Production company jobs in Dayton, OhioCreate job alerts

COMPENSATION AND BENEFITS Pediatric Otolaryngology (Ped ENT) • $401,000 New Graduate Salary Guarantee; higher with experience, • Wrvu Production Income-$71.13/rvu, • $50,000 Signing Bonus, • Relocation 100% Costs are Covered, • Federal Student Loan Repayment Program Available, • Employed Opportunity with Freestanding Children's Hospital: Work with caring and dedicated staff committed to Quality!, • Full service and growing Pediatric ENT Program with over 40 Pediatric physician Sub-Specialists on Staff, • Mid-Level Providers to Help in Hospital and Clinic, • Academic Affiliation - Faculty Appointment Available, • Magnet Certified and Level 1 Trauma Center, • Call 1:4; One Weekend a month and One Weekday Typically, • Recent USA Board Eligible or Board Certified, • Must be Fellowship Trained, • General Pediatric ENT, • Metropolitan Setting with Performing Arts, Professional Sports, Great Music, Zoo, Culture and Arts and Amazing Food, • Affordable housing options and lots to choose from, • Dynamic Economy with Multiple Fortune 500 Companies, • Highly regarded Colleges and Universities ABOUT DELTA PHYSICIAN PLACEMENT Delta Physician Placement (DPP), the permanent staffing division of The Delta Companies, identifies qualified physicians, advanced practitioners, allied health, and therapists on behalf of healthcare facilities nationwide. A single point of contact provides direct knowledge of the industry to healthcare providers and facilities. The company has been recognized with several Best of Staffing Awards and Forbes’ Best Professional Recruiting Firm. Visit ___ for more information.

• EARN MORE WITH TUCKER - Drivers average up to $1,750 per week*, • SPEND TIME WHERE IT MATTERS - OTR, Local, + Flex options Join us today and experience the difference at Tucker Freight Lines! • Drivers average $1,300 per week*, • Base pay: $20 - $26 per hour depending on location, • Safety and performance bonuses, • Home daily!, • Day and night shifts available depending on location, • Day Cab trucks, • Operating within a 250-mile radius of Davenport, IA + Dubuque, IA, • Hiring in: Dubuque, IA; Quad Cities, IA; Des Moines, IA; Edgerton, KS, • Drivers average $1,400 per week*, • Base pay: $23 per hour, • Earn an additional $1 per hour in safety and performance bonuses, • Home 3+ nights per week, • 6 AM - 8 AM start times, • Monday - Friday schedule, • Hiring in: Indianapolis, IN + Lockbourne, OH, • Drivers average $1,750 per week*, • Base pay: 47 CPM, • Earn an additional 17 CPM in safety + performance bonuses, • Get home weekly to monthly, depending on location, • Additional pay for weekend availability (Weekend Warrior package), • More than 60% drop + hook, • Primarily operating in the Midwest, • Up to $5,000 driver referral bonus (OTR only), • Equipment: 2024 and newer Freightliners + Kenworths equipped with APUs + upgraded trim packages, • Medical, dental, + vision insurance, • 401(k) with company match, • Health savings account, • Company-paid life insurance, • Paid holidays and time off, • Paid orientation, • $100 clean inspection bonus, • Pet + rider policies There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 2+ years tractor-trailer experience, • No DUIs in the last 5 years

• EARN MORE WITH TUCKER - Drivers average up to $1,750 per week*, • SPEND TIME WHERE IT MATTERS - OTR, Local, + Flex options Join us today and experience the difference at Tucker Freight Lines! • Drivers average $1,300 per week*, • Base pay: $20 - $26 per hour depending on location, • Safety and performance bonuses, • Home daily!, • Day and night shifts available depending on location, • Day Cab trucks, • Operating within a 250-mile radius of Davenport, IA + Dubuque, IA, • Hiring in: Dubuque, IA; Quad Cities, IA; Des Moines, IA; Edgerton, KS, • Drivers average $1,400 per week*, • Base pay: $23 per hour, • Earn an additional $1 per hour in safety and performance bonuses, • Home 3+ nights per week, • 6 AM - 8 AM start times, • Monday - Friday schedule, • Hiring in: Indianapolis, IN + Lockbourne, OH, • Drivers average $1,750 per week*, • Base pay: 47 CPM, • Earn an additional 17 CPM in safety + performance bonuses, • Get home weekly to monthly, depending on location, • Additional pay for weekend availability (Weekend Warrior package), • More than 60% drop + hook, • Primarily operating in the Midwest, • Up to $5,000 driver referral bonus (OTR only), • Equipment: 2024 and newer Freightliners + Kenworths equipped with APUs + upgraded trim packages, • Medical, dental, + vision insurance, • 401(k) with company match, • Health savings account, • Company-paid life insurance, • Paid holidays and time off, • Paid orientation, • $100 clean inspection bonus, • Pet + rider policies There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 2+ years tractor-trailer experience, • No DUIs in the last 5 years

Contrans Flatbed USA is hiring experienced flatbed drivers in the Midwest looking for competitive pay and a favorable schedule with home time EVERY weekend! 100% no-touch freight with most loads pre-loaded and pre-tarped. Regional Truck Driver • Top drivers earn up to $90,000 per year*, • Pay range: $1,400-$2,200 per week, based on location, • NEW $1,500 minimum per week when stipulations are met, • Home every weekend, • Company driver flatbed position, • 100% no touch freight, • Most loads are pre-loaded and pre-tarped, • Health, dental, vision and life insurance; short term disability, • 401k with company match, • Paid vacation and holiday pay, • Paid orientation and training, • Referral program, • $6,000 veteran bonus for qualifying drivers Driver Requirements • Valid Class A CDL, • 12 months recent verifiable CDL A experience, • 6 months+ recent flatbed experience, • SAP drivers not eligible for hire

Hiring CDL-A Drivers • Short Haul drivers earn up to $1,500 per week, • Favorable schedule - Home daily and home weekends! At Contrans, we pride ourselves on being a courageous, safe and stable company that has been in business for over 25 years. We're always on the lookout for individuals to join our dependable crew. If you're passionate about adhering to our high standards of safety and customer service, get in touch with us today. Short Haul • Earn $1,200 $1,500 per week*, • Home daily and home weekends, • Company driver flatbed position, • 100% no touch freight, • Most loads are pre-loaded and pre-tarped, • Detention and layover pay available, • Health, dental, vision and life insurance; short term disability, • 401k with company match, • Paid vacation and holiday pay, • Paid orientation and training, • Referral program, • $6,000 veteran bonus for qualifying drivers

Hiring CDL-A Drivers • Short Haul drivers earn up to $1,500 per week, • Favorable schedule - Home daily and home weekends! At Contrans, we pride ourselves on being a courageous, safe and stable company that has been in business for over 25 years. We're always on the lookout for individuals to join our dependable crew. If you're passionate about adhering to our high standards of safety and customer service, get in touch with us today. Short Haul • Earn $1,200 $1,500 per week*, • Home daily and home weekends, • Company driver flatbed position, • 100% no touch freight, • Most loads are pre-loaded and pre-tarped, • Detention and layover pay available, • Health, dental, vision and life insurance; short term disability, • 401k with company match, • Paid vacation and holiday pay, • Paid orientation and training, • Referral program, • $6,000 veteran bonus for qualifying drivers

Job Overview: The Production Manager will provide leadership and direction to the product group in support of Marvin Window’s business objectives. They manage production goals, ensure effective utilization of resources and materials and improve overall efficiency of operations. The manager facilitates strong communication and connection between all departments and resolves problems pertaining to people, production and products. Relocation Bonus & Benefits at Marvin Join Marvin today and receive relocation incentives once you've relocated for your new role! In addition to relocation support, Marvin offers a comprehensive benefits package: • Health benefits starting on your first day of employment, • Paid time off, • Please note: housing is not provided. Highlights of your role:, • Responsible for developing and implementing plans and objectives relating to production, quality and safety., • Directly manages department/area leadership. Oversees employees in production department and carries responsibility for departmental productivity and goal achievement. Motivates, challenges, and provides feedback to leadership and employees. Addresses complaints and courageously resolves problems that impact the department., • Manages and continually improves policies, procedures and processes to maximize manufacturing efficiencies, quality, safety and customer satisfaction., • Collaborates with cross-functional areas and support groups to initiate or carry out projects or initiatives that support business objectives, • Foster an environment of continuous improvement (CI) including such areas as 5S, autonomous maintenance, lean/sigma, productivity, and quality to facilitate continuous improvement and profit improvement projects as identified., • Primary communicator of information to the whole business team on projects, goals, status reports, business needs and issues and communicate to senior management results and issues as needed., • Prepare and maintain a Product Group budget and report exceptions and variances as required. You're a good fit if you have (or if you can):, • Excellent written and verbal communication skills, • Demonstrated proficiency with Microsoft Office tools including Excel, • Detail-oriented and organized, with attention to accuracy, • Ability to confidentially maintain personal information and understand and respect the nature of sensitive data, • Past experience with Lean manufacturing, ISO and related principles preferred., • Basic knowledge and competence with manufacturing software, MS Office., • Excellent communication and conflict resolution skills Also want to make sure you have:, • Bachelor's degree in a related area from a recognized program or institution is preferred. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities Compensation: $98,000 - $130,670 annually

Job Overview: Are you looking for steady work, a high-energy team and a company that values you and your time? This opportunity is sure to spark your interest! We're looking for a Master Electrician to join us at Marvin. Your typical day will include supporting the Marvin facilities, systems, and equipment including preventive maintenance, consulting on new and existing equipment and facilities, electrical (Intertek/UL) and building code requirements and supporting issues as they arise. You'll get to manage projects while still getting hands-on experience using your skills. This role works Monday through Friday with some after-hours & weekend on-call when necessary. Enjoy working in a clean, safe, temperature-controlled facility with great teams. We provide everything you need to be successful from hands-on training to your tools. We also offer full benefits starting Day 1 and ample paid time off. Besides the perks, we offer an encouraging team environment here at Marvin. This job is located in Warroad, MN. If you're considering relocating to Warroad, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more – in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • Must demonstrate safe work habits and maintain good housekeeping at all times., • Must have an understanding of facility electrical systems., • Display consistent improvement and accuracy in the performance of electrical trade skills., • Working in tight spaces and in awkward positions to run wiring and remove old wiring., • Working at elevations on ladders and aerial lift platforms., • Must be detail oriented and able to read prints/drawings, • Must be able to accurately book hours toward work orders. Enter history comments, look up history on equipment. Locate parts in inventory, enter work orders, and request parts., • Able to understand equipment manuals including proper maintenance, troubleshooting, BOM's, etc., • Effectively communicate customer needs to maintenance, support departments and external customers in a positive manner. Also, able to contact appropriate support resources with questions for assistance., • Must be able to select the proper equipment or tool(s) for the job at hand, • Must be able/willing to attend, learn, and train fellow employees as time and tasks warrant., • Must be able to trouble shoot problems and provide alternative solutions when necessary., • Must flexible and willing to move from job task to job task without hesitation, • Willingness to learn and work in other trade skill areas as needed, • Willingness to be cross trained in multiple departments and job roles. You're a good fit if you have (or if you can):, • Strong mechanical, electrical and programming aptitude and skills, • The ability to read and understand schematics/prints to complete electrical work, • The ability to work well independently with a focus to get things done right, • Excellent troubleshooting skills and the ability to understand facility and production equipment electrical systems., • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm – Drive for results., • Communication and collaboration skills, ability to work cross-functionally Also want to make sure you have: Must possess a current MN Journey Workers or Master Electrical License * Prior experience in electrical work required We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities #LI-AS2 Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at ___. Compensation: $36 - $42 per hour

Job Overview: We’re looking for a strategic, hands‑on Senior Finance Manager to partner closely with the manufacturing leadership teams across four production facilities. In this role, you’ll serve as the primary financial steward for operations, ensuring strong cost discipline, accurate reporting, and forward‑looking insights that help drive performance. You’ll also lead and develop a team of four finance professionals, fostering a culture of accountability, curiosity, and continuous improvement. This position is ideal for someone who thrives in a fast‑paced manufacturing environment and enjoys rolling up their sleeves to understand the business from the shop floor to operations leadership. Our company designs and manufactures high‑quality windows and doors, and your work will directly support the teams that bring those products to life. This job is located in Warroad, MN. If you're considering relocating to Warroad, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more – in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: Financial Leadership & Business Partnership • Serve as the lead finance partner for four manufacturing facilities, providing clear, actionable insights to plant managers and operations leaders., • Lead the monthly operations performance review, including cost per unit reporting, variance analysis, and inventory review reporting., • Drive annual budgeting and periodic forecasting for all supported facilities., • Support capital planning, investment analysis, and post‑implementation reviews for manufacturing projects., • Monitor key performance indicators (KPIs) and operational metrics, identifying trends and recommending corrective actions. Team Leadership • Lead, mentor, and develop a team of four direct reports, ensuring strong performance, engagement, and professional growth., • Establish clear priorities, workflows, and development plans for the team., • Promote a collaborative, high‑accountability culture within the finance function and across operations. Operational Excellence • Partner with manufacturing, supply chain, and engineering teams to improve cost visibility and operational efficiency., • Support continuous improvement initiatives, including lean manufacturing, waste reduction, and productivity enhancements., • Strengthen internal controls related to inventory, production reporting, and financial processes., • Ensure compliance with corporate accounting policies and relevant regulatory requirements. You're a good fit if you have (or if you can):, • Bachelor’s degree in Accounting, Finance, Business, or related field; MBA, CPA, or CMA preferred., • 7–10+ years of progressive finance experience, with at least 4 years supporting manufacturing operations., • Experience leading and developing a team., • Strong understanding of standard costing, inventory accounting, and manufacturing financial processes., • Excellent analytical skills with the ability to translate data into meaningful insights., • Strong communication and relationship‑building skills, with the ability to influence at all levels. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities #LI-CM1 Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at ___. Compensation: $134,000 - $167,000 annually, with bonus eligibility!

Job Overview: Enterprise Quality Manager – Post‑Production leads transformation efforts to improve and sustain the quality of products from the point they leave the manufacturing site through jobsite delivery. This role partners closely with Operations, Logistics, Engineering, and Customer Service to ensure that product condition is protected throughout outbound movement. The position is responsible for building and executing enterprise strategies, establishing performance standards, and driving cross‑functional alignment to eliminate quality losses in this segment of the value stream. This role reports directly to the VP of Quality and serves as a key link between plant teams, distribution and transportation functions, and enterprise leadership. This job is located in Warroad, MN. If you're considering relocating to Warroad, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more – in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • Lead the enterprise strategy for Post‑Production Quality, ensuring products maintain expected quality during loading, transportation, staging, and jobsite delivery., • Establish clear success criteria, KPIs, and milestones for outbound quality performance in partnership with Senior Operations and Logistics Leaders., • Develop and maintain standards, best practices, and process controls that strengthen outbound product protection and reduce quality escapes., • Work closely with Manufacturing, Engineering, Logistics, Transportation, Supply Chain, and Customer Service to design and implement improvements across the outbound value stream., • Provide guidance and support to local and regional teams, ensuring the effective deployment and follow-up of product integrity initiatives., • Coordinate with field teams and customer-facing groups to understand jobsite realities and translate feedback into actionable improvements., • Lead structured investigations for all outbound quality issues; ensure robust root cause analysis and sustainable corrective actions., • Review internal and external quality data—delivery condition, transportation defects, customer feedback, and claims—to identify trends and emerging risks., • Conduct onsite validations at plants, distribution centers, transportation hubs, dealer warehouses and jobsites to verify effectiveness of quality improvements., • Support development and maintenance of enterprise reporting, dashboards, and systems related to post-manufacturing product integrity., • Drive implementation of new processes, tools, technology and standards that protect product condition during loading, securing, transport, and delivery., • Partners with other Enterprise Quality Managers to create a cohesive, end-to-end quality strategy for the enterprise., • Partner with the EPT team to align product integrity improvements with future-state systems., • Prepare and deliver comprehensive updates to Senior Leaders regarding progress, challenges, and resource needs within the product integrity workstream., • Serve as liaison between Plant Leadership, Logistics teams, and FCM Quality to ensure alignment, resolve issues, and sustain improvements. You're a good fit if you have (or if you can):, • B.S. in Engineering, Supply Chain, Operations, Quality Management, or related field is required., • 6+ years of experience in quality, operations, logistics, transportation, or continuous improvement., • Proven leadership of cross-functional initiatives and transformational projects., • Strong understanding of quality systems, structured problem-solving, and operational processes., • Excellent analytical, communication, and problem‑solving skills., • Willingness to travel frequently (up to 50%) to plants, distribution sites, transportation partners, and jobsites. Also want to make sure you have:, • Experience with Lean, Six Sigma, or similar improvement methodologies., • Background in packaging engineering, transportation quality, or outbound logistics., • Expertise in data analysis, quality reporting, and performance management. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities LI- BN1 Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at ___. Compensation: $121,000 to $162,000 annually

pspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifInvest your career with an industry you can bank on…Insurance! Zurich North America is currently looking for an Executive Underwriter OR AVP, Underwriting Director to join our large account contract space. We are looking for someone to work from one of the following major cities/states: Columbus, Indianapolis, Indiana, Iowa, Kansas, Kentucky, Minneapolis, Minnesota, Missouri, Montana, Ohio, Pennsylvania, Schaumburg, or Wisconsin./span/pp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifYour bright ideas and determination will help us drive positive impact with our customers, communities, and each other. Our global footprint and 148 years of experience enables you to develop your skills and put your problem-solving expertise to use while working with a wide range of Fortune 500® companies. /span/pp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifTo bring leading talent into the organization and foster a strongculture of innovation and excellence/strong, we strongencourage professionals from wide range of backgrounds /strongand industries to apply and: /spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serif /span/pul type=discli style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifJoin a strongglobal company/strong that gives you strongempowermen/strongt over your own activities and decisions/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifUse strongyour financial/credit/accounting acumen/strong along with your analytical and customer focus to support our team /span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifHave the strongautonomy/strong and fstrongreedo/strongm to be successful in your career/span/li/ulp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifThis is a highly technical and market facing position and requires experience with Surety lines of business. We are open to hiring talent located within different locations. This position will require approximately 20-25% travel./span/pp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifThis role will be filled at either the Executive Underwriter OR AVP, Underwriting Director- Contract Surety officer level. The hiring manager will determine the appropriate level based upon the selected applicant’s experience and skill set relative to the qualifications listed for this position./span/pp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifThis role is responsible for the following:/span/pp /pul type=discli style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifProduction and underwriting of new and renewal Surety business/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifManaging of a large book of prominent accounts/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifInternal marketing and production within Zurich North America in support of our cross-sell efforts /span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifExecution of the external marketing strategy/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifAdherence to underwriting rules and guidelines, insurance laws, regulations, and the Zurich Way of underwriting/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifEstablish new as well as develop existing agency and broker relationships/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifWorking within limits and authorities on assignments of varying degrees of complexity /span/li/ulpspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serif /span/ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifExecutive Underwriter Basic Qualifications:/span/pp /pul type=discli style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifHigh School Diploma or Equivalent and 5 or more years of experience in the Underwriting, Market Facing, spanFinance, Accounting, or Banking area./span/spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifHigh School Diploma or equivalent and 10 or more years of experience in the claims or underwriting support area/spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifZurich approved Apprenticeship program including an associate degree and 3 or more years of experience in the Underwriting, /spanspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifMarket Facing, spanFinance, Accounting, or Banking area./span/spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifZurich approved Apprenticeship program including an associate degree and 8 or more years of experience in the Claims or Underwriting Support area./span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifKnowledge of Microsoft Office/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifExperience working on time restraints for quotes on new and renewal business./span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifExperience working in a team environment./span/li/ulp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/pp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifAVP, Underwriting Director Qualifications:/span/pp /pul type=discli style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifHigh School Diploma or Equivalent and 7 or more years of experience in the Underwriting, /spanspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifMarket Facing, spanFinance, Accounting, or Banking area./span/spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifHigh School Diploma or Equivalent and 14 or more years of experience in the Claims or Underwriting Support area/spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifZurich Certified Insurance Apprentice including an Associate Degree and 5 or more years in the Underwriting, /spanspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifMarket Facing, spanFinance, Accounting, or Banking area./span/spanbrspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifOR/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifZurich Certified Insurance Apprentice including an Associate Degree and 12 or more years of experience in the Claims or Underwriting Support area/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifExperience with Microsoft Office/span/li/ulpspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serif /span/ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifPreferred Qualifications:/span/pp /pul type=discli style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifBachelor’s Degree /span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifEstablished broker relationships./span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifSales execution mindset/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifCreative problem-solving skills/span/lili style=font-size:12.0pt;font-family:arial, helvetica, sans-serifspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifStrong verbal and written communication skills /span/li/uldiv/divp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifYour pay at Zurich is based on your role, location, skills, and experience. We follow local laws to ensure fair compensation. You may also be eligible for bonuses and merit increases. If your expectations are above the listed range, we still encourage you to apply—your unique background matters to us. The pay range shown is a national average and may vary by location. The combined salary range for this position is $100,000.000- $215,000.00. The proposed salary range for the Executive Underwriter is $100,000.00 - $165,000.00, with Global Specialty Incentive Plan bonus eligibility set at 30%. For the AVP, Underwriting Director is $130,000.00- $215,000.00, with Global Specialty Incentive Plan bonus eligibility set at 40%./span/pp /ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptWe offer competitive pay and comprehensive benefits for employees and their families. [Learn more about Total Rewards a title= href= target=_selfhere/a.]/span/ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptstrong /strong/span/ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptstrongWhy Zurich?/strong/span/ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptAt Zurich, we value your ideas and experience. We offer growth, inclusion, and a supportive environment—so you can help shape the future of insurance. Zurich North America is a leader in risk management, with over 150 years of expertise and coverage across 25+ industries, including 90% of the Fortune 500®./span/pp /ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptJoin us for a brighter future—for yourself and our customers./span/pp /ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptZurich in North America does not discriminate based on race, ethnicity, color, religion, national origin, sex, gender expression, gender identity, genetic information, age, disability, protected veteran status, marital status, sexual orientation, pregnancy or other characteristics protected by applicable law. Equal Opportunity Employer disability/vets./span/pp /ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptZurich complies with 18 U.S. Code § 1033./span/ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptstrong /strong/span/ppspan style=font-family:arial, helvetica, sans-serif;font-size:12.0ptstrongPlease note:/strong Zurich does not accept unsolicited CVs from agencies. Preferred vendors should use our Recruiting Agency Portal./span/pp /ppspan style=font-size:12.0pt;font-family:arial, helvetica, sans-serifLocation(s): AM - Ohio Virtual Office, AM - Columbus, AM - Indianapolis, AM - Indiana Virtual Office, AM - Iowa Virtual Office, AM - Kansas Virtual Office, AM - Kentucky Virtual Office, AM - Minneapolis, AM - Minnesota Virtual Office, AM - Missouri Virtual Office, AM - Montana Virtual Office, AM - Pennsylvania Virtual Office, AM - Schaumburg, AM - Wisconsin Virtual OfficebrRemote Working: YesbrSchedule: Full TimebrEmployment Sponsorship Offered: No br brspan style=color:#ffffffLinkedin Recruiter Tag: #LI-RA1 #LI-ASSOCIATE #LI-REMOTE /span/span/pp /pp /p

Hiring CDL-A Truck Drivers • Earn "The Best Money in Trucking" - Start at 70CPM; up to $2,000/wk, • Sick of Student Pay? - Hit your one year...earn in high gear! It's pretty simple-we're a no-nonsense, no-bull trucking company run by grown-ups. We pay what we say and do everything we can to keep top drivers happy-at home and on the road. Apply today for more details. Company Truck Driver Job Info • Earn up to $90,000 per year (70CPM) and $2,000/week on top weeks. If you bring the time and talent, K&B will bring the freight, pay and equipment to make it happen., • Weekly minimum guaranteed pay as high as $1,610. We have skin in the game to keep you running. If you're giving us time, you're getting paid., • Drive reliable, modern equipment: Freightliner Cascadia refrigerated trailers; tractors with APUs, fridges, inverters and more., • $1,000 sign-on bonus paid with first check, • Competitive insurance benefits - medical, dental, vision, life, • Drop pay, detention pay, layover pay, • Clean inspection, safety, and referral bonuses Driver Requirements • Valid Class A CDL

Hiring CDL-A Truck Drivers • EARN "THE BEST MONEY IN TRUCKING" - Start at 70CPM; min. $1,610/wk guaranteed, • RUN HARD. LIVE HARDER. - Extended miles, extended home time, premium pay It's pretty simple-we're a no-nonsense, no-bull trucking company run by grown-ups. We pay what we say and do everything we can to keep top drivers happy-at home and on the road. Apply today for more details. Road Warrior OTR Job Info • Not for every driver... Only the best. Road Warriors take on the miles others can't. Run long miles, earn big payoffs, and enjoy real rest (up to 20 days) when you're home., • Earn up to $2,000/week on top weeks. With industry-leading base pay (70CPM) and additional accessory pay and bonus incentives, Road Warriors make THE best money in trucking., • $1,610 weekly minimum guaranteed pay. We have skin in the game to keep you running. If you're giving us time, you're getting paid., • Drive reliable, modern equipment: Freightliner Cascadia refrigerated trailers; tractors with APUs, fridges, inverters and more., • $1,000 sign-on bonus paid with first check, • Competitive insurance benefits - medical, dental, vision, life, • Drop pay, detention pay, layover pay, • Clean inspection, safety, and referral bonuses Driver Requirements • Current Class A CDL

Hiring CDL-A Truck Drivers • PAY THAT MOVES YOUR FORWARD - Start at 66-70CPM, • GUARANTEED TO PAY - Weekly minimums from $1,564 It's pretty simple-we're a no-nonsense, no-bull trucking company run by grown-ups. We pay what we say and do everything we can to keep top drivers happy-at home and on the road. Apply today for more details. Midwest Regional Truck Driver Job Overview • Strong pay with real guarantees. Earn 66-70CPM, with top drivers making up to $85,000+ per year. Guaranteed weekly pay starts at $1,518-$1,564, so you're paid even when freight slows., • Big weeks when you want them. On top weeks, drivers earn $1,900-$2,000, depending on job and miles - rewarding drivers who want to run., • Home-time options that fit your goals. Choose weekend home time, bi-weekly home time, or extended time out, depending on your location and the job you select., • Easy freight keeps your wheels turning. Run 100% no-touch freight, with additional pay for drop, detention, and layovers, so your time is respected., • Medical, dental, vision, and life insurance, • Paid time off, • Predictable home time programs, • Freightliner Cascadia equipment, • Tractors equipped with APUs, refrigerators, and inverters Driver Requirements • Valid Class A CDL

The Food Service Worker at Northern Regional Jail supervises inmates to ensure that meal and food items are prepared in accordance with production plans. In this role, you will train workers in methods of performing duties, as well as assign and coordinate work to promote the efficiency of operations. This person is also responsible for the sanitation of the facility and maintaining personal safety, by conforming to all standards and regulations. Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Benefits: Full Health Benefits, 401k*, Vacation/PTO, Holiday Pay, College Tuition Assistance, Free Shift Meals & MORE! Starting Pay: $15/hour $500 RETENTION BONUS (based on performance and attendance) ? Adhere to and maintain preparation and production guidelines according to Aramark standards by reviewing and approving production and temperature logs. ? Supervise inmates in food preparation and tray assembly. ? Ensure timely, efficient meal service and all Aramark guidelines are being met. ? Participate in preparation and serving of meals ? Prints and distribute recipes. ? Direct inmates in the use of Aramark recipes and train on proper cooking procedures. ? Ensure proper portions and any special dietary requirements are fulfilled. ? Obtain accurate daily population counts and review with staff. ? Adhere to security policies and procedures. Ensure storage areas are locked at all times. ? Ensure that all kitchen tools and equipment are returned to their designated secure area. Ensure all keys are returned and secured. ? Determines work procedures, prepares work schedules and sanitation schedules while ensuring that cooks, inmates and/or food service workers adhere to the assigned schedule. ? Assist in conducting inventory, properly receiving, and storing food and food related items. Requisition orders as needed for approval. ? Participates in the preparation/5 P?s (Participation, Pulls, Production, Portion Control, and Postproduction), storage and assembly of meals and food items. ? Follows the Company?s Standard of Operation for food handling and storage. Follows HACCP policies and procedures regarding proper food handling procedures. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Must be over 18 years of age ? Minimum of one (1) year of food prep or related work preferred ? Previous supervisory experience preferred ? Previous experience interacting with inmates a plus ? Ability to motivate and supervise inmates and/or team members to attain quality and quantity of food production in a correctional work environment ? Must be able to obtain a food safety certification ? Ability to work independently with limited supervision ? Ability to exercise good judgment and tact ? Must be able to follow basic safety procedures and policies ? Must qualify for and maintain correctional facility security clearance This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

The Food Service Worker at Northern Regional Jail supervises inmates to ensure that meal and food items are prepared in accordance with production plans. In this role, you will train workers in methods of performing duties, as well as assign and coordinate work to promote the efficiency of operations. This person is also responsible for the sanitation of the facility and maintaining personal safety, by conforming to all standards and regulations. Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Benefits: Full Health Benefits, 401k*, Vacation/PTO, Holiday Pay, College Tuition Assistance, Free Shift Meals & MORE! Starting Pay: $15/hour $500 RETENTION BONUS (based on performance and attendance) ? Adhere to and maintain preparation and production guidelines according to Aramark standards by reviewing and approving production and temperature logs. ? Supervise inmates in food preparation and tray assembly. ? Ensure timely, efficient meal service and all Aramark guidelines are being met. ? Participate in preparation and serving of meals ? Prints and distribute recipes. ? Direct inmates in the use of Aramark recipes and train on proper cooking procedures. ? Ensure proper portions and any special dietary requirements are fulfilled. ? Obtain accurate daily population counts and review with staff. ? Adhere to security policies and procedures. Ensure storage areas are locked at all times. ? Ensure that all kitchen tools and equipment are returned to their designated secure area. Ensure all keys are returned and secured. ? Determines work procedures, prepares work schedules and sanitation schedules while ensuring that cooks, inmates and/or food service workers adhere to the assigned schedule. ? Assist in conducting inventory, properly receiving, and storing food and food related items. Requisition orders as needed for approval. ? Participates in the preparation/5 P?s (Participation, Pulls, Production, Portion Control, and Postproduction), storage and assembly of meals and food items. ? Follows the Company?s Standard of Operation for food handling and storage. Follows HACCP policies and procedures regarding proper food handling procedures. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Must be over 18 years of age ? Minimum of one (1) year of food prep or related work preferred ? Previous supervisory experience preferred ? Previous experience interacting with inmates a plus ? Ability to motivate and supervise inmates and/or team members to attain quality and quantity of food production in a correctional work environment ? Must be able to obtain a food safety certification ? Ability to work independently with limited supervision ? Ability to exercise good judgment and tact ? Must be able to follow basic safety procedures and policies ? Must qualify for and maintain correctional facility security clearance This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

The Food Service Worker at Northern Regional Jail supervises inmates to ensure that meal and food items are prepared in accordance with production plans. In this role, you will train workers in methods of performing duties, as well as assign and coordinate work to promote the efficiency of operations. This person is also responsible for the sanitation of the facility and maintaining personal safety, by conforming to all standards and regulations. Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Benefits: Full Health Benefits, 401k*, Vacation/PTO, Holiday Pay, College Tuition Assistance, Free Shift Meals & MORE! Starting Pay: $15/hour $500 RETENTION BONUS (based on performance and attendance) ? Adhere to and maintain preparation and production guidelines according to Aramark standards by reviewing and approving production and temperature logs. ? Supervise inmates in food preparation and tray assembly. ? Ensure timely, efficient meal service and all Aramark guidelines are being met. ? Participate in preparation and serving of meals ? Prints and distribute recipes. ? Direct inmates in the use of Aramark recipes and train on proper cooking procedures. ? Ensure proper portions and any special dietary requirements are fulfilled. ? Obtain accurate daily population counts and review with staff. ? Adhere to security policies and procedures. Ensure storage areas are locked at all times. ? Ensure that all kitchen tools and equipment are returned to their designated secure area. Ensure all keys are returned and secured. ? Determines work procedures, prepares work schedules and sanitation schedules while ensuring that cooks, inmates and/or food service workers adhere to the assigned schedule. ? Assist in conducting inventory, properly receiving, and storing food and food related items. Requisition orders as needed for approval. ? Participates in the preparation/5 P?s (Participation, Pulls, Production, Portion Control, and Postproduction), storage and assembly of meals and food items. ? Follows the Company?s Standard of Operation for food handling and storage. Follows HACCP policies and procedures regarding proper food handling procedures. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Must be over 18 years of age ? Minimum of one (1) year of food prep or related work preferred ? Previous supervisory experience preferred ? Previous experience interacting with inmates a plus ? Ability to motivate and supervise inmates and/or team members to attain quality and quantity of food production in a correctional work environment ? Must be able to obtain a food safety certification ? Ability to work independently with limited supervision ? Ability to exercise good judgment and tact ? Must be able to follow basic safety procedures and policies ? Must qualify for and maintain correctional facility security clearance This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

The Food Service Worker at Northern Regional Jail supervises inmates to ensure that meal and food items are prepared in accordance with production plans. In this role, you will train workers in methods of performing duties, as well as assign and coordinate work to promote the efficiency of operations. This person is also responsible for the sanitation of the facility and maintaining personal safety, by conforming to all standards and regulations. Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Benefits: Full Health Benefits, 401k*, Vacation/PTO, Holiday Pay, College Tuition Assistance, Free Shift Meals & MORE! Starting Pay: $15/hour $500 RETENTION BONUS (based on performance and attendance) ? Adhere to and maintain preparation and production guidelines according to Aramark standards by reviewing and approving production and temperature logs. ? Supervise inmates in food preparation and tray assembly. ? Ensure timely, efficient meal service and all Aramark guidelines are being met. ? Participate in preparation and serving of meals ? Prints and distribute recipes. ? Direct inmates in the use of Aramark recipes and train on proper cooking procedures. ? Ensure proper portions and any special dietary requirements are fulfilled. ? Obtain accurate daily population counts and review with staff. ? Adhere to security policies and procedures. Ensure storage areas are locked at all times. ? Ensure that all kitchen tools and equipment are returned to their designated secure area. Ensure all keys are returned and secured. ? Determines work procedures, prepares work schedules and sanitation schedules while ensuring that cooks, inmates and/or food service workers adhere to the assigned schedule. ? Assist in conducting inventory, properly receiving, and storing food and food related items. Requisition orders as needed for approval. ? Participates in the preparation/5 P?s (Participation, Pulls, Production, Portion Control, and Postproduction), storage and assembly of meals and food items. ? Follows the Company?s Standard of Operation for food handling and storage. Follows HACCP policies and procedures regarding proper food handling procedures. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Must be over 18 years of age ? Minimum of one (1) year of food prep or related work preferred ? Previous supervisory experience preferred ? Previous experience interacting with inmates a plus ? Ability to motivate and supervise inmates and/or team members to attain quality and quantity of food production in a correctional work environment ? Must be able to obtain a food safety certification ? Ability to work independently with limited supervision ? Ability to exercise good judgment and tact ? Must be able to follow basic safety procedures and policies ? Must qualify for and maintain correctional facility security clearance This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

The Food Service Worker at Northern Regional Jail supervises inmates to ensure that meal and food items are prepared in accordance with production plans. In this role, you will train workers in methods of performing duties, as well as assign and coordinate work to promote the efficiency of operations. This person is also responsible for the sanitation of the facility and maintaining personal safety, by conforming to all standards and regulations. Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Benefits: Full Health Benefits, 401k*, Vacation/PTO, Holiday Pay, College Tuition Assistance, Free Shift Meals & MORE! Starting Pay: $15/hour $500 RETENTION BONUS (based on performance and attendance) ? Adhere to and maintain preparation and production guidelines according to Aramark standards by reviewing and approving production and temperature logs. ? Supervise inmates in food preparation and tray assembly. ? Ensure timely, efficient meal service and all Aramark guidelines are being met. ? Participate in preparation and serving of meals ? Prints and distribute recipes. ? Direct inmates in the use of Aramark recipes and train on proper cooking procedures. ? Ensure proper portions and any special dietary requirements are fulfilled. ? Obtain accurate daily population counts and review with staff. ? Adhere to security policies and procedures. Ensure storage areas are locked at all times. ? Ensure that all kitchen tools and equipment are returned to their designated secure area. Ensure all keys are returned and secured. ? Determines work procedures, prepares work schedules and sanitation schedules while ensuring that cooks, inmates and/or food service workers adhere to the assigned schedule. ? Assist in conducting inventory, properly receiving, and storing food and food related items. Requisition orders as needed for approval. ? Participates in the preparation/5 P?s (Participation, Pulls, Production, Portion Control, and Postproduction), storage and assembly of meals and food items. ? Follows the Company?s Standard of Operation for food handling and storage. Follows HACCP policies and procedures regarding proper food handling procedures. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Must be over 18 years of age ? Minimum of one (1) year of food prep or related work preferred ? Previous supervisory experience preferred ? Previous experience interacting with inmates a plus ? Ability to motivate and supervise inmates and/or team members to attain quality and quantity of food production in a correctional work environment ? Must be able to obtain a food safety certification ? Ability to work independently with limited supervision ? Ability to exercise good judgment and tact ? Must be able to follow basic safety procedures and policies ? Must qualify for and maintain correctional facility security clearance This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

Company Overview Established in 1952, Marsden Services offers comprehensive facility services to clients nationwide. We provide clients with high-quality and professional services including janitorial, security, HVAC, calibration, emergency response, and facility management services. Feldkamp Enterprises, Inc., a division of Marsden, specializes in commercial and industrial HVAC, maintenance, plumbing, retrofit and installation, pipe fitting, sheet metal and fabrication, engineering and Project Management. Our hiring philosophy is rooted in the idea that we want our employees to grow and be successful with our organization. We believe in our employees. We invest in our employees. A career at Marsden means a career with a Company that will support your growth. Position Summary We are seeking a highly skilled and motivated Project Manager to join our rapidly growing team! The Project Manager role plans, directs, manages and provides oversight of assigned design and construction projects to ensure that the Company’s goals and objectives are accomplished within prescribed schedule and budget parameters. Successfully communicates with clients, field staff, estimating team, contractors and management. Provides internal and external coordination and collaboration with project partners and key stakeholders. Core Responsibilities • Partner with Estimation team to review project budgets, production timelines, manpower requirements, General Contractor contacts, provided drawings and specifications, material and equipment requirements, etc., to ensure all details align with the estimate and are accurate for the project., • Provide feedback on any discrepancies between initial budgets and materials to ensure all aspects of the job are outlined by the estimate and specifications., • Coordinate with Drafting department on any/all drawing requirements., • Facilitate assigning staff to each jobsite as required by production and job specifications., • Coordinate purchasing of materials, reviewing weekly job costs and productive hours, ensure appropriate communication regarding project timelines, known issues, changes to scope of work or projected timelines, reviewing of other sub-contractors onsite which directly affect jobsite production and deadlines., • Attend weekly Operations Meeting to address job costs, % of completion for each project and phase, review and ensure tracking forms are accurate, update on any change orders and T&M Tickets received or completed, anticipated labor to finish the job, discuss any current or potential problem areas., • Communicate via email, phone or in-person with General Contractors, Sub-Contractors and Vendors as required., • Document all aspects of the project and jobsites via ProCore, email and official letterhead as required for any know issues, meeting notes and agendas, scope of work changes (change orders, T&M Tickets, etc.,)., • Update President and Head Estimator on any known issues with the project which requires additional deadline requests, material or equipment delays or costs, potential for damages, letters that have been sent with updates to General Contractors, lawyer involvement, etc..., • Provide leadership and any required direction or training to Foreman as needed to develop talent and skills. Education and Experience Required • 10+ years of demonstrated PM field experience in HVAC/Sheet Metal required, • Must have at least 5 years successful leadership of crews and projects, • Journeyman Level experience (5+ years of field work or Journeyman License), • OSHA 30 Certified, • Proven ability to drive standardization and best practices, • Must be self-directed, customer-focused, and organized, • Creates a collaborative environment, possesses a sense of humor, integrity, and forges the right relationships to drive the right results, • Ability to communicate verbally and in writing in a professional manner to all levels inside and outside the Company, • Ability to travel regionally (work vehicle and fuel card provided) Measures of Success • Completing projects within time and budget meeting or exceeding the specifications set by stakeholders, • Enhancing Marsden’s execution and agility by defining, delivering, and supporting project plans that support our rapid growth and standardization across multiple sites Business Conduct • Commits to behave in compliance with the company’s values and Code of Conduct, • Builds a culture of work safety and leads by example with one's own safe behavior, • Treats co-workers with respect and approaches conflict with positive intent and professionalism, • Asks questions to understand why we do what we do and how we do it - champions change when improvements can be made, • Ensures one's own compliance with the company's published Operations Standards EEO Statement Marsden Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, creed, ancestry, sexual or affectional orientation, marital or veteran status, color, religion, sex, national origin, age, disability, genetics, status with regard to public assistance or any characteristic protected under federal, state or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice

JBK Manufacturing is recruiting for a CNC Machinist/Operator.We are a growing company, and we are looking for a candidate that is looking for a growth opportunity and a long-time career. JBK Manufacturing is highly recognized in the manufacturing industry as the precision machine shop for custom build-to-print manufacturing services. Through the utilization of strong business practices, investing in new machinery, and highly skilled employees, we continue to re-engineer ourselves to provide our customers with viable solutions for any project. The quality of our products and on-time delivery are two of the most important assets JBK Manufacturing has to offer. At JBK Manufacturing we are dedicated to Customer Satisfaction, Investing Forward, and Doing the Right Thing. We pride ourselves on fostering a culture of innovation, collaboration, and personal growth. Our commitment to excellence, customer satisfaction, and employee development has consistently driven our success. We are the best partners for success when it comes to high-quality CNC precision machining, assembly, tube bending, welding, and brazing along with other special processes. Making sure every part that leaves our facility is not only built to our customers specifications, but that it is proudly Made in the U.S.A. The CNC Machinist will set up and operate Mori-Seki/Hwacheon (Fanuc) CNC single/multi spindle Lathes and/or Mills and will be responsible for running production on multiple machines. The CNC machinist will also operate computer numerical control machines to fabricate parts. The machinist will load parts in the machine, cycle machines and detect malfunctions in machine operations, such as worn or damaged cutting tools. This position communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. At JBK Manufacturing, we’re committed to pushing boundaries in aerospace technology while fostering a culture of continuous improvement. Join our team of forward-thinkers and innovators! This role offers the chance to work with cross-functional teams, master cutting-edge technologies, and grow within our expanding company. Take on the rewarding challenge of leading projects in our high-tech facility and see your ideas turn into real-world aerospace solutions. Requirements/Job Duties: · CNC Programming and Set-Up · Perform all assigned machine shop operations · Detect and report defective materials or questionable conditions to management or designee. (i.e., tool wear, surface finish, and foreign object debris) · Maintain the work area and equipment in a clean, orderly condition and follow prescribed · Complete and maintain paperwork for parts. · Performs all assigned machine shop operations. · Performs inspection of machined products, and documents results. · Interact with quality to resolve any quality issues within the department · Use micrometers & calibers · Thorough knowledge of all types of tooling and materials · Meet ongoing production quotas while working within very close tolerances in a machine-shop production environment · Assists in other work areas to perform fabrication, lay-up, infiltration, and sand blasting tasks. · Make quality parts that meet customer specifications and deadlines, without rejection, in a fast-paced work environment · Contribute to team effort by performing other supporting tasks as directed by the Operation or Production Managers. Qualifications: · Mathematical Skills · Mechanical and Technical Capacity · Time Management skills · Previous experience in manufacturing or assembly preferred. · Ability to lift and carry heavy objects · Basic understanding of aerospace manufacturing processes. · Strong attention to detail and qualify · Good communication skills and ability to work in a team environment · Standing for long periods · Ability to wear personal protective equipment (PPE) · U.S. Citizen. Benefits: · Medical Benefits · Dental-50% Employer Paid · Vision-50% Employer Paid · STD-50% Employer Paid · LTD-50% Employer Paid · Protec Prescription Safety Glass Plan-Employer Paid · Company Paid EAP · Voluntary Benefits- Life, Accident, Specified Disease, Pet Insurance and ID & Legal Shield · PTO · 10 Paid Holidays · 1 Paid Floating Holiday · Wellness Program · Telehealth Services · 2nd Shift Premiums · 401K up to 4% match Benefits (Continued…..) · FSA Account · Company Paid Life Insurance $20,000 · Paid Parental Leave · Paid Prenatal Leave · Paid Bereavement · Tuition Reimbursement · Safety Shoe Allowance · Employee Discount Program · Company Events & Luncheons · Referral Program Full time, No Less than 40 hours per week, 1st Shift 6 am – 4:30 pm 2nd Shift 4p-4a Premier Aerospace Group, LLC is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resource Assistant at 937-223-8300 ext. 211 or email @ .

Nutrition Services Director Career Opportunity Appreciated for your Nutrition Services skills Are you in search of a career close to home and heart, where your nutrition expertise can make a significant impact? As the Nutrition Services Director at Encompass Health, you will lead the coordination and direction of our Nutrition Services Department. Your responsibilities will include setting and implementing policies and procedures that guide cafeteria management, food preparation, budgeting, purchasing, staff development and safety practices. If you are passionate about having a career close to home and heart, then consider joining us to help patients heal. A Glimpse into Our World At Encompass Health, you'll experience the difference the moment you become a part of our team. Working with us means aligning with a rapidly growing national inpatient rehabilitation leader. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing. Starting Perks and Benefits At Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to: • Affordable medical, dental, and vision plans for both full-time and part-time employees and their families., • Generous paid time off that accrues over time., • Opportunities for tuition reimbursement and continuous education., • Company-matching 401(k) and employee stock purchase plans., • Flexible spending and health savings accounts., • A vibrant community of individuals passionate about the work they do! Become the Nutrition Services Director you always wanted to be • Manage Departmental budget as it relates to position., • Perform and document all purchasing, receiving, and inventory control of food and supplies., • Maintain proper sanitation, temperature, and food handling techniques to comply with regulations., • Determine quality, quantity and portion size of food required and ensure proper handling of food., • Ensure adequate staffing and management of the department's employees., • Ensure production for both patient meals and cafeteria line are properly coordinated., • Develop cafeteria menu as needed., • Purchase food, assist with and assign duties for special needs or special occasions. Qualifications • Registered Dietitian (RD/RDN) with the Commission of Dietetic Registration (CDR) or Certified Dietary Manager (CDM) with the Certifying Board for Dietary Managers (CBDM) or an executive chef required., • Three to five years of healthcare clinical nutrition, or executive chef experience required., • Ten plus years healthcare food service experience, or five plus years of healthcare management experience required., • Graduate of a Bachelor's degree program in Dietetics, Culinary Arts or related field preferred., • Must have thorough knowledge of nutrition and dietetics, administration, and operation of hospital food services, and knowledge of all H.A.C.C.P. guidelines. #LI-TR1 The Encompass Health Way We proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing! At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.

Description Do you want to join a high performing team that values integrity, innovation, and collaboration with a company whose mission is to make the world safer, healthier, and more efficient through information technology, engineering, and science? Are you interested in making a difference by applying your signature production skills toward state-of-the-art research and development problems? Leidos currently has an exciting opening for a signatures modeling engineer to work in our Beavercreek office in the greater Dayton, OH area. As a Signatures Modeling Engineer, you will apply your skills and critical thinking to a wide variety of signature modeling programs supporting AFRL, NASIC, LCMC, and other customer agencies. You will run state of the art signature prediction codes, like Xpatch and SENTRi on airborne and ground-based vehicle models to generate highly accurate signature models. You will also create custom signature prediction tools and perform special analyses in support of critical customer mission areas. This job offers a unique ability to collaborate directly with the creators of industry standard tools such as Xpatch as well as others (SENTRi, etc.). We are looking for a qualified candidate to bring technical excellence, leadership, entrepreneurship, and creativity to our programs. You will interact with customers, participate in, and lead technical projects areas, and pursue growth in new areas. This position requires most job duties to be performed onsite due to the sensitive nature of this work and the desire for in-person collaboration, however we offer flexible in-office hours and the ability to perform some job duties remotely. Primary Responsibilities * Model and characterize electromagnetic (EM) phenomenology (scattering, absorption, polarization, refraction, diffraction, etc.) primarily in, but not limited to, radio frequency (RF) bands * Characterize and evaluate radar cross sections (RCS) * Verify and validate measured data and computational electromagnetic (CEM) predictions * Create signature predictions using CEM prediction software (SENTRi, Xpatch, COMSOL, CST, HFSS, Feko, etc.) * Write and present technical information related to development activities * Assist or lead the team with business development activities by supporting proposal and technical solution development and also in interfacing with other parts of Leidos for multi-disciplinary capture opportunities * Apply technical leadership abilities and lead or assist teams to develop solutions for complex technical issues Basic Qualifications: * Bachelor’s degree with 12+ years’ experience or a master’s degree or higher with 10+ years’ experience in Electrical Engineering or a closely related scientific field such as Physics, Optics, Engineering Physics, etc. * US citizen * Must have an active Secret clearance with the ability to obtain a TS/SCI clearance * Strong understanding of applied electromagnetics with skills in EM modeling and experimentation * Adept in CEM prediction software and proven history of applying simulation tools to characterize EM phenomenology * Excellent communication skills and a willingness and interest to collaborate in an interdisciplinary team environment to drive towards overall project and team objectives * Expert in technical writing, documentation, and organization * Ability to both lead and work as a team member * Strong attention to detail and deadlines * Ability to lead small technical teams to solve complex problems * A self-starter with a strong drive to lead and develop solutions that meet customer demands in a timely manner Preferred Qualifications: * PhD * Active TOP SECRET is desired, but not required * Radar Cross Section (RCS) design familiarity * Knowledge of antenna and radome design principles * CAD and meshing familiarity * Supervisory experience * Interest in Business Development * Entrepreneurial interest in working across multi-disciplinary teams on larger, more complex undertakings * A basic understanding of, or exposure to the following is a plus, but not required: * Automatic Target Recognition * Radar signal processing fundamentals * MATLAB, Python, and C++ * Experience with running simulations on high-performance computing (HPC), graphics processor units (GPU), and other advanced processing platforms If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 17, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $131,300.00 - $237,350.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Senior Buyer FLSA Status: Salaried-Exempt Reports To: Purchasing Manager Department: Operations Position Summary Responsible for developing and executing procurement strategies to ensure the timely and cost effective acquisition of materials, components, and supplies. This role focuses on vendor management, cost control, contract negotiations, and ensuring material availability to support production and operations. Works cross-functionally with engineering, production, planning, and quality teams to optimize the supply chain and mitigate risks. Primary Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded as needed. Procurement & Purchasing • Identify, evaluate, and negotiate with suppliers to secure the best terms for pricing, quality, and lead times, • Issue and manage purchase orders (POs) while ensuring on-time delivery of materials, • Monitor and control material costs to align with budgetary and profitability goals, • Support and manage cost-reduction strategies and optimize supplier performance, • Establish and maintain strong relationships with key suppliers and vendors, • Conduct supplier performance evaluations, ensuring compliance with quality and delivery expectations, • Resolve supplier issues related to quality, delivery, and cost discrepancies, • Collaborate with Production, Planning, and Warehouse teams to ensure material availability, • Support inventory level optimization to reduce excess stock while preventing shortages, • Monitor supplier-managed inventory (SMI) or just-in-time (JIT) strategies, • Negotiate and manage supplier agreements, contracts, and terms, • Ensure compliance with regulatory requirements, company policies, and industry standards, • Work with Quality and Engineering teams to ensure purchased materials meet specifications, • Drive cost-saving initiatives through strategic sourcing and supplier collaboration, • Work with Engineering to identify opportunities for material standardization and cost effective alternatives, • Maintain key procurement metrics (e.g., cost savings, supplier performance, purchase lead times), • Participate in lean initiatives to streamline procurement processes and eliminate waste Requirements Education & Experience • Bachelor’s degree in Supply Chain Management, Business, Engineering, or related field preferred, • Minimum of five (5) years of experience in procurement, sourcing, or supply chain management within a manufacturing or assembly environment, • Experience with ERP/MRP systems for purchasing and material planning, • Strong understanding of supply chain principles, contract negotiation, and cost analysis Skills & Attributes • Strong negotiation and supplier relationship management skills, • Analytical mindset with experience in cost reduction and risk mitigation strategies, • Ability to work cross-functionally with Engineering, Production, and Quality teams, • Knowledge of lean manufacturing, JIT, and strategic sourcing practices, • Proficiency in Excel, ERP/MRP systems, and procurement software, • Strong problem-solving, communication, attention to detail, and multitasking skills, • Proficiency with Microsoft Office (Word, Excel, Outlook); ERP system experience preferred Licenses & Certifications • None Work Environment • Exposure to manufacturing environment including noise, machinery, and varying temperatures, • Standard office environment Physical Demands • Frequently required to stand, walk, and sit for extended periods, • Occasional lifting up to 25 pounds, • Requires close vision, distance vision, and ability to adjust focus Success Factors in This Role • Alignment with company values and operational goals, • Proactive problem-solving and decision-making, • Ownership and accountability for performance and safety, • Strong collaboration with cross-functional teams, • High level of safety and quality awareness

Overview A leading packaging manufacturer is seeking a Maintenance Manager to oversee maintenance operations in a high-speed production environment. This role is ideal for a hands-on leader with a strong technical background in electrical, mechanical, and automated systems who thrives in a fast-paced, team-oriented setting. What You’ll Do • Oversee all maintenance activities for plant equipment and systems, • Develop and manage preventive maintenance programs to ensure minimal downtime, • Troubleshoot and repair machinery and equipment as needed, • Maintain accurate maintenance records and ensure compliance with operational standards, • Manage spare parts inventory and maintain organized storage areas, • Coordinate and oversee on-site contractors and service providers, • Lead, train, and develop a team of maintenance technicians, • Assess training needs and support continuous skill development, • Manage scheduling, timekeeping, and performance evaluations for maintenance staff, • Promote a culture of safety, teamwork, and continuous improvement, • Collaborate with other departments to support production efficiency and reliability What We Offer • Comprehensive health, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid vacation and holidays, • Short- and long-term disability, plus company-paid life insurance, • Education assistance and tuition reimbursement programs, • Wellness and recognition programs, • Opportunities for advancement and professional growth What Makes You a Great Fit • Bachelor’s degree in Electrical Engineering or related technical field (or equivalent experience), • Minimum 4 years of experience in maintenance leadership within manufacturing or related industries, • Strong knowledge of hydraulics, pneumatics, and computer-controlled machinery, • Proven experience managing maintenance teams in a fast-paced production setting, • Excellent organizational and leadership skills, • Solid understanding of mechanical and electrical systems and general industrial equipment Physical Requirements • Regularly required to stand, walk, reach, climb, balance, and use hands to handle tools or equipment, • Frequently required to stoop, kneel, crouch, and communicate effectively, • Occasionally required to sit, • Must be able to lift and move up to 30 lbs. frequently, and occasionally over 50 lbs., • Must have close vision and the ability to focus on detail-oriented tasks

Senior HR Business Partner Dayton, Ohio Who we are: Supply Technologies, a subsidiary of ParkOhio(NASDAQ:PKOH), specializes in supplier selection and management, planning, implementing, managing the physical flow of product for world-class international manufacturing companies, and servicing customers in the various markets. Apply today and become part of a team on this journey within more than 100 industries; expertise in nearly every inventory management discipline; use of advanced and emerging technologies, and a singularly connected global infrastructure, only Supply Technologies has the intellectual and technological infrastructure to give you a program of process, resource and production efficiencies that improve your competitive position in the marketplace. Job Summary: The Senior HR Generalist will serve as a key partner with the warehouse operations leadership, providing strategic and hands-on support in all areas of human resources. This role ensures compliance with labor laws, drives employee engagement, and supports workforce planning to meet operational goals. The ideal candidate will have strong experience in high-volume, fast-paced environments and a deep understanding of HR best practices within the warehouse or logistics industry. Responsibilities: • Employee Relations:, • Act as the primary point of contact for employee inquiries and concerns., • Investigate and resolve workplace issues, ensuring fair and consistent application of policies., • Recruitment & Staffing:, • Partner with HR Director to understand workforce forecast & staffing needs and execute recruitment strategies with the TA Manager., • Lead recruitment & selection best practices. Manage onboarding and orientation for new hires within NA employee designation., • Maintain applicant data accuracy within HCM- UKG & monthly racking of hiring metrics and countermeasure action items., • Performance Management:, • Drive completion of annual performance appraisal activity., • Support supervisors in coaching, counseling, and performance improvement plans., • Facilitate annual performance review processes of training., • UKG system Administrator for Performance Management system ; creation & distribution (Annual Reviews, 90-day Reviews, etc.), • Compliance & Policy Administration:, • Ensure compliance with federal, state, and local employment laws (EEO, FMLA, OSHA)., • Maintain accurate employee records and HRIS data., • Maintain Monthly HR Metrics., • Training & Development:, • Identify training needs and coordinate programs for warehouse staff and leadership., • Promote career development and succession planning initiatives., • Safety & Engagement:, • Collaborate with safety teams to reinforce workplace safety standards., • Bachelor’s degree in Human Resources, Business Administration, or related field, • 5+ years of HR experience, with at least 2 years in a generalist role supporting warehouse or manufacturing operations., • Strong knowledge of employment laws and HR best practices., • Proficiency in HCM systems (UKG) and Microsoft Office Suite., • Experience in high-volume recruitment and workforce planning., • Certification in HR Management OUR Team Members: Do The Right Thing and we will succeed: We insist on honest and ethical behavior; We treat others respectfully; Our actions are underlined with high integrity; We partner with others who hold these same values. Go One Better to achieve greatness: We strive to do our best every day; We are curious and seek alternative viewpoints; We value innovation to deliver long-term success; We will not accept the status quo and tirelessly seek to improve. Customer First balanced with Company results: We serve our customers with a sense of urgency; We strive to anticipate our customer’s needs; We work with our customers to ensure we are providing them the best solutions they value; We help to deliver the long-term success of our company. WE DO what we say: We seek clarity and understanding; We follow through on our commitments; We respectfully challenge and collaborate to achieve mutual success; Once we agree, we move forward and make no excuses. Together we win: We respect and value each other’s thoughts and opinions; We make the time to develop meaningful relationships; We seek new opportunities to continuously learn: We never miss an opportunity to bring out the best in others. Make a career at SUPPLY TECHNOLOGIES: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution. Supply Technologies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Machining Process Engineer - NPI (New Product Introduction) Dayton, OH Build your future on a world-class shop floor with the latest gear, veteran mentorship, and a schedule that respects your life! 📌 Modern Gear & Cutting-Edge Tech: Join a forward-thinking company that puts its money where its mouth is. You’ll work in a pristine, "eat-off-the-floor" facility equipped with recently upgraded machining centers and the latest technology. 📌 Decades of Stability, Poised for Growth: Step into a role at a well-established firm that combines the security of a long-standing history with the excitement of a new growth phase. We’re expanding our business, and we want you to be part of the momentum! 📌 Unmatched Culture & Mentorship: Work alongside a veteran team with an average tenure of 10+ years. You’ll report to an Engineering Manager who knows the ropes and is committed to a collaborative, team-centric environment where your CNC expertise truly shines. 📌 True Work/Life Harmony: Say goodbye to burnout. We offer a flexible start-time window (7–9am) and a consistent 40–45 hour workweek with virtually no weekends, ensuring you have plenty of time for life outside the shop. 📌 Total Rewards for Your Talent: Beyond a diverse range of engineering responsibilities, enjoy a comprehensive package, including affordable healthcare, a competitive 401K match, and annual bonus potential! Profitable, leading machining manufacturer with a diverse business mix is hiring a Machining Process Engineer - NPI to join their new model engineering team. The Machining Process Engineer - NPI will work with a team of engineers and will report to an engineering manager to support machining and other processes. Responsibilities will include: • Leading up to four new model machining projects at a time, responsible for the timelines, • Determining manufacturability for new business, including establishing the manufacturing steps and documenting the process, • Support operations until product is running efficiently and at or below budget, • Work with planning on machine availability, • Provide feedback to the customer when needed, • Partner with the design engineering team for design support, • Work with all levels of manufacturing to complete projects, • Monitor the new product timelines, ensuring on time delivery, • Assist with capital equipment projects, including overseeing timelines, • Provide documentation, such as creating work instructions, • Other duties as directed by engineering management This is a hands-on role that requires qualified candidates to be on the manufacturing floor up to 50% of their day, communicating with the production staff and working as a team to effectively launch new products into production. This site offers the opportunity to work with cutting edge equipment and robotics. Candidates should enjoy working in a team environment, be able to lead projects independently, and support a team-oriented environment. The company offers a three tier, competitive medical benefits package (including dental and vision) available on the 31st day of employment, 401K (50% up to 4%), paid holidays and vacation, tuition reimbursement, life insurance and an annual bonus potential! REQUIREMENTS for the Machining Process Engineer - NPI: 1. Minimum of a high school diploma with at least ten years of similar engineering experience OR a Bachelor’s degree with at least three years of similar engineering experience, 2. Experience working in CNC machining environments, 3. Experience creating, improving and/or troubleshooting machining engineering processes, 4. Experience overseeing project timelines, 5. Microsoft Office Skills preferred but NOT required: 1. Automated work environments, including robotics, 2. 2D and/or 3D modeling experience, 3. Statistical Process Control (SPC), 4. New product launch, 5. GD&T Reasons to work for this organization: 📌 Medical, dental and vision – GREAT medical perks available on the 31st day of employment 📌 Diverse business mix 📌 Opportunity to work with cutting edge machining technology 📌 Opportunity for customer interaction 📌 Annual bonus potential 📌 Excellent work/life balance, with very rare weekends 📌 Updated office space in a bright working environment

Job Description Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: The Sheet Metal Installer installs sheet metal to produce an aircraft galley assembly. This is a 1st shift position, Mon-TH 5:30 am – 4:00 pm. Essential Responsibilities: • Deburr parts using mechanical means (hand tools and pneumatic grinders), • Cleaning and washing parts to remove manufacturing oils, dirt and debris, • Using hand tools, power tools, layout tools, and fasteners like bolts, screws, rivets, or clamps, • Installing and removing rivets on sheet metal, • Building sub-assemblies of aircraft parts and structures using engineering drawings and company specifications, • Reading blueprints, illustrations, or specifications to determine layouts, • Attaching operating equipment, and some electrical components, • Ensure continuous production of parts that meet customer expectations, • Inspect completed parts using micrometers, indicators, calipers, comparators, etc., • Maintain quality standards through understanding the Quality Management System, • Monitor and document operational and performance issues and provide feedback to supervisor, • Develop and maintain effective working relationships with peers, supervisors, and other staff, • Installing and removing rivets experience preferred, • Sheet metal experience preferred, • High school diploma or GED required; post-secondary Air Frame Aviation Maintenance experience preferred, • Strong verbal communication and problem-solving skills, • Attention to detail and ability to deal with complexity, • Sit – Occasionally, • Stand – Continuously, • Lift/Carry – up to 20 lbs Occasionally, • Walk – Occasionally, • Bend/Stoop – Occasionally, • Use hands for pushing/pulling – Frequently As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job DescriptionJoin a great company! Our Repair Technicians: Roofing & Masonry provide our customers comprehensive exterior services, including specialized repairs for roofing, siding, gutters and masonry, providing exceptional service. Work trucks and fuel will be provided by Bone Dry Roofing. Our compensation is salary based plus commission. WE WILL TRAIN!Duties and Responsibilities • Your primary responsibility is to represent Bone Dry Roofing, Inc with the highest degree of professionalism, punctuality, and integrity while providing our customers with respect, honesty, and the highest level of customer service., • Perform necessary repairs for homeowners as described in the scope of work. Scope of work can include, but is not limited to roofing, masonry, gutters and siding., • Mixing/making mortar, and brick replacements., • Be the main point of contact for the customer during the project., • Estimate materials and labor required to complete projects., • Communicate with homeowners before, during, and after projects., • Be on call for after-hours emergency calls if on rotation., • Prepare and collect invoices once the job is complete., • Look for other necessary repairs, i.e., gutters, windows, etc., • Follow all safety procedures., • This position is required to work two Saturdays per month during peak season (March-November).Qualifications, • High school diploma or equivalent, • Valid driver's license, • Pass a background check, • Must be able to lift up to 100 lbs., • Must be able to climb a ladder safely and work at elevated heights on roofs, • Previous roofing industry experience preferred, • Previous masonry experience preferred, • Willingness to travel up to 5%, • Military service is a plusCompensation and Benefits, • Hourly pay range $18- $30 commensurate with experience or 100% commission options available, • Medical, vision, and dental insurance available, • Company paid life insurance, • Company paid short-term disability, • 401(k) plan, • PTO, vacation, and holidays

Engineering Manager - Swiss CNC Machining Dayton, OH Lead a high-performing team of tenured engineers in a pristine Swiss CNC facility that offers the rare combination of decades-long stability, cutting-edge technology investment, and a true 40–45 hour workweek! 📌 Elite Leadership & Team Synergy: Lead a highly skilled team of tenured Swiss CNC engineers and tradespeople who operate as a true unit. With an average staff tenure of 10+ years, you’ll be managing a group that values collaboration and mutual support. 📌 Be the Site’s Swiss CNC Authority: Step in as the go-to technical expert for the area. You will leverage your deep Swiss CNC machining background to drive excellence on a shop floor widely known for being so clean that "you could eat off of it." 📌 Multi-Million Dollar Growth & Modernization: Be responsible for a specialized area of the site that combines decades of stability with a recent multi-million dollar investment in cutting-edge machining centers. We are an established firm poised for a massive new business phase, and we want you to lead that momentum! 📌 Management with True Balance: Lead at a high level without sacrificing your personal life. We offer a consistent 40–45-hour workweek and virtually no weekends. 📌 Comprehensive Executive Rewards: We value your leadership with a package that includes affordable medical/dental/vision, a competitive 401K match, and significant annual bonus potential. Profitable, leading machining manufacturer with a diverse business mix is hiring an Engineering Manager - Swiss CNC Machining to lead the engineering and skilled trades team in a premier, competitive, cutting edge technology Swiss CNC machining environment. The Engineering Manager - Swiss CNC Machining will report to a Sr. Engineering Manager to support machining and other processes. Responsibilities will include: • Coach, mentor and develop a team of engineers and skilled trades professionals, • Supply Swiss CNC machining expertise to the staff and facility, • Participate in weekly quoting meetings to determine fit and manufacturability for Swiss CNC engineering projects, • Read and interpret blueprints, as well as GD&T, • Assign CNC machining jobs to staff and monitor timely completion, • Provide status updates to operations, sales and engineering teams, • Initiate training to production associates for new and existing projects, • Assist Swiss CNC team with troubleshooting programming and offering guidance, • Partner with production when needed to troubleshoot process and manufacturability issues, • Manager tooling and CapEx projects, including overseeing timelines and budgets, • Complete cost justification, ROI analysis, and obtain quotes, • Other duties as directed by engineering management This is a leadership role that requires qualified candidates to be on the manufacturing floor up to 25% of their day and have the ability to wear many hats. Candidates should have strong Swiss CNC machining technical skills and the ability to coach and mentor others, support and foster a team-oriented environment and the desire to develop the staff. This site offers the opportunity to work with cutting edge equipment and robotics in a growth focused environment. The company offers a three tier competitive medical benefit package (including dental and vision) available on the 31st day of employment, 401K (50% up to 4%), paid holidays and vacation, tuition reimbursement, life insurance and an annual bonus potential! REQUIREMENTS for the Engineering Manager - Swiss CNC Machining: 1. Minimum of a high school diploma or GED, 2. Extensive Swiss CNC machining experience, at least 10 years total and 1-2 years in a lead engineering position, 3. Swiss CNC programming experience, at least 2-3 years, 4. Working knowledge of metrology tools, including calipers, gauges, micrometers, etc., 5. Working knowledge of GD&T, 6. The ability to read blueprints, 7. Experience working in a QMS regulated environment, such as IATF 16949, ISO 9001, ISO 13485, etc., 8. Microsoft Office Skills preferred but NOT required: 1. Automated work environments, including robotic technologies, 2. Mechanical aptitude, 3. Quoting experience, 4. SolidWorks and/or PartMaker CAM Software Reasons to work for this organization: 📌 Medical, dental and vision – GREAT medical perks available on the 31st day of employment 📌 Diverse business mix 📌 Opportunity to work with cutting edge machining technology 📌 Opportunity for customer interaction 📌 Annual bonus potential 📌 Excellent work/life balance, with very rare weekends 📌 Updated office space in a bright working environment Candidates are preferred to be local to the Dayton, OH area. There is a conservative relocation package available for regional candidates who meet all of the requirements.

Job DescriptionJoin a great company! Our Roofing Repair Technicians complete a variety of roofing jobs for Bone Dry Roofing customers, all while providing exceptional service. Here at Bone Dry we also believe in setting our technicians up for success with training opportunities, and incredible support. Work trucks, fuel, and phones will be provided by Bone Dry Roofing. Our compensation is salary based plus commission. WE WILL TRAIN!Duties and Responsibilities • Your primary responsibility is to represent Bone Dry Roofing, Inc with the highest degree of professionalism, punctuality, and integrity while providing our customers with respect, honesty, and the highest level of customer service., • Perform necessary repairs for homeowners as described in the scope of work. Scope of work can include, but is not limited to roofing, gutters, and siding., • Be the main point of contact for the customer during the project., • Estimate materials and labor required to complete projects., • Communicate with homeowners before, during, and after projects., • Be on call for after-hours emergency calls if on rotation., • Prepare and collect invoices once the job is complete., • Look for other necessary repairs, i.e., gutters, windows, etc., • Follow all safety procedures., • This position is required to work two Saturdays per month during peak season (March-November).Qualifications, • High school diploma or equivalent, • Valid driver's license, • Pass a background check, • Must be able to lift 50 lbs., • Must be able to climb a ladder safely and work at elevated heights on roofs, • Willingness to travel up to 5%, • Industry experience preferred but not required - we will train!, • Military service is a plusCompensation and Benefits, • Salary plus commission ( earnings potential = $70,000+), • Medical, vision, and dental insurance available, • Company paid life insurance, • Company paid short-term disability, • 401(k) plan, • PTO, vacation, and holidays

Company Description Independent Can is a leading manufacturer specializing in decorative and specialty metal packaging with an emphasis on high-quality craftsmanship. For over 90 years, this family-owned company has delivered unmatched metal lithography, combining innovation, excellence, and outstanding customer service. Renowned for its commitment to producing quality products, Independent Can sets itself apart as an industry leader. The company operates with a dedication to continuous improvement and exceptional employee engagement to meet evolving market demands. Role Description The Plant Manager is responsible for overseeing daily operations within the manufacturing facility in Vandalia, OH. In this full-time, on-site role, the Plant Manager will oversee production processes, manage plant staff, coordinate production schedules, and ensure efficient and safe manufacturing practices. Key responsibilities include leading operations to meet production goals, maintaining compliance with company standards, handling operational planning, and facilitating communication across teams to promote a culture of accountability and continuous improvement. Qualifications • Proven expertise in Plant Management and Plant Operations, including directing and optimizing manufacturing environments., • Must have a six sigma black belt., • Strong background in Operations Management, with the ability to improve operational efficiency and achieve production goals effectively., • Experience in Production Planning and Manufacturing Operations to ensure coordination of schedules and high-quality output., • Exceptional leadership and problem-solving skills, with the ability to mentor teams and maintain a safe, collaborative environment., • Knowledge of safety regulations, compliance standards, and best practices in manufacturing settings., • Bachelor’s degree in Business Administration, Engineering, Manufacturing, or a related field preferred., • Previous experience managing a manufacturing or production facility is highly desirable., • Strong organizational abilities, excellent communication skills, and the capacity to adapt to dynamic production demands.

Job Description Adecco is currently assisting a local Customer in their search for a Quality Inspector in DAYTON, OH. This is a great opportunity to further your existing skills as a Quality Inspector while learning new ones to assist you in your career. The best part is you would be joining a winning culture with Adecco while on assignment with our customer and have access to all our Adecco Perks! Perks: · 2nd Shift: Monday - Thursday - 3:30pm - 2am · Pay: $21.00 /hour · Access to Adecco’s Aspire Academy with thousands of free upskilling courses · We’re open to training the right candidate who demonstrates a strong willingness to learn and grow in this field. Key Responsibilities * Perform first article and first piece inspections. * Conduct in-process and final product inspections. * Verify operators are accurately measuring and recording dimensions. * Utilize measurement tools including CMM, micrometers, calipers, and gages. * Review and complete non-conformance documentation. * Interpret blueprints and GD&T specifications. * Support quality improvement initiatives and assist Quality Engineers. * Assist in other production areas as needed. Qualifications * High School Diploma or GED required * 3–6 years of quality inspection experience * Strong blueprint reading and GD&T knowledge * Experience with inspection tools (CMM, micrometers, calipers, gage blocks, pin gages) * Strong attention to detail and communication skills Work Environment * Production/manufacturing environment with moderate to high noise levels * Occasional lifting of 20–25 lbs This role is being recruited for by one of our Centralized Delivery Team and not your local Branch. To be considered, please follow the steps included upon your application. For instant consideration for this Quality Inspector position with Adecco in DAYTON, OH. Apply today! Pay Details: $21.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionNow Hiring – Be part of the future of electric vehicles! The LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today. We’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!Now Hiring – Be part of the future of electric vehicles!\r\nThe LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today.\r\nWe’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!

Now Hiring Machine Operator Vandalia, OH Pay Rate: $20.00 per hour Shift: Nights | 12-hour Rotating Shift | 7 PM - 7:30 AM Will train on the day shift for the first 4 - 6 weeks Built to Run. Paid to Operate. Been searching for "machine operator jobs near me " that offer more than just a paycheck? Gear up and join our team cause we are NOW HIRING! Must-Haves to Join the Crew • High school diploma or equivalent, • Previous machine operator experience (preferably in a food-grade facility), • Basic computer skills, • Competitive Pay: Weekly deposits that show respect for your skills., • Full Coverage: Health, Dental, Vision, Life Insurance + Disability., • Future Security: Optional 401(k) plan when you're ready to save., • Safety Always: We've got your back on the floor., • Operate and oversee production line machines from start to finish, • Start, stop, and adjust equipment as needed, • Monitor parison and material controls, • Conduct regular quality checks and visual inspections, • Prepare machines for mold changes, • Ensure products meet quality and quantity standards, documenting any issues Your next shift could be your best one yet. Apply today. Join a Team That Works for You At Staffmark, we're more than just a staffing company-we're your career partner. As part of RGF Staffing and Recruit Group, anHR powerhouse behind big names like Indeed and Glassdoor, we've got the muscle and the know-how to get you where you want to go. With more than half a century of experience and a track record of putting hundreds of thousands of people to work every year, we've got your back. Whether you're looking to level up, switch gears, or just get to work fast, we make it happen. Join us and experience the advantage of working with a trusted name in recruiting-because your success is our success. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Staffmark is partnering with a respected local manufacturer to offer a Janitor position. If you're reliable, hardworking, and take pride in keeping spaces clean and safe, this could be the perfect role for you! Pay Rate: $18/hr Shift Available Only: Monday - Friday | 6:00 AM - 2:00 PM Your Responsibilities • Clean offices, lobbies, break rooms, restrooms, and production areas, • Sweep, mop, dust, remove trash, and sanitize regularly, • Maintain outdoor grounds, including trash pickup, snow shoveling, and salting, • 2+ years of janitorial experience, preferably in manufacturing, • Ability to sit, stand, or walk throughout the shift, • Capable of lifting up to 50 lbs. We care about your success and well-being. That's why we offer a full benefits package including medical, dental, and vision insurance, life insurance, short-term disability, and a 401(k) retirement plan. You'll also enjoy weekly pay, employee discounts, and career advancement opportunities. Take the next step in your career with a company committed to your growth and success! Apply today to connect with a recruiter and get started. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Overview Shearer's Foods, founded in 1974 and headquartered in Massillon, OH, is a leading manufacturer of salty snacks, cookies, and crackers. Specializing in private label and co-manufacturing, Shearer's is the largest supplier of private brand salty snacks and second-largest supplier of private brand cookies and crackers. With a strong focus on innovation, service, quality, and sustainability, Shearer's has been awarded the food industry's highest award for environmental sustainability, as well as multiple Supplier of the Year awards. Operating 16 locations across North America and employing more than 5000 team members, Shearer's is driven by its core values of People, Grow, Impact and Win. The company mission is to deliver exceptional products and services that make snacking a time to celebrate for our customers, colleagues, and community. At Shearer's Foods, we believe in a skills-first approach to recruitment and employment. This means focusing on what you can do and how you can grow, rather than traditional metrics alone. We are committed to adhering to anti-exclusion practices, removing barriers to access, and enhancing opportunities for all individuals based on merit and potential. Your skills, experience, and perspective are valuable-and we want to empower you to make your mark here with us. Responsibilities Electro Mechanical Maintenance Technician Night Shift 7pm to 7am Hourly Rate: $34.50-42.00 $5000 Hiring Bonus The Maintenance Technician maintains the efficiency of machinery and equipment in a continuous improvement-based environment, while also creating and maintaining a safe work environment. Position is responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnoses equipment malfunctions and makes repairs or adjustments as needed. • Performs highly diversified duties to install and maintain production machines and the plant facility's equipment., • Performs scheduled maintenance repairs of production equipment during machine service, • Provides emergency/unscheduled repairs of production equipment, • Performs simple machinist duties and responsibilities, • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines, • Reads and interprets equipment manuals and work orders to perform required maintenance and service, • Diagnoses problems, replaces or repairs parts, tests and makes adjustments, • Performs regular preventive maintenance on machines, equipment, and plant facilities, • Performs a variety of plumbing maintenance and carpentry functions, • Uses a variety of hand and power tools, electric meters and material handling equipment in performing duties, • Detects faulty operations and defective material; reports those and any unusual situations to proper supervision, • Complies with safety regulations and maintains clean and orderly work areas Qualifications • Completion of a craft apprenticeship or an equivalent number of years of education and production maintenance experience preferred, • Successful completion and qualifying scoring on Ramsay Maintenance Skills Assessment, • 3 years of manufacturing experience; strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics), • Ability to work within an integrated operating enterprise, • Ability to manage priorities and multiple projects simultaneously, • Ability to perform calibrations, installation and maintenance of process and analytical instrumentation., • Ability to work a variable schedule, • Ability to read and interpret electrical schematics, • Must be able to walk and stand for a prolonged period of time, • Must be able to use hands, arms, and fingers to handle, feel, and reach, • Must be able to sit, stoop, kneel, crouch, or crawl, • Must be able to climb or balance, • Must be able to frequently lift and/or move up to 10 pounds, • Must be able to occasionally lift and/or move up to 50 pounds Vision Requirements • Close vision, • Distance vision, • Color vision, • Peripheral vision, • Depth perception, • Ability to adjust focus Working Conditions The Maintenance Technician position is located in a manufacturing environment, which includes: • Exposure to high temperatures, • Fumes or airborne particles, • Moving mechanical parts and vibration, • Loud noise level We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. #hpind #zr2 Pay Range Salary Range: USD $34.50/Hr. - USD $42.00/Hr.

ALPLA's Dayton, OH manufacturing site is looking for a Logistics Manager. ALPLA is a global family-owned, privately held company that makes innovative, customized, recycled packaging for top companies such as P&G, Unilever, L'Oréal, Pepsi, Henkel, Chobani and more. ALPLA values their employees, work-life balance, personal growth, compensation and sustainability. What Can You Expect From ALPLA • Health and Wellness Care Program- Benefits, • Child Care Benefits, • Dependent Care Cost Savings Program, • Recognition programs; Promotional opportunities, • 401K Retirement Plan and excellent Matching Plan, • Medical, dental, vision plan, • Education assistance program/tuition reimbursement, • Short term, long term and life insurance paid by ALPLA, • Paid vacation; paid holidays What You Will Enjoy Doing • Responsible for production planning and capacity analysis, • Responsible for inventory accuracy and reporting, • Manages the interface between the plant and the customer for forecasts and ordering input, • Works with customers to secure delivery service quality, • Maintains appropriate inventory levels for produced goods and raw materials, • Orders master batch and raw materials, • Records daily figures to compile month-end reports, • Manages warehousing and transportation, • Manages Logistics Department, • Recruits (with HR) new employees, • Develops/coaches team and performs disciplinary actions, • Oversees all training of the department, • Performs performance evaluations on a regular basis, • Ensures safe and efficient running of the department, • Keeps invoicing up-to-date, • Updates records and reports on a regular basis, • Data analysis: Synthesize data and analyze trends to support the Plant Manager What Makes You Great • Production Planning, • Inventory Accuracy, • Correct Shipment (correct quality/right time), • Min 2-year Degree (Associates) in related field or equivalent, 4-year degree, • 3 to 5 years of general logistics experience (production planning, • Qualifications/Skills:, • Excellent Computer skills (Excel, PowerPoint, Word), • Excellent Numerical skills, • Knowledge in using specific Logistics systems ALPLA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: ALPLA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at ALPLA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. ALPLA will not tolerate discrimination or harassment based on any of these characteristics. • Immigration sponsorship is not eligible for this role

Akkodis is seeking a Supply Chain Expeditor for a 6-month contract (Possible Extension) job with a client in Dayton, OH 45431 (Onsite). We’re hiring a Supply Chain Specialist II to support hardware development and prototype build teams. This role focuses on export compliance, international shipping, and logistics coordination in an R&D environment. If you have experience with export control (ECCN/EAR/ITAR), hardware logistics, and customs operations, I’d love to connect. Feel free to apply or message me for more details. Rate Range: $30/hour to $38/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Type: W2 Only, No C2C Candidate Education/Technical Requirements: • Strong ability to gain credibility and acceptance from supplier executives and operational teams, • Extensive experience in industrial diagnostics, • Advanced mastery of project management, supply chain methodologies, and Lean-Sigma tools, • High level of autonomy, particularly in international contexts, • Strong adaptability to countries, cultures, and environments, • Integrity and strong representation of the Client at supplier sites; strict adherence to safety and security regulations Roles and Responsibilities In this role, you will: • Deploy the recovery action plan aimed at restoring the on-time delivery performance of critical part numbers and exiting the crisis., • Implement relevant KPIs (adherence to commitments on critical items, overall delivery flow vs. demand, etc.)., • Ensure at least weekly communication of mandate deliverables to relevant stakeholders (SPM, PFF, RFF, others as applicable)., • Support the supplier and verify proper execution of the action plan and production plans for the portfolio of critical items. Ensure success conditions are met and escalate when necessary (material availability, on-time production launch, request for SPM support on supplier task steering if required, etc.)., • Ensure regular communication and reporting (daily or at a minimum weekly) with both the supplier and Client in accordance with kick-off agreements., • Ensure that, following corrective actions implemented during the mission, any remaining medium- or long-term actions are integrated into the SPM continuous improvement plan If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave, including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ___. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Job Description The Panther Group is seeking a Manufacturing Technician for an opportunity in the Kettering, OH area. This position supports production operations by operating computer-controlled laser machining equipment to process precision components in a manufacturing environment. The ideal candidate will have experience working in a production or manufacturing setting, strong attention to detail, and the ability to follow technical instructions and documentation. Responsibilities • Operate computer-based laser machining equipment to process components according to work instructions., • Review and interpret drawings, specifications, and process documentation., • Verify equipment status and system conditions prior to operation., • Inspect components to ensure quality and specification requirements are met., • Enter production or inspection data into company systems as required., • Support production team operations and collaborate with team members to meet production goals., • Train or assist other employees on production processes and equipment when requested., • Maintain a clean and safe work environment., • Follow all company safety procedures and manufacturing standards.Required Qualifications, • Minimum 1 year of experience in a manufacturing or production environment, • High School Diploma or GED, • Strong manual dexterity and ability to handle small components, • Ability to follow written and verbal work instructionsPreferred Qualifications, • Experience with automated or manual inspection equipment, • Familiarity with ISO quality systems, preferably within medical device manufacturing #INDENG #ZREng Company DescriptionWe are the experts in Human Capital. It starts with a commitment to personal attention. A single point of contact from day one. That's what makes The Panther Group different. That is how we deliver results to our clients and candidates. Our focus on quality, diversity and service sets us apart. At The Panther Group, it's about attention to detail. We attract the right talent, connect job seekers with the right jobs and provide the right custom solutions because we worry about the little things. Providing our clients the best value for their dollar, finding our job seekers opportunities where they can thrive, giving our clients and candidates the level of service they deserve, leveraging the most efficient processes in the industry.We are the experts in Human Capital. It starts with a commitment to personal attention. A single point of contact from day one. That's what makes The Panther Group different. That is how we deliver results to our clients and candidates. Our focus on quality, diversity and service sets us apart. At The Panther Group, it's about attention to detail. We attract the right talent, connect job seekers with the right jobs and provide the right custom solutions because we worry about the little things. Providing our clients the best value for their dollar, finding our job seekers opportunities where they can thrive, giving our clients and candidates the level of service they deserve, leveraging the most efficient processes in the industry.

Job DescriptionDescription: About Us Founded in 1972, FC Industries is a second-generation, family-owned company that has long been recognized as a leader in metal manufacturing. Over the past five decades, we’ve grown into a diversified metal manufacturing powerhouse—home to multiple subsidiaries—each contributing unique expertise to projects that shape our world. At Barsplice Products, our precision-engineered couplers and reinforcing systems strengthen some of the most recognizable structures in the nation. From bridges and skyscrapers to professional sports stadiums like those of the Cincinnati Reds—and even New York’s Freedom Tower—our products are literally helping to build America. AFCS is a trusted Tier One automotive supplier for leading brands such as Kia and Hyundai. Our expertise extends into components for Harley-Davidson motorcycles and frames for La-Z-Boy recliners. AFCS plays a vital role in delivering parts that move people — on the road, at home, and everywhere with a focus on continuous improvement, advanced manufacturing technologies, and strong partnership in between. Our FC Precision division is a leader in advanced tooling, aerospace, and Department of Defense manufacturing. From high-performance engine components to parts used in space exploration and government missions, our teams tackle complex, high-stakes projects with precision, and innovation. Across all our divisions, one thing remains constant—our people. We believe that great ideas come from every level of the organization, and our open, collaborative culture encourages everyone to make an impact. We invest heavily in state-of-the-art technology and the continued growth of our employees, ensuring we remain at the forefront of our industry. When you join FC Industries, you’re not just taking a job—you’re becoming part of a family that values quality, creativity, and teamwork. Together, we’re building something bigger: a future defined by craftsmanship, integrity, and the shared pride of knowing that what we make today helps shape the world of tomorrow. We’re seeking an experienced CNC Maintenance Technician who’s ready to join a company that truly values its people. At FC Industries, you’ll find a supportive culture, ongoing training, and endless opportunities to grow your career while working with cutting-edge technology and great people. Here are a Couple of Reasons why it is Great to Work at FC as a CNC Maintenance Technician: • Family/team culture that values communication and growth, • Heating and Air Conditioning in the whole building, including the shop, • Pay for school with 100% tuition reimbursement (books included!), • Ability to be home every night, • Weekly Paychecks, • 401k with competitive company matching, • Profit sharing, • Great Medical, dental, and vision insurance, • Life insurance paid by the company, • Immediate PTO and paid holidays, • On-site perks: café/convenience store, wellness coaching, and YMCA discount, • Other Corporate partner discounts through Verizon, Chrysler, GM, and more!, • Fun company culture: giveaways, drawings, picnics, parties, and employee appreciation events Essential Functions as a CNC Maintenance Technician: • Perform repairs to production machinery and CNC troubleshooting to maintain working order., • Report deficiencies in inventories of maintenance materials, supplies, and repair parts., • Complete required equipment/maintenance logs and records., • Ensure safety guards and personal protective equipment are utilized at all times., • Ensure compliance with company policies and procedures, quality standards, and follows work instructions. Your Success is our Success! Requirements: What It Takes to Succeed as a CNC Maintenance Technician: • Minimum of 5 years+ previous CNC maintenance experience in a production atmosphere., • Knowledge of basic mechanical, electrical, pneumatic, and electronic applications is a must, • Working knowledge of CNC Lathe and Milling Machines., • Able to read, write, and comprehend written and oral instructions., • Able to monitor machine sounds to identify and diagnose changes in order to take appropriate action. PI0c8b717bdd2c-25405-38880184

Now Hiring CNC Machinist Moraine, OH Pay Rate: $24.00 - $28.00 per hour Shift: 7 AM - 3:30 PM Machines Don't Lie. Neither Do Results. CNC Machinist jobs in Moraine for those who measure in microns, not guesses. Real work. Real pay. Real respect. CNC Machinist Skills & Requirements • High school diploma or GED required; machining coursework preferred., • 2+ years of experience setting up and running CNC machinery-Haas or Mazak experience a plus., • Strong blueprint reading and math skills for precision work., • Excellent attention to detail and safety. What You Get: • Solid Weekly Pay. On time, no bull., • Good Benefits. Health, dental, vision, life, disability - the real stuff., • Optional 401(k). Save while you work., • Safety First. We don't mess around. If precision's your thing, we've got a machine with your name on it. Apply Now. Join a Team That Works for You At Staffmark, we're more than just a staffing company-we're your career partner. As part of RGF Staffing and Recruit Group, anHR powerhouse behind big names like Indeed and Glassdoor, we've got the muscle and the know-how to get you where you want to go. With more than half a century of experience and a track record of putting hundreds of thousands of people to work every year, we've got your back. Whether you're looking to level up, switch gears, or just get to work fast, we make it happen. Join us and experience the advantage of working with a trusted name in recruiting-because your success is our success. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Job DescriptionDRT Manufacturing, LLC is a leader in the precision machining industry and provides quality components and superior support. This highly skilled workforce utilizes innovative technology and sophisticated systems to produce high quality parts. If you enjoy a dynamic, growing, and challenging workplace– DRT is just what you are looking for. We are currently seeking candidates for our Dayton, Ohio location for: Surface Grinders - 1st, 2nd and 3rd Shifts available Flexible Schedules- Off Shift Incentives 15% shift differential - Benefits start Day One! Requirements: • Sets up and operate machines to grind parts to blueprint specifications., • Fills out production paperwork and inspection procedures as required., • Reports any problems or discrepancies to immediate supervisor., • Maintains tools, gages and equipment in a clean, orderly and safe manner., • Observes overall operation and performs regular daily maintenance on equipment and work area., • Complies with company policies and procedures giving special attention to safety, quality, and attendance, • Willingness and capacity to learn more skills, including but not limited to CNC operation., • Follows blueprints, job orders and written or verbal instructions for product specifications such as finishes, dimensions, tolerances and understands which grinding wheels to be used for different materials., • Dresses wheels to specifications using dressing appropriate techniques. DRT is a dynamic and growing organization that offers competitive compensation and excellent benefits including PTO and MEDICAL COVERAGE FROM DAY ONE! In addition to dental insurance, disability and (voluntary) life insurances, we offer a 401k with company match and Discretionary Bonus Incentive eligibility. DRT is An Equal Opportunity Employer

Machining Engineering Manager (Swiss) Dayton, OH Lead a high-performing team of tenured engineers in a pristine Swiss CNC facility that offers the rare combination of decades-long stability, cutting-edge technology investment, and a true 40–45 hour workweek! Elite Leadership & Team Synergy: Lead a highly skilled team of tenured Swiss CNC engineers and tradespeople who operate as a true unit. With an average staff tenure of 10+ years, you'll be managing a group that values collaboration and mutual support. Be the Site's Swiss CNC Authority: Step in as the go-to technical expert for the area. You will leverage your deep Swiss CNC machining background to drive excellence on a shop floor widely known for being so clean that "you could eat off of it." Multi-Million Dollar Growth & Modernization: Be responsible for a specialized area of the site that combines decades of stability with a recent multi-million dollar investment in cutting-edge machining centers. We are an established firm poised for a massive new business phase, and we want you to lead that momentum! Management with True Balance: Lead at a high level without sacrificing your personal life. We offer a consistent 40–45-hour workweek and virtually no weekends. Comprehensive Executive Rewards: We value your leadership with a package that includes affordable medical/dental/vision, a competitive 401K match, and significant annual bonus potential. Profitable, leading machining manufacturer with a diverse business mix is hiring a Machining Engineering Manager (Swiss) to lead the engineering and skilled trades team in a premier, competitive, cutting edge technology Swiss CNC machining environment. The Machining Engineering Manager (Swiss) will report to a Sr. Engineering Manager to support machining and other processes. Responsibilities will include: • Coach, mentor and develop a team of engineers and skilled trades professionals, • Supply Swiss CNC machining expertise to the staff and facility, • Participate in weekly quoting meetings to determine fit and manufacturability for Swiss CNC engineering projects, • Read and interpret blueprints, as well as GD&T, • Assign CNC machining jobs to staff and monitor timely completion, • Provide status updates to operations, sales and engineering teams, • Initiate training to production associates for new and existing projects, • Assist Swiss CNC team with troubleshooting programming and offering guidance, • Partner with production when needed to troubleshoot process and manufacturability issues, • Manager tooling and CapEx projects, including overseeing timelines and budgets, • Complete cost justification, ROI analysis, and obtain quotes, • Other duties as directed by engineering management This is a leadership role that requires qualified candidates to be on the manufacturing floor up to 25% of their day and have the ability to wear many hats. Candidates should have strong Swiss CNC machining technical skills and the ability to coach and mentor others, support and foster a team-oriented environment and the desire to develop the staff. This site offers the opportunity to work with cutting edge equipment and robotics in a growth focused environment. The company offers a three tier competitive medical benefit package (including dental and vision) available on the 31st day of employment, 401K (50% up to 4%), paid holidays and vacation, tuition reimbursement, life insurance and an annual bonus potential! REQUIREMENTS for the Machining Engineering Manager (Swiss) : • Minimum of a high school diploma or GED, • Extensive Swiss CNC machining experience, at least 10 years total and 1-2 years in a lead engineering position, • Swiss CNC programming experience, at least 2-3 years, • Working knowledge of metrology tools, including calipers, gauges, micrometers, etc., • Working knowledge of GD&T, • The ability to read blueprints, • Experience working in a QMS regulated environment, such as IATF 16949, ISO 9001, ISO 13485, etc., • Microsoft Office Skills preferred but NOT required: • Automated work environments, including robotic technologies, • Mechanical aptitude, • Quoting experience, • SolidWorks and/or PartMaker CAM Software Reasons to work for this organization: ?? Medical, dental and vision – GREAT medical perks available on the 31st day of employment ?? Diverse business mix ?? Opportunity to work with cutting edge machining technology ?? Opportunity for customer interaction ?? Annual bonus potential ?? Excellent work/life balance, with very rare weekends ?? Updated office space in a bright working environment Candidates are preferred to be local to the Dayton, OH area. There is a conservative relocation package available for regional candidates who meet all of the requirements.

POSITION SUMMARY Sells products for MATHESON to business and industrial establishments or individuals at sales office, store, showroom or customer's place of business by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Compiles lists of prospective customers for use as sales leads, based on information from newspapers, business directories, industry ads, trade shows, Internet Web sites, and other sources. Travels throughout assigned territory to call on regular and prospective customers to solicit orders or talks with customers on sales floor or by phone. Displays or demonstrates product, using samples or catalog, and emphasizes salable features. Quotes prices and credit terms and prepares sales contracts for orders obtained. Estimates date of delivery to customer, based on knowledge of own firm's production and delivery schedules. Prepares reports of business transactions and keeps expense accounts. Works with inside sales and route sales representatives to keep account activities and literature up to date. Coordinates customer training. Enters new customer data and other sales data for current customers into computer database. Develops and maintains relationships with purchasing contacts. Investigates and resolves customer problems with welding processes, equipment and deliveries. Attends trade shows. Performs inside sales when needed. Assists with semi-annual inventories. Assists co-workers and customers with technical welding questions. Assists in collecting outstanding account balances. Perform other projects and duties as assigned. HOURS OF WORK: This is a full-time position with travel requirements. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedural manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers, clients, vendors, managers or employees of organization. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS Valid Driver's License Hazardous materials training and certification EDUCATION and/or EXPERIENCE Associate's degree in Welding Technology or related field from two-year college or technical school; Six months to one year related experience and/or training or; Equivalent combination of education and experience. TRAVEL Frequent travel, including overnight travel, is an essential job function PHYSICAL/MENTAL DEMANDS/WORKING CONDITIONS Stationary Position - frequently Move/Traverse - frequently Transport/Lifting - rarely Transport/Carrying - rarely Exerting Force/Pushing - rarely Exerting Force/Pulling - rarely Ascend/Descend - occasionally Balancing - occasionally Position Self/Stooping - occasionally Position Self/Kneeling - occasionally Position Self/Crouching - occasionally Position Self/Crawling -occasionally Reaching - occasionally Handling -occasionally Grasping - occasionally Feeling - occasionally Communicate/Talking - constantly Communicate/Hearing - constantly Repetitive Motions - frequently Coordination -frequently Comprehension -frequently Organization - frequently Reasoning & decision - frequently Communication - constantly Resilience - frequently The Company is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability Apply NowShare Save Job

Earl Enterprise - - Responsibilities: The Prep Cook plans, preps, sets up and provides quality service in all areas of food production for menu items and specials in designated outlets in accordance with company standards. Maintains organization, cleanliness, and sanitation of work areas and equipm

$500 new hire Incentive Start a new career with us. Taylor Corporation is a growing, dynamic company with big plans for the future - and our people. Family owned and proud of it, we power our employees' potential and strive to create opportunity and security for every member of the team. We're passionate about our work, we believe there is always a better way, and we're in this for the long haul. Ready to build a career? It's time to look at Taylor. Your Opportunity: Taylor Corporation is looking for an Equipment Operator III. In this role, you will operate equipment used to mix chemical batches in accordance with production specifications and company quality standards. This position requires careful adherence to mix sheets, accurate measurements, and completion of required quality checks before product moves forward in the process. Work Authorization: To be considered for the Taylor opportunities, candidates must be authorized to work in the United States without the need for employer sponsorship. Your Responsibilities: • Operate equipment used to mix chemical batches., • Follow mix sheets and chemical recipes exactly as written., • Measure materials accurately according to specifications., • Perform required quality checks prior to releasing product to the next stage of production., • Work primarily with non-hazardous chemicals., • Maintain knowledge of and comply with safety requirements related to the job and equipment. Your Shift: Part Time starting at 8:00 am with 4-6 hour shifts - Monday - Friday when needed. 20-25 hours You Must Have: • Basic mechanical aptitude., • Ability to read and follow written instructions and chemical mix sheets., • Strong attention to detail, particularly with measurements and quality checks., • Comfort working in a production environment., • Willingness to learn and take direction., • Ability to lift 40+ pounds. Requirements Within This Position: • Ability to communicate and exchange accurate information and ideas so others will understand., • Regularly required to remain in a stationary position., • Constantly operates machinery and handles products including production materials., • Frequently required to move inside the facility., • Regularly move up to 40+ pounds (lift, push, pull and/or carry). We Would Also Prefer: • Prior experience operating mixing or batch equipment in a manufacturing environment. About Taylor Corporation One of the largest graphics communications firms in North America, Taylor's family of companies provide a diverse set of products, services, and technologies addressing the toughest communication challenges. For nearly 50 years, Taylor has been a premier provider of powerful and innovative products, services, and expertise for individuals, businesses, and distributors large and small. Our 10,000+ employees spanning 26 states and seven countries work diligently to create the interactive, printing, and marketing solutions that have helped build some of the world's more recognizable brands. Everything we do begins with identifying the unique priorities and needs of our customers and creating one-of-a-kind solutions. We offer a comprehensive benefit package including several health plans to choose from, dental, vision, wellness programs, life and disability coverage, flexible spending accounts, health savings accounts, 401(k) plan with company match, paid time off (PTO) and 64 hours of annual holiday pay. The Employer retains the right to change or assign other duties to this position. Taylor Corporation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Taylor Corporation including all partners and affiliates is an Equal Opportunity Employer/Veterans/Disabled.

Aerobraze, a division of Wall Colmonoy manufactures turbine engine components like turbine nozzles, turbine vanes, complete turbine engines (both manufacturing and repair), diffusers, honeycomb seals and segments, heat shields, and parts for various turbomachinery. Our 90,000-square foot facility located in Cincinnati, Ohio houses a dedicated team of 50+ highly skilled professionals and constantly expands its production capabilities. Our products are globally shipped to customers far and wide. As our, Furnace Operator you'll have the opportunity to help shape the future of our company and make a lasting impact on our success. Primary Responsibilities: • Control and monitor heat treat furnaces while following written instructions., • Prepare parts for processing; load and unload furnaces, fixtures, baskets, etc, • Ability to troubleshoot unexpected issues and/or notify supervisor., • Practice and promote safety and good housekeeping. Minimum Qualifications and Attributes:, • High School degree or equivalent, • Minimum of 5-year professional work experience and/or training preferred., • Minimum 1 year of experience operating a vacuum furnace for heat treat preferred., • Knowledge of heat treating processes preferred., • Forklift certification is a plus. If you are a driven and experienced Furnace Operator with a passion for aerospace and defense manufacturing, we encourage you to apply for this exciting opportunity. We offer competitive salary and an excellent benefit package that includes medical, vision, dental, life, AD&D, and 401k match. Wall Colmonoy is an equal opportunity employer encouraging individuals with disabilities and veterans to apply.

Taylor Corporation isa dynamic, diversified companywith bigplans for the future-andyour career. We power our employees' potential and strive to create opportunity and security for every member of the team. If you're ready for something bigger-more challenge, more variety, more pathways for professional growth-we should talk.We're passionate about ourwork, we believe there is always a better way, and we'relooking for people like you. Ready toreach your potential? It's time to look at Taylor. Your Opportunity: Taylor Promotional Products, a division of Taylor Corporation,is looking for a Promo Sales Account Manager to join their team! Work Authorization:To be considered for the Taylor opportunities, candidates mustbe authorized towork in the United States without the need for employer sponsorship. Your Responsibilities: • Manage a portfolio oftop tierclient accounts, serving as the primary point of contact for allpromotional merchandisesales, • Track sales activity and pipeline updates in Monday.com, • Achieve growth targets as set forth by Taylor Promotional Products management, • Collaborate with internal teams to ensure timely and high-quality delivery of products, • Conduct regular client meetings, presentations and product demonstrations to drive engagement and sales, • Stay current on industry trends, build and maintain relationships with key suppliers, • Maintain all responsibilities in the areas of business development, ideation, quoting and financials in a fast-paced environment Business Development: • Develop and execute strategic account plans to increase revenue, drive product adoption, and maximize client satisfaction, • Penetrate client buying groups / departments and develop new programs for revenue growth, • Support and participate in client business reviews preparing relative data and information, • Online storefront merchandising and management (ideation, costing, pricing, plating), • Online and offline promotions, • Marketing calendar management (client events, initiatives, days of observance), • Develop online pop-up store opportunities to support client needs Ideation and Quoting: • Promotional merchandise apparel and hardgoodsexpert, • Ideation, costing and building PowerPoint/ Canvadecks for larger spend opportunities, • Inventory costing / replacement ideation, • Work with Taylor Agency for higher level impact merchandising and presentation development as needed, • Quote presentation + follow-up with client, • Lead kitting projects opportunities and work with internal departments for costing Financials: • Achieve client revenue growth targets, • Maintain client profit margin targets, • Monitor any client inventory to remain current and develop plans to sell and/or invoice for any aged product You Must Have: • 5+ years of sales experience, preferably in promotional merchandise including branded apparel, • 2+ years of account management and/or customer service experience, • Proven track record of achieving or exceeding sales targets, • Strong communication, negotiation, and relationship-building skills, • Ability to manage multiple accounts simultaneously while maintaining high service standards, • Proficiency with CRM systems and Microsoft Office Suite, • Detail-oriented, organized and self-motivated, • Strong leadership and team-building skills with the ability to motivate and inspire We Would Also Prefer: • Bachelor's degree in business, marketing or a related field., • Experience with apparel decoration methods and applications, • Knowledge of production processes and pricing strategies The anticipated annual salary range for this position is $55,000 - $70,000 plus the eligibility to earn commission. The actual base salary offered depends on a variety of factors, which may include as applicable, the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The range listed is just one component of Taylor Corporation's total compensation and benefits package for employee. About Taylor Corporation One of the largest print and communications firms in North America, Taylor's family of companies provides a diverse set of products, services and technologies that address the toughest business challenges. We work diligently each day to create printed and digital marketing communication solutions that help power many of the world's most recognizable brands. With more than 50 years of categoryexpertiseand10,000 employeesspanning dozens of U.S. states and multiple countries, Taylor serves businesses and distributors both large and small. Our employees enjoy a comprehensive benefit package including a choice of several health plans, dental, vision, wellness programs, life and disability coverage, flexible spending accounts, health savings accounts, a 401(k) plan with company match, paid time off (PTO) and64 hoursof annual holiday pay. The Employer retains the right to change or assign other duties to this position. Taylor Corporation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Taylor Corporation including all partners and affiliates is an Equal Opportunity Employer/Veterans/Disabled.