Trabajos Engineering en Aurora, Colorado - Page 2Crear alertas

Job DescriptionSalary: $95,000 - $130,000 + Incentive Compensation Applicants must possess current US Work Authorization, and not require employer-sponsored VISA support. Iconergy seeks to add an ASHRAE BEMP certified energy engineer to our energy consulting team. The successful candidate will lead energy modeling projects and support Iconergys senior engineers in project development by gathering data from on-site audits, performing engineering calculations for efficiency and facility improvement measures. You will work on new and retrofit projects that improve facility operations, especially energy and/or water efficiency. Our projects also incorporate renewable energy whenever possible. The projects often address the following systems: HVAC, controls, water fixtures, lighting, ancillary systems and equipment (distributed generation, cooking kitchens, pools, etc.), and renewable energy (solar PV, solar thermal, etc.) systems and water metering systems. These projects improve the occupancy conditions inside the facilities while reducing operating and maintenance costs and the use of natural resources. A day in the life of the successful candidate: You will serve as support to senior Iconergy engineers, our clients, and our partners. For example, you will: • Undertake whole building energy modeling and design analysis for high performance metrics, LEED, code, etc., • Research new and existing technologies for application in the built environment., • Provide LEED strategy and advice, particularly around energy and IEQ aspects., • Analyze efficiency measures for utility savings., • Perform energy modeling with energy plus software., • Assist in preparation of audit reports and other client communications., • Bachelors Degree in Mechanical or Architectural Engineering. Other degrees may be considered with appropriate work experience., • 5-7 years of work experience in HVAC design, energy engineering, or similar consulting engineering work., • Prior energy audit and energy modeling experience required., • LEED Accredited Professional, • ASHRAE BEMP certification (required), • Experience with Microsoft Excel VBA, AutoCAD/Revit, and energy modeling software (eQUEST, Trane Trace, Energy Plus)., • Understanding of building systems (mechanical, electrical, plumbing, architectural, structural) ., • Experience with energy/water efficiency and renewable energy systems a plus., • Demonstrated excellence in communication (written and oral) in English., • Pass NCIC background check (required)., • Pass an initial drug test and subsequent random drug tests (required)., • Hold a valid drivers license and provide your own mode of transportation (required). We value teammates who are committed to the Iconergy team and adaptable to potential shifts in the specifics of their role. Our positions are similar to those at other growing firms: they are functions of the marketplace and, therefore, dynamic. We are constantly evolving our services and also addressing client requests that may change the description in a number of ways over time. Benefits • Health, Vision, And Dental Insurance Plans, • Flexible Savings Account & Health Savings Account options, • Company Paid Short-And Long-Term Disability, • Paid Time Off (Personal and Holidays), • 401k With Company Match, • License/Certification Reimbursements, • Wellness Gym Membership Stipend, • Company paid cell phone or cell stipend, • RTD pass and mileage reimbursement, • Performance Incentives Iconergy is an equal opportunity employer, and we value diversity. We encourage applications from all demographics and especially those that are traditionally under-represented in engineering and construction.

Job Description Job Title: FIELD ENGINEER - Biogas and Engineering Operations Location: Remote (with Travel) Company Overview ENERGYneering Solutions (ESI), a TransTech Energy Company, provides exceptional technical expertise in engineering and operations for both the renewable and traditional energy industries. Since 2007, ESI has specialized in the design, construction, and operations of biogas projects, collectively producing over one million MWh of renewable electricity and more than 50 million gallons of renewable vehicle fuel annually. Headquartered in scenic Central Oregon, at the foot of the Cascade Mountain Range, ESI embraces the region's quality of life and encourages a healthy, active lifestyle for its employees, aligning with its core principle of unmatched experience, flexibility, and follow-through for its clients. Job Overview The Field Engineer will work closely with the business development team, engineers, project managers, and ESI’s construction partners to support the construction and startup of the company’s EPC biogas utilization projects. The position requires implementing sound engineering principles to ensure project designs are implemented and installed to meet regulatory requirements and ESI’s internal quality standards. An ability to work independently, lead the Construction team, and communicate effectively with internal partners, customers and subcontractors is of the utmost importance to this position. The position is based remotely, and the successful candidate will spend most of their time at our active project construction sites. They will report to the Director of Projects. Responsibilities and Duties • Manage site construction activities to meet construction schedules, budgets, and safety requirements., • Monitor and manage craft employees for optimal execution of self-performed work., • Provide support to Construction Superintendent for the execution of the work and assist in the resolution of field problems as necessary., • Engage with clients and apply technical knowledge to practical problems., • Handle change order negotiations with clients and subcontractors., • Monitor dimensional control of subcontracted work; checks and verifies the accuracy of all dimensions on the plans and shop drawings; initiates RFls in a timely manner to resolve discrepancies before they can cause construction delays., • Collaborate with Project Management team to prepare and update project schedules., • Oversee the negotiation of terms of agreements, drafting of contracts, and the acquisition of permits and licenses., • Coordinate with subcontractors, customer auditors and internal Finance and HR teams to support ongoing compliance with prevailing wage and apprenticeship requirements specific to Inflation Reduction Act tax credit eligibility., • Ensure completion of daily Job Safety Analysis (JSAs)., • Work with HSE staff to ensure projects meet environmental and regulatory requirements., • Estimating costs and managing assigned work within budget., • Support the review and response to contractor RFIs., • Support ESI’s Operations Division., • Communicate and collaborate with cross-functional partners such as Operations, Business, • Development, Project Management, HR, and IT., • Apply RACI principals to support an accountability framework for special projects., • Seek ways to improve and promote quality, demonstrating accuracy and thoroughness in all work., • Willingness and ability to respond to urgent issues outside normal business hours., • Remote position but requiring 75% travel each month., • Other duties as assigned. Minimum Qualifications: • 8 years of Industrial Engineering and Construction project experience including a minimum of 2 years of onsite construction management experience., • Valid driver’s license for the state of residence., • Working knowledge of construction site hazard assessment, • Working knowledge of OSHA Part 1926 – Safety and Health Regulations for Construction., • Proficiency in utilizing the 3D Plant Model., • Ability to create field sketches for onsite personnel., • Proficient with the Microsoft Office suite of software. (Word, Excel, PowerPoint, etc.) Preferred Qualifications • Proficiency in MS Project, ProCor other project management/scheduling software., • Free HSA health plan or traditional PPO, • 401(k) with generous company match (Safe Harbor), • Dental, vision, and optional coverage like accident & critical illness insurance, • HSA and FSA accounts to save on healthcare costs, • Company-paid Life, Long Term Disability, and AD&D insurance, • Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program, • Discounts on gyms, shopping & entertainment, • Unlimited Paid Time Off, • Paid Holidays ESI is located in beautiful Central Oregon, at the foot of the Cascade Mountain Range and the edge of the Deschutes National Forest, surrounded by world-class skiing, biking, hunting, fishing, hiking, climbing, and just about any other outdoor activity you can imagine. ESI elected to build its headquarters in Central Oregon because of the quality of life the region provides. The company takes pride in encouraging a healthy and active lifestyle for its employees. ESI’s core values include pride of ownership, a limitless desire to learn, and a relentless approach to solving any challenge. A successful ESI employee not only embraces these values but knows when to lean on the team for support and guidance. We acknowledge that our fast-paced and dynamic environment is not for everyone, but if you are looking for independence and new challenges, ESI will be a great fit. This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #ESI

Job Description Multidisciplinary design firm is seeking a Senior Civil Engineer - Data Center to join their Denver team! Responsibilities: • Serve as project manager and/or lead design engineer, • Prepare planning/design documents, • Process design calculations, • Develop/maintain project team, • Lead QA/QC efforts, • Serve as technical advisor on complex projects, • Coordinate project with other internal teams, professional/technical staff, clients and outside consultants, • Travel to job sites for observation, • Attend client meetings Requirements: • Bachelor’s degree in civil engineering, • 6+ years of related project experience, • PE License, • Proficient in Civil 3D software Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description SciTec has been awarded multiple government contracts and is growing our creative Team! SciTec, Inc. is a dynamic small business with the mission to deliver advanced sensor data processing technologies and scientific instrumentation capabilities in support of National Security and Defense. We support customers throughout the Department of Defense and U.S. Government in building innovative new tools to deliver unique world-class data exploitation capabilities. Important Notice: SciTec exclusively works on U.S. government contracts that require U.S. citizenship for all employees. SciTec cannot sponsor or assume sponsorship of employee work visas of any type. Further, U.S. citizenship is a requirement to obtain and keep a security clearance. Applicants that do not meet these requirements will not be considered. SciTec has an immediate opportunity for a talented Senior Datacenter Engineer to join our team in Boulder, CO. Successful applicants will bring deep experience with data center design, configuration, & maintenance, familiarity with hardware procurement, a readiness to work hands-on keyboard to solve challenging data center problems, a strong collaborative spirit, experience successfully mentoring junior team members, superior problem solving skills, a passion for security and data protection, and a clear focus on supporting customer needs. Responsibilities • Recommend and follow technical standards for data center configuration., • Document technical configurations for both datacenters and for cloud architecture., • Install and configure servers and necessary applications to support data center and Infrastructure strategy., • Configure, monitor, and periodically test backup/recovery of systems., • Proactively monitor data center status/health and address issues as appropriate., • Perform system upgrades and patches as necessary to include firmware, operating system, and applications., • Engage with vendors for license renewals, hardware/software, and support contracts., • Support system administrator personnel as necessary to resolve end user and systems issues., • Ensure security standards and practices are implemented and maintained within the infrastructure environment., • Sets up, configures, and supports internal and/or external networks., • Develops and maintains all security and network configurations., • Troubleshoots all data center and network performance issues., • Maintains and exercises a disaster recovery plan annually., • This individual is responsible for architecting and administering the following environments:, • Linux and Windows server environments, • Dell SAN and Tiered NAS storage solutions, • VMware / vSphere environment, • Data networking (routing and switching including Cisco 9000 Series), • Virtual Desktop Infrastructure (VDI) solutions, • Backup and replication configuration and testing, • Palo Alto SDWAN and NGFW environments, • 8+ years professional experience performing duties of a datacenter engineer, • CompTIA Security + (Plus) Certification, • Knowledge of Microsoft Windows server environments including experience managing Active Directory, • In-depth working knowledge and experience with VMware / vCenter / vSphere, • General working knowledge and previous experience supporting Windows Server Failover Cluster (WSFC) services, • Expert understanding of LAN/WAN principles and protocols, including BGP routing, • In-depth experience designing, deploying, and managing firewalls, • A bachelor’s degree in computer science, engineering, information technology or related field, • Ability to obtain and maintain a DoD security clearance, • Demonstrated attention to detail, • Good verbal and written communication skills Candidates meeting the following criteria will be preferred: • Active DoD TS/SCI clearance, • Candidates with OCP Red Hat experience will be highly preferred, • Experience managing Palo Alto and Panorama firewalls, • Direct experience configuring and supporting Dell Powerscale, Powerstore and/or Unity, • In-depth knowledge and experience with Cohesity or Veeam backup solutions, • Experience with VMWare compute, storage, and network configurations, • Experience with on-prem, hybrid and cloud environments supporting kubernetes environments *Resumes, Cover Letters, and Applications which are generated by AI will not be considered for employment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Benefits SciTec offers a highly competitive salary and benefits package, including: • 3% Fully Vested Company 401K Contribution (no employee contribution required), • 100% company paid HSA Medical insurance, with a choice of 2 buy-up options, • 80% company paid Dental insurance, • 100% company paid Vision insurance, • 100% company paid Life insurance, • 100% company paid Long-term Disability insurance, • Short-term Disability insurance, • Annual Profit-Sharing Plan, • Discretionary Performance Bonus, • Paid Parental Leave, • Generous Paid Time Off, including Holiday, Vacation, and Sick Pay SciTec is proud to be an Equal Opportunity employer. VET/Disabled. #ND123

Job DescriptionDescription: Is your passion designing complex power systems? Do you enjoy working with clients and team members to solve problems? Swanson Rink has over 50 years of expertise in Data center engineering, and we are continuing to grow our team. Swanson Rink’s Senior Electrical Engineer’s partner with our clients and team members to execute highly technical mission critical projects. This position is the technical lead for specific clients including hyperscale, colocation and enterprise. At Swanson Rink, our engineers are supported by specific Project Management and BIM staff allowing our engineers for focus specifically on developing engineering solutions for our clients. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Stock purchase plan, • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: • Be the technical lead for the electrical engineering and design of high-tech facilities, including new data centers, facility expansions, and system upgrades., • Create power design for complex electrical systems including UPS and generator support systems., • Have expertise in power distribution, grounding, standby power, uninterruptible power, and related systems., • Possess proficiency in the development of electrical one-lines, specifications, calculations, studies, and software-based systems analysis., • Have a strong understanding of building systems and inter-discipline coordination., • Be comfortable leading, mentoring, and delegating portions of design work to project engineers, designers, and BIM/CAD staff. Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university., • Registration as a Professional Engineer., • This position requires a strong understanding of the mission critical industry and the nuances of renovation and greenfield construction projects., • Experience designing of medium voltage, power monitoring, lighting, and lighting controls systems a plus., • Must be available to travel occasionally., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts., • Must be authorized to work in the United States. Salary range of $140,000 - $160,000+ and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job Description • Qualis LLC is seeking highly qualified Space Systems Test Engineer with demonstrated qualifications and proven experience in Space Systems to include OPIR, MILSATCOM, Global Positioning System, and Joint Space Operations Center Mission Systems. These positions will assist with test design, planning, execution data analysis/system characterization and associated reporting for operational test and evaluation. This position will also serve as the project manager and site team lead for Qualis. This position will be filled at Buckley Space Force Base, CO. Essential Duties: • Perform analysis of the system, • Perform analysis of test capabilities, • Identify test capability requirements, • Identify test capability shortfalls, • Develop methodologies and tools, • Identify mission critical functions and equipment, • Estimate potential impacts of threats upon functions and equipment, • Design tests using Design of Experiments (DOE), • Identify potential mission impacts, • Review, analyze and report to test director status of Systems Program Office (SPO), and developmental contractor’s systems documentation, • Analyze subsystem’s technology readiness levels, • Assist in translating user requirements into program/system requirements, • Identify the System Program Office's (SPO) plans for Developmental Test (DT), • Identify deficiencies in DT plans and data requirements that must be addressed in OT, • Identify OT data that can be collected during DT events (Integrated Testing), • Identify appropriate test tools and methods required to conduct OT, • Participate in and represent OT interests during Integrated Testing, • Participate in dedicated OT events, • Analyze, characterize system performance and report results of OT and IT&E events, • Coordinate cross-functional teams to ensure timely and effect project execution, • Resource management, monitoring team performance, and timelines Required Qualifications: • Must have minimum of 10 years experience in space systems, missile warning, satellite communications, global positioning system, space situational awareness, or overhead persistent infrared systems is desired., • Position requires practical application of:, • Satellite operations, specifically how these operations may impact operational testing, • Various space systems, as operator will be utilized as subject matter expert, • Must exemplify a dedication to achieving the mission of the customer as well as high standards of quality and excellence in performing the duties., • Must be able to work in a fast paced environment while being able to prioritize work to balance multiple projects and deadlines, • Must have the ability to quickly understand the customers’ overall technical objectives and mission and provide effective solutions., • Must have excellent verbal and written communication skills along with customer interaction and presentation capabilities., • Must be able to work effectively alone, unsupervised, or within a group., • U.S. Citizenship required., • Must have an active Top Secret security clearance and have SCI eligibility. Desired Qualifications: • Background in operational testing highly desired. Qualis LLC is committed to hiring and retaining a diverse and talented workforce who can contribute to the mission and vision of the Company. Our employees are our greatest asset and we promote a positive work environment, teamwork, professional growth, innovation, community involvement, flexible scheduling and a family-friendly work environment. Equal Opportunity Employer/M/F/Vet/Disabled and a Participant in E-Verify

Job Description As a QA Automation Engineer, you will play a key role in ensuring the quality, performance, and reliability of our software solutions—focusing on insurance platforms and shared services applications that support policy administration, underwriting, billing, and claims processing. In this role, you will design, develop, and execute comprehensive automated test suites, contributing directly to the delivery of scalable, secure, and multi-tenant systems that meet both functional and business requirements. You will collaborate closely with developers, Business Analysts, QA team members, product owners, and business stakeholders, utilizing modern tools and best practices to drive high test coverage, enable continuous feedback, and detect defects early in the software development lifecycle. Accountabilities: • Design, build, and maintain scalable automated test scripts across web UI, APIs, and backend components using tools such as Selenium, Cypress, Playwright, Postman, RestAssured, etc., • Develop and maintain modular, data-driven, and reusable test automation frameworks supporting regression, smoke, and end-to-end testing in CI/CD environments., • Integrate automated test suites into CI/CD pipelines using tools like GitHub Actions, Jenkins, Azure DevOps, or GitLab CI, enabling fast feedback and zero-touch deployments., • Implement test data automation and service virtualization to enable robust testing in distributed microservices environments., • Perform API testing and contract validation using tools like Postman, Swagger, ReadyAPI, or Karate., • Define and execute performance, scalability, and load testing using JMeter, Gatling, or k6 where applicable., • Contribute to observability of test executions using test reporting and logging platforms (e.g., Allure, Extent Reports, Grafana)., • Identify, log, and triage defects in systems like Jira, and work closely with development teams on root cause analysis and resolution., • Participate in Agile/Scrum ceremonies, offering feedback and ensuring testing is aligned with the Definition of Done., • Champion automation best practices and contribute to test governance, quality metrics, and process improvement., • Ensure all testing practices meet internal security, privacy, and regulatory standards (e.g., PCI, SOC 2, HIPAA where applicable)., • Stay current with the latest QA automation tools, technologies, and frameworks, and proactively introduce innovation. Qualifications: • Bachelor’s degree in Computer Science, Engineering, Information Technology, or a related field, or equivalent work experience., • Relevant certifications (e.g., ISTQB Advanced, Selenium CP-SAT, Postman API Certification, Agile Tester, AWS DevOps Engineer) are a plus., • 7+ years of experience in test automation or software QA with a strong understanding of testing principles and SDLC., • Demonstrated experience with:, • Web UI Automation (Selenium, Cypress, Playwright), • API Testing (Postman, Ready, REST-assured, Karate), • CI/CD Integration (GitHub Actions, Jenkins, Azure DevOps), • Version Control Systems (Git, Bitbucket), • Infrastructure-as-Code awareness (Terraform basics in testing environments), • Containerized environments (Docker, Kubernetes exposure), • Monitoring and log analysis tools for testing observability (e.g., Kibana, Datadog, Splunk), • Experience with test case management tools (e.g., TestRail, Zephyr) and defect tracking systems (e.g., Jira)., • Familiarity with DevOps, modular architecture, and Agile software development practices., • Prior experience in Property & Casualty Insurance, including multi-product insurance platforms across personal and commercial lines, is strongly preferred. Benefits: We are proud to offer a robust benefits suite that includes: • Competitive base salary plus incentive plans for eligible team members, • 401(K) retirement plan that includes a company match of up to 6% of your eligible salary, • Free basic life and AD&D, long-term disability and short-term disability insurance, • Medical, dental and vision plans to meet your unique healthcare needs, • Wellness incentives, • Generous time off program that includes personal, holiday and volunteer paid time off, • Flexible work schedules and hybrid/remote options for eligible positions, • Educational assistance #TMG

Job Description About Ping Identity: At Ping Identity, we believe in making digital experiences both secure and seamless for all users, without compromise. We call this digital freedom. And it's not just something we provide our customers. It's something that inspires our company. People don't come here to join a culture that's built on digital freedom. They come to cultivate it. Our intelligent, cloud identity platform lets people shop, work, bank, and interact wherever and however they want. Without friction. Without fear. While protecting digital identities is at the core of our technology, protecting individual identities is at the core of our culture. We champion every identity. One of our core values, Respect Individuality, reminds us to celebrate differences so you are empowered to bring your authentic self to work. We're headquartered in Denver, Colorado and we have offices and employees around the globe. We serve the largest, most demanding enterprises worldwide, including more than half of the Fortune 100. At Ping Identity, we're changing the way people and businesses think about cybersecurity, digital experiences, and identity and access management. Ping Identity is seeking a creative and technically curious AI Automation Engineer to join the Data & AI team within the Office of the CIO. This is a unique opportunity to shape how Ping leverages agentic AI and intelligent automation to drive enterprise transformation. As an AI Automation Engineer within Ping Identity's Office of the CIO, you'll play a key role in shaping and building our enterprise AI strategy. You'll work closely with stakeholders from business, IT, engineering, and data teams to gather use cases, translate them into future-state process designs, and design, build, and deliver intelligent agents that augment workflows and drive enterprise efficiency. This role is ideal for someone who thrives at the intersection of process optimization, intelligent automation, and enterprise enablement. You'll partner with data engineers, architects, and platform administrators to shape how off-the-shelf and custom-built AI agents coexist and scale across the business. You'll help define where AI can add value, how agentic platforms are governed, and how we responsibly deploy automation to drive impact. You will: • Lead discussions with stakeholders across business operations, IT, engineering, and data teams to gather and clarify requirements, processes, and solution designs., • Help identify and prioritize high-impact business use cases where agentic AI can augment or automate workflows., • Translate use cases into future-state process diagrams and conceptual architectures that illustrate how intelligent automation will be delivered., • Design and configure intelligent agents to automate business processes using modern orchestration platforms (no-code or low-code)., • Manage intake and prioritization of automation use cases from multiple business units., • Partner with data engineers, architects, and platform teams to align enterprise AI platforms with bespoke agent implementations., • Support business stakeholders through AI adoption and change management, including direct collaboration when building and configuring intelligent agents., • Facilitate demonstrations, user acceptance testing, and change adoption activities related to agent releases and enhancements., • 3–5 years of experience in roles such as RPA Developer, Platform Administrator, Integration Specialist, Data Engineer, or similar positions focused on process automation or enterprise systems., • Demonstrated ability to translate business needs into solution workflows — including process mapping, future-state design, and operational requirements., • Familiarity with AI-driven automation tools, including orchestration platforms (low-code/no-code or custom frameworks)., • Strong communication skills, with confidence navigating both technical teams and business stakeholders., • Hands-on experience delivering enterprise process automation or digital transformation projects from ideation through deployment., • You have contributed to production-grade automation initiatives that incorporate AI agents, retrieval-augmented generation (RAG), or orchestration layers., • You have written and tested prompts or workflows used in enterprise AI automation., • You have worked on or alongside technical teams deploying intelligent or autonomous systems., • You have translated business use cases into future-state process diagrams or conceptual architectures. Life at Ping: We believe in and facilitate a flexible, collaborative work environment. We're growing quickly, but remain true to the innovative, can-do startup values that got us here. Most importantly, we keep hiring talented, smart, fun, and genuinely nice people because that's who we want to succeed with every day. Here are just a few of the things that make Ping special: • A company culture that empowers you to do your best work., • Employee Resource Groups that create a sense of belonging for everyone., • Regular company and team bonding events., • Competitive benefits and perks., • Generous PTO & Holiday Schedule, • Parental Leave, • Progressive Healthcare Options, • Retirement Programs, • Opportunity for Education Reimbursement We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Job Description • LOCATION: Union Station, Downtown Denver, • SCHEDULE: Monday - Friday: 8:00 am - 5:00 pm | On call 24/7, • SALARY: $85,000 - $90,000 per year ABOUT US Worth Ross Management Company is an award-winning industry leader, and a team of extraordinary people. We have the advantage of recruiting and retaining the best talent in the HOA management industry. Diversity and inclusion are the only paths that allows forward progress and our success as a company stems from that philosophy. ABOUT THE ROLE Under the direct supervision of the General Manager, the Engineer will be responsible for delivering and maintaining all facilities of a residential high-rise building. General expectation is that this role maintains and preserves the life of all common area equipment, inclusive of both the interior and exterior of the building and complies with all City, County, State, OSHA, and all governmental agency mandates. WHAT YOU'LL DO • Engineering management of a residential facility; including common areas, amenity space and parking garage., • Provide quarterly cost analysis and cost projections for all utilities, chilled water, electrical, gas and on all maintenance items needed, filters, belts, valves, and maintenance equipment., • Efficiency analysis and energy savings audits done on a quarterly basis., • Create, execute, and maintain an automated preventative maintenance program to include all components of the building., • Implement and maintain all required maintenance SOPs as directed by GM and VP of Risk Management., • Maintain any “green energy” qualifications of the building., • Coordinate, maintain, and keep current all building component inspections., • Supervises full maintenance team and any other departments as assigned by the GM. Develops training to ensure excellence in job performance., • Building and maintaining strong relationships with outside vendors., • Coordinate contracted services and repairs, alongside the GM., • Keeps complete and accurate records of all maintenance requests submitted, commented on, and completed., • Must be available for “on-call” after hours, weekends, and holidays and available for emergencies, as needed. EDUCATION/EXPERIENCE High school diploma or equivalent WHAT YOU NEED TO SUCCEED • A minimum of 7-10 years of engineering experience, preferably in high-rise facilities., • Should have a specific knowledge of all high-rise electrical, plumbing, stair pressurization, elevators, and mechanical systems., • Safety systems knowledge, • Knowledge of annual inspections, specifically City of Austin requirements, • Elevator systems knowledge, • Fire pump and safety system knowledge, • Trash room / compactor knowledge, • Some experience with Building Link and Vantaca building management software., • Medical, • Dental, • Vision, • Short term disability (STD), • Long term disability (LTD), • Employee assistance program (EAP), • Identity theft protection, • Pet insurance, • Retirement, • Paid Time Off (PTO)

Job Description The Process Engineer I will be part of our cross-functional team that continuously seeks to develop, improve, design and implement processes that meet or exceed our delivery, quality and cost expectations. Responsibilities: • Research and develop new processes and technologies encompassing safety, cost, quality, productivity and risk mitigation, • Provide mentoring and technical leadership to production and other design/manufacturing teams regarding daily quality, implementation of countermeasures, implementation of corrective action efforts and continuous improvement, • Work cross-functionally within other departments within STAQ to establish standards, education and training for: material selection; process optimization and scale-up; new process implementation; equipment sourcing, qualification and implementation; generation of SOPs, work instructions, protocols, batch records, and other technical documents, • Assist with equipment qualification - generation, execution, and review of protocols, • Work with external vendors to source new materials and equipment to support new processes and ongoing operational improvements, • Help facilitate engineering and development of new products, new lines of business, and new production methods as needed, • Perform other duties as assigned to meet business needs, • Maintains currency with applicable regulatory and guidance documents Qualifications and Education Requirements: • Four-year degree in engineering or related field required, • Minimum of 2 years' experience in process development or process engineering within a cGMP environment Preferred Skills: • Strong mechanical aptitude and problem-solving skills, • Strong organizational skills with demonstrated ability to drive projects from conception to completion, including validation testing and budget management, • Experience with equipment qualification and/or process validation, • Demonstrate strong attention to detail and disciplined problem-solving skills, including sound statistical analysis and process control methodology, • Effective leadership capabilities when working with production team, • Ability to maintain good working relationships with co-workers and other employees at all levels of the organization, • Effective at managing multiple priorities under tight deadlines, • Strong verbal and written communication skills

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a highly experienced and technically proficient Mechanical Engineer IV to lead the design and engineering of HVAC and mechanical utility systems across complex, multidisciplinary projects. This role is responsible for managing the mechanical discipline scope, budget, and schedule through all phases of project delivery—from site selection and master planning to commissioning and startup. The Mechanical Engineer IV will serve as a technical leader and mentor, overseeing the work of junior and senior engineers and designers. This position requires deep knowledge of mechanical systems, strong coordination skills, and the ability to interface with clients, architects, engineers, construction managers, vendors, and trade partners. Depending on the project, this role may serve as the Lead Mechanical Engineer or Senior Mechanical Engineer, with responsibilities tailored accordingly. Key Responsibilities • Lead the mechanical discipline on projects of varying size and complexity, managing scope, budget, and schedule., • Act as Engineer-of-Record and direct the work of mechanical engineering and design staff., • Develop and review technical documentation including:, • Load calculations, utility assessments, and energy modeling, • Design reports, code evaluations, and equipment specifications, • P&IDs, plans, schedules, and installation details, • Coordinate with internal and external stakeholders to ensure a fully integrated and constructible design., • Conduct and lead field surveys, identify non-compliant conditions, and support field reporting., • Provide advanced support during construction, including RFI responses, submittal reviews, punch list development, and progress reporting., • Drive quality assurance through document reviews and technical verification., • Mentor and train less experienced engineers and designers., • Lead system design programming and master planning efforts., • Support proposal development, task planning, and project scheduling in collaboration with Project Managers.Qualifications Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or Architectural Engineering (mechanical focus) from an ABET-accredited program., • PE (Professional Engineer) license in good standing., • Minimum of 10 years of experience for Lead Mechanical Engineer roles., • Minimum of 15 years of experience for Senior Mechanical Engineer roles., • Advanced experience in HVAC, mechanical utility, and piping system design and implementation., • Experience in life sciences (pharmaceutical, biotech, laboratory) or food & beverage industries., • Advanced knowledge of GMP manufacturing environments., • Proficiency in Revit, AutoCAD, and Microsoft Office Suite., • LEED, WELL, or other sustainable design credentials or experience., • Familiarity with industry standards such as ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, and OSHA., • Advanced experience in plumbing design and field survey leadership., • Experience using Revit plugins (e.g., Enscape, Unifi) and parametric tools (e.g., Dynamo, Grasshopper, Rhino)., • Strong coordination skills with cross-discipline teams, vendors, and construction partners., • Intermediate experience troubleshooting mechanical systems., • Ability to develop and deliver internal training presentations. #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Northstrat is seeking an experienced Digital Engineering Modeler to join our dynamic prototype solution team. The Digital Engineering Modeler will support the agile development of modern software solutions that support the future Enterprise Systems Integration of space-to-ground systems for the National Customer. The ideal candidate will have extensive experience in applying model-based systems engineering best practices to create system structure and behavior diagrams, identify user and mission needs into software features for implementation, and document/manage the system architecture. This role demands a self-starter who can take loosely defined tasks and support the development team to deliver high-quality solutions. Key Responsibilities • Develop Requirements, Block, Use Case, and Activity diagrams in collaboration with Mission Design Team as features and capabilities are defined, designed, and implemented., • Collaborate with Mission Design Team to provide feedback and suggest recommendations on improvements to the Government provided models., • Review and interpret Government provided models to ensure consistency and traceability throughout the system models, • Support the design, development, and implementation of robust, scalable, and high-performance software applications, • Support and participate in agile ceremonies throughout software development lifecycle., • Support the entire product lifecycle, including but not limited to systems engineering documentation, requirements analysis, design, implementation, integration, test, deployment. Requirements • Active or current Top-Secret clearance with SCI access and polygraph (TS/SCI with poly)., • 100% on-site, in-person work performance., • Bachelor’s degree in STEM or a related field, or equivalent experience., • Experience: 5+ years of relevant experience to job summary and key responsibilities., • Experience with Model Based Systems Engineering (MBSE) tools such as Cameo Systems Modeler, • Experience with space-to-ground systems, architecture, and interfaces., • Experience with Command and Control (C2) and/or Mission Management (MM) software for space systems. Preferred Qualifications • Experience with testing software applications (interface, functional, front-end, back-end)., • Experience using Atlassian products including Jira, Confluence, Zephyr., • Experience in collaborating and interacting with geographically disperse teammates and stakeholders., • Experience with or understanding of Intelligence Community (IC) processes, policies, and guidance., • Familiarity with Customer’s Enterprise Framework for deploying and delivering software and mission capabilities to the Product Baseline (Operational Baseline)., • Familiarity of agile software development practices (scrum and/or Kanban)., • Knowledge of Continuous Integration/Continuous Deployment (CI/CD) pipelines., • Privileged User eligible (Security+ Certification or Customer accepted equivalent) Work/Life Balance Northstrat values true work life balance. We offer power of choice benefits designed to best meet the needs of you and your lifestyle. Our benefits programs are designed to support and encourage wellness, healthy living, retirement investment, and lifetime learning. Pay Range There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. We also offer competitive compensation, benefits, and professional development opportunities. Please refer to our Benefits section for additional details. Flex Time Northstrat does not mandate specific working hours. Although project requirements may dictate schedules, a Northstrat employee is only required to work an average of 8 hours per weekday over the course of a month. For example: John worked 12 hours on June 1st to meet a project deadline. On June 15th, John only worked 4 hours because he left early for a long weekend. John’s IBA was not debited for time off because flex time allowed him to carry over those 4 hours from June 1st. Individual Benefits Account (IBA) To attract and retain the highest quality staff, Northstrat provides a unique and versatile benefits package, the Individual Benefit Account (IBA), which places the power of choice in the hands of our greatest asset – the employee. The purpose of the IBA is to provide attractive benefits to all full-time employees of Northstrat on a flexible basis that enables each covered employee to select a package that best suits his or her needs. Whether those needs are paid time off, medical expenses, prescription drug expenses, cash disbursement, or a combination of any of these, the IBA provides flexibility to help you meet your specific goals. The IBA can be used for such things as: IBA Benefits accrue each month in the amount equivalent to 50% of the employee’s monthly compensation rate. That is, the effective dollar amount of this accrual is in addition to an employee’s salary. Profit Sharing Plan (PSP) The PSP is a qualified retirement plan that Northstrat funds quarterly on the employee’s behalf through the IBA in the amount equivalent to 25% (up to the IRS contribution limit) of the employee’s compensation. That is, of the 50% accrual in the IBA, half of the amount accrued is applied to the PSP. Stock Options Because Northstrat is an employee-owned company, all new employees are offered stock options. Employees have the opportunity to receive additional stock options based on accomplishment of individual performance goals. Stock owners elect the Board of Directors and are directly impacted by the success of the company. Lifelong Learning Our culture promotes and nurtures a growth environment. We hire and scale rapidly to meet the needs of our partner customers. Through periodic company sponsored training events, and the ability to use IBA funds for reimbursement of work-related education expenses you will have the opportunity to continually grow your skills and abilities. Join Our Talented Team We hire the BEST employees and value each one. Since 2021, The Washington Post has recognized Northstrat among its "Top Workplaces". We think that your friends and family will like it here too, so we offer employee referral incentives. Northstrat is an Equal Opportunity Employer We are committed to fostering an inclusive, diverse workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, disability, veteran status or other legally protected status.

