Trabajos inspector en Louisville, Kentucky - Page 2Crear alertas

The Aviation Safety Inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. Other inspectors seek their advice on problems relating to aircraft and their operation. Participates in the FAA flight program to maintain qualification and curre

The Inspector, QA performs quality raw material receiving, work in-process, and end item inspection at defined points of inspection.

A leading engineering firm is seeking a Senior Roadway and Bridge Construction Inspector in Louisville, KY.

In addition to meeting the minimum requirements, applicants must have one year (52 weeks) of specialized experience equivalent to the next lower grade level in the normal line of progression (FG-14/GS-14 or Pay Band J), as an Aviation Safety Inspector Air Carrier Maintenance 1825. Applicants for Avi

Serves as the technical advisor to the principal inspector on assigned areas of the company training and testing programs. Coordinates technical instructions, policy orders, and procedures through the principal inspector to assure uniformity of training and testing activities. Coordinates with geogr

Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Louisville, KY Job Type: Full-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned as required: Follow area-specific startup, production, or gaging (as applicable) utilizing standardized work instructions Adhere to condition standards, record readings where applicable, recognizing and reporting abnormalities Attach appropriate labels and tags to products and packages; scan product labels as required Understand and correctly use Kanban systems in assigned work areas Complete 100% production for scheduled Kanban parts/numbers during each assigned shift Report quickly and often any safety, quality and production issues which indicate work hazards, potential missed delivery or overtime possible to supervisor. Pack in-process or finished goods into correct packaging/returnable using proper inserts and techniques to avoid damage to products during transit on site or after shipment to customer Place in-process or finished good returnables or boxes into proper storage area, racks, roller system or other staging area for pulling to next process or shipment to customer Accurately track production and defects daily using assigned forms/scanning/entry daily Perform visual checks on products based on common quality problems per work instruction Use marking method per work instruction after inspection of part prior to packaging Perform First Middle Last (FML) checks during shift, subject to supervisor approval Visually troubleshoot problems with equipment, tools or process Communicate any quality problems using STOP-CALL-WAIT (contacting supervisor) Contact supervisor or production team leader immediately to report mechanical or tool issues Prepare in-process or raw materials to flow into the work cell in the correct sequence as applicable Keep raw materials bins full in order to maintain uninterrupted work flow Contact supervisor of any material issues (shortages, defects, etc) Understand Toyota Production System (TPS) basics in order to produce the parts in the most efficient and effective manner (Safety, Quality, Cost, Productivity, Delivery, Environmental, HRD) Implement basic Kaizen (continuous improvement) in daily process and work environment Apply 5S and 2S + 1Y cleaning & organizing techniques to work cell/department/break areas Work safely, following company-wide and department-specific safety rules, including job rotations Identify and wear proper Personal Protective Equipment (PPE) as prescribed by job/task Collect hazardous/non-hazardous/recyclable material or other wastes in correctly labeled containers, transferring them to collection areas Actively participate in monthly or quarterly inventory counts within department, section or division Must be available to work in all areas of production within the division (cross trained) Must follow company-wide procedures/policies/rules Adhere to visual stack height Kanban control Ability to withstand monotonous production without interfering with other peoples work i.e. talking, etc. Broad production jobs PTM’s could perform include, but are not limited to: *Injection Assembly; *Relief Technician; *Dandori; *Injection Molder; *Chrome Assembly/Prep/Inspector/Loader/Unloader;*Vibration Welder; SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis. Candidates must be able to pass job-related assessments as applicable which may include, but are not limited to: a pegboard dexterity (performance) test, vision/color test, a timed pencil & paper electronic assembly test, and an on-line reliability/achievement (behavioral) test, a fit-for-duty test to ensure ability to perform the essential functions of the job, a drug screen. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) will be considered primarily/preferred; in absence of GED or HS Diploma, must have 3 years or more experience in manufacturing and be willing to complete a GED within 12 months of hire. LANGUAGE SKILLS: Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between a series of numbers. Must be able to communicate both in simple written and verbal form. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed written/visual or oral instructions. Ability to deal with problems (problem-solve) involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Hazardous material handling certifications required for assigned duties within paint, chrome or other departments as required PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job on a regular basis. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job on a case-by-case basis. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, feel or pinch; reach with hands and arms; see, speak and hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. In accordance with our job specific tier testing, the employee must lift and carry between 20 to 100 pounds at various intervals and heights (floor to overhead), exert a pull force of 40 pounds or higher, exert a push force of 40 pounds or higher, and exert a pinch force of 10 pounds or higher. Specific vision abilities required by this job include close vision, peripheral vision, ability to adjust focus and differentiation of color. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and extreme heat. The employee is occasionally exposed to chemicals or fumes within prescribed limits

