Trabajos equipment operator en Boise, IdahoCrear alertas

Job Description Superior Blasting, Inc. is seeking blaster assistants. No experience needed! This is an entry level position that opens up training opportunities for equipment operator and blaster positions within the company. We provide advancement opportunities for hard workers and high performing individuals. By joining our team, we will work continually to balance your skill sets and passions that will contribute to the growth of our company. Job Responsibilities: • Assist blaster-in-charge in placing and detonating explosives used to loosen earth and rock, • Carry explosive bags, cartridges, powder, stemming material and other supplies to blasting area and deposit in previously drilled holes as directed, • Place earth, aggregate or drill cuttings (“stemming”) into holes after placement of charge, • Connect explosive cord to blasting cap and lead wire to firing device, • General job site clean-up, • Fills in for driller helper position as needed, • Ability to adjust to a variety of duties and willingness to perform any duties assigned, • Adhere to OSHA and MSHA safety policies and follow strict company safety protocols in order to maintain a safe work environment Requirements and Qualifications: • Must be 18 years of age or older, • Ability to carry 50 pound bags, boxes, or buckets, • Valid driver license with no DUIs, and no more than 3 moving violations and/or chargeable accidents, • Strong mechanical aptitude, attention to detail, and ability to work around heavy equipment, • Pass pre-employment drug test. We have a zero- tolerance drug policy, • Pass the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) background screening; must be felony free, • Must be able to work with a team, take direction from supervisors, communicate effectively, keep required work schedules, focus attention on detail, and follow work rules, • Capable of working in remote, loud, or varying weather conditions Bonus Qualifications, preferred not required: • Class A or B Commercial Driver License (CDL), • Department of Transportation (DOT) Medical certificate, • OSHA 10 and Hazmat certificates *Competitive pay; wage is based on experience \nCompany Description Superior Blasting Inc. is a precision drilling and blasting contractor with over 40 years of experience serving Idaho, Oregon, Washington, Nevada, and Utah. Founded in 1985 and headquartered in Boise, Idaho, we provide state-of-the-art drilling and blasting services to the construction, utility, pipeline, mining, and aggregate industries. Our team is fully licensed, insured, and compliant with OSHA, MSHA, and DOT regulations on every project. Superior Blasting Inc. is a precision drilling and blasting contractor with over 40 years of experience serving Idaho, Oregon, Washington, Nevada, and Utah. Founded in 1985 and headquartered in Boise, Idaho, we provide state-of-the-art drilling and blasting services to the construction, utility, pipeline, mining, and aggregate industries. Our team is fully licensed, insured, and compliant with OSHA, MSHA, and DOT regulations on every project.

Job Description Who We Are: Barminco forms part of the Perenti Group, a diversified global mining services company. Barminco can offer you opportunities to take your career to the next level as one of the world's largest hard-rock underground mining companies, with operations in Australia, Africa and North America. The Perenti Group operates across a wide range of mining sectors and offers unique career progression opportunities. Barminco is looking for dedicated people that are eager to start a career in underground mining and join our vibrant team. The collective talent and expertise of our people is the key to our success, and we are looking for talented people to join us. We seek to build teams who are loyal, committed to our values and dedicated to delivering for our clients. In return, we provide state of the art facilities, equipment, technology and exciting opportunities to work on projects around the world. Job Title: Haul Truck Operator The Opportunity: Barminco Mining Services has an exciting opportunity for a Haul Truck Operator to join our team at a project location 65 miles outside of Elko, Nevada. Reporting to the Shift Supervisor, the successful candidate will be responsible for hauling and dumping ore and waste material from development and production sources. Performing the assigned tasks while meeting safety standards, targets and deadlines to maximize productivity and profitability. Location: 65 Miles outside of Elko, Nevada Shift: 14-days on / 14-days off rotation Accommodation: Camp and meals provided. Key Responsibilities: • Demonstrate commitment to adhere to all Mine site safety rules, procedures and regulations, while ensuring the safety of others, • Safe and efficient operation of underground haul trucks to meet production targets, • Observe experienced workers to gain and increase knowledge of methods, procedures, and performance standards, • Document reports detailing work performed, problems diagnosed, pre checks on all equipment and machinery used in the day and all other required shift paperwork, • Immediately report problems/failures that may impact the team, or the company, to your Shift Supervisor, • Maintain and demonstrate a professional and courteous relationship with employees, subcontractors, the client and all other personnel, • Practice good general housekeeping in the work area and equipment, • Maintain a valid Driver’s License; manual transmission experience an asset, • Understand and comply with all PPE requirements in work areas, • Other duties may be assigned by your Supervisor, as required Qualifications: • Minimum High School Diploma or equivalency, • Minimum 1 year underground haul truck and/or equipment operation experience., • The ability to work both independently and within a team in a fast-paced, rapidly changing, cross-cultural environment with high degree of professionalism and self-motivation is essential, • Proven ability to recognize and follow verbal and written instructions, • Able to effectively prioritize workload to ensure deadlines are met, • Must have good radio etiquette and strong communications skills, • Eagerness to learn and grow Work Conditions: • Ability to do shift camp work on a rotational basis (dayshift/nightshift), typically the rotations are 2 weeks on site (minimum 12-hour days), followed by 2 weeks off – working statutory holidays as they fall within the rotation, • While performing the duties of this position, the employee is frequently required to communicate, sit, stand, walk, climb, reach, push/pull, manipulate objects and work in awkward positions, • Duties may involve moving materials weighing up to 50 pounds, • Manual dexterity and good eye-hand coordination are required, • Extreme weather conditions, • Noise level in the work environment is moderate to high What We Offer: • Competitive salary, paid time off and comprehensive benefits., • Opportunities for career development and advancement within the company., • A supportive, dynamic work environment focused on growth and success. Additional Information: The health and safety of our employees is our top priority. Selected candidates will be required to successfully complete a pre-employment Fit-for-Duty medical, including alcohol and drug screening.

Job Description Superior Blasting, Inc. is seeking a full-time bulk truck operator. By joining our team, we will work continually to balance your skill sets and passions that will contribute to the growth of our company. Job Responsibilities: • Operate trucks including but not limited to, bulk, water, dump, and end dump trucks, • Bring explosive products to the blast area, • Pump explosives into the boreholes or buckets, • Keep accurate records of inventory of products brought to the shot as well as products returned at the end of the day, • Perform truck inspections, maintenance, and small repairs as needed, • Efficiently keep up on all Department of Transportation (DOT) and company compliant paperwork, • Assist with blasting operations as needed, • Follow all Department of Transportation (DOT) regulations, • Take appropriate actions to avoid potential hazards or obstructions, such as utility lines, other equipment and workers, or falling objects, • Clean and prepare construction sites and work areas to eliminate possible hazards, • Able to adjust to a variety of duties and willingness to perform any duties assigned, • Adhere to OSHA and MSHA safety policies and follow strict company safety protocols in order to maintain a safe work environment Requirements and Qualifications: • Must be 18 years of age or older, • Class B Commercial Driver License (CDL) with Hazard, Airbrakes, and Tanker endorsements, • No DUIs, and no more than 3 moving violations and/or chargeable accidents, • Strong mechanical aptitude, attention to detail, and ability to work around heavy equipment, • Pass pre-employment drug test. We have a zero- tolerance drug policy, • Pass the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) background screening; must be felony free, • Must be able to work with a team, take direction from supervisors, communicate effectively, keep required work schedules, focus attention on detail, and follow work rules, • Capable of heavy lifting and working in remote, loud, or varying weather conditions Bonus Qualifications, preferred not required: • Able to operate a manual transmission, • Class A CDL, • Department of Transportation (DOT) Medical certificate, • OSHA 10 certificate *Competitive pay; wage is based on experience \nCompany Description Superior Blasting Inc. is a precision drilling and blasting contractor with over 40 years of experience serving Idaho, Oregon, Washington, Nevada, and Utah. Founded in 1985 and headquartered in Boise, Idaho, we provide state-of-the-art drilling and blasting services to the construction, utility, pipeline, mining, and aggregate industries. Our team is fully licensed, insured, and compliant with OSHA, MSHA, and DOT regulations on every project. Superior Blasting Inc. is a precision drilling and blasting contractor with over 40 years of experience serving Idaho, Oregon, Washington, Nevada, and Utah. Founded in 1985 and headquartered in Boise, Idaho, we provide state-of-the-art drilling and blasting services to the construction, utility, pipeline, mining, and aggregate industries. Our team is fully licensed, insured, and compliant with OSHA, MSHA, and DOT regulations on every project.

