Trabajos dirty en Chicago, IllinoisCrear alertas

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! • Responsible for being a key reason why friends, family, and customers of American Airlines fly safely and on time. This list is intended to reflect the current job but there may be additional essential functions (and non-essential job functions) that are not referenced. Management will modify the job or require other tasks be performed when operationally necessary, observing, of course, any legal obligations including any collective bargaining obligations. • Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the job, absent undue hardship. Please contact ___ should you wish to request an accommodation. Technical Functions • Service aircraft, including but not limited to, mechanical work involved in the dismantling, disassembly, overhauling, repairing, fabricating, assembling, welding, checking, repairing, replacing, testing, adjusting, installing, and erecting all parts of airplanes required to maintain airworthiness of aircraft and their components, • Conduct scheduled maintenance inspections, • Certify for the quality of own workmanship (i.e., that it is in accordance with the proper maintenance manuals and references), • Connect/remove ground power and ground start units, • Push out/tow aircraft and perform guideman functions AMT Work Conditions – General Functions • Perform inspections in extreme environmental conditions, including extreme heat (over 100° Fahrenheit), extreme cold (below 32° Fahrenheit), rain, sleet, wind, and snow, • Perform duties that require general safety awareness (e.g., when working in an area with moving vehicles), • Perform duties that require use of personal protective equipment (e.g., wearing fall protection while working at heights, wearing respirators while working around fumes and vapors), • Perform duties in conditions that are dirty (e.g., dirt, dust, grime), • Perform work in confined, tight, or awkward spaces AMT General Functions • Sign mechanical flight releases and/or airworthiness releases, • Maintain knowledge of and use manuals, supply/parts catalogs, minimum equipment lists, and general maintenance manuals, • Ensure forms, records, reports, and other work-related paperwork are completed properly, • Perform Foreign Object Debris (FOD) walks, • Clean work area, • Request parts American Airlines General Functions • Report to position on time, as scheduled, and at assigned station or location, including varying shifts, weekends, and holidays, • Perform all functions in accordance with safety procedures and policies, • Complete job-relevant trainings, • Adhere to government regulations (e.g., DOT, FAA, TSA), • Adhere to company policies, procedures, and performance standards, • Receive assignments and follow instructions from supervisor or Crew Chief, as applicable, • Coordinate with other employees and stakeholders in order to accomplish work tasks, • Wear uniforms as required by company policy, • High School diploma or GED, • Valid driver's license, • Ability to read, write, fluently speak and understand the English language or language native to geographical location., • Airframe and Power Plant License required., • Must be willing to work outdoors in any weather conditions in accordance with Company Safety Guidelines., • Must be willing to work extra hours when there are operational needs, such as weather delays., • Ability to work rotating shifts including weekends, holidays, and days off., • Reports to work on a regular and timely basis., • Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA)., • Must be able to secure appropriate airport authority and/or US Customs security badges., • This job is subject to the Department of Transportation (DOT) drug and alcohol testing. Your previous employers will be contacted to verify if you had any DOT drug violations and/or refusals to test for drugs or alcohol in the previous two-year period. Your DOT required urine specimen will be tested for the following substances: Cocaine, Marijuana, PCP, Amphetamines, and Opiates., • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Job DescriptionJob Title: Millwright Job Description The role of a Millwright involves both preventative and reactive maintenance tasks. This position requires proficiency in welding (MIG, STICK, and TIG) for various projects, performing lockout/tag-out procedures, fabricating parts as needed, and installing and troubleshooting machinery. Successful candidates will troubleshoot and repair conveyors, agitators, gear boxes, motors, paper recycling machines, valves, pumps, switch gears, clutches, jackshafts, rolls, and splicing equipment. Additionally, they will work with both hydraulic and pneumatic machinery and install bearings and seals on machinery, while adhering to all company and OSHA standards. Responsibilities • Conduct preventative and reactive maintenance., • Perform welding (MIG, STICK, TIG) for projects as needed., • Execute lockout/tag-out procedures when necessary., • Fabricate parts for projects and jobs as required., • Install and troubleshoot machinery., • Troubleshoot and repair conveyors, agitators, gear boxes, motors, and various machinery components., • Work with hydraulic and pneumatic machinery., • Install bearings and seals on machinery., • Comply with company and OSHA standards.Essential Skills, • 5+ years of experience as a millwright/mechanic., • Proficiency in welding, specifically MIG and STICK., • Experience working with voltage up to at least 480V., • Ownership of personal tools.Additional Skills & Qualifications, • Experience in a mill, refinery, chemical, or power plant environment.Why Work Here? This position offers great benefits and the opportunity to work within a dynamic and challenging environment. Employees enjoy a supportive team atmosphere and the potential for advancement within the company. Work Environment Candidates will work inside the mill on the manufacturing floor. The environment can be dirty and experiences temperature fluctuations, getting hot in the summer and cooling down in the winter. Initially, candidates will work day shifts from 7 am to 3 pm, with the potential to transition to a DUPONT schedule after a year. Job Type & Location This is a Permanent position based out of Alsip, Illinois. Job Type & Location This is a Permanent position based out of Alsip, IL. Pay and Benefits The pay range for this position is $60923.20 - $76960.00/yr. Benefits and Insurance are offered through Alsip Mini Mill as a full time placement. Workplace Type This is a fully onsite position in Alsip,IL. Application Deadline This position is anticipated to close on Nov 27, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

A rapidly growing solar energy firm backed by a portfolio of clean energy and sustainability-focused companies is seeking a hands-on Construction Manager to lead and optimize its solar installation operations. The organization has experienced significant expansion and now requires a seasoned professional to implement structured processes, enhance field performance, and ensure projects are delivered efficiently and to high standards of quality as they transition into larger commercial and utility-scale work. Key Responsibilities • Lead solar construction projects from planning through completion., • Work closely with foremen and field teams to organize schedules, assign tasks, and maintain progress., • Establish and implement quality control and root cause analysis processes., • Create structure and stability as project scale increases., • Support a culture of continuous learning, collaboration, and accountability., • Help build and train field teams as operations expand., • Initially be hands-on in the field, transitioning to more office-based leadership as the team grows., • Projects are primarily in the Chicago area, averaging 1 MW (up to 5 MW), with about 70% field presence and 30% office time. Ideal Background • Experience managing commercial or utility-scale solar projects. Not residential., • Strong field leadership — able to “get hands dirty” while setting standards and structure., • Knowledge of QA/QC, safety, and root cause analysis., • Self-starter who thrives in a fast-growing, less-structured environment., • Skilled at mentoring teams and implementing scalable project management systems.

Mitigation Lead Technician Chicago, IL FLSA: Non-Exempt OVERVIEW: • The Mitigation Lead Technician will lead the production department in completing water mitigation projects in a professional and timely manner. Lead Water Technicians will be available 24/7 and 365 days a year, unless they have previously scheduled time off. This position is an AT WILL SUPERVISION AND EXERCISE RECEIVED: • Receives direct or general supervision from Mitigation Project Manager ESSENTIAL FUNCTIONS: • Lead water damage projects, carpet cleaning/floor cleaning projects, and Fire and Smoke damage projects, • Extract water from flooded structures using commercial extraction equipment, • Lead job site production to include water extraction, demolition, use of hand tools, power tools, general cleanup, equipment maintenance, facility maintenance, moving of goods and supplies through warehouse production process, etc., • Assist in determining the most effective way to dry the affected materials, • Conduct demolition after fire, water/flood, mold or storm damages, • Remove carpets, carpet pads, drywall and insulation, • Submit samples of removed materials to ITEL, as required by the insurance company, • Haul debris from jobsite to truck as well as moving customer contents away from work area as needed, • Monitor moisture levels on the job site and enter data into Moisture Mapper, • Set, move and monitor humidifiers, air movers, air scrubbers and other equipment to job site, • Set up negative air in affected work areas for containment, • Efficiently and effectively installing containment, • Handle water extraction and removal of water damaged materials, • Lead staff in job performance, coaching in performance issues and input regarding evaluations, • Communicate a positive image of the company to the entire staff and customers, • Apply all safety rules and regulations and prevent work hazards, • Ability to scope water or fire loss, • Lead a team with strict deadlines, • Detect wet structural surfaces as well as affected contents, • Keep complete and accurate job files and lead the project, • Problem solving and analytically solve unexpected problems stemming from the disaster, • Brief the customer on your lead role, how the process will proceed and answer any questions, • Work in a fast but efficient work environment, • Able to travel locally, regionally and nationally for an extended period of time (hurricane), • Handle crisis management as situations occur, • Assist in problem solving and in making this a more effective organization, • Work on call and in all emergency, situations as needed, • Demonstrate general mathematical and data entry skills, • Demonstrate strong verbal and written communication skills including read and write the English language, • Generate information within a reasonable time frame with accuracy and efficiency, • Manage details of multiple projects in an efficient and organized method, • Manage professional and timely contact with clients, employees and vendors, • Produce work in a timely, budgeted, scheduled and profitable manner for the Company, • Leading the inspection process and hand tools used on water damage, • Leading production work and proficient in time management, • Specialty training in drying science, • Must be proficient in MICA, Fire & Ice and E3 app, • S500 standards & protocols for restoration, • Protocols standards for water restoration, • Upholstery cleaning skills and spotting skills, • Cooperation and respect for others. Working in a close office environment and working with others to respect ideas and opinions, • Developing and presenting creative solutions, • Laws, rules and regulations that govern the areas of your job, the restoration industry including but are not limited to your scope of work, • Industry knowledge and the ability to seek knowledge if new to the industry, • The Company ethics, image and goals and how they shall be reflected in the day-to-day job duties of you and your staff, • All policies and procedures of the Company, ability to apply and understand, • OSHA safety regulations of the industry and provide an active role in monitoring the safety of yourself and other team members, • Training and developing the skills of team members, • Timekeeping, scheduling and general pay procedures for employees EDUCATION AND EXPERIENCE: • At least 6 months of experience leading staff on projects, • High School Diploma or equivalent, • At least 2 years of restoration experience, • Carpentry and mechanical experience and skills a plus LICENSE AND SPECIAL REQUIREMENTS: • Valid State Class C Driver’s License, • WRT certification, • ASD certification, • Mold Remediation certification, • Odor Abatement certification PHYSICAL DEMANDS: • Employees will be working with cleaning, deodorization and antimicrobial products daily. Gloves, respirators and splash goggles will be used every day while working on water loss. Climbing ladders and working in high places. The workspaces can contain residue, mold, mildew, contaminated water or unsanitary conditions. Positions in this classification occasionally bend, stoop, kneel, reach, push, and pull drawers open and closed to retrieve and file information. Employees must possess the ability to lift, carry, push, and pull materials and objects, up to 75 pounds, necessary to perform job functions WORKING CONDITIONS: • Due to the nature of the work, often the job sites will be dirty, possibly cold or wet and sometimes unsanitary. Employees are required to wear protective gear as necessary and most working hours. The work is sometimes strenuous. Technicians must carefully follow safety precautions because working in damaged buildings leaves them vulnerable, particularly following natural disasters, for example. Also, disaster areas often lack resources and comfortable areas in which to rest. All attempts will be made to meet the requests of workers exposed to these conditions. Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures EQUAL OPPORTUNITY EMPLOYER/AMERICANS WITH DISABILITIES ACT COMPLIANT/DRUG FREE WORKPLACE req23-00480

Established in 1978, United Scrap Metal (“USM”) has grown from $200 and a rental truck into one of the largest full-service recyclers in the country. Today, the USM team continues to pioneer innovative, solutions-driven recycling programs through ethical and sustainable practices, which have earned them both acclaim and recognition amongst industry partners. With 600+ team members across 10 locations nationally, the company’s commitment to excellence is reflected in its award-winning history, as well as an outstanding client retention rate across thousands of customers throughout North America. Equally as important is the expansion of the team’s focus on philanthropy, sustainability, diversity and carrying out our corporate mission: making a positive impact on the lives of others. USM is proud to make a difference for its customers, partners, team members, communities and the planet as it continues to drive its expansion forward for the next forty years and beyond. USM is looking for purpose-driven individuals who seek to utilize their unique traits and attributes to make a positive impact on the company and further our mission. Team members at United are driven to achieve results and are tenacious in the face of challenges. They are humble and intellectually curious, seeking the ability to roll up their sleeves and “get their hands dirty” to solve complex problems while maintaining the motivation to develop both personally and professionally. Lastly, collaboration is vital to our business and line of work; therefore, our team members must be able to communicate and build relationships with multiple cross functional departments across the organization. Facility Administrator • Provide administrative support to a team of facility and project managers, assisting with a range of tasks related to building maintenance and project coordination. This role includes managing schedules, organizing documentation, developing, and streamlining processes, and ensuring overall administrative efficiency. Responsibilities also include maintaining compliance with company policies and procedures. Key Responsibilities: • Clerical and Organizational Tasks: This includes tasks like filing, data entry, typing, copying, and scanning documents., • Provide support to Facility and Project Managers: Assisting other Team Members with various administrative needs and preparing requests for quotes., • Project Coordination: Tracking deadlines, facilitating communication, and assisting with project related tasks. Submit reports and prepare presentations as needed., • Develop Process to Maintain Records: Create and update databases and records for facility and project management, and other data., • Scheduling and Coordination: Managing calendars, scheduling appointments, and coordinating meetings., • Communication: Answering phones periodically, if needed, responding to emails, and preparing correspondence. Required Skills: • Organizational Skills: Maintain records, manage schedules, and keep administrative needs, maintenance records and logs organized., • Communication Skills: Effectively communicates with team members, vendors, and other stakeholders. Excellent written and verbal communication., • Time Management: Prioritize tasks and meeting deadlines., • Computer Proficiency: High level competency with Microsoft Office and other relevant programs. Demonstrated solid proficiency in Microsoft Excel, including building and maintaining workbooks, developing spreadsheets and creating custom formulas., • Critical Thinking Skills: Identifies and resolves issues efficiently., • Adaptability: Able to manage a variety of tasks and situations. Change agility to learn new software programs to place purchase orders and navigate billing. Must be comfortable in a fast paced environment., • People Skills: Build rapport with Team Members, vendors and other stakeholders., • Detail Orientation: Ensuring accuracy and thoroughness in all tasks. Work Schedule: Full-time, Monday through Friday Physical Requirements The role may require the ability to walk distances within the various campus buildings or between departments without physical limitations, as the Facility Administrator may need to deliver documents, attend meetings, or access equipment. Must be able to lift and carry items weighing up to 20 pounds, such as office supplies, files, or packages, as part of regular job duties. Disclaimer The duties and responsibilities outlined above are representative but not exhaustive. Additional tasks may be assigned as necessary to support departmental and organizational objectives. We strive to demonstrate our Core Values in all positions at USM: Trust ● Commitment ● Loyalty ● Passion ● Performance ● Service ● Performance USM is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. USM will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable law. USM is a Zero Impairment Workplace. USM provides reasonable accommodation to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify your Talent Acquisition contact or another member of our People Experience Team at . The decision on granting reasonable accommodation will be made on a case-by-case basis.

Senior Product Manager- Fasteners James Hardie Building Products Location: Chicago, IL James Hardie is the industry leader in exterior home and outdoor living solutions, with a portfolio that includes fiber cement, fiber gypsum, composite and PVC decking and railing products. Our family of trusted brands includes Hardie®, TimberTech®, AZEK® Exteriors, Versatex®, fermacell®, and StruXure®. This position is based at our offices in Chicago’s West Fulton Market District. Relocation support is available. The expectation is that this position would be primarily in-office or at our other business locations at least 4 days per week with flexibility to work from home or remotely on occasion. Position will require moderate travel (25-35%). An employee shuttle to and from Ogilvy Transportation and Union Station is provided, as well as subsidized parking in our buildings attached garage. The Product Management Team for the Deck & Accessories category has responsibility for the overall lifecycle, sales and financial performance of these products.These include the full line of Deck, Porch, Accessories and Adjacencies (e.g. decking substructure). Position Summary: Reporting to the Sr. Director of Product Management for the Deck & Accessories, this role will have direct responsibility for all of our fastener products within the decking product category as well as certain fasteners for the Exteriors category (e.g. AZEK Trim). These products include primarily mechanical fasteners (screws, clamps/clips, etc.) made of metal or plastic composites, as well as the tools or systems used for installing these fasteners. The Senior Product Manager is responsible for the creation of a product roadmap, market/competitive research and analysis, new product development and testing, technical support, supplier management (co-owned with our Sourcing Team), pricing/profitability analysis and product rationalization. The Product Manager is ultimately the subject matter expert for their category and responsible for the financial results of the product line and must ensure that the product line is meeting the goals of the company. The Product Management team members are also advocates for our customers and continually find ways to add value to all stakeholders responsible for the manufacturing, marketing, distribution, sales and installation of the product. AZEK does not directly manufacture any of the fasteners that we sell today. However, we do play a direct, leading role in the product development process from concept, product definition, design/engineering, development and testing. Therefore, this position works primarily with key supplier-partners, outside engineering/design resources and AZEK’s Legal (IP), Sourcing and R&D/Applications organizations to drive the development and testing of these products. The Product Manager also works cross-functionally to successfully launch new products to the market and manages the complete life-cycle of existing products. The ideal candidate will be passionate about helping to drive sales growth and gross margin improvement of our products. This candidate should be highly organized, able to manage multiple projects and priorities simultaneously, focus on the technical and other details and drive cross-functional execution for the category while also understanding and engaging at the strategic level as well. Finally, the candidate will also display a strong commitment to our Core Values. ESSENTIAL FUNCTIONS: • Work with the Product Management, Sales, Sourcing and overall business leadership teams to develop a successful product and business strategy for the assigned products, including a multi-generational product roadmap., • Lead the execution of that strategy for the Fasteners product category. This includes engaging cross-functionally across all aspects of product development and on-going product management (product development, manufacturing, logistics, quality, code compliance, applications testing, marketing, sales, customer service, demand forecasting, reporting and analysis, margin improvement, pricing and promotions, including event support)., • Engage with and effectively lead/manage outside engineering, product design, development, testing and other technical service providers and suppliers as applicable. Conduct regular business and project reviews with suppliers., • Conduct regular and ad-hoc analysis of product line performance (sales trends, regional and geographic customer analysis, revenue, margin and other basic financial and performance metrics). Conduct monthly business reviews using that information and analysis combined with on-going market and competitive analysis., • Become the subject matter expert within the product category for the business and provide input and support to the Sourcing, Sales, Marketing, Customer Service and SIOP/Supply Chain teams., • Conduct regular product data audits/maintenance, product costing and pricing support., • Help to develop (and occasionally deliver) training programs to be used to educate the sales team, distributors, dealers and contractors on the features, benefits and applications of our products., • Partner with the Product Marketing team to update all sales, marketing and technical collateral including product literature, sample materials, displays, sales presentations and collateral, product databases, installation guides and installation videos, technical data sheets and AIA presentations., • Work with our Technical Services and Installation/Applications teams to develop and conduct product qualification testing, installation and other field tests and of new and existing products., • Identify and evaluate new and emerging fastener technologies to determine potential product, strategic and business fit. Position Qualifications: • Team/Cultural Fit: Self-motivated, hard-working, intellectually curious, willing and happy to roll-up your sleeves and get your hands dirty, driven to succeed individually but also as a team (e.g. help yourself and help others), ability to figure out how to get things done without “ownership” of resources or organizational power.Ability to make and hit commitments and deadlines. Responsive to changing business priorities or short-term business needs without losing focus on what’s most important for the long term., • Education: Bachelor’s Degree in product design, mechanical engineering or a related field; MBA desired.Equivalent work experience, aptitude and a strong track record of success in technical and product development roles would also be considered in lieu of a technical degree., • Skills: Strong project management skills, cross-functional coordination and communication, financial/analytical acumen, customer orientation, strategic and execution mindset. Strong computer skills to include: Word, Excel, PowerPoint and ad-hoc reporting tools. Technical engineering and design software skills strongly preferred (e.g. Solidworks)., • Experience: 7+ years in Product Design, Engineering, Product Management or demonstrated experience over a longer time frame and across other business functions that are directly related to the core responsibilities of the position (e.g. Project management, operations, marketing). Direct experience with management of tangible products such as building materials is a plus. Experience with ERP software tools is a plus. Compensation for roles at James Hardie varies depending on a wide range of factors including but not limited to the specific office location, role, skill set and level of experience. The annual salary for this role is $140,000 to $150,000. In addition to base salary, we offer generous bonus and incentive opportunities that significantly increase earning potential. The AZEK Company was acquired by James Hardie. James Hardie is the industry leader in exterior home and outdoor living solutions, with brands including Hardie®, TimberTech®, AZEK® Exteriors, Versatex®, fermacell®, and StruXure®. With 8,000+ employees worldwide, we’re united by our purpose of Building a Better Future for All™ through sustainable innovation, a Zero Harm culture, and a commitment to empowering our people and communities. For more information, visit . Following The AZEK Company’s acquisition by James Hardie, we remain committed to providing fair and equitable employment experience for all candidates. Join us in shaping the future of our business!

Title: Field Environmental Waste Specialist Starting Pay: Up to 85k depending on experience Location: Chicago, IL Direct Hire Qualifications: • 2+ years of environmental waste experience, • Great communication and be able to work directly with clients, • Willing to get their hands dirty and work hard Managers Notes: • This person is going to be a "Rover" someone who can travel to any location in the Midwest, fill in for ES that are out on PTO, assist in large projects, basically be where ever they are needed, • Will travel 1-3 days a week, • Provide training where needed, • Willing to be hands on, • THIS POSITION LEADS TO A REGIONAL MANAGER OP. Benefits: • Health, Dental and vision insurance, • 401/k with contribution, • Tuition Reimbursement, • Health & Wellness including on location gyms, • Training & Advancement Opportunities, • PTO and Holidays, • Mentorship and career planning, • Auto/home insurance discounts Our client is seeking an Operations Coordinator to join their Midwest team. The ideal candidate is detail-oriented, organized and thrives on problem-solving, building strong cross-team relationships, and mentoring others to meet high performance standards. This role requires someone who can balance structure with flexibility, an analytical thinker who ensures compliance while driving cost savings and operational excellence. They provide leading organizations in the higher education, life sciences, healthcare, and advanced manufacturing sectors with diverse services and expertise to assist them with compliance management. Responsibilities: Project Scoping & Management • Scope and manage new jobs (field service, lab pack), • Develop detailed project breakdowns for inside operations, • Collaborate with AMs, TSRs, and GMs to prepare proposals, • Conduct pre-job meetings with crews and oversee productive job flow, • Review job folders, paperwork, and lab packs for quality control, • Regional Travel throughout the Midwest as necessary – between 0-4 days per week with overnights as required., • Kicking off new OSS accounts, • Assisting and Training on large scale lab services projects (moves, packs, etc.), • Taking over non-Platinum Account OSS site visit program, • Provide coverage for PTO and other site backup required for OSS programs, • Assist with helping and training new ES, • Work on Yearlong onboarding training program, • Assess ES training needs and conduct technical, practical, and safety trainings, • Coach employees to balance safe work practices with efficiency, • Mentor and develop chemists; grade and review chemist tests, • Monitor team advancement and maintain group core competencies, • Conduct timesheet approvals, semi-annual reviews, and supervise direct reports, • Partner with OSS Coordinator and lead ES/TSRs to reduce costs and improve efficiencies, • Monitor costable/billable hours and onsite efficiencies, • Ensure compliance with transportation safety, including ES driver log reviews, • Lead morning duty program for the IL office, • Oversee lab pack inventory, scoping, and QC, • Conduct and review practical lab packing trainings, • Manage field service projects, including subcontractor relations and contracts, • Build and manage book of business; prospect for new opportunities, • Review client agreements (ER and FS rates), • Participate in Green Ribbon initiatives, • 18 months+ of relevant experience, • BS/BA in environmental science, Chemistry, Biology, or Business preferred, but all majors are welcome to apply., • Must be able to submit college transcript, • Successful completion of OSHA/DOT physical examination, • Valid driver’s license #LI-JB1

Job Description Honey Bee Cleaning Service is a boutique cleaning service company servicing the Chicagoland area. We clean common areas of apartment buildings, apartments, short term rentals, houses and occasionally events. As a growing company we thrive on commitment and opportunities to grow. Learn the importance of property maintenance and how to possibly grow a company opening up a branch of your own. Cleaner Job Responsibilities: * Responsible for all basic cleaning in and around residences, office buildings or large residential buildings. * Cleans floors and rooms: including dust mopping, damp mopping, sweeping, vacuuming, dusting, picking up larger objects off the floor, cleaning baseboards and spot cleaning glass and windows. * Cleans restrooms, including restocking (upon request), emptying trash, cleaning and sanitizing fixtures, cleaning mirrors, spot cleaning partition doors and walls, sweeping and mopping tile floors, and cleaning toilets and urinals. * Vacuums, empties trash, and replaces liners. * Sets up, stocks, and maintains cleaning equipment and supplies. * Post construction cleaning. * Sometimes required to move furniture. * Assist in haul away and/or property clean outs. * Comfortable cleaning outside with picking up trash, raking/blowing leaves, cleaning around dumpsters, occasionally handling garbage. * Monitors and maintains sanitation and organization of assigned areas. * Transports dirty linens to the correct area to be cleaned and restocks areas with clean linens. * Must be ok with handling hazardous waste and performing deep cleanings. * Assists other departments when needed to ensure optimum service to guests. * Performs additional duties as needed. Work Hours & Benefits: This position is Part-Time. Hours Varies. Additional work may be picked up. After 60 days a gas stipend is available. Cleaner Qualifications / Skills: * Positive attitude * Strong Attention to detail * Excellent communication and organizational skills * Strong interpersonal and problem-solving abilities * Highly responsible & reliable * Ability to work cohesively as part of a team * Timeliness * Cleanliness Additional Qualifications: * Phone with strong cellular data for clocking in/out and uploading before and after photos/videos. * Reliable transportation with adequate space to carry cleaning supplies. Education, Experience, and Licensing Requirements: * High school diploma, GED, or equivalent * Previous cleaning experience a plus * Valid driver’s license To become apart of our awesome team, click the apply button now! Company DescriptionHoney Bee Cleaning Service is a boutique cleaning service company servicing the Chicagoland area. We are a property manager's best friend. We maintain their interior of their buildings, the grounds and assist with unit cleanings. As a growing company we thrive on commitment and opportunities to grow. Learn the importance of property maintenance and how to grow a company to take on bigger projects.Honey Bee Cleaning Service is a boutique cleaning service company servicing the Chicagoland area. We are a property manager's best friend. We maintain their interior of their buildings, the grounds and assist with unit cleanings. As a growing company we thrive on commitment and opportunities to grow. Learn the importance of property maintenance and how to grow a company to take on bigger projects.

Community: GreenFields of Geneva Address: 0N801 Friendship WayGeneva, Illinois 60134 Pay Range $15.16-$20.85+ Hourly Live your purpose. Grow your career. Thrive through teamwork. Create meaningful, personalized experiences. At Lifespace, team members are at the center of delivering a purpose driven experience for our residents! We provide an environment where each team member can live their aspirations, developing in their career, making a difference, and being a part of a meaningful mission. Join our outstanding team as our new Nursing Assistant today! A few details about the role: • Provides supportive services to certified nursing assistants and other staff as needed and performs duties as assigned., • Assists resident with meal delivery, delivers meal and fluids to resident., • Ensures dining room is clean and ready for mealtimes such as set-up and clean-up of plates, utensils, napkins, and ensuring dining areas are clean after meals., • Completes housekeeping duties in resident rooms while CNA’s are providing care., • Cleans dentures., • Makes list of residents whose fingernails and toenails need trimming., • Checks every call light for proper working order and document if any issues are seen as directed by a supervisor. Notify supervisor of issues immediately., • Checks privacy curtains for cleanliness. Retrieve clean privacy curtain from laundry as needed and change., • Assists with resident visitors as instructed., • Assists resident with accessing electronic devices including tablet/iPad, phone, computer usage, internet, tv, etc., • Takes dirty linen, trash and soiled clothing barrels to the laundry as needed. Retrieves clean linen, trash, and clothing barrels for the assigned unit to maintain par levels., • Cleans medical equipment not in use, cleans soiled and clean utility rooms on assigned unit., • Provides companion services as assigned such as but not limited to reading, table games, cards or other activity as requested by the resident., • Assists with transporting resident to activities once the resident has been safely transferred into a wheelchair by certified staff., • Delivers mail to residents as assigned., • Posts activity calendars in resident rooms as assigned., • Reports changes in a resident’s condition to the resident’s nurse and supervisor. And here’s what you need to apply: • High school diploma or equivalent preferred, • Minimum of one year of experience preferred Lifespace has enjoyed over 40 years of success, and this is just the beginning. With new opportunities, continued growth, and the support from your Lifespace family get ready to ignite your life and experience Living Lifespace. COMPANY OVERVIEW: Lifespace Communities headquartered in West Des Moines, Iowa and Dallas, Texas, is one of the nation's largest Senior Living providers of non-profit retirement communities. Lifespace employs over 4,500 team members and servers over 5,100 residents. The organization is committed to creating communities where people are empowered to live their aspirations. Equal Opportunity Employer If you are excited to learn and grow, be excellent, thrive with your team and deliver personalized experiences you'll enjoy your career with us!

Job Description We are expanding and looking to add a maintenance electrician to our team! Pre-employment requirements • Authorized to work in the United States., • Inspect electrical equipment, wiring, fixtures, and other components to ensure they remain functional and are up to code, as well as to identify any hazards or issues., • Determine the reasons for any malfunctions of systems or components and create a maintenance or repair plan to solve the problem., • Repair electrical systems, wiring, circuit breakers, equipment, and other components so that they remain fully functional in a production environment., • Test systems with devices such as voltmeters, mergers, and ohmmeters to ensure the system remains safe and that components are compatible., • Review blueprints to understand the wiring to troubleshoot component problems, • Provide suggestions on the lifespan of equipment and other electrical components, advising when certain components should be replaced due to potential risks., • Keep records of all maintenance and repair work conducted, including a record of any supplies ordered and used., • Ensure all routine maintenance work is handled on a regular schedule to reduce the risk of larger and more complex issues and to reduce costs., • Three-phase and single-phase experience required 120/240/480 volt, • Ability to troubleshoot complex circuits, • Experience installing Rigid and EMT conduit up to 2”, • Lockout Tag out and Electrical Safety Experience You will get dirty as it is a heavy industrial facility. • 2 or 4-year degree in EE or EET or 3-5+ years equivalent experience, • PLC experience – preferably Allen Bradly, some Siemens a plus – min 1 year, • 480V 3-Phase power experience preferably in manufacturing, • Mechanical and electrical troubleshooting experience, • Ability to read electrical schematics., • NFPA 70 (NEC) & 70E (electrical safety) familiarity, • Industrial manufacturing experience a plus, • Arc flash training a plus, • Previous experience in electrical engineering or other related fields, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • PLC Troubleshooting Skills, • Electrical Schematics, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Hydraulics Experience, • PLC Programming Experience, • PLC Wiring Experience, • Machine Safety Inspections, • Meets Physical Requirements, • Basic Computer Skills, • Programmable Logic Controller (PLC)

Job Description Position Overview: The General Labor individual manually sorts material to achieve company goals under the direction of the supervisor. Reporting Structure: Reports to the supervisor. Primary Objectives: The General Laborer works under the direction of the supervisor and is expected to follow instructions to complete various tasks. Basic duties include sorting and segregating material. Minimum Training Requirements • Basic on-the-job training that satisfies the Primary Objectives of the specific position (as noted above), • ISO / RIOS & QEHS Overview, • Housekeeping & Slips, Trips and Falls, • Electrical Safety, • Personal Protective Equipment, • Hearing Conservation, • Lockout Tagout, • Hazard Communication, GHS & Eyewash Locations, • First Aid, Bloodborne Pathogens, CPR & AED, • Confined Space, • Pedestrian, Forklift & Heavy Equipment Safety, • Safe Lifting & Back Injury Prevention, • Tool Safety, • Fire Prevention, Extinguishers & Torch Safety, • Emergency and Evacuation Plans, • Incident Reporting, • Working In the Heat / Cold, • Zero Tolerance / Reasonable Suspicion, • Significant Aspects and Impacts, • Operates with integrity while upholding ethical standards of the organization, • Facilitates internal communication with his Supervisor and peers, • Views, grades and sorts material, • Facilitates a safe and clean work environment, • Ability to work quickly and efficiently to meet department and company goals while adhering to all company, safety and health policies, • Ability to work in various environmental conditions such as extreme heat or cold, dusty, dirty and/or wet conditions, • Demonstrate understanding of company policies, rules and trainings, • Must demonstrate competency in all aspects of the job, company objectives and policies, • Must possess basic reading and writing comprehension in English, • Must have the ability to perform the physical tasks of the job such as frequent bending, standing, lifting (50-75 lbs), • Able to fulfill flexible scheduling requirements as determined by the manager and / or business needs of the operation

Job Description$35.00 to $45.00/hour Job Summary We're seeking a hands-on Technical Support Engineer to keep our innovative in-store technology projects running smoothly. This role focuses on the technical execution and field support of retail technology deployments, particularly LED video wall installations and complex device configurations for major retailers. You'll own the full lifecycle of technical tasks—from configuring computers and setting up displays to validate field issues, testing new content, and providing rapid-response field support when issues arise. Outform's technology team works across diverse hardware and software solutions in retail environments. You won't be expected to know everything, but you must have a genuine interest in technology and the drive to dive in, troubleshooting, and figure out things. If you enjoy solving problems under pressure and take pride in keeping deployments moving forward, this is your role. Responsibilities • Hands-On Technical Configuration & Setup:, • Configure computers, set up LED displays, and prepare devices for deployment across multiple unique projects, • Install, test, and validate new content, firmware updates, and configurations across diverse display types and platforms, • Perform quality assurance testing and validation to ensure all systems function correctly before and after deployment, • Troubleshoot technical issues, apply software testing methodologies to hardware/device problems, and document solutions for future reference, • Field Support & Problem Resolution:, • Diagnosing and resolving field issues that arise post-deployment, leveraging specialized knowledge to prevent multi-day, multi-visit problems, • Travel to client sites and retail locations at short notice to address critical technical issues when your expertise is essential, • Work collaboratively with internal teams to understand field problems and implement lasting solutions, • Serve as a key resource for technical troubleshooting and issue escalation, • Technical Documentation & Process Support:, • Maintain accurate technical documentation including wiring diagrams, configurations, and setup procedures, • Create and update installation documentation to be done both by warehouse install teams and 3PL installation at the stores, • Create and update troubleshooting guides and technical reference materials for support teams, • Test and validate technical solutions across different project scenarios and requirements, • Collaborate with developers in Miami and teams in Union City and Chicago to align technical approaches, • Cross-Project Technical Versatility:, • Support diverse projects with unique technical requirements, adapting skills and approaches as needed, • Work with various hardware, software, and content platforms to develop broad technical capabilities, • Evaluate technical feasibility and identify solutions for project challenges, • Technical Aptitude: General understanding of technological fundamentals with strong troubleshooting and debugging capabilities, • Hands-On Experience: Comfortable working directly with hardware, devices, and technical systems; willingness to get hands dirty, • Problem-Solving: Exceptional ability to diagnose issues, test hypotheses, and implement solutions independently, • Learning Agility: Ability to quickly expand technical skills across diverse hardware/software domains and project types, • Flexibility & Responsiveness: Can adapt to changing priorities, work across multiple projects, and travel on short notice when needed, • Communication: Clear communication of technical issues and solutions to both technical and non-technical team members, • Position is based out of our Chicago, IL office., • Team is spread out geographically across multiple time zones. Must be able to participate in weekly calls with technical and production teams in China., • Ability to travel is essential. 30% travel to client offices, Outform offices (Union City, CA and Miami, FL), and client retail locations. International travel (China production facilities) also possible.

Job DescriptionAbout The Role: Zeno Group is seeking a Director of Analytics to join our team. At Zeno, we harness the power of data and storytelling to deliver Performance Communications solutions for our clients. As a key team member on the data & analytics team, you will develop and market these services across a portfolio of clients ranging from corporate to consumer as well as healthcare. The main function of an individual in this role is to help drive the team forward. She/he will be actively managing multiple projects/programs across several clients and needs to think both strategically as well as be willing to get their hands dirty with the more tactical nature of the business. Leveraging advanced analytics and emerging AI tools, this individual will uncover insights that inform strategy, optimize performance and drive measurable impact. She/he will oversee client deliverables, manage budgets, and create estimates as incremental work is solidified. The individual should have managerial experience and should be a proven leader with relevant analytics experience. Responsibilities: • Oversee data & analytics initiatives, ensuring quality work, deadline and budget adherence., • Capitalize on your expertise to provide innovative measurement solutions to uncover key business insights and actionable optimizations across all marketing initiatives. (i.e., paid, earned and owned)., • Evaluate the feasibility of complex programs and help chart the course to success based on irrefutable data and evidence., • Help mentor, manage and work side-by-side with junior team members., • Demonstrate passion and commitment to elevate and expand data and analytics capabilities by inspiring and educating key internal and external stakeholders., • Positive attitude and proven ability to work with others across the agency through challenging work assignments providing ongoing support as well as managing quick turn asks for high-expectation clients., • Promote cross-functional collaboration as a strong and active partner across teams (i.e., strategy, creative, buying, account), using data driven insights to provide strategic, creative and tactical client business solutions., • Liaise with different stakeholders, develop solutions that are additive and push work across paid media with a keen eye for best-in-class communications., • Articulate a clear point of view regarding performance media solutions, breaking down complex concepts into services and outcomes that drive results for clients.Qualifications:, • At least 6-7 years of hands-on data management and data analytic experience in a client-facing paid media or marketing role., • At least 2-3 years of experience managing people and/or teams., • Solid understanding of programming foundations and ability to understand data structures., • Strong understanding of marketing initiatives and the various metrics that are associated with them, with a particular focus in earned, digital and social metrics., • Comfort with ambiguity, variability, and change in business requirements., • Possess the skills to generate multiple effective solutions that address specific data and analytic needs., • Be able to build presentation materials and present in an articulate and easy-to-understand fashion to director, VP, and C-suite level clients with a clear storyline that addresses client business needs., • Needs to be comfortable in generating multiple solutions to data analysis and data display challenges., • Ability to conceptualize and perform data analysis and have experience generating custom reports; knowledge of Excel required., • Must be able to manage multiple projects independently and prioritize tasks., • Detail oriented with the ability to pay close attention to accuracy of personal work and work of others., • Must possess skills to create data visualizations using Tableau, Google Data Studio., • Must have excellent verbal communication and writing skills and be able to clearly, effectively and appropriately for the intended purpose and audience., • Experience with digital or PR tools a plus, such as: Google Analytics (GA4), Facebook Ads Manager, TikTok, Instagram, Sprout Social, Onclusive, Talkwalker, Cision, Meltwater, Profound, Muck Rack, Tableau Prep, Alteryx, FiveTran, etc.Additional Qualifications:, • Experience with Generative Engine Optimization (GEO) or SEO background / experience.

Job Description Established in 1978, United Scrap Metal (“USM”) has grown from $200 and a rental truck into one of the largest full-service recyclers in the country. Today, the USM team continues to pioneer innovative, solutions-driven recycling programs through ethical and sustainable practices, which have earned them both acclaim and recognition amongst industry partners. With 600+ team members across 10 locations nationally, the company’s commitment to excellence is reflected in its award-winning history, as well as an outstanding client retention rate across thousands of customers throughout North America. Equally as important is the expansion of the team’s focus on philanthropy, sustainability, diversity and carrying out our corporate mission: Making a positive impact in the lives of others. USM is proud to make a difference for its customers, partners, team members, communities and the planet as it continues to drive its expansion forward for the next forty years and beyond. USM is looking for purpose-driven individuals who seek to utilize their unique traits and attributes to make a positive impact on the company and further our mission. Team members at United are driven to achieve results and are tenacious in the face of challenges. They are humble and intellectually curious, seeking the ability to roll up their sleeves and “get their hands dirty” to solve complex problems while maintaining the motivation to develop both personally and professionally. Lastly, collaboration is vital to our business and line of work; therefore, our team members must be able to communicate and build relationships with multiple cross functional departments across the organization. Position Overview The People Experience Talent Acquisition Coordinator’s main function is to source candidates and manage the recruiting process. This individual works closely with various team members to manage people related issues in an appropriate manner. Reports to the COO and works closely with the members of People Experience, as well as the leadership team. Summary of Responsibilities • Sources candidates, • Coordinates entire interview process: requisition to hire, • Reviews prospective candidate applications, • Performs initial phone screening of candidates, • Coordinates candidate interviews with hiring managers, • Coordinates all pre-start date activities:, • Initial hire / rate form, • Clinic, background, MVR, PSP, non-compete and job description info to candidate, • Offer letter and initial approval documents (such as rate form), • Executes job postings, career fairs, external recruiter partnerships and internal referral program, • Interfaces with online recruiting sites and internally tracks candidate pipelines and metrics, • Manages temp to perm candidate tracking and notification, • Bachelor’s Degree or equivalent experience required, • Proven track record of 3-5 years of multifaceted experience in Human Resources or Organizational Development, • Ability to identify, scope and manage projects, tasks and risks, • Broad people perspective across all areas of people strategy, including recruiting, training, performance and culture, • Ability to focus on both the “what” and the “how” things get done inside the organization, • Excellent communication skills, written expression and comprehension, • Quality approach to work, with an appreciation for procedures & controls, • High degree of personal accountability and problem-solving skills, • Ability to thrive in challenging situations or while under stress, • Strong desire to work in a challenging role that provides meaningful personal growth opportunities, • The Company desires a candidate who has shown a stable job history, dependable attendance practices and whose references can state is a trustworthy individual, • Candidate must pass a pre-employment physical, background and credit check, • Basic on-the-job training that satisfies the Primary Objectives of the specific position (as noted above), • US-SOP-01 United in Safety Manual, • US-F11 QEH&S Policy Trust ● Commitment ● Loyalty ● Passion ● Respect ● Service-● Performance USM is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. USM will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable law. USM is a Zero Impairment Workplace. USM provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify your Talent Acquisition contact or another member of our People Development Team. The decision on granting reasonable accommodation will be made on a case-by-case basis.

Job Description Senior Product Manager- Fasteners James Hardie Building Products Location: Chicago, IL James Hardie is the industry leader in exterior home and outdoor living solutions, with a portfolio that includes fiber cement, fiber gypsum, composite and PVC decking and railing products. Our family of trusted brands includes Hardie®, TimberTech®, AZEK® Exteriors, Versatex®, fermacell®, and StruXure®. This position is based at our offices in Chicago’s West Fulton Market District. The expectation is that this position would be primarily in-office or at our other business locations at least 4 days per week with flexibility to work from home or remotely on occasion. Position will require moderate travel (25-35%). An employee shuttle to and from Ogilvy Transportation and Union Station is provided, as well as subsidized parking in our buildings attached garage. The Product Management Team for the Deck & Accessories category has responsibility for the overall lifecycle, sales and financial performance of these products. These include the full line of Deck, Porch, Accessories and Adjacencies (e.g. decