Trabajos ups en Springfield, MissouriCrear alertas

Job Description Specialty Air Conditioning has served the Springfield area for over 29 years with a reputation for quality work and treating our team like family. In 2025, we partnered with Meriton, a national HVAC manufacturer representative company. That means local, hands-on leadership, backed by national resources and long-term stability. At Specialty Air Conditioning, we believe great technicians deserve respect, support, and a clear path forward. For more than 29 years, we've built our reputation in Springfield on quality work and treating our people like family. In 2025, we partnered with Meriton, a national HVAC manufacturer representative—giving you the best of both worlds: local leadership with national resources and long-term stability. We're not just looking for a technician. We're looking for top LG VRF Technicians who want ownership of their work, pride in their craft, and a career—not just a job. What Sets Specialty Air Conditioning Apart: • 100% employer-paid health insurance for you and your family, • Competitive pay: $28–$35/hour, based on experience, • Paid holidays and PTO totaling 28 days, with increases after 1 year and 5 years of employment, • 401(k) with 6% company match, • Take-home company vehicle with fuel included, • Tool and boot reimbursement, • Optional overtime, • Factory training and certifications, • Career advancement opportunities through Meriton's national network, • Hands-on leadership—work alongside experienced leaders, including the founder, • Start-up, service, install, and maintain commercial HVAC VRF systems (Daikin, LG, Mitsubishi, Toshiba, Carrier), • Troubleshoot electrical and mechanical issues on VRF systems and commercial rooftop units, • Perform system retrofits, start-ups, and commissioning, • Diagnose improper installations and optimize performance, • Use wiring diagrams and blueprints to perform work accurately, • Maintain safety standards and meet code requirements, • Communicate clearly with clients and our office team, • 2+ years commercial VRF required, • 2+ years of HVAC experience (commercial service focus) preferred, • EPA Universal Certification required, • Valid driver's license with clean driving record required, • Strong diagnostic, electrical, and mechanical skills, • Ability to work independently and with a team, • Physically able to lift 50–100 lbs and work in field conditions, • VRF factory certifications (Daikin, LG, Mitsubishi, etc.) preferred, • Experience with Building Automation Systems (BAS) or Controls preferred, • Ability to lift 50–100 lbs and work in field conditions, • Comfort working on rooftops, ladders, and in tight spaces, • Ability to stand, kneel, and work for extended periods, • Manual dexterity for electrical, mechanical, and diagnostic work, • Hourly, Non-Exempt (Full-Time) About Specialty Air Conditioning & Meriton: Specialty Air Conditioning is a trusted, locally owned company in Springfield, MO, with nearly three decades of experience. We're built on honesty and integrity—both in the way we serve our customers and how we treat our team. Our partnership with Meriton allows us to offer advanced training, better tools, and long-term growth opportunities—without losing our small-company culture. We believe in investing in our people and building careers that last. Specialty Air Conditioning and Meriton are Equal Opportunity Employers. Employment decisions are made without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status, or any other legally protected status. Reasonable accommodations will be provided as required by law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description Specialty Air Conditioning has served the Springfield area for over 29 years with a reputation for quality work and treating our team like family. In 2025, we partnered with Meriton, a national HVAC manufacturer representative company. That means local, hands-on leadership, backed by national resources and long-term stability. At Specialty Air Conditioning, we believe great technicians deserve respect, support, and a clear path forward. For more than 29 years, we've built our reputation in Springfield on quality work and treating our people like family. In 2025, we partnered with Meriton, a national HVAC manufacturer representative—giving you the best of both worlds: local leadership with national resources and long-term stability. We're not just looking for a technician. We're looking for top commercial HVAC technicians who want ownership of their work, pride in their craft, and a career—not just a job. What Sets Specialty Air Conditioning Apart: • 100% employer-paid health insurance for you and your family, • Competitive pay: $28–$35/hour, based on experience, • Paid holidays and PTO totaling 28 days, with increases after 1 year and 5 years of employment, • 401(k) with 6% company match, • Take-home company vehicle with fuel included, • Tool and boot reimbursement, • Optional overtime, • Factory training and certifications, • Career advancement opportunities through Meriton's national network, • Hands-on leadership—work alongside experienced leaders, including the founder, • Ability to troubleshoot, service, and repair commercial and light industrial HVAC systems, • Diagnose and resolve complex issues with RTUs, split systems, economizers, VFDs, and controls, • Perform start-ups, commissioning, and retrofits to improve system performance, • Read and interpret blueprints, wiring diagrams, and manufacturer specifications, • Communicate clearly with customers, project managers, and office staff, • Maintain accurate service documentation, • Work independently while supporting and guiding junior technicians when needed, • Deliver quality workmanship, professionalism, and integrity every day, • EPA Universal Certification, • 2–10 years of commercial HVAC service experience, • Strong troubleshooting and mechanical skills, • Experience with Daikin, Carrier, Trane, Lennox, or similar systems, • Knowledge of VRF systems, VFDs, and building automation controls, • Comfortable mentoring or supporting less-experienced technicians, • Solid customer service and communication skills, • Basic technology skills (mobile apps, service documentation), • Ability to lift 50–100 lbs and work in field conditions, • Comfort working on rooftops, ladders, and in tight spaces, • Ability to stand, kneel, and work for extended periods, • Manual dexterity for electrical, mechanical, and diagnostic work, • Hourly, Non-Exempt (Full-Time) Specialty Air Conditioning is a trusted, locally owned company in Springfield, MO, with nearly three decades of experience. We're built on honesty and integrity—both in the way we serve our customers and how we treat our team. Our partnership with Meriton allows us to offer advanced training, better tools, and long-term growth opportunities—without losing our small-company culture. We believe in investing in our people and building careers that last. Specialty Air Conditioning and Meriton are Equal Opportunity Employers. Employment decisions are made without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status, or any other legally protected status. Reasonable accommodations will be provided as required by law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Hiring CDL-A Truck Drivers • Earn "The Best Money in Trucking" - Start at 70CPM; up to $2,000/wk, • Sick of Student Pay? - Hit your one year...earn in high gear! It's pretty simple-we're a no-nonsense, no-bull trucking company run by grown-ups. We pay what we say and do everything we can to keep top drivers happy-at home and on the road. Apply today for more details. Company Truck Driver Job Info • Earn up to $90,000 per year (70CPM) and $2,000/week on top weeks. If you bring the time and talent, K&B will bring the freight, pay and equipment to make it happen., • Weekly minimum guaranteed pay as high as $1,610. We have skin in the game to keep you running. If you're giving us time, you're getting paid., • Drive reliable, modern equipment: Freightliner Cascadia refrigerated trailers; tractors with APUs, fridges, inverters and more., • $1,000 sign-on bonus paid with first check, • Competitive insurance benefits - medical, dental, vision, life, • Drop pay, detention pay, layover pay, • Clean inspection, safety, and referral bonuses Driver Requirements • Valid Class A CDL

Hiring CDL-A Truck Drivers • EARN "THE BEST MONEY IN TRUCKING" - Start at 70CPM; min. $1,610/wk guaranteed, • RUN HARD. LIVE HARDER. - Extended miles, extended home time, premium pay It's pretty simple-we're a no-nonsense, no-bull trucking company run by grown-ups. We pay what we say and do everything we can to keep top drivers happy-at home and on the road. Apply today for more details. Road Warrior OTR Job Info • Not for every driver... Only the best. Road Warriors take on the miles others can't. Run long miles, earn big payoffs, and enjoy real rest (up to 20 days) when you're home., • Earn up to $2,000/week on top weeks. With industry-leading base pay (70CPM) and additional accessory pay and bonus incentives, Road Warriors make THE best money in trucking., • $1,610 weekly minimum guaranteed pay. We have skin in the game to keep you running. If you're giving us time, you're getting paid., • Drive reliable, modern equipment: Freightliner Cascadia refrigerated trailers; tractors with APUs, fridges, inverters and more., • $1,000 sign-on bonus paid with first check, • Competitive insurance benefits - medical, dental, vision, life, • Drop pay, detention pay, layover pay, • Clean inspection, safety, and referral bonuses Driver Requirements • Current Class A CDL

Hiring CDL-A Truck Drivers • PAY THAT MOVES YOUR FORWARD - Start at 62-70CPM, • GUARANTEED TO PAY - Weekly minimums from $1,426-$1,564 It's pretty simple-we're a no-nonsense, no-bull trucking company run by grown-ups. We pay what we say and do everything we can to keep top drivers happy-at home and on the road. Apply today for more details. Midwest Regional Truck Driver Job Overview • Strong pay with real guarantees. Earn 62-70CPM, with top drivers making up to $85,000+ per year. Guaranteed weekly pay starts at $1,426-$1,564, so you're paid even when freight slows., • Big weeks when you want them. On top weeks, drivers earn $1,850-$2,000, depending on job and miles - rewarding drivers who want to run., • Home-time options that fit your goals. Choose weekend home time, bi-weekly home time, or extended time out, depending on your location and the job you select., • Easy freight keeps your wheels turning. Run 100% no-touch freight, with additional pay for drop, detention, and layovers, so your time is respected., • Medical, dental, vision, and life insurance, • Paid time off, • Predictable home time programs, • Freightliner Cascadia equipment, • Tractors equipped with APUs, refrigerators, and inverters Driver Requirements • Valid Class A CDL

Job Description POSITION SUMMARY: Reporting to the Production Supervisor, this position will remove component parts for testing and cleaning. This position involves intense physical activity, and use of several hand tools and machines. Operators also perform minor machine set-ups, general maintenance, and area housekeeping. This position will require decisions determining the quality of the products and services being offered. Physical effort requirements consist of regular lifting, pushing and pulling material. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Remove component parts for testing and cleaning., • Coordinate duties with disassembly team., • Use Air and Hand tools., • Participate in and support the principles of Open Book Management and recognize the responsibilities of being an owner of the company., • Required to follow safety standards. Required to wear all personal protective equipment in designated areas., • Perform set-up, material handling duties, and minor general maintenance., • Ability to effectively perform similar positions on the floor at any point in time., • Participate in the processes of continuous improvement., • Operator is responsible for all area housekeeping., • Assist in development of Work Instructions and operator training., • Promote a positive working environment in order to achieve the organization’s goals. Rewards for you: • Exceptional health benefits, • Vacation & Holiday Pay, • 5% 401(k) Match, • 100% Employee Owned, • Training and Advancement Opportunities, • 100% Tuition Reimbursement, • Quarterly Bonus Program, • Outstanding Company Culture How we do it: Through a culture of ownership! We’re committed to creating a business of business-people through teaching Financial Literacy and playing The Great Game of Business. Our company is 100% Employee Owned and associates share in the wealth they help create. SRC Technologies Group, a subsidiary of SRC Holdings Corporation (SRC), is headquartered in Springfield, Missouri. SRC was founded in 1983 by Jack Stack, renowned author, lecturer, and CEO who created the business literacy and open book management program “The Great Game of Business”. Click here to find out more about The Great Game of Business Location: 2401 E. Sunshine St. Springfield, MO 65804

Job Description Packaging Operator (Night Shift) 7:45pm - 8:00am ($17.00/hr. + $1.00/hr. Shift Differential) Who we are looking for: We are currently searching for a Packaging Operator (Night Shift) to be based out of Springfield, MO. Reporting to Shift Supervisor, the Packaging Operator will be responsible for maintaining the quality of the extruded (HDPE pipe) product throughout the manufacturing and packaging process. The ideal candidate will have a high school diploma or equivalent. What you'll do: • Operator monitors and checks product during manufacturing process to meets the order requirements., • Monitors print and footage markings. Makes corrections as needed., • Monitors for continuous stripe (if required)., • Knows and understands the quality requirements for all products being produced., • Makes corrections as needed to meet order specifications and informs the line supervisor after making the necessary adjustments., • Uses reel components to build reels to size specifications., • Places the correct reel onto the coiler and prepare for startup. Reel must be in good physical condition., • Ensures wraps on reels are correct and neat., • Cuts conduit, ties-off and caps conduit when each reel is complete., • Removes reel from the coiler using a forklift and transports the finished product into inventory., • Grinds material scrap as it is produced and stacks scrap., • Assists the extrusion tech in line start-ups., • Maintains a neat and orderly work area., • Assists other packaging specialist in cutting conduit, tie-offs, and reel changes., • Follows all safety requirements for this position and all company safety guidelines., • Completes appropriate line operations paperwork to ensure accurate inventory transactions., • High school diploma or equivalent (GED)., • 1-2 years of experience performing the essential functions listed above, • Ability to perform simple math including the ability to add, subtract, multiply, divide and take measurements., • Ability to drive a forklift., • Must display very good organization and time management skills, • Must have excellent communication and interpersonal skills with the ability to interact with many types of personalities, • Complete any required training, • Have developed relationships with the key stakeholders for this role. Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $17.00/hr. + $1.00/hr. Shift Differential. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis.

At ___ and through our businesses including ___ and ___, we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. What’s in it for you: Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient environments, it’s our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business—it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what’s possible for a sustainable world. This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacturer, giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth. Thrive at work and at home: * Benefits kick in on DAY ONE for you and your family, including health insurance, and holistic wellness programs that include generous incentives – WE DARE TO CARE! * Family building benefits include fertility coverage and adoption/surrogacy assistance. * 401K match up to 6%, plus an additional 2% core contribution = up to 8% company contribution. * Paid Time off with up to 9 paid holidays, 15 vacation days and paid leave in support of volunteer and parental leave needs. * A regular schedule (with overtime opportunities) and most workdays you’ll be dispatched from your house. * Educational and training opportunities through company programs to keep you on top of technical innovations including Manufacturer (OEM) Level Training along with tuition assistance, and student debt support. * Knowledge support from the factory is a nationwide communications hub so that you have what you need to get the job done right the first time. * Premium equipment such as a late model, clean, and dependable company vehicle, high speed laptop, smartphone, specialized tools, uniforms, PPE and safety boot allowance. * Learn more about our benefits ___! Where is the work: This position has been designated as onsite, servicing customers out of our Springdale, MO location. What you will do: * Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work. * Represents the company by serving as the direct customer contact and is responsible for products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location. * Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units. * Displays team effort and dedication to customers by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays. * Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions. What you will bring: * A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC. Technical School or formal training is preferred. * Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad). * Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: * DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years. * EPA Certification Additional Requirements and Environmental Exposure: * Must be able to safely and legally operate a vehicle using a seat belt * Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties * Must be able to twist the trunk of your body 90 degrees in each direction * Must be able to squat and touch the floor with both hands * Must be able to reach your hands over your head * Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours * This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs. * Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less * Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal * Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet + * This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location This position has been designated by the company as safety sensitive. Compensation: Base Pay Range: $27-$35+/hr Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, geographic location where the work is performed. Equal Employment Opportunity: We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Job Description The Warehouse Associate position exists to ensure effective movement and management of inventory between the dock, sales floor, product repair, customer pickup and delivery. This role ensures the proper evaluation and shipping of merchandise and managing inventory flow. The Warehouse Associate is also responsible to unload trailers (Receiving). Individual contributor within a designated unit. Job Duties: • Fills order requests, stage merchandise and load for timely shipments (Shipping)., • Evaluates products and moves to designated zones for processing (Receiving), • Moves merchandise between dock, stockroom staging area, sales floor, customer pick-up or delivery, and removal of 'sold' merchandise from sales floor, • Audits and maintains accuracy of HFM (Hold for Merchandise) staging area, • Responsible for the assembly merchandise, • Assembles and disassembles fixtures for seasonal flexes or floor plan changes, • Processes receipts and ensures inventories are controlled, monitored, and logged, • Creates required documentation to log all shipments and deliveries to customers, • Ensures customer service through timely, attentive and friendly service during all customer pick-ups and inquiries, • Reports and responds to Store Management about unsafe and/or unethical conditions, • Develops "team" environment with the sales floor, providing timely movement of merchandise setting floor to presentation standards, • Protects Company assets by following company policies and direction for customer pick-up procedures, • Performs daily housekeeping, including cleaning and straightening, etc., • Miscellaneous duties as required, including as extra sales help as needed once cross trained, • Moves merchandise between dock, sales floor, customer pick-up or delivery and removal of 'sold' merchandise from sales floor in a timely manner, • Maintains safe/clean receiving area, • Must be able to lift and move at least fifty (50) pounds in weight to maintain flow and replenishment of merchandise. American Freight is an equal opportunity employer. We respect diversity and accordingly are an equal opportunity employer that does not discriminate on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex, gender, gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state or local laws. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, separation, recruitment, pay and other forms of compensation, access to facilities and programs, training and general treatment during employment. The Company maintains an internal complaint procedure to address any concerns regarding the hiring process.

Job DescriptionDescription: Position Summary: The RT Vent Field Clinician is a Respiratory Therapist providing respiratory patient care to Vent patients for optimal outcomes. Provides respiratory care to patients in alternate sites in accordance with AdaptHealth’s policies and procedures. Respiratory care will be preventative, rehabilitative, and palliative in nature. The RT will utilize all the resources available within the agency and community to accomplish care objectives. This position will provide education and care to the patient and communicate with team, physicians and referral sources and other patient agencies ensuring prompt attention to patient care issues. Essential Functions and Job Responsibilities: • Utilizes various sources of information to attain greater competence about his or her position, including attending educational events (including attending optional in-services) and asking questions., • Utilizes acquired knowledge to increase his or her competencies., • Consistently demonstrates ability to adequately complete all documentation and charting procedures in compliance with company policy and procedures., • Maintains complete and accurate patient files by updating all documents per company policy and procedures., • Reviews Plan of Treatments and Care Plans to assure they are accurate and up to date., • Documents procedures including how the patient tolerated a procedure, side effects and other pertinent information., • Assists with authorization for Ventilator referrals for patients., • Shows adequate knowledge of respiratory equipment and displays ability to utilize knowledge in the clinical setting., • Displays knowledge of assessment skills and demonstrates application of clinical skills during set-ups, follow-ups, and in-services., • Participates in discharge planning of highly technical cases., • Performs clinical assessments as needed and reports results and recommendations to the referral and physician., • Participates in highly technical discharges and prepares in advance to assure the patient and caregivers have a smooth transition to the home setting., • Performs in-services to hospital staff, referrals, other professionals regarding equipment & issues of clinical nature., • Follows up with physician and referrals regarding patient status and documents accurately and in a timely manner., • Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), infection control and hazardous materials handling., • Works to promote AdaptHealth by new program development, operational backup, personal visits, coordination of educational activities, etc., • Assume on-call responsibilities during non-business hours in accordance with company policy., • Uses clinical expertise in evaluating vent patients records once a ventilator set up has been completed by the branch Respiratory Therapist., • Ensures accuracy of prescriptions and plan of care was followed and documented. Also reviews delivery tickets, home inspection, ventilator check, and patient equipment competencies are complete and documented., • Maintains proficient knowledge of ventilator patients including compliance software, new technology, units, and supplies supported by Adapthealth., • Ability to demonstrate and instruct on use of vent units and supplies. Ability to make decisions for patients based on compliance data and assessment., • Communicates with team, physicians and referral sources and other patient agencies ensuring prompt attention to patient care issues., • Maintains working knowledge of Medicare/Medicaid and other third-party payer guidelines related to ventilation., • Electronically documents patient care activity, intervention provided and all communication regarding the patient. Documentation is accurate, complete and follows company standards., • Appropriate steps taken to ensure recommendations and orders sent are acknowledged and followed up in a timely manner., • Responsible for accuracy, clarity, and timeliness of verbal and written communications as it relates to role., • Responsible for documentation that supports data collection to track and trend outcomes., • Assists in establishing clinical documentation when needed for third party reimbursement or justification., • Uses knowledge in working with referral sources to educate about best practice standards., • Works collaboratively and pro-actively with peers and other team members to resolve issues and assure optimum outcomes for patients, referral sources and staff., • Acts as a resource on practices and processes to provide appropriate guidance., • Develop and maintain working knowledge of current HME products and services offered by the company., • Maintain patient confidentiality and function within the guidelines of HIPAA., • Completes assigned compliance training and other educational programs as required., • Maintains compliant with AdaptHealth’s Compliance Program., • Experience with ventilator patients, • Competent in Ventilator, Airway Clearance, and Oxygen therapy administration and management, • Able to perform clinical assessments., • Equipment troubleshooting and maintenance skills., • Decision making skills., • Expert communication and interpersonal skills, • Ability to prioritize tasks and manage multiple projects., • Strong analytical and problem-solving skills with attention to detail, • Proficient use of Microsoft Office Suite – Excel, Word, and PowerPoint, • Solid ability to learn new technologies and possess the technical aptitude required to understand flow of data through systems as well as system interaction., • Knowledge of the regulatory requirements at the state, federal, and local level, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Associates degree from an AMA approved respiratory program,, • Valid and unrestricted RT clinical license in all states serviced by the branch., • Must be CPR certified,, • One (1) year of clinical experience as a Health Care RT, HME RT or clinical nursing with Vent experience., • Must be able to lift 50 pounds, stand, bend, stoop, and be able to sit at a computer for extended periods of time., • Must be able to perform one-man CPR., • Ability to perform repetitive movements of the upper extremities’ motions of wrists, hands, and/or fingers due to extensive computer use., • May be exposed to unsanitary conditions in some home settings., • Work environment may be stressful at times, as overall office activities and work levels fluctuate., • May be exposed to high crime areas within the service community., • Subject to long periods of sitting and exposure to computer screen., • May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen., • May be exposed to angry or irate customers or patients., • Must be able to drive and travel as needed., • Physical and mental ability to provide clinical assessments., • Requires travel throughout service area., • Mental ability to communicate both verbally and in writing., • Must be able to access the patient’s residence., • Ability to work outside of normal business hours., • Physical and mental ability to provide clinical assessments. PI858303fa46b1-25405-39751696

Job DescriptionSalary: DOE JOB DESCRIPTION TRANSPORTATION PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionSalary: DOE JOB DESCRIPTION WATER/WASTEWATER/STORMWATER PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionSalary: DOE JOB DESCRIPTION BRIDGE PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS * Pre-employment drug and alcohol screening * Valid Drivers License * Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development The Construction Coordinator provides centralized administrative oversight and compliance management for SERVPRO Construction and insurance-program reconstruction projects from assignment through completion. This role ensures documentation integrity, milestone accuracy, and audit readiness across all program platforms, including XactAnalysis, Contractor Connection-JobTrack, WorkCenter, XactAnalysis estimate approval channels, and DASH construction management software. Working in direct support of the Construction Manager, this position partners closely with Project Managers, Lead Estimator, insurance carriers/adjusters, customers, subcontractors, and internal leadership to maintain strict adherence to SERVPROs quality standards, contractual obligations, program KPIs, regulatory compliance, and customer expectations. Key Responsibilities Program & Project Coordination • Administer all insurance-managed and SERVPRO program reconstruction assignments through XactAnalysis, Contractor Connection-JobTrack, WorkCenter, and DASH., • Perform daily intake review of new assignments, validate data accuracy, confirm scope clarity, and ensure correct project routing and ownership., • Maintain real-time tracking, documentation, and reporting of project status, delays, and milestone completions., • Enter and maintain progress notes in all applicable systems, including schedule updates, material lead times, selection decisions, approvals, and installation timelines., • Identify and document pre-project or active project delays and initiate POMS Exception Requests when required via Contractor Connection., • Coordinate with Project Managers to validate timeline expectations, milestone confirmations, material needs, customer selections, and compliance alignment., • Maintain structured and documented communication with customers, insurance carriers, Contractor Connection, SERVPRO corporate partners, and internal stakeholders to reinforce program expectations and standards. Administrative & Communication Leadership • Serve as the primary administrative point of coordination between field leadership, internal departments, insurance programs, subcontractors, and customers., • Manage all written communication with professionalism, clarity, urgency, and documentation discipline via email and system-logged correspondence., • Support scheduling, material procurement, selections, subcontractor coordination, customer communication, and administrative needs as assigned by Project Managers or the Construction Manager., • Coordinate customer material selections, approvals, and decision timelines to prevent schedule impact., • Initiate purchase orders, subcontractor work orders, and material requisitions as directed, ensuring budget and scope alignment, • Support customer satisfaction and ensure communication timelines align with program standards. File, Data & Audit Governance • Upload, organize, and classify all required project documentation, approvals, photos, and compliance artifacts in DASH and supporting program platforms under proper project folders and categories., • Perform pre-submission file audits to ensure all reconstruction job files meet Servpro corporate and insurance-program audit standards., • Maintain, reconcile, and validate Excel-based tracking logs for assignments, approvals, exceptions, milestone completions, payment timelines, and compliance activity., • Ensure milestone alignment and synchronization across DASH, WorkCenter, and all program platforms to maintain data integrity., • XactAnalysis: Monitor assignments, verify estimate approvals, enter communication notes, update project statuses, and confirm workflow accuracy., • Contractor Connection / JobTrack: Review compliance reporting, update milestones, document delay causation, and track progress indicators., • WorkCenter: Perform self-audits, update job snapshots, ensure milestone accuracy, and maintain consistent timestamps with DASH., • Support subcontractor onboarding, W9/COI compliance, documentation requirements, schedule coordination, and program performance tracking., • Validate vendor compliance documentation, approvals, and schedule commitments to protect program KPIs., • Start each day reviewing Contractor Connection JobTrack Compliance Reports and XactAnalysis dashboards., • Update all active assignments with new progress notes, verified milestones, approvals, and compliance records., • Engage Project Managers for outstanding selections, approvals, milestone confirmations, or file updates., • Maintain audit-ready documentation, logs, approvals, and timestamps at all times., • Perform and document daily estimate approval follow-ups via verbal confirmation and written record., • Ensure estimate approvals are logged daily in DASH and supporting platforms., • Monitor project escalation flags, and documentation gaps, notifying leadership of risks impacting compliance or schedule., • Assist with materials lead-time tracking and proactively coordinate updates to prevent milestone or agreement failure., • Support customer communication to ensure responsiveness aligns with executive-level service expectations and program standards., • Validate subcontractor schedule commitments and insurance compliance documentation to mitigate program KPI impact., • Support change-order documentation and approval tracking as assigned by Project Managers or the Construction Manager., • Assist in department operational improvements including template creation, milestone standards, compliance workflows, and administrative process enhancements. Skills & Competencies • Advanced organizational and administrative discipline with uncompromising attention to detail., • Ability to manage high-volume, multi-system reconstruction assignments in a deadline-driven environment., • Executive-level written and verbal communication skills with a structured, professional, and urgent delivery style., • Proficiency in Microsoft Excel, Outlook, XactAnalysis, Contractor Connection-JobTrack, WorkCenter, and DASH., • Maintain strict compliance with SERVPRO corporate standards and Contractor Connection program requirements., • Ensure all project milestones, documentation, logs, approvals, and communication records are accurate, current, and audit-ready., • Complete daily and weekly compliance reviews and resolve all alerts or documentation gaps promptly., • Demonstrate professionalism, reliability, proactive ownership, and cross-functional collaboration., • High school diploma or GED required; associate or bachelors degree in Business, Construction Management, or related field preferred., • Experience in construction administration, construction coordination, or insurance-managed repair programs strongly preferred., • Familiarity with SERVPRO and insurance-program platforms including XactAnalysis, Contractor Connection, and WorkCenter., • Organized: Maintains structured data, communication, and file discipline., • Detail-Oriented: Ensures accuracy across milestones, compliance, logs, and approvals., • Collaborative: Works effectively across internal teams and external partners., • Dependable: Demonstrates accountability and consistency in execution., • Primarily office-based., • Frequent computer and phone use for documentation, approvals, scheduling, and partner communication., • Ability to sit, stand, or walk for extended periods and lift up to 25 lbs as needed., • Full-time, MondayFriday, 8:00 a.m. 5:00 p.m.

Job DescriptionSalary: DOE JOB DESCRIPTION DEVELOPMENT PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS * Pre-employment drug and alcohol screening * Valid Drivers License * Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionBenefits: • No degree/sales background needed. We offer paid self-paced training, • Company lunches and employee recognition, • Direct career track with increases and promotions, • Casual dress code, Stretch Zone apparel, • Employee referral cash reward, • Commission available on top of base pay, • Base pay with increases depending on performance, • Commission Welcome to Stretch Zone. At Stretch Zone, we believe that nothing is more important than your own health. As a Sales Associate at Stretch Zone, your primary job is to help people realize their own goals through our unique membership model of practitioner assisted stretch. Responsibilities • Drive membership sales to each guest who comes into Stretch Zone., • Provide excellent customer service by greeting everyone who comes through the door with a smile, scheduling all appointments, answering the phone, and addressing any member concerns., • Own member retention by following the daily operation guides, excellent customer service, and consistent follow-ups., • Promote the value behind practitioner-assisted stretching by hitting all sales goals, encouraging add-on sessions, and actively working to improve your sales skills., • Protect the culture of Stretch Zone by building a positive and professional relationship with all members and team members.Qualifications, • Strong communication skills and a passion for helping others., • No degree or sales experience is required. We offer in-depth training and support., • Willingness to learn new skills.About Stretch Zone, • Our patented equipment and practitioner-assisted stretch method are designed to improve mobility, reduce stiffness, and increase athletic performance., • Step 1: Initial phone call and one-question assessment within 24 hours., • Step 2: In-person interview within 48 hours., • Step 3: Offer letter and team lunch within 7 days.We welcome candidates from all backgrounds to apply!

Job Description Job Title: Customer Service Representative (CSR) Plumbing Location: Springfield, MO /NON - Remote (In Person Only) Website: Employment Type: Full-Time Company Values: Faith, Family, Integrity & Excellence Schedule: Monday – Friday 8am-5pm, as well as 1 week per month on-call rotation Wage: $15 to $18 plus weekly bonus opportunity Job Summary We are seeking a reliable and detail-oriented Customer Service Representative to serve as the first point of contact for our plumbing customers. The ideal candidate will have excellent communication skills, strong typing and computer abilities, and the ability to manage a high volume of calls while accurately entering and updating information in our service management software. Experience with ServiceTitan is highly preferred. Key Responsibilities • Answer incoming calls promptly and professionally, • Schedule, reschedule, and confirm service appointments, • Accurately enter customer information, job details, and notes into the computer system, • Dispatch and coordinate technicians as needed, • Communicate clearly with customers regarding services, arrival times, and follow-ups, • Process invoices, payments, and service documentation as required, • Maintain organized and accurate customer records, • Handle customer inquiries, concerns, and complaints with professionalism and empathy, • Support office and management staff with administrative tasks as needed, • Work collaboratively with dispatcher and Service Manager, • Submit for permits, inspections and underground locates, • Covering on-call phones in rotation with other employees for after-hour calls Required Qualifications • Strong typing skills with high accuracy, 40 wpm required, • Dependable transportation and ability to work, • Solid computer skills, including experience with CRM or scheduling software, • Excellent verbal and written communication skills, • Strong attention to detail and organizational skills, • Ability to multitask in a fast-paced environment, • Dependable, punctual, and professional demeanor, • Experience using ServiceTitan software, • Previous experience in a plumbing, HVAC, or home services company, • Competitive pay based on experience and performance, • Benefits: health insurance, paid time off, bonuses, etc., • Supportive team environment, • Opportunities for growth and advancement

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are currently seeking a Traveling Lead Foreman to oversee and execute heavy commercial electrical projects across various industrial sites. While the job environments are industrial, the scopes of work typically involve straightforward but time-sensitive tasks. This role is ideal for a motivated leader who thrives under pressure, works well with a team, and takes initiative to solve problems and drive results. Key Responsibilities • Lead a minimum crew of 4 (typically 2 licensed electricians and 2 apprentices) on each job site, • Manage project timelines, labor, and site coordination under strict deadlines, • Read and interpret blueprints, one-lines, and electrical schematics, • Execute and oversee a range of electrical work including:, • Conduit and wiring installations, • Generator and UPS system installations, • Low- and medium-voltage systems, • Maintain daily communication with project managers and office staff, • Ensure strict compliance with safety standards and project specifications, • Provide clear and professional verbal and written communicationIdeal Candidate, • Proven experience leading larger-scale commercial or industrial electrical projects, • Strong problem-solving skills and the ability to make quick decisions in the field, • Desire and ability to work up to 60 hours per week, • Willingness to travel extensively; travel is a key requirement for this role, • Ability to work independently and lead a team with minimal supervision, • High level of accountability, reliability, and professionalismQualifications, • Journeyman Electrician License is a MUST, • 5+ years of field experience in electrical construction, • Prior leadership or foreman experience is strongly preferred, • Strong working knowledge of electrical codes, installation practices, and jobsite safety, • Proficiency with blueprint and schematic reading

Job DescriptionSalary: DOE JOB DESCRIPTION Transportation Project Manager As a Transportation Project Manager, you will play a pivotal role in providing project management, design and analytical civil engineering expertise for a wide range of Transportation and other civil infrastructure projects. Your primary responsibility will be to manage and design projects in compliance with applicable processes, codes and standards, while meeting customer specifications. This will require your ability to produce, review, or manage the production of design and construction documents for projects, from conceptualization to final construction. You will be an integral part of feasibility studies, designs, and reports, and you will be responsible for preparing, implementing, and assessing contract documents. In addition, you will lead design teams throughout all phases of the project, from bidding to completion, utilizing your leadership skills and technical knowledge to deliver high-quality results. SUMMARY Under general supervision of a Team Leader, a Transportation Project Manager is responsible for project management and engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Serve as Project Manager, Project Engineer, and Client contact on projects., • Participate in Business Development activities., • Sign and seal engineering work performed by you or that is performed under your direct supervision., • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Hold a Professional Engineering License in the State of Missouri, or obtain one within six months of employment. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS/LICENSING • Professional Engineering License in states as required for projects, • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionDescription: Position Summary The Production Manager is responsible for overseeing all aspects of project production for roofing, siding, gutter, and related exterior jobs. This role combines administrative coordination, material ordering, crew management, and on-site supervision to ensure projects are completed safely, on schedule, within budget, and to company quality standards. Requirements: Key Responsibilities Project & Job Oversight • Manage residential and/or commercial roofing, siding, and gutter projects from start to finish, • Schedule jobs and coordinate crews, subcontractors, and inspections, • Oversee multiple active projects simultaneously, • Ensure jobs are completed according to contract scope, building codes, and manufacturer specifications On-Site Management • Visit job sites regularly to monitor progress, quality, and safety, • Act as the primary point of contact between crews, subcontractors, and the office, • Troubleshoot issues in the field and resolve delays or installation concerns, • Conduct job start-ups, progress checks, and final walkthroughs Materials & Ordering • Order roofing, siding, gutter, and related materials accurately and on time, • Coordinate material deliveries to job sites or warehouse, • Track material usage and minimize waste, • Communicate with suppliers regarding availability, lead times, and pricing Administrative & Office Duties • Create and manage job files, production schedules, and documentation, • Update job statuses, notes, and completion records in company systems, • Coordinate permits, inspections, and warranties as needed, • Assist with invoicing, change orders, and close-out paperwork Quality Control & Safety • Ensure workmanship meets company and manufacturer standards, • Enforce safety policies and OSHA compliance on all job sites, • Address and resolve punch-list items and warranty issues Communication & Customer Support • Communicate timelines and expectations with homeowners, builders, or project managers, • Address customer concerns related to production or installation, • Work closely with sales, estimating, and office staff to ensure smooth job flow Qualifications • Experience in roofing, siding, gutters, or exterior construction required, • Strong knowledge of installation processes and materials, • Ability to manage crews and subcontractors effectively, • Excellent organizational and time-management skills, • Comfortable with both office work and hands-on site visits, • Strong communication and problem-solving abilities, • Valid driver’s license and reliable transportation

Job DescriptionSalary: DOE JOB DESCRIPTION Development Project Manager As a Development Project Manager, you will play a pivotal role in providing project management, design, and analytical civil engineering expertise for a wide range of Development and other civil infrastructure projects. Your primary responsibility will be to manage and design projects in compliance with applicable processes, codes and standards, while meeting customer specifications. This will require your ability to produce, review, or manage the production of design and construction documents for projects, from conceptualization to final construction. You will be an integral part of feasibility studies, designs, and reports, and you will be responsible for preparing, implementing, and assessing contract documents. In addition, you will lead design teams throughout all phases of the project, from bidding to completion, utilizing your leadership skills and technical knowledge to deliver high-quality results. SUMMARY Under general supervision of a Team Leader, a Development Project Manager is responsible for project management and engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Serve as Project Manager, Project Engineer, and Client contact on projects., • Participate in Business Development activities., • Sign and seal engineering work performed by you or that is performed under your direct supervision., • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Hold a Professional Engineering License in the State of Missouri, or obtain one within six months of employment. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS/LICENSING • Professional Engineering License in states as required for projects, • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionSalary: DOE JOB DESCRIPTION Bridge Project Manager As a Bridge Project Manager, you will play a pivotal role in providing project management, design and analyticalcivil-structural engineering expertise for a wide range of bridge and other civil infrastructure projects. Your primary responsibility will be to manage and design projects in compliance with applicable processes, codes and standards, while meeting customer specifications. This will require your ability to produce, review, or manage the production of design and construction documents for projects, from conceptualization to final construction. You will be an integral part of feasibility studies, designs, and reports, and you will be responsible for preparing, implementing, and assessing contract documents. In addition, you will lead design teams throughout all phases of the project, from bidding to completion, utilizing your leadership skills and technical knowledge to deliver high-quality results. SUMMARY Under general supervision of a Team Leader, a Bridge Project Manager is responsible for project management and engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Serve as Project Manager, Project Engineer, and Client contact on projects., • Participate in Business Development activities., • Sign and seal engineering work performed by you or that is performed under your direct supervision., • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Hold a Professional Engineering License in the State of Missouri, or obtain one within six months of employment. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS/LICENSING • Professional Engineering License in states as required for projects, • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS * Pre-employment drug and alcohol screening * Valid Drivers License * Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionSalary: Starting $16-$18 Hourly DOE -Provide excellent customer service to each and every customer with whom you come in contact. -Ability to identify equipment's purpose and provide relative information in helping to ensure the customer has rented the proper equipment for their project. -Knowledge of routine maintenance and basic trouble-shooting requirements of all rental equipment. -Ensure all needed accessories are included, loaded and added to the rental contract prior to leaving the branch. -Load/Unload equipment for customers using care to avoid any damage to vehicle or equipment. -Properly secure every load, every time per company guidelines . -Check equipment in upon return. -Clean equipment after each rental. Follow service procedures for each item. Thoroughly test equipment for proper operation. Return equipment to the appropriate rental ready line. -At management's direction be available to make deliveries and pick-ups of equipment. -Must have knowledge of company policies and all department procedures and follow them at all times. -Keep work area clean and orderly, with daily cleaning of the yard, wash rack, front bench, rental storage areas, and drive thru. -Be able to perform duties with minimal supervision. always maintaining a strong work ethic. -Be responsible. -Attendance is especially important. Deviations from assigned schedule must be approved in advance by the Branch Manager. PHYSICAL REQUIREMENTS: -Ability to stand, stoop, bend, and kneel for prolonged periods of time and climb stairs and ladders. -Ability to lift a minimum of 50 pounds above shoulder level without assistance and push and pull heavy loads 50 pound minimum. -Valid drivers license required. -High school education or equivalent industry experience required. Superior Rents is an equal opportunity employer and employer decisions are based on business needs, job requirements, and individual qualifications, without regard to race, color, sex, sexual orientation, age, religion, or creed, disability, national origin, or any other protected status. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Job Type: Full-time Benefits: • 401(k), • 401(k) Matching, • Employee Discount, • Health Insurance, • 8 Hour Shift, • Day shift, • Monday to Friday, • Overtime, • Weekends (Seasonal Saturdays)

Job Description POSITION SUMMARY: Reporting to the Production Supervisor, this position will perform the assembling of major components, and will perform minor machine set-ups, general maintenance, and area housekeeping. This position will require decisions determining the quality of the products and services being offered. Physical effort requirements consist of regular lifting, pushing and pulling material. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Assemble major components using various machines and tools., • Solder materials (if assembling on the Starter side of production), • Participate in and support the principles of Open Book Management and recognize the responsibilities of being an owner of the company., • Required to follow safety standards. Required to wear all personal protective equipment in designated areas., • Perform set-up, material handling duties, and minor general maintenance., • Participate in the processes of continuous improvement., • Operator is responsible for all area housekeeping., • Ability to effectively perform similar positions on the floor at any point in time., • Promote a positive working environment in order to achieve the organization’s goals. Rewards for you: • Exceptional health benefits, • Vacation & Holiday Pay, • 5% 401(k) Match, • 100% Employee Owned, • Training and Advancement Opportunities, • 100% Tuition Reimbursement, • Quarterly Bonus Program, • Outstanding Company Culture How we do it: Through a culture of ownership! We’re committed to creating a business of business-people through teaching Financial Literacy and playing The Great Game of Business. Our company is 100% Employee Owned and associates share in the wealth they help create. SRC Technologies Group, a subsidiary of SRC Holdings Corporation (SRC), is headquartered in Springfield, Missouri. SRC was founded in 1983 by Jack Stack, renowned author, lecturer, and CEO who created the business literacy and open book management program “The Great Game of Business”. Click here to find out more about The Great Game of Business Location: 2401 E. Sunshine St. Springfield, MO 65804

Job Description Job Title: Outside Sales Representative Position Details: JM Hunter Group is looking to fill a position as an Outside Sales Representative with experience in building materials. The ideal candidate must demonstrate strong customer service skills by maintaining existing and new customer relationships. Communication is a large part of the position, the candidate must posses excellent verbal and written communication skills as well as strong math and computer skills. Why Choose Us? • Career Growth: This company is recognized as a leading wholesale distributor in the nation spanning markets in the Midwest, the South, and Southeastern regions and continuously growing., • Supportive Environment: Be a part of a team that values collaboration and provides ongoing training and support., • Competitive Compensation: Enjoy a competitive salary with performance-based incentives. Great benefit packages include insurance, 401k Savings Plan, PTO and paid holidays., • Work-Life Balance: Most roles at are from 7am – 5pm which provide a healthy work-life balance. Education: • High School diploma or equivalent Experience: • Minimum 5+ years with proven track record in outside sales, preferably within building material distribution., • Demonstrated success in prospecting new accounts and exceeding sales goals., • Experience in excellent customer service and maintaining relationships with clients and vendors. Job Duties: (Including but not limited to) • Prospecting and Lead Generation: Identify and pursue new business opportunities through cold calling, lead generation, and networking., • Sales: Develop and execute strategies to meet and exceed sales targets. Negotiate terms, pricing, and contracts with clients., • Customer Service: Provide exceptional service to existing customers, addressing their needs and ensuring satisfaction., • Product Knowledge: Maintain a deep understanding of the company’s products and services. Advise customers on the range of products and services offered tailoring solutions to meet their specific needs. Conduct market research on competitor activities and trends in the industry., • Relationship Management: Maintain and nurture existing relationships with vendors to ensure a smooth supply chain and service delivery. This includes regular follow-ups with clients and problem-solving skills. Required Skills: • Strong sales acumen and the ability to drive results., • Excellent communication and interpersonal skills., • Proficiency in a CRM software and other sales tools., • Ability to work independently and manage time effectively., • Problem-solving skills and a customer-centric approach. Job Salary and Benefits: • Salary: Competitive base salary with performance-based bonuses and commissions., • Benefits: Comprehensive benefits package including health, HRA, dental, vision, life, and optional voluntary life and AD&D insurance, 401(k) plan with 3% company match, paid time off, and other perks.

Job Description POSITION SUMMARY: Reporting to the Production Supervisor, this position will perform the Disassembly, Reclaim and Assembly of major components, and will perform minor machine set-ups, general maintenance, and area housekeeping. This position will require decisions determining the quality of the products and services being offered. Physical effort requirements consist of regular lifting, pushing and pulling material. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Disassemble major components using various machines and tools., • Reclaim parts as required by the work instructions and processes., • Assemble major components using various machines and tools., • Solder material as needed., • Participate in and support the principles of Open Book Management and recognize the responsibilities of being an owner of the company., • Required to follow safety standards. Required to wear all personal protective equipment in designated areas., • Work attendance must be exemplary., • Perform set-up, material handling duties, and minor general maintenance., • Participate in the processes of continuous improvement., • Operator is responsible for all area housekeeping., • Ability to effectively perform similar positions on the floor at any point in time., • Promote a positive working environment in order to achieve the organization’s goals. Rewards for you: • Exceptional health benefits, • Vacation & Holiday Pay, • 5% 401(k) Match, • 100% Employee Owned, • Training and Advancement Opportunities, • 100% Tuition Reimbursement, • Quarterly Bonus Program, • Outstanding Company Culture How we do it: Through a culture of ownership! We’re committed to creating a business of business-people through teaching Financial Literacy and playing The Great Game of Business. Our company is 100% Employee Owned and associates share in the wealth they help create. SRC Technologies Group, a subsidiary of SRC Holdings Corporation (SRC), is headquartered in Springfield, Missouri. SRC was founded in 1983 by Jack Stack, renowned author, lecturer, and CEO who created the business literacy and open book management program “The Great Game of Business”. Click here to find out more about The Great Game of Business Location: 2401 E. Sunshine St. Springfield, MO 65804

Job Description:** Position Overview: UPS is seeking reliable and customer-focused individuals to join our team as Seasonal Package Delivery Drivers. Route Management: Plan and manage your route effectively to ensure timely deliveries and pickups. How to Apply: Apply online via the UPS

The Retail Sales Associate delivers world-class customer service to all retail customers by receiving and processing packages for courier shipment and operating copiers, fax machines, binding equipment, laminating machines, and point-of-sale devices. The ideal candidate has previous retail sales exp

No experience requited, hiring immediately, appy now.Find out what you’ll become as a Package Handler at UPS.In this fast-paced warehouse job, you’ll lift, lower and slide packages up to 70 lbs.You’ll typically work 3 ½ - 4 hour shifts, approximately 17 ½ - 20 hours per week in a part-time o

Job Description**: As a Package Handler at UPS, you will be responsible for the physical loading, unloading, and sorting of packages of varying sizes and weights by hand.

Why would you want to be a Package Handler with UPS? How about: No Experience Required; Work on your schedule as Part-Time, Full-Time and Seasonal; Generous Weekly Pay; Shifts available 24/7; Medical Dental & Vision; Get hired online in 30 minutes or less! So the question is, why wouldn't you want t

UPS is hiring individuals to work as Administrative Assistants.In this role you will: Manage busy calendar and heavy phones, keep call sheet, schedule meetings, make travel arrangements, and prepare itineraries; Prepare and track expense reports; Aid in preparing & proofreading presentations; Handle

UPS is hiring individuals to work as Customer Service Associates to fill Part-Time, Full-Time and seasonal positions. So c'mon, take the next step on your career journey as a Customer Service Associate at UPS!. This work involves contact with customers who are shipping packages.

Why would you want to be a Dock Worker with UPS? How about: No Experience Required; Work on your schedule as Part-Time, Full-Time and Seasonal; Generous Weekly Pay; Shifts available 24/7; Medical Dental & Vision; Get hired online in 30 minutes or less! So the question is, why wouldn't you want to be