Weyerhaeuser has been in business for more than 120 years, and our strong foundation of values guides everything we do. Our people are our most valuable assets, and we’re serious about safety — there’s nothing more important than making sure every employee goes home safely each day. We are driven to achieve excellence and proud of what we do, and we strongly support and value different backgrounds and voices. With Weyerhaeuser, you’ll join a community where everyone has opportunities to develop and grow throughout their careers. Weyerhaeuser Boise Distribution Center is currently seeking a Forklift Operator. Under the direction of the Site Operations Manager and designated leaders, this position is responsible for all activities associated with the movement and handling of materials related to the wood products yard/warehouse. The wage for this position is $20.30 - $22.75 per hour. This is a first shift position, Monday – Friday, 8:00am – 5:00pm. Key Functions: • Safely operate and maintain propane or gas forklift to move products from stock lines to staging and/or cut stations, • Safely load and unload products, • Ensure accountability for personal safety and the safety of others by addressing any unsafe practices observed, • Wear all personal protective equipment required, • Accurately perform basic math skills such as adding, subtracting, and multiplying, • Accurately count units, record totals and document shipping and receiving activities, • Develop in depth knowledge of building material products and warehouse operations, • Be highly attentive and adaptive to workflows., • Commit to quality, efficiency, and continuous process improvement. This is not an inside warehouse position. This role will perform manual labor 55- 65% of the time. Qualifications • High school diploma or GED, • A positive willing to learn attitude, • Ability to lift up to 50 pounds and move or slide up to 100 pounds, • Must be able work outside in the elements five days a week and on rare occasions Saturdays, depending on business needs, • Computer skills: SAP or other Warehouse Management Systems, preferred, • Ability to work cohesively in a team environment with strong attention to detail and accuracy What will make you stand out:, • Building materials distribution work experience/ background, preferred, • Forklift Operator experience preferred. About Wood Products We've been delivering quality building products and solutions to our customers for more than 100 years. From builders and dealers to specifiers and homeowners, we offer exceptional product performance and unparalleled support. For more than a century, we’ve been building our reputation as a leader in sustainable wood products. About Weyerhaeuser We sustainably manage forests and manufacture products that make the world a better place. We’re serious about safety, driven to achieve excellence, and proud of what we do. With multiple business lines in locations across North America, we offer a range of exciting career opportunities for smart, talented people who are passionate about making a difference. We know you have a choice in your career. We want you to choose us. Weyerhaeuser is an equal opportunity employer. Inclusion is one of our five core values and we strive to maintain a culture where all our people feel a sense of belonging, opportunity and shared purpose. We are committed to recruiting a diverse workforce and supporting an equitable and inclusive environment that inspires people of all backgrounds to join, stay and thrive with our team. #hourly Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Summary: The Machine Operator II performs set-ups, makes minor adjustments and operates packaging equipment. Identifies acceptable or unacceptable product quality per customer requirements. Performs wash and changeover of equipment. Machine Operators will need to be reliable and able to work with Good Manufacturing Practices (GMP’s) at all times. Shift Schedule: 2-2-3 schedule, alternating weekly. Day Shift: 6:00 AM - 6:30 PM Or Night Shift: 6:00 PM - 6:30 AM Job Duties and Responsibilities: • Performs accurate set ups on equipment in preparation for particular product runs., • Operates equipment and adjusts as necessary to ensure equipment is operating correctly and meeting quality specifications., • Inspects and tests packages, and documents results to ensure equipment is operating correctly and meeting quality specifications., • Stages and checks required materials for quick and accurate change overs in production., • Completes and assembles all required documentation associated with the position., • Maintains works area in a clean and organized manner., • Performs all other duties as assigned. Minimum Qualifications: • High school diploma or equivalent is preferred., • Must be 18 years of age., • Must be knowledgeable in GMPs and the HACCP program or willing to learn., • Sufficient math skills to calculate quantities of material required for orders being run., • Good organizational and communication skills in order to prioritize work and communicate changes to line workers., • Must have the ability to handle small tools., • Must have the ability to understand and follow all safety policies and procedures., • Ability to read and write in English preferred. Work Environment and Physical Requirements: • Manufacturing environment - exposure to a variety of machines, noise levels, and varying temperatures., • Depending on which location, our environments can be very warm or refrigerated., • Team environment - must be able to work well with others and communicate in a respectful and professional manner., • Ability to stand up to 80% of the time scheduled, • Ability to lift 40 lbs. unassisted and 40-75 lbs. assisted., • Must be able to work necessary overtime based on staffing needs and customer demand, as well as across shifts. Benefits in just 30 days! Your health and well-being is important to us at Maker's Pride. Full-time employees can access medical, dental, and vision benefits after just 30 days of employment. Plus, our comprehensive benefits package includes a 401(k), wellness benefits, and other programs, subject to applicable eligibility requirements. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer. #HiringatMakersPride Maker's Pride is an Equal Opportunity Employer.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Maintains water production and quality for public consumption. Monitors daily system demand along with influencing factors such as weather and seasonality. Controls system pressure, monitors booster stations and storage facilities, and observes treatment conditions. Operates and maintains water treatment plants and well systems to support a Class IV water system. Operates on-site and using Supervisory Control and Data Acquisition systems and other technology in the most efficient manner. Performs basic troubleshooting, installation, maintenance, and repair of mechanical, electrical, pumping and other equipment and facilities associated with water production, treatment and control. System operates 24-7 and during peak season, Treatment Operators working in the plants will be required to cover shift work as needed or assigned. Primary Duties/Responsibilities: • Conducting routine water testing and recording test results., • Monitoring all charts, gauges, digital screens, and other operating equipment., • Calculating the chemical feed rate required, calibrating feed equipment, and adjusting feed rate per lab tests or supervisor instructions., • Performing and recording routine and special installation, maintenance and/or repair of all equipment and grounds and maintaining good housekeeping procedures., • Analyzing system parameters and determining when additional help is required (e.g. a main break)., • Monitoring appropriate chemical inventory levels., • Operating water treatment plants, wells and ancillary equipment using SCADA control interfaces., • Takes direction from company water quality personnel regarding water sampling, schedules, handling and the like., • Perform basic troubleshooting, installation, maintenance, and repair of mechanical, electrical, pumping and other equipment and facilities associated with water production, treatment and control., • Uses digital tools, (computer, laptop, tablet, smart phone, etc.) devices and software to communicate, and perform and record work., • Other duties as assigned., • Taking various shift assignments and on-call duty on a regular, rotational basis., • Perform all job responsibilities and duties in compliance with all safety, health, environmental, and security laws, rules, policies, programs and training. Work Environment: • Work outside in all kinds of weather., • These employees work indoors on concrete constantly and outdoors frequently, (outdoor conditions can be wet, muddy and slippery with extremes of heat and cold temperatures).Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Previous experience in water production and/or water treatment operation roles preferred. Knowledge/Skills/Abilities: • Ability to read, interpret, comprehend, and communicate contents of instructions, technical manuals, engineering plans and the like., • Ability to use heavy equipment and various hand, gas, electric and hydraulic tools., • Basic knowledge of water system operations, basic construction, and plumbing applications and practices, including disinfection, disinfection bi-products, and corrosion control., • Ability to perform basic troubleshooting, installation, maintenance, and repair of mechanical, electrical, pumping and other equipment and facilities associated with water production, treatment and control., • Ability to accurately distinguish between colors or discern color coding., • Good communications skills, both oral and written., • Good organization, interpersonal, and problem-solving skills., • Ability to function in the digital world, using computer, laptop, tablet, smartphone devices and software to communicate and perform and record work., • Proficiency with business office computing systems. Required Certification/Licenses/Training: • Must possess and maintain a valid state driver’s license., • Must hold and maintain an Idaho Drinking Water Treatment license., • Must have the ability to obtain and maintain a level II within one year of eligibility. Physical Requirements: • The Operator requires frequent standing and frequent walking., • Working at heights is required occasionally, (upon equipment, ladders, and lifts)., • Lifting/carrying is performed independently and as a team, occasionally, with up to 51 lbs. for dry membranes, removing hatch from roof, lid off pressure reducing valve, and bags of salt (50 lbs.), • Pushing and pulling up to 94 lbs. is required occasionally for removing/installing membranes, turning valves, and pulling oil hose., • Fine motor dexterity is required occasionally for removing O rings, taking bacteriological and chlorine residual samples, checking suction head, checking compressor, tool manipulation, recording data, using keyboard, keypad security and using phone for work orders., • Frequent crouching, kneeling, stooping/bending and twisting is performed with occasional lying down or crawling to work at/below grade level., • Reaching is performed at trunk level and above shoulder level frequently., • Driving is performed frequently, involving route reading and routine oil changes and maintenance., • Physical ability/dexterity to perform maintenance/repairs. Additional Information Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description NxEdge is a world class company providing vertically integrated solutions to the Semiconductor market. Our expertise in Engineering Material Coatings (EMC) allows global leading chip manufacturers and OEM equipment makers to achieve next generation technologies. We are seeking a driven, hands-on Production Operator to join our ever-growing company and team. Role and Responsibilities (includes but not limited to): • Load and run parts on various production machine tools, • Ensure all parts produced meet quality specs, • Ability to work within very close tolerances, • Read and follow drawings & job work instructions, • Perform routine machine maintenance, • Monitor tool wear, load tools and inserts as required Requirements: • Candidate will possess strong communication skills, • Have excellent work ethic; being open to working overtime if the need arises, • Can work in a fast-paced environment, and meet time deadlines, • Must be willing to learn to read and understand drawings and measuring equipment, • Basic computer skills such as e-mailing, open & print documents, and navigating windows/internet explorer., • Attendance Physical Demands: • Ability to lift 35 pounds by self in safe manner, • Ability to use lifting assist EEO Statement: NxEdge, Inc. is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

Job DescriptionProduction Operator B and D Foods Bring your attention to detail and team spirit-we'll put them to work! Join B and D Foods and help make quality food products from start to finish. As a Production Operator, you'll play a hands-on role in preparing, cooking, inspecting, and packaging our products. If you enjoy active work, take pride in doing things right, and work well with a team, we'd like to hear from you. What You'll Do Prepare our products: Cut whole-muscle proteins to the required size and remove excess fat, bones, and cartilage. Operate production equipment: Run shakers, tumblers, mixers, and packaging equipment while following established procedures. Help ensure quality: Inspect products, separate cooked pieces, break up clusters, and remove pieces that don't meet quality standards. Package finished products: Fill bags, bulk totes, and boxes; pack outer cases; and stack finished cases onto pallets for shipping. Keep records accurate: Record lot numbers, best-by dates, and other production information, and confirm boxes are labeled correctly. Stay alert: Report unusual equipment noises, changes on the line, and potential foreign material or contamination. Keep things clean: Maintain a clean work area and help wash equipment during protein changeovers. Follow food safety standards: Follow all Good Manufacturing Practices (GMPs) and Standard Operating Procedures (SOPs). What You'll Bring A high school diploma or equivalent. Good communication skills and a dependable, team-focused attitude. Attention to detail and a commitment to quality. Ability to perform job duties that may include repeatedly lifting 25 pounds. Availability for occasional overtime. Previous food manufacturing experience is preferred. What's in It for You? B and D Foods offers competitive pay and a comprehensive benefits package, including: Health and dental insurance. A 401(k) savings plan with employer match. Profit sharing. Free food! Ready to help make products you can take pride in? Apply today! B and D Foods is an Equal Opportunity Employer. We welcome diverse backgrounds, experiences, and perspectives and are committed to creating an inclusive workplace. Job Posted by ApplicantPro

