Design jobs in Torrance, California - Page 4Create job alerts

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Systems Engineering Division (SED)offers unparalleledexpertisein systems engineering to the U.S. government and various public and private agencies, universities, nonprofit organizations, consortia, and commercial companies involved in the advanced development and application of space systems. From systems CONOPs and architecture development to system design and analysis, mission assurance, cost and schedule assessment, and economic market analysis, SEDleveragesa vast array of engineering and business disciplines across a diverse and dynamic portfolio of space programs and national challenges spanning the total space system lifecycle. The Acquisition Risk and Reliability Engineering Department (ARRED) provides criticalexpertisein risk management, reliability engineering, and system safety. We are looking for aRisk and Reliability Engineer (Engineering Specialist/Sr. Engineering Specialist - Safey and Mission Assurance Engineering). As a member of the ARRED team,youwill work closely with national security space and civil space customerson multiple programs todevelop reliablespace-based systemsthatprovidecritical capabilitiesandwhileidentifyingand mitigating hazards throughout the system lifecycle per MIL-STD-882E principles.You'llalso support senior decision-makers byestablishingeffective risk management processes and performing insightful risk assessments. The selected candidate willbe requiredtowork full timeon-site at our facility inEl Segundo, CA or in Chantilly, VA. WhatYou'llBe Doing * You will helpDepartment of Defense,intelligence community, NASA,and other government customers plan and execute their risk/reliability activities. * You will provide risk and reliabilityand system safetyguidance and analysis for national security space and ground systems * You will work closely with program office customers to perform assessments thatprovideimportant insights to senior decisionmakers. You will also lead small teams toaccomplishyour assignments. * This position will enable senior leaders to make risk-informed decisions in a fast-paced environment. * You will be the risk, reliability, and/or system safetysubject matter expertfor several programs, serving as their point of contact for assessments and guidance. You will engage with other SMEs to deliver critical assessments for senior program managers. * You will help the department adapt to a rapidly changing space industry and customer needs by helping to shape our risk/reliability capabilities strategy, developing innovative risk/reliability approaches for new space architectures, and delivering assessments thatprovideessential insights on time. What You Need to be Successful MinimumRequirements forEngineering Specialist * Bachelor's degree in mechanical engineering, electrical engineering, reliability engineering, systems engineering, or similar from a recognized institution * 10years of experience inrisk, reliability, and/or system safety * Strong communicationskills to effectively convey insights and recommendations * Demonstrated ability to work both individually and as a team member. * Willingnessto travel occasionally to work location or customer site approximately 10% of the time. * This position requires ability to obtain andmaintaina security clearance, which is issued by the U.S. government. U.S. citizenship isrequiredto obtain a security clearance. In addition to the above, theminimumrequirements forSenior Engineering Specialistinclude: * 12years of experience in risk, reliability, or systems safety * Demonstrated ability toestablishand maintain effective working relationships with customers * Demonstrated ability to train and mentor junior members of the staff * Experience in building relationships with customers and colleagues based on what and how you deliver that naturally leads both to the expansion or new work for yourself and your team. How You Can Stand Out It would be impressive if you have one or more of these: * Master's or Ph.D. in mechanical engineering, electrical engineering, reliability engineering, systems engineering, or similar from a recognized institution * 12 or more years of increasingly responsible experience in risk, reliability, systems safety, systems engineering, and/or mission assurance. * Experience working with US Space Force, NASA, NRO, FAA, andothergovernment agenciesinvolved intheSpaceEnterprise. * Experience leading technical teams, tracking project progress,proposingand implementing project schedules, budgets, and resources and communicating project needs * Understandingstatistics andtheir application inevaluating failures and anomalies * Experience in applying system safety engineering and management principles and techniques to achieve acceptable mishap risk within the time, cost, and mission effectiveness constraints throughout the life cycle of the system. * Expertiseinreliability analysis, includingsoftware reliability, reliability testing, reliability modeling and prediction, failure analysis, root cause analysis, Failure Mode Effects Analysis (FMEA), Fault Tree Analysis (FTA), Probabilistic Risk assessment (PRA), andFailure Reporting Analysis and Corrective Action System (FRACAS). * Familiarity with DoD standards and guidance on risk, reliability, and systems safety such as MIL STD 882E, MIL HDBK 217F, MIL STD 1629, and NASA System Safety Handbook. * Demonstrated ability to effectively lead small technical teams to produce analytical products and communicate findings and recommendationsto senior leadershipon time and within budget We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $226,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. At the Mission Payloads Division (MPD), we are pioneers in remote sensing systems that guide our country's space enterprise. Our talented and dynamic people create and flourish in electronics, sensors, radar, artificial intelligence (AI), and advanced data network domains. We boldly advance technology through our research and development and then forward to demonstration and integration. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD! The Digital and Integrated Circuit Electronics Department (DICED) resides within MPD and supports the design, modeling, simulation, verification, analysis, and test for microelectronics and digital electronic boards, FPGA/ASIC, boxes, subsystems, and systems for civil, commercial, and national space systems. Our expertise, combined with sophisticated in-house laboratories, rapid Eprototyping, and extensive modeling and simulation capabilities, enables DICED to deliver innovative solutions to national space systems and civil customers. The selected candidate will be required to work full time on-site at our facility at El Segundo, CA What You'll Be Doing Program Support: Serve as the technical authority, consultant, primary investigator, or project leader on multiple programs, collaborating seamlessly with both internal and external customers. Technical Guidance: Provide invaluable oversight, guidance, and expert advice on customer projects, including assessing space flight worthiness of electronics and electronic systems and performing specialized analytical and experimental studies pertaining to the design and development of digital and mixed-signal circuits, electronics, and systems. Digital, Mixed Signal, and Microelectronics Expertise: Leverage your profound expertise in the field of digital electronic systems for space applications to drive innovation and mission assurance while mentoring less experienced technical staff and serving as a role model in the organization. Quality Assurance: Thoroughly evaluate and independently verify contractor designs, methodologies, and overall system performance to ensure the highest standards of quality and reliability. What You Need to be Successful - Senior Engineering Specialist Minimum Requirements: • Bachelor's degree in electrical engineering or a related field from an accredited university, with 12+ years of experience in engineering/scientific roles related to space digital and microelectronic hardware for satellites and space systems., • Demonstrated expertise in the full lifecycle of space digital and mixed-signal systems-concept, requirements, design, manufacturing, assembly, integration, test, and on-orbit operation-at all system levels., • Deep and hands-on knowledge of space qualification for electrical components, radiation effects, board/component-level radiation testing, and worst-case circuit analysis (WCCA), including use of analysis tools (HyperLynx, PSPICE)., • Strong troubleshooting skills and proficient in lab equipment and measurements for hardware anomalies and failures, with experience in root-cause analysis and resolution in digital and mixed-signal circuits and subsystems., • Excellent communication, teamwork, and documentation skills; ability to work on-site at least 3 days per week, travel up to 25%, and obtain/maintain a U.S. government security clearance (U.S. citizenship required). How You Can Stand Out It would be impressive if you have one or more of these: • Advanced degree in electrical engineering or a related field from an accredited university., • Proven ability to identify risks and lead risk reduction initiatives in digital and mixed-signal electronics systems., • Extensive experience in FPGA/ASIC design using hardware description languages such as VHDL, Verilog, or System Verilog., • Strong knowledge of mixed-signal analog design, including active filters, precision current drives, data converter support circuitry, and related simulation techniques., • Skilled in signal integrity simulation, analysis, and testing, with a solid background in transmission line theory, electromagnetics, PCB, and package layout techniques., • In-depth understanding of high-speed digital communications, space payload electronics and subsystems, C&DH systems, and digital signal processing; holds a current Secret or Top-Secret clearance with recent SSBI or reinvestigation. We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $129,000.00 - $249,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

A Mechanical/HVAC Contractor Headquartered in the Northwest Suburbs, we are seeking an ambitious Project Manager to join our team. This Jobot Job is hosted by: Collin Walsh Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: Headquartered in the Northwest Suburbs of Chicago, we have over 100 years experience in HVAC, Mechanical Services, Fire Protection, Industrial Piping, Equipment Installation and more. We are a single source contractor working to be your one stop shop delivering outstanding construction and service solutions. After our systems have been installed, we pride ourselves on offering a full-suite of support services to create lasting relationships with our clients. If you are looking for a 100% local contractor to grow your career as an Project Manager, apply below. Why join us? We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. We are an Equal Opportunity Employer. Our compensation packages include: Competitive base salary Company Truck Performance based bonus opportunities ESOP program 4 weeks starting PTO 10 paid holidays + a week off during the holiday season Full benefits that includes health, vision, dental, and life insurance 401K with company match Job Details As a Project Manager, you will oversee the planning, execution, and delivery of HVAC and mechanical system projects, including chillers, boilers, custom fabrication, and process piping. You’ll work closely with clients, engineers, subcontractors, and internal teams to ensure projects are completed safely, on time, and within budget. Key Responsibilities Manage all phases of mechanical construction projects from pre-construction through closeout. Coordinate with design teams and field staff to ensure alignment with project goals and technical specifications. Oversee scheduling, budgeting, procurement, and subcontractor management. Ensure compliance with safety standards, building codes, and quality expectations. Lead project meetings and maintain clear communication with stakeholders. Implement design-build and design-assist delivery methods to optimize cost and schedule performance. Support innovation through the use of technologies such as Building Information Modeling (BIM). Qualifications Bachelor’s degree in Mechanical Engineering, Construction Management, or related field. 5+ years of experience managing mechanical or HVAC construction projects. Strong understanding of mechanical systems including thermal storage, cogeneration, and variable air volume systems. Proficiency in project management software and BIM tools. Excellent leadership, communication, and problem-solving skills. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Design-Build Mechanical Contractor This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $50 per hour A bit about us: Design-Build Mechanical Contractor that provides services through the Intermountain Region Why join us? o Opportunities for career growth, training, and development o Work/Life Balance o 401(k) plan with company match o Excellent medical, dental, vision insurance o Company paid Life and AD&D insurance o Short and Long-Term Disability Insurance o Tuition Reimbursement Job Details We’re seeking a Building Automation Controls Specialist in the Salt Lake area. This role is ideal for someone with strong BAS/DDC experience, who can program, commission, and service advanced building automation systems that integrate HVAC, lighting, security, and energy management. Responsibilities • Program, configure, and commission BAS/controls systems (Siemens or comparable platforms preferred)., • Lead system integrations involving HVAC, lighting, access control, and dashboards., • Troubleshoot and resolve complex DDC controls issues., • Develop and implement graphics, dashboards, and reports for end users., • Mentor junior technicians and provide project team guidance., • Collaborate with project managers, engineers, and contractors to deliver quality projects., • Provide customer training and technical support. Qualifications • 5+ years BAS / DDC experience, with strong HVAC control sequence knowledge., • Familiarity with integration protocols (BACnet, Modbus, LonWorks)., • Proficient in system commissioning, programming, and troubleshooting., • Experience reading mechanical drawings, control schematics, and wiring diagrams., • Strong communication skills and customer-facing experience., • Leadership ability to train or mentor others. Preferred • Niagara N4 certification or other BAS credentials., • Experience with energy dashboards or advanced graphics., • Knowledge of codes and safety practices (OSHA/NFPA). Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

$105 - $140/hourpayLegalContract Review & NegotiationCase AnalysisRisk AssessmentCorporate LawRegulatory ComplianceLitigation SupportLegal ResearchDue DiligenceDispute ResolutionConfidentiality & EthicsAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Legal Specialist Job Type: Contractor Location: Remote Job Summary: Join our customer's team as an expert Legal Specialist, where your expertise will play a pivotal role in shaping robust legal solutions. You will collaborate closely with domain experts and product teams to review, negotiate, and analyze contracts, ensuring legal compliance and risk management in a dynamic, application-driven environment. Key Responsibilities: • Conduct thorough contract review, drafting, and negotiation to optimize business outcomes while managing risk., • Analyze cases and perform in-depth legal research to provide actionable insights and recommendations., • Support litigation and dispute resolution by preparing documentation and assisting internal and external counsel., • Assess regulatory compliance and assist with due diligence for corporate matters, mergers, and acquisitions., • Design system prompts and rubrics for legal applications, engaging in multi-turn conversations with agents to ensure task accuracy and coherence., • Uphold the highest standards of confidentiality and professional ethics in all legal processes and communications., • Collaborate across teams to build and enhance legal tools or applications, leveraging your industry expertise. Required Skills and Qualifications: • Proven expertise in legal principles, corporate law, and regulatory compliance., • Strong contract review and negotiation abilities across a variety of legal domains., • Demonstrated experience in case analysis, risk assessment, and due diligence., • Hands-on experience in litigation support and dispute resolution., • Exceptional written and verbal communication skills, with a keen attention to detail and clarity., • Deep commitment to confidentiality, ethics, and integrity in all legal matters., • Track record of building or contributing to legal applications, tools, or systems. Preferred Qualifications: • Experience designing legal-focused conversational agents, rubrics, or AI-driven workflows., • Background in developing digital legal solutions or productizing legal expertise., • Ability to manage complex multi-turn conversations and system prompt design.

Job Description Mechanical Designer Our Mechanical Engineering team is looking to add an experienced team member to our group of talented engineers. The Mechanical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Mechanical Designer operates independently on complex tasks, delegates work to others, and acts as a key resource for system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale mechanical design packages in Revit with minimal redlines or rework., • Develop and enforce mechanical Revit standards, families, and workflows across teams., • Create advanced mechanical system layouts and manage complex modeling tasks independently., • Oversee drawing production, ensuring code compliance and graphic clarity across all mechanical documents., • Generate and review technical documentation including Division 21, 22, 23 specifications and report narratives., • Perform and validate mechanical equipment sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports performance verification., • Develop and apply standard calculation methods and templates for internal use (such as psychrometric, refrigerant concentration limits, storm drainage)., • Coordinate the BIM Execution Plan with input from multiple disciplines and ensure adherence., • Manage mechanical portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated work., • Lead field surveys, mechanical construction administration responses, and mechanical RFI reviews as a primary contact., • Train and mentor mechanical team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to mechanical staff development through mentorship., • Act as the lead mechanical representative in client meetings, confidently presenting technical design intent., • Document meeting outcomes and action items related to mechanical systems clearly, sharing responsibility for technical coordination follow-up., • Have a working understanding of mission critical HVAC systems, including but not limited to Fan Coil Walls, MDR/MMR CRAHs, air and water cooled chiller systems, and liquid cooling systems., • Have a working knowledge of CFD analysis. Has the ability to understand impacts to equipment performance and use to inform design decisions., • Ability to estimate loads for equipment sizing and work with team members to oversee detailed load calculations., • Knowledge of IEEC, ASHRAE 90.1 & 90.4 requirements for equipment/system efficiency requirements., • Bachelor’s degree in mechanical engineering, or equivalent, required., • 5+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

We are seeking an Infrastructure Automation Developer to help build automation, tooling, and internal services that support a modern hybrid infrastructure environment (on-prem and cloud). This role is ideal for an early-career Infrastructure Engineer, Systems Administrator, or DevOps professional who enjoys using software to improve how systems operate. You will work closely with a hands-on technical lead to turn real operational workflows into repeatable automation, infrastructure tooling, and scalable internal services. T his is not a traditional operations role focused on day-to-day system maintenance. Instead, this role focuses on building automation and infrastructure software that improves system reliability, observability, and operational efficiency. Key Responsibilities • Develop infrastructure automation and tooling using modern software practices (primarily .NET), • Convert scripts and manual processes into repeatable infrastructure services and internal tools, • Build automation to improve system reliability, observability, and scalability, • Translate infrastructure architecture and system behavior into working code and APIs, • Support systems across hybrid environments (on-premise and cloud), • Develop middleware, adapters, and internal infrastructure services connecting existing systems, • Collaborate with operations and engineering teams supporting multiple products and services, • Participate in technical design reviews and iterative solution development, • Document infrastructure tooling and architecture decisions for future maintainability Required Qualifications • 2–4 years of professional experience in Infrastructure Engineering, Systems Administration, DevOps, or Software Development, • Understanding of IT infrastructure architecture, including cloud, on-premise, and hybrid environments, • Experience using a general-purpose programming language or framework (such as .NET), • Familiarity with APIs, HTTP services, and service-to-service communication, • Experience running, debugging, and inspecting applications in production environments, • Exposure to infrastructure automation, systems integration, or internal tooling development, • Experience using Git or other source control systems, • Familiarity with CI/CD concepts, • Ability to work with partial requirements and build practical solutions Preferred Qualifications • Experience with containers (Docker or similar), • Familiarity with Linux environments, • Experience with CI/CD pipelines, • Exposure to AWS, Azure, or other cloud platforms, • Experience building automation tools, internal platforms, or infrastructure services Education Bachelor’s degree in Computer Science, Software Engineering, or a related technical field, or equivalent practical experience. Pay Range: $50 / hour

Job Description Description: Stop managing a capped book of business and start building your own. Best Version Media offers a high-performance, turn-key opportunity for sales professionals who thrive on the hunt. Own a local territory, drive new business, and build a multichannel marketing portfolio with no startup costs and no cap on your income. Your Role: • Prospect: Build a high-velocity sales pipeline through direct outreach to local decision-makers. You're the primary growth engine in your market., • Sell: As an independent contractor, you'll execute face-to-face marketing pitches. You'll offer a top-of-the-line product suite, including premium print, hyper-targeted digital ads, and online reputation tools that solve challenges for local business owners., • Launch: Follow our proven blueprint to hit your sales baseline and launch your publication. Most launch within 3-4 months, but top producers like you can go to print in as few as 13-25 days., • Scale: Our established infrastructure helps you build a durable, high-volume portfolio. Once your magazine is live, you focus on compounding your income by retaining existing accounts while hunting for new ones. Year 1: $65K – $100K (Target) Year 2+: $150K – $250K+ (High Performer) Top Producers: $1.5M – $3.9M+ total career earnings Relevant Experience: We value your track record of winning more than a specific degree. We train the product, but you bring the sales discipline. This role is for you if you are: • Entrepreneurial: You want the autonomy of business ownership with the backing of a major corporation., • Competitive: You have a "top of the leaderboard" mentality and a strong work ethic., • Self-starter: You don't need a manager to tell you to pick up the phone., • Resilient and driven: You view "No" as a stepping stone to the next "Yes." Join a marketing powerhouse with over 1,300 publications and 25,000+ clients across North America. Our back-end teams handle all the design, printing, and digital expertise, so you can focus on building relationships and making sales. Proudly recognized as a Glassdoor Best Place to Work, we're committed to a supportive, inclusive, and empowering culture. Our Top Sales Executives Have: Ability to meet with business owners face-to-face, and a professional home office setup: laptop, high-speed internet, and a mobile phone.

Job Description Are you a dedicated and motivated personal trainer looking to make a significant impact on individuals' lives? We are actively seeking exceptional trainers to join our team and deliver personalized fitness experiences in the comfort of our clients' homes. Join us and be a part of a dynamic community that values your expertise, provides flexibility, and supports your professional growth. Join Our Team of Elite In-Home Personal Trainers - Empower Lives through Fitness! BENEFITS/PERKS • Work-life balance: Design your own schedule and choose the clients you prefer to work with., • Freedom to succeed: No non-compete agreements, giving you the flexibility to work where and when you want., • Competitive rates: Earn $25 to $45 per hour, rewarding your skills and dedication., • Bonuses and rewards: Enjoy retention bonuses, client referral bonuses, and trainer referral bonuses., • Liability insurance: Your safety and peace of mind are our priority, with comprehensive coverage through the Svetness General Liability policy., • Customer support team: Focus 100% on your clients' goals while our dedicated concierge handles client requests and scheduling changes., • Education and growth: Access free ongoing education resources, including live education webinars, and receive ongoing manager support to elevate your expertise., • Fitness equipment discounts: Enjoy a 30% discount on fitness equipment to enhance your training programs., • Partner programs: Access to discounts to your favorite lifestyle brands (Meal Prep, Supplements, etc), • Warm client base: We bring clients directly to you, eliminating the need for selling or marketing efforts. The Certified Personal Trainer will be responsible for providing one-on-one and couples personalized fitness instruction in person to clients at their home, apartment gym or outside while encouraging them to reach their fitness goals. Responsibilities are as follows: • Customize client workout programs developed from the Initial Assessment, • Utilize the Svetness Fitness App for all client sessions, including programming & session notes, • Demonstrate each exercise and ensure client is performing correctly with or without modifications, • Conduct client Reassessments every 4-6 weeks, • Maintain client session appointments through Svetness scheduling software, • Able to provide a flexible schedule to accommodate client appointments, • Certified Personal Trainer: Accredited by NCCA, DEAC, or NBFE., • CPR/AED Certification: Ensure clients' safety with up-to-date CPR/AED training., • Education and experience: High school diploma or GED equivalent and 1-3 years of personal training experience., • Strong communication skills: Effectively communicate verbally, in writing, and technically., • Knowledgeable in nutrition: Possess a basic understanding of nutrition and healthy living practices., • Fitness expertise: Familiarity with a variety of exercise equipment and personal training methods., • Physical ability: Capable of lifting, pushing, pulling up to 50 lbs. and performing athletic calisthenics duties., • Requirements for this position include the possession of personal basic training equipment to effectively assist clients in achieving their goals. It is important to note that clients may not always have access to the necessary equipment.

Job Description Liberty Behavioral and Community Services located in the Culver City, CA, is seeking out driven, talented, and experienced employees searching for a great opportunity to work with developmentally disabled clientele (ages 5-65) on much needed adaptive skills training, which includes but is not limited to independent living skills (personal hygiene goals, laundry/cooking skills, etc.), social skills (navigating and communicating in one’s own environment or in the community, back and forth conversation, social pragmatics, etc.), safety skills (community safety, internet safety, creation of appropriate emergency practices, etc.), financial management (paying bills, creating budgets, etc.), etc. As an employee in Liberty's adaptive skills program, your duties will be to teach adaptive skills to children or adults between the ages of 5 and 65. You will be assigned a workload that may consist of 1:1 client ratio each requiring various hours of servicing per month (20-40+ hours). Employees will be required to set daily/weekly meeting times with the family and ensure adaptive skills training be delivered based on program goals and objectives. You are required to fill out daily activity logs, data sheets, sign in sheets, and compile monthly goal percentages to establish program effectiveness. In addition, this job will require you to travel to a client’s home, work on independent or family goals, and assist with socialization skills, self-care, daily living skills, financial independence, vocational exploration, and social/leisure activities. Work hours are flexible as times will be established with each family or client independently, which allows for individuals working for an advanced degree in psychology or related fields. Current positions allow for part-time or full-time work loads as cases become available. Liberty Behavioral and Community Services will follow all state requirements for COVID-19. Responsibilities and Duties • Provide direct session, • Provide feedback to parents, • Collaborate with team members, parents, and AST providers, • Write notes and reports, • Review notes and reports, • Attend staff meetings, clinical meetings and mentor meetings, • Record data, • Ensure the proper taking of data and notes Required • Master’s Degree (in Psychology, Education, Social Work, Counseling, Nursing, Applied Behavior Analysis, Behavioral Medicine, Speech and language, Rehabilitation, or a related field), • Must have valid driver’s license and car insurance., • Must have TB test, criminal background clearance., • Have at least 1 year of experience in the design and implementation of adaptive skills training plans, • Capable of lifting 50+ pounds, • CPR and HIPPA Training, Safety First Training, and Mandated Reporting (procedures, laws, regulations) Training., • Clean driving record for 2 years, • Familiarity with HIPPA, • Must be able to be hired on with the agency and not contracted (no direct care providers will be contracted), • 3-4 years of experience in a supervisory position Full Time Employees are eligible for: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Flexible schedule Salary: $34- $36 per hour

Job Description Thrive with Volt! Volt is immediately hiring an Industrial Engineer - Warehouse & Logistics in Carson, CA. As an Industrial Engineer - Warehouse & Logistics, you will: • Project manage Cabin industrialization deliverables on new programs as part of the integrated program team, • Develop and execute Industrialization plans in accordance with Cabin standards and program goals, • Represent the industrialization team in customer and program meetings as required, • Create the production element of the industrial dossier, mainly Manufacturing Bill of Materials, Routers, Standardized work instructions (including operation’s allocated time), • Work with the Design and Manufacturing teams to develop optimal production processes for each product type, • Coordinate with Facilities to ensure that the necessary production floor space and support is allocated in conjunction with the required schedule, • Provide feedback to Design group for DFMA (design for manufacture and assembly), • Integrate plan for the design, manufacture and implementation of new tools or prototypes from the tooling engineering teams on the new program, • Develop a detailed phasing schedule for implementation of new lines, • Develop Cycle time and Takt Time standards and plans to achieve them, • Maintain industrialization metrics in line with Cabin standard KPI’s and communicate performance on a regular basis, • Analyze and manage industrial process and product risks during development, • Champion and implement Lean principles, • Lead and participate in Kaizen and 3P events to develop improvements and plans Schedule: Monday-Friday 7:00am-4:00pm. The ideal candidate will have: • A strong warehouse and logistics background, • Collaboration – Establishes collaborative relationships to achieve objectives, • Communication – Excellent interpersonal and communication (written and verbal) skills, • Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment, • Excellent attention to detail., • Project and general management experience, • Experience in manufacturing line set-up, • Self-motivated and multi-tasker; able to level load own workload. *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from VOLT and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at volt-information-sciences-privacy-policy.pdf Pandologic. Keywords: Industrial Engineer (Logistics), Location: Carson, CA - 90746 , PL: 603386151

Job Description DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We are looking for an experienced mechanical engineer with extensive knowledge of product design and qualification. Pay range is $90,000-$140,000 (based on skills/knowledge/experience). Location: Carson, CA (onsite) Roles and responsibilities are as following: • Design residential and commercial luminaires from concept to manufacturing, • Champion the NPD process and communicate with all the project stakeholders, • Lead all the daily project activities and ensure on-time completion of tasks, • Qualify the products through the certification process, • Create quality metrics for design and manufacturing, • Mentor junior engineers and verify and improve the quality of designs Requirements: • Bachelor’s degree in Mechanical Engineering, • Minimum 5 years of experience in design and product development, • Minimum 2 years of experience in consumer electronics industry, • Professional with Solidworks or Creo, • Hands-on experience with electrical and mechanical products, assembly, and qualification testing, • Experience with DFM and professional with GD&T, • Familiar with thermal analysis and testing in electronic systems, • Familiar with material properties from plastics to Aluminum and other metals., • Knowledge of injection molding, die-casting, extrusion, and sheet metal processes, • Familiar with the certification process for codes such as NEC or building codes, • Excellent communication skills Company DescriptionDMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service. Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you. DMF Lighting is proud to be an Equal Opportunity Employer.DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.\r\nOur in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.\r\n\r\n\r\nDMF Lighting is proud to be an Equal Opportunity Employer.

Job DescriptionSalary: $90,000 - $125,000 Job Summary The System Engineer is responsible for conducting architectural assessments, breakdown of the system into components, the component interactions and interfaces, and the technologies and resources to be used in the design. Leads the system design, development, testing, and implementation of all aspects of the RF Satellite Communications System development lifecycle, under the leadership of the given Program Manager. Outlines integrated solutions that meet performance, usability, reliability, and security needs. Develop technical documentation on applications and systems. Facilitates and leads in the evaluation and selection of commercial-off-the-shelf product evaluations. Additional responsibilities include analyzing engineered products to meet customer use-cases and assure compatibility of all physical, functional, and program interfaces to meet system requirements. Essential Job Duties and Responsibilities • Works as part of an Integrated Product Team (IPT) as Systems Engineer under the direction of the Director of Systems Engineering and with the given Program Manager., • Support the development of subsystem and system requirements by leading requirements IPT and working group meetings with the customer and subcontractors., • Identify and perform hands-on evaluation of system components, such as antennas, LNBs, amplifiers, HPAs, up-converters, down-converters, multiplexers, reference oscillators, PLLs, etc., • Review, develop, and document system-level operational concepts., • Provides effective and efficient system engineering support during the conceptual design, detailed design, integration, and test phases of a product development program and production delivery, supporting on-time completion of assigned tasks., • Performs requirement flow-down and traceability and evaluates the verification test results to satisfy requirements., • Drives continuous improvement initiatives in the areas of analysis, monitoring and performance management., • Sets systems and test requirements of new products and makes decisions relative to system architecture, components selection, and customer use-cases., • Works to support multiple programs/products simultaneously., • Prepares and presents design and analysis summary material during internal and external design reviews., • Documents system designs using ThinKom records retention procedures., • Follows Company design procedures and corporate policies., • Other duties as assigned. Skills and/or Experience Needed • BS, MS, or PhD in Physics, Engineering, or related technical field., • Technically proficient System Engineer with strong architecture skills, subject matter expertise in RF Communications Systems, and solid knowledge of all major components of RF Systems., • Minimum of 2 years of experience in systems engineering, with a track record of successfully architecting, developing, and validating complex RF Communications Systems., • Hands-on expertise with Vector Network Analyzers, oscilloscopes, spectrum analyzers, and other RF measurement equipment., • Technically proficient in MS Office products. Language Skills • Interpersonal skills to effectively work with ThinKom people internally as well as working effectively with suppliers and customers., • Ability to effectively present information in team meetings and design reviews, as needed. Other Abilities • Ability to communicate clearly in a well thought out manner, verbal and written., • Must have substantial problem-solving abilities. Additional Requirements • Must be eligible to obtain and hold a US DoD Security Clearance in support of US Government contracts/subcontracts. Physical Demands • Ability to travel up to 10% of the time., • This position uses a computer terminal to access, input, and retrieve data., • This position may be subject to interruptions that may cause a change in immediate priorities and/or work focus., • While performing duties to this position, employee is occasionally required to stand, walk, sit, stoop, reach, and/or bend., • May occasionally lift and/or move files or boxes up to 50 pounds., • May be subjected to occasional irregular or extended work hours., • May be required to sit for extended lengths of time., • Must be able to work in an environment that may be subjected to occasional loud noises, hazardous materials and chemicals. ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom Solutions is an Equal Employment Opportunity Employer. ThinKom Solutions is a Drug and Alcohol-free working environment with a zero-tolerance policy

Job Description About Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: This is an exciting role at an innovative, high-growth defense technology company. The Senior RF Engineer will lead the design of solid-state power amplifier modules from concept to production. The ideal candidate for the position is someone who has experience with high power amplifier design and will have full ownership of product development through all stages of conception, prototype, and productization. In this role, you will work closely with a talented engineering team in a fast-paced environment to apply emerging technologies in innovative ways to rapidly produce new products. This position will report to the Manager of RF Engineering. Responsibilities: • Design of high-power microwave amplifiers and RF front-end modules for CW or pulsed operation, • Modeling, simulation, analysis, design, test, and optimization of high power active and passive power amplifier circuits, • Generate schematics and work closely with mechanical, thermal, and PCB layout teams to ensure circuit designs meet requirements while striving for first pass design success, • Board bring up, test, and bench level tuning, • Develop design verification test plans and assist with testing, • Evaluate, characterize, and select off-the-shelf power amplifier components like discrete transistors, MMICs, couplers, splitters/combiners, etc., • Assist with RF system and/or subsystem requirement development and feasibility studies, • Assist with manufacturing process and test requirement development, • Coordinate with internal quality and supply chain teams for process improvements, • Work with vendors to explore new device capabilities and modeling, • Troubleshoot board level RF issues/failures and provide recommended paths forward, • Hold design reviews and presentations with peers and act as a reviewer Basic Qualifications:, • BS or MS degree in Electrical Engineering with a focus in RF Engineering, • 5+ years experience with broadband high power amplifier design and development in frequency ranges from UHF to C band or higher with power levels 100W or greater, • Thorough understanding of high-power amplifier design process from component characterization and selection to volume manufacturing, • Experience with RF cascade analyses, component selection, and component evaluations, • Skilled with modeling, simulation, analysis, design, test and optimization of RF power amplifiers and supporting circuits like couplers, detectors, and bias sequencing / control, • Familiar with power amplifier impedance matching circuits and optimizations, • Experience with schematic capture and guiding PCB layout, • Experience with test plan development and test execution, • Experience developing circuit models and simulations using tools like Keysight ADS or Cadence AWR, • Experience with test equipment like vector network analyzers (VNAs), spectrum analyzers, signal generators, power meters, oscilloscopes, multimeters, power supplies, and load pull, • US Citizen or permanent resident (future security clearance may be required) Preferred Skills and Experience:, • Experience with 3D electromagnetic modeling and simulation using tools like Ansys HFSS, CST, and Feko or similar, • Familiar with RF filter design, • Experience with PCB design / layout, • Experience with RF requirement development and feasibility analyses, • Good written and oral communication skills, • Collaborative; capable of working across all levels of the organization, • Organized; comfortable working in a fast-paced, ever-changing environment ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. At Epirus, you'll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, "impossible" is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. Join us and rewrite the rules As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $143,900—$170,000 USD

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Component Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be a key member of our product development team, leading the parts and component selection, qualification, failure root-cause analysis, standardization, vendor evaluations, and performance verification efforts. The ideal candidate is experienced in EEE components engineering for commercial space applications. Qualified candidates will have ample growth opportunities, with the potential to build our company and processes through technical leadership roles or broader functional management roles. JOB DUTIES AND RESPONSIBILITIES • Act as CesiumAstro’s technical representative with customers to define testing and qualification requirements for all EEE parts., • Work all aspects of high-reliability EEE parts selection, standardization, qualification, and performance verification on a growing team., • Develop a roadmap for state-of-the-art components, working with the engineering design team for an effective product upgrade strategy while balancing cost and schedule, • Provide EEE part expertise and support on aerospace programs, reviewing customer documents and aligning their needs with the company’s product lines., • Evaluate components for compliance to industry requirements such EEE-INST-002, AEC, TOR, JEDEC, and others., • Author parts plans and process definition documents for internal and external use., • Write and review Engineering Change Orders (ECOs) to component-level procurement and test control documents., • Develop process improvements for streamlined component-level ECOs review and adjudication., • Experience building relationships with space part suppliers., • Review screening and test data received from manufacturers and test laboratories for compliance to specifications, purchase order requirements, and program contracts., • Interface internally with design engineers, reliability engineers, and quality engineers in support of risk mitigation and product development review efforts., • Prepare Non-Standard Parts Approval Requests (NSPARs) and Source Control Drawings (SCDs)., • Perform bill-of-materials cost analysis, components research and obsolescence mitigation, and supplier audits.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree or higher in Electrical Engineering or a related discipline., • Minimum 8 years of relevant prior experience as a component engineer., • Knowledge of component selection, qualification, screening and derating for military and aerospace., • Familiar with management of new part requests, part objects, and part attributes in a Product Lifecycle Management System, • Direct experience with parts plans for high-volume satellite constellations, evaluating parts screening and qualification in the context of high-volume constellation performance., • Excellent communication and interpersonal skills., • Strong desire to change an industry and disrupt incumbent players., • Sense of urgency, with the ability to work independently under agile development timelines., • Willingness to learn and work in both a support capacity and as a lead on differing functions.PREFERRED EXPERIENCE, • Demonstrated technical leadership in component engineering by mentoring junior component engineers and educating designers within your area of expertise., • Participate in failure analysis investigations ofdefective components and author failure analysis reports as required., • Knowledge and working familiarity with key reliability analyses for space mission hardware (prediction, derating, FMECA, WCA)., • Experience with radiation effects on electronics (TID, SEE) and common mitigation techniques., • Knowledge and working familiarity with key materials and process requirements for tin whisker mitigation, • Experience with components in ground or air applications, • Knowledge of EEE component manufacturing processes.

Job DescriptionDescriptionAs a Test Technician, you will perform a wide range of spacecraft component and assembly testing while developing and maintaining state-of-the-art test equipment. You will work closely with engineering to improve overall test processes across the company. Responsibilities • Work closely with test engineers to design and implement complex test setups for development and/or production environments (e.g. integrated systems testing in a thermal vacuum chamber with additional instrumentation for model validation), • Work with test engineers, manufacturing engineers, production technicians to improve production test processes and improve acceptance test flow and automation, • Perform maintenance and calibration activities for environmental and robotic test equipment, • Respond to production related non-conformances and drive to root cause and disposition, • Maintain process planning documents and action feedback when necessary, • Provide training and guidance to other technicians, • Provide training and guidance to engineers regarding practical test setups and instrumentation, • Support the avionics test team's participation when interfacing with related departments (e.g. integrated vehicle testing or propulsion testing) Minimum Qualifications • High school diploma or equivalency certificate, • 4+ years of experience working on electronic or propulsion assemblies and/or test production environment or a bachelor's degree in an engineering field, • Deep knowledge of the safe operation of electrical, power, and data acquisition systems, • Proficient with wiring and electrical systems, • Proficient with fabricating and acquiring parts to build test capabilities from basic requirements with minimal direction from others, • Ability to troubleshoot problems with electrical systems and implement scrappy solutions Preferred Skills and Experience • Associate degree or bachelor’s degree in mechanical, aerospace, or electrical engineering, • 7+ years of demonstrated professional experience providing support for the production and test of highly complex components (e.g. cars, battery systems, valves, actuators), • Experience designing tooling in a hardware development environment, • Capable of solving complex problems with little to no supervision on schedule as an individual or as a member of an integrated team, • Ability to use CAD tools to design 3D printable and/or sheet metal fixtures, • Familiarity with RF test equipment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionIn a world of noise, we find the signal — the pulse of potential. We weave the strands of talent, vision, and purpose into organizations that endure. Blending intelligence with intuition, we honor the human art of connection at the heart of every great company.About the Job Signal & Strand is partnering with a leading global consumer technology company to appoint a Senior Director, Brand & Creative. This role is responsible for defining and elevating the global brand, ensuring a clear, consistent, and differentiated presence across all consumer touchpoints. This leader will own brand strategy, creative direction, and communications, shaping how the brand is expressed across campaigns, content, and storytelling. Operating at the intersection of strategy and creativity, this role will build long-term brand equity while enabling effective, high-impact marketing execution. The Mandate • Define and lead global brand strategy, positioning, and narrative, • Ensure a consistent and differentiated brand voice across all channels and regions, • Elevate creative quality and storytelling across the organization, • Balance long-term brand equity with near-term marketing effectiveness, • Build and lead a high-performing brand, creative, and communications organizationKey Responsibilities, • Define and evolve global brand strategy aligned to business priorities and audience insights, • Own brand positioning, messaging frameworks, and narrative development, • Establish and enforce global brand standards across visual identity and communications, • Lead in-house creative across design, copy, and content production, • Oversee global communications and PR strategy, • Guide creative development for campaigns, product launches, and partnerships, • Partner with Growth, Product Marketing, and Regional teams to ensure alignment across initiatives, • Manage external agencies, including selection, briefing, and performance management, • Establish and track brand health and creative effectiveness metrics, • Act as a senior advisor to executive leadership on brand and communications strategy, • Anticipate and manage reputational risk and crisis communications, • Build and develop high-performing teams with clear processes and standardsIdeal Profile, • 10–12+ years of experience in brand, creative, or communications leadership roles, • Proven experience leading global brand and creative organizations, • Strong storytelling capability with excellent creative and editorial judgment, • Experience partnering with executive stakeholders and influencing at the highest levels, • Track record of building and scaling high-performing teams, • Experience working within complex, matrixed organizations, • Bachelor's degree in Communications, Marketing, Journalism, or related fieldLocation & Work Model, • El Segundo, CA, • Hybrid work model with regular in-office collaboration and global cross-functional partnershipCompensation We comply fully with the provisions of the U.S. Equal Employment Opportunity Commission (EEOC) and the California Fair Employment and Housing Act (FEHA). All employment decisions are made based on qualifications, merit, and business needs. We are committed to providing a workplace that is inclusive, respectful, and free from discrimination, harassment, and retaliation.

Job DescriptionCNC Programmer / Manufacturing Lead Reports to Operations Manager Salary: DOE, $40-60/hr We are seeking an experienced, detail-oriented CNC Programmer to join our Manufacturing team of our aerospace and defense manufacturing facility. This hybrid role emphasizes the CNC programming background, but is an opportunity for an individual to build their career as a high-value Manufacturing Supervisor. This role is critical to the front-end acceptance of client requests and planning/implementation of machined part production, from quoting and router development to CNC programming and first article execution. Ideal candidates will bring experience in both precision CNC Programming and Design For Manufacturability principles, in launching new parts into production efficiently and compliantly. Proficiency in programming 4-5 Axis CNC machines is critical. Opportunity A&R is a contract manufacturer experiencing strong demand growth which we expect to continue for several years. This position offers an awesome opportunity for career development and progressive earning power. Key Responsibilities: CNC Programming & Setup • Working largely with new customer requests, program CNC mill and lathe operations using Mastercam (or Fusion 360), based on customer blueprints and 3D models., • Perform first article setups, dry runs, and edits to validate program accuracy and efficiency., • Conduct in-process inspections to verify dimensions during first article production runs., • Capable of training machine operators on setup sheets, fixturing, and safe operation of new programs., • As Necessary, assist in movement of materials through impacted work centers to ensure customer schedules are met, troubleshoot and address bottlenecked processes/operations., • Maintain revision control for CNC programs and tooling instructions.Manufacturing Lead, • Analyze customer blueprints, 3D models, and specifications to determine manufacturability and generate time/material estimates for quoting., • Develop/Update manufacturing router sequences, Bill of Materials, and Work Centers for new and existing product lines, determining estimated setup and cycle times to maintain an accurate ERP system., • Select tooling, fixturing, and machine allocation based on material and part geometry for the fabrication of machined parts using 2 to 5 axis lathes; 3 and 4 axis horizontal and vertical mills; as well as 5 axis mills and conventional machining equipment, • Collaborate with Customer, Production and Quality teams to ensure DFM (Design for Manufacturability) ensures the most efficient manufacturing methods and techniques. AS9100 compliance., • Organize the machine shop, priorities and workflow to meet customer requirements.Required Qualifications:, • 7+ years of experience in aerospace CNC machining, with demonstrated expertise in CNC programming and setup., • Strong proficiency with Mastercam, or Fusion 360., • Deep understanding of G-code, GD&T, blueprint reading, and aerospace tolerancing., • Experience working in AS9100/AS9102-regulated environments., • Proven ability to estimate machining time, material requirements, and tooling needs for quoting purposes., • Familiarity with various aerospace alloys (e.g., titanium, Inconel, stainless steel, aluminum)., • This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee.Preferred Qualifications:, • Experience in a “Make-to-Blueprint” job shop environment., • Experience and Understanding of Master Routers (i.e. “Item Masters, which require a Bill of Materials and Routing sequences for CNC operations) and/or the willingness/ability to learn., • Working knowledge of MRP/ERP systems (specifically Syteline, or JobBOSS, Epicor, ProShop)., • First article inspection (FAI) process experience per AS9102., • Lean or Six Sigma training is a plus.Key Competencies:, • Strong mechanical aptitude and machining knowledge, • Ownership mindset and initiative in problem-solving, • Ability to work cross-functionally with quality, operations, and sales teams, • Attention to detail in both planning and execution, • Clear, concise technical communication skills (verbal and written)Why Join Us:, • Be a strategic part of launching mission-critical aerospace components, • Hands-on environment with autonomy and impact, • Competitive compensation and benefits package (We Reward Talent), • Fast-paced, growth-oriented company with a strong industry reputation Powered by JazzHR uWG6R0RcKY

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. Senra Systems is hiring a Senior Accountant to help build and own the company's core accounting function during a period of rapid growth and operational scale-up. Reporting to the Head of Strategic Finance, you will be a key early accounting hire — taking ownership of day-to-day accounting operations, supporting the close process, and helping establish scalable processes and controls as the company grows. This is a high-impact, hands-on role for someone who is eager to grow into a broader leadership position over time. You don't need to have all the answers on day one, but you should be excited about building, learning, and owning your work in a fast-moving environment. What you'll own: Own Core Accounting Operations • Execute the monthly, quarterly, and annual close processes, • Maintain the general ledger and prepare GAAP-compliant financial statements, • Support AP, AR, payroll accounting, and expense workflows, • Help design and document accounting processes that support growth, • Identify opportunities to improve efficiency and reduce manual work, • Support ERP and financial system implementation and optimization, • Assist in building out cost and inventory accounting practices, • Support standard costing, variance analysis, and inventory reconciliations, • Help establish and maintain internal controls and accounting policies, • Prepare audit-ready work papers and documentation, • Deliver reliable financial data to support forecasting and planning, • Contribute to management and investor reporting packages Required • 4+ years of accounting experience, ideally including 2–3 years in public accounting (Big 4 or regional firm) and 1–2 years in an industry or startup environment, • Solid U.S. GAAP knowledge and attention to detail, • Hands-on experience with the close process and financial statement preparation, • Comfort working in a fast-moving, resource-constrained environment, • CPA certification (or actively pursuing), • Exposure to manufacturing, hardware, or inventory accounting — even in an audit context, • Experience with ERP systems or accounting software migrations, • Interest in cost accounting and operational finance Within 3–6 Months: • Owning the month-end close process with minimal supervision, • AP, AR, payroll, and expense workflows running smoothly with clear documentation, • Contributing to audit preparation and delivering clean, well-supported work papers, • Supporting the buildout of cost and inventory accounting processes, • Helping identify and implement process improvements that improve close efficiency, • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $110,000-$140,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$110,000—$140,000 USD

Job Description Company Overview Rangeview is on a mission to build the foundry system that reindustrializes America. We exist to break the legacy manufacturing trap by reinventing critical production for the twenty‑first century. Through advanced software, deep automation, breakthroughs in materials science, and modern financing strategies, Rangeview rewrites both the cost curve and the power structure of making metal parts. Job Summary As a Production Engineer, you will take ownership of Rangeview's production processes and turn legacy manufacturing practices on their head in order to create one of the most advanced aerospace foundries in the world. You will dive into operations on the floor in order to develop, qualify, and implement automation solutions that enable Rangeview's vision of a modern manufacturing company. A successful candidate for this role will demonstrate determination, integrity, intellectual curiosity, collaboration, creativity, and comfort challenging the status quo. This position's internal job code is Production Engineer. We are currently hiring for Levels 1, 2, and 3IC. Responsibilities • Review designs for producibility, leading and executing tasks to transition hardware from low-rate initial production to volume production, • Research, design, modify, and test production methods and equipment based on a deep understanding of hardware and software requirements, • Improve production efficiency and effectiveness by analyzing and planning workflows, optimizing space utilization, and maximizing equipment throughput without compromising quality, • Ensure hardware and process quality by establishing standards, designing testing methods, and implementing rate production validation processes, • Inform production strategy by collecting, analyzing, and summarizing process information and trends in order to propose solutions for achieving future throughput/cost targets, • Bachelor's degree in an engineering discipline (ABET accreditation required) or equivalent experience meeting the following:, • Associate's degree in an engineering discipline and 4+ years of investment casting experience, • No degree and 8+ years of investment casting experience, • Strong written and verbal communication skills, • Demonstrated ability to collaborate with all levels of an organization, • Experience aggregating and analyzing technical data to make objective, informed decisions, • Bachelor's degree in an engineering discipline (ABET accreditation required), • 3+ years of experience in manufacturing, mechanical, electrical, or test engineering in aerospace, automotive, or commercial industries, • Experience in the investment casting industry, • Intermediate CAD modeling capabilities, • Demonstrated ability to scale production throughput, • Familiarity with WMS, MES, and ERP systems Please note that the salary information shown below is a general guideline. Salaries are based on demonstrated candidate experience and qualifications, as well as market and business considerations. • Level 1: $85,000-$110,000, • Level 2: $108,000-$132,000 Rangeview offers a competitive benefits package, including equity, unlimited PTO, medical, dental, and vision insurance. Compliance Rangeview is a DDTC-registered, ITAR-compliant business. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Rangeview is an Equal Opportunity Employer; employment with Rangeview is governed on the basis of merit and aptitude and will not be influenced in any manner by any legally protected status.

Job Description Head of Manufacturing - Lead the Scale-Up of Advanced Optical Hardware Production! Gardena, CA | On-site Opportunity Summary A rapidly growing deep-tech startup in Southern California is seeking a Head of Manufacturing to lead the development and scaling of its production operations. The company is building advanced hardware platforms that leverage cutting-edge optical technologies expected to play a central role in next-generation computing, communications, and sensing systems. This role will oversee manufacturing strategy and factory execution as the organization transitions from early production into larger-scale manufacturing. The Head of Manufacturing will drive the design of automated production systems, optimize yield and throughput, and build the engineering organization required to sustain growth. This position is ideal for someone who has scaled complex hardware manufacturing environments and enjoys balancing strategic system design with hands-on problem-solving on the factory floor. About Us We are an emerging technology company focused on enabling the next generation of advanced hardware platforms through innovations in optical systems and high-precision manufacturing. Our mission is to bring advanced technologies out of the lab and into scalable production environments that can support widespread adoption across multiple industries. Our team combines expertise across engineering, manufacturing, and automation to build reliable production systems capable of delivering complex electro-mechanical and optical assemblies at scale. Job Duties • Lead manufacturing engineering strategy and overall production execution across the factory, including line ramp, capacity planning, and readiness for new product introductions, • Develop and deploy automated production cells for precision optical and electro-mechanical assemblies, integrating robotics, alignment technologies, inspection systems, and automated testing, • Partner with product, mechanical, optical, and process engineering teams to transition new products into manufacturing while driving design for manufacturability and design for assembly improvements, • Establish scalable production workflows including line layout, material flow, traceability systems, and inventory management to support increasing production volumes, • Oversee factory data infrastructure and hardware-side MES integration to enable real-time performance tracking, traceability, and data-driven decision making, • Track and improve core factory performance metrics including yield, cycle time, uptime, throughput, scrap rates, and equipment reliability, • Build and lead the manufacturing engineering organization including production engineering and operational leadership roles as the factory grows, • Work closely with supply chain and procurement teams to qualify components and materials while ensuring supplier quality meets production targets, • Develop and maintain process documentation including control plans, qualification procedures, and standardized manufacturing instructions Qualifications • Experience scaling automated production lines beyond pilot builds and early NPI into stable, high-volume manufacturing environments, • Strong background in automation integration, production system architecture, and automated manufacturing cell design, • Demonstrated ownership of production ramp performance including yield improvement and throughput optimization in complex hardware manufacturing, • Experience building and managing manufacturing engineering teams including hiring, mentoring, and organizational development, • Proven ability to collaborate cross-functionally with product development, mechanical engineering, and process engineering groups, • Experience implementing or expanding manufacturing execution systems and production data infrastructure, • Strong analytical and problem solving skills with a data-driven approach to improving factory performance, • Willingness to work extended hours or weekends when necessary to support production milestones Preferred Experience • Experience working with micron-scale assembly, optical alignment systems, or chip and die level packaging processes, • Background in semiconductor, photonics, advanced packaging, or high precision electro-optical manufacturing environments, • Experience scaling manufacturing operations in fast growing hardware companies including launching new production lines or facilities, • Experience integrating factory automation technologies such as robotic handling systems, machine vision inspection, and in-line metrology tools, • Familiarity with statistical process control, process capability analysis, and reliability testing methodologies, • Experience managing relationships with equipment vendors and integrators for specialized or custom manufacturing tools, • Experience operating in cleanroom or controlled manufacturing environments Why Join Us • Opportunity for growth within a rapidly expanding deep-tech company, • Work at the forefront of advanced optical hardware and manufacturing innovation, • High ownership environment with the ability to shape factory strategy and operations, • Collaborative engineering culture focused on solving complex technical challenges, • Flexible work environment, • Strong PTO policy, • Medical, dental, and vision benefits, • 401k retirement plan, • Equity participation opportunities Compensation Details Salary range: $170,000 - $210,000 #LI-AV

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do:The Guidance Navigation and Control (GNC) Engineer will lead the GNC subsystem development life cycle of Space Kinetics platform. From concept development through mission operations, the GNC engineer will be responsible for developing algorithms which can be implemented in FSW, tested in simulation / hardware environments and monitored in flight. The GNC lead will be responsible for the overall subsystem development schedule to include both hardware and software elements. The GNC engineer will work closely with other system elements to define interface requirements for GNC sensors. The GNC engineer will be responsible for owning and maintaining the GNC portion of the Integrated Master Schedule. The role is based on our El Segundo, CA office in an onsite capacity. • Lead architect responsible for GNC design for space applications, • Owns GNC subsystem level requirements, pointing budget and alignments, • Design of algorithms for FSW development, • Creates / Contributes to ground tools for constellation management, • Owns GNC component level hardware trades and selection, • Owns GNC level Verification and Validation (V&V) activities, • Conducts GNC design analysis and Monte Carlo simulations, • Supports / conducts hardware in the loop verification in system testbeds, • Support internal and external design reviews, • Bachelor's degree in Aerospace, Mechanical or Electrical Engineering along with 5+ years of GNC experience., • Prior Spacecraft and Satellite Development and Operations experience., • Experience working with a different engineering departments and teams within the organization., • Prior experience directly interfacing with aerospace customers in the commercial or government sectors., • Experience in modeling and simulation., • Previous schedule management experience., • Experience developing blended attitude solutions from a variety of sensor data., • Previous Flight Software development and test experience., • End to End project lifecycle experience., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information; Ability to maintain or obtain a Government Security Clearance is required. *Our vision is unique, and so is the team we're building. If you're driven to succeed in this role, even if your background doesn't fully align with every qualification, we want your application.Where You'll Be: The position is onsite at our headquarters in El Segundo, CA. Domestic travel may be required (up to ~20% of the year). What We Offer: • Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$135,000—$190,000 USD

Job DescriptionSalary: $170,000 - $220,000 Job Summary The Director of Software Engineering is a key leadership role responsible for the overall technical direction, strategic planning, and execution of the company's software development initiatives. Supported by technical leads and project managers, this leader will drive software design, project execution, shape product strategy, and manage team growth, ensuring our software products and the engineering organization continue to scale effectively while delivering mature, high-quality, and maintainable systems. Essential Job Duties and Responsibilities Leadership & Personnel Management • Provide inspirational leadership and mentorship to the SW Development, SW Quality Assurance, and SW DevOps teams., • Set clear performance expectations, conduct regular evaluations, and foster a collaborative, high-performance team culture, leveraging Agile development methodologies., • Be involved in all aspects of talent management and team building., • Oversee development of program plan estimates and drive teams to meet the plan., • Ensure adequate allocation of resources to support the simultaneous execution of multiple programs and product lines. Technical Strategy & Oversight • Develop and champion the long-term approach for software architecture and design and utilization of AI in software development across all products., • Provide effective and efficient design support through the conceptual design, detailed design, integration, and test phases of the software development lifecycle., • Prepare and present design, analysis, and test case summary materials for both internal and external design reviews., • Oversee the development, integration, and testing of complex system software. Process & Quality Improvement • Drive continuous improvement initiatives in software development processes, utilization of AI in software development, tooling (e.g., Jira, Confluence), and product quality., • Monitor project progress, making timely adjustments to assignments and team structure to ensure on-time completion of assigned tasks., • Ensure all software designs and development activities adhere to company procedures, SW Security protocols, and corporate policies. Business & Program Support • Support business development activities by providing technical leadership and assistance during proposal efforts., • Oversee documentation of software designs, system integration, data collection, and product support as required. Skills and/or Experience Needed • BS or MS in CS/CE/EE or equivalent industry experience., • 10+ years of professional software development experience, with at least 2 years in a technical leadership or management role., • Extensive experience with embedded software coding, algorithm development, and definition of SW requirements., • Experience in C, C++, Java, Linux, MATLAB, Python, Bash and other object-oriented programming languages., • Experience in Agile Development process., • Graphical User Interface design experience is preferred., • Experience in writing detailed test plans and procedures., • Technically proficient in MS Office products. Language Skills • Interpersonal skills to effectively work with internal peers as well as working effectively with suppliers and customers., • Ability to effectively present information in team meetings and design reviews, as needed. Other Abilities • Ability to communicate clearly and effectively in verbal and written form., • Must have substantial reasoning and problem-solving abilities., • Strong analytical skills and solid work ethic. Additional Requirements • Must be eligible to obtain and hold a US DoD Security Clearance in support of US Government contracts/subcontracts. Physical Demands • Ability to travel up to 5% of the time., • This position uses a computer terminal to access, input, and retrieve data., • This position may be subject to frequent or occasional on the job interruptions that may cause a change in immediate priorities and/or work focus., • While performing duties of this position, employees are occasionally required to stand, walk, sit, stoop, reach, and/or bend., • May occasionally lift and/or move parts, files or boxes up to 40 pounds., • May be subjected to occasional irregular or extended work hours., • May be required to sit for extended lengths of time., • Must be able to work in an environment that may be subjected to occasional loud noises, hazardous materials, chemicals and electro-magnetic energy. Salary Range - $170,000 - $220,000 ThinKom offers generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan ThinKom Solutions is an Equal Employment Opportunity Employer. ThinKom Solutions is a Drug and Alcohol-free working environment with a zero-tolerance policy.

Job Description Moonlight Labs is a LA-based technology studio working with select clients to build advanced applications. Our projects demand skills and vision to take advantage of the latest capabilities in our target technology stack. We are expanding our team with senior technologists to help build awesome new applications and drive innovation in our space. You will work with other top-notch developers with advanced skills in a variety of technologies that will be sure to complement your capabilities. If you are looking to level up using modern tech stacks while working with some of the best in your field, then let’s talk. We’re ready to set you on your first mission, so let’s get started! Requirements • BS in Computer Science or equivalent, • Full life cycle development experience in web and/or mobile application development, • Expert-level skill (or strong desire to become expert) in Ruby, • Intermediate understanding of database design, web service architecture, code optimization, user interface best practices, • Love of technology and a wide range of scientific interests, • Experience developing analytics and/or search-based applications, • Large-scale application performance optimization experience, • Make a difference doing work you truly enjoy, • Flexible schedule/vacation time, • Profit sharingCompany DescriptionMoonlight Labs is a LA-based technology studio working with select clients to build advanced applications. Our projects demand skills and vision to take advantage of the latest capabilities in the target technology stack. Our unique studio model creates opportunities for upside participation, schedule flexibility, and personal growth that aren’t readily found in more traditional companies. Moonlight Labs is also the perfect training ground to learn about building robust startups for those that plan to pursue their own enterpreneurial journies in the future.Moonlight Labs is a LA-based technology studio working with select clients to build advanced applications. Our projects demand skills and vision to take advantage of the latest capabilities in the target technology stack.\r\n\r\nOur unique studio model creates opportunities for upside participation, schedule flexibility, and personal growth that aren’t readily found in more traditional companies.\r\n\r\nMoonlight Labs is also the perfect training ground to learn about building robust startups for those that plan to pursue their own enterpreneurial journies in the future.

Job DescriptionSalary: $150,000.00-$190,000.00 Who is DocMagic DocMagic is the leading provider of digital solutions for the eMortgage industry, including regulatory compliance, document generation, eSignature, and complete eClosings. DocMagic has been solving the mortgage industry's toughest challenges with innovative technology solutions since 1987. Today, we continue to lead the industry with award-winning proprietary software, mobile apps, and web-based solutions. Recent awards include HousingWire naming DocMagic a 2025 Tech100 winner for the 13th year in a row, recognizing our innovation in digital lending and our impact on the industry, as well as key employees receiving HousingWire Tech Trendsetter and Vanguard awards. Why Work at DocMagic At DocMagic, our culture is built on teamwork, innovation, and collaboration, which contribute to our reputation for excellence. We are committed to living these values every day. We offer competitive benefits, including comprehensive health coverage, paid time off, company-paid holidays and a 401K with company matching. We also offer on-site wellness classes, snacks and monthly food trucks. But it is not all about work; we believe in building connections, from team-building activities to our employee gatherings, we love coming together to celebrate. Join us and be a part of a team that values innovation and is committed to shaping the future of work. Position Summary We are seeking a highly skilled and experienced Software Developer III to lead front-end development initiatives using Angular. In this senior-level role, you will design and implement advanced UI components, drive front-end architecture decisions, and mentor developers. Youll collaborate cross-functionally to build responsive, accessible, and high-performance web applications that enhance user experience at scale. Essential Functions • Design and development of complex, scalable, and responsive web applications using Angular (v16+)., • Define and Design reusable and modular components, patterns, and front-end frameworks., • Translate UX/UI designs and business requirements into functional and elegant interfaces., • Guide and mentor developers through code reviews and knowledge sharing., • Collaborate with designers, product managers, and back-end engineers to deliver seamless integrations., • Drive best practices in performance optimization, accessibility, and responsive design., • Contribute to front-end CI/CD strategies and testing automation., • Stay up-to-date with front-end technology trends and evaluate their application in projects. Required Qualifications • 5+ years of professional front-end development experience., • Expertise in Angular (v16 or later) and deep knowledge of TypeScript, HTML5, CSS3., • Solid understanding of state management tools like NgRx., • Strong experience integrating with RESTful APIs and working in SPA architectures., • Skilled in front-end testing (unit, integration, E2E) using tools like Jasmine, Karma, Cypress., • Experience with performance profiling and browser debugging tools., • Proficiency with modern front-end tooling: Webpack, npm, Angular CLI. Preferred Qualifications • Experience spearheading projects or front-end development efforts., • Familiarity with design systems, component libraries, and CSS frameworks (e.g., Tailwind, Material)., • Understanding of accessibility standards (WCAG) and cross-browser compatibility., • Familiarity with cloud services (AWS or Azure)., • Exposure to full-stack development and collaboration with backend APIs. Other Skills • Strong guidance and mentorship skills., • Effective communicator with a collaborative mindset., • Self-driven, organized, and adaptable in a fast-paced environment., • Passionate about UI/UX quality and continuous improvement Other Duties In addition to performing the essential functions of the job, this position may require other duties as assigned. Duties, responsibilities, and activities may change at any time with or without notice. #zr

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. CX2 is seeking a skilled RF Hardware Engineer to join our growing team. The ideal candidate will have experience in designing, testing and building RF Systems (Tx / Rx) for RF signals (ex. communications, RADAR, navigation) UHF through X-Band. This role requires an onsite presence in our El Segundo, CA HQ; a remote work environment is not considered for this opportunity.Key Responsibilities • Design, validate & deliver RF payload subsystems: Design, Integration and Testing of Antennas, RF front ends, SDRs and provide validation of operation. Support development and analysis of RF performance metrics., • Own requirements, ICDs, and verification from concept through delivery, • Stay current: Track and insert advances in relevant technologies, SDRs, RF Systems, RF machine learning, and PNT.Qualifications, • BS/MS in Electrical Engineering, Computer Engineering, or related field, • Antenna and receiver design across analog/RF/mixed-signal domains: mixers, PLLs/LOs, gain/linearity/noise trades; ability to turn simulations into reality., • Channelizers & wideband architectures: filter banks, analog/digital down conversion, sample-rate planning, clocking/synchronization., • Willingness to support critical test events that occasionally require extended hours/weekends, • Ability to obtain and maintain a security clearance, • Must be a U.S. Person (see ITAR Regulations below) due to required access to U.S. export-controlled information or facilitiesBonus Points, • PhD in Electrical Engineering, Computer Engineering, or related field, • 5+ years’ experience with EW subsystems and payloads, • EA/ECM technique design (deception, Digital RF Memory, coherent/non-coherent techniques), • Digital Signal processing: Design characterize and deliver channelizers, wideband detection/classification, MIMO/digital-arrays, and algorithms in MATLAB/Python/C++, • Communication / Waveform system design, • RF machine learning for emitter ID, modulation/classification, anomaly detection, PDW creation, • Tools Experience: ADS/AWR/SystemVue, MATLAB/Simulink, Python (NumPy/SciPy), GNU Radio/SDR (USRP/RFSoC), VITA-49; HDL/firmware experience; also helpful (Vivado/Quartus/Libero)., • Clearance: Active Secret or ability to obtain and maintain; TS/SCI eligibility preferred. ITAR/EAR-controlled work. Learn more about Security Clearances here., • Field work: supporting periodic travel for flight tests and customer demonstrations/support, • Mindset: Builder-tester who loves first-principles RF, rapid lab iteration, and getting hardware flying fastWhat We Offer, • Competitive salary, stock options and benefits, including health, vision and dental., • 401K enrollment at 90 days., • Generous PTO + most Federal Holidays observed., • Collaborative and inclusive work environment., • Access to the latest tools and technologies., • High levels of responsibility and autonomy., • Professional growth and development opportunities., • Access to the hardest problems in electronic warfare.ITAR Regulations

Job DescriptionDescriptionAs a Senior Manufacturing Engineer for Tank Weldments at Impulse, you will be responsible for building the primary pressure boundary for Impulse’s new “Helios” kick-stage vehicle. This is a technical role in a development heavy environment, requiring execution on aggressive timelines and rapid design iterations. The senior manufacturing engineer is expected to own design for manufacturability of their hardware and development of the manufacturing process as well as serve as a team subject matter expert and mentor to team members. Responsibilities • Own the entire manufacturing life cycle for assigned projects & hardware, • Own outcome of key design trades and sign off on manufacturing process decisions as part of the design process., • Lead manufacturing capital projects, including new facility activations, automation efforts and new capability development, • Identify manufacturing options to inform new product design. Own requirements associated with the manufacturing process., • Provide subject matter expertise on primary structure manufacturing processes including fusion welding, solid state welding, raw material processing, machining, non-destructive examination, and mechanical joining processes., • Design, build and activate factory production cells. Own factory layouts including material movement, build process flows, lifting and rigging solutions, and facilities requirements, • Optimize and accelerate existing manufacturing processes for tank integration & supporting structures, • Work directly with machinists, welders & technicians to produce hardware that meets all technical requirements. Ideate and execute on projects to improve the technicians’ experience and provide design for manufacturability feedback based on technician feedback., • Provide technical guidance to outside vendors and support supply chain development, • Bachelor's degree in an engineering discipline, • 5+ years professional experience in manufacturing engineering, • 2+ years professional experience in new manufacturing process development, • Professional project management experience in a manufacturing environment, • 10+ years professional experience with pressure vessel fabrication in the aerospace field or similar critical applications, • 10 + years of demonstrated experience with welding (laser, friction stir weld, TIG, etc.) in a production environment, • 5+ years previous experience working within a start-up, • Masters' degree in an engineering disciplineAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation. Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen. The Propulsion Technician’s main responsibility is to execute orbital‑tube welding for satellite propulsion systems. In addition, the technician will be tasked carry out various fabrication, integration, and testing tasks for space‑flight hardware and related support equipment. The role requires the ability to work second shift. This position's internal job code is Propulsion Subsystem Manuf Tech Senior. Our team is currently hiring for Grade 24. **Position Responsibilities: ** * Perform Orbital tube welding for the fabrication of tube subassemblies and final propulsion tank closeouts * Assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures * Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure * Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required * Travel maybe required to support operations identified by program being supported * Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools * Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality * Support in areas defined by Millennium Space System Leadership as business needs require * Crosstrain / mentor new hires * Other duties as assigned This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. **Security Clearance and Export Control Requirements: ** This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. **Basic Qualifications (Required Skills/Experience): ** * Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products) * Minimum 1 year experience of orbital tube welding * High School Diploma/GED * Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications * Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.) * Demonstrates exceptional attention to detail * Ability to lift-up to 35 lbs * Experience with heater, thermistor installations * Experience with using various hand tools and power tools * Experience mixing epoxy materials * Excellent communication and teamwork skills * Proficient with Microsoft Word, Excel, and PowerPoint **Preferred Qualifications (Desired Skills/Experience): ** * 5+ years of Aerospace experience * 5+ years of orbital tube welding experience * 2+ years performing thermal system component installation in aerospace * 2+ years of harness assembly and routing **Conflict of Interest: ** Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process **Drug Free Workplace: ** Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. **Additional Information: ** * This is a union-represented position * This is an hourly position governed by the Cabinet Makers, Millmen and Industrial Carpenters Union (CMM&IC Local 721) * The selected candidate must be able to work any shift, as assigned. * New hires and employees transferring from non-union roles may be required to attend or complete training within their 90-day probationary period. Continued employment is contingent on successfully completing the probationary period. **Shift: ** ** At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Grade 24: $29.42 – $47.09 Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified. Language Requirements: Not Applicable Education: High School Diploma or Equivalent Relocation: Relocation assistance is not a negotiable benefit for this position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 2 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify • E-Verify (English), • Right to Work (English), • Right to Work (Spanish)

Job Description Are you a creative storyteller with a passion for video editing and a love for anime and gaming? Kanarey Productions Inc. is on the lookout for a talented Video Editor to join our dynamic team! As a leader in producing captivating content for the entertainment industry, we aim to create exceptional narratives that connect with audiences around the globe. In this exciting role, you'll be responsible for taking raw footage and transforming it into compelling visual stories that enrich our projects. You'll work closely with our creative team to ensure each video reflects our high standards of quality and creativity. Whether it’s editing trailers, promotional videos, or gaming content, you'll have the chance to showcase your skills and help elevate the overall experience for viewers. If you're ready to make an impact and unleash your creative potential, we want to hear from you! Responsibilities • Edit video projects in a timely manner, ensuring high-quality output that aligns with our vision., • Collaborate with producers, directors, and other team members to understand project goals and creative direction., • Incorporate graphics, sound effects, and music to enhance the storytelling experience., • Review and provide feedback on the initial edits to refine and improve overall production quality., • Manage multiple projects simultaneously while adhering to deadlines., • Maintain organized project files and workflows for efficiency., • Bachelor's degree in Film, Video Production, or a related field., • 2+ years of experience in video editing, ideally within the entertainment industry., • Proficiency in video editing software such as Adobe Premiere Pro, Final Cut Pro, and After Effects., • A strong portfolio showcasing a variety of edited videos that demonstrate your creativity and storytelling abilities., • Knowledge of sound design and color grading techniques., • A passion for anime and gaming that fuels your creativity and understanding of the audience., • Excellent communication skills and an ability to collaborate effectively with a team., • Strong attention to detail and a commitment to producing high-quality work., • Ability to thrive in a fast-paced, deadline-driven environment.

Job Description Join SkyOne Federal Credit Union as a Full-Time Digital Sales Manager in Hawthorne, CA, where your expertise will pave the way for innovative financial solutions that transform our members' lives. This onsite position offers an opportunity to collaborate closely with a dynamic team dedicated to enhancing member experiences through cutting-edge digital strategies. With a competitive salary range of $97,600-$122,000 per year, you will be recognized for your performance and held accountable for driving digital sales growth. This role is perfect for individuals who thrive in a culture of integrity, respect, and continuous improvement, allowing you to make a meaningful impact. Your creativity and strategic insight will be crucial in delivering tailored solutions that truly resonate with our members. Apply today and take the next step in your career journey with a rewarding role at SkyOne Federal Credit Union. What does a Digital Sales Manager do? The Digital Sales Manager at SkyOne Federal Credit Union represents an exciting new opportunity within our Sales department, dedicated to revolutionizing how we engage with members through digital platforms. This transformative role focuses on enhancing digital conversion rates and strengthening member relationships by utilizing data-driven sales solutions. You will leverage our online capabilities—such as banners, tiles, and an automated bot solution—to address our members’ financial needs effectively. Unlike traditional sales roles, this position is performance-driven, with an emphasis on optimizing the digital sales funnel while relentlessly enhancing member engagement through innovative digital experiences. Here, you’ll play a crucial role in ensuring our members receive the meaningful solutions tailored to their needs, all while contributing to a culture of performance and accountability. What matters most To excel as a Digital Sales Manager at SkyOne Federal Credit Union, a diverse skill set is essential. A strong grasp of digital growth strategy and execution is crucial, enabling you to develop and implement sales initiatives across automated bots and data-driven communication tools. Proficiency in utilizing CRM systems and behavioral targeting insights will help you effectively identify, engage, and convert digital leads. Additionally, managing a digital sales pipeline with discipline—prioritizing leads and using data to streamline the process—is fundamental for success. Your ability to recommend the right mix of digital products through a consultative approach will enhance personalization for our members. You'll also need expertise in promoting relevant offers via online banking and executing lifecycle campaigns. Collaboration with marketing and design teams to create action-oriented visuals and copy is vital. Lastly, continuous testing and optimization of messages, along with reporting and analyzing campaign performance, are key to refining strategies for improved member engagement and meeting sales targets. QUALIFICATIONS • Bachelor's degree in Sales, Business Development, or related experience., • 3+ years of experience in digital or traditional sales with proven experience using digital sales tools such as CRMs, lead tracking forms and data-driven cross sell strategies., • Proven success in driving measurable growth through digital sales strategies, CRM optimization, Sales activity tracking and Sales Results., • Excellent written and verbal communication skills., • Data-driven and highly analytical with the ability to translate insights into action., • Deep understanding of financial products, services, and member needs., • Ability to exercise discretion and sound judgment., • Must possess a superior level of member service, be a positive role model, and demonstrate a high level of commitment to the organization. Job Posted by ApplicantPro

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Composites R&D Technician – Chemical Vapor Deposition (CVD) Castelion is hiring a R&D Technician to support its ceramic matrix composite (CMC) pilot line, focused on operating chemical vapor deposition (CVD) reactors. This is a hands-on role involving equipment operation, process monitoring, and consistent execution of reactor runs. Responsibilities include setting up and running cycles, recording process data, and identifying and troubleshooting issues as they arise. Strong attention to detail, adherence to safety protocols, and disciplined documentation are essential. The ideal candidate is comfortable working with complex equipment and control systems, and brings a practical, problem-solving mindset. This role works closely with engineering teams to support process development and improvement. Responsibilities • Supporting of ceramic matrix composite pilot line build and operation, • Monitor, operate and troubleshoot chemical vapor deposition (CVD) reactors, • Industrial equipment operation and maintenance, • Assist process development of chemical vapor deposition process, • Setting up and running cycles for material batches, • Recording process data and notating any specific production anomalies for further investigation, • Trouble shooting pilot line mechanical and electrical issues, • High school diploma, • Must be willing to swing shift (3:30pm to 11:30pm), • Experience operating and serving complex machinery including chemical reactors, high-temperature furnaces, automated composite layup equipment, or petroleum hardware, • 2 years of experience with aerospace composites, • 3-years of experience in the aerospace industry, • Must be willing to work extended hours and/or weekends as needed, • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job DescriptionSalary: $120,000.00-$160,000.00 Who is DocMagic DocMagic is the leading provider of digital solutions for the eMortgage industry, including regulatory compliance, document generation, eSignature, and complete eClosings. DocMagic has been solving the mortgage industry's toughest challenges with innovative technology solutions since 1987. Today, we continue to lead the industry with award-winning proprietary software, mobile apps, and web-based solutions. Recent awards include HousingWire naming DocMagic a 2025 Tech100 winner for the 13th year in a row, recognizing our innovation in digital lending and our impact on the industry, as well as key employees receiving HousingWire Tech Trendsetter and Vanguard awards. Why Work at DocMagic At DocMagic, our culture is built on teamwork, innovation, and collaboration, which contribute to our reputation for excellence. We are committed to living these values every day. We offer competitive benefits, including comprehensive health coverage, paid time off, company-paid holidays and a 401K with company matching. We also offer on-site wellness classes, snacks and monthly food trucks. But it is not all about work; we believe in building connections, from team-building activities to our employee gatherings, we love coming together to celebrate. Join us and be a part of a team that values innovation and is committed to shaping the future of work. Position Summary We are looking for a skilled and motivated Software Developer II with strong proficiency in Java to join our engineering team. You will be responsible for designing, developing, and maintaining robust, scalable, and high-performance server-side applications that power our platforms. Youll work closely with front-end developers, DevOps, and product managers to build and enhance services that serve thousands of users. Essential Functions • Develop and maintain scalable and performant Java-based backend services and APIs., • Collaborate with cross-functional teams to define, design, and ship new features., • Write clean, maintainable, and testable code using modern design patterns., • Optimize application performance, reliability, and scalability., • Participate in code reviews and contribute to the continuous improvement of engineering practices., • Debug and resolve technical issues and production incidents., • Contribute to system design discussions and architecture decisions., • Maintain documentation of systems and processes. Required Qualifications • 4+ years of professional experience in back-end development with Java., • Strong understanding of object-oriented programming principles., • Experience with Spring/Spring Boot and RESTful API development., • Familiarity with relational databases (e.g., MySQL, PostgreSQL,) and ORM frameworks (e.g., Hibernate, JPA)., • Knowledge of version control tools such as Git., • Understanding of software development lifecycle (SDLC), CI/CD, and Agile methodologies., • Familiarity with unit testing frameworks (JUnit, Mockito). Preferred Qualifications • Experience with message brokers (Kafka, RabbitMQ) and microservice architectures., • Exposure to containerization tools (Docker, Kubernetes)., • Familiarity with cloud services (AWS or Azure)., • Experience with Query Optimization, • Experience with Multithreaded implementations, • Experience with Clustered applications, • Exposure to front-end integration (e.g., understanding of APIs consumed by Angular/React apps). Other Skills • Strong problem-solving and analytical skills., • Good communication and teamwork abilities., • Proactive attitude with attention to detail., • Ability to work independently with minimal supervision. Other Duties In addition to performing the essential functions of the job, this position may require other duties as assigned. Duties, responsibilities, and activities may change at any time with or without notice. #zr

Job Description About Castelion Castelion is redefining defense development through rapid iteration, aggressive testing, and modern commercial manufacturing at scale. We design, build, and test next-generation long-range strike weapon systems to give the United States and its Allies a decisive advantage and deter future conflicts. Role Overview The Manager, Propulsion Engineering, plays a central role in delivering high-performance rocket motor systems at speed and scale. This position combines deep technical expertise in solid propulsion with strong engineering leadership, guiding a team responsible for the design, development, and production of solid rocket motor systems and key propulsion components. This leader owns both technical direction and team execution, ensuring designs are robust, manufacturable, cost-effective, and aligned with aggressive program timelines. The role requires someone who can operate decisively in a fast-paced, resource-constrained environment while building a high-performing engineering culture. Responsibilities Technical Leadership & Ownership • Lead the design and development of solid rocket motor primary and secondary structures, propulsion components, and interfaces., • Drive motor design and propellant-related decisions, ensuring performance, safety, manufacturability, and cost targets are met., • Translate program objectives into scalable, production-ready designs aligned with speed and affordability goals., • Oversee CAD models and drawings, ensuring compliance with internal standards and ASME Y14.5 GD&T practices., • Guide rapid iteration cycles, validating designs through testing and enabling fast design evolution., • Provide technical authority for hardware discrepancies, failure investigations, and corrective actions., • Build, lead, and scale a high-performing propulsion engineering team., • Establish and reinforce a strong engineering culture focused on ownership, accountability, and execution., • Mentor engineers across experience levels, fostering both technical depth and independent decision-making., • Ensure the team delivers high-quality work on aggressive timelines with clarity of priorities and accountability., • Communicate effectively with customers, leadership, and cross-functional teams., • Navigate and collaborate with government stakeholders and program partners., • Ask tactful but critical questions to uncover risks, challenge assumptions, and improve outcomes., • Stay close to the hardware by supporting assembly, integration, testing, and troubleshooting., • Provide expert guidance during prototype builds and production ramp-up., • Bachelor's degree (or higher) in aerospace, mechanical, materials, manufacturing engineering, physics, or related field., • 7+ years of experience in propulsion, mechanical systems, or fluids design, analysis, or testing., • Demonstrated experience in rocket motors or propulsion systems., • Proven ability to lead projects or small teams in a technical environment., • Deep expertise in solid propulsion, including:, • Motor design, • Propellant formulation and behavior, • Experience with liquid propulsion systems (as a complement to a strong overall propulsion background)., • Hands-on experience with rapid product development and high-rate manufacturing., • Proficiency in CAD tools (NX, Creo, CATIA) and GD&T per ASME standards., • Experience with aerospace materials (metals, composites, plastics)., • Familiarity with insensitive munitions standards and practices. Benefits And Perks All full-time employees are granted meaningful long-term equity, sharing in the company's significant growth trajectory. We offer four (4) weeks of paid time off, ten (10) company-paid holidays, and comprehensive health benefits - including 100% employee-covered medical and strong dependent coverage, along with dental and vision plans. We also provide paid parental leave to support growing families, a $100 monthly fitness stipend to promote health and performance, and onsite EV charging for convenience. In addition, employees enjoy perks like catered meals, company-covered food during high-demand periods, and a fully stocked kitchen to stay fueled throughout the day. While this position does not currently require a U.S government-issued security clearance, it may in the near future. Therefore, the ability to obtain and maintain a U.S. government–issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Affirmative Action/EEO Statement Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $80,000 - $125,000 We are seeking a motivated Project Engineer/Assistant Project Manager to support the successful delivery of construction projects from preconstruction through closeout. This role works closely with the Project Manager, Superintendent, and field teams to coordinate technical and administrative aspects of the project. The Project Engineer/Assistant Project Manager plays a key role in managing documentation, facilitating communication, and ensuring projects are delivered on time, within budget, and in accordance with plans, specifications, and quality standards. Job Duties and Responsibilities: • Support the Project Manager and Superintendent in coordinating project activities and trade partners, • Participate in project meetings, track action items, and ensure follow-through, • Manage RFIs, submittals, procurement, and shop drawings, ensuring timely and accurate processing, • Maintain organized project documentation, logs, and records in Procore or similar systems, • Assist with project scheduling, tracking progress, and identifying potential delays, • Support change order management, cost tracking, and budget alignment, • Review drawings and specifications to identify conflicts or missing information, • Coordinate inspections, permits, and compliance documentation, • Assist field teams in maintaining quality standards and resolving issues, • Promote and support jobsite requirements and safety initiatives Qualifications: • Bachelors degree in Construction Management, Engineering, Architecture, or related field (preferred), • 13 years of construction experience in a project engineering or coordination role, • Familiarity with construction documents, RFIs, submittals, and project workflows, • Proficiency with Procore, Bluebeam, Microsoft Project, Excel, or similar tools, • Ability to read and interpret plans, specifications, and shop drawings, • Strong organizational, communication, and time management skills, • Collaborative, solutions-oriented mindset, • Valid drivers license and ability to travel to project sites Why Join Us: • Hands-on experience on complex construction projects, • Direct mentorship from experienced Project Managers and Superintendents, • Clear path for career growth and advancement, • Collaborative team environment with strong leadership support, • Competitive compensation and benefits What We Offer: • 401K with matching, • Healthcare, • Paid vacations and holidays, • Performance bonus About Us: We are a General Contractor with over 30 years of experience delivering complex public and institutional projects across K12, higher education, healthcare, and civic markets. Much of our work occurs in active, occupied environments where planning, coordination, and accountability are critical. We deliver projects across all major delivery methods, including CM Multi-Prime (CMMP), Lease-Leaseback (LLB), Design-Bid-Build, and Design-Build. We tailor our approach to meet the needs of each client and project. Our focus on disciplined preconstruction, clear scope definition, and proactive coordination drives cost certainty, schedule reliability, and high-quality outcomes. Our teams take ownership of the work. We solve problems early, coordinate across all trades, and follow through to completion, earning repeat clients and long-term relationships built on trust and performance.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Integrated Assembly Supervisor is responsible for leading and coordinating assembly operations across automotive, aerospace, and defense manufacturing programs, within additive manufacturing (AM). This role ensures efficient production workflows, adherence to strict quality and regulatory standards, and the successful incorporation of advanced manufacturing technologies into assembly processes. The ideal candidate combines hands-on leadership with deep technical knowledge in both traditional and additive manufacturing, ensuring seamless hybrid production environments. The Role Supervision & Leadership • Lead, train, and supervise a cross-functional team of assembly technicians and operators., • Foster a culture of safety, quality, accountability, and continuous improvement., • Coordinate staffing, scheduling, and resource allocation to meet production targets., • Strong problem-solving and decision-making skills., • Ability to lead in a high-mix, low-volume and/or high-volume production environment., • Excellent communication and team-building abilities., • Oversee assembly processes that combine additively manufactured and traditionally manufactured components., • Ensure proper handling, finishing, and integration of AM parts (e.g., inspection, fitment)., • Support the implementation and scaling of additive manufacturing technologies, • Ensure compliance with material traceability, build documentation, and process validation requirements., • Ensure all products meet industry standards including automotive (IATF 16949), aerospace (AS9100), and defense regulations., • Drive lean manufacturing initiatives, including 5S and waste reduction strategies., • Analyze production data and KPIs to improve efficiency, throughput, and quality., • Work closely with design engineering, quality, supply chain, and maintenance teams., • Support new product introduction (NPI) and prototyping efforts involving AM components., • Interface with customers and auditors as needed. Basic Qualifications, • Demonstrated proficiency in manufacturing/assembly supervision within automotive, aerospace, or defense industries., • Proven experience with manufacturing technologies and hybrid production environments., • Familiarity with precision assembly, tight tolerance systems, and high-reliability components., • Experience with documentation, traceability, and audit readiness., • Knowledge of GD&T, blueprint reading, and inspection techniques., • Experience with ERP/MES systems and production tracking tools., • Exposure to digital manufacturing tools., • Ability to lawfully access information and technology that is subject to US export controls Preferred Qualifications, • Working knowledge of AS9100, ITAR, NADCAP, and/or IATF 16949 standards., • Experience with post-processing of AM parts (heat treatment, machining, surface finishing)., • Strong understanding of additive manufacturing processes (metal), • Siemens NX or other CAD software(s) Work Environment, • Manufacturing floor environment with exposure to machinery, noise, and materials., • May require use of personal protective equipment (PPE)., • Occasional overtime and weekend work based on production needs. Compensation, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionDrive Aerospace Innovation — Join Us as an Integration Tool Engineer / Project Management Professional PDS Tech Commercial is hiring an experienced Integration Tool Engineer / Project Management Professional to support our partnership with a leader in the aviation and defense industry in El Segundo, California. If you excel at balancing engineering, cost, schedules, and cross-functional leadership while driving complex projects to completion, this is your opportunity to make a measurable impact. In this role, you’ll help manage tooling programs essential to aircraft component manufacturing, ensuring projects stay aligned to cost, schedule, and technical objectives. Your leadership and coordination skills will directly contribute to mission-critical aerospace programs. What You’ll Do As an Integration Tool Engineer / Project Management professional, you will oversee tooling scopes of work while supporting Control Account Manager (CAM) responsibilities across multiple programs. Key responsibilities include: • Learn and understand the engineering and technical aspects of tooling used to manufacture aircraft components, • Coordinate with cross-functional Integrated Program Teams (IPTs) to meet cost, schedule, and technical goals, • Manage multiple tooling projects involving in-house and offsite fabrication teams, • Perform Control Account Management (CAM) duties and support program execution, • Track budgets, forecasts, actual costs, and Earned Value Management (EVM) metrics, • Update EVM systems and generate required cost/schedule performance reports, • Review monthly earned value data and provide account status updates, • Coordinate with scheduling teams to develop and maintain Integrated Master Schedules (IMS), • Provide weekly IMS updates, attend status meetings, and support stakeholder reviews, • Process change requests in partnership with business management and scheduling teams, • Support logistics planning, staffing forecasts, and resource requirements, • Lead internal meetings to align staffing with approved baselines, • Perform schedule risk assessments and help mitigate cost or timeline risks, • Monitor project execution including requirements traceability, SOW breakdowns, action item tracking, and leadership presentationsRequired Qualifications, • Bachelor’s Degree in STEM (Science, Technology, Engineering, or Mathematics), • Must be eligible to obtain a Security Clearance., • This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license., • Proficiency with Microsoft Office applications including Excel, Word, Project, and PowerPoint, • Strong communication skills with the ability to engage all levels of the organization, • Excellent presentation and stakeholder communication abilities, • Ability to manage multiple priorities in a fast-paced environmentPreferred Qualifications, • Prior aerospace, aviation, or defense industry experience, • Experience with Earned Value Management (EVM) systems, • Experience with Control Account Management (CAM) responsibilities, • Project management experience in engineering or manufacturing environments, • Familiarity with tooling design, fabrication, or manufacturing operations, • Strong analytical and financial forecasting skillsSchedule & Pay, • Location: El Segundo, CA 90245, • Job Type: Full-Time Consultant (6 -Month Assignment), • Schedule: Monday–Friday, • Competitive compensation, • Experience supporting high-profile aerospace programs, • Exposure to advanced engineering and manufacturing operations, • A collaborative, innovation-driven work environment, • Opportunities to expand your project management and leadership expertise Pay Details: 31.43 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionJob Summary: The Quality Systems AI Manager (QSAIM) is a subject-matter expert responsible for designing, implementing, and continuously improving the Quality Management Systems (QMS) and processes within PML’s over the counter (OTC) drug and cosmetic manufacturing environment. This role sits at the intersection of regulatory compliance, operational excellence, and emerging AI technology — embedding intelligent automation into investigation management (Deviations, OOS, Complaints), CAPA, change control, supplier quality, validation, and audit-readiness programs. The ideal candidate is a quality professional with deep Quality Systems knowledge (FDA 21 CFR Parts 210/211, ICH Q10, USP standards) who is equally comfortable piloting machine-learning tools, evaluating AI-powered inspection platforms, and coaching cross-functional teams on data-driven quality culture. This hands-on leadership role combines strategic and risk-based quality system management with AI technologies to improve efficiency while maintaining compliance and implementing continuous improvements to ensure product safety, efficacy, and regulatory compliance throughout equipment, systems and process lifecycles. This position requires a detail-oriented leader who can balance AI-based operational excellence with regulatory requirements in a fast-paced, client-focused manufacturing environment. Essential Duties and Responsibilities: AI-Enabled Quality Systems & Continuous Improvement • Lead the evaluation, validation, and deployment of AI/ML tools for real-time process monitoring, anomaly detection, and predictive quality analytics., • Partner with Technology team and data engineering teams to build automated dashboards that surface quality KPIs, such as but not limited to supplier quality, deviation/OOS/Compliant trends, and signals from data streams., • Champion the use of Natural Language Processing (NLP) based tools for intelligent metric trending in various areas of quality systems, such as root-cause analysis and classification, risk-based supplier qualification assessments and CAPA effectiveness prediction., • Design and execute AI models or templates for various quality-controlled documents, such as process validation protocols and reports, equipment qualification protocols and reports (IQ/OQ/PQ), investigation reports, supplier qualification assessments, aligned with GAMP 5 and FDA Computer Software Assurance (CSA) guidance as required., • Identify and eliminate non-value-added quality activities through Lean/Six Sigma methodologies supported by data analytics., • Facilitate cross-functional improvement teams; track benefit realization via documented continuous improvement (CI) project portfolios., • Develop and report on key metrics related to areas of responsibility, including statistical analysis as needed.Training, Culture & Cross-Functional Partnership, • Develop, review, write, and implement SOPs for new AI-Enabled Quality Systems and processes., • Develop and deliver training curricula for new quality systems or processes, including modules on AI tool usage within a regulated environment., • Serve as internal quality consultant to manufacturing, R&D, supply chain, and commercial teams., • Mentor junior quality associates; foster a continuous-improvement mindset across the organization., • Participate in management review and quality review meetings; prepare quality performance summaries as required., • Partner with Quality, Manufacturing, Engineering, R&D, Supply Chain, Commercial teams and site leadership to resolve technical issues, support process improvements, and foster a culture of compliance., • Maintain and demonstrate expertise in applicable regulatory requirements GMP, FDA regulations (21 CFR Parts 11/210/211), and ISO 22716 for cosmetics and OTC drug products., • Willingness to travel to company facilities as needed, up to 50%., • Bachelor’s degree in STEM, Pharmaceutical Sciences, Chemical Engineering, or a related scientific discipline., • 5+ years of quality systems, quality assurance, or quality engineering experience in OTC drug manufacturing environment., • Demonstrated working knowledge of quality systems and regulatory requirements (21 CFR Part 11/ 210 / 211), including data integrity practices., • Hands-on experience managing and leading QMS and cross functional teams., • Practical experience applying data analytics or AI/ML tools in a manufacturing or quality context (e.g., predictive analytics, NLP)., • Exceptional analytical and problem-solving abilities, excellent leadership, communication and technical writing skills., • Strong organizational abilities, attention to detail, and the ability to manage multiple priorities in a fast-paced environment., • Ability to lift and move objects weighing up to 25 pounds regularly and occasionally heavier items with assistance., • Ability to stand, walk, bend, stoop, push, and pull for extended periods during shifts., • Good understanding of safety protocols and practices. Powered by JazzHR AINh19Wgfm

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Lead the Manufacturing Development Engineering team responsible for productionizing Divergent's advanced manufacturing, additive manufacturing, and automation systems from prototype through full-rate production. This role owns the scalable industrialization of complex capital equipment and factory modules, ensuring systems are developed, commissioned, and transitioned into reliable, manufacturable, and repeatable production assets capable of supporting high-rate deployment across Divergent's DAPS ecosystem. This role will drive manufacturing readiness, process maturity, operational scalability, and production execution to achieve aggressive cost, throughput, quality, reliability, and uptime targets while enabling rapid factory expansion and replication. The Role • Lead the Manufacturing Development Engineering organization supporting LPBF systems, automation equipment, and advanced manufacturing modules., • Drive productionization of advanced manufacturing systems from proof of concept through pilot, commissioning, and manufacturing at rate., • Develop scalable manufacturing processes, tooling, documentation, and operational standards to support factory growth and repeatable deployment., • Partner cross-functionally with hardware design engineering, software engineering, technician team, quality, supply chain, and production teams to improve manufacturability, reliability, throughput, and uptime., • Own manufacturing engineering KPIs including build rate, throughput, OEE, first-pass yield, downtime reduction, cost, and production readiness., • Own Ops escalations, issue triaging, feedback loops, and field service engineering-related activities, • Lead equipment bring-up, RCCA activities, process improvements, and factory integration efforts., • Support implementation and optimization of systems to support manufacturing scalability., • Lead organizational planning including hiring, mentorship, prioritization, and team development. Leadership & Management • Drive Divergent's performance culture by leading high-performing teams with clear expectations, actionable real-time feedback, accountability, and a commitment to company success., • Model Divergent's core values of Respect, Clarity, Winning Spirit, Commitment, and Interdependence through disciplined execution, transparent communication, decisive action, and cross-functional collaboration. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls and willingness to support defense-related programs and manufacturing activities., • Bachelor's degree in Mechanical Engineering or related discipline., • 7+ years of experience in manufacturing engineering, capital equipment development, or similar., • 4+ years of engineering leadership experience in fast-paced development and production environments., • Experience productionizing complex electromechanical systems from prototype through manufacturing at rate., • Strong background in manufacturing process development, DFM, RCCA, tooling, commissioning, and production ramp activities., • Strong cross-functional leadership, communication, and organizational skills., • Highly adaptable, resourceful, collaborative with an extreme ownership mentality. Preferred Qualifications, • Experience with LPBF additive manufacturing systems, robotics, advanced manufacturing, or capital equipment., • Experience with NX CAD, Teamcenter PLM, and MES., • Experience supporting factory scale-up, replication, or multi-site manufacturing deployment. Work Environment, • On-site in office, manufacturing floor, and laboratory spaces, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description We are seeking a Senior Data Engineer to join our team in El Segundo, CA to build and integrate large data sets of space, air, and ground systems focuses on building high-assurance, resilient pipelines that synchronize data across multi-domain environments. Program Overview Location: El Segundo, CA Clearance: Must possess an active U.S. Government Top Secret clearance and eligible for SCI, which only a U.S. citizen can obtain What You’ll Do • Multi-Domain Data Integration: Design and implement end-to-end pipelines that ingest and normalize data from disparate sources, including satellite payloads (space), aerial sensors (air), and terrestrial stations (ground)., • High-Assurance Pipeline Development: Build highly reliable, scalable data structures capable of operating within the strict technical and security constraints of classified networks (e.g., Cross-Domain Solutions)., • Protocol & Standard Management: Work with industry-standard space and ground protocols such as CCSDS, XTCE, and MIB to manage command and telemetry data., • Real-Time Data Operations: Monitor and automate real-time data feeds, ensuring the timeliness and integrity of mission-critical "data brokering" between producers and consumers., • Infrastructure as Code (IaC): Deploy and manage data clusters in secure, containerized environments (Kubernetes) and cloud ecosystems like AWS GovCloud using tools like Terraform or Ansible., • Development of Interface Control Documents (ICD), • Development of APIs (Application Programming Interface) Why Join Us? • Work on cutting-edge technology in a secure, mission-focused environment, • Be part of a team that values innovation, collaboration, and growth, • Comprehensive benefits, paid time off, and 401K w/ matching What We’re Looking For • Security Clearance: Must possess an active U.S. Government Top Secret clearance and eligible for SCI, which only a U.S. citizen can obtain, • Education: Bachelor's degree in Computer Science, Information Technology, or related field, • 5+ years of experience in data engineering, • Experience integrating data from multi-domain environment., • Familiarity/Experience w/ DevSecOps Engineering, • Experience with AI tool development, • Experience developing ICD and APIs., • Experience working in a fast-paced new development environment utilizing cutting edge technology to achieve desired results.

Job Description Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation. Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen. We are seeking highly motivated applicants to join our world-class team and help create the future of affordable, reliable space systems. We are looking for candidates who have demonstrated practical problem-solving and technical experience in their previous roles. Your work will be vital in transitioning a design to a real-life, mission-capable constellation of fully assembled satellites. The Assembly, Test, and Launch Operations (ATLO) Team plans and executes all space vehicle-level integration and test activities at Millennium. ATLO creates the detailed flow of activities throughout the buildup of the space vehicle, writes and executes all test and assembly procedures used in these activities, conducts system-level through environmental testing, and performs integration to launch vehicle. The Senior ATLO Engineer will collaborate with many teams such as Programs, Engineering, Manufacturing, Facilities, and Security to shape the direction of satellite production and help the company meet delivery targets, while maintaining a high standard of technical excellence in the assembly and test of satellites. The Senior ATLO Engineer is invited to improve the efficiency of current processes and play a critical role in developing satellites for manufacturability and large-scale constellations. A Senior ATLO Engineer will report functionally to an ATLO Team Lead and serve under or as an ATLO program lead. The ideal candidate is highly collaborative and a proactive problem-solver with experience in spacecraft integration, hardware-software integration, test systems, or production automation. Rotating Shift: This position requires employees to work various shifts on a rotating basis. The shift times are subject to change and additional shifts may be added in accordance with company needs, but employees will only work one shift per day. Each standard shift is 9.5 hours in length, 0.5 hours of which is designated for a lunch break. Shifts contain 9 hours of work to follow the Millennium 9/80 calendar, meaning every other Friday is a non-working day. The standard shift times are listed below. * First Shift: 0600 – 1530 * Second Shift: 1430 – 0000 This position's internal job code is Systems Engineer. Our team is currently hiring for levels 3 and 4. **Position Responsibilities: ** * Lead the planning and execution of a satellite program from assembly through launch * Review initial engineering drawings and schematics to anticipate build challenges, and reach back into the company’s early-design processes or proposal activities to create manufacturability improvements downstream * Interface with technicians, quality inspectors, and engineers in a cleanroom as needed to guide the troubleshooting of non-conformances and corrective actions, and provide go/no-go judgment and rationale * Integrate, test, and troubleshoot development platforms for flight vehicles to generate high-quality procedures and understand the functions of the system * Act as a signature authority on test and assembly procedures, process plans, and new program initiatives * Lead environmental testing of satellites (EMI/C, Dynamics, TVAC) and launch integration campaigns, including select responsibilities for overarching plans, maintaining schedule, and staffing * Drive improvements to increase production throughput, reduce space vehicle build hours and quality issues, and remove waste from complex processes * Utilize statistical and analytical tools to monitor performance metrics of teams and product execution plans **Basic Qualifications (Required Skills/Experience): ** * Bachelor’s degree in any Engineering or related field * Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience * Minimum of 5+ years’ experience in manufacturing, mechanical, electrical, test engineering, materials and process engineering, or similar field in Aerospace, Automotive, or Commercial industries. * Bring expertise to one of the following areas: medium-rate production (10-100 complex products per year), mechanical integration, electrical testing, spacecraft integration, program leadership, industrial operations, or systems engineering * This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. **Preferred Qualifications (Desired Skills/Experience): ** * Minimum of 7+ years’ experience in space systems * Knowledge of satellite manufacturing engineering principles, standards, and concepts. * Experience writing work instructions and procedures for critical aerospace parts in a production environment * Experience with common hardware-integration tools such as NI LabVIEW, DAQ hardware, electrical power supplies, signal analyzers, and multimeters. * Experience with version control, understanding of basic software concepts, Python, C++, Linux environments, and computer network architecture. * Proficiency with statistics, data analysis, cost/benefit analysis, business intelligence, and data visualization (e.g. PowerBI, Tableau) * Proficiency in tracking tools such as MRP/ERP, Jira, MS Project, manufacturing execution systems, Teamcenter/PLM, and configuration management. * Experience with CAD software and engineering drawings * Strong written and verbal communication skills, ability to make presentations to engineering, team members, customers, and management. * Experience working with a union represented workforce * Willingness to work different shifts, travel to launch site/integration locations, and to support critical mission milestones when surge support is needed * Active TS/SCI Clearance **Conflict of Interest: ** Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process **Drug Free Workplace: ** Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. **Total Rewards: ** At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: * Level 3: $119,000 - $177,000 * Level 4: $146,000 - $215,000 Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified. Applications for this position will be accepted until May. 13, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Why Castelion, Why Now Castelion is moving incredibly fast to develop and deliver advanced defense systems at a time when execution matters more than ever. We believe focus and technical excellence are decisive advantages - and we are building a team that can deliver real capability, not just concepts. This is a rare opportunity to join at an early stage, where your work will directly shape critical systems, influence major technical decisions, and have immediate, real-world impact. Weapons Integration Engineer (Multiple Levels) As a Weapons Integration Engineer you will be part of the team that ensures Castelion weapon systems integrate seamlessly with ground launchers, tactical/multi-role aircraft, and future systems. You will own platform integration efforts from early concept and capability studies through prototype development, test, and operational deployment - collaborating with propulsion, avionics, GNC, software, flight test, and manufacturing teams to deliver mission-ready solutions. • Weapons Integration Engineer, • Sr. Weapons Integration Engineer, • Weapons Integration Engineer, Mission Systems, • Weapons Integration Engineer, Airworthiness & Certification, • Weapons Integration Engineer, Launcher & Platforms, • Serve as the primary technical liaison between Castelion and government customers, platform manufacturers, and other external stakeholders to ensure alignment between mission requirements and system designs., • Support development of advanced weapon concepts and technologies, with emphasis on missile integration for ground launchers and tactical aircraft., • Develop, maintain, and execute fast-paced integration plans and schedules to deliver and field weapon systems., • Lead mission planning, verification, and test efforts (including live-fire and flight tests): pre-test analysis, real-time mission support, and post-test evaluation and reporting., • Review and assess interface specifications, drawings, and design documents for functional, electrical, software, and physical interfaces; identify and close interface gaps., • Collaborate across internal engineering teams (propulsion, avionics, GNC, software, flight test, manufacturing) to perform design trades and optimize overall system performance with a focus on platform compatibility., • Develop and coordinate technical specifications, integration documentation, and certification/supporting artifacts required for customer acceptance and regulatory compliance., • Represent Castelion at customer meetings, design reviews, test campaigns, and demonstrations. Weapons Integration Engineers at Castelion operate across the full system lifecycle, from early concept through deployment. While all engineers are expected to maintain strong system-level ownership, individuals may develop deeper expertise in one or more of the following areas: • Bachelors degree in aerospace, mechanical, electrical engineering, physics, or related technical field., • 2+ years experience in systems engineering, mission/weapon integration, or related roles within defense or aerospace., • 2+ years experience in technical project management or weapons system development., • Hands-on experience with launch vehicles, weapons systems, system integration, or aerospace defense platforms, • Experience working with the DoD or other national security agencies., • Strong analytical skills: ability to synthesize complex technical information and communicate effectively to engineers and non-technical stakeholders, • Ability to obtain and maintain Top Secret/SCI clearance, • Masters degree in a relevant technical field., • Hands-on experience with hypersonic weapons, missile defense, or platform integration, • Strong background in mission design, development, integration, and test for missiles, spacecraft, or similar systems, • Demonstrated success integrating weapons or sensors with tactical aircraft and/or ground-based launch systems, • Ability to put in extended hours, including evenings and weekends, when required to meet aggressive timelines Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits and Perks All full-time employees are granted meaningful long-term equity, sharing in the company's significant growth trajectory. We offer four (4) weeks of paid time off, ten (10) company-paid holidays, and comprehensive health benefits - including 100% employee-covered medical and strong dependent coverage, along with dental and vision plans. We also provide paid parental leave to support growing families, a $100 monthly fitness stipend to promote health and performance, and onsite EV charging for convenience. In addition, employees enjoy perks like catered meals, company-covered food during high-demand periods, and a fully stocked kitchen to stay fueled throughout the day. Affirmative Action/EEO Statement Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Avionics Manufacturing Specialist Castelion is looking for an Avionics Manufacturing Specialist, reporting to the Lead Manufacturing Engineer of Avionics, to support the development and production of systems required for long-range hypersonic strike vehicles. This will be a full-time, exempt position located in our Torrance, California facility. As an Avionics Manufacturing Specialist, you will work closely with engineering and manufacturing teams to execute highly technical electrical builds, while owning critical aspects of tooling, process development, work instruction creation, and test infrastructure. Responsibilities • Work with avionics engineering by rapidly iterating electronic components and cables, • Construct wire harnesses, perform PCBA rework, assemble and test racks/systems, electro-mechanical units, and test equipment, • Own the development, maintenance, and continuous improvement of manufacturing tooling, • Create, document, and maintain detailed work instructions to ensure repeatable, high-quality builds, • Drive process improvements focused on efficiency, repeatability, and first-pass yield, • Own portions of test infrastructure, including setup, documentation, and continuous improvement of test processes and equipment, • Create and document testing systems and cable diagrams according to engineer-selected testing gear, • Collaborate closely with engineering to transform concepts into manufacturable solutions, • Monitor work progress against standards and deliver on schedule, • Interpret and execute work from drawings, procedures, and regulated documentation, • Understand complex cable harnesses, wiring diagrams, and GD&T, • Verify flight hardware and document results, • Support transition from development builds into initial production, • 5+ years of avionics technician or manufacturing experience, • Experience reading PCBA schematics and executing rework, • Capability to rework 0201 SMD and BGA components in tight spaces, • Experience reading wiring harness drawings and building flight or lab hardware, • Knowledge of industry standards such as IPC-610 and IPC-620, • Proficient with test equipment such as multimeters, oscilloscopes, and signal generators, • Experience creating clear, effective work instructions for manufacturing or assembly processes, • Experience improving manufacturing or assembly processes (yield, efficiency, or repeatability), • Experience owning or supporting electrical or avionics test processes and infrastructure, • Experience in a research and development environment, • Previous involvement in a high-speed production environment, handling flight hardware, • Prior involvement in a high-output environment, involving hands-on experience in constructing cables, electro-mechanical devices, or building prototypes, • Ability to acclimate to frequently changing assignments and a fast-paced working environment, • Excellent communication skills, both written and oral, along with effective teamwork abilities, • Superb focus and attention to detail, with remarkable work efficiency and accuracy, • Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging, • Expertise in manufacturing and repairing intricate testing systems, • Familiarity with Atlassian tools such as SVN, Confluence, and JIRA, • Basic comprehension of electronic principles and theory, • Must be willing to work extended hours and/or weekends as needed, • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description Position Summary: Sonic Industries, Inc. is a leading aerospace fastener company. RBC Bearings is a premier global supplier of custom engineered, precision products to the aerospace and defense industries. RBC Sonic have an immediate opening for a Quality Engineer. The Quality Engineer utilizes a wide range of knowledge and skills to participate in Quality Engineering and Continuous Improvement projects and programs. The Quality Engineers are the point of contact for all interfacing of Quality Assurance issues with the respective internal customers. Support for technical and programmatic issues with Inspection (QC). Key Position Responsibilities: The duties and responsibilities include, but are not limited to, the following and must be performed with limited supervision. • Prepares inspection procedures and determines appropriate inspection points., • Reviews work orders and complete instructions specifying inspections to be performed., • Performs Preliminary Reviews of Non-conformance Inspection Reports and evaluates in-process rejections IAW QA Process Procedures for Non-conforming Material and MRB Activity., • Performs Contract Reviews., • Generates Customer MRB Tags and submits to respective Program Customer Interface., • Has control of respective program non-conforming parts and material in and out of MRB Bond Room., • Maintains Metrics and prepares reports for management on quality trends, • Leads interdisciplinary teams to address quality problems., • Assumes primary responsibility for managing moderate size projects., • Responsible for executing projects in conformance with established policies, practices, and procedures; may develop new practices and procedures when necessary., • Responsible for preparation and submittal interface with Customer MRB Reject Tags., • Works independently and uses professional judgment and with limited need for supervision. The successful candidate for this job must have educational training and working experience in Quality Assurance or performed at a Quality Engineer working level in a DOD, FAA, Aerospace, Product Manufacturing or Design to Prototype business. • Knowledge and experienced in the Quality Assurance disciplines., • Knowledge and experience with drawing interpretation and inspection activities, manufacturing processes and evaluation of problem-solving techniques., • Knowledge of aerospace specifications., • Knowledge of complete manufacturing processes related to product or functional area., • Must be computer literate in MS Office, Software utilities and application programs., • Must have experience interfacing with external customers., • Ability to communicate effectively, in writing and verbally., • Ability to work in a “TEAM” teaming environment., • Ability to plan, organize, and coordinate all activities necessary for effective project execution by other project participants, vendors, and sub-contractors., • Ability to coordinate activities with multiple groups., • Ability to analyze and interpret incomplete information; adapts problem-solving approach to variable situations; determines project direction through evaluation of diverse information., • Bachelor’s degree in related field, Business or Technical., • Preferred mechanical hardware experience, use of gauges, micrometers, and calipers., • Master’s degree in a related field., • Knowledge of mechanical engineering, e.g., reliability; maintainability; producibility; cost analysis; requirements analysis and flow down, etc., • Knowledge of division products and advanced knowledge of functional or technical area (and all associated processes and documentation). Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: Employees will participate as required in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100C and/or ISO-9001:2008 requirements. Physical Requirements/Working Conditions: This is primarily a sedentary office position with employees working in a controlled office environment. The incumbent answers telephone calls and occasionally bends, reaches, and pushes and pulls file drawers to file records and reports. Employee moves throughout the building to collect, deliver, and copy documents. The position uses a computer terminal to access, input, and retrieve data. Finger dexterity may be required to operate typewriter, computer keyboard and calculator. Employer’s Statement: This job description does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this job description. The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. RBC Bearings / Sonic Industries, Inc. Sonic is an Equal Opportunity Employer m/f/d/v Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Torrance, CA 90502 (Preferred)

Job DescriptionDescriptionAs a Manufacturing Engineer for Tank Weldments at Impulse, you will be responsible for building the primary pressure boundary for Impulse’s new “Helios” kick-stage vehicle. This is a technical role in a development heavy environment, requiring execution on aggressive timelines and rapid design iterations. The manufacturing engineer is expected to own design for manufacturability of their hardware and development of the manufacturing process. Responsibilities • Own the entire manufacturing life cycle for assigned projects & hardware, • Own selection of manufacturing processes during the hardware design phase. Identify manufacturing options to inform design. Own requirements associated with the manufacturing process., • Provide subject matter expertise on primary structure manufacturing processes including fusion welding, solid state welding, raw material processing, machining, non-destructive examination, and mechanical joining processes. Participate in design trades and sign off on key decisions on how hardware is made., • Design, build and activate factory production cells. Own factory layouts including material movement, build process flows, lifting and rigging solutions, and facilities requirements, • Optimize and accelerate existing manufacturing processes for tank integration & supporting structures, • Work directly with machinists, welders & technicians to produce hardware that meets all technical requirements. Ideate and execute on projects to improve the technicians’ experience and provide design for manufacturability feedback based on technician feedback., • Provide technical guidance to outside vendors and support supply chain development, • Update designs, manufacturing processes, and documentation to support continuous improvement, • Bachelor's degree in an engineering discipline, or related field, • Demonstrate experience in developing manufacturing processes, • Experience working in a hardware development environment, • 2+ years of demonstrated hands-on manufacturing experience, • Proficiency with CAD software and the ability to learn new tools, • Masters' degree in an engineering discipline, • 6+ years' of demonstrated hands-on manufacturing experience within aerospace or related industry working with metallics structures, • Previous experience working within a start-up, • 4+ years' of demonstrated experience with welding (laser, friction stir weld, TIG, etc.), • Prior experience with spacecraft, aircraft, or automotive composite part design and fabrication, • Experience working on a launch vehicle or satellite development effort, • Ability to work in a fast paced, autonomously driven, and demanding atmosphere Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Guide the integration of cutting-edge manufacturing technologies into production, ensuring reliability, cost efficiency, and quality. This role shapes the future of Divergent's manufacturing by enabling new processes, supporting high-mix hardware, and mentoring engineers to deliver industry-leading results. The Role • Lead a multi-disciplinary team of manufacturing engineers responsible for driving design-for-manufacturing, process development, and implementation of advanced manufacturing methods across the DAPS manufacturing architecture., • Oversee manufacturing requirements, process specifications, and root cause investigations to ensure reliable, high-quality production., • Set team priorities, track projects, and mentor engineers to achieve critical company milestones., • Develop industry-leading approaches to manufacturing process qualification, production scalability, and automation., • Implement advanced manufacturing strategies in areas such as machining, additive manufacturing, assembly, bonding, coatings, and joining., • Identify and deploy novel manufacturing technologies to improve quality, reduce cost, and increase throughput., • Collaborate closely with design, materials, quality, and production teams to influence hardware design and production readiness. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in mechanical engineering, manufacturing engineering, or a related discipline., • 3+ years of experience in a leadership role within manufacturing engineering., • 8+ years of experience in manufacturing engineering role, with significant exposure to aerospace or defense industries., • Proficiency in CAD software (e.g., Siemens NX, AutoCAD) and strong understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Experience with Manufacturing Execution Systems (MES), Product Lifecycle Management (PLM), and Enterprise Resource Planning (ERP) systems., • Hands-on experience with advanced manufacturing techniques, including additive manufacturing, robotics, and automation., • Proven track record of leading complex projects from concept through production, focusing on high-performance materials and high-reliability applications.Preferred Qualifications, • Master's degree in a relevant engineering discipline., • Lean Six Sigma certification or equivalent expertise in continuous improvement methodologies., • Familiarity with quality management systems like AS9100 or ISO 9001., • Demonstrated ability to thrive in a high-tech, fast-paced startup environment with a passion for disrupting traditional manufacturing paradigms. Compensation • Senior Manager / M07: $165,800 - $227,950 Pay Range$142,900—$227,950 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Electronics System Engineer General Profile This Electronics System Engineer will be responsible for the electrical and firmware/software design of military simulation display product sub-assemblies. Will produce engineering designs and modifications by analyzing project requirements; researching and developing electro-mechanical engineering techniques and approaches; validating and verifying designs; supporting project implementation. Duties and Responsibilities · Determine System architectures, bus typologies, electrical and firmware/software design requirements, from Initial Design specs and Marketing needs. • Determine electrical design requirements, objectives, and priorities, using input from customers and evaluating similar and related products. · Perform actual design and coding activities to implement approved system design projects. • Plan projects by analyzing customer requirements, establishing solution implementation and conferring and collaborating with other members of the engineering group., • Organize design projects by identifying short-term and long-term requirements., • Develop electro-mechanical designs by preparing diagrams, and drawings using PADS, and (SolidWorks is a strong plus) collaborating with related design teams; evaluating components, materials and suppliers; identifying and resolving design integration/interface and manufacturability issues; determining and establishing design specifications., • Help building and testing prototypes; creating Acceptance Test Procedures (ATP); conducting, isolating and resolving performance problems., • Maintain design team accomplishments by coordinating activities; obtaining expert input; reviewing open issues and action items; contributing informational and electro-mechanical analysis to team meetings and reports; guiding technicians. Creating reports for management on the progress of the projects they are responsible for., • Provide sustaining support by offering technical support; troubleshooting and resolving production problems related to electro-mechanical design. Skills and Qualifications • Requires a B.S. degree in Electronic Engineering inclusive of the development of firmware and software, with direct applicable experience in the design of displays, microcontroller, and video circuits. · 5 to 7 years minimum experience. · Real Software / Firmware application design experience · Strong background with system level electro-mechanical design. · Real hands-on problem-solving skills. · Experience in a fast track (fast paced, fast to market) design to production environment. · Competent in the use of Bus and protocols · Familiar with Mil Standards and applicable Norms and Regulations · Must be a U.S. Citizen. NO Exceptions. Company DescriptionSimulator Product Solutions LLC is part of the Electronics Group of Orbit International Corp. We custom design and build instruments, panels, and multi-function displays for simulator use for the US and friendly militaries around the world as well as prime contractors and commercial aerospace companies.Simulator Product Solutions LLC is part of the Electronics Group of Orbit International Corp. We custom design and build instruments, panels, and multi-function displays for simulator use for the US and friendly militaries around the world as well as prime contractors and commercial aerospace companies.

Job Description Become a Sales Designer for Closets by Design! Are you a people person? Do you love helping people get organized? Does your closet look like one of our ads? Do you like to organize your friends and family for fun? If you answered YES! ...then this job is for you! We offer the following: • Work close to home, • No Cold Calling, • Monthly Bonus opportunity, • Paid training, • A flexible schedule - Variable hours, • Pre-Set appointments with new and repeat clients, • Excellent marketing materials provided, • Great people skills, • Fun and outgoing personalities Closets by Design has become the leading company in the home organizing industry over the past 35 years. Our Designers create the beautiful spaces you’ve seen in magazines and television. So, if you are a motivated individual who loves organization, being creative and working with people, Apply Now! Call Sofia Phone: 562-551-4602 OR Email us at: Average Compensation is $3k to $5k per month Company DescriptionSince 1982, we've built a reputation of integrity as the industry leader in customer service and total customer satisfaction. From our no obligation in-home consultation, custom tailored designs and the highest quality product construction, our products simply offer the best value in the industry!Since 1982, we've built a reputation of integrity as the industry leader in customer service and total customer satisfaction. From our no obligation in-home consultation, custom tailored designs and the highest quality product construction, our products simply offer the best value in the industry!

Job Description Flight Software Engineer Location: Hawthorne, CA (near LAX) Relocation: Available Team Size: ~20 engineers Compensation: $90,000–$205,000 + equity (based on performance, level, and location) About the Mission Imagine a world where solar power doesn’t shut off at sunset. We are building a constellation of autonomous spacecraft designed to reflect sunlight back to Earth after dark—unlocking nighttime solar energy for the first time in history. This is not theoretical. We are launching our first spacecraft in 2026, backed by top‑tier investors and led by engineers who have built and flown real hardware in orbit. If you want to write software that will operate a fleet of autonomous spacecraft in low‑Earth orbit, this is that opportunity. What You’ll Build As a Flight Software Engineer, you will design and deploy the software that powers every spacecraft in our constellation. Your work will span: • Autonomous decision‑making and onboard control, • Real‑time embedded C/C++ on ARM microcontrollers, • Embedded Linux systems for mission‑critical operations, • Guidance, navigation, and control (GNC), • Command and data handling, • Fault detection, isolation, and recovery, • Over‑the‑air updates to on‑orbit vehicles, • Hardware‑in‑the‑loop testing and day‑in‑the‑life simulations You will own your systems end‑to‑end—from concept and architecture to implementation, testing, and on‑orbit performance. This is a role for engineers who want to see their code fly. What You’ll Do • Develop autonomous flight software for a new class of spacecraft, • Build the infrastructure for rigorous testing and large‑scale deployment, • Implement real‑time control loops, state estimation, and system health monitoring, • Design fault‑tolerant software using watchdogs, voting logic, ECC, and FDIR, • Work directly with electrical, mechanical, and mission operations engineers, • Support on‑orbit operations and deliver OTA updates to live spacecraft, • Contribute to architecture decisions that shape the entire constellation Minimum Requirements • Demonstrated excellence on a comparable software project (autonomy, robotics, flight software, or high‑reliability embedded systems), • 3+ years of professional C/C++ experience Ideal Experience You don’t need all of these, but the strongest candidates will have several: • BS in CS, EE, ME, or Aerospace Engineering, • Flight software experience for spacecraft or similar high‑reliability systems, • ARM microcontroller development, • Embedded Linux (Yocto, Buildroot, custom kernels), • Strong debugging, unit testing, and integration testing skills, • Networking fundamentals (TCP/IP, CAN, UART, SPI, I2C), • Fault‑tolerant software design (watchdogs, voting logic, ECC, FDIR), • Exposure to MISRA‑C, JSF, DO‑178C, or similar standards, • Experience in fast‑paced, high‑ownership engineering environments Who Thrives Here We hire outliers—people who have done something exceptional, unusual, or bold. Not just “good engineers,” but people who have demonstrated intensity, creativity, and a track record of doing hard things. Examples of backgrounds that stand out: • Built a complex robotics or embedded system solo, • Led major engineering projects early in your career, • Designed custom hardware or flight computers, • Worked on spacecraft, rockets, drones, or autonomous vehicles, • Promoted rapidly due to exceptional performance, • Achieved something rare in any domain—technical or otherwise If you’ve done something that made people say, “I can’t believe you pulled that off,” we want to talk to you. Why This Role Is Different • Your code will fly on every spacecraft we launch, • You will work directly with founders and senior engineers, • You will have ownership over major subsystems, • You will see your work go from idea → hardware → orbit quickly, • You will help define a new category of space technology This is a chance to build something the world has never seen before.