Job DescriptionDescription: Description Job Title: Vial Production Assistant Reports to: Vial Production Team Lead and/or Director of Immunology Employment Classification: Non-exempt, Hourly Schedule: Mon-Fri 8-5pm Occassional Sat OT Position Summary The Vial Production Assistant (VPA) is responsible for demonstrating knowledge and application of job duties and functions under the direction of their manager(s) and/or Director(s); respectfully interacts with all levels of staff; participates in department activities; promotes independence; adherence to the attendance policy; encourages socialization; supports the company’s core values. Summary of Duties and Responsibilities • Prepare allergy vials with extracts using proper guidelines, • Be familiar with extracts used in VPA and those for testing, • Make vials for reorders (in-house and mail outs), • Make vials for New Start patients, • Check phone messages, web orders, and fridge temps, • Assist in shipping vials by UPS or courier, • Assist with supplies as needed, • Check benefits and balances of patient accounts for reorders and new starts, • Answer phone calls from patients, PCP offices, and coworkers regarding reactions, dilutions, building schedules, extracts, issues, and concerns, • Maintain and follow HIPAA policies and procedures Effective communication skills to include: • Ability to fluently speak and read English, • Ability to read and interpret documents such as safety rules, handbooks, policies, and procedure manuals, • High school diploma/ GED, • MA preferred, • Previous medical office experience preferred, • Basic computer skills, • Acceptable results on Office of Inspector General, State Medicaid Exclusions, Abuse Registry Checks, Background Screenings, Drug Screen, and Sanction Checks Physical Demands The physical demands described, here, are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the physical demands. • While performing the duties of this job, the employee is regularly required to use hands to handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear., • The employee frequently is required to stand, walk, stoop, kneel, crouch, reach, push, pull, bend and sit. On average, Vial Production Assistants may be sitting 80% of their shift., • The employee must occasionally lift and/or move up to 30 pounds., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. • The noise level in the work environment is usually moderate; lighting is in the standard range. Family Allergy & Asthma provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Requirements:

Assistant Partial Program Manager (Avionics) Part 121.The Assistant Partial Program Manager (Avionics) Part 121 serves as a full assistant to a Partial Program Manager (Avionics) Part 121 who is assigned a portion of the airworthiness program performing inspections, surveillance, and certification d

Coordinates with Principal Operations Inspectors throughout the FAA who are assigned air carrier operators using the training center to ensure proper application of training programs for the particular air carrier involved. Coordinates and conducts various surveillance and certification activities,

The Aviation Safety Inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. Other inspectors seek their advice on problems relating to aircraft and their operation. Participates in the FAA flight program to maintain qualification and curre

The inspector is required to maintain an FAA second class medical. Serves as the technical advisor to the principal inspector on assigned areas of the company training and testing programs. Coordinates technical instructions, policy orders, and procedures through the principal inspector to assure un

Coordinates minimum equipment list (MEL) approvals with the principal operations inspector. Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.

Coordinates minimum equipment list (MEL) approvals with the principal operations inspector. Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.

NOFS (Northern Ohio Field Services) is currently seeking an experienced Mortgage Inspector to join our growing team in Jefferson County Kentucky. As a Mortgage Inspector at NOFS, you will be responsible for conducting inspections on residential properties to ensure occupancy status.

Job Description FAR Inspections is a leading provider of property data for mortgage lenders nationwide. Based in Reno, NV, we have a 12-year track record of excellence and stability in the mortgage field services industry. We partner with highly motivated independent contractors who prioritize accuracy, reliability, and professional autonomy. The Opportunity Earn a predictable supplemental or full-time income on a flexible schedule that you control. As a Field Inspector, you will perform residential occupancy verifications. These are brief, exterior visits to confirm property status and report on general conditions. • Autonomy: You manage your own routing, schedule, and territory., • Efficiency: Standard inspections are designed for speed, typically requiring only 5–6 minutes on-site., • Consistency: Enjoy stable, month-to-month volume in your assigned county.Workflow & Responsibilities, • Determine property occupancy status based on industry-standard indicators., • Capture 9+ photos and submit brief reports using industry-standard mobile applications., • Reliable, fuel-efficient vehicle., • Smartphone (Android or iPhone)., • Computer with an internet connection and a printer., • Ability to pass a background check., • Strong time-management skills.Earnings & Volume, • Flat-Rate Pay: This is a 1099 position where you are paid a set fee for every inspection completed., • Earning Potential: $25-$35 per hour.

