Maintenance technician jobs in Fort Worth, Texas - Page 6Create job alerts

Off-campus student homes in Fort Worth, TX is seeking an experienced and personable Maintenance Technician. Responsibilities Complete all repairs and improvements before tenant move-in Inspect vacated units, complete checklists, and report to office staff Handle trash removal, caulking, sheetrock, p

Job Description At AC Hero and Plumbing, we believe exceptional service starts with exceptional people- and that’s you! We set out to raise the bar for what customers expect from HVAC and plumbing professionals: show up with integrity, fix problems the right way, and treat every customer like family. If you’re an experienced Commercial HVAC Technician with hands-on experience working on RTU's and boilers and you want to join a team that genuinely supports you, we’d love to connect. Here, you’re more than just a tech- you’re the one who saves the day! Responsibilities: • Diagnose, troubleshoot, and repair commercial chillers, RTU's, boilers, and related HVAC equipment., • Perform scheduled maintenance and inspections to ensure peak system performance., • Respond to emergency service calls with speed and professionalism., • Work independently and efficiently while maintaining detailed service records., • Communicate effectively with customers and team members to explain repairs and recommend long-term solutions., • Minimum of three (3) years of experience working on commercial chillers, boilers & RTUs, • Strong knowledge of HVAC systems, with the ability to troubleshoot and repair independently., • EPA Certification required., • Valid Driver’s License with a clean driving record., • Willingness to be part of a rotating on-call schedule, we share the load fairly so everyone gets their time off., • The ability to pass a pre-employment background check., • Company-paid health, dental, and vision insurance., • Company vehicle, tablet, phone., • 401 (k) with match up to 3%, • Employee discount. Powered by JazzHR E1iUPsXnZd

Job Description BFC Solutions is launching an exciting new project with a major national customer and we are looking for motivated, dependable people to join our team! The right candidate will cross train in the maintenance of commercial refrigeration cases as well as HVAC preventative maintenance. This is not an HVAC repair or installation position, and it will not become one as we only provide maintenance services! The preferred location of residence for this position is in the Arlington or Grand Prairie area! Why Join BFC Solutions? • 401(k) with employer matching, • Health, dental, and vision insurance, • Company vehicle and company-provided cell phone, • Paid time off and 8 paid holidays, • Excellent advancement opportunities, • Paid training, • Tools, uniforms, and supplies provided What You Will Do: • Clean and maintain refrigeration and display cases in retail and commercial environments, • Support preventative maintenance initiatives for nationally recognized brands, • Travel to job sites as part of a mobile team, • Work independently with remote supervision and support, • Use company and customer technology platforms to document work, • Opportunity to transition into a Service Technician role working on HVAC systems and rooftop air ventilation equipment What We Are Looking For: • Minimum age of 21 (for company vehicle insurance), • Valid driver’s license with a good driving record, • Comfortable working at heights up to 40 feet and using extension ladders, • Ability to meet OSHA ladder safety requirements, • Weight under 275 lbs due to ladder restrictions, • Ability to work outdoors in all weather conditions, • Ability to lift and carry up to 75 lbs repeatedly, • Willingness to work 45–50 hours per week if needed, • Strong work ethic, integrity, and customer service mindset, • Comfortable using technology and working independently Preferred Experience: • Commercial HVAC maintenance, • Construction or roofing work, • Cable installation or route-based work, • Facility or grounds maintenance, • Delivery, installation, or field service roles At BFC Solutions, we value our technicians. From paid training to long-term career growth, you’ll have the support, tools, and opportunities to succeed in a growing industry.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for Low Voltage Project Technicians for service and project work at various locations across the United States. This position is responsible for installing, troubleshooting, and repairing structured cabling systems in various environments. This full-time position requires travel and a willingness to learn and help in other structured cabling environments if needed. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits--No premium cost!, • Life, AD&D and LTD insurance, • Paid Vacation and Holidays, • MD Live, TriaHealth, Legal and Identity Theft Monitoring, • Company-Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of personal vehicle when travel is requiredRequirements:, • Experience as a Data Cable Technician., • Strong background in installing and troubleshooting structured cabling systems in retail environments., • Must hold a current valid State required license(s) for low voltage/burglar alarm/fire alarm/security/CCTV., • Available for extensive travel., • Flexible and willing to work on-call, day or night shifts as the jobs require., • Experience reading blueprints and site maps., • Experience in CCTV, Voice, and Fire Alarm cabling is a plus., • Knowledgeable in identifying independent colors and learning color codes., • Ability to work in cramped spaces., • Experience working with Copper and Fiber., • Ability to operate a BOOM or scissor lift, and ability to work at heights., • Has PPE, basic telecommunication tools, and hand tools., • Reliable transportation with required insurance coverage., • Must have knowledge of cabling infrastructure., • Great communication skills; verbal and written., • Excellent customer relationship skills., • Highly proficient with the use of email, spreadsheets, and the ability to learn internal systems., • Experience in conduit installation is a plus., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Installation, troubleshooting, and maintenance of various cabling infrastructure., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Assist with pre-installation opportunities by designing and planning technical solutions, • Installing of cable support structures such as j-hooks, cable racks, and innerduct., • Conduct tests to ensure all newly installed cable systems and component devices are operational., • Troubleshoot issues with cable networks., • Ensure electrical systems meet local, county, state, or federal codes; legal and/or insurance requirements., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA.

Job Description Mechanical Engineering Technician Location: Fort Worth Alliance, TX Department: PME Department Reports To: Tom Chao Employment Type: Full-Time Position Summary Responsible for supporting engineers in the design, development, testing, and maintenance of mechanical systems and components. Key Responsibilities • Assemble server/system units per SOP/WI (modules, screws, cables, mechanical parts)., • Install and remove PCBA while following ESD rules., • Use torque tools, power drivers, and hand tools for accurate fastening., • Support Pilot Run, NPI, and build activities., • Assemble, maintain, label, and validate production fixtures., • Manage fixture check-in/out and perform basic inspections to ensure readiness., • Support production stations as needed., • Report mechanical/assembly issues and assist with basic troubleshooting. Education & Experience • High school diploma or above; technical majors Mechanical/Electronics/IE) preferred., • Experience in server/system assembly, PCBA handling, or manufacturing operations preferred.

Job DescriptionCertified Pre-Owned (CPO) Technician Skilled automotive professional responsible for transforming used vehicles into "certified" inventory by performing rigorous multi-point inspections and mechanical reconditioning. Ensure vehicles meet stringent manufacturer standards for safety, reliability, and performance before being sold with extended warranties. Will be responsible for inspecting vehicles, diagnosing issues, completing repairs and parts replacements, and carrying out routine maintenance procedures to support the longevity of all vehicles that come through the shop. Key Responsibilities • Multi-Point Inspections: Conduct exhaustive evaluations (often 150+ to 190 points) covering engine performance, electrical systems, brakes, and safety components., • Diagnosis & Repair: Identify and fix malfunctions in complex systems, including transmissions, drivetrains, and electronic controls., • Mechanical Reconditioning: Perform routine maintenance such as oil changes, fluid flushes, and tire replacements to bring vehicles to "like-new" condition., • Documentation: Maintain meticulous records of all repairs and inspections to satisfy manufacturer warranty requirements and state safety standards., • Road Testing: Conduct test drives both before and after repairs to verify vehicle stability and ensure all issues are resolved. Required Qualifications, • Certifications: Prefer ASE (Automotive Service Excellence) certifications., • Experience: Requires 2–5 years of automotive repair experience, particularly in a dealership or high-volume service environment., • Technical Skills: Proficiency with advanced diagnostic tools, computerized engine analyzers, and specialized shop equipment., • Legal Requirements: A valid driver’s license with a clean driving record and a state inspector’s license.

