Trabajos medical assembly en San Diego, CaliforniaCrear alertas

Job Description Electronic Assemblers (Microscope & Soldering Experience Required) El Cajon, CA Multiple Immediate Openings Do you have hands-on electronic assembly experience? Can you solder small components under a microscope? If not, this role is NOT the right fit. We are currently hiring multiple skilled Electronic Assemblers for a precision manufacturing environment specializing in RF and microwave components. These roles require experience with small electronic parts, microscope work, soldering, and intricate bench assembly in a fast-paced production setting. This is NOT a general assembly or warehouse role. Candidates must have direct experience in electronics manufacturing. What You’ll Be Doing: • Assemble small electronic and RF components with precision, • Work under a 10X microscope for assembly and inspection, • Perform hand soldering, solder rework, and hot plate reflow, • Complete coil winding, shield cutting, and strap cutting, • Apply epoxy staking and potting, • Assist with electronics tuning, leak testing, and product validation, • Follow detailed work instructions, schematics, and assembly procedures, • Maintain strict quality standards and a clean work area Required Experience: ✔ Minimum 2+ years of electronic assembly experience ✔ Experience with small parts / micro-assembly ✔ Ability to solder through-hole and SMT components ✔ Experience working under a microscope (required) ✔ Strong hand dexterity and attention to detail ✔ Ability to read and follow assembly instructions, schematics, or blueprints ✔ Reliable attendance and strong teamwork skills Preferred: ⭐ IPC-A-610 or J-STD certification ⭐ RF, aerospace, defense, or medical device assembly experience ⭐ Experience with coil winding or epoxy potting Requirements: • Must be a U.S. Citizen or Permanent Resident You should be proficient in: • Soldering, • PCB Assembly (Printed Circuit Board Assembly), • PCB Components (Printed Circuit Board Components), • Microscope Proficiency, • Electrical / Electronic Systems

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. The Assembly Technician is responsible for the precise assembly, wiring, and integration of electronic components and metallic cabinets used in Econolite’s Intelligent Transportation Systems (ITS) products. This role involves tasks such as cable routing, wire harnessing, hardware installation, and functional testing, with a focus on quality, safety, and adherence to documented procedures. The ideal candidate enjoys hands-on work, is mechanically inclined, and has a strong attention to detail—especially when working with electrical parts. DUTIES • Build electrical parts like wire harnesses and route cables inside cabinets., • Assemble metal cabinets by following instructions and quality standards., • Perform various hands-on tasks on the assembly line, from simple to more detailed work, with care and accuracy., • Follow all safety rules, work procedures, and company policies to keep the workplace safe and organized., • Check parts for problems and report any issues right away to help improve product quality., • Help with packing and labeling products when needed., • Support other teams or departments when extra help is needed., • Take care of your tools and keep them stored properly., • Keep your work area clean, organized, and free of safety hazards., • You may be trained to do other tasks or special jobs that require extra attention to detail. QUALIFICATIONS • A minimum of 2 years of experience in electronic and mechanical product assembly and testing preferred., • Technical training and certification preferred., • Dexterity with hand tools, hand soldering equipment, and other typical electronic assembly tools., • Proficiency in following documented work instructions and attention to detail., • Ability to work in a team environment and communicate well with peers and supervisors. PHYSICAL REQUIREMENTS • Must be able to stand, walk, squat, and bend at the waist for extended periods of time, • Ability to handle small components and use hand tools effectively for extended periods of time., • Performing repetitive tasks such as screwing, soldering, or wiring., • Ability to lift up to 35 pounds, • Safety sensitive position—will be required to work with electrical components.PRE-EMPLOYMENT All candidates who accept employment will be subject to a background investigation and drug screening. COMPENSATION The base pay range for this full-time non-exempt position is $18.00 - $20.00 per hour plus benefits. Pay ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire base pay rates for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Other voluntary benefits include: identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran’s status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description Rock West Composites, Inc. has an exciting opportunity for a Composite Tech. Rock West Composites, Inc. is an engineering and manufacturing company dedicated to providing innovative solutions for commercial and government customers. We currently have positions available for both 1st shift (6:00a-3:30p) and second shift (3p-12:30a). Position Summary: Performs a variety of manufacturing operations essential to completing sub-assemblies and final assemblies for composites and sheet metal aircraft components while maintaining all engineering requirements and quality standards. Essential Functions: • Read, interpret, and follow blueprints and Manufacturing Plans to assemble composite and sheet metal components., • Bond various materials such as composites, metals, and laminates, for assemblies, parts, components, and structures., • Align components and sub-assemblies on jigs and fixtures., • Layout, drill, form, and trim aircraft component parts and sub-assemblies., • Perform part-fitting operations including filing, sawing, burring, trimming, drilling, reaming, and riveting., • Mix and apply 2-part adhesive for sealing and edge bonding., • Familiar with manufacturing execution systems for electronic buy off and status of work Non-Essential Functions: • Other duties as assigned. Required Education and Experience: • Ability to read and interpret aircraft blueprints., • Experience working with mylar overlays., • Minimum 6 years of experience in composites, sheet metal assembly, and/or Autobody repair., • Experience/ expertise using drill motors, rivet guns, die grinders, cleco pliers, countersink cages, and standard hand tools and measurement equipment including calipers and micrometers., • Knowledge of aircraft hardware, materials, and processes, • Strong math skills and mechanical aptitude, • Bi-Lingual Spanish preferred, • Education: High School Diploma, • US. Person under 22 CFR 120 (due to ITAR Restrictions) Perks and Benefits: • 100% Employer Paid Medical and Dental, • 401K - 5% match, • Employee Stocks Option Program, • 8- paid Holidays, • PTO: Max. 4-weeks after 5 years of employment, • $2,500 tuition reimbursement Compensation: The hourly range for this position falls within $26 and $32. The final compensation will be determined based on experience, skillset, and other factors permitted by law. Why should you want to work with us? At Rock West Composites, we care about our employees! We offer exceptional benefits to our full-time team members, including 100% employer-paid Medical & Dental, Vision, Paid Time Off, and a 401K match. Plus, you'll thrive in our fun and friendly working environment! Rock West Composites is an Equal Opportunity Employer. It is the policy of the company to provide equal opportunity for all employees and applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. Certain positions require meeting the U.S. Person definition in 22 CFR 120.62. ITAR Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder) as defined by 8 U.S.C. 1101(a)(20), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, Must be authorized to work in the U.S. without the company’s immigration sponsorship now or in the future. Rock West Composites will not offer immigration sponsorship for this position. Rock West Composites will not seek an export authorization for this role. Rock West Composites maintains a Drug and Alcohol-Free Workplace. Depending on state law and the nature of the position, candidates who receive a conditional offer of employment may be required to complete a drug screening. Rock West Composites may also conduct drug and alcohol testing based on reasonable suspicion, post-incident, or for safety-sensitive positions as permitted by law. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact 858-537-6260.

Job Description Are you looking for an opportunity to make a difference? At Mesa Labs we’re passionate about protecting the vulnerable by enabling scientific breakthroughs, ensuring product integrity, increasing patient and worker safety, and improving quality of life around the world. At Mesa Labs we offer competitive wages, including bonus opportunity, and a comprehensive benefits package. Base Compensation Range: $24.1587 to $30.1683 USD This position is eligible for an annual 10% bonus opportunity in addition to the base salary Outstanding Benefits and Perks: We are proud to offer a variety of benefits that meet the diverse needs of our employees: • Eligible for benefits the first day of the month after you start, • Tiered Medical, Dental and Vision Insurance options, • Health savings (HSA), healthcare & dependent care flexible spending (FSA) accounts, • Company paid short term and long-term disability (unless covered by a state disability plan), • Company paid life insurance and AD&D, • 3 weeks of accrued vacation time; accruals begin on Day 1, • Paid sick leave of 48 hours per calendar year, • Eligible employees may receive four (4) weeks paid Care Giver leave after 1 year of service or in accordance with state leave laws, • 401(k) plan that provides a 4% Safe Harbor company match on a 4% employee contribution that begins on Day 1, • Employee Wellness and Financial Assistance Resources through Cigna and NY Life, • Nine (9) paid company holidays per year, • Overtime opportunities Agena: Agena Bioscience® empowers research laboratories worldwide to deliver scalable targeted genomic data. Our open, advanced platform, the Mass ARRAY® System, provides researchers with insights through a highly multiplexed solution in the areas of mutation profiling, liquid biopsy, pharmacogenetics, and more. Job Summary: The Production Process Operator IV is responsible for operating and monitoring complex production processes, ensuring efficient and safe manufacturing operations. This position requires an experienced operator who has advanced technical knowledge, leadership capabilities, and expertise in optimizing production processes, troubleshooting issues, and maintaining high product quality standards. Duties/Responsibilities: Process Operation & Monitoring: • Operate and monitor sophisticated production equipment and machinery to ensure safe and efficient production., • Set up, calibrate, and adjust machines as necessary, following standard operating procedures (SOPs) and work instructions., • Monitor critical process parameters such as temperature, pressure, flow rates, and material levels, adjusting settings as needed to maintain product quality., • Ensure all production processes are running within specified limits to meet production targets. Troubleshooting & Problem Solving: • Identify process abnormalities or equipment malfunctions and troubleshoot to resolve issues quickly, minimizing downtime., • Work with maintenance personnel and other technical staff to perform root cause analysis and implement corrective actions to improve process reliability., • Continuously improve equipment and process performance to maximize efficiency. Quality Assurance & Compliance: • Ensure product quality standards are met by conducting routine inspections and quality checks during production., • Document results of quality tests, including any deviations, and take corrective actions when necessary., • Ensure compliance with all regulatory requirements, safety standards, and quality assurance protocols (e.g., FDA, GMP, ISO)., • Maintain accurate records of production activities, including batch records, logs, and other documentation. Safety & Environmental Compliance: • Maintain a safe work environment by adhering to all safety protocols and actively promoting safety awareness among team members., • Follow proper handling, storage, and disposal procedures for hazardous materials and waste, adhering to environmental regulations., • Participate in safety training, hazard assessments, and emergency drills as needed. Process Optimization & Continuous Improvement: • Participate in continuous improvement projects to increase production efficiency, reduce waste, and lower costs., • Utilize Lean Manufacturing, Six Sigma, or other process improvement methodologies to identify areas for process optimization., • Propose and implement changes to improve production throughput and reduce variability. Team Collaboration & Training: • Serve as a mentor and leader to junior operators, providing guidance and training on process operations, troubleshooting techniques, and safety procedures., • Collaborate with production teams, quality control, maintenance, and engineering to ensure smooth production flow., • Assist in the development and training of new SOPs, work instructions, and best practices for operational excellence. Data Entry & Reporting: • Accurately record production data, machine settings, maintenance activities, and quality checks., • Generate and submit reports related to production performance, downtime, material usage, and any process-related incidents. Equipment Maintenance: • Perform basic maintenance tasks on equipment and machinery, such as cleaning, lubrication, and minor adjustments., • Notify maintenance personnel of any equipment malfunctions or maintenance needs that require professional attention. Experience/Education: • High school diploma or equivalent required. A bachelor's degree in a STEM related discipline is preferred but not required., • Minimum of 4 - 6 years of experience in a manufacturing or production environment. Knowledge & Skillsets Required: • Strong understanding of manufacturing processes, equipment, and production methods., • Proficient in reading and interpreting technical documentation such as blueprints, schematics, and process diagrams., • Ability to troubleshoot mechanical, electrical, and process issues effectively., • Strong attention to detail and ability to work with precision., • Excellent communication skills, both written and verbal, to coordinate with other team members, supervisors, and departments., • Ability to work under pressure and manage multiple tasks to meet production deadlines., • Strong commitment to safety, quality, and regulatory compliance. Physical Demands (US Only): • Standing or walking: Frequently during production processes and equipment operation., • Lifting: Handling and moving materials or products, sometimes heavy., • Manual dexterity: Using tools and operating machinery with precision., • Bending and crouching: Accessing machinery or performing tasks in confined spaces., • Repetitive motions: Repeatedly performing assembly or production tasks. Environmental Conditions (US Only): • Workspace: Climate control (air conditioning or heating) to ensure comfort., • Lighting: Artificial lighting, • Noise Levels: Light to moderate Ergonomics: • Ventilation: Good ventilation to ensure a comfortable working environment, though this can vary depending on the building. Mesa Labs is an Equal Employment Opportunity Employer. Mesa Labs prohibits unlawful discrimination and harassment against applicants or employees based on age, race, sex, color, religion, creed, national origin or ancestry, disability, military status, sexual orientation, or any other status protected by applicable state or local law.

Job Description URGENT HIRING!!!! ELECTRO-MECHANICAL ASSEMBLER 2nd Shift Available Job Summary: Seeking an Electro-Mechanical Assembler to perform assembly and subassembly of electronic and mechanical components, including cable harnesses, connectors, modules, and chassis assemblies. The role requires following drawings, wiring diagrams, and work instructions to produce high-quality products in a manufacturing environment. Key Responsibilities: • Assemble electro-mechanical components and subassemblies., • Read and follow assembly drawings, wiring diagrams, and work instructions., • Use hand tools, soldering equipment, volt meters, and basic test instruments., • Perform soldering, inspection, testing, troubleshooting, and rework as needed., • Ensure products meet quality and safety standards., • Maintain accurate production records and documentation., • Follow established manufacturing processes and safety procedures.Required Skills:, • Experience in electro-mechanical or electronics assembly., • Ability to read technical drawings and assembly instructions., • Proficiency with hand tools and soldering equipment., • Strong attention to detail and manual dexterity., • Experience with inspection, testing, and quality checks., • Ability to work independently and as part of a team.Work Environment:, • Manufacturing facility in San Diego, CA., • 2nd shift position with overtime and occasional Saturday work., • Hands-on work involving assembly, soldering, testing, and inspection in a structured production environment Job Type & Location This is a Contract to Hire position based out of SAN DIEGO, CA. Pay and Benefits The pay range for this position is $22.00 - $23.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in SAN DIEGO,CA. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Summary: Seeking an Electro-Mechanical Assembler to perform assembly and subassembly of electronic and mechanical components, including cable harnesses, connectors, modules, and chassis assemblies. The role requires following drawings, wiring diagrams, and work instructions to produce high-quality products in a manufacturing environment. Key Responsibilities: • Assemble electro-mechanical components and subassemblies., • Read and follow assembly drawings, wiring diagrams, and work instructions., • Use hand tools, soldering equipment, volt meters, and basic test instruments., • Perform soldering, inspection, testing, troubleshooting, and rework as needed., • Ensure products meet quality and safety standards., • Maintain accurate production records and documentation., • Follow established manufacturing processes and safety procedures.Required Skills:, • Experience in electro-mechanical or electronics assembly., • Ability to read technical drawings and assembly instructions., • Proficiency with hand tools and soldering equipment., • Strong attention to detail and manual dexterity., • Experience with inspection, testing, and quality checks., • Ability to work independently and as part of a team.Work Environment:, • Manufacturing facility in San Diego, CA., • 2nd shift position with overtime and occasional Saturday work., • Hands-on work involving assembly, soldering, testing, and inspection in a structured production environment Job Type & Location This is a Contract to Hire position based out of SAN DIEGO, CA. Pay and Benefits The pay range for this position is $22.00 - $23.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in SAN DIEGO,CA. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Mechanical Assembly Technician - $29/HR - 10am Start Time Job Description This role combines mechanical assembly, wire and cable harnessing, and hands-on quality inspection and testing of electro-mechanical subassemblies. You will follow detailed electronic work instructions within a manufacturing execution system, assemble mechanical and electrical components using hand and power tools, install firmware on printed circuit board assemblies (PCBAs), and perform functional testing and troubleshooting. The position requires strong computer proficiency, strict adherence to build plans, and the ability to document every step of the manufacturing process accurately. Responsibilities • Assemble electro-mechanical subassemblies by following detailed electronic work instructions within the manufacturing execution system (MES)., • Open and navigate work instructions for each assigned subassembly, complete tasks step by step, and record completion in the MES., • Perform electrical assembly by connecting wires, harnesses, and cables to modules and PCBAs using hand and small power tools., • Use tools such as screwdrivers, wrenches, torque wrenches, power drills, needle nose pliers, wire strippers, and crimpers to complete assemblies safely and accurately., • Install firmware onto PCBAs by opening the appropriate program on a laptop, running scripts, and verifying successful uploads., • Conduct functional testing by selecting the correct test area, entering and running test codes, and monitoring results to ensure proper device performance., • Attach cables to subassemblies, load programs, and run test scripts as part of the testing process., • Document every step of the manufacturing process in the MES to create a complete electronic device history record., • Verify specific areas of the build by generating verification numbers, entering them into the system, and interpreting pass/fail results provided by the software., • Troubleshoot failures by identifying errors, determining root causes, and making necessary corrections to assemblies or processes., • Use the 42Q manufacturing execution system daily to track work, enter data, and maintain accurate production records., • Participate in daily 7:00 AM stand-up meetings to receive work assignments, review build plans, and align with team goals., • Work closely with senior technicians during training, shadowing and collaborating to complete assigned builds and tests., • Follow all build plans and work instructions without deviation, ensuring consistent quality and compliance., • Communicate clearly with team members and leaders when troubleshooting issues or clarifying instructions., • Adhere to ESD and safety protocols, including wearing lab coats and safety glasses, and maintaining a clean and organized work area., • Contribute to a collaborative team environment by supporting colleagues and working together in a tight, hands-on lab setting., • Transition to a new area after approximately three months, applying learned skills to additional subassemblies and processes. Essential Skills • Proven experience in electro-mechanical subassembly, including both mechanical and electrical components., • Hands-on experience with mechanical assembly using hand and small power tools., • Strong computer proficiency, including frequent use of laptops, software applications, and web-based systems., • Ability to use a manufacturing execution system (MES), specifically 42Q, to open work instructions and track all tasks., • Proficiency with tools such as screwdrivers, wire strippers, crimpers, wrenches, torque wrenches, needle nose pliers, and small power tools., • Experience with wiring, wire harness assembly, and crimping for electronic and electro-mechanical devices., • Demonstrated experience in testing and troubleshooting electronic or electro-mechanical products in previous roles., • Familiarity with electronics and basic test equipment, including oscilloscopes., • Ability to install firmware on PCBAs and run scripts to upload and verify firmware., • Capability to perform functional testing by entering and running test codes and interpreting results., • Strong attention to detail and the ability to follow electronic work instructions without deviation., • Comfort using Outlook and Microsoft Teams daily for communication and coordination., • Ability to document work accurately and completely in an electronic system, creating a reliable device history record., • Effective communication skills to describe troubleshooting processes and collaborate with team leads and peers., • Team-oriented mindset and ability to work closely with others in a collaborative environment. Additional Skills & Qualifications • Previous experience working in an ESD-controlled lab or manufacturing environment., • Exposure to repair work on electronic or electro-mechanical devices., • Experience using oscilloscopes and other diagnostic tools for troubleshooting., • Comfort working in a start-up environment with evolving processes and opportunities for growth., • Ability to clearly explain past troubleshooting steps, including how issues were identified, escalated, and resolved., • Strong interpersonal skills to build effective working relationships with technicians, supervisors, and peers. Why Work Here? You will join a dynamic start-up environment with a small, collaborative team and significant opportunities for growth and development. You will work closely with experienced technicians and supervisors, gaining hands-on exposure and mentorship that supports your technical and professional advancement. The organization offers competitive pay rates and a modern campus environment featuring an on-site gym, basketball court, discounted lunches at the food court, and employee resource group (ERG) programs that foster community and inclusion. The culture emphasizes teamwork, continuous learning, and shared success, giving you the chance to grow your skills while contributing meaningfully to innovative products. Work Environment You will work in an ESD-controlled lab environment where protecting sensitive electronic components is a top priority. Lab coats and safety glasses are required, and you will operate in a tight, collaborative workspace where team members work closely together to meet build plans and goals. The role relies heavily on computers and software systems; you will use a laptop throughout the day, including the 42Q manufacturing execution system, as well as Outlook and Microsoft Teams for communication. The standard work schedule is Monday to Friday, 10:00 AM to 6:30 PM, with an initial two-month training period that may follow a different schedule. Each day begins with a 7:00 AM stand-up meeting where work is assigned and priorities are set. During training, you will be partnered with a technician, shadowing and receiving coaching and guidance as you learn the processes. After approximately three months, you will transition to another area, broadening your experience across different subassemblies. The environment values strict adherence to build plans, consistent documentation, and strong teamwork in a hands-on, production-focused setting. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $25.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Join our team and help build the future DNA medicine. INOVIO is a biotechnology company focused on developing and commercializing DNA medicines to help treat and protect people from HPV-related diseases, cancer, and infectious diseases. INOVIO’s technology optimizes the design and delivery of innovative DNA medicines that teach the body to manufacture its own disease-fighting tools. For more information, visit www.inovio.com. Job summary The Assembler II uses a variety of hand and power tools, fixtures, work instructions and test equipment to perform a series of operations to correctly assemble and/or test medical devices. Essential job functions and duties • Follow detailed assembly instructions, processes and procedures to build disposable and electronic products both in and out of a cleanroom environment., • Provide hands on job function training to coworkers as needed., • Maintain a clean and organized work area to facilitate manufacturing functions., • Perform assembly of electronic components and sub-assemblies., • Complete cable routing and securing of wire harnesses and components., • Perform repairs to sub-assemblies and devices., • Generate accurate production records., • Notify supervisor of any production abnormality or unsafe condition/ practice., • Comply with policies, guidelines and regulatory requirements per the Quality System., • Perform other duties as requested. Minimum requirements • High school degree or equivalent; Technical/Vocational school, and completion of Level I or equivalent experience in a similar position., • Minimum 2 years in a commercially regulated medical manufacturing environment. Technical training may be applied in lieu of experience., • Experience working within a class 8 or higher cleanroom environment., • Basic soldering & de-soldering skills strongly desired., • Working knowledge of industry color and numeric codes., • Ability to read schematics, drawings, and assembly instructions., • Knowledge of ESD practices., • Ability to use test instruments, jigs, and various hand tools., • Ability to read and comprehend procedures written in English., • Displayed comprehension of assembly practices and technologies., • Familiarity with assembly tools, processes, and terminology., • Technical knowledge of electronics and mechanical designs., • Understanding of the application and functioning of test equipment., • Good verbal and written communication skills., • Ability to work with a minimum of direct supervision., • Understanding or experience with regulatory requirements (OSHA, FDA, ISO) and general safety., • Self-motivated team player., • Good written and oral communication skills., • Medical device manufacturing experience., • Familiarity with personal computers., • Technical writing skills desired., • Lifting to 30 pounds. Disclaimer INOVIO Pharmaceuticals, Inc. is an Equal Employment Opportunity Employer, including but not limited to veterans and individuals with disabilities. We prohibit discrimination of any kind. In keeping with our policy, we recruit, hire, train, and promote the most qualified individuals for all job titles, and we provide equal opportunities to all employees and applicants for employment. A current US work authorization is required. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. INOVIO offers an attractive benefits package and is an equal opportunity employer. Important notice to employment businesses/agencies INOVIO does not accept referrals from employment agencies unless written authorization from the INOVIO Human Resources department has been provided. In the absence of written authorization, any actions undertaken by employment agencies shall be deemed to have been performed without our consent and therefore INOVIO will not be liable for any fees arising from employment agency referrals in respect to current or future position vacancies at INOVIO.