Job DescriptionSalary: Purpose The Heavy Highway Project Manager manages heavy highway or civil construction projects from their inception to the completion of the life cycle. The position is responsible for managing daily activities and issues related to completing a construction project,including overall project planning, scheduling, project cost accounting, quality control, contract administration, safetymanagement, labor and equipment resources, and owner relationships. Job Responsibilities • Oversees construction projects from start to finish by developing a master project schedule that is updated and communicated to all subcontractors, suppliers,owners, and field personnel to assure timely project(s) completion. Establishes project(s) subcontract requirements and reviews these requirements with divisional management. * Responsible for controlling costs and maintaining profitability for the project(s), utilizing extensive heavy construction experience. * Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs. * Oversee change order justifications and inspector performance. * Coordinates with engineers, inspectors, and clients/owner representatives to isolate project issues and assists construction management in developing solutions. * Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provides support in ensuring projects remain on schedule. * Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work. * Continuously supports safety and provides assistance to supervision in addressing areas and conditions requiring attention. * Coordinates with Superintendents on work with subcontractors to ensure all subcontract work is within project(s) scope and specifications. * Administers project(s) policies and procedures to subcontractors. Education and Experience * S. Civil Engineering or Construction Management preferred. • 3+ years of experience working for a Highway Contractor as a Project Manager on DOT or heavy highway projects required. Project size ranges from $400k to $50 million dollars., • Previous experience working as a Foreman or Superintendent on heavy highway projects., • Estimating experience, a strong plus., • Proficient in using Primavera P6 is preferred., • Proven ability to create and manage budget., • Strong leadership, teamwork, problem solving, and analytical skills., • Strong prioritization and organizational skills; detail-oriented., • Proficient in technology (computer/specialized software/GPS equipment) Benefits • Health Insurance (PPO and HSA Plans) Dental and Vision Insurance * Short and Long Term Disability * Life Insurance, Supplemental and Dependent Plans * 401k with Company Match * Accrued Paid Time Off * Direct Deposit Paychecks * Safety Training * Employee Referral Program An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job DescriptionDescription: Description Job Title: PT Injection Room Nurse LPN/RN Reports to: Injection Room Manager Work Schedule: Part Time Monday, Weds, Thursday Employment Classification: Non-exempt, Hourly Travel: Yes, (CC/LG Pod) often to metro Louisville/Southern Indiana-Metro territory is as far North as COL IN to as far S as RAD/LEITCH KY. Training can occur at any office and there may be times you are scheduled at another office within our territory. Position Summary The Injection Room Nurse is responsible for demonstrating knowledge and application of job duties within scope of practice and functions under the direction of their manager(s) and/or Director(s); respectfully interacts with all levels of staff; provides direct nursing care during assigned duty hours; participates in department activities; promotes independence; adherence to the attendance policy; encourages socialization; advocates for the quality of life of our patients while maintaining compliance with all applicable laws, regulatory and organizational standards; supports the company’s core values. Summary of Duties and Responsibilities • Prepare the injection room area each morning, • Administer allergy injections, • Re-stock area, as needed, and order supplies through the approved clinical procedure, • Complete daily log of charges and total at end of day, • Collect co-pays and write out patient receipt, • Re-order vials in a timely manner, • Organize refrigerated vials in appropriate bins, • Log daily refrigerator temperatures, • Monitor shot cards monthly and discard expired vials, • Ensure that consent forms are signed; explain shot room policies to new patients, • Education of patients in first injection policy, • Maintain and follow HIPAA policies and procedures, • Stay the required 30 minutes after last injection is given before lunch or the end of the day, • Clean toy and lobby area, • Knowledge of all medications and IT treatment, • Check emergency medications monthly and reorder, as needed, • Effectively manage emergency procedures and protocols Effective communication skills to include: • Ability to fluently speak and read English, • Ability to read and interpret documents such as safety rules, handbooks, policies, patient care plans and procedure manuals, • Diploma in Nursing- LPN/RN with an active and unrestricted KY and IN Nursing Licenses, or an eNLC multistate nursing license, • 6 months’ experience in a medical office setting preferred, • Previous allergy/asthma experience preferred, • CPR certification required, • Valid Driver’s License required, • Active CPR Certification, • Acceptable results on Office of Inspector General, State Medicaid Exclusions, Abuse Registry Checks, Background Screenings, Drug Screen, and Sanction Checks, • Ability to travel to satellite offices as needed, • Must be at least 18 years of age, • Ability to work with patients directly and pleasantly, • Ability to work independently, • Strong computer skills Physical Demands The physical demands described, here, are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the physical demands. • While performing the duties of this job, the employee is regularly required to use hands to handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear., • The employee frequently is required to stand, walk, stoop, kneel, crouch, reach, push, pull, bend and sit. On average, injection room or clinic staff may be standing or walking 80% of their shift., • The employee must occasionally lift and/or move up to 30 pounds., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. • The noise level in the work environment is usually moderate; lighting is in the standard range. Family Allergy & Asthma provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Requirements:

Job DescriptionSalary: Purpose The PACE Contracting Project Manager (Indianapolis Area) manages waste water, water treatment, and streetscape construction projects from inception to completion as a general contractor, while demonstrating excellent leadership, planning and scheduling, project execution, financial management, and technical expertise. Pace Project Managers are a key leadership position within the organization, and shall have the ability to communicate with upper management, as well as field staff. The Project Manager will have the capacity to build the job mentally, and communicate it both verbally and in writing. Collaboration & cooperation amongst the team is imperative; we function as a team or we fail. Job Responsibilities Leadership • Provides and drives the project vision established in collaboration with the client to upper management, project team, subcontractors, and all other stakeholders., • Motivates project team members to realize the project vision., • Effectively communicates project constraints and goals., • Maintains a high level of professionalism. Planning and Scheduling • Identify scope of work and perform quantity takeoffs from engineering plans., • Establishes project(s) subcontract requirements and supplier scopes to be reviewed with divisional management., • Reviews submittals and ensures they are in compliance with drawings and specifications., • Generators and submits RFIs to owner/engineer., • Performs cost analysis on various construction methods., • Collaborates with project field personnel to develop three-week look ahead schedules detailing self-perform tasks along with subcontractor tasks. Project Execution • Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs., • Oversee change order justifications and inspector performance., • Coordinates with engineers, inspectors, and clients/owner representatives to isolate project issues and assists construction management in developing solutions., • Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provides support in ensuring projects remain on schedule., • Coordinates with Superintendents on work with subcontractors to ensure all subcontract work is within project(s) scope and specifications., • Administers project(s) policies and procedures to subcontractors. Financial Management • Responsible for controlling and tracking costs and maintaining profitability for the project(s)., • Generating monthly cost to complete reports for division heads and company owners., • Ensure positive project cash flow for all projects., • Provide monthly project sales projections for the duration of the project. Technical Expertise • Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work., • Understands various civil, architectural, mechanical, and electrical construction methods., • Continuously supports safety and aids supervision in addressing areas and conditions requiring attention. Education and Experience • B.S. Civil Engineering, Construction Management, or related discipline., • 3+ years of experience working for a similarly positioned contractor as a Project Manager. Project size ranges from $1 million to $10 million., • Previous experience working as a Foreman or Superintendent on similar projects a plus., • Estimating experience, a strong plus., • Proven ability to create and manage budget., • Strong prioritization and organizational skills; detail oriented., • Proficient in technology (MS Office Suite, Primavera, AutoCAD, Vista) An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job Description SUMMARY Production Team Members (PTM’s) within Interior/Exterior Division adhere to approved standardized work, quality, or other instructions in each respective process, utilizing in-process or finished goods Kanbans to build the right amount of parts in recurring cycles throughout each shift, molding/assembling/painting/chrome one or more raw materials and/or in-process materials into finished goods, utilizing the proper machine, materials, method and manpower (4M) in order to safely produce quality products and meet customer orders daily. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned as required: Follow area-specific startup, production, or gaging (as applicable) utilizing standardized work instructions Adhere to condition standards, record readings where applicable, recognizing and reporting abnormalities Attach appropriate labels and tags to products and packages; scan product labels as required Understand and correctly use Kanban systems in assigned work areas Complete 100% production for scheduled Kanban parts/numbers during each assigned shift Report quickly and often any safety, quality and production issues which indicate work hazards, potential missed delivery or overtime possible to supervisor. Pack in-process or finished goods into correct packaging/returnable using proper inserts and techniques to avoid damage to products during transit on site or after shipment to customer Place in-process or finished good returnables or boxes into proper storage area, racks, roller system or other staging area for pulling to next process or shipment to customer Accurately track production and defects daily using assigned forms/scanning/entry daily Perform visual checks on products based on common quality problems per work instruction Use marking method per work instruction after inspection of part prior to packaging Perform First Middle Last (FML) checks during shift, subject to supervisor approval Visually troubleshoot problems with equipment, tools or process Communicate any quality problems using STOP-CALL-WAIT (contacting supervisor) Contact supervisor or production team leader immediately to report mechanical or tool issues Prepare in-process or raw materials to flow into the work cell in the correct sequence as applicable Keep raw materials bins full in order to maintain uninterrupted work flow Contact supervisor of any material issues (shortages, defects, etc) Understand Toyota Production System (TPS) basics in order to produce the parts in the most efficient and effective manner (Safety, Quality, Cost, Productivity, Delivery, Environmental, HRD) Implement basic Kaizen (continuous improvement) in daily process and work environment Apply 5S and 2S + 1Y cleaning & organizing techniques to work cell/department/break areas Work safely, following company-wide and department-specific safety rules, including job rotations Identify and wear proper Personal Protective Equipment (PPE) as prescribed by job/task Collect hazardous/non-hazardous/recyclable material or other wastes in correctly labeled containers, transferring them to collection areas Actively participate in monthly or quarterly inventory counts within department, section or division Must be available to work in all areas of production within the division (cross trained) Must follow company-wide procedures/policies/rules Adhere to visual stack height Kanban control Ability to withstand monotonous production without interfering with other peoples work i.e. talking, etc. Broad production jobs PTM’s could perform include, but are not limited to: *Injection Assembly; *Paint Operator/Assembly/Prep/Inspector/Loader; *Relief Technician; *Dandori; *Injection Molder; *Chrome Assembly/Prep/Inspector/Loader/Unloader; *Service Parts; *Diecast Injection Molder; *Airbag Assembly; *Diecast Finishing/Clinching; *Vibration Welder; *Poly Molder; *Die Cast Molder; *Regrind; *Welder; *Flocking; *Stamping; SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis. Candidates must be able to pass job-related assessments as applicable which may include, but are not limited to: a pegboard dexterity (performance) test, vision/color test, a timed pencil & paper electronic assembly test, and an on-line reliability/achievement (behavioral) test, a fit-for-duty test to ensure ability to perform the essential functions of the job, a drug screen. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) will be considered primarily/preferred; in absence of GED or HS Diploma, must have 3 years or more experience in manufacturing and be willing to complete a GED within 12 months of hire. LANGUAGE SKILLS: Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between a series of numbers. Must be able to communicate both in simple written and verbal form. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed written/visual or oral instructions. Ability to deal with problems (problem-solve) involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Hazardous material handling certifications required for assigned duties within paint, chrome or other departments as required PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job on a regular basis. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job on a case-by-case basis. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, feel or pinch; reach with hands and arms; see, speak and hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. In accordance with our job specific tier testing, the employee must lift and carry between 20 to 100 pounds at various intervals and heights (floor to overhead), exert a pull force of 40 pounds or higher, exert a push force of 40 pounds or higher, and exert a pinch force of 10 pounds or higher. Specific vision abilities required by this job include close vision, peripheral vision, ability to adjust focus and differentiation of color. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and extreme heat. The employee is occasionally exposed to chemicals or fumes within prescribed limits