Job DescriptionAbout Sparkfund Sparkfund is the deployment services company utilities rely on to take DERs from grid edge to grid core. With over a decade of experience as a utility services company, Sparkfund has pioneered a smarter approach to deploying distributed assets as part of a fast-growing grid. Through its Distributed Capacity Procurement (DCP) model, Sparkfund enables utilities to plan, deploy, and dispatch DERs at the scale and pace necessary to meet load growth demand and unlock the full value of the grid. We support program design, assessment of DER grid value, host engagement, and value chain management to ensure on-time, on-budget deployment of distributed resources with maximum grid value and lowest cost. With more than 3,500 projects deployed across 43 states and more than 300MW of energized assets constructed, Sparkfund is transforming buildings into a valuable extension of the grid for the benefit of our society. Position Summary As the Controls and Commissioning Engineer, you will serve as our senior expert for all SCADA, controls, and plant communications systems. You will play a pivotal, hands-on role in our deployment model by leading the integration and testing of BESS assets at our central integration and commissioning center. Your expertise is critical to de-risking projects before they reach the field, ensuring every system we deploy is fully functional, cybersecure, and integrates seamlessly with our utility partners' control platforms (DERMS/ADMS). Location While Sparkfund is a remote-first company, with a digital workplace built around emerging hub-offices, this role is required to be in/around our Denver, Minneapolis, and Washington, DC hubs area. Candidates must be within commuting distance, or open to relocating, to be considered for this role. Company subsidized relocation is available for this role and will be covered by the recruiter. Key Responsibilities • Technical Leadership: Serve as the senior subject matter expert for all SCADA and plant controls systems, including equipment, network architecture, data interfaces, and cybersecurity., • System Integration: Lead technical communications with utility system operators and planners to define requirements for BESS controls, commissioning, and DERMS integration., • Testing and Validation: Develop and execute detailed Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) plans. Standardize testing protocols for our integration center to simulate utility dispatch signals and validate system performance, including full functional and alarm testing., • Design and Specification: Develop detailed design specifications for controls and communications architecture based on project agreements and regulatory requirements (ISO, NERC)., • Field Support: Oversee on-site commissioning activities, act as the highest tier of support for troubleshooting complex controls issues, and ensure all systems meet design specifications before handoff., • Continuous Improvement: Analyze performance data to baseline and improve control algorithms and equipment performance. Stay current with industry innovations to enhance plant reliability.Preferred Skills & Qualifications, • Bachelor's or Master's degree in Electrical Engineering, Mechanical Engineering, or a related technical field., • 5+ years of BESS or power generation controls experience, including project work across the design, implementation, and commissioning phases of multiple projects., • Utility-scale Power Generation controls experience is highly desired., • Demonstrated technical proficiency with battery energy storage systems on commercial and/or industrial-scale projects with front-of-meter interconnections., • Experience with BESS dispatch and monitoring communication systems, including utility SCADA, ADMS, and/or DERMS., • Understanding of network security protocols and cybersecurity standards., • Experience with the integration of Energy Storage Systems with utility controls systems., • Thorough understanding or the ability to rapidly gain an applications-based understanding of BESS-specific codes and safety standards such as NFPA 855, IEEE 1547, UL 1741, and UL 9540., • Experience modeling energy storage systems dispatch and operation in HOMER, Xendee, or similar software tools., • Past experience working as an electrical engineer at a consulting engineering company performing detailed electrical power engineering analysis., • Competitive compensation and stock option plans - we believe in shared ownership., • The anticipated salary range for this position is between $100,000 - $130,000 per year., • Comprehensive benefits package including medical, vision, and dental insurance as well as disability and life insurance., • Flexible vacation policy encouraging strong work life balance and paid time away. We also observe all federal holidays., • Alternating 4 day weeks, with every other Friday off., • 12 weeks gender-neutral paid leave for caregivers when they have a new addition to their families and an additional 4 weeks of paid leave for birthing parents., • A one-time, work-from-home stipend to help cover any equipment, hardware, etc. you need to set up your remote office., • A monthly allowance of $100 to help cover phone and WiFi expenses.We Want You To KnowYou can be a great candidate even if you don't fit everything we've described above. You can also have important skills we haven't thought of. If that's you, don't hesitate to apply and tell us about yourself. We are dedicated to environmental stewardship, and recognize we need diverse perspectives to successfully tackle this massive challenge. To change the world, we must first change ourselves, which is why Sparkfund has created a space that sources viewpoints from people who look and think differently.We are committed to diversity and building an equitable and inclusive environment for people of all backgrounds and experiences, and we're taking steps to meet that commitment. Sparkfund is an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Sparkfund will consider for employment qualified applicants with arrest and conviction records consistent with federal, state, and local legal requirements.

Job Description We’re looking for a seasoned Senior Security Engineer with 5–10 years of hands-on experience in cybersecurity, with a strong focus on AWS cloud environments. This role demands a deep command of security architecture, cloud infrastructure, and sophisticated threat detection and response techniques. As a key member of our team, you’ll spearhead efforts to strengthen our security posture, drive strategic initiatives, and serve as a trusted mentor to junior engineers. You’ll work cross-functionally to safeguard our digital assets, ensuring our systems remain resilient, compliant, and ahead of emerging threats. Accountabilities: • Lead the design, implementation, and management of advanced endpoint protection, detection, and response tools., • Apply the MITRE ATT&CK framework to proactively identify and mitigate attack techniques., • Architect and oversee IAM security strategies including user permissions, role-based access control, and auditing across AWS and other cloud platforms., • Analyze and respond to complex security events using SIEM tools, providing expert-level insights., • Drive AWS cloud security initiatives, including configuration reviews, compliance checks, and threat modeling., • Implement and manage enterprise-level SSO and MFA solutions., • Develop and maintain scripts to automate security operations and incident response processes., • Optimize email security configurations, including Microsoft Defender and other advanced threat protection tools., • Lead end-user security awareness programs and training initiatives., • Manage Active Directory domain security, Group Policy, and integration with cloud identity providers., • Oversee DNS and certificate management with a focus on secure configurations., • Design and monitor firewall rules and network segmentation strategies., • Collaborate with stakeholders to align security strategies with business objectives., • Take ownership of complex security projects and work independently with minimal supervision., • Mentor junior security staff and foster a culture of continuous learning and improvement. Qualifications: • Bachelor’s or Master’s degree in Information Technology, Cybersecurity, or a related field, or equivalent work experience., • 5–10 years of experience in cybersecurity roles with a focus on cloud security., • Expertise in AWS cloud security including IAM, VPC, security groups, and compliance frameworks., • Proficiency with endpoint protection and SIEM tools., • Hands-on experience with Entra, Okta, Active Directory, and Group Policy., • Advanced scripting skills in PowerShell, Python, or similar languages., • Strong leadership, communication, and collaboration skills., • Proven ability to manage complex security projects and mentor team members., • Continuous learning mindset with a track record of adopting new technologies and practices. Compensation: $115,000 - $145,000 commensurate with experience, plus bonus eligibility Benefits: We are proud to offer a robust benefits suite that includes: • Competitive base salary plus incentive plans for eligible team members, • 401(K) retirement plan that includes a company match of up to 6% of your eligible salary, • Free basic life and AD&D, long-term disability and short-term disability insurance, • Medical, dental and vision plans to meet your unique healthcare needs, • Wellness incentives, • Generous time off program that includes personal, holiday and volunteer paid time off, • Flexible work schedules and hybrid/remote options for eligible positions, • Educational assistance #TMG

Job Description Electrical Engineer III-Power Systems Location: Denver, CO - Hybrid Work Schedule CLP Engineering (CLPE) CLPE is seeking talented Electrical Engineers with power systems background and 5+ years' experience to join us. Due to the nature of our work as a Federal Contractor, candidates must be a US Citizen. CLPE is a full-service electric utility solutions engineering firm in Denver with more than twenty years’ experience in electrical utility system ownership, upgrades, maintenance and operations through our sister company, City Light & Power. CLPE offers a wide range of power system engineering services to investor-owned, municipal, cooperative, government, industrial, and commercial customers. City Light & Power/CLP Engineering has been recognized by The Denver Post as one of the top workplaces for 2025! Duties & Responsibilities: • Assist in designing sub-transmission systems, substations, switching stations, and commercial/industrial power distribution system., • Develop concept design alternatives, engineering calculations, analysis, and engineering estimates for small-scale system improvement projects for substations and distribution systems., • Create, update, and maintain GIS database for large-scale electrical distribution systems, • Perform site surveys for new utility service requests, develop concept design alternatives and present the alternatives to CLPE management and the customer., • Assist Lead Engineers with major capital upgrade projects., • Analyze electrical fault events, power quality issues, system loading scenarios and assist with implementing corrective actions., • Gain and maintain intermediate knowledge of power system protection and relaying schemes for electrical distribution system., • Create system model for large-scale power system in ETAP (or similar software) and perform various power system analysis/studies. Qualifications & Skills: • BS degree, Electrical Engineering, from an accredited university. Power systems emphasis preferred., • Familiar with power system analysis, distribution system modeling, and protective device coordination, • Five-eight (5-8) years' related engineering work experience, • Experience with medium voltage electrical substations and distribution system, • Experience with ETAP or similar software., • You must be a U.S. citizen., • You will be required to obtain Military Base Security Access Clearance., • We offer an excellent benefits package that includes medical insurance, dental insurance, life insurance, 401k with company contribution, paid time off and paid holidays., • Salary range: $100,000-$135,000/year based on experience plus eligible to participate in Short Term Incentive Plan. We are proud to be an EEO/AA employer M/F/Disabled/Veterans. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job DescriptionJob Description Controls Engineer - Denver, Colorado - Hybrid Company Overview ENERGYneering Solutions (ESI), a TransTech Energy Company, provides exceptional technical expertise in engineering and operations for both the renewable and traditional energy industries. Since 2007, ESI has specialized in the design, construction, and operations of biogas projects, collectively producing over one million MWh of renewable electricity and more than 50 million gallons of renewable vehicle fuel annually. Headquartered in scenic Central Oregon, at the foot of the Cascade Mountain Range, ESI embraces the region's quality of life and encourages a healthy, active lifestyle for its employees, aligning with its core principle of unmatched experience, flexibility, and follow-through for its clients. Job Overview The Controls Engineer works closely with project engineers, project managers, and ESI’s O&M teams to provide industrial control system design for the company’s ongoing biogas utilization projects. The position requires implementing sound engineering principles to ensure project designs are at the industry’s cutting edge. An ability to work independently, self-motivate, and communicate effectively with team members is of the utmost importance to this position. Reports To The Controls Engineer reports to the Lead Controls Engineer as a member of the Instrumentation and Controls group. Location Hybrid Remote/Office based out of the Denver, CO Office Full remote option available for Senior Controls Engineers with at least 10+ year experience. Responsibilities and Duties • Design and review control system documentation including Process Flow Diagrams (PFDs), equipment and instrumentation specifications, data sheets, Piping and Instrumentation Diagrams (P&IDs), control narratives, I/O list, electrical drawings, and operation manuals., • Specify measurement and analysis instrumentation and control components for automated industrial process control and plant safety., • PLC programming and SCADA design., • Prepare and review UL panel drawings for fabrication., • Participate in project HAZOP studies., • Support the review and response to contractor RFIs., • Support Field Service work with through remote and on-site process troubleshooting and optimization., • Plan and participate in on-site startup and commissioning activities., • Interact with other engineering disciplines and departments throughout the company., • Seek ways to improve and promote quality, demonstrating accuracy and thoroughness in all work., • This is a mid-level position requiring 3+ years of control engineering-related experience in some of or all the following industries: Renewable Energy; RNG - Renewable Natural Gas and Biogas-to-Energy; Gas Processing; Chemical; Power; Waste Management; Environmental Air Quality Control System, Other Industrial Process Automation., • Bachelor’s degree in engineering or a similar technical field from an accredited university., • Working knowledge of ISA, NFPA, UL, safety codes, fire codes, and other industry standards., • Proficiency in process control instrumentation and common data communication protocols including Modbus & HART., • Proficiency in Studio 5000 PLC programming software., • Experience tuning control loops., • Proficient with the Microsoft Office suite of software. (Word, Excel, PowerPoint, etc.), • Excellent verbal and written communication skills., • Proficiency with Rockwell Automation, GE and Automation Direct products and ignition software., • Proficiency in SCADA design., • Proficiency in Gas Analysis., • Proficiency in UL panel design., • E.I.T. certification or ability to obtain certification within 6 months of hire., • Experience in maintenance planning and preventative maintenance strategies., • Advanced optimization, trouble shooting, and/or process design skills in a process simulation package., • Experience in process optimization, troubleshooting, and root cause analysis (RCA) in an energy or manufacturing environment., • Experience with process metrics and reporting key performance indicators (KPI). Ideal Candidate • Excellent verbal and written communication skills. Ability to deal with complex problems and present recommendations and findings in a clear, concise format; ability to interact effectively at all levels within and outside of ESI. Ability to communicate effectively with team members, vendors, contractors, and leadership., • Quick learner who adapts well to a fast-moving environment and gets things done, combines creativity, problem-solving skills, and a can-do attitude to overcome any obstacle., • Free HSA health plan or traditional PPO, • 401(k) with generous company match (Safe Harbor), • Dental, vision, and optional coverage like accident & critical illness insurance, • HSA and FSA accounts to save on healthcare costs, • Company-paid Life, Long Term Disability, and AD&D insurance, • Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program, • Discounts on gyms, shopping & entertainment, • Unlimited Paid Time Off, • Paid Holidays ESI’s core values include pride of ownership, a limitless desire to learn, and a relentless approach to solving any challenge. A successful ESI employee not only embraces these values but knows when to lean on the team for support and guidance. We acknowledge that our fast-paced and dynamic environment is not for everyone, but if you are looking for independence and new challenges, ESI will be a great fit. This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #ESI

Job Description Join EVOTEK: North America’s Premier Digital Business Enabler As North America's premier enabler of secure digital business, we integrate cutting-edge technical expertise across data center, network, security, cloud, and communications domains. By delivering cohesive digital solutions, we help businesses drive measurable impact and accelerate their transformation. Our award-winning culture is the cornerstone of everything we do. Recognized multiple times by Inc. Magazine as a "Best Place to Work", we’re proud to create an environment where innovation and collaboration thrive. Locally, we’ve been honored by The San Diego Business Journal as a "Best Place to Work" more than seven times, and our excellence is reflected in accolades like CRN's "Solution Provider 500", "Tech Elite 250", and "Top 150 Growth Companies”. We’ve also earned a spot among CRN’s "Triple Crown” award winners. If you’re ready to be part of a team that values innovation, culture, and business impact, EVOTEK is the place for you. We are looking for a passionate, innovative, hands-on Platform Architect to help us ensure our industry-leading solutions remain secure, integrate well and scale. As a Platform Architect on our team, you’ll design and implement cloud solutions, provide cloud migration strategies, and modernize mission critical systems. You’ll recommend tools and capabilities based on your research of the current environment and knowledge of various on-premise, cloud based, and hybrid resources. • Translate customer and business processes and requirements into future capabilities and strategies to build cost-effective and well architected solutions., • Provide technical guidance and facilitate a collective understanding of strategy and security for cloud applications and services through the use of mockups, prototypes, and close collaboration for new solution and technology introduction., • Collaborate with business and technology teams to define future states, roadmaps, and create platform architecture that enables business and technology vision and goals., • Develop, maintain, and communicate overall platform architecture and strategy., • Experience with infrastructure-as-code environments, including activities around the automated server or network configurations, large-scale software deployments, or monitoring and testing, such as continuous integration and continuous delivery (CI/CD)., • Strong experience with AWS, Azure and/or GCP implementations, • Implemented data lakes and data warehousing solutions on Azure., • Scripting experience in Bash, PowerShell, Python, Groovy, or Ruby., • DevOps and Agile Methodologies., • Experience with open technologies, DevOps, and related Infrastructure as Code (IaC) tools, including Docker, Kubernetes, OpenShift, Gitlab, Jenkins, GitHub, Terraform, Ansible, or Git., • Experience with multiple, diverse technologies and processing environments., • Knowledge of modern authentication protocols, cybersecurity, and all components of a technical architecture., • Cloud computing technologies business drivers, and emerging computing trends., • Business process re-engineering principles and processes., • Knowledge of SOA, object-oriented analysis and design, or client and server systems., • Ability to provide oversight on major transformation projects and successful transitions to support teams., • Salary commensurate with years’ of experience, technical expertise and geographic location., • Salary range: $150,000 to $200,000., • Performance bonuses., • Benefits package that includes 100% paid medical, dental and vision for the employee., • 401(k) with employer match., • Strong company culture., • Flexible PTO policy., • Flexible working arrangements.

Job DescriptionAbout the Role As a Staff Engineer, you'll own end-to-end features across our backend services (Ruby on Rails or TypeScript/Node) and our Angular/TypeScript front end. You'll work under minimal supervision, troubleshoot complex problems, and help shape our core monolith and emerging TS microservices while collaborating closely with product, design, and QA. You will potentially work with AI enabled tools and services. However you do not need deep data science knowledge. What you'll do • Design, build, and maintain scalable Rails or TypeScript/Node services and RESTful APIs, • Implement and extend Angular/TypeScript UI components for web experiences, • Optimize PostgreSQL queries and service performance, • Collaborate with cross-functional squads to define requirements and deliver features, • Potentially work on ai agents, mcp servers and various AI enabled tools and frameworks, • Identify and drive process, architecture, and toolchain improvements, • Mentor junior engineers through code reviews and pair-programming, • Serve as a technical lead on complex projects, balancing scope, risk, and engineering quality.What does success look like?, • 30 days: Ship a backend feature (Rails or TS) end-to-end and demo it to the team, • 60 days: Lead a cross-team API enhancement and propose a performance or scaling or testability refactor, • 90 days: Lead a system-level architectural improvement (e.g., introduce a TypeScript microservice or refactor a critical service for scalability), including a clear design, implementation, and rollout plan in place or executed against..Who You Are, • 8+ years building web services or full-stack applications, • Strong hands-on experience in Ruby on Rails or TypeScript/Node back ends, • Solid Angular/TypeScript front-end skills, • Deep understanding of REST, PostgreSQL, and performance tuning, • Proven ability to balance short-term delivery with long-term technical investments., • Comfortable operating in a fast-paced, ambiguous environment where requirements evolve., • Excellent problem-solving, communication, and collaboration skills The anticipated salary range for this role will be $160,000 - $180,000 per year. Final compensation will be determined based on a variety of factors, including relevant experience, skills, education, and past performance. In addition to base salary, this position may also be eligible for a variable bonus and equity. As leaders in redesigning behavioral health, we walk the walk with our employees' benefits. We want the experience of working at SonderMind to accelerate people's careers and enrich their lives, so we focus on meeting SonderMinders wherever they are and supporting them in all facets of their lives and work. Our benefits include: • A commitment to fostering flexible hybrid work, • A generous PTO policy with a minimum of three weeks off per year, • Free therapy coverage benefits to ensure our employees have access to the care they need (must be enrolled in our medical plans to participate), • Competitive Medical, Dental, and Vision coverage with plans to meet every need, including HSA ($1,100 company contribution) and FSA options, • Employer-paid short-term, long-term disability, life & AD&D to cover life's unexpected events. Not only that, we also cover the difference in salary for up to seven (7) weeks of short-term disability leave (after the required waiting period) should you need to use it., • Eight weeks of paid Parental Leave (if the parent also qualifies for STD, this benefit is in addition which allows between 8-16 weeks of paid leave), • 401K retirement plan with 100% matching which immediately vests on up to 4% of base salary, • Travel to Denver 1x a year for annual Shift gathering, • Fourteen (14) company holidays, • Company Shutdown between Christmas and New Years SonderMind does not discriminate in employment opportunities or practices based on race, color, creed, sex, gender, gender identity or expression, pregnancy, childbirth or related medical conditions, religion, veteran and military status, marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including genetic information or characteristics), sexual orientation, or any other characteristic protected by applicable federal, state, or local laws.