Job Description Position Summary: Sets up and operates CNC lathes/mills on all product parts with proven and unproven programs. Produces machined fittings per blueprint specifications and work instructions. Perform routine preventative maintenance on equipment. Contributes to lean initiatives to increase productivity and reduce costs. Works independently with minimum guidance in a team environment. SCHEDULE: 2nd Shift - 3:30pm- 12:00AM (Mon-Fri) . CNC Machinist Technician - Lathe (Mill Exp a plus) 5 or more years of experience Primary Responsibilities/Essential Functions: • Runs multiple machines efficiently, which may require simultaneous operations. Adapts or improvises tooling to accomplish results where operations require a broad knowledge of production machining technology, operating skills, and shop techniques together with diversified experience., • Creates standard machining programs using I.G.F Software. Proves out and edits programs., • Interfaces with engineering to resolve drawing errors, suggest design changes, and solve product/process problems., • Implements manufacturing methods using standard production machines, materials, and tooling. May advise and assist with tooling design., • Makes complex setups, which may include multiple work piece stations, utilizing custom and standard holding devices., • Develops and defines processes with limited documentation, as required., • Trouble shoots and resolves machining problems., • Responsible for machining and checking parts to maintain a high level of quality and efficiency., • Inspects finished parts for conformance to specifications by visual examination, and utilizes precision measuring instruments such as gages, calipers, micrometers, comparators, and surface plate techniques. May be required to use coordinate measuring machine (CMM). Ensures equipment is calibrated in accordance with schedule., • Routinely maintains equipment to ensure cleanliness, accuracy, and reliability specific to division requirements., • Accurately and regularly performs statistical process control (SPC) specific to division requirements., • Uses advanced shop mathematics, which may include trigonometry, and general knowledge of metal characteristics and other processing requirements., • Actively contributes to lean/continuous initiatives by identifying and providing suggestions on areas for improvement. Effectively applies lean concepts and tools in work areas., • Provides guidance or assistance in coordinating workload priorities to make appropriate accommodations based on business demand., • Maintains a satisfactory high level of performance while following appropriate procedures and observing all pertinent safety rules and requirements, • Maintains appropriate knowledge and ability levels to efficiently perform all assigned work and utilizes this knowledge base to become proficient on new/unfamiliar assignments, • Observes all company policies and procedures, including safety rules, and maintains a clean and orderly work area. Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as required to meet the ongoing needs of the organization Qualifications (relevant experience, education and training): • Requires High School Diploma or equivalent and five or more years related machining experience in a high technology manufacturing environment. Able to work with minimum supervisory guidance in a team environment., • Able to set up and run a minimum of five CNC machine types., • Handles multiple tasks with changing priorities to meet customer needs., • May require specialized certification specific to division requirements (i.e. certified operator)., • Reads, understands, and follows blueprints, complex drawings, engineering specifications, and informal written or verbal instructions., • Able to make and evaluate precision machine set ups on a minimum of five CNC machine types., • Has working knowledge of advanced shop mathematics, may include trigonometry., • Able to implement lean/continuous improvement initiatives., • Must be able to read and understand written and verbal instructions, procedures, drawings and blueprints., • Demonstrates effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment on research and solution development., • Possesses effective mentoring and training skills and ability to serve as a resource to other team members. Additional Comments: The essential functions have been provided as examples of the type of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The job description is not intended to be an all-inclusive list of duties and responsibilities. It is intended to describe the general nature of the position.

Job Description Gearheart Construction is hiring! We are looking for a dependable, experienced Jack of All Trades / Maintenance Technician to join our Maintenance Department immediately. If you’re someone who can handle a wide range of repair and maintenance tasks with confidence and professionalism, we want to hear from you. Position: Full-Time Maintenance Technician Department: Maintenance Start Date: ASAP What We’re Looking For: • Strong general maintenance and repair skills, • Experience with basic plumbing, electrical, carpentry, drywall, painting, and general repairs, • Ability to troubleshoot and solve problems independently, • Reliable transportation, • Strong work ethic and attention to detail, • Full-time, steady work, • Paid holidays, • Healthcare benefits, • Competitive pay based on experience If you’re ready to get started with a solid team and a company that values your skills, apply today. Gearheart Construction Office: 817-737-8935

Job Description Univesco, Inc. is an established, family-owned and managed property management company headquartered in Plano, Texas. With over four decades of experience, we own and operate more than 4,000 apartment units across Texas and Florida. We are seeking an experienced, dependable, and detail-oriented Make-Ready Technician to prepare vacant apartment homes for new residents at one of our DFW-area communities. In this role, you’ll play a key part in ensuring every unit is restored to top-notch, market-ready condition. Key Responsibilities: • Inspect vacated units and complete unit turns to market-ready condition using make-ready checklists, • Perform cleaning, painting, minor repairs (e.g., drywall, caulking, fixtures), and appliance checks, • Replace or repair items as needed, such as lights, locks, screens, and flooring, • Coordinate with the team to prioritize tasks and meet turnover timelines, • Maintain a safe, clean work environment and assist with occasional groundskeeping or preventative maintenance Qualifications: • At least one (1) year of proven experience in multi-family/apartment maintenance, turnover work, or related field, • Ability to work independently with strong time management and prioritization skills, • Keen attention to detail and commitment to quality workmanship, • Basic knowledge of tools and common repair techniques (painting, plumbing basics, electrical basics a plus), • Basic computer skills for work-order systems (Yardi experience a plus), • Professional communication skills and a customer-service mindset What We Offer: • Generous pay, • Comprehensive benefits package including medical coverage, paid time off, and 401(k), • Opportunities for growth and advancement To Apply: Please respond to the ad. Univesco, Inc. is an Equal Opportunity Employer. Background checks are conducted on all final candidates. Company DescriptionUnivesco, Inc. is a family-owned Property Management Company with 40+ Years in the Industry.Univesco, Inc. is a family-owned Property Management Company with 40+ Years in the Industry.