Job Description Soldering Technician 1st shift - $22 - $26/hr+ - Convoy, San Diego Job Description This role focuses on soldering and assembling cable and wire harness assemblies, box builds, kitting, and related products from start to finish. You will work with a variety of cable components and connectors, using both automated and manual soldering methods, and ensure that all assemblies meet industry standards and quality requirements. Responsibilities • Solder and assemble cable and wire harness assemblies, box builds, kitting, and other related products from start to finish., • Perform cable and connector soldering using automated methods, including wire-to-wire soldering for connectors and cable components, and small amounts of reflow with lead-free or lead-based solder paste and alloys., • Read work orders, follow production documentation and sample assemblies, and apply verbal instructions to complete assigned tasks accurately., • Carry out labeling, wire cutting, stuffing, crimping, bagging and tagging, soldering, potting, IDC, SCSI, heat shrinking, and related assembly tasks., • Measure materials in inches (in decimal form) and ensure precise cutting, stripping, and preparation of wires and cables., • Perform backshelling, harnessing, harness board construction, and box builds according to specifications., • Assemble kits and create wire lists to support production and assembly processes., • Execute pin extraction, splicing cables, and preparing solder cups as required., • Apply heat shrink, epoxy, and other materials to protect and finish cable and harness assemblies., • Use microscopes, long nose pliers, side cutters, and soldering irons to perform detailed and precise soldering and assembly work., • Follow IPC 610/620 and J-STD-001 standards to ensure high-quality workmanship and compliance with industry requirements., • Assist in the Quality Management System (QMS) and support the organizations commitment to continuous improvement., • Maintain a clean and organized individual workstation and adhere to all workplace policies, including no phone usage on the production floor. Essential Skills • Hands-on soldering experience, including wire-to-wire and connector soldering, through-hole soldering, and solder cup work., • Proficiency in assembly tasks such as wire cutting, crimping, stuffing, lacing, stripping wire, heat shrinking, labeling, and splicing cables., • Knowledge of IPC 610 and IPC 620 standards., • J-STD-001 certification (current or expired)., • Ability to use microscopes for detailed inspection and precision work., • Ability to use long nose pliers, side cutters, and soldering irons safely and effectively., • Experience with harnessing, harness board construction, backshelling, and box builds., • Ability to read and follow work orders, production documentation, and verbal instructions., • Ability to measure in inches in decimal form and apply measurements accurately to cutting and assembly tasks., • Familiarity with tasks such as potting, IDC, SCSI, epoxy application, and kitting. Additional Skills & Qualifications • Experience working with both lead-free and lead-based solder paste and alloys., • Exposure to automated soldering methods and small reflow processes., • Experience creating wire lists and performing pin extraction., • Comfort working autonomously at individual workstations., • Previous experience contributing to or working within a Quality Management System (QMS) and continuous improvement environment. Why Work Here? The organization offers a comprehensive benefits package and a culture that rewards commitment and performance. Once you become a full employee, you can access medical insurance, life insurance, an employee stock ownership program (ESOP), a 401(k) plan, and bonus opportunities, including a Christmas bonus that extends even to contractors. You will join a stable environment that values long-term growth, shared success, and financial well-being. Work Environment This position operates on a first-shift schedule, typically from 7:00 a.m. to 3:30 p.m., with substantial overtime available, including early start times around 5:00 a.m. and Saturday work, making 50+ hour weeks common. Work takes place in an assembly setting with individual workstations in a quiet workplace. All employees work autonomously and are expected to focus on their tasks without distractions. There is a strict no-phone policy on the production floor. You will work with tools and equipment such as microscopes, long nose pliers, side cutters, soldering irons, and other standard assembly tools in a structured and quality-focused environment. Job Type & Location This is a Contract to Hire position based out of San Diego, CA 92111. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA 92111. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionNow Hiring: Cleanroom Technicians / Medical Device Assemblers Join a growing medical device manufacturing team where precision, quality, and innovation come together. We are seeking detail-oriented Cleanroom Technicians and Medical Assemblers to support the production of life-changing medical devices in a highly regulated cleanroom environment. Position Overview As a Cleanroom Technician, you will perform precision assembly, inspection, and manufacturing of medical device components while following strict quality standards and cleanroom procedures. This role requires strong attention to detail, experience with measuring tools, and the ability to work with small, intricate parts under microscopes and specialized equipment. Key Responsibilities • Assemble medical device components by following detailed work instructions, engineering drawings, and manufacturing procedures., • Perform precision assembly and processing of parts throughout various stages of production., • Conduct visual and microscope inspections to identify defects and ensure product quality., • Use calipers, micrometers, and other measuring tools to verify dimensions and tolerances., • Complete production documentation, travelers, labels, and quality records accurately., • Maintain compliance with cleanroom standards and contamination control procedures., • Operate manufacturing equipment safely while adhering to established SOPs., • Support quality assurance initiatives and report non-conforming materials or processes., • Assist with both production manufacturing and research & development projects as needed.Required Qualifications, • Minimum 2 years of manufacturing experience., • Previous medical device manufacturing experience required., • Experience working in a cleanroom environment preferred., • Proficient with calipers, micrometers, and precision measuring equipment., • Comfortable working with microscopes and small components., • Strong documentation and data entry skills., • Excellent attention to detail and ability to follow detailed instructions., • Able to lift up to 20 lbs and perform seated, repetitive work for extended periods.Preferred Qualifications, • Medical device assembly and inspection experience., • Knowledge of cleanroom protocols and contamination control., • Experience with micro-precision manufacturing processes., • Strong organizational and problem-solving skills., • Ability to work independently while maintaining quality standards.Why Join Us?, • Opportunity to work on cutting-edge medical devices., • Gain exposure to both production manufacturing and R&D projects., • Stable company with long-term growth opportunities., • Collaborative and supportive team environment., • Advanced training in precision manufacturing and cleanroom operations.Work Environment This position is based in a controlled medical device cleanroom where employees work with microscopes, precision measurement equipment, and specialized manufacturing tools. The environment is organized, quality-focused, and safety-driven, requiring adherence to strict cleanliness and documentation standards. Available Shifts Weekend Day Shift • Saturday & Sunday, • 6:30 AM - 2:30 PM Weekend Evening Shift • Saturday & Sunday, • 2:30 PM - 10:30 PM Weekend Overnight Shift • Saturday & Sunday, • 10:30 PM - 6:30 AM If you have medical device manufacturing experience and are looking to grow your career in a cleanroom environment, we encourage you to apply today!Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Medical Device Assembler Location: San Diego, CA 92121 Employment Type: W2 Contract | 6 Months with Possibility of Extension Pay Rate: $20.66 - $22.66/hour | Paid Weekly Work Model: Fully Onsite Shift: 10:00 PM – 6:30 AM Overtime: As needed based on business requirements Role Overview BEPC is seeking a skilled Medical Device Assembler to join our client's manufacturing team in San Diego, California. This is an excellent opportunity for someone with 2+ years of hands-on assembly experience who enjoys building sophisticated mechanical, electrical, or electronic equipment. In this role, you'll perform detailed assembly activities including wiring, component installation, cable harnessing, instrument assembly, testing, calibration, and inspection. You'll work with hand and power tools while following detailed SOPs, technical drawings, specifications, and quality requirements. This position is ideal for someone who takes pride in precision work and wants to expand their experience within a regulated medical device or diagnostics manufacturing environment. Key Responsibilities • Assemble instruments and components according to established SOPs and work instructions., • Perform wiring, component installation, cable harnessing, fitting, and instrument assembly., • Use hand tools, power tools, manufacturing fixtures, limited automated equipment, and other production equipment., • Build assemblies requiring multiple components, processes, and a high degree of precision., • Become cross-trained across instrument assembly processes., • Perform product testing, calibration, and verification to ensure instrument accuracy, precision, and reliability., • Accurately document testing and calibration results., • Inspect components, assemblies, and finished products to ensure they meet established specifications and quality standards., • Identify and troubleshoot production issues or assembly discrepancies., • Work with engineering, quality, production, product development, and continuous improvement teams to resolve manufacturing issues., • Provide feedback related to product design, manufacturability, and process improvements., • Accurately document production activities, assembly processes, product information, critical material controls, labeling activities, and quality non-conformances., • Focus on achieving first-time-right documentation and assembly quality., • Follow applicable Quality Management System (QMS) requirements., • Follow Good Manufacturing Practices (GMP) and established safety requirements., • Support continuous improvement initiatives designed to improve manufacturing quality and efficiency., • Train other assemblers when qualified and requested., • Perform additional manufacturing duties as assigned. Qualifications Required Qualifications • High School Diploma, GED, or equivalent required., • Minimum 2 years of related assembly or manufacturing experience., • Strong hands-on technical skills involving mechanical, electrical, and/or electronic assembly., • Experience with assembly, testing, or calibration activities., • Ability to read and interpret technical drawings, specifications, work instructions, and assembly procedures., • Proficiency using hand and power tools such as screwdrivers, wrenches, power drivers, and measuring equipment., • Strong mechanical aptitude and hand-eye coordination., • Excellent attention to detail with the ability to perform precise and accurate work., • Basic mathematical skills, including addition, subtraction, and multiplication., • Working knowledge of standard computer programs., • Strong written and verbal communication skills., • Ability to work independently and collaboratively within a team., • Ability to perform effectively in a fast-paced, deadline-driven manufacturing environment., • Ability to lift 50 pounds or more., • Ability to work the required 10:00 PM–6:30 AM shift. Preferred Qualifications • Previous medical device or diagnostics manufacturing experience., • Experience assembling complex instruments or equipment., • Wiring and cable harness assembly experience., • Experience testing and calibrating mechanical, electrical, or electronic equipment., • Familiarity with FDA regulations and ISO standards., • Experience working within a regulated manufacturing environment., • Familiarity with GMP and Quality Management Systems., • Previous troubleshooting or manufacturing process improvement experience. Work Environment This is a hands-on manufacturing position involving detailed assembly of sophisticated instruments and components. Employees will regularly use hand tools, power tools, measuring equipment, manufacturing fixtures, and other production equipment. The role requires accuracy, mechanical aptitude, strong attention to detail, and the ability to follow established manufacturing and quality procedures. Employees may also collaborate with engineering and quality teams to troubleshoot issues and improve manufacturing processes. Candidates must be comfortable working the required 10:00 PM–6:30 AM schedule and lifting 50 pounds or more as required by the position. About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Apply Now! If you have 2+ years of assembly or manufacturing experience and enjoy building, testing, troubleshooting, and working with your hands, we encourage you to apply. Please submit an up-to-date resume with specific examples of how your experience meets the qualifications. Be sure to highlight experience with mechanical or electrical assembly, wiring, cable harnessing, hand and power tools, technical drawings, testing, calibration, medical devices, diagnostics equipment, or regulated manufacturing. \nCompany Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. About BEPC\n\nBEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive.\n\nWith competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth.

Job DescriptionHiring for Entry Level to Experienced Composite Technicians1st and 2nd shift - $21.64/HR - $25/HR Job Description The Composite Technician I supports the fabrication, assembly, and repair of advanced composite structures using materials such as carbon fiber, Kevlar, and fiberglass. Working under supervision, this role focuses on reading and interpreting blueprints, preparing molds, and performing material lay-up, curing, and finishing processes to meet precise engineering specifications. The technician trims, drills, bonds, and fastens components, conducts detailed inspections to ensure quality, and collaborates with engineering, quality, and fabrication teams to resolve assembly challenges. Success in this position requires strong attention to detail, manual dexterity, and hands-on experience with composite materials or aerospace components, while maintaining a safe, organized work environment and following all safety and documentation procedures. Responsibilities • Precisely align and fit composite parts and subassemblies according to engineering drawings and specifications, ensuring correct orientation and proper fit between components., • Apply structural adhesives, sealants, and bonding agents to join composite components using proper techniques to achieve strong, durable bonds and prevent contamination., • Install mechanical fasteners such as rivets, bolts, and screws using hand and power tools, verifying torque values and fastener placement according to specifications., • Integrate hardware such as inserts, bushings, and brackets, and mate composite parts with metallic and non-metallic elements to assemble complex structures., • Prepare bonding surfaces by sanding, cleaning, and treating as required to ensure optimal adhesion and structural integrity., • Set up and use assembly jigs, fixtures, templates, molds, and mandrels to maintain dimensional accuracy and repeatability during assembly processes., • Perform basic functional checks, including fit, movement, and alignment, and conduct preliminary inspections to verify assembly quality before final inspection., • Assist in the preparation of molds and forms used in composite fabrication and lay-up processes., • Mark and cut tape, woven material, honeycomb, adhesive, and similar materials following templates, guides, specific dimensions, and sequences as instructed., • Route, drill, trim, and sand parts to blueprint dimensions and tolerances, ensuring components meet engineering and quality requirements., • Record assembly steps, process parameters, and any deviations from standard procedures, and communicate findings and issues to supervisors or engineering teams., • Maintain required records and documentation in accordance with established procedures., • Support the quality process by keeping the work area in an orderly condition, returning tools, equipment, and materials to proper storage after use., • Observe all applicable laws, regulations, and organizational obligations whenever and wherever business is conducted on behalf of the company., • Work in a safe manner at all times, following established operating procedures, safety practices, and guidelines., • Collaborate closely with engineering, quality, and fabrication teams to resolve assembly challenges and contribute to process improvements., • Use appropriate hand tools such as rollers, paper cutters, scissors, X-Acto knives, electric heat guns, and related fixtures during composite lay-up and finishing., • Use measuring instruments such as scales, protractors, and calipers to verify dimensions and ensure parts conform to specifications., • Lift and handle assemblies weighing up to 50 pounds while following safe material-handling practices., • Work extended hours when required to support production schedules and project deadlines. Essential Skills • Hands-on experience with composite materials, assembly, fabrication, or mechanical work, preferably involving aerospace components or similar precision structures., • Ability to read, interpret, and work from detailed blueprints and other authorized drawings and documents., • Strong verbal communication skills with the ability to clearly understand and follow written and verbal instructions., • Capability to perform simple mathematical calculations to support measurement, layout, and fabrication tasks., • Proficiency using hand tools such as rollers, paper cutters, scissors, X-Acto knives, electric heat guns, and related fixtures including molds and mandrels., • Ability to use measuring instruments such as scales, protractors, and calipers to verify dimensions and tolerances., • Familiarity with composite manufacturing processes including lay-up, lamination, vacuum bagging, prepreg handling, and autoclave or similar curing operations., • Experience working with materials such as carbon fiber, Kevlar, fiberglass, honeycomb core, and structural adhesives., • Comfort working in a manufacturing or aerospace environment that may be loud and require extended hours., • Physical ability to lift assemblies weighing up to 50 pounds in a safe and controlled manner., • Strong work ethic and work stability, demonstrating reliability, consistency, and commitment to high-quality work., • Attention to detail and manual dexterity to perform precise cutting, trimming, drilling, sanding, and bonding operations., • Ability to follow established safety procedures and maintain an organized, clean work area., • Willingness and ability to obtain respirator certification if required for certain tasks. Additional Skills & Qualifications • Experience in aerospace manufacturing environments, particularly with advanced composite structures., • Knowledge of mechanical fastening techniques, including proper torque application and fastener verification., • Familiarity with component integration involving inserts, bushings, brackets, and mating composite parts with metallic and non-metallic elements., • Experience using assembly jigs, fixtures, templates, molds, and mandrels to maintain dimensional accuracy and repeatability., • Understanding of surface preparation techniques, including sanding, cleaning, and treating bonding surfaces to enhance adhesion., • Background in functional testing of assemblies, including checks for fit, movement, and alignment prior to final inspection., • Ability to document process parameters, assembly steps, and deviations, and to communicate effectively with engineering and quality teams., • Comfort working within structured quality systems and following established documentation and record-keeping practices., • Adaptability to a 9/80 work schedule and first-shift operations, with flexibility to work extended hours as needed. Why Work Here? You join a team that works on advanced, high-precision composite structures that support cutting-edge aerospace and technology applications. The environment emphasizes safety, quality, and collaboration, giving you the opportunity to learn from experienced engineering, quality, and fabrication professionals. You benefit from a structured schedule that supports work-life balance while gaining hands-on experience with modern manufacturing processes and equipment. This role offers a strong foundation for career growth in composites and aerospace, with exposure to innovative materials, tools, and techniques in a supportive and professional setting. Work Environment This role is based in a manufacturing environment focused on advanced composite and aerospace components. You work on a first-shift schedule, typically from 5:00 a.m. to 2:30 p.m., following a 9/80 work pattern that provides regular extended weekends and predictable hours. The facility uses technologies and processes such as composite lay-up, lamination, vacuum bagging, prepreg handling, autoclave curing, routing, drilling, trimming, sanding, and functional testing. You regularly use hand tools including rollers, paper cutters, scissors, X-Acto knives, electric heat guns, and measuring instruments such as scales, protractors, and calipers. The environment can be loud, and you may be required to work extended hours to meet production needs. Some tasks may require respirator use and certification, and you are expected to follow all safety procedures, maintain an orderly work area, and wear appropriate work attire suitable for a manufacturing and shop-floor setting. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $21.64 - $21.64/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Oct 5, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description ASSEMBLER TECHNICIAN - Rancho Bernardo, CA - 1st Shift Job Description • As an assembler, you will build and validate precision opto-mechanical assemblies following detailed procedures. You will utilize standardized tools and electric equipment, such as torque wrenches and pneumatic screwdrivers, to perform mechanical assembly. Your role will involve entering data into company databases and conducting inspections and tests throughout the production process. Responsibilities • Build and validate precision opto-mechanical assemblies according to procedures., • Use standardized tools and electric equipment for mechanical assembly., • Enter data into company databases., • Perform simple standardized inspections/tests during production., • Collaborate with engineers for special builds and experiments., • Work with peers and supervisors to resolve issues., • Operate precision cleaning machinery., • Prepare completed assemblies for shipment., • Recommend procedural improvements to management., • Ensure quality control measures are followed for module production., • Identify and document discrepant material., • Perform other duties as assigned. Essential Skills • Assembly and repair skills., • Proficiency in using hand tools and electric/pneumatic tools., • Ability to read blueprints and engineering drawings., • Strong mechanical aptitude., • Excellent written and verbal communication skills., • Ability to analyze data and report problems effectively., • Experience with MS Word, Excel, PowerPoint, and email systems. Additional Skills & Qualifications • Experience with electro-optical and/or opto-mechanical systems., • Ability to detect visible defects with 20/20 or corrected vision., • Understanding of customer relationship building and service skills., • Experience in environmental testing is desired. Why Work Here? • Join a team that values collaboration and innovation. Benefit from a supportive work environment that encourages continuous learning and professional growth. Enjoy the opportunity to work with cutting-edge technologies in a cleanroom setting. Work Environment • The position involves working on either the first or second shift from Monday to Friday, with comfort in a cleanroom environment essential. Physical demands include sitting, walking, and handling materials, with occasional lifting of up to 20 pounds. The work setting is generally moderate in temperature and noise, with opportunities for occasional travel depending on business needs. Employees are expected to work under deadlines and interact with colleagues across various scenarios. Apply today! Positions are filling quickly. Start your new career in manufacturing now! Job Type & Location This is a Contract position based out of SAN DIEGO, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in SAN DIEGO,CA. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description We are seeking an experienced Wire & Harness Electronics Assembler with strong hands-on experience assembling complex cable and wire harnesses in a quality-driven manufacturing environment. Key Responsibilities: • Assemble complex wire harnesses, cables, and electromechanical components., • Perform wire stripping, tinning, crimping, soldering, and termination., • Route, lace, and secure wires according to specifications., • Read and interpret electrical schematics, wiring diagrams, assembly drawings, and BOMs., • Support First Article Assembly (FAI) builds and collaborate with engineering on build issues., • Perform inspections, continuity testing, troubleshooting, rework, and repairs., • Complete production documentation and follow quality and safety standards. Key Qualifications: • 5+ years of hands-on wire and cable harness assembly experience., • Strong soldering, crimping, wire preparation, and harness routing skills., • Experience with First Article Assembly (FAI)., • Ability to independently read schematics, wiring diagrams, and assembly drawings., • Proficiency with hand tools, crimp tools, soldering equipment, and basic electrical testing., • Strong attention to detail, manual dexterity, and ability to work independently., • High school diploma or GED., • Willingness to work overtime, including weekends, as needed. Preferred: • Experience in aerospace, defense, medical device, or other regulated manufacturing environments., • ISO 9001 knowledge and experience training or leading other assemblers. 1st Shift : 5:00am - 1:30pm Compensation : $27.00 - $32.00 D.O.E. \nCompany Description Marquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities. Marquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path. Apply with us! Marquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities.\r\n\r\nMarquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path.\r\nApply with us!