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: This is a physically strenuous role that requires frequent standing and walking while outdoors, often in wet, muddy, and slippery conditions and at times in periods of extreme heat and cold. Materials and tools handled throughout the workday include but are not limited to hand shoveling dirt, gravel, large rock spoils, and broken concrete and asphalt. Responsible for restocking vehicle inventory and preparing job site(s) daily. Installs, repairs, maintains and operates water distribution system assets, facilities, grounds and associated equipment. Primary Duties/Responsibilities: • Maintains water distribution system by repairing, tapping and installing mains and service lines, installing and maintaining valves, hydrants, blow-off, mains, meters and service lines, and performing flushing activities., • Provides excavation restoration in grass, sidewalks, roads, easements and rights of way., • Performs carpentry, painting and plumbing as necessary., • Performs flow tests, leak surveys, line locations, and field water quality tests., • Obtains various water samples and delivers them to the lab for analysis., • Maintains accurate records of work performed., • Locates water distribution facilities (mains, service lines, etc.)., • Concrete work; form, pour, and finish., • Welding and metal fabrication., • Uses digital tools, (computer, laptop, tablet, smart phone, etc.) devices and software to communicate, and perform and record work., • Must be available for overtime and to respond to emergencies., • Performs all job responsibilities and duties in compliance with all safety, health, environmental, and security laws, rules, policies, programs and training., • Other duties as assigned. Work Environment: • Ability to stand and walk while working outdoors, often in wet, muddy, and slippery conditions and at times in periods of extreme heat and cold is required. Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Proven related construction experience., • Water utility pipeline and heavy equipment experience preferred., • Field operations, field customer service, and/or water distribution system work experience preferred. Knowledge/Skills/Abilities: • Basic knowledge of groundwater distribution system., • Ability to work with heavy equipment and various hand, gas, electric and hydraulic tools., • Ability to read, comprehend, and interpret maps, design construction plans and use appropriate tools and methods to determine grades and measurements, • General skill and knowledge of carpentry, concrete, painting and plumbing., • Ability to function in the digital world, using computer, laptop, tablet, smart phone devices and software to communicate and perform and record work., • Ability to use GPS and GIS for data access and information collection, • Proficiency with business office computing systems., • Excellent communications skills, both oral and written., • Excellent organization, interpersonal, and problem solving skills. Required Certification/Licenses/Training: • Must possess and maintain a valid state driver’s license (Class A CDL with appropriate endorsements or restrictions)., • Appropriate state license in distribution operation (Idaho Drinking Water Distribution Class II), or ability to obtain within 1 year after the minimum time frame as established by the Idaho State Board of Drinking Water and Wastewater Professionals., • Current CDL Class A., • Current drinking water distribution license holder preferred. Physical Requirements: • Lifting/carrying up to 50 lbs. and on an occasional basis up to 90 lbs., • Pushing is required frequently up to 109 lbs. and occasionally up to 185 lbs., • Hand shoveling, use of a digging bar, and jack hammering is performed frequently, and occasional use of a compactor., • Heavy equipment operation, (backhoe, track loader, dump truck, excavator) may require sitting up to 4-8 hours., • Climbing of ladders and up/down from equipment is performed occasionally., • Frequent crouching, kneeling, stooping/bending and twisting is performed with occasional lying down or crawling to work below grade and in compact spaces, while wrenching, levering, and manipulating hand tools., • Reaching is performed frequently below shoulder level and occasionally at shoulder level/above. Additional Information Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Controls Engineer Boise, ID – Nampa, ID Direct role, $80k-$120k, $100k is the sweet spot, Hybrid, Full Bene’s, Bonuses, ESOP, profit sharing, ENR top 500 Engineering systems integration company works on automation and control system projects for clients in industries such as life sciences, water/ wastewater, data centers, manufacturing, semiconductor facilities, building automation, food and beverage, etc. OVERVIEW The role entails DCS/ PLC/ SCADA/ HMI programming, hardware design, network architecture design, instrumentation/ electrical design, check-out/ start-up support, etc. ROLE/ RESPONSIBILITIES • Develop process control system software and hardware, including DCS, PLC, HMI, SCADA programming and design., • Design, develop, and implement control system logic software and hardware to meet process, machine, and integrated system requirements., • Develop control logic software and user interface applications., • Develop schematics detailing control system configuration and wiring, and design equipment panel layouts on AutoCAD software. REQUIRED/ HIGHLY PREFERRED EXPERIENCE • BSEE or similar with 2+ yrs experience, • PLCs, HMIs, SCADA, and field instrumentation, • Ladder logic, structured text, or function block diagram, • DCS - Siemens SIMATIC PCS 7, CFC and SFC, and AS 410 / S7-400H, • PROFIBUS PA/DP, PROFINET, and redundant industrial networks, • PCS 7 OS / WinCC operator systems, • read a design input documentation including PFDs, P&IDs, I/O list, control narratives, cause & effect diagrams, control panel layouts, testing acceptance criteria, etc., • Electrical schematics, Power Distribution, Control panels, and process control narratives, NEC Code, • Implementing/ testing/ commissioning/ qualifying automation solutions, • various S7 modules, AVEVA SCADA, network design, virtualization, controller migration (all a Bonus)

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: This is a physically strenuous role that requires frequent standing and walking while outdoors, often in wet, muddy, and slippery conditions and at times in periods of extreme heat and cold. Materials and tools handled throughout the workday include but are not limited to hand shoveling dirt, gravel, large rock spoils, and broken concrete and asphalt. Responsible for restocking vehicle inventory and preparing job site(s) daily. Installs, repairs, maintains and operates water distribution system assets, facilities, grounds and associated equipment. Primary Duties/Responsibilities: • Maintains water distribution system by repairing, tapping and installing mains and service lines, installing and maintaining valves, hydrants, blow-off, mains, meters and service lines, and performing flushing activities., • Provides excavation restoration in grass, sidewalks, roads, easements and rights of way., • Performs carpentry, painting and plumbing as necessary., • Performs flow tests, leak surveys, line locations, and field water quality tests., • Obtains various water samples and delivers them to the lab for analysis., • Maintains accurate records of work performed., • Locates water distribution facilities (mains, service lines, etc.)., • Concrete work; form, pour, and finish., • Welding and metal fabrication., • Uses digital tools, (computer, laptop, tablet, smart phone, etc.) devices and software to communicate, and perform and record work., • Must be available for overtime and to respond to emergencies., • Performs all job responsibilities and duties in compliance with all safety, health, environmental, and security laws, rules, policies, programs and training., • Other duties as assigned. Work Environment: • Ability to work with heavy equipment and various hand, gas, electric and hydraulic tools., • Ability to stand and walk while working outdoors, often in wet, muddy, and slippery conditions and at times in periods of extreme heat and cold is required.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Proven related construction experience., • Water utility pipeline and heavy equipment experience preferred., • Field operations, field customer service, and/or water distribution system work experience preferred., • Basic knowledge of groundwater distribution system. Knowledge/Skills/Abilities: • Ability to read, comprehend, and interpret maps, design construction plans and use appropriate tools and methods to determine grades and measurements., • General skill and knowledge of carpentry, concrete, painting and plumbing., • Ability to function in the digital world, using computer, laptop, tablet, smart phone devices and software to communicate and perform and record work., • Ability to use GPS and GIS for data access and information collection., • Proficiency with business office computing systems., • Excellent communications skills, both oral and written., • Excellent organization, interpersonal, and problem-solving skills. Required Certification/Licenses/Training: • Must possess and maintain a valid state driver’s license (Class A CDL with appropriate endorsements or restrictions)., • Appropriate state license in distribution operation (Idaho Drinking Water Distribution Class II), or ability to obtain within 1 year after the minimum time frame as established by the Idaho State Board of Drinking Water and Wastewater Professionals., • Current CDL Class A., • Current drinking water distribution license holder preferred. Physical Requirements: • Ability to frequently lift and carry up to 50 lbs. and occasionally up to 90 lbs. is required., • Ability to pull frequently up to 109 lbs. and occasionally up to 185 lbs. is required., • Ability to push frequently up to 58 lbs. and occasionally up to 95 lbs. is required., • Ability to climb up and down ladders and from equipment is required occasionally., • Ability to frequently crouch, kneel, stoop, bend, and twist is required., • Ability to occasionally lay down or crawl to work below grade and in compact spaces while wrenching, levering, and manipulating hand tools is required., • Ability to frequently reach below shoulder level and occasionally at shoulder level and above is required. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Position Summary: Fabricates piece parts based on engineering models using CNC equipment. 4 days a week 10 hours per day Essential Duties and Responsibilities: • Operate CNC machines for production., • Inspect parts before, during and after machining., • Maintain CNC machines per operator-level requirements. (not full preventive maintenance), • Maintain neat and organized workspace. Competencies: To perform the job successfully, an individual should demonstrate the following: • Communications - Exhibits good listening and comprehension. Able to deliver needed information to fellow machinists during shift change-over, • Customer Service - Displays courtesy and sensitivity. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service., • Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions., • Planning & Organization - Uses time efficiently. Works in an organized manner., • Quality - Fosters quality focus in others. Improves processes., • Use of Technology - Adapts to new technologies. Demonstrates required skills., • Lean Manufacturing – Exercises a commitment to driving value and eliminating waste. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: • Experience operating CNC mills or lathes, • Ability to read and interpret blueprints and drawings, • G and M code knowledge is recommended, • Ability to use various measurement tools, including but not limited to calipers and micrometers, • Experience with Haas, Okuma, and Mori controls is recommended. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is typically required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Concrete Superintendent LaRiviere, Inc. - Boise, ID Full-Time Bridge experience is our top priority. LaRiviere, Inc. is seeking an experienced Concrete Superintendent to lead bridge, structural concrete, and civil construction work in Boise and surrounding Southern Idaho communities. This is a field leadership position requiring strong technical knowledge, effective crew management, and the ability to plan and execute work safely, efficiently, and to project specifications. Applicants should bring direct experience supervising bridge concrete operations and a willingness to assist with fieldwork when needed. Primary Job Functions • Plan and oversee daily concrete operations, coordinating manpower, equipment, materials, and subcontractors for efficient use of resources., • Supervise foremen, concrete carpenters, finishers, and laborers while setting clear expectations for safety, quality, productivity, and accountability., • Lead bridge and structural concrete work, including footings, foundations, abutments, piers, walls, and bridge decks, as applicable to project scope., • Oversee layout, formwork installation and bracing, reinforcing steel, embeds, concrete placement, finishing, curing, and form removal., • Read and interpret plans, specifications, shop drawings, grades, and elevations., • Coordinate concrete deliveries, pump trucks, inspections, and pre-pour readiness., • Develop look-ahead schedules, monitor production, and adjust resources to meet project schedules and budgets., • Identify field conflicts and changes promptly; coordinate resolution with project management before proceeding with affected work., • Represent LaRiviere professionally with customers, subcontractors, engineers, inspectors, and municipalities., • Collaborate with the Safety Director, enforce safe work practices, and train personnel on job-specific hazards., • Operate construction equipment safely and assist with operator or labor duties as needed. Qualifications and Expectations • Demonstrated bridge construction experience required, with direct leadership of bridge concrete operations., • Minimum five years of leadership experience on heavy highway construction projects, including substantial concrete and structural work., • Minimum seven years of heavy equipment operating experience, with the ability to operate a variety of construction equipment safely., • Strong working knowledge of concrete forming systems, reinforcing steel, placement, finishing, curing, and construction sequencing., • Ability to read construction plans and translate project requirements into clear field direction., • Experience scheduling crews and equipment, tracking production, and coordinating multiple work activities., • Valid driver’s license with a clean driving record., • Reliable transportation to assigned jobsites and willingness to travel regionally as projects require., • Computer skills and ability to maintain accurate electronic project records., • Strong work ethic, dependable attendance, and clear communication., • Ability to lead by example, maintain an organized jobsite, and address performance or safety concerns promptly Daily Duties • Arrive prepared to organize crews and begin scheduled work on time., • Perform jobsite walk-throughs and verify operators complete daily equipment inspections., • Facilitate safety meetings and communicate daily assignments, hazards, and production goals., • Monitor workmanship and verify required inspections occur before concrete placement., • Communicate progress, resource needs, schedule concerns, and field changes to project management., • Report safety concerns promptly and take appropriate action to address hazards., • Complete daily reports and accurately record employee time, job duties, and equipment usage in Bid2Win., • Maintain clean equipment and orderly work areas. Physical Requirements and Working Conditions Applicants must be able to perform the essential functions of the position with or without reasonable accommodation. This position involves outdoor work in varying weather and jobsite conditions, including exposure to dust, fumes, noise, and moving equipment. Duties require frequent bending, climbing, sitting, pushing, pulling, grasping, and fine manipulation. Employees may lift up to 50 pounds and occasionally up to 100 pounds with assistance. The superintendent will assist with manual labor as needed. Compensation and Benefits LaRiviere offers competitive compensation dependent on experience and a benefits package including medical insurance, paid holidays, PTO, and a 401(k), subject to eligibility and plan terms. Medical premium contributions vary by employment classification. LaRiviere, Inc. is an Equal Opportunity Employer All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, genetic information, sexual orientation, gender, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. All LaRiviere, Inc. subcontractors and vendors agree they will abide by the equal opportunity provisions of 41CFR 60-1.4.

Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As an E&I Engineer you will be responsible for; • Read, interpret and comment on engineering documents, including P&IDs, GAs, process design guidelines, return of experience, and engineering best practices guides., • Interpret, comment and follow contract and customer specifications., • Perform required calculations and select the appropriate instrumentation for water treatment facilities as well as all supporting documentation (instrument lists, termination drawings, instrument datasheets, etc.) with operator and equipment safety in mind., • Manage budget, scope, schedule and proactively report risks and opportunities to project teams., • Select equipment and design complex low voltage industrial control systems in compliance with UL and CEC for water treatment facilities, some with Class 1 Div 2 areas, (single line diagrams/load lists, I/O lists, panel design and schematics, and network architectures) with operator and equipment safety in mind with high quality., • Support project bids, provide technical guidance to meet customer needs, • Ability to collaborate in and lead cross-functional project team discussions and client meetings., • Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards., • Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and system Qualifications; • Experience with design of complex low voltage industrial control systems in compliance with UL and CEC, • Experience designing control panels and selecting equipment for use in Class 1 Div 2 areas, • Excellent problem-solving abilities., • Excellent written and verbal communication skills (including coordinating, reporting, documentation, and presentations), • Bachelor of Electrical Engineering or equivalent degree., • Experienced with complex industrial control system design., • Minimum of 10 years of relevant or related experience., • Valid passport and driver's license. Preferred: • Understanding of hydraulics and fundamentals of fluid mechanics., • Understanding of basic water chemistry., • Strong focus on customer relationships (external/internal). Understands balance between customer and SUEZ teams., • Experience with control systems, Programmable Logic Controllers, HMI and SCADA design and programming., • Basic technical knowledge in the field of industrial control systems., • Understanding of Low Voltage Power Distribution System design. Working Conditions: Occasional travel (15%) for client meetings, customer site visits and/or visits to other offices Salary Range: $90k-$140k The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Job Description Senior Mechanical Engineer with a Focus on Mechatronics Role Overview We are seeking an experienced Senior Mechanical Engineer – Mechatronics to lead the design, development, integration, and commissioning of complex electro-mechanical systems used in advanced automated manufacturing equipment. This is a highly hands-on, multidisciplinary engineering role that combines mechanical design, pneumatics and hydraulics, motion control, industrial electrical systems, PLC/HMI programming, and equipment integration. The Senior Mechanical Engineer – Mechatronics will collaborate closely with the Senior Automation Engineer, manufacturing, engineering teams, equipment suppliers, and system integrators to develop reliable, scalable, and highly automated manufacturing solutions. The ideal candidate is a strong mechanical engineer with the ability to work across traditional engineering boundaries, taking equipment and subsystems from concept and detailed design through programming, integration, commissioning, troubleshooting, and production support. Key Responsibilities • Design and develop mechanical and electro-mechanical systems, mechanisms, fixtures, actuators, machine assemblies, and automated equipment., • Create and maintain detailed 3D CAD models, engineering drawings, GD&T specifications, tolerance analyses, and bills of materials (BOMs)., • Design, specify, and integrate pneumatic and hydraulic systems for automated manufacturing equipment., • Size, select, and integrate motors, servo systems, actuators, sensors, valves, motion components, and other machine hardware based on performance and application requirements., • Partner with automation and electrical engineering resources to support electrical controls design, wiring, I/O architecture, system integration, and troubleshooting., • Develop and maintain machine and subsystem control logic using Structured Text and IEC 61131-3-based programming platforms, including sequencing, interlocks, diagnostics, alarms, and fault-handling strategies., • Develop intuitive Human-Machine Interfaces (HMIs) for equipment operation, status monitoring, alarm management, diagnostics, and troubleshooting., • Design, build, test, and evaluate prototypes and production equipment to validate performance, reliability, safety, and manufacturability., • Perform structured troubleshooting and root-cause failure analysis across mechanical, electrical, pneumatic, hydraulic, and controls systems., • Provide hands-on support during equipment assembly, installation, I/O checkout, startup, commissioning, validation, and production ramp-up., • Develop and maintain engineering documentation, including drawings, specifications, commissioning procedures, technical manuals, work instructions, and troubleshooting guides., • Collaborate with suppliers, machine builders, system integrators, manufacturing personnel, and multidisciplinary engineering teams to ensure equipment meets technical and operational requirements., • Support continuous improvement initiatives focused on equipment reliability, uptime, cycle time, quality, safety, and manufacturability. Required Qualifications • Bachelor’s degree in Mechanical Engineering, Mechatronics Engineering, or a closely related engineering discipline., • Minimum of 5 years of progressive engineering experience in mechanical design, mechatronics, automation, manufacturing equipment, or a related industrial environment., • Strong experience designing mechanical and electro-mechanical systems using 3D CAD software., • Demonstrated knowledge of GD&T, tolerance analysis, engineering drawings, BOM development, and component selection., • Hands-on experience working with pneumatic, hydraulic, servo/motion, sensor, actuator, and automated machine systems., • Working knowledge of industrial electrical systems, machine controls, instrumentation, and I/O., • Experience programming PLC-based control systems using Structured Text and IEC 61131-3 platforms., • Experience developing and supporting industrial operator HMIs., • Demonstrated ability to troubleshoot complex systems involving mechanical, electrical, pneumatic, hydraulic, motion, and controls components., • Experience installing, integrating, starting up, and commissioning automated industrial equipment., • Strong analytical, problem-solving, organizational, and technical documentation skills., • Ability to work effectively across engineering disciplines and communicate technical information to both technical and non-technical stakeholders. Preferred Qualifications Experience with one or more of the following is highly desirable: • Allen-Bradley ControlLogix and Studio 5000, • FANUC or comparable industrial robotics platforms, • CNC equipment and automated machine-tool integration, • EtherNet/IP and industrial communication networks, • Machine safety systems, safety PLCs, interlocks, and risk-reduction controls, • Ignition or comparable SCADA platforms, • SQL databases and manufacturing data systems, • FEA, MATLAB/Simulink, or similar engineering analysis and simulation tools, • Highly automated, high-volume, or lights-out manufacturing environments What We’re Looking For We are looking for a mechanical engineer who approaches equipment development with a mechatronics mindset. The ideal candidate is comfortable taking ownership of an electro-mechanical subsystem throughout its lifecycle, from concept through production. This includes the ability to: • Design the mechanism and associated machine components., • Select appropriate mechanical, electrical, pneumatic, hydraulic, sensing, and motion-control components., • Understand and support the equipment's electrical and controls architecture., • Develop or modify control logic for machine subsystems., • Develop operator interfaces and diagnostic functionality., • Participate directly in equipment assembly and integration., • Commission equipment and troubleshoot complex system-level issues., • Document the final design and support its transition into manufacturing. The Senior Mechanical Engineer will primarily focus on overall automation architecture, system-level controls strategy, and orchestration of the manufacturing system. The Senior Mechanical Engineer – Mechatronics will provide technical ownership of the machines, mechanisms, motion systems, and electro-mechanical subsystems that make up the broader automated solution. Location & Travel • Position is based in Boise, Idaho., • The role will support engineering and equipment activities in Boise and Singapore., • Domestic and international travel is expected, potentially approximately quarterly over the next one to two years., • Certain assignments may require extended travel, with individual trips lasting up to approximately one month, depending on project, installation, and commissioning requirements. NxEdge is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