Job DescriptionTechnician – Fiber Installations Reports to: Manager – Fiber Installation Job Summary: Centric Services (“Centric”) delivers industry-leading high-speed internet through Centric Fiber and natural gas services through its UniGas division. Centric serves ground-up commercial and residential developments, as well as master-planned communities in all major metropolitan markets across Texas and Central Florida. As the only integrated telecom and natural gas provider currently in the market, Centric is rapidly expanding into new regions due to its advantageous dual-model approach. Our team is dedicated to bridging infrastructure gaps through strategic value creation and continuous innovation. The Technician – Fiber installations is the main interface for home builders and subscribers in residential communities. This role is responsible for performing fiber splicing, residential home installations, preparing, and troubleshooting fiber optic cables and systems for Centric Fiber customers. The position is field-based, requiring daily reporting to the office and traveling into Centric communities. Responsibilities: · Perform fiber splicing, testing, and troubleshooting of fiber optic cables and connections. · Point of contact for 3rd party contractors for troubleshooting. · Conduct residential home installations of internet, phone, TV, and cable services. · Provide customer assistance, education, and information on Centric services, customer equipment, and products. · Troubleshoot and resolve service issues on-site. · Upsell applications and additional equipment to customers when appropriate. · Take appropriate action to expedite workflow to consistently meet customer appointments and company commitments. · Interface with customer and technical service departments to collaborate on subscriber issues, develop troubleshooting and corrective action plans, work scheduling, and ticket clearing. · Install, service, disconnect, change, or reconnect telephone and modem equipment, serving customer residences. · Install, service, disconnect, change, or reconnect for television and provisioning in MAUI system. · Provide general maintenance and troubleshooting for FDHs. · Assist ISP tech with troubleshooting and maintenance of distribution cabinets. · On call support for after-hours and weekend issues. · Support region with rollout of new equipment and software rollouts. · Ensure all work is completed in accordance with company procedures and in compliance with municipal, state, and federal laws and guidelines. · Participate in community and company social media outlets – monitor company commentary, respond to complaints and accolades, and monitor community happenings. Requirements · High School Diploma or GED. · 2+ years of related telecommunications or mass media experience. · Previous customer service experience. · Valid driver’s license and clean driving record. · Ability to work hours that may include evenings, weekends, and holidays if necessary. · Must be able to work effectively with a team in a fast-paced environment. · Up to 100% local market travel and up to 10% travel to all markets in Texas. Preferred Requirements: · College-level training in telecommunications or mass media. · Prior fiber splicing experience strongly preferred. Benefits · Competitive base pay · Great benefits (medical, dental, vision, and more) · Generous PTO policy · 10 company-paid holidays · 401(k) plan with 5% company match Centric Infrastructure Group is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Ford Certified Technician Ford of Arlington seeks a certified, experienced, and innovative Service Technician for complex diagnostics and maintenance on all vehicle areas, including specialized Ford systems, to join their team. The ideal candidate will perform advanced repairs, demonstrate leadership potential, and provide high-quality service to ensure customer satisfaction. Employee Benefits & Compensation Package: • Paid time off (PTO) and Holiday pay, • Company paid life insurance, • Health and wellness plans, • Medical, dental, vision, and supplemental insurance, • Flexible Spending accounts, • Financial retirement plans WITH COMPANY MATCHING, • 401K and ROTH, • Diagnose and Collaborate, • Inspect malfunctioning equipment and accurately diagnose mechanical issues. The Service Technician will devise a repair plan, secure the necessary components with the Parts Department, and team up with management and other technicians to confirm efficient and effective service., • Install, Repair, and Maintenance, • Install new equipment or systems and perform routine maintenance to guarantee optimal performance of the customer's vehicles., • Customer Interaction and Problem Solving:, • Assist customers to understand their needs, explain diagnoses, and provide solutions to ensure service satisfaction. The Service Technician will trouble shoot and resolve issues effectively., • Document and Report, • Technician knowledge/experience is REQUIRED. Pay is based on experience., • Certifications, Licenses, and local registrations required for the position., • Ability to read and interpret documents such as safety rules, operating, maintenance, and procedure manuals., • Flexible schedule Full-time We are an Equal Opportunity Employer. Applicants must be 18 years or older and be authorized to work in the United States. Applicants must have a valid driver's license and must complete the pre-employment screening. #75017 #75015 #75016 #75014 #75018 #76001 #76140 #76060 #76063 #76065 #76084 #75050 #75051 #75052 #75053 #75054 #75060 #75104 #76002 #76006 #76010 #76018 #76040 #76155 #Arlington #Kennedale #Mansfield #GrandPrairie

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a Specialist, Process Controls to provide hands-on support for the process control systems that drive our metal, alloy, and magnet-making facility. This role is designed for a skilled technician with experience in troubleshooting and maintaining PLCs, HMIs, and industrial process control systems. The ideal candidate will support daily plant operations, lead equipment-based improvements, and contribute to the implementation of OPEX projects and continuous improvement initiatives across a complex, high-tech manufacturing environment. Position Responsibilities: • Participate and execute OPEX-focused electrical projects aimed at improving energy efficiency, reducing utility spend, and enhancing operational reliability., • Provide hands-on technical support for plant process control systems, including routine checks, basic maintenance, and troubleshooting equipment or system faults., • Provide daily technical support for plant process control systems, including troubleshooting and maintaining PLCs, HMIs, VFDs, sensors, and safety systems to ensure smooth and safe operations., • Respond to process control-related issues as part of an on-call rotation, including after-hours support as needed., • Assist in implementing and maintaining standard operating procedures for process control systems and support response protocols., • Support troubleshooting efforts led by engineers to minimize downtime and ensure continuous improvement of system performance., • Document and report system issues, maintenance actions, and resolution outcomes to engineering leadership., • Perform routine inspections of process control equipment to identify and report wear, potential failure points, or improvement opportunities., • Support continuous improvement (CI) and OPEX projects by implementing changes to process control systems, improving equipment functionality, and reducing downtime., • Perform hands-on installation, testing, and calibration of process control components—such as instrumentation, control panels, and field devices., • Read, interpret, and redline electrical schematics, P&IDs, panel layouts, and wiring diagrams for existing or modified systems., • Support the programming, configuration, and maintenance of process control platforms including Rockwell (Studio 5000), FactoryTalk View, and Siemens TIA Portal., • Conduct preventive and predictive maintenance of process control systems; perform software backups, maintain change logs, and document all control system activities., • Interface regularly with operators, maintenance, engineering, and EHS teams to ensure process control systems meet operational and safety requirements., • Assist with commissioning and startup of new or modified process control systems, ensuring compliance with performance specifications., • Use diagnostic tools (e.g., multimeters, oscilloscopes, network analyzers) to test and troubleshoot control signals and communications., • Collaborate with other technicians, operators, and engineering staff to support safe, efficient plant operations., • Support training efforts for maintenance and operations staff to improve system knowledge and troubleshooting capabilities., • Associate degree or equivalent technical certification in Electrical Engineering Technology, Industrial Automation, Mechatronics, or a related field., • 3+ years of hands-on experience working with PLC and HMI-based process control systems in an industrial or manufacturing environment., • Proficiency in reading, interpreting, and modifying control system documentation such as electrical drawings and schematics., • Hands-on experience with Rockwell (Allen-Bradley), Siemens, or similar process control platforms., • Familiarity with industrial communication protocols: EtherNet/IP, Profinet, Modbus TCP., • Comfortable working in an industrial environment with chemical, mechanical, and thermal processes., • 5+ years of process control or automation experience in a manufacturing setting., • Proactive, self-motivated, and comfortable taking ownership of process control-related issues., • Strong troubleshooting skills with an analytical approach to solving electrical/control problems., • Familiarity with robotics, vision systems, or motion control technologies is a plus., • Comfortable balancing multiple priorities and adapting to dynamic production demands., • Basic CAD skills for modifying electrical schematics (AutoCAD Electrical preferred)., • Knowledge of SCADA systems and virtualized environments is a plus., • Excellent verbal and written communication skills; able to clearly document work and collaborate across departments. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionINDUSTRIAL MAINTENANCE TECHNICIAN 1st & 2nd Shift in Fort Worth, TX Summary:Performs schedule/unscheduled maintenance on the physical plant, electrical, mechanical and electronic repairs and troubleshooting to determine problems in non-functioning CNC-control mechanical equipment used in the manufacturing process. MUST HAVE ELECTRICAL 480v, PNEUMATIC, and HYDRAULIC ExperienceDUTIES AND RESPONSIBILITIES: • All facility maintenance mechanical, electrical, electronic, and the physical condition of building., • Conduct machine setup., • Performs routine preventive maintenance tasks to ensure that machines continue to run smoothly., • Performs scheduled maintenance on plant equipment and machinery., • Performs preventive maintenance repairs and trouble shoot overhead cranes., • Installing, repairing/replaces worn/defective parts, motors, control devices, electronics, etc., and troubleshooting all equipment., • Diagnose mechanical, electrical and electronic problems and determine how to correct them, repair manuals, and parts catalogs as necessary., • Inspect, operate, and test machinery and equipment in order to diagnose machine malfunctions., • Record maintenance and repair worked performed., • Dismantle devices to gain access to and remove defective parts, using hoists, cranes, hand tools and power tools., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Comply with OSHA Safety and Health rules., • Perform other duties as assigned or needed.MINIMUM JOB REQUIREMENTS:, • Must have 5 or more years experience in dealing with maintenance in a manufacturing environment., • Experience in Electronics, Electrical repairs, Industrial Equipment installations, alignment, start-up repairs, cranes, etc., • Must have recent and stable work history., • Must have experience with operating basic hand tools. #vipstaffingftw#zrfw#google

Job Description Company Overview: Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: We are seeking a hands-on Senior Technician, Characterization to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets. The Technician, Characterization will be responsible for running a variety of analytical tests to provide critical data for process development, including but not limited to ICP-OES, LECO CS/ONH, optical and electron microscopy, metallographic sample preparation, XRD, XRF, thermal analysis, and magnetometry. This is a rare opportunity to play a key role in returning an essential manufacturing capability to the USA. Position Responsibilities: • Perform advanced and routine analyses using ICP-OES, LECO CS/ONH, optical and electron microscopy, metallographic sample preparation, XRD, XRF, thermal analysis, and magnetometry, ensuring accurate and reliable results., • Prepare and digest ICP-OES samples using appropriate wet chemistry techniques (acid digestion, fusion, etc.)., • Metallographic sample preparation, e.g. cutting, mounting, and polishing., • Troubleshoot instrument performance issues and perform routine maintenance and calibration., • Clearly document and communicate results and methods, including creation of reports and standard work instructions., • Train and mentor junior technicians to ensure high-quality execution of experimental trials and data collection, providing technical guidance in analytical techniques, and fostering a culture of continuous learning and professional development., • Maintain a clean, organized, and safe workplace., • Handle corrosive and hazardous chemicals with proper PPE and safety protocols, and ensure laboratory safety, compliance with regulatory guidelines, and proper chemical waste handling., • Associate’s degree in chemistry or a related field., • 5+ years experience working in a wet chemistry lab or analytical lab, preparing samples and operating sensitive instruments., • Strong attention to detail., • Strong discipline in following safety practices and standard work instructions., • Ability to work independently and as a part of a collaborative research team., • Comfortable with record keeping in both physical and electronic formats., • Ability to work in a fast-paced environment managing multiple priorities. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-625-5679; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionBenefits: • Employee discounts, • Flexible schedule, • Free uniforms If youre mechanically inclined, reliable, and enjoy working outdoors, this entry-level technician role is your first step toward a real trade career. What You Get • Competitive hourly base pay + monthly performance bonuses, • Commission for upselling additional property services (like window washing or gutter guard installs), • Commission for new business (booking future services or multi-property packages), • Cash bonuses for 5-star Google reviews and customer referrals, • Paid time off and flexible schedulingWhat You'll Do, • Start your day by prepping and cleaning your HomeSmiles service van, restocking tools and equipment, • Use your mobile tablet to check your route and scheduled appointments, • Meet with homeowners or property managers to confirm service details, • Identify equipment issues and troubleshoot hoses, pumps, ladders, and sprayers, • Track and maintain tool inventory and alert team lead when replacements are neededWho You Are, • Comfortable working on ladders, roofs, and in outdoor conditions, • Mechanically inclined with the ability to learn power tools, water-fed poles, squeegee systems, and rotary dryer vent tools, • Willing to learn how to clean gutters, wash windows, power wash surfaces, and complete all property maintenance services, • Gutter Cleaning & Downspout Clearing, • Window Washing (Exterior/Interior Glass, Frame Detailing, Hard Water Removal), • Dryer Vent Cleaning (Fire Prevention and Efficiency), • Power Washing / Pressure Washing (Walkways, Siding, Decks, Driveways)Fast Hiring Process:, • Phone interview scheduled within 24 hours, • In-person interview set within 48 hours, • Receive offer letter and meet the owner for lunch within 7 days

Description 2nd Shift 3:30pm- 12:00AM (Mon-Fri) Please ensure candidates are fully aware that they will be required to train on first shift for at least two months. Their performance during this period will determine when they can transition to the second shift permanently*. CNC Machinist Technician - Lathe (Mill Exp a plus) 5 or more years of experience Position Summary: Sets up and operates CNC lathes/mills on all product parts with proven and unproven programs. Produces machined fittings per blueprint specifications and work instructions. Perform routine preventative maintenance on equipment. Contributes to lean initiatives to increase productivity and reduce costs. Works independently with minimum guidance in a team environment. Primary Responsibilities/Essential Functions: Runs multiple machines efficiently, which may require simultaneous operations. Adapts or improvises tooling to accomplish results where operations require a broad knowledge of production machining technology, operating skills, and shop techniques together with diversified experience. Creates standard machining programs using I.G.F Software. Proves out and edits programs. Sets ups, adjusts, and operates a variety of conventional and/CNC lathes/mills to perform the most diversified and difficult production operations on work having close and exact tolerances, several dimensional relationships, unusual contours, dimensional and finish requirements. Interprets customer requirements from blueprints, complex drawings, engineering specifications, quality directives, charts, tables, sketches, and verbal instructions. Interfaces with engineering to resolve drawing errors, suggest design changes, and solve product/process problems. Implements manufacturing methods using standard production machines, materials, and tooling. May advise and assist with tooling design. Makes complex setups, which may include multiple work piece stations, utilizing custom and standard holding devices. Develops and defines processes with limited documentation, as required. Trouble shoots and resolves machining problems. Responsible for machining and checking parts to maintain a high level of quality and efficiency. Inspects finished parts for conformance to specifications by visual examination, and utilizes precision measuring instruments such as gages, calipers, micrometers, comparators, and surface plate techniques. May be required to use coordinate measuring machine (CMM). Ensures equipment is calibrated in accordance with schedule. Routinely maintains equipment to ensure cleanliness, accuracy, and reliability specific to division requirements. Accurately and regularly performs statistical process control (SPC) specific to division requirements. Uses advanced shop mathematics, which may include trigonometry, and general knowledge of metal characteristics and other processing requirements. Trains and mentors less experienced team members. Secondary Responsibilities/Non Essential Functions: Actively contributes to lean/continuous initiatives by identifying and providing suggestions on areas for improvement. Effectively applies lean concepts and tools in work areas. Provides guidance or assistance in coordinating workload priorities to make appropriate accommodations based on business demand. Maintains a satisfactory high level of performance while following appropriate procedures and observing all pertinent safety rules and requirements Maintains appropriate knowledge and ability levels to efficiently perform all assigned work and utilizes this knowledge base to become proficient on new/unfamiliar assignments Observes all company policies and procedures, including safety rules, and maintains a clean and orderly work area. Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as required to meet the ongoing needs of the organization Qualifications (relevant experience, education and training): Requires High School Diploma or equivalent and five or more years related machining experience in a high technology manufacturing environment. Able to work with minimum supervisory guidance in a team environment. Able to set up and run a minimum of five CNC machine types. Handles multiple tasks with changing priorities to meet customer needs. May require specialized certification specific to division requirements (i.e. certified operator). Reads, understands, and follows blueprints, complex drawings, engineering specifications, and informal written or verbal instructions. Able to make and evaluate precision machine set ups on a minimum of five CNC machine types. Has working knowledge of advanced shop mathematics, may include trigonometry. Able to implement lean/continuous improvement initiatives. Must be able to read and understand written and verbal instructions, procedures, drawings and blueprints. Demonstrates effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment on research and solution development. Possesses effective mentoring and training skills and ability to serve as a resource to other team members. Additional Comments: The essential functions have been provided as examples of the type of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The job description is not intended to be an all-inclusive list of duties and responsibilities. It is intended to describe the general nature of the position. Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

About Us: HIGHLIGHTS: NEW PRN RATES! SHIFT : Day Shift (7am-7pm) JOB TYPE : PRN FACILITY TYPE : 16 bed Small-Format Hospital (8 ER, 8 Inpatient) We are Emerus, the leader in small-format hospitals. We partner with respected and like-minded health systems who share our mission: To provide the care patients need, in the neighborhoods they live, by teams they trust. Our growing number of amazing partners includes Allegheny Health Network, Ascension, Baptist Health System, Baylor Scott & White Health , ChristianaCare, Dignity Health St. Rose Dominican, The Hospitals of Providence, INTEGRIS Health, MultiCare and WellSpan. Our innovative hospitals are fully accredited and provide highly individualized care. Emerus' commitment to patient care extends far beyond the confines of societal norms. We believe that every individual who walks through our doors deserves compassionate, comprehensive care, regardless of their background, identity, or circumstances. We are committed to fostering a work environment focused on teamwork that celebrates diversity, promotes equity and ensures equal access to information, development and opportunity for all of our Healthcare Pros. Position Overview: The purpose of this position is to perform a variety of imaging procedures, including CT and X-Rays, at a technical level not requiring constant supervision. Essential Job Functions: • Provide technical assistance and supportive patient care to assist the physicians, nurses and other technical and administrative staff in meeting the needs of individual patients throughout the facility., • Operate and maintain all imaging department equipment including but not limited to X-Ray, CT, CR reader, and PACS, • Perform all imaging exams in accordance with established policies, procedures, regulations, and laws and ensure the physician on duty is notified of the results, • Perform basic clinical procedures under the direction of the physician and/or nurse on duty, • Maintain all required documentation, logs, charts, forms and records in paper and electronic formats, • Collect laboratory samples and perform lab testing in accordance with established policies and procedures, as well as COLA and CLIA regulations, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Perform Quality Control as established by this laboratory, • Perform Proficiency Testing and/or Split Sample analysis periodically as established by this facility, • Retain records of all analytic activities performed for a minimum of two years, • Perform all Quality Assessment activities assigned to this position and document these activities for periodic review by the Laboratory Supervisor and/or the Laboratory Director Other Job Functions:, • Perform duties as ER Technician as needed, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Travel to all facility locations as required, • Attend staff meetings or other company sponsored or mandated meetings as required, • Perform additional duties as assigned Basic Qualifications:, • High School diploma or GED, required, • Graduation from an AMA-approved school of Radiology Technology, required, • Associate's Degree in Radiology, preferred, • Certified as a medical radiologic technologist as required by the state in which practicing, required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in radiography required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in computed tomography, preferred, • CT certification required within 12 months of hire (Pennsylvania market), • Current BLS certification through the American Heart Association, required, • 2+ years radiologic/imaging experience, preferred, • 1+ years of CT experience, preferred, • 1+ years of emergency room experience, preferred, • Proficiency with most X-ray/CT equipment, manufacturer's hardware/software and PACS, • Position requires fluency in English; written and oral communication

About Us: HIGHLIGHTS: NEW PRN RATES! SHIFT : Day Shift (7am-7pm) JOB TYPE : PRN FACILITY TYPE : 16 bed Small-Format Hospital (8 ER, 8 Inpatient) We are Emerus, the leader in small-format hospitals. We partner with respected and like-minded health systems who share our mission: To provide the care patients need, in the neighborhoods they live, by teams they trust. Our growing number of amazing partners includes Allegheny Health Network, Ascension, Baptist Health System, Baylor Scott & White Health , ChristianaCare, Dignity Health St. Rose Dominican, The Hospitals of Providence, INTEGRIS Health, MultiCare and WellSpan. Our innovative hospitals are fully accredited and provide highly individualized care. Emerus' commitment to patient care extends far beyond the confines of societal norms. We believe that every individual who walks through our doors deserves compassionate, comprehensive care, regardless of their background, identity, or circumstances. We are committed to fostering a work environment focused on teamwork that celebrates diversity, promotes equity and ensures equal access to information, development and opportunity for all of our Healthcare Pros. Position Overview: The purpose of this position is to perform a variety of imaging procedures, including CT and X-Rays, at a technical level not requiring constant supervision. Essential Job Functions: • Provide technical assistance and supportive patient care to assist the physicians, nurses and other technical and administrative staff in meeting the needs of individual patients throughout the facility., • Operate and maintain all imaging department equipment including but not limited to X-Ray, CT, CR reader, and PACS, • Perform all imaging exams in accordance with established policies, procedures, regulations, and laws and ensure the physician on duty is notified of the results, • Perform basic clinical procedures under the direction of the physician and/or nurse on duty, • Maintain all required documentation, logs, charts, forms and records in paper and electronic formats, • Collect laboratory samples and perform lab testing in accordance with established policies and procedures, as well as COLA and CLIA regulations, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Perform Quality Control as established by this laboratory, • Perform Proficiency Testing and/or Split Sample analysis periodically as established by this facility, • Retain records of all analytic activities performed for a minimum of two years, • Perform all Quality Assessment activities assigned to this position and document these activities for periodic review by the Laboratory Supervisor and/or the Laboratory Director Other Job Functions:, • Perform duties as ER Technician as needed, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Travel to all facility locations as required, • Attend staff meetings or other company sponsored or mandated meetings as required, • Perform additional duties as assigned Basic Qualifications:, • High School diploma or GED, required, • Graduation from an AMA-approved school of Radiology Technology, required, • Associate's Degree in Radiology, preferred, • Certified as a medical radiologic technologist as required by the state in which practicing, required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in radiography required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in computed tomography, preferred, • CT certification required within 12 months of hire (Pennsylvania market), • Current BLS certification through the American Heart Association, required, • 2+ years radiologic/imaging experience, preferred, • 1+ years of CT experience, preferred, • 1+ years of emergency room experience, preferred, • Proficiency with most X-ray/CT equipment, manufacturer's hardware/software and PACS, • Position requires fluency in English; written and oral communication

RS Interior Install Tech III in GAC Fort Worth Unique Skills: Upholstery skills, ability cover flat and curved panels, A/C carpet fabrication - preferred High School Diploma or GED required. 3 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose: The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians. Principle Duties and Responsibilities: Essential Functions: • Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). ., • Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. ., • Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards., • Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks., • Utilize the material tracking system to create parts demand, track squawks and to sign-off work., • Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools., • Prepare and install aircraft interior items in accordance with company operation procedures and quality standards., • Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations., • Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk., • Assist technicians with aircraft maintenance requirements., • Adapt to sudden schedule changes and coordinate projects with other shops/departments as required. Additional Functions: • Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. ., • Make and use simple patterns for own use employing standardized procedures. ., • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: • Ability to read and interpret blueprints and engineering documentation., • Ability to use hand/power tools and equipment associated with installation and removal of interiors., • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift., • Must be computer literate., • Excellent communication skills, both verbal and written., • Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc., • Must be able to read, write, speak, and understand the English language. Requisition Number: 231256 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 03/13/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. ___ | ___ | ___ | ___ Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. ___. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS Interior Install Tech II in GAC Fort Worth Unique Skills: Woodworking, upholstery or finishing skills preferred High School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose: The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Principle Duties and Responsibilities: Essential Functions: • Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. ., • Use the material tracking system to create parts demand, track squawks and to sign-off work., • Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools., • Prepare and install aircraft interior items in accordance with company operation procedures and quality standards., • Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations., • Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk., • Assist technicians, under supervision, with aircraft maintenance requirements., • Adapt to sudden schedule changes. Additional Functions: • Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. ., • Make and use simple patterns for own use employing standardized procedures. ., • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: • Ability to read, write, speak, and understand the English language., • Ability to read and interpret blueprints and engineering documentation., • Ability to use hand/power tools and equipment associated with installation and removal of interiors., • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift., • Must be computer literate., • Excellent communication skills, both verbal and written. Requisition Number: 231103 Category: Operations Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 03/13/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. ___ | ___ | ___ | ___ Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. ___. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aire Serv - JobID: 100-168183822 [Refrigeration Technician / AC Technician] As a Service Professional Technician at Aire Serv, you'll: Be responsible for the installation, maintenance, and repair of refrigeration, heating and air conditioning systems; Insure the efficient use of materials and mainta

