ventilation, air conditioning, and refrigeration systems that control the air quality and temperature in buildings. HVAC Installers provide service and support for industrial, commercial, and residential HVAC systems. HVAC Installer services equipment on one job site or service various sites throughout the day. A large part of an HVAC Installers work often involves designing, fabricating, and installing a wide range of duct fittings and ducts required and wiring both indoor and outdoor units. Duties and Responsibilities As an HVAC Installer, you will travel to our clients properties, inspect their current equipment, find defects in their devise, and perform the required repairs or maintenance routines. The HVAC Installer must be skilled in cleaning, adjusting, and repairing systems. You will inspect and ensure that new systems work efficiently. • Inspect the effectiveness and safety of current customers HVAC system, • Installing, maintaining, and repairing customers ventilation, air conditioning systems, and equipment up to current codes, • Diagnosing HVAC systems for electrical and mechanical defects., • Cleaning, adjusting, and repairing systems, and performing warranty services, • Maintaining a detailed inventory of all HVAC equipment and resources., • Ensuring compliance with appliance standards and with Occupational Health and Safety Act, • Participate in all technical training, • Valid Drivers License, • Must be insurable, • EPA Certificate preferred, • State licensure and relevant certification, • Punctual, reliable and must have strong communication skill, • Able to get along with people, • Strong verbal and oral communication skills, • Attention to detail, prioritization skill, and time management, • Motivational and communication skill, • Knowledgeable and problem-solving skill, • Able to follow instructions, • Physically fit and manual dexterity, • Familiar handling all tools and equipment needed for HVAC installation and maintenance, • Ability to work after hours, over weekends, and on public holidays with short or no notice. OUR TEAM MISSION The relentless pursuit and commitment to excellence, for our Albuquerque Plumbing Family, our Customers, and our Industry.

Job DescriptionDescription: What We’re Looking For MHQ West (a division of Chalmers Ford) is looking for experienced Graphics Installation Technicians to join our team. If you are tired of where you work and want to work in a clean and safe environment, come and see what we have to offer. We are looking for certified technicians to join our team. We provide an excellent working environment and temperature-controlled shop. About Us At MHQ West and Chalmers Ford, we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Every employee at MHQ West and Chalmers Ford is absolutely critical to its success. Our promise is to keep delivering the same award winning service and value that our community has come to expect from our companies through the years. What We Offer 401(k) Paid holidays Paid Time Off Health, Dental and Vision insurance Basic Life insurance Shop equipped with the newest technology and equipment Uniforms provided Discounted vehicle purchases Highly productive shop Career advancement opportunities, promote from within Great learning environment for technicians looking to grow their career ASE and state inspection certification reimbursement and all training expenses paid to further your career, including GM School Continued education, manufacturer hands-on and web-based training Clean and professional work environment Relocation assistance available for qualified candidates Paid transportation of tools box Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs Executing repairs under warranty to manufacturer specifications Requirements: Qualifications Must pass a background check and drug screen Must have a current, valid New Mexico Driver's License Must hold a high school diploma or equivalent Graphics Installation experience required A level qualifications, including Diagnostic, Electrical and Engine Repair Excellent customer service skills Basic computer skills Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment Positive, friendly attitude, along with a customer service mentality Enjoy working in a fast paced environment Team player

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other The Technician II is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician II is a vital member of the Easy Ice service team, responsible for ensuring the optimal performance and reliability of ice machines through proficient installation, cleaning, maintenance, and troubleshooting. The ideal Technician II is results-oriented, driven by a passion for delivering exceptional customer service, and possesses a strong work ethic that inspires collaboration and excellence among colleagues. The Technician II will focus on maximizing equipment lifespan, minimizing service calls and emergency ice purchases, and ultimately enhancing customer satisfaction and loyalty. Key responsibilities include providing outstanding service and support during on-site visits, forging positive relationships with customers, managing installation and repair tasks, accurately diagnosing and resolving technical issues, training and support of less experienced technicians, and completing detailed service reports to improve future service quality. The Technician II will also maintain proper truck stock and supplies during field operations, maintain company vehicles in accordance with established policies, and uphold the Easy Ice brand image with professionalism and positive engagement. The successful candidate will embody a flexible, self-motivated approach to work, thrive in a fast-paced environment, and be dedicated to fostering a strong team dynamic while contributing to overall business growth and success. A successful Technician II will drive the following outcomes: • Deliver exceptional service that fosters positive relationships with customers, ensuring they are consistently satisfied with both the quality of service and the performance of their ice machines, • Perform thorough installation, repair, maintenance, cleaning, and troubleshooting of ice machines to improve their performance and longevity, thereby reducing the frequency of service calls and emergency ice purchases, • The Tech II may be required to lead the installation process, driving excellence by exceeding customer expectations with accurate, timely, and efficient installation of ice machine equipment, • Accurately diagnose and resolve technical issues on the first visit, minimizing downtime for customers and enhancing their overall experience, • The Technician II is a progression from Technician I. All levels of Technician - I, II, and III, are responsible for the installation, cleaning, preventative maintenance, trouble shooting, and repair of ice machine equipment as required. This may include bagging/delivering ice, or other duties as assigned., • Install, clean, maintain, troubleshoot and install Easy Ice equipment, with the goal to increase equipment life and reliability, reduce service calls, and reduce emergency ice purchases, • Provide service and customer support during field visits with a strong emphasis on building positive relationships with customers, • Train and mentor less senior technicians as required, • Manage on-site installation, repair, maintenance and test tasks, • Diagnose errors or technical problems and determine proper solutions, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards Experience: • 1+ year experience in the diagnosis and repair of commercial equipment (prior experience with refrigeration, electrical, HVAC, ice machines, or related equipment), • EPA 2 Certification, • Working knowledge of mobile tools and applications, • Experience in and the ability to demonstrate volt meter operations, • Ability to work a full-time schedule which includes a rotating on-call schedule, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing repair and maintenance issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • EPA 2 Certification Additional Required Attributes:, • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • Strong work ethic and dedication to new technologies and service protocols in the field of ice machine repair and maintenanceWork Environment and Physical Demands:, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job Description HVAC Technician-Up to a $2,500 Sign-On Bonus! Location: Albuquerque, NM Schedule: Monday-Friday + rotating weekends. Pay: Multiple pay plans, hourly, piece rate, commission+ bonuses About Us: Since 1929, Wagner Mechanical has been dedicated to providing trusted HVAC, plumbing, and electrical home repairs. With nearly a century of experience, our team takes pride in delivering reliable service, quality workmanship, and lasting comfort for every home we serve. Why join our team? • Work-Life Balance: Leave the on-call hours behind—be home for dinner every night!, • Weekly Paycheck, • Company-Provided Vehicle & Fuel Card, • Free Uniforms, • 401(k) Match & Health Benefits (Medical, Dental, Vision), • Short & Long-Term Disability + Life Insurance, • Paid Time Off (PTO), • Communicate clearly with dispatch, your manager, and parts and installation teams, • Maintain a clean and organized company truck—inside and out, • Keep truck inventory up to date and accurate, • Complete all required paperwork and documentation properly and on time, • Participate in the on-call rotation, • Maintain a clean, professional appearance, • Participate in ongoing training and