Job Description Job Position: Water Well Driller Location: Oahu and Kauai Pay: ($55,000 - $100,000 per year) based on experience Overview We are seeking a skilled and dedicated Drill Rig Operator to join our team in the water well industry located in Hawaii. The ideal candidate must have a strong mechanical background and experience with various drilling Methods (mud and air rotary) and experience with submersible pump installation. As a Driller, you will play a crucial role in the maintenance and operation of drilling equipment and ensure the safe and efficient execution of drilling projects. CDL is required. Forklift certification required. Duties Operate drilling rigs and associated equipment, ensuring compliance with safety regulations and OSHA standards. Perform routine maintenance on drilling equipment, including and support equipment. Maintain accurate records of drilling operations, including depth, and other relevant data. Apply housekeeping skills and have a positive work ethic to promote safety and efficiency. Please submit a resume. This is an opportunity to work throughout the state of Hawaii Job Type: Full-time Pay: negotiable based on experience 30 day evaluation period. Must have the ability to commute or relocate. Position available immediately. #hc195205

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Maintains water production and quality for public consumption. Monitors daily system demand along with influencing factors such as weather and seasonality. Controls system pressure, monitors booster stations and storage facilities, and observes treatment conditions. Operates and maintains water treatment plants and well systems to support a Class IV water system. Operates on-site and using Supervisory Control and Data Acquisition systems and other technology in the most efficient manner. Performs basic troubleshooting, installation, maintenance, and repair of mechanical, electrical, pumping and other equipment and facilities associated with water production, treatment and control. System operates 24-7 and during peak season, Treatment Operators working in the plants will be required to cover shift work as needed or assigned. Primary Duties/Responsibilities: • Conducting routine water testing and recording test results., • Monitoring all charts, gauges, digital screens, and other operating equipment., • Calculating the chemical feed rate required, calibrating feed equipment, and adjusting feed rate per lab tests or supervisor instructions., • Performing and recording routine and special installation, maintenance and/or repair of all equipment and grounds and maintaining good housekeeping procedures., • Analyzing system parameters and determining when additional help is required (e.g. a main break)., • Monitoring appropriate chemical inventory levels., • Operating water treatment plants, wells and ancillary equipment using SCADA control interfaces., • Takes direction from company water quality personnel regarding water sampling, schedules, handling and the like., • Perform basic troubleshooting, installation, maintenance, and repair of mechanical, electrical, pumping and other equipment and facilities associated with water production, treatment and control., • Uses digital tools, (computer, laptop, tablet, smart phone, etc.) devices and software to communicate, and perform and record work., • Other duties as assigned., • Taking various shift assignments and on-call duty on a regular, rotational basis., • Perform all job responsibilities and duties in compliance with all safety, health, environmental, and security laws, rules, policies, programs and training. Work Environment: • Work outside in all kinds of weather., • These employees work indoors on concrete constantly and outdoors frequently, (outdoor conditions can be wet, muddy and slippery with extremes of heat and cold temperatures).Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Previous experience in water production and/or water treatment operation roles preferred. Knowledge/Skills/Abilities: • Ability to read, interpret, comprehend, and communicate contents of instructions, technical manuals, engineering plans and the like., • Ability to use heavy equipment and various hand, gas, electric and hydraulic tools., • Basic knowledge of water system operations, basic construction, and plumbing applications and practices, including disinfection, disinfection bi-products, and corrosion control., • Ability to perform basic troubleshooting, installation, maintenance, and repair of mechanical, electrical, pumping and other equipment and facilities associated with water production, treatment and control., • Ability to accurately distinguish between colors or discern color coding., • Good communications skills, both oral and written., • Good organization, interpersonal, and problem-solving skills., • Ability to function in the digital world, using computer, laptop, tablet, smartphone devices and software to communicate and perform and record work., • Proficiency with business office computing systems. Required Certification/Licenses/Training: • Must possess and maintain a valid state driver’s license., • Must hold and maintain an Idaho Drinking Water Treatment license., • Must have the ability to obtain and maintain a level II within one year of eligibility. Physical Requirements: • The Operator requires frequent standing and frequent walking., • Working at heights is required occasionally, (upon equipment, ladders, and lifts)., • Lifting/carrying is performed independently and as a team, occasionally, with up to 51 lbs. for dry membranes, removing hatch from roof, lid off pressure reducing valve, and bags of salt (50 lbs.), • Pushing and pulling up to 94 lbs. is required occasionally for removing/installing membranes, turning valves, and pulling oil hose., • Fine motor dexterity is required occasionally for removing O rings, taking bacteriological and chlorine residual samples, checking suction head, checking compressor, tool manipulation, recording data, using keyboard, keypad security and using phone for work orders., • Frequent crouching, kneeling, stooping/bending and twisting is performed with occasional lying down or crawling to work at/below grade level., • Reaching is performed at trunk level and above shoulder level frequently., • Driving is performed frequently, involving route reading and routine oil changes and maintenance., • Physical ability/dexterity to perform maintenance/repairs. Additional Information Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Is accountable for results of the team, exercises limited management authority; setting employee performance objectives, conducts performance reviews, and defines team operating standards and ensures essential procedures are followed based on knowledge of own discipline. Plans, directs and oversees the overall operations of the production and treatment systems, which includes the maintenance of sources of supply, treatment plants and pumping stations, storage tanks, electrical and mechanical equipment and instrumentation to ensure the delivery of high-quality water at a reasonable cost. Ensures adequate supply of water to the distribution system to maintain minimum fire protection requirements and customer supply. Ensures that Company, governmental, and regulatory requirements and standards are consistently met. Primary Duties/Responsibilities: • Provide leadership to the production department on daily affairs., • Achieve customer service outcomes., • Ensures all safety and security regulations are policies are implemented and followed., • Ensure regulatory compliance is met at all times., • Develop departmental budget plans and effectively manages expenses and costs to ensure the most effective and efficient use of capital and operational funds for strategic growth and department function., • Complete periodic and annual performance reviews of direct reports and assist with indirect report reviews., • Coaches and develops staff to achieve full potential., • Ensures departmental compliance with OSHA and Company safety rules, policies, and procedures. Collaborates with EHS to establish and maintain a healthy safety culture and best practices within the department., • Cross departmental collaboration and coordination to ensure consistency and operational efficiency. When appropriate, ensure individual department decisions include the greatest collective benefit across all departments.Qualifications Education/Experience/Background: • Bachelor's degree in Engineering, Chemistry, Management or Technology, or equivalent experience., • 5 - 8 years of experience in a water utility with both well and surface production and treatment facilities., • Minimum 5 years related experience in a supervisory capacity., • Experience in a unionized work environment is preferred. Knowledge/Skills/Abilities: • Strong professionalism, independent judgment, and ability to work with all levels of staff, management, and organized labor groups within the organization., • Proven interpersonal and problem-solving abilities., • Strong knowledge of hydraulic principles., • Strong operational knowledge of wells, pumps, motors, and related equipment., • Strong operational knowledge of well and surface water treatment systems and methods., • Good understanding of chemistry for sampling and treatment procedures., • Good knowledge and understanding of water operations control systems; i.e. SCADA., • Strong knowledge of federal and state water quality regulations., • Thorough understanding of overall water systems operation., • Strong interpersonal skills., • Strong communication skills, both written and oral., • Strong knowledge of OSHA and Company environmental health and safety rules, policies, and procedures, including cross connection control., • Strong knowledge of federal, state, and local transportation rules., • Ability to function in the digital world, using computer, laptop, tablet, smartphone devices and software to communicate and perform and record work., • Proficiency with business office computing systems., • Ability to be available and respond to emergency situations., • Must be able to read complex reports and operational drawings., • Write detailed reports and prepare and deliver presentations., • Must be able to reason and analyze complex operational challenges and resolve the same., • Must be able to learn new technological advances in water industry and train personnel. Required Certification/Licenses/Training: • Idaho Class 4 Water Treatment Plant Operator's License is necessary and/or ability to acquire within 1 year., • Possess and maintain Valid state driver’s license. Physical Requirements: • Walking, including uneven terrain; climbing hills and stairs; sitting and standing for extended periods of time viewing computer screens and utilizing keyboard and mouse., • Must be able to see clearly, hear warning devices and alarms. Must be able to speak to give direction and converse with others. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Who We Are: Barminco forms part of the Perenti Group, a diversified global mining services company. Barminco can offer you opportunities to take your career to the next level as one of the world's largest hard-rock underground mining companies, with operations in Australia, Africa and North America. The Perenti Group operates across a wide range of mining sectors and offers unique career progression opportunities. Barminco is looking for dedicated people that are eager to start a career in underground mining and join our vibrant team. The collective talent and expertise of our people is the key to our success, and we are looking for talented people to join us. We seek to build teams who are loyal, committed to our values and dedicated to delivering for our clients. In return, we provide state of the art facilities, equipment, technology and exciting opportunities to work on projects around the world. Job Title: Underground Offsider The Opportunity: Barminco Mining Services has an exciting opportunity for an Underground Offsider to join our team at a project location 65 miles outside of Elko, Nevada. Reporting to the Underground Supervisor, the successful candidate will be responsible for assisting the mining team to achieve the daily targets while working closely with the underground operators, ensure all tasks are meeting safety standards, targets and deadlines to maximize productivity and profitability. Location: 65 Miles outside of Elko, Nevada Shift: 14-days on / 14-days off rotation Accommodation: Camp and meals provided. Key Responsibilities: • Demonstrate commitment to following all Mine site safety rules, procedures and regulations, while ensuring the safety of others., • Always act in a manner that seeks to enhance the safety culture and performance of Barminco., • Collect, deliver and ensure all necessary materials are delivered as and when required., • Assist Jumbo Operator to build ground support and perform boring operations underground such as the installation of rock bolts and mesh., • Set up headings for providing ground support using mesh, split sets, and resin bolts., • Observe experienced workers to gain and increase knowledge of methods, procedures, and performance standards; attain necessary skills to assist jumbo operator as required., • Assists with face preparation for drilling., • Assist with installation of ground support., • Coupling and decoupling of jumbo power cables., • Install lifter tube to lifters., • Display a high level of standard to housekeeping with LV’s, storage areas underground and work areas., • Install mine services and ventilation as required., • Conduct risk assessment of job tasks., • Record all shift report data correctly and on time (i.e. delays, locations, directions etc.)., • Document work performed, problems diagnosed, pre checks on all equipment and machinery used in the day and all other required paperwork., • Immediately report problems/failures that may impact the team, or the company, to your Shift Supervisor., • Maintain and demonstrate a professional and courteous relationship with employees, subcontractors, the client and all other personnel., • Understand and comply with all PPE requirements in work areas., • Other duties may be assigned by your Supervisor, as required. Qualifications: • Previous underground mining experience would be preferred., • Must maintain a valid Driver’s License; manual transmission experience an asset., • Self motivated and energetic - Enjoys hard work and highly physical roles., • Sound planning, time management and organizational skills., • To attend all designated rostered days, punctuality with shift start times, timely commencement of work activities. Arrive fit for work every rostered shift., • Willingness to be flexible and work in other roles., • Team work, willingness to cooperate with and learn from the team is a must., • The ability to work both independently and within a team in a fast-paced, cross-cultural environment with high degree of professionalism and self-motivation is essential., • Proven ability to recognize and follow verbal and written instructions., • Able to effectively prioritize workload to ensure deadlines are met., • Must have good radio etiquette and strong communications skills., • Eagerness to learn and grow., • Ability to pass a Pre employment medical and drug/alcohol test. Work Conditions: • Ability to do shift camp work on a rotational basis (dayshift/nightshift), typically the rotations are 14 week on site (minimum 12-hour days), followed by 14 week off – working statutory holidays as they fall within the rotation, • While performing the duties of this position, the employee is frequently required to communicate, sit, stand, walk, climb, reach, push/pull, manipulate objects and work in awkward positions, • Duties may involve moving materials weighing up to 50 pounds, • Manual dexterity and good eye-hand coordination are required, • Extreme weather conditions, • Noise level in the work environment is moderate to high What We Offer: • Competitive salary, paid time off and comprehensive benefits., • Opportunities for career development and advancement within the company., • A supportive, dynamic work environment focused on growth and success. Additional Information: The health and safety of our employees is our top priority. Selected candidates will be required to successfully complete a pre-employment Fit-for-Duty medical, including alcohol and drug screening.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Site Safety Manager is responsible for the safe and accident-free operation of their site. This includes identifying any potential safety hazards and implementing plans to prevent these dangers. Primary Duties/Responsibilities: • Coordinates and administers the Site Heath, Safety, environmental and Security Program for multiple locations., • Investigates unsafe conditions and incidents, performs plant safety, security and environmental inspections and coordinates the corrective actions towards resolution., • Ensure sites of responsibilities comply with Federal, State, Local & Veolia’s Health & Safety Standards., • Recognize potential hazards and risks by implementing daily, weekly, monthly walk throughs., • Conduct Monthly Safety Inspection Reports and track findings to closure., • Report hazards and regulatory concerns to Project Managers & Regional VP of Operations., • Ensure that all employees, subcontractors/vendors and visitors comply with applicable Veolia’s H&S policies & procedures., • Complete, track and investigate incident/injury reports, near misses., • Conduct root cause analysis investigations and develop corrective actions for all incidents., • Develop and review site-specific safety related written SOPs and Job Safety Analysis (JSA)., • Ensure H&S files (documentation) are maintained to include training records, equipment inspection logs, industrial hygiene evaluations, and procedures certifications., • Be accessible and visible to the employee population by monitoring, evaluating and addressing employee safety concerns and issues., • Coordinate and monitor monthly site safety committee meetings., • Deliver and distribute employee safety training requirements, safety alerts and monthly awareness, communications, concerns and suggestions., • Provide new employee and contractor safety orientations., • Ensure compliance and monitor requirements with the Process Safety Management (PSM) Standard., • Coordinate site specific emergency planning programs. Develop and review site emergency programs (fire, hurricane, chemical spills, etc.)., • Implement fire and emergency drills., • Participates and coordinates all visits of federal, state and insurance inspectors and follows up on their recommendations.Qualifications Education/Experience/Background: • Associate’s Degree or equivalent., • Bachelor’s degree in occupational or environmental health strongly preferred., • Experience in developing and coordinating safety programs and delivering safety training is a plus. Knowledge/Skills/Abilities: • Working knowledge of OSHA (Occupational Safety and Hazards Administration) regulations and requirements., • Working knowledge of State and Federal laws, local ordinances, and other rules and regulations associated with facility and employee safety and security., • Competent to implement site specific safety procedures; i.e.; Hazard Communication, Process Safety Management, Electrical Safety, Emergency Management plan, etc., • Must complete a physical fitness test to wear a respirator (if applicable) and any required safety equipment necessary to perform these duties., • Must demonstrate the ability to handle multiple tasks and changing priorities in a fast paced environment., • Requires competency with software applications including Word, Excel and PowerPoint with ability to download, manipulate and report data. Ability to learn other programs including Caribou, OPS32, MP-2 and Triple-I database software., • Must demonstrate effective communication skills (verbal, presentation and listening) to interact with all levels of personnel. Demonstrated ability to prepare accurate, effective, complete and easily understood written communications and reports., • Must be able to respond to emergencies at the plant during off hours and weekends. Required Certification/Licenses/Training: • Certified on first-aid and CPR., • Must have and maintain a valid driver’s license. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Senior Automation Engineer COMPANY AND ROLE CONTEXT NxEdge, an Enpro company, provides vertically integrated engineered materials, precision machining, surface technologies, cleaning, coating, and refurbishment solutions supporting the global semiconductor value chain. The Senior Automation Engineer reports to the Engineering Manager and provides hands-on technical ownership of automation design, programming, integration, commissioning, and continuous improvement for semiconductor component manufacturing. The role supports Small Hole Drilling and automated manufacturing systems, connecting equipment controls, robotics, manufacturing software, and production data to improve safety, reliability, quality, and throughput. This senior individual contributor partners with Engineering, Operations, Maintenance, Quality, IT, equipment suppliers, and system integrators to deliver maintainable solutions and disciplined cross-site deployment. OVERVIEW Serve as the senior technical resource for equipment automation, controls programming, manufacturing-system integration, and production troubleshooting. Translate manufacturing requirements into scalable automation solutions, controlled software releases, and measurable operating improvements. Support projects from requirements and concept development through testing, commissioning, qualification, training, and sustaining handoff. Promote process consistency and copy-exact discipline across Boise, Singapore, and other NxEdge sites as needed. JOB DUTIES Define automation requirements, functional specifications, equipment interfaces, acceptance criteria, project scope, cost estimates, and implementation schedules with cross-functional stakeholders. Design, develop, troubleshoot, and maintain PLC programs using structured logic programming, including IEC 61131-3 Structured Text, ladder logic, function blocks, modular routines, and state-machine sequencing. Develop and maintain HMI and SCADA applications, including operator interfaces, alarms, diagnostics, recipe controls, equipment status, and production data collection. Integrate CNC equipment, robots, material-handling systems, inspection equipment, sensors, and supporting factory systems using defined interfaces and communication protocols. Develop and support equipment-to-system connectivity with manufacturing execution, recipe management, databases, and business systems in partnership with IT and system owners. Lead software testing, factory and site acceptance testing, commissioning, and qualification support; document results and resolve issues before production release. Troubleshoot controls, software, communication, and equipment-sequencing failures; lead root cause analysis and corrective actions using structured methods such as 8D and 5-Whys. Analyze downtime, cycle time, equipment utilization, yield, and recurring faults to prioritize improvements in reliability, throughput, and operating cost. Maintain version-controlled source code, program backups, interface documentation, change history, test records, and recovery procedures; apply approved change-control and rollback practices. Coordinate suppliers and system integrators, review technical deliverables, clarify ownership, and escalate risks affecting safety, quality, cost, or schedule. Partner with qualified safety personnel to review equipment safeguards and validate authorized controls changes before release; follow applicable site safety and lockout/tagout requirements. Coordinate with IT on industrial networking, access control, software deployment, backups, and cybersecurity requirements. Develop training and troubleshooting documentation for engineers, technicians, and operators; support a clear handoff to Operations and Maintenance. Support controlled cross-site replication through common code baselines, configuration management, documentation alignment, and knowledge transfer. Provide technical mentoring and design reviews while demonstrating ownership, sound judgment, and the NxEdge values of Safety, Excellence, and Respect. SKILLS, ATTRIBUTES, KNOWLEDGE, AND EXPERIENCE Bachelor’s degree in electrical engineering, Controls Engineering, Automation, Computer Engineering, or related engineering field; master’s degree preferred. Demonstrated progressively responsible experience in industrial automation, equipment controls, and manufacturing-system integration, including independent technical ownership of complex projects. Required hands-on structured logic programming experience, including developing, debugging, and maintaining PLC Structured Text (IEC 61131-3), reusable function blocks, sequence logic, state machines, fault handling, and recovery routines. Proficiency with PLC, HMI, and SCADA development and troubleshooting; ability to read existing programs and implement documented, tested changes. Experience integrating automated equipment, robotics, motion systems, CNC machines, or inspection systems in a production environment. Working proficiency with Visual Studio, C#, .NET, SQL, and relational databases for equipment connectivity, manufacturing applications, and data analysis. Understanding industrial networks, equipment interfaces, electrical drawings, I/O, sensors, and control system diagnostics. Experience with software version control, code reviews, structured testing, backups, release documentation, and configuration management. Ability to manage concurrent projects, develop practical estimates, coordinate suppliers, and communicate technical risks and tradeoffs clearly. Demonstrated structured problem-solving skills, documentation discipline, and ability to translate equipment and production data into actionable improvements. PREFERRED EXPERIENCE Semiconductor component manufacturing, high-precision machining, Small Hole Drilling, or comparable automated manufacturing experience. Familiarity with SECS/GEM and SEMI automation standards where applicable to equipment integration. Experience with MES, recipe management, advanced process control, and enterprise automation applications on Windows or Unix platforms; Oracle database familiarity is beneficial. Experience with industrial communication technologies such as OPC UA, EtherNet/IP, PROFINET, or equivalent protocols. Experience supporting cross-site deployment, copy-exact manufacturing, controlled equipment changes, and knowledge transfer. Application of continuous improvement methods such as Six Sigma, Kaizen, 8D, and 5-Whys. WORK ENVIRONMENT AND PHYSICAL DEMANDS Work is performed in manufacturing environments, with regular shop-floor engagement during troubleshooting, testing, and commissioning. Requires access to production areas and work around manufacturing equipment, noise, and moving machinery in accordance with site safety requirements. Required personal protective equipment must be worn in designated areas. Physical requirements and any lifting expectations should be confirmed with Human Resources based on the essential functions of the role and applicable accommodation practices. NxEdge is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

Job Description B.H. Inc. is hiring Equipment Operators to support our directional drill crews. You'll work alongside the drill team, potholing to locate utilities, digging entry and exit pits, and keeping the bore on track. What's in it for you: • 30–40/hour depending on experience, with weekly pay, • Per diem on travel jobs, • Health, vision, dental, and life insurance, • 401k with company match, and paid time off, • 90-day performance review with potential pay or title adjustment Qualifications: • 2+ years operating excavators, mini-excavators, skid steers, or vac trucks, • Experience potholing and working safely around live utilities • Solid knowledge of trench and excavation safety, • Valid driver's license and clean driving record (MVR required) THIS IS A TRAVELING POSITION. PLEASE READ BEFORE APPLYING. • All crews meet at our laydown yard in Salt Lake City, UT and travel together in company trucks to job sites., • You are responsible for getting yourself to and from the SLC yard. That travel time is unpaid and not covered by per diem., • Crews stay out up to 4–5 weeks at a time, then come home for about a week (unpaid time off)., • Current and upcoming work: Milford, Heber, Zion, Panguitch, central Utah, Boise, Texas, and across the western U.S., • You have to enjoy life on the road. If you need to be home every night, this isn't the job for you. ABOUT B.H. INC. For over 50 years, BHI has grown from humble beginnings into a nationally recognized name in underground utilities and civil construction. Our mission is to be the most respected name in the industry through the dedication of our employees. We foster a family-oriented atmosphere where safety is a core value. Apply now through our 3-minute, mobile-friendly application! BHI is an EEO employer, including disability and vets. Applicants must be authorized to work in the U.S. We cannot provide visa sponsorship at this time. #INDSJ3 Job Posted by ApplicantPro

Job Description About Walsh Reclamation Walsh Reclamation is a locally owned and operated company with over 75 years of combined experience in the mining and reclamation field. Since 1992, we've supported hundreds of projects across Nevada. Our modern equipment and dedicated team allow us to deliver efficient, safe, and environmentally responsible work. From drill site and road construction to reclamation and land restoration, we are committed to doing the job right. Our home office is based in Elko, Nevada, with job sites located throughout the state. Candidates should be prepared to travel to various job sites across Nevada as work assignments require. Position Summary Operates heavy machinery — including excavators, bulldozers, motor graders, backhoes, skid steers, and loaders — to excavate, grade, and move earth and materials on jobsites. Performs daily equipment inspections, basic maintenance (fueling, greasing), and reports mechanical issues. Coordinates safely with ground crew and other operators, follows all site safety procedures, and keeps equipment clean and in good working order. Pay: $20.00 – $40.00 per hour, depending on experience Requirements • Required Qualifications, • MSHA certification (or ability to obtain prior to start), • Have the ability to navigate mountain terrain without GPS or survey guide, • Ability to work independently as well as part of a team, • Preferred Qualifications, • Previous experience in mining, exploration, reclamation, construction, or excavation, • Valid driver's license, • Physical Requirements, • Ability to lift up to 50 pounds occasionally, • Ability to stand, walk, bend, kneel, climb, and work on uneven terrain for extended periods, • Ability to work outdoors in varying weather conditions, • Frequent standing, walking, bending, and climbing throughout the workday, • Ability to work extended hours, overtime, and travel to remote job sites as required, • Must be able to wear appropriate PPE and conduct field inspections Benefits • Medical, dental, and vision Insurance (offered after the 1st of the month following 60 days), • 401 (k) Retirement Plan (offered after 90 days of employment), • Paid Time Off (offered after 90 days of full-time employment), • Per Diem for remote/travel assignments (dependent on each job location)

Job Description Job Title: CNC Set-Up Specialist Department: Operations Reports To: Production Manager FLSA Status: Non-Exempt Position Summary: Perform set-up and changeover on a variety of CNC machines to prepare jobs for production. The CNC Set-Up Specialist gathers the required tooling and parts called for on the production traveler, sets up and verifies the CNC program at the machine, and confirms the work order is ready to run before handing the machine off to the operator. This role reports to the Production Manager and supports safe, accurate, and efficient production across a range of equipment, including simple lathes, lathes with live tooling, lathes with turrets, vertical mills, horizontal mills, and multi-axis machines. Essential Duties and Responsibilities: • Review the production traveler for each CNC job and gather the required tooling, fixtures, and parts before beginning set-up., • Perform machine set-up and changeover on a range of CNC equipment, including simple lathes, lathes with live tooling, lathes with turrets, vertical mills, horizontal mills, and multi-axis machines., • Load and verify the correct CNC program, revision, and offsets at the machine, confirming they match the work order and production traveler., • Install and align tooling, fixtures, and work-holding per the setup documentation; verify fit and alignment before running the first piece., • Run first-article/first-piece parts as needed and confirm they meet print requirements before releasing the job to the operator., • Confirm the work order and machine are ready to run, and hand off a clear, complete setup to the machine operator., • Communicate tooling shortages, program discrepancies, or setup issues to the Production Manager or Manufacturing Engineering in a timely manner., • Support troubleshooting of setup-related issues that arise during a production run., • Maintain organized, labeled tooling and a clean work area consistent with 5S standards., • Basic CNC programming knowledge is helpful but not required, provided the individual is comfortable performing machine set-up independently. Competencies: To perform the job successfully, an individual should demonstrate the following: • Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods., • Safety - Follows all machine guarding, lockout/tagout, and PPE requirements. Identifies and reports unsafe conditions. Keeps the work area and tooling organized to prevent incidents., • Dependability - Commits to doing the best job possible. Follows instructions. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions., • Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner., • Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback., • Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity., • Lean Manufacturing – Exercises a commitment to driving value and eliminating waste. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: • Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • Language Ability: Read, analyze and interpret business, professional, technical or governmental documents. Write reports, business correspondence and procedure manuals. Effectively present information and respond to questions from managers, customers and the public., • Mathematical Ability: Must be able to conduct many types of mathematical problems including the ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry., • Reasoning Ability: Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Computer Skills: To perform this job successfully, individuals must have intermediate-level computer related skills including familiarization with word processing, spreadsheet, and MRP/ERP software., • Certificates and Licenses: None required. Supervisory Responsibilities: This position has no supervisory responsibility. The CNC Set-Up Specialist works under the direction of the Production Manager and coordinates directly with machine operators during job handoff. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Job DescriptionDescription: Location: Greater Bay Area, CA We are recruiting for candidates located in the following areas: Milpitas, Saratoga, Mountain View, San Francisco, Santa Clara, San Pablo, and San Jose, CA. Candidates residing in or near these areas are encouraged to apply. Job Summary The Service Technician is responsible providing exceptional service to our customers while performing on-site diagnostic, troubleshooting, preventive and corrective maintenance on a variety of gate and door systems as well as crash rated barriers and CCTV. Essential Duties and Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Provides a positive, collaborative, and informative customer service experience to both residential and commercial customers. Diagnoses the nature of the issue triggering the service call. Confirms authorization to perform the repair, scope, and warranty-related issues are resolved before beginning work., • Performs all necessary preventative and corrective maintenance. Welds, wires, and programs customer equipment as required by the nature of the service call. Ensures all workplace health and safety requirements are met. Maintains housekeeping and security of customer locations and job sites., • Ensures device operates as intended and as desired by the customer. Closes out the call in Service Titan. Documents the scope of work completed and identifies any other malfunctioning customer equipment or opportunities for additional work., • Manages truck inventory and partners with support team to order or purchase specialized equipment, missing parts, and other components and tools., • Perform other duties as assigned. Other Job Duties Please note this job description is not designed to over or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time without notice. Requirements: Required Education and Experience • Overhead door, CCTV, gate operator, electrical or welding experience a major plus., • Education and/or experience equivalent a High School diploma and 3 or more years working with gate operators, electronic controls, or other low-voltage electrical systems, or similar trade-related experience. Associates degree or vocational program with a focus on electro-mechanical systems preferred., • Familiarity with basic welding principles preferred., • At least 2 year of field service-related experience working on-site at customer locations and interacting with customers., • OSHA 10-Hour Certification preferred., • Must hold a valid driver's license and acceptable motor vehicle report Additional Qualifications • Communications: Able to communicate effectively in written and oral format with diverse individuals. Able to present information and respond to questions with peers, managers, clients, customers, and the general public on technical subjects. Able to read and comprehend written work instructions, technical documents, blueprints, manufacturer instruction manuals and other materials in English., • Math: Able to perform simple addition, subtraction, multiplication and division using standard units of measure and weight., • Reasoning: Able to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to develop logical troubleshooting techniques based on an understanding of the product performance and test requirements., • Time Management: Able to track and prioritize tasks in a fast-paced environment with several simultaneous projects/work orders. Able to work with minimal supervision., • Technology: Knowledge of email, texting, and work order systems sufficient for basic communication, reporting, and notes., • Physical Requirements: Able to push/pull/lift up to 50 lbs. frequently throughout the day. Able to stand, climb, walk, kneel, and crouch frequently, as required at a variety of customer locations/work sites., • Driving: Able to operate a motor vehicle for extended periods of time and possess a clean driving record. Work Environment The physical environment for this position includes construction sites, warehouses, and outdoor customer locations. Frequently required to use and promote use of personal protective equipment to prevent injury. Travel Required Frequent day travel to and from job sites, vendor locations, and offices.

