Systems integration engineer jobs in Dayton, OhioCrear alertas

Job Description Education: BS Electrical Engineering, or Computer Science Full Job Description: Vapor Systems Technologies, Inc. is seeking a full-time, direct hire engineer to support all departments in defining, developing, and sustaining products and production equipment for the retail fueling industry. The ideal candidate will have expertise in the design of analog and digital PCBs for applications involving 120 VAC, relay and solenoid control, intrinsically safe environments, and resilience to high voltage transients, ESD, voltage surges, and grounding issues as well as mixed-signal circuit design, power electronics, and EMC compliance, with proficiency in specified design tools. Experience with Programmable Logic Controllers (PLCs) for interfacing with industrial control systems is a plus. Job Responsibilities: Production Support: · Collaborative effort with other engineering entities to design, build, and validate new production support equipment. · Troubleshoot production equipment as required to identify problems and implement corrective measures. · Continually evaluate production equipment and processes to identify areas of improvement. · Identify and maintain a critical component inventory to ensure quick repairs of production equipment. · Preferred ability in programming PLC, HMI, Motion Control, Pneumatics, Hydraulics, and other types of electronic devices. Product Development: · Able to take lead role in electrical component identification, digital and analog circuit design/analysis, PCB design, CAD documentation, and programming requirements of machine controls for VST proprietary equipment as necessary. · Clear and concise communication with company management on responsibility developments. · Write functional design requirement specifications, including safety standards, which can include hazardous location requirements based on expected functionality. · Involvement in defining software testing requirements and procedures. · Limited travel as required. Qualifications: To perform this job successfully an individual must be able to perform the above duties. The requirements below are representative of the conditions, knowledge, skill, and/or ability required to perform the essential functions of this job. Required Education, Skill, and Experience: • Digital and Analog Circuit Design and Analysis: Expertise in designing mixed-signal circuits for 120 VAC systems, including relays and solenoids, with analysis using OrCAD, PSpice, or LTspice., • Printed Circuit Board (PCB) Design: Proficiency in PCB layout for high-voltage and mixed-signal systems, ensuring IPC-2221 compliance, using KiCad, Altium Designer, EasyEDA, or Eagle., • Power Electronics Converters: Knowledge of AC-DC, DC-DC, DC-AC converters, and motor drive circuits for efficient power management., • EMI/EMC/RFI Design and Mitigation: Expertise in EMI/RFI attenuation, filter design, and surge suppression, compliant with IEC 61000-4 (e.g., IEC 61000-4-2, -4, -5)., • ESD and High-Frequency Transient Suppression: Proficiency in designing circuits to withstand ESD and transients, including snubber circuits for inductive loads., • Intrinsically Safe Design: Familiarity with ATEX, IECEx, or UL 913 standards for hazardous environments, using IS barriers and energy-limiting techniques., • Grounding and Noise Mitigation: Expertise in grounding techniques (e.g., star grounding, ground planes) and signal integrity for noise reduction., • Safety and Regulatory Compliance: Knowledge of UL, CE, NEC, and hazardous location certifications., • Testing and Validation: Proficiency in testing PCBs for functionality, EMC, and reliability using oscilloscopes, multimeters, and spectrum analyzers., • Documentation and Collaboration: Strong skills in creating schematics, BOMs, and reports, and collaborating with mechanical engineers and a software programmer., • PLC Experience (Desirable): Familiarity with PLCs (e.g., Allen-Bradley, Siemens, Unitronics) for interfacing PCBs with industrial control systems is a plus., • Schematic Capture and PCB Layout:, • KiCad, Altium Designer, EasyEDA, or Eagle, • Circuit Simulation and Analysis:, • OrCAD, PSpice, or LTspice for circuit simulation and transient analysis, • Compliance and Testing (Optional):, • Ansys SIwave or HyperLynx for EMI/EMC and signal integrity, • MATLAB/Simulink for power converter simulation, • Documentation and Version Control:, • Git for version control · Solid computer skills with a variety of software tools including Microsoft Office products. · Good verbal/written/technical communication. · Team player, able to take direction, and be self-directed. Qualifications: · Minimum of a Bachelor of Science degree in Electrical Engineering or Computer Science. · Minimum of 5 years of product development experience. · CAD experience using AutoCAD or SolidWorks. · Familiarity of Microsoft products: Word, Excel, Power Point, and Project. Company DescriptionVST is a growing privately held company in Springboro, OH. VST is a supplier of gasoline dispensing equipment for retail fueling outlets and is in need of an individual with an Electrical Engineering Degree. This person will become familiar with the entire VST product line, and all relevant in line production testing equipment. VST has primarily provided solution focused on the US retail refueling market. With increased activities in the US market and Mexico emerging as a large international market potential, VST must grow our talent base to meet future market goals and growth opportunities.VST is a growing privately held company in Springboro, OH. VST is a supplier of gasoline dispensing equipment for retail fueling outlets and is in need of an individual with an Electrical Engineering Degree. This person will become familiar with the entire VST product line, and all relevant in line production testing equipment. VST has primarily provided solution focused on the US retail refueling market. With increased activities in the US market and Mexico emerging as a large international market potential, VST must grow our talent base to meet future market goals and growth opportunities.

Job Description DCS has an exciting opportunity for a Systems Engineer providing support to the Command, Control, Communications, and Battle Management Division (C3BM). Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. C3BM supports execution in many different focus areas. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space. The candidate will provide Systems Engineering assistance that applies a broad theoretical and practical knowledge of system engineering to the acquisition process. The candidate will also provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal). This is a full-time position that can be worked out of Wright Patterson AFB, Dayton, OH. Essential Job Functions: Candidate selected will be aligned to 1 of 5 Mission Integration Teams (MITs). The five mission areas are Air, Maritime, Land, homeland Air Defense, and Cross Cutting. Members of the MITs manage the DAF C3BM MIT Process for their respective MIT. The DAF C3BM MIT Process receives operational and functional requirements from the Operational Community and conducts a(an): 1. Operational Analysis to translate operational and functional requirements into technical requirements., 2. Architecture Definition to design the capability’s architecture while ensuring integration/interoperability with the broader DAF C3BM enterprise architecture., 3. Risk assessment of the capability, and if risk needs to be mitigated, the MIT works with the Science & Technology Community to address., 4. Execution management strategy providing the capability’s requirements to the Acquisition Community., 5. Test and Evaluation Strategy with the Acquisition Community to work with the Test and Evaluation Community for exercise and experimentation activities before delivery to the Operational Community. Serves a Mission Integration Team (MIT) system of systems architecture design and development engineers. Reviews current Department of Defense (DoD) architecture models and designs a migration path to a future state that enables seamless sensor-to-shooter connectivity. Drives interconnectivity between represented PEOs and weapon systems. Captures as is and to be states driven by MIT stressing engagement scenarios. Engages the joint and coalition community to design and evaluate an architecture that will connect any sensor to any shooter irrespective of service or coalition. Identifies, assesses, and matures innovative and affordable concepts meeting current and future AF needs through multi-domain expertise, analytics, and modeling, simulation & analysis tool development. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. Must have and be able to maintain an active Top Secret level clearance and be SCI eligible. Bachelor’s Degree and 8 years of experience. Familiar with cloud-based systems, including management and projection of cost and performance. Familiar with agile methods and CI/CD, DevSecOps and DevOps principals. Comprehensive knowledge of principles, policies and practices of systems acquisition and program management, as defined in DoDI 5000.02 and 5000.75, as well as knowledge of roles and relationships within the DoD and the Air Force. Possess knowledge of qualitative and quantitative techniques for gathering, analyzing, and measuring the effectiveness, efficiency and productivity of acquisition programs. Possesses the ability to effectively communicate orally and in writing, providing quality acquisition and program documentation including but not limited to briefings, documents, and plans. Desired Skills: Bachelor's or Master's Degree in a related field. 3+ years of experience and within the DoD sector.

Job Description00655-25 Data Integration Engineer Do you enjoy learning about new technology and how they can be used to provide cutting-edge services to DoD and Federal Government customers? If so, then look to join the Stellar Innovations and Solutions team. If you love technology and want a career making a difference supporting meaningful DoD and Federal programs, then Stellar Innovations is the company for you! Stellar Innovations & Solutions Inc. is seeking a Data Integration Analyst to join our government project supporting the Air Force onsite, at Wright-Patterson AFB in Dayton, OH. Responsibilities: This role is a unique blend of Data Architect, Data Analyst, Business Analyst, and Data Integration Engineer, focused on bridging the gap between complex technical systems and business needs within the Department of Defense (DoD) IT environment. The ideal candidate is a proactive problem-solver with strong communication skills who can work independently to investigate data paths, document system flows, and translate technical information for diverse audiences. This is a critical support role that reports directly to the Program Manager and acts as a key enabler for multiple technical teams. You MUST possess an Active Secret Clearance to perform this role, if you do not have one, we cannot move forward in the hiring process. • Technical Skill Set: Possess strong skills, especially scripting, in SQL and PL/SQL. Some shell scripting knowledge would be helpful. Experience with Oracle Database administration is highly desired., • Problem-Solving and Data Analysis: Use strong analytical skills to investigate and trace data paths across complex IT systems, ranging from mainframe legacy to modern cloud-based environments. This includes understanding where data originates and how it is used within existing code., • Technical-to-Business Translation: Take complex technical information and translate it into clear business needs and vice versa, effectively communicating with both technical teams and business stakeholders., • Data Integration and Modeling: Document data paths, perform data modeling, and assist with data transformation for reporting and analysis tools., • Independent Work and Initiative: Work independently with minimal supervision, taking initiative to interface with various technical teams and serve as a key support resource.Required Experience / Clearance / Certifications:, • Clearance: Secret Clearance, • DoD Approved 8570 Baseline Certification: Category IAT Level II (Security+ CE or higher). 4PIsnz8r4T

Job Description Electrical Engineer Dayton, OH Our client is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace, and defense industries. As a result of our continued growth, we are looking for energetic and personable professionals to join our team. Position Summary: As an Electrical Engineer, you will serve as an engineering & manufacturing subject matter expert across various programs requiring product design and development knowledge. Your knowledge and expertise will be widely applied across our broad client base from various industry domains such as aerospace, automotive, and other defense sectors. You will provide thought leadership around new technologies and methodologies while working with clients in defining the future state of their engineering and manufacturing strategies. The Electrical Engineer is responsible for designing, developing, and optimizing electrical systems and components used in manufacturing processes. As a key member of the Customer Engagement Team, the Electrical Engineer is responsible for executing against key milestones and deliverable timelines. This role requires client-facing interaction with project teams in meeting aggressive timelines and delivering effective Responsibilities • Plan and execute the development and refinement of 3D Technical Data Packages (3D TDPs) with a cross-functional engineering team to aid in part procurement and manufacturing activities, including value-added and reverse engineering activities, • Lead the design/re-design, development, and implementation of electrical components and subassemblies, ensuring optimal performance, safety, and reliability, • Conduct detailed electrical analysis, simulations, and modeling to inform on system performance., • Develop and maintain electrical schematics, wiring diagrams, and technical documentation., • Collaborate with cross-functional teams to integrate electrical components into electromechanical assemblies aligned with modern manufacturing processes, • Ensure electrical designs comply with industry standards (e.g., NEC, IEEE, IEC), DoD requirements, and company guidelines, • Troubleshoot and resolve electrical issues, applying corrective actions to prevent recurrence, • Identify and implement cost-effective solutions for system upgrades, retrofits, and new installations, • Provide technical leadership and training to junior engineers and staff., • Conduct feasibility studies, risk assessments, and cost-benefit analyses for electrical system improvements across multiple projects, • Engage with customers to understand user requirements and deliver solutions., • Support or perform schematic design, parts selection, analysis, simulation, testing, and schematic capture for controls and power electronics., • Perform board layout using industry tools (e.g., OrCAD PCB Editor) and support board procurement in regulated environments., • Support the build and test of prototypes, managing the full development cycle., • Design system architecture, including cables and buswork, and perform system integration analysis Requirements • Bachelor’s degree in Electrical Engineering or Computer Engineering, • 4+ years related engineering experience, • Proficiency in electrical design software and electronic interrogation of existing systems, • Ability to handle multiple projects and deadlines concurrently, • Proven experience designing, improving, and implementing electrical components and subsystems, • Experience with schematic design, analysis, simulation, and board layout, • Strong troubleshooting and failure analysis skills, • Experience with ERP systems (e.g., SAP, Oracle), MS Office, and data analysis tools, • Skills to communicate complex ideas effectively and work with business and technical stakeholders, • Excellent verbal communication, interpersonal, and influential skills, • Availability for travel to customer locations as required; estimated at 30% - client dependent Desired Qualifications • 2+ years team lead / engineering project manager experience, • Master’s degree in Electrical Engineering or related field, • Experience with prototyping and hands-on assembly of designed parts to find shortcomings and make improvements in the design, • Professional Engineer (PE) license or equivalent certification, • LEAN, Six Sigma, or other process certifications, • Experience with reverse engineering and technical report writing, • Exposure with a wide array of manufacturing processes and materials