certification development (we can help you obtain necessary credentials), • Follow all safety regulations and best practices, • 1+ year of residential HVAC service or installation experience, • High School Diploma or equivalent (required), • Valid Driver’s License, • Strong understanding of residential HVAC systems and phases, • Ability to troubleshoot, diagnose, and clearly explain issues and solutions to customers, • Excellent customer service skills and ability to build trust, • Ability to perform thorough system inspections and communicate findings, • Commitment to safety protocols and field best practices, • Strong problem-solving skills using technical knowledge and customer-focused communication, • ServiceTitan experience (preferred), • Ability to lift ~50 lbs and work in exterior customer environments, • Comfortable working in attics, crawl spaces, and varying environmental conditions Disclaimer: The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be provided to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job Description For over 45 years, MPSW has been a trusted source for engineered HVAC solutions in Arizona. We represent top-tier manufacturers and provide technical sales support for nearly every system type—backed by expert design assistance, energy analysis, and application know-how. At MPSW, we're team-driven, service-focused, and always moving forward. If you're a self-starter who values collaboration and wants your work to make a real impact, you'll fit right in here. Reports to: Area Service Manager FLSA Status: Non-Exempt Location: Albuquerque, NM The Opportunity We are seeking an experienced Commercial HVAC Service Technician. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance, • Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment, • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator in a timely manner, • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times, • Performs other duties as assigned, • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training plus 5+ years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description Service Manager – HVAC Division Wagner Mechanical Compensation: $80,000–$110,000 Classification: Salaried Exempt | Full-Time Join Our Winning Team! About Wagner Mechanical Serving Albuquerque since 1928, Wagner Mechanical has built a reputation as the city’s most trusted home services provider. For over 90 years, we’ve delivered dependable HVAC, plumbing, and electrical solutions with a simple commitment: provide exceptional service while treating our employees and customers like family. Why Join Our Team? • Competitive Pay, • Weekly Paycheck, • Performance Bonus Opportunities, • Company-Provided Tools, • Company-Provided Vehicle & Fuel Card, • Free Uniforms, • 401(k) Match & Health Benefits (Medical, Dental, Vision), • Short & Long-Term Disability + Company Paid Life Insurance, • Paid Time Off (PTO) + Paid Holidays, • Revenue Growth: Driving team performance to meet daily, weekly, and monthly sales goals., • Team Leadership: Hiring, training, and coaching technicians to maximize performance and customer satisfaction., • Daily Operations: Managing schedules, inspecting vehicles and uniforms, and resolving employee or customer concerns promptly., • Customer Service Excellence: Responding to customer complaints professionally to build strong, lasting relationships., • Process Optimization: Evaluating and enhancing service methods to increase efficiency and productivity., • Participate in ongoing training to advance your skills and certifications., • Direct and monitor service tasks, ensuringobjectivesand sales goals are met., • Manage administrative tasks like invoicing, new orders, and inventory tracking., • Audittechnicianwork and customer service tomaintainthe highest standards., • Resolve recurring issues and develop solutions to improve operations., • Train new employees in company procedures and safety standards., • Stay updated on industry regulations, tools, and techniques to ensure compliance and innovation., • Valid driver’s licensea MUST., • High school diploma or equivalent., • Leadership Skills: Ability to motivate and drive a team to achieve revenue, efficiency, and customer service goals., • Problem-Solving: Strong ability to analyze complex situations and develop effective solutions., • Tech-Savvy: Familiarity with Service Titan and Nexstar preferred, andproficiencyin Microsoft Office., • Comfortable working in attics, crawl spaces, and tight environments., • Excellent communication, problem-solving, and customer service skills., • Professional appearance, positive attitude, and team-oriented mindset., • Ability to lift up to 50lbs, climb ladders, work in attics, crawl spaces, and other residential environments., • Experience using ServiceTitan or similar software a PLUS, • 5 plus years of relevant trade experience., • Plumbing experience is a strong plus and highly valued for this role. You’ll Be a Great Fit If You… Inspire teams and elevate standards in safety, quality, and customer service. Use data and KPIs to drive decisions and continuous improvement. Thrive in a fast-paced, growth-oriented environment and lead with urgency and integrity. Pre-Employment Requirements All employment offers are contingent on successful completion of a criminal background check, MVR review, and drug screening. These are conducted in compliance with applicable laws and regulations. Disclaimer The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job Description HVAC Helper Location: Albuquerque, NM Full-Time Compensation: $17-$20 About Us Since 1929, Wagner Mechanical has been dedicated to providing trusted HVAC, plumbing, and electrical home repairs. With nearly a century of experience, our team takes pride in delivering reliable service, quality workmanship, and lasting comfort for every home we serve. Why Join Our Team • Entry-level opportunity with hands-on, on-the-job training, • Clear career path into HVAC Technician roles, • Yearly wage increases as skills develop, • Supportive, team-oriented culture, • Consistent full-time schedule, • Ongoing technical and safety training, • Opportunity to work alongside experienced, licensed technicians, • Standard benefits package for full-time employees, • Stable, growing company serving the Austin community Position Summary The HVAC Helper is an entry-level role designed for individuals who want to learn the HVAC trade from the ground up. In this position, you will assist an HVAC Technician with installations, maintenance, inspections, and light repairs. Your primary goal is to develop the knowledge, skills, and work habits necessary to grow into a skilled HVAC professional. Starting pay is determined based on skills and experience. What You’ll Do • Assist HVAC Technicians with light repair, maintenance, and installation work, • Observe and learn all aspects of HVAC systems and building performance services, • Maintain a clean, organized job site and properly inventoried truck, • Wear floor savers and protect customers’ homes while performing service, • Communicate professionally and courteously with customers, • Complete paperwork accurately and in a timely manner, • Follow all company safety standards and best practices, • Participate actively in training sessions, morning meetings, and team events, • Follow the company Code of Ethics and Team Rules, • Remain safety-conscious on job sites and while driving, • Travel to training sessions or meetings as required (up to 25–50%), • Perform other duties as assigned What We’re Looking For • Positive attitude and strong work ethic, • Mechanical aptitude and interest in the HVAC trade, • Clean, professional appearance, • Strong communication and customer service skills, • Ability and willingness to learn and accept coaching, • Ability to work both independently and as part of a team, • Strong organizational skills and attention to detail, • Understanding of basic inventory, logistics, and tool management, • Willingness to work extended hours, weekends, or holidays as needed, • Ambition to grow within the company Education and Experience Requirements Required: • One (1) year of general labor experience using manual and power-operated tools, • High school diploma, vocational-technical school diploma, or GED, • Valid driver’s license with acceptable driving record Preferred: • Experience in the trades (HVAC, plumbing, electrical), • Experience with ServiceTitan software Physical Requirements and Working Conditions • Ability to lift approximately 50 lbs., • Ability to work outdoors in all weather conditions, • Ability to work on concrete floors and uneven surfaces for extended periods (up to 8 hours), • Ability to work in tight or awkward spaces and carry required tools and equipment, • Exposure to construction site conditions including noise from power tools and dust/debris, • Ability to sit for extended periods when required, • Ability to travel for training and meetings as needed Pre-Employment Requirements All employment offers are contingent upon successful completion of: • Criminal background check, • Drug screening, • Motor Vehicle Record (MVR) review All screenings are conducted in compliance with applicable laws and regulations. Disclaimer This job description is not intended to be an exhaustive list of all responsibilities, duties, or working conditions associated with the position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the job. Equal Employment Opportunity Wagner is proud to be an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive workplace for all employees.

Job Description Commercial HVAC/R Service Technician - Tired of the same old routine? At Helios, we're changing the game in commercial mechanical service — and we want you to be part of it. We're the fastest-growing and most trusted HVAC/R partner in the country, and our superhero technicians are at the heart of it all. Many of our top leaders started right where you are — turning wrenches and solving problems. If you're a high-energy, skilled technician who's passionate about HVAC/R and ready to be recognized for your work, this is your moment, and Helios is your home. We're not just looking for a technician. We're looking for top technicians in the industry. What Sets Helios Apart: • Top Pay — dispatched from home and paid door-to-door, • Health benefits start DAY ONE (includes an employee-only ZERO cost option), • 401K with company match, • Very generous PTO policy – in addition to paid holidays, • Tool allowances (PLUS employer-provided tools), • Career growth opportunities, promote from within culture, • Incredible bonus and recognition programs, • Company vehicle, fuel card, smart phone, and uniforms, • Ability to diagnose, repair, and calibrate commercial HVAC/R systems, • Problem-solving skills, ability to work independently, and/or as part of a team, • Excellent communicator with customers and support staff, • Keep your van stocked and your tools sharp, • Deliver quality service and integrity every single day, • Be a reliable resource for nights, weekends, and on-call emergencies., • Invest in your skills through training and certifications, • Ability to pass a background check, • Universal EPA certification, • Valid driver's license, • 2+ years in commercial HVAC — refrigeration experience a big plus, • Strong knowledge of HVAC, refrigeration, and heating principles and proficiency in reading schematics and work plans, • Strong communication and teamwork skills, • Ability to lift and carry up to 75 lbs and frequently move heavy objects., • Comfort working in extreme temperatures and tight spaces, including attics, basements, and crawl spaces., • Strong balance and coordination for climbing ladders and working at heights of 45 feet or higher., • Endurance to stand or kneel for extended periods., • Dexterity for tasks such as connecting electrical components and making precise measurements., • Required to follow all applicable safety procedures Helios HVAC/R Services LLC determines compensation based on the cost of labor across several US geographic markets. The base pay for this position is up to $45 an hour. Pay is based on a number of factors including market location, job-related knowledge, skills, and experience. • Helios is an equal opportunity employer. The company provides equal opportunity to qualified persons without regard to race, color, creed, religion, sex, national origin, age, disability, medical condition, genetic characteristics, veteran status, citizenship, ancestry, marital status, gender, or any other characteristic protected by federal, state, or local law. This nondiscrimination policy extends to all terms, conditions, and privileges of employment. #LI-JM3

Yulista Solutions LLC Regular Primary Function The Aircraft Mechanic -performs a variety of simple to moderately complex tasks on airplane general, airframe and powerplant systems. Essential Duties • Perform maintenance on aircraft, including mechanical systems, and/or ground support equipment., • Repair, inspect and maintain structural, mechanical and electrical elements of the aircraft., • Knowledgeable in the use of and be able to train others in the use of a wide variety of diagnostics devices, computers, hand, and mechanical tools., • Provide oversight and have the ability to direct and train others in the completion of aircraft related maintenance tasks., • May include Designated System Inspector (DSI) duties., • Troubleshoot systems as required to meet customer needs., • Document maintenance as per Quality Assurance (QA) and established regulatory requirements., • Perform regular Foreign Object Damage (FOD) walks., • Maintain tool control. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools., • Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor., • The Aircraft Mechanic may be required to perform other related duties to meet the ongoing needs of the organization., • Validate the number of passengers, assist in loading/unloading of passengers, weigh bags and cargo, load the aircraft, secure freight and cargo., • Oversee aircraft fueling or lavatory servicing while at out-stations such as military bases or Fixed Based Operators (FBO)., • Secure the aircraft while at out-stations for overnight parking. If functioning as a Crew Safety Specialist, the following duties are applicable: On operational missions, the Pilot in Command may assign duties to the CSS to carry out specified routine safety responsibilities and manage aft cabin safety requirements. In the event of an onboard emergency, CSSs are responsible for managing passenger safety and, if necessary, passenger evacuation. CSSs conduct cabin safety briefings. A CSS: • Manages passenger accountability, loading, and departing., • Performs passenger safety briefings., • Opens, closes, and locks entrance doors., • Handles baggage, including on-loading, off-loading, and securing the baggage in the appropriate aircraft compartment., • Weighs, loads, and restrains cargo., • Ensures compliance with aircraft baggage and cargo limitations., • Supervises refueling and checking fuel and lubricant levels., • Receives and stows catering materials., • Assists the flight crew as required. Supervisory Responsibilities None Desired Knowledge, Skills & Abilities • Beginner to intermediate computer skills specifically using Microsoft Office Suite; ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred, • Ability to enter data accurately into databases., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence, • Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members, • Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc., • Ability to follow a process., • Strong professional customer service skills, including active listening, prompt service and follow-up., • Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management., • Ability to learn and understand corporate policies and procedures and how they relate to goals., • Ability to perform basic mathematical computations, • High degree of self-motivation and the ability to work independently, • Ability to multi-task, • Climbs on top of and down from aircraft using aircraft hand/foot holds, capable of lifting up to 25 lbs. overhead, on feet all day, walk up to 2 miles per day., • QC/QA experience preferred. Required Qualifications • Federal Aviation Administration (FAA) Airplane and/or Powerplant certification., • 4+ years of aircraft maintenance on 737 Classis aircraft., • Knowledge of commonly-used concepts, practices, and procedures within the field required., • May be required to travel domestically and internationally - US Passport required., • Ability to obtain and maintain a U.S. Department of Energy (DOE) "Q" clearance within a timeframe set forth by management. US Citizenship required. PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Mission Payloads Division (MPD) is a world-class engineering and scientific leader in electronics and remote sensing systems. The Electromagnetic Effects, Test, and Mission Assurance Department resides within MPD. Our staff includes subject matter experts across a broad range of disciplines includingElectromagnetic Environmental Effects, TEMPEST, Cable and Harness, and Mission Assurance. Our expertise, combined with sophisticated in-house laboratories, prototyping, modeling, and simulation capabilities, enables the Electromagnetic Effects, Test, and Mission Assurance Department to deliver innovative solutions to national space systems and civil customers. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD! We are seeking a team player with expertise in Electromagnetic Environmental Effects, TEMPEST, Cable and Harness, or Mission Assurance areas.We work with customers throughout the Department of Defense (DoD), Intelligence Community, and civil agencies. Work Model: The selected candidate will be required to work full time on-site at our designated facility. What You'll Be Doing * Provide Electromagnetic Environmental Effects technical support to SMC, NRO, Civil and Commercial Space programs. * Review contractor EMC analytical and test reports. * Act as our customer's trusted technical authority, delivering support and expertise across the entire lifecycle - from conceptual design and requirement development to proposal assessment, design validation, launch operations, and anomaly investigation with root-cause analysis and corrective action implementation in the areas of Electromagnetic Environmental Effects, TEMPEST or Cable and Harness development and verification. * Perform evaluation of contractor spacecraft and launch vehicle electrical and electronic system and equipment designs, including intentional and unintentional electromagnetic radiated and conducted emissions and susceptibility to internal and external generated electromagnetic environments. * Duties, responsibilities, and activities may change, or new ones may be assigned as needed * Mentor junior team members in areas of expertise What You Need to be Successful - Engineering Specialist Minimum Requirements: * Bachelor's degree from an accredited university in Electrical Engineering, Physics or related STEM discipline * Minimum of 8 years of relevant technical experience * Demonstrated knowledge of Electromagnetic Theory, Physics, and lab component/circuit characterization techniques * Fundamental knowledge of EMC, ESD, and TEMPEST design techniques * Willing to travel domestically up to 25% * This position requires the ability to obtain and maintain a security clearance, which is issued by the US government. U.S citizenship is required to obtain a security clearance. Additional Requirements for Senior Engineering Specialist: * Minimum of 12 years of relevant technical experience * Proven project development and technical leadership experience How You Can Stand Out It would be impressive if you have one or more of these: * Advanced degree from an accredited program in Electrical Engineering, Physics or STEM related discipline * 12+ years of experience in Electromagnetic Environmental Effects, TEMPEST or Cable and Harness discipline * Current DoD Secret with Secret Compartmented Information SCI clearance * Track record of mentoring junior team members * Expert knowledge of EMC, ESD, and TEMPEST design techniques We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $129,000.00 - $249,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

Summary The Regional Facilities and Physical Security Manager oversee the enterprise-wide Physical Security controls and assists in the Facilities Management activities for Redwire's office environments. This position will provide administrative support for our regional physical security systems, including access control, surveillance cameras, visitor intake, alarms, and other related systems. In addition, this role will assist with basic Facilities support across various locations to ensure a safe and efficient environment. The ideal candidate will be responsible for maintaining physical security protocols, addressing facility needs, and promoting a secure workplace. The Regional Facilities and Physical Security Manager will also work with the Workplace Operations team to help maintain the Redwire Health and Safety Program, policies, and practices with a goal in reducing risk of accidents in our working environments. This role will support and foster a culture of safety and accountability while ensuring compliance with all OSHA, federal/state/local laws and general industry standards. Additionally, the Regional Facilities and Physical Security Manager will assist with managing Facilities and Physical Security vendors and contractors, including maintaining records and contracts, ensuring permits and required insurance are in place, coordinating project activities, and providing scheduling support. General support, maintenance, and expansion of facilities will also be provided as needed. Responsibilities • Oversee the administration, installation, operation, and maintenance of security systems, including alarms, cameras, access control, intrusion detection, visitor intake system., • Develop and enforce security protocols, incident response procedures, and compliance with regulatory standards., • Monitor and analyze security system performance, ensuring timely upgrades, testing, reporting, and preventive maintenance., • Partner with internal stakeholders and external vendors to ensure consistent security coverage across all locations., • Ensure proper physical security measures are maintained during business hours by following established visitor registration procedures at all sites, • Conduct and report on investigations into security incidents, implement corrective measures and work with local law enforcement and emergency services, • Facility Support - Ensure that all facilities services and repair activities are effectively delivered, and facilities needs are met across multiple Redwire locations, • Assist in preventative maintenance plans, and general building maintenance, • Assist in space management, vendor contracts and services such as security and janitorial, • Coordinate with vendors and contractors for facility upgrades and renovations, • Provide project management support as needed, • Ensure facilities meet safety, environmental, and regulatory requirements and proactively address compliance issues. Advise sites and business units of safety best practices., • Serve as a point of contact for security-related inquiries from employees and stakeholders, • Assist Redwire sites in managing and maintaining visitor intake and physical security, • Assist with new employee badging, building access control, and onboarding, • Work closely with the regional management team to assess security needs and implement effective solutions, • Evaluate cost-saving opportunities while maintaining high standards of safety and security., • Provide regular reports to leadership on system performance, facility conditions, and key metrics, • Some travel may be required to various regional locations for site assessments and coordination, • Other duties as assigned Ideal Experience, • Bachelor's degree with 5 or more years of experience, with a minimum of 2 or more years' in physical security & facilities management (manufacturing, R&D, etc) Willing to consider relevant experience in lieu of degree., • Strong technical knowledge of physical security platforms, facilities management, and best practices in industry trends, • Proven experience in security administration or facilities management, with a focus on physical security systems, • Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment, • General building knowledge (HVAC systems, electrical systems) Desired Skills, • Familiarity with security systems, access controls systems (especially w/ Verkada), • Experience preparing emergency action plans and facilitating audits and risk assessments, • Excellent communication and interpersonal skills, • Excellent organizational and time management skills, with the ability to handle multiple tasks simultaneously while maintaining attention to detail, • Attention to detail and strong organizational skills, • Experience in managing multiple facilities and projects, • Preferred Certifications: CPP (Certified Protection Professional), PSP (Physical Security Professional), FMP (Facilities Management Professional), or CFM (Certified Facility Manager) preferred

This role is ideal for an engineer who enjoys working close to hardware, solving complex electromagnetic challenges, and contributing across the full development lifecycle, from early concepts through integration and testing. Familiarity with spacecraft integration and on-orbit test. Bachelor's degr

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Plant Operation. Load hot mix asphalt into haul trucks. Manufacture various asphalt products according to mix design and customer jobsite specifications. Operate plant equipment to regulate flow of materials to and from conveyors, chutes, pumps, and storage bins. Control inventory of materials. Inspect Equipment, Structures, and Material. Perform daily inspections of the auxiliary equipment and document items in need of repair or service. Maintain stationary hot mix asphalt equipment, including but not limited to conveyors, shakers, drives, and screws. Diagnose problems and perform mechanical repair and maintenance. Monitor Processes and Materials. Monitor and review plant equipment systems to ensure continuous flow of materials and maintain certified products. Remove clogged materials when applicable. Document and Record Information. Assist plant management with record keeping and daily production schedules for submitting reports on production and maintenance. Read and write delivery tickets to determine the mix design called for each load. Issue delivery tickets to customers. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in construction aggregates and/or asphalt is required. A minimum of 3 years experience in the asphalt industry as an operator or maintenance role is preferred. Knowledge of Best Practices. A basic knowledge of the asphalt or construction industry is preferred. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to sit for long periods of time, work outside in all types of weather conditions, and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. Ability to perform basic mechanical and/or electrical maintenance and repair in support of asphalt production, including troubleshooting problems. Welding. proficient MIG, TIG, or Stick welding processes and the ability to cut and torch. Communication Skills. Ability to effectively communicate with team members, leadership, dispatchers and customers to achieve a common goal. Ability to read and interpret written orders. Computer Skills. Ability to learn and use computer systems to create a product within quality standards and produce reports. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for ___ in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. ___ to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing ___. Health Benefits. Medical, Dental, Vision programs, ___. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see ___ and helping our employees meet their goals as a key part of our business. Salary Range. The base hourly range for this role is between $27 - $30 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our ___ as it relates to the use of temporary staffing agencies, placement services and professional recruiters. : Operations : New Mexico-Albuquerque : GM - NM : Full-time : May 4, 2026, 4:42:48 PM

Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, and design-build. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as the nation's top solar contractor and one of the top 50 general contractors. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement, and employee development. Its employees consistently rank Moss as one of the best places to work. Moss' BESS Senior Electrical Superintendents plan, schedule, organize and direct the construction of major solar projects. They are responsible for all field execution of the project. Senior superintendents typically will have several Superintendents as direct reports. Senior Superintendents are responsible for coordinating the timely and cost-effective placement of the contracted work. They supervise directly or through subordinates all field construction work by the company's forces and by the Subcontractors. They are responsible for all pertinent Safety and Quality Control policies and procedures. * Manage multiple utility scale solar/bess projects * Owner interface and resource planning at program level * Support superintendents in owner discussions * Work with Project Management team for subcontracts * Support and mentor direct reports as well as manage performance reviews * Create, distribute, and enforce best practices for Electrical Field Operations * Project completion and closeout coordination * Creation and monitoring of safety initiatives * Help manage procurement and engineering schedule * Support Electrical Superintendents in creation of project schedules * Assist with scheduling shared resources * Assist managing subcontracted resources across portfolio * Coordinate with other departments for resource expectations (QC, commissioning, substation, etc.) * Budget and schedule reporting * Supports Project Executive in project change discussions * Front end/design involvement * Oversees internal design review and coordination * Coordinate with Pre-Construction for site visits * Estimate upcoming projects * Interviewing and onboarding of new salaried personnel * Perform other duties as assigned * Bachelor's in construction management, engineering or related field preferred * 5 years' experience as the General Superintendent on utility scale solar/bess projects * Journeyman or masters license (including NASCLA or other way to demonstrate proficiency in electrical best practices), or ability to obtain within 6 months after hire * STS-C Certification at a minimum, or the ability to obtain within 6 months after hire * Experience with multiple direct reports and an exceptional ability to lead and manage project teams is a necessity JOB TITLE: BESS SENIOR ELECTRICAL SUPERINTENDENT JOB LOCATION: MULTI-STATE, REQUIRES HIGH TRAVEL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: VICE PRESIDENT OF ELECTRICAL FIELD OPERATIONS Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality. Reliable Airlines is a cargo feeder operator, operating for a major cargo carrier since June 2022 in Albuquerque, New Mexico. Our world-class leadership team holds extensive strategic and operational experience in the air cargo industry. We are building a high performance team and hiring at all levels within the organization. You will be part of a broader organization that is seeking to enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers and operators with experience across aerospace, robotics and self-driving cars working to make this future a reality. As a Part 135 A&P Mechanic at Reliable Airlines, you will be part of the Maintenance team and report directly to the Director of Maintenance. Your role will be critical in maintaining operational integrity and in performing routine, preventive, and scheduled maintenance and repairs on Cessna 208 aircraft. This is an exciting and rewarding opportunity to apply your expertise and hands-on operational abilities to be a part of defining the future of aviation. We are building a high performance team expanding hiring at multiple positions within the organization. This position will be based in Albuquerque, New Mexico where the airline has commenced cargo operations flying Cessna 208's for a major logistics integrator. Responsibilities * You will operate with the highest regard for safety, compliance, and customer service * Ensure all maintenance and operational requirements are met; this may require frequent travel off-site to conduct such tasks * Work with solvents and polishing compounds as well as continuous heavy lifting and standing up to 8 hrs daily Basic Success Criteria * FAA-issued Aircraft Technician (Airframe & Powerplant) certificate * Ability to troubleshoot and repair aircraft electrical and avionics circuits using common test equipment * General fabrication and modification experience with significant Sheet Metal experience * Applicants are subject to FAA/DOT drug and alcohol testing program * Applicants must possess the legal right to work in the United States of America * Candidate must own Aircraft hand tools Preferred Criteria * Maintenance and rigging experience on P&W PT6A Engines/Airframes * Strong written & verbal communication skills * Ability to work in an ever-changing safety oriented environment This position is located in Albuquerque, NM. This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws. All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis. At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to Compensation Range: $75K - $90K

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Systems Engineering Division (SED) provides unmatched experience in systems engineering to the U.S. government and to numerous public and private agencies, universities, nonprofit organizations, consortia, and commercial companies involved in the advanced application of space technology. From systems architecture development to system analysis and optimization, astrodynamics, orbital debris, navigation, failure analysis, mission assurance, cost and schedule assessment, and economic market analysis, SED exploits an incredibly broad array of engineering and business disciplines against a diverse and dynamic portfolio of programs and national challenges. The Systems and Operations Assurance Department is the source of expertise for Operations and Facilities Engineering providing an array of technical capabilities that support our customers in assuring the availability, readiness, and success of ground assets and services required to meet the needs of the space enterprise. We have a current need for an Electrical Power Engineer(Engineering Specialist - Electrical Engineering) to join our high-performing team in solving some of today's hardest problems and help evolve our capabilities in meeting the technical challenges of tomorrow. The position requires experience with the design, development, and operations of electrical power infrastructure, particularly in the areas of power generation, transmission, distribution, protection, controls, grounding, and lightning protection systems. Work Model: This full-time position requires 100% onsite work in El Segundo CA, Chantilly VA, or Albuquerque, NM. RESPONSIBILITIES We expect the candidate to: * Provide technical expertise in identifying innovative technologies and operational enhancements to improve design, safety, resiliency/reliability and cost efficiency * Develop and implement advanced analytical techniques to evaluate facility systems and optimize overall electrical systems performance * Employ a rigorous and methodical approach to problem solving and root cause determination * Deliver independent, data-driven technical recommendations to management and customers through effective verbal and written communication * Develop/evaluate design criteria, concept design packages, support construction and commissioning operations; and develop test plans, interface control documents and test procedures * Travel to customer and/or government facilities while representing the company and department in a professional manner QUALIFICATIONS REQUIRED (Engineering Specialist - Electrical Engineering) * Bachelor's degree in electrical engineering or related field from an accredited school * 8 years of experience in design and operation of facility electrical/power systems and controls, preferably in an Architect-Engineer (A&E) firm or utility company * Engineer in Training (EIT) certificate * Knowledge of current building codes and regulations (e.g., NFPA, IBC, UFCs) * Proficiency with power distribution systems modeling and analysis tools such as SKM Power*Tools, eTAP, EasyPower * Proficiency with AutoCAD and/or analogous computer-aided drafting programs * Ability to work independently and on teams in a fast-paced environment * Experience with developing project requirements and performing electrical calculations * Strong interpersonal skills and excellent written and oral communication skills * Ability to travel • This position requires a current and active TS/SCI clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. QUALIFICATIONS REQUIRED (Senior Engineering Specialist - Electrical Engineering) * Bachelor's degree in electrical engineering or related field from an accredited school * 12 years of experience in design and operation of facility electrical/power systems and controls, preferably in an Architect-Engineer (A&E) firm or utility company * Professional engineer (PE) license * Project management experienceand ability to lead project teams * Experience leading/mentoring junior staff * Project cost estimation experience * This position requires a current and active TS/SCI clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. PREFERRED Engineering Specialist & Senior Engineering Specialist] * Master's degree in electrical engineeringor related field * Professional engineer (PE) license * Experience with high power/utility infrastructure engineering * Experience with high density data center design and operations * Experience with launch base infrastructure and facilities * Familiar with facility/infrastructure control and supervisory systems (e.g., SCADA, DCS) * Familiar with programmable logic controllers (PLCs) and control systems communications We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300 - $226,900 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

COMPANY OVERVIEW Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, and design-build. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as the nation's top solar contractor and one of the top 50 general contractors. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement, and employee development. Its employees consistently rank Moss as one of the best places to work. POSITION SCOPE AND ORGANIZATIONAL IMPACT Moss' Solar Electrical Field Project Engineers are responsible for assisting the Electrical Assistant and Electrical Project Manager in the administrative and technical management of large utility scale Solar projects. They assist in supervising all activities related to contract administration, change orders, submittals, procurement, and scheduling. Positive attitude and behavior are necessary as you will interact with staff at all levels in an ever-changing environment. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES * Responsibilities can be broken down into 4 main categories: Crew Management, Reporting, Tool Connex, Material Acquisition. (Material/Procurement/Inventory/Logistics) * Coordinates project start-up by engaging in the following: reviews owner contract, assists with development of startup checklist and site utilization plan, coordinates mobilization, assists with subcontractor & vendor selection, identifies critical issues & milestones, finalizes Prolog set up, participates in development of construction schedule, and participates in subcontractor project orientation * Expedites materials by engaging in the following: develops submittal log, establishes fabrication & delivery schedule, confirms delivery of materials, conducts submittal/SD review process, reviews coordination drawings, monitors materials stored off site, coordinates owner furnished materials, and verifies fabrication status * Coordinates construction activities by engaging in the following: strategizes with Superintendent, conducts subcontractor pre-construction meetings, maintains activity tracking logs, participates in schedule updates, conducts quality control inspections, verifies field installations, ensures compliance with safety procedures and policies, coordinates storage of delivered materials, participates in daily superintendent meetings, participates in jobsite meetings, maintains material expediting log, participates in project team visits, coordinates activities with user groups, and assists with agency inspections * Facilitates project administration by engaging in the following: expedites subcontractor and vendor agreements, assists with subcontractor and vendor insurance and bond agreements, prepares meeting agendas and minutes, assists with managing check-hold list, maintains jobsite files, processes progress photos, assists with preparation of project status reports, coordinates activities with project staff, maintains Prolog, generates correspondence, administers RFI process, and ensures compliance with company policies and procedures * Tracks project costs by engaging in the following: processes subcontractor and vendor pay requests, assists with tracking owner payments, tracks subcontractor back charges, and updates labor cost reports * Supports management for change order process by engaging in the following: creates change requests, reviews scope changes, determines schedule impacts, issues owner notification, expedites subcontractor and vendor pricing, prepares cost proposal, and negotiates proposal costs * Perform other duties as assigned EDUCATION AND WORK EXPERIENCE * Bachelor's degree in construction management, engineering, or related discipline * Six months to one-year minimum Solar internship or full-time experience as a project engineer or assistant project engineer in the construction industry * Strong computer skills are a necessity, including familiarity with construction project management applications * Strong communication and interpersonal skills and are required to interface directly with owners' representatives, the A/E team, building departments and other team members * Basic finance skills are required JOB TITLE: SOLAR ELECTRICAL FIELD PROJECT ENGINEER JOB LOCATION: MULTI-STATE, REQUIRES HIGH TRAVEL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: SOLAR ELECTRICAL SUPERINTENDENT Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

The DCS Air & Space Technology (AST) Sector is seeking a Modeling and Simulation Software Engineer to support extensive high visibility Modeling, Simulation, and Analysis (MS&A) efforts. Are you interested in working in a high-tech company on cutting edge technology to help solve national security problems? Do you want to be challenged every day supporting world class research and development? If so, DCS may be the place for you! DCS is an employee-owned organization known for creating agile technology solutions across the U.S. Defense, Aerospace, Human Factors, and Security markets. As a member of our team, you will support defense technologies along with research and development in Albuquerque, NM, having opportunities to work in a dynamic environment, with state-of-the-art simulation technologies, simulation integration experts, and experienced military Subject Matter Experts (SMEs). Our work focuses on conducting capability assessments for emerging military technologies and ensuring related tools and methodologies are suitable to inform Department of Defense (DoD) decision makers. Essential Job Functions: As this Modeling and Simulation Software Engineer, you could expect to: Collaborate with agile software development teams to design, develop, test, and deploy MS&A solutions. Collaborate with SMEs, such as modelers, analysts, and technologists, to identify requirements for system implementation in the Advanced Framework for Simulation, Integration, and Modeling (AFSIM) and other M&SA tools. Conduct software component and system integration testing to ensure compliance with specifications. Apply software best practices (version control, documentation, etc.) for all developed and modified software. Construct military behavior models and entities of varying complexity in AFSIM. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. At least a BS degree in Computer Science, Aerospace, Electrical, or Mechanical Engineering, and 2 years of related experience. Applicants selected will be subject to a U.S. Government background investigation and must meet eligibility requirements for access to classified information. Must have an active Top-Secret level U.S. DoD security clearance. Experience developing object-oriented software in C/C++ with Visual Studio integrated development environment. Experience creating AFSIM software and tools, including source code and plugin development. Excellent written and verbal English communications skills. Ability to work well in team environments. Ability to travel, as required. Desired Skills: Familiarity with modern military systems, both foreign and domestic. MS in Computer Science, Aerospace, Electrical, or Mechanical Engineering. Experience with any of the following: Linux, CMake, Python, or Git. Familiarity with C#.

Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, and design-build. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as the nation's top solar contractor and one of the top 50 general contractors. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement, and employee development. Its employees consistently rank Moss as one of the best places to work. Moss' Bess Electrical Superintendent will be responsible for providing coordination, planning, and supervision to forepersons, contractors, and craft activities on a utility scale Bess site. Develop and enhance customer relationships by providing superior service. This position must be willing to travel. * Plan and supervise and/or craft activities - includes determining method of construction, manpower levels, material quantities, equipment, temporary power sources, work schedule, manpower estimates, labor budgets, and documenting actual hours worked * Coordinate electrical work with work of different crafts, company departments, or other contractors onsite * Maintain liaison with engineering, estimating, and planning to ensure work complies with drawings, specifications, and schedule * Assist in resolving construction problems (lack of productivity, work interfaces, etc.) * Monitor craft compliance with project safety program requirements; document and ensure corrective measures are implemented * Maintain liaison with other departments (i.e., Material Control, Purchasing, Quality Control, Engineering) to ensure all required materials, equipment, inspections, etc,support craft activities and project schedule * Perform additional assignments per supervisor's direction * Delegate responsibility and assure its proper completion * Perform other duties as assigned * Must prioritize safety before all else and lead by example; must have a minimum of OSHA30 * Electrical field installation experience within a solar plant or heavy industrial environment * Self-Perform Bess Construction Experience is highly preferred * 3 years' supervisory experience in a power plant or with heavy industrial construction * Demonstrated ability to supervise 50 or more employees * Demonstrated planning and scheduling experience * Demonstrated knowledge of, reading, interpreting, and working withElectrical design drawings (isometric and orthographic), design guides, specifications * Contract documents and site coordination of subcontractors * 4-5 years previous experience as a General Foreman or 3 Years as a Superintendent in a single discipline on an industrial construction project. Previous background of man hour reports, job cost reports, and workforceplanning is required * Must be willing to learn new techniques/skillset JOB TITLE: BESS ELECTRICAL SUPERINTENDENT JOB LOCATION: MULTI-STATE, REQUIRES HIGH TRAVEL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: GENERAL SUPERINTENDENT Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, and design-build. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as the nation's top solar contractor and one of the top 50 general contractors. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement, and employee development. Its employees consistently rank Moss as one of the best places to work. Moss' Solar Senior Electrical Superintendents plan, schedule, organize and direct the construction of major solar projects. They are responsible for all field execution of the project. Senior superintendents typically will have several Superintendents as direct reports. Senior Superintendents are responsible for coordinating the timely and cost-effective placement of the contracted work. They supervise directly or through subordinates all field construction work by the company's forces and by the Subcontractors. They are responsible for all pertinent Safety and Quality Control policies and procedures. * Manage multiple utility scale solar projects * Owner interface and resource planning at program level * Support superintendents in owner discussions * Work with Project Management team for subcontracts * Support and mentor direct reports as well as manage performance reviews * Create, distribute, and enforce best practices for Electrical Field Operations * Project completion and closeout coordination * Creation and monitoring of safety initiatives * Help manage procurement and engineering schedule * Support Electrical Superintendents in creation of project schedules * Assist with scheduling shared resources * Assist managing subcontracted resources across portfolio * Coordinate with other departments for resource expectations (QC, commissioning, substation, etc.) * Budget and schedule reporting * Supports Project Executive in project change discussions * Front end/design involvement * Oversees internal design review and coordination * Coordinate with Pre-Construction for site visits * Estimate upcoming projects * Interviewing and onboarding of new salaried personnel * Perform other duties as assigned * Bachelor's in construction management, engineering or related field preferred * 5 years' experience as the General Superintendent on utility scale solar projects * Journeyman or masters license (including NASCLA or other way to demonstrate proficiency in electrical best practices), or ability to obtain within 6 months after hire * STS-C Certification at a minimum, or the ability to obtain within 6 months after hire * Experience with multiple direct reports and an exceptional ability to lead and manage project teams is a necessity JOB TITLE: SOLAR SENIOR ELECTRICAL SUPERINTENDENT JOB LOCATION: MULTI-STATE, REQUIRES HIGH TRAVEL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: VICE PRESIDENT OF ELECTRICAL FIELD OPERATIONS Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, and design-build. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as the nation's top solar contractor and one of the top 50 general contractors. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement, and employee development. Its employees consistently rank Moss as one of the best places to work. Moss' Solar Electrical Superintendent will be responsible for providing coordination, planning, and supervision to forepersons, contractors, and craft activities on a utility scale solar site. Develop and enhance customer relationships by providing superior service. This position must be willing to travel. * Plan and supervise and/or craft activities - includes determining method of construction, manpower levels, material quantities, equipment, temporary power sources, work schedule, manpower estimates, labor budgets, and documenting actual hours worked * Coordinate electrical work with work of different crafts, company departments, or other contractors onsite * Maintain liaison with engineering, estimating, and planning to ensure work complies with drawings, specifications, and schedule * Assist in resolving construction problems (lack of productivity, work interfaces, etc.) * Monitor craft compliance with project safety program requirements; document and ensure corrective measures are implemented * Maintain liaison with other departments (i.e., Material Control, Purchasing, Quality Control, Engineering) to ensure all required materials, equipment, inspections, etc,support craft activities and project schedule * Perform additional assignments per supervisor's direction * Delegate responsibility and assure its proper completion * Perform other duties as assigned * Must prioritize safety before all else and lead by example; must have a minimum of OSHA30 * Electrical field installation experience within a solar plant or heavy industrial environment * Self-Perform Solar Construction Experience is highly preferred * 3 years' supervisory experience in a power plant or with heavy industrial construction * Demonstrated ability to supervise 50 or more employees * Demonstrated planning and scheduling experience * Demonstrated knowledge of, reading, interpreting, and working withElectrical design drawings (isometric and orthographic), design guides, specifications * Contract documents and site coordination of subcontractors * 4-5 years previous experience as a General Foreman or 3 Years as a Superintendent in a single discipline on an industrial construction project. Previous background of man hour reports, job cost reports, and workforceplanning is required * Must be willing to learn new techniques/skillset JOB TITLE: SOLAR ELECTRICAL SUPERINTENDENT JOB LOCATION: MULTI-STATE, REQUIRES HIGH TRAVEL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: GENERAL SUPERINTENDENT Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality. As a Sr. Manufacturing Engineer (Aircraft Integration) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment. Responsibilities * Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products * Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements * Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production) * Develop and ensure compliance with all policies, procedures, quality management systems, technical bulletins, engineering orders, service bulletins, and airworthiness directives * Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained * Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability * Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained Basic Success Criteria * Bachelor's Degree in Mechanical, Electrical, Aerospace, Systems Engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations * 7+ years of aircraft design, manufacturing, inspection, and/or testing experience * 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics * 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter Preferred Success Criteria * Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate * Prototype/R&D development or New Product Introduction (NPI) experience * Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR ___, and/or 14 CFR Part 145 * Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems * Maintenance and rigging experience on P&W PT6A Engines/Airframes * Previous leadership or management experience Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company. The position will be located at our facility in Albuquerque, NM, but will require frequent travel to San Martin, California. Must be willing to travel 30% of the time (primarily training in San Martin, CA). The estimated salary range for this position is $135,000 to $190,000. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment. This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws. All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis. At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to Compensation Range: $135K - $190K

COMPANY OVERVIEW Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, and design-build. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as the nation's top solar contractor and one of the top 50 general contractors. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement, and employee development. Its employees consistently rank Moss as one of the best places to work. POSITION SCOPE AND ORGANIZATIONAL IMPACT Moss Energy is seeking a skilled Commissioning Technician to support the startup and delivery of utility-scale solar and battery energy storage (BESS) projects. This role is responsible for executing commissioning activities across electrical systems to ensure safe, reliable, and efficient project energization. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Perform testing and commissioning of medium- and low-voltage electrical systems, including inverters, and power distribution equipment, • Execute NETA-based testing (Megger (insulation resistance), VOC Testing, VLF, TTR) to validate system performance and integrity, • Support system startup, energization, and troubleshooting of both AC and DC components on solar and BESS projects, • Interpret electrical drawings, schematics, and one-line diagrams to verify installation and resolve field issues, • Coordinate with construction, and SCADA teams to ensure proper system integration and communication, • Document commissioning activities, test results, and turnover packages in accordance with project and industry standards, • Maintain strict adherence to safety protocols, electrical codes, and site requirements, • Experience commissioning electrical systems in solar, BESS, or utility/industrial projects, • Strong knowledge of electrical testing methods and equipment, • Ability to read and interpret technical drawings and control logic, • Hands-on troubleshooting and field execution experience, • Willingness to travel to project sites as needed JOB TITLE: COMMISSIONING TECHNICIAN JOB LOCATION: MULTI-STATE REQUIRES HIGH TRAVEL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: COMMISSIONING DIRECTOR Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Description Leidos has an opening for an Electro-Mechanical Technician to work in our Albuquerque, NM office. This exciting opportunity will challenge you to use your problem-solving skills to develop the next generation of directed energy (DE) weapons for the US Air Force. You will join a team that conducts research, development and testing on high power electromagnetic (HPEM) components and systems at Kirtland, AFB. Primary Responsibilities • Work independently to operate, repair and maintain high-power equipment such as power supplies, vacuum pumps, electric generators and circulation pumps., • Build and implement control boards and safety interlocks., • Work with the engineering team to troubleshoot hardware problems, brainstorm solutions and implement them., • Set up field experiments with sensors and instrumentation, collect data records and archive them., • Track equipment and spares inventory and initiate purchase orders necessary to maintain stock., • Build and repair cables Basic Qualifications • Must be a US Citizen with the ability to obtain and maintain a DoD Secret clearance., • A high school diploma with more than 3 years of related experience or an Associate’s degree with prior relevant experience., • Ability to create, read, interpret and update electrical schematics and drawings., • Maturity and integrity to understand and abide by facility rules and regulations for personnel safety and environmental compliance. Preferred Qualifications • Experience working with high voltage (up to 100 kV) and high current (up to 10 kA) power systems., • Familiarity with diagnostic equipment including multimeters, oscilloscopes, and LCR impedance meters, network analyzers, spectrum analyzers, as well as calipers and micrometers., • Familiarity with antennas and microwave field mapping., • Knowledge of control systems, including relay logic, Allen Bradley controllers, supervisory controllers (SCADAs) and LabView-based systems., • Familiarity with the National Electric Code (NEC). A current license is highly desirable., • Experience with modifying and maintaining military vehicles., • Experience with the setup, operation, and maintenance of product lines., • Cable fabrication including fiber optic cables., • Soldering skills NKE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 28, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $57,850.00 - $104,575.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Telecommunications Engineering Technician to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Albuquerque, NM. The ideal candidate will support the daily operations of FAA's the Telecommunications Systems. This new system will replace outdated infrastructure including radar, software, hardware and telecommunications networks to manage modern travel. Telecommunications Engineering Technician Job Duties Include: • Review FAA databases and provide input and or draft Site Survey Reports (SSR)., • Conduct site surveys to provide input and/or draft Site Survey Reports., • Coordinate schedules with SSC, ES, and vendor personnel., • Draft Project Risk Plans (PRP) and Operational Risk Management Plans (ORMP)., • Generate and/or update drawings, sketches, and artifacts., • Draft project plans for site preparation activities., • Coordinate scheduled outages with SSC, Air Traffic and Operations personnel., • Develop transition plans., • Resolve schedule conflicts., • Accompany unbadged personnel at facilities., • Work with LECs on schedules., • Develop briefings/information/reports on District status., • Work with other Districts/SSC on interstate service flows, transitions, cutovers, planning, etc., • Support District POC and SSCs with day-to-day work activities., • Review and provide comments on vendor Site Specific Implementation Plans (SSIP). Telecommunications Engineering Technician Required Qualifications: • Bachelor’s degree in Electronics Engineering and 4 to 8 years of relevant experience OR a Master's degree and 2 to 6 years. Additional experience may be substituted/considered/accepted in lieu of degree., • Ability to travel 75-100%., • Ability to obtain a Public Trust Security Clearance Suitability (To be eligible for Public Trust Security Clearance, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years of the past 5 years consecutively with no breaks)., • Proficiency in MS Office Suites. Desired Qualifications: • 2+ years of experience working with Telco systems performing Network Troubleshooting., • Proficient working with AutoCAD or similar tools., • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower., • Knowledge of OSHA and general construction and electrical safety standards., • Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG. Leidos is a Fortune 500™ company aimed at embracing and solving some of the world’s most pressing challenges through science and technology. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 22, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Job Title: Mechanical Assembler Job Description The Mechanical Assembler builds and assembles mechanical components and complete systems used in demanding construction and mining applications. This role involves assembling mechanical, electrical, hydraulic, and pneumatic systems for mobile water tanks, trailers, dump bodies, stationary structures, and other equipment by following blueprints and using a variety of hand and power tools in a production environment. Responsibilities • Assemble mechanical components, electrical systems, hydraulic systems, and pneumatic systems according to blueprints and work instructions., • Build and fit mobile water tanks, fuel tanks, coal haulers, bottom-dump trailers, equipment transports, and stationary structures for construction and mining use., • Use hand tools, power tools, and measuring tools such as tape measures to complete assembly tasks accurately and safely., • Read and interpret blueprints, safety rules, operating instructions, maintenance instructions, and procedural documents to guide assembly work., • Follow repetitive production processes while maintaining quality and consistency across all assembled products., • Follow verbal and written instructions from supervisors and leads to complete daily production requirements., • Perform general labor tasks related to assembly, including material handling, positioning parts, and preparing work areas., • Inspect assembled components for proper fit, alignment, and function, and make adjustments as needed., • Work efficiently to meet production goals and support increased workload as demand and overtime opportunities arise., • At least 2 years of experience working in a production environment., • Hands-on experience with mechanical assembly using hand and power tools., • Ability to read and interpret blueprints for mechanical and structural assemblies., • Basic knowledge of mechanical systems and components., • Ability to work with hydraulic, electrical, and pneumatic components during assembly., • Ability to read and understand safety rules, operating and maintenance instructions, and procedural documents., • Capability to follow repetitive work processes while maintaining attention to detail and quality., • Ability to follow verbal instructions clearly and accurately., • Physical ability to stand, bend, and climb for long periods of time while performing assembly work., • Experience assembling large mobile equipment or trailers is beneficial., • Back ground in mechanical, electrical, or hydraulic work is an advantage., • Comfort working with general labor tasks in a production and fabrication setting., • Ability to work effectively as part of a close-knit team and support team-based production goals. The work environment includes both outdoor areas and some indoor shop space, and you need to be comfortable working in a range of weather conditions, including sun, clouds, heat, and cold. You will assemble large water and fuel tanks, coal haulers, bottom-dump trailers, and equipment transports used in construction and mining applications around the world. The role involves frequent standing, bending, and climbing for extended periods while working with hand and power tools and measuring equipment. The position follows a Monday–Friday day shift schedule from 6:00 a.m. to 2:30 p.m., with overtime opportunities as workload increases. Job Type & Location This is a Contract to Hire position based out of Albuquerque, NM. Pay and Benefits The pay range for this position is $22.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Janitors and Cleaners, Except Maids and Housekeeping Cleaners Keep buildings in clean and orderly condition. Perform heavy cleaning duties, such as cleaning floors, shampooing rugs, washing walls and glass, and removing trash. Duties may include performing routine maintenance activities, notifying management of need for repairs, and cleaning debris from sidewalk. Tasks • Clean building floors by sweeping, mopping, scrubbing, or vacuuming them., • Gather and empty trash., • Service, clean, and supply restrooms., • Clean and polish furniture and fixtures., • Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees., • Dust furniture, walls, machines, and equipment., • Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications., • Steam-clean or shampoo carpets., • Strip, seal, finish, and polish floors., • Clean and sweep parking lot., • Follow procedures for the use of chemical cleaners and power equipment, in order to prevent damage to floors and fixtures., • Monitor building security and safety by performing such tasks as locking doors after operating hours and checking electrical appliance use to ensure that hazards are not created., • Move heavy furniture, equipment, and supplies, either manually or by using hand trucks., • Notify managers concerning the need for major repairs., • Requisition supplies and equipment needed for cleaning and maintenance duties. Conserjes y Limpiadores, Excepto las sirvientas y limpiadores de Casa Mantener edificios en estado limpio y ordenado. Realizar trabajos pesados de limpieza, como limpieza de pisos, lavado de alfombras, lavado de paredes y vidrio y levantando la basura. Las tareas pueden incluir realizar actividades de mantenimiento de rutina, notificar a la administración de la necesidad de alguna reparacion y recoger la basura de la banqueta. Tareas Limpiar pisos del edificio por medio de, barrer, trapear, fregar o aspirar. Recoger y vaciar las basuras. Limpiar los Baños y poner papel y jabón. Limpiar y pulir muebles y accesorios. Limpiar ventanas, cubículos de cristal y espejos, usando agua con jabón u otros limpiadores, esponjas y jalador de agua. Desempolvar muebles, paredes, máquinas y equipo de maquinaria. Mezcla de agua y detergentes o ácidos en recipientes para preparar soluciones de limpieza, según las especificaciones. Limpiar alfombras con vapor o con champú. Estripiar, encerar, y pulir los pisos. Limpiar y barrer el estacionamiento. Siga los procedimientos para el uso de limpiadores químicos y equipo eléctrico, con el fin de evitar daños a plantas y accesorios. Vigilar la seguridad del edificio realizando tareas tales como cerrar con llave las puertas después de horas de funcionamiento y revisando el uso de aparatos eléctricos que no se conviertan en un peligro. Mover muebles pesados, equipos y productos de limpieza, ya sea manualmente o mediante el uso de carros de mano. Notificar a los administradores sobre la necesidad de reparaciones mayores. Requisición de productos de limpieza y equipos necesarios para las tareas de limpieza y mantenimiento.

