Shop jobs in Des Moines, Iowa - Page 2Create job alerts

Job Description Job Title: Demolition Laborer Job Description The Demolition Technician performs general interior and exterior site cleanup and supports demolition crews on a variety of construction and environmental remediation projects. This role involves moving and disposing of materials, maintaining a clean and safe job site, and working long days in outdoor conditions. The position requires strong physical stamina, reliability, and the ability to work early mornings, extended hours, and occasional out-of-town projects. Responsibilities • Perform general interior and exterior site cleanup after demolition work has been completed., • Load broken concrete and other debris into wheelbarrows and safely transport materials to dumpsters or designated disposal areas., • Haul, dispose of, and organize materials to keep work areas clear, safe, and efficient., • Sweep, vacuum, and remove dust and debris from job sites to maintain a clean working environment., • Assist demolition crews with interior and structural demolition tasks as directed., • Work upright and on your feet in various weather conditions for 8–12 hours per day., • Follow all safety procedures and use provided personal protective equipment (PPE) correctly., • Report to the shop each morning at the designated time to join your assigned crew., • Travel in a crew vehicle from the shop to job sites and back at the end of each workday., • Work as part of a crew of approximately 5–8 people under the direction of a foreman., • Adapt to changing job sites, moving between different projects based on workload and business needs., • Participate in out-of-town projects when required, including occasional overnight stays., • Maintain excellent attendance and punctuality; arrive at the shop ready to work by the required start time., • Lift, carry, push, and pull heavy materials and equipment safely, using proper lifting techniques., • At least 6 months of experience in construction, physical labor, or demolition., • Ability to perform physically demanding work, including lifting, pushing, and pulling 50 pounds regularly and up to 100 pounds when needed., • Ability to remain upright and on your feet for 8–12 hours per day in various elements., • Reliability and punctuality, with the ability to arrive at the shop by approximately 6:45 a.m. each workday., • Willingness and availability to work Monday through Friday and Saturdays as needed., • Flexibility to work extended hours, including potential shifts from approximately 7:00 a.m. to 7:00 p.m. on weekdays., • Comfort working in construction and demolition environments, including dust, debris, and outdoor conditions., • Ability to follow instructions, safety guidelines, and site procedures accurately., • Team-oriented mindset with the ability to work cooperatively in a small crew., • Previous experience in demolition, construction, landscaping, or similar labor-intensive roles., • Familiarity with using wheelbarrows and basic hand tools in a construction or demolition setting., • Experience working on multiple job sites or projects simultaneously., • Willingness to travel for out-of-town projects, including staying overnight during the week when required., • Ability to adapt quickly to changing work locations and project priorities., • Strong work ethic and a track record of consistent attendance. This is a Contract to Hire position based out of Des Moines, IA. Pay and Benefits The pay range for this position is $16.00 - $16.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: Tri-City Group is currently seeking an Electrical Fabricator to work in our prefabrication shop located in Des Moines, Ia. This position is responsible for supporting all divisions within Tri-City Group, creating components, and fabricating structures for various projects. Essential Duties & Responsibilities: • Measure, cut, assemble, and weld materials with precision using basic construction math and fabrication drawings, blueprints, sketches, or other specifications, • Operate power tools/equipment, including:, • Vertical and horizontal band saws, • Grinders, • Drill presses, • Hand and portable power tools, • Meet strict production and delivery schedules for fabricated components, • Communicate effectively and work collaboratively with shop personnel, supervisors, and other departments, • Assist with material handling and staging; forklift operation preferred, • Adapt to changing priorities and take on a variety of fabrication tasks as needed Required Skills & Qualifications: • Ability to read blueprints with experience utilizing Bluebeam or Adobe - Required, • Tape measure and steel-toed boots- Required (we provide all other tools/equipment/safety gear), • Welding experience (steel, stainless steel, aluminum) preferred but not required, • Familiarity or experience with shop tools and fabrication equipment (Hydraulic brake/shears), • Maintain a clean, organized, and efficient workspace, • Attention to detail and commitment to quality workmanship, • Follow all company safety policies and OSHA requirements at all times, • Dependable, punctual, and reliable All job offers are contingent upon successful completion of a drug screen and background check. Tri-City Group is an equal-opportunity employer.

Job DescriptionSalary: Tri-City Group is seeking a Solar PV Engineer/Estimator for openings in Des Moines, IA. The Solar PV Engineer/Estimator will be responsible for preparing detailed estimates for Solar PV projects. Responsibilities include but are not limited to: • Contract Administration, • Attending pre-bid meetings to determine the scope of work and required contents of projects, • Reviewing proposed specifications and drawings to determine the scope of work and required contents of estimate; gathering quotes, printing drawings, counting, take-off estimating, and responding to RFIs and RFQs, • Professionally interacting with customers, other trades, general contractors, and internal staff, • Providing Construction Services with up-to-date CAD drawings; assisting with the assembly of shop drawings as per project requirements, • Providing technical assistance, i.e. interpretation of drawings, recommending construction methods and equipment, etc., as required, • Participating as a team in calling and selling customers on potential project, • Performing additional assignments per managements direction Qualified candidates will be a NABCEP Certified Installation Professionals and have experience in Solar Electric Systems and management. Candidates must possess strong attention to detail, focus on accuracy, solid communication skills, positive initiative and judgment, the ability to problem solve and meet deadlines and the ability to multitask with tact and consideration. All job offers are contingent upon successfully completing a drug screen and reference check. Tri-City Group is an equal opportunity employer.

Job Description Class A CDL - Regional & OTR Company Drivers We Show Our Drivers We Care Great Pay, Full Benefits & Bonuses! Nebraska Atlantic Transportation, Inc. is a family-owned & operated company that has been in business for over 30 years. It is our goal to make you feel like you are part of the family and are treated as such. High miles and good pay are what we strive to provide our drivers. We offer an in-house mechanic shop, weigh scale & fuel tank, and our drivers’ lounge features a rec room with a pool table, mounted TVs, a separate TV room, washer & dryer, a full kitchen, and furnished bedrooms. Call or apply and join our family today! We also hire Owner Operator drivers: $1.35 per mile plus fuel surcharge; Free Base License after 6 months of continuous service; Extra pick-up/delivery: Outhaul: $50 / Backhaul: $25 Pay & Benefits • $0.60 Per Mile, • Cell Phone Reimbursements, • Unloading Paid in Full, • Extra Stop: $20 backhaul / $40 outhaul, • Yearly Bonuses, • Full Health Insurance, • Full Life Insurance, • Home Weekly, • Driver Apartment w/Washer & Dryer, Stocked Kitchen, Large Screen TVs & Pool Table Requirements • CDL-A, • 24 years old minimum, • Two years OTR experience

Potbelly Sandwich Shop - - Responsibilities: Lead shift by supervising and developing associates to deliver quality food and customer service; Manage and organize the line and delegate duties to associates; Provide feedback and training to staff on shifts; Promote sales by executing the marketing p

Work for THE insurance defense firm of the Southeast. Partner track associate role. This Jobot Job is hosted by: Farrell Ougheltree Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $160,000 per year A bit about us: Our client is a growing, highly-respected regional insurance defense firm with over 20 offices on the East Coast. They pride themselves on being the go-to shop for the insurance industry, their insureds and self-insureds. They are over 300 attorneys. They have big firm benefits and technology but also the local partners are empowered to make the best decisions for their specific offices. They are proud to mentor associates and partnership is a reality at this firm. Why join us? • PTO, • Health insurance, • 401k, • STD/LTD, • Paid parental leave, • Mentorship program, • Competitive bonus structure Job Details Job Details: We are currently seeking an Insurance Defense Litigation Associate to join our dynamic team. This is an exhilarating opportunity for a motivated, detail-oriented individual to showcase their skills in a fast-paced, high-stakes environment. The successful candidate will have the opportunity to work on a diverse range of cases, providing them with broad exposure and experience in the legal industry. This role requires a strong commitment to our clients, a deep understanding of the legal process, and an unwavering dedication to achieving the best possible outcomes. Responsibilities: As a Litigation Associate, you will be expected to: 1. Manage all aspects of the litigation process from investigation, pleadings, and discovery to pre-trial, trial, settlement, and appeal., 2. Develop and implement litigation strategies, conduct effective legal research, and draft compelling legal documents., 3. Represent clients in court and at depositions, mediations, and arbitration proceedings., 4. Provide legal advice to clients and advise them on their rights and obligations., 5. Collaborate with a team of attorneys to develop defense strategies, while also working independently on various cases., 6. Stay abreast of current legal trends and updates in insurance defense litigation., 7. Maintain strict confidentiality and professionalism at all times. Qualifications: The ideal candidate for the Litigation Associate role will have: 1. A J.D. degree from an accredited law school and an active member in good standing of the New York bar., 2. A minimum of 2+ years of litigation experience, preferably in insurance defense., 3. Proven experience in handling depositions, arbitrations, and trials., 4. Excellent communication, negotiation, and advocacy skills., 5. Strong analytical and problem-solving abilities, with a keen eye for detail., 6. Proficiency in legal research tools and software., 7. Ability to manage a high volume of cases and work under pressure to meet deadlines., 8. Demonstrated commitment to professional ethics and client confidentiality. This is a thrilling opportunity for a legal professional who is ready to take their career to the next level. If you're passionate about litigation, have a proven track record in insurance defense, and are ready to take on a challenging yet rewarding role, we encourage you to apply. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Are you highly motivated, hard-working, and seeking to join a growth-focused consulting & engineering firm? Are you looking for a company that will invest in your development and grow your professional skills? If so, consider a career with Apex! Powered by record sales, extraordinary client retention, strategic acquisitions, and an entrepreneurial spirit, Apex Companies is one of the fastest growing engineering and environmental consulting firms in the US. We were recently recognized by the Zweig Group as one of the fastest growing firms in the AEC industry. We take pride in providing our clients with exceptional service and have earned numerous awards for project excellence. We continue to grow, and we want you to grow with us. Position: Landscape Technician (Stormwater) Location: Urbandale, IA Compensation: $19.00 - $21.00 per hour, depending on experience Schedule: Full Time, 40-55 hours per week (Monday-Friday, overtime opportunities) Regional Travel: Required, typically 10-15 days per month (lodging and $55 per diem on travel days) We're hiring a Landscape Technician (Stormwater) to support the maintenance of stormwater infrastructure on commercial properties. This role is ideal for individuals with experience in landscaping, lawn care, construction, or groundskeeping, and for those who enjoy working outdoors and take pride in hands-on work! Why you'll love being on the Apex team: • Multiple Ways to Earn: Enjoy weekly pay, per diem, overtime opportunities, and performance-based annual raises., • Comprehensive Benefits: Access subsidized medical, dental, and vision coverage, plus company-paid life insurance, optional disability plans, and a 401(k) with company match., • Time Off: Receive 15 days of paid time off each year, along with 9 paid company holidays., • Long-Term Career Opportunities: Build a lasting career with Apex, supported by tuition assistance and ongoing professional development., • Routine landscape maintenance and light repairs of stormwater systems and infrastructure (retention ponds, detention basins, drainage ditches, stormwater grates, and other stormwater assets), • Perform mowing, weed-trimming, debris removal, ground maintenance and cleanup, light construction, and maintenance repairs for client properties., • Operate landscaping and light construction equipment., • 1-2+ years of experience with manual labor, outdoor experience preferred., • Solid understanding of landscaping equipment and materials preferred., • Willingness to travel locally and regionally required. 10-15 days per month is typical (Monday-Friday)., • Due to DOT interstate transportation requirements, employees must meet the minimum requirement of 21 years of age., • Valid driver's license, safe driving record, and a reliable method of transportation required., • Candidates must pass a pre-employment background check, motor vehicle record check, and drug screening. We are a drug-free workplace. Hourly Expected Pay Range$19—$21 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job DescriptionJob Title: Structural Welder Job Description Join our team as a 3rd Shift Fabricator, where you will build and weld structural steel products such as columns, beams, and stairs according to blueprints. You will work with various materials, shaping and welding them to ensure they meet quality standards and are ready for installation. Responsibilities • Read and interpret blueprints for building structural steel products., • Review the quality of work and ensure structures are ready for installation., • Cut, size, shape, and bend materials, tack them into place, and weld them., • Ensure stairs or handles are prepared for job site arrival.Essential Skills, • Proficiency in structural welding and MIG welding., • Experience in fabrication and reading blueprints., • Attention to detail and quality control skills., • Ability to work effectively in a team and growth-oriented environment.Additional Skills & Qualifications, • 2+ years' experience in MIG welding or iron workers union welding., • Union welding experience preferred., • Ability to pass written Weld and Blueprint tests., • AWS and AISC Manufacturing experience would be advantageous., • Ability to read angles and use a tape measure accurately.Why Work Here? Our company offers competitive health benefits and is employee-owned, allowing team members to earn stock based on years of service. Vacation time is front-loaded after 60 days of employment, and we host food trucks twice a month, providing lunch at no cost. Employees receive regular pay increases and have the potential for yearly wage reviews. Additionally, we offer a Scheduling Attainment Bonus based on production schedule achievements. Work Environment This is a fully on-site position in a fabrication shop environment, which can be dirty. Personal protective equipment such as jeans, work-appropriate shirts, steel-toed boots, weld helmets, and safety glasses are required. The location is small, with 15-20 people, but there are plans to move to a larger site, offering future leadership opportunities. The ideal candidate will align with the company's culture, environment, and effort requirements. Work shifts are 3rd shift Monday to Thursday from 6pm to 6am, with first shift Monday to Friday from 6am to 2:30pm or until the work is done. Job Type & Location This is a Contract to Hire position based out of Carlisle, IA. Pay and Benefits The pay range for this position is $26.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionAbout Us Bob Brown Chevrolet, headquartered in Urbandale, Iowa is in search of Skilled Service Technicians looking to become more than just a number. We are a third generation family, owned and operated. With more than 63 years in the automotive business, the Brown family prides ourselves on high employee retention, and an all around great place to work. With our redesigned an upgraded service department, featuring a Climate Controlled Shop, In-ground Lifts, and 20,000 pound lifts, we have the capability to work on medium duty trucks and RV's; we can service nearly all vehicle service types. We are looking for Service Technicians to join our growing team! The right candidates will have a strong service technician background and ASE certifications. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. Looking to relocate? We can help and will offer relocation assistance to the right candidates. From the famous Downtown Farmer's Market, the Famous Iowa State Fair, some of the best schools in the country, a booming economy, a reputation as a great place to raise a family, friendly people, low crime rates, affordable homes, the Des Moines metro is on of the most coveted places in the county. COMPENSATION • Flat rate hourly compensation, based on experience, training, and proficiency., • Participation, with dealer match, in the GM Tech Excellence Bonus Program. Potential of $12,000 annually and up to 250,000 GM rewards points valued at an additional $2,500. BENEFITS • Competitive market wages for all skill and training levels., • We encourage professional development and continued growth and offer paid training to enhance your skill sets., • Paid Time Off, • 40 Hour Work Week, • Factory Backed Incentive Retention Plan, • Medical Insurance, • Prescription Insurance, • Dental Insurance, • Vision Insurance, • Life & AD&D Insurance, • Short-term and Long-Term Disability Insurance, • Cancer/Accident/Critical Illness Coverage, • Medical Flexible Spending Account, • Dependent Care Spending Account, • Employee Assistance Program, • 401k Plan with Company match, • Employee Discounts Job Requirements, • Perform work specified on the repair order with efficiency and in accordance with dealership policies., • Inspect and test-drive vehicles to ensure vehicles run smoothly and safely., • Execute repairs under warranty to manufacturer specifications., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs, • Communicate directly with Service Advisors and all necessary parties to ensure that customers receive exceptional service., • Diagnose, maintain, and repair automotive systems and components., • Complete required factory and dealership training., • Install equipment as specified by the customer or company., • Assist and mentor junior technicians when needed., • Use shop supplies and materials in a practical and economic manner., • Maintain a professional and clean workspace., • Report to management any situation or condition that jeopardized the safety, welfare, or integrity of the dealership, its personnel, or customers., • High school diploma or equivalent, ASE Certification required., • B level qualifications, including Diagnostic, Electrical and Engine Repair. Qualifications • 2+ years of Service Technician experience preferred., • High school diploma or equivalent, ASE Certification required., • B level qualifications, including Diagnostic, Electrical and Engine Repair., • Dexterity, requiring a steady hand, excellent hand-eye coordination., • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment., • Excellent customer service skills and basic computer competencies., • Positive, friendly attitude, along with an eagerness to improve., • Enjoy working in a dynamic environment., • Must have a strong worth ethic and be a team player., • Teammate with ability to collaborate with others effectively., • Ability to learn new technology, repair and service procedures and specifications., • Valid driver's license and clean driving record., • Must be 18 years of age or older with a valid Driver's License. Company Blurb We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionAt R&R Realty Group, we don’t just develop buildings—we shape the places where people work, shop, and live. As the premier commercial real estate company in Des Moines, Iowa, we bring more than 40 years of experience and over 11 million square feet of office, retail, multifamily, and industrial space across Iowa and Nebraska. We’re a collaborative, forward-thinking team that takes pride in our work, our relationships, and our values. With land positioned for future development and a strong vision for what’s next, it’s an exciting time to join R&R. If you’re motivated by making a real impact and working alongside people who genuinely care, you’ll feel right at home here.What You’ll Do As our Architectural Manager, you’ll play a key role in shaping R&R’s built environment—from early visioning through construction. You’ll lead design efforts, collaborate across teams, and ensure projects meet the highest standards of quality, compliance, and creativity. Key responsibilities include: • Lead architectural design efforts across capital projects and tenant improvements—from early visioning through construction documentation, • Collaborate with internal teams and stakeholders to translate business goals into functional, well-designed spaces, • Provide design direction and mentorship to our in-house interior design team (Spark Design), • Partner with development, pre-construction, and brokerage teams to prioritize and execute projects, • Oversee and coordinate external architects, engineers, and consultants to ensure quality and consistency, • Review drawings, specifications, and project documentation to maintain high design and construction standards, • Serve as a resource on building codes, design best practices, and quality control, • Participate in design charrettes and contribute to build-to-suit and development opportunities, • Stay current on workplace and commercial design trends and bring forward new ideas and concepts, • Visit project sites and R&R properties as needed to support project successWhat Makes This Role Unique, • End-to-end project involvement – See your designs come to life from concept through completion, • Portfolio-wide impact – Influence a wide range of commercial properties and development projects, • Collaborative environment – Work cross-functionally with a highly engaged internal team, • Opportunity to lead – Guide and grow an in-house design functionWhat It Takes to Join Our Team, • Bachelor’s degree in Architecture from an accredited program, • Licensed Architect (or ability to obtain licensure with company support), • Experience leading or contributing to commercial architectural projects

Job Description Job Summary: Position is responsible for directing the activities of construction crews and for supervising construction projects on a daily basis. Duties include: initiating, carrying out, monitoring and assigning work to crews; working alongside crew members when needed; keeping jobs on schedule; performing inspections; training employees and providing technical advice to crews; evaluating employee performance and attendance, completing daily paperwork and approving time-cards. Superintendent II is the party responsible for communicating with owner/customers, project manager, architects, engineers, and subcontractors. Assist in resolving safety issues and ensuring jobsites are in OSHA compliance. Responsible for supporting and promoting DSC culture through effective Leadership, Management, and Accountability (LMA). Enforcing company general and safety policies. The Superintendent II is the sixth level of an eight-level construction series. Supervisory Responsibilities: • Supervise crews and subcontractors. Duties/Responsibilities: • Has successfully completed several multi-million-dollar projects, • Is capable of running projects of increased complexity with DSC crews in excess of 10, • Works closely with project engineer on site to assist in correction of shop drawings, • Responsible for day-to-day management of a construction project; studies specifications and coordinates with project managers to plan procedures for construction on basis of project schedule and staffing requirements for each phase of construction, based on knowledge of available tools, equipment, subcontractor’s scope of work and various building methods. Develops three week look ahead schedules., • Supervises day-to-day operations of construction crews to include: recommendations on staffing levels; coordinating crew members and subcontractors; delegating work, ensuring adequate staffing; ensuring that crews have the required materials and equipment, that work conforms to specifications and that construction schedules are adhered to; and, informing the project manager of any scheduling or cost issues., • Works in the field with crew members to make sure that quality work is done in an efficient manner in order to keep the project on schedule and under budget; serves as a hands-on resource for the crew at all times by being available for questions, discussion, and demonstration; maintains a positive enthusiastic attitude to motivate crew to increase productivity., • Inspecting project to ensure proper layout of building including survey and double check all subs for correct layout (under floor plumbing, wall layouts, etc.)., • Supervises employees including: making hiring and termination recommendations; evaluating and documenting employee performance; approving schedules and time-off; training staff on unfamiliar tasks and safety issues as needed; enforcing company, state and federal policies; conferring with Human Resources Manager to resolve complaints within work force., • Performs inspections of construction projects to ensure compliance with regulations and standards including OSHA in accordance with plans and specifications; and ensures that required records and postings are maintained., • Identify conflicts with plans and specifications; Confers with the Architects, Engineers, subcontractors, and customers engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to resolve construction problems and prevent delays., • Assists the project manager in resolving issues with customers, subcontractors, and vendors by investigating and responding to concerns and complaints. Reviews shop drawings/RFI’s., • Purchases materials and tools to be delivered at specified times to conform to work schedules and under the direction of the project manager; maintains adequate (not excessive) inventories; and evaluates new materials and products., • Tracks expenses by project for submission to the project manager; fills out job logs on a daily basis to record subcontractor activity as well as general contractor activity; and brings any timing, cost or staffing issues to the attention of the project manager., • Schedule and conduct regularly scheduled meetings with crews to convey company and/or safety information including safety awareness and training. Responsible for on-site safety including but not limited to proper equipment usage, ensuring that personal protective equipment is being worn and maintaining a clean and safe work site, • Attend progress meetings with project manager and owner/customer., • On site tools and equipment are maintained daily and coordinates with shop for repair when necessary. On site tools and equipment are properly secured to prevent against theft and vandalism. Makes recommendations on capital equipment purchases and projects., • Responsible for being on site and available during working hours of crew members and subcontractors. Hours of work vary as needed., • Performs construction tasks as a crew member when not assigned to a project as Job Superintendent; working hours to be set by superintendent of that particular job site., • Performs additional duties as assigned to support project and organizational success. Knowledge of Position (Prior to Entry): • Construction techniques and applications, • Proficient in technology used for role, • Employee and equipment productivity, • Subcontractors general duties, • OSHA regulations, • City, state and federal laws, • Company personnel policies, • Equipment uses and practices Required Skills/Abilities: • Coordinating, scheduling and delegating tasks., • Serve as a working superintendent with knowledge of our self-performing trades, including carpentry, concrete, steel erection, and millwright services., • Functioning as a working superintendent., • Supervising and gaining respect of employees., • Inventorying supplies and materials., • Reading blueprints and engineering plans., • Inspecting job sites for safety compliance., • Communication, interpersonal skills, problem solving, as applied to interaction with coworkers, project managers, owners, subcontractors, etc. sufficient to exchange or convey information and to receive or give work direction., • Possess a valid driver’s license and meet the company’s Motor Vehicle Records (MVR) standards. Education/Experience: • High School Diploma or General Equivalency Diploma (G.E.D.)., • Ten years of increasingly responsible construction and equipment operation experience, would prefer 6 years of lead experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties such as those listed above. Physical Requirements: • Frequent physical activity like climbing, balancing, kneeling, crouching, reaching, standing, walking, driving, pushing, pulling, lifting, and using hands., • Work may involve exposure to mechanical parts, vibrations, fumes, dust, chemicals, oils, harsh weather, poor lighting, tight spaces, and loud noise., • Heavy Work: Exerting up to 75 pounds of force occasionally (with team assistance) and/or up to 40 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects.

Job Description Purpose & Connection to Our Mission At Taylored Expressions, every role contributes to our mission of sharing joy—with our customers, our teammates, and the creative community we serve. The work in this role matters because it helps bring creativity, care, and connection to life through the products and experiences we create and the way we work together as a team. We believe it is not possible to share something we don’t have. Because of this, we work intentionally to foster joy not only through what we do, but through how we show up each day. Team members at Taylored Expressions are invited to live out our Key Characteristics of being Creative, Caring, Connected, and Courageous in practical, visible ways through their daily work and interactions. What Success Looks Like in This Role Success in this role is measured by both outcomes and behaviors. Primary Focus: Task ownership and expertise. The Print Shop Coordinator manages daily print production, ensuring high-quality output and efficient workflows. This role requires strong organizational skills, technical expertise in print software and equipment, and the ability to handle multiple projects and deadlines. Responsibilities include producing printed materials, supporting internal departments and events, maintaining inventory and equipment, and collaborating with marketing and design teams to uphold Taylored Expressions’ brand consistency across all printed and promotional materials. A successful Print Shop Coordinator is: · A reliable executor with expanded ownership · Personally accountable and ownership-oriented · A subject matter expert in their work area · A proactive problem-solver · Process-aware and improvement-minded · Aware of time, pace, and priorities · A positive contributor to team culture · Coachable and open to growth Unique Accountability This role is uniquely accountable for the following tasks and objectives: Print Shop Operations · Manage daily operations of the Taylored Expressions print shop · Coordinate print jobs from intake through final production · Prepare, review, and organize files to ensure accuracy and print readiness · Operate high-output printers and finishing equipment (cutters, laminators, shrink wrap tunnel, scoring machines, folders, etc.) · Utilize Fiery RIP software to process and manage print jobs · Work with design files in Adobe Illustrator and CorelDRAW · Maintain production schedules and prioritize multiple jobs to meet deadlines · Perform quality checks for color accuracy and overall print standards · Troubleshoot file and equipment issues as needed · Monitor and maintain equipment, coordinate service and repairs · Communicate with internal teams and/or customers on specifications, timelines, and revisions · Maintain organized records of print jobs, materials, and inventory Preferred Skills: · Experience in print production, operations coordination, or marketing support preferred · Proficiency in Microsoft Office and working knowledge of Fiery RIP · Strong skills in Adobe Illustrator and CorelDRAW · Understanding of print processes, color management, and file preparation · Excellent organizational, time management, and multitasking skills with strong attention to detail · Ability to manage multiple projects in a fast-paced, deadline-driven environment · Strong communication and interpersonal skills · Problem-solving mindset with the ability to work independently and as part of a team · Ability to perform physical tasks related to printing and material handling · Proficiency in Microsoft Office (Outlook, Word, Excel) and Adobe Creative Suite (InDesign, Illustrator, Acrobat, Photoshop), CorelDRAW. Company DescriptionTaylored Expressions is a family-owned leader in the paper crafting industry, dedicated to providing tools, techniques, and inspiration that empower our customers to create beautiful handmade cards and crafts that spread love and joy. Come join our mission of sharing joy—with our customers, our teammates, and the creative community we serve!Taylored Expressions is a family-owned leader in the paper crafting industry, dedicated to providing tools, techniques, and inspiration that empower our customers to create beautiful handmade cards and crafts that spread love and joy. Come join our mission of sharing joy—with our customers, our teammates, and the creative community we serve!

Job Description Essential Duties: • Builds knowledge of dealer supported product lines, service standards, and procedures and keeps abreast of all changes in various models of equipment sold and serviced by the distributor., • Perform work as outlined on repair order with efficiency and accuracy, in accordance with Service shop and Factory standards., • Vehicle inspection including factory warranty repairs, computer diagnostics and programming., • Attend local, regional, and national service schools and training sessions as requested., • Maintain a clean, safe, and professional work environment not only in shop but also at customer sites., • Utilize various equipment and tools to include, but not limited to hand tools, power tools, testing/diagnostic equipment, cranes and hoists., • Foster close, positive working relationships with all service, parts and administrative personnel., • 2-year Diesel Technician/Mechanic degree or equivalent experience., • Minimum 3 years working in a full-time technician/mechanic role on heavy duty chassis., • Valid driver’s license with acceptable driving record, • Hydraulic, pneumatic, and electrical experience, • Welding/cutting torch experience, • Excellent skills in communication, interpersonal, organizational and attention to detail, • Direct industry experience, • Bend, squat, climb, grasp, twist, reach, lift or otherwise move frequently for extended periods., • Lift, move or otherwise transfer up to 50 lbs. frequently, or more occasionally., • Walk, stand, or otherwise move about continuously., • Typically sits, grasp items and performs keyboarding for occasional operation of a computer., • Exposure to typical machine shop physical hazards including chemicals which may require respiratory protection. This job description is intended to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. MacQueen will reasonably accommodate the known disabilities of qualified disabled individuals. MacQueen is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color or creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, pregnancy, affectional preference, disability, age, marital status, familial status, protected veteran status, status with regard to public assistance, membership or activity in a local commission dealing with discrimination, or any other protected class status. All candidates to whom an offer is made will be required to pass a criminal background check and drug test.

Job DescriptionJob Title: CNC Operator Job Description Our parts processor provides accurate measurements and precision cutting of parts using various technologies as per blueprints. Responsibilities • Receive and read instructions, implementing specific guidelines., • Review and interpret blueprints., • Maintain strong attention to detail., • Calculate angles and pitch from rise and run., • Understand basic angles and their applications., • Possess knowledge of all cutting types including Band Saw, Torch, Plasma, and Shear., • Perform notching, punching, and Press Brake functions., • Follow directions effectively., • Operate a forklift (certification preferred)., • Recognize different material types, such as carbon steel, stainless steel, and aluminum., • Stand for long periods and lift up to 75 lbs as part of production responsibilities.Essential Skills, • Ability to walk and stand for extended periods., • Capability to lift, push, and pull up to 75 lbs., • Skill to crawl on hands and knees and climb a ladder., • Willingness to work long hours., • Experience working outdoors year-round in various weather conditions., • Relevant experience in mechanical, technical, painting, and/or machining fields.Additional Skills & Qualifications, • High School Diploma., • 5+ years of experience in a relevant area., • Familiarity with CNC operation and machining.Why Work Here? After 60 days, employees receive front-loaded vacation time, are part of an employee-owned company with stock options, and enjoy competitive health benefits. Enjoy monthly company-paid lunches from food trucks. Employees are eligible for a scheduling attainment bonus based on production schedule achievement, enhancing the earning potential. Work Environment This role involves working in a fabrication shop environment on a smaller team of about 40 people. The work requires standing for long periods and lifting heavy objects. Shifts include 3rd shift Monday-Thursday from 6 pm-6 am and 1st shift Monday-Friday starting at 6 am. The work environment can be more dirty due to the nature of the fabrication shop, so personal protective equipment such as jeans, a work-appropriate shirt, steel-toed boots, a weld helmet, and safety glasses are required. The facility is new, with plans for expansion in 2026. Job Type & Location This is a Contract to Hire position based out of Carlisle, IA. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description TITLE: Director of IT / IT Director / Information Technology Director / Director of IT / Technical Director of IT (Direct Hire) REMOTE FOR IOWA RESIDENTS. YOU MUST RESIDE IN IOWA. IOWA ADDRESSES ONLY. ONSITE in the Des Moines IOWA AREA. WORK ONSITE, WITH FLEXIBILITY EACH WEEK. You MUST be able to drive to Des Moines onsite office weekly. Direct Hire IT Director of IT in the IOWA area up to $190K PLUS A 20% Bonus depending on years of experience. You must reside in the Iowa area. * For confidential consideration, please send a message to CARRIE DANGER, SVP Permanent Placement - on LinkedIn or send an email to me with your resume. My email can be found on my LinkedIn page. * HANDS-ON TECHNICAL PLUS LEADERSHIP: You MUST have: hands on current, server & networking IT skills. This is NOT a just DIRECTING / Leadership position. You must straddle both technical AND Leaders You MUST HAVE: -Current Technical demonstrated experience -Tech Strategic Planning -Technical Roadmap experience -Previous Direct report experience. You will be on the Front Lines working to improve technology for the business, Drive Solutions for the business, and you will be a difference maker in working with the business and leading the Front lines o operations-Strategic & Technical standpoint! This IT Director / Director of IT is a Strategic AND Technical Lead role in a small IT shop! -This is not just management / leadership, MUST be comfortable ‘In the Technical Day to Day of the IT organization, being out in Front of the Business needs. What You Will Need: • Technical IT Current Infrastructure experience, • IT Budget experience, • Proven track record of Direct Reports and Developing Staff. You must have Technical enough skills to UPSKILL a Technical Team, and address the technical gaps., • Smaller IT / Tech Team, 2 Direct Reports, 10 – 15 people in IT with a larger company., • Prior Infrastructure experience – Current Technical skills with VMware, server support / Windows, O365, and Storage., • Any Application Development knowledge and experience with an ERP software package is a Plus !, • General understanding of Server and Network performance and troubleshooting; Windows Server, Active Directory & MS Exchange Server, VOIP, Citrix & HyperVisor technology, Networking, and Cloud based technology. O365, Routers / Switches / Storage, • O365 and Cloud experience, • Security / Network Security / Generalized Data experience, • Managing Vendor relationships, • Manage the data center Drive Change! If you know of anyone who you would recommend for this opportunity or others, referral bonuses paid upon placement of the referral! Confidentiality! Full time Technical Director of IT up to 190K plus a 20% bonus . For immediate and confidential consideration on this Direct Hire position or other permanent IT opportunities in the Des Moines or the Iowa area, please call Carrie Danger, SVP at My Direct Office #: 515-259-6087, or e-mail resume confidentially to Carrie Danger – email address on my LinkedIN Profile. • Proven experience in IT infrastructure management, including VMware, Windows Server, and Active Directory., • Strong technical skills in networking, storage, and cloud technologies such as Office 365 and Microsoft Azure., • Demonstrated ability to lead and develop IT teams within a smaller organizational structure., • Experience in strategic planning and execution of technology roadmaps., • Knowledge of security practices and network troubleshooting., • Ability to manage IT budgets and vendor relationships effectively., • Familiarity with backup technologies, configuration management, and Cisco systems., • Hands-on expertise with server support, networking hardware, and data center operations.

Job Description Job description Traffic Signal Electrician- Des Moines, IA Do you want to work for a company where your efforts are not only appreciated and acknowledged, but also well compensated? Do you like the thought of working with a team where 100 % employee ownership means every member of the team is working towards the same goal? Do you want to become part of an amazing company that is growing? THEN THIS IS THE CAREER YOU'RE LOOKING FOR! Kline Electric is looking for a traffic signal technician for traffic structures to be based out of our shop in Des Moines, IA Here is what we are looking for: -Licensed journeyman electrician (preferred) -IMSA Traffic Signal Level II certification (REQUIRED) -Class A CDL operator (preferred) -Installation of traffic signal poles, cabinets, and heads -Wiring of lighting and traffic signal cabinets -Performs routine and emergency repair of traffic signals on site -Troubleshooting of traffic signal systems -Installs and maintains traffic signal systems -Installs underground traffic signal cable and street lighting cable installation -Ability to maintain composure in emergency situations -Ability to communicate effectively with co-workers, cities, and public -Ability to lead crew members to the tasks at hand -Ability to work in all weather conditions -Ability to work near heavy traffic -Ability to work in heights up to 50’ -High attention to safety and proper PPE MUST BE WILLING TO MOVE TO OR COMMUTE TO DES MOINES, IOWA We're a 100% employee-owned company. What does that mean? You do awesome work, you get paid and recognized for it; if the company prospers, your company stock may go up, and we look to have additional funds waiting for you at retirement. Sound good? That's just the start! We also have: • 401(k) with Company Match, • Profit Sharing, • Health Insurance, • Dental Insurance, • Vision Insurance, • Supplemental Insurance, • HSA, • Paid Time Off, • Paid Holidays, • Clothing Allowance, • Prescription Safety Eyewear Vouchers, • An Amazing Safety Incentive Program Oh yeah, and we also tend to hold numerous events throughout the year that are focused on celebrating with our team and our families. We are an Equal Opportunity Employer. Women and minorities are encouraged to apply. Key Words: Kline, Kline Electric, Electrician, Journeyman, Journeyman Electrician, Electrical, Crane, Derrick, Digger Derrick, traffic, infrastructure, underground, utility, technician, construction, traffic signal, trenching, digging, traffic, traffic infrastructure, traffic signal installation, construction, IMSA, IMSA level II , IMSA certification, IMSA certified, IMSA traffic signal Job Type: Full-time Pay: From $35.00 per hour Expected hours: No less than 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • Vision insurance Experience level: • 2 years Schedule: • 8 hour shift, • Day shift, • Monday to Friday Work setting: • Construction site, • In-person, • Outdoor work Experience: • Traffic Signal: 2 years (Preferred) License/Certification: • CDL A (Preferred), • Journeyman Electrician (Preferred), • IMSA Level II certification (Required) Work Location: In person

Job Description ESI was founded as a technical coffee service company in 1989; setting the standard for service quality and customer support in the specialty coffee industry. Our goal is to help our customers serve a high quality and consistently prepared coffee beverage through technical excellence. We’re looking for a skilled and motivated Field Service Technician to join our expert team, specializing in the installation, maintenance, and repair of cutting-edge coffee and espresso equipment. If you're looking for a rewarding career with excellent benefits and a supportive company culture, we want to hear from you! Experience is a plus, but what really matters is your drive and curiosity. We want someone who’s passionate about problem-solving and eager to take on new challenges. Our team of service technicians are factory-certified pros with an average of over a decade in the field, you'll be in good company. Responsibilities The essential functions include, but are not limited to the following: • Travel the region to install, repair, and maintain espresso machines, coffee brewers, grinders, and other specialty coffee equipment, • Utilize a company issued iPad to track time and materials in the FieldAware app, our field service management software, • Keep customers in the loop with timely updates on repair status and estimated timeframes, • Maintain your company-provided service vehicle in a neat, organized, and well-stocked condition, • Contribute to a tidy and efficient shop environment, • Participate in a weekly on-call rotation for after-hours service Essential Qualifications • High school diploma or GED, • Valid driver's license with the ability to be insured, • Proven customer service skills with a professional and friendly demeanor, • Strong oral and written communication skills, • Excellent troubleshooting and problem solving skills, • Ability to work independently while also contributing to a team Preferred Qualifications • Working knowledge of multimeter use, • Vo-Tech school degree; or one to two years related experience with electrical and hydraulic systems, • Familiarity with Google Workspace (Gmail, Chat, Drive, Calendar), • Previous experience in the coffee industry Benefits Position Benefits • Hourly rate of $21-$26 per hour, plus productivity bonuses that average an additional $2 per hour for technicians, • Take home service vehicle with gas card, • Company issued credit card for business related expenses including tools, our technicians do not spend any money out of pocket., • Bring your own device policy with $30 per pay period cell phone reimbursement, • In house technical support and training provided by our highly experienced technicians, • Medical, dental and vision insurance, • Retirement account matching, • Generous vacation policy & paid holidays, • Company paid life insurance & long term disability, • Ongoing career development & training, • Educational assistance program that reimburses tuition, • Employee discounts on items from our product division, Intermix Beverage

Job Description We are currently looking for Low Voltage Technician with Security and Telecommunications experience. Specific Responsibilities: • Install a work area outlet for floor, modular furniture and wall (terminate CAT5 and CAT6)., • Build closets (Mount and install backboards, cross connects, racks, patch panels, fiber optic and hardware). Install grounding for racks, equipment and cable as required. Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels)., • Performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts and transpose pairs on horizontal and riser cable; use a tone set., • Identify active voice or data circuits., • Knowledge and use of basic telecom hand tools., • Clear understanding of job safety requirements., • Should be familiar on wiring schemes and wiring testing., • Should be able to pull all types of low voltage cable., • Should understand and be capable in performing field terminations and labeling., • Possess skill to layout MDF and IDF closets, be able to dress all types of cable, and perform all type of terminations., • Shall be able to install ladder racking and seismic bracing both above and under raise floor., • Basic understanding of both copper and fiber cable testing and troubleshooting., • Read and understand blueprints and design document, • Primarily walking, standing, and bending for extended periods with some sitting., • Ability to communicate effectively with verbal, written, visual and listening skills., • Dexterity of hands and fingers to operate any required equipment as well as to operate a computer keyboard, mouse, and other technical instruments., • Able to lift and carry heavy equipment, up to 50 pounds., • Ability to pull cables., • Ability to climb ladders and work on raised platforms.Company DescriptionSOLID Personnel is a niche specific skilled trades recruiting & staffing firm founded in 2013. Our unique industry experience, and streamline staffing solutions separate us from the pack. SOLID is your one-stop shop for all professional recruiting & staffing needs in the following fields: Construction & Energy, Telecommunications, Low Voltage and Security. SOLID Personnel is an Equal Opportunity Employer.SOLID Personnel is a niche specific skilled trades recruiting & staffing firm founded in 2013. Our unique industry experience, and streamline staffing solutions separate us from the pack. SOLID is your one-stop shop for all professional recruiting & staffing needs in the following fields: Construction & Energy, Telecommunications, Low Voltage and Security. \r\n\r\nSOLID Personnel is an Equal Opportunity Employer.

Job DescriptionKey Responsibilities: * Respond to roadside and on-site service calls using a fully equipped service truck. * Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial. * Diagnose and repair tire-related issues and perform light mechanical repairs as needed. * Inspect tires and wheels for wear, damage, and proper inflation. * Perform fleet inspections and preventative maintenance checks when required. * Operate tire pressure monitoring systems (TPMS) and other diagnostic tools. * Maintain the service truck, tools, and equipment in safe operating condition. * Follow DOT regulations, company safety policies, and traffic laws at all times. * Provide exceptional customer service, including clear communication of service details and timelines. * Assist with warehouse or shop duties when not on service calls. Skills / Education / Requirements: * Must be at least 21 years of age. * Must pass a pre-employment drug screen. * Valid driver’s license with an acceptable driving record (CDL preferred but not required). • Possible overtime may be required. Experience with heavy-duty/commercial tires preferred, but not required. * Ability to lift and move tires weighing 30–250 lbs., with or without mechanical assistance. * Capable of working independently in various weather and road conditions. * Strong problem-solving and customer service skills. Benefits: * 401(k) with Company Match * Health Insurance * Dental, Vision, and Life Insurance * Paid On-the-Job Training * Career Advancement Opportunities Why Join Southern Tire Mart? * * #1 Commercial Tire Dealer in the U.S. since 2008 * #1 Truck Retreader in North America since 2007 * #1 North America Commercial Tire Dealer since 2012 * Family-owned company with a focus on safety, service, and employee growth #INDEEDMSVTM

Job Description A+ Lawn and Landscape is a fast-growing, locally owned business serving the Des Moines area with top-quality landscaping services. We’re driven by an entrepreneurial leadership team passionate about innovation, efficiency, and delivering exceptional service. We are currently seeking a skilled and motivated Auto Mechanic / Small Engine Mechanic to help maintain and repair our growing fleet of vehicles and landscaping equipment. This is a hands-on role where your technical abilities and leadership can make a real impact. Key Responsibilities * Perform maintenance and repairs on trucks, trailers, and landscaping equipment * Diagnose mechanical problems and complete necessary repairs efficiently * Conduct basic welding when needed * Maintain safety standards and follow proper procedures * Delegate assignments and supervise quality of work when necessary * Keep work areas clean and organized * Maintain accurate records of repairs and maintenance * Work independently and as part of a team to complete daily tasks Requirements * General mechanical knowledge and troubleshooting skills * Basic welding experience * Must have your own tools and a rolling toolbox * Valid driver’s license preferred but not required * Ability to take initiative and work with minimal supervision * Strong teamwork, communication, and decision-making skills * Familiarity with workplace safety practices and procedures Benefits * Paid vacation * Paid holidays * 401(k) retirement plan * Health, dental, and life insurance * Supportive and team-oriented work environment Job Details * Job Type: Full-time * Schedule: Monday–Friday (occasional weekends if needed) * Location: Des Moines, IA 50313 * Pay: Based on experience (can be added if you'd like) How to Apply Apply directly on Indeed with your resume. We’re looking for candidates who take pride in their work and are ready to grow with a company that values quality, teamwork, and innovation. #hc180908

Job Description Job Title: Superintendent Immediate Supervisor(s): Field Operations Manager Essential Duties: The Superintendent will oversee and manage all aspects of the construction process on-site. Will be responsible for ensuring that construction projects are completed on time, within budget, and to the highest quality standards. The Construction Superintendent will supervise daily operations, manage subcontractors and laborers, ensure safety compliance, and be the key point of contact for all on-site project activities. Key Responsibilities: • Site Supervision and Management: Oversee the day-to-day operations of the construction site, ensuring the project is progressing according to the approved plans, schedule, and budget., • Project Scheduling: Develop and maintain the project schedule, ensuring timely completion of work and managing delays and changes in scope. Coordinate with subcontractors and vendors to support workflow and deadlines., • Quality Control: Maintain quality standards on the job site, perform inspections, identify issues, and ensure all work meets project specifications and safety requirements. Review submittals and shop drawings. Check plans and specifications for accuracy of dimensions and inconsistencies between plan sheets and specifications. Examine/inspect field conditions and identify problems, inaccuracies, and savings measures that arise or may be encountered., • Safety Management: Enforce strict adherence to safety protocols, OSHA regulations, and company safety policies. Conduct weekly safety inspections, meetings, and inspections, immediately addressing hazards to maintain a safe work environment., • Subcontractor and Labor Management: Supervise and direct the work of subcontractors, ensuring that tasks are completed as per the project plan. Resolve any issues that arise between subcontractors or with the work being performed., • Communication: Serve as the primary on-site point of contact for the client, architect, engineers, subcontractors, and project management team. Ensure all parties are informed of project status, potential issues, and upcoming milestones., • Budget Management: Monitor project expenditures and manage costs to prevent overruns. Provide regular updates to the project manager regarding project financials and recommend corrective action when necessary., • Project Documentation: Maintain accurate and thorough records of all activities on-site, including daily logs, progress reports, materials deliveries, equipment usage, and labor hours., • Problem Solving: Proactively identify and resolve any construction-related challenges, delays, or issues that may arise during the project lifecycle. Collaborate with the project manager and other stakeholders to implement solutions., • Materials and Equipment Management: Oversee the delivery and proper storage of materials, ensuring that all necessary supplies are available and that equipment is functioning correctly for the project's duration., • Education: A high school diploma or equivalent is required; a bachelor's degree in construction management or civil engineering or a related field is preferred., • Experience: Minimum of 5 years of experience in construction management or as a Superintendent, with hands-on experience supervising commercial, residential, or industrial projects., • Knowledge: Comprehensive understanding of construction processes, building codes, safety regulations, and construction materials. Knowledge of project management software is a plus., • Certifications: OSHA 30-hour or 40-hour Construction Safety certification is required. Other relevant certifications (First Aid/CPR, LEED, etc.) are preferred., • Skills:, • Strong leadership and team management skills., • Excellent communication and interpersonal abilities., • Ability to read and interpret blueprints, specifications, and construction documents., • Exceptional problem-solving, decision-making, and conflict-resolution skills., • Strong organizational skills with the ability to handle multiple tasks simultaneously., • Physical Requirements: Ability to perform physical tasks at the job site, including walking, standing, climbing, lifting, and carrying materials as needed., • Detail-oriented with strong attention to accuracy and quality., • Ability to work in a fast-paced and dynamic environment., • Strong work ethic with the ability to manage time effectively., • Proactive, adaptable, and capable of working independently.

Job DescriptionSalary: Are you looking to join a company with opportunity for growth and development? EPI Power is hiring a Project Engineer to be responsible for several functions throughout the duration of assigned projects including planning, buyout, management and closeout. This role actively assists the project team in monitoring project status and identifying issues that may impact the project schedule and/or budget. The ideal candidate is open to travel and/or relocation based on upcoming project needs. EPI is hiring both entry-level and experienced Project Engineer candidates. This role requires the ability to work 6 days per week, Monday Saturday. EPI Power, LLC (EPI) is a licensed electrical contractor and subsidiary of The Weitz Company that specializes in data centers. Our mission is to safely deliver industry-leading electrical construction solutions on a fast-track basis. We believe our employees to be our most valuable asset, and we are committed to growing a diverse and inclusive culture that inspires, motivates, and continuously improves. What You'll Do: • Review electrical drawings, specifications, and project scope, • Coordinate with VDC team and review BIM/shop drawings, • Assist with submittals preparation and tracking, • Support procurement and material tracking, • Participate in coordination and project meetings, • Support prefabrication coordination, • Maintain engineering logs and documentation, • Coordinate with Engineering, VDC, Procurement, and Field teams, • Ensure compliance with project drawings and specifications, • Support Engineering Project Manager and Project Manager, • Identify and help resolve technical and coordination issues, • Support quality control and installation verification, • Assist with as-built documentation and project closeout, • Track engineering deliverables and project deadlines, • Coordinate with field team and provide technical support, • Issue and track RFIs, • Support preparation and tracking of MTOs, • Support engineering deliverables (cable schedules, panel schedules, as-builts) What We're Looking For: • Experience:, • 1-2 years of experience as a Project Engineer or in a similar role, industry related degree/coursework, or related internship experience, • Engineering degree is a plus, • LEAN principles experience is desirable, • Knowledge of NEC code is a plus, • Skills:, • Displays a high level of initiative and is comfortable making independent judgement, • Analytical thinker who enjoys solving problems, • Excellent written and verbal communication skills, • Desire to work in a collaborative, supportive, team environment, • Organized and a high attention to detail, • Flexibility, • Technology:, • Proficient in basic computer software including Microsoft Word, PowerPoint, Excel, and Outlook, • Autodesk software programs (Revit AutoCAD and Navisworks), • Ability to learn specific job-related software upon hire (JDE, Procore, Bluebeam, scheduling software, etc.) What We Offer: • Competitive Pay, • Rewarding Bonus Program, • Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings, • Employer-Paid Short- and Long-Term Disability Programs, • Employer-Paid Life Insurance, • Generous Paid Time Off Provisions, • 401K Retirement Savings Plan with Company Match, • Tuition Reimbursement, • Fully Paid Parental Leave, • Voluntary Products Including: Critical Illness Insurance and Accident Insurance, • Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-basedsubsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce.We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable.Click hereto review our Privacy Notice. #LI-MJ1

Job Description Project Engineer - Video Boards Musco's Video Boards Team has an opening for a Project Engineer at our Des Moines office. If your experience aligns with the qualifications outlined below, we look forward to hearing from you! Essential Criteria: • 2+ years of experience in AV system design, engineering, or drafting, • Proficiency in AutoCAD, Vectorworks, or other CAD software, • Strong understanding of AV signal flow, rack layouts, networking, and power distribution, • Experience designing low-voltage AV systems (LED displays, video processors, control systems, audio integration, • Familiarity with mobile/portable AV systems or event production AV is preferred, • Ability to read and interpret construction drawings, architectural/structural plans, and technical specifications, • Strong attention to detail, organizational skills, and ability to work independently with minimal supervision, • Excellent written and verbal communication skills. Strong problem-solving skills with a flexible, team-oriented attitude, • Basic understanding of power systems, generators, and temporary AV setups for live events, • Experience using NetSuite, SuiteProjects, Asana, or other project management tools, • Familiarity with Novastar, Daktronics, or other LED control systems is a plus Fixed Installation AV Design: • Develop comprehensive project submittal packages, including precise LED layouts, detailed AV schematics, and efficient rack designs for fixed installations, • Collaborate closely with other engineering disciplines to ensure accurate integration of structural and electrical specifications, • Efficiently complete installation submittals and shop drawings, maintaining a strong focus on both speed and quality, • Design integrated AV system packages for custom LED mobile trailers, encompassing optimized rack layouts, clear control diagrams, detailed wiring schematics, and comprehensive signal flow documentation, • Develop trailer AV packages, adeptly integrating both standard and specialized component configurations, • Actively participate in weekly peer review sessions, providing constructive feedback on AV schematics, layouts, and trailer designs, • Support internal Research and Development efforts, specialized fabrication projects, standards development, or workflow improvement initiatives as assigned Musco, a privately held company since 1976, is the global leader in sports and large-area lighting solutions, with projects in 135 countries. Headquartered in Oskaloosa, Iowa, Musco employs more than 1,800 team members worldwide. Team Culture and Partnerships: At Musco, we offer meaningful work in a team-first culture with continuous learning and professional development. We value work-life balance, providing flexibility for community involvement, family activities, and personal time. We have a generous benefit package created with the Team in mind. It includes varying health insurance plans, vision and dental insurance, PTO, 401k, profit sharing, and more! As supporters of recreational organizations, we help ensure safer and more enjoyable playing experiences worldwide. If giving back resonates with you, learn more about our partnerships. Stay connected with us! LinkedIn | Facebook | Instagram | YouTube

Job Description Department: Service FLSA Status: Non-Exempt PRIMARY PURPOSE: Housby is looking for an experienced, self-driven diesel technician to join our growing Service team! This position is primarily responsible for diagnosing and repairing vehicles according to OEM guidelines with little supervision and communicate needed repairs to management. WHY HOUSBY? Housby offers a flexible environment, competitive benefits, and a culture that promotes growth along with celebrating success. Here at Housby we realize that our greatest asset remains our employees, and we are committed to developing and promoting our talented individuals to support our future leadership needs. EXPECTATIONS: Essential Duties include the following. Other duties may be assigned. • Maintain equipment by performing inspections to identify work and/or damaged parts., • Diagnose and repair vehicles according to OEM guidelines., • Make recommendations of repairs needed to managers to provide estimates and communicate with customer., • Correct vehicle deficiencies by replacing, repairing, and adjusting parts. This may include disassembly of major components, subcomponents or systems to include engine, drivetrain, electrical, air conditioning, cabs, clutches or other components., • Perform repairs within given timelines., • Complete road tests for vehicles, which may include the need to drive such vehicles., • Document detailed steps taken for repairs, and properly document time needed to complete repairs via computer system., • Save parts from potential warranty repairs, and tag them with the work order number, and then place them in the warranty room., • Use shop provided tools as per intended use. Should a tool be lost or broken, report this to management immediately., • Properly dispose of any fluids., • Clean work bay when repairs are complete., • Follow general safety rules for each job. Ear/eye protection, leather boots, safety cages, etc., • Must supply tools to make job as efficient as possible., • May be asked to travel at times., • Complete continuing education courses., • At least 8 years of heavy-duty diesel mechanic experience with strong background in engines and drivetrain., • Training on multiple different classes of heavy-duty trucks is highly preferred., • Class A or B CDL is strongly preferred (company will assist employee in obtaining)., • Possess a strong attention to detail., • Ability to ready and comprehend instructions and information., • High school diploma or GED required., • Certification from a diesel mechanic trade school (or equivalent experience)., • Ability to view a computer monitor., • Alpha/numeric keyboarding., • Ability to lift up to 50 pounds., • The work environment for this position is varied due to the differences in our work site. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, electrical, vibrations, fumes or airborne particles, toxic and outside weather conditions., • The noise level in the work environment is usually moderate to very loud., • Competitive Hourly Pay (Based on Experience)., • Competitive Monthly Bonus Program., • Benefits including medical, dental, vision, life insurance, 401(k) with company match, and more!, • Company provided uniforms., • 9 Paid Holidays (Including your Birthday off!), • 120 hours of PTO after first year., • Energetic and transparent work environment and great company culture.

Job Description Job Title: Heavy Duty Diesel Mechanic Location: Altoona, Iowa Company: Interstate Power Systems Pay Range: $25.00-$50.00/hour DOE Interstate Power Systems is hiring Mid-Level and Experienced Heavy-Duty Diesel Technicians at our Altoona, Iowa location. This opportunity is ideal for diesel mechanics with hands-on experience working on on-highway heavy-duty diesel trucks, including Detroit Diesel engines (Series 60 and newer), Cummins, CAT, PACCAR, International, and related platforms. Our technicians service Freightliner, Kenworth, Peterbilt, International, Mack, and other heavy-duty truck manufacturers. We offer a stable work environment, OEM training, manufacturer certifications, and clear career growth opportunities. What You’ll Do • Diagnose, repair, and maintain heavy-duty diesel trucks and components, • Perform advanced diesel diagnostics on engines, electrical systems, and aftertreatment, • Repair engines, transmissions, brakes, suspension, driveline, and chassis systems, • Communicate repair findings clearly with service writers and shop leadership, • Complete quality repairs to maximize equipment uptime, • Experience as a Diesel Technician or Heavy-Duty Diesel Mechanic, • Strong working knowledge of Detroit Diesel (Series 60) and Cummins engines, • Electrical and diagnostic troubleshooting experience, • Valid driver’s license required (CDL holders eligible for additional pay), • Competitive hourly pay based on experience, • PTO starting day one, • Paid holidays, • Medical, dental, and vision insurance, • 401(k) with company match, • Company-provided uniforms and tool program Interstate Companies is an Equal Opportunity Employer, and we encourage all qualified and interested people to apply for this position by submitting a resume for consideration. Military Friendly Hiring. #Mechanic #Technician #CDRXP

Job Description COMPENSATION NEGOTIABLE DOEEQ, plus generous benefits & incentives. TUITION REIMBURSEMENT, RELOCATION PACKAGE & SIGN ON BONUS NEGOTIABLE for right candidate! POSITION IS LOCATED IN ALPENA, SD In addition to understanding basic equipment and maintenance routines, the ideal candidate would have experience and be proficient in: • Diagnostics of:, • electronic systems, wiring and components, • after treatment systems Stan's also provides: • year-round climate-controlled shop, • all tools Full Time (averaging 45 hours/week), OT eligible, flexible schedule. #hc106195

Job DescriptionOur client is looking for a Diesel Mechanic, the primary purpose of this position is to provide basic mechanical, repair, maintenance, and other related services to the customers. This person must have a clear understanding of routine and complex truck and trailer repair processes, routine maintenance tasks, shop techniques and practices, parts, materials and the operation, use, and basic repair of basic shop equipment. Performs assigned duties and tasks to meet Company standards and customer satisfaction. This position reports to the Shop Supervisor but may receive work instructions for specific assignments from a lead mechanic or technician. Duties and Tasks • Assists Mechanics with completing complex mechanical truck and trailer service, maintenance, and repairs, on all makes and models of trucks and trailers, including, but not limited to working with the following mechanical systems: engine, electrical, drive train, tire, steering, suspension, refrigeration units, etc., • Performs vehicle and trailer inspections according to DOT standards and understands what is necessary to bring identified basic deficiencies into compliance., • Performs routine and complex vehicle fluid and filter checks and replacements. Checks these systems according to manufacturer’s specifications and replaces fluids and filters with appropriate materials and according to company standards., • Conducts routine vehicle and trailer electrical inspections. Makes routine replacements of fuses, bulbs, batteries, etc. Makes routine and complex electrical repairs, installations and replacements., • Informs Supervisor regarding problems or difficulties encountered during troubleshooting repair or maintenance procedures. Discusses any problems, complaints, requests, or ideas with the Supervisor., • Assists the Shop Supervisor with training other mechanics working in the shop., • Assists with managing the stock and equipment inventories as assigned to the shop. Takes and reports physical counts of stock inventory according to schedule established by the Shop Supervisor. Notifies Shop Supervisor when stock inventories are approaching reorder points., • Will be required to utilize shop software on a daily basis which includes: creating jobs, clocking in and out of jobs, accurately entering all parts used on jobs, and entering all notes efficiently and thoroughly., • Uses shop equipment in an appropriate and safe manner. Follows safety procedures to minimize risk of damage to property or personal injury. Especially uses precaution when working around explosive materials, solvents, and when removing or replacing gas tanks.Qualifications, • Requires valid current Iowa driver’s license., • Employee must have the ability to drive all types of trucks, including manual transmissions., • Three to five years of experience with diesel truck repair is preferred, but 2 years of experience is required., • Employee must be able to lift up to 100 lbs., • Employee must have the ability to write a work order., • All employment is contingent on passing a pre-employment drug test., • Employee understands all employees must submit to random drug/alcohol testing if they are randomly selected throughout the year, at no cost to the employee., • Ability to read technical diagrams and manuals., • Requires working knowledge and ability to use mechanical tools and equipment such as wrenches, lifts, etc., • Working knowledge and ability to use diagnostic and repair tools and equipment., • Prefer High School Diploma or equivalent with tech school training or two years related experience.

Job DescriptionService Advisor - 4 Day Work Week! | Pleasant Hill & Des MoinesAbout Smith Automotive Join our growing, forward-thinking auto repair shop with locations in Pleasant Hill and Des Moines! We're not a dealership or chain store—we're a local business that values our team and creates a positive workplace where you can build a long-term career. Why You'll Love Working Here ? 4-Day Work Week – Monday through Thursday, every weekend is a 3-day weekend! ? Competitive Pay – Based on experience and certifications ? Comprehensive Benefits Package • Health insurance, • Life insurance, • Retirement plan, • Paid holidays, • Customer Communication – Answer phones, schedule appointments, and greet walk-in customers, • Service Management – Check in vehicles, review repair orders, and provide status updates throughout the day, • Sales & Estimates – Prepare and present quotes to customers, • Payment Processing – Handle checkout, process payments (cash, check, credit card), and manage payment arrangements, • Follow-Up – Make customer retention calls and ensure outstanding service, • Previous automotive service advisor experience, • Valid driver's license and clean driving record, • High school diploma or equivalent, • Strong computer skills and ability to learn shop management software (Tek Metric experience a plus), • Excellent communication skills – both phone and in-person, • Ability to multitask effectively in a fast-paced environment, • Strong organizational skills and attention to detail, • Professional appearance and demeanor, • Ability to work a flexible 40-hour week (Monday-Thursday), • Enthusiastic, friendly attitude, • Genuine desire to help people, • Ability to handle high-stress situations professionally, • Team player who can also work independently To Apply: Submit your resume or detailed work history today. Smith Automotive is committed to ethical business practices and providing outstanding customer service. We're looking for team members who share these values and want to grow with us. #hc175133

Job Description PURPOSE The Stratus Specialist is a key operational and technical role focused on supporting fabrication workflows and maximizing the value of the Stratus platform. This individual will be responsible for onboarding, training, troubleshooting, reporting, and integration tasks that directly support the fabrication team. The ideal candidate will have a strong aptitude for learning software quickly, experience in manufacturing or construction technology workflows, and the ability to work cross-functionally to streamline digital fabrication and data-driven decision making. This role requires close collaboration with the fabrication and VDC teams and reports directly to the Director of VDC. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. Stratus Implementation and Support • Serve as the internal expert on the Stratus platform and primary support contact for fabrication teams., • Assist with the setup and configuration of Stratus to align with company fabrication processes and standards., • Provide hands-on training and ongoing support for fabrication, VDC, and field users to ensure efficient use of Stratus tools and workflows., • Troubleshoot and resolve user issues, system errors, and workflow challenges within Stratus. Reporting & Analytics: • Create, maintain, and distribute custom reports using Stratus reporting features to track key fabrication and project KPIs (e.g., productivity, progress, package status, cut lists)., • Ensure reports are accurate, relevant, and aligned with business objectives., • Interpret data insights for internal stakeholders and assist in decision-making based on performance metrics. API Integration & Data Management: • Utilize Stratus’s open API to gather key performance data and integrate with internal systems or dashboards (Power BI, SQL stores, etc.)., • Develop, test, and maintain API scripts or automation workflows that pull data efficiently and securely., • Collaborate with IT, VDC, and process engineering to expand data-driven workflows. Training and Documentation: • Develop training materials, process documentation, and best practices guides for Stratus usage., • Maintain clear, organized documentation of system configurations, workflows, and troubleshooting procedures., • Lead training sessions and workshops for new and existing users. Collaboration and Coordination: • Partner with Fabrication, VDC, Engineering, and Project Management teams to align Stratus configuration with operational needs., • Provide feedback and recommendations for process improvements and potential feature enhancements. Required Qualifications • Experience:, • Five years of practical experience with fabrication, construction technology workflows, or software support roles., • Familiarity with Stratus software is a plus but not required; strong aptitude for learning new applications is essential., • Technical Skills:, • Proficiency with data reporting tools and experience generating meaningful analytics., • Comfortable working with APIs and extracting data via REST or similar interfaces., • Solid understanding of databases, data structures, and basic scripting (Python, JavaScript, PowerShell, etc.)., • Experience with Autodesk products (Revit, AutoCAD, ESTmep, CAMduct) is a plus., • Soft Skills:, • Excellent communication and interpersonal skills, especially for training and support., • Detail-oriented with strong problem solving and analytical abilities., • Ability to work independently and collaboratively across teams. Preferred Qualifications • Experience supporting digital fabrication or MEP workflows., • Prior experience in construction technology, VDC, or BIM fabrication environments., • Familiarity with business intelligence tools (e.g., Power BI)., • Comfortable interpreting and documenting technical processes for diverse audiences. Key Competencies • Technical adaptability and eagerness to learn new systems, • Strong service mindset and customer focus, • Organized, self disciplined, and proactive, • Able to prioritize tasks in a dynamic fabrication environment Work Environment • Prolonged periods of sitting at a desk and working on a computer, • Office and Shop setting. (In person), • Requires visits to fabrication facilities to support hands-on training and troubleshooting, • Must be able to lift 10 pounds occasionally, • May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionDescription: Shive-Hattery is a premier architecture and engineering consulting firm headquartered in Cedar Rapids, Iowa. In total, the firm has 17 offices across the US. Shive-Hattery was founded in 1895 and has earned and maintained a strong reputation for excellence in client focus, quality service and communication. The firm prides itself on its One Firm, full-service offering; placing the best people with their clients, no matter the project location. Join Shive-Hattery’s West Des Moines, IA Transportation Team as a Bridge Engineer and advance your career while leading innovative bridge and civil structures projects. In this role, you’ll work closely with clients and have the opportunity to contribute to a variety of projects, including: • Bridge and box culvert design, • Lake and dam spillways, • Retaining walls and tunnels, • Park structures, • Water and wastewater treatment plant concrete tanks, • Riverfront developments Joe Appel, Structural Engineer SE, PE, LEED AP, shares: “Working on this major structural and roadway project with the talented multi-discipline Shive-Hattery team, as well as the bridge consultants and Iowa and Illinois DOTs has been rewarding at many levels. Seeing the bridge being built and then used by pedestrians and motorists has been an ongoing example of the impacts that our work can have for the public good and what the addition of aesthetics and landscaping can add to a functional design. In essence, we are linking communities with innovative designs!” You will find the right balance at Shive-Hattery. A large pool of resources in a 600+ person design firm, with a small firm feel where you build personal connections with colleagues, partners and clients. Flourish as a professional with the freedom to chart your own course and make an impact – and Design What Matters to make the world a better place. At Shive-Hattery, our learning and teaching culture is built on collaboration. You’ll have the opportunity to both learn from and teach your peers, working across disciplines to enhance your skills and grow professionally. If you have a passion to make clients successful, create thoughtfully designed public improvements and have these educational and professional experiences apply now: Requirements: • Design projects as a structural engineer for transportation projects of various sizes. Work with experienced engineers and technicians while coordinating work within multi-discipline teams. The majority of efforts will focus on our long-standing public infrastructure clients who we work with locally and nationally, • Must be capable of working on multiple projects simultaneously, • Must be able to drive and have access to an automobile, climb ladders and work off of elevated platforms and open grating, and wear personal protective equipment required for specific clients and sites, • Additional responsibilities include overseeing shop drawing reviews, • Education: Bachelor’s degree in Civil Engineering, Structural Engineering or a related field, • Experience: 4+ years in Structural Engineering, • License/Certification: Professional Engineer license in Iowa or the ability to obtain license within 12 months, • Experience leading project teams and interfacing with clients, • Experience with OpenBridge Modeler, OpenRoads Designer, Microstation and other bridge design software is a an advantage Experience with Iowa DOT projects is a plus Why Shive-Hattery? Our learning and teaching culture is founded on collaboration. You will learn from and teach other employees while working across disciplines. You will grow your skills and continue your professional growth at Shive-Hattery. We offer a competitive total compensation package, including industry-leading pay and over thirty-five benefits designed to support your well-being and career development. Benefit Highlights: · Medical, Dental, Vision – 4 tiers of coverage · Voluntary Life Insurance – Employee, Spouse, and Child · Voluntary Insurance Plans – Accident, Critical Illness, & Hospital Indemnity · FSA – Medical & Dependent Care · 8 Paid Holidays + PTO · Paid Parental Leave · 401K/Roth 401K with Company Match · Overtime Bonus · Profit Sharing Bonus · First Time License Bonus · Tuition Reimbursement & Licensure/Certification Financial Support · Professional Development Opportunities · Calm Meditation & Stress Relief Subscription · …And Many More! U.S. Citizen, U.S. Person, or Immigration Status Requirements: • At this time, we are unable to provide visa sponsorship now or in the future. Candidates must have current and ongoing authorization to work in the United States without employer sponsorship. Shive-Hattery offers a flexible work environment and supports balancing personal and professional responsibilities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Iowa Truck & Trailer is looking for an experienced Service Manager! At North American Truck & Trailer, we pride ourselves on our energetic atmosphere. By joining our team, you can experience a rewarding career with a leader in the truck industry. We are always looking for great candidates to join our team. ~Summary: Responsible for running an efficient and profitable service department. S/he will operate the department at maximum production, controlling costs, building a loyal clientele, maintaining good employee relationships, setting and obtaining sales and profit objectives, and maintaining service records. Essential Duties and Responsibilities: include the following. Other duties may be assigned. • Forecast goals and objectives for the department and strive to meet them., • Working with all departments in harmony., • Prepare and administer an annual operating budget for the service department., • Attend managers’ meetings as requested., • Understand, keep abreast of and comply with federal, state and local regulations that affect hazardous waste disposal, OSHA right-to-know, etc., • Hire, train, motivate, counsel, and monitor the performance of all service department staff., • Direct and schedule the activities of all department employees., • Provide technical assistance to employees as needed., • Conduct meetings with department employees to discuss activities and problems of mutual interest., • Monitor Technicians’ payroll records., • Conduct monthly safety meetings., • Establish and maintain good working relationships with customers to encourage repeat and referral business., • Establish and maintain good working relationships with vocational and technical schools to enhance personnel recruitment activities., • Serve as a liaison with factory representatives., • Greet all customers promptly and give fair estimates on costs and time required for repairs and maintenance., • Handle all customer complaints., • Break down estimates into labor and parts before the job is started so that repair technicians are aware of time allowances., • Quality-check completed jobs., • Keep abreast of new equipment and tools available and recommend purchases., • Ensure that the work areas and customer waiting areas are kept clean., • Account for all documents; ensure that none are missing., • Control the performance of the department using these tools: Daily Operating Control, efficiency and productivity control, comeback reports, warranty reports, telephone surveys, and monthly forecasts., • Maintain reporting systems required by general management and the factory., • Monitor repair order trends, such as number of repair orders completed, number of items per repair order, dollar sales per repair order, dollar sales per service advisor, etc., • Ensure that customers’ service files are up-to-date and are readily available for reference. (Dealer: Specify here whether your files are computerized or not and the related specifics:)., • Monitor the location and care of the shop tools., • Collect accounts receivable for service work., • Follow up on parts department orders to ensure parts availability., • Must maintain and keep a safe working environment., • Participate in all available training programs., • Must have a working knowledge and understanding of the company’s Job Safety Analysis pertaining to this position and positions this individual supervises., • Must have a working knowledge and understanding of the company’s safety policy. Supervisory Responsibilities: • Oversee Service Department., • Must conduct all 90 Day reviews in a timely manner., • Must have each employee’s yearly Performance Review completed by his/her actual anniversary date. Benefits available the 1st of the month following date of hire. • 401(k) retirement plan with company match, • Medical, Dental, and Vision Insurance, • Life Insurance, • Short- and Long-Term Disability Insurance, • Paid Vacation, Sick, and Holidays, • OEM Training Incentive for Parts & Service personnel, • Tool Reimbursement for service employees, • Tuition Reimbursement for service employees, • Discount on Parts/Labor and Vehicle Purchases, • Employee Referral Bonus Come experience the difference! In joining the North American Truck and Trailer family, you're not just securing a job – you're becoming a vital part of a dynamic team that values camaraderie, respect, and mutual support. We pride ourselves on fostering a family-like work atmosphere where every member's contributions are acknowledged and celebrated. As an integral driver or member of our team, you'll experience a range of benefits that extend beyond the professional realm. From comprehensive healthcare coverage to competitive compensation packages and opportunities for career growth, we're committed to ensuring your well-being and success. At North American Truck and Trailer, you're not just an employee; you're part of our extended family, dedicated to achieving excellence together. Join us today and be a part of a community that values your skills, respects your aspirations, and embraces you as one of our own. Your journey towards a fulfilling career and a supportive work environment begins with us. Welcome to the family! #hc175891

Job Description Mechanics complete a wide variety of repairs on heavy equipment such as bulldozers, excavators, loaders, tractors, compaction equipment, trucks, trailers and other production vehicles. We are currently hiring mechanics / field service technicians dedicated to heavy equipment. Additional responsibilities may include working in the main shop during downtime (rain days and/or winter). Mechanics work from 7:00am to 5:00pm Monday through Friday. Rotational weekend overtime required as necessary (during peak working season). Job Requirements: • Associate’s degree in Diesel Technology or a related field preferred., • 3 years or more mechanic experience with heavy equipment may supplement a degree., • Experience with CAT, CASE, John Deere, Komatsu, Link Belt, Kenworth, Mack, and/or Peterbilt equipment preferred., • Ability to sit, stand, climb, bend, kneel, crawl and squat as needed., • Ability to lift up to 50 lbs independently., • Ability to perform overhead and elevated work required., • Must provide own tools and toolbox., • Experience with hoisting and/or overhead cranes is preferred., • Class A or B CDL preferred. Clean driving record required. (medical card is NOT required) Job Summary: Sandstone Management Ltd. is seeking skilled and dedicated Heavy Equipment Mechanics to join our team. The ideal candidates will have a strong background in mechanical knowledge and experience with diesel engine repair, automotive repair, and hydraulics. This role involves diagnosing, repairing, and maintaining a variety of heavy equipment, ensuring optimal performance and safety standards. Duties: • Diagnose mechanical issues in heavy equipment and perform necessary repairs., • Assemble and transmit parts for equipment as needed., • Conduct routine maintenance on diesel engines, including troubleshooting and repairs., • Operate lube truck and perform field service preventative maintenance., • Repair hydraulic systems to ensure proper functionality., • Work with various types of heavy machinery, including Caterpillar, Case, John Deere, Komatsu, Link Belt, Kenworth, Mack, and/or Peterbilt., • Weld components as required to maintain or enhance equipment integrity., • Provide excellent service by communicating effectively with co-workers and supervisors., • Maintain a clean and organized work area to promote safety and efficiency., • Evaluate equipment manuals and order necessary parts via online platforms., • Provide a positive attitude and work well with others. Experience: • Proven experience as a Heavy Equipment Mechanic or similar role., • Strong mechanical knowledge with hands-on experience in diesel engine repair, automotive repair, and hydraulics., • Familiarity with popular heavy equipment machinery brands is preferred but not mandatory., • Ability to weld and perform basic fabrication tasks is advantageous., • Excellent problem-solving skills and attention to detail., • Strong communication skills to effectively interact with team members. Join our team of professionals dedicated to providing top-notch service in the heavy equipment industry! Benefits: Mechanics will start at $39.36 per hour, based on experience. Sandstone Management Ltd. pays 100% of all benefits, including health insurance premiums and pension dues, as provided by Local 234 Operating Engineers Union. Overtime is paid after 40 hours per week, and employees are paid weekly on every Friday. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. Employee Benefits: • Company issued laptop and cell phone, • Competitive Wages - Be paid your worth!, • Uniforms allowance - $750/annually, • Health, dental and vision coverage - 100% paid by Sandstone Management Ltd. as provided by Local #234 Operating Engineers Union, • Paid Time Off – Starts at 2 weeks of paid vacation time, • Sign on bonus - $1,000.00 (after 90 days) Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Sandstone Management Ltd. is an Equal Opportunity Employer, and we encourage all qualified and interested people to apply for this position by submitting a resume for consideration. Military Friendly Hiring. Company DescriptionAt Sandstone Management, we believe in having foundations built on our integrity. Our success throughout the past decades has been the direct result of precision work being completed on time and under budget. With a reputation for being honest and making moral business decisions, we are the safe solution to your excavating and site utility needs. Whether the project is big or small, Sandstone Management can handle it all!At Sandstone Management, we believe in having foundations built on our integrity. Our success throughout the past decades has been the direct result of precision work being completed on time and under budget. With a reputation for being honest and making moral business decisions, we are the safe solution to your excavating and site utility needs. Whether the project is big or small, Sandstone Management can handle it all!

Job DescriptionDescription: JOB PURPOSE or JOB SUMMARY: Service, repair, recondition and assemble customer and company cylinders, new or used. Maintain and operate shop equipment and tools, performing quality work, as quickly and profitably as possible. Sell Certified Power’s parts, labor, and whole goods service 100% of the time. Contributes to a positive working culture, builds strong relationships, and lives out the values of integrity, collaboration, and accountability. ESSENTIAL DUTIES and RESPONSIBILITIES: • Machine raw materials or modify old products as assigned by Service Manager., • Diagnose problems and determine what repairs are needed., • Perform any inspections as required., • Machine any products., • Keep accurate, easy-to-read records of work performed., • Maintain a clean work area., • Maintain safe work habits., • Check and report any shortages and malfunctions to the service manager., • Maintain and care for all shop tools, machines, and equipment., • Complete assessment of writeup for materials available and make Service Manager aware of shortages., • Notify Service Manager when parts need to be expedited., • Suggest any additional repairs needed to Service Manager and/or customer., • Make a point to thank every customer. Communication with the customer is a key element of good relations., • Dress like a professional every day., • Periodically review product bulletins, catalogs, and parts book., • Attend company functions and meetings, visiting with customers., • Help maintain cleanliness, neatness and safety of building and lot., • Do not second-guess other technician’s work., • Do not assume any liability or place any blame on the company, manufacturers, or other technicians., • Stay current with technical changes., • Give special attention to repeat repairs or comebacks to correct problems and avoid future shop comebacks and unnecessary expenses., • Help control expenses and produce as much quality work as possible., • Treat the customers and co-workers in a friendly, courteous manner. Always represent Certified Power as a professional Service Technician., • Supply own hand tools in a neat and professional chest. PHYSICAL AND MENTAL DEMANDS: • Frequently required to stand at a workstation for long period of time., • Ability to lift 50lbs. when required., • Ability to speak to and hear employees/clients via phone or in person., • Body motor skills sufficient to enable incumbent to move around a shop environment., • Use chemicals with PPE, adhesives, solvents, lubricants, epoxies, paints, and inks as required. WORKING ENVIRONMENT: • Work hours average 40 per week; may require additional hours including evening and weekends depending on business needs., • Standard work hours for the service department are Monday through Friday, 7am – 4pm., • Basic hand tools including but not limited to allen wrenches, adjustable wrenches, box end wrenches, screw drivers, hammers, sockets, and ratchet wrenches., • Power and pneumatic tools including but not limit to angle grinders, die grinders, air drills, air chisels, Impact wrenches, torque multipliers, torches, band saw, electric drill, circular saw, cranes, and forklift., • High school diploma or GED, • 2-year fluid power degree or equivalent experience., • Ability to drive and be certified to drive a forklift, • Must be 18 years of age or older.

Job DescriptionDescription: We are GATR Truck Center and we are the Truck Expert in the Midwest! Body Shop Manager – Only the Bold Need Apply Are you ready to manage a team that rebuilds, restores, and revitalizes every truck that comes through our doors? We're on the hunt for a fierce, experienced, no-nonsense Body Shop Manager in our Waukee, IA location who can handle the heat and lead with precision. Benefits Include: • Competitive Pay, • 401k + up to 6% company match, • Paid Training / Tuition Reimbursement, • Company paid Life Insurance for you, spouse or child, • Medical, Dental, Vision, • Health Savings Account, • Paid Time Off, • You've got a lot of hustle., • A people leader who also knows cars / trucks like the back of their hand – and doesn't flinch when the job gets gritty and your fingernails get dirty., • 5+ years in body shop or collision repair management? We thought so. Certifications? That's even better., • Own every aspect of shop management, from people, to repair quality to customer satisfaction., • Keep an eagle eye on the workflow – balancing efficiency, quality, and speed., • Lead, motivate, and train a powerhouse team., • Competitive pay because talent like yours deserves it., • A shop that doesn't just run well – it roars. *This position may be considered safety-sensitive if the candidate holds an active CDL. GATR Truck Center is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Company Description: hth companies is an industrial services provider offering mechanical insulation, scaffolding, industrial cleaning, and various other services to meet our customers' needs across the Midwest. At hth companies, we continue to promote the merit shop philosophy we were founded upon in 1984; rewarding employees based upon their merits of skills, productivity, and quality workmanship. Our vision is to be an organization that creates an environment where employees are encouraged to develop their full potential to provide quality work. We strive each day to better serve our customers and employees. Position Overview: The Travel Millwright will repair, maintain, and facilitate installation of industrial equipment used in manufacturing and production operations. The Travel Millwright will install, dismantle, repair, reassemble, and move equipment on work sites. They will work on pumps, compressors, gearboxes, conveyors (screw/paddle/belt), values and piping, etc. They must be able to read highly technical instructions and blueprints on equipment systems. Knowledge on how machinery works so repairs can be made when needed. Must be willing to work in various conditions (wet/dry, clean/dirty, hot/cold, inside/outside). Candidate will use a variety of hand and power tools, such as impacts, wrenches, as well as equipment for welding, brazing, and cutting. Responsibilities and Duties: • Ensures proper operation of large industrial equipment such as power generators, turbines, mining devices, assembly line machinery, and machinist tools., • Uses hand tools, hoists, jacks, spud wrenches, micrometers, laser alignment and power tools to assemble, install, align, and adjust piping, valves, pumps, and other various equipment., • Ensures machines perform to specifications by conducting tests; modifies and fine tunes machines., • Dismantling of existing connected and independent equipment., • Gathers and assembles parts for repairs or modifications based on blueprints., • Troubleshoots and repairs machines including when unexpected issues arise., • Performs preventive maintenance makes repairs on older machines., • Provides advice and recommendations to management concerning new machinery., • Plans and facilitates installation of new or refurbished machinery, which may include building platforms and foundations., • Conducts safety inspections of facilities., • Maintains records, including safety logs and inspection details., • Assist with jobsite safety to comply with all OSHA regulations and the hth companies' Safety Program., • Actively champions a positive workplace and safety culture. Education and Experience • Basic math skills., • Ability to use a variety of tools, which may include blowtorches, saws, pipe benders, and welding torches., • Thorough and broad understanding of a variety of equipment., • Ability to read and understand blueprints and schematics., • Strong analytical and problem-solving skills., • Thorough understanding of safety practices, guidelines, rules, and laws., • Ability to read schematics and blueprints., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Working understanding of safety principles, practices, and procedures., • Excellent time management skills with a proven ability to meet deadlines., • Ability to function well in a high-paced and at times stressful environment., • Excellent organizational skills and attention to detail., • Ability to problem solve and develop solutions., • Follows directions of manager / lead / superintendent and clarifies responsibilities if needed., • Respects self, co-workers, managers, company, other contractors, and clients., • Adaptable in methods used to complete task., • Always have a support and teaching mindset., • Ability to read, analyze, and address complex data or situations., • Excellent communication skills - maintaining professionalism when communicating with staff and prospective employees alike., • Willing to go the extra mile., • Motivated to learn new skills., • Respects self, co-workers, managers, company, and prospective employees., • Shows up on time ready to complete work., • Ability to lift, push, pull and move up to 50 lbs. on a routine basis., • Ability to climb Ladders and stairways regularly throughout the work shift., • Ability to observe conditions and others as safety attendant staying alert while seated for long periods of time as needed., • Ability to use hand tools, power tools, and other tools and equipment in a safe and controlled manner., • Ability to perform inspections of site, tools, and equipment., • Ability to perform behavioral observations focused on safety and process improvement., • Employer Supplemented Health Insurance., • Employer Paid Life Insurance., • Voluntary Vision and Dental Insurance., • Voluntary Critical Illness and Group Injury Insurance., • 401K (Company Match of 3%).

Job Description PURPOSE The Mechanical BIM/VDC Detailer will develop 3D models, partnering with the construction team to coordinate and clash model content. Using the coordinated model, the BIM/VDC Detailer will produce spool, coordination, and install drawings, as well as review completed work, to include checking for errors and verifying against contract documents. This person will create and develop relationships supportive of the Baker Group Core Focus with internal team members and external clients, as well as maintain and grow the “Client for Life” concept with new and existing clients. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Create 3D BIM drawing models for plumbing and mechanical piping systems., • Produce spool sheets, shop drawings, installation drawings, material lists, and point layout files for fabrication for field staff., • Produce coordination files and point loads and coordinate piping and plumbing systems with other trades, • Effectively communicate to provide updates to Project Managers, Project Engineers, field Foremen, Shop Foreman, General Contractors, and other team members during construction process., • Provide updates to Project Managers, Detailing Team Leaders, field Foremen and other team members by attending coordination and internal BIM meetings., • Attend industry related educational courses and/or conferences and review new related software to stay abreast of current trends, products, productions tools and best practices and share knowledge gained with peers. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Minimum of five years in the plumbing and steam fitting apprenticeship, • Minimum of five years of directly related experience which aligns with the essential functions responsibilities outlined, • Thorough knowledge and understanding of plumbing, piping, and HVAC piping systems CERTIFICATES, LICENSES, REGISTRATIONS • Plumbing and hydronic license, • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Excellent organization and communication skills, • Ability to perform quickly and effectively under pressure and deadlines, • Proven dependability, • Strong problem solving and leadership skills, • Must be proficient in Revit, Navisworks, ACC, Stratus, Excel, Bluebeam, and Outlook, • Ability to read construction documents, product literature, specifications and cut sheets, • Strong mechanical aptitude and good math skills, • Proven ability to partner with design teams and field personnel, • Ability to work on multiple projects and multi-task effectively ENVIRONMENTAL ADAPTABILITY Typical office environment. At any given time, may be exposed to: • Prolonged periods of sitting at a desk working on a computer, • May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature, weather and construction site conditions EQUIPMENT/TOOLS

Job Description Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Cleaver Brooks Sales and Service is looking for a Service Manager to join our team. The Service Manager will coordinate the daily direction of a service department made up of a group of specialty mechanics, technicians, and welders. Coordinate company technical resources to ensure appropriate solutions are offered. This is a direct customer facing position. Must be able to multi-task and respond to customer’s emergencies with technical resolutions. Excellent communication and interpersonal skills are required. Job Location: Des Moines, IA Essential functions: • Develop and write proposals based upon customer needs., • Reviews JSA’s, safety audits, and responsible for the safety of personnel in the shop and on the job site., • Continual development and evaluation of employees., • Review service tickets daily for accuracy of technical completion, procedures, time entry, and materials., • Manages job flow including manpower, scheduling, material availability, and dispatching., • Responsible for monitoring costs and job status., • Schedules training for employees on an as needed basis., • Manages employee discipline and adherence to company policies. Education: A High School diploma or equivalent is mandatory. Technical degree preferred. Experience: Must have 5+ years prior experience working as a boiler service technician on commercial/industrial steam and hot water boilers with strong electrical and controls capabilities. Computer competency including Outlook, Word, Excel, and Teams are required. Physical Skill & Effort: • Work requires computer proficiency, • Willingness / ability to work after hours, weekends, and emergency hours as needed, • Willingness / ability to travel domestically as needed, • Must have the ability to work independently with little direct supervision Normal office conditions. Customer visits may include exposure to site specific hazards and safety requirements. Work environment may include dusty and hot conditions. Benefits of being a Cleaver-Brooks Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Job Description Job Summary Duke Rentals is seeking a Heavy Equipment Shop Mechanic at our Des Moines, IA location. This role includes preventative maintenance, troubleshooting mechanical systems, and ensuring equipment meets safety and manufacturer standards. We offer competitive pay, strong benefits, and opportunities for training and advancement. PAY: $22.00 - $32.00 per hour STARTING - Based on Experience Bonus programs available! Schedule • Full-time, • Monday – Friday, • Diagnose and repair heavy equipment and machinery, • Ability to operate a variety of aerial lift equipment & related tools, • Service hydraulic, electrical, and mechanical systems, • Perform preventative maintenance and inspections, • Ensure compliance with OSHA, ANSI, NFPA and manufacturer standards, • Maintain service records and documentation, • Coordinate repairs with shop supervisor and parts department, • High school diploma or equivalent, • Valid driver’s license with clean MVR, • 3 years of experience in equipment repair or mechanical service, • Strong mechanical troubleshooting skills, • Working in indoor and outdoor environments, • Exposure to shop chemicals, grease, oils, and equipment noise, • Lifting up to 100lbs occasionally, • 401(k), • Health, dental, and vision insurance, • Paid time off, • Disability insurance, • Bonus program Job Type: Full-time Schedule: Monday – Friday | 6AM – 5PM | Overtime Available Work Location: In person | Des Moines, IA #hc192239

Job Description PURPOSE The Mechanical Designer will specialize in project design documentation for the design build industry, with a focus on the food and beverage, refinery, research laboratories, agricultural, power, and other industrial markets. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. • Work with engineers to produce clear, complete, detailed and accurate construction documents, utilizing CAD software, • Develop design drawings for engineering, shop fabrication and field installation of industrial systems, • Produce general arrangement drawings for review by project team and customers and to be included in construction documents., • Create preliminary 3D models using AutoCAD to show equipment, piping, and specialties for review by customers and use by detailers, • Develop 3D objects from cutsheets and submittals in AutoCAD as required for project design needs, • Stay updated with new technologies that innovate and improve CAD skills and processes by attending continuing education opportunities, • Coordinate with designers of other trades/business units MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Minimum of five (5) years related experience, • Two-year Associate’s degree in CAD design preferred, • Industrial experience is preferred, • Design/Build project experience preferred, • Experienced with design of hydronic, process piping, and industrial process systems, • Proficient with AutoCAD and Navisworks, • Familiarity with process flow diagrams, Process and Instrumentation Drawing (P&IDs), General Arrangement Drawings, and 3D BIM modeling, • Experience with or ability to learn AutoCAD MEP, Plant 3D, Smart PID preferred MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Passion for Design/Construction, • Ability to work collaboratively with clients and Team Members at all levels of the company, • Excellent verbal and written communication skills, • High level of concentration to mentally work through issues, • Ability to meet project deadlines, • Proven problem-solving ability ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions, • Position may require travel Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description ***In addition to standard technician duties, this role will be responsible for electrical assembly, wiring, and testing of robotic underground sewer inspection equipment. Essential Duties: • Builds knowledge of dealer supported product lines, service standards, and procedures and keeps abreast of all changes in various models of equipment sold and serviced by the distributor., • Perform work as outlined on repair order with efficiency and accuracy, in accordance with Service shop and Factory standards., • Vehicle inspection including factory warranty repairs, computer diagnostics and programming., • Attend local, regional, and national service schools and training sessions as requested., • Maintain a clean, safe, and professional work environment not only in shop but also at customer sites., • Utilize various equipment and tools to include, but not limited to hand tools, power tools, testing/diagnostic equipment, cranes and hoists., • Foster close, positive working relationships with all service, parts and administrative personnel., • 2-year Diesel Technician/Mechanic degree or equivalent experience., • Minimum 3 years working in a full-time technician/mechanic role on heavy duty chassis., • Valid driver’s license with acceptable driving record, • Previous experience with electrical wiring, • Hydraulic, pneumatic, and electrical experience, • Welding/cutting torch experience, • Excellent skills in communication, interpersonal, organizational and attention to detail, • Direct industry experience, • Bend, squat, climb, grasp, twist, reach, lift or otherwise move frequently for extended periods., • Lift, move or otherwise transfer up to 50 lbs. frequently, or more occasionally., • Walk, stand, or otherwise move about continuously., • Typically sits, grasp items and performs keyboarding for occasional operation of a computer., • Exposure to typical machine shop physical hazards including chemicals which may require respiratory protection. This job description is intended to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. MacQueen will reasonably accommodate the known disabilities of qualified disabled individuals. MacQueen is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color or creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, pregnancy, affectional preference, disability, age, marital status, familial status, protected veteran status, status with regard to public assistance, membership or activity in a local commission dealing with discrimination, or any other protected class status. All candidates to whom an offer is made will be required to pass a criminal background check and drug test.

Job DescriptionSalary: Cloud Contents is a company leading personal property restoration. We specialize in working with customers and clients damage in a home or business caused by fire, water and mold. We are seeking to add a Team Member to be apart of the production team! Our company strives to build leaders on multiple levels. We invite you to be a part of our team! Project Coordinator Job description You will meet with customers and clients on job sites to offer services during a catastrophic life event. You will assess damages and write up a report of the loss, so an estimate can be written. Teams will then complete projects and perform work. Once the project is sold you will oversee and coordinate the project from start to finish while meeting customer timelines. Scheduling teams to complete the project and provide any clarification. While keeping the project within budget. You will have a weekly and monthly billing goal. Once the project is finished obtain signatures for work completion. Provide regular project progress to homeowner or client to ensure customer satisfaction. The Project Coordinator will also share responsibility of the Team work at facility when Lead of Department absent. For this position, you will start off as a Field Technician to understand the restoration process before becoming a Project Coordinator. Project Coordinators Roles and Responsibilities include: • Material evaluation to set up a list of what needs to get done at a home owner's place to restore through cleaning, • Get process quotes from Claims Coordinator, • Track process of clean ups, • Confirm customer availability for upcoming schedule., • Communicate and confirm schedules with labor., • Obtain before and after pictures from Shop Technicians and add to job file. Preferred Qualifications • Bilingual in Spanish, • Managing, supervising or coordinating experience is a benefit., • Communicate and work effectively with all parties involved., • Ability to analyze client and customer needs., • Valid drivers license is required with driving background check (Required)., • Ability to drive the company vehicle at or after the 3rd month of performance (if not before)., • Health, Vision, and Dental benefits, • 410K with company contribution, • Company vehicle for drive to job sites, • Company phone When you fully transition into a project coordinator, your pay will transition into $50,000 + commission yearly

Job DescriptionOur client is looking for a Diesel Mechanic, the primary purpose of this position is to provide basic mechanical, repair, maintenance, and other related services to the customers. This person must have a clear understanding of routine and complex truck and trailer repair processes, routine maintenance tasks, shop techniques and practices, parts, materials and the operation, use, and basic repair of basic shop equipment. Performs assigned duties and tasks to meet Company standards and customer satisfaction. This position reports to the Shop Supervisor but may receive work instructions for specific assignments from a lead mechanic or technician. Duties and Tasks • Assists Mechanics with completing complex mechanical truck and trailer service, maintenance, and repairs, on all makes and models of trucks and trailers, including, but not limited to working with the following mechanical systems: engine, electrical, drive train, tire, steering, suspension, refrigeration units, etc., • Performs vehicle and trailer inspections according to DOT standards and understands what is necessary to bring identified basic deficiencies into compliance., • Performs routine and complex vehicle fluid and filter checks and replacements. Checks these systems according to manufacturer’s specifications and replaces fluids and filters with appropriate materials and according to company standards., • Conducts routine vehicle and trailer electrical inspections. Makes routine replacements of fuses, bulbs, batteries, etc. Makes routine and complex electrical repairs, installations and replacements., • Informs Supervisor regarding problems or difficulties encountered during troubleshooting repair or maintenance procedures. Discusses any problems, complaints, requests, or ideas with the Supervisor., • Assists the Shop Supervisor with training other mechanics working in the shop., • Assists with managing the stock and equipment inventories as assigned to the shop. Takes and reports physical counts of stock inventory according to schedule established by the Shop Supervisor. Notifies Shop Supervisor when stock inventories are approaching reorder points., • Will be required to utilize shop software on a daily basis which includes: creating jobs, clocking in and out of jobs, accurately entering all parts used on jobs, and entering all notes efficiently and thoroughly., • Uses shop equipment in an appropriate and safe manner. Follows safety procedures to minimize risk of damage to property or personal injury. Especially uses precaution when working around explosive materials, solvents, and when removing or replacing gas tanks.Qualifications, • Requires valid current Iowa driver’s license., • Employee must have the ability to drive all types of trucks, including manual transmissions., • Three to five years of experience with diesel truck repair is preferred, but 2 years of experience is required., • Employee must be able to lift up to 100 lbs., • Employee must have the ability to write a work order., • All employment is contingent on passing a pre-employment drug test., • Employee understands all employees must submit to random drug/alcohol testing if they are randomly selected throughout the year, at no cost to the employee., • Ability to read technical diagrams and manuals., • Requires working knowledge and ability to use mechanical tools and equipment such as wrenches, lifts, etc., • Working knowledge and ability to use diagnostic and repair tools and equipment., • Prefer High School Diploma or equivalent with tech school training or two years related experience.

Job DescriptionDescription: Mechanic: Mechanic is responsible for all maintenance of the TD&I Cable Maintenance fleet of vehicles, trailers, and equipment. Ensures the fleet receives regular maintenance and executes emergency/on-the-road repairs. Communicates with team of mechanics and management on strategies for improving maintenance efficiency and reducing vehicle downtime. Ability to travel to other office locations and/or job sites to assist with vehicle, trailer, and equipment repairs. Responsibilities: • Documents information of all maintenance or repairs using the designated fleet management system, • Service pick-up trucks, semis, plows, drills, mud suckers, aerial equipment's, mini excavators, skid steers, trailers, water truck systems, etc. (Vermeer, Ditch Witch, Bobcat), • Performs regular preventive maintenance, including annual DOT inspection, • Assesses vehicles and machinery to properly diagnose and repair issues, • Accurately, timely, and cost-effectively orders parts for repairs, • Coordinates with outside vendors to arrange preventive maintenance and repair services when needed, • Maintains and cleans garage equipment and tools to ensure they are kept in a safe and usable condition, • Assists with various shop tasks – welding, fabrication, forklift needs, lot organization, snow removal, building maintenance, customer service, etc. Requirements: Requirements: • Proven experience as a Mechanic (automotive and diesel), • Valid DOT Medical Card to operate a commercial vehicle (10,000 lbs. or under), CDL license is a bonus, • Forklift certification or ability to become forklift certified, • Excellent organizational and leadership skills, • Ability to communicate and report effectively, problem solving abilities, • Good physical condition and stamina, able to work indoors and outdoors, • Personal computer (PC) experience and familiarity with Microsoft platforms (Outlook, Excel, Word, PowerPoint)

Job DescriptionEconolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. Under general direction, the successful candidate will lead and support the ITS performing skilled work in the installation, troubleshooting and maintenance of traffic signals and other Intelligent Transportation System (ITS) devices. DUTIES • Perform the maintenance function for ITS devices and related equipment, and perform basic troubleshooting of both wiring problems in cabinets as well as underground., • Understand and program video detection systems; install knockdown temporary/permanent replacement poles, signal heads, street lighting and/or combination of these items., • Troubleshoot and repair wiring problems on the highway, up to and including the replacement of conductors in conduit; test and splice loop detectors., • Assist in the training of new technicians; perform all job functions of Maintenance Technician and Maintenance Technician Trainee., • Perform all job functions of Utility Technician and any other assignments as requested., • Scheduling of subcontractors for subcontracted work, including electrical and Remote Weather Instrumentation System (RWIS) contractors, and/or conduit installation contractors., • Serves as a proactive customer service & quality ambassador of The Econolite Group, Inc. by representing the organization in a positive, professional manner to support The Brand Promise., • High School diploma or equivalent., • Must have a valid Driver’s License and an acceptable DMV record., • One (1) to Five (5) years of video or cabling experience preferred., • Knowledge of tools, equipment, practices, and methods used in installing, maintaining, and repairing ITS devices and associated equipment preferred; Video Detection configuration, troubleshooting and repair experience highly desired., • Knowledge of principles and practices of traffic control guidelines, both state and local, in addition to pertinent federal, state, and local codes, laws, and regulations regarding electronics, • Knowledge of Occupational Safety and Health Administration (OSHA) regulations., • Must be able to stand, walk, squat, and bend at the waist for extended periods of time, • Safety sensitive position—will be required to work at busy traffic intersections, • Required to drive up to five hours a day; ability to lift and carry up to 40 pounds All candidates who accept employment will be subject to a background investigation and drug screening. For applicable roles, candidates who accept employment will also be subject to a Motor Vehicle/Driving Record screening. For this role, a Department of Transportation (DOT) Physical Exam will be conducted by a licensed medical examiner and issued a medical examiner’s certificate, valid for up to 24 months. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Other voluntary benefits include: Identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran’s status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description MGX Shop Crane Technicians are responsible for the inspection, diagnosis, repair, and maintenance of various crane equipment including mobile cranes and boom trucks. This position reports to the Service Manager. Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year. Relocation assistance may also be available to those who qualify. ESSENTIAL JOB FUNCTIONS: • Operate and perform thorough inspection of cranes in order to diagnose defects., • Diagnose, repair and troubleshoot various mobile hydraulic and lattice cranes; repair hydraulic and electrical components., • Examines parts for damage or excessive wear using micrometers and gauges. Reads, understands and interprets operating and parts manuals, blueprints and technical drawings., • Tests mechanical, electronic, electrical and hydraulic products and equipment after repair or modification to ensure proper operation and compliance with OEM specifications., • Prepares for jobs by checking parts and drawings for accuracy and completeness., • Perform thorough and accurate annual inspections., • Properly fills out working reports, hours reports, time sheets, hours overviews and expense reports., • Capable of accomplishing tasks independently without direct supervision., • Provides excellent customer service. High School Diploma or GED with a minimum of two (2) years of experience as a Crane Mechanic/Technician preferred. * Experience working with different forms of mobile crane equipment, specifically Grove RT & TMS Cranes; Grove GMK European Cranes; Manitowoc EPIC and/or Traditional Cranes; National Boom Trucks preferred. * Must be able to read both electrical and hydraulic schematics. * Must have excellent communication skills with a customer/client focus. * Possession of a valid driver’s license with a satisfactory driving record preferred. * Basic computer skills preferred. * Required to purchase full set of hand tools up to 1.5 inches. HEALTH & SAFETY REQUIREMENTS: * Perform job functions in a safe manner. * Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. * Know and follow established job specific and facility wide safety and health procedures and rules. * Actively participate in safety and health training and demonstrate competency based on training received. * Bring safety and health issues, unsafe acts, and safety suggestions to management’s attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 4:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: * Competitive total rewards package including benefits and 401(k) beginning day one of employment. * Continuing education and training opportunities; tuition reimbursement for those who qualify. * Vacation and Holiday Pay * Paid Parental Leave * Team building, engagement events, and community involvement * Scholarship Program * And much more! You should be proficient in: • Equipment Troubleshooting, • Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Aerosol/Propellant Experience, • Heavy Material Handling, • CNC Machine Setup & Changeover, • Ground Support Equipment (GSE) Operations, • Aerial & Utility Equipment Systems, • Excellent Communication Skills, • Blueprint Reading

Job Description Elliott Aviation, a leader in aircraft solutions, has an exciting opportunity for a Service Technician at their location in Des Moines, IA. Since 1936, Elliott Aviation has been a world-class provider of customer-focused solutions for business aviation. In the world of business aviation, where precision, reliability, and world‑class service define every mission, our Technicians play a pivotal role in keeping aircraft looking and performing at their best. If you're energized by cutting‑edge technology, thrive in fast‑paced environments, and take pride in ensuring every detail and system is flawless, this is your opportunity to join a team that values expertise, initiative, and a passion for excellence. With every aircraft you touch, you'll help deliver the safety, performance, and experience that our clients expect. GENERAL SUMMARY: In this essential role, you'll be part of a skilled service team responsible for inspecting, troubleshooting, and servicing aircraft to ensure peak performance and regulatory compliance. From routine checks to hands‑on mechanical repairs, you'll play a critical part in maintaining the integrity and safety of every aircraft that enters our facility. As an Aircraft Service Technician, you'll work with advanced tools, technical manuals, and diagnostic equipment to identify issues, perform preventive maintenance, and support a wide range of mechanical, electrical, and hydraulic systems. Every day brings new challenges, new skills to learn, and the opportunity to directly impact operational excellence. If you're mechanically inclined, safety‑focused, and excited to grow your career in aviation maintenance, this role offers a dynamic environment where your expertise truly matters. PRIMARY RESPONSBILITIES: • Perform routine and scheduled aircraft inspections in accordance with FAA regulations and company maintenance programs., • Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, and pneumatic systems., • Conduct preventive maintenance to ensure aircraft are safe, airworthy, and ready for service., • Read and interpret technical manuals, engineering documents, service bulletins, and maintenance logs., • Remove, repair, and reinstall aircraft components such as panels, control surfaces, and landing gear., • Utilize specialized tools and diagnostic equipment to verify system performance and resolve discrepancies., • Accurately complete maintenance records, work orders, and compliance documentation., • Collaborate with fellow technicians, inspectors, and supervisors to meet project timelines and operational requirements., • High school diploma or GED, • 4+ years related experience in aircraft maintenance, mechanical systems repair, or technical troubleshooting, • Experience in an MRO, airline, or aerospace maintenance environment, • FAA Airframe & Powerplant (A&P) certificate or enrollment in an A&P program, • Familiarity with FAA Part 145 operations and documentation, • Strong understanding of basic mechanical, electrical, and hydraulic principles, • Ability to read and follow technical manuals, schematics, and regulatory documentation, • Proficiency using hand tools, power tools, and diagnostic equipment, • Basic computer skills for documentation and work order entry, • Strong safety awareness and ability to handle tools and materials safely, • Ability to routinely lift up to 50 lbs., work in confined spaces and in noisy environments, • Ability to occasionally travel for work assignments, • Ability to maintain a tool inventory in alignment with shop requirements, • Ability to obtain and retain an airport AOA badge, • Ability to work overtime and various shifts as business needs requireWHY JOIN ELLIOTT:At Elliott Aviation, you're not just joining a company, you are becoming part of a legacy built on service, craftsmanship, and trust. For over eight decades, we've set the standard in aircraft services, delivering world-class craftsmanship and personalized solutions that keep our customers soaring. Here, your ideas matter, your expertise shines, and your career takes flight.Des Moines offers low cost of living, minimal traffic, and excellent outdoor recreation with lakes and hunting nearby. The area offers everything from downtown living to rural countryside.We offer:, • Benefits on Day 1, • Sign-On Bonus, • Relocation assistance, • Comprehensive healthcare coverage, • FREE Generic prescriptions, • Paid time off and paid holidays, • 401(k) Company Match, • Technical and professional development Join a team where passion for aviation meets a culture of excellence and help us shape the future of flight.

Job DescriptionDescription: Shive-Hattery is a premier architecture and engineering consulting firm headquartered in Cedar Rapids, Iowa. In total, the firm has 16 offices across the US. Shive-Hattery was founded in 1895 and has earned and maintained a strong reputation for excellence in client focus, quality service and communication. The firm prides itself on its One Firm, full-service offering; placing the best people with their clients, no matter the project location. Shive-Hattery's West Des Moines IA office has an immediate opportunity for a licensed Structural Engineer with 5 to 10 years of experience in the design and leadership of structural engineering projects. Design projects as a structural engineer for industrial, commercial, and education projects of various sizes with the main focus on industrial projects. Work with experienced engineers and technicians while coordinating work within multi-discipline teams. The majority of efforts will focus on our long-standing industrial clients who we work with locally and nationally. • Lead the structural design portion of projects, make design recommendations and decisions, and oversee the completion and quality of construction drawings, specifications, reports and other project documentation., • Establish and manage structural scope, schedule, and budget., • Mentor and teach other team members., • Lead the structural design of a project from schematic design through construction documents for both single-discipline and multi-discipline projects., • Interact with and be a representative of the company with clients and contractors as it relates to on-going projects., • Work on multiple projects simultaneously. You will find the right balance at Shive-Hattery. A large pool of resources in a 500+ person design firm, with a small firm feel where you build personal connections with colleagues, partners and clients. Flourish as a professional with the freedom to chart your own course and make an impact – and Design What Matters to make the world a better place. Our learning and teaching culture is founded on collaboration. You will learn from and teach other employees while working across disciplines. You will grow your skills and continue your professional growth at Shive-Hattery. Shive-Hattery offers an outstanding and competitive total compensation package including competitive pay and over 35 different benefits. Benefit Highlights • Medical, Dental, Vision – 4 tiers of coverage, • Voluntary Life Insurance – Employee, Spouse, and Child, • Voluntary Insurance Plans – Accident, Critical Illness, & Hospital Indemnity, • FSA – Medical & Dependent Care, • 8 Paid Holidays + PTO, • Paid Parental Leave, • 401K/Roth 401K with Company Match, • Overtime Bonus, • Profit Sharing Bonus, • First Time License Bonus, • Tuition Reimbursement & Licensure/Certification Financial Support, • Professional Development Opportunities, • Calm Meditation & Stress Relief Subscription, • …And Many More! U.S. Citizen, U.S. Person, or Immigration Status Requirements: • At this time, we are unable to provide visa sponsorship now or in the future. Candidates must have current and ongoing authorization to work in the United States without employer sponsorship.Shive-Hattery offers a flexible work environment and supports balancing personal and professional responsibilities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Requirements:, • Education: Bachelor's degree in engineering from an accredited program, • Experience: 5 to 10 years of experience in the design and leadership of structural engineering projects., • License/Certification: Professional Engineer licensure in Iowa or the ability for immediate licensure in Iowa, • Proficiency with Autodesk Revit and Microsoft Office, • Structural design experience using concrete, steel, and masonry. Wood design would be a plus., • Experience and willingness to provide direction to young engineers and designers, along with collaborating with other disciplines., • Must be able to drive and have access to an automobile, climb ladders and work off of elevated platforms and open grating, and wear personal protective equipment required for specific clients and sites., • Ability to manage time and workload effectively, which includes planning, organizing, and prioritizing work., • Must have good attention to detail., • Experience using 3D software (Navisworks/Recap), and other structural engineering design software is preferred.

Job DescriptionFoth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 700 members across 31 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart, caring team of colleagues, consider joining us at Foth. Join Our Team as a Water/Wastewater Engineer! Are you ready to make a significant impact on the future of municipal and utility systems? Foth is on the lookout for a self-driven and team focused Water/Wastewater Engineer to support innovative projects that enhance community infrastructure. The position can be based out of our Iowa office locations in Des Moines or Cedar Rapids. Primary Responsibilities: • Perform technical engineering discipline lead for water transmission, distribution, sanitary sewer collection, wastewater conveyance, and/or water system project designs and system analysis, • Provide technical consultation to municipal clients on their sanitary sewer system management, watershed planning, capital improvement plans, green infrastructure, pumping stations, and best management practices, • Develop water and wastewater system reports and community-wide master plans., • Participate in capital improvement plans for growing Midwest communities., • Lead a hydraulic analysis team for pressure pipe modeling, transient analysis, pump station analysis, and gravity sewer modeling., • Prepare design plans, specifications, and bid documents for water and wastewater systems., • Provide construction support services, including shop drawings, pay estimates, progress meetings, and construction services.Required Qualifications:, • Bachelor’s Degree in Civil or Environmental Engineering., • Professional Engineer (PE) License., • 3+ years of experience in utility system analysis, sanitary sewer collection, drinking water systems, and /or wastewater conveyance municipal infrastructure improvements. Technical report writing.Preferred Qualifications:, • 8+ years of experience in municipal engineering, wastewater, sanitary sewer, and/or municipal projects as a technical producer, project manager, and/or client contact., • Experience with sanitary and drinking water master planning and modeling software (e.g., SewerGEMS, WaterGEMS, XPSWMM, ArcGIS).