Job Description Job Title: Cleanroom Technician Job Description The Cleanroom Technician assembles precision components for medical devices, follows detailed production instructions, and performs micro-level laser processing and inspection in a controlled cleanroom environment. This role focuses on producing high-quality parts through careful assembly, measurement, and documentation while supporting both volume manufacturing and research and development activities. Responsibilities • Assemble panels and components for medical devices by following detailed instructions in the form of drawings, written procedures, and verbal directions., • Process components through each production step in accordance with established manufacturing instructions and quality standards., • Inspect parts for quality and defects using visual inspection, microscopes, and measurement tools to ensure all products meet specifications., • Perform micro laser ablation on arterial stents, ensuring precise material removal and adherence to dimensional requirements., • Carry out micro laser etching on dental implant parts with a high level of accuracy and consistency., • Measure parts using calipers, micrometers, and other measuring equipment to verify dimensions and tolerances., • Document production activities by accurately completing job travelers, including all required data fields and process steps., • Prepare and complete certificates of conformance, ensuring all required information is accurate and properly recorded., • Sign off on job travelers to confirm that all production and inspection steps have been completed according to procedure., • Create and apply labels for parts and finished products, ensuring correct identification and traceability., • Operate production and cleanroom equipment safely and efficiently while following standard operating procedures., • Maintain a clean and organized workstation within the cleanroom, adhering to all cleanliness and contamination control requirements., • Support quality assurance and inspection activities by reporting nonconformances and contributing to continuous improvement efforts. Essential Skills • At least 2 years of experience in manufacturing., • Previous medical device manufacturing experience (required)., • Proficiency using calipers, micrometers, and other precision measuring equipment., • Ability to measure parts accurately and interpret measurement results against specifications., • Experience working in a production environment, preferably in a cleanroom setting., • Strong attention to detail for inspection, quality assurance, and documentation., • Ability to follow detailed written, verbal, and drawing-based instructions., • Comfort working with microscopes and small components for inspection and assembly., • Basic data entry skills for completing job travelers, certificates of conformance, and labels., • Ability to lift up to 20 lbs and remain seated for extended periods while performing repetitive tasks. Additional Skills & Qualifications • Experience with medical device assembly and inspection processes., • Familiarity with cleanroom protocols and contamination control practices., • Background in micro-scale manufacturing, such as micro laser ablation or etching, is highly beneficial., • Experience supporting both high-volume production and research and development activities., • Strong organizational skills for managing documentation and production records., • Ability to work independently on weekends while collaborating effectively with the broader team during training and coordination. Why Work Here? You will join a small, specialized medical device site that offers the stability and resources of a larger organization, giving you exposure to both high-volume manufacturing and cutting-edge research and development projects. The environment supports learning and growth, with opportunities to develop advanced skills in precision manufacturing and cleanroom operations. The weekend-focused schedule can offer additional flexibility, while training is thoughtfully arranged to accommodate your availability during the week. Work Environment This role is based in a medical device cleanroom manufacturing environment, where you will work with precision equipment such as microscopes, micro laser systems, calipers, and micrometers. The position follows a weekend schedule, with work on Saturdays and Sundays on first shift from 6:30 a.m. to 2:30 p.m., and an additional 30 minutes of paid time provided to reach an 8-hour day. Initial training takes place during standard first-shift hours on weekdays, with flexibility to space out training days to align with your availability. You will spend most of the day seated at a workstation, with the option to stand as desired, and must be comfortable lifting up to 20 lbs. The cleanroom environment requires adherence to strict cleanliness and handling procedures, and you will work with medical device components in a controlled, organized, and safety-focused setting. 2 opening Saturday/Sunday, 230pm to 1030pm & 2 opening Sat/Sun 630am-2:30pm230pm to 1030pm (2 opening)630am 230pm (1 opening)1030pm to 630am (1 opening)Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Experienced Electro-Mechanical & Electronic Assemblers | $23+/Hour Express Employment Professionals | San Diego, CA Express Employment Professionals is currently recruiting for multiple Electro-Mechanical, Electronic, and Technical Assembly positions with established companies throughout the San Diego area. Pay: $23+/hour, depending on experience We are looking for hands-on candidates who enjoy working with tools, mechanical components, wiring, electronics, and detailed assembly instructions. What You May Be Doing • Assemble electro-mechanical and electronic components and equipment, • Work from mechanical drawings, wiring schematics, blueprints, and assembly instructions, • Use hand tools, power tools, soldering equipment, fixtures, and test equipment, • Perform basic testing, troubleshooting, and quality inspections, • Complete wiring, cable, and small electronic assembly, • Follow established production, quality, and safety procedures, • Maintain a clean and organized work area, • Work closely with production and engineering teams What We're Looking For • 1+ years of relevant assembly, manufacturing, or technical production experience preferred, • Experience with electro-mechanical or electronic assembly is a plus, • Ability to read and follow detailed drawings, schematics, and written instructions, • Comfortable using hand and power tools, • Soldering experience is a plus, • Strong attention to detail and commitment to quality, • Reliable attendance and transportation, • Ability to work independently and as part of a team Experience That May Be a Good Fit We are interested in candidates with backgrounds such as: • Electro-Mechanical Assembly, • Electronic Assembly, • PCB/PCBA Assembly, • Cable & Wire Harness Assembly, • Soldering, • Mechanical Assembly, • Production Assembly, • Test Technician, • Manufacturing Technician, • Aerospace, defense, medical device, or other regulated manufacturing Additional certifications such as IPC-A-610, J-STD-001, IPC-7711, or experience working in ISO-regulated environments are a plus. Why Apply Through Express? Express Employment Professionals works with a variety of San Diego companies and can connect qualified candidates with multiple opportunities based on their skills, experience, and career goals. Apply today to be considered for current and upcoming Electro-Mechanical and Technical Assembly positions. Pay: $23+/hour DOE Schedule: Full-time opportunities available; schedules vary by position. \nCompany Description Express Employment Culture We help people in our community find work every day. Express Employment Professionals is in the business of helping good people find good jobs. We want to make a difference locally and across North America. With more than 800 locations across the U.S., Canada, and South Africa, we are on a mission to put a million people to work annually. Thank you and we look forward to learning more about you! Express Employment Culture\r\nWe help people in our community find work every day. Express Employment Professionals is in the business of helping good people find good jobs. We want to make a difference locally and across North America. With more than 800 locations across the U.S., Canada, and South Africa, we are on a mission to put a million people to work annually. \r\n\r\nThank you and we look forward to learning more about you!

Job Description ELECTRICAL / MECHANICAL ASSEMBLER Location: San Diego, CA 92121 Pay Rate: $19.00 per hour Schedule: Monday–Thursday, 4:00 AM–2:30 PM Employment Type: Contract GENERAL SUMMARY Under direct supervision, the Electrical/Mechanical Assembler performs electrical and/or mechanical assembly work supporting a variety of component configurations and end-users. Work may be performed in a cleanroom manufacturing environment or a standard manufacturing environment depending on business and staffing needs. Employees may also rotate between products as directed by business requirements. PRIMARY DUTIES & RESPONSIBILITIES Participate in production builds as directed by the supervisor to support the manufacturing schedule. Follow SOPs, Work Instructions, and verbal instructions to complete assigned work. Communicate and coordinate work instructions with fellow employees as needed. Receive training and perform electrical and/or mechanical assembly and rework activities. Examine components and assemblies and identify potential defects or quality issues. Notify the supervisor of high component usage or low stocking levels of materials. Provide feedback to supervisors and engineering regarding manufacturability issues. Maintain a clean, organized, and safe work environment. Perform other duties as assigned. REQUIRED QUALIFICATIONS Knowledge, Skills & Abilities Experience using small-scale electromechanical assembly tools such as: Torque wrenches Screwdrivers Tweezers UV light sources Adhesive dispensers Ability to work in a cleanroom manufacturing environment. Ability to follow GMP (Good Manufacturing Practices). Ability to perform basic mathematical calculations using whole numbers, fractions, and decimals. Ability to clearly communicate and comprehend written and verbal instructions. Ability to work effectively as part of a team. Demonstrated ability to work accurately, follow detailed instructions, and multitask. Education High School Diploma required. Some post-high-school technical training preferred. Experience More than 1 year of experience in instrumentation, biomedical, medical device, consumer electronics, or a related manufacturing environment preferred. Assembly experience in one or more of the following areas: Microscope or magnification work Plastic components, adhesives, and simple fixturing Manual, semi-automatic, or automated assembly equipment Cleanroom manufacturing practices Experience working in an ISO/GMP-regulated environment preferred. SCOPE OF WORK Learn job-specific skills, company policies, and procedures to complete routine assignments. Perform routine tasks requiring limited judgment. Follow detailed instructions and work under close supervision. PHYSICAL REQUIREMENTS The employee is regularly required to stand, walk, sit, use hands and fingers to handle tools and components, reach with hands and arms, climb or balance, stoop, kneel, crouch, see, talk, and hear. The position requires repetitive hand motions and close attention to small components, tools, and controls. Specific vision abilities include close vision, color vision, and the ability to adjust focus. May occasionally lift and/or move up to 45 pounds. Must wear personal protective equipment as required. Must be able to work the assigned schedule and may be required to work additional shifts based on business needs. TO APPLY Please send your resume in Word or PDF format and include your desired shift and pay range. Anne Marie Roberts Manpower San Diego Recruiter 5280 Carroll Canyon Rd., Ste. #150 San Diego, CA 92121 Email: aroberts@manpowerwest.com

Job DescriptionHiring for Entry Level to Experienced Composite Technicians1st and 2nd shift - $21.64/HR - $25/HR Job Description The Composite Technician I supports the fabrication, assembly, and repair of advanced composite structures using materials such as carbon fiber, Kevlar, and fiberglass. Working under supervision, this role focuses on reading and interpreting blueprints, preparing molds, and performing material lay-up, curing, and finishing processes to meet precise engineering specifications. The technician trims, drills, bonds, and fastens components, conducts detailed inspections to ensure quality, and collaborates with engineering, quality, and fabrication teams to resolve assembly challenges. Success in this position requires strong attention to detail, manual dexterity, and hands-on experience with composite materials or aerospace components, while maintaining a safe, organized work environment and following all safety and documentation procedures. Responsibilities • Precisely align and fit composite parts and subassemblies according to engineering drawings and specifications, ensuring correct orientation and proper fit between components., • Apply structural adhesives, sealants, and bonding agents to join composite components using proper techniques to achieve strong, durable bonds and prevent contamination., • Install mechanical fasteners such as rivets, bolts, and screws using hand and power tools, verifying torque values and fastener placement according to specifications., • Integrate hardware such as inserts, bushings, and brackets, and mate composite parts with metallic and non-metallic elements to assemble complex structures., • Prepare bonding surfaces by sanding, cleaning, and treating as required to ensure optimal adhesion and structural integrity., • Set up and use assembly jigs, fixtures, templates, molds, and mandrels to maintain dimensional accuracy and repeatability during assembly processes., • Perform basic functional checks, including fit, movement, and alignment, and conduct preliminary inspections to verify assembly quality before final inspection., • Assist in the preparation of molds and forms used in composite fabrication and lay-up processes., • Mark and cut tape, woven material, honeycomb, adhesive, and similar materials following templates, guides, specific dimensions, and sequences as instructed., • Route, drill, trim, and sand parts to blueprint dimensions and tolerances, ensuring components meet engineering and quality requirements., • Record assembly steps, process parameters, and any deviations from standard procedures, and communicate findings and issues to supervisors or engineering teams., • Maintain required records and documentation in accordance with established procedures., • Support the quality process by keeping the work area in an orderly condition, returning tools, equipment, and materials to proper storage after use., • Observe all applicable laws, regulations, and organizational obligations whenever and wherever business is conducted on behalf of the company., • Work in a safe manner at all times, following established operating procedures, safety practices, and guidelines., • Collaborate closely with engineering, quality, and fabrication teams to resolve assembly challenges and contribute to process improvements., • Use appropriate hand tools such as rollers, paper cutters, scissors, X-Acto knives, electric heat guns, and related fixtures during composite lay-up and finishing., • Use measuring instruments such as scales, protractors, and calipers to verify dimensions and ensure parts conform to specifications., • Lift and handle assemblies weighing up to 50 pounds while following safe material-handling practices., • Work extended hours when required to support production schedules and project deadlines. Essential Skills • Hands-on experience with composite materials, assembly, fabrication, or mechanical work, preferably involving aerospace components or similar precision structures., • Ability to read, interpret, and work from detailed blueprints and other authorized drawings and documents., • Strong verbal communication skills with the ability to clearly understand and follow written and verbal instructions., • Capability to perform simple mathematical calculations to support measurement, layout, and fabrication tasks., • Proficiency using hand tools such as rollers, paper cutters, scissors, X-Acto knives, electric heat guns, and related fixtures including molds and mandrels., • Ability to use measuring instruments such as scales, protractors, and calipers to verify dimensions and tolerances., • Familiarity with composite manufacturing processes including lay-up, lamination, vacuum bagging, prepreg handling, and autoclave or similar curing operations., • Experience working with materials such as carbon fiber, Kevlar, fiberglass, honeycomb core, and structural adhesives., • Comfort working in a manufacturing or aerospace environment that may be loud and require extended hours., • Physical ability to lift assemblies weighing up to 50 pounds in a safe and controlled manner., • Strong work ethic and work stability, demonstrating reliability, consistency, and commitment to high-quality work., • Attention to detail and manual dexterity to perform precise cutting, trimming, drilling, sanding, and bonding operations., • Ability to follow established safety procedures and maintain an organized, clean work area., • Willingness and ability to obtain respirator certification if required for certain tasks. Additional Skills & Qualifications • Experience in aerospace manufacturing environments, particularly with advanced composite structures., • Knowledge of mechanical fastening techniques, including proper torque application and fastener verification., • Familiarity with component integration involving inserts, bushings, brackets, and mating composite parts with metallic and non-metallic elements., • Experience using assembly jigs, fixtures, templates, molds, and mandrels to maintain dimensional accuracy and repeatability., • Understanding of surface preparation techniques, including sanding, cleaning, and treating bonding surfaces to enhance adhesion., • functional testing of assemblies, including checks for fit, movement, and alignment prior to final inspection., • Ability to document process parameters, assembly steps, and deviations, and to communicate effectively with engineering and quality teams., • Comfort working within structured quality systems and following established documentation and record-keeping practices., • Adaptability to a 9/80 work schedule and first-shift operations, with flexibility to work extended hours as needed. Why Work Here? You join a team that works on advanced, high-precision composite structures that support cutting-edge aerospace and technology applications. The environment emphasizes safety, quality, and collaboration, giving you the opportunity to learn from experienced engineering, quality, and fabrication professionals. You benefit from a structured schedule that supports work-life balance while gaining hands-on experience with modern manufacturing processes and equipment. This role offers a strong foundation for career growth in composites and aerospace, with exposure to innovative materials, tools, and techniques in a supportive and professional setting. Work Environment This role is based in a manufacturing environment focused on advanced composite and aerospace components. You work on a first-shift schedule, typically from 5:00 a.m. to 2:30 p.m., following a 9/80 work pattern that provides regular extended weekends and predictable hours. The facility uses technologies and processes such as composite lay-up, lamination, vacuum bagging, prepreg handling, autoclave curing, routing, drilling, trimming, sanding, and functional testing. You regularly use hand tools including rollers, paper cutters, scissors, X-Acto knives, electric heat guns, and measuring instruments such as scales, protractors, and calipers. The environment can be loud, and you may be required to work extended hours to meet production needs. Some tasks may require respirator use and certification, and you are expected to follow all safety procedures, maintain an orderly work area, and wear appropriate work attire suitable for a manufacturing and shop-floor setting. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $21.64 - $21.64/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Entry Level Electronics Assembler - Kearny Mesa - $19/hr Job Description We are seeking a dedicated General Production Worker to perform a variety of assembly operations on electronic components and subassemblies. The role involves working from samples, technical blueprints, and specifications to assemble cable and wire harnesses, crimping and stripping wires, and performing box builds and kitting from start to finish under direct supervision. Responsibilities • Assemble, label, cut wires, stuff, bag and tag, heat shrink, back shell, harness, and kit products., • Work with diagrams, blueprints, measuring rulers, and small hand tools., • Perform other duties and special projects as assigned. Essential Skills • Experience in production, general labor, and machine operation., • Proficiency in crimping., • Ability to work from diagrams and blueprints., • Good hand/eye coordination and the ability to use microscopes., • Attention to detail and ability to distinguish colors., • Ability to use hand tools such as long nose pliers and side cutters., • Capability to follow both verbal and written instructions., • Ability to compute measurements accurately. Additional Skills & Qualifications • Ability to work autonomously in a quiet manufacturing setting. Why Work Here? Join a company that values its employees by offering comprehensive benefits including medical insurance, employee stock ownership plans, life insurance, 401k plans, and bonuses. Employees, even contractors, receive a Christmas bonus as a token of appreciation for their hard work. Work Environment The position offers a first shift schedule from 7am to 3:30pm in a manufacturing setting. The work environment is quiet, with no cell phones allowed on the production floor to ensure focus and productivity. Employees work autonomously, allowing for personal accountability and growth. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $19.00 - $19.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 27, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Join Essel and kickstart your construction career today! We are seeking dedicated and reliable individuals to fill the role of General Construction Laborer. You will assist in various construction projects, contributing to our mission of delivering high-quality work throughout the Bay Area. Some of our best performers earn opportunities to work on bigger projects with more pay! Responsibilities: • Loading and unloading materials, tools, and equipment., • Preparing and cleaning construction sites to ensure safety and efficiency., • Assisting in the assembly and disassembly of temporary structures and scaffolding., • Utilizing proper traffic management and flagging techniques when required., • Supporting tradesmen and gaining valuable skills in the process. Requirements • Previous experience in construction is preferred., • Eagerness to learn and undergo training as needed., • Must be reliable and dependable, with a strong work ethic., • Ability to respond quickly to communication since project needs can change rapidly., • Available to work W2 Full Time, Monday to Friday, with potential for overtime and weekend work. Benefits We offer steady work, great pay, sick time and vacation time as part of your employment. Medical benefits and 401k are offered after qualifying period stipulations are met. 60-day probationary period applies to all new employees.

