Trabajos materials en ChesterCrear alertas

Site Mechanical Fitter £30k annual salary + typical overtime earnings of £7k to £10k per annum. Working away allowances are also paid. • Do you like overcoming engineering challenges, • Do you want to improve your skills and knowledge, • Do you want to be in an environment where your skills and mental health are equally important, • Do you want the chance to train to be a mechanical supervisor Duties and responsibilities: Plan and Prepare the Tools and Materials needed to do the job in a timely manner. Take responsibility for ensuring the work is performed to a high standard and on time including activities such as • Bearing, shaft and impeller Changes, • Motor Changes, • Seal Inspections and changes, • Internal Inspections (Confined Spaces), • Crack Detection/ Inspection Workshop refurbishments of fans and pumps (in house) Identification of spare parts from drawings and parts lists Skills and Experience Required: The following list comprises the ideal skills and experience for the role however all candidates of an appropriate skillset will be considered, and training will be given to bring the successful applicant to the required standard of competency in each area. • Fan or Pump Maintenance (or similar rotating machinery), • Assembly Work, • Grinding/ Cutting/ Welding, • Lifting and Slinging and Overhead crane use, • FLT / MEWP Training The majority of the work would be servicing and inspecting Heavy Duty Centrifugal Fans in Energy Recovery Facilities and Stock Pumps in Paper Mills. The work involves both a technical element and physical element and is normally in an industrial setting where adherence to Safe working practices is paramount. The work can sometimes be physically demanding and periodically requires working outdoors and is normally time sensitive. The job often requires working away with overnight stays across most of the UK in the week but rarely at weekends. This equates to typically 6 to 10 nights a month but can vary. Whilst working away there are often longer working hours. They therefore offer very flexible working hours whilst workshop based and pay overtime for additional hours whilst working away as well as allowances for food. Whilst on site the Engineer would be expected to communicate regularly with both their direct supervisor and the Clients representative to update them on the progress of work. This role requires supervision of third-party contractors on site so good written and verbal communication skills are necessary. A positive attitude and a desire to learn would be essential to thrive in this role.

rTriibe is recruiting confident and dynamic Cover Supervisors to work across vibrant secondary schools in Flintshire. This is an exciting opportunity for individuals who are passionate about education and have a natural ability to manage classrooms and engage young people. As a Cover Supervisor, you’ll step into the classroom during teacher absences, ensuring learning continues smoothly and students remain focused and supported. Your Key Roles & Responsibilities: • Supervise classes during the short-term absence of the regular teacher, • Deliver and oversee pre-prepared lesson materials and exercises, • Maintain a positive and orderly classroom environment, • Manage student behaviour in line with school policies, • Collect completed work and provide feedback to teaching staff, • Support students across Key Stages 3 to 5, • Use subject knowledge (Maths, Science, or English – desirable) to keep students engaged, • Communicate effectively with staff, students, and senior leadership teams What We’re Looking For: • Experience working in Secondary school classrooms, • Strong classroom and behaviour management skills, • Confident, professional, and approachable personality, • Excellent communication skills, • Enhanced DBS on the Update Service (or willingness to obtain one) Why Join rTriibe? • Work with a supportive, people-first education agency, • Flexible opportunities to suit your lifestyle, • Gain valuable experience in a variety of secondary school settings, • Be part of a passionate community shaping future generations

Are you the kind of person who thrives on variety, loves bringing order to a fast-moving business, and gets a genuine kick out of seeing projects come together? If so, this new role as Office & Operations Manager could be the most interesting role you'll find!Our client is a growing SME property development group based in the North West, operating across house buying and selling, contracting and renovation and an exciting new outdoor living company. They are looking for an experienced, motivated Office & Operations Manager to join them right at the start of their next growth chapter – and grow with them over the next 2 to 3 years. Really nice people to work with, who value their team.You'll work directly with the Managing Director as the central operational hub of the business - the person who keeps everything ticking, anticipates what's needed next, and makes things happen. No two days will look the same, but you'll have a natural weekly rhythm built around keeping projects on track and the business running smoothly.As the Office & Operations Manager you will have responsibility for… • Liaising with all key stakeholders - subcontractors, tradespeople and materials suppliers – and keeping everyone aligned, • Project planning and scheduling: coordinating live programmes, spotting risks before they become problems, • Price-checking, documentation and paperwork at pre-planning and tender stage, • CRM management — tracking enquiries, leads and client relationships, • Managing the MD's diary, correspondence and day-to-day priorities, • Supporting commercial activity: getting to market on materials pricing, supporting tender submissions, • H&S compliance documentation and RAMS workflow, • Weekly financial check-ins: monitoring spend vs budget and cashflow awareness, • Client communication - building strong relationships with new and existing customers, • Building a small but effective back office team when the time comesThe successful Office & Operations Manager is…, • An exceptional communicator - confident and professional with clients, colleagues, subcontractors and trades alike, • Experienced in developing and managing a small back office team, • Strong on organisation and project planning - you know how to juggle competing priorities without dropping the ball, • Experienced in managing CRM systems - you're comfortable managing pipelines and keeping records sharp, • Numerate, commercially aware and proactive - you don't wait to be asked, • Self-motivated and highly organised - working from home holds no fears for you, • Used to deadlines - and the kind of person who meets them, • Used to keeping a busy director focused and on schedule with the help of your excellent diary management skills, • A problem-solver who anticipates issues before they land on the MD's desk, • Ideally someone with a background in construction, property, or a related trades environment, who is familiar with construction or project management software, • Preferably experienced in a small or growing business where you've had to wear many hats This is a really wonderful opportunity for the right person with the right attitude to really make their mark and grow their career as the business grows. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to.

Korn Ferry is proud to be partnering with a well-established organisation operating within a highly specialised manufacturing environment. With a long history of technical expertise and consistent investment in innovation, the business plays a critical role in supporting a range of advanced sectors, both in the UK and internationally. This heavy engineering company is embarking on a large-scale growth & transformation journey, with considerable investment from its parent company. As the company continues to grow and evolve, it is looking to recruit a commercial focused New Product Introduction Estimator to join their team at their Ellesmere Port site. As the New Product Introduction Estimator, you will be a pivotal member of the Commercial Team, supporting and managing the introduction of new products and materials from concept through to full-scale production. You’ll have oversight of product manufacturability, supply chain stability, quality compliance, and lead successful transitions from R&D into mass commercial production. Becoming an NPI Estimator for our client will give you the opportunity to contribute to products and technologies that have far-reaching impact across multiple industries globally. How you’ll add value: • Lead the development of materials from research through to production-scale implementation, including laboratory and plant trials, processing routes, testing methods, and final properties to achieve product qualification., • Drive end-to-end NPI programmes, leading all activities from concept evaluation, prototyping, and pilot runs through to production ramp-up., • Establish and manage NPI project plans, timelines, cost estimates, and resource requirements, & coordinate cross-functional teams., • Work closely with suppliers and production teams to assess material properties, processing methods, and safety and environmental impacts., • Manage changes material specifications, ensuring alignment with product requirements., • Develop and optimise manufacturing processes associated with NPI., • Create and validate process flows, control plans, and work instructions., • Lead design-for-manufacturability activities. About you: • Degree in Materials Science, Metallurgy, Chemistry, Physics, or a closely related discipline., • Demonstrable knowledge in financial analysis, sales, and commercial negotiation., • Strong problem-solving capability, with the ability to apply scientific and technical methods to practical production challenges., • Ability to clearly communicate technical results, conclusions, and make commercially focused recommendations., • Proficiency in data analysis tools and technical reporting., • Excellent written and verbal communication skills, including experience producing technical reports., • Strong interpersonal and collaboration skills, with the ability to work effectively in a fast-paced, multidisciplinary environment and meet tight deadlines. What you can expect: • Private Medical, • Dental insurance, • Competitive pension scheme, • 25 days holiday + Bank holidays, • Length of service awards

Maintenance Engineer All vacancies Mon – Fri no weekend shifts Location Deeside, Chester area Shifts = £49,500 - £53,000 + pension + 26 days holiday + 8 bank holidays + benefits Hours Mon – Friday 8 hour shifts – 6 – 2 | 2 – 10 | 10 – 6 A genuinely superb & quite unique opportunity for a multiskilled maintenance engineer to join a market leading business to help setting up and shaping a department. We are seeking multiskilled or / and electrical bias. The Job: • Reporting into the Maintenance Manager, be part of a team to initially help set up the plant / factory, assist with installation and commissioning of new machinery and equipment., • Maintain manufacturing and materials handling machinery such as, conveyors, high speed materials processing machines, pneumatics, PLC’s, bearings, wrappers, packaging machinery., • One vacancy is focusing on the high bay warehouse., • Reactive and preventive maintenance, changeovers, workshop duties., • Contribute to downtime improvements, HSE. The Person: • Seeking Electrical or Multiskilled / NVQ 3 or ONC or HNC, • Experience fault-finding PLCs – eg Siemens, Allen Bradley, Mitsubishi, • Manufacturing plant experience - various backgrounds considered NO VISA Sponsorship

RRxCo is partnered with an exciting and fast-growing Biotech to hire a QA specialist to help bolster their resource. The UK-based business established in 2010 focusing on antibody, protein and peptide drug conjugate medicines and technology. The bioconjugation team was formed in 2011 and moved into a state-of-the-art facility in 2018. The facility has been built for containment; with the safety of their people and the environment in mind, and bespoke laboratories have been designed specifically to accommodate highly potent bioconjugations. Antibody Drug Conjugates combine the cell and tissue specificity of monoclonal antibodies with the cell-killing potential of highly potent small molecules and represent one of the fastest-growing sectors in the oncology field. Summary The Quality Assurance Specialist is responsible for maintaining the quality management systems, ensuring there is adequate QA support for production activities (including batch review), Project support, oversight of material management and approval of materials/ service providers, approval of validation documentation, audit support activities and other QA activities onsite. Deliverables • Responsible for document review (batch documents, logbooks, Protocols, SOPs, forms etc.), • Use Quality systems to ensure compliance (Documentation, Deviation CAPA, Change control etc), • Contributes to supplier quality assurance programme and new supplier qualification., • Supporting and leading quality related investigations, writing investigation reports and initiating/following up on corrective and preventative actions., • Use, support and maintain training systems, training programmes and training documentation., • Proactive administration of the Quality Management systems, metrics/KP! management and trending for Quality., • Works closely with all functions and departments to ensure efficient document review according to cGMP and other regulatory requirements are compliant., • Supports and lead in self-inspections, customer, and regulatory audits., • Is an integral part of the Quality Team, Coach, support and follow values., • Ability to work under pressure and leading Quality based projects., • Support and lead other activities like Data Integrity activities, Quality Risk Management, approving pre and post execution validation documents, Supporting batch release of clinical and commercial bulk drug substance/ API against product specification files., • MHRA and other regulatory guidelines knowledge, • Completion of additional duties reasonable to ensure the efficient running of the QA department. Profile of the individual • Minimum HND Biological subject and have a proven track record in QA in the pharmaceutical industry (or a related industry), • Minimum 5 years' experience in a QA role within either Pharmaceuticals or Biopharmaceutical environment. QA experience of dealing with QC and/or Manufacturing would be advantageous., • Experience using Microsoft Office of programs especially good knowledge in Word, Excel, PowerPoint, and formatting skills., • Knowledge and practical experience of GMP & GLP Systems., • Knowledge and practical experience of Quality systems, Data Integrity, Supplier Management and Quality Risk Management., • Numerical & investigative skills, Coach and support other functions in managing quality issues. Ability to work accurately, with attention to detail in documentation reviews., • Ability to prioritise and deal effectively with a varied workload., • Good communication skills with the ability to form strong working relationships with stakeholders at all levels across the organisation., • Approachable and friendly, with the confidence to constructively challenge results and performance when required. Desirable: • Trained external auditor for external suppliers. Trained trainer, mentor, and coach in Quality., • End to end QA knowledge on pharmaceutical manufacturing knowledge. Excellent technical reports writing skills, advanced Microsoft package skills. Leadership and soft skills proficiency., • Investigational Medicines product knowledge of Manufacturing and QA support.

Role – Senior Consultant Technology – Structure Design Engineer Location – Broughton, Flintshire Business Unit – ENG Compensation – Competitive (including bonus) Job Description • Provide comprehensive Wing Engineering support as part of the overall Wing Design Organization (IAW), • Provide reactive support for A400M daily in-service repairs and ensure adherence to aeroplane Design Organization Approval (DOA) requirements and export control regulations., • Ability to manage modification processes through Decision Gates (DG) including Preliminary Design Review (PDR) and Critical Design Review (CDR)., • Collaborate closely with the offshore engineering team, ensuring clear technical communication, timely guidance, and smooth execution of deliverables., • Lead and support the structural design and development of primary aerospace wing components in accordance with relevant processes, methods, and standards., • Solid understanding of aerospace design principles, airworthiness constraints, and manufacturing processes., • Review and validate design outputs such as 3D models, 2D drawings, and Bill Of Material to ensure compliance with project requirements., • Provide technical expertise on structures, materials, stress sizing, manufacturing considerations, and certification constraints., • Providing support to other general design activities, e.g. Process improvements, cost reduction etc., • Drive issue resolution by interfacing with cross functional teams (stress, manufacturing, quality, configuration management, etc.)., • Ensure adherence to DMU, PLM, and configuration control processes., • Prepare and deliver design reviews (Maturity phases, PDR, CDR, DFM)., • Manage engineering data, documentation, and deliverables in compliance with quality and configuration requirements., • Support digital continuity initiatives and contribute to continuous improvement in design and communication processes. Skillset • Understanding of aerospace design principles and airworthiness requirements., • Knowledge of metallic and composite design principles., • Knowledge of processes and procedures relating to design (RSDP, SIDP, AP, ABD, AIPI, AIPS, etc..)., • Experience of using DocMaster, Airnavx etc, • Aeroplane Design Signatory experience (Checker/approver)., • Valid training certificates in VPM and PASS SSI., • Experience in DMU reviews, Interface Point Management and multi partner environments., • Knowledge of MOD, DQN and RDR. Tools • CATIAv5, SAP (PAC / PEA), PASS, Zamiz, PRIMES, GEMAVICC, GILDA, COLINA, TREND, VPM, AIRNav Required Qualifications (Non-negotiable requirements) 5–10 years of hands on experience in aerospace structural design. Proven experience working on aircraft programs (A320, A330, A350, A380, A400M etc.). About Infosys Infosys is a global leader in next-generation digital services and consulting. We enable clients in 46 countries to navigate their digital transformation. With over three decades of experience in managing the systems and workings of global enterprises, we expertly steer our clients through the many next of their digital journey. We do it by enabling the enterprise with an AI-powered core that helps prioritize the execution of change. We also empower the business with agile digital at scale to deliver unprecedented levels of performance and customer delight. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem. Visit to see how Infosys can help your enterprise navigate your next. All aspects of employment at Infosys are based on merit, competence, and performance. We are committed to embracing diversity and creating an inclusive environment for all employees. Infosys is proud to be an equal opportunity employer.

Cheshire Up to £40K Logistics & Operations Coordinator My client an award-winning technology company are looking for a detailed orientated individual to join their operations department. You will support the day-to-day operational backbone of the company, ensuring that products, hardware, services, and internal processes run smoothly and efficiently. In a fast-paced technology and internet environment, this role bridges logistics, vendors, internal teams, and systems to keep operations scalable, cost-effective, and reliable. Key Responsibilities Logistics & Supply Chain • Coordinate inbound and outbound shipments of equipment, and materials, • Manage relationships with logistics providers, couriers, and fulfilment partners, • Track shipments, resolve delays, and proactively communicate issues, • Maintain accurate inventory records across systems, • Assist in developing, documenting, and improving operational processes, • Monitor operational KPIs and prepare regular reports, • Help identify inefficiencies and recommend process improvements, • Use logistics, inventory, and ERP tools to manage operations, • Ensure data accuracy across internal systems, • Experience in logistics, operations, supply chain, or a similar role, • Experience working in a fast-growth environment preferred, • Strong organisational and multitasking skills, • Excellent communication skills, both written and verbal, • Ability to manage multiple stakeholders and priorities

Senior Project Manager & Project Managers North West Upto £70K + Excellent Benefits Package Manufacturing Hybrid working - Office + Site I am partnering with a well established Engineering Consultancy that supports the Manufacturing across numerous industries: Having already collated an excellent client base of Global Blue Chip & SME's alike, they have gone from strength to strength, winning new accounts and huge projects at the beginning of this year. With such a large project runway and having to turn away opportunities they are looking to add 2 or 3 additional Project Managers to the team. Working across numerous industries including Food / Pharma / Chemical & Packaging - It is not essential to come from one of these Sectors. We are looking for the right Person to join this great business and accelrate the next phase of growth! Job Role: • Execution of projects from initiation to completion, ensuring timely delivery and high quality outcomes., • Advising on design, technical and procurement issues, including development of design brief and preparation of estimates for capital projects., • Identifying potential risks and developing mitigation strategies to ensure successful project delivery., • Overseeing a number of projects at any time, of varying timescales and complexities., • Manage project sites on a day-to-day basis, including supervising and monitoring subcontractors, checking materials, inspecting work, overseeing, • quality control and maintaining health and safety, including site inspections Experience: • 3 plus years in a Project Management Position - Ideally within a Consultancy or Manufacturer., • Proven track record of successfully delivering projects - From concept to completion, • Predominantly based around the North West - But with flexiblility to travel if required., • Experience operating at strategic levels within an organisation, engaging with senior leaders, • Prince 2 / APM methodolgy or similar What you get in Return: • An excellent package of between £60 - £70,000 Salary, • Company Bonus, • Private Healthcare, • 25 days holiday + 8 Bank Holiday, • Private Health Care, • Life Assurance, • Company benefits like Gym Membership, • Company Pension, • Job Satisfaction! If this is ticking all your boxes, APPLY NOW!

Production Manager – Professional Growing Media Westland is seeking a highly skilled and hands-on Production Manager to join our Ellesmere Port site and take full ownership of professional growing media production. This is a site senior, operationally critical role, responsible for ensuring that every unit of Sinclair Professional growing media is manufactured to the highest technical and quality standards. You will act as the site champion for Westland’s Sinclair Professional Brand, ensuring that production processes, raw materials, and finished products meet the highest technical standards across the professional product range. Key Responsibilities • Manage and oversee all production processes for professional growing media, • Provide technical support for Sinclair Professional products, including troubleshooting, customer feedback, and failure analysis., • Liaise with commercial, technical, and customer service teams to inform product improvements, NPD, and operational development., • Oversee the production of raw materials and work-in-progress to meet production mix requirements., • Drive continuous improvement initiatives., • Plan and manage staffing, productivity, and line efficiency to meet daily production targets and minimise waste., • Maintain production areas to GMP and H&S standards, ensuring cleanliness, safety, and operational excellence., • Build and maintain strong relationships with professional growers and area managers to support technical and development queries., • Participate in R&D activities, including grower trials and operational NPD support., • Report trends, KPIs, and production performance to site management and senior stakeholders. Desired Skills & Experience • Proven experience in production management, ideally within horticulture or agriculture environment., • Hands-on experience with growing media products in a production environments, • Strong technical expertise with the ability to interpret, analyse, and present production data., • Excellent leadership, communication, and organisational skills., • Proficiency in Microsoft Office 365 and ERP systems, with experience in KPI reporting and trend analysis. Why Join Westland? This is an exciting opportunity to lead the production of a premium professional growing media range within a market-leading company. If you are a hands-on, technically strong production manager with a passion for horticulture and operational excellence, we want to hear from you!

Job Title: Analytical Chemist Location: Ellesmere Port Contract: Temporary (approx. 6 months, strong potential for permanent role) Salary: Up to £35,000 (dependent on experience) OVERVIEW An exciting opportunity has arisen for an experienced Analytical Chemist to join a specialist materials organisation during a period of growth. This role will support both manufacturing operations and product development activities, working closely with production, R&D, and technical teams. This position is ideal for a hands-on chemist with strong industrial laboratory experience and a background in elemental analysis. KEY RESPONSIBILITY Laboratory Operations • Provide analytical support to manufacturing and R&D activities, • Elemental analysis using LECO (essential) and ICP-OES (highly desirable), • Exposure to techniques such as:, • Optical microscopy / SEM-EDX, • XRD, • Support continuous improvement of existing analytical methods, • Maintain clear, accurate records for sample preparation and analysis, • Ensure traceability and data integrity in line with quality standards, • Liaise with Production and R&D teams to prioritise analytical workloads, • Adhere to health and safety procedures and PPE requirements, • Maintain a clean, organised, and professional laboratory environment, • Manage reagent stock levels and safe handling of hazardous materials MANDATORY REQUIRMENT • Previous industrial laboratory experience, • Hands-on experience with LECO testing, • ICP experience strongly preferred, • Backgrounds from metals, waste, or agrochemicals are particularly relevant

Salary up to £28,000 per annum Regional Law Firm Business Services Team We’re working with a leading regional firm recruiting a Corporate PA to support the Practice Manager, Quality & Risk Manager and Performance & Growth Director. This is a varied, hands-on role covering PA support, operations, facilities, HR coordination and wider business services across the firm. Responsibilities include: • Managing correspondence across phone, email and post, • Diary management, meeting scheduling and setting reminders, • Preparing reports, presentations and meeting materials, • Maintaining digital and physical filing systems with confidentiality, • Researching and compiling information for managers and directors, • Updating databases and assisting with statistical information, • Supporting internal events and training coordination, • Assisting with appraisals, promotions and trainee processes, • Coordinating recruitment, interviews, work placements and onboarding, • Supporting trainee solicitor review processes, • Acting as first point of contact for facilities, security and health & safety queries, • Liaising with contractors and suppliers, including quotes, visits and invoice processing, • Tracking maintenance schedules and key compliance dates, • Managing panel memberships and renewals, • Maintaining user access on third-party systems, • Coordinating DBS checks, • Archiving closed files and preparing documents for return or transfer, • Providing reception cover as required, • General business services and PA support across the firm What we need from you: • Previous experience in a PA role (essential), • Ability to manage a varied workload and changing priorities, • Strong organisation and time management, • Comfortable working in a fast-paced office environment The Perks: • Salary up to £28,000 DOE, • Opportunity to work closely with senior management, • Broad exposure across business operations within a law firm, • Supportive team environment, • Long-term career development within business services If you’re interested, hit that apply button or reach out to Jack Lloyd directly at

Flue Gas Treatment Commissioning Engineer Overview We are seeking an experienced FGT Commissioning Engineer to support the commissioning and start-up of the Flue Gas Treatment system on a large-scale Energy-from-Waste (EfW) facility. The successful candidate will have a strong mix of mechanical and Control & Instrumentation (C&I) expertise, with hands-on commissioning experience in waste-to-energy, power generation, or heavy process industries. This role will involve close collaboration with construction, operations, OEMs, and EPC partners to ensure safe, compliant, and efficient commissioning of the plant in line with environmental permit requirements. Key Responsibilities Commissioning & Technical • Lead and execute commissioning activities for the FGT plant, including:, • Fabric filter or ESP, • Dry/semi-dry scrubbers, • Lime and activated carbon injection systems, • ID fans and dampers, • Stack and emissions monitoring interfaces, • Develop and implement commissioning procedures, test plans, and method statements., • Perform functional testing of mechanical equipment, valves, dampers, and rotating machinery., • Carry out loop checking, I/O testing, and functional testing of instruments and control systems., • Support cold & hot commissioning, performance testing, and environmental compliance testing. Controls & Instrumentation • Verify correct installation and operation of:, • Pressure, temperature, flow, and gas analysers, • Emissions monitoring systems (CEMS interface), • Actuated valves and dampers, • Work with DCS/PLC engineers to validate control logic, interlocks, and cause & effect., • Assist in tuning control loops and optimising plant performance. Mechanical • Inspect and sign off mechanical completion for FGT systems., • Troubleshoot issues with:, • Conveying systems (lime/AC), • Fans, ductwork, and expansion joints, • Bag filters and ash discharge systems, • Support punch-list closeout and system handover. Safety & Compliance • Ensure all activities comply with:, • Site HSEQ rules, • Permit to Work systems, • Environmental permit limits, • Participate in risk assessments, toolbox talks, and commissioning readiness reviews., • Support emissions compliance testing and optimisation. Documentation & Handover • Produce commissioning reports and test records., • Support development of operating procedures and training materials., • Assist with handover to operations and maintenance teams. Skills & Experience Essential • Degree or HNC/HND in Mechanical, Electrical, C&I, or Process Engineering (or equivalent experience)., • Proven commissioning experience on: EfW, power plants, or large industrial process plants. Strong understanding of: • Flue Gas Treatment systems, • Process control and instrumentation, • Mechanical plant and rotating equipment, • Ability to read and interpret:, • P&IDs, • Electrical schematics, • Control philosophies, • Strong fault-finding and problem-solving skills., • Willingness to work shifts and extended hours during commissioning phases. Desirable • Direct experience commissioning EfW FGT systems., • Knowledge of environmental compliance testing and emissions limits., • Experience with DCS/PLC systems (e.g. Siemens, Valmet, ABB, Emerson, Rockwell)., • COMAH or similar regulated site experience. Personal Attributes • Methodical and safety-focused, • Confident working independently and as part of a multidisciplinary team, • Clear communicator with contractors and operations staff, • Practical, hands-on approach, • Able to remain calm under pressure during critical commissioning phases Package • Competitive Daily Rate, • Opportunity to work on a flagship EfW project

RRxCo is partnered with an exciting and fast-growing Biotech to hire a QA specialist to help bolster their resource. The UK-based business established in 2010 focusing on antibody, protein and peptide drug conjugate medicines and technology. The bioconjugation team was formed in 2011 and moved into a state-of-the-art facility in 2018. The facility has been built for containment; with the safety of their people and the environment in mind, and bespoke laboratories have been designed specifically to accommodate highly potent bioconjugations. Antibody Drug Conjugates combine the cell and tissue specificity of monoclonal antibodies with the cell-killing potential of highly potent small molecules and represent one of the fastest-growing sectors in the oncology field. Summary The Quality Assurance Specialist is responsible for maintaining the quality management systems, ensuring there is adequate QA support for production activities (including batch review), Project support, oversight of material management and approval of materials/ service providers, approval of validation documentation, audit support activities and other QA activities onsite. Deliverables • Responsible for document review (batch documents, logbooks, Protocols, SOPs, forms etc.), • Use Quality systems to ensure compliance (Documentation, Deviation CAPA, Change control etc), • Contributes to supplier quality assurance programme and new supplier qualification., • Supporting and leading quality related investigations, writing investigation reports and initiating/following up on corrective and preventative actions., • Use, support and maintain training systems, training programmes and training documentation., • Proactive administration of the Quality Management systems, metrics/KP! management and trending for Quality., • Works closely with all functions and departments to ensure efficient document review according to cGMP and other regulatory requirements are compliant., • Supports and lead in self-inspections, customer, and regulatory audits., • Is an integral part of the Quality Team, Coach, support and follow values., • Ability to work under pressure and leading Quality based projects., • Support and lead other activities like Data Integrity activities, Quality Risk Management, approving pre and post execution validation documents, Supporting batch release of clinical and commercial bulk drug substance/ API against product specification files., • MHRA and other regulatory guidelines knowledge, • Completion of additional duties reasonable to ensure the efficient running of the QA department. Profile of the individual • Minimum HND Biological subject and have a proven track record in QA in the pharmaceutical industry (or a related industry), • Minimum 5 years' experience in a QA role within either Pharmaceuticals or Biopharmaceutical environment. QA experience of dealing with QC and/or Manufacturing would be advantageous., • Experience using Microsoft Office of programs especially good knowledge in Word, Excel, PowerPoint, and formatting skills., • Knowledge and practical experience of GMP & GLP Systems., • Knowledge and practical experience of Quality systems, Data Integrity, Supplier Management and Quality Risk Management., • Numerical & investigative skills, Coach and support other functions in managing quality issues. Ability to work accurately, with attention to detail in documentation reviews., • Ability to prioritise and deal effectively with a varied workload., • Good communication skills with the ability to form strong working relationships with stakeholders at all levels across the organisation., • Approachable and friendly, with the confidence to constructively challenge results and performance when required. Desirable: • Trained external auditor for external suppliers. Trained trainer, mentor, and coach in Quality., • End to end QA knowledge on pharmaceutical manufacturing knowledge. Excellent technical reports writing skills, advanced Microsoft package skills. Leadership and soft skills proficiency., • Investigational Medicines product knowledge of Manufacturing and QA support.

Monday to Friday Location: Deeside, UK Salary: Competitive, depending on experience + overtime fee (when required) Job Type : Permanent Key Responsibilities - Carry out TIG welding on stainless steel and copper nickel components - Weld thin wall materials to a high standard in various positi

Drivers will be delivering tools and materials to engineers at commercial and residential properties.

This role involves maximizing plant performance through troubleshooting and maintaining manufacturing equipment, while ensuring safety and quality standards are met. A company in the building materials industry is seeking an entry-level Electrical Technician to be part of the maintenance department

We invite you to bring your talent and passion into play as you take an active role in delivering a wide range of interesting projects of different scales, complexities, structural forms and materials within a Top 10 consultancy.If you crave a challenging role but need flexibility and work-life bala

A long-standing marketing firm in the United Kingdom seeks a proactive Marketing Executive for a part-time role (16-25 hours per week) to support their marketing and business development activities. Responsibilities include designing marketing materials, assisting with campaigns, and managing social

A leading aerospace firm in Chester is seeking a Materials Controller/Warehouse Coordinator to manage tooling and parts for maintenance operations. The role involves stock management, calibration of tools, and ensuring availability of materials.

Machine Operator – Chester Area – Permanent Role.A highly automated, fast‑paced manufacturing business within the industrial materials sector is seeking an experienced Machine Operator to join operations at one of its modern production facilities.The company operates multiple sites across Euro

A prominent building materials company is seeking a Senior Sales Person to join their team in Ellesmere Port. The ideal candidate will have a passion for customer service and building materials, with opportunities for on-the-job training and professional development. You'll be responsible for buildi

Architectural Technician A regional house builder have a requirement for an Architectural Technician to join their Design & Technical team to be the liaison between the Technical Department and the site teams on new build housing developments in the region. Architectural Technician role The Design and Technical teams are involved in all aspects of housing design and innovation, this team is also responsible for researching the best materials, at the best cost. As an Architectural Technician you will provide support across all areas of the design, regulation and planning process, working closely with colleagues and third parties to ensure developments are delivered. Duties and responsibilities include: Providing architectural support to a number of different developments. Producing and amend site layouts. Gaining building regulation approvals for allocated developments. Assisting with planning applications Delivering and co-ordinating working drawings. Preparing specifications. Collating and organising technical information. Support provision of technical information for site starts. The investigation of technical problems encountered and provision of viable economical solutions. Attending site meetings as required Experience, Qualifications and Skills Qualified to degree level or HNC/HND in a Construction / Architectural Technology subject with relevant experience Experience of working as an Architectural Technician within the housebuilding sector managing multiple developments Ability to be able to express technical information in a clear and concise manner. Experience of working with Autodesk Revit & AutoCAD is desirable Knowledge of building regulations and current NHBC standards Effective communication and listening skills Excellent attention to detail Good administration skills Works effectively to deadlines and competently works on multiple tasks simultaneously Demonstrate a creative flair and innovative approach to development layouts. Committed to diversity and inclusion What's on offer? The company are offering a competitive salary (dependant on experience), option of a company car or car allowance, fuel card, (electric cars available), 10% bonus, enhanced pension scheme, healthcare, life assurance, etc. The company are also on a growth plan and will have opportunities for career development. If you are ready for your next challenge and would like to apply for the Architectural Technician role, please contact Deena at Fawkes & Reece for a confidential chat or apply via the link TPBN1_UKTJ

Joinery Workshop Operative - Bespoke Manufacturing Location : Chester, CH4 Job Type : Full-Time, Permanent Hours : Monday to Friday, 8:00am - 5:00pm Salary : Negotiable, dependent on experience About JDH Joinery JDH Joinery is a growing bespoke joinery business specialising in high-end, custom-made products. Operating from our 6,000 sq ft workshop, we have a fully equipped machine shop, assembly area, spray shop, and office space. Our work involves a wide range of materials including MDF, laminates, veneers, hardwoods, softwoods, and solid surface materials. We take pride in producing high-quality joinery and are looking for skilled people who share that same attention to detail and passion for craftsmanship. The Role We're looking for an experienced Joinery Workshop Operative to join our workshop team. This is a hands-on role covering all aspects of bespoke joinery production, from machining through to assembly and finishing. Working under the guidance of the Workshop Supervisor, you'll play an important part in delivering high-quality products while helping to keep the workshop running efficiently and safely. Key Responsibilities Operate woodworking machinery including beam saws, CNC routers, edgebanders, and other workshop equipment Assemble bespoke joinery components accurately from drawings and specifications Prepare and finish products to a high standard, including sanding and fitting hardware Carry out quality checks to ensure accuracy, finish, and consistency Select, prepare, and handle materials including hardwoods, softwoods, MDF, laminates, and veneers Maintain a clean, organised, and safe working environment Follow all health & safety procedures and company policies Work closely with the Workshop Supervisor and team members to meet production deadlines Skills & Experience Proven experience in a joinery or woodworking workshop environment Confident using woodworking machinery and hand tools Strong practical joinery and assembly skills with excellent attention to detail Ability to read and interpret technical drawings and job sheets Good understanding of workshop health & safety practices and PPE requirements What We're Looking For A reliable, proactive attitude and strong work ethic Pride in your workmanship and attention to detail Good communication skills and ability to work well within a team Punctual, organised, and capable of meeting deadlines What We Offer Competitive salary based on skills and experience A supportive, friendly, and professional workshop environment Opportunities to develop skills and progress within the business Stable, full-time employment with a growing company TPBN1_UKTJ

Job Title: Senior Womenswear Apparel Designer Location: Chester Salary: Up to £50,000 per annum DOE Company Overview Our client is a fast-growing, design-led consumer brand headquartered in Chester. The business creates technically considered, style-led product for a global customer base. Operating within a highly competitive market, the organisation combines innovation, commercial awareness and strong brand identity to deliver product that resonates with a modern audience. The culture is collaborative, agile and product-focused, with creativity and performance at the centre of decision making. The Role An opportunity has arisen for a Senior Womenswear Apparel Designer to join a growing design function within a fast-paced product environment. Reporting into the Design Director, this role plays a key part in driving seasonal direction across womenswear. You will lead the end-to-end design process across multiple product categories, including core apparel ranges, complementary product lines and associated collections. This is a senior-level position requiring both strong creative vision and technical expertise. You will combine commercial awareness with innovative thinking to deliver brand-aligned, customer-focused product. The role also includes direct line management of a small team, supporting development, progression and fostering a positive, high-performing culture. Key Responsibilities Drive seasonal womenswear design direction using data, customer insight and market research Lead end-to-end design development from concept through to production-ready handover Manage and mentor junior designers, supporting growth and performance Conduct seasonal colour and trend research to inform cohesive ranges Translate global trends into commercially viable, brand-aligned product Undertake functional research to understand end-user needs and product performance requirements Collaborate cross-functionally with Buying, Merchandising, Marketing, Production and Wholesale teams Participate in overseas development trips and competitor benchmarking Prepare detailed tech packs and accurate production-ready artwork Work closely with materials teams to define seasonal fabric and trim direction Key Skills & Experience Minimum 5+ years' experience in apparel design Extensive experience within womenswear design in a product-led environment Experience managing at least one direct report or small team Strong background in technical and commercial product development Advanced proficiency in Adobe Illustrator and Photoshop Strong knowledge of garment construction, pattern cutting and technical fit Solid understanding of the full production process Excellent research capability with the ability to translate insight into product Strong awareness of consumer trends and market positioning Confident communicator able to thrive in a fast-paced environment Domain Experience Womenswear Multi-category apparel Technical product development If you are a commercially minded Senior Womenswear Designer with experience leading small teams and delivering technically considered, customer-focused product, this role offers the opportunity to contribute meaningfully within a growing and ambitious organisation. As an industry leading, nationwide Marketing, Digital, Analytics, IT and Design recruitment agency, we are continually receiving new assignments to work on, so keep a close eye on our website, Facebook, LinkedIn and Twitter pages for a full list of current permanent and interim opportunities as well as marketplace news and fun stuff. Forward Role is operating as an employment agency. TPBN1_UKTJ

Site Mechanical Fitter £30k annual salary + typical overtime earnings of £7k to £10k per annum. Working away allowances are also paid. Do you like overcoming engineering challenges Do you want to improve your skills and knowledge Do you want to be in an environment where your skills and mental health are equally important Do you want the chance to train to be a mechanical supervisor Are you a flexible Team Player and want a flexible working environment Our client delivers Machinery and Services into the Energy from Waste and Paper Manufacturing Sectors and is currently experiencing a period of growth in the Site Services. This role is a permanent position. The new Site Fitter will work alongside the existing team and will be expected to complete jobs from start to finish working alongside a supervisor. Working as part of a team, the Site Fitter will be required to inspect, troubleshoot and repair rotating machinery at customers sites. Duties and responsibilities: Plan and Prepare the Tools and Materials needed to do the job in a timely manner. Take responsibility for ensuring the work is performed to a high standard and on time including activities such as Bearing, shaft and impeller Changes Motor Changes Seal Inspections and changes Internal Inspections (Confined Spaces) Crack Detection/ Inspection Laser Alignment Represent the Company and communicate effectively with Clients and the team Workshop refurbishments of fans and pumps (in house) Identification of spare parts from drawings and parts lists Skills and Experience Required: The following list comprises the ideal skills and experience for the role however all candidates of an appropriate skillset will be considered, and training will be given to bring the successful applicant to the required standard of competency in each area. Fan or Pump Maintenance (or similar rotating machinery) Assembly Work Grinding/ Cutting/ Welding Lifting and Slinging and Overhead crane use FLT / MEWP Training Confined Space Training (Low or Medium Risk) Further Info The majority of the work would be servicing and inspecting Heavy Duty Centrifugal Fans in Energy Recovery Facilities and Stock Pumps in Paper Mills. The work involves both a technical element and physical element and is normally in an industrial setting where adherence to Safe working practices is paramount. The work can sometimes be physically demanding and periodically requires working outdoors and is normally time sensitive. The job often requires working away with overnight stays across most of the UK in the week but rarely at weekends. This equates to typically 6 to 10 nights a month but can vary. Whilst working away there are often longer working hours. They therefore offer very flexible working hours whilst workshop based and pay overtime for additional hours whilst working away as well as allowances for food. Whilst on site the Engineer would be expected to communicate regularly with both their direct supervisor and the Clients representative to update them on the progress of work. This role requires supervision of third-party contractors on site so good written and verbal communication skills are necessary. A positive attitude and a desire to learn would be essential to thrive in this role. TPBN1_UKTJ

We're excited to be recruiting a Site H&S Manager to set the standard and foster a Zero Harm By Choice culture within our production facility in Ellesmere Port! We're keen to attract an H&S individual with a shopfloor or site-oriented Manufacturing background, who adopts a multi-perspective approach to safety, encouraging colleagues to share suggestions and observations, and lead by example in helping to sustain a safe workplace. Job Opportunity Here's an insight into the role! Engaging & Educating Coaching and mentoring Managers on their H&S responsibilities. Helping identify training needs among operational or office-based colleagues. Delivering engaging training and presentations, educating and inspiring the business. Risk & Incident Management Facilitation of risk assessments (general, specific, COSHH, DSE, manual handling, fire, machinery safety) for operations and activities on site, including converting processes (e.g., slitting, winding, packaging, material handling). We will utilise your knowledge and expertise in leading thorough incident investigations, identifying root causes and recommending preventative actions, as well as reporting incidents in a timely manner to internal and external bodies (e.g. RIDDOR where applicable), relying on data records. Management of Change Leading H&S aspects of Management of Change, ensuring risks are assessed and controlled for all significant changes, e.g. the introduction of new production machinery, processes and raw materials. Compliance and Auditing A pivotal part of your role is ensuring compliance with all statutory H&S legislation and requirements, referencing the legal register. You will also assist with internal and external H&S audits, preparing for findings, and responding to these. Company Benefits Company pension Life assurance Sick pay Free company products Free on-site parking Food, retail, holidays, cinema, and gyms discounts Wellness programmes, including Employee Assistance Program and OnDemand GP service Free early access to pay scheme Salary sacrifice schemes Employee referral scheme Essential Skills We are looking for a curious and empathetic leader, an educator with humility, and an empowering communicator. You are conversant in: Implementing and maintaining H&S management systems. Carrying out risk assessments and incident investigations. Managing legal registers and overseeing outsourced specialist risk assessments (e.g., DSEAR, Water Hygiene, Fire). Familiarity with lean manufacturing principles and their integration with health and safety. We're looking for individuals who have attained NEBOSH General Certificate in Occupational Health and Safety as a minimum. Skills we're looking for: Effective translation of technical H&S information into everyday language for stakeholders at all levels. Analytical and problem-solving skills with a data-driven approach. Thorough understanding of UK Health and Safety legislation, integrating this into daily practice. Northwood is a family-owned group of associated companies that provide the manufacturing, supply and transportation of paper hygiene and wiping products for both the away-from-home and consumer market. TPBN1_UKTJ

Apply today to work as a Line Leader for our client a professional yet friendly company who specialise in making and developing chilled meals for the top UK supermarkets. Are you looking to join a fast-growing food production business with great career opportunities? This is a fantastic opportunity to become part of a supportive team and contribute to a growing business that values quality and teamwork. Staffline is recruiting a Line Leader in Wrexham. The rate of pay is: - 4 on 4 off Days - £13.74 per hour, overtime £20.61 per hour - 4 on 4 off Nights - £14.81 per hour, overtime £22.22 per hour This is a full-time role, and the hours of work are: - 4 on 4 off, 6am to 6pm - 4 on 4 off 6pm to 6am Your Time at Work As a Line Leader your responsibility is to care for the staff in your team, to care for the product their team is making. Your main duties include: • Organise a team of operators on a production line to produce the required quality of finished product - People management - motivation, organisation, delegation, leadership - Product knowledge - materials, QAS sheets, line speeds, equipment, etc - Operator training - competent team members in each role, GMP - Continuous monitoring of the team's production - Effective administration of paperwork - process sheets, start-up sheets, etc - Awareness of performance in relation to daily plan (time & quantity) Our Perfect Worker Our perfect worker will be a cheerful, positive team member who understands what is required. You will plan and organise daily work ahead of time. Applicants will be free to monitor all areas and be quick and efficient in line changeovers. Key Information and Benefits - Earn £13.74-£22.22 per hour - Full-time - Company pension - Discounted or free food - Employee discount - Free parking - On-site parking - 1 free meal per shift - Free tea and coffee - Weekly pay - Staff shop - Staff car park - Canteen - Lockers Job Ref: 1OMW About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline. TPBN1_UKTJ

The environment is complex, NPD is constant, and materials decisions have a direct impact on service, waste, and working capital. Candidates without hands-on FMCG manufacturing materials experience will not be considered.

Your new role Working on the largest highways project in the region involving a new 10 mile dual carriageway, we are looking for a Materials Engineer to join the project team.

As a materials controller your role & responsibilities will be: Responsible for all production admin tasks in terms of production materials availabilityPlace purchase orders for materialsCheck incoming material loads on to the company ERP systemManage inventory issues, work closely with suppliers to

LOCATION: UK Home Office BasedSALARY: £50,000 - £60,000 plus company car and generous bonus schemeEstablished and growing chemical distributorSelling to manufacturers of composites, thermoset and masterbatchAble to regularly visit the Head Office and commercial team in Southern EnglandFull UK driv

Company description:Fantastic challenges.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.Were proud to play a par

Internal Sales Executive Building MaterialsJob Title: Internal Sales Executive Building Materials Job reference Number: 756166-5082-2647 Industry Sector: Building Materials, Heavyside Building Products, Civils, Drainage, Hard Landscaping, Insulation, Timber, Joinery, Roofing, Paving, Commercial Pa

Company description:Fantastic challenges.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.Were proud to play a par

Are you an experienced Resistant Materials teacher looking to take the next step in your academic career? We have a fantastic long term opportunity for a February 2026 start at a fantastic secondary schools in the Wakefield area. The role will involve teaching Resistant Materials across Key Stages 3

Materials ControllerLocation - CorwenSalary - £30-£40,000 Join a world-class manufacturing operation who have recently invested in state-of-the-art production tech. We're recruiting a motivated, detail-oriented Materials Controller (or Stock / Inventory Coordinator) to take full ownership of.

Footwear Materials & Product Developer | North West | UK Based | Lifestyle & Performance Business Why This Role Matters:You'll play a pivotal role in shaping an iconic, high-visibility footwear launch-one that redefines innovation, pushes performance boundaries, and sets a new standard for the indus

Type of Role: Contract - ongoing (agency) About the Role: We are seeking a highly organised and detail-focused Materials Controller to join a leading railway infrastructure company. In this key position, you will manage and expedite materials to align

Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets.Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible.Safran h

This position plays a key role in ensuring materials availability for projects and fleets by coordinating purchasing activities, managing inventory records, and providing high-level clerical support to the materials management f. Goole6 months initial

About The RoleJoin the Samworth Brothers Team and become part of our dynamic family!At Samworth Brothers, we genuinely care about our colleagues and strive to create an engaging environment that values your unique contributions.We are committed to your success

Materials Manager This is a hands-on Materials Manager role for someone ready to take broader ownership and improve how a busy manufacturing operation really works. Youll join a fast-paced FMCG manufacturing site with multiple production units and take responsib