Job Description STR is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Our programs deliver sustainable, reliable, and cost-efficient capabilities focused on end-customer needs that function in operationally relevant environments and timeframes. We consider the entire lifecycle of the solution, from conceptualization and architecting, through development to deployment, while leveraging novel technologies to deliver first-of-a-kind systems. We are seeking an RF Hardware Engineer to support the design, development, and implementation of advanced multi-function RF systems. You will collaborate with fellow researchers and engineers on multi-disciplinary teams to develop innovative solutions in areas of focus including exploration and demonstration of Radar and EW/RF convergence. In this role, you will design and implement RF hardware under the guidance of senior Engineers for operationally relevant environments. This position will offer the opportunity for technical design, analysis, development, testing, and fielding of capabilities. The successful candidate will have applicable knowledge in areas such as: RF, radar, communications systems, RF component specification and selection, analog and digital signal processing, software-defined radios (SDRs), FPGA firmware and hardware development, microcontrollers and embedded processors, physics modeling and simulation, systems engineering, and test & evaluation. This position requires skills in working with multi-disciplinary teams, design, development, and test activities, as well as proficiency in relevant technologies. Strong interpersonal, communication, and technical skills are required. Applicants are expected to be self-motivated, detail oriented and have ability to effectively communicate. What you will do: • Support development of RF hardware systems through the development lifecycle, from system requirements definition through to delivery, • Collaborate with cross-functional teams to understand system requirements and specifications as they relate to assigned tasking, • Under guidance from senior staff, design and implement hardware designs and support assembly, integration, and testing. Activities may include:, • Identify and select RF systems components (for example: active and passive devices, antennas, connectors, cables, physical enclosures, etc.), • Conduct supporting analyses to inform/justify decisions (e.g. RF link budgets), • Support assembly, initial operation, and check out of system (including definition of test plans), • Near term tasking may be related to RF systems for airborne applications, but you may be tasked on other applications as needed Who you are: • This position requires the ability to obtain a security clearance, for which U.S. citizenship is needed by U.S. Government, • Applicable knowledge of technical concepts related to RF systems and their principles of design, development, requirements verification, test planning, test execution, and data analysis., • Experience in delivery of advanced development hardware., • Capable of effectively working in a team environment, often under tight deadlines., • Experience in providing information for briefings and technical reviews (SRRs, PDRs, CDRs, TIMS), • Active Secret or Top Secret security clearance, • Demonstrated experience in one or more of the following areas: radar systems, electronic warfare, microwave engineering, analog and digital signal processing, embedded software development, physics modeling and simulation Pay Information Full-Time Salary Range: $98,000 - $135,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description00655-25 Data Integration Analyst Do you enjoy learning about new technology and how they can be used to provide cutting-edge services to DoD and Federal Government customers? If so, then look to join the Stellar Innovations and Solutions team. If you love technology and want a career making a difference supporting meaningful DoD and Federal programs, then Stellar Innovations is the company for you! Stellar Innovations & Solutions Inc. is seeking a Data Integration Analyst to join our government project supporting the Air Force onsite, at Wright-Patterson AFB in Dayton, OH. Responsibilities: This role is a unique blend of Data Architect, Data Analyst, Business Analyst, and Data Integration Engineer, focused on bridging the gap between complex technical systems and business needs within the Department of Defense (DoD) IT environment. The ideal candidate is a proactive problem-solver with strong communication skills who can work independently to investigate data paths, document system flows, and translate technical information for diverse audiences. This is a critical support role that reports directly to the Program Manager and acts as a key enabler for multiple technical teams. • Problem-Solving and Data Analysis: Use strong analytical skills to investigate and trace data paths across complex IT systems, ranging from mainframe legacy to modern cloud-based environments. This includes understanding where data originates and how it is used within existing code., • Technical-to-Business Translation: Take complex technical information and translate it into clear business needs and vice versa, effectively communicating with both technical teams and business stakeholders., • Data Integration and Modeling: Document data paths, perform data modeling, and assist with data transformation for reporting and analysis tools., • Independent Work and Initiative: Work independently with minimal supervision, taking initiative to interface with various technical teams and serve as a key support resource., • Technical Skill Set: Possess strong skills, especially scripting, in SQL and PL/SQL. Some shell scripting knowledge would be helpful. Experience with Oracle Database administration is highly desired.Required Experience / Clearance / Certifications:, • Clearance: Secret Clearance, • DoD Approved 8570 Baseline Certification: Category IAT Level II (Security+ CE or higher). PtL6D2OYS1

Job Description Subsidiary: KIRA Information Solutions Job Title: Information System Security Engineer (ISSE) Job Location: Hybrid-Position working with Wright-Patterson Air Force Base, Dayton, OH Labor Category: Exempt Clearance Requirement: Secret Clearance, if required In-person Requirement: As needed, meet in Dayton OH w/ key personnel or Customer Travel Requirement: Minimal, as needed Salary: $120,000- $180,000 Tlingit Haida Tribal Business Corporation (THTBC) is a family of 8(a), HUBZone, SDB, and other companies wholly- owned by the largest tribe in Alaska. Each of its wholly- owned 30+ subsidiaries are uniquely qualified to deliver value to its customers and teaming partners. For over 30 years, THTBC has operated as a trusted US Federal contractor throughout the US and worldwide. As a Native Alaskan, Tribally- Owned business, THTBC has a competitive edge unique in the US Federal Government contracting space, including access to US Government directed sole source contracts. THTBC delivers outstanding service with innovative, low-cost contract solutions to all its public and private sector customers worldwide. THTBC is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Scope of Work: This position is working with the government and may require secret clearance and/or security plus certification. The government program office is Wright Patterson AFB, Dayton, Ohio. The development and support team are geographically dispersed, and teleworking is our daily working protocol, however, on-site support for meetings may be required. The program requires highly qualified, self-motivated, proactive people who work well with others with limited supervision. Essential duties: The Information Systems Security Engineer (ISSE) will be responsible for the day-to-day security operations of all of the ETIMS systems. The ISSE will be responsible for ensuring the full compliance and appropriate operational security posture set to current Federal, CNSS, DoD, USAF, and NIST standard including but not limited to standards included in the programs Performance Work Statement. CyberSecurity for all information systems will be maintained and documented by the ISSE. The ISSE will run vulnerability scans, as required in systems such as Checkmarx and CAST, etc. In addition to implementing and maintaining the aforementioned policies, they shall support the creation and maintenance of Plans of Action and Milestones (POA&M) in response to vulnerabilities identified during scans, risk assessments, audits, and inspections. This responsibility includes physical and environmental protection, access control, incident handling, security training, vulnerability and compliance management, configuration management, and the assistance in the development of security policies and procedures. The ISSE [RD2] [KG3] assures successful implementation and functionality of security requirements and appropriate IT policies and procedures that are consistent with the organization's mission and goals. The ISSE shall ensure that all application deliverables comply with the hosting environment’s Application Security & Development Security Technical Implementation Guide (STIG), which includes the need for source code scanning, the Database STIG, and a Web Penetration Test to mitigate vulnerabilities associated with (Structured Query Language) SQL injections, cross-site scripting, and buffer overflows. The appointed ISSE will work for and in close collaboration with the Government appointed ISSM/E. Our ISSE will perform duties in accordance with DoD Instruction 8510.01 and 8520.02, DoD Directive 8140.01, AFI 33-210, NIST Special Publication 800-37, and AR 25-2. Required qualifications: • Bachelor's degree in engineering, science, mathematics, or a related field., • Five years' experience within the past 10 years, in planning simulation exercise architectures, supervising implementation of communication systems, and integration of distributed exercises., • Five years' experience in information technology management., • Knowledge base with DoD Instruction 8510.01 and 8520.02, DoD Directive 8140.01, AFI 33-210, NIST Special Publication 800-37, and AR 25-2., • Meet DoD 8570.01-M, 8140.01 Baseline Computing Environment (CE) Certification Requirements at Information Assurance Management Level II (IAM II)., • U.S. citizenship. Preferred qualifications: • Bachelor's degree in Computer Science or Information Management., • Possess an expert understanding of NIST, DoD, Air Force (AF) Cybersecurity Risk Management Framework policies, directives, instructions, manuals, and best business practices., • Knowledge of current industry methods for evaluating, implementing, and disseminating IT security assessment, monitoring, detection and remediation tools and procedures utilizing standards-based concepts and capabilities (e.g., ACAS, MECM, ESS,etc.)., • Knowledge of disaster recovery continuity of operations plans. Knowledge of enterprise incident response program, roles, and responsibilities., • Knowledge of network security architecture concepts including topology, protocols, components, and principles (e.g., application of Defense-in-Depth). If you need reasonable accommodations for any part of the employment process, please contact us and let us know the nature of your request. Requests for accommodation will be considered on a case-by-case basis. Program Details: This position is in support of the sustainment and modification of the United States Air Force (USAF) Electronic Technical Information Management System (ETIMS) program. ETIMS is the Air Force System of Record for Technical Order (TO) management and is the Air Force’s Enterprise Defense Business System (DBS) for managing TOs. TOs are military orders containing the authoritative procedures and instructions for operating and maintaining all U.S. Department of the Air Force equipment and systems. ETIMS supports ~178,000 users at ~385 sites worldwide. It also supports ~60,000 eTOs, 54,000 ETIMS eTools, 14,000 paper TOs, and more than 13,000 TO libraries across the Air Force Enterprise. Agencies that rely on ETIMS for Air Force-related TOs and Computer Program Identification Numbers (CPINs) include the Army, Navy, Marines, Coast Guard, Foreign Military Sales (FMS), the National Aeronautics and Space Administration (NASA), The White House, and numerous Military Industrial Complex partners. ETIMS provides access to the official TO cataloging, managing, storing, distributing, and viewing capabilities needed by the operators and maintainers to support all Air Force weapon systems and equipment items. ETIMS is a cloud-based enterprise system hosting Java and Windows applications accessing Oracle database in the AWS environment. The ETIMS migration to the Amazon Web Services (AWS) Air Force Cloud 1 environment and leveraging Agile Principles allows for processes to mature across the user community and enables streamlining and process improvement realized by the rapid delivery of follow-on capabilities. ETIMS has been modernized over the years to provide a fully capable Air Force enterprise TO Management system. The Government Program Office is located at Wright Patterson Air Force Base in Dayton, Ohio. The development and support team are geographically dispersed and teleworking our daily working protocol.

Job Description Description: The DCS Air & Space Technology (AST) Sector is seeking a Modeling and Simulation Software Engineer to support extensive high visibility Modeling, Simulation, and Analysis (MS&A) efforts. Are you interested in working in a high-tech company on cutting edge technology to help solve national security problems? Do you want to be challenged every day supporting world class research and development? If so, DCS may be the place for you! DCS is an employee-owned organization known for creating agile technology solutions across the U.S. Defense, Aerospace, Human Factors, and Security markets. As a member of our team, you will support research and development in Dayton, Ohio, having opportunities to work in a dynamic environment, simulation integration experts, develop, integrate, sustain, and test modeling, simulation, software products for DoD platforms and experiments, and experienced military Subject Matter Experts (SMEs). Essential Job Functions: Design, develop, sustain, and integrate software in a government DevSecOps environment on government-owned systems in support of modeling & simulation and operational/experimental systems. Participate in Agile ceremonies, sprint planning, backlog grooming, and triage; assist government teams with workload prioritization. Perform software integration and installation at government facilities (may require travel). Produce software test plans, execute V&V and lifecycle testing, and generate test reports of the applications developed. Support R&D activities to integrate advanced models, simulations, and hardware into legacy and new platforms (JSE, VATS, F‑16 examples). Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. Bachelor of Science degree or higher in related engineering or science discipline. Must be able to obtain and maintain a DOD Secret clearance. 2–10 years (Journeyman) or 10+ years (Senior) professional software development experience. Using and developing in the Joint Simulation Environment (JSE). Hands-on with DevSecOps practices and toolchains (CI/CD, automated testing, git, Visual Studio, container tooling). Experience with containers and orchestration: Docker, podman, helm charts, Kubernetes/Openshift. Familiarity with Windows and Red Hat Linux environments and VMware administration. Experience integrating modeling & simulation software into larger systems preferred. Strong test planning, V&V and documentation skills. Demonstrated expert level proficiency in C++ and object-oriented analysis and design. Excellent written and oral communications skills. Desired Skills: Experience in AFSIM, NGTS, or other simulations. Experience using EAAGLEs Framework. Experience developing in OpenGL or OSG.

Job DescriptionDescription:Position Overview This position provides engineering, systems integration, airworthiness, and lifecycle support to U.S. Air Force acquisition programs across the full Systems Engineering V-model. The role supports development, modernization, sustainment, and certification activities for complex aircraft systems, subsystems, avionics, and mission equipment. The engineer applies DoD, USAF, and industry-standard engineering principles to ensure Operational Safety, Suitability, and Effectiveness (OSS&E), airworthiness compliance, and mission-ready capability for current and future weapon systems. This position is aligned with PWS Sections 3.5.1 and 3.5.3 and provides both general systems engineering support and specialized avionics engineering support as required. Key ResponsibilitiesSystems Engineering and Airworthiness Support • Apply DoD, Air Force, and engineering principles to improve capability, performance, and sustainability of fielded and emerging aircraft systems., • Support USAF airworthiness processes using MIL-HDBK-516C criteria; monitor certification status; support flight authorization packages; interpret and implement AFPD 62-6, associated AFIs, and Airworthiness Bulletins., • Support System Integrity Programs including MECSIP, critical safety item (CSI) management, and related airworthiness risk analyses., • Translate operational user requirements into system-level requirements to support design, development, testing, evaluation, sustainment, and fielding of weapon systems., • Conduct mission, technical, and trade-off analyses for upgrades, modifications, and new system concepts., • Provide rapid response engineering analysis to identify root causes, impacts, and corrective actions for system deficiencies and supportability challenges., • Support system safety engineering activities including mishap risk assessments, review of contractor safety proposals, and resolution of high-priority safety issues., • Conduct material solution analyses, support design reviews (SRR, PDR, CDR, TRR, FCA, PCA, PMRs), and develop associated documentation., • Contribute to OSS&E compliance by supporting baseline updates, metric reporting, risk assessments, and LCSE process implementation across system lifecycles., • Requirements documents: ICD, ORD/CDD/CPD, CONOPS, SRD, System Specifications, • Acquisition products: RFPs, SEPs, TEMPs, PESHE, PPP, TTPs, TA/CP, IAS, SCGs, • Engineering and technical documents: studies, analyses, evaluations, ATPs, design artifacts, • Compliance assessments: CCA, CBRN Survivability, Spectrum Supportability, Data Rights Strategy, • Analyze equipment and software deficiencies, recommend corrective actions, and assist in integration and test of solutions., • Support evaluation of ACSNs, ECPs, CCPs, FAA bulletins, DMSMS issues, and associated contractor proposals., • Support development and assessment of IMP, IMS, and Systems Engineering Detail Schedules., • Assist in configuration, data, and risk management planning and execution., • Participate in interface control meetings, audits, program management reviews, and technical working groups.Avionics Engineering ResponsibilitiesAvionics Systems Development, Integration, and Certification, • Provide avionics engineering expertise across requirements definition, subsystem development, modeling and simulation, integration, test and evaluation, sustainment, and airworthiness certification., • Support Aircraft Information Management Systems (AIMS), spectrum management requirements, testing, and certification., • Apply CNS/ATM policies and regulations; develop compliance matrices and support verification activities., • Review and develop avionics-related program documentation including system/subsystem specifications.Avionics Analysis and Technical Evaluation, • Conduct analyses of avionics interfaces, laser systems, multiplex bus communications, BIT performance, and subsystem threat assessments., • Assess state-of-the-art technologies, system feasibility, and improvement opportunities., • Review system-specific test plans; participate in component, subsystem, and full system testing.Controls, Buses, and Displays (Additional Duties for Assigned Personnel), • Demonstrate knowledge of airborne controls and displays, cockpit displays, operator stations, data bus architectures (MIL-STD-1553B, ARINC-429), and data recording systems., • Review technical documentation for specification and airworthiness compliance; develop findings and recommended changes., • Support technical interchange meetings regarding hardware/software updates to controls, displays, data buses, and associated avionics systems., • Support requirements development for future upgrades and assess airworthiness documentation in accordance with AFPD 62-6.Requirements:QualificationsRequired, • Bachelor’s degree in engineering or a related technical discipline with ABET Certification., • Experience supporting DoD or USAF acquisition, engineering, or sustainment programs., • Knowledge of systems engineering practices, airworthiness criteria, and weapon system lifecycle processes., • Familiarity with MIL-HDBK-516C, OSS&E, LCSE, and relevant Air Force Instructions., • Ability to analyze complex technical data, conduct trade studies, and generate engineering recommendations., • Experience supporting technical reviews, deficiency analyses, and engineering documentation development.Desired, • Experience in avionics engineering, integration, or certification activities., • Understanding of AIMS, CNS/ATM, data bus architectures, controls and displays, and avionics cyber and spectrum requirements., • Experience evaluating ECPs, ACSNs, FAA bulletins, and DMSMS risk., • Experience supporting USAF configuration management, risk management, and system safety processes., • Analytical problem solving and engineering judgment, • Requirements development and traceability, • Airworthiness and OSS&E compliance, • Technical writing and documentation, • Stakeholder coordination and technical communication, • Ability to work independently in a fast-paced acquisition environment

Job Description nou Systems, Inc. (nSI) is now officially a 100% ESOP company! We value teamwork and collaboration, and this transition allows us to take that commitment to a new level. nSI empowers our customers by supplying products, services, and expertise with powerful, data driven insights that transform defense systems and improve capabilities. We are pleased to announce the opening for a Model Based Systems Engineer (MBSE) / Digital Engineer who will join our Technical Solutions Division in Beavercreek, Ohio and become part of our rapidly growing technology company operating in missile defense, cybersecurity, test range modernization, biotechnology, and space control marketspaces. You will be part of a team that constructs, manages, and conducts discrete mission engineering and analysis to evaluate the efficacy of legacy architectures and new technologies Responsibilities: • Develop, analyze, and maintain system models using MBSE methodologies, tools, and languages (e.g., Cameo, MagicDraw, Systems Modeling Language (SysML), Unified Modeling Language (UML))., • Design and integrate system architectures, interfaces, and workflows to support Department of Defense (DoD) acquisition and sustainment processes., • Conduct requirements analysis, traceability, and validation across system lifecycles, ensuring alignment with stakeholder and mission needs., • Support the development of digital engineering capabilities, including digital thread/twin integration and migration., • Collaborate with cross-functional teams (software, hardware, and cyber engineers) to ensure seamless integration and interoperability., • Provide technical guidance, mentorship, and MBSE expertise to program managers, stakeholders, and junior engineers., • Prepare and deliver technical documentation, briefings, and data packages to inform leadership and government decision-making., • You must have a Bachelor’s Degree in Systems Engineering, Aerospace, Electrical, Computer Engineering, Computer Science, or related technical field., • You will need 4+ years of experience in systems engineering, with direct experience in MBSE., • Proficiency with MBSE methodologies and tools (e.g., Cameo Systems Modeler, MagicDraw, IBM Rhapsody, Enterprise Architect)., • Strong knowledge of SysML/UML for modeling architectures and system behaviors., • Experience with requirements management tools (e.g., JIRA) and traceability processes., • Ability to interface with customers in technical and programmatic contexts, translating needs into actionable tasks., • Strong written and verbal communication skills, with the ability to produce and present technical documentation., • You must possess or can obtain an active Top Secret/SCI clearance. Preferred Qualifications: • Master’s Degree: Systems Engineering, Engineering Management, or related discipline., • 10+ years of experience in MBSE or systems engineering roles, preferably within DoD, aerospace, or related industries., • International Council on Systems Engineering (INCOSE) certification or equivalent systems engineering certification., • Certified SysML Model Builder or MBSE-specific training., • Experience with DoD Architecture Framework (DoDAF), Unified Architecture Framework (UAF), or other architecture frameworks., • Familiarity with digital thread/digital twin applications, automation, and integration of MBSE across organizations., • Experience supporting DoD open architectures. Since its founding in 2012, nou Systems has built a reputation for excellence in innovative engineering, prototype development, and technical and professional services in multiple markets, including missile defense, cybersecurity, test range modernization, and space control. Our diverse and highly skilled team delivers state-of-the-art products from concepts and prototypes to fully developed and integrated solutions. We offer significant advancement and personal career development opportunities within our dynamic high-tech company. Our culture is firmly established in treating our employees like family. Benefits of working at nSI nou Systems, Inc. offers a comprehensive, total rewards package that includes competitive compensation and diverse benefits that reflect our company culture of service, excellence, and a supportive work environment. Benefits may vary based on status but the majority of our positions include the following: • Competitive Wages*, • Medical, Rx, Dental & Vision Insurance, • Medical plan with Health Savings Account eligibility, • Company-funded Life, Short-Term & Long-Term Disability Insurance, • Personal Time Off, Vacation, and Paid Holidays, • 401(k) Retirement Plan, • Employee Stock Ownership Plan (ESOP), • Flexible Spending Accounts, • Norton LifeLock, • Tuition Reimbursement, • Personal Development, Technical Learning Opportunities, & Lunch-n-Learns nSI is an Equal Opportunity Employer Employment opportunities at nSI are based upon a candidate’s qualifications and capabilities to perform the essential functions of a particular job and are free from discrimination based on race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, protected veteran status, genetic information, or any other characteristic protected by law. For our complete EEO/AA and Pay Transparency statement, please visit . U.S. citizenship is required for most positions.

Job Description Phalanx Griffon (PG) is the Air Force’s flagship airborne node connecting warfighters to decision‑quality data across the DAF BATTLE NETWORK. As Journeyman Systems Engineer, you will own the digital thread that turns brilliant ideas into flight‑ready capability for Major Release 2 (FY 25 – 27)—driving requirements, architecture, and model‑based systems engineering across hardware (Nomad), software (Smith), and operations (Watch). Essential Job Functions: Architect & Model the System‑of‑Systems * Lead creation and upkeep of the government‑owned SysML / CAMEO model, DoDAF views, and interface‑control documents (ICDs) that capture Nomad‑Smith‑Watch interactions with the Digital Infrastructure (DI), SATCOM links, and cross‑domain solutions. Required to input requirements into CAMEO. * Ensure every requirement traces to a verification method and mission thread, supporting CJADC2 and Operational Imperative #2 objectives. Requirements & Baseline Management * Elicit, decompose, and manage stakeholder needs in DOORS‑NG (or equivalent); chair requirements reviews, delta boards, and configuration‑control boards. * Maintain the Technical Baseline and drive change packages through digital workflows, preserving model / document synchronization. Integration Leadership * Partner with IPT leads to translate digital designs into Integration SIL builds; resolve cross‑domain, crypto, power, and data‑bus interface issues quickly. * Feed lessons learned back into the model, ensuring the next sprint starts with an accurate baseline. Verification & Validation Alignment * Collaborate with Test & Flight‑Test teams to develop the Verification Cross‑Reference Matrix (VCRM) and ensure early “shift‑left” validation of safety, cyber, and performance requirements. * Provide pre‑flight technical concurrence for Interim Authorizations To Test (IATTs) and air‑worthiness packages. Risk, Metrics & Reviews * Maintain the technical risk register, conduct root‑cause analyses, and brief burn‑down plans to senior DAF leadership. * Feed schedule, maturity, and performance metrics into the Integrated Master Schedule (IMS) and digital dashboards. Mentorship & Culture * Coach mid‑level engineers on MBSE best practices, Agile/SAFe workflows, and DevSecOps culture in a classified environment. * Foster a collaborative, “model‑first” mindset across Government and industry teammates. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. A High School Diploma plus 15 years of directly related experience with proper certifications as described in the Functionally Aligned Job Descriptions, 5 of which must be in the DoD or a BA/BS plus 10 years of experience in the respective technical/professional discipline being performed, 3 of which must be in the DoD. Active TS/SCI clearance. MBSE experience. Proficiency with SysML modeling tools (CAMEO/MagicDraw, Rhapsody, or equivalent) and requirements databases (DOORS, Jama). Demonstrated experience leading multi‑disciplinary design reviews (SRR, PDR, CDR) and managing technical baselines in a digital‑engineering environment. Solid grasp of MIL‑STD avionics power, data links (Link‑16/22, TTNT, OMS/UCI), SATCOM, Type‑1 crypto, and RMF / IA compliance. Desired Skills: INCOSE CSEP / ESEP or DAU ENG/SAE Level III certification. Prior work on ABMS, CJADC2, or other open‑architecture airborne networking efforts. Familiarity with DevSecOps pipelines (Platform One / Iron Bank) and automated model validation (ModelCenter, Cameo Simulation Toolkit). Experience briefing SES / GO audiences and shaping acquisition strategy documents (AS, SEP, SEMP, TEMP).

Job DescriptionStart Date: Immediate EXPANSIA is a service-disabled veteran-owned company that empowers organizations to be mission ready now with data, people, and ecosystems. As experts in continuous-delivery methods that drive digital adoption, we are dedicated to innovation, efficiency, and technology that benefit the warfighter. EXPANSIA specializes in integration, automation, and sustainment modernization through technology-enabled delivery models, digital engineering, and cloud-ready solutions. OVERVIEW Full-time/Permanent Employee Location: Dayton, OH We are seeking a skilled and experienced Cloud Engineer III to join our team and support the development, implementation, and maintenance of cloud-based solutions for government clients. As a Cloud Engineer III, you will assess cloud infrastructure and cloud service needs for an Integrated Digital Environment (IDE), assist in assessing the integration of existing custom IDE’s implemented on Amazon Web Services and Azure throughout the U.S. military’s mission systems environments, and assist with the implementation of the IDE, which will the deployment and configuration of COTS and GOTS applications, network connectivity and identity federation across military systems. You will automate build pipelines, migrations, security, and compliance while managing cloud networking, utilizing Ansible and similar tools for automation. Responsibilities include implementing and maintaining cloud infrastructure, performing administrative tasks, and providing deployment support. You will enhance security by applying patches, conducting security reviews, and managing access controls while implementing enterprise monitoring solutions using industry-standard tools. Additionally, you will document processes, identify automation opportunities, and develop scalable monitoring solutions, dashboards, and alerts to align with business and IT objectives. The proposed salary range for this position is $109,837-$138,000. There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. Our employees value the flexibility EXPANSIA allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our unique mix of benefits options is designed to support and protect employees and their families. Employment benefits include health and wellness programs, income protection, paid leave and retirement and savings. RESPONSIBILITIES • Design, implement, and manage cloud infrastructure in Amazon Web Services, • Automate cloud provisioning, configuration management, and deployments using tools like Terraform, Ansible, or CloudFormation., • Work with application SME’s to optimize cloud-native services for scalability and performance., • Collaborate with security teams to implement security best practices, including encryption, access controls, and compliance., • Monitor cloud resources, ensuring optimal performance and cost efficiency., • Troubleshoot and resolve cloud-related issues in production environments., • Participate in designing and implementing disaster recovery and backup solutions., • Stay up to date with the latest cloud technologies, trends, and best practices. KEY QUALIFICATIONS, • Clearance: Active TS/SCI, • Education and Years of Experience: Bachelor’s degree with 5–7 years of experience, or a Master’s degree with 3–5 years of experience in cloud engineering, cloud infrastructure, or a similar role., • Hands-on experience with Amazon Web Services and Microsoft Azure, • Proficiency in Infrastructure-as-Code (IaC) tools such as Terraform, Ansible, or AWS CloudFormation., • Experience with containerization technologies like Docker and Kubernetes., • Familiarity with CI/CD tools like Jenkins, GitLab, or AWS CodePipeline and AWS CodeDeploy, • Strong understanding of cloud networking, storage, and compute services., • Experience with cloud security practices and tools, such as IAM, VPC, encryption, and firewalls., • Proficient in scripting languages such as Python, Shell, or PowerShell., • Familiarity with monitoring and logging tools like Prometheus, Grafana, or CloudWatch., • Strong problem-solving and troubleshooting skills., • Excellent communication and collaboration skills., • Familiarity with Agile Scrum or Kanban development practices in Jira, Agility or similar tool., • Security+ CE, CySA+, CCNA Security, CND, GICSP, GSEC or SSCP PREFERRED ADDITIONAL QUALIFICATIONS, • Experience with AWS GovCloud, Cloud One and similar government cloud solutions, • Familiarity with applying DISA, FISMA, NIST, CIS and ISO standards to cloud environments, • Cloud certifications (AWS Certified DevOps Engineer, AWS Certified Solutions Architect, etc.)., • Knowledge of DevOps methodologies and best practices., • Experience deploying and scaling third-party applications/services in the cloud, • Experience with hybrid cloud or multi-cloud environments (system of systems)., • Knowledge of the U.S. Government’s information classification levels and data movement across classification boundaries EXPANSIA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job Description Phalanx Griffon (PG) is the Air Force’s next‑gen airborne node connecting warfighters to decision‑quality data across the DAF BATTLE NETWORK. As Senior Test Engineer, you will architect and execute the end‑to‑end verification, validation, and flight‑test strategy for Major Release 2 (FY 25‑27)—from bench‑level checkout in the Integration SIL to operational acceptance on multiple aircraft. Essential Job Functions: * Strategy & Planning * Build the Program‑level Test & Evaluation Master Plan (TEMP) that links Nomad hardware, Smith software, and Watch ops‑support elements to CJADC2 mission threads and MR 2 exit criteria. * Define DT/OT entrance & exit gates, traceability matrices, and milestone metrics within the Integrated Master Schedule. * System Integration Laboratory (SIL) Leadership * Design lab architectures replicating platform power, data, and environmental interfaces; oversee daily ops, configuration control, and security accreditation. * Implement automated regression suites (Python/Robot Framework, Jenkins, Ansible, IXIA/Spirent) covering functional, performance, and cyber‑resilience tests. * Developmental & Operational Test Execution * Lead ground and flight‑test events: draft test cards, hazard analyses, Interim Authorizations To Test (IATT), and Safety‑of‑Flight packages. * Serve as lead flight‑test engineer or ground‑test conductor, capturing telemetry, logs, and spectrum traces; troubleshoot anomalies in real time. * Data Analysis & Reporting * Perform statistical analysis of throughput, latency, crypto handshake times, SWaP‑C impacts, and mission‑effect metrics. * Produce concise after‑action reports, deficiency reports (DRs), and recommendations for corrective action to IPTs and senior USAF stakeholders. * Continuous Integration / DevSecOps * Integrate test automation hooks into the PG DevSecOps pipeline; ensure every 90‑day Smith build passes gated SIL tests before promotion. * Champion a “shift‑left” testing mindset—embedding verification earlier in design reviews and digital engineering artifacts. * Mentorship & Collaboration * Guide junior test engineers, platform SPO test reps, and Government civilians on best practices for agile T&E. * Interface with NSA, DISA, and flight‑safety authorities to align test artifacts with certification needs (ATO, crypto, airworthiness). Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. A High School Diploma plus 20 years of experience with proper certifications, a Bachelors degree in an applicable discipline and 15+ years of DoD system‑of‑systems test engineering, including lab‑to‑flight progression, or a Masters degree plus 12 years of experience. Active TS/SCI clearance. Proven leadership of large‑scale DT/OT efforts for avionics, communications, or C2 systems. Hands‑on with test automation frameworks, instrumentation, and data‑analysis tools (MATLAB, Pandas, JMP, or similar). Familiarity with MIL‑STD‑810/461, RCC 324/125‑15, or comparable environmental and EMI/EMC standards. Desired Skills: Previous work on ABMS, CJADC2, OMS/UCI, or tactical data‑link programs. Experience with Type‑1 crypto, cross‑domain solutions, and RMF/eMASS artifacts. Flight‑test credentials (USAF TPS grad, FAA DER, or equivalent). Agile/Scrum or SAFe certification; knowledge of Model‑Based Test (MBSE‑driven test cases).

Job Description Solutions Through Innovative Technologies, Inc. (STI-TEC) specializes in the delivery of professional business and information management services. STI-TEC offers government and commercial clients a comprehensive portfolio of services that identify, manage, distribute and improve business processes related to entities’ most valued resource, information. As a fast-growing solutions provider, established in 2000, total customer satisfaction has remained the cornerstone of our business. Our business model focuses on integrity, loyalty, and trust. Position Overview The Advanced Framework for Simulation, Integration, and Modeling (AFSIM) is an innovative, open-source military simulation framework used extensively by the U.S. Department of Defense (DoD) and related communities. Managed by the U.S. Air Force Research Laboratory (AFRL), AFSIM supports scenario creation, analytical work, and virtual wargaming, benefiting from a collaborative user community across the military, government, industry, academia, and international partners. To enhance AFSIM's growth, the Department of the Air Force (DAF) is establishing a Model Management Office (MMO). In this cutting-edge new MMO the Cybersecurity Engineer will enhance and maintain the cybersecurity posture of MMO products and services, to include AFSIM. The contractor shall advise or assist in developing a comprehensive assurance strategy to continuously identify and mitigate potential security vulnerabilities or weaknesses and promote a secure software development lifecycle Essential Job Function Cybersecurity Awareness • Implement continuous monitoring to maintain DoD enterprise software certifications or Certificates to Field (CtFs). These certifications streamline the approval to use MMO products and services on enterprise DoD information networks to include NIPR, DREN, SIPR, SDREN, JWICS, and SAP networks, • Monitor codebase changes as part of automated quality gates, • Perform security audits to ensure the sufficiency of both manual and automated practices and procedures, • Monitor third-party libraries for emerging vulnerabilities and weaknesses, particularly those vulnerabilities as identified in the public Common Vulnerabilities and Exposures (CVE) list, • Advise or assist in the tracking and remediation of potential vulnerabilities and weaknesses associated with MMO products or services, • Advise or assist in the design, implementation, and maintenance of a cyber incident management and response plan, • Advise or assist in the preparation and generation of required cybersecurity assessment and/or authorization documentation related to MMO products and services, • Bachelor's Degree in Cybersecurity, Information Technology, Computer Science, or a related discipline, • Information Assurance System Architect and Engineer (IASAE) Level-II certification in accordance with AFMAN-17-1303 and DoD 8570.01-M, • Top Secret SCI clearance and SAP eligibility Desired Qualifications, • Master’s degree in a related field Applicants selected may be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. STI-TEC is an equal opportunity employer and values diversity. Employment is decided on the basis of qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, gender identity and sexual orientation. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfer, leaves of absence, compensation and training. If you need assistance or an accommodation due to a disability, you may contact us at or you may call us at 1+918.583.9900. *This job posting is to identify potential candidates for positions in order to respond to a request for proposal. This job posting, including but not limited to, qualifications, duties, compensation and benefits, is subject to change based on the terms and conditions of the awarded contract and is contingent on STI-TEC being awarded the contract.

Job DescriptionDescription:Diaconia is looking for a talented Systems Integration Engineer, Senior to join our Amazing team!If you're looking to join a company that truly appreciates you and your talents, look no further! At Diaconia, we are committed to serving and caring for our colleagues, our clients and our community. Our team is made up of talented individuals who appreciate having the opportunity to contribute their knowledge and experience to further the growth and development of our industry. Our ideal candidates embrace diverse thinking, enjoy partnering with others and are seeking to make a difference! We are currently searching for a new, full-time member for our team for the position of:Systems Integration Engineer, Senior MUST BE U.S. CITIZEN...NO EXCEPTIONS Responsibilities: • Perform systems engineering to include expertise in systems design and integration; manufacturing, quality and industrial engineering; airworthiness; and configuration, and data management., • Assist in developing, deploying, and maintaining processes to assure weapon systems are fully integrated, manufactured, sustained, configuration managed and operationally safe, suitable and effective throughout their life cycle., • Understand and execute AFPD 62-6, USAF Airworthiness, through standardized processes, and issuance of flight authorizations., • Apply OSS&E and airworthiness processes, as well as assist in providing risk assessments, safety analysis and recommendations, and addressing high priority safety issues., • Have knowledge of systems engineering in support of system definition, development, integration, verification methods, sustainment, risk modeling/simulation, testing and evaluation, human system integration (HSI), crew stations engineering, OSS&E efforts, interoperability requirements, and airworthiness certification across a wide range of hardware and software systems, including ground-based systems., • Review and assist in performing assessments on program specific databases, analyzing BIT failure reports, and comparing failure reports against the BIT interpreter analyzer for accuracy of BIT indications; provide system integration guidance to aircraft program offices for the program system installation and system maintenance; review and analyze technical proposals or modifications for design feasibility and system capability; assist in conducting performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies; and conducting systems analyses to including but not limited to system design/design feasibility and state-of-the-art assessments., • Provide system integration guidance to the Government for the program system installation and system maintenance., • Provide technical expertise and proper application of systems engineering processes to support technology and systems development., • Advanced Degree (Master of Arts (MA) / Master of Science (MS)) and twelve (12) years of experience in the respective technical / professional discipline being performed, five (5) years of which must be in the DoD, • OR, BA/BS degree, and fifteen (15) years of experience in the respective technical/professional discipline being performed, five (5) of which must be in the DoD, • Apply an understanding of DoD, AF, and common engineering/scientific principles, processes, and procedures to improve performance and sustainability of existing and future AF and joint service weapon systems., • Independently demonstrate proficiency in the use of Microsoft Office Applications (Outlook, Word, Excel, PowerPoint, SharePoint, and Skype/Lync), Adobe Acrobat, and applications for access to the world wide web including Microsoft Internet Explorer., • Ability to obtain and maintain a security clearance at the required level. U.S. Citizenship.

Job DescriptionSalary: $120,300- $141,500 Tangram Flex is seeking a Senior Software Engineer with a minimum of 8 years of experience with technical leadership in software product development and technology programs. Hybrid and On-Site opportunity. What We Do: Our team and products provide solutions to enable innovators to design, develop, verify, and advance critical systems, while accelerating innovation that advances our nation's security. By accelerating delivery of critical systems, Tangram is transforming the way our nation solves complex software challenges. POSITION DESCRIPTION/ Senior Level Software Engineer would provide technical leadership in software product design and development and technical customer programs targeting software and hardware integration and verification for both Defense and Commercial customers/applications. JOB RESPONSIBILITIES/ Primary Responsibilities: • Design, develop, write code and test software with approved architecture and engineering processes and best practices in relevant languages (ex. C/C++/Java/Python/Rust)., • Primary representative and technical thought partner with clients articulating project requirements, outlining expectations, and collaborating with the team to achieve commitments., • Review and influence ongoing design and development to support end-to-end life cycle including internal and external resources., • Respond to and resolve emergent problems in all aspects of production., • Innovate and mentor a team of engineers, lead teams on top of tech trends, experimenting with and learning new technologies, participating in internal and external technology communities, mentoring other members of the engineering community., • Facilitate software development utilizing the Agile SDLC methodology., • Perform technical support and product use guidance for customer engineers., • Support system testing and system performance analysis., • Analyze, develop, and recommend design approaches to meet requirements for new or improved products and/or processes., • Analyzing and enhancing efficiency, stability and scalability of system resources., • Collaborate with software engineers, systems engineers, and other stakeholders on system characteristics, design, and requirements., • Maintain a high level of understanding our Tangram Flex products and their application within a customer environment., • Contribute to building Tangrams software products, customer systems, and demonstration systems., • Communicate the technical concepts to both business and technical users., • Listen, understand, and convey customer requirements to engineering teammates, Product management, Sales / Growth team, and others., • Resolve customer issues or difficulties in a manner that is consistent with the company mission, values, and financial objectives of the company., • Provide status of ongoing and future projects., • Present technical findings and support customer demonstrations., • Participate in sprint reviews, planning, and integration events., • Participate with in person client meetings, DESIRED SKILLS & RESPONSIBILITIES / Required Skills: • BS in Computer Engineering, Computer Science or Electrical Engineering, or equivalent experience., • 8-10+ years experience in software product development., • Possess a current/or recent U.S. Government Security Clearance or the ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance., • Experience in a hands-on, technical leadership role (e.g. Principal Investigator, Technical Director, Chief Engineer, Security Architect) on related R&D or product development projects., • Experience in software product development using secure software development methods., • Current expert level C/C++ programming skills.., • Ability to work in a fast-paced, entrepreneurial environment as part of a small team and execute complex development tasks with limited supervision., • Professional writing and verbal communications skills adequate to prepare software documentation, participate in technical proposal development, and work with external customers., • Ability to Travel to Client sites and Conferences, • MS/PhD in Computer Engineering, Computer Science or Electrical Engineering., • Strong technical relationships with DoD related laboratories (e.g. Air Force Research Laboratory, Office of Naval Research, Army CERDEC)., • Current in Python and JAVA., • Ability to travel by air, car, or other transportation methods., • Prolonged periods of sitting at a desk and working on a computer (up to 8 hours/day)., • Ability to lift and carry lightweight items (e.g., laptops, demo equipment, marketing materials) up to 25 lbs., • Frequent use of hands and fingers for typing, using a mouse, writing, and handling equipment., • Visual acuity to read detailed technical documents, view computer screens, and operate software systems., • Auditory ability to participate in meetings, customer demos, and conference calls, including in potentially noisy environments (e.g., trade shows or military facilities)., • Mobility to move between office spaces, customer sites, conference venues, and manufacturing or lab environments., • Flexibility to adapt to varying work environments (e.g., corporate offices, government buildings, industrial or lab spaces). We are committed to staying rooted in our core value of Team First. For that reason, we've designed a highly competitive benefits program and supportive work environment to engage employees and their families. • Hybrid work options, • Flexible Working Hours and generous Paid Time Off, • Employer Paid Medical, Dental, Vision and Short and Long Term Disability Insurance, • Access to group rating plans for Life Insurance, • Employer contribution to Health Savings Account, • Competitive 401K employer match, • A work environment and culture that fosters transparency, collaboration and well-being. Tangram Flex is an Equal Opportunity Employer, and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in its application procedures and in accordance with federal law. All qualified candidates will receive consideration for employment based on business needs, job requirements, and individual qualifications. EEO/AA Vet/Disabled Employer/ and E-Verify

Job Description We are a multidisciplinary R&D team focused on developing autonomous navigation solutions for GPS denied environments, merging state-of-the-art techniques from sensor fusion, computer vision, and PNT (Position, Navigation, and Timing) technologies. Our algorithms support real-time state estimation for autonomous platforms using data from cameras, IMUs, LiDAR, radar, and non-traditional sensors. We're looking for an experienced engineer to take a leading role in designing and implementing navigation algorithms, working alongside experts in autonomy, perception, and embedded systems to deliver robust, mission-critical software for real-world autonomous systems. Essential Functions: • Design, implement, and deploy robust sensor fusion and state estimation algorithms for autonomous navigation in degraded GPS environments., • Lead development of perception and localization systems that integrate data from vision, IMU, GNSS, and alternative navigation sensors., • Develop and optimize algorithms for real-time performance on embedded and edge compute platforms (e.g., Jetson, FPGA, ARM SoCs)., • Perform simulation-based validation and hardware-in-the-loop testing using environments such as ROS, Gazebo, or CARLA., • Drive research into emerging techniques, including deep learning for perception and SLAM, and assess applicability to navigation problems., • Mentor junior engineers and contribute to project planning, code reviews, and system integration efforts., • Interface with internal and external collaborators to support test campaigns, data collection, and field evaluations., • Perform other duties as required., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Proficiency with sensor fusion algorithms (e.g., EKF, UKF, factor graphs, SLAM) and navigation concepts (inertial navigation, visual odometry, GPS-denied PNT)., • Advanced programming skills in C++, Python, and/or MATLAB, with familiarity in modern development workflows (Git, CI/CD)., • Strong problem-solving skills and ability to analyze large datasets from multi-sensor systems., • Familiarity with open-source navigation and SLAM frameworks (e.g., ORB-SLAM, VINS-Mono, GTSAM, Cartographer)., • Bachelor's Degree in computer Engineering, Robotics, Electrical Engineering, Aerospace Engineering, or a closely related field., • 5+ years of relevant industry or research experience in robotics, autonomous systems, or navigation algorithm development., • Experience with computer vision and ML frameworks such as OpenCV, PyTorch, or TensorFlow., • Experience with embedded systems, real-time computing, and deploying algorithms to fielded platforms., • Experience leading or significantly contributing to R&D projects involving autonomy or robotics., • Experience with robotics middleware (ROS/ROS2) and simulation environments (Gazebo, CARLA). The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment. For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance: • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionSalary: $90,400 - $128,700 Tangram Flex is seeking a Software Engineer with 3+ years of experience to join our dynamic team. As a key technical contributor, you will be responsible for providing innovative, reliable solutions to a range of technical software integration challenges, ensuring complete customer satisfaction. This role demands a strong technical skillset coupled with the ability to establish and nurture relationships with stakeholders throughout the entire program lifecycle. What We Do: Our team and products provide solutions to enable innovators to design, develop, verify, and advance critical systems, while accelerating innovation that advances our nation's security. By accelerating the delivery of critical systems, Tangram is transforming the way our nation solves complex software challenges. POSITION DESCRIPTION/ Software Engineers are the primary technical resource for customer engagements, responsible for designing, developing, and maintaining software solutions and technology in a collaborative environment for the programs they support or oversee. JOB RESPONSIBILITIES/ Primary Responsibilities: • Design, develop, and test software in relevant languages (ex. C++/C/Java/Python/Rust)., • Provide design and development support to internal and external resources., • Perform technical support and product use guidance for customer engineers., • Plan and execute software design and analysis including documentation, testing, and general programming., • Support system testing and system performance analysis., • Analyze, develop, and recommend design approaches to meet requirements for new or improved products and/or processes., • Analyzing and enhancing efficiency, stability and scalability of system resources., • Collaborate with software engineers, systems engineers, and other stakeholders on system characteristics, design, and requirements., • Contribute to building Tangrams software products, customer systems, and demonstration systems., • Articulate technical concepts to both business and technical users., • Listen, understand, and convey customer requirements to engineering teammates, product management, sales / business development, and others., • Resolve customer issues or difficulties in a manner that is consistent with the company mission, values, and financial objectives of the company., • Maintain professional business relationships., • Provide status of ongoing and future projects., • Present technical findings and support customer demonstrations. Required Skills: • Bachelor's Degree in Computer Engineering, Electrical Engineering, Systems Engineering, or equivalent technical field, • Possess a current/or recent U.S. Government Security Clearance or the ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance., • Deep experience with C, C++, Java, Python, or Object Oriented Design., • Minimum of 3+ years of experience in engineering or software development working collaboratively as part of a high functioning team., • Periodic travel for business events, meetings, etc., • Understanding and/or interest in Open Architectures and relevant DoD standards such as OMS or FACE., • Familiarity or interest with system design, and embedded systems., • Hands-on experience with building systems and system components from sub-system components., • Familiarity with Software Test and Assurance Approaches (i.e., Unit Testing, Static Analysis, Fuzz Testing, Symbolic Execution)., • Knowledge and/or interest in Docker/Containerization, Java, GoLang, Rust, YAML/Bash, Linux etc., • A solid understanding of network communications technology., • Familiarity with software simulation tools and test frameworks such as AFSIM. We are committed to staying rooted in our core value of Team First. For that reason, we've designed a highly competitive benefits program and supportive work environment to engage employees and their families. Hybrid/On-site (Dayton, Ohio) work options Flexible Working Hours and generous Paid Time Off Employer Paid Medical, Dental, Vision and Short and Long Term Disability Insurance Access to group rating plans for Life and Disability and Pet Insurance Employer contribution to HSA 401K employer match A work environment and culture that fosters transparency, collaboration, and well-being with engaging employee events for social interaction and knowledge sharing. Tangram Flex is an Equal Opportunity Employer, and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in its application procedures and in accordance with federal law. All qualified candidates will receive consideration for employment based on business needs, job requirements, and individual qualifications. EEO/AA Vet/Disabled Employer/ and E-Verify

Job Description Mission Speechify is the easiest way to listen to the world's information. Articles on the web, documents in the cloud, books on your phone. We absorb it all and let you listen to it at your desk, on the go, at your own speed, and with tools that make learning easier, deeper, and faster. What streaming services have done for audio entertainment, we're doing for audio information. And whatever we're doing seems to be working. We're #1 in our category, and experiencing exponential growth. Overview We're looking for a Senior Software Engineer to join our Core Experiences Team. This team builds and maintains the foundational services and SDKs that power Speechify's product experience across platforms. It's a critical role for someone who enjoys working at the intersection of product and infrastructure, thinks strategically, and is passionate about designing clear, reliable APIs and simple systems that directly enhance the user experience. What You'll Do • Collaborate with Speechify's Product Teams to scope projects, find ways to reduce scope to get faster feedback from customers, navigate the integration/UX tradeoffs relevant to different product teams, and deliver solutions via our cross-platform SDK, • Optimize existing functionality to ship things like faster loading and more intelligent parsing by designing more efficient abstractions and improving our algorithms, • Systems thinking. You know that optimizing a system requires end-to-end design, and you believe simplicity is valuable., • Speed. You work quickly to generate ideas and options and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs, • Preferred Tech Stack:, • Kotlin Multiplatform (Java experience is OK but role is Kotlin Multiplatform), • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description A mission-focused Lead Software Engineer develops and deploys software essential for a specific, real-world objective or "mission" in partnership with our customers. This approach differs from standard software engineering by adding a strong emphasis on the end-user's operational needs and the success of the overall mission, rather than just technical performance. Ensuring alignment to the mission and customer through an agile response to dynamic priorities can significantly improve the impact of STR software. SDD executes the entire lifecycle of the solution, from conceptualization and architecture refinement through implementation and deployment, while leveraging novel technologies to deliver first-of-a-kind systems. Current efforts include programs for airborne and space sensors and advanced operations enabled by multi-function, multi-modal capabilities. In this role you will be exposed to key operations, users, and technology that have strategic impact on AF operations. The Role As a Lead Software Engineer in STR's Systems Development Division (SDD), you will design and develop systems and deploy advanced technology solutions for our customers. You will work as part of tightly knit Agile software teams to develop, integrate, and maintain software systems deployed to meet unique mission needs in customer directed environments. You ensure that our software solutions meet the highest standards of quality, reliability, and performance as well as user needs. This position requires an active Top Secret (TS) clearance. The role can be based at any of these three STR sites: Dayton, OH, Arlington, VA, and Woburn, MA. Applicants should expect to travel and work on site at customer facilities at 1 week per month on average. What you will do: • Develop new software components for a key operational capability, • Conduct software integration and test activities in supporting a small integrated development team, • Perform integration testing to ensure seamless interaction between different system components, • Deployment and Field Testing: Traveling to integration sites to build, test, and deploy software in real-world, operational environments (CONUS), • Triage and Debugging: Identifying and resolving software and system failures during integration, • Participate in test planning & test events, requirements reviews, code reviews, and architecture/software implementation reviews to improve code quality and maintainability, • This position requires an Active Top Secret Security clearance, for which U.S citizenship is needed by U.S. Government, • Motivated collaborator looking to work with a team of high-end researchers and engineers to develop and deploy software capabilities with mission impact, • BS in Computer Science or related technical field with at least 7 years of work experience (MS + 5 years, PhD + 2 years, or equivalent experience will be considered), • Experience designing, building, testing, debugging, and maintaining a large codebase, • Experience with the following:, • Object-oriented programming principles, • Service oriented architectures or micro-service architectures, • Containerization/orchestration tools such as Docker and Kubernetes, • Agile software lifecycle methodologies and tools, such as JIRA and SonarQube, • DevOps or CI/CD tools such as Gitlab, • Test-driven development methodologies, • A demonstrated ability to adopt new languages, libraries, and technologies, • Organized, detail-oriented, and with an ability to work both independently and collaboratively, • Integration and Test Experience, with a focus on Java applications, • SCI Eligible, • Experience with automated testing tools and frameworks (e.g., JUnit, TestNG, Selenium). The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description Overview At Credence, we support our clients’ mission-critical needs, powered by technology. We provide cutting-edge solutions, including AI/ML, enterprise modernization, and advanced intelligence capabilities, to the largest defense and health federal organizations. Through partnership and trust, we increase mission success for war-fighters and secure our nation for a better future. We are privately held, are repeatedly recognized as a top place to work, and have been on the Inc. 5000 Fastest Growing Private Companies list for the last 12 years. We practice servant leadership and believe that by focusing on the success of our clients, team members, and partners, we all achieve greater success. Credence has an immediate opening for a Senior Program Manager who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at WPAFB, OH. F-16 “Viper” AFLCMC/WAM is headquartered at Hill Air Force Base with units located at Wright-Patterson Air Force Base, Tyndall Air Force Base, Eglin Air Force Base, and Davis-Monthan Air Force Base. The F-16 “Viper” is a multi-role fighter jet delivering air-to-air, air-to-ground, and surveillance capabilities for the United States Air Force (USAF) and Coalition Partners. The F-16 program has the largest Foreign Military Sales (FMS) program in U.S. history producing over 4,500 jets for 24 countries. Each F-16 FMS case is uniquely tailored to country requirements / development / funding. Presently, FMS production orders exist through 2030. Additionally, the F-16 program includes the Multi-National Fighter Program (MNFP). MNFP is not a typical FMS program, but a unique, cooperative USAF and development program implemented through the FMS process under the framework of a Memorandum of Understanding (MOU). MNFP began in 1975 with the countries of Belgium, Denmark, the Netherlands, and Norway; Portugal joined in 2000. Responsibilities include, but are not limited to the duties listed below • Assist in risk management, cost, schedule, and performance of various software development efforts in a program management role, and report on them monthly through use of the Project Management Resource Tool (PMRT)., • Assist to interpret, organize, execute and coordinate assignments within the context of the Government acquisition process., • Assist to explore software development and integration, definition of scope, and selection of problems for investigation., • Support the program director at executive levels within the Government and other Contractor organizations, including major program reviews, inspections, conferences, and other program evaluations and major milestone events., • Assist to establish and maintain contacts between the program office, supporting Government offices, other Contractors, and higher headquarters’ mid-to upper-level staff., • Assist with the analysis of war fighter requirements with ACC and serve as key advisor to F-16 Division leadership on mission-critical capability trades., • Support war fighter Urgent Operational Needs (UONs), and support UON execution teams through recommendation of accelerated test concepts, minimum levels of integration required to satisfy operational need, and trade-offs among risk, schedule, performance, and cost., • Support the OFP software development and testing processes, interpreting user requirements, and possesses a thorough understanding of the MNFP cost-sharing process., • Assist with strategic planning, program planning, systems integration, weapons integration, requirements assessment, and program evaluations., • Assist to apply integration, communication, coordination, organizational, and planning expertise to technical and acquisition efforts across multiple F-16 integration activities., • Support Technical Interchange Meetings (TIMs) and working groups, serving as a liaison between user requirements and organic engineering activity., • Assist to develop concise, coherent program status briefings to senior staff., • Support the chief engineer in investigation and resolution of fielded program deficiencies, to include support of Crisis Management Teams (CMTs)., • Support and conduct studies and analysis of tradeoffs for incorporation of potential capabilities in future USAF OFP software., • Advise and assist the Government with complex program management tasks, coordinating and managing multiple contracts, and identifying and confirming the annual funding requirements for those contracts., • Assist with project cost estimates and have knowledge of the system engineering process and project Configuration Management (CM) requirements., • Assist to investigate, analyze, plan, design, develop, implement, and evaluate solutions for project / program efforts; provide expert-level issue resolution and recommendation support to achieve desired program outcomes to situations that may include, but not be limited to, the following functional areas: program management, logistics, maintenance, supply, financial management (FM), test, security management, information management, and contracting., • Support efforts including, but not limited to, strategic planning, program planning, systems integration, weapons integration, requirements assessment, and program evaluations., • Assist to apply broad user war fighter requirements and applying solutions through the acquisition process., • Define requirements with ACC and serve as key advisor to System Program Office (SPO) leadership on mission critical capability trades., • Support programs in an international environment, including support to implement the requirements of foreign governments., • Support development and test activities required to support warfighter UON., • Suppport UON execution teams by recommending accelerated test concepts, minimum levels of integration required to satisfy operational need, and trade-offs among risk, schedule, performance, and cost., • Assist with interpreting user requirements, to implement the MNFP cost sharing process., • Assist with management of risk, cost, schedule, and performance of various OFP software development efforts., • Assist with integration, communication, coordination, organizational, and planning support to technical and acquisition processes across multiple F-16 integration activities., • Support F-16 avionics and weapons capabilities; complex weapon(s) integration; aircraft operations and employment; development of F-16 PVI; OFP software requirements development; development processes under the MNFP; aircraft mission and support equipment; authorized aircraft configurations and capabilities; aircraft subsystems; systems integration; advanced sensor integration., • Coordinate the upgrade identification and requirements development process for new USAF hardware integration and software development programs. The Contractor shall complete program technical assessments and assist with developing cost estimates in support of the integration and software-development programs. The Contractor shall support Government/Contractor work-share agreements between LM Aero to organic software development at OO-ALC, for development efforts and support complex subsystem integration/coordination for advanced sensors, weapons, and electronic warfare equipment., • Support the transition and stand-up of an organic software development capability for F-16 to assess and coordinate unique requirements and funding timelines., • Assist with management of test execution, integration and sustainment support of various software upgrades such as the Automatic Ground Collision Avoidance System (AGCAS) integration in current OFP software., • Support the Avionics System Requirements Review Conference (ASRRC) and Cockpit Review Team (CRT) process for initial requirements definition, and Pilot Vehicle Interface (PVI) development to support HQ ACC initiatives., • Assist with bridging process between acquisition and user communities such as military fighter/bomber pilots, navigators, weapons systems officers, and software development., • Support studies and analysis of tradeoffs for incorporation of potential capabilities in future F-16 USAF or FMS software., • Manage the software supporting AESA radar design try-out activities for radar risk reduction., • Support and conduct preparations and review pertinent data, coordinate with applicable managers, and finalize related documentation/information for verbal presentation of the plan status at required meetings. Meetings may include but are not limited to IPT meetings, Program Management Reviews (PMRs), TIMs, and other required conferences., • Assist in the preparation of concise, coherent program status briefing charts to support meetings with senior staff., • Support the F-16 Chief Engineer in investigation and resolution of fielded program deficiencies, to include support of CMT., • Clearance: Secret, • Master’s or Doctoral Degree in a related field and a minimum of 10 ten years of experience in the respective technical / professional discipline being performed, at least five of which must be in the DoD or, • Bachelor’s Degree in a related field and a minimum of 12 years of experience in the respective technical/professional discipline being performed, five of which must be in the DoD or, • Fifteen years of directly related experience with proper certifications, eight of which must be in the DoD, • Minimum of ten years of experience with fighter/bomber, or related aircraft experience with detailed knowledge of all USAF program requirements and recommend at least five of those years be direct F-16 and an understanding of fighter weapons systems integration operational employment and weapons capability and software development processes, USAF Major Command expertise, ideally at the Headquarters (HQ) USAF or HQ ACC level, as a background for understanding broad user warfighter requirements; recommend knowledge and experience working in an international environment supporting the requirements of allied foreign governments, • Experience in F-16 avionics and weapons capabilities; complex weapon(s) integration; aircraft operations and employment; development of F-16 Pilot Vehicle Interface (PVI); Operational Flight Program (OFP) software requirements development; development processes under the MNFP; aircraft mission and support equipment; authorized aircraft configurations and capabilities; aircraft subsystems; systems integration; advanced sensor integration., • Minimum of five years of experience in test and test management, to include software development., • Fighter aircraft operational knowledge., • Senior leader-level experience at the HQ USAF or HQ ACC level, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development Please join us, as together we build a better world one mission at a time powered by Technology and its People! #LI-Onsite #Credence #veteranemployment #militaryspouse #milspouse #hireavet #militaryveteran #militaryfriendly #transitioningmilitary #veterans #militarytransition #militaryfamilies #msep #militarytocivilian #military #federalcontractingjobs #defensecontracting #defenseindustryjobs

Job Description Overview At Credence, we support our clients’ mission-critical needs, powered by technology. We provide cutting-edge solutions, including AI/ML, enterprise modernization, and advanced intelligence capabilities, to the largest defense and health federal organizations. Through partnership and trust, we increase mission success for war-fighters and secure our nation for a better future. We are privately held, are repeatedly recognized as a top place to work, and have been on the Inc. 5000 Fastest Growing Private Companies list for the last 12 years. We practice servant leadership and believe that by focusing on the success of our clients, team members, and partners, we all achieve greater success. Credence has an immediate opening for a Senior Program Manager who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at WPAFB, OH. F-16 “Viper” AFLCMC/WAM is headquartered at Hill Air Force Base with units located at Wright-Patterson Air Force Base, Tyndall Air Force Base, Eglin Air Force Base, and Davis-Monthan Air Force Base. The F-16 “Viper” is a multi-role fighter jet delivering air-to-air, air-to-ground, and surveillance capabilities for the United States Air Force (USAF) and Coalition Partners. The F-16 program has the largest Foreign Military Sales (FMS) program in U.S. history producing over 4,500 jets for 24 countries. Each F-16 FMS case is uniquely tailored to country requirements / development / funding. Presently, FMS production orders exist through 2030. Additionally, the F-16 program includes the Multi-National Fighter Program (MNFP). MNFP is not a typical FMS program, but a unique, cooperative USAF and development program implemented through the FMS process under the framework of a Memorandum of Understanding (MOU). MNFP began in 1975 with the countries of Belgium, Denmark, the Netherlands, and Norway; Portugal joined in 2000. Responsibilities include, but are not limited to the duties listed below • Assist in risk management, cost, schedule, and performance of various software development efforts in a program management role, and report on them monthly through use of the Project Management Resource Tool (PMRT)., • Assist to interpret, organize, execute and coordinate assignments within the context of the Government acquisition process., • Assist to explore software development and integration, definition of scope, and selection of problems for investigation., • Support the program director at executive levels within the Government and other Contractor organizations, including major program reviews, inspections, conferences, and other program evaluations and major milestone events., • Assist to establish and maintain contacts between the program office, supporting Government offices, other Contractors, and higher headquarters’ mid-to upper-level staff., • Assist with the analysis of war fighter requirements with ACC and serve as key advisor to F-16 Division leadership on mission-critical capability trades., • Support war fighter Urgent Operational Needs (UONs), and support UON execution teams through recommendation of accelerated test concepts, minimum levels of integration required to satisfy operational need, and trade-offs among risk, schedule, performance, and cost., • Support the OFP software development and testing processes, interpreting user requirements, and possesses a thorough understanding of the MNFP cost-sharing process., • Assist with strategic planning, program planning, systems integration, weapons integration, requirements assessment, and program evaluations., • Assist to apply integration, communication, coordination, organizational, and planning expertise to technical and acquisition efforts across multiple F-16 integration activities., • Support Technical Interchange Meetings (TIMs) and working groups, serving as a liaison between user requirements and organic engineering activity., • Assist to develop concise, coherent program status briefings to senior staff., • Support the chief engineer in investigation and resolution of fielded program deficiencies, to include support of Crisis Management Teams (CMTs)., • Support and conduct studies and analysis of tradeoffs for incorporation of potential capabilities in future USAF OFP software., • Advise and assist the Government with complex program management tasks, coordinating and managing multiple contracts, and identifying and confirming the annual funding requirements for those contracts., • Assist with project cost estimates and have knowledge of the system engineering process and project Configuration Management (CM) requirements., • Assist to investigate, analyze, plan, design, develop, implement, and evaluate solutions for project / program efforts; provide expert-level issue resolution and recommendation support to achieve desired program outcomes to situations that may include, but not be limited to, the following functional areas: program management, logistics, maintenance, supply, financial management (FM), test, security management, information management, and contracting., • Support efforts including, but not limited to, strategic planning, program planning, systems integration, weapons integration, requirements assessment, and program evaluations., • Assist to apply broad user war fighter requirements and applying solutions through the acquisition process., • Define requirements with ACC and serve as key advisor to System Program Office (SPO) leadership on mission critical capability trades., • Support programs in an international environment, including support to implement the requirements of foreign governments., • Support development and test activities required to support warfighter UON., • Suppport UON execution teams by recommending accelerated test concepts, minimum levels of integration required to satisfy operational need, and trade-offs among risk, schedule, performance, and cost., • Assist with interpreting user requirements, to implement the MNFP cost sharing process., • Assist with management of risk, cost, schedule, and performance of various OFP software development efforts., • Assist with integration, communication, coordination, organizational, and planning support to technical and acquisition processes across multiple F-16 integration activities., • Support F-16 avionics and weapons capabilities; complex weapon(s) integration; aircraft operations and employment; development of F-16 PVI; OFP software requirements development; development processes under the MNFP; aircraft mission and support equipment; authorized aircraft configurations and capabilities; aircraft subsystems; systems integration; advanced sensor integration., • Coordinate the upgrade identification and requirements development process for new USAF hardware integration and software development programs. The Contractor shall complete program technical assessments and assist with developing cost estimates in support of the integration and software-development programs. The Contractor shall support Government/Contractor work-share agreements between LM Aero to organic software development at OO-ALC, for development efforts and support complex subsystem integration/coordination for advanced sensors, weapons, and electronic warfare equipment., • Support the transition and stand-up of an organic software development capability for F-16 to assess and coordinate unique requirements and funding timelines., • Assist with management of test execution, integration and sustainment support of various software upgrades such as the Automatic Ground Collision Avoidance System (AGCAS) integration in current OFP software., • Support the Avionics System Requirements Review Conference (ASRRC) and Cockpit Review Team (CRT) process for initial requirements definition, and Pilot Vehicle Interface (PVI) development to support HQ ACC initiatives., • Assist with bridging process between acquisition and user communities such as military fighter/bomber pilots, navigators, weapons systems officers, and software development., • Support studies and analysis of tradeoffs for incorporation of potential capabilities in future F-16 USAF or FMS software., • Manage the software supporting AESA radar design try-out activities for radar risk reduction., • Support and conduct preparations and review pertinent data, coordinate with applicable managers, and finalize related documentation/information for verbal presentation of the plan status at required meetings. Meetings may include but are not limited to IPT meetings, Program Management Reviews (PMRs), TIMs, and other required conferences., • Assist in the preparation of concise, coherent program status briefing charts to support meetings with senior staff., • Support the F-16 Chief Engineer in investigation and resolution of fielded program deficiencies, to include support of CMT., • Clearance: Top Secret, • Master’s or Doctoral Degree in a related field and a minimum of 10 ten years of experience in the respective technical / professional discipline being performed, at least five of which must be in the DoD or, • Bachelor’s Degree in a related field and a minimum of 12 years of experience in the respective technical/professional discipline being performed, five of which must be in the DoD or, • Fifteen years of directly related experience with proper certifications, eight of which must be in the DoD, • Minimum of ten years of experience with fighter/bomber, or related aircraft experience with detailed knowledge of all USAF program requirements and recommend at least five of those years be direct F-16 and an understanding of fighter weapons systems integration operational employment and weapons capability and software development processes, USAF Major Command expertise, ideally at the Headquarters (HQ) USAF or HQ ACC level, as a background for understanding broad user warfighter requirements; recommend knowledge and experience working in an international environment supporting the requirements of allied foreign governments, • Experience in F-16 avionics and weapons capabilities; complex weapon(s) integration; aircraft operations and employment; development of F-16 Pilot Vehicle Interface (PVI); Operational Flight Program (OFP) software requirements development; development processes under the MNFP; aircraft mission and support equipment; authorized aircraft configurations and capabilities; aircraft subsystems; systems integration; advanced sensor integration., • Minimum of five years of experience in test and test management, to include software development., • Fighter aircraft operational knowledge., • Senior leader-level experience at the HQ USAF or HQ ACC level, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development Please join us, as together we build a better world one mission at a time powered by Technology and its People! #LI-Onsite #Credence #veteranemployment #militaryspouse #milspouse #hireavet #militaryveteran #militaryfriendly #transitioningmilitary #veterans #militarytransition #militaryfamilies #msep #militarytocivilian #military #federalcontractingjobs #defensecontracting #defenseindustryjobs

Phalanx Griffon (PG) is the Air Force’s flagship airborne node connecting warfighters to decision‑quality data across the DAF BATTLE NETWORK. As Journeyman Systems Engineer, you will own the digital thread that turns brilliant ideas into flight‑ready capability for Major Release 2 (FY 25 – 27)—driving requirements, architecture, and model‑based systems engineering across hardware (Nomad), software (Smith), and operations (Watch). Essential Job Functions: Architect & Model the System‑of‑Systems * Lead creation and upkeep of the government‑owned SysML / CAMEO model, DoDAF views, and interface‑control documents (ICDs) that capture Nomad‑Smith‑Watch interactions with the Digital Infrastructure (DI), SATCOM links, and cross‑domain solutions. Required to input requirements into CAMEO. * Ensure every requirement traces to a verification method and mission thread, supporting CJADC2 and Operational Imperative #2 objectives. Requirements & Baseline Management * Elicit, decompose, and manage stakeholder needs in DOORS‑NG (or equivalent); chair requirements reviews, delta boards, and configuration‑control boards. * Maintain the Technical Baseline and drive change packages through digital workflows, preserving model / document synchronization. Integration Leadership * Partner with IPT leads to translate digital designs into Integration SIL builds; resolve cross‑domain, crypto, power, and data‑bus interface issues quickly. * Feed lessons learned back into the model, ensuring the next sprint starts with an accurate baseline. Verification & Validation Alignment * Collaborate with Test & Flight‑Test teams to develop the Verification Cross‑Reference Matrix (VCRM) and ensure early “shift‑left” validation of safety, cyber, and performance requirements. * Provide pre‑flight technical concurrence for Interim Authorizations To Test (IATTs) and air‑worthiness packages. Risk, Metrics & Reviews * Maintain the technical risk register, conduct root‑cause analyses, and brief burn‑down plans to senior DAF leadership. * Feed schedule, maturity, and performance metrics into the Integrated Master Schedule (IMS) and digital dashboards. Mentorship & Culture * Coach mid‑level engineers on MBSE best practices, Agile/SAFe workflows, and DevSecOps culture in a classified environment. * Foster a collaborative, “model‑first” mindset across Government and industry teammates. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. A High School Diploma plus 15 years of directly related experience with proper certifications as described in the Functionally Aligned Job Descriptions, 5 of which must be in the DoD or a BA/BS plus 10 years of experience in the respective technical/professional discipline being performed, 3 of which must be in the DoD. Active TS/SCI clearance. MBSE experience. Proficiency with SysML modeling tools (CAMEO/MagicDraw, Rhapsody, or equivalent) and requirements databases (DOORS, Jama). Demonstrated experience leading multi‑disciplinary design reviews (SRR, PDR, CDR) and managing technical baselines in a digital‑engineering environment. Solid grasp of MIL‑STD avionics power, data links (Link‑16/22, TTNT, OMS/UCI), SATCOM, Type‑1 crypto, and RMF / IA compliance. Desired Skills: INCOSE CSEP / ESEP or DAU ENG/SAE Level III certification. Prior work on ABMS, CJADC2, or other open‑architecture airborne networking efforts. Familiarity with DevSecOps pipelines (Platform One / Iron Bank) and automated model validation (ModelCenter, Cameo Simulation Toolkit). Experience briefing SES / GO audiences and shaping acquisition strategy documents (AS, SEP, SEMP, TEMP).

DCS has an exciting opportunity for a Systems Engineer providing support to the Command, Control, Communications, and Battle Management Division (C3BM). Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. C3BM supports execution in many different focus areas. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space. The candidate will provide Systems Engineering assistance that applies a broad theoretical and practical knowledge of system engineering to the acquisition process. The candidate will also provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal). This is a full-time position that can be worked out of Hanscom AFB, MA or Wright Patterson AFB, Dayton, OH. Essential Job Functions: Candidate selected will be aligned to 1 of 5 Mission Integration Teams (MITs). The five mission areas are Air, Maritime, Land, homeland Air Defense, and Cross Cutting. Members of the MITs manage the DAF C3BM MIT Process for their respective MIT. The DAF C3BM MIT Process receives operational and functional requirements from the Operational Community and conducts a(an): 1. Operational Analysis to translate operational and functional requirements into technical requirements., 2. Architecture Definition to design the capability’s architecture while ensuring integration/interoperability with the broader DAF C3BM enterprise architecture., 3. Risk assessment of the capability, and if risk needs to be mitigated, the MIT works with the Science & Technology Community to address., 4. Execution management strategy providing the capability’s requirements to the Acquisition Community., 5. Test and Evaluation Strategy with the Acquisition Community to work with the Test and Evaluation Community for exercise and experimentation activities before delivery to the Operational Community. Serves a Mission Integration Team (MIT) system of systems architecture design and development engineers. Reviews current Department of Defense (DoD) architecture models and designs a migration path to a future state that enables seamless sensor-to-shooter connectivity. Drives interconnectivity between represented PEOs and weapon systems. Captures as is and to be states driven by MIT stressing engagement scenarios. Engages the joint and coalition community to design and evaluate an architecture that will connect any sensor to any shooter irrespective of service or coalition. Identifies, assesses, and matures innovative and affordable concepts meeting current and future AF needs through multi-domain expertise, analytics, and modeling, simulation & analysis tool development. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. Must have and be able to maintain an active Top Secret level clearance and be SCI eligible. Bachelor’s in a related field and 5 years of experience. Desired Skills: Bachelor's or Master's Degree in a related field and 3+ years of experience and within the DoD sector. Familiar with cloud-based systems, including management and projection of cost and performance. Familiar with agile methods and CI/CD, DevSecOps and DevOps principals. Comprehensive knowledge of principles, policies and practices of systems acquisition and program management, as defined in DoDI 5000.02 and 5000.75, as well as knowledge of roles and relationships within the DoD and the Air Force. Possess knowledge of qualitative and quantitative techniques for gathering, analyzing, and measuring the effectiveness, efficiency and productivity of acquisition programs Possesses the ability to effectively communicate orally and in writing, providing quality acquisition and program documentation including but not limited to briefings, documents, and plans.

Warfare Systems comprises cyber and mission IT; electronic warfare; and C5ISR systems. The RF Test Engineer performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Interest in EW and Radar Signal Pr

I will create and support model-based systems engineering (MBSE) artifacts across a varied portfolio of products and applications. A strong foundation in modeling and simulation of intricate systems. I will design and uphold requirements, architectures, and system designs for complex technical syste

The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems. Reporti

Bachelors degree in Engineering, Architecture, Project Management or a related discipline. Proficient in Microsoft Office applications and CRM / ERP software systems.

Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and

Foster strong relationships with clients, architects, engineers, and other key stakeholders. Bachelor’s degree in Construction Management, Civil Engineering, or a related field.

MAC Construction is a multi-generational family business with over 50 years of excellence in commercial construction.Now led by the 3rd generation of McEnery family members, brothers Steve and Matt, we continue the legacy of our founders by building enduring projects and partnerships with clients.Ou

Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems * Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Position Overview: The Manufacturing Engineering (with an Electrical Engineering empha

Minimum 5+ years experience with Mechanical, Electrical, Plumbing and Fire Protection Systems. Bachelor of Science (technical/engineering degree) Mechanical, HVAC, Plumbing, Electrical and Fire protection.

Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties woul

Bachelor’s degree in Construction Management, Engineering or applicable discipline and experience relative to project size/scope.

Strong understanding of electrical systems, drawings, and specs.

Engineering, Construction Management, or a related field.

Build strong relationships with owners, subcontractors, architects, and engineers. Support and mentor Project Engineers and Assistant PMs (as applicable). Construction Management, Engineering degree, or equivalent experience.

Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties woul

The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems. Reporti

This role focuses on the design and optimization of power transformers, supporting the transition to smart grids, renewable energy integration, and advanced digital monitoring systems. Knowledge of core materials, winding types, insulation systems, electromagnetics, and fluid dynamics. We are commit

Experience in modular HVAC manufacturing, or engineered systems is highly desired. Project Manager's monitor project costs, prepare monthly reports for leadership, and coordinate engineering, submittals, production release, and procurement of major components, including invoice approvals. Project Ma

This role focuses on the design and optimization of power transformers, supporting the transition to smart grids, renewable energy integration, and advanced digital monitoring systems. Contribute to Westrafo's mission of enabling the global energy transition by designing high-performance, eco-consci

This role focuses on the design and optimization of power transformers, supporting the transition to smart grids, renewable energy integration, and advanced digital monitoring systems. We are committed to excellence and are looking to expand our team with dedicated professionals who share our passio

A successful candidate performs B-52H Systems Integration and Modernization Analysis following disciplined systems engineering and B-52 processes. FTI is seeking a Senior Aeronautical Systems Engineer to support USAF acquisition on modernization of aircraft systems in a variety of areas (i. Supporti

This role focuses on the design and optimization of power transformers, supporting the transition to smart grids, renewable energy integration, and advanced digital monitoring systems. Develop mechanical layouts and cooling systems for structural integrity and thermal management according to custome

Conduct research, design, development, and testing of information processing hardware such as computer systems, network systems, microprocessors, microcontrollers, microcomputers, firewalls, routers, and circuit designs. Develop mathematical/physics-based algorithms for representing aerospace vehicl

This role focuses on the design and optimization of power transformers, supporting the transition to smart grids, renewable energy integration, and advanced digital monitoring systems. We are committed to excellence and are looking to expand our team with dedicated professionals who share our passio