Job DescriptionSalary: Purpose The PACE Contracting Senior Project Manager manages waste water, water treatment, and streetscape construction projects from inception to completion as a general contractor, while demonstrating excellent leadership, planning and scheduling, project execution, financial management, and technical expertise. Pace Project Managers are a key leadership position within the organization, and shall have the ability to communicate with upper management, as well as field staff. The Project Manager will have the capacity to build the job mentally, and communicate it both verbally and in writing. Collaboration & cooperation amongst the team is imperative; we function as a team or we fail. Job Responsibilities Leadership • Provides and drives the project vision established in collaboration with the client to upper management, project team, subcontractors, and all other stakeholders., • Motivates project team members to realize the project vision., • Effectively communicates project constraints and goals., • Maintains a high level of professionalism., • Oversees and leads multiple Project Managers. Planning & Scheduling • Identify scope of work and perform quantity takeoffs from engineering plans., • Establishes project(s) subcontract requirements and supplier scopes to be reviewed with divisional management., • Reviews submittals and ensures they are in compliance with drawings and specifications, • Generators and submits RFIs to owner/engineer., • Performs cost analysis on various construction methods., • Collaborates with project field personnel to develop three-week look ahead schedules detailing self-perform tasks along with subcontractor tasks. Project Execution • Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs., • Oversee change order justifications and inspector performance., • Coordinates with engineers, inspectors, and clients/owner representatives to isolate project issues and assists construction management in developing solutions., • Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provides support in ensuring projects remain on schedule., • Coordinates with Superintendents on work with subcontractors to ensure all subcontract work is within project(s) scope and specifications., • Administers project(s) policies and procedures to subcontractors. Financial Management • Responsible for controlling and tracking costs and maintaining profitability for the project(s)., • Generating monthly cost to complete reports for division heads and company owners., • Ensure positive project cash flow for all projects., • Provide monthly project sales projections for the duration of the project. Technical Expertise • Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work., • Understands various civil, architectural, mechanical, and electrical construction methods., • Continuously supports safety and aids supervision in addressing areas and conditions requiring attention. Education and Experience • B.S. Civil Engineering, Construction Management, or related discipline., • 8+ years of experience working for a similarly positioned contractor as a Project Manager. Project size ranges from $5 million to $20 million., • Previous experience working as a Foreman or Superintendent on similar projects a plus., • Estimating experience, a strong plus., • Proven ability to create and manage budget., • Strong prioritization and organizational skills; detail oriented., • Proficient in technology (MS Office Suite, Primavera, AutoCAD, Vista). An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job DescriptionSalary: Purpose The PACE Contracting Project Manager manages waste water, water treatment, and streetscape construction projects from inception to completion as a general contractor, while demonstrating excellent leadership, planning and scheduling, project execution, financial management, and technical expertise. Pace Project Managers are a key leadership position within the organization, and shall have the ability to communicate with upper management, as well as field staff. The Project Manager will have the capacity to build the job mentally, and communicate it both verbally and in writing. Collaboration & cooperation amongst the team is imperative; we function as a team or we fail. Job Responsibilities Leadership • Provides and drives the project vision established in collaboration with the client to upper management, project team, subcontractors, and all other stakeholders., • Motivates project team members to realize the project vision., • Effectively communicates project constraints and goals., • Maintains a high level of professionalism. Planning and Scheduling • Identify scope of work and perform quantity takeoffs from engineering plans., • Establishes project(s) subcontract requirements and supplier scopes to be reviewed with divisional management., • Reviews submittals and ensures they are in compliance with drawings and specifications., • Generators and submits RFIs to owner/engineer., • Performs cost analysis on various construction methods., • Collaborates with project field personnel to develop three-week look ahead schedules detailing self-perform tasks along with subcontractor tasks. Project Execution • Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs., • Oversee change order justifications and inspector performance., • Coordinates with engineers, inspectors, and clients/owner representatives to isolate project issues and assists construction management in developing solutions., • Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provides support in ensuring projects remain on schedule., • Coordinates with Superintendents on work with subcontractors to ensure all subcontract work is within project(s) scope and specifications., • Administers project(s) policies and procedures to subcontractors. Financial Management • Responsible for controlling and tracking costs and maintaining profitability for the project(s)., • Generating monthly cost to complete reports for division heads and company owners., • Ensure positive project cash flow for all projects., • Provide monthly project sales projections for the duration of the project. Technical Expertise • Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work., • Understands various civil, architectural, mechanical, and electrical construction methods., • Continuously supports safety and aids supervision in addressing areas and conditions requiring attention. Education and Experience • B.S. Civil Engineering, Construction Management, or related discipline., • 3+ years of experience working for a similarly positioned contractor as a Project Manager. Project size ranges from $1 million to $10 million., • Previous experience working as a Foreman or Superintendent on similar projects a plus., • Estimating experience, a strong plus., • Proven ability to create and manage budget., • Strong prioritization and organizational skills; detail oriented., • Proficient in technology (MS Office Suite, Primavera, AutoCAD, Vista) An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job DescriptionSalary: Purpose The PACE Contracting Senior Project Manager (Indianapolis Area) manages waste water, water treatment, and streetscape construction projects from inception to completion as a general contractor, while demonstrating excellent leadership, planning and scheduling, project execution, financial management, and technical expertise. Pace Project Managers are a key leadership position within the organization, and shall have the ability to communicate with upper management, as well as field staff. The Project Manager will have the capacity to build the job mentally, and communicate it both verbally and in writing. Collaboration & cooperation amongst the team is imperative; we function as a team or we fail. Job Responsibilities Leadership • Provides and drives the project vision established in collaboration with the client to upper management, project team, subcontractors, and all other stakeholders., • Motivates project team members to realize the project vision., • Effectively communicates project constraints and goals., • Maintains a high level of professionalism., • Oversees and leads multiple Project Managers. Planning & Scheduling • Identify scope of work and perform quantity takeoffs from engineering plans., • Establishes project(s) subcontract requirements and supplier scopes to be reviewed with divisional management., • Reviews submittals and ensures they are in compliance with drawings and specifications, • Generators and submits RFIs to owner/engineer., • Performs cost analysis on various construction methods., • Collaborates with project field personnel to develop three-week look ahead schedules detailing self-perform tasks along with subcontractor tasks. Project Execution • Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs., • Oversee change order justifications and inspector performance., • Coordinates with engineers, inspectors, and clients/owner representatives to isolate project issues and assists construction management in developing solutions., • Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provides support in ensuring projects remain on