Job Description Crusoe's mission is to accelerate the abundance of energy and intelligence. We’re crafting the engine that powers a world where people can create ambitiously with AI — without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that’s setting the pace for responsible, transformative cloud infrastructure. About the Role: Crusoe is building the World’s Favorite AI-first Cloud infrastructure company. We’re pioneering vertically integrated, purpose-built AI infrastructure solutions trusted by Fortune 500 companies to power their most advanced AI applications. Crusoe is redefining AI cloud infrastructure, with a mission to align the future of computing with the future of the climate. Our AI platform is recognized as the "gold standard" for reliability and performance. Our data centers are optimized for AI workloads and are powered by clean, renewable energy. Be part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that’s setting the pace for responsible, transformative cloud infrastructure. Crusoe is seeking a highly motivated and experienced Project Manager to join our growing Project Execution team. This role will focus specifically on the power generation aspects of our large-scale data center projects, encompassing electrical, communication, controls, and mechanical systems. You will manage the full lifecycle of projects—including engineering execution, construction, completions, commissioning, and turnover—while ensuring delivery on time, within budget, and to the highest standards of quality and safety. This position requires fundamental knowledge of power generation technologies and a strong background in construction execution and project management methodologies. What You'll Be Working On: * Support the Project Execution team in the execution of power generation projects, from design to turnover to Operations. * Collaborate with internal and external stakeholders, including engineering firms, contractors, and vendors, to ensure project success. * Review contractor/vendor submittals, RFIs, procedures, and other project documentation. * Support the Project/Construction Manager in monitoring budgets and schedules to ensure projects are delivered on time and within budget. * Track construction progress against milestones and monitor change orders. * Identify risks and develop mitigation strategies to maintain schedule and quality. * Monitor contractor workmanship and adherence to specifications. * Support commissioning and testing of plant systems to ensure performance and compliance. * Review commissioning documents for technical and practical acceptance. * Evaluate lift plans, flush plans, purge plans, and other construction execution planning documents for safety and compliance. * Coordinate the issuance and response of RFIs and Field Engineering Directives (FEDs). * Contribute to the development of engineering, construction, and commissioning standards and procedures. * Stay current on technologies and best practices in power generation and construction management. Promote and ensure a safe, collaborative work environment. What You'll Bring to the Team: * Bachelor’s degree in Chemical, Electrical, Civil, Construction, or Mechanical Engineering (or related field). * 3+ years of experience in power generation, hydrocarbon, or similar engineering, preferably on large-scale projects. * EIT or PE preferred. * Understanding of power generation technologies including turbine, diesel, and natural gas generators, as well as renewable energy sources. * Familiarity with relevant industry codes and standards (e.g., ASME, ANSI). * Strong project management skills (budgets, schedules, resources). * Excellent communication and interpersonal skills for collaboration across teams. Experience with site supervision and construction management. * Data center power/mechanical systems experience is a plus. * Ability to travel as needed and perform site-based physical requirements (uneven terrain, climbing ladders/scaffolds/stairs, lifting up to 40 lbs, and exposure to varying weather). * Experience with MS Project, Primavera, or similar scheduling tools. * Certifications such as CPC, PMP, or PMI-CP are recommended for career development in this role. * Must be able to pass a background check. * Participation in Crusoe’s drug and alcohol program is required (safety-sensitive role). Benefits: * Industry competitive pay * Restricted Stock Units in a fast growing, well-funded technology company * Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents * Employer contributions to HSA accounts * Paid Parental Leave * Paid life insurance, short-term and long-term disability * Teladoc * 401(k) with a 100% match up to 4% of salary * Generous paid time off and holiday schedule * Cell phone reimbursement * Tuition reimbursement * Subscription to the Calm app * MetLife Legal * Company paid commuter benefit; $300 per month Compensation Range Compensation will be paid in the range of $149,000 – $180,000. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe Energy is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description FHU is seeking an experienced construction project engineer for our Greenwood Village and Fort Collins offices with strong transportation construction project experience to act as owners’ representatives for our state D.O.T. and local municipal clients on their construction projects. Duties and Responsibilities Primary duties and responsibilities are listed below; other duties may be assigned. • Has the capability work on project sites to serve as Project Engineer in charge of the day-to-day administration of construction projects as an Owner’s representative. May serve as a deputy project manager on larger projects, • Possesses technical competency to understand project design intent and to respond to contractor requests for information resolving project issues promptly, • Provides enforcement of the requirements of construction contracts including conducting inspections of the work and documenting any non-conforming work, • Strong understanding of CDOT construction administration practices as established in the Construction Manual, Local Agency Project Desk Reference and as requested by the client, • Evaluates requests for change orders and negotiates fair and reasonable costs for change orders. Assists with the preparation of change orders, • Controls project documentation to ensure that contract requirements are met, • Reviews and approve concrete mix designs, traffic control plans, shop drawings and submittals, • Assists on design projects by providing construction expertise to our design teams; including: cost estimating, constructability, specification writing and quality control of plans, specification and estimate packages, • Bachelor’s degree in civil engineering or related field from an accredited four-year college, • Minimum of 5 years of progressive experience performing construction phase project management on public works transportation construction projects Application Deadline: 9/15/25 Benefits At FHU we seek to provide a benefits package that helps our team maintain a healthy work-life balance - a concept that is a guiding principle for us. Employees enjoy benefits including: • Medical/RX, HSA, Dental, Vision, Life, and Disability; all of which FHU contributes a significant portion towards or, for some plans, covers 100% of the premiums, • Generous Vacation and Sick leave programs, • 401(k) with employer match and discretionary Profit Sharing, • Adoption Assistance program, • Flexible schedules and options for remote work are available but may not be conducive to every employee and position., • Professional and career development opportunities including tuition reimbursement for continuing education., • Support of employee participation in professional and technical societies & various civic organizations., • Reimbursement of professional certification and registration fees.

Job Description Felsburg Holt & Ullevig (FHU) is seeking a team-oriented, driven, and technically sound water resources engineer looking to advance their career at a firm focused on delivering excellence in transportation! This individual will lead advanced hydraulic modeling and floodplain management efforts across the company that support our transportation focus. This position also includes the opportunity to pursue and manage standalone projects of a similar nature. This individual will have the opportunity to work on a wide range of water resources projects including drainage and floodplain work for transportation projects, wetland and stream restoration projects, and watershed planning and resilience initiatives. This role will include the responsibility of working with our water resources team, providing QA/QC, mentorship, and fostering career growth. Business development and marketing for advanced hydraulic modeling and floodplain management services will also be a part of this role. ESSENTIAL DUTIES and RESPONSIBILITIES include the following. Other duties may be assigned. • Work with leadership within the Great Plains and Mountain West Water Resources Groups to help pursue, manage, and support projects that have a hydraulic modeling and floodplain management element to them., • Assist in business development and marketing efforts for advanced hydraulic studies, floodplain management and other water resource related projects., • Manage independent hydraulic studies and other water resources projects including contracting, scope and fee development, team management, client management, and deliverables, with attention to meeting scope, fee, and schedule., • Perform floodplain analysis, including 1D and 2D hydraulic modeling, to support documentation for floodplain development permit applications, and prepare Conditional Letter of Map Revision and Letter of Map Revision applications to FEMA., • Perform bridge and culvert hydraulic analysis, including sizing proposed structures, analyzing existing structures, scour analysis, and design for scour protection for minor to major outfalls., • Help with the technical development of FHU water resources staff in hydraulic modeling and floodplain management and help provide quality control oversight on projects that have that element to them., • Assist with roadway drainage design including hydrology and hydraulics for projects including roadside ditches, curb and gutter sections, complex storm sewer design with utility conflicts, retrofitting storm sewer design, and coordinating with existing downstream systems., • Assist with wetland and stream restoration assessment, analysis and design. EDUCATION and/or EXPERIENCE • Bachelor’s Degree in Civil Engineering from an accredited four-year college or university with an emphasis in water resources. Master’s degree with an emphasis in water resources is plus., • Experience in AutoCAD Civil3D and/or MicroStation ORD., • Experience and proficiency using GIS for water resources applications., • Experience and proficiency in advanced hydraulic modeling with one or more specialized areas (i.e bridge scour, sediment transport, 2D modeling, etc)., • Experience in drainage design and other water resources related work including hydrology and storm sewer conveyance, water quality facility design, bank stabilization and major structure sizing, etc., • Experience with hydrology and hydraulic modeling software such as HEC-HMS, HEC-RAS 1D/2D, SMS SRH-2D, CulvertMaster, HY8, FlowMaster, StormCAD/SewerGEMS, etc., • Task management experience is required., • Project management experience preferred., • Marketing and business development experience is preferred., • Local experience with DOTs, Counties, and Cities is a plus., • PE License The pay for this position has a range of $100,000 - $145,000 annually. The actual offer will carefully consider a range of factors, including your skills, qualifications, and experience. Application Deadline: 9/15/2025 Benefits At FHU we seek to provide a benefits package that helps our team maintain a healthy work-life balance - a concept that is a guiding principle for us. Employees enjoy benefits including: • Medical/RX, HSA, Dental, Vision, Life, and Disability; all of which FHU contributes a significant portion towards the premiums, • Generous Vacation and Sick leave programs, • 401(k) with employer match and discretionary Profit Sharing, • Adoption Assistance program, • Flexible schedules and options for remote work are available but may not be conducive to every employee and position., • Professional and career development opportunities including tuition reimbursement for continuing education., • Support of employee participation in professional and technical societies & various civic organizations., • Reimbursement of professional certification and registration fees.

Job Description Join EVOTEK: North America’s Premier Digital Business Enabler As North America's premier enabler of secure digital business, we integrate cutting-edge technical expertise across data center, network, security, cloud, and communications domains. By delivering cohesive digital solutions, we help businesses drive measurable impact and accelerate their transformation. Our award-winning culture is the cornerstone of everything we do. Recognized multiple times by Inc. Magazine as a "Best Place to Work", we’re proud to create an environment where innovation and collaboration thrive. Locally, we’ve been honored by The San Diego Business Journal as a "Best Place to Work" more than seven times, and our excellence is reflected in accolades like CRN's "Solution Provider 500", "Tech Elite 250", and "Top 150 Growth Companies”. We’ve also earned a spot among CRN’s "Triple Crown” award winners. If you’re ready to be part of a team that values innovation, culture, and business impact, EVOTEK is the place for you. The Data Center Engineer will be responsible for providing high level technical support and troubleshooting, while working with a team of dynamic professionals who are driven to provide exemplary service delivery to customers and clientele. Requirements • Responsible for helping drive and support service delivery for customers throughout the deployment lifecycle (plan, design, implement, optimize, document)., • Sophisticated troubleshooting abilities consisting of Data Center Services, Switching and Computing support., • Ability to apply analytical skills and technical knowledge to solve product and software problems of moderate to high complexity., • Staging and Implementation of the technologies listed., • Ability to determine root cause and resolution for previously unknown problems and to the customers satisfaction., • Provide project status on a regular basis, while answering customer questions timely and professionally., • Create project deliverables such as requirements documents, cabling details, cutover plans, resiliency test plans, and drawings., • 8-10 + years’ experience demonstrating a significant level of expertise in Storage and Virtualization technologies., • Experience with Storage, Compute, Virtualization, and Hyper-converged abilities., • Must have Cohesity experience, • Experience with Cisco UCS, Nutanix, VMware, • Background with Fibre Channel switching (MDS, Nexus FCoE, Brocade)., • Skilled in Ethernet switching as it pertains to IP storage & hypervisor host connectivity., • Experience with Cisco HyperFlex HX. + include Pure Storage, VMware Horizon View, VMware Site Recovery Manager a plus., • A general understanding of Layer 3 Routing Protocols., • Salary commensurate with years’ of experience, technical expertise and geographic location., • Salary range: $120,000 to $150,000., • Performance bonuses., • Benefits package that includes 100% paid medical, dental and vision for the employee., • 401(k) with employer match., • Strong company culture., • Flexible PTO policy., • Flexible working arrangements. EVOTEK believes that everyone has the ability to make an impact, and we are proud to be an equal opportunity employer committed to providing employment opportunity regardless of sex, race, creed, color, gender, religion, marital status, domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sexual orientation, pregnancy, military or veteran status, citizenship status, and genetic information.

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities We are looking for Senior Field Engineer to join our LTE/5G engineering team. The person will be the key contributor as a subject matter expert in radio frequency (RF) and/or wireless transmission design. Assist in the deployment, optimization and troubleshooting of these networks to resolve a wide range of issues in imaginative as well as practical ways. Use the expertise to work on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Interact across multifunctional groups and with customers driving the ownership of those relationships. ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned: • Support On-Site Field Work, technical work, installations, testing, and troubleshooting of backhaul, transmission methodology., • Install, Integrate and commission Samsung equipment to Samsung standards., • Install, Commission and integrate Cisco CSR/IXR routers to manufacturers and Samsung specifications., • Support troubleshooting of all T-1, ATM backbone, microwave backhaul transmission methodology, • Execute RMA process including field trouble-shooting, replacement and administrative completion. Process may require interfacing with customer, subcontractors and multiple groups within organization., • Report to Regional Field Ops Manager with daily status of activities., • Scheduling and assignment of daily tasks and site work to Field Technicians., • Customer Liaison for Network Operations including Samsung integration into customer processes and design procedures as well as handoff between organizations., • Conduct or assist in all field engineering activities in support of field trials (FIT/FOA/FFA)., • Design and execute RF field test plans for technology features and performance., • Accountable for driving field integration testing efforts (FFA/FIT/FFA) of all 4G/5G key features with customers, including test plan development, reviewing test plan with internal teams, driving cross-functional teams to execution, review of test results, issue identification, analysis and quality proofing., • Ability to manage field engineering walk/drive testing, post-processing, layer-3 signaling analysis, troubleshooting, parameter changes of LTE and 5G NSA and SA systems., • Perform ad-hoc field testing as needed., • Interface with customer and other teams via conference calls and/or in-person field activities., • Perform limited project management to ensure all RF Engineering deliverables are met., • Create or assist with the creation of CIQ., • Develop and review Engineering MOPs., • Able to create/follow/update tickets via Ticketing tools for work assignments, • Interface with software/hardware design groups and provide assistance for their activities of debugging and resolution., • Prepare reports and presentations, compile and analyze data and engineering information for the effective communication of processes, results, plans, recommendations, and conclusion., • Represent Market or Region Field Ops Team in periodic status meetings relative to overall project including daily, weekly and monthly progress by site, market or region., • Support subcontractors in growth of knowledge base for project fulfillment through field training efforts with the objective of expanding engineering expertise., • Review internal documentation for accuracy and provide updates/corrections as appropriate., • Provide direction to field engineers (internal and external) to meet overall project objectives. Goal is to ensure all field engineers are on track to meet project milestones and to redirect as necessary., • Other duties as assigned. SAFETY DUTIES & RESPONSIBILITIES Industry Consensus Standards Circet USA Injury and Illness Prevention Program Manual • Participate in job site safety/hazard analysis Qualifications • Bachelor's Degree in engineering with more than 10 years of directly related experience required, or 15 years of directly related experience with lesser degree., • Field or Network Engineering Experience in Wireless Network Design & Implementation including LTE- 4G/5G, IP, Router/Switching, Core Network Element Installation & Commissioning, Base Station Installation & Commissioning, RF Design and Performance., • Must have strong knowledge and experience with 4G and 5GDeployment, Test, Optimization and Troubleshooting for mmWave and Sub-6 GHz systems as well as their associated parameters., • Experience with UE data collection and post-processing tools, preferably Accuver XCAL and XCAP., • Experience in testing and trialing various 4G/5G features., • Experience with CBRS, Massive-MIMO, and TDD systems is strongly desired., • A solid understanding of RF fundamentals and data network protocols., • Advanced working knowledge of Base Station Vendor equipment (Samsung, Alcatel Lucent, Ericsson)., • Must be able to support presentation of technical information in various business settings to audiences of varying backgrounds., • Proficient in MS Office package., • Experience with GIS and mapping tools is a plus., • Samsung LTE/5G experience is a plus., • CBRS CPI Certification is a plus., • Excellent verbal and written communication skills in English to communicate key technical concepts and the ability to package complex ideas into logical, easy-to-follow progressions., • Successful track record defining direction and providing specific instruction for engineering projects/programs leveraging personal knowledge and organizational skills to increase team efficiency, facilitate personal development and mentor colleagues., • Must have a strong work ethic, excellent communication skills, integrity and work extremely well independently and in a team environment., • Proven ability to manage multiple priorities in a fast-paced environment., • Must have a valid US driver’s license., • Must be able to travel on short notice during the project more than 75% of the time. #ZR Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Job Description The Opportunity As the Substation Project Engineering Manager, you will have the opportunity to: * Lead a multi-discipline team of engineers and technicians * Manage diverse and challenging projects across a portfolio of design services and EPC programs * Oversee design quality, budget, and schedule * Support client interaction, proposals, and business development The Team The business is focused on meeting clients rapidly changing infrastructure needs, with continued investment in renewable energy and sustainable solutions. Joining the team means working at the forefront of delivering innovative energy solutions. Key Responsibilities Project Execution * Prepare complex engineering deliverables for multiple or mega projects * Conduct research to develop equipment and material recommendations * Manage data and perform complex engineering calculations * Develop and manage project budgets, schedules, and quality requirements across multiple disciplines * Lead larger production teams, coordinate multi-discipline activities, and serve as the responsible charge for a project Client Interface * Identify key client interests and drivers for moderately complex projects * Communicate client concerns to project team members and develop solutions * Provide support for business development or pursuit activities * Manage project changes directly with the client under Project Manager supervision Technical Expertise * Lead large multi-discipline teams to meet project deliverables * Provide technical leadership for complex substation projects * Drive solutions to achieve project goals Management Responsibilities * Review lower-level engineering work or assignments * Responsible for hiring, discipline, and pay administration of subordinates Preferred Qualifications * Professional Engineer (PE) license highly preferred * Experience managing Engineering, Procurement, Construction (EPC) or design services substation and switchyard projects for investor-owned utilities in the U.S. * At least five years of substation design experience with strong understanding of project lifecycle, layout design and optimization, relay protection & control, civil/structural design, and major substation equipment * Strong communication skills and ability to build client relationships * Advanced knowledge of engineering design principles, guides, and standards * Working knowledge of procurement processes and contract administration * Familiarity with proposal processes and developing engineering estimates Minimum Qualifications * Bachelors degree in engineering from an accredited program * Minimum of 8 years related work experience * Ability to meet pre-employment onboarding requirements (background check, drug screen, MVR search, as required by law/regulation) Certifications * Professional registration or licensure in home country, or active pursuit of such registration * Additional registrations may be required depending on assignment