Job DescriptionDescription: We are looking for a Heavy Duty Towing Operator to join our growing team! An ideal operator is someone who likes being active, is a creative problem solver, communicates well in a team environment, and has excellent customer service skills. This is not a desk job. Having an interest in automobile knowledge is a must, as no two situations are the same and you’ll need to make quick decisions under pressure. Tow Truck Operators keep our highways safe and are classified as First Responders. Come join the team and be an important part of your community! Essential Duties and Responsibilities include: • Respond to calls dispatched to you in a safe, timely manner. Provide roadside assistance in a safe, professional manner that is free of accidents, injuries and damage., • Communicate with dispatch in a professional, informative manner as it relates to information necessary to document your status in servicing a call as well as accurate ETA's when requested., • Professionally and safely perform emergency road service duties as may be dispatched to you, such as, but not necessarily limited to:, • Perform damage free towing, • Perform minor roadside repairs, excluding highways, • Perform roadside towing of heavy duty vehicles such as, • 18-wheelers, • Garbage Trucks, • Dump Trucks, • Cement Trucks, • Perform accident towing and scene clean-up, • Daily inspects the truck for safety, organization and related equipment, tools, rigging inventory, • Complete and turn in pre-shift inspection prior to beginning duty each day, • Immediately reports tools or equipment damaged or missing;, • Safe driving behavior is a must. Obey all traffic laws, drive defensively, always wear your seat belt, remember our 4-second following rule, minimize backing and left turns., • Trucks are kept clean inside and out; maintains the truck(s) fuel tanks half full at all times; Maintains truck fluid levels according to manufacturer standards and notes quantities added on the pre-shift inspection sheet., • Maintains the storage yard in a safe, clean and orderly manner. Ensures that all trash must be properly disposed of and not left in the truck or on the ground. Secures the storage yard when leaving., • All other duties as assigned by Supervisor Requirements: • Candidate must reside near their assigned area in order to meet customer service time requirements, • Ability to successfully pass DOT medical exam, • Current and valid driver’s license with a clean driving record, • All required state-based licensure, • Class A Commercial Driver’s License (CDL) no automatics only please, • This position requires the ability to bend, stoop, walk and stand for periods of time in all types of weather, • Willing to take a drug test and background check, • Confident and capable to drive in inclement weather, • Proficient in utilizing mobile and computer applications for completing administrative work, • Proficient in paper-based administrative work, • Experience, • 1 year experience operating a Heavy Duty Tow Truck OR 1 year experience hauling equipment via Semi-trailer Truck preferred, • Heavy Equipment or Machine Operation skills a plus Offers of employment are contingent upon the results of successfully passing a background screening including a criminal background check, a review of motor vehicle records, social security screening, and a drug and alcohol test as required by law.

Job Description CDL-A DRIVERS: FIND YOUR FOREVER TRUCKING JOB $60,000 - $120,000+ | COMPANY, LEASE, AND OWNER OPERATOR POSITIONS Are you looking for a driving job that fits your life-not the other way around? I recruit for 25 top trucking companies nationwide, offering custom-matched opportunities based on your experience, goals, and home time needs. Whether you're a new CDL-A holder or a seasoned owner-operator, I can help you find your best route. As a former truck driver, I understand the long hours, the importance of home time, and what drivers really want. I work for you, not just the company. WHAT'S AVAILABLE: ● Company Drivers | Lease Operators | Owner Operators ● Regional, OTR, and Dedicated Routes ● CDL-A Required (OK if you need training - we've got you covered) PAY & BENEFITS: ● $60K - $120K+ annually based on experience and type of trucking ● Full Benefits Package: Medical, Dental, Vision, Paid Time Off ● 401(k) with Company Match ● Weekly Pay & Direct Deposit ● Paid Orientation & Training Programs ● Late-Model Equipment & 24/7 Driver Support HOME TIME THAT WORKS FOR YOU Flexible scheduling based on your availability and area. Be home when it matters most. Whether you're chasing top pay, more miles, better home time, or ownership opportunities, this is your chance to level up your driving career-with someone who knows the road and has your back. LET ME HELP YOU FIND YOUR FOREVER JOB. Job Posted by ApplicantPro

Job Description Rear pilot car operator (also known as a chase car or rear escort) travels behind an oversized, heavy, or wide load to protect the transport team, warn trailing traffic, and monitor the cargo itself Key Responsibilities • Rear Traffic Management: Monitor vehicles approaching from behind, gauge the volume of traffic trailing the load, and block or shield lanes to help the oversized load merge or change lanes safely., • Load & Equipment Monitoring: Keep a close eye on the transport vehicle and trailer to spot load shifting, low or flat tires, loose tie-downs, or falling debris., • Radio Communication: Maintain constant two-way radio contact with the lead pilot car driver and the main transport truck driver, giving real-time updates on traffic and trailer positioning (such as turn clearances and lane space)., • Safety & Hazard Warning: Use required vehicle markings—including flashing amber warning lights, "Oversize Load" signs, and safety flags—to alert the public and prevent civilian drivers from cutting dangerously close to the trailer., • Post-Trip Tasks: Complete trip logs, report any roadside incidents or damage, and cover or deactivate warning signs when out of serviceTrailer steerman (or tillerman) is responsible for steering the rear axles of specialized, oversized, or articulated heavy-haul trailers to keep the load properly aligned and prevent off tracking. Core Responsibilities • Rear Axle Control: Operate and adjust the rear steering axles of large or articulated/perimeter trailers so the rear stays on course through tight turns, narrow roads, and complex industrial sites., • Communication: Maintain constant radio communication with the lead truck driver in the cab to coordinate turns, track positioning, and hazard avoidance., • Escort & Chase Duties: Often act as a chase pilot or operate a follow/steer escort vehicle equipped with warning signs and lights to alert traffic, manage flow, and provide a safety buffer behind the load., • Site Support & Rigging: Assist with loading and unloading operations, securing freight, checking axle weight distribution, and performing basic mechanical or roadside inspectionsTypical Qualifications & Requirements, • Mechanical Aptitude:(Not Required, we are willing to train) Experience with hydraulics, dual-lane trailers, multi-axle configurations, and weight distribution, • Skills: Strong spatial awareness, clear radio communication, and the ability to work flexible schedules or overtime on heavy-haul projectsPay- Depending on experience, hourly wage, overtime after 8 daily working hours. Daily per-diem. all Hotels paid for Powered by JazzHR fckiXCxKOr

Job Description POSITION PURPOSE Responsible for ensuring that the production process is run in a smooth and rapid manner, perform all plating, anodizing and chemical cleaning activity per work instruction and process job travelers. ESSENTIAL FUNCTIONS • Process parts in tanks according to specifications, work order and other requirements, • Calculates the appropriate amount of time needed to process parts, • Removes parts from tank after specified time, rinses parts and immerse them in bath before finishing processing, • Completes paperwork as required by company and processing guidelines, • Assist all line activities to Line Operator -2 to optimize throughput, • Record results on work order (dimensions, tank #, temperature, & volts, Time in /out of tank), • Evaluate and log all preventative maintenance on processing line, • Ensure all hazardous waste material is disposed of correctly, • Other duties as assigned, • Use required safety equipment (eye/ear protection, gloves, back brace when applicable), • Shall adhere to all Safety & Environmental requirements, • Take daily direction from Supervisor & Line Operator-2 & follow all management assignments & instructions QUALIFICATIONS Ability to read write and communicate effectively. Experience Required: Previous Experience with Chemical Processing preferred. Skills/Abilities: Maintain regular and consistent attendance and punctuality. Ability to deal with a variety of variables under only limited standardization and supervision. Ability to add, subtracts, multiply and divide in all units of measure using whole numbers and common factors. PHYSICAL ACTIVITIES AND REQUIREMENTS OF THIS POSITION Physical Strength: The employee must frequently lift and/or move up to 35 lbs by oneself and above 35 lbs must be able to use a lifting device NxEdge is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

Republic Services - - Responsibilities: Operate heavy equipment to move and compact waste; Inspect equipment before and after operation; Monitor waste for unacceptable materials; Perform minor equipment service and report repairs; Complete equipment condition and other reports.

Taylor Corporation - - Responsibilities: Perform end-to-end production of digital print projects; Operate digital printing equipment and bindery equipment; Perform routine maintenance on equipment; Verify materials, finishes, and specifications per work orders; Coordinate with production team to pr

As a Truck Driver and Equipment Operator within our 3PL utility logistics operation, you play a key role in keeping our customers’ supply chains moving. Conduct routine inspections and basic maintenance on trucks and equipment. Operate forklift, skid steer, excavator and other yard equipment.

Equipment Operator Key Responsibilities (Essential Duties and Functions):. Position Overview: This is a skilled position involving the safe and efficient operation of various types of construction equipment including but not limited to Loaders, Back Hoes, Track Hoes, Haul Trucks, Water Trucks, Etc.

As a Truck Driver and Equipment Operator within our 3PL utility logistics operation, you play a key role in keeping our customers’ supply chains moving. Truck Driver & Equipment Operator. Conduct routine inspections and basic maintenance on trucks and equipment.

The Winter Plow Crew Equipment Operator is responsible for safely clearing roads and parking lots to allow guests safe access to the mountain recreation area. Join the Team: Winter Plow Crew Equipment Operator. Operate plow trucks, wheel loaders, skid steers, and other snow removal equipment.

The Equipment Operator position is critical as we build better communities.

There are many jobs within the military that are transferable to our Crusher Operator Laborer position:Air Force:Pavement and Construction Equipment JourneymanPavement and Construction Equipment ApprenticePavement and Construction Equipment HelperArmy:Rough Terrain Forklift & Loader OperatorHeavy Co

Service and clean equipment as needed, as well as perform pre and post inspections to ensure proper performance of equipment. The Equipment Operator position for aggregate is critical as we build better communities. The ability to operate heavy equipment productively, efficiently, and safely.

Heavy Equipment OperatorWe're hiring experienced Heavy Equipment Operators for commercial and site work projects across the Treasure Valley. Do daily equipment inspections and basic maintenance. What you bring:- 3+ years of heavy equipment operating experience in construction.

The successful Excavation Equipment Operator will safely and efficiently operate heavy equipment to support underground plumbing installations while maintaining UMC's high standards for quality, productivity, and safety. Excavation Equipment Operator Qualifications:. Excavation Equipment Operator Pa

The Idaho Army National Guard is seeking a skilled equipment operator to support the OCTC and ITAM projects at OCTC and related sites within the Idaho Army National Guard.

Equipment Operators needed for projects throughout Southern Idaho. We are committed to helping veterans transition to civilian life and actively seek veterans for our Equipment Operator Grade Team. Experience operating excavators, loaders, and other heavy construction equipment.

Apply today to join the Ledcor team! Essential Responsibilities Operate a variety of heavy equipment including dozers, loaders, excavators, haul trucks, water trucks, and support/utility equipment Support loading, hauling, and dumping operations to keep production moving Safely build and maintai

The ideal candidate should have previous experience as an equipment operator and be willing to work various shifts. A leading construction materials company in Boise is hiring Paving Crew Equipment Operators. In this role, you will operate heavy equipment safely, conduct maintenance checks, and ensu

Amazon delivery partner opportunity – Earn $15.It's simple! Use your vehicle and smartphone to earn extra money delivering with a brand you trust.With Amazon Flex, you only deliver when you want to.Amazon Flex pays delivery partners for completing delivery blocks.When you schedule a block, you’l

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th