Job Description 2nd Shift Welder Fitter $25-$30/hr+ - EL Cajon, 92020 - Mon through Thurs 4pm-2:30am Job Description We are seeking a skilled welder fitter to perform TIG/MIG welding on assemblies, assisting the journeyman welder with fit-up and fabrication. This role requires reading blueprints, using fixtures, and operating hand grinders. The position is on-site at El Cajon, CA, four days a week. Responsibilities • Apply TIG/MIG welds on assemblies., • Assist with fit-up and fabrication according to drawings., • Operate hand grinders., • Weld exotic materials, including alloys, inconel, and 300/400 series stainless steel., • Handle different thickness of materials such as .032, .060, .090, .0188., • Weld using back gaps., • Set up weld machines, including adjusting amperage and interpreting weld symbols. Essential Skills • Proficiency in TIG and MIG welding., • Ability to read and interpret blueprints., • Experience with welding assembly and fixture usage., • Knowledge of GTAW and GMAW processes., • Skill in welding exotic materials such as alloys, stainless steel, and inconel. Additional Skills & Qualifications • Ownership of a personal welding hood., • Willingness to work on assigned jobs both inside and outside the welding field., • Ability to fabricate parts under supervision., • Skill in documenting work, including type of rod used and type of weld., • Competence in identifying materials and setting on traveler. Why Work Here? Join a team dedicated to quality craftsmanship in a supportive environment. Enjoy a balanced work schedule and opportunities for skill enhancement and career growth. Work Environment Work on-site at El Cajon, CA, from 4:00pm - 2:30am. The role involves handling various welding technologies and equipment, ensuring detailed craftsmanship and safety Job Type & Location This is a Contract to Hire position based out of El Cajon, CA 92020. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Cajon,CA 92020. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Packer – Airline Beverage & Food Assembler San Diego, CA Pay: Up to $18.00/hour | Full-Time | Permanent Hiring Immediately — Must be 21+ Candidates must be available to work any day of the week. About the Role We're hiring full-time team members to help prepare products for airline, e-commerce, and retail customers. Our company is a global leader in end-to-end airline catering and hospitality services, with over 75 years of industry experience and a growing footprint in convenience retail and subscription food service. What You'll Do Assemble dry goods, beverages, and liquor items following standard procedures and assembly diagrams Sort, wrap, and pack airline dry goods, liquor, and equipment into airline carts per customer specifications Maintain production areas in compliance with HACCP, FDA, USDA, and customer sanitation standards Ensure accurate liquor inventory management and documentation Take on additional duties as needed What We're Looking For No experience necessary — full training provided Must be able to read and understand basic diagrams and specifications in English Strong attention to detail, organization, and accuracy Comfortable adapting to frequent changes in specs and diagrams Able to work in a fast-paced environment under time pressure Basic math skills Able to stand, walk, bend, and stoop for a full shift (8–12 hours) Able to lift up to 30 lbs regularly and push/pull up to 70 lbs Able to work occasionally in a 38°ree;F cold room when required Reliable attendance and a team-oriented mindset Schedule & Work Environment 24/7 operation — must be flexible to work nights, weekends, and holidays, subject to shift bidding Full-time availability required, including weekends/holidays as needed Eligibility Requirements Must be 21+ and eligible to work in the U.S. Must pass a background check Must be able to complete the application/orientation process in English This is a union position; union dues apply after 60 days Benefits Weekly pay, free lunches, free uniforms and shoes, and a full benefits package after 30 days — including 401(k), medical, dental, vision, life, and disability insurance.

As a Ballpark Security Supervisor, you will be responsible for ensuring that the San Diego Padres Security Department provides the highest level of professionalism and impeccable safety and security to all players, talent, employees, and guests of Petco Park, enabling them to positively experience Americas Best Ballpark. You will accomplish this by providing operational leadership directing Ballpark Security Officers, coordinating daily security operations, and responding to incidents and operational needs. The Ballpark Security Supervisor will also serve as the designated Security Manager on Duty (MOD) for small-scale events held at Petco Park, ensuring that security operations are effectively managed and that all activities are conducted in accordance with department procedures, organizational standards, and Major League Baseballs Best Stadium Operating Practices (MLB BSOP). All the responsibilities we will trust you with: • Always representing the Club in a positive and professional manner, • Other duties as assigned, • Oversee Daily Security Operations, • Supervise 24/7 security staffing and shift coverage, • Conduct daily shift briefings to ensure that assigned officers are prepared for their shift and receive all necessary training and information, • Monitor Avigilon surveillance systems and coordinate incident responses, • Ensuring security officers are trained to utilize Raven Controls Incident Management Software for all department logs, reports, equipment inventory, preventative maintenance and shift pass on reports are accurately maintained, • Maintain accurate incident logs, investigation reports, and security audits, • Provide regular updates to management and stakeholders, • Supervise and lead escalated issues with patrons, VIPs, and staff professionally, • Promote a safe and welcoming environment for all facility users, • Assist in the development and enforcement of Security Protocols, • Ensure compliance with organizational standard operating procedures (SOPs), • Ensure compliance with local, state, and federal regulations including those outlined by the California Bureau of Security & Investigative Services (BSIS), • Event Security Planning and Execution, • Attend necessary meetings to obtain event operations and disseminate to department staff, • Coordinate Ballpark Security support for Padres games, concerts, and other large gatherings, • Liaise with law enforcement, emergency services, and event organizers, • Personnel Management, • Assist in the recruitment, training, and supervision of security staff and contractors including Allied Enhanced Protection Explosive Detection Canines, • Conduct and participate in ongoing professional development, • Emergency Preparedness and Response, • Work with the Manager, Ballpark Security and Director, Security & Transportation to implement emergency action plans for fire, medical, and active threat scenarios, • Assist in the development of regular drills and post-incident evaluations, • Access Control and Perimeter Security, • Oversee badge systems, entry checkpoints, and credentialing procedures, • Ensure physical barriers and alarm systems are functioning properly, • Risk Assessment and Threat Analysis, • Identify vulnerabilities and recommend mitigation strategies, • Stay informed on emerging threats and adjust protocols accordingly, • Technology Integration and Maintenance, • Work with IT to ensure cybersecurity measures for security systems, • Oversee the upkeep of cameras, alarms, and communication tools Your areas of knowledge and expertise that matter most: • Maintain consistent, punctual, and reliable attendance, • Possess a high degree of discretion, integrity, professionalism, and accountability, • Must possess effective written and oral communication and interpersonal skills with the ability to deal with all levels of personnel and the general public professionally and effectively; must be able to use initiative and independent judgment within established guidelines, • Proficient in computer skills in Microsoft Office, including Word, Excel, PowerPoint, and Outlook. Experience in report writing, Motorola Solutions Avigilon CCTV System a plus but not necessary, • Having previous experience working in large public assembly facilities is a plus, but not necessary, • Large event security experience is a plus, but not necessary, • Having completed courses in criminal justice or security training by a recognized academy, school, or organization is a plus, but not necessary, • Previous Law Enforcement/Public Safety experience is a plus, but not necessary, • Fluently bilingual in English/Spanish, a plus You will be required to meet the following: • Must have a valid current driver's license with a good driving record (subject to review), • Must be available to work five 8-hour flexible shifts per work week (SaturdayFriday), scheduled between 5:00 AM and 10:30 PM. Weekly schedules will vary based on operational needs, Padres games, and special events at Petco Park . Must be available to work overtime shifts, including weekends and holidays, as needed, • Must possess BSIS Proprietary Security Guard certification or BSIS Guard Card, or obtain within the first 30 days of employment, • Previous Law Enforcement/Public Safety or Military experience a plus, • Previous experience in large public assembly facilities is highly desirable, • Willing and able to travel approximately 10% of scheduled shifts annually, • Maintain consistent, punctual, and reliable attendance, • Having a strong ability to communicate effectively and work well with others in a collaborative, respectful manner, • Minimum physical requirements: able to travel to and gain access to various areas of the ballpark for prolonged periods of time during games and events; able to lift and transport up to 50 pounds; traverse stairs, steps and ramps, • As a condition of employment, you must successfully complete all post-offer, pre-employment requirements, including but not limited to a background check Pay and additional compensation: Per the California pay transparency law, the base pay range for this full-time position is $25.38. As a candidate for this position, your pay and related elements of compensation will be contingent upon your work experience, education, job-related skills and any other factors the San Diego Padres considers relevant to the hiring decision for this position. In addition to the base salary, the Padres believe in providing a very competitive and generous compensation and benefits package for its employees. Benefits include, but are not limited to: Medical, Dental, Vision, 401(k) with employer match + automatic company Safe Harbor contribution, Basic Life Insurance (with option to purchase Supplemental Life Insurance), Pet Insurance, generous paid time off (PTO) and holiday program, paid employee parking, onsite barista service, lunch provided weekly, employer provided game tickets to home games, onsite fitness classes and experiences, ballpark discounts on food and retail, work from home Fridays (during the offseason and when team is on the road), smart casual dress code and so much more! All benefits are subject to eligibility requirements and the terms of official plan documents which may be modified or amended at any given time. The San Diego Padres are an Equal Opportunity Employer.

Job Description As a Process Technician 3, you will work closely with Process Development and Engineering teams to develop, implement, optimize, and sustain manufacturing processes for Monarch Quantum’s photonic “engines.” This is a highly hands-on role supporting prototype builds, process development, equipment operation, troubleshooting, and transition of processes toward production. You will operate and support a variety of precision manufacturing and laboratory equipment, execute engineering-directed processes, collect and document process data, and help identify opportunities to improve process capability, equipment performance, quality, and manufacturing efficiency. The ideal candidate has strong hands-on experience with semiconductor, electronics, photonics, or precision manufacturing processes and is comfortable working directly with engineers to develop and refine processes and equipment. This role may also serve as a technical resource and subject-matter expert for specific manufacturing equipment or processes. Key Responsibilities • Execute, develop, and optimize manufacturing processes under the direction of Process Development and Engineering., • Operate, troubleshoot, and maintain precision manufacturing and laboratory equipment., • Support processes including die attach, wire bonding, soldering, reflow, cleaning, inspection, curing, and other photonic/electronic assembly operations., • Set up equipment, fixtures, tooling, materials, and process parameters for engineering builds and prototype manufacturing., • Develop and adjust equipment parameters and process settings to achieve required performance and quality., • Assist engineers with process development experiments, DOE activities, process characterization, and prototype builds., • Collect, record, and analyze process data to support process development and continuous improvement., • Identify equipment, tooling, material, and process issues and work with engineers to determine root causes and corrective actions., • Perform preventive maintenance, basic calibration, equipment checks, and troubleshooting activities., • Support equipment installation, qualification, validation, and implementation of new manufacturing processes., • Maintain process documentation, work instructions, equipment procedures, and process records., • Inspect assemblies and work products to verify compliance with engineering requirements and specifications., • Support material preparation, inventory management, kitting, receiving, and laboratory organization., • Maintain cleanroom and laboratory areas in accordance with cleanliness, ESD, safety, and contamination-control requirements., • Train and mentor junior technicians on equipment operation, manufacturing processes, and laboratory practices., • Serve as a subject-matter expert for assigned equipment and processes., • Collaborate closely with Process Development, Mechanical, Electrical, Optical, and Manufacturing Engineering teams., • Support transition of processes from engineering development into repeatable manufacturing processes., • Participate in continuous improvement activities focused on yield, cycle time, process capability, equipment utilization, and manufacturing efficiency., • Other duties as assigned. Requirements Experience • Associate degree in a relevant technical field, or equivalent combination of education and hands-on technical experience., • 8+ years of relevant experience in semiconductor, photonics, electronics, precision manufacturing, or a similar technology-focused environment., • Demonstrated hands-on experience operating and troubleshooting precision manufacturing equipment., • Experience working directly with engineers in prototype, R&D, process development, or low-volume manufacturing environments., • Strong ability to interpret engineering drawings, specifications, work instructions, and technical documentation., • Demonstrated ability to work independently while effectively communicating with engineering and manufacturing teams., • Experience working in cleanroom, laboratory, or controlled manufacturing environments. Preferred Skills • Hands-on experience with die attach and wire bonding equipment., • Experience operating and maintaining die bonders, wire bonders, reflow equipment, plasma systems, curing/bake ovens, or other precision process equipment., • Experience developing and adjusting equipment parameters and basic machine programs., • Experience with semiconductor, RF, laser, photonics, or microelectronics assembly processes., • Experience with manual and automated die attach processes., • Experience with gold and/or aluminum wire bonding., • Experience with soldering and rework of electronic assemblies., • Experience performing destructive testing such as wire pull and die shear., • Experience with equipment calibration, preventive maintenance, and troubleshooting., • Experience with process characterization, DOE, or other structured process-development methods., • Familiarity with ESD-controlled and cleanroom manufacturing environments., • Proficiency with common measurement and inspection tools including microscopes, calipers, micrometers, multimeters, gauges, and other laboratory equipment., • Strong attention to detail and commitment to quality., • Strong written and verbal communication skills. Additional Skills • Ability to become a subject-matter expert for assigned manufacturing equipment and processes., • Experience training and mentoring technicians across processes with varying levels of maturity., • Ability to troubleshoot equipment and process issues using structured problem-solving methods., • Experience supporting equipment installation, acceptance, qualification, or validation., • Experience with preventive maintenance and basic equipment calibration., • Experience developing or improving work instructions, process documentation, and equipment procedures., • Experience with 5S, lean manufacturing, or other workplace/process organization methodologies., • Experience with inventory management, material control, and engineering build kitting., • Ability to work effectively in a fast-paced startup environment where processes and equipment are continually evolving., • Willingness and ability to learn, evaluate, and help validate new processes and equipment., • Ability to work with engineers to translate experimental processes into repeatable technician-operated procedures., • Experience with machining and fabrication tools such as manual mills, lathes, drill presses, band saws, taps, and related shop equipment is a plus. Benefits The anticipated hourly pay for this role ranges from $30.00 to $45.00. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description About Us : At MaXentric Technologies, we develop high-performance electronics and advanced wireless systems for the defense, medical, and commercial industries. For over 20 years, our engineering teams have focused on problem-solving and innovation to deliver cutting-edge technologies that create a safer, smarter, and more connected world. You will be joining us at a critical and exciting stage as we take our latest generation of complex radio systems from advanced prototypes to scalable, high-quality production. The Role : We are looking for a hands-on New Product Introduction (NPI) Manufacturing Engineer to lead the transition of our advanced radio systems from prototype to production. In this role, you will manage a hybrid manufacturing model: overseeing outsourced sub-assemblies with US-based partners, while designing and scaling our in-house final assembly and testing lines. Because we build highly complex systems in low volumes (10s to 100s of units) across multiple product lines, we need an agile engineer who can build flexible, repeatable processes and bridge the gap between our R&D and production teams. What You Will Do • In-House Assembly Setup: Design the physical layout, workflow, and stations for our in-house final assembly line. Create clear, step-by-step Standard Operating Procedures (SOPs) and build instructions for production technicians., • Drive NPI (High-Mix, Low-Volume): Lead the manufacturing launch across multiple radio product lines, ensuring a smooth transition from prototype to initial production batches., • Design for Manufacturability (DFM): Collaborate with mechanical and electrical engineering teams to review designs and suggest tweaks that simplify assembly, reduce cost, and improve yield., • Collaborative Testing: Partner with our Test Engineering team to seamlessly integrate RF and electronic functional testing into the final assembly process, ensuring every unit meets strict quality standards., • Domestic Supply Chain Management: Identify, evaluate, and manage US-based Contract Manufacturers (CMs) and component suppliers for outsourced sub-assemblies. (Travel is minimal and strictly domestic)., • Tooling & Fixturing: Specify, design, or procure the necessary jigs, fixtures, and tooling required for efficient in-house assembly. What We Are Looking For • Experience: 3+ years of experience in manufacturing engineering, specifically in an NPI capacity for complex electronics, hardware, or RF systems., • Agile Manufacturing: Proven experience in a high-mix, low-volume (HMLV) manufacturing environment. You know how to build flexible processes that can adapt to different product lines., • Technical Chops: Strong understanding of electro-mechanical assembly, PCBA manufacturing processes, and hardware integration., • Vendor Management: Experience working with domestic suppliers, machine shops, and contract manufacturers., • Cross-Functional Teamwork: A track record of working collaboratively with R&D, Test Engineers, and floor technicians., • Tooling: Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for designing basic assembly fixtures and tooling., • RF Familiarity (Bonus): Familiarity working around radio frequency (RF) products or wireless communications hardware is highly preferred. NOTE: Due to the nature of our military work, U.S. Citizenship or Permanent Residency is required for this position. Compensation & Benefits • Good Faith Pay Range: $75,000 – $130,000 per year. This range represents the good faith estimate of the salary MaXentric reasonably expects to pay for this position upon hire. Final compensation will be based on the candidate's specific skills, experience, and geographic location., • Total Compensation: This role is eligible for Annual Performance Bonuses, • Phantom Stock options, • Health & Wellness: Comprehensive Medical, Dental, and Vision insurance, • Retirement: 401(k) plan, • Time Off: 152 hours of PTO per year, which includes the California-compliant sick leave MaXentric Technologies LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on job-related qualifications without regard to race, color, religion, sex, age, marital status, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: Know Your Rights: Workplace Discrimination is Illegal https://www.eeoc.gov/know-your-rights-workplace-discrimination-illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. This contact information is for accommodation requests only, not to inquire about the status of applications. California Fair Chance Act: MaXentric Technologies will consider for employment qualified applicants with arrest and conviction records in a manner consistent with the requirements of the California Fair Chance Act. No inquiries into criminal history will be made until after a conditional offer of employment. MaXentric is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer \nCompany Description MaXentric Technologies researches, develops, and manufactures next generation electronic solutions for defense, medical, and commercial industries. Founded in 2003 as a research and development company, MaXentric has spent 20 years developing innovative products and services through a research-focused collaborative lab environment. MaXentric’s talented engineering, sales, and support teams ensure the highest quality standards in software and hardware throughout every phase of production across all four of our US locations. MaXentric Technologies researches, develops, and manufactures next generation electronic solutions for defense, medical, and commercial industries. Founded in 2003 as a research and development company, MaXentric has spent 20 years developing innovative products and services through a research-focused collaborative lab environment. \n\nMaXentric’s talented engineering, sales, and support teams ensure the highest quality standards in software and hardware throughout every phase of production across all four of our US locations.