Job Description Employment Details: • Recognized Civil Infrastructure Consulting firm in the US & Canada, • 100% employee owned, • Full Benefits: Health, Vision, Dental, and 401K match, • Sign on bonus opporunity, • Perform engineering work in water and wastewater treatment plants and conveyance, • Work on engineering planning and design projects, • Prepare reports, develop plans, and specifications, • Prepare cost estimates for various water and wastewater projects, • Conduct hydraulic modeling, • Permitting and preparation of technical memoranda, reports, and electronic deliverables, • Data entry and analysis, • Provide engineering services during construction, • Bachelor’s degree in civil or environmental Engineering, • Registration as a Professional Engineer or Engineer in Training, • 5 - 10 years of experience in water and wastewater treatment plants (WTP/WWTP) and conveyance, • Experience with large diameter pipelines, • Strong design of Water/Wastewater Conveyance or treatment plants for municipal clients, • Master’s degree in Civil or Environmental Engineering

Job Description Senior Electrical Engineer | Mission Critical HED is looking to add an experienced team member to our group of talented Electrical Engineers. The candidate should have broad electrical engineer expertise, with a focus on mission critical projects. Primary responsibilities will include providing for the design and technical systems for large, complex projects from schematics through construction administration. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Typical Duties • Responsible for building system concepts and documentation process from schematics through construction administration phases within the discipline., • It is expected that the engineer will be in regular coordination with Supervisor in project development and performance., • Electrical Engineer shall have a proficient knowledge of primary sectors of design including:, • Power Distribution, • Lighting and Controls, • Fire Alarm, • Specification writing and editing., • Energy conservation and sustainability/report technical writing., • Function as Project Discipline Team Leader on large, complex projects when assigned., • Responsible for directing and overseeing project team members within their own discipline. Level 4 is responsible for monitoring and executing team compliance with project budget., • Prepare and monitor project status reports., • Coordinate with Electrical Engineering Discipline Leader in preparing project Man-hour Estimates., • Prepare and document required code research for project., • Participate in the development of the project cost model and design to it., • Develop and maintain Electrical Basis of Design Journal throughout the life of the project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other Project Discipline Team Leaders., • Respond to client questions/requests within 24 hours., • Document interpretation and submittal reviews during bidding and construction administration., • Monitor and mentor staff to produce quality architectural and engineering services within a project team concept., • Mentor support engineers to help prepare them for greater project responsibilities., • Provide regular feedback to the Electrical Engineering Discipline Leader on performance of support engineers., • Identify opportunities to improve quality, services, and participate in the implementation., • Participate in in-house training activities., • Participate in related professional organizations and activities., • Contribute to department discussions on field feedback, lessons learned, new technology or developments encountered., • Bachelor's degree and licensure required., • LEED Accredited preferred., • Revit experience, • Minimum six years' experience in A/E industry preferred., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Proficiency in short-circuit and selective coordination calculation. Utilization of EDSA, SKM or other analytical modeling software preferred., • Excellent written/ verbal communication and strong organizational skills., • Possess the ability to motivate, mentor staff, and delegate work assignments., • Computer and CADD/BIM literate., • Very detail-oriented, self-motivated, enthusiastic and flexible., • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes., • Ability to use equipment for communication and documentation purposes., • Visual acuity to perform responsibilities. #LI-DD1

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As a summer 2026 engineering student intern with our Industrial Environmental team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You will work closely with other team members and engineers on client projects related to mine reclamation, industrial water and wastewater treatment, and solid waste management facilities. You'll provide project design utilizing AutoCAD, assist with performing technical analysis, prepare construction documents, perform research, and write technical reports. Depending on the projects, you may also have the opportunity to travel to job sites for field observation. Qualifications You are passionate about: • Working collaboratively with others, • Having ownership in the work you do, • Using your talents to positively affect communities You bring to the team: • Strong communication skills, • Ability to contribute and work well on a team, • Pursuing a degree in civil or environmental engineering, • Working knowledge of AutoCAD, • Proficiency in Microsoft Excel, Word, and Outlook, • Strong attention to detail, • Problem-solving and decision-making skills #LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range$22—$26 USDAdditional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance, • Have the possibility for flexible work arrangements Please note: The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting . Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionCompany Description Organizations everywhere struggle under the crushing costs and complexities of “solutions” that promise to simplify their lives. To create a better experience for their customers and employees. To help them grow. Software is a choice that can make or break a business. Create better or worse experiences. Propel or throttle growth. Business software has become a blocker instead of ways to get work done. There’s another option. Freshworks. With a fresh vision for how the world works. At Freshworks, we build uncomplicated service software that delivers exceptional customer and employee experiences. Our enterprise-grade solutions are powerful, yet easy to use, and quick to deliver results. Our people-first approach to AI eliminates friction, making employees more effective and organizations more productive. Over 72,000 companies, including Bridgestone, New Balance, Nucor, S&P Global, and Sony Music, trust Freshworks’ customer experience (CX) and employee experience (EX) software to fuel customer loyalty and service efficiency. And, over 4,500 Freshworks employees make this possible, all around the world. Fresh vision. Real impact. Come build it with us. Job Description * Lead executive alignment workshops across strategic and global accounts * Defines value messaging across C-suite buying committees. * Lead discovery workshops, shape customer requirements, and influence deal strategy to drive technical wins. * Deliver compelling and customized product demonstrations aligned to map digital transformation using industry use cases, ROI models, and value storytelling. * Collaborate with AEs, product teams, and solution architects to shape scalable, secure, and future-ready solutions. * Contribute to competitive strategies, offer technical insights, and proactively mentor junior team members (IC1–IC3). * Translate complex customer needs into clear solution architectures, including integrations, APIs, and security considerations. * Champion technical excellence and industry best practices through presentations, internal enablement, and customer engagements. * Advises leadership on innovation, GTM Qualifications * 10+ years of experience in Solution Engineering, preferably in SaaS and enterprise software. * You have an established playbook on using AI to present better, operationalize projects faster, and articulate value clearer * Understands LLM's and can guide customers, team members and products on foundational AI principles * Strong understanding of ITSM/ESM domains; familiarity with platforms such as ServiceNow, Halo, Jira, or similar. * Strong knowledge of ITSM and AI maturity adoption frameworks and integrating ITIL. * Comfortable operating independently in high-stakes, complex enterprise scenarios; able to lead strategy, technical discovery, and deal execution without daily oversight. * Deep knowledge of APIs, webhooks, integrations, and infrastructure components—able to propose and explain solutions without needing additional support. * Skilled in coaching and mentoring peers; committed to team development and cross-functional collaboration. * Adept at aligning customer needs with Freshworks’ platform capabilities, identifying gaps, and working with internal teams to drive innovation. * Confident and engaging communicator with experience influencing C-level stakeholders and diverse technical audiences. * Strong time management skills—capable of owning multiple deals and workstreams concurrently. * Experience leading complex solution design involving custom apps, third-party integrations, and platform architecture. * Demonstrated leadership in internal initiatives, mentoring, or representing your company at industry events. * Bachelor’s degree preferred; equivalent experience accepted. Additional Information The annual base salary range for this position is $163,000 — $234,000 USD. Compensation is based on a variety of factors including but not limited to location, experience, job-related skills, and level. Bonus/equity may be available. Freshworks offers multiple options for dental, medical, vision, disability and life insurances. Equity + ESPP, flexible PTO, flexible spending, commuter benefits and wellness benefits are also offered. Freshworks also offers adoption and parental leave benefits. At Freshworks, we have fostered an environment that enables everyone to find their true potential, purpose, and passion, welcoming colleagues of all backgrounds, genders, sexual orientations, religions, and ethnicities. We are committed to providing equal opportunity and believe that diversity in the workplace creates a more vibrant, richer environment that boosts the goals of our employees, communities, and business. Fresh vision. Real impact. Come build it with us.

Job Description$120,000-$170,000 + VIP Bonus $120000 - $170000 / year Application Deadline: 10/16/2025 Vertafore is a leading technology company whose innovative software solution are advancing the insurance industry. Our suite of products provides solutions to our customers that help them better manage their business, boost their productivity and efficiencies, and lower costs while strengthening relationships. Our mission is to move InsurTech forward by putting people at the heart of the industry. We are leading the way with product innovation, technology partnerships, and focusing on customer success. Our fast-paced and collaborative environment inspires us to create, think, and challenge each other in ways that make our solutions and our teams better. We are headquartered in Denver, Colorado, with offices across the U.S., Canada, and India. JOB SUMMARY We are seeking a highly skilled DevOps Architect to design, implement, and optimize our infrastructure and CI/CD pipelines. The ideal candidate will bring deep expertise in cloud-native technologies, automation, and infrastructure-as-code while driving efficiency, scalability, and security across our systems. This role will serve as a key technical leader, collaborating with engineering, security, and operations teams to deliver robust, secure, and automated solutions. As a DevOps Architect, you will have the opportunity to define and scale the DevOps strategy for a fast-moving and growing organization. You’ll work with a variety of technologies - both current and older, collaborate with high-performing teams, and play a critical role in building secure, automated, and resilient infrastructure. Core Duties and Responsibilities: * Design and implement scalable CI/CD pipelines to support rapid and reliable delivery of applications. * Define and implement infrastructure as code (IaC) patterns to standardize deployments across environments. * Lead initiatives to improve build efficiency and reduce deployment cycle times. * Integrate security best practices into pipelines, ensuring compliance and secure software delivery. * Provide architectural guidance and governance on DevOps practices, tools, and frameworks. * Partner with engineering teams to troubleshoot complex build, deployment, and infrastructure issues. * Evaluate emerging technologies and recommend adoption strategies to improve productivity and system resilience. * Mentor and guide DevOps engineers and developers on best practices. * Other duties as assigned Knowledge, Skills and Abilities: * CI/CD pipeline design and optimization. * Infrastructure as code (IaC) patterns and frameworks. * Build systems, artifact management, and build efficiency improvements. * Secure pipeline design, including secrets management and vulnerability scanning * Strong working knowledge of AWS components. * Strong problem-solving and analytical skills with a focus on root-cause analysis. * Excellent communication and collaboration skills across engineering, product, and security teams. * Ability to balance strategic vision with hands-on execution. * Mentorship and leadership skills to guide teams on best practices. * Adaptability and eagerness to learn emerging tools and technologies. Qualifications: * 5+ years of experience with multi-cloud environments (AWS, Azure). * Bachelors degree in computer science or technical field. * Knowledge of compliance frameworks (SOC 2, ISO 27001, HIPAA). * Experience with service mesh and microservices architectures. * Experience with client/server, n-tier, and database application implementations. * Familiarity with chaos engineering and resilience testing. * Background in networking and security architecture. * Certifications such as AWS Certified Solutions Architect, HashiCorp Certified: Terraform Associate, or Certified Kubernetes Administrator (CKA) are beneficial. Additional Requirements and Details: * Travel required up to 10% of the time. * Occasional lifting and/or moving up to 10 pounds. * Frequent repetitive hand and arm movements required to operate a computer. * Specific vision abilities required by this job include close vision (working on a computer, etc.). * Frequent sitting and/or standing. THE VERTAFORE STORY Over the past 50 years, Vertafore has advanced the entire insurance distribution channel with the best software solutions in the industry. Today, we’re proud to say hundreds of thousands of Vertafore users rely on our solutions to write business faster, reduce costs, and fuel growth by increasing collaboration and streamlining processes. Vertafore leads the industry with secure, cloud-based mobile products that provide superior reporting and analytics, delivering actionable insight— right when customers need it most. We partner with other leading technology companies to deliver comprehensive solutions to improve the way our customers do business and serve their customers. The Vertafore Way Insurance is about relationships, and technology should make those relationships stronger. That’s why, at Vertafore, it’s our mission to transform the way the industry operates by putting people at the heart of insurance technology. By focusing on our customers, becoming better every day, and delivering results you can see, we provide the level of trust and security that insurance is all about. · Bias to Action: We're united by an innate drive to take action and make a difference in the technology and insurance spaces. · Win Together: We work together as one team, showing empathy and respect along the way. · Show Up Curious: We work to challenge one another to push boundaries and think beyond the box. · Say It, Do It: We honor every one of our commitments because integrity is important to us. · Customer Success is Our Success: We cultivate authentic relationships and follow up by actively listening to their needs. · We Love Insurance: We appreciate the impact insurance has on the world. Is this role not an exact fit for you? Keep an eye on our Careers Page for other positions! Vertafore is a drug free workplace and conducts preemployment drug and background screenings. The selected candidate must be legally authorized to work in the United States. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Vertafore strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. We do not accept resumes from agencies, headhunters, or other suppliers who have not signed a formal agreement with us.

Job Description TL;DR Kharon is seeking a full-time QA Automation Engineering Manager based in Denver, Colorado. This role requires in-office attendance at least 4 days a week. RESPONSIBILITIES: • Hire, mentor, and lead a small QA/SET team; be a hands-on player/coach., • Architect, develop, and sustain software test automation frameworks and scripts, ensuring they align with Kharon’s vision., • Forge strong partnerships with developers and the QA community to understand and pinpoint test automation needs., • Craft and oversee meticulous test plans and cases, focusing on exhaustive coverage., • Administer and interpret automated test cases, leveraging results to identify potential pitfalls., • Spotlight areas ripe for procedural enhancement within the testing paradigm, and champion corresponding solutions., • Diagnose and mend issues within our test automation infrastructure, maintaining its integrity., • Document and articulate test automation methodologies and procedures, ensuring clarity and accessibility for all stakeholders., • A Bachelor's Degree in Computer Science, Engineering, or a related field is favored., • 3+ years in software test automation., • 4+ years as a QA or Test Engineer., • Command over at least one major programming language, such as Java, Python, or Javascript., • Deep experience with modern test stacks: Playwright/Cypress/Selenium, REST Assured/Postman, pytest/JUnit/TestNG., • CI/CD proficiency (GitHub Actions/GitLab/CircleCI), containers (Docker/K8s), and cloud (AWS/GCP/Azure), • Solid grasp of test data management, service virtualization/mocking, and observability (e.g., Datadog/Grafana). What does that mean? Great question. Operating at the nexus of global security, Kharon is on a mission to revolutionize the current landscape. We take really complex data as it relates to global security and empower our clients to not only understand the risk associated with their potential business relationships but to operationalize that data so that they can make the best and most informed decisions possible. From financial crimes and sanctions to export controls and threat identifications, our tools optimize protection against the types of risks that could otherwise be incredibly dangerous and excessively costly to any business. Serving many of today’s leading global financial and multinational institutions, Kharon products are the most powerful in the space with a precision and depth that is absolutely unparalleled. When you look at any major global crisis event, we’re providing intelligence that’s at the heart of those circumstances. We connect the dots in a way that’s meaningful. Now, we’re experiencing unprecedented growth. As the world continues to evolve in complexity, so too does the demand for our products. Given the significance of our work and the increasing global reliance on our insights, we are looking for a QA Automation Engineering Manager to join us as we work to shape the way businesses perceive and navigate global risks. Reporting to the VP of Engineering, the QA Automation Engineering Manager will be instrumental in reinforcing our scalable trajectory. Harnessing a robust understanding of the intricacies of software development and testing methodologies, they will oversee the design, enhancement, and maintenance of our software test automation frameworks. Drawing from collective insights and closely collaborating with the internal Engineering team, the QA Engineer will support in amplifying our testing efficiency and shaping the direction of our technology operations. Steering the concept and implementation of processes that support our productivity, adaptability, and reliability, this QA leader will work to enhance our automation strategies, leveraging innovative technologies to sustain our commitment to quality. Documenting our test automation methodologies and interpreting automated test cases, they will provide invaluable insights, spotlighting areas that may be vulnerable and warrant procedural enhancements. To the right person, this will be the perfect kind of challenge. Our mission is compelling, our product is powerful, and we’re growing at a rate that makes us unstoppable. If you’re looking to be surrounded by people who will inspire you to think and challenge you to grow then look no further. Our team is made up of some of the most visionary and uncompromising individuals you will ever encounter. We don’t take ourselves seriously but we’re serious about the work we do and there is absolutely no slowing us down. To keep that momentum going, we do our very best to make sure that each and every team member is completely taken care of. We’re nothing without our people and we strive to offer a package that reflects that. As a Kharon team member, you can expect: • Fully sponsored medical, dental, and vision, • FSA program for both medical and dependent care, • 401k + Roth with matching and immediate vesting If interested in pursuing this position, please visit to apply. Kharon is committed to cultivating and maintaining a workplace that is free from harassment and discrimination. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ethnicity, gender, gender identity or expression, sexual orientation or identity, neurodiversity, appearances, age, protected veteran status, or status as a qualified individual with disability. Powered by JazzHR pLulTWzu2A

Job Description Who we are: At Focused, we move quickly to deliver quality software that achieves client outcomes and meets their customer's needs. We strategically partner with our clients to leverage our expertise in design and software, while our clients bring their own domain expertise. We work with a variety of clients from different industries, collaborating as we get new products to market, modernizing legacy systems, or helping teams learn the skills they need to be successful. Our values: • Listen first • We are experts in product practices but life long learners in the domain of our customers. We research, collaborate, and understand., • Learn why • We ask questions and talk to users to understand problem spaces, objectives, and goals, which allows us to deeply invest and drive towards the outcomes of our clients. What would you be doing? • Build AI-enabled applications leveraging LangChain and LLMs to deliver meaningful, production-ready outcomes for clients., • Deep expertise in LangChain, LangGraph and LangSmith, • Lead teams through end-to-end delivery across the stack, from backend services to modern web UIs., • Pair program daily with teammates and clients to share knowledge, improve code quality, and grow together., • Practice TDD and continuous refactoring to ensure code is reliable, maintainable, and understandable., • Guide architecture decisions to support scalability, observability, and performance., • Collaborate closely with designers, product managers, and stakeholders to continuously deliver valuable software., • Coach developers on the team through pairing, mentoring, and modeling healthy engineering culture., • Influence technical direction beyond the team, working across client orgs and Focused's internal practices to share lessons, shape approaches, and raise the collective bar., • Stay curious through experimenting with new patterns in the GenAI space, share what works (and what doesn't), and help evolve how we build AI-powered software.We are excited about you, because you:, • You're a hands-on, full stack engineer with a strong track record of delivering software in collaborative, agile environments., • You've worked with LangChain (or similar agentic frameworks), and understand how to architect AI-native systems responsibly and effectively., • You have experience leading engineering teams and feel confident mentoring and supporting other developers., • You believe that code quality matters, and that TDD and pairing help build better systems and stronger teams., • You've worked across multiple languages or frameworks (e.g., Python, Node, Java, React, Next.js) and are pragmatic about tool selection., • You're excited about what's happening in the AI space but stay focused on delivering value., • You have experience navigating complex organizations, building bridges across functions, and helping teams adopt modern development practices., • You're as comfortable in the code as you are in a client meeting and can translate technical risks and wins into language anyone can understand., • Paired with a teammate to build a document Q&A system using LangChain and OpenAI APIs, • Helped design an architecture that integrates LLM agents into a legacy enterprise workflow, • Refactored a flaky test suite to support continuous delivery with confidence, • Mentored a junior dev through their first pairing and TDD session, • Built and deployed a full stack GenAI MVP with a React frontend and FastAPI backend, • Facilitated an architecture spike to evaluate vector database options for semantic search, • Contributed a new section to our internal AI playbook, • This role will require being in the Denver office three days per week and up to 20% travel within the United States., • Focused is unable to sponsor or take over sponsorship of the employment Visa process at this time., • The Denver base salary range for this role is $175,000 - $250,000.

Job Description Job Title: Project Engineer/Senior Project Engineer – Commercial Construction Location: Denver, CO/Thornton, CO Job Type: Full-Time Salary: Upwards of $95K Depending on Experience - Bonus can range up to 20%+ About Us We are a Denver based mid size Commercial General Contractor (Multi family as well) and we specialize in delivering high-quality commercial construction projects across a number of verticals including multi family, municipal, Pre Engineered Metal Buildings, Hospitality and much more. With a strong reputation for excellence, safety, and on-time delivery, we take pride in our collaborative team culture and long-standing client relationships. We are currently seeking a motivated Assistant Project Manager (APM) to support our growing portfolio of commercial construction projects. Why work with us: -Tons of projects in the pipeline (30+) -Tons of growth opportunity - we like to have folks grow from within -Super tight knit and hands on culture - tons of team outings (fishing trips/outside events etc.) -Performance Based bonuses that can range upwards of 25% Position Summary: As a Commercial Construction Project Engineer, you’ll play a key role in supporting project managers and superintendents to ensure smooth project execution. You'll help manage documentation, scheduling, budgeting, and coordination with subcontractors and suppliers, all while ensuring quality and safety standards are met. Key Responsibilities: • Assist the Project Manager with planning, scheduling, and coordinating all phases of construction projects, • Manage RFIs, submittals, change orders, and daily documentation, • Collaborate with architects, engineers, subcontractors, and vendors, • Monitor project costs and prepare budget tracking reports, • Support procurement and delivery of materials and equipment, • Ensure compliance with safety regulations and company standards, • Conduct site visits and assist in progress reporting, • Bachelor’s degree in Construction Management, Civil Engineering, or related field, • 1–3+ years of experience in commercial construction (internships included), • Familiarity with construction drawings, specs, and documentation, • Strong organizational and problem-solving skills, • Proficiency in project management software (e.g., Procore, Bluebeam, MS Project), • Excellent communication and teamwork abilities, • Competitive salary and benefits package, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Opportunities for growth and professional development, • A supportive and dynamic team environment If interested you can apply to this position or email your resume to To view additional roles we are recruiting for, please visit:

Job DescriptionPosition Description Our client is a general contractor/construction manager founded on the traditions of work hard, work smart, build well and each day have fun. They enjoy strong client relationships and strives to foster team excellence on each project with our clients and design partners. Their motto is REAL BUILDERS. REAL RESULTS. Their project portfolio includes multi-family residential, mountain resort facilities, hospitality, and commercial work. Primary markets are metro-Denver and Colorado ski areas. Primary Responsibilities: Assists project manager in all aspects of the construction management process including, but not limited to: Project Procurement • Quantity surveys, • Aid in pricing alternates, • Prepare and develop scopes of work, bid packages, comparison sheets, contracts, etc., necessary for subcontractors, • Assist in the preparation, negotiation, development and management of contract administration functions, • Assist in development of project budgets and schedules, • Assisting with preparation and maintenance of the project schedule and cost system, • Schedule updates, • Material handling and storage, • Plan job logistics, • Mobilize trailers, • Arrange for utilities, water, sewer, power, telephones, • Plan specification review, • Assists team with shop drawings, samples, product data (i.e., plans and specs), • Set up logs consisting of subcontractors and suppliers to assist team in acquiring the following, • Insurance certificates, • Contracts, • Applications for payment, • Material delivery, • Develop and ensure compliance with quality control plan, • Participate in project coordination meetings, prepare meeting minutes, • Tracking progress, • Change management – responsible for setting up, issuing documentation, pricing and change administration, • Subcontract administration – defining scope of work, answering inquiries, monitoring progress, tracking and processing back charges, • of temporary facilities and inspections, • Procure and expedite material, • Equipment delivery, • Inventory control – Monitoring and tracking of equipment and resources, • Coordinate subcontractors, • Coordinating and reviewing of drawings, submissions, specifications, changes and document control, • Make sure that field questions are resolved with designers and consultants, • Assist in field operations as deemed necessary by project manager and superintendent, • Assist superintendent in safety and quality control of project, • Complete punch list, • Remove equipment, trailers, etc., • Occupancy permits, • Submit required guarantees and warrantees, • Submit as-built drawings Liaison with building authorities and regulatory agencies Applicants must currently reside in the Denver metropolitan area. Candidates not currently residing in the Denver metropolitan area will not be considered. Position Requirements The Project Engineer assists with the management and coordination of the technical and administrative requirements of a project, to safely meet the time, cost, and quality objectives. Required Skills: • Strong communication and leadership skills, • Ability to work in a team environment, • Bachelor’s degree in Architectural Engineering, Civil Engineering, Construction Engineering, Construction Management, or a related field., • 1 – 3 years construction-related experience in similar capacity Salary Range: $63,400 – $88,929 (based on experience) Potential Annual Bonus: up to 6% Benefits Include: • 100% Company Paid Health, Dental and Vision Insurance for Employee, • Life insurance, Long-Term and Short-Term Disability Insurance, • Flexible Spending Accounts, • Health Saving Account, • Paid Holidays, • Paid Time Off (includes sick time), • 401(k) Plan, • Company Cell Phone or Reimbursement for Company Use of Personal Cell Phone (if applicable)

Job DescriptionCompany Description Organizations everywhere struggle under the crushing costs and complexities of “solutions” that promise to simplify their lives. To create a better experience for their customers and employees. To help them grow. Software is a choice that can make or break a business. Create better or worse experiences. Propel or throttle growth. Business software has become a blocker instead of ways to get work done. There’s another option. Freshworks. With a fresh vision for how the world works. At Freshworks, we build uncomplicated service software that delivers exceptional customer and employee experiences. Our enterprise-grade solutions are powerful, yet easy to use, and quick to deliver results. Our people-first approach to AI eliminates friction, making employees more effective and organizations more productive. Over 72,000 companies, including Bridgestone, New Balance, Nucor, S&P Global, and Sony Music, trust Freshworks’ customer experience (CX) and employee experience (EX) software to fuel customer loyalty and service efficiency. And, over 4,500 Freshworks employees make this possible, all around the world. Fresh vision. Real impact. Come build it with us. Job Description At Freshworks, we pride ourselves on providing industry-leading, AI-first Employee Experience software. Our customers deliver greater levels of service through an intuitive and powerful ITSM, ITAM, ITOM, and ESM platform. If you're looking to move fast and make a significant impact in an exciting space, you're in the right place! We are constantly looking for smart, passionate individuals dedicated to creating great products, designing exceptional experiences, building scalable platforms, and delighting customers. We are seeking a Lead Solution Engineer to join our growing GTM team in North America, focusing on our Enterprise business. If you have strong analytical skills and a methodical approach to problem-solving, we want to hear from you. If you're a confident speaker who can communicate effectively with diverse audiences, we want to hear from you. If you thrive in a fast-paced, high-growth work environment, then we definitely want to hear from you. Reach out to us, and let's chat! As a Lead Solution Engineer, your primary responsibilities include: • Collaborating with our Enterprise customers to identify and address their most critical business challenges., • Supporting the sales team by conducting discovery calls and delivering product demonstrations for active deals., • Gathering requirements effectively to clearly define customer problems., • Building and presenting compelling demonstrations of Freshworks products., • Articulating the value of Freshworks solutions to a variety of audiences., • Embracing lifelong learning and continuously developing your skills., • Evangelizing the refreshing user experience offered by the Freshworks platform. Qualifications • 6-8 years of Solution Engineering experience., • Excellent soft skills and presentation abilities; you will rely on these daily!, • Proven capability to work on cross-functional teams to address business and technical challenges., • Strong verbal, written, presentation, and interpersonal communication skills., • Demonstrated time management skills in a dynamic sales environment; you will manage multiple deals monthly., • Highly driven individuals with a focus on execution and a strong sense of urgency are encouraged to apply., • A Bachelor’s degree is preferred but not required., • Experience selling SaaS products to SLED/Manufacturing customers or ITSM platforms is preferred. Additional Information The annual base salary range for this position is $135,000 — $195,000 USD. Compensation is based on a variety of factors including but not limited to location, experience, job-related skills, and level. Bonus/equity may be available. Freshworks offers multiple options for dental, medical, vision, disability and life insurances. Equity + ESPP, flexible PTO, flexible spending, commuter benefits and wellness benefits are also offered. Freshworks also offers adoption and parental leave benefits. At Freshworks, we are creating a global workplace that enables everyone to find their true potential, purpose, and passion irrespective of their background, gender, race, sexual orientation, religion and ethnicity. We are committed to providing equal opportunity for all and believe that diversity in the workplace creates a more vibrant, richer work environment that advances the goals of our employees, communities and the business.

Job DescriptionAbout SonderMind At SonderMind, we believe everyone deserves one personalized, connected, and effective mental health destination to take care of their mental health and well-being at any stage of life. SonderMind care encompasses everything from therapy and medication management to meditation and mindfulness exercises. Our clinicians leverage our digital tools and research to deliver increasingly high-quality care and to develop thriving practices. Combining technology and human connection, SonderMind drives better outcomes through our comprehensive approach. Learn more about SonderMind at sondermind.com or download the mobile app, available on iOS and Android. To follow the latest SonderMind news, get to know our clients, and learn about what it's like to work at SonderMind, you can follow us on Instagram, Linkedin, and Twitter. About the Role Join the team that is building the next generation of AI-powered mental health tools. As a Staff AI Engineer, you will develop advanced multimodal (voice, text, and vision) systems that power our Mental Health AI Coach and Provider Co-pilot—pushing the boundaries of what's possible in AI while making mental health care more accessible, personalized, and effective. We're looking for a driven and curious engineer with strong fundamentals in software engineering and machine learning who is excited to apply technical expertise to real-world impact. In this role, you'll tackle cutting-edge challenges in AI/ML—from fine-tuning large language models to building robust training pipelines—and see your work directly improve the lives of those seeking care. What you'll do • Design, train, fine-tune, and evaluate machine learning and large language models (LLMs) creating hyper-personalized and highly effective Agentic AI Systems., • Apply context engineering and prompt engineering techniques to optimize model behavior, improve accuracy, and ensure reliability in production., • Develop rigorous evaluation standards that not only measure system performance but also establish the gold standard for efficacy, empathy, and clinical soundness in AI-powered agents., • Contribute to production-grade ML systems, including model deployment, monitoring, and optimization., • Leverage MLOps tools for experiment tracking, model management, and reproducibility., • Collaborate with cross-functional teams to integrate AI into real-world applications, including direct collaboration with clinical partners., • Proactively identify blockers, ask the right questions, and drive projects forward in ambiguous environments., • Mentor and learn within the team—sharing knowledge on ML techniques, fine-tuning and optimization strategies, and engineering practices.What does success look like?, • 30 days: Ship a feature or new improvements to AI Agents to production, • 60 days: Lead a cross-team functionality development or propose a performance or scaling or testability improvement, • 90 days: Lead a system-level architectural improvement or completely new deliverable, propose a clear design, implementation, and rollout plan and execute towards the same.Who You Are, • Strong computer science and math foundations: data structures, algorithms, linear algebra, probability, optimization., • Solid understanding of machine learning fundamentals: supervised/unsupervised learning, regression/classification, reinforcement learning, loss functions, optimization methods, and neural network basics., • Proven experience fine-tuning large language models for production use., • Proficiency in Python and experience building software in production environments., • Proficiency with Deep Learning frameworks such as PyTorch, TensorFlow, Keras, JAX, etc. and ability to reason about model architectures and training processes., • Experience with production systems and MLOps — ability to design, debug, and maintain reliable software. As leaders in redesigning behavioral health, we walk the walk with our employees' benefits. We want the experience of working at SonderMind to accelerate people's careers and enrich their lives, so we focus on meeting SonderMinders wherever they are and supporting them in all facets of their lives and work. Our benefits include: • A commitment to fostering flexible hybrid work, • A generous PTO policy with a minimum of three weeks off per year, • Free therapy coverage benefits to ensure our employees have access to the care they need (must be enrolled in our medical plans to participate), • Competitive Medical, Dental, and Vision coverage with plans to meet every need, including HSA ($1,100 company contribution) and FSA options, • Employer-paid short-term, long-term disability, life & AD&D to cover life's unexpected events. Not only that, we also cover the difference in salary for up to seven (7) weeks of short-term disability leave (after the required waiting period) should you need to use it., • Eight weeks of paid Parental Leave (if the parent also qualifies for STD, this benefit is in addition, which allows between 8-16 weeks of paid leave), • 401K retirement plan with 100% matching which immediately vests on up to 4% of base salary, • Travel to Denver 1x a year for annual Shift gathering, • Fourteen (14) company holidays, • Company Shutdown between Christmas and New Years

Job Description About the Company Galloway & Company, Inc. is a people-first firm company where collaboration, innovation, and career growth are at the heart of everything we do. You will grow personally and professionally with a supportive culture, flexible work environment, and strong focus on leadership development. You'll also work on diverse, impactful projects alongside multidisciplinary professionals experts who are passionate about making a difference. At Galloway, you're not just building communities — you're building a fulfilling career. About the Role As a senior engineer, you will take the lead on planning, scheduling, and coordinating civil engineering work while also managing ongoing project progress. Your role includes collaboration with public agencies and outside stakeholders to ensure the seamless advancement of projects, as well as tackling technical challenges such as conflicting design standards, material feasibility, and multi-party coordination. Beyond technical leadership, you’ll contribute to business development by nurturing existing relationships and showcasing Galloway’s capabilities to prospective clients. You will also guide and coach junior team members—supporting their growth through hands-on mentorship and knowledge sharing. What You'll Do: · Lead the technical direction for designers and engineers across multiple project types. · Oversee and coordinate all phases of civil design and development—including site layout, grading, drainage, utility design, and roadways. · Manage project progress with city, county, and state officials, utility providers, and other agencies to meet compliance and permit requirements. · Provide creative problem-solving to address technical constraints, design conflicts, and coordination complexities. · Prepare and review detailed plans, specifications, permit documents, and supporting calculations for commercial, multifamily, residential, and public works projects. · Mentor and train team members, providing direction and oversight on engineering standards and best practices. · Participate in marketing efforts and client development, helping expand Galloway’s presence and reputation in the industry. Requirements Education: · Bachelor of Engineering from a four-year, board-approved engineering program. Licensing: · Professional Engineer (PE) license preferred. Candidates who are PE-eligible and able to obtain licensure within six months will also be considered. Experience: · Typically requires 5 to 8 years of civil engineering experience, preferably in land development or public infrastructure design. Benefits The estimated starting base salary for this role is $110,000-130,000. We’ve cultivated a culture rooted in collaboration, growth, and innovation. Here’s what you can expect: · 100% employer-paid benefits, setting a high standard in the industry · Opportunities for biannual performance bonuses and profit sharing · A workplace culture that emphasizes internal promotion, mentorship, and career advancement · Nationally recognized as a great place to work—thanks to our outstanding teams and commitment to quality All applicants must be legally authorized to work in the United States. Galloway does not sponsor H1-B or other work visa petitions. Pre-employment and ongoing drug screening is required. Galloway & Company Inc. is proud to be an Equal Opportunity Employer. We welcome applicants from all backgrounds, including protected veterans and individuals with disabilities. Galloway & Company Inc. is proud to be an Equal Opportunity Employer, welcoming applicants from all backgrounds, including protected veterans and individuals with disabilities.

Job Description About Cleerly We're Cleerly – a healthcare company that's revolutionizing how heart disease is diagnosed, treated, and tracked. We were founded in 2017 by one of the world's leading cardiologists and are a growing team of world-class engineering, operations, medical affairs, marketing, and sales leaders. We raised $223M in Series C funding in 2022 which has enabled rapid growth and continued support of our mission. In December 2024 we received an additional $106M in a Series C extension funding. Most of our teams work remotely and have access to our offices in Denver, Colorado, New, York, New York, Dallas, Texas, and Lisbon, Portugal with some roles requiring you to be on-site in a location. Cleerly has created a new standard of care for heart disease through value-based, AI-driven precision diagnostic solutions with the goal of helping prevent heart attacks. Our technology goes beyond traditional measures of heart disease by enabling comprehensive quantification and characterization of atherosclerosis, or plaque buildup, in each of the heart arteries. Cleerly's solutions are supported by more than a decade of performing some of the world's largest clinical trials to identify important findings beyond symptoms that increase a person's risk of heart attacks. At Cleerly, we collaborate digitally and use a wide variety of systems. Our people use Google Workspace (GMail, Drive, Docs, Sheets, Slides), Slack, Confluence/Jira, and Zoom Video, prior experience in these areas is a plus. Role or department specific technology needs may vary and will be listed as requirements in the job description. While we are mostly a remote company, travel is required for some team meetings and cross function projects typically once per month or once per quarter, for some roles like sales or external facing roles travel could be up to 90% of the time. About the Opportunity We're looking for a Staff Cloud DevOps Engineer to join our growing team and play a key role in advancing our next-generation, AI-powered diagnostic platform. In this role, you'll be a leader on our DevOps team responsible for designing and evolving the systems that support continuous integration, automated testing, secure infrastructure, and reliable software delivery. As a senior leader of the team, you'll lead initiatives that enhance build and release pipelines, develop internal tools and services, and ensure the scalability, performance, and security of our infrastructure. You'll also help define best practices, guide architectural decisions, and mentor more junior DevOps engineers. This is an ideal role for someone who thrives in fast-paced environments, enjoys solving complex problems, and has a passion for building and improving cloud-native systems that accelerate engineering velocity. TTC*: $207,000 - $235,000 *Total Target Compensation (TTC): Total Cash Compensation (including base pay, variable pay, commission, bonuses, etc.). We hire employees anywhere within the United States and account for geography when determining base salary. Responsibilities • Lead automation of deployment, configuration, and infrastructure operations across operating systems, databases, networks, and hybrid cloud environments., • Own and maintain the Terraform codebase, implementing infrastructure as code best practices and enforcing security and compliance via policy-as-code., • Design, implement, and maintain CI/CD pipelines using GitHub Actions to ensure fast, reliable, and secure delivery of infrastructure and application changes., • Manage Kubernetes environments (EKS), including cluster provisioning, workload orchestration, scaling, upgrades, and observability., • Demonstrate strong expertise in AWS security, encryption, and backup practices, including compliance with frameworks such as SOC 2, HIPAA, and HITRUST., • Manage monitoring and log analysis using tools like CloudWatch, CloudTrail, GuardDuty, Datadog, and Sentry., • Collaborate with application teams to gather requirements and deliver secure, scalable migration paths using AWS services like CloudFront, ECS, EC2, EKS, ElastiCache, Aurora, DynamoDB, SQS, SNS, Step Functions, and Lambdas., • Champion Agile and DevOps transformation by promoting best practices, continuous improvement, and team-level adoption strategies., • Contribute to org-wide initiatives focused on improving test infrastructure, environment stability, and automation tooling., • Proactively identify security gaps in infrastructure and tooling; implement controls and guardrails using IAM, AWS Config, and security scanning tools., • Collaborate closely with engineering, security, and IT teams to ensure infrastructure aligns with product requirements and compliance standards., • Design and implement highly available, fault-tolerant systems with strong observability and disaster recovery capabilities., • Define and track SLAs/SLOs in partnership with product and engineering teams, leveraging observability tooling to monitor service health., • Monitor infrastructure costs and lead optimization efforts across compute, storage, and networking resources., • Bachelor degree in Computer Science, Software Engineering, or related field, • 12-15 years of experience as a DevOps Engineer in Cloud environments (preferably AWS)., • 8+ years of experience in server administration (Linux)., • 8+ years of experience in scripting or development languages (Bash Shell Script, Python, Node.js)., • Excellent communication and collaboration skills., • Strong problem-solving and debugging capabilities., • Detail-oriented, with a focus on delivering high-quality, maintainable code., • Amazon AWS Certified Solutions Architect certification, • Amazon AWS Certified Developer certification, • Amazon AWS Certified SysOps Administrator certification, • H: Humility- be a servant leader, • E: Excellence- deliver world-changing results, • A: Accountability- do what you say; expect the same from others, • R: Remarkable- inspire & innovate with impact OUR COMPANY IS AN EQUAL OPPORTUNITY EMPLOYER. We do not discriminate on the basis of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law, ordinance, or regulation. By submitting your application, you agree to receive SMS messages from Cleerly recruiters throughout the interview process. Message frequency may vary. Message and data rates may apply. You can STOP messaging by sending STOP and get more help by sending HELP. For more information see our Privacy Policy (). All official emails will come from @cleerlyhealth.com email accounts. #Cleerly

Job Description The Senior Reservoir Engineer – Corporate Planning role will play a key role in supporting leadership and cross-functional teams in forecasting, monitoring, and tracking the execution of the capital program. This includes updating the monthly reforecast, working with the teams to create and present the Budget/Mid-Year Update and Long-Range Plan, and performing economic analysis. ESSENTIAL RESPONSIBILITIES/DUTIES: • Execute the Budgeting & Mid-Year Update Processes, • Execute the Long-Range Plan Process, • Provide monthly reforecast by utilizing the Master Operations schedule and operational updates to all necessary teams, • Perform scenario analysis to identify potential risks and uncertainties that could affect the project schedule and develop mitigation plans. Also create contingency plans to address unexpected issues., • Track key metrics and integrate these into the monthly reforecast, • Analyze and benchmark internal and external key variables, • Perform quarterly portfolio analysis to help guide future investment decisions, • Perform quarterly look-forward and look-back to identify lessons learned and areas for improvement in future projects, • Analyze accuracy and variability of forecasting methodology, • Assist in the preparation of documentation in support of Investor Relations, • Work closely with Asset and Operations teams to ensure critical business impacts are accurate and accounted for., • BS degree in Petroleum, Mechanical, or Chemical Engineering required, • Finance or Data Analytics background considered with applicable prior operational / asset exposure, • Solid understanding of engineering economic evaluations, • Demonstrated strategic perspective & experience working in Corporate Planning team preferred, • An asset & operations background with working in a multi-disciplinary team is a plus, • Exposure to horizontal drilling, hydraulic fracturing, and production operations, • Experience with industry/company software including: MS Office, Aries, Spotfire, Wellview, Alteryx, Power BI and SQL Server, • Driven, enthusiastic, and passionate, • Self-directed, organized, and detail oriented, • Strong project management skills and the ability to advance multiple projects simultaneously; takes a multi-disciplinary approach to projects, • Ability to collaborate effectively in a team environment, • Proficient in written, verbal, and formal presentation communication., • Ability to manipulate and wrangle data from various sources in an efficient manner, • Applies specialized knowledge in the completion of projects, • Actively transfer knowledge to colleagues and management, • Experience integrating /utilizing AI in workflow processes a plus, • Proactive & creative problem solver integrating new and evolving technologies, • SQL or other coding experience preferred. SM Energy offers competitive compensation and benefits programs which include, but are not limited to, variable pay, health care coverage, retirement plan, protection coverage, time off and leave programs, training and development opportunities and a range of allowances connected to specific work situations. Details are available at Careers :: SM Energy Company (SM) (sm-energy.com). Applications will be accepted on an ongoing basis until the position is filled.

Job Description PDS 11 / Power Delivery Substation Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full service engineering, procurement, & construction management firm covering power, defense, aerospace, industrial, commercial and municipal entities. We specialize in power generation and delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! We're always looking for exceptional people to bring new ideas, fresh thinking, and the motivation to help shape our growing company. It's an exciting time to be a part of our team as we invest in our team and prepare to meet the challenges of tomorrow. Our values guide our work. Want to join us? By joining our team, you’ll be working on projects that improve the electric grid infrastructure while also being on the forefront of green initiatives. We are honored to say that your work will make a difference in the lives of many people. Mesa seeks a senior level power systems engineer with 8-10 years of experience performing transmission power system protection studies and relay settings including but not limited to: • Development of relay protection schemes using microprocessor-based relays to protect transmission and distribution assets., • Perform protective device coordination for transmission lines, buses, transformers, capacitor banks, circuit breakers, and reactors., • Develop logic settings to support desired relay schemes., • Perform area protective device coordination studies., • Perform transmission level impact and feasibility studies., • Load Flow Studies, • Short Circuit Studies, • Insulation Coordination, • Preparing reports documenting the process and results of the studies performed, • Performing reviews of studies performed by others and provide constructive feedback, • Working with clients to assist them in meeting their compliance requirements, • Mentoring less experienced associates to help them progress, • Utilizing good verbal and written communication skills with team members and clients, • Working with the Engineering Manager and Principal Engineer to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Capable of acting as Lead Engineer on complex studies which require interfacing with the client, other engineering firms, and other departments within Mesa. This includes the identification of study input requirements and coordinating the collection of the input information and data., • Conceptualizing the initial design approach for a major phase of a large project or have overall responsibility for the engineering work on a routine project., • Exercising judgment in the independent evaluation selection, and substantial adaptation and modification of standard techniques, procedures, and criteria., • Preparing and verifying calculations using engineering formulas and skills or application specific software as required., • Managing personal task assignments, and for designated team members to ensure adherence to scope, schedule and budget., • Monitoring project execution milestones and schedules to ensure projects are completed on schedule., • Performing technical and coordination checking/ review of deliverables and other project or study documents. The successful candidate will be responsible for both relay settings and studies associated with substation P&C design projects supporting large electric utility clients as well as renewable projects. Primarily, the renewable projects are connecting utility scale solar farms, battery energy storage systems (BESS), and large wind farms to the connecting utility through substations. Preferred software skills: • PSS/E, • PSLF, • ETAP, • ASPEN, • SKM, • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus $98,198-$145,749 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 11 / Power Delivery Substation / Renewables We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Senior Protection and Controls (P&C) Engineer with at least 8 years of experience, who will be responsible for the design, checking and oversite of deliverables associated with high voltage substation design projects, both in renewables and for utility clients. This person will be responsible for high level design tasks and/or checking of deliverables created by other engineers associated with high voltage substations. This typically includes, but is not limited to: single line diagrams, control house layouts, panel front views, elementary and/or schematic diagrams, wiring diagrams, communications diagrams, nameplate drawings, bills of materials, and cable schedules, as well as construction specifications. • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Must have excellent verbal and written communications skills, and the ability to convey technical knowledge in simple and practical language, • Professional Engineer (PE) License required, • Works under the direction of Project Managers/Principal Engineers, • As a fully competent engineer, independently evaluates, selects and applies engineering principles and practices relevant to the project requirements, • Works with the team to define project objectives, prepare design estimates, and define project requirements and design approaches for large or complex projects., • Responsible for determining design approach and working with design team to prepare required design documents (e.g., drawings, specifications, calculations, etc.)., • Responsible for conceptualizing the initial design approach for a major phase of a large project, or have overall responsibility for the engineering work on a routine project., • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus $108,366.46-$147,070.20 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS - 11 / Power Delivery Substation Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a motivated Project Engineer to manage large multi-discipline Renewable projects (wind, solar, BESS, hybrid). This role will augment our existing and growing Renewable team that currently supports several clients ranging from utilities and energy developers to EPC contractors. The position requires approximately 50% technical project work (PE License required) and 50% project management. Responsibilities will include technical review of design deliverables, coordinating between discipline, communication and collaboration with the client's project managers and project engineers, as well as collaborating and working with other design teams from external consultants. Required abilities: • Possess in-depth knowledge of large renewable projects (greater than 20 MW) and the expected design deliverables to support these projects., • Possess strong verbal and written communications skills. Ability to coordinate with and interface with clients, vendors, engineers, colleagues, and other electric utilities personnel., • Possesses strong interpersonal skills to build relationships and work effectively with clients, peers, and affiliates., • Possess willingness to develop, promote and comply with Mesa safety requirements., • Possesses ability to understand and implement new processes/procedures with regards to Project and Program management., • Knowledgeable regarding the technical Project Management expectations for development, analysis, design, interconnection, and construction of large renewable projects., • Experience with wind, solar, BESS, and high voltage substation equipment, systems and projects., • BS in Engineering from an ABET accredited college/university, • 8-10 years of relevant project experience, • Propose on Projects: Review and evaluate technical RFPs and help develop proposals and cost estimates for engineering analysis, power system studies, and detailed design., • Initiate projects: Complete project initiation documents, which include detailed work scope/outline, budget, and schedule for completion., • Project Definition: Assist Project Team in defining/clarifying project scope and level of detail required to satisfy customer expectations and project requirements., • Manage Project Implementation – Lead the assigned project teams and subcontractors to ensure that project goals/objectives are achieved and the expected deliverables are aligned with the scope and client needs., • Perform some technical reviews of completed project work to check for errors., • Possibly serve as Engineer of Record for project deliverables., • Communicates effectively with project team, subcontractor, and clients as required to facilitate coordination of design or construction activities and flow of technical information. This includes tracking/resolving action items, information requests and assisting the design team in the resolution of technical issues as required., • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus $109,561.32-$151,295.77 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description A Southland Holdings company is currently accepting resumes for highly motivated Field Engineers to join our team in Denver, CO. Responsibilities/Duties: · Receive, review, forward and track status of submittals · Assist in management of project permit process · Assist is preparation of bid packages and procurement · Receive and review change orders · Assist more senior civil engineers with entry level engineering tasks · Assist with performing onsite construction administration and construction observation · Services including reporting/monitoring contractor's compliance with contract documents · Evaluates change order requests including design changes, specifications and drawing releases and reports status. · Evaluates submittals of shop drawings, material data and samples and takes appropriate · Action based upon contract specifications. · Reviews and processes as-built drawings to ensure that all changes during the course of construction are recorded. · Completes project close out requirements in accordance with contract documents. · Coordinates meeting agendas, prepares minutes and follows up on action items · Maintains effective and professional relationships with owners, architects, engineers and contractors. · Executes additional duties and responsibilities as assigned. Qualifications: · Construction/related degree with 1-5 years construction experience · Excellent computer skills and analytical ability · Experience working with Primavera P6, AutoCad · Understanding of industrial construction process · MUST - Experience in civil, infrastructure to include: Tunneling, heavy highway, DOT projects, pipeline, water treatment, marine, etc. · Must have ability to interpret contract specifications and drawings · Knowledge of contract procedures and principles · Ability to communicate effectively and work in a team environment · Ability to understand construction logic and sequencing of complex projects Education: Bachelor’s degree in Construction Management or Civil Engineering Relevant experience can waive degree. Benefits (Full-time): • 401K & 401K Matching, • Dental Insurance, • Health Insurance, • Life Insurance, • Vision Insurance, • Paid Time Off (PTO), • Referral Program, • Weekly payroll For more than 120 years, hard-working, honest, innovative people have been building what has become SOUTHLAND HOLDINGS. We combine the strengths of six companies who share a dedication to building critical infrastructure projects which improve the environment and lives of those around us. Southland Holdings is an EEO employer - M/F/D/V Powered by JazzHR EoRpiA9dPW

Job Description As the first and often the most frequent point of contact for our clients, you will have the greatest opportunity to influence the client's perception of Evertz. This position is a challenging mix that combines technical know-how and customer service in regards to inquiries regarding products, installations and systems. Responsibilities: • Respond and provide technical direction to customers regarding operational issues, firmware upgrades and general maintenance, • Assess the customer’s product application, troubleshoot and diagnosis issues through research and/or re-creation to determine the root cause, • Recommend solutions utilizing various levels of technical language appropriate to the customer in a timely, clear and professional manner, • Maintain a communication link between customer service and other departments by partnering to resolve customer issues and communicating customer feedback to aid in design changes including customer “feature requests” to product managers, • Support the development of product communications by generating or authoring customer guides and provide the technical writing group with information including Pinouts, FAQ, Application notes, Best Practices and customer product or system configuration and product integration with other manufacturer’s products, • Electrical, Electronic, or Computer Electronic Technician Diploma required, • Direct experience with Server Hardware, Linux OS and Network setup is an asset, • Similar experience will be considered an asset, • Unparalleled desire to help the customer and deliver service excellence, • Passion for technology and learning new software and hardware products, • Strong verbal and written communication skills, • Self driven with a desire to add value to an energetic team, • Problem-solving ability and able to react to changing situations, • Ability to multi-task in a fast-paced environment, • Must be eligible for international travel and be able to work alone with little or no supervision, • 1-2 years experience working with broadcast/post-production products would be an asset, • Competitive total compensation package, • Comprehensive Benefit Plan, • Company contributed 401k Plan, • Work-life balance, • Career progression Evertz Microsystems (TSX:ET) is a leading global manufacturer of broadcast equipment and solutions that deliver content to television sets, on-demand services, WebTV, IPTV, and mobile devices (like phones and tablets). Evertz has expertise in delivering complete end-to-end broadcast solutions for all aspects of broadcast production including content creation, content distribution and content delivery. Considered as an innovator by their customers, Evertz delivers cutting edge solutions that are unmatched in the industry in both hardware and software. Evertz delivers products and solutions that can be found in major broadcast facilities on every continent. Evertz’ customer base also includes telcos, satellite, cable TV, and IPTV providers. With over 2,000 employees, that include hardware and software engineers, Evertz is one of the leaders in the broadcast industry. Evertz has a global presence with offices located in: Canada, United States, United Kingdom, Germany, United Arab Emirates, India, Hong Kong, China, Singapore, and Australia. Evertz was named one of Canada’s 50 Best Managed Companies, which recognizes excellence in Canadian-owned and Canadian-managed companies. Canada’s 50 Best Managed Companies identifies Canadian corporate success through companies focused on their core vision, creating stakeholder value and excelling in the global economy. Evertz makes certain there is an equal employment opportunity for all employees and applicants for employment, including persons with disabilities. In compliance with AODA, Evertz will strive to provide accommodation to persons with disabilities in the recruitment process upon request. If you are selected for an interview and you require accommodation due to a disability during the recruitment process, please notify Human Resources upon scheduling your interview. Thank you for considering a career with Evertz! Please note, this email address will only respond to requests regarding privacy concerns. This inbox will not respond to job applications, resumes, or questions regarding an application. When you apply to a job on this site, the personal data contained in your application will be collected by Evertz Microsystems Ltd (“Controller”), which is located at 5292 John Lucas Drive, Burlington, Ontario, Canada and can be contacted by emailing . Controller’s data protection officer is Nadiera Toolsieram, who can be contacted at . Your personal data will be processed for the purposes of managing Controller’s and its' subsidiaries' and affiliates' recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results thereto, and as is otherwise needed in the recruitment and hiring processes. Such processing is legally permissible under Art. 6(1)(f) of Regulation (EU) 2016/679 (General Data Protection Regulation) as necessary for the purposes of the legitimate interests pursued by the Controller, which are the solicitation, evaluation, and selection of applicants for employment. A complete privacy policy can be found at Your personal data will be retained by Controller as long as Controller determines it is necessary to evaluate your application for employment. Under the GDPR, you have the right to request access to your personal data, to request that your personal data be rectified or erased, and to request that processing of your personal data be restricted. You also have to right to data portability. In addition, you may lodge a complaint with an EU supervisory authority. Powered by JazzHR Vg0i0IbGzu

Job Description We are seeking a highly skilled Wireless Field Integrator with Ericsson experience to join our team in the Denver market. You will work closely with engineering and operations teams to integrate, test, and optimize wireless networks utilizing Ericsson technologies. This is a long-term position, and you MUST be authorized to work in the US for any employer. Market: Denver, Colorado Duration: 6 - 12 Months Key Responsibilities: • Implement software installation, configuration, integration, and migration work., • Prepare, document, and complete SOW, end-to-end test, and acceptance test., • Troubleshoot, identify defects, fix or seek resolution, • Identify and drive product or process improvements., • Collaborate in a team environment with excellent collaboration and support., • Extensive knowledge on 4GLTE /5G Ericsson technologies. Including Band frequencies, • Extensive troubleshooting skills with these technologies. Capable of identifying issues in a timely manner, • Extensive knowledge on Back Haul transport and fiber loss troubleshooting. Capable of identifying issues at a minimal time., • Ericson 6160 Controller Integration experience, • BBU 5216/6630/6648/6651/6610 installation and integrations., • Used ESI (Ericsson Site Integrator) box for auto integrations with ECI scripts., • Knowledge on manual integrations on BBUs with CV restore and SIF files, • Ensure that Operating System (OS), Hardware (HW), Software (SW), licenses, and configuration data is up-to-date and in the correct format., • Able to perform SRS automated call testing, including the E911 testing, • Knowledge on Back haul transport and fiber loss troubleshooting., • NEA/AREA Testing experience, • Alarm 66 Testing experience, • Able to travel around the market., • Knowledge on Excel and word for reporting and tracking purposes for daily logs., • Creating & innovating, • Applying expertise & technology, • Analytical learning and researching skills, • Delivering results & meeting customer expectations, • You will need excellent planning and organizing skills, • Troubleshooting skills., • OSHA 10, • CPR/First Aid (In-person), • Blood Bourne Pathogen, • RF AwarenessCompany DescriptionEmpire Engineering Services LLC is a dynamic leader in engineering solutions, known for its comprehensive range of specialized services across various sectors. Our commitment to precision, efficiency, and innovation sets us apart in the industry. At EES, we are dedicated to setting the highest standards in engineering excellence and continually advancing our capabilities to meet the evolving demands of the industry.Empire Engineering Services LLC is a dynamic leader in engineering solutions, known for its comprehensive range of specialized services across various sectors. Our commitment to precision, efficiency, and innovation sets us apart in the industry. At EES, we are dedicated to setting the highest standards in engineering excellence and continually advancing our capabilities to meet the evolving demands of the industry.

Job DescriptionLove Where You Work! If working for a team of dynamic professionals that create award winning projects for some of the world’s most successful companies sounds exciting, rand* construction corporation is where you want to be. Voted a Great Place to Work for 15 years in a row, rand* provides a culture of excellence that offers unlimited growth. We are seeking dynamic Project Engineers that are looking for a company where they can learn and grow. What you’ll do: Under the supervision of the Project Manager / Senior Project Engineer, this position performs essential project management tasks such as updating project schedules, processing submittals and RFIs, assisting with the subcontractor procurement process, coordination, project delivery and close out. This position is intended as an entry level position for individuals to gain foundational experience required to become a Senior Project Engineer. ABOUT rand* rand* construction is an award-winning, woman-owned national commercial contractor specializing in tenant interiors, retail, restaurants, and building renovations (capital expenditure). Founded in 1989 by Linda Rabbitt, rand* has grown from a small interiors firm to a multi-market construction company with revenues in excess of $600 million annually. offering a wide range of services to national and regional clients. We are proud to be named a “Top Workplace," and a Best Place to Work by local business journals. Our culture of excellence has produced close to 200 Industry awards for our quality of work. Most importantly, we love to promote from within. 80% of our Executive Leadership began their careers at rand* in our entry level positions. Qualified Candidates will possess the following: • Bachelor’s degree in engineering, construction management, architecture or related field., • Good time management and prioritization skills., • Ability to read construction drawings., • Working knowledge of Microsoft Office Suite., • Ability to learn new technology utilized in project management., • Excellent communication skills., • Professional demeanor., • Strong problem-solving skills., • Ability to develop strong working relationships., • Reliable and dependable., • Positive attitude and ambition., • Continual determination for self-improvement., • Pay Type: Salary, • Pay Range: $65,000 to $75,000 per year, based on qualifications and experience., • Paid Time Off (PTO) + Paid Holidays, • 401(k) Plan with Company Match, • Medical, Dental, and Vision Insurance, • Parental and Family Caregiver Leave, • Employee Assistance Program, • Health Savings Account (HSA), Flexible Spending Account (FSA) Options, • Long-term Disability (LTD)

Job DescriptionDescription: APEX Engineers, Inc. is seeking motivated civil/structural or architectural engineering students for our Summer Structural Internship. Our interns don’t just “shadow” engineers—they dive into real project work from day one. The program mirrors the first 12 weeks of a full-time new graduate’s onboarding, giving interns a clear window into what it means to start a career in structural engineering. You’ll work alongside licensed engineers on active projects, gaining hands-on experience in design, analysis, and project coordination across a variety of building types including commercial, industrial, multifamily, and residential projects ranging from entry-level homes to high-end custom residences. Why APEX? • Hands-on project experience, not just observation., • Exposure to diverse project types and design challenges., • A collaborative culture in a mid-sized firm—large enough to tackle exciting projects, small enough that your contributions make an impact., • A structured internship program that builds the same foundation as our full-time new graduate onboarding.Requirements: What We’re Looking For • Currently pursuing a bachelor’s degree in civil/structural or architectural engineering from an accredited institution., • Completion of junior-year coursework by start of internship (preferred courses: statics & dynamics, structural analysis, steel, concrete, soils, foundations)., • GPA of 3.0 or higher preferred., • Strong problem-solving skills, initiative, and attention to detail., • Excellent communication skills and a collaborative mindset., • Proficiency in Revit (primary) with working knowledge of AutoCAD., • Prior construction or design-related experience a plus., • This position requires the final candidate to successfully pass an E-Verify check What You’ll Do • Contribute to structural analysis, design, and documentation under the guidance of project engineers., • Develop familiarity with building codes (IBC, IRC) and design standards., • Create and refine building models and drawings in Revit (AutoCAD exposure limited)., • Perform structural calculations (e.g., steel, concrete, wood, masonry, wind, seismic) using tools such as RISA and Enercalc., • Coordinate with project teams to support construction document preparation and design reviews., • Communicate with project managers and team members to manage workload, timelines, and deliverables. Technical Exposure You’ll Gain • Revit-based modeling and documentation., • Structural analysis software (RISA 2D/3D, Enercalc)., • Application of IBC and IRC code provisions., • Multimaterial design: steel, concrete, masonry, wood., • Practical application of wind and seismic design concepts., • Professional consulting skills: client-service orientation, project coordination, and workload management. Additional Employment Information • This position requires successful completion of an E-Verify check., • We are not able to offer visa sponsorship (including CPT/OPT) at this time., • Recruiters, please do not contact us regarding this posting.

Job Description Compensation: 22.00 to 25.00 DOE Benefits: Medical, Dental & Vision PTO for F/T Employees Sick Time 1 hour for every 30 hours worked max of 48 hours Paid Vacation Paid Holidays (8) Hotel Discounts The Warwick Denver is seeking a candidate who will help maintain a building that is rich in history. The qualified candidate will not only have the qualifications listed below, but also know HVAC, Electrical, as well as repairing and painting different aspects of the building. POSITION PURPOSE Seeking full-time engineer.. Most specifically, seeking a person to maintain the entire hotel facility, including the physical building structure, all mechanical, electrical, HVAC systems, and related equipment by energy conservation and preventative maintenance programs. Ensure the upkeep of guest areas to maintain an attractive hotel. ESSENTIAL FUNCTIONS Complete work orders and visually assess the safe and efficient maintenance and operation of the physical structure(s) of the hotel, all mechanical, electrical, HVAC systems and any other related equipment. Completion of all routine maintenance on public spaces, meeting rooms, ballrooms, outlets, back of the house spaces, and grounds. Completion of all repairs, replacement, and renovation projects to offices and employee work areas. Adhere to all corporate-required purchasing policies and controls, including, but not limited to, all outside contractor bids, budgets, and schedules. Follow prescribed safety procedures for personnel and equipment by the company and OSHA. Work with the Chief Engineer to maintain effective Energy Management and Preventive Maintenance programs and conduct special training for other operating departments on the safe and efficient use of equipment and energy in the hotel. Inform the General Manager and hotel department heads on a regular basis regarding the specific and overall condition of the building structure(s), related systems, and equipment offering prudent, cost effective proposals for maintaining these systems. Access and input information into a computer and generate reports (if applicable). SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the hotel: Make necessary repairs and maintenance throughout the hotel. Prepare technical data, bidding, project work, alterations, and repairs for properties. Must have basic knowledge of building codes. Actively train in fire prevention, environmental health and safety and engineering systems. Attend morning walk arounds as required. SPECIFIC JOB KNOWLEDGE, SKILLS AND ABILITIES The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills and abilities: Must be able to speak, read, write and understand the primary language(s) used in the workplace. Must be able to read and write to facilitate the communication process. Most tasks are performed in a team environment with the employee acting as a team leader. There is minimal direct supervision. Must possess basic computational ability. Must have a knowledge of all types of mechanical equipment such as chillers, boilers, water softeners, and refrigeration equipment. Must have knowledge of plumbing and electrical systems, maintenance of records of power, water and fuel consumption.

Job Description Hi 👋🏾 I’m Abhik, Ashby's Co-Founder and VP of Engineering. As someone who could design and build software, this position is close to my heart. I always felt I had a unique perspective because I could play with design ideas and iterate in code. My ideas could start in Figma but then be grounded (or sometimes more creative) in code. My prototypes used actual logic and data. My changes cascaded throughout the app for comprehensive critique (thanks, React component system!). But, every company made me pick one —I couldn’t design and build. At Ashby, you can. While every engineer can design and build, you’ll tackle our most challenging design problems and help others improve their designs by expanding and enhancing our in-house design system and consulting on bespoke work. To ground it with examples, engineers who can design at Ashby have: * Redesigned our mobile web app by talking with customers who use it often, wireframing new flows, implementing its design system, and using it to make the wireframes a reality. * Built a set of flexible, composable components in our design system that allow other engineers to build custom autocompletes. These autocompletes can contain filters, options to create new records, etc. * Helped another engineer improve their design's information hierarchy and scannability for viewing a candidate’s assessments. Recruiters can quickly parse information and pick out anomalies. These projects reflect what we’re accomplishing at Ashby: improving the productivity of working professionals (starting with talent teams) with intelligent and powerful software. We put a lot of effort into designing products that are approachable to beginners but mastered & extended by power users. In many ways, spreadsheets set the bar here. We have notable customers like Notion, Linear, Shopify, and Snowflake. Our growth and retention metrics are best-in-class among our peers: we have tens of millions in ARR, growing >100% year over year, over 2500 customers, very low churn, and many years of runway. We’ll share more details once we meet, but you now probably have a good idea as to why we're hiring for this role 😅. What We’re Building As engineers, we are used to tooling that makes us better at what we do. When we started Ashby, we saw the opposite with Talent Acquisition software. Recruiting teams were leveling up how they did their work, but instead of software meeting this new standard, it held them back. Scheduling a final round is an excellent example. Recruiting teams wanted to schedule candidates faster, track interviewer preparation and quality, and do it with half the headcount. A recruiter needed to manually collect availability from the candidate, identify qualified interviewers, perform “Calendar Tetris” to find who is available to interview the candidate, schedule on the earliest date possible, and make any last-minute adjustments as availability changed. They must do this while considering the interview load on each individual and whether interviewers need to be trained and shadowing others. 🥵 TA software didn’t help. As hiring managers, we know TA is a critical function, and as engineers, we know software can do better. So, we built and continue to build Ashby to give TA teams the highest standard of tooling. Software that’s intelligent and powerful. Software that provides insights into where they’re failing and automates or simplifies many of the tasks they’re underwater with. We want other functions and departments to be jealous of what TA teams can do with Ashby, and today they often are! Engineering Culture Our engineering culture is motivated by Benji’s (my Co-founder and CEO) and my belief that a small, talented team, given the right environment, can build high-quality software fast (and work regular hours!). We do it through: * Minimal process with ownership over decisions normally made by product and design * Natural collaboration and deliberate communication * Investing in tools and abstractions that give us leverage * Putting effort into building a diverse team Minimal Process & Lots of Ownership The best engineers we’ve worked with delivered reliably magical outcomes. They took customer problems and relentlessly drove them to solutions that were not only successful but often brilliant and creative. While they did this with minimal oversight, stakeholders were never in the dark as to what was going on, and no setback was a surprise. Traditional product-development processes aren’t meant for the best engineers. Their purpose is to create consistent outcomes regardless of the engineer’s skill. But, consistency comes at the expense of an engineer’s time and freedom—both ingredients necessary to generate those magical outcomes. As a result, process stifles the best engineers and doesn’t give others the opportunity to practice the behaviors that made the best engineers the “best.” At Ashby, we want to build an environment that encourages every engineer to be their best. So, at Ashby, every Engineer runs their project. Product Managers (and Designers) build strategy, do customer research, and hand off problem briefs to Engineers. Engineers take on the rest: they research the problem, write product specs, build wireframes, and implement their solution end-to-end. We rely on engineers, not process, to push information outward to the relevant folks (e.g., Product Managers) and pull folks in to help (e.g., Designers, Infra). It’s a new level of ownership for many engineers, but we’d rather an engineer fail a bit and coach up their skills than use process as a crutch. Not everyone succeeds in our culture, but those who do thrive. Collaboration is Natural & Communication is Deliberate Our engineering team consists of lifelong learners who are talented but also humble and kind (meet them here!). These attributes create an environment where collaboration happens naturally. We combine this with research, prototyping, and written proposals to see around corners and get feedback from the team across time zones. Focus time is something that we hold sacred, and, with thoughtful and deliberate communication, engineers are in <2h meetings per week (I wrote about it here). To drive it home, here's a recent calendar of an engineer who has been with us for over 4 years: We also meet in person at least twice a year, once as a department and once as a company. You also have a small budget to meet up with folks in your city/region. Increase Leverage, not Team Size We built Ashby with the quality, breadth, and depth that many customers would expect from much larger teams over larger time scales. We’ve done this through investment in: * Great developer tooling. Our CI/CD takes ~10m, and we deploy at least 15x a day. A debugger that works out of the box. Everyone on the team has contributed to our developer experience 💪🏾. * Building blocks to create powerful and customizable products fast. At the core of Ashby is a set of common components (analytics modeling and query language, policy engine, workflow engine, design system) that we constantly improve. Each improvement to a common component cascades throughout our app (short video below). Here’s an impromptu quote from Arjun in our company Slack of what it’s like to build a feature at Ashby: And a demo of one of these building blocks: Put Effort into Diversity Diverse teams drive innovation and better outcomes. Having seen my mother and partner build their careers as minority women in non-diverse fields, I want to make sure Ashby creates opportunities for the next generation of engineers from underrepresented groups. Today, 21% of engineers at Ashby are from underrepresented groups. It’s not great, and we are taking conscious steps to improve, like sourcing diverse candidates, providing generous paid family leave, no leetcode interviews, and more. Interview Process At Ashby, our team and interview process want to help you show your best self. We’ll dive into past projects and simulate working together via pair programming, writing product and tech specs collaboratively, and talking through decisions. There are no leetcode or whiteboard exercises. Our interview process is three rounds: * Introduction call with Hiring Manager (15 to 30m, live) * A technical screen where we pair in our actual codebase (1h, live) * Three non-coding interviews that focus on product thinking, technical design, and infrastructure (3h 15m, live can be split across multiple days) Depending on our leadership team’s bandwidth, we may start with an additional 30m screen with a recruiter. Your hiring manager will be your main point of contact and prep you for interviews. Each round will have written guidance so you know what to expect (you’ll need minimal preparation). You’ll meet 4 to 6 people in engineering (with 5-15 minutes in each interview to ask them questions). If we don’t give an offer, we’ll provide feedback! Your First Three Months at Ashby We want an exceptional onboarding experience for every new hire. At Ashby, your dev environment is set up with a single script, you push your first product change on day one, and you spend the rest of your time shipping product changes that give you a tour of our codebase and best practices. The product changes increase in scope and ambiguity from simple copy changes to the delivery of a prominent, impactful feature. Your manager will do a 30, 60, and 90-day review to give feedback and calibrate on how we work together. It’s a team effort to get you successfully onboarded; you’ll have a peer paired with you to answer questions, pair program, and check in often to see if you need help. The rest of the team will run training sessions on our culture, product, engineering process, and technical architecture. Technology Stack I’m sharing our tech stack with the caveat that we don’t require previous experience in it (but a love of typed languages is helpful 😀): TypeScript (frontend & backend), React, GraphQL API, Node.js, Postgres, Redis. When they joined Ashby, many of our engineers switched from other languages like Swift and Kotlin (Ben), platforms like iOS (Tom) and Windows (Sergey). We care more about fundamentals (e.g., debugging, abstractions) and how fast you learn. For folks on the team who switched, it's nice seeing changes hot reload versus waiting for XCode to compile 😅. Benefits * Competitive salary and equity. * 10-year exercise window for stock options. You shouldn’t feel pressure to purchase stock options if you leave Ashby —do it when you feel financially comfortable. * Unlimited PTO, and we will encourage you to take it. * A minimum of 12 weeks of fully paid parental leave, covered by Ashby. For folks outside the US, it may be longer to be in line with regional requirements. * Generous equipment, software, and office furniture budget. Get what you need to be happy and productive! * $100/month education budget with more expensive items (like conferences) covered with manager approval. * If you’re in the US, we offer top-tier health insurance for you and your dependents, with 100% of premiums covered by Ashby. In other countries, we provide high-quality supplemental health insurance for you and your dependents, also fully covered by us. Ashby’s success hinges on hiring great people and creating an environment where we can be happy, feel challenged, and do our best work. We’re being deliberate about building that environment from the ground up. I hope that excites you enough to apply. Ashby provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetics, sexual orientation, gender identity, or gender expression. We are committed to a diverse and inclusive workforce and welcome people from all backgrounds, experiences, perspectives, and abilities. Compensation Range: $170K - $260K