Note : This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the healthcare job market. Looking to start a rewarding career path in the healthcare industry? Use Dreambound to find a Electrocardiogram program that will prepare you for this high-demand, entry-level role. What does an ECG / EKG Technician do? An ECG / EKG technician conducts diagnostic tests to measure and record the electrical activity of the heart, helping physicians diagnose and monitor cardiac conditions. Highlights : • Complete in just a few weeks, • Flexible hybrid and in-person options available This program is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 70+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Job Description: Fire Safety Advisor – BESS is responsible for developing, implementing, and overseeing all safety, health, and environmental (HSE) programs related to Battery Energy Storage System (BESS) projects. This role ensures regulatory compliance, risk mitigation, and a strong safety culture across all phases of BESS development, construction, commissioning, and operations. Fire Safety Advisor will serve as the subject matter expert for BESS-specific hazards, including electrical safety, thermal runaway risk, fire prevention, and emergency response. Job Responsibilities: • Serve as the primary safety authority for all BESS and related projects., • Champion a proactive, "zero-incident" safety culture across all teams and contractors., • Identify and mitigate hazards related to high-voltage systems, lithium-ion batteries, thermal runaway, arc flash, and fire suppression systems., • Review BESS designs, layouts, and construction methodologies for safety and code compliance., • Develop and implement Emergency Response Plans (ERP) for fire, explosion, and hazardous material events., • Oversee site safety plans (SSSP) for all BESS construction projects., • Conduct site audits, inspections, and safety observations., • Ensure compliance with Lockout/Tagout (LOTO), energized work permits, confined space, hot work, and fall protection requirements., • Lead incident investigations, root cause analysis, and corrective action implementation., • Oversee the staffing and training of core site safety professionals to staff all BESS projects., • Manage safety documentation, reporting, and recordkeeping., • Serve as the primary contact during regulatory inspections or audits., • Deliver BESS-specific safety training programs., • Ensure required certifications and qualifications are maintained for employees and contractors. While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-AE1 Pay Range $60—$70 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description Velos is a full-service engineering and technical services company supporting agencies such as the DoD NASA, and NOAA. As an SBA-certified HUBZone small business, Velos combines agile and highly skilled engineering and technical support-delivering unmatched execution to our customers. Our government relations consulting business area allows us to represent and support leaders in the defense, aerospace, intelligence, and related industries with decades of experience in market analysis and strategic planning. We are looking for highly qualified candidates for an upcoming contract positioned onsite at the Kirtland AFB in Albuquerque, NM supporting the Air Force Research Laboratory (AFRL) SSHINE contract. Spacecraft AI&T Engineer: Qualified candidates are knowledgeable spacecraft Assembly, Integration, and Test engineers with experience working on classified programs. Launch site experience preferred. Roles and Responsibilities: Supports the assembly, integration, and testing activities for satellite systems, ensuring the deployment and operation of satellites. Defines and procures ground support equipment (GSE) for testing and integration activities. Develops and executes satellite integration and testing procedures, including environmental tests such as vibration, thermal vacuum, and electromagnetic interference. Manages the verification and validation process, ensuring compliance with requirements and standards. Coordinates with cross-functional teams, including design, mechanical, electrical, and systems engineers, to integrate and test satellite subsystems and components. Conducts risk assessments, identifies potential issues, and implements mitigation strategies to ensure the reliability and safety of satellite operations. Participates in the spacecraft unit qualification test campaigns and supports launch site operations. Maintains detailed documentation of integration and testing activities, including test plans, procedures, and results. Collaborates with external vendors and stakeholders, providing technical expertise and ensuring adherence to project timelines and budgets. Ensures adherence to safety, quality, and regulatory standards throughout the assembly, integration, and testing process. Education Requirements: • 10+ years of experience with BS degree or 5+ years of experience with MS degree or 0+ years of experience with PhD degree. Clearance Requirements: • TS with ability to obtain SCI. Velos is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sex, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Great Western Trailer (GWT) is immediately hiring full-time Tank Technicians to service semi-trailers at our Albuquerque, NM facility. As a Tank Technician, you will inspect, repair, and maintain tanks in accordance with Department of Transportation (DOT) and ASTM regulations. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance. GWT is looking for hardworking individuals who are: * Quick Learners – Willing to follow instructions, ask questions, and grow their skills. * Team Players – Punctual, reliable, and respectful, with the ability to work independently. * Focused & Detail-Oriented – Committed to accuracy, quality, and safety. * Safety-Minded – Always adheres to company safety policies and procedures. Tank Technician Responsibilities Inspect, Service & Repair: • Tanks and trailers to meet FHWA, FMCSA, DOT HM183, and hazmat standards., • Pneumatic and hydraulic control systems, product pumps, and piping., • Overfill systems (Scully, Civacon, Flotech, Titan Logix, Garnett)., • Air brake systems, valves, sensors, dome lids, shoes, drums, pads, and rotors., • Low voltage wiring, harnesses, lights, batteries, and charging systems., • Chassis, side-shells, caps, doors, retainers, fasteners, floors, and plates., • Perform preventative maintenance and minor mechanical repairs., • Install add-on components (toolboxes, pumping systems, ladders, brackets)., • Perform aluminum and steel MIG/TIG welding, including in confined spaces., • Fabricate hydraulic pump systems and perform wood/metal carpentry., • Complete wreck repairs and custom fabrication., • Complete Mechanic’s Service Reports., • Prepare FHWA and HM183 testing documentation., • Minimum 3 years of experience working on or around tank vehicles or pressure vessels., • (Candidates without this experience may be considered for Trailer Technician roles instead.), • Ability to lift/move up to 50 lbs., • Own a personal set of hand tools (except in California)., • Strong mechanical knowledge of tank and semi-trailer equipment., • Ability to operate hand, power, pneumatic tools, and welding equipment safely., • 3+ years of tank vehicle service experience., • Registered Tank Inspector certification., • Additional certifications such as Tank, ASE, or welding., • Bilingual (Spanish) is a plus., • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Use of hands and arms for handling tools and materials., • Work in confined spaces and at heights., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures., • Moderate to loud noise levels; potential risk of electrical shock. Great Western Trailer (GWT) is a growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states. We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK—and we’re expanding! Apply Today! If you're passionate about tank trailer repair and want to grow with a company that values your skills, apply now and join our team in Albuquerque, NM! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.