Job Description Rock West Composites, Inc. has an exciting opportunity for a CNC Machinist. We have openings on 1st and 2nd shift. Rock West Composites, Inc. is an engineering and manufacturing company dedicated to providing innovative solutions for commercial and government customers. This position is located in our San Diego, CA 92154 location and reports to the Director of Manufacturing. Position Summary: Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Essential Responsibilities: • Highly skilled in advanced setup and operation of 3, 4 and 5-axis CNC Mill Machines, • Loads the program into the CNC machine, selects and sets up tools, loads stock, and runs the program., • Plans machining by reading work orders, blueprints, engineering plans, materials, specifications, drawings, reference plans, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)., • Uploads programs (mills and lathes) by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs., • Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; Loads feed mechanism by lifting stock into position., • Verifies settings by measuring positions, first-run part, and sample work pieces, • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Maintains safe operations by adhering to safety procedures and regulations., • Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs., • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs., • Documents actions by completing production and quality logs., • Updates job knowledge by participating in educational opportunities; reading technical publications., • Special Assignments may include hands on composite, metal fabrication and assembly, • Daily interface with Manufacturing Managers and Program Manager to establish clear lines of communication and provide task status Basic Qualifications & Education: • Minimum of 8 years experience setting up and operating CNC machines; 3, 4 and 5 axis mill machines., • Mechanically able to assemble and disassemble parts and assemblies, • Excellent working knowledge of composites a huge PLUS, • Self-starter with excellent time management skills and ability to establish objectives and specify the strategies and actions to achieve these objectives, • Experience with contact and non-contact inspection methods, • Organized, self-motivated, strong attention to detail and high level of accuracy, • Ability to manage multiple duties, set priorities and follow tasks through completion, • Capable of working in an environment in which demands and priorities change, • Processing techniques such as wet lay-up, mold and fixture design, inspection methods, and infusion preferred, • High School diploma or equivalent, • US. Person under 22 CFR 120 (due to ITAR Restrictions) Perks and Benefits: • 100% Employer Paid Medical and Dental, • Annual Bonus, • 401K - 5% match, • Employee Stocks Option Program, • 9/80 work schedule, • 8- paid Holidays, • PTO: Maximum 4-weeks after 5 years of employment, • $2,500 tuition reimbursement Compensation: The hourly range for this position falls within $30-$42. The final compensation will be determined based on experience, skillset, and other factors permitted by law. Why should you want to work with us? Rock West Composites cares about our employees! Not only do we offer great benefits to our full-time employees (Medical & Dental 100% employer paid, Vision, Paid Time Off and 401K match), we offer a fun and friendly working environment! Rock West Composites is an Equal Opportunity Employer. It is the policy of the company to provide equal opportunity for all employees and applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. Certain positions require meeting the U.S. Person definition in 22 CFR 120.62. ITAR Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder) as defined by 8 U.S.C. 1101(a)(20), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, Must be authorized to work in the U.S. without the company’s immigration sponsorship now or in the future. Rock West Composites will not offer immigration sponsorship for this position. Rock West Composites will not seek an export authorization for this role. Rock West Composites maintains a Drug and Alcohol-Free Workplace. Depending on state law and the nature of the position, candidates who receive a conditional offer of employment may be required to complete a drug screening. Rock West Composites may also conduct drug and alcohol testing based on reasonable suspicion, post-incident, or for safety-sensitive positions as permitted by law. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact 858-537-6260.

Job Description POSITION DESCRIPTION: The Senior Manufacturing Engineer will contribute to the development, implementation, and maintenance of manufacturing processes to meet company targets for quality, performance, and cost. They will be a subject matter expert and support the activities of the Manufacturing Engineering department to ensure business and customer needs are met. Provides insight to Argen leadership about improving manufacturing processes and efficiency. Help to identify new technologies while driving improvement initiatives, optimize production operations, and foster a collaborative and innovative work environment. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Maintains operational readiness of manufacturing equipment, works with the manufacturing team to resolve issues, and spends significant time walking and working on the manufacturing floor., • Evaluates manufacturing processes and equipment to identify areas of improvement while actively assisting with production processes., • Engages directly in operations to ensure efficiency, quality, and safety compliance., • Contribute to all aspects of manufacturing engineering including project execution, goal alignment, planning, and mentoring employees., • Manages manufacturing engineering projects including creating project plans, setting milestones, and troubleshooting problems., • Provide guidance, support, and mentoring to ensure professional growth and development of junior team members. Foster a culture of collaboration and innovation within the team., • Identify opportunities for process optimization, efficiency improvements, and cost reduction in manufacturing operations. Lead and support process improvement projects to enhance productivity and product quality., • Collaborate with product development & manufacturing teams to ensure seamless introduction of new products into the manufacturing process. Provide expertise on design for manufacturability and assembly (DFMA) to optimize production processes and assure process capabilities., • Develop and optimize production schedules to meet customer demands and delivery timelines. Coordinate with production supervisors and planners to ensure efficient workflow., • Oversee and be accountable for the development and implementation of manufacturing processes to maintain product functionality and cost efficiency and writes associated SOPs., • Promote and maintain a culture of safety excellence. Ensure compliance with all health and safety regulations and promote continuous improvement in safety practices., • Maintain accurate and up-to-date documentation of manufacturing processes, standard operating procedures (SOPs), work instructions (WIs) and engineering changes. Prepare regular reports on key performance indicators (KPIs) for management review., • Applies engineering knowledge and experience to manufacturing, development, and quality standards for strategic projects., • Develops and improves manufacturing processes including CNC machining, 3D printing, robotics, molding, milling, finishing, cleaning and packaging. Familiarity with Solidworks, AutoDesk, MillBox, and/or other CAD/CAM and CNC type softwares., • Solves complex design and product performance issues to drive continuous improvement as well as new process development., • Manages the writing and execution of test protocols and reports for Installation, Operational and Performance Qualifications (IQ, OQ, PQ)., • Reviews, evaluates and implements engineering changes to meet specification requirements., • Ensures continuous improvement of current products and confirms new products meet all company and customer requirements., • Able to delegate tasks when required and help creates and reinforces a culture of teamwork., • Be a subject matter expert in multiple technical areas, exhibiting leadership and mentoring skills, with the ability to inspire and motivate a diverse workforce., • Other duties as assigned. EXPERIENCE & QUALIFICATIONS: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field, or equivalent combination of training, education, and experience. Master's degree preferred., • 8+ years of experience in manufacturing engineering or related roles within the manufacturing industry, including 3-5 years of people and/or project management experience., • Hands-on experience in high precision machining, automated works cells, and their integration with manufacturing master software., • Proficiency in computer-aided design (CAD) software (Solidworks), manufacturing software tools, and statistical analysis package (MiniTab/JMP)., • In-depth knowledge of manufacturing processes, Lean Manufacturing principles, Six Sigma methodologies, and real-time application of process improvements., • Proven ability to lead root cause analysis, problem-solving, and process optimization to improve manufacturing efficiency and quality., • Experience in a hands-on manufacturing environment, with direct involvement in production processes and the ability to work on the manufacturing floor for extended periods., • Strong project management skills, with the ability to manage multiple projects simultaneously and drive new product development., • Advanced knowledge of control procedures, such as Change Management, Standard Operating Procedures (SOPs), and Quality Management Systems (QMS)., • Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams and senior management., • Knowledge of cGMP regulations ISO 13485, 21CFR Part 820, CMDR SOR/98-282, 93/42/EEC, RDC 16 2013, MHLW MO 169 and TG(MD)R Sch3 preferred. Our Awesome Benefits! • Medical, dental and vision Plans, • 401k with Employer Match, • PTO, • Employee Events, • Wellness Programs, • Discounts for home, travel, entertainment and relaxation! About Us At Argen, we’re in the business of creating healthy, confident smiles one case at a time. We are 500 team members strong. Founded more than 50 years ago as a precious metals company in South Africa, Argen has grown to become the largest dental zirconia manufacturer in North America, largest dental alloy provider worldwide, and leader in digital dentistry solutions with diverse product offerings. Our 140,000 square foot manufacturing center houses more than 150 3D printing and milling machines and operates six days a week. Argen embodies a culture of innovation, continuous improvement, and LEAN practices in support of our mission to help our dental laboratory customers succeed.

Job DescriptionJob Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. located in San Diego, CA shipyard related subcontractor looking to hire an Outside Machinist. Job SummarySupport tank cleaning and flushing operations onboard Navy ships by performing mechanical disassembly, assembly, and adjustment of piping systems and related equipment. Duties include opening/closing systems, removing and reinstalling valves, fittings, and pumps, aligning equipment, performing leak checks, and assisting with line-ups for flushing operations. Work requires use of hand tools and measuring devices, following technical manuals and blueprints, and complying with all Health, Safety, and Environmental policies and procedures.RequirementKnowledge of methods and standards of the machinist tradeStrong understanding and interpretation of blueprints, sketches, or other description of parts to be fabricatedTrain, instruct, and supervise the workforce so that each employee puts in their best effort while increasing efficiency, productivity, and output of excellent work product.Strong leadership and customer service skills.Shipyard/industrial skills preferred. Familiar with Navy Ships configurationKnowledge of supervisory techniques, personnel policies, and proceduresFamiliar with Wafs and Tag Out process.Must be able to perform according to both commercial and military standards and specifications Demonstrate excellent verbal and written communication skills. Qualifications:2+ years or more of experience Demonstrate knowledge and utilization of production quality processes, methods, technology, and equipment. Self- motivated, proactive with strong interpersonal skills and good oral and written communication skills, ability to write reports and conduct small briefings for workers under their commandPossess knowledge in Navy Ship Repair workload departments such as: Tank Cleaning and Technical Flush. Other areas of Naval Ships expertise will be considered. Education Requirements:High school diploma Working Conditions and Physical Demands:Work is conducted indoors and outdoors frequently exposed to prevailing weather conditions. Work indoor or aboard vessel which may have fumes, chemicals, and heat as well as noise and dust present depending upon the location of work. Safety equipment required; some will be provided. The individual must be able to frequently climb inclined stairways vertically. Work aboard the vessels can be strenuous and sometimes hazardous. Dynamic, fast-paced outdoor setting with moderate to loud noise levels from production activity in the shipyard. Must be able to stand and walk for long periods of time. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that may be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: MUST provide us with a resumeIf all requirements listed above are not provided your application will not be considered.Please respond to this ad on our website: https://sbsbtc.applicantpro.com/jobs/ Women, veterans, and their spouses are encouraged to apply.We are an Equal Opportunity Employer. EEO/AA M/F D/VJob Type: Full-time Job Posted by ApplicantPro

Job Description The Territory Sales Manager – Off Premise will be responsible for in account field level execution with excellence and provide channel expertise. The Territory Sales Manager will manage resources (POS & local budget) and support consumer events and drive brand visibility for the MJUS brand portfolio for the off- premise. This role requires strong communication and influencing skills, and ability to deliver brand education to accounts. The Territory Sales Manager is responsible for proactively managing distributor partners, planning/programming and problem-solving associated with the MJUS brand portfolio. A strong passion for the off- premise is essential for success in this role. This role will be in the market 80 – 95% (5 days a week in market on average, 2 admin days per month). Principal Duties and Responsibilities: Sales and Commercial Execution • Develops local commercial solutions to improve brand execution and image in market – includes: proper distribution of MJUS brands by type and size, merchandising programs, shelf management positions, drink features and promotions., • Ensures excellent retail execution is being achieved in key accounts., • Builds Jägermeister and Teremana business in their market according to channel and brand standards with best in class execution., • Contributes to new ideas and solutions for distributors and retailers in the territory., • Understands pricing, profit and brand economics at account level. Maintains Visible, On-going Relationships with Accounts • Strategically grows sales volume in key designated market area (DMA)., • Identifies key accounts/opinion leaders/influencers within the channel and occasion strategies., • Conducts staff trainings and tastings in accounts., • Capitalizes on local trends within designated market to inspire future programming., • .Executes Jagermeister brand standards centered around a perfect ice cold shot in accounts., • Executes the defined drink strategies while understanding the ability to flex to account needs to build menus and features. Analysis and Administration • Utilizes tools (iDig, Karma, etc.) to analyze ROI and understand the business (e.g., effectiveness of major events, consumer development activities, key account resource allotments, POS effectiveness, etc.)., • Tracks and monitors Point-Of-Sale. Distributor Engagement • Sets the example and motivates local distributor network to execute commercial brand and channel priorities., • Owns relationships with local Distributors at the account level., • “Be the voice of the brand” promotes and educates history and production of MJUS Brand Portfolio to consumers, accounts, and distributors. Requirements • 3– 5 years of experience in Sales or Marketing, preferably in the spirits and/or beverage industry, or any equivalent combination of related education and experience; College degree preferred, • Strong relationship building skills and collaborative spirit, • Strong customer service, interpersonal and communication skills (both written and oral), • Proven success in formulating account strategies and execute against them to drive results, • Willingness to learn selling the Jagermeister way, • Detail oriented and organized; excellent time management skills and ability to multi-task and support numerous projects, • Well-developed influence and negotiation skills; persistent and persuasive, • Frequent travel within territory required; must have valid driver’s license and vehicle for travel between accounts within assigned territory, • Must have excellent skills in MS Office Suite (Outlook, Excel, Word, and PowerPoint), • Provide hands‑on support of in‑market execution, including POS assembly and setup., • Ability to frequently lift, move, and position product & POS materials weighing up to 25 lbs. Benefits • Highly competitive compensation packages - Range 75k + 15% targeted annual bonus, • Comprehensive medical, dental, and vision insurance, • Matching 401(k) plan, • Yearly wellness stipend (gym membership or fitness classes), • Generous holiday and vacation policy

Job Description Job Title: Engineer Embedded Software 3-NEED US Government Top Secret Clearance. Job Description In this role, you will design, develop, integrate, and test software primarily focused on cryptographic software code bases for end-user customers and businesses. You will be responsible for the design, architecture, development, and administration of embedded and real-time systems. Collaboration with multi-disciplinary teams, including Systems Engineering, Digital Engineering, Hardware, and Integration & Test, will be a key aspect of your work in an Agile software development environment. You will analyze system capabilities to resolve issues related to program intent, output requirements, input data acquisition, programming techniques, and controls. Responsibilities • Design and develop software for embedded and real-time systems., • Integrate and test cryptographic software code bases., • Collaborate with multi-disciplinary teams in an Agile environment., • Analyze system capabilities to resolve technical issues., • Develop and administer software architecture and design., • Participate in the full software lifecycle process from requirements to testing. Essential Skills • Bachelor's degree in Computer Engineering or another STEM discipline with 5 years of related experience, or Master's degree with 3 years, or a PhD with 1 year of experience., • Current active US Government Secret Clearance., • Proficiency in C/C++., • Familiarity with HAIPE, OTNK, and/or IKE., • Experience implementing cryptographic mechanisms using dedicated software libraries., • Experience with Yocto/Petalinux or WindRiver Linux., • Experience with Xilinx platforms (Zynq, Ultrascale+ and VERSAL)., • Experience with TCP/IP and common network configurations., • Proficient in all areas of the formal software lifecycle process from requirements to testing., • Experience integrating low-level firmware and software in complex real-time multi-threaded embedded applications., • Experience with developing and debugging embedded real-time systems., • Experience using Jira/Bitbucket/Git and the Agile software development process., • Ability to work full-time onsite at our Rancho Carmel location. Additional Skills & Qualifications • Foundational knowledge with Rust., • Experience with low-level driver development., • Familiarity with Linux kernel driver development/modifications., • Proficiency working with Linux containers (Docker, Kubernetes, or similar platforms)., • Experience with RESTful Services., • Experience with Software Defined Radios., • Experience with the Avionics Operating System., • Experience with Communication Protocols (I2C, SPI, UART, PCIe, Ethernet)., • Familiarity with Xilinx tools (Vitis, Vivado)., • Familiarity with latest NSA Security Standards., • Familiarity with assembly language., • Familiarity with bare metal embedded device drivers., • Familiarity with PowerPC architectures and peripherals., • Familiarity with IBM tools (Rhapsody, DOORS, Clearcase)., • Familiarity with Green Hills AdaMulti., • Current active US Government Top Secret Clearance., • Current active SAP clearance. Work Environment The role requires full-time onsite work at our Rancho Carmel location. The work environment involves collaboration with multi-disciplinary teams in an Agile software development setting, utilizing advanced technologies and tools such as Jira, Bitbucket, Git, and various Linux platforms. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $70.00 - $110.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description ABOUT TECNADYNE Tecnadyne designs and manufactures subsea propulsion systems in San Diego. We are a small, hands-on team where engineers work side by side with production, purchasing, and quality, and where good ideas move from the whiteboard to the build floor quickly. THE OPPORTUNITY We are looking for an Electrical Engineer III who wants real ownership. In this role you will own electrical subsystems from requirements through release: architecture, schematics, PCB layout, analysis, prototype bring-up, test, and production support. We are in an active cycle of new hardware development, and you will also help sustain proven legacy designs that our customers still rely on. Tecnadyne is a mechanically focused company, and electrical engineering is a critical supporting discipline. The work comes in waves: some weeks are design-heavy at your desk, and others are build weeks on the floor supporting testing, integration, and troubleshooting. This role also works closely with customers, joining technical discussions and supporting them after delivery. If you enjoy being the engineer who designs it, builds it, tests it, documents it, and explains it to the customer, this role is a strong fit. WHAT YOU WILL DO Own the Full Design Cycle • Own electrical subsystems and assemblies end to end, from requirements definition and block-level architecture through schematic capture, PCB layout, and production release, • Design analog, digital, and mixed-signal circuits including motor drives, power distribution, sensor interfaces, embedded control hardware, and communication interfaces such as CAN and RS-485, • Select components, connectors, and materials rated for subsea pressure, temperature, and corrosion requirements, • Iterate designs based on prototype results, test data, and manufacturing feedback Analysis & Validation • Perform power budget, power distribution, thermal, signal integrity, fault protection, and worst-case analyses to verify designs before release, • Use circuit simulation (for example, SPICE) to validate design intent, • Develop and execute test procedures including functional, hipot, and environmental testing, • Write clear test reports, analysis summaries, and technical notes that document design intent and findings Hands-On Build, Test & Troubleshooting • Support prototype and production builds alongside technicians and assemblers on the production floor, • Investigate electrical failures and anomalies on new and existing designs and implement practical corrective actions, • Use oscilloscopes, multimeters, power supplies, and data acquisition systems for bring-up and troubleshooting Systems Integration & Cross-Functional Work • Integrate electrical systems with motors, sensors, wiring harnesses, and mechanical packaging, • Define and manage electrical interfaces (power, signal, communication) between subsystems, • Partner with mechanical engineering on routing, connector access, packaging, and serviceability, • Work directly with production, purchasing, and quality to understand their needs and make designs buildable, sourceable, and inspectable Customer & Technical Support • Participate in and lead customer technical discussions, design reviews, and project status updates, • Provide technical support to customers, primarily remote, with occasional travel (up to 5%), • Translate customer requirements into clear electrical specifications and test plans Documentation, Change Control & Sustaining • Create and maintain schematics, BOMs, wiring harness drawings, and production documentation in Altium Designer, • Initiate and process ECOs, evaluating impact on performance, reliability, safety, cost, and schedule, • Maintain revision control and configuration management for released designs, • Support sustaining work on legacy products, including obsolescence management and board updates Quality & Continuous Improvement • Author and disposition NCMRs and participate in Material Review Board (MRB) activities, • Lead root cause analysis and corrective action on recurring electrical nonconformances, • Contribute to internal electrical design standards, templates, and best practices aligned to IPC standards, • Help mature engineering practices such as ESD control and high-voltage safety through practical, incremental improvements WHAT YOU BRING Required • Bachelor's degree in Electrical Engineering or Computer Engineering, • 5 to 10 years of electrical engineering experience in a manufacturing environment, including demonstrated ownership of at least one subsystem, board, or assembly from concept through production release, • Proficiency in Altium Designer for schematic capture and PCB layout, • Strong analog and digital circuit design fundamentals, • Experience with embedded hardware and sensor integration, • Experience with communication interfaces such as CAN and RS-485, • Hands-on hardware experience: prototype bring-up, lab testing, and troubleshooting on the production floor, not design-only, • Experience designing and building to IPC standards, including IPC-2221, IPC-7351, IPC-A-610, and IPC/WHMA-A-620, • Experience testing hardware to military standards, including MIL-STD-461 and [MIL-STD-810 - confirm], • Experience with ESD control practices and high-voltage safety, • Experience performing power analysis, including power budgets and power distribution, • Strong technical documentation skills, including test reports and design analyses, • Clear, confident communication with customers as well as internal teams, • Comfort working on a small, lean team with cross-functional partners, and the confidence to speak up, share technical recommendations, and ask questions Preferred • Industry experience in subsea, defense, aerospace, or space applications, • Motor design, motor drive, or motor integration experience, • Thermal and high-power analysis experience, including tools such as Ansys, • SPICE modeling experience (for example, LTspice), • Test automation or data analysis using LabVIEW or Python, • Track record of introducing process or documentation improvements in a growing organization HOW SUCCESS IS MEASURED • Electrical deliverables (schematics, layouts, BOMs, harness drawings) released accurately and on schedule, • Analyses confirm designs meet performance and reliability requirements before production release, • Test procedures developed and executed for all new electrical designs, • ECOs initiated and closed on time with full cross-functional coordination, • NCMRs dispositioned accurately and promptly, minimizing production delays, • Measurable reduction in recurring electrical nonconformances through root cause analysis and corrective action, • Electrical designs integrate with mechanical and control subsystems without interface issues WORK ENVIRONMENT & PHYSICAL REQUIREMENTS This is an on-site role that splits time between an office setting and the production floor. The standard schedule is Monday through Friday, 8:00 a.m. to 5:00 p.m. • Frequently sit, stand, walk, use hands to handle or feel, reach, stoop, kneel, crouch, talk, and hear, • Sit for extended periods and use standard office equipment such as a computer and phone, • Handle electrical assemblies and test equipment, and work with energized circuits under established safety practices, including high-voltage testing, • Periodically lift and/or move up to 10 pounds, • Vision requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role. WHAT WE OFFER • Base salary of $120,000 to $150,000 per year, • Employer-paid medical and dental at the base plan level, with Aetna and Kaiser Permanente options, including a $0-deductible HMO plan, • Employer HSA contribution of up to $2,400 per year when enrolled in an HSA-compatible medical plan, • 401(k) with company match: 100% of the first 3% you contribute, plus 50% of the next 2%, • $50,000 employer-paid life insurance; employer-paid disability coverage through MetLife, • Vision coverage through VSP (employee-paid), • Paid time off starting at 2 weeks per year and increasing with tenure, plus 40 hours of sick time and 9 paid holidays, • Real ownership of hardware from design through the build floor, on a team in an active new product development cycle Compensation $120,000 - $150,000; a higher range will be considered for exceptionally qualified candidates. Benefits • 401(k) with match, • Medical and Dental plan, • Flexible benefits plan, • Paid holidays, • Paid sick time, • Paid vacation Tecnadyne is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by federal, state, or local law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act.

Job Description Sheet Metal Mechanic - El Cajon, CA - Immediately Hiring Job Description • This role focuses on precision sheet metal fabrication, including bending, rolling, shearing, punching, and forming to tight tolerances. You will set up and operate a variety of fabrication equipment autonomously, use precision measurement tools to verify dimensions, and produce high-quality parts in accordance with engineering drawings and specifications. Shifts Available 6:00 AM - 4:30 PM (Mon-Thurs) 4:00 PM - 2:30 AM (Mon-Thurs) Responsibilities • Set up and operate sheet metal fabrication equipment, including press brakes, CNC turret punch presses, punch presses, shears, power rollers, seam welders, and related machinery., • Fabricate sheet metal parts by bending, rolling, forming, punching, and welding according to engineering drawings and specifications., • Read and interpret blueprints and drawings to determine dimensions, flat patterns, and fabrication requirements., • Use precision measuring tools, including calipers, gauges, and height gauges, to verify part quality and dimensional accuracy., • Perform machine setups, make adjustments as needed, and maintain quality throughout production runs., • Inspect materials, finished parts, and fabrication processes to ensure compliance with specifications and tolerances., • Complete basic assembly, deburring, and finishing of sheet metal components., • Work safely, maintain an organized work area, and support production needs across departments as required.Essential Skills, • Experience in sheet metal fabrication and forming operations., • Ability to read and interpret blueprints, engineering drawings, and work instructions., • Proficiency using precision measuring tools such as calipers, gauges, and height gauges., • Experience working to tight dimensional tolerances., • Strong troubleshooting, quality inspection, and attention-to-detail skills., • Ability to work independently and in a fast-paced manufacturing environment.Additional Skills & Qualifications, • Experience operating CNC press brakes (Amada, Cincinnati, Durma, Wysong, or similar equipment)., • Experience with roll forming, bump forming, planishing, or seam welding., • Familiarity with deburring, assembly, and finishing processes., • Experience with repetitive production manufacturing and multiple machine setups., • Strong teamwork, communication, and problem-solving skills. Work Environment • The work takes place in a manufacturing and fabrication facility equipped with shear machines, CNC turret punch presses, punch presses, press brakes, power rollers, resistance seam welders, expanders, and related sheet metal tools. Work often involves repetitive production runs, producing batches of approximately 20–30 pieces, with about 2–3 different setups per day depending on production needs. The environment is hands-on and production-focused, requiring regular use of precision measurement tools and close adherence to engineering drawings and dimensional tolerances. You may be assigned tasks both within and outside the sheet metal department based on operational requirements.Job Type & Location This is a Contract to Hire position based out of El Cajon, CA. Pay and Benefits The pay range for this position is $23.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Cajon,CA. Application Deadline This position is anticipated to close on Oct 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionAbout Shift5 Shift5 is building the data platform for onboard operational technology (OT). We deliver cybersecurity, predictive maintenance, and compliance capabilities that enable defense and commercial fleets to operate with greater readiness, resilience, and mission assurance. We are seeking a mission-aligned Mission Operations Specialist to support the installation, configuration, testing, and sustainment of Shift5 solutions across customer platforms. This role sits at the intersection of Field Integration, Hardware & Software Deployment, and Systems Sustainment and will play a critical role in supporting Shift5's next phase of growth. This is an active, field-oriented remote role (based out of San Diego). It requires a desire to get hands-on in the field with customer platforms, technical fluency in hardware and software installation, ownership of field deployment procedures, an ambitious mindset to do whatever it takes, and the relentless drive needed to solve the toughest problems facing our customers. What You'll Do • Install Shift5 hardware, sensors, networking equipment, and cabling on military and commercial platforms in industrial, maritime, rail, or defense environments., • Configure, install, and update software applications, operating systems (Windows/Linux), and system images across customer hardware., • Execute installation procedures, startup checklists, and operational verification tests to ensure system readiness and compliance with Shift5 quality and safety standards., • Travel and deploy into the field to work directly alongside customers and Mission Deployment Engineers, leading on-site integration, upgrades, and preventative maintenance activities., • Troubleshoot basic hardware, software, network, and installation issues on-site, escalating complex technical challenges to Mission Deployment Engineers., • Document installation activities, equipment configurations, and test results while preparing and maintaining deployment kits, tools, and equipment.What We're Looking For Required • Experience in supporting technical equipment, field installations, electronics, networking, IT systems, or related hands-on technologies (1–4 years)., • Proficiency with common hand tools, basic electronic test equipment, Windows operating systems, and basic Ethernet/IP-based communications., • Strong mechanical aptitude, attention to detail, and ability to read basic technical procedures., • Hands-on experience with technical troubleshooting, hardware assembly, software installation, and system testing in field environments., • Comfort operating in dynamic, fast-paced environments, with the ability to lift up to 50 pounds in industrial, maritime, rail, or military settings., • Associate degree, technical certification, military technical training, or equivalent hands-on experience., • Highly self-motivated with a strong bias for action, proactive problem-solving skills, and willingness to travel up to 30% domestically and occasionally internationally., • Security Clearance: Active U.S. security clearance, or the ability and willingness to obtain one. Preferred: • Familiarity with Surface Navy vessels is a plus, with LCS experience., • Military technical experience in electronics, communications, aviation, maritime, maintenance, IT, or related defense fields., • Experience supporting DoD, aerospace, maritime, rail, or industrial customers., • Familiarity with Linux operating systems, multimeters, logic analyzers, wiring diagrams, and installation drawings., • Experience installing ruggedized computers, sensors, or networking equipment on operational platforms.Compensation & Benefits, • Base Salary: $75,000 - $110,000, • Bonus program and equity in a fast-growing startup, • Competitive medical, dental, and vision coverage for employees and their families, • Health Savings Account with annual employer contributions, • Employer-paid Life and Disability Insurance, • Uncapped paid time off policy, • Flexible work & remote work policy, • Tax-deferred public transit benefits with Metro SmartBenefits (DC/MD/VA) We are committed to building an inclusive culture of belonging that embraces the diversity of our people and represents the communities in which we work and the customers we serve. We know the happiest and highest performing teams include people with diverse perspectives and ways of solving problems. We strive to attract and retain talent from all backgrounds and create workplaces where everyone feels empowered to bring their full, authentic selves to work. Shift5 is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identify, national origin, disability, age, marital status, ancestry, projected veteran status, or any other protected group or class. Privacy Policy and Notice for Shift5, Inc. Job Applicants, Employees & Contractors

Job Description We are seeking a Senior Electrical Manufacturing Engineer to lead the industrialization and manufacturing readiness of a generator for our clients next-generation cardiovascular device from design verification through submission and commercial launch. This hands-on role partners closely with R&D while leading manufacturing process development, validation, and design transfer with both internal teams and contract manufacturers. Responsibilities • Develop and optimize manufacturing processes supporting prototype, verification, validation, clinical, and commercial production., • Partner with R&D to incorporate Design for Manufacturability (DFM), Assembly (DFA), Testability (DFT), and Serviceability (DFS)., • Lead Design Transfer, manufacturing readiness, process validation (IQ/OQ/PQ), and production ramp., • Develop manufacturing documentation including work instructions, mBOMs, routings, DMRs, PFMEAs, Control Plans, and process flow documentation., • Develop and validate manufacturing test methods including ICT, AOI, functional testing, firmware loading, calibration, electrical safety testing, and final system testing., • Serve as the primary Manufacturing Engineering liaison with system integration and PCBA contract manufacturers, supporting supplier qualification, engineering builds, process validation, and commercialization., • Drive manufacturing quality and continuous improvement through DOE, statistical analysis, Lean Manufacturing, Six Sigma, root cause investigations, CAPAs, and process optimization., • Collaborate cross-functionally with Engineering, Quality, Regulatory, Operations, Supply Chain, and Program Management to support commercialization milestones. Qualifications • BS/MS in Electrical, Manufacturing, Mechanical, Biomedical Engineering, or related field., • 7+ years of manufacturing engineering experience in regulated medical devices., • Experience commercializing complex capital equipment with high-voltage electronics, embedded software, and PCBAs., • Experience supporting Class III medical devices through Design Verification, Design Transfer, and commercial launch., • Strong knowledge of FDA 21 CFR Part 820, ISO 13485, ISO 14971, IEC 60601-1, IQ/OQ/PQ, PFMEA, DOE, SPC, and Design Controls., • Experience working with contract manufacturers and supplier qualification., • Ability to interpret electrical schematics, PCB assembly, and mechanical drawings., • Startup or fast-paced commercialization experience preferred.

Job Description Applied Composites (AC) is seeking a Manager, Operations who leads and manages the day-to-day activities for our advanced composites production operations. In this role you will lead a team of technicians in a fast-paced, high-precision environment while aligning tasks with company policies and procedures. You will be responsible for ensuring safety, meeting strict on-time delivery schedules, maintaining AS9100 quality standards and driving continuous improvement. About AC: Come and join the Applied Composites team. We are a leading provider of complex composite components, assemblies, engineering and tooling to the aerospace, defense and space system markets. Our employees are treated with respect and given the support, knowledge, and resources they need to thrive. If you are looking for a company that values and develops its employees while offering engaging work, Applied Composites may be the place for you. Job Accountabilities: • Initiates plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials and capital, • Ensures attainment of business objectives, and production schedules while ensuring product standards that meet or exceed our customer’s expectations, • Leads the Production Team in achieving daily tasks, schedules, and goals in areas such as lay-up, vacuum bagging, cleanroom, autoclave/oven curing, winding, machining and assembly to ensure on-time delivery, • Develops a world-class operations organization by providing training, coaching, and counseling, and top grading as appropriate, • Confirms that resources are utilized effectively and drives improvements through Lean Manufacturing principles to eliminate bottlenecks while improving efficiency, • Ensure general safety, compliance with relevant legislation, regulations and company requirements, • Leads and directs work for team of employees as defined by business needs, • Manages staff selection, performance, development and training processes to ensure team competencies and capabilities to reach the business goals and expectations, • Tracks operations hours to budget and ensures proper staffing levels, • Ensures cross-functional collaboration with Engineering, Quality Assurance, Program Management and Supply Chain to resolve issues impacting Production, • Any other duties assigned, and further responsibilities as directed. Education: Bachelor’s degree in Aerospace, Mechanical, Industrial Engineering, Manufacturing Engineering or equivalent combination of relevant education and work experience that will allow successful performance of job expectations Years’ Experience: 7-10 years of relevant experience, ideally in aerospace manufacturing, specifically focused on advanced composite materials Skills: • Solid experience in production engineering, production management, or related activity, ideally in advanced composites, • Experience with and advanced training in Lean manufacturing concepts and techniques with significant exposure to kanban managed supply chain, • Ability to understand and interpret blueprints and engineering specifications, • Ability to identify and resolve technical, operational and organizational problems, • Knowledge of composite manufacturing methods, machining, and mechanical assembly., • Excellent organizational, communication, and interpersonal skills, • Computer proficient, including Microsoft Windows software application as well as basic understanding of Microsoft project., • Position will require interfacing and presenting to both internal and external (customers) parties Benefits: At Applied Composites, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, tuition reimbursement and other developmental opportunities. We are committed to supporting the way you live and work. AC is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware and software solutions designed with the operator in mind and the right amount of engineering rigor? If so – we want to hear from you! This role will support the agile development of innovative communications, networking, and computing solutions for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Fuse is looking for a Senior Mechanical Engineer to support development and deployment of our multi-function network controller (CORE®) and Integrated Systems suite of products. Fuse’s integrated solutions provide a complete suite of warfighting capabilities in a modular, open architecture that combines networking, computing, and communications in a single hardware package. This role will be a critical member of a talented team of engineers that demonstrate superb technical competency, delivering mission critical communications systems and ensuring the highest levels of availability, performance, and security. We’re looking for an experienced mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be an agile, pragmatic, detail- oriented, and mission-driven self-starter. What you’ll do: • Lead a small team of Mechanical Engineers in the planning, design, analysis, and documentation of complex communications devices and integrated systems., • Implement mechanical systems, equipment, and packages for electronics, • Support the design and develop dynamic tactical communications systems, • Generate and review mechanical drawings, • Run advanced simulations on complex mechanical components and assemblies, • Interact with vendors to quote mechanical parts, • Participate in integrated product teams and engineering/design reviews, • Support team members in the preparation of detail design, design testing, and prototype fabrication, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post event reporting, • Define electro-mechanical subsystem requirements and specifications, • Conduct research and analysis of system interface documents in order to define, document, and design system connections and architecture, • Manage workflows and task prioritization for junior Mechanical Engineers across multiple projects Requirements We are looking for: • Bachelor’s degree in Mechanical/Aerospace Engineering and 8-12 years of experience, • Thorough knowledge and understanding of Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience and in-depth understanding of Configuration Management practices with experience with utilizing Solidworks PDM functionality, • Demonstrated experience involving the design of electro-mechanical systems for military applications, • Advanced skills with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine and plating), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental) and MIL-HDBK-516 (Air Worthiness) requirements, • Experience with additive manufacturing processes, • Experience with cable routing and its application in enclosures, • Strong technical, interpersonal, written, and verbal skills, • Ability to operate effectively in a team environment as well as independently, • US Citizen, • Willingness and ability to obtain a secret clearance Your own unique talents! If you meet some requirements of this position but not 100% of the qualifications outlined above, tell us why you’d be a great fit for this role based on your specific characteristics that align with our values and goals Must be a nimble self-starter who is excited about technology and has the ability to think out of the box and suggest powerful new ideas Nice to have: • Experience with commercial and military documentation, • Experience in writing, or contributed to, Environmental Qualification Testing (EQT) test plans and coordinating with test houses to achieve design verification, • Basic EE knowledge including manufacturing processes for CCAs and grounding strategies, • Experience working with production personnel and creating assembly instructions, • EIA-310 cabinet design and familiarity with Navy Environmental Qualification Testing desired, • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Active Secret Clearance Salary Range: $120,000 - $170,000 More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description About Synchron Synchron’s vision is to build non-surgical brain–computer interfaces at global scale that protect the fundamental human rights of freedom of expression and autonomy. Our first mission is to develop motor decoders that restore the ability of 15 million people with paralysis to interact with the digital world. Our second mission is to develop whole-brain cognitive decoders that enable hundreds of millions of people with cognitive decline to preserve and expand their agency as cognition changes over time. In pursuing these goals, we aim not only to help humans flourish, but also to drive fundamental discoveries in human intelligence. Our team operates at the intersection of healthcare and technology, translating breakthrough research into real-world, safety-critical systems. Senior Quality Engineer (Operations) Quality Location: San Diego, CA (On-site)*Please note must be located within commuting distance of San Diego, CA. * Employment Type: Full-Time About the Role As Senior Quality Engineer (Operations), you will serve as the Quality lead supporting Synchron’s manufacturing operations, contract manufacturers, and supplier network to ensure products are manufactured safely, consistently, and in compliance with applicable regulatory requirements. You will partner closely with Manufacturing Engineering, Supply Chain, Operations, and R&D to establish robust manufacturing processes, support design transfer activities, and drive continuous improvement across production operations. You will also assist in the development and implementation of Synchron’s QMS. This is a hands-on role requiring regular engagement on the manufacturing floor, with suppliers, and across cross-functional teams. Key Responsibilities Manufacturing Quality • Serve as the Quality representative supporting manufacturing operations and production readiness., • Develop and maintain manufacturing quality plans, inspection methods, acceptance criteria, and process controls., • Monitor production quality metrics including yield, defects, scrap, and process capability; identify trends and drive continuous improvement., • Support manufacturing investigations related to nonconforming product, deviations, and production issues., • Lead root cause investigations using structured problem-solving methodologies and ensure timely implementation of effective CAPAs., • Support Manufacturing Engineering during implementation of new equipment, tooling, automation, and process improvements., • Up to 20% travel expected, primarily for contract manufacturer visits and supplier audits.Process Validation & Manufacturing Readiness, • Lead or support process validation activities (IQ/OQ/PQ) for manufacturing processes, equipment, software, and inspection systems., • Develop validation protocols, reports, sampling plans, and acceptance criteria., • Support manufacturing process characterization and statistical analysis., • Maintain validated state through periodic review and change assessment., • Participate in pilot builds and production readiness activities supporting commercialization.Supplier & Contract Manufacturer Quality, • Manage quality oversight of suppliers and contract manufacturers., • Conduct supplier qualification, audits, performance monitoring, and quality system assessments., • Review supplier validation documentation, inspection methods, and process controls., • Maintain supplier quality agreements and supplier performance scorecards., • Partner with Supply Chain to resolve supplier quality issues and implement corrective actions.Design Transfer & Change Management, • Partner with R&D and Manufacturing Engineering to ensure successful transfer of new products into production., • Develop Process FMEAs, Control Plans, inspection strategies, and manufacturing quality documentation., • Evaluate manufacturing impact of engineering changes through Change Control processes., • Support Design Reviews with a focus on manufacturability, inspection, process capability, and production scalability.Quality Systems & Compliance, • Author and maintain manufacturing quality documentation including SOPs, Work Instructions, Inspection Procedures, DHRs, Device Master Records (DMRs), and validation documentation., • Support internal audits, supplier audits, FDA inspections, and Notified Body audits., • Ensure manufacturing activities remain compliant with FDA Quality System Regulation, ISO 13485, and applicable international standards., • Support implementation and continuous improvement of Synchron’s Quality Management System.Continuous Improvement, • Drive Lean Manufacturing and Operational Excellence initiatives., • Utilize SPC, capability studies, MSA, Gage R&R, and statistical tools to improve manufacturing performance., • Develop quality metrics and dashboards to support management review., • Champion risk-based decision making throughout manufacturing operations. Required Qualifications • Bachelor’s degree in Mechanical Engineering, Biomedical Engineering, Electrical Engineering, or a related technical/science field, • 7+ years of quality engineering experience in an FDA-regulated medical device environment, with hands-on experience supporting development and manufacturing of mechanical and/or electrical devices, including process validation and control plan development.SES, CERTIFICATIONS Preferred Qualifications • ISO 13485:2016 Lead Auditor Certification (or willingness to obtain); CQE or CQA preferred., • Ability to read engineering drawings, GD&T, and electrical schematics; hands-on experience with electromechanical assembly and inspection, • Lean manufacturing tools (5S, Kaizen, Statistical Process Control, poka-yoke) and applied statistics (sampling plans, MSA/Gage R&R), • Working knowledge of ISO 13485, 21 CFR Part 820, ISO 14971, and applicable product standards (IEC 60601-1, ISO 14708, ISO 10993, IEC 62366), • Supplier quality management experience: auditing, corrective action, and quality agreements, • Strong communicator – able to author clear technical documents and collaborate across R&D, manufacturing, regulatory, and operations, • Ability to work effectively within fast-paced, cross-functional teams with shifting priorities, • 8+ years of medical device quality engineering experience, with 3+ years in a manufacturing environment, • Class III implantable device experience – neuromodulation, vascular, or cardiac rhythm management preferred, • Experience supporting FDA or Notified Body inspections and/or regulatory submissions Compensation The base salary range for this role is $130,000 – $150,000 depending on experience, skills, and qualifications. In addition to base salary, this role may be eligible for discretionary bonuses and/or equity grants, subject to board approval and company policy. Visa Sponsorship We are unable to offer visa sponsorship for this position at this time. Benefits (for W-2, full-time, exempt employees in the US only) *Intern positions not eligible • Subsidized medical and dental insurance coverage for you and your dependent(s), • Life insurance, short-term disability, long-term disability, • 401k, • Discretionary unlimited PTO, • Flexible Spending Account for you and your dependent(s), with eligible plan elections, • Commuter benefits for NY employees Equal Employment Opportunity (EEO) Synchron is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants and provide equal employment opportunities without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, veteran status, or any other characteristic protected by applicable law. If you need a reasonable accommodation during the application or interview process, please let us know. Join Us At Synchron, you will be part of a transformative mission, and you will work alongside driven people who believe in the power of collaboration and innovation to make a lasting impact. If you are excited to stretch your skills and contribute to something meaningful, apply now and build the future with us.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware solutions with the right amount of engineering rigor? Are you seeking a technical role where you can take initiative? If so - we want to hear from you! Fuse is looking for a mid-level Mechanical Engineer to join our team onsite in San Diego, CA. We’re looking for a mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be a pragmatic and mission-driven self-starter. Apply your analytical and detail-oriented mindset to develop, own, and improve Fuse’s products for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Through a collaborative effort with the Electrical, Systems, and Production teams, this role will support Fuse Engineering to build communications, networking, and computing solutions for the warfighter. This is a mid-level role with great potential for growth. Warfighter-focused design and development is at the heart of Fuse processes. Throughout Fuse development our experienced team applies the best practices of commercial design-thinking, coupled to the DoD systems engineering framework. The coupling of commercially proven design with rigorous systems engineering gives Fuse an ability to rapidly design, develop and field solutions well inside of typical military design cycles. Fuse rapidly innovates, putting creative concepts into action and refining those concepts through hands-on testing, user evaluation, and iterations. What you'll do: • Implement mechanical systems, equipment, and packages for customers and internal programs that meet requirements and expectations, • Support, design, and develop dynamic tactical communications systems, • Mechanical design and development for sustaining engineering of our flagship and existing products including dynamic tactical communications systems, • Perform trade studies and participate in equipment selection, • Generate, review, and maintain mechanical drawings, bills of materials (BOMs), work instructions, and releasing of mechanical prints, • Interact with vendors to quote and produce mechanical parts and assemblies, • Participate in engineering/design reviews, • Conduct feasibility studies and testing on new and modified designs, • Support prototype and first article hardware builds, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post-event reporting, • Interpret and research system interface documents in support of designing/defining/documenting how systems will interconnect, • Translate customer requirements into subsystem and system specifications, • Provide on-site and distance operational support, • Limited Travel may be required Requirements • Bachelor’s degree in Mechanical/Aerospace Engineering and 4+ years of experience, • Familiarity with Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine, and plating), • Understanding of additive manufacturing processes and fabrication methods for sheet metal and machined parts, • Understanding of cable routing and its application in enclosures, • Must be a nimble self-starter who is excited about technology and can think out of the box and suggest powerful new ideas, • Experience working with production personnel and creating assembly instructions, • Strong technical, interpersonal, written and verbal skills, • Ability to operate effectively in a team environment as well as independently, • Demonstrate ownership and accountability of product designs, • Ability to obtain US SECRET Clearance, • US Citizen Your own unique talents! If you meet some requirements of this position but not 100% of the qualifications outlined above, tell us why you’d be a great fit for this role based on your specific characteristics that align with our values and goals Nice to have: • Experience with commercial and military documentation, • Experience with presenting technical data to small to medium sized external customer groups (both Technical and programmatic audiences), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental), MIL-HDBK-516 (Air Worthiness), ARINC 404, and/or ARINC 600 requirements, • Basic Electrical Engineering knowledge including manufacturing processes for Circuit Card Assemblies and grounding strategies, • Basic understanding of Configuration Management practices with experience with Solidworks PDM, • Experience with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience in designing routing cable assemblies using software-based tools such as Solidworks Electrical 3D and Schematics., • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Active Secret Clearance More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary: $95,000 - $130,000 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description Join our fast-paced and passionate team as a Mechanical Engineer 4. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Design, develop, analyze, document and support testing of robust, precision opto-mechanical assemblies., • Develop novel laser systems and photonic products for both free space and fiber coupled (single & multimode) outputs., • Perform thermal, structural, and vibration modeling of complex opto-mechanical assemblies., • Design of flexures for precision motion of optical elements., • Engineering analysis to understand how loads and environmental factors affect performance., • Design and setup optical metrology and perform engineering tests and design of experiments., • Work independently and in a team while over communicating with the manager, project engineer and the teammates. Will mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency thru mentorship, curiosity, communication, exposure and initiative. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • A bachelor’s degree in mechanical engineering, Physics, or a related field., • Minimum of 5 years of relevant experience, ideally within a startup or technology company. Skills: • Extensive expertise in various mechanical engineering topics and a solid grasp of the conventional mechanical engineering curriculum., • In-depth knowledge of material properties, manufacturing processes including CNC milling, CNC turning, sheet metal work, injection molding, laser cutting, water jet cutting, and 3D printing (for both metal and plastic)., • Thorough comprehension of design principles for photonic assembly techniques such as die bonding, vacuum reflow soldering, wire bonding, and the use of adhesives., • Strong foundational knowledge of structural theory encompassing static analysis, modal analysis, random vibration, and shock response., • Deep insight into fluid mechanics and heat transfer principles, including conduction, convection, and radiation., • Proven track record of successfully completing engineering tasks utilizing mechanical CAD software (SolidWorks preferred), quantitative analysis and programming tools (such as Python), instrumentation and measurement techniques, component fabrication or procurement, systems integration and testing, as well as data collection, analysis (using ANSYS Workbench), and documentation. Startup Mindset: • You're creative, flexible, and eager to wear multiple hats., • You're passionate about building systems from the ground up and comfortable with ambiguity and change. Benefits The expected annual salary range for this position is $175,000-$225,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job DescriptionPrincipal Electro-Mechanical Build & Test Technician Based in: San Diego, CA | Hourly: $35–$42 (DOE) | Schedule: Full-Time Ready for a Challenge? Picture this: You’re integrating a propulsion assembly. The drawings tell most of the story, but a wiring discrepancy appears mid-build. Do you pause and wait—or dive into the schematic, validate continuity, correct the termination, and retest? If you picked the second path, you’ll feel right at home here. This role is about taking full ownership of complex electro-mechanical products—from hands-on build through integration, test, fault isolation, and delivery. Your Mission • Construct sophisticated electro-mechanical assemblies and integrate complete systems, • Execute mechanical build, cable routing, electrical wiring, and component placement, • Handle motors, actuators, sensors, connectors, and related hardware with care and precision, • Interpret mechanical drawings, electrical schematics, and wiring diagrams to guide work, • Conduct functional tests and confirm performance against acceptance criteria, • Investigate and resolve electrical, mechanical, and system-level faults, • Perform failure analysis and root-cause determination with minimal supervision, • Carry out rework, repair, adjustments, and modifications to meet spec, • Collaborate directly with engineering to eliminate build and production obstacles, • Surface documentation, process, and design issues; recommend actionable improvements, • Own assigned products through build, test, troubleshooting, and final release What Sets You Up for Success, • 5+ years as an electro-mechanical technician (preferred), • End-to-end experience building/integrating/testing/repairing complex equipment, • Blend of mechanical aptitude and practical electrical/electronic debug skills, • Proven independence in diagnosing issues and implementing fixes, • Hands-on familiarity with assemblies, wiring/terminations, motors, actuators, and sensors, • Comfort reading mechanical prints and electrical schematics, • Competence with electrical test equipment and common mechanical measurement tools, • Ability to thrive amid evolving documentation and ambiguous troubleshooting paths, • Uncompromising attention to detail and quality Paths That Point Here Marine/subsea experience is advantageous but not mandatory. We welcome backgrounds in: • Robotics/automation, • Aerospace/defense, • Semiconductor tools, • Industrial machinery, • Prototype & R&D labs, • Complex medical devices, • Field service and equipment repair, • Other low-volume, high-complexity electro-mechanical products How You Operate When a system misfires, your teammates turn to you. You’re energized by root-cause hunts that span mechanical fits, electrical signals, and system interactions—then closing the loop with a verified fix and crisp documentation. Core Competencies • Electrical troubleshooting and mechanical diagnostics, • Precision machine building and assembly, • Soldering and fine rework, • Motor maintenance, repair, and replacement, • Adherence to Manufacturing Instructions (MI) and related build docs, • Knowledge of electrical/electronic architectures, • Mechanical assembly skills, • Repair of mechanical systems/components, • Familiarity with automotive repair/service systems, • Exposure to aerospace manufacturing, • Applied shop mathematics, • Experience in production/manufacturing environments, • Blueprint and drawing reading Tools You’ll Rely On, • 2D drawings and print packages, • Multimeters, • Gear machinery, • Servo motors

Job DescriptionDescription: CNC Lathe Set-Up • 6721 Cobra Way, San Diego, CA 92121, USA, • Full-timeCompany Description Welcome to CoreDux USA, a leading innovator in the machining industry located in the vibrant Sorrento Valley area of San Diego. As a rapidly growing company, we specialize in providing high-precision machining solutions that cater to a wide array of industries, including aerospace, automotive, medical devices, and consumer electronics. Our commitment to quality and excellence has earned us a reputation for delivering exceptional products and services to our clients. At CoreDux USA, we pride ourselves on our state-of-the-art facility, equipped with cutting-edge technology and advanced machinery, enabling us to meet the most demanding project requirements with unparalleled accuracy and efficiency. Our team of skilled professionals is dedicated to pushing the boundaries of innovation and delivering results that exceed expectations. As we continue to expand our operations, we are looking for talented and motivated individuals to join our team. We offer a dynamic work environment that fosters professional growth, collaboration, and creativity. If you're passionate about machining and eager to be part of a company that values innovation and excellence, CoreDux USA is the perfect place for you. Join us on our exciting journey and contribute to shaping the future of the machining industry! Job Description The primary function of this position is to set-up, verify, and operate CNC lathes to machine complex parts to customer requirements. 2nd Shift (1:45pm - 10:15pm) Other responsibilities will include: • Set-up of CNC lathes including calibration of cutting tools and location of work offsets for part production., • Verification of CNC programs and, when required, operation of lathes., • Completion of all applicable paperwork (working to ISO 9000 standards)., • Performance of dimensional and visual inspections for first piece and in-process manufacturing., • Cleanliness of the work area and proper handling of tools, equipment, and stock to prevent damage or loss., • Assist in training other machinists or in supervising machine operators., • Related detail work including de-burring, modification, re-work and assembly, as needed., • May require training in hazardous material handling depending on job assignment., • Perform other duties as requested. Qualifications, • Minimum 5 years CNC job shop experience., • Must work to close tolerances in a high volume environment., • Must be proficient with complicated blueprints and advanced job shop mathematical calculations., • Familiar with CNC programming codes and able to perform complex set-ups for prototype and production runs., • Must be able to follow written instructions and to work with no supervision., • Must be familiar with cutting tool feeds and speeds., • Understanding of true position tolerancing and Cartesian coordinate systems., • Requires frequent bending, reaching and lifting of objects weighing up to 25 lbs. This position is paying between $28-$38 per hour depending on experience. Additional Information All your information will be kept confidential according to EEO guidelines. Diversity, Equity, and Inclusion (DE&I) Statement At CoreDux USA, we are committed to fostering a diverse, equitable, and inclusive workplace. We believe that diversity in our workforce enhances creativity, innovation, and problem-solving. We strive to create an environment where every employee feels valued, respected, and empowered to bring their authentic selves to work. Equal Employment Opportunity (EEO) Statement CoreDux USA is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, citizenship status, age, physical or mental disability, medical condition, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local laws. We are dedicated to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Vision insurance, • Long Term Disability Benefits, • Short Term Disability Benefits, • Paid Time Off, • Company Paid Holidays, • School Visitation Leave, • Leave for Organ / Bone Marrow Donor Diversity, Equity, and Inclusion (DE&I) Statement At CoreDux USA, we are committed to fostering a diverse, equitable, and inclusive workplace. We believe that diversity in our workforce enhances creativity, innovation, and problem-solving. We strive to create an environment where every employee feels valued, respected, and empowered to bring their authentic selves to work. Equal Employment Opportunity (EEO) Statement CoreDux USA is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, citizenship status, age, physical or mental disability, medical condition, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local laws. We are dedicated to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Vision insurance, • Long Term Disability Benefits, • Short Term Disability Benefits, • Paid Time Off, • Birthday Lunches, • Company Paid Holidays, • School Visitation Leave, • Leave for Organ / Bone Marrow Donor Recruiters and Staffing Agencies Thank you for your interest in our job opening, but we are not engaging recruiters for this position and will not respond to recruiter/agency inquiries. Requirements: • Set-up of CNC lathes including calibration of cutting tools and location of work offsets for part production., • Verification of CNC programs and, when required, operation of lathes., • Completion of all applicable paperwork (working to ISO 9000 standards)., • Performance of dimensional and visual inspections for first piece and in-process manufacturing., • Cleanliness of the work area and proper handling of tools, equipment, and stock to prevent damage or loss., • Assist in training other machinists or in supervising machine operators., • Related detail work including de-burring, modification, re-work and assembly, as needed., • May require training in hazardous material handling depending on job assignment., • Perform other duties as requested. Qualifications, • Minimum 5 years CNC job shop experience., • Must work to close tolerances in a high volume environment., • Must be proficient with complicated blueprints and advanced job shop mathematical calculations., • Familiar with CNC programming codes and able to perform complex set-ups for prototype and production runs., • Must be able to follow written instructions and to work with no supervision., • Must be familiar with cutting tool feeds and speeds., • Understanding of true position tolerancing and Cartesian coordinate systems., • Requires frequent bending, reaching and lifting of objects weighing up to 25 lbs.

Job DescriptionJob Title: Process EngineerJob Description The Process Engineer supports and improves manufacturing processes within an electronics production environment. This role focuses on developing and maintaining robust processes, driving continuous improvement, and ensuring efficient and reliable production of electronic assemblies and circuit card assemblies. The Process Engineer collaborates closely with cross-functional teams to support new product introduction, troubleshoot issues, and implement data-driven enhancements to manufacturing operations. Responsibilities • Support manufacturing process improvements to enhance efficiency, quality, and throughput., • Assist with new product introduction (NPI) and process development activities to ensure smooth transition from design to production., • Develop, document, and maintain manufacturing processes for electronic assemblies, PCBAs, and circuit cards., • Create and update clear and accurate work instructions to guide production operators and technicians., • Lead equipment implementation and validation activities to ensure manufacturing tools and SMT machines meet process requirements., • Troubleshoot manufacturing and process issues on SMT lines and micro-electronic production areas to minimize downtime and defects., • Analyze production data to identify trends, variances, and opportunities for process improvement., • Conduct root cause investigations and implement corrective and preventive actions using structured problem-solving methodologies., • Support engineering projects from initiation through completion, ensuring technical requirements and timelines are met., • Partner with production, quality, facilities, and supply chain teams to coordinate process changes and resolve cross-functional issues., • Train operators and production staff on new or revised processes, procedures, and work instructions., • Apply SPC, FMEA, Lean Manufacturing, Six Sigma, 8D, and 5 Why analysis to drive continuous improvement and reduce defects., • Document findings, recommendations, and process changes in a clear and organized manner for ongoing reference and compliance.Essential Skills, • 2+ years of experience in Process Engineering or Manufacturing Engineering within a manufacturing environment., • Hands-on experience working with electronic assemblies, PCBAs, circuit cards, and SMT production lines., • Exposure to SMT, PCBA, circuit card assembly, or electronics manufacturing processes., • Strong troubleshooting skills for identifying and resolving manufacturing and process issues., • Demonstrated process improvement experience in a production environment., • Knowledge of Statistical Process Control (SPC) and its application in monitoring and improving processes., • Experience using FMEA for risk assessment and mitigation in manufacturing processes., • Familiarity with Lean Manufacturing principles and tools to eliminate waste and improve flow., • Understanding of Six Sigma methodologies for reducing variation and improving quality., • Experience applying structured problem-solving methods such as 8D and 5 Why analysis., • Strong analytical and problem-solving skills, with the ability to interpret production data and metrics., • Strong communication skills, with the ability to collaborate effectively with cross-functional teams., • Eligibility to work on ITAR-regulated projects.Additional Skills & Qualifications, • Bachelor’s degree in Engineering preferred., • Experience with SMT machines and micro-electronic manufacturing equipment., • Experience supporting testing and inspection activities for electronic assemblies., • Ability to create clear, concise, and accurate work instructions and process documentation., • Comfort working in fast-paced manufacturing environments with changing priorities., • Ability to train and coach operators on new processes and best practices.Work Environment This role operates in a manufacturing environment focused on electronics production, including SMT lines, PCBA and circuit card assembly, and micro-electronic processes. The Process Engineer works closely with production, quality, facilities, and supply chain teams on the factory floor and in engineering spaces. The environment involves regular interaction with SMT machines, testing and inspection equipment, and other manufacturing tools. Work typically follows standard production hours, with flexibility based on project and operational needs. The setting emphasizes safety, quality, and continuous improvement, with a collaborative culture that supports cross-functional teamwork and ongoing process optimization. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $72000.00 - $90000.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description ASSEMBLER TECHNICIAN - Rancho Bernardo, CA - 1st Shift Job Description • As an assembler, you will build and validate precision opto-mechanical assemblies following detailed procedures. You will utilize standardized tools and electric equipment, such as torque wrenches and pneumatic screwdrivers, to perform mechanical assembly. Your role will involve entering data into company databases and conducting inspections and tests throughout the production process. Responsibilities • Build and validate precision opto-mechanical assemblies according to procedures., • Use standardized tools and electric equipment for mechanical assembly., • Enter data into company databases., • Perform simple standardized inspections/tests during production., • Collaborate with engineers for special builds and experiments., • Work with peers and supervisors to resolve issues., • Operate precision cleaning machinery., • Prepare completed assemblies for shipment., • Recommend procedural improvements to management., • Ensure quality control measures are followed for module production., • Identify and document discrepant material., • Perform other duties as assigned. Essential Skills • Assembly and repair skills., • Proficiency in using hand tools and electric/pneumatic tools., • Ability to read blueprints and engineering drawings., • Strong mechanical aptitude., • Excellent written and verbal communication skills., • Ability to analyze data and report problems effectively., • Experience with MS Word, Excel, PowerPoint, and email systems. Additional Skills & Qualifications • Experience with electro-optical and/or opto-mechanical systems., • Ability to detect visible defects with 20/20 or corrected vision., • Understanding of customer relationship building and service skills., • Experience in environmental testing is desired. Why Work Here? • Join a team that values collaboration and innovation. Benefit from a supportive work environment that encourages continuous learning and professional growth. Enjoy the opportunity to work with cutting-edge technologies in a cleanroom setting. Work Environment • The position involves working on either the first or second shift from Monday to Friday, with comfort in a cleanroom environment essential. Physical demands include sitting, walking, and handling materials, with occasional lifting of up to 20 pounds. The work setting is generally moderate in temperature and noise, with opportunities for occasional travel depending on business needs. Employees are expected to work under deadlines and interact with colleagues across various scenarios. Apply today! Positions are filling quickly. Start your new career in manufacturing now! Job Type & Location This is a Contract position based out of SAN DIEGO, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in SAN DIEGO,CA. Application Deadline This position is anticipated to close on Oct 2, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assembles and/or modifies thru hole and SMT technology electronics circuits, on and not on PCBAs., • Conducts electrical testing of power supplies with the Engineering group on test bench. Performs minor assembly of product or equipment if required., • Works with engineering group to complete required task and activities., • Compiles test data from performed testing and reports and reviews test results with engineers., • Performs Qualification and Design Verification Testing for new and existing products, • Confers with Engineering, and other technical personnel to resolve testing problems such as product or equipment issues, malfunctions, incomplete test data and data interpretation., • Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives and modifies or adjusts equipment to meet specifications., • Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method., • Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization, and quality control. Supervisory Responsibilities This job has no supervisory responsibilities. SALARY RANGE The starting annual base pay for the role is between USD $55,000 and $80,000. The actual base is dependent upon many factors, such as training, transferable skills, work experience, business needs, market demands. The base pay range is subject to change and may be modified in the future. The role may also be eligible for variable bonus programs and benefits. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively after groups of customers or employees of organization. Mathematical Skills Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have knowledge of Microsoft Office Excel Spreadsheet software and Microsoft Office Word Processing software. Certificates, Licenses, Registrations Other Skills and Abilities Must work independent with minimal supervision. Other Qualifications Knowledge of Electronic test techniques and equipment. Knowledge of DC, AC and analog circuits a must. Soldering skills with both thru hole and SMT, on and off PCBAs, and Pb and Pb-free solders. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts and risk of electrical shock. The noise level in the work environment is usually moderate. ABOUT TDK-LAMBDA AMERICAS INC. Acquired by TDK in 2008, TDK-Lambda Americas Inc. represents the culmination of three well-established North American power manufacturers: Electronic Measurements Inc., Lambda Electronics, and Innoveta Technologies. We have earned the reputation of being a trusted world-class organization through a history of providing reliable and innovative power supplies. Our broad product offering features over 6,000 models that are suited for many applications, including medical, industrial, broadcast, defense, factory automation, and LED/LCD signage. Our view is that "power supply" is more than just an electronic device, but the heart of our customer's systems. This belief has helped us become a global leader in our industry. We employ approximately 300 people in our engineering, manufacturing, and sales offices across the United States. At our company, we value the work and ideas of our employees. They are encouraged to express their opinions and take the initiative, which has helped with the growth of our community and kept us at the cutting edge of new technologies. We offer our employees not only a career opportunity but also an environment that allows them to succeed. TDK-Lambda Americas offers great benefits and perks, including healthcare benefits, a 401(k) with match, paid time off (PTO), educational assistance, recognition plans, service awards, and performance-based awards. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. TDK-Lambda Americas is an Equal Opportunity, Affirmative Action Employer and is committed to the full inclusion of all qualified individuals. In keeping with that commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations to perform the essential functions of the position.

Job Description Join our fast-paced and passionate team as a Photonics Engineer 2 Components focused on the design, development, and qualification of advanced photonic components used in high-performance optical systems. As we scale, you will be instrumental in building our manufacturing foundation from the ground up. This is a dynamic, hands-on role for a highly self-directed engineer who thrives in an ambiguous, fast-moving environment. This role requires a strong background in optics, photonics packaging, and precision opto-mechanical integration. The engineer will work closely with manufacturing, reliability, and supply chain teams to transition designs from prototype through high-volume production. The position reports to the Director of Photonics Components. Key Responsibilities include: Component Design & Development • Design and develop photonic components including but not limited to:, • Optical isolators, • Optical switches, • High-power fiber optic connectors, • Packaged acousto-optic modulators, • Perform optical design and modeling of free-space and fiber-coupled optical systems., • Develop opto-mechanical architectures for stable and repeatable optical alignment., • Select and integrate key optical elements including lenses, crystals, fibers, polarizers, and coatings., • Conduct optical tolerance analysis and performance modeling. Optical Packaging & Integration • Design precision photonic packaging solutions including:, • Fiber coupling assemblies, • Optical benches and mounts, • Thermal management structures, • Implement alignment strategies such as active alignment, passive alignment, welding, soldering, and adhesive bonding., • Develop automated or semi-automated assembly processes. Testing & Characterization • Build and characterize optical test setups for component validation., • Measure key optical parameters including:, • Insertion loss, • Isolation, • Return loss, • Power handling capability, • Switching speed, • Thermal stability, • Perform environmental testing and analyze performance over temperature, vibration, and lifetime conditions. Reliability & Failure Analysis • Support component reliability qualification and accelerated life testing., • Investigate optical performance degradation and failure modes., • Conduct root cause analysis and implement corrective actions., • Contribute to reliability models for materials, adhesives, fibers, and optical assemblies. Cross-Functional Collaboration • Work closely with:, • Mechanical engineering, • Manufacturing engineering, • Supply chain, • Quality and reliability teams, • Support design transfer into manufacturing and production ramp., • Interface with external suppliers for custom optical components and materials. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • BS, MS, or PhD in Optical Engineering, Physics, Electrical Engineering, or related field., • 2–5+ years of experience developing photonic or optical hardware., • Experience designing or integrating optical components and assemblies., • Hands-on laboratory experience with optical alignment and characterization., • Familiarity with optical modeling tools such as Zemax, Code V, or equivalent., • Experience with precision opto-mechanical design and packaging. Startup Mindset: • Comfortable operating in an evolving environment with changing priorities, • Motivated by building new capabilities and infrastructure from the ground up, • Willing to take ownership across multiple technical domains, • Hands-on and resourceful, with a strong bias toward execution Benefits The expected annual salary range for this position is $85,000-$125,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Join our fast-paced and passionate team as a Photonics Engineer 3 Components dedicated to the design, development, and evaluation of sophisticated photonic components utilized in high-performance optical systems. As we scale, you will be instrumental in building our manufacturing foundation from the ground up. This is a dynamic, hands-on role for a highly self-directed engineer who thrives in an ambiguous, fast-moving environment. This position necessitates a solid foundation in optics, photonics packaging, and precise opto-mechanical integration. The engineer will collaborate closely with manufacturing, reliability, and supply chain teams to facilitate the transition of designs from prototype stage to high-volume production. Key responsibilities include: Component Design & Development • Design and create photonic components, which include, but are not limited to:, • Optical isolators, • Optical switches, • High-power fiber optic connectors, • Packaged acousto-optic modulators, • Conduct optical design and modeling for both free-space and fiber-coupled optical systems., • Develop opto-mechanical designs to ensure stable and consistent optical alignment., • Choose and integrate essential optical components such as lenses, crystals, fibers, polarizers, and coatings., • Perform optical tolerance assessments and conduct performance modeling. Optical Packaging & Integration • Design high-precision photonic packaging solutions that encompass:, • Fiber coupling assemblies, • Optical benches and mounts, • Thermal management structures, • Implement alignment methods, including active alignment, passive alignment, welding, soldering, and adhesive bonding., • Develop automated or semi-automated assembly procedures. Testing & Characterization • Establish and characterize optical testing setups for component validation., • Measure critical optical parameters such as:, • Insertion loss, • Isolation, • Return loss, • Power handling capacity, • Switching speed, • Thermal stability, • Conduct environmental testing and evaluate performance under various temperature, vibration, and lifespan conditions. Reliability & Failure Analysis • Assist with component reliability qualification and conduct accelerated life testing., • Examine optical performance degradation and investigate failure modes., • Carry out root cause analyses and implement corrective measures., • Contribute to reliability modeling for materials, adhesives, fibers, and optical assemblies. Cross-Functional Collaboration • Collaborate closely with:, • Mechanical engineering, • Manufacturing engineering, • Supply chain, • Quality and reliability teams, • Support the transition of designs into manufacturing and the scaling of production., • Engage with external suppliers for specialized optical components and materials. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • BS, MS, or PhD in Optical Engineering, Physics, Electrical Engineering, or related field., • 5–10+ years of experience developing photonic or optical hardware., • Experience designing or integrating optical components and assemblies., • Hands-on laboratory experience with optical alignment and characterization., • Familiarity with optical modeling tools such as Zemax, Code V, or equivalent., • Experience with precision opto-mechanical design and packaging. Startup Mindset: • Comfortable operating in an evolving environment with changing priorities, • Motivated by building new capabilities and infrastructure from the ground up, • Willing to take ownership across multiple technical domains, • Hands-on and resourceful, with a strong bias toward execution Benefits The expected annual salary range for this position is $125,000-$175,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Join our fast-paced and passionate team as a Quantum Photonics Modules Project Engineer 4. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Build and maintain integrated project plans, phase-gate deliverables, and budgets; drive milestones to completion and escalate early when the critical path is at risk., • Lead cross-functional teams spanning optical, mechanical, electrical, process, test, quality, and supply chain — largely without direct authority — aligning priorities and resolving competing constraints., • Run design reviews, gate reviews, and technical problem-solving sessions; drive decisions to closure and document the rationale., • Embed DfX — manufacturability, assembly, test, reliability, and cost — into design decisions from the concept phase forward., • Drive design and process changes that improve first-pass yield, cycle time, and unit cost, and own the business case behind each., • Develop and manage supplier relationships for critical photonic and optomechanical components; drive qualification, second-sourcing, and cost reduction., • Track project progress, generate status reports, and communicate updates to management and stakeholders, • Drive continuous improvement initiatives to optimize project execution and module performance, • Report program status, metrics, and decisions to engineering leadership and executive stakeholders. Requirements • MS or PhD. degree in Optical Engineering, Photonics Engineering, Physics, or related technical field, • Typically, 5+ years of engineering or project management experience within photonics, optoelectronics, or related industries, • Demonstrated ownership of at least one photonic or optoelectronic product taken from prototype through qualification and into sustained high-volume production., • Hands-on DfX experience — DFM, DFA, DFT, DFR, and design-to-cost — applied to photonic or optomechanical packaging., • Working knowledge of photonic module integration across optical, mechanical, and electrical domains., • Track record leading cross-functional programs with multiple stakeholders, managing schedule, budgets, and resources., • Experience identifying and mitigating technical risk in a development environment. Startup Mindset: • You're creative, flexible, and eager to wear multiple hats., • You're passionate about building systems from the ground up and comfortable with ambiguity and change. This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Benefits The expected annual salary range for this position is $175,000-$225,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Sheet Metal Mechanic $23-$35/hr - El Cajon, 92020 2nd shift Mon-Thurs 4pm-2:30am wknd fri-sun 5am-5:30pm Job Description This weekend sheet metal mechanic role focuses on operating and setting up a variety of sheet metal fabrication equipment to produce precision parts to tight tolerances. You will work with rollers, press brakes, and other machinery to bend, roll, and form sheet metal components according to engineering drawings, using precision measurement tools to ensure consistent quality. Responsibilities • Operate rollers and related equipment to perform sheet metal bending, rolling, planishing, roll forming, and bump forming to tight tolerances (down to approximately 0.030 inches)., • Set up machines autonomously, including shear, CNC turret punch press, punch press, press brake, power shear, power roller, expander, and resistance seam welder., • Fabricate sheet metal parts and assemblies to dimensional tolerances specified in engineering drawings., • Use precision measurement tools such as calipers, combo squares, gauges, height gauges, pi tapes, and other instruments to verify dimensions and ensure quality., • Figure shear sizes and flat pattern layouts from engineering drawings using height gauges and other precision instruments., • Perform shearing, punching, forming, and deburring operations as required for each job., • Set up and run equipment to form bellows and complete assembly tasks as needed., • Check all operations from material gauge and type through shearing, punching, forming, and final inspection to ensure compliance with specifications., • Work independently and collaboratively to develop guidelines and best practices for the production of sheet metal assemblies., • Perform spot welding and roll welding operations as required by the job., • Be willing to work at assigned jobs both within and outside the sheet metal department, supporting other tasks as needed., • Handle repetitive production runs, producing batches of parts and adjusting setups 2–3 times per day or as production needs change. Essential Skills • Hands-on experience in sheet metal fabrication, including bending, rolling, and forming operations., • Proficiency in setting up and running shear, CNC turret punch press, punch press, press brake, power shear, power roller, expander, and related equipment., • Ability to operate and adjust CNC press brakes and brake presses from manufacturers such as Durma, Wysong, Amada, and Cincinnati or similar equipment., • Strong skills in using precision measurement tools, including calipers, combo squares, gauges, height gauges, pi tapes, and other dimensional inspection tools., • Ability to work to tight tolerances, including experience working with tolerances around 0.030 inches., • Experience with shearing, punching, forming, and deburring sheet metal parts., • Ability to read and interpret engineering drawings and convert them into accurate shear sizes and flat pattern layouts., • Capability to work autonomously in machine setup and operation with minimal supervision., • Attention to detail and commitment to checking all operations from material selection through final forming., • Ability to work both independently and as part of a team in a production environment. Additional Skills & Qualifications • Experience with planishing, roll forming, and bump forming processes., • Familiarity with spot welding, roll welding, and resistance seam welding in a sheet metal environment., • Background in forming bellows and assembling complex sheet metal components., • Comfort working with CNC-controlled equipment and traditional mechanical presses., • Ability to develop and refine production guidelines and processes for sheet metal assemblies., • Flexibility to support tasks outside the core sheet metal department when needed. Why Work Here? You will join a production environment that recognizes the value of skilled trades and rewards precision, reliability, and craftsmanship. The weekend schedule is structured to provide full-time weekly compensation while concentrating hours into three days, offering more flexibility for personal time during the week. You will work with a variety of equipment and processes, providing ongoing opportunities to expand your technical expertise and contribute to continuous improvement in fabrication methods. The culture emphasizes teamwork, independence, and accountability, giving you the space to own your work while collaborating with others to meet production goals. Work Environment This role is based on a first-shift weekend schedule as well as a2nd-shift during the week. The environment is a manufacturing and fabrication setting where you will frequently work with equipment such as shears, CNC turret punch presses, punch presses, press brakes, power shears, power rollers, resistance seam welders, expanders, and related machinery. Work often involves repetitive production runs, typically producing batches of 20–30 pieces with about 2–3 different setups per day, though this can fluctuate based on demand. You will fabricate parts to precise dimensional tolerances from engineering drawings, handle various sheet metal gauges and types, and perform operations from shearing and punching to forming, assembling, and deburring. The role requires comfort in a hands-on industrial environment with standard safety practices and appropriate work attire suitable for a fabrication shop Job Type & Location This is a Contract to Hire position based out of El Cajon, CA 92020. Pay and Benefits The pay range for this position is $23.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Cajon,CA 92020. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.