Day shift jobs in SheffieldCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

As a Chef at Chopstix, you’ll be responsible for preparing high-quality dishes while maintaining excellent hygiene and safety standards. Working in an open kitchen, you’ll engage with customers while ensuring consistency in food preparation. If you’re passionate about food and thrive in a fast-paced kitchen environment, this is the role for you. Working alongside a fantastic team, we will support you every step of the way to ensure you gain the skills and confidence to truly get stuck in. Looking for progression? We have bags of opportunities to develop within our restaurant teams and across the wider Butlin’s business. We are looking for candidates who are energetic and enthusiastic, high spirited and fun loving and who will understand their role and the value they can add to the guest and the team experience. We think our chefs at Butlin’s are something special and we know our guests love to keep returning to our restaurants as part of their holiday experience. Please Note: This is a full time role of 35 hours covering a 5-day working week over 7 days, so flexibility is very important with a range of shift patterns, including working till early hours of the morning. At Butlin’s, we’re all about fun, excitement, and adventure by the bucketload! For 90 years we’ve been delighting hundreds of thousands of guests each year, whether on a non-stop action family break or our epic Adult only Big Weekenders. Ask any of our team, past and present, and one of the best things they’ll say about working at Butlin’s is our culture! We’re all about providing our guests with an Altogether More Entertaining and Fun Break, brought to life through our three mighty values. So, if you want a role where you Create Smiles, where you aren’t afraid to Get Stuck In and where the team genuinely Cares For Each Other – this could be the perfect fit for you. There has never been a more exciting time to join Butlin’s!

About the role We’re looking for a Junior Kitchen Manager to join the Butlin's Buffets Department based in Skegness. Reporting to the Kitchen Manager, you will support the running of the kitchen and support in leading a large team of amazing chefs. As well a stepping up in the Kitchen Managers absence. You will be passionate about exceptional experience and will monitor this regularly to develop action plans in your venue with a focus on continuous improvement. Have great leadership skills to support and grow your team, with daily briefings, handle stock controlling and review the presentation of food. Financial performance will play an important part in your role, and you will deliver food cost budgets through effective menu planning, cooking to standards and specification. You will also support in the accountability of food hygiene standards and health and safety, inline with legislation and company policies. You will be a role model for the Butlin’s unique way of working, ensuring training schedules and performance development plans are in place for your team and inspiring them to deliver a great experience to guests every time. We truly believe that variety is the spice of life and in this role you’ll have the opportunity to lead and develop the skills of a team in our main buffet restaurant serving our guests who have booked a half-board dining package. We are looking for individuals with experience in a similar level role with large volume turn around. We can host for 3000 guests per service within our buffet department. So being able to work in a fast paced environment is a must, with good time management and organisational skills. You will need to be hard working and determined, a reliable person who likes to get things done and who will look for better ways for the team to consistently deliver our brand standards. We are looking for candidates who are energetic and enthusiastic, high spirited and fun loving and who will understand their role and the value they can add to the guest experience by unleashing the potential of the team, by being able to build and develop relationships with leaders and team on resort. You must have passed your Level 3 Food Safety qualification and be confident in leading a team to continually deliver high standards in a fast paced and busy kitchen environment. As with any chef role at this level, you will also be responsible for managing margins and controlling costs and all things health, safety and hygiene related. We think our chefs at Butlin’s are something special and we know our guests love to keep returning to our restaurants as part of their holiday experience so the cherry on the top for the successful candidate is for them to be fun, keen to join in and work as part of a team, and is interested in ensuring our guests have a great time, every time. This role covers a 5-day working week over 7 days covering 40 hours Shift time from: 6am - 12:00 This role does not come with onsite accommodation. We are looking for cleaning team members that can provide that extra bit of sparkle to our guest's holidays by helping to keep our resort clean, tidy and pristine. If you think you can go the extra mile for our team and our guests, we'd love to welcome you to the team. We are looking for candidates who: -Can clean of our main venues and toilets which will include the use of electrical and mechanical cleaning equipment (full training will be given) -Handle chemicals to clean venues (full training will be given) -External road cleaning including emptying general waste bins and recycling bins -Movement of furniture to allow for different activities within venues -Cleaning and disinfecting of toilets and changing rooms Normal working hours: Evening shift - 5pm - 2am. Please note that due to lone working and hours required for the role, applicants will need to be over 18 to apply. Start and finish times may vary depending on the break type. If you think you have what it takes to come and be part of our team, we’d love to hear from you. At Butlin’s, we’re all about fun, excitement, and adventure by the bucketload! For 90 years we’ve been delighting hundreds of thousands of guests each year, whether on a non-stop action family break or our epic Adult only Big Weekenders. Ask any of our team, past and present, and one of the best things they’ll say about working at Butlin’s is our culture! We’re all about providing our guests with an Altogether More Entertaining and Fun Break, brought to life through our three mighty values. So, if you want a role where you Create Smiles, where you aren’t afraid to Get Stuck In and where the team genuinely Cares For Each Other – this could be the perfect fit for you. There has never been a more exciting time to join Butlin’s!

Job Title: Engineering Maintenance Technician Type: Full-Time, Permanent Location: Sheffield, South Yorkshire Ref. No: 1032 Salary: £40,509 per annum Shifts: 12-hour day & night shifts, (Suez Shift Pattern) Please note you must have full and legal rights to work in the UK or Ireland. (We cannot sponsor or support VISA applicants). About the Engineering Maintenance Technician Role: We are recruiting for a... ZIPC1_UKTJ

Are you a fully qualified HGV Fitter, HGV Mechanic, HGV Technician living in the Sheffield area looking for a Mobile Service role? \nMonday to Friday role. Day shifts \nSalary - £40,000 - £45,000 \n \nThe role of the Mobile Service Engineer: \nYou will be travelling within a designated area and have use of a fully equipped van. You will be working on a variety of specialised vehicles which could include cargo and ground support equipment, industrial type tractors and tugs/ shunters. It could also involve working at airports, sea ports, main dealers, manufacturing sites or military installations. \n \nWe are looking for a self-motivated and independent HGV Fitter, Mechanic, Technician who can travel to our clients various workshops in a designated area conducting: \n- Preventative Maintenance \n- Emergency Breakdowns \n- Pre-arranged servicing at rural sites \n- Engine work and diagnostic investigations \n- Hydraulics and pneumatics? \n- Electrical and wiring inspections and corrections? \n \nRequirements for this Mobile Service Engineer position: \nIdeally you will be fully qualified (City & Guilds), NVQ or equivalent. \nAdditional accreditations such as IRTEC or an EV qualification would be desirable, as would an HGV Class 1 or Class 2 licence but not essential. \n \nKautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK.\n\nMobile Service Engineer \nLocation: Sheffield and surrounding areas \nDay shift: Monday to Friday \n48 hours per week, \nPermanent, full time position \n \nSo, what are you waiting for. Get in touch for further details and start that next journey on your career, we're just a click away, apply with your CV

Job Title: Maintenance Engineer Type: Full-Time, Permanent Location: Sheffield, South Yorkshire Ref. No: 1028 Salary: £52,719 per annum Shifts: 12-hour day & night shifts, (Suez Shift Pattern) Please note you must have full and legal rights to work in the UK or Ireland. (We cannot sponsor or support VISA applicants). About the Role Our client, a global leader in automated logistics solutions, is seeking s... ZIPC1_UKTJ

Taskmaster Resources LTD are recruiting experienced Warehouse Operative to work for our client based in the Sheffield.Join a friendly warehouse team with competitive day-shift hours and excellent pay. Pay: £13.31ph Hours: Monday to Thursday 8:15am-16.45pm and Friday 8:15am-14.15pm Experience & Skills: Forklift trained. (Counterbalance & pivot steer trained are a must) Job Description: To contribute to ... ZIPC1_UKTJ

Welding Inspector (Weekend Shift, 3 Day Week – PCN Level 2) Location: Rotherham Salary: £17.51 per hour (circa £31,412.94 per annum based on 34.5 hours) Contract: Full-time, permanent Hours: Friday to Sunday, 6:00am to 6:00pm Most people still work five days. This role doesn't. You work Friday to Sunday, then you're off for four full days before starting again. If you're used to a full working wee... ZIPC1_UKTJ

CNC Turner Sheffield Shift Patters / Working Hours: Days (38 hours): Monday - Thursday: 7:15am - 16:00pm & Fridays 7:15am - 12:15pm. Nights (40 hours): Monday - Wednesday: 18:00pm - 6:00am & Thursdays 16:00pm - 20:00pm Night working hours are paid at a premium of x1.5 (£23.37). day/nights are alternate each week General Summary of Role: The role will be responsible for machining sensitive aerospace com... ZIPC1_UKTJ

MIG Welder / Fabricator (Weekend Shift) Location: Rotherham (S60) Salary: £23.50 per hour plus overtime and profit share Contract: Full-time, permanent Shifts: Friday to Sunday, 6:00am to 6:00pm (3-day week) Three days worked. Four days off every single week. That's the setup here. You get your hours done Friday to Sunday, then you're off until the following week. It's still a welding and fabrica... ZIPC1_UKTJ

Taskmaster Resources LTD are recruiting experienced Warehouse Operative to work for our client based in the Sheffield. Join a friendly warehouse team with competitive day-shift hours and excellent pay. Pay: £13.31ph Hours: Monday to Thursday 8:15am-16.45pm and Friday 8:15am-14.15pm Experience & Skills: Forklift trained. (Counterbalance & pivot steer trained are a must) Job Description: To contribute to all aspects of internal logistics (goods in & goods out) of the company and all other jobs that are important for smooth and efficient warehouse operation. The role also includes stock replenishment and stock movement duties whilst ensuring that all warehouse spaces are kept clean & tidy and free from obstructions that may cause health and safety issues. Main Duties: ·To pick sales orders accurately and in timely manner ·To check and pack sales orders accurately and in timely manner ·To label packages and pallet deliveries correctly for transport out to customers ·To replenish picking bays with stock accurately and in timely manner ·To transport stock using forklift truck as required ·To unload and sort incoming goods ·To load outgoing delivery vehicles ·To move stock or deliver orders in company vehicle ·To maintain health & safety guidelines within the warehouse area ·Provide necessary information to keep Sage system up to date / keep Sage system up to date ·All other jobs that are required to make sure the internal logistics are operating smoothly ·Any other duties as agreed with the Warehouse Team Leader. Please apply today by sending your CV.

Work Strata are delighted to be hiring selectors for its client's fantastic supermarket distribution centre in South Yorkshire.As a Selector your daily responsibilities will include picking stock ready for distribution to stores, loading delivery trays and vehicles, adhering to health and safety and quality inspecting products and reporting any defects to manager.Benefits: • Weekly pay (Competitive rates), • Long term opportunities with a leading employer, • Inhouse benefits including pension and life assurance scheme, • Excellent career progression opportunities, • Free onsite parking, • Paid breaks, • Generous annual leave allowancePay Rate:£14.58 per hourShifts: Day shift full time only 7am – 3pm or 8am-4pm or 11am – 7pm

Temp to Perm HGV Class 1 (C+E) Driver – Sheffield S9 | Temp to Perm | Join a leading transport company offering immediate starts, competitive pay rates and flexible shift patterns for experienced HGV drivers . Taskmaster Resources LTD are urgently looking for HGV Class 1 day and night drivers to work for our client based in Sheffield. Various shift patterns are available. The client is looking for Temp 2 Perm drivers Driver induction to be completed - 1-3 days (paid) Due to insurance purposes, we require you to have held your licence for a minimum of 9 months and have been driving within that time and be able to prove this to the client. Start times will vary for days and nights, and the client will advise these directly. Shifts will vary between 8 - 10 hours could be more depending on the run. Pay: • Days - Mon - Fri £16 ph, • Nights Mon - Fri £17 ph, • Sat - £18ph, • Sun £19ph Requirements: • Hold a valid Category C+E (Class 1) HGV/ LGV entitlement, • Minimum of 9 months of class 1 experience, • Hold a valid Digital Tachograph Card (Digi Card), • Have no more than 6 points on your licence; DR DD IN endorsements are NOT accepted, • Hold a full CPC, • Be polite and pleasant Benefits: • Immediate starts, • Weekly pay, • Free PPE, • Holiday pay accrual at 12.07% per hour, • Weekend work & extra shifts available Shift patterns available: • AM or PM Taskmaster Resources LTD. are acting as an Employment Business in relation to this vacancy. Job Types: Full-time, Temp to perm Benefits: Company pension Free parking On-site parking Work Location: On the road

Operations / Processing Manager £35,000 - £40,000 DOE | South Yorkshire | Full Time | Permanent | Day Shift Hands-On Leadership Role in Fast-Growing ITAD Business We're working with a rapidly growing business within the IT Asset Disposition (ITAD) and electronics refurbishment sector, looking for a hands-on Operations / Processing Manager to lead a busy, high-volume processing facility. This is a re... ZIPC1_UKTJ

Job Title: Maintenance Engineer Type: Full-Time, Permanent Location: Sheffield, South Yorkshire Ref. No: 10281 Salary: £52,719 per annum Shifts: 12-hour day & night shifts, (Suez Shift Pattern) Please note you must have full and legal rights to work in the UK or Ireland. (We cannot sponsor or support VISA applicants). About the Role Our client, a global leader in automated logistics solutions, is seeking skilled Maintenance Engineers to join their resident team in Sheffield. This is a hands-on, technically demanding role focused on maintaining high availability of automated warehouse systems through both preventive and corrective maintenance. Key Responsibilities • Deliver preventive and corrective maintenance to the highest standards, meeting KPIs and customer expectations., • Troubleshoot issues within your discipline (electrical, mechanical, or multi-skilled)., • Support the Shift Manager, including deputising in their absence., • Coach and mentor technicians on equipment operation and maintenance., • Conduct technical audits and ensure accurate spare parts management. Skills & Experience • Experience with conveyors, sorters, cranes, hanging garment systems, robotics, or similar., • Knowledge of PLC/control systems, WCS/WMS, SCADA, and CMMS/PPM systems., • Self-motivated, results-focused, and capable of motivating others., • Excellent communication and relationship-building skills. Qualifications • ONC/HNC or B–Tech in Electrical/Electronic or Mechanical Engineering, or NVQ Level 3+. About Us: Wills Consultants is an independent recruitment consultancy specialising in engineering, finance and office professionals. Wills Consultants has an extensive client base that ranges from the thriving SME sector through to national and international PLCs and actively support the Armed Forces Covenant.

Toolmaker - Sheffield - Days Only We are recruiting on behalf of our client for an experienced Toolmaker to join a well-established engineering business based in Sheffield. This is an excellent opportunity for a skilled and motivated individual looking for a permanent day-shift role within a precision manufacturing environment. The Role The successful candidate will be involved in the manufacture, ma... ZIPC1_UKTJ

DVC Sports Duty Officer • Salary: £25,456 per annum, • Location: Dearne Valley College, • Contract Type: Full Time Perm Join our team as a DVC Sports Duty Officer, where you will be pivotal in managing the day-to-day operations of our sports facilities. This role is ideal for someone with a passion for sports and a commitment to excellent customer service, ensuring health and safety compliance, and efficient facility operations. Day-to-day of the role: • Oversee the daily operation of sports facilities during allocated shifts., • Ensure adherence to all health and safety procedures and policies., • Supervise staff, including allocation of duties and monitoring performance., • Provide first-rate customer service and act as the first point of contact for facility users., • Handle customer queries, issues, and complaints professionally., • Conduct regular facility checks to ensure cleanliness, safety, and functionality., • Support the setup and delivery of sports activities, events, and bookings., • Maintain accurate records, including incident and accident reports., • Manage the safe storage, maintenance, and readiness of all equipment., • Assist with opening and closing procedures, ensuring the security of the premises. Required Skills & Qualifications: • Proven experience in a sports, leisure, or customer-facing environment., • Strong understanding of health and safety practices., • Excellent communication and interpersonal skills., • Ability to work both independently and as part of a team., • Flexible approach to working hours, including availability for evenings and weekends. Desirable: • First Aid qualification., • National Pool Lifeguard Qualification (NPLQ) or equivalent., • Experience in supervising staff or managing a facility. Skills and Competencies: • Strong organisational and problem-solving skills., • Ability to remain calm under pressure., • High level of customer focus., • Meticulous attention to detail and commitment to maintaining standards. Additional Information: • The role may involve shift work, including evenings and weekends., • Opportunities for training and development may be provided., • Candidates may be required to undergo relevant background checks.

CNC Turner Location: Sheffield Job Type: Full-Time, Permanent Salary: Competitive (dependent on experience) Hours: Monday to Friday, Day Shift (early finish on Friday) About the Company A well-established precision engineering business based in Sheffield, specialising in high-quality machined components for industries such as aerospace, automotive, and general engineering. Our focus is on delivering exceptional quality, innovation, and customer satisfaction. Role Overview We are seeking an experienced CNC Turner to join our team. The successful candidate will be responsible for setting, operating, and programming CNC lathes to produce precision components to tight tolerances. Key Responsibilities • Set and operate CNC turning machines (Fanuc or similar controls), • Read and interpret engineering drawings and specifications, • Program CNC machines using G-code or conversational programming, • Perform quality checks using micrometers, verniers, and gauges, • Maintain machinery and adhere to safe working practices, • Work to production schedules and meet deadlines, • Collaborate with engineering and production teams to improve processes Requirements • Proven experience as a CNC Turner in a precision engineering environment, • Ability to read and understand technical drawings, • Strong knowledge of machining principles and tooling, • Experience with Fanuc or similar CNC controls, • Excellent attention to detail and commitment to quality, • Ability to work independently and as part of a team, • Apprenticeship or relevant engineering qualification (preferred) Benefits • Competitive salary based on experience, • Overtime available, • Company pension scheme, • 28 days holiday including bank holidays, • Supportive working environment with opportunities for progression

Quality Assurance Inspector – Precision Engineering Location: Sheffield Shift Pattern: Days Ready to make an impact in quality assurance? Apply today and help drive excellence in precision manufacturing. A well-established precision engineering company is seeking a Quality Assurance Inspector to join its quality team. This is a key role ensuring that high-spec components meet strict customer and industry standards, with a focus on both manual and CMM inspection techniques. About the Role You’ll be responsible for inspecting components using both manual tools and coordinate measuring machines (CMM), ensuring compliance with customer drawings and specifications. The role also involves supporting calibration activities, documenting inspection results, and contributing to continuous improvement initiatives. Key Responsibilities • Perform manual and CMM inspection of components to customer specifications., • Conduct goods-inward inspections and first-off checks., • Support calibration of measuring equipment., • Document inspection results for FAIR and PPAP submissions., • Generate quality control notifications for non-conforming products., • Participate in 8D problem-solving and improvement activities., • Assist with day-to-day quality tasks under the guidance of the Quality Manager., • Ensure all work aligns with the company’s drive for zero defects and continuous improvement. What We’re Looking For • Previous experience in quality inspection., • Proficient in English (written and verbal)., • Skilled in using CMM equipment., • Strong attention to detail and accuracy., • Good planning and organisational skills., • Ability to work independently and as part of a team., • Comfortable working under pressure while maintaining quality standards., • Experience in CMM programming., • Calibration experience., • Background in engineering or aerospace industries., • Proficient in MS Word, Excel, and Outlook., • Self-motivated and deadline-driven., • Strong interpersonal and communication skills., • Process-oriented with a problem-solving mindset., • Flexible, cooperative, and enthusiastic., • Reliable and conscientious.

Caretaker and Estates Operative Hours: Full time (37 hours each week, all year round) - Monday – Friday on a shift pattern basis of mornings 06:00 – 13:00 and afternoons 13:00 – 21:00 Duration: Permanent Salary: Up to £25,456 per annum + benefits Location: Rotherham College, South Yorkshire Closing date: 08/06/2026 About the Role As a Caretaker and Estates Operative, you are the backbone of our campus experience. You will ensure our buildings are safe, welcoming, and fully prepared for students, staff, and visitors every day. Your friendly professionalism and dedication will directly shape how people feel the moment they step onto our campus, making you a vital face of the College community. Main duties will include; • To participate in shift rota to ensure there is an Estates presence on all campus’s whenever the College buildings are open and conduct procedure to open and maintain security of college premises, in addition to keeping premises and equipment secure during the day., • To assist in maintaining the cleanliness of college buildings and grounds by the removal of refuse and emptying of bins., • Promoting general health and safety by keeping corridors and fire exits clear at all times of any spills, trips or hazards as reported or noticed by yourself during your walks around campus grounds., • Ensuring rooms are prepared for use, setting up rooms for curriculum areas or meeting rooms, assisting with staff room moves or re-arrangement of furniture, • Ensuring that goods / documents post and parcels are delivered quickly to the correct areas, college campus, externally or within college buildings, so that those departments can work effectively., • Routine maintenance and repairs, where appropriate advising on suggested improvements to the general environment and to support risk assessments and pre planned maintenance programmes., • Responding to College emergencies including duties of evacuating the buildings in the case of a fire / fire drill and directing emergency services as appropriate and responding to lift breakdowns as required to release trapped persons., • Assisting in the provision of First Aid as and when required You will… • You will have prior experience of working in a maintenance/security/caretaking role or similar. This ideally would be within the education sector, but not essential., • You will hold a Level 2 (or equivalent) qualification in English and Maths or be willing to work towards. Department Info You will report to the Estates and Facilities Management Team and work co-operatively with colleagues across all College Campuses and premises. Our excellent benefits and rewards package: • Access to local government pensions scheme (with employer contributions from 15.6% to 23.68%), • Up to 44 days annual leave per year including closure during Christmas period (pro-rata for part time working), • Access to our gyms, restaurants and salons, • Staff health & wellbeing and benefits schemes including in-house Occupational Health service, • Extensive wellbeing support through a digital Wellbeing Hub that offers a broad range of support for physical, mental, and financial wellbeing., • Full, part time and flexible working hours available in many roles, • Free Parking available at all of our sites, • Fantastic career development opportunities including funding for teacher training, apprenticeships and various other industry recognised qualifications, • New FE teachers can also apply for grants of up to £6,000 in STEM subjects (conditions apply) through the teacher retention initiative, • Recruitment Referral Scheme for all employees, worth £200 per referral made What is the RNN Group? RNN Group’s main goal is to be an ‘outstanding’ education and training provider and this is at the heart of everything that we do. To help us achieve this we are looking to recruit highly motivated, innovative and dynamic individuals to join our existing teams. To be a part of the team at RNN Group we will expect you to be committed to our values too To Apply If you feel you are a suitable candidate and would like to work for RNN Group, please click apply to be redirected to our website to complete your application.

Maintenance Electrician Shift Pattern: Week 1: 6am-2pm, Fri 1:30pm Week 2: 6am-2pm, Fri 1:30pm Week 3: 7am-3pm, Fri 2:30pm Week 4: 12pm-8pm, Fri 7:30pm Salary: £42,000 to 44,670 + Pension + Benefits Location: Rotherham Reference: Jo7199/AD The Company My client is one of Europe’s leading manufacturers within its field of premium products supplying into a wide variety of industries. The company is a well established producer to the global marketplace. Key Skills • Apprentice Trained Electrical Engineer, • Experience of PLC systems & Automated machinery, • 17th or 18th edition The Role The successful candidate will be responsible for all aspects of day-to-day engineering and maintenance activities ensuring work is carried out to the highest standards and maximising machine efficiencies. The ideal candidate will come from an electrical engineering background and should be able to work on their own initiative, be a time served engineer with electrical bias (but some multi-skilled knowledge) and have process machinery manufacturing experience. If you have worked on PPM systems, it would be advantageous. You will work on the maintenance of clutches, drives, gearboxes, pumps, general mechanical work, together with other manufacturing machinery. There is a huge amount of training on offer so the successful candidate will be in line to broaden their skills considerably. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

CNC Turner Sheffield Shift Patters / Working Hours: Days (38 hours): Monday - Thursday: 7:15am - 16:00pm & Fridays 7:15am - 12:15pm. Nights (40 hours): Monday - Wednesday: 18:00pm - 6:00am & Thursdays 16:00pm - 20:00pm Night working hours are paid at a premium of x1.5 (£23.37). day/nights are alternate each week General Summary of Role: The role will be responsible for machining sensitive aerospace components in line with the master production schedule to customer drawings working with exotic aerospace materials. Duties & Responsibilities including but not limited to: • Work to close tolerance on small batch work predominantly fixture based in a wide range of aerospace materials such as Jethete, titanium and nickel-based alloys., • Ability to learn multiple machines within the business., • Understand and be able to interpret engineering drawings., • Understand various machine controls like Heidenheim, Fanuc, Siemens etc., • Use of overhead cranes for fixture transportation., • Have a good level of computer literacy., • Assist with SQDCP boards on a daily basis when required., • Have a good understanding of manual measuring equipment, micrometres, internal and external and various other types of measuring equipment., • Take extreme care and attention in handling aerospace parts., • Maintain a clean and tidy work area, • Collaborate with team members to achieve production goals., • Carry out TPM checks and assist on machine maintenance when required, • Support preventative actions on machine and fixtures maintenance Experience, Knowledge, Educational and Work Achievements • Experience in CNC turning on multiple types of machines., • Demonstrate a good level of numeracy / literacy., • Experience in self-inspection and recording results via SPC charts and other methods of data capturing., • Be confidant leading a team and organising work priorities., • A good understanding of Health and Safety., • Ability to work individually or as part of a small team., • Effective communication skills., • Have a proactive and positive attitude to improvements and 5’s., • Displays flexibility and adaptability. Willingness to improve on existing skills and learn new ones., • Demonstrates a strong work ethic., • A diligent person who works hard to achieve our company goals., • Honesty and integrity to uphold our company values. Communication, Respect, Empowerment, Action, Teamwork, Environnent., • Confident person who can help others when required., • Good team player and communicator throughout all levels of the business. Benefits: • Westfield Health and Rewards, • Pension (employee 3% and employer 6%), • Death in Service (x2 salary), • 35 days annual holiday, • Internal benefit and reward scheme i.e. cheers for peers rewards, employee of the year and refer a friend schemes., • On site parking, • Company sick pay, • Appointment allowance

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company Electrical Maintenance Engineer The maintenance engineering function supports the safe and reliable operation of site equipment through a combination of planned maintenance, fault response, and continuous improvement activity. The team works across a range of production and support areas, maintaining electrical and associated systems to ensure consistent performance and minimal disruption to operations. What the Team Does Day-to-day activity is a balance of preventative maintenance and reactive work, responding to issues as they arise while also working to reduce the likelihood of repeat problems. Typical responsibilities across the team include: • Diagnosing and resolving issues across plant and equipment, • Completing scheduled maintenance to support operational reliability, • Recording maintenance activity within site systems, • Supporting planning and prioritisation of workload, • Managing and sourcing required spare parts and materials, • Working alongside external specialists when needed There is also an ongoing focus on identifying improvements to equipment performance and maintenance processes. How the Team Operates The environment is production-driven, and priorities can shift quickly depending on operational demands. The team works collaboratively to respond to these changes, ensuring work is completed safely and efficiently. Key focus areas include: • Maintaining safe working practices at all times, • Delivering consistent and reliable workmanship, • Applying a structured approach to problem solving, • Supporting overall site performance Team Capability The team brings a mix of experience across electrical and general engineering disciplines, with the ability to work both independently and collectively to resolve issues and maintain equipment standards. There is an expectation of ongoing development, both in terms of technical capability and ways of working. General Expectations • Contribute to a safe and compliant working environment, • Support plant reliability and operational performance, • Maintain clear and accurate records of work completed, • Engage with continuous improvement activity, • Remain flexible in response to changing priorities, • CANDIDATES FROM A HEAVY ENGINEERING OR METALS BACKGROUND WITH FURNACE KNOWLEDGE WOULD BE HIGHLY ADVANTAGEOUS ALTHOUGH OTHER MANUFACTURING INDUSTRIES WILL BE CONSIDERED

Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Kiveton employs over 500 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals. Shift Pattern: 4 on 4 off rotating days and nights What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: • Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance, • Responding to internal customer needs to maximise production time according to given priorities, • Complying with food safety standards and controls to ensure all work is carried out correctly and safely, • Completing all necessary documentation ensuring that it is kept accurate and is audit ready, • Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness, • Maintenance on a range of manufacturing/production/packaging machinery What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: • People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification, • Electrically biased, • Have experience working as a Maintenance Engineer within manufacturing/FMCG, • Utilise a proactive approach, with a willingness to learn and develop, • Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits, • Holidays, • Competitive matched pension contributions, • Life insurance up to 4x salary, • Company share save scheme, • Greencore Qualifications, • Exclusive Greencore employee discount platform, • Access to a full Wellbeing Centre platform, • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career. We reserve the right to close this advertisement before the stated closing date.

Role – FLT/Labourer Hours- Mon – Thurs 7am – 6pm (42 hours) Salary- £28 – 30,000 We are working with a reputable subcontract Engineering manufacturing company in Rotherham, Currently looking for an experienced FLT/Labourer to join the team, this is a permanent role and will be on the Day shift Mon – Thurs. Duties will involve- • Assist with the loading and unloading of laser cutting machines, • Retrieving materials from racking systems to allocate to machines, • Packing and Palletising of finished goods, ready for dispatch, • Assisting with stock control and keeping working areas tidy, • Operating the forklift trucks Key Skills • You Must hold valid FLT Licence, • Be organised and Methodical, • Be open and willing to undertake training on the laser cutting machine and press brakes. Renumeration -42 hour 4 day week (£28,000) Profit related bonus scheme: 8% PRBS which is calculated every three months and paid the month after. The scheme is open to new members each January. However, you must complete 6 months employment to be eligible to join. 16 days holiday (pro rata based on a 4 day week extra day for birthday Xmas shutdown covered by the company

Outreach Rehabilitation Support Worker – Sheffield area We are currently expanding our outreach support team and are looking for proactive individuals to join us! This role could be considered as a hybrid role, and applicants could work on both the outreach team and within our rehabilitation residential service if they wish to gain experience in both areas. If you are looking for a dynamic role which is varied, rewarding and within an exceptionally collaborative, positive team, this may be the role for you. Our Outreach Rehabilitation Support Workers work alongside neuro-therapists to help people regain skills and a quality of life after a life-changing injury. The role is interesting and will involve completing activities such as woodturning, bowling, swimming and botcha. Supporting individuals to engage with academic studies such as university. No two days are the same! Our Rehabilitation Support Workers also support with Aspects of Daily Living, including cooking, cleaning, morning and evening routines. The role also involves aspects of personal care. We are interested to hear from individuals from different walks of life, regardless of experience as we provide full training. If you want a job where you can contribute to the lives of others in a continuous learning environment, this may be what you are looking for. Our CQC ‘outstanding’ rated services have also been awarded the ‘platinum’ level Investors in People accreditation. This is almost unheard of at entry level with only 1 or 2 other companies ever achieving this. This is a testament to the teams and their commitment to help individuals thrive within a highly positive environment. We are looking for positive, energetic people, passionate about changing the lives of others through their work. This role with be predominantly in the community, supporting individuals within their own homes and workplaces so it is essential that applicants hold a current UK driving licence and have access to a vehicle. The role involves working on a varied rota including weekend work. Full training is provided for this role, and opportunities are available within our excellent career/ management development programmes. Do feel free to make contact if you wish to discuss the role further, our team will be happy to hear from you! You can also check out our YouTube page Ariya Neuro Care for videos explaining the role of a Rehabilitation Support Worker. Job Types: Full-time, Part-time, Permanent Pay: £13.45 per hour Benefits: • Employee discount, • Free flu jabs, • Health & wellbeing programme, • On-site parking Shift: • Day shift, • Night shift Work Location: On the road - driving licence and vehicle required.

Customer Success Manager @ Tes 📍 Sheffield (Hybrid – 3 days office / 2 from home) 💷 Up to £48,000 base + commission We’re at an exciting point in our journey and are looking for a Customer Success Manager to play a key role in how we support, retain and grow our education customers. This is a brand‑new role, created as part of a wider shift in how we operate. We’re moving beyond reactive support and building a more proactive, value‑led Customer Success function, one that truly wraps around customers, understands their day‑to‑day challenges, and helps them get meaningful outcomes from our products. We provide software solutions into the education sector, supporting schools and trusts using platforms such as Staff Management, Provision Map, Class Charts and MyConcern. Our goal is simple but important: to make teachers’ lives easier, improve visibility for leaders, and support better outcomes for students. In this role, you’ll own a portfolio of education customers end to end. You’ll build strong relationships with key stakeholders, understand what success looks like in their context, and help embed our solutions into everyday workflows. You’ll act as a senior escalation point when things get complex, proactively manage account health and risk, and lead renewal conversations rooted in real value. Where it makes sense, you’ll also identify opportunities to expand usage across the wider product suite. Because the role is new, there’s genuine opportunity to help shape how Customer Success works here, influencing ways of working, customer engagement models and how value is measured and demonstrated. What we’re looking for You’ll already have experience in Customer Success, Account Management or a similar role, ideally within SaaS, and be comfortable owning customer relationships and commercial outcomes. You’ll enjoy working closely with customers, solving problems, joining the dots internally, and balancing service excellence with revenue responsibility. Why join us You’ll be joining during a period of real change and momentum, with the chance to make an impact, take ownership, and help build something that lasts, all while working on products that genuinely matter in education. If this sounds like the kind of role where you could do your best work, we’d love to hear from you.

Please Note we don't provide Sponsership\nGK healthcare is a healthcare recruitment consultancy with a reputation for providing outstanding service across UK. If you are interested to work in multi-bedded hospitals with any of the following organisations such as NHS, Nursing Homes,Private Cares, Elysium and Ramsey hospital.\nResponsibilities:\n·Supporting residents with their wellbeing on a day-to-day basis.\n·Monitor, observe and record progress, ensuring care plans are followed effectively.\n·Work collaboratively with healthcare professionals, families and other support staff to ensure comprehensive care.\n·Provide one to one support.\nRequirements:\n·Right to work in the UK\n·Must have at least 6 months experience\n·Must have Mandatory health training certificate\n·A valid Enhanced DBS\nNVQ LEVEL 3 Training\nMedication Training\nBenefits:\nWeekly pay\nPension scheme\nHoliday pay\nSchedule:\n10-hour shift\n12-hour shift\n8-hour shift

Exciting Engineering & Foundry Opportunities in New Zealand\nWe are currently seeking experienced and trade-qualified professionals to join a leading global manufacturer in New Zealand. This is an outstanding opportunity to gain international experience while working with advanced engineering and manufacturing processes in a world-class production environment.\nThe successful candidates will initially be offered a 12-month work contract, with the opportunity to transition to a further visa and extend their stay, subject to performance and employer requirements. Applicants will be required to pay for their visa application upfront; however, these costs will be reimbursed upon successful commencement of employment. Due to visa eligibility requirements, applicants must be under 35 years of age and have a clean criminal record.\nFor experienced Foundry Workers, we are recruiting Sand Moulder Grade 2 professionals. The day shift rate is NZD $34.20 per hour, the afternoon shift rate is NZD $37.15 per hour, and the night shift rate is NZD $40.93 per hour. Previous foundry experience is essential, with sand moulding experience highly preferred. Candidates must be willing and able to work rotating shifts.\nTrade-qualified Foundry Workers are also required for Metal Casting Trades Worker positions. These roles require an NZQA Level 4 assessment or equivalent recognised qualification. The day shift rate is NZD $40.31 per hour, the afternoon shift rate is NZD $43.27 per hour, and the night shift rate is NZD $44.09 per hour. Applicants must hold a recognised trade qualification in metal casting or a related discipline and have previous industrial foundry experience.\nExperienced CNC Machinists are invited to apply for CNC Machinist positions offering NZD $33.44 per hour on day shift, NZD $36.39 per hour on afternoon shift, and NZD $37.22 per hour on night shift. Candidates should have proven CNC machining experience, the ability to read engineering drawings, work to tight tolerances, and operate modern CNC machinery and tooling.\nWe are also recruiting trade-qualified Fitting and Machining Engineers. These positions require an NZQA Level 4 assessment or equivalent qualification. Rates of pay are NZD $39.41 per hour for day shift, NZD $42.37 per hour for afternoon shift, and NZD $43.19 per hour for night shift. Applicants should possess a recognised trade qualification in fitting and machining or mechanical engineering, together with strong mechanical aptitude and experience in precision engineering environments.\nIn return, we offer competitive hourly rates with attractive shift allowances, long-term career opportunities, valuable international work experience in New Zealand, potential pathways to visa extensions, and support throughout the relocation and onboarding process.\nIf you have the required skills, qualifications, and experience and are looking for an exciting opportunity to work overseas, we would love to hear from you. Apply today and take the next step in your engineering or foundry career

Temporary Delivery Driver\n\nPosition:\n\n Temporary Delivery Driver\n\nEmployment Type:\n\n Temporary/Seasonal\n\nLocation:\n\n South Yorkshire (Barnsley/Sheffield)\n\nKey Skills Required:\n\n Multidrop Deliveries, Customer Service Excellence\n\nPosition Overview\n We are seeking a reliable, customer-focused Temporary Delivery Driver to join our dynamic logistics team. This position is ideal for an experienced driver who thrives in a fast-paced environment and takes pride in delivering exceptional service to our valued customers. As a Temporary Delivery Driver, you will be responsible for the safe and timely delivery of goods across multiple locations throughout your designated route, ensuring that every customer interaction reflects our commitment to excellence.\n\nWorking hours would cover 40 hours per week, with 1 in 2 Saturday mornings also involved. This is temporary cover for Holidays, volume and sickness therefore flexibility is a must! Hourly rate starts at £12.71 per hour\n\nKey Responsibilities\n\n Execute efficient multidrop delivery routes, completing between 25-40 stops per day depending on route density and package volume\n\nLoad and organise delivery vehicle at the start of each shift, ensuring packages are arranged for optimal route efficiency\n\nAccurately scan and process all packages using handheld devices or mobile applications at each delivery point\n\nNavigate assigned delivery routes using GPS systems and route planning software to maximise efficiency and minimize fuel consumption\n\nAdapt to route changes and additional deliveries as required throughout the working day\n\nSafely handle packages of varying sizes and weights, following proper lifting techniques to prevent injury\n\nEnsure all deliveries are completed within designated time windows and service level agreements\n\nMaintain accurate delivery records and obtain proof of delivery signatures or photographs as required

Manufacturing Operator\n\n📍 Location: Sheffield\n🕒 Shift Pattern: Panama (12-hour Days & Nights)\n💷 Salary: Starting from £27,217.17 (£1,500 shift premium)\n📈 Progression: Up to £34,867.35 within 18 months\n⏱ Overtime: Paid at time and a half\n\nAbout the Role\n\nWe are seeking a Manufacturing Operator to assist in running extrusion and print lines producing plastic building products. This role is key to ensuring production targets, quality standards, and operational efficiency are consistently achieved.\n\nKey Responsibilities of the Manufacturing Operator\n\n Assisting in the setup and operation of extrusion and print lines\n\n Carrying out line changeovers, including materials and print settings\n\n Performing quality inspections and testing\n\n Packing, labelling, and preparing finished goods\n\n Working to production targets and performance standards\n\nThe Ideal Manufacturing Operator\n\n Experience in manufacturing or machine operation (plastics experience desirable)\n\n Knowledge of extrusion, injection moulding, or similar processes (advantageous)\n\n Ability to work independently and within a team\n\nWhat's On Offer to the Manufacturing Operator\n\n Clear progression through structured pay grades\n\n Opportunity to reach top salary within 18 months\n\n Full training on machinery and processes\n\n Overtime paid at enhanced rates\n\n * Long-term career development opportunities\n\nShift Pattern Reminder!!\n\nPanama shift rotation (12-hour day and night shifts), offering consistent scheduling and regular time off

Shift Times: 4pm to 9:30pm start time with the route planned in at 8 - 12 hours long\nShift Pattern: Friday and Saturday (2 days per week)\nPay Rate: £18.11 per hour\nWorkload: 1-3 Drops Per Shift (Delivering to retailer)\n \nWhy Greencore? \nFollowing the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop.\n \nKiveton:\nKiveton serves as the hub for Greencore's chilled trunker fleet. Our consolidation and dispatch area forms the operational base for a substantial fleet of temperature-controlled vehicles, facilitating efficient distribution for Greencore companies and other contracted chilled food manufacturers.\n \nWhat you'll be doing:\n\nEnsuring the safe and timely delivery of goods.\nDirectly liaising with delivery points.\nPortraying a professional branded image to all our customers.\nMaintaining excellent relationships with internal and external stakeholders.\nObtaining signed or electronic Proof of Delivery (POD) documents.\nCompleting necessary transport administration at the beginning, end, and during shifts.\nDriving in a fuel-efficient and safe manner.\nFull compliance with all EU Driver Hours and Road Transport Directive (RTD) Regulations.\nEnsuring goods are transported within correct temperature specifications.\nAdhering to safe systems of work for equipment usage.\nCompleting pre and post-vehicle checks and reporting any defects appropriately.What we're looking for:\n\nHave no unspent endorsements, except for speeding and/or parking offences, to a maximum of 6 points.\nBe compliant with the Driver Certificate of Professional Competence.\nHave no convictions (spent or otherwise) for careless/dangerous driving or driving under the influence of drink or drugs within the last 5 years.\nBe fully conversant with the requirements of EC Directive 561/2006 and 3821/85, strictly obeying the law related to Drivers Hours and Tachograph systems.\nPossess reasonable knowledge of the UK Highway Code and the ability to read and understand written instructions displayed on road signs.\nDisplay a reasonable understanding of the legal restrictions applied to Large Goods Vehicles, particularly regarding bridge height warning signs, yellow box junctions, and restricted zones (e.g., London Congestion Charging/London Lorry Ban).\nHave a minimum of 6 months of experience in a similar working environment.At Greencore, we prioritize our people, celebrating diversity, and fostering an environment where everyone can be their authentic selves. Together, we make every day taste better. If you meet these criteria, join us and contribute to driving the future success of Greencore.\n \nWhat you'll get in return:\n\nCompetitive salary and job-related benefits\nHolidays\nCompetitive matched pension contributions\nLife insurance up to 4x salary\nCompany share save scheme\nGreencore Qualifications\nExclusive Greencore employee discount platform\nAccess to a full Wellbeing Centre platform\nEnhanced parental leave and menopause policies\nFree on site car parkThroughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.\n \nWe reserve the right to close this advertisement before the stated closing date

Ready to find the right role for you?\n\nSalary: Competitive plus a 15% annual bonus and Veolia benefits\n \nGrade: 5.1 \n \nHours: 40 hours per week, day shift (Monday to Friday). You may occasionally be required to support out-of-hours or weekend cover as part of the site's operational requirements.\n \nLocation: Energy Recovery Facility\n \nBernard Road Service Centre\n \nSheffield\n \nS4 7YX\n\nWhen you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. \n\nAs a Shift Team Leader you'll be pushing for innovative solutions to create a more sustainable future for all. We know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture.\n\nWhat we can offer you;\n\n25 days of annual leave plus bank holidays \n \nAccess to our company/people's pension scheme\n \nDiscounts on everything from groceries to well known retailers\n \nAccess to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to\n \n24 hour access to a virtual GP, 365 days a year, for you and family members in your household\n \nOne paid days leave every year to volunteer and support your community \n \nOngoing training and development opportunities, allowing you to reach your full potential\n\nWhat you'll be doing; \n\nSupporting ERF/power plant operations, including waste-fired high-pressure boilers, steam cycle systems and generators\n \nOperating at senior authorised person level, or working towards SAP status, to support safe control of work\n \nMonitoring and supporting plant operation from the central control room using the distributed control system (DCS)\n \nManaging permit to work and safe systems of work, including permit office activities\n \nCoordinating work planning and scheduling with engineering and operations teams, including outage and maintenance planning\n \nRaising defects and progressing work orders using the CMMS (EAM or equivalent)\n \nSupporting compliance with the environmental permit/PPC permit, including monitoring and reporting any non-compliance or incidents\n \nApplying site safety rules and relevant health and safety legislation, including PUWER, LOLER and CDM requirements\n \nCoordinating cross-boundary works with external parties, including DNO interface for electrical works\n \nOperating plant and equipment as required by site demands, including mobile plant and the refuse crane (where trained/authorised)\n \nMonitoring stock levels and coordinating receipts of consumables and collections of residues\n \nCompleting hazard observations and behavioural safety monitoring (e.g., TeamSafe) to support a strong safety culture\n\nWhat we're looking for:\n\nRelevant qualifications or equivalent experience in energy recovery facility (ERF) operations or power plant operations\n \nEngineering knowledge within an industrial/process environment\n \nNEBOSH General Certificate and/or IOSH Managing Safely\n \nConversant with distributed control systems (DCS) / control room operations\n \nKnowledge of boiler water and steam cycle treatment and chemistry\n \nLegionella awareness\n \nStrong working knowledge of health and safety legislation including PUWER, LOLER and CDM Regulations\n \nCity & Guilds confined space - medium risk (or equivalent)\n \nFamiliarity with power industry / electricity board safety rules\n \nSenior authorised person (SAP) status, or authorised person working towards SAP status\n\nWhat's next?\n\nApply today, so we can make a difference for generations to come.\n\nWe're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. \n\nWe're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. \n\nWe're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive.\n\nIf you are successful in securing a new role or promotion within the company, any offer to you may be subject to the acceptance of standardised terms and conditions. These new terms and conditions may differ from your current contract, if you have any questions about how this might affect you, please don't hesitate to contact your line manager or the HR team.\n\nJob Posting End Date:\n\nWhat's next?\n\nApply today, so we can make a difference for generations to come.\n\nWe're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. \n\nWe're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. \n\nWe're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

M+E Maintenance Engineer\nPermanent - Shift Pattern\nHours: 6am - 2pm, 2pm - 12 Midnight currently | - This will be changing the in near future to the following 6am - 2pm, 2pm - 10pm, 10pm to 6am |\nSheffield\n£45,000 - £48,000 + Package\nThe M+E Maintenance Engineer Opportunity\nA recruitment partner is currently supporting a well-established engineering and manufacturing business in the search for an experienced M+E Maintenance Engineer to join their maintenance team.\nThis position will play a key role in supporting day-to-day operational reliability across a fast-paced manufacturing environment. The successful candidate will be responsible for both electrical and mechanical maintenance activities, ensuring plant equipment, systems, and machinery are maintained to a high operational and compliance standard.\nThe business operates within a precision engineering and heavy industrial environment, supplying specialist engineered products into demanding global markets.\nKey Responsibilities of the M+E Maintenance Engineer\nThe successful M+E Maintenance engineer will be responsible for carrying out planned preventative maintenance as well as responding to reactive breakdowns across the facility. The role will involve diagnosing and repairing both electrical and mechanical faults in a safe and efficient manner, minimising downtime and supporting production continuity.\nYou will assist with installation works and modifications to plant equipment where required, while ensuring all maintenance activities are completed in accordance with site safety procedures and compliance standards. Prior to carrying out tasks, suitable risk assessments and safe systems of work must always be followed.\nThe role will also involve working with site electrical and control systems, supporting continuous improvement initiatives, and maintaining accurate maintenance records using internal systems and software.\nYou will regularly liaise with production teams, supervisors, and external contractors to coordinate maintenance activities and ensure work is completed effectively and safely.\nRequirements from the M+E Maintenance Engineer\nApplicants should hold a recognised apprenticeship within either electrical or mechanical maintenance engineering and have previous experience working within a manufacturing, industrial, or heavy engineering environment.\nCandidates should have strong fault-finding abilities across mechanical and electrical systems, with exposure to PLCs, plant controls, and automated systems considered highly advantageous.\nThe ideal candidate will be self-motivated, safety conscious, and capable of working independently or as part of a wider engineering team. Strong communication skills and basic computer literacy are also important for the role.\nWhat’s on Offer for the M+E Maintenance Engineer\nThis opportunity offers the chance to join a stable and growing engineering business with a strong reputation within its sector. The company can provide long-term career development, exposure to complex engineering systems, and the opportunity to work within a highly skilled maintenance environment

SUPERVISOR - SHEFFIELD STATION, STARBUCKS\n\n \n\nPay Rate: £13.61 per hour\n \n\nWe have Part Time (20hrs) roles available, with the opportunity for additional hours during peak times.\n \n\nHours of operation are 4:00am to 9:30pm. Working flexibly across weekdays, weekends, bank and public holidays.\n\n \n\nJoin our team as a Supevisor & step into the buzz of hospitality leadership at SSP! Work with iconic brands like Starbucks, M&S, Burger King and BrewDog in some of the busiest locations across the UK & Ireland. No two days are the same - lead your team, deliver great service, and be part of the energy!\n\n \n\nABOUT YOU:\n\n \n\nHospitality moves fast - and so do you! If you thrive on action, love leading people, and want to make an impact every day, our Supervisor role’s got your name on it.\n\nDue to some responsibilities within the Supervisor role, applicants will need to be 18 years of age or over to perform certain tasks or work on certain shifts. \n\n \n\n \n\nABOUT THE SUPERVISOR ROLE:\n\n \n\nTake ownership of opening, closing, and daily operations while solving problems on the fly.\n\nLead your team through busy shifts, keeping the energy high and the atmosphere positive.\n\nInspire your team to deliver great customer service, be the go-to person for customer and team queries.\n\nResults focussed, staying informed about unit performance and championing improvements.\n\nPrevious experience leading a team in busy Hospitality or Retail.\n\n \n\nAS A SUPERVISOR WE WILL OFFER YOU:\n\n \n\nDiscounted Meal while on shifts.\n\nEmployee Discounts.\n\nFriends and Family Discount App.\n\nAward-winning training, apprenticeships and development programs.\n\nHealth & Wellbeing Support.\n\nA fast-paced, rewarding role where you’ll lead great people and shape the atmosphere every shift.\n\n \n\n \n\nStep up, lead brilliantly and apply today to join SSP as a Supervisor!\n\n \n\nAt SSP, we value diversity and are committed to building a team that reflects a variety of skills, talents, and backgrounds

CNC Turner\n\nLocation: Sheffield\n\nJob Type: Full-Time, Permanent\n\nSalary: Competitive (dependent on experience)\n\nHours: Monday to Friday, Day Shift (early finish on Friday)\n\nAbout the Company\n\nA well-established precision engineering business based in Sheffield, specialising in high-quality machined components for industries such as aerospace, automotive, and general engineering. Our focus is on delivering exceptional quality, innovation, and customer satisfaction.\n\nRole Overview\n\nWe are seeking an experienced CNC Turner to join our team. The successful candidate will be responsible for setting, operating, and programming CNC lathes to produce precision components to tight tolerances.\n\nKey Responsibilities\n\nSet and operate CNC turning machines (Fanuc or similar controls)\nRead and interpret engineering drawings and specifications\nProgram CNC machines using G-code or conversational programming\nPerform quality checks using micrometers, verniers, and gauges\nMaintain machinery and adhere to safe working practices\nWork to production schedules and meet deadlines\nCollaborate with engineering and production teams to improve processesRequirements\n\nProven experience as a CNC Turner in a precision engineering environment\nAbility to read and understand technical drawings\nStrong knowledge of machining principles and tooling\nExperience with Fanuc or similar CNC controls\nExcellent attention to detail and commitment to quality\nAbility to work independently and as part of a team\nApprenticeship or relevant engineering qualification (preferred)Benefits\n\nCompetitive salary based on experience\nOvertime available\nCompany pension scheme\n28 days holiday including bank holidays\nSupportive working environment with opportunities for progression

Independent Forgings and Alloys, one of Europe's leading precision forging companies, is expanding and now looking to recruit a Heat Treatment Operative to join its Sheffield-based team. This is an excellent opportunity to join a well-established and highly respected organisation, working within a fast-paced aerospace manufacturing environment while benefiting from long-term stability, training, and career development opportunities.\n\nCompany Details\n\nIndependent Forgings and Alloys Ltd (IFA) sits uniquely as the only single sited forge with open-die radial, press, hammer & ring rolling and closed-die extrusion, drop stamp and blade forging in the world. Through our extensive forging capabilities and processes, we offer a fully integrated metals service centre: from ingot/billet and forging through to fully tested and released machined products.\n\nJob Vacancy\n\nAs the Heat Treatment Operative, you will be based at the Sheffield manufacturing site within the Heat Treatment Department, supporting the safe and efficient processing of aerospace and engineering components through a range of heat treatment operations. Working closely with the Heat Treatment Team Leader and wider production teams, you will ensure all work is completed to strict quality and safety standards within an AS9100 and Nadcap accredited environment.\n\nKey Responsibilities\n\nOperate within company Health & Safety procedures and maintain high housekeeping standards within the Heat Treatment Department.\nWork within accredited quality systems to ensure products meet customer specifications and quality standards.\nEnsure furnaces used for production are fit for purpose and released in accordance with quality requirements.\nReview route cards and charge sheets to prepare work for heat treatment processing.\nBuild, load, and unload charges while maintaining full material traceability throughout the process.\nOperate rail-bound charging machines and cooling/quenching systems safely and effectively.\nCarry out basic furnace operations including temperature setting, heating, cooling, and monitoring furnace charts during heat treatment cycles.\nMonitor and record key process information using documentation and computer systems.\nConduct hardness testing, including surface preparation and reporting of results.\nAssist with hot material transfers from the forge and oversee post-forge heat treatment activities.\nPrepare heat treatment orders for despatch and maintain accurate stock/location records.\nMonitor forge furnaces overnight and follow production furnace programmes.\nLiaise with Forge and Heat Treatment personnel regarding daily production plans and shift requirements.\nSupport Heat Treatment Leaders with shift handovers and day-to-day departmental responsibilities.\nCarry out any other reasonable duties as requested by management.Qualifications and Experience\n\nExperience working within a manufacturing or hot working environment.\nExcellent attention to detail and ability to follow documented procedures.\nStrong team-working and communication skills.\nFlexible approach to working rotating shifts and overtime when required.Desirable Experience & Qualifications\n\nOverhead Crane Licence or FLT Counterbalance Licence.\nExperience working within manufacturing environments.\nKnowledge of heat treatment processes.\nBasic understanding of metallurgy and metals.\nExperience in Brinell hardness testing.\nExperience operating 3-point bend straighteners.\nBasic forge manipulator operation experience.Salary Information\n\nThis is an excellent opportunity for a Heat Treatment Operative to join a highly respected manufacturing business in Sheffield, offering a competitive salary alongside shift premiums and overtime opportunities.\n\nAdditional Benefits\n\n Permanent position with long-term career opportunities. \n Rotating shift pattern across Days, Afternoons, and Nights. \n* Overtime paid at 50% premium. \n Training and development opportunities within a specialist aerospace manufacturing environment. \n Opportunity to work within an advanced AS9100 and Nadcap accredited facility. \n* On-site parking available.\n \nThis position is being recruited by W Talent Recruitment exclusively, who will be conducting the first-stage pre-screen interview. Any questions, please contact Glyn Dobb at W Talent directly

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company\n\nElectrical Maintenance Engineer \n\nThe maintenance engineering function supports the safe and reliable operation of site equipment through a combination of planned maintenance, fault response, and continuous improvement activity.\n\nThe team works across a range of production and support areas, maintaining electrical and associated systems to ensure consistent performance and minimal disruption to operations.\n\nWhat the Team Does\n\nDay-to-day activity is a balance of preventative maintenance and reactive work, responding to issues as they arise while also working to reduce the likelihood of repeat problems.\n\nTypical responsibilities across the team include:\n\nDiagnosing and resolving issues across plant and equipment\nCompleting scheduled maintenance to support operational reliability\nRecording maintenance activity within site systems\nSupporting planning and prioritisation of workload\nManaging and sourcing required spare parts and materials\nWorking alongside external specialists when neededThere is also an ongoing focus on identifying improvements to equipment performance and maintenance processes.\n\nHow the Team Operates\n\nThe environment is production-driven, and priorities can shift quickly depending on operational demands. The team works collaboratively to respond to these changes, ensuring work is completed safely and efficiently.\n\nKey focus areas include:\n\nMaintaining safe working practices at all times\nDelivering consistent and reliable workmanship\nApplying a structured approach to problem solving\nSupporting overall site performanceTeam Capability\n\nThe team brings a mix of experience across electrical and general engineering disciplines, with the ability to work both independently and collectively to resolve issues and maintain equipment standards.\n\nThere is an expectation of ongoing development, both in terms of technical capability and ways of working.\n\nGeneral Expectations\n\nContribute to a safe and compliant working environment\nSupport plant reliability and operational performance\nMaintain clear and accurate records of work completed\nEngage with continuous improvement activity\nRemain flexible in response to changing priorities\nCANDIDATES FROM A HEAVY ENGINEERING OR METALS BACKGROUND WITH FURNACE KNOWLEDGE WOULD BE HIGHLY ADVANTAGEOUS, ALTHOUGH OTHER MANUFACTURING INDUSTRIES WILL BE CONSIDERED

Position: NDT Operative - Radiography (Level 2)\n\nLocation: Sheffield\n\nSalary: £37K + shift allowance\n\nShift Pattern: \n\nMonday to Thursday: 6:00am - 2:00pm, Friday: 5:00am - 1:00pm\nMonday to Thursday: 2:00pm - 10:00pm, Friday: 1:00pm - 9:00pm - +25% shift allowance\nSunday to Friday: 10:00pm - 6:00am (night shift) - +36% shift allowanceNicholas Associates are recruiting an experienced NDT Operative to join our client's Inspection Team.\n\n Key Responsibilities:\n\nRoutine control checks to validate the inspection process and verify equipment calibrations.\nKeeping computerised inspection records and archiving paper records\nEvaluate the results and make accept / rejection decisions based on customer acceptance criteria\nInterpret specification and assist in production of NDT techniques for level III approval\nAssist in audits and ensure continued compliance with the company?s NDT accreditations e.g., NADCAP and UKAS\nNon-destructive examination of castings by Radiography using x-rays to reveal internal discontinuities\nOperating computed radiography system utilising Phosphor Imagining Plates\nLoad and unload film cassettes and process films, check radiographs against samples to ensure correct setup\nCarry out control checks, processor monitoring and verify equipment calibrations\nRestock darkroom cupboards and replenish processing solutions\nView and interpret radiographs produced in both in-house and externally by subcontractor and evaluate results in respect to customer acceptance.Experience / Skills Required:\n\nIdeally qualified to EN4179 / NAS410 Level 2 (castings experience preferable but not essential)\nMust have experience of inspection of castings within aerospace, nuclear or oil and gas industry\nMust be willing to undergo relevant company based Re-Qualification to ASNT & NAS410\nWillingness to undergo further training to gain Qualification in other methods where required\nExcellent communication skills - both written and verbal\nComputer literacy and experience of Microsoft Office Suite applications would be desirable, but training will be provided\nGood team worker but someone who can also work under their own initiativeBenefits:\n\nHolidays 22 days per year, plus 1 additional day for each year of service up to 5 years, plus bank holidays.\nGenerous Pension scheme\nOptional Westfield scheme\nFree onsite parking\nRecruitment Referral Scheme\nCareer Development and Progression Opportunities \n\nAbout Us\n\nWe are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options.\n\nWe are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Maintenance Engineer\n\n£45,000 Per Annum\n\nMonday - Friday - DAY SHIFT - 7am - 3pm + Company Van\n\n Enhanced Overtime Rates\n\n Company Profit Share Scheme\n\n Training Courses + Upskilling Qualifications\n\nWe have partnered with a leading manufacturing company, are looking for a highly skilled and qualified engineer within any of the following sectors - Packaging, FMCG, Food Production, Warehouse, Manufacturing.\n\nThe main responsibilities of the Maintenance Engineer will include.\n\n An mechanical and electrical maintenance focus across all production operations\n\n Ensuring machinery is maintained and fully functional - Conveyors, robotics, cranes, automation equipment\n\n Maintaining all mechanical and electrical process equipment.\n\n Fault finding and diagnostics.\n\n Following a PPM schedule and recording follow up work.\n\n Continually developing to improve operations to drive improvements in quality, cost and safety.\n\n Assisting production with machinery problems and setups, providing relevant training when appropriate.\n\nIf you are interested in this Maintenance Engineer role, please submit an up-to-date CV through this advert or call the Eko Talent on (phone number removed)

Please Note we don't provide Sponsership\n\nGK healthcare is a healthcare recruitment consultancy with a reputation for providing outstanding service across UK. If you are interested to work in multi-bedded hospitals with any of the following organisations such as NHS, Nursing Homes,Private Cares, Elysium and Ramsey hospital.\n\nResponsibilities:\n\n·Supporting residents with their wellbeing on a day-to-day basis.\n\n·Monitor, observe and record progress, ensuring care plans are followed effectively.\n\n·Work collaboratively with healthcare professionals, families and other support staff to ensure comprehensive care.\n\n·Provide one to one support.\n\nRequirements:\nYou'll need to have current NMC registration and a good knowledge of the most up-to-date clinical practices to join us as a Registered Nurse (RGN). Experience of producing well-developed care plans and detailed risk assessments is important too, as is an understanding of regulatory frameworks, including DoLs/MCA and Royal Pharmaceutical guidelines. Dedicated and compassionate, you'll pride yourself on your person-centred, thoughtful approach to nursing.\n\n·Right to work in the UK\n\n·Must have at least 6 months experience\n\n·Must have Mandatory health training certificate\n\n·A valid Enhanced DBS\n\nBenefits:\n\nWeekly pay\n\nPension scheme\n\nHoliday pay\n\nSchedule:\n\n10-hour shift\n\n12-hour shift\n\n8-hour shift

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Barnsley / Doncaster cluster, covering areas like Barnsley, Doncaster, Mexborough, Conisbrough, Thorne, Askern, Bentley, Goldthorpe, Wath‑upon‑Dearne. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile:, • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Field Market Research Interviewer | Part‑Time, Flexible | Paid per Shift | Car Required Join Ipsos and step into a role where every shift takes you on the move. As a Field Market Research Interviewer, you’ll travel on local bus routes and speak with passengers to help improve public transport across the UK. A Day in the Life You start your shift by heading to your assigned bus route or stop. Equipped with your Ipsos tablet, forms, and ID badge, you hop on the bus and begin your journey. As the bus travels through your local area, you: • Approach passengers during their journey, • Ask a short set of questions, • Capture their experiences and feedback, • Occasionally record footfall as required Some shifts involve being on the bus for the full route, while others may involve a fixed three‑hour session at a bus stop or bus station. Either way, free travel is provided on the bus you interview on. You’ll meet people from all walks of life, gather valuable insights, and complete your shift knowing your work helps shape the future of public transport. What You Can Expect • Paid per shift, • Around 2 shifts per week, depending on workload in your area, • Full training provided, • Flexible part‑time work, • Additional opportunities available, paid per performance Why Join Ipsos? • Award‑winning training, • Inclusive and supportive teams, • Discounts through Ipsos More, • Wellbeing resources through Ipsos Wellbeing You’d Be Great If You: • Enjoy talking with people, • Full driving licence, • Can confidently approach the public, • Want flexible work that fits around your life, • Are comfortable being on buses and travelling as part of the job, • Are interested in long‑term fieldwork opportunities Ready to get started? Apply now and become part of our national team of Market Research Interviewers.

SUPPORT ENGINEER (MECHANICAL) UK / REMOTE / HOME BASED - SHIFT BASED WORK BASE SALARY £25-31,500 MAX DOE PLUS BENS PACKAGE With locations based close to both London and Edinburgh, Grw Talent’s client has over 20 years of experience designing and delivering highly complex automated storage equipment and managing full turnkey projects from design through to installation, commissioning and through-life support; for clients in a variety of industries. The business is expanding into new geographies, new customers and developing new technologies. They now need to make the key hire of a Support Engineer to join an existing team. The Technical Support team typically work from home / remote. We will look at candidates based remotely across the UK as long as able to travel when needed. Our client provides 24/7 remote technical support to their customers. The Customer Support Technical Support Team works across mainly day and back shifts, some night shifts and weekend cover. Weekly contracted hours are 37.5. Reporting to the Head of Technical Support, the Support Engineer will take responsibility for triaging a range of machine hardware and software faults, working to resolve them remotely and at times onsite, as well as support customer training and supporting in-field proactive and reactive maintenance. Key responsibilities include: • Converse with the clients and establish their issues while acting to maintain the reputation of our company in a courteous and efficient manner., • Working to resolve both mechanical and software machine issues via a remote connection., • Utilising your skills to triage multiple jobs as they come in ensuring that the most pressing are dealt with first., • Reporting persistent issues or breakdowns through the appropriate channels, ensuring a thorough and accurate description of the issue is given., • Working from home – you must be able to focus while on shift to provide our clients with fast and efficient service., • Travel to various sites around the country and across the world to carry out work on the various machines they support., • Servicing of the machines to ensure smooth operation and the decreased likelihood of breakdowns., • Attending breakdowns to provide safe and thorough repairs to machines, getting them back online as soon as possible., • Training of clients so that they can operate their machinery safely and avoid any mistakes being made that could lead to breakdowns. The ideal candidate is educated to HNC level or time served in an engineering discipline – mechanical engineering preferred. Given that solid training is provided we are open to entry level candidates who want to build a career in field / customer service engineering. Candidates will need to show good capability in working through and resolving technical problems; both hardware and software. You will need to be highly PC / tech literate (especially in Microsoft Windows). We would love to hear from candidates with previous field service or remote engineering product support experience. A customer facing and polished personality is required, and this role will suit candidates who enjoy hands-on problem solving and practical projects in their spare time, such as building, repairing, or experimenting with equipment or technology. Additional requirements: a stable and reliable internet connection; ability to travel within and outside of the UK; driving license preferred. The pace and variety contained in this role make it super interesting and you will learn lots, inside an excellent team. Working largely remote with some occasional travel is a major plus. Your base salary of £25-31.5k DOE is backed up with a competitive benefits package including a company bonus scheme, and paid expenses when travelling. To apply for this role please send your resume and reach out to Katie Hydes from Grw Talent or apply via LinkedIn.

Opportunity This is an opportunity to join IRIS Software Group as we transform into an AI-first company delivering cloud-native solutions that impact millions of lives globally. IRIS produces an integrated suite of mission-critical software applications spanning accountancy, HR, payroll, education, and business operations. You will be working as part of an Agile team to deliver innovative solutions to user stories and requirements, contributing to our modernisation journey that serves over 100,000 customers across 135 countries. The role is challenging and dynamic, with key deadlines to be met as we accelerate our cloud transformation and implement next-generation technologies. You’ll need to embrace continuous learning and bring a focused attitude to tasks that directly enable businesses, schools, and organisations to work smarter and more efficiently. You will be involved in a variety of cutting-edge technical solutions, ranging from the latest .NET technologies using C# to various Front End Web JS Frameworks, all while contributing to our AI-powered platform evolution. You will be supported in your career growth by a highly experienced team, comprehensive learning opportunities, and a vibrant technical community committed to creating exceptional solutions that make a real difference in how our customers operate and succeed. Role Purpose As a Senior Software Engineer, you will be a technical leader within your team, responsible for delivering complex full-stack web applications, serving millions of users, driving technical excellence, and mentoring other engineers. You'll be expected to bring commercial awareness to every technical decision, understanding that the best solution is the one that delivers value to customers and the business, not just the most elegant one. You will work hands-on with cutting-edge UI frameworks, .NET Core backends, and cloud-native technologies while contributing to architectural decisions and ensuring high-quality software delivery across containerised, scalable web products. Key Responsibilities Technical Delivery • Design and deliver complex, scalable systems (multi-service integrations, high-traffic APIs, data processing pipelines) that anticipate edge cases, scalability issues, and long-term maintainability, • Own large features or entire components across their complete lifecycle from conception to production support, • Make commercially aware technical decisions by weighing engineering trade-offs in the context of business commitments, delivery timelines, and customer impact, not just technical purity, • Lead technical discussions and influence architecture decisions within team systems and components, with authority over component-level technical choices and escalation path to Engineering Lead for cross-team impacts, • Drive technical excellence by establishing architectural patterns, standards, and best practices that others can follow, • Ensure knowledge transfer and documentation for owned systems to enable team continuity Collaboration & Communication • Lead with AI-first practices by actively drive AI-led ways of working within the team, using tools such as Cursor, Copilot, and Claude Code as a core part of how you design, build, and ship, while bringing others along on that journey, • Lead story refinement sessions with Product Owners, providing technical expertise for estimation and risk assessment, • Partner with cross-functional teams (product, design, QA) to deliver comprehensive solutions that meet business objectives, • Influence technology choices based on deep technical understanding and business context, • Lead team Agile ceremony facilitation to drive continuous process improvements, and establish team practices that enhance delivery predictability, • Proactively identify and inspire resolution of technical debt and system improvements Quality & Standards • Champion comprehensive quality practices including TDD/BDD standards, automated testing strategies, and shift-left testing, • Lead security implementation across complex features establish security practices and conduct comprehensive security reviews, • Establish development tooling and practices used consistently within the team, • Lead troubleshooting efforts for complex software issues and production incidents, • Establish documentation standards for complex team systems and drive knowledge transfer practices across team deliverables Growth & Development • Mentor junior and mid-level engineers actively to raise team capability and technical standards, • Lead team code review standards establishment conduct complex feature reviews, and drive quality improvements across team deliverables, • Drive continuous improvement and champion responsible AI adoption with team governance practices Required Experience & Skills Technical Skills • Frontend Development: Strong proficiency with modern UI frameworks (e.g. Angular, React, Vue.js, Blazor) including performance optimisation and component architecture OR working knowledge with focus on backend specialisation, • Backend Development: Strong proficiency with .NET Core, C#, ASP.NET Core Web APIs, REST, application architectures, and distributed systems, • Database Systems and Data Architecture: Strong knowledge of SQL, NoSQL and data architecture decisions., • AI-Assisted Software Engineering: Actively engaged in AI-first ways of working by showing a genuine shift in how you approach design, development, and problem-solving with AI as a core part of the workflow, not just a productivity add-on., • Experienced integrating AI tools (Cursor, Copilot, Devin, Claude Code, etc.) into engineering practices to accelerate design, development, testing and debugging, using them critically and responsibly to improve quality, productivity and decision-making., • Observability: Advanced DataDog, Application Insights or Amazon CloudWatch implementation with performance tuning and cost optimisation, • Infrastructure as Code: Infrastructure as Code with either Terraform, Bicep, ARM Templates or AWS CloudFormation/CDK, • CI/CD Design: Design comprehensive CI/CD architectures for team deliverables, establish deployment strategies, and optimise pipeline performance for team efficiency, • Cloud Architecture: Strong proficiency in SaaS using Azure (Functions, Queue, Blob Storage, VMs, etc) or AWS (Lambda, SQS/SNS, EC2, etc.) services, infrastructure design, and performance tuning, • Container Orchestration: Strong containerisation (e.g. Docker) or Kubernetes (AKS/EKS) experience with production-scale deployments, • Architecture Expertise: Expertise in clean architecture principles, SOLID design patterns, and domain-driven design, • Quality & Testing: Drive TDD/BDD adoption in team testing strategy and quality governance, and implement comprehensive automated testing with continuous improvement, • Scalable Solutions: Experience with highly scalable solutions and internet-facing traffic levels, • Performance & Scalability: Profiling and benchmarking applications., • Application Security: Confident vulnerability management, thread modelling and tracking, • Production Support: Knowledge of observability and production support practices. Proficient in debugging complex issues, performance optimization, and production troubleshooting Experience Requirements • 5-7 years of professional software development experience, • Proven ability in delivering complex, multi-system solutions, • Experience working with highly scalable, internet-facing solutions serving millions of users, • Demonstrated technical leadership through architecture decisions, technical mentoring, and cross-team collaboration, • Track record of driving technical excellence, establishing standards, and influencing technology choices, • Active mentoring experience with junior and mid-level engineers, • Experience leading technical initiatives that span multiple sprints or quarters Soft Skills • Commercially aware and outcome-oriented — understands that engineering decisions exist within a business context, and prioritises delivery and customer value over technical perfection, • Demonstrates resilience and adaptability in the face of changing priorities or commercial commitments — able to pivot without losing quality or motivation, • Strong analysis and problem-solving skills for troubleshooting technical issues, • Excellent verbal and written communication skills with ability to explain technical concepts to non-technical stakeholders, • Technical leadership and influencing skills without formal authority, • Ability to utilise technical skills to develop and coach others through mentoring and knowledge sharing, • Collaborative approach and ability to work as part of wider Engineering, Platform and Quality teams, • Conflict resolution skills for technical disagreements and cross-team coordination, • Genuinely curious and AI-forward by continuously evolving how you work, with AI tooling as a natural part of your day-to-day, not an afterthought Desirable Skills • Experience working with regulated or complex domains (finance, health, govtech) with audit requirements, • Experience designing high-quality AI interactions through effective prompt engineering, efficient token usage, and optimisation techniques, combined with practical use of the Model Context Protocol (MCP) to integrate AI systems with tools and services for richer, automated workflows, • Expertise with advanced monitoring and APM strategies using Datadog, including custom dashboards and alerting (or similar observability platform), • Expertise with modern UI architecture patterns (micro-frontends, SSR/SSG), • Knowledge of security best practices and compliance requirements (OAuth2, OIDC, RBAC), • Experience with event-driven architectures, • Exposure to DevOps processes and automation ensuring end-to-end responsibility of features, • Advanced cloud certifications in Azure or AWS

Location: Location & Shift: UK Wide | Monday - Friday | Full-time, with flexibility to travel and stay away as required At Mitie, our people are our greatest strength, and our promise is to create a place to work where you can thrive and be your best every day. We're looking for an Asset Collection Manager to lead and develop our asset collection function, driving high-quality data delivery across complex projects and supporting business-wide asset management objectives. In this role, you'll oversee the end-to-end asset collection lifecycle, working collaboratively with internal teams, clients and third-party providers to ensure consistent, compliant and efficient project delivery. Role Responsibilities • Lead the day-to-day management of the asset collection team, ensuring delivery against project timelines and quality standards, • Provide technical support and asset management expertise to operational teams and key stakeholders, • Oversee project proposals, scopes, delivery and reporting, ensuring all contractual obligations are met., • Manage third-party survey companies and surveyors, ensuring performance, compliance and quality of output., • Monitor and improve data quality, including audit processes, and ensure effective use of systems such as Maximo and MiAssets, • Maintain and develop the project pipeline, supporting planning, scheduling and resource allocation., • Promote a strong health & safety culture, ensuring compliance with statutory and contractual requirements, • Support asset lifecycle management and integration into CAFM systems, enabling effective long-term maintenance strategies What We're Looking For • Proven experience in asset collection and management within a projects-based environment, • Strong organisational and leadership skills, with experience managing teams and multiple workstreams, • Excellent communication, stakeholder management and presentation skills, • Ability to work under pressure, manage competing priorities and deliver accurate work at pace, • Experience with CAFM systems (e.g. Maximo) and data/reporting tools such as Power, • BISolid understanding of compliance, asset management principles and maintenance operations, • Highly organised, proactive and solution-focused, with a positive and flexible approach What's In It For You • Opportunity to lead a high-impact function within a growing and dynamic business, • Ongoing professional development and training, including support for relevant qualifications Exposure to complex, high-profile projects and key client relationships