schedule., • Coordinates with Superintendents on work with subcontractors to ensure all subcontract work is within project(s) scope and specifications., • Administers project(s) policies and procedures to subcontractors. Financial Management • Responsible for controlling and tracking costs and maintaining profitability for the project(s)., • Generating monthly cost to complete reports for division heads and company owners., • Ensure positive project cash flow for all projects., • Provide monthly project sales projections for the duration of the project. Technical Expertise • Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work., • Understands various civil, architectural, mechanical, and electrical construction methods., • Continuously supports safety and aids supervision in addressing areas and conditions requiring attention. Education and Experience • B.S. Civil Engineering, Construction Management, or related discipline., • 8+ years of experience working for a similarly positioned contractor as a Project Manager. Project size ranges from $5 million to $20 million., • Previous experience working as a Foreman or Superintendent on similar projects a plus., • Estimating experience, a strong plus., • Proven ability to create and manage budget., • Strong prioritization and organizational skills; detail oriented., • Proficient in technology (MS Office Suite, Primavera, AutoCAD, Vista). An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job DescriptionSalary: TheCommercial Building Project Manager manages Commercial Building Construction projectsfrom inception to completion as a general contractor, while demonstrating excellent leadership, planning and scheduling, project execution, financial management, and technical expertise. Pace Project Managers are a key leadership position within the organization and shall have the ability to communicate with upper management, as well as field staff. The Project Manager will have the capacity to build the job mentally and communicate it both verbally and in writing. Collaboration & cooperation amongst the team is imperative; we function as a team or we fail. Duties and Responsibilities: • Provides and drives the project vision established in collaboration with the client to upper management, project team, subcontractors, and all other stakeholders., • Motivates project team members to realize the project vision., • Effectively communicates project constraints and goals., • Maintains a high level of professionalism., • Oversees construction projects from start to finish by developing a master project schedule that is updated and communicated to all subcontractors, suppliers, owners, and field personnel throughout the duration of the project to ensure timely project completion., • Identify scope of work and perform quality takeoffs from engineering plans., • Establishes project(s) subcontract requirements and supplier scopes to be reviewed with divisional management., • Reviews submittals and ensure they are in compliance with drawings and specifications., • Performs cost analysis on various construction methods., • Collaborates with project field personnel to develop three-week look ahead schedules detailing self-perform tasks along with subcontractor tasks., • Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs., • Oversee change order justifications and inspector performance., • Coordinates with engineers, inspectors, and clients/owners representatives to isolate project issues and assists construction management in developing solutions., • Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provide support in ensuring projects remain on schedule., • Coordinate with Superintendents on work with subcontractors to ensure all subcontract work is withing project(s) scope of specifications., • Administers project(s) policies and procedures to subcontractors., • Responsible for controlling and tracking costs maintaining profitability for the project(s)., • Generating monthly cost to complete reports for division heads and company owners., • Ensure positive project cash flow for all project(s)., • Provide monthly project sales projections for the duration of the project(s)., • Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work., • Understands various civil, architectural, mechanical, and electrical construction methods., • Continuously supports safety and aids supervision in addressing areas and conditions requiring attention. Education and Experience: • Construction Management or relate discipline., • 5+ years of experience working for a similar positioned contractor as a Project Manager. Project size ranges from $1 million to $10 million., • Previous experience working a Foreman and Superintendent on a similar projects a plus., • Estimating experience, a strong plus., • Proven ability to create and manage a budget., • Strong prioritization and organizational skills, and detail oriented., • Proficient in MS Office Suite, Primavera, Vista, and Procore An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job Description Attention Quality Inspector! Now Hiring … Looking forward to your next big opportunity? Whelan Machine is growing, and we want YOU to join our team! We’re proud to be part of the Department of Defense (DoD) and offer you a chance to work in an exciting, fast-paced industry. Supporting the mission with world-class precision is at the heart of what we do. Whelan Machine is a mission-critical supplier of high-precision machining for the U.S defense industrial base. We offer quarterly incentive pay and the opportunity to work in our new and improved 70,000-square foot facility! • Competitive pay, • Great benefits, • Quarterly incentive pays, • A workplace that values YOUR skill and growth, • Be part of the DoD and helping make a difference, • Supporting the mission with world-class precision If you're in Louisville or nearby, don't miss this opportunity! Apply today and become part of the Whelan family. Scope: Quality Inspector ensures that products and materials meet established quality standards through inspection, testing, and documentation. A Quality Inspector, also known as a QA Inspector, is responsible for reviewing products and materials during manufacturing to ensure they meet standards. Duties and Responsibilities: • Inspect Products and Materials: Conduct visual inspections and use measurement tools to verify dimensions, tolerances, and specifications, including CMM and Faro dimensional inspections, height, length, ID/OD, true position, runout, concentricity, flatness, thread standards, and roundness., • Testing and Quality Checks: Perform quality inspections to identify defects, deviations, or non-conforming products and actively participate in identifying and troubleshooting the recommended adjustments to production machining processes., • Documentation: Verify part traceability, paperwork accuracy, and configuration to the correct drawing revision. Record inspection results, maintain logs, and input data into quality databases to track product quality and rework. Perform First Article Inspections 100% dimensional and visual inspection of machined components in accordance with drawings, technical instructions, and AS9100 requirements., • Collaboration: Work with manufacturing teams to prevent defects, improve processes, and ensure compliance with quality standards., • Gauge Calibration: Ensure measurement gauges are calibrated, maintained, and function properly. Coordinates external calibrations, source inspections, and quality audits with customers, suppliers, and governmental agencies. FLSA Status: Non- Exempt Version Date: 04/16/2026 Requirement: Must be a US Citizen Preferred Skills and Qualifications: • Attention to Detail: Ability to detect minor defects and inconsistencies that could affect product quality., • Technical Knowledge: Understanding of quality control methods, blueprints, Microsoft Office 365, netInspec, Discuss, Zeiss Calypso, Faro Cam 2, and product specifications., • Problem-Solving: Identify and resolve quality issues efficiently, often collaborating with teams to determine the cause and develop effective corrective actions. Education: High school diploma or equivalent required; A.S. Degree, technical certification in geometric dimensioning and tolerancing (GD&T), ASQ Certified Quality Inspector (CQI), metrology or a related field is preferred. Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee sits, stands, uses hands, arms and fingers to perform routine tasks. Normal vision and hearing and the ability to communicate effectively to others in person or via written communication (in English) is needed. Basic math skills are required. This position will usually be worked in the warehouse which may occasionally have various odors and noise emanating from the warehouse. This is not an exhaustive list of responsibilities, skills, duties, requirements, or working conditions associated with this job. While this list is intended to be an accurate reflection of the position, the company reserves the right to revise the functions and duties of the job or to increase or decrease the scope of responsibilities when circumstances dictate, as determined by the owners.

Job DescriptionSalary: The Project Manager - Lexingtonmanages heavy highway or civil construction projects from their inception to the completion of the life cycle. The position is responsible for managing daily activities and issues related to completing a construction project,including overall project planning, scheduling, project cost accounting, quality control, contract administration, safetymanagement, labor and equipment resources, and owner relationships. Job Responsibilities • Oversees construction projects from start to finish by developing a master project schedule that is updated and communicated to all subcontractors, suppliers,owners, and field personnel to assure timely project(s) completion., • Establishes project(s) subcontract requirements and reviews these requirements with divisional management., • Responsible for controlling costs and maintaining profitability for the project(s), utilizing extensive heavy construction experience., • Continually monitors project(s) to assure company and regulatory procedures are adhered to. Monitors project(s) purchasing activities to assure quality material and timely delivery at competitive costs., • Oversee change order justifications and inspector performance., • Coordinates with engineers, inspectors, and clients/owner representatives to isolate project issues and assists construction management in developing solutions., • Reviews field construction activity, engineering, and other field project(s) support activities with construction management and provides support in ensuring projects remain on schedule., • Conducts regular project(s) inspections and advises project(s) supervision of work progress and quality of work., • Continuously supports safety and provides assistance to supervision in addressing areas and conditions requiring attention., • Coordinates with Superintendents on work with subcontractors to ensure all subcontract work is within project(s) scope and specifications., • Administers project(s) policies and procedures to subcontractors. Educationand Experience • S. Civil Engineering or Construction Management preferred., • 3+ years of experience working for a Highway Contractor as a Project Manager on DOT or heavy highway projects required. Project size ranges from $400k to $50 million dollars., • Previous experience working as a Foreman or Superintendent on heavy highway projects., • Estimating experience, a strong plus., • Proficient in using Primavera P6 is preferred., • Proven ability to create and manage budget., • Strong leadership, teamwork, problem solving, and analytical skills., • Strong prioritization and organizational skills; detail-oriented., • Proficient in technology (computer/specialized software/GPS equipment) Benefits • Health Insurance (PPO and HSA Plans), • Dental and Vision Insurance, • Short and Long Term Disability, • Life Insurance, Supplemental and Dependent Plans, • 401k with Company Match, • Accrued Paid Time Off, • Direct Deposit Paychecks, • Safety Training, • Employee Referral Program An Equal Opportunity Employer At LPX Group and our family of brands (Louisville Paving and Construction, Pace Contracting, Material Transfer, Bluegrass Testingand Bluegrass Blasting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned as required: Follow area-specific startup, production, or gaging (as applicable) utilizing standardized work instructions Adhere to condition standards, record readings where applicable, recognizing and reporting abnormalities Attach appropriate labels and tags to products and packages; scan product labels as required Understand and correctly use Kanban systems in assigned work areas Complete 100% production for scheduled Kanban parts/numbers during each assigned shift Report quickly and often any safety, quality and production issues which indicate work hazards, potential missed delivery or overtime possible to supervisor. Pack in-process or finished goods into correct packaging/returnable using proper inserts and techniques to avoid damage to products during transit on site or after shipment to customer Place in-process or finished good returnables or boxes into proper storage area, racks, roller system or other staging area for pulling to next process or shipment to customer Accurately track production and defects daily using assigned forms/scanning/entry daily Perform visual checks on products based on common quality problems per work instruction Use marking method per work instruction after inspection of part prior to packaging Perform First Middle Last (FML) checks during shift, subject to supervisor approval Visually troubleshoot problems with equipment, tools or process Communicate any quality problems using STOP-CALL-WAIT (contacting supervisor) Contact supervisor or production team leader immediately to report mechanical or tool issues Prepare in-process or raw materials to flow into the work cell in the correct sequence as applicable Keep raw materials bins full in order to maintain uninterrupted work flow Contact supervisor of any material issues (shortages, defects, etc) Understand Toyota Production System (TPS) basics in order to produce the parts in the most efficient and effective manner (Safety, Quality, Cost, Productivity, Delivery, Environmental, HRD) Implement basic Kaizen (continuous improvement) in daily process and work environment Apply 5S and 2S + 1Y cleaning & organizing techniques to work cell/department/break areas Work safely, following company-wide and department-specific safety rules, including job rotations Identify and wear proper Personal Protective Equipment (PPE) as prescribed by job/task Collect hazardous/non-hazardous/recyclable material or other wastes in correctly labeled containers, transferring them to collection areas Actively participate in monthly or quarterly inventory counts within department, section or division Must be available to work in all areas of production within the division (cross trained) Must follow company-wide procedures/policies/rules Adhere to visual stack height Kanban control Ability to withstand monotonous production without interfering with other peoples work i.e. talking, etc. Broad production jobs PTM’s could perform include, but are not limited to: *Injection Assembly; *Relief Technician; *Dandori; *Injection Molder; *Chrome Assembly/Prep/Inspector/Loader/Unloader;*Vibration Welder; SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis. Candidates must be able to pass job-related assessments as applicable which may include, but are not limited to: a pegboard dexterity (performance) test, vision/color test, a timed pencil & paper electronic assembly test, and an on-line reliability/achievement (behavioral) test, a fit-for-duty test to ensure ability to perform the essential functions of the job, a drug screen. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) will be considered primarily/preferred; in absence of GED or HS Diploma, must have 3 years or more experience in manufacturing and be willing to complete a GED within 12 months of hire. LANGUAGE SKILLS: Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between a series of numbers. Must be able to communicate both in simple written and verbal form. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed written/visual or oral instructions. Ability to deal with problems (problem-solve) involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Hazardous material handling certifications required for assigned duties within paint, chrome or other departments as required PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job on a regular basis. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job on a case-by-case basis. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, feel or pinch; reach with hands and arms; see, speak and hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. In accordance with our job specific tier testing, the employee must lift and carry between 20 to 100 pounds at various intervals and heights (floor to overhead), exert a pull force of 40 pounds or higher, exert a push force of 40 pounds or higher, and exert a pinch force of 10 pounds or higher. Specific vision abilities required by this job include close vision, peripheral vision, ability to adjust focus and differentiation of color. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions on a case-by-case basis. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and extreme heat. The employee is occasionally exposed to chemicals or fumes within prescribed limits

Job Description Quality Inspector I Day Shift $20.25 Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together – a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. What you’ll bring: • Ability to prioritize multiple responsibilities and manage deadlines accordingly, • Exceptional attention to detail with a high level of accuracy and organization, • Ability to communicate clearly and effectively with colleagues, • Ability to interpret complex construction plans and specifications, • Ability to prepare reports using Microsoft Word or Excel, • Ability to work effectively in a fast-paced production environment, • Knowledge of NSF standards and certifications, • Proficiency in Microsoft Office products, including Word and Excel, • Ability to multitask and work independently under pressure within tight deadlines, • Ability to define and troubleshoot issues, analyze and interpret data, evaluate options, and make recommendations, • Understand how your role supports Atkore’s strategy, • Complete all required training, • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401(k), • Paid Time Off, • Paid holidays

Job DescriptionDescription: Job Title: Clinic Nurse Employment Classification: Non-exempt, Hourly Schedule: Mon - Friday 8:00am-5:00. Provider start times may require you to be in the office as early as 7:15am-8:00am. You may be scheduled 1-3 nights per week to close the injection room & depending on the night you may be in the office until 5:30pm or 6:30pm. Metro territory travel can be as far North as CORYDON/MADISON IN to as far South as Campbellsville KY. Saturday rotation every 4-6 weeks may be slotted in at KYFC KYEE KYDUP INNA. Required to hold compact licensure Training may be scheduled at any one of our 19 Metro offices Position Summary The Clinic Nurse is responsible for demonstrating knowledge and application of job duties within scope of practice and functions under the direction of their manager(s) and/or Director(s); respectfully interacts with all levels of staff; provides direct nursing care during assigned duty hours; participates in department activities; promotes independence; adherence to the attendance policy; encourages socialization; advocates for the quality of life of our patients while maintaining compliance with all applicable laws, regulatory and organizational standards; supports the company’s core values. Summary of Duties and Responsibilities • Get rooms ready for patients and prepare for allergy testing each morning, • Calibrate PFT sensor daily, • Escort patients to a treatment room and prepare them for the doctor’s visit, • Assist the doctor with skin testing and other procedures as ordered, • Send prescriptions, complete asthma care plans and discharge summaries, • Complete documentation in the EMR system, • Prepare and administer any medications requested by the doctor, • Pulmonary function testing, FeNO testing, and peak flow monitoring, • Patient education regarding medications and environmental control, • Prepare and administer nebulized medication and patient education (if needed), • Scan testing sheets, • Schedule appointments for outpatient procedures, • Administer allergy injections and complete all duties of the shot room, • Keep clinical area and exam rooms organized and stocked with supplies, • Keep samples and sample bags stocked on shelves, • Communicate with injection room staff when emergency medications are used and need to be reordered, • Check refrigerator temperatures daily and log on chart, • Complete all tasks in Triage when scheduled, • Prepare patient information folders and Environmental Control packets, • Prepare I.D. and scratch trays, • Shut down and plug in computers (pack, if needed), and plug in otoscopes at end of day, • Transport supplies (box) to and from satellite offices as needed, • Maintain and follow HIPAA policies and procedures, • Order supplies, as necessary, through the approved clinic procedure, • Cover Injection Room and/or Front Offices as needed, • Train new staff as needed, or directed, • Other relevant duties as assigned by Director, • Work with Healix & Specialty pharmacies to process Biologics/IVIG prescriptions and forms:, • Obtain prior authorizations as needed Effective communication skills to include: • Ability to fluently speak and read English, • Ability to read and interpret documents such as safety rules, handbooks, policies, patient care plans and procedure manuals Diploma in Nursing- LPN/RN with an active and unrestricted Nursing License, or an eNLC multistate nursing license 1 to 2 years nursing experience in an office setting, preferred Previous allergy/asthma experience preferred CPR certification required Valid Driver’s License required Active CPR Certification Acceptable results on Office of Inspector General, State Medicaid Exclusions, Abuse Registry Checks, Background Screenings, Drug Screen, and Sanction Checks Ability to travel to satellite offices as needed Must be at least 18 years of age Physical Demands and Work Environment Physical Demands The physical demands described, here, are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the physical demands. While performing the duties of this job, the employee is regularly required to use hands to handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. • The employee frequently is required to stand, walk, stoop, kneel, crouch, reach, push, pull, bend and sit. On average, injection room or clinic staff may be standing or walking 80% of their shift., • The employee must occasionally lift and/or move up to 30 pounds., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. • The noise level in the work environment is usually moderate; lighting is in the standard range. Family Allergy & Asthma provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Requirements: