Materials jobs in OxfordCrear alertas

GR8 Connect are recruiting for Class 2 Night Drivers for one of our prestige clients in Oxford who are UKs largest provider of water and wastewater solutions and services! Duties • Delivering pipes and materials to sites, • Assisting with loading and unloading, • Physically fit and healthy as manual work will be required Shifts • 4 on 4 off, • Overtime available, • Guaranteed 8hrs paid, • 8hrs to 14hr shifts, • Ongoing long-term... ZIPC1_UKTJ

Senior Buyer / Purchasing Manager Location: Oxford Airport Hours: Full-time 08:0016:30 Salary: £40,000£45,000 per annum Role Purpose As the Senior Buyer / Purchasing Manager you will take ownership of the sourcing, negotiation, procurement and supply-chain activities for aircraft components, spares and associated materials. You will build and manage supplier relationships (including new supplier onbo... ZIPC1_UKTJ

Senior Quality Control Specialist (Senior QC) Location: Oxford, UK Department: Quality, Quality Control Reporting to: Manager, Quality Type: Full-time, permanent About the role We are looking for a Senior Quality Control Specialist to join our Quality Control team based in Oxford. This is a hands-on senior laboratory role with strong quality system ownership. You will lead day-to-day QC activities, act as a subject matter expert for methods, products, and equipment, and drive high standards in cGMP compliance, data integrity, and right-first-time documentation You will support routine testing (incoming materials and finished products) and contribute to new product development work where required, helping assess physical and chemical properties and their impact on final products. Key responsibilities QC operations and delivery • Lead the running of QC laboratory activities, plan workloads, balance priorities, and ensure on-time testing and documentation., • Generate high-quality results and documents within agreed timelines, using approved procedures and validated systems. Technical leadership and compliance • Act as SME for assigned methods, products, and equipment; provide guidance on execution, troubleshooting, and suitability., • Ensure activities comply with cGMP, data integrity principles, Summit procedures, and VMD ManSA requirements., • Approve or author controlled documents within delegated authority, including SOPs, test methods, specifications, logbooks, CoAs, and quality reports. Quality system ownership, end-to-end • Lead deviations and incidents; perform root cause analysis, risk assessments, CAPA definition and implementation, effectiveness checks, and on-time closure., • Lead OOS, OOT, and laboratory investigation work; coordinate testing and ensure compliant conclusions and narratives., • Own CAPA and change controls related to methods, equipment, materials, and processes; complete impact assessments, coordinate validation and training, implement and close changes. Training, coaching, and leadership • Lead onboarding and ongoing training for QC personnel, build training matrices, assess competence, and coach analysts in technique and documentation., • Deliver refresher training on cGMP, data integrity, and investigation quality, tailored to trends and audit findings. Validation, equipment, and audits • Support or lead method verification and validation work, including protocol review, execution, data review, and reporting., • Oversee equipment qualification and maintenance activities (IQ, OQ, PQ), calibration, PM, and out-of-service controls where required., • Host and support internal, external, and regulatory audits/inspections; present data clearly and own responses and follow-ups. What we’re looking for Essential • Degree (or equivalent) in a science discipline., • Strong experience in a cGMP QC laboratory environment, with the ability to work independently and make sound decisions with minimal supervision., • Excellent knowledge of Good Manufacturing Practice and Good Documentation Practice, with a clear commitment to data integrity., • Proven capability leading investigations (deviations, OOS/OOT) and delivering effective CAPAs and risk assessments., • Strong communication skills; clear, timely written and verbal communication appropriate to the audience., • Working knowledge of Waters Empower (HPLC), plus broader chromatography experience., • Experience supporting method validation/verification and equipment qualification activities., • Audit hosting experience, and confidence presenting QC data and investigation narratives. What we offer • Competitive salary, dependent on experience., • Competitive contributory pension and a comprehensive benefits package., • A varied role with real ownership, impact, and development opportunities within Quality and across the business. How to apply If you are interested in this role, please send an updated CV and a short note highlighting your relevant QC experience

An optical technology company based in Oxfordshire is seeking an experienced Mechanisms Engineer to join its growing R&D team. The successful candidate will apply their expertise in micro-mechanisms to design and develop precision components for the company’s novel optical platform. This is an exciting opportunity for a hands-on, creative mechanical/mechanisms engineer to play a key role in the development of a next-generation adaptive lens technology set to transform the way we see the world. About the Company This company’s expertise sits at the intersection of ophthalmics and optics. They develop novel ophthalmic solutions for use across optical systems, AR/VR/XR, and machine vision applications. Recognised as trusted experts in adaptive lens technology, they partner with leading global consumer electronics and technology companies to develop new solutions that optimise how we see the world. The company has developed a novel adaptive lens system that has the potential to transform visual performance in modern AR/VR/XR technologies. This breakthrough has generated significant interest across the consumer technology sector. As a result, the company is now entering the next phase of its R&D programme, scaling its technical capabilities and seeking talented engineers to join the team. This is an excellent opportunity to join a fast-growing technology company, contribute to cutting-edge R&D, and play a key role in the development of a new technology with global impact. Above all, it is an outstanding place to work, combining innovation, collaboration, and technical excellence. The Role This is an exciting period of investment and growth. The company is scaling its team and facilities to support ambitious R&D activities and is seeking an experienced Miro-Mechanisms Engineer specialising in the design and development of micro-mechanisms (e.g. micro bearings, threads, gears, and linkages), on a watch level component scale (or smaller). You will play a key role in the development of the company’s novel lens system, contributing from early concept through to production. Key Responsibilities The Mechanisms Engineer will: • Design and develop micro-mechanisms for precision optical applications, • Integrate micro-mechanisms into the company’s optical systems, • Be hands on, designing, building and testing prototypes to support iterating designs., • Provide expertise in materials selection, • Advise on best-practice manufacturing techniques, • Liaise with suppliers for the provision and manufacture of mechanisms Requirements Education Essential • Proven experience taking product concepts through to production, including design iteration, refinement, and design for manufacturing and assembly (DFX) considerations, • Experience designing micro-mechanisms, • Solid understanding of:, • Injection moulding, • Micro-moulding, • Metal stamping and forming, • Metal injection moulding, • Vacuum forming, • Knowledge of common joining processes, including:, • Adhesive bonding, • Ultrasonic welding, • Radio-frequency welding, • Heat staking, • A flair for rapid concept generation and ideation, • Strong knowledge of materials and their properties, particularly polymers and metals, • Proficiency in CAD (essential), ideally SolidWorks, • Knowledge of, and ability to work to, ISO 13485 (medical device compliance), including documentation, standards adherence, and design-for-risk-management Desirable • Competence in Geometric Dimensioning & Tolerancing (GD&T) and proficient in undertaking and documenting tolerance analysis., • Experience or exposure to optics or opto-mechanical engineering, including alignment considerations, optical component mounting, or light-path constraints, • Practical experience with Finite Element Analysis (FEA) and/or the ability to perform hand calculations, • Ability to translate product requirements into clear, complete engineering specifications, • Experience taking designs into pilot production and optimising them for scalable manufacture, • Knowledge of, and ability to work to, ISO 13485 (medical device compliance), including documentation, standards adherence, and design-for-risk-management

Software Automation Engineer Do you want to help build the next generation of autonomous lab platforms? This role focuses on creating the automation backbone behind next-generation lab and robotics platforms. You’ll work at the intersection of instruments, robots, firmware, and software - building the integrations and workflows that enable true autonomous experimentation. Expect a mix of device-level engineering, system-wide architecture, and hands-on problem solving. If you enjoy connecting hardware, software, and clever engineering to build systems that run themselves, you’ll fit right in. What You’ll Be Doing: • Developing automated workflows that turn complex experimental steps into structured, repeatable software protocols using robotics, • Integrate lab hardware and software, exposing firmware capabilities through clean, standard interfaces., • Contribute to system architecture design to ensure high reliability, monitoring, and performance across all automation platforms., • Break systems down, understand them deeply, and reimagine how they can be used to create innovative solutions., • Collaborate with scientific, technical, and operational colleagues to ensure automation meets real-world needs., • Evaluate new tools and technologies with external vendors and integrate them into existing workflows. What We’re Looking For: • Experience in automation engineering, robotics, biotech, or industrial systems integration., • Proven track record of designing and deploying robust automation systems, including multi-device orchestration., • Skilled in firmware-level control, driver development, and exposing device capabilities through APIs., • Strong programming skills in Python and C/C++., • Experienced in software best practices: version control, PR reviews, documentation, and efficient workflows., • A creative thinker - able to design automation that goes beyond simply replicating human tasks. Nice to Have: • Relevant degree in Engineering, Computer Science, Robotics, or similar., • Familiarity with open-source automation libraries, such as PyLabRobot., • Experience creating digital twins or virtual representations of lab devices., • Background in biotech, pharma, materials science, or other R&D areas that rely heavily on automation. Offices and Lab located in Oxford. Hybrid working c.3 days in office Competitive salary + benefits dependent on experience. Ready to help build the next generation of intelligent robots? Apply now and join a fast-moving team shaping the future of applied robotics and AI.

An optical technology company based in Oxfordshire is seeking an experienced Process Engineer with a strong background in process development to join its growing R&D team. The successful candidate will apply their expertise to validate, characterise, and scale manufacturing processes for the production of complex ophthalmic systems. This is an exciting opportunity for a hands-on, creative Process Engineer to play a key role in the development of a next-generation adaptive lens technology set to transform the way we see the world. About the Company This company’s expertise sits at the intersection of ophthalmics and optics. They develop novel ophthalmic solutions for use across optical systems, AR/VR/XR, and machine vision applications. Recognised as trusted experts in adaptive lens technology, they partner with leading global consumer electronics and technology companies to develop new solutions that optimise how we see the world. The company has developed a novel adaptive lens system that has the potential to transform visual performance in modern AR/VR/XR technologies. This breakthrough has generated significant interest across the consumer technology sector. As a result, the company is now entering the next phase of its R&D programme, scaling its technical capabilities and seeking talented engineers to join the team. This is an excellent opportunity to join a fast-growing technology company, contribute to cutting-edge R&D, and play a key role in the development of a new technology with global impact. Above all, it is an outstanding place to work, combining innovation, collaboration, and technical excellence. The Role This is an exciting period of investment and growth. The company is scaling its team and facilities to support ambitious R&D activities. A key investment is a brand-new cleanroom pilot manufacturing line, enabling the transition from laboratory-scale development to prototype production. This pilot line represents the first stage of the manufacturing strategy, with a clear roadmap toward high-volume manufacturing in the future. As a Process Engineer, you will join a newly formed Production Team responsible for transferring processes from the R&D laboratory into the pilot manufacturing environment. You will characterise, optimise, scale, and validate the R&D team’s unique ophthalmic production processes, ensuring they are robust, repeatable, and scalable. As this is a completely new optical system, the role requires a high degree of creativity, along with a proactive, hands-on engineering approach to developing novel and often complex production processes. Key Responsibilities The Process Engineer will: • Test and characterise manufacturing processes, • Failure root cause analysis, solve reoccurring failures within manufacturing processes, • Write and maintain Standard Operating Procedures (SOPs), • Validate SOPs and associated manufacturing equipment, • Design jigs and fixtures to support manufacturing processes, • Specify, scope, and/or design equipment for scaled manufacturing Requirements Education Essential • Experience developing novel assembly or production processes, • Experience in production process validation, • Proven ability to write clear, concise SOPs, • Experience in identifying and solving problems in reliability and repeatability of manufacturing processes., • Knowledge of, and ability to work to, in a regulated industry), including documentation, standards adherence, and design-for-risk-management Desirable • Solid understanding of some of the following processes:, • Heat curing, • Optical-grade coating, • Volumetric and pressurised fluid dispensing, • Micro-moulding, • Knowledge of common polymer joining processes, including:, • Adhesive bonding, • Ultrasonic welding, • Radio-frequency welding, • Heat staking, • ISO 13485 (medical device compliance), • Experience in optical testing (ISO 8980), • Experience with automation of electro-pneumatic equipment and basic coding or control systems exposure

An innovative optical technology company based in Oxfordshire is seeking an experienced Mechanical Systems Engineer to join its growing R&D team. This role will focus on the architecture, integration, and system-level design of a novel adaptive optical platform. You will work across mechanical, optical, and analytical disciplines to ensure that complex mechanical systems, sub-systems, and mechanisms come together into a robust, high-performance product. This is a unique opportunity to contribute to a next-generation lens technology that is set to transform the way we see the world. About the Company This company’s expertise sits at the intersection of ophthalmics and optics. They develop novel ophthalmic solutions for use across optical systems, AR/VR/XR, and machine vision applications. Recognised as trusted experts in adaptive lens technology, they partner with leading global consumer electronics and technology companies to develop new solutions that optimise how we see the world. The company has developed a novel adaptive lens system that has the potential to transform visual performance in modern AR/VR/XR technologies. This breakthrough has generated significant interest across the consumer technology sector. As a result, the company is now entering the next phase of its R&D programme, scaling its technical capabilities and seeking talented engineers to join the team. This is an excellent opportunity to join a fast-growing technology company, contribute to cutting-edge R&D, and play a key role in the development of a new technology with global impact. Above all, it is an outstanding place to work, combining innovation, collaboration, and technical excellence. The Role This is an exciting period of investment and growth. The company is scaling its team and facilities to support ambitious R&D programmes and is seeking a Mechanical Systems Engineer with a strong background in system architecture, integration, and verification. You will take ownership of overseeing the lifecycle of the mechanical systems, ensuring that they integrate seamlessly with one another. Working closely with mechanical design engineers, optical engineers and finite analysis engineers, you will bridge the teams; managing requirements, analysing and mitigating technical risks, and trace the system requirement through to the final product. Ultimately translating the user and stakeholder needs into technical specifications to help deliver well-integrated, reliable products and manufacturing solutions. Key Responsibilities The Mechanical Systems Engineer will: • Define and own the mechanical system architecture for the company’s adaptive lens platform, • Define, document and trace system requirements, from user and stakeholder requirements into clear mechanical specifications and the final product., • Lead the integration of sub-systems, mechanisms, and components into a cohesive mechanical system, • Act as the primary interface between design, analysis, optics, and manufacturing teams, • Ensure system-level considerations are correctly defined, • Identify, analyse and help lead technical mitigations., • Support system verification and validation, including test planning and interpretation of results, • Provide guidance on materials selection and manufacturing strategies at a system level, • Contribute to design reviews and technical decision-making across the programme Requirements Education Essential • Proven experience of taking a holistic view in delivering complex mechanical systems from concept through to production, • Strong understanding of mechanical system architecture, interfaces, and integration, • Proven experience in identifying, analysing, and mitigating technical risks throughout the product development lifecycle (e.g. dFMEA)., • Experience working with precision assemblies containing mechanisms and moving parts, • You will have, and be able to demonstrate, a broad knowledge and experience of manufacturing processes, joining techniques and assembly methods., • Strong knowledge of materials and their properties, particularly polymers and metals, • Proficiency in CAD (essential), ideally SolidWorks, • Experience working within regulated product development environments, ideally ISO 13485, including documentation and design-for-risk-management Desirable • Solid knowledge of tolerance analysis, stack-ups, and GD&T at a system level, • Experience in opto-mechanical systems, including optical alignment, mounting strategies, and sensitivity to tolerances, • Exposure to systems engineering methodologies, including requirements management and verification planning, • Practical experience with FEA or the ability to critically assess analysis outputs, • Experience supporting pilot builds and transition to scalable manufacture, • Ability to balance technical detail with big-picture system thinking, • A flair for problem-solving, concept generation, and structured decision-making

Area Sales Manager – Diamond Cutting & Drilling Tools Industry Sector: Building Products, Building Materials, Hand Tools, Tools, DIY Sheds, DIT Stores, Screwfix, B&Q, Tool Distributors, Distributors, Builders Merchants, Independent Merchants, Buying Groups, Plumbing & Heating Merchants, Tools

Field Service Engineer - FLT and MHE. I am currently partnering with a market leading materials handling business that are currently looking to recruit an experienced field service engineer to service and maintain Forklift Trucks and other MHE equipment across customer sites. As a Field Service Engi

We are currently looking for an experienced Injection Moulding Setter to join the production team for a manufacturer in Kidlington.Injection Moulding Setter Job Overview.Prepare in advance for production changeovers by ensuring all necessary tools, materials, and equipment are ready.Carry out safe m

Position: Senior Design Engineer - CATIA.Senior Design Engineer required for a well-established and industry engineering consultancy based in the Oxford area.It is anticipated the successful candidate will have a strong knowledge of composite materials and CATIA software.Senior Design Engineer Job O

Are you looking to kickstart your career in supply chain and purchasing? This is an exciting opportunity to join a dynamic industrial business unit as a.Youll play a key role in ensuring that products and raw materials are always available supporting both production and sales operations.Youll work c

An optical technology company based in Oxfordshire is seeking an experienced Mechanical Engineer with a strong background in tooling and fixture design and development to join its growing R&D team. The successful candidate will apply their expertise to design and fabricate first-of-their-kind prototypes for the company’s novel optical platform. This is an exciting opportunity for a hands-on, creative Mechanical Engineer with a strong background in Design for Manufacture and Assembly (DFX) to play a key role in the development of a next-generation adaptive lens technology set to transform the way we see the world. About the Company This company’s expertise sits at the intersection of ophthalmics and optics. They develop novel ophthalmic solutions for use across optical systems, AR/VR/XR, and machine vision applications. Recognised as trusted experts in adaptive lens technology, they partner with leading global consumer electronics and technology companies to develop new solutions that optimise how we see the world. The company has developed a novel adaptive lens system that has the potential to transform visual performance in modern AR/VR/XR technologies. This breakthrough has generated significant interest across the consumer technology sector. As a result, the company is now entering the next phase of its R&D programme, scaling its technical capabilities and seeking talented engineers to join the team. This is an excellent opportunity to join a fast-growing technology company, contribute to cutting-edge R&D, and play a key role in the development of a new technology with global impact. Above all, it is an outstanding place to work, combining innovation, collaboration, and technical excellence. The Role This is an exciting period of investment and growth. The company is scaling its team and facilities to support ambitious R&D activities and is seeking an experienced Mechanical Engineer to design and develop the tooling and fixtures required for the assembly of its brand-new optical platform. You will be a key contributor, working closely with the Design and Production teams to develop critical equipment that supports the assembly of novel prototypes. As this is a completely new optical system, the role requires a high degree of creativity, with responsibility for developing first-of-their-kind assembly equipment and production processes. Key Responsibilities The Mechanical Engineer will: • Design and develop tooling and fixturing, • Provide expertise in Design for Manufacture and Assembly (DFX), • Contribute to the development of novel assembly and production processes, • Liaise with suppliers for the provision and manufacture of parts Requirements Education Essential • Proven experience taking product concepts through to production, including design iteration, refinement, and DFX considerations, • Experience in the design and development of jigs, tooling, and fixtures, • Experience developing novel assembly and production processes, • Solid understanding of:, • Machining processes (e.g. CNC, lathes & milling), • Injection moulding, • Micro-moulding, • Metal stamping and forming, • Metal injection moulding, • Vacuum forming, • Knowledge of common joining processes, including:, • Adhesive bonding, • Ultrasonic welding, • Radio-frequency welding, • Heat staking, • Strong knowledge of materials and their properties, particularly polymers and metals, • Proficiency in CAD (essential), ideally SolidWorks, • Skilled and experienced at using mills and lathes to facilitate machining or modifying tooling and fixtures in-house as required., • A flair for concept generation and ideation and ability to work and iterate designs at a quickly. Desirable • Competence in Geometric Dimensioning & Tolerancing (GD&T), • Experience or exposure to optics or opto-mechanical engineering, including alignment considerations, optical component mounting, or light-path constraints, • Experience taking designs into pilot production and optimising them for scalable manufacture, • Knowledge of, and ability to work to, ISO 13485 (medical device compliance), including documentation, standards adherence, and design-for-risk-management

Our Offering • Salary: £60-84k (depending on skills & experience), • Annual Leave: 25 days + bank holidays, • 1 additional day of leave earned per year (max 5 days), • 5% Pension contribution, • Private Health Insurance (incl. Mental Health), • Life insurance, • Annual leave rollover (up to 5 days per year), • Company stock option scheme, • £50/month towards wellbeing, • £3,000 annual personal development and training budget, • £500 annual contribution to nursery, • Paid paternity/maternity leave scheme, • Catered lunch on Fridays, • Up to £1,000 relocation contribution About LUX LUX is an exciting start-up daring to disrupt existing industry norms and take the lead in revolutionising the approach to Liquid Hydrogen. We are based in Oxfordshire, the centre of Cryogenics R&D in the UK, ideally located for developing our unique Clean ‘Green’ liquid Hydrogen technology. LUX is currently developing the technology to ultimately supply our customers with Clean liquid Hydrogen on-site-on-demand. We are scaling at pace, raising significant grant funding and private investment. LUX embraces new technologies, processes & methods at the core of our engineering approach. We have a welcome approach to taking risks and believe that learning from failure and iterative testing achieves the best results. Our ethos is one of informed ideation, focussed risk-taking and passion for change. LUX is seeking candidates who are enthused by the idea of defining new possibilities in engineering Hydrogen liquefaction systems. We are offering candidates an opportunity to work on the cutting edge of liquid Hydrogen innovations, and be fairly rewarded for their time, effort and skills. We are growing fast and we make decisions quickly. If you feel this could be the journey for you, we would like to hear from you. Role As a Senior Mechanical Design Engineer, you will be leading LUX’s core technology design and development on a range of projects and tasks. You will be working with other team members such as project managers, and senior leadership, in addition to external suppliers, to ensure that projects are delivered successfully. The role requires applying your skills and knowledge across a broad range of problems and challenges, sourcing alternative solutions independently and efficiently Responsibilities • ‘Cradle to grave’ Design and development of mechanical systems and components for various projects, • Create detailed parts/models and assemblies, using CAD software (Siemens NX), • Ensure Design for Manufacture is implemented into design solutions, • Produce engineering drawings working to BS8888 following engineering best practice, • Conduct tolerance stack analyses for components and assemblies, • Collaborate with team members and external suppliers to ensure design specifications are met, • Perform system design and integration, including the selection of appropriate components and materials, • Create P&IDs for various test rigs, sub-systems, systems and testing purposes, • Perform basic hand calculations to support design process e.g. bending moments, hoop/axial stress etc, • Conduct and support risk assessments for engineering development and testing needs, • Perform basic simulations to assess design integrity and performance assessments, such as low-level FEA to verify, • hand-calculations etc, • Conduct testing and validation of components to ensure functionality and reliability of mechanical designs, • Provide technical support and guidance to junior designers and engineers, • Identify and resolve design issues using first principles thinking Essential Qualifications, Skills & Experience • Bachelor’s degree in an engineering or related STEM discipline, OR, additional 2+ years of professional experience in design engineering roles, • Minimum 5 years relevant experience in mechanical design engineering roles, • Experienced with Siemens NX CAD software, including part & assembly design, and drafting, • Ability to create detailed schematics and technical drawings, • Strong mechanical knowledge and understanding of engineering principles, • Extensive experience with Geometric Dimensioning and Tolerancing (GD&T) and performing tolerance stack analysis, • Experience with NX surfacing, • Note you must have a valid UK driving licence and a suitable vehicle for business-related travel as part of the role Preferred Qualifications, Skills & Experience • Masters degree or higher in Mechanical engineering or related STEM discipline, • 7+ years’ relevant experience in mechanical design engineering roles, • Expert user in Siemens NX CAD software, including part & assembly design, surfacing, and drafting, • Experience in pressure vessel sizing, design and development projects, • Experience in valve design, selection, and development projects, • Proficient in one or more coding languages, • Excellent problem-solving skills with a focus on first principles thinking, • Strong communication skills to effectively collaborate with team members and external suppliers, • Experienced in designing a diverse range of mechanical components, systems and projects, • Familiar with Hydrogen related design principles and engineering, • Experienced/knowledgeable in advanced manufacturing processes such as Additive Manufacturing (3D Printing), • Experience in cryogenic engineering projects, • Strong evidence of technical problem solving Application To apply, please email your covering lettering and CV to and ensure to provide the details and contact information for two professional references in your application. Please do not apply via LinkedIn. Please state if you require a visa/sponsorship to work in the UK. Please quote the following reference number in your email subject: LUX-C3 Message to Recruiters: LUX will not accept contact or applications for this role through recruitment agents/agencies.

One Way are looking for 5x labourers to start on a soft stirp out job in Milton Park, Abingdon.To be considered for this role youll require;.Duties are to include but not limited to; lifting and shifting materials into skips, moving rubble, materials and all other associated tasks.Attractive hourly

GR8 Connect are recruiting for Class 2 Drivers for one of our prestige clients in Oxford who are UKs largest provider of water and wastewater solutions and services!.Delivering pipes and materials to sites.Assisting with loading and unloading.Physically fit and healthy as manual work will be require

Join a cutting-edge engineering organisation at the forefront of advanced manufacturing and propulsion technologies.With a global footprint and a strong UK base, this venture-backed company is pioneering the development of high-performance microturbine engines using proprietary materials and additi

Utilising colour-coded cleaning materials to prevent cross-contamination. Following strict cleaning protocols in line with infection prevention guidelines.

Machine Learning Engineer - AI for Advanced Materials - Oxford.

OXB is a quality and innovation-led viral vector CDMO that enables its clients to deliver life-changing therapies to patients around the world.

Head of Fundraising We are seeking an experienced fundraising professional with a strong track record of securing major gifts to lead and deliver a high value global fundraising strategy that supports ambitious scientific and conservation programmes. Position: Head of Fundraising Salary: £70,000 plus, depending on experience Location: Hybrid, with weekly Oxford presence and some international travel Hours: Full time Contract: Initial 2 year fixed term, full time employment (with extension opportunities) Closing date: 19 January 2026, with early applications recommended About the Role This is a senior post responsible for designing and delivering a multi-year fundraising strategy focused on major donors, high net worth individuals and philanthropic foundations. You will play a central part in securing significant multi-year commitments that enable large scale expedition, research, and public engagement programmes. Key responsibilities include: • Leading the development and execution of a major giving and philanthropic strategy, • Building and managing a robust income pipeline with clear revenue targets, • Identifying, cultivating and stewarding prospects capable of six and seven figure gifts, • Developing compelling proposals, cases for support and tailored donor materials, • Providing strategic support and briefing for senior leadership fundraising activity, • Maintaining strong donor stewardship through high quality communication and reporting, • Working collaboratively with scientific, operations and finance teams to align funding needs About You You will be a confident and credible fundraiser with a strong understanding of major gifts and donor relations. You’ll bring: • A proven track record of securing six and seven figure gifts, • Experience managing international donor relationships, • Excellent written and verbal communication skills, able to translate complex information into compelling narratives, • A strategic mindset with the drive and initiative to lead and deliver income growth, • Ability and willingness to travel internationally as required, • Experience in conservation, scientific research or biodiversity fundraising is welcomed, along with a wider understanding of global philanthropic networks. Other roles you may have experience of could include: Director of Development, Major Donor Lead, Philanthropy Manager, Head of Partnerships, Senior Development Manager, Foundation Relations Lead, Global Giving Manager. #INDNFP PLEASE NOTE: This role is being advertised by NFP People on behalf of the organization.

We are looking for an enthusiastic person who is looking to learn the skills needed to develop a career as a forklift engineer. This apprenticeship role is an excellent opportunity to combine on the job working, excellent training and development and the opportunity to work for the worlds No 1 forklift truck and materials handling manufacturer. About the role The role involves learning the skills t...

We are currently looking for an experienced Injection Moulding Setter to join the production team for a manufacturer in Kidlington.Injection Moulding Setter Job Overview Prepare in advance for production changeovers by ensuring all necessary tools, materials, and equipment are ready.Carry out safe

OXB is a quality and innovation-led viral vector CDMO that enables its clients to deliver life-changing therapies to patients around the world. These capabilities are supported by robust quality-assurance systems, analytical methods and depth of regulatory expertise.

Area Sales Manager – Plumbing & Heating Tools Job Title: Business Development Manager – Diamond Cutting & Drilling Tools Industry Sector: Building Products, Building Materials, Hand Tools, Tools, DIY Sheds, DIT Stores, Screwfix, B&Q, Tool Distributors, Distributors, Builders Merchants,

JMC Aviation are working with an MRO company based in Brize Norton, looking to recruit a new Aircraft Mechanic to join their team. This client is a specialist in the provision of heavy C & D maintenance checks, bridging checks and major modifications. They provide services to airlines, leasing companies and VIP customers worldwide from strategic locations and are supported by extensive in-house shop capabilities as well as materials and logistics services. The company’s culture of developing their staff is a key strategic pillar for the business as they continually invest in training programmes to support development and growth, ensuring that training is provided to exacting standards with a range of skills to enhance flexibility. This vacancy is available due to growth within the organisation. This is a Permanent Position based in Brize Norton 5/5/4 shift working 7-7 Salary and Benefits • Competitive Salary, • 20 days Annual Leave with additional, • Maternity, Paternity and Parental Leave, • Flexi/Time in Lieu Options, • Compassionate Leave, • Employee Assistance Programme, • Employee Sick Pay Scheme, • Healthcare Contribution, • 5% Employer Contribution to Pension Scheme, • 2x Life Assurance, • Employee Discounts/Travel Concessions The Role The role of the unlicensed Aircraft Engineer required to perform aircraft maintenance tasks in accordance with Technical Documentation & Company Procedures. Other Duties Involve • Carry out aircraft maintenance tasks as directed by their Hangar Foreman, SLE or LE, providing assistance to other staff (any trade) to ensure safe and effective working practices., • • Ensure you are booked to task and to advise Hangar Foreman if additional time is required to complete a task., • Carry out movement of heavy equipment, tooling and spares around the site. This may involve the use of forklift (training will be provided)., • Assist with aircraft cleaning., • Maintain a clean working environment around the aircraft and facilities., • Carry out servicing of aircraft toilets on aircraft in maintenance., • Contain any fuel and/or oil spillage., • Assist with aircraft manoeuvring requirements., • Ensure all waste products are separated and recycled as necessary., • Ensure the scissor lifts are on charge at the end of their shift and ensure battery servicing is carried out., • Ensure all AAGDS vehicles are clean and tidy and all fluid levels checked., • Address and report any safety concerns immediately., • Ensure that equipment is maintained in a serviceable, clean, tidy and safe condition, reporting any faulty equipment immediately using the correct channels., • Carry out additional team responsibilities or any other reasonable request from your Hangar Foreman, SLE, LE or Hangar Management Team., • To recommend to the SLE any improvements that may increase safety and/or efficiency., • Carry out any reasonable request to carry out offsite support e.g. AOG, Line., • Remain up to date with all Read & Sign notices. Health and Safety In order to be successful in this role the Aircraft Mechanic will need to demonstrate the following skills and attributes • Aircraft experience (or in a comparable industry) or recognised aircraft apprenticeship, • Has had Competency Assessment completed and is at a satisfactory level., • Ability to work effectively in a team., • Ability to work unsupervised when required to do so., • Good awareness of Aviation safety., • Good communication skills., • Able to operate a powerset (GPU) If you think this is the role for you and you have the necessary skills and attributes, please apply today or contact JMC Aviation for more details. Please note that due to the high level of applicants we will only be contacting shortlisted candidates regarding this role. For this opportunity JMC Aviation Ltd is acting as an employment agency.

Role: Injection Moulding Setter Location: Kidlington Salary: £45,000 Shift: Continental shift: 4-On, 4-Off, 12-hour rotating days and nights. Omega is working with a leading manufacturing company, seeking an experienced Injection Moulding Setter to join their production team based in Kidlington. This is an excellent opportunity to join a global organisation known for delivering essential industrial components across a wide range of sectors. Responsibilities – Injection Moulding Setter • Prepare for production changes by ensuring all required tools, materials, and equipment are available for efficient changeovers., • Safely shut down machines at the end of production runs, following all safe systems of work (SSOWs)., • Safely remove and install moulds, ensuring all installations are completed accurately and to safety standards., • Complete production documentation and daily performance reports accurately., • Lead by example in promoting high standards of safety, quality, and productivity., • Optimise processes to achieve and exceed target cycle times and quality expectations., • Monitor machine settings and ensure they are appropriately configured to maintain safe, repeatable processes., • Respond quickly to machine-related issues, resolving any quality, uptime, or safety concerns., • Identify and implement process improvements to support efficiency, quality, and safety., • Conduct weekly machine fitness for use checks and ensure all records are maintained., • Support continuous improvement initiatives including SMED, TPM, material recycling, and automation., • Maintain a clean, safe, and organised working environment. Requirements – Injection Moulding Setter • Proven experience working as an Injection Moulding Setter is essential., • Formal qualifications in Injection Moulding Setting and Processing., • Experience using cranes, lifting, slinging equipment, and powered pallet trucks (PPT)., • Strong communication skills across all levels of the organisation., • Ability to remain calm under pressure and deliver results against deadlines., • Team player with a flexible and proactive approach., • IMT qualification is desirable. Benefits – Injection Moulding Setter • Competitive basic salary plus shift allowance., • Discretionary bonus scheme., • Up to 5% matched pension contribution., • Life assurance – 4x annual salary., • 20 days annual leave., • Employee discount schemes., • Eyecare vouchers., • Cycle to work scheme., • UK Sharesave scheme., • Training and development opportunities., • Free onsite parking. For further details, please contact Kieren Provis – 01453 829776 or email your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors, and Laboratory Technicians to name but a few. For details of other opportunities available within your chosen field, please visit our website:

An established life sciences organisation is seeking an experienced Clinical Quality Assurance (GCP) professional to support and oversee quality activities across clinical development programmes. Reporting into senior Quality leadership, this role is responsible for ensuring clinical trials are conducted in compliance with applicable regulatory requirements, ICH GCP guidelines, and internal quality systems. The position plays a key role in maintaining and continuously improving the GCP quality system, leading audit activities, supporting regulatory inspections, and driving inspection readiness across clinical teams to ensure a state of continuous compliance. Key Responsibilities • Act as the GCP Quality subject matter expert, providing compliance guidance and QA support to assigned clinical teams, • Contribute to the development, implementation, and continuous improvement of GCP-related components of the Quality Management System (QMS), • Support qualification and ongoing oversight of GCP service providers, including due diligence assessments and vendor performance reviews, • Plan, schedule, and conduct GCP audits (investigator sites, CROs, laboratories, and internal systems) in line with the approved audit programme, • Lead and coordinate inspection readiness activities across clinical functions, • Support preparation, conduct, and follow-up of GCP regulatory inspections (e.g. FDA, EMA, MHRA), • Author and manage GCP QA documentation, including deviations, CAPAs, and change controls, • Track and monitor CAPAs to closure, including effectiveness checks, • Develop, review, and maintain SOPs, policies, work instructions, and training materials, • Support wider quality initiatives and continuous improvement activities as required Experience, Knowledge & Technical Skills • Extensive experience in Clinical Quality Assurance (GCP), • Hands-on experience managing deviations, CAPAs, change controls, and electronic quality systems, • Strong working knowledge of ICH GCP and global regulatory requirements (FDA, EMA, MHRA), • Qualified and experienced GCP auditor, with experience auditing investigator sites, vendors, and systems, • Solid understanding of clinical trial operations and documentation standards across the trial lifecycle, • Experience supporting or participating in regulatory authority inspections, • Proven ability to write, review, and maintain SOPs and controlled quality documents, • Proficient with Microsoft Office and electronic systems such as eQMS, eDMS, LMS, and eTMF, • Willingness to travel domestically and internationally (approximately 10–20%) Key Competencies & Behaviours • Strong attention to detail with a high level of accuracy and quality focus, • Demonstrates integrity, ethical judgement, and a strong compliance mindset, • Highly organised, adaptable, and able to manage multiple priorities, • Effective problem solver with strong investigation and report-writing skills, • Excellent written and verbal communication skills, • Able to influence and collaborate with cross-functional and global stakeholders, • Comfortable operating in a fast-paced, evolving environment If interested, please apply below or send your application to We are an equal opportunities Recruitment Business and Agency. We welcome applications from all suitably qualified candidates regardless of their race, sex, disability, religion/belief, sexual orientation or age.

Our purpose at CloudHQ is to provide flexible, efficient, and resilient data center solutions to businesses of all sizes. Our growing organization was founded by the pioneer of data center REITs. CloudHQ has state-of-the-art data center sites located on two Northern Virginia campuses, as well as London, Frankfurt, Paris, Milan, and São Paulo, and we anticipate exponential growth over the next several years both in the US and abroad. What The Role Entails The CSA Project Manager will be the client on site lead managing the design and construction of all elements of the CSA for the Oxfordshire project. As part of the Development & Construction Team the role will focus on the development of the Oxfordshire LHR campus but will also involve work on other EMEA projects. Day-to-day reporting will be to the Senior Project Manager. What You Will Get to Do • Lead the management of the CSA construction through the entire project delivery period, • Be involved in the MEP planning and construction expanding knowledge in this area whilst assuming more management of MEP scope over time, • Develop detailed project plans, schedules, and budgets in collaboration with the CloudHQ project management team, • Coordinate with EU Dev central engineering, procurement, and construction teams to ensure alignment with project objectives and timelines, • Conduct regular project meetings to review progress, address issues, and update internal and external stakeholders on construction activities, • Review Consultant and Contractor pre-qualifications and advise on scope gaps, value engineering and CSA best practice, • Manage all vendors to achieve all statutory approvals and compliances, • Oversee all on-site construction activities, ensuring compliance with design specifications, building codes, and safety regulations, • Supervise construction, subcontractors, and vendors to maintain high standards of workmanship and quality, • Monitor project progress, identify potential risks or delays, and implement corrective actions to keep projects on track, • Use your CSA expertise to ensure all lessons learned are captured for subsequent delivery phases Requirements • Be a key link to CloudHQ’s tenants, solving their issues and gaining their trust to become a trusted go to partner, • Implement quality assurance processes to ensure that construction meets project specifications and industry standards, • Conduct regular inspections of workmanship, materials, and equipment to identify and resolve deficiencies, • Document and report any non-conformities or deviations from project requirements and implement corrective measures as necessary, • Drive CSA related project issues to a successful conclusion, seek advice from colleagues where necessary to solve project challenges, build teams to deliver results, champion CloudHQ’s core values, • Ensure Health and Safety is prioritised on site and as part of the design, in conjunction with the wider CloudHQ project team, • Always drive best practice Health and Safety on CloudHQ construction sites and workplaces. Develop a working knowledge of OHSA Health and Safety standards Our Ideal Candidate Will Also Possess • Strong proficiency in Microsoft Office products, and aptitude for learning additional software tools, • Ability and willingness to travel to other CHQ data center sites if needed

The Role We're seeking a technically skilled Rail Systems Deployment and Maintenance Specialist to join our growing team. This is a hands-on role for someone who enjoys working with advanced survey equipment and data capture systems, ensuring they're optimally configured and ready for deployment. You'll be the vital link between our survey teams and technical systems teams, taking responsibility for equipment preparation, installation support, commissioning, and troubleshooting. While you'll receive comprehensive training in our railway infrastructure monitoring systems, this role offers exposure to various survey technologies across our different business divisions. Key Responsibilities • Prepare, test and optimise survey and data capture equipment to ensure peak performance, • Conduct Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), documenting results and resolving issues, • Support equipment installation and commissioning at client sites, including mounting systems on various platforms, • Provide on-site technical support during deployments to ensure smooth operation and customer satisfaction, • Diagnose and troubleshoot equipment faults, coordinating repairs as needed, • Manage equipment mobilisation and demobilisation logistics, • Communicate effectively with clients during installation and commissioning activities, • Create and maintain technical documentation and reference materials, • Mentor junior technical staff, sharing knowledge and best practices What We're Looking For Essential: • Hands-on experience with electronic equipment, instrumentation, or technical systems, • Practical troubleshooting and fault-finding skills, • Strong attention to detail and methodical approach to testing and documentation, • Good communication skills and customer-facing experience, • Comfortable with travel and working at client sites, • Full UK driving licence Desirable: • Experience with survey equipment, sensors, or data acquisition systems, • Understanding of acceptance testing procedures, • Background in electronics, engineering, or related technical field, • Experience with equipment installation or field service, • Rail industry experience or awareness (training will be provided) What We Offer • Comprehensive training in our proprietary railway inspection technologies, • Opportunity to work with cutting-edge geophysical and survey equipment, • Varied role with mix of workshop, office, and field-based activities, • Career development opportunities with progression towards R&D involvement, • Supportive team environment within an established technical company, • Competitive salary based on experience

Job Title: Quality Manager (GCP) Rate: Competitive in line with skills / experience Type: Permanent My client a specialist life science organization currently has urgent need for a GCP Quality Manager to join on a permanent basis. This role is accountable for maintaining compliance with global regulatory requirements, ICH Good Clinical Practice standards, and internal quality procedures. Key Responsibilities • Provide expert GCP quality oversight and guidance to cross-functional clinical teams, • Maintain and enhance GCP-related elements of the organisation’s Quality Management System, • Support the assessment, qualification, and ongoing monitoring of clinical service providers and vendors, • Develop and execute risk-based GCP audit plans, including audits of sites, CROs, laboratories, and internal processes, • Coordinate organisation-wide inspection readiness activities, ensuring consistent preparedness across functions, • Support health authority inspections (FDA, EMA, MHRA), including inspection preparation, participation, and follow-up, • Manage GCP quality records such as deviations, CAPAs, and change controls, ensuring timely and compliant closure, • Monitor corrective and preventive actions to completion and confirm effectiveness, • Draft, review, and update SOPs, policies, and training materials to reflect evolving regulations and best practices Required Experience & Skills • Bachelor’s degree in a scientific discipline or equivalent relevant industry experience, • At least 5 years’ experience in GCP-focused Clinical Quality Assurance, • Practical experience managing quality events and working within electronic quality systems, • Strong working knowledge of ICH GCP and global regulatory frameworks (FDA, EMA, MHRA), • Qualified GCP auditor with demonstrated experience across investigator sites, vendors, and systems, • Thorough understanding of clinical trial conduct, documentation, and lifecycle expectations, • Experience supporting or participating in regulatory authority inspections, • Proven capability in authoring and maintaining controlled quality documentation, • Proficiency with Microsoft Office and clinical systems such as eQMS, eDMS, LMS, and eTMF Interested? Apply now for immediate consideration or contact Michael Owusu-Ansah on +44 203 928 6631 – We are an equal opportunities Recruitment Business and Agency. We welcome applications from all suitably qualified candidates regardless of their race, sex, disability, religion/belief, sexual orientation or age. Planet Pharma is an Employment Business providing Global Staffing services

Are you an experienced Rewards and Benefits professional? Do you have strong experience of working in a unionised environment and dealing with unions? Have you worked in a medium or large-sized organisation? If so, this could be the perfect opportunity for you. Our client, an aviation service provider, is recruiting for an interim professional with industrial relations and rewards and benefits expertise to support across several critical workstreams over the next 6 months. Rewards and Benefits Consultant 6-Month Contract Rate dependent on experience Monday to Thursday 08:30 – 17:00, Friday 08:30 – 16:30 Oxfordshire (hybrid 3 days/week from home) Rewards and Benefits Consultant Job Description • Supporting union negotiations by tracking discussions, gathering evidence, maintaining accurate records, and assisting HRBPs through a key Jan–Apr industrial relations period., • Delivering research and analysis for the annual pay award while supporting HR leaders with RemCom preparation, briefing materials, and executive committee inputs., • Contributing to long-term incentive planning by assisting with 2026 LTIP progression and coordinating required data, insights, and documentation., • Leading implementation of a new tech-enabled benefits platform, collaborating with data, supply chain, finance, wellbeing, and comms teams to harmonise offerings., • Providing additional support across HR projects, including helping the project manager complete the organisation-wide allowances review where capacity allows. Rewards and Benefits Consultant Essential Experience/Skills/Qualifications • Experience of dealing with unions and working in unionised environments, • Strong rewards and benefits experience, • Well-versed working for a medium or large-sized organisation Rewards and Benefits Consultant Company Benefits • Inside IR35 contract, • Hybrid working 3 days/week from home, • Flexible hours available Please apply below if this role is of interest!

Injection Moulding Setter Location: Kidlington, Oxfordshire Shift Pattern: Continental 4 on / 4 off, 12-hour shifts (rotating days and nights) Pay and Benefits Salary up to £43,416 per annum , inclusive of a 34% shift allowance Attendance bonus of £1,170 per year , paid bi-monthly Overtime paid at 1.75x standard rate , increasing to 2x on Bank Holidays Pension contribution matched up to 5 percent Life assurance at four times annual salary 20 days annual leave Employee discount scheme Eyecare vouchers Cycle to work scheme Share save scheme Ongoing training and development Free on-site parking An established manufacturing site in Kidlington is looking to appoint an experienced Injection Moulding Setter to strengthen its production team. This is a hands-on role suited to someone confident setting machines, optimising processes, and supporting safe, high-quality production in a shift-based environment. The Role You will be responsible for setting, running, and supporting injection moulding machines to ensure consistent output, high standards of quality, and maximum uptime. Key responsibilities include: Preparing for production changeovers by ensuring tools, materials, and equipment are ready in advance Carrying out safe machine shutdowns in line with approved safe systems of work Removing, transporting, and storing mould tools correctly and safely Installing and setting tools for new production runs, completing all checks thoroughly Clearing down materials from previous jobs and ensuring correct materials are available for the next run Setting machines to defined process standards and achieving acceptable first-off quality Monitoring and optimising processes to meet or exceed target cycle times and cavitation Maintaining clean, safe, and organised production areas Responding promptly to machine, quality, or safety issues to minimise downtime Recording accurate production and performance data Completing all required documentation clearly and on time Carrying out weekly injection moulding machine fitness-for-use checks Supporting continuous improvement activities including SMED, TPM, processing efficiency, material handling, and automation Leading by example on shift, promoting strong safety standards and teamwork About You Essential: Proven experience working as an Injection Moulding Setter Formal injection moulding setting qualifications Formal injection moulding processing qualifications Experience with cranes, lifting and slinging, and powered pallet trucks Strong understanding of health, safety, and quality standards Desirable: IMT qualification Confident communicator at shop floor and management level Calm, structured approach under pressure Flexible, approachable, and team-oriented Recruitment Process The interview process includes an on-site practical assessment followed by an interview with a Shift Manager . Proof of right to work in the UK will be required as part of the recruitment process, with documentation requested at interview stage. TPBN1_UKTJ

Go the Extra Mile with Smile! Join Smile Dental Care now - Your Path to a Rewarding Dental Career! This role would require you to relocate to SL1 Are you looking for a place to grow your career? Look no further! Smile Dental Care is an award-winning organization, and we believe that dentistry is not just a job, but a lifestyle and a career. What makes us unique: Smile Dental Care is one of the leading providers of Dental services with practices across the UK. We are an independently Dentist ownedNHS and Private company. We know that this is a not just a job but a vocation, a public service and a career. We strive to help our teams develop their skills and professional growth in the pursuit of excellence. We are still small enough to have a family feel and our clinical team are always onhand when needed but we have grown enough to offer the very best in support, marketing and ongoing training. Go the Extra Mile with Smile! Join Smile Dental Care now - Your Path to a Rewarding Dental Career! Are you looking for a place to grow your career? Look no further! Smile Dental Care is an award-winning organization, and we believe that dentistry is not just a job, but a lifestyle and a career. Why are we the best and unique? Work-Life Balance: At Smile Dental Care, we focus on your work-life balance, supporting you and ensuring a stress-free and fulfilling experience with our caring teams. We offer flexible opportunities, including days and hours, to suit your lifestyle. Professional Growth: We strive to help our teams develop their skills and achieve professional excellence. Latest Technology: We use the latest digital technology, including software of excellence, AI, top-quality materials, and equipment. Competitive Packages: Enjoy the most competitive payment packages in the industry. Relocation Support: We provide a comprehensive relocation package if needed, including assistance with finding accommodation and schooling for children. Training and Development: Access to free training packages and discounts on courses, including Invisalign, Implants, and facial aesthetics. In addition, you can benefit from discounts and bursaries on postgraduate degrees. We also offer specialist training through mentors, such as implants & sedation. We offer long-term partnerships to develop your career. Marketing and Business Support: We offer access to first-class marketing, branding, and business support - enabling you to maximize your diary utilization. We have established patient lists with excellent opportunities for private income. Clinical Freedom: Enjoy full clinical freedom in your practice. In addition, we pride ourselves on having virtually no complaints from our patients. Supportive Environment: We aim to instill a positive, happy, fun working culture and maintain a family feel. For a flavour of our Smile family teamwork, see our link below: For Overseas Dentists: For overseas dentists looking to start a fantastic career in the UK, we are highly experienced and have helped settle over 300 dentists into the UK from overseas. Our principal dentist: Dr Pip Dhariwal, established the International Dental Organization charity to support overseas dentists. We offer the following for our overseas colleagues: Relocation Packages to ease your transition into the UK 5-Year Visa Organized: Permanent residency is available after 5 years; we are Gold-level sponsors. Help with Settling: Assistance with housing, schools for children, and driving. Mentorship: Experienced mentors who will support you all the way. No Charges for Mentees: Unlike other practices, we do not charge you to be a mentee. TPBN1_UKTJ

Head of Fundraising We are seeking an experienced fundraising professional with a strong track record of securing major gifts to lead and deliver a high value global fundraising strategy that supports ambitious scientific and conservation programmes. Position: Head of Fundraising Salary: £70,000 plus, depending on experience Location: Hybrid, with weekly Oxford presence and some international travel Hours: Full time Contract: Initial 2 year fixed term, full time employment (with extension opportunities) Closing date: 19 January 2026, with early applications recommended About the Role This is a senior post responsible for designing and delivering a multi-year fundraising strategy focused on major donors, high net worth individuals and philanthropic foundations. You will play a central part in securing significant multi-year commitments that enable large scale expedition, research, and public engagement programmes. Key responsibilities include: Leading the development and execution of a major giving and philanthropic strategy Building and managing a robust income pipeline with clear revenue targets Identifying, cultivating and stewarding prospects capable of six and seven figure gifts Developing compelling proposals, cases for support and tailored donor materials Providing strategic support and briefing for senior leadership fundraising activity Maintaining strong donor stewardship through high quality communication and reporting Working collaboratively with scientific, operations and finance teams to align funding needs About You You will be a confident and credible fundraiser with a strong understanding of major gifts and donor relations. You'll bring: A proven track record of securing six and seven figure gifts Experience managing international donor relationships Excellent written and verbal communication skills, able to translate complex information into compelling narratives A strategic mindset with the drive and initiative to lead and deliver income growth Ability and willingness to travel internationally as required Experience in conservation, scientific research or biodiversity fundraising is welcomed, along with a wider understanding of global philanthropic networks. Other roles you may have experience of could include: Director of Development, Major Donor Lead, Philanthropy Manager, Head of Partnerships, Senior Development Manager, Foundation Relations Lead, Global Giving Manager. #INDNFP PLEASE NOTE: This role is being advertised by NFP People on behalf of the organization. TPBN1_UKTJ

Job Title: Workshop Manager Location: Begbroke, Oxfordshire Salary: Competitive Job Type: Full Time, Permanent, 40 Hours Per week About Us: Vans for Bands (VFB) is a leading supplier of sleeper coaches and splitter vans to customers from across the music, comedy, events, theatre and TV production and sports industries. It is of vital importance that our fleet is maintained to the very highest standards as set by the company and the DVSA. We are a forward thinking employer who invests in our team through ongoing training and attention to maintaining a healthy work/ life balance. We have found that experienced HGV mechanics are an excellent fit for our team. About the role: Are you a proactive leader who thrives on solving challenges and keeping operations running smoothly? As our workshop manager, you'll be the driving force behind our coach building team - ensuring every vehicle interior conversion meets the highest standards, is delivered on time and stays within budget. You'll lead a skilled team of fitters and manage workflow efficiently. Your ability to anticipate issues and find smart solutions will be key to maintaining productivity and quality. Plus you'll champion Health and safety, creating a safe and efficient environment for everyone. If you are ready to take ownership, think ahead and make an impact we'd love to hear from you. Key Responsibilities: Manage and supervise workshop staff, providing leadership and support across a variety of complex activities Maintain high standards of workmanship and quality control Oversee stock control, procurement of materials and quality control Diagnose issues and provide technical support where needed Coordinate workshop jobs to ensure maximum efficiency and timely delivery Ensure all health and safety regulations and procedures are complied with. Communicate effectively with clients, suppliers and internal teams Maintain accurate records, reports and paperwork Carry out performance reviews and support staff development Create a constructive working environment by leading with a positive attitude About you: Experience and qualities: Previous experience in a workshop supervisory or management role Outstanding and inspirational leadership, communication and organisational skills Ability to work under pressure, prioritise and manage multiple tasks Strong problem solving skills and attention to detail Proficient in IT and administrative tasks Strong technical understanding of fitting out and conversion in the automotive, yacht building, horsebox or similar industry (preferred but not essential) Relevant certifications/trade qualifications (preferred but not essential) Additional Information: If you would like further information about the role, please contact our HR Team. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Maintenance Workshop Coordinator, Equipment Service Manager, Maintenance Manager, Maintenance Operations Manager, Equipment Maintenance Coordinator, Repair Shop Manager, Material Handling, Material Handling Manager, Workshop Manager may also be considered for this role. TPBN1_UKTJ

Job Title: Fire Stopper Research Laboratory Project Location: Oxford Sector: Construction / Passive Fire Protection About the Contractor We are recruiting on behalf of a leading UK construction and engineering contractor specialising in complex and technically demanding projects. The business undertakes specialist works including civil engineering, concrete structures, remediation, demolition and enabling packages, often operating in highly controlled and regulated environments. The contractor is recognised for its strong focus on safety, quality and programme delivery, working closely with clients, consultants and specialist subcontractors on projects including research and laboratory facilities. The Role We are seeking a skilled Fire Stopper to join the team on a prestigious research laboratory project in Oxford . The role focuses on installing passive fire protection systems to prevent the spread of fire and smoke, including fire stopping works around services, penetrations and compartment walls . You will work under the direction of the Site Supervisor (Fire Protection), ensuring all fire stopping works are installed safely, on programme, and fully compliant with regulatory and project specifications. Key Responsibilities Installing fire stopping materials around penetrations, service routes, and compartment walls Ensuring all works comply with drawings, specifications and relevant fire safety standards Following RAMS and maintaining a high standard of health & safety on site Working closely with site management and other trades to coordinate works Conducting inspections and checks to ensure fire stopping compliance Maintaining accurate records of works and materials used Participating in toolbox talks and site safety briefings Required Experience & Skills Proven experience as a Fire Stopper or in passive fire protection installation Strong understanding of fire stopping systems, materials and installation methods Knowledge of relevant fire safety regulations and standards Ability to read and interpret drawings and specifications Strong attention to detail and commitment to quality Ability to work as part of a team in a fast-paced, live construction environment Qualifications CSCS Card (essential) FIRAS, BM TRADA or equivalent passive fire protection qualification (desirable) Health & Safety training (e.g., SSSTS/SMSTS or similar) is a plus Whats on Offer Opportunity to work on a high-profile research laboratory project in Oxford Competitive pay rates and benefits Long-term work with a reputable specialist contractor Professional, safety-focused working environment If you are a skilled Fire Stopper with experience in passive fire protection, seeking a challenging research laboratory project in Oxford, we encourage you to apply. TPBN1_UKTJ

Functional Lead Finance Oracle Fusion Location: Oxford, UK (Hybrid/On-site 3 days per week) Job Type: Full-time, Permanent Salary: Competitive, commensurate with experience Industry: Research & Development / Technology / Science A Global Impact Opportunity: Finance Functional Lead Oracle Fusion We are seeking an experienced Finance Functional Lead with deep expertise in Oracle Fusion ERP Cloud applications to spearhead an enterprise finance transformation initiative within a pioneering global institute. This is a key leadership role responsible for defining, implementing, and optimising finance processes across Oracle Fusion modules to support our organisations strategy, compliance, and operational excellence. You will partner closely with Finance leadership, business stakeholders, and technical teams to ensure successful deployment, adoption, and continuous improvement of cutting-edge finance solutions. The organisation is dedicated to solving humanitys most challenging problems across health, food security, climate change, and AI/robotics, operating within a brand new, world-class R&D facility currently under construction in the Oxford Science Park. If you are a highly adaptable, business-oriented Oracle expert passionate about continuous improvement and value creation, this is your chance to drive innovation in an environment where excellence is achieved through collaboration and tenacity. Key Responsibilities: Lead the design, configuration, and implementation of Oracle Fusion Finance modules (GL, AP, AR, FA, Cash Management, Expenses, Procurement, and Financial Reporting). Act as the primary functional Subject Matter Expert (SME) for Finance, translating business requirements into robust solutions within Oracle Fusion ERP Cloud. Define and maintain finance system governance, internal controls (SOX), data integrity, and security frameworks. Collaborate with integration and technical teams to ensure seamless interoperability across enterprise systems. Lead system upgrades, release management, regression testing, and change impact assessments. Develop training programs and change management materials to drive user proficiency across Finance teams. Essential Knowledge, Skills, and Experience: Bachelors or Masters degree in Accounting, Finance, Business Admin, IS, or related field. 810+ years of experience in finance systems and Oracle Fusion ERP Cloud, with strong functional expertise across all core Finance modules. Proven track record of leading full lifecycle Oracle Fusion Finance implementations or major ERP transformation programs. Strong understanding of finance and accounting processes, statutory compliance, and reporting frameworks (IFRS, GAAP, SOX). Hands-on experience with Oracle ERP configuration, workflows, role-based security, and financial reporting tools (OTBI, Smart View, FRS, BI Publisher). Familiarity with chart of accounts design, subledger accounting (SLA), and intercompany processes. Excellent communication and stakeholder engagement skills. Highly Desirable: Oracle ERP Cloud certifications (e.g., Oracle Financials Cloud Implementation Specialist). Experience with integration tools like Oracle Integration Cloud (OIC) or EPM Cloud. Agile/Scrum delivery experience. Terms of Appointment & Location You must be eligible to work in the UK. You must be based in, or within easy commuting distance of, Oxford . Willingness to travel as necessary. Some longer hours may be required during peak periods due to the global nature of the programme. TPBN1_UKTJ

Roofing Supervisor Reporting to: Repairs Delivery Manager Direct reports: 15 Job Purpose To lead the Roofing Team and Damp & Mould Trade Operatives in delivering safe, high-quality repairs and maintenance services. The role has a strong focus on damp and mould remediation and all working at height activities. It is responsible for day-to-day leadership, planning and resource management, and for ensuring full compliance with health and safety legislation, regulations and organisational policies across both teams. Role Specific Duties Provide visible and effective leadership to Roofing and Damp & Mould operatives, setting clear expectations, holding regular 1:1s and team meetings, and managing performance. Plan, schedule and coordinate work across both teams, allocating operatives, equipment and materials to achieve safety, quality, time and customer satisfaction targets. Act as the day-to-day health and safety lead for roofing and damp/mould activities, promoting a strong safety culture and maintaining zero tolerance for unsafe practices. Ensure full compliance with the Work at Height Regulations and all other relevant health, safety and building regulations, policies and procedures. Oversee, review and sign off risk assessments and method statements for roofing, damp and mould, and height-related works, ensuring they are clearly communicated and understood. Carry out regular site inspections and safety audits, addressing non-compliance promptly and implementing corrective actions. Oversee the safe erection, use and dismantling of scaffolding, towers and other access equipment, ensuring operatives hold valid PASMA, IPAF or equivalent training and use appropriate PPE. Manage damp and mould surveys and remediation works, ensuring appropriate methods and materials are used and that residents are kept informed throughout the process. Coordinate works where roofing and damp/mould activities overlap, minimising disruption and ensuring safe, efficient delivery. Use PDA/job management systems and Microsoft tools to update jobs, monitor progress and provide accurate information for reporting and performance monitoring. Act as an escalation point for complex resident issues or complaints relating to roofing or damp/mould works, resolving matters professionally and promptly. Liaise with internal teams and external contractors (such as scaffolding providers and specialist contractors) to ensure work is delivered safely, efficiently and in compliance with requirements. What You Will Need to Have Proven supervisory experience in repairs, maintenance, roofing, construction or a similar operational environment. Experience of leading teams, managing performance and handling difficult or sensitive conversations. Strong practical knowledge of working at height safety requirements and site management. A clear commitment to health and safety, including experience of risk assessments, method statements, site inspections and incident follow-up. Excellent planning and organisational skills, with the ability to manage multiple workstreams and competing priorities. Strong communication and interpersonal skills, with the ability to build effective relationships with residents, colleagues and contractors. Good IT skills, including Microsoft Office, Teams and PDA/job management systems. Full UK driving licence. Desirable PASMA and/or IPAF certification. Working at Height and Asbestos Awareness training. First Aid at Work qualification. IOSH Managing Safely, NEBOSH or a similar health and safety qualification. Formal supervisory or management training or qualification. Successful candidates will be subject to a basic DBS check. No role profile can cover every issue which may arise within the post. The postholder will be expected to carry out other duties from time to time that are broadly consistent with those described above. If you are interested in this position please apply or if you would like to have a confidential chat please call Josh Fenn at Fortus Recruitment Group. Fortus Recruitment Group Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Fortus Recruitment Group is an equal opportunities employer INDJF TPBN1_UKTJ

A global leader in the manufacture of industrial components for a wide range of industries is looking for an Injection Moulding Setter to join their busy, well-equipped facility near Oxford. Up to £44,500 (depending on experience) + Bonus (up to 10%) + OT + Additional training + Relocation assistance Working in a fast-paced moulding environment, you'll be responsible for the efficient production of small moulded parts while ensuring the highest quality standards are consistently met. As Injection Moulding Setter, your duties will include: Carrying out tool changes and condition setting, ensuring production runs smoothly. Trouble shooting process issues. Supporting and contributing to Lean manufacturing initiatives. To be successful in the role of Injection Moulding Setter, the ideal Candidate: Will have a proven experience working as a Setter or Technician in an injection moulding environment. Will have a solid background working with different plastic materials. Possess strong troubleshooting skills for processing issues. This is an excellent opportunity to join a stable, growing organisation that offers a professional working environment, comprehensive benefits, and genuine opportunities for development. Ready to take the next step in your career? Apply today! ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity. TPBN1_UKTJ

Job Title: Vinyl Wrapper / Vehicle Trimmer Location: Begbroke, Oxfordshire Salary: Competitive offers will be made on the basis of a candidate's experience Job Type: Full Time, Permanent We are looking for a full time Vinyl Wrapper / Vehicle Trimmer to join our coach building and vehicle conversions team. About Vans for Bands: Vans for Bands (VFB) is a leading supplier of splitter vans and sleeper buses to customers from across the music, comedy, events, theatre and TV production and sports industries. Our vehicles are in effect luxury motorhomes with interiors that are constructed and maintained to a very high standard. Job Overview: We are seeking an experience Vinyl Wrapper / Vehicle Trimmer to join our coach-building team. This role involves wrapping and trimming of flat and curved panels in the internal fit out and conversion of our luxury tour bus fleet. It will also include manufacture of some soft trim furnishings, including seat upholstery, and pattern development and fitment to a very high standard. In addition, the successful candidate will undertake basic carpentry tasks, such as panel preparation, framework adjustments, and minor joinery work, contributing to the overall build quality and finish of our bespoke interiors. Key Responsibilities: Vinyl wrapping of flat and curved panels and fitment to a high standard (Di-Noc products) Trimming of flat and curved panels with material and fitment to a high standard Carpentry tasks, such as panel preparation, framework adjustments and minor joinery work Inspect completed work for quality assurance, making adjustments as necessary Move, organise, and prepare materials for production Follow all safety procedures and maintain a clean, organised work area Skills and Experience: Previous wrapping experience required - additional training will be provided as necessary Previous trimming experience required - additional training will be provided as necessary The ability to sew and stitch Skills in trimming of leather and other covering materials are essential Basic joinery skills using a range of woodworking tools The ideal candidate should also have the following qualities and skills: A strong work ethic with good attention to detail Ability to work independently and as part of a team Reliable, punctual, and committed to quality work Good physical fitness for manual handling tasks We Offer: Stable, ongoing work with room to grow Training in coach-building & conversion processes and workshop skills Supportive and friendly team environment Competitive wages based on experience Opportunities for long-term career development Hours: 8 hours per day (including a short lunch break). There may be times when additional hours are required They will be required to clock in/out on a daily basis using the digital time clock installed in the office Our coach building workshop is operational between 7.30am and 4.30pm, Monday to Friday You may also very occasionally be required to work at weekends but this is rare (on such occasions you will receive time off in lieu during the normal working week) Benefits: Company pension On-site parking Please click APPLY to send your CV for this role. Candidates with experience of; Automotive Trimmer, Vehicle Upholsterer, Automotive Upholsterer, Interior Trimmer, Auto Interior Technician, Vehicle Interior Specialist, Trim Technician, Vehicle Wrap Installer, Vehicle Wrap Technician, Automotive Wrap Specialist, Car Wrap Installer, may also be considered for this role. TPBN1_UKTJ

Role: Injection Moulding Setter Location: Oxfordshire Salary: £45,000 Shift: Continental shift: 4-On, 4-Off, 12-hour rotating days and nights . Omega is working with a leading manufacturing company, seeking an experienced Injection Moulding Setter to join their production team based in Oxford. This is an excellent opportunity to join a global organisation known for delivering essential industrial components across a wide range of sectors. Responsibilities - Injection Moulding Setter Prepare for production changes by ensuring all required tools, materials, and equipment are available for efficient changeovers. Safely shut down machines at the end of production runs, following all safe systems of work (SSOWs). Safely remove and install moulds, ensuring all installations are completed accurately and to safety standards. Complete production documentation and daily performance reports accurately. Lead by example in promoting high standards of safety, quality, and productivity. Optimise processes to achieve and exceed target cycle times and quality expectations. Monitor machine settings and ensure they are appropriately configured to maintain safe, repeatable processes. Respond quickly to machine-related issues, resolving any quality, uptime, or safety concerns. Identify and implement process improvements to support efficiency, quality, and safety. Conduct weekly machine fitness for use checks and ensure all records are maintained. Support continuous improvement initiatives including SMED, TPM, material recycling, and automation. Maintain a clean, safe, and organised working environment. Requirements - Injection Moulding Setter Proven experience working as an Injection Moulding Setter is essential. Formal qualifications in Injection Moulding Setting and Processing. Experience using cranes, lifting, slinging equipment, and powered pallet trucks (PPT). Strong communication skills across all levels of the organisation. Ability to remain calm under pressure and deliver results against deadlines. Team player with a flexible and proactive approach. IMT qualification is desirable. Benefits - Injection Moulding Setter Competitive basic salary plus shift allowance. Discretionary bonus scheme. Up to 5% matched pension contribution. Life assurance - 4x annual salary. 20 days annual leave. Employee discount schemes. Eyecare vouchers. Cycle to work scheme. UK Sharesave scheme. Training and development opportunities. Free onsite parking. For further details, please contact Kieren Provis - 01453 829776 or email your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors, and Laboratory Technicians to name but a few. For details of other opportunities available within your chosen field, please visit our website: Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

An exciting opportunity to work with Everest, a brand name within the Home Improvements sector. Everest a brand built on values of innovation, communication, ownership, and collaboration, is now looking for field sales representatives who are eager to join a forward-thinking team, where your ambition and customer-focused attitude will be valued and rewarded. As a self-employed field sales representative, you'll have the chance to build relationships with homeowners, guiding them through their home improvement journeys. As a Sales Representative you will: Attend customer appointments in their homes to discuss design ideas. Use bespoke design software to present home improvement solutions tailored to customers' preferences. Develop your knowledge and become an expert on our wide product range, including windows, doors, double and triple glazing, conservatories and materials such as uPVC and aluminium. Are you interested in an unlimited earning potential? Commission based role with OTE's of £40,000 to £60,000 per year (and our top performers earning significantly more!) Performance-based incentives and rewards. Flexible working hours. Training and ongoing support provided from the beginning. Requirements: A full UK driving licence and access to transport is necessary for travel to customer appointments. Candidates should be self-motivated and customer oriented. A positive consultative approach to sales. If you're motivated by success, enjoy working with people, and want a career that truly rewards your effort, we'd love to hear from you. Apply today and start building your future with Everest. Due to the nature of the work a basic DBS will need to be completed if successful at interview. Our Company is committed to monitoring & aligning its Policies with up-to-date Government guidance on reducing the spread of respiratory infections in the workplace. Through the Companys value of Succeed Together we are committed to Equality, Diversity and Inclusion. We recruit the best person for the job regardless of any protected characteristics as defined by the Equality Act 2010 creating an inclusive working environment and culture for our employees. TPBN1_UKTJ

Company description: OXB is a quality and innovation-led viral vector CDMO that enables its clients to deliver life-changing therapies to patients around the world. One of the original pioneers in cell and gene therapy, OXB has more than 30 years of experience in viral vectors, the driving force behind the majority of gene therapies. Cell and gene therapy is the treatment of disease by the delivery of therapeutic genetic material (DNA or RNA), into a patients cells. One highly effective approach to delivering genetic information is to re-engineer existing viruses to be safe delivery vehicles (vectors) to insert the genetic material into patients cells. This can be achieved either by directly administering the vector to the patient (often referred to as in vivo gene therapy), or by first introducing the genetic material to cells or tissue outside of the body, before administering the cells or tissue into the patient (often referred to as ex vivo gene therapy or gene-modified cell therapy). OXB collaborates with some of the world's most innovative pharmaceutical and biotechnology companies, providing viral vector development and manufacturing expertise in lentivirus, adeno-associated virus (AAV) and adenoviral vectors. OXB's world-class capabilities span from early-stage development to commercialisation. These capabilities are supported by robust quality-assurance systems, analytical methods and depth of regulatory expertise. Job description: Join Us in Changing Lives At OXB , our people are at the heart of everything we do. Were on a mission to enable life-changing therapies to reach patients around the worldand were looking for passionate individuals who embody our core values every day: Responsible, Responsive, Resilient, and Respectful . Were currently recruiting for a Demand & Scheduling Planner to join our Warehouse, Distribution and Supply Chain team . In this role, you will s upport the effective planning, forecasting, scheduling and reporting of all UK GMP production to meet the requirements of the Global S&OP process in line with operational; commercial and financial goals, playing a key part in advancing our mission and making a real difference. Your responsibilities in this role would be: Analysing supplier order confirmations in line with demand and highlight any areas of concern/escalations to the Supply Chain Planning Team Completing financial forecasting/budget database/batch release tracker and client order trackers as required, ensuring data integrity and accuracy from S&OP process Generating data analysis/reports as required Actioning the inventory transactions required to maintain optimum levels of client safety stock Creating and maintaining SOPs to document the activities of the demand & scheduling function We are looking for: Proficiency in Excel Proven Supply Chain experience (preferred) Professional qualifications in supply chain/ materials management (preferred) Knowledge of forecasting/planning/scheduling & supply chain activities Previous use of planning/materials management systems (ERP) About Us: OXB is a quality and innovation-led viral vector CDMO with a mission to enable its clients to deliver life changing therapies to patients around the world. One of the original pioneers in cell and gene therapy, we have more than 30 years of experience in viral vectors; the driving force behind the majority of gene therapies. OXB collaborates with some of the worlds most innovative pharmaceutical and biotechnology companies, providing viral vector development and manufacturing expertise in lentivirus, adeno-associated virus (AAV) and adenoviral vectors. OXBs world-class capabilities span from early-stage development to commercialisation. These capabilities are supported by robust quality-assurance systems, analytical methods, and depth of regulatory expertise. Why Join Us? Competitive total reward packages Wellbeing programmesthat support your mental and physical health Career development opportunitiesto help you grow and thrive Supportive, inclusive, and collaborative culture State-of-the-art labs and manufacturing facilities A company that lives its values: Responsible, Responsive, Resilient, Respect We want you to feel inspired every day. At OXB, were future-focused and growing fast. We succeed togetherthrough passion, commitment, and teamwork. Ready to Make a Difference? Collaborate. Contribute. Change lives. TPBN1_UKTJ

The RoleReporting to the Production Planner, the Production Controller is responsible for all production administration tasks to ensure smooth operations in terms of production materials availability. Support function for Production, Material Resource Planner and Operations Department. Support imple

Digital Communications Specialist - Oxford Immunocore (NASDAQ: IMCR) is a pioneering, commercial-stage T cell receptor biotechnology company whose purpose is to develop and commercialize a new generation of transformative medicines which address unmet patient needs in oncology, infectious diseases and autoimmune disease. Our leaders in R&D are internationally recognised as some of the biotech industrys most successful drug developers. We are creating not just an environment where great minds can interact but an innovation powerhouse answering the big questions. Focused on delivering first-in-class biological therapies to patients, we have developed a highly innovative soluble TCR platform. Our ImmTAX molecules underpin a new generation of precision engineered drugs that harness the immune system to treat a broad spectrum of diseases with high unmet medical need, including oncology, infectious diseases and autoimmune diseases. At Immunocore, we recognize that our employees are our greatest asset. We value the unique contributions each person brings to our team. By embracing Science, Trust, Respect, Integrity, Diversity, and Entrepreneurship (STRIDE), we create an environment where collaboration thrives, ideas flourish, and transformative changes happen. STRIDE represents more than just letters; it embodies our shared identity and drives our mission. We are dedicated to developing breakthrough therapies that transform patients lives, advancing medicine, and supporting one another in these pursuits. Immunocore is proud to be an equal opportunity employer. As such, we are committed to fostering an inclusive workplace where everyone feels valued, respected, and empowered. We encourage applications from individuals of all backgrounds, regardless of race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, or any other characteristic protected by law.Main Purpose of Job: The Digital Communications Specialist is a key member of Immunocores Communications team, developing and implementing projects and campaigns that enhance the companys digital presence and visibility. The role holder will lead the development of content across websites, social media, internal channels and other digital platforms, including by designing graphical, audio and video assets.Daily interaction with colleagues and team members is a key aspect of the role. Continuous professional development is essential to maintain a solid level of subject matter knowledge. The incumbent will work on problems of moderate scope that are both varied and routine.Key Responsibilities: * Maintain, enhance and create content for the companys digital channels and output, including the corporate website, intranet and social media platforms.* Work closely with the rest of the Communications team and content experts to develop content for the companys external and internal digital channels.* Design paid social media campaigns, and make recommendations for improvements to content and channels.* Continually assess the companys digital and visual footprint, and lead development of new assets.* Function as the Communications teams primary designer, developing social media cards, presentations, corporate materials (e.g. annual report) and more. * Input into large-scale creative projects carried out with external partners and agencies. * Act as a brand ambassador for the company and colleagues.* Create logos and thematic material (banners etc.) for campaigns, programmes and other initiatives.* Generate, propose and implement ideas for rich media content, e.g. animations, illustrations or gamification. * Liaise with printers and other suppliers where relevant.Supervisory Responsibility (If applicable): * N/AEducation, Experience and Knowledge: Essential Qualifications: * Educated to degree-level in digital communications, marketing, graphic design or an associated subject. Preferred Qualifications and/or Experience: * Knowledge of HTML and web design. * Experience of SharePoint intranet management and other platforms in the Microsoft suite. * Video, audio and static image editing.* PowerPoint design.* Knowledge of digital healthcare landscape and social media platforms.* Project management experience and comfort with vendor management. * Familiar with working in a mid-sized (c. 500 employees) company, particularly in biotechnology or scientific research sectors. Experience* 2 to 5 years of digital communications or associated work. Other: * N/AIMMUNOCORE ValuesAt Immunocore, we recognize that our employees are our greatest asset. We value the unique contributions each person brings to our team. By embracing Science, Trust, Respect, Integrity, Diversity, and Entrepreneurship (STRIDE), we create an environment where collaboration thrives, ideas flourish, and transformative changes happen. STRIDE represents more than just letters; it embodies our shared identity and drives our mission. We are dedicated to developing breakthrough therapies that transform patients lives, advancing medicine, and supporting one another in these pursuits.

Senior Scientist I - Characterisation | CMC - Oxford Immunocore (NASDAQ: IMCR) is a pioneering, commercial-stage T cell receptor biotechnology company whose purpose is to develop and commercialize a new generation of transformative medicines which address unmet patient needs in oncology, infectious diseases and autoimmune disease. Our leaders in R&D are internationally recognised as some of the biotech industrys most successful drug developers. We are creating not just an environment where great minds can interact but an innovation powerhouse answering the big questions. Focused on delivering first-in-class biological therapies to patients, we have developed a highly innovative soluble TCR platform. Our ImmTAX molecules underpin a new generation of precision engineered drugs that harness the immune system to treat a broad spectrum of diseases with high unmet medical need, including oncology, infectious diseases and autoimmune diseases. At Immunocore, we recognize that our employees are our greatest asset. We value the unique contributions each person brings to our team. By embracing Science, Trust, Respect, Integrity, Diversity, and Entrepreneurship (STRIDE), we create an environment where collaboration thrives, ideas flourish, and transformative changes happen. STRIDE represents more than just letters; it embodies our shared identity and drives our mission. We are dedicated to developing breakthrough therapies that transform patients lives, advancing medicine, and supporting one another in these pursuits. Immunocore is proud to be an equal opportunity employer. As such, we are committed to fostering an inclusive workplace where everyone feels valued, respected, and empowered. We encourage applications from individuals of all backgrounds, regardless of race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, or any other characteristic protected by law.To characterise the companies biotherapeutic recombinant T-cell receptor based and related molecules using a wide variety of protein characterisation and mass spectrometry methods. To contribute to the development of characterisation methods for the companys biopharmaceutical products, including peptide mapping (LC-MS/MS) and intact mass spectrometry analysis. KEY RESPONSIBILITIES* Supporting drug substance and drug product impurity characterisation and identification* Performing protein sequence and post translational modification identification, including glycosylation analysis. * Supporting drug substance and drug product process development by performing characterisation of process intermediates * Contribute to the Development of characterisation methods of ImmTAX and other products, including peptide mapping (LC-MS/MS) and intact mass analysis * Designing and carrying out biochemical characterisation, chemical stability and comparability studies of biologics/drug products. * Contribute to writing study protocols and reports.* Independently testing and, increasingly, leading lines of investigation. Proposing new experiments based on emerging data and other related information. Providing support on technical aspects to others. * Priorities: establishing priorities for own work and team-based projects; making decisions on prioritisation based on the overall goals of the team, department and project, using direct evidence and personal experience as guidance. * Technical Knowledge: sharing knowledge with the wider team and, across departments representing the department. May also act as a mentor to other colleagues, sharing scientific knowledge. Providing analysis of new techniques and theories from outside the Company to advance the way the company works; sharing these with leaders across the department. * Laboratory records: ensuring that all records and information are up to date, on time and recorded to the correct standard. Supporting and encouraging others to achieve this.* Laboratory equipment: providing technical guidance to others within the team on how to use equipment most effectively.* Reporting: communicating and presenting research findings at meetings with colleagues, senior management and partners.* Adhere to safe working practices in laboratories according to Immunocore EHS policies.PERSON SPECIFICATIONExperience & knowledgeEssential* Experience in development of HPLC based peptide mapping methods and mass spectrometric characterisation of recombinant proteins or antibodies. * Experience of glycosylation analysis of recombinant proteins or antibodies.* Independently coordinated extensive testing of protein biomolecules.* Experienced in the characterisation of proteins expressed in both microbial and mammalian systems.* Understanding of expected post-translational modifications in biological systems.* Worked in a bench-based biopharmaceutical laboratory environment. * Established as an expert amongst peers in one or more of the following areas: o electrophoretic o chromatographic o mass spectrometry* Experienced in assay development * Familiar with biopharmaceutical stability study principles and interpretation thereof* Worked and contributed actively in a diverse team environment* Proposed and driven changes in working practices that have improved efficiency, supported teams through adoption and change* Presented detailed scientific findings and papers to internal and external audiencesDesirable * Experience of glycosylation analysis of recombinant proteins or antibodies* Experience with late stage/commercial biopharmaceutical assay development and characterisation * Familiar with the principles of Good Manufacturing Practise (GMP)* Presented at external conferences* Led a small project team, formally or informally, through a change in practice including project management * Understanding of analytical requirements to support materials for use in clinical trialsEducation & qualifications* Essential: BSc. Or MSc. in biochemistry, biotechnology or related discipline* Desirable: PhD in related discipline

A Government organisation is seeking an experienced SC clearedPower Platform Solutions Trainer to support the upskilling of teams and the improvement of development standards across the Microsoft Power Platform. Key Requirements • Advanced, hands-on expertise in Power BI, Power Automate, and Power Apps, • Proven experience creating technical learning content, including written materials and video-based t...