Compass Group - - Responsibilities: Performs basic maintenance duties and repairs as assigned. Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance. Maintains logs, performs rounds and c

Compass Group - - Responsibilities: Perform repairs to building and grounds; Replace HVAC air filters per schedule; Notify managers the need for major repairs or additions to building operating systems; Respond to emergency call-in situations; Maintain work area and equipment in a clean and orderly

Pratt Industries - - Responsibilities: Adhere to all safety policies and procedures; Maintain and optimize equipment performance; Troubleshoot and repair equipment, including programmable controllers, A/C and D/C drives; Plan, schedule, and assign maintenance work; Use maintenance software programs

Atria Senior Living - - Responsibilities: Diagnose and repair HVAC, electrical, plumbing, major appliances, and related systems; Complete assigned service requests and repairs safely and timely; Prepare vacant apartments to be rent-ready (turn-key); Maintain customer service standards and respond t

Whataburger - 3313 South Cherry Lane - Responsibilities: Communicates continuously and effectively with Maintenance Services Company (MSC) and restaurant leadership.Installs equipment in accordance with company safety procedures and follows safety protocols.Responsible for restaurant interior and ex

RaceTrac - - Responsibilities: Greet guests and interact with guests to enhance guest experience; Manage store operations on designated shifts; Maintain inventory in a neat and organized manner; Supervise and monitor adherence to safety regulations and store policies; Rings up guests on a cash regi

Company Truck! Employer Paid Benefits! 7.5% match on 401k This Jobot Job is hosted by: Christian Aviles Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $50,000 - $58,000 per year A bit about us: My client provides water management solutions specializing in precise digital measurement, data delivery, and water preservation software. Why join us? Benefits: • 401(k) matching, • Flexible spending account, • Health insurance, • Paid time off Job Details Job Details: Are you looking for an exciting and challenging opportunity in the engineering industry? Our organization is seeking a dedicated and experienced Traveling Field Technician to join our dynamic team. This position offers the opportunity to work in a fast-paced environment where innovation and customer service are at the forefront. The successful candidate will be responsible for installing, maintaining, and troubleshooting water meters and other related equipment. This role requires excellent technical skills, a strong customer service orientation, and the ability to work effectively both independently and as part of a team. Responsibilities: 1. Install, maintain, and repair water meter systems and related equipment in accordance with company standards and procedures., 2. Conduct regular inspections and troubleshooting to identify and resolve issues promptly., 3. Provide exceptional customer service, addressing customer queries and concerns promptly and professionally., 4. Prepare accurate and timely reports detailing work activities and equipment conditions., 5. Collaborate with the engineering team to develop, implement, and improve installation and maintenance procedures., 6. Comply with all safety regulations and maintain a clean and safe work environment., 7. Participate in ongoing training and professional development opportunities to stay updated with industry trends and advancements., 8. Coordinate with other team members to ensure efficient and effective service delivery. Qualifications: 1. A minimum of 3 years of experience as a Field Technician or in a similar role in the engineering industry., 2. Proven experience in installing, maintaining, and troubleshooting water meter systems., 3. Excellent technical skills, with a strong understanding of engineering principles and practices., 4. Outstanding customer service skills, with the ability to communicate effectively with customers and address their needs promptly and professionally., 5. Strong problem-solving skills, with the ability to identify and resolve issues effectively and efficiently., 6. Ability to work effectively both independently and as part of a team., 7. Excellent written and verbal communication skills., 8. Strong attention to detail and the ability to work accurately and efficiently., 9. A valid driver's license and the ability to travel to various job sites as required., 10. Physical stamina and the ability to lift and carry heavy equipment. This is an excellent opportunity for an experienced Field Technician to apply their skills and knowledge in a dynamic and challenging environment. If you have the required experience and skills and are ready to take on this exciting role, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Job Title: Corrosion Service Technician Location: Fort Worth Travel Team Job Summary • Technicians must have the ability to explain and demonstrate the following:, • Ability to apply safety procedures, including PPE, • Demonstrate good Operation of Corrosion Prevention and Control (CPC) Application Equipment to include compressors, application guns, grinders, vacuums, etc., • Apply CPCs on various types of ground combat and support equipment, • Determine the stages of corrosion and categorize them as codes 1-5, • Perform corrosion assessments on equipment, • Assess equipment using PDA, • Perform surface preparation and touch-up procedures, • Complete online DAU CLM module Corrosion Prevention and Control Overview training, • Inspect serviced equipment to validate compliance with CPAC orders and directives., • Ensure daily maintenance and cleanliness of all GFE & CFE equipment., • Understand and meet established productivity and quality control goals associated with assigned functional area / process., • Follow established guidelines in performing day-to-day routine tasks as outlined in Standard Operating Procedures (SOPs), Policy Clarification Letters, Technical Manuals, and Audit Readiness standards, etc., • Understand the Acceptable Performance Levels (APL's) associated with assigned functional work areas / process and work expeditiously to meet contractual and team goals., • Adhere to government, contract, and company policies and procedures., • Ability to use e-mail to receive and disseminate workload tasks and information., • Maintain a safe and secure work environment., • The employee may be required to frequently handle equipment/supplies weighing up to 50 pounds individually and occasionally items weighing more than 50 pounds with assistance, • Must be able to exert moderate physical effort in the loading, unloading, and arranging of equipment/supplies as applicable to the position., • Ability to work inside and/or outside in dirty and dusty environments, and occasionally be exposed to hot, cold, damp, and drafty weather conditions while handling equipment/supplies., • Be able to perform work on hard or uneven surfaces., • Adhere to all PTi quality, safety, and environmental standards Qualifications Experience: • Must demonstrate the ability to read, write, and comprehend written instructions, perform common mathematical tasks, and communicate effectively., • Effectively communicate with coworkers to realize production expected numbers while maintaining a high degree of quality of work., • Must be able to complete company and program policies, procedures, and defined training plan within an established timeline., • US Citizen, • Must possess or be able to obtain and maintain a security clearance applicable to the position and/or military Common Access Card (CAC), SOFA, and LOA within 30 days if required., • Technicians will require CPAC Program certification and annual recertification., • Must be clean-shaven where a respirator can conform to skintight contact around the nose, mouth, and chin., • Must be able to pass a medical pre-screening form to be able to work while wearing a respirator when required., • Must pass online respirator training., • Possess a valid Driver's License Education • High school graduate or equivalent (GED). This job description is meant to be a guide. It is not intended to limit in any way the duties, which a teammate may be required to perform. This job description may be changed at the discretion of the company. PTi maintains a drug-free workplace and performs pre-employment and random substance abuse testing and background verification checks. PTi is an EEO/Affirmative Action employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment to include, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, training, and compensation. Job Posted by ApplicantPro

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security and Surveillance Job Type Full Time Employee Years of Experience 5+ Years Career Level Experienced (Non-Manager) Exemption Exempt Security Systems Project Manager What we’re looking for: We are seeking an experienced electronic security project manager to join our fast growing and dynamic team. What you’ll be doing: This position will have multiple roles ranging from: complete installation project oversight, project financial responsibility, scheduling, system programming, project quality control, installation and subcontractor team coordination, and most importantly, representing NextGen Security as the main point of contact for our valued customers. Some travel may be required. What you bring to the table:  Minimum of 5 years of security project manager experience directly managing all aspects of security projects.  Minimum of 5 years of experience with configuring, installing and maintaining: • Enterprise-level access control systems., • Intrusion detection systems (IDS), both fiber and copper based.  Superior problem solving and communication skills.  Manage technician and subcontractor project teams.  Work independently with minimal supervision.  Familiarization with local electronic security codes and industry standards. Understanding and ability to work safely in a chemical plant environment.  Experience with AutoCAD, Visio, MS Project and other Microsoft products. Preferred  Access Control System Vendor Certifications in Software House, Genetec, ProWatch and/or Lenel.  Video Management System Vendor Certifications in Genetec, OnSSI, MaxPro, and/or Milestone.  Intrusion Detection System Vendor Certifications in Senstar/Optellios, and/or FFT.  Experience in computer operating systems, network design and implementation. TWIC Cardholder. What we bring to the table:  Compensation based upon background and experience.  Commission package based on performance.  Company vehicle.  Full benefits package.  Vacation.  Cellphone Allowance. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description Firetrol Protection Systems, a leading company in fire protection and life safety services, is currently hiring licensed Fire Alarm Lead Technician for our team. Join our team of over 1100 skilled professionals and contribute to ensuring the safety and security of our clients. Looking for a highly experienced technician in programming, networking, voice/evac, etc. You will be responsible for taking the lead on projects and assisting others on the job sites with expertise. You will work with a variety of fire alarm systems, including Notifier, Silent Knight, Firelite, Ademco, Bosch, and more. You may work in various business and institutions, such as commercial, industrial, construction, manufacturing, healthcare, education, and government facilities. We offer competitive wages, outstanding benefits, and opportunities for career growth. Firetrol provides health, dental, and vision insurance, life insurance, short and long-term disability coverage, generous paid time off, a 401(k) plan with a company match and immediate vesting, and sponsorship for training and education. Requirements · Work experience, training, or education in the installation, maintenance, programming, and repair of fire alarm and detection systems · Experience or training with a variety of fire alarm systems (Notifier, Silent Knight, Firelite, Ademco, Bosch, etc.) · May work in a variety of business and institutions including commercial, industrial, construction, manufacturing, healthcare, education, and government facilities · Must possess applicable state licenses in Commercial Fire Alarm and other licenses are welcome. · Additional licenses and certifications are preferred Benefits Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

About Us: HIGHLIGHTS: NEW PRN RATES! SHIFT : Day Shift (7am-7pm) JOB TYPE : PRN FACILITY TYPE : 16 bed Small-Format Hospital (8 ER, 8 Inpatient) We are Emerus, the leader in small-format hospitals. We partner with respected and like-minded health systems who share our mission: To provide the care patients need, in the neighborhoods they live, by teams they trust. Our growing number of amazing partners includes Allegheny Health Network, Ascension, Baptist Health System, Baylor Scott & White Health , ChristianaCare, Dignity Health St. Rose Dominican, The Hospitals of Providence, INTEGRIS Health, MultiCare and WellSpan. Our innovative hospitals are fully accredited and provide highly individualized care. Emerus' commitment to patient care extends far beyond the confines of societal norms. We believe that every individual who walks through our doors deserves compassionate, comprehensive care, regardless of their background, identity, or circumstances. We are committed to fostering a work environment focused on teamwork that celebrates diversity, promotes equity and ensures equal access to information, development and opportunity for all of our Healthcare Pros. Position Overview: The purpose of this position is to perform a variety of imaging procedures, including CT and X-Rays, at a technical level not requiring constant supervision. Essential Job Functions: • Provide technical assistance and supportive patient care to assist the physicians, nurses and other technical and administrative staff in meeting the needs of individual patients throughout the facility., • Operate and maintain all imaging department equipment including but not limited to X-Ray, CT, CR reader, and PACS, • Perform all imaging exams in accordance with established policies, procedures, regulations, and laws and ensure the physician on duty is notified of the results, • Perform basic clinical procedures under the direction of the physician and/or nurse on duty, • Maintain all required documentation, logs, charts, forms and records in paper and electronic formats, • Collect laboratory samples and perform lab testing in accordance with established policies and procedures, as well as COLA and CLIA regulations, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Perform Quality Control as established by this laboratory, • Perform Proficiency Testing and/or Split Sample analysis periodically as established by this facility, • Retain records of all analytic activities performed for a minimum of two years, • Perform all Quality Assessment activities assigned to this position and document these activities for periodic review by the Laboratory Supervisor and/or the Laboratory Director Other Job Functions:, • Perform duties as ER Technician as needed, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Travel to all facility locations as required, • Attend staff meetings or other company sponsored or mandated meetings as required, • Perform additional duties as assigned Basic Qualifications:, • High School diploma or GED, required, • Graduation from an AMA-approved school of Radiology Technology, required, • Associate's degree in Radiology, preferred, • Certified as a medical radiologic technologist as required by the state in which practicing required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in radiography required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in computed tomography, preferred, with the following exceptions, • CT certification required (Las Vegas Market), • CT certification required within 12 months of hire (Pennsylvania market), • Current BLS certification through the American Heart Association, required, • 2+ years radiologic/imaging experience, preferred, • 1+ years of CT experience, preferred, • 1+ years of emergency room experience, preferred, • Proficiency with most X-ray/CT equipment, manufacturer's hardware/software and PACS, • Position requires fluency in English, written and oral communication

About Us: HIGHLIGHTS: NEW PRN RATES! SHIFT : Night Shift (7pm-7am) JOB TYPE : PRN FACILITY TYPE : 16 bed Small-Format Hospital (8 ER, 8 Inpatient) We are Emerus, the leader in small-format hospitals. We partner with respected and like-minded health systems who share our mission: To provide the care patients need, in the neighborhoods they live, by teams they trust. Our growing number of amazing partners includes Allegheny Health Network, Ascension, Baptist Health System, Baylor Scott & White Health , ChristianaCare, Dignity Health St. Rose Dominican, The Hospitals of Providence, INTEGRIS Health, MultiCare and WellSpan. Our innovative hospitals are fully accredited and provide highly individualized care. Emerus' commitment to patient care extends far beyond the confines of societal norms. We believe that every individual who walks through our doors deserves compassionate, comprehensive care, regardless of their background, identity, or circumstances. We are committed to fostering a work environment focused on teamwork that celebrates diversity, promotes equity and ensures equal access to information, development and opportunity for all of our Healthcare Pros. Position Overview: The purpose of this position is to perform a variety of imaging procedures, including CT and X-Rays, at a technical level not requiring constant supervision. Essential Job Functions: • Provide technical assistance and supportive patient care to assist the physicians, nurses and other technical and administrative staff in meeting the needs of individual patients throughout the facility., • Operate and maintain all imaging department equipment including but not limited to X-Ray, CT, CR reader, and PACS, • Perform all imaging exams in accordance with established policies, procedures, regulations, and laws and ensure the physician on duty is notified of the results, • Perform basic clinical procedures under the direction of the physician and/or nurse on duty, • Maintain all required documentation, logs, charts, forms and records in paper and electronic formats, • Collect laboratory samples and perform lab testing in accordance with established policies and procedures, as well as COLA and CLIA regulations, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Perform Quality Control as established by this laboratory, • Perform Proficiency Testing and/or Split Sample analysis periodically as established by this facility, • Retain records of all analytic activities performed for a minimum of two years, • Perform all Quality Assessment activities assigned to this position and document these activities for periodic review by the Laboratory Supervisor and/or the Laboratory Director Other Job Functions:, • Perform duties as ER Technician as needed, • Maintain an adequate supply of all reagents and consumables to perform quality testing, • Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment, • Travel to all facility locations as required, • Attend staff meetings or other company sponsored or mandated meetings as required, • Perform additional duties as assigned Basic Qualifications:, • High School diploma or GED, required, • Graduation from an AMA-approved school of Radiology Technology, required, • Associate's Degree in Radiology, preferred, • Certified as a medical radiologic technologist as required by the state in which practicing, required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in radiography required, • Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in computed tomography, preferred, • CT certification required within 12 months of hire (Pennsylvania market), • Current BLS certification through the American Heart Association, required, • 2+ years radiologic/imaging experience, preferred, • 1+ years of CT experience, preferred, • 1+ years of emergency room experience, preferred, • Proficiency with most X-ray/CT equipment, manufacturer's hardware/software and PACS, • Position requires fluency in English; written and oral communication

About Us: HIGHLIGHTS: NEW PRN RATES! SHIFT : Day Shift (7am-7pm) JOB TYPE : PRN FACILITY TYPE : 16 bed Small-Format Hospital (8 ER, 8 Inpatient) We are Emerus, the leader in small-format hospitals. We partner with respected and like-minded health systems who share our mission: To provide the care patients need, in the neighborhoods they live, by teams they trust. Our growing number of amazing partners includes Allegheny Health Network, Ascension, Baptist Health System, Baylor Scott & White Health , ChristianaCare, Dignity Health St. Rose Dominican, The Hospitals of Providence, INTEGRIS Health, MultiCare and WellSpan. Our innovative hospitals are fully accredited and provide highly individualized care. Emerus' commitment to patient care extends far beyond the confines of societal norms. We believe that every individual who walks through our doors deserves compassionate, comprehensive care, regardless of their background, identity, or circumstances. We are committed to fostering a work environment focused on teamwork that celebrates diversity, promotes equity and ensures equal access to information, development and opportunity for all of our Healthcare Pros. Position Overview: The purpose of this position is to perform a variety of imaging procedures, including CT and X-Rays, at a technical level not requiring constant supervision. Essential Job Functions: - Provide technical assistance and supportive patient care to assist the physicians, nurses and other technical and administrative staff in meeting the needs of individual patients throughout the facility. - Operate and maintain all imaging department equipment including but not limited to X-Ray, CT, CR reader, and PACS - Perform all imaging exams in accordance with established policies, procedures, regulations, and laws and ensure the physician on duty is notified of the results - Perform basic clinical procedures under the direction of the physician and/or nurse on duty - Maintain all required documentation, logs, charts, forms and records in paper and electronic formats - Collect laboratory samples and perform lab testing in accordance with established policies and procedures, as well as COLA and CLIA regulations - Maintain an adequate supply of all reagents and consumables to perform quality testing - Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment - Perform Quality Control as established by this laboratory - Perform Proficiency Testing and/or Split Sample analysis periodically as established by this facility - Retain records of all analytic activities performed for a minimum of two years - Perform all Quality Assessment activities assigned to this position and document these activities for periodic review by the Laboratory Supervisor and/or the Laboratory Director Other Job Functions: - Perform duties as ER Technician as needed - Maintain an adequate supply of all reagents and consumables to perform quality testing - Perform all routine daily, weekly, monthly, and periodic maintenance and function checks following established protocol for all imaging equipment - Travel to all facility locations as required - Attend staff meetings or other company sponsored or mandated meetings as required - Perform additional duties as assigned Basic Qualifications: - High School diploma or GED, required - Graduation from an AMA-approved school of Radiology Technology, required - Associate’s Degree in Radiology, preferred - Certified as a medical radiologic technologist as required by the state in which practicing, required - Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in radiography required - Registered Technologist with the American Registry of Radiologic Technologists (ARRT) in computed tomography, preferred - CT certification required within 12 months of hire (Pennsylvania market) - Current BLS certification through the American Heart Association, required - 2+ years radiologic/imaging experience, preferred - 1+ years of CT experience, preferred - 1+ years of emergency room experience, preferred - Proficiency with most X-ray/CT equipment, manufacturer’s hardware/software and PACS - Position requires fluency in English; written and oral communication

As an Aircraft Maintenance Technician, you'll be the go-to expert turning complex engine challenges into safe, quick-turn solutionsdiagnosing issues, performing line maintenance, and executing shop repairs that keep aircraft engines ready to fly. Aircraft Maintenance Technician. Perform maintenance

Maintain accurate records of maintenance activities using Computerized Maintenance Management Systems. We are seeking a skilled and dedicated Maintenance Technicians. The ideal candidate's will possess a strong background in facilities maintenance and demonstrate proficiency in various technical ski

Carry out maintenance policies and procedures. Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions. Perform skilled repair and maintenance operations.

At CWS, the Maintenance Technician's primary responsibility is to enhance the integrity of the community, while maintaining exceptional customer service. Perform common area maintenance. Participate in preventative maintenance program.

The Senior Maintenance Technician performs daily maintenance tasks as directed by the Maintenance Supervisor and Community Manager. The Senior Maintenance Technician ensures the safety and cleanliness of the property, maintains amenities, and responds to maintenance requests promptly and professiona

The Maintenance Technician will work hand-in-hand with the Maintenance Supervisor to provide skilled, efficient and professional service. The Maintenance Technician is responsible for the overall maintenance of the property, including but not limited to:. Perform independently technical maintenance

Maintenance Technician to join our growing team. They will follow preventative maintenance schedules along with existing equipment protocol including building maintenance. Minimum of three years of experience in troubleshooting, repair, and maintenance of processing/packaging equipment, as well as b

Active member of a Roman Catholic parish faith community.

Industrial Maintenance Technician.

Shearer's Foods, founded in 1974 and headquartered in Massillon, OH, is a leading manufacturer of salty snacks, cookies, and crackers. With a strong focus on innovation, service, quality, and sustainability, Shearer's has been awarded the food industry's highest award for environmental sustainabilit

Follow safety guidelines and company maintenance procedures. Ability to handle multiple maintenance tasks efficiently. Basic knowledge of facility maintenance and repair practices.

The Preventative Maintenance Field Service Technician (Lube Technician) performs onsite preventive maintenance including lighter duty maintenance and repair services on a variety of rental equipment to ensure that the equipment continues to run according to manufacturer's specifications and is in op

As a High Purity Water System Maintenance Technicianyou will be responsible for repairs, adjustments, and ongoing maintenance of facilities. Performs preventive maintenance and repairs to critical utilities equipment (HVAC, water systems, compounding vessels, and manufacturing equipment) on company

The Maintenance Technician routinely performs preventative maintenance on all equipment and components to ensure the continued safe, efficient, and effective operations of equipment used in the facility. Two years of experience as a Maintenance Technician preferred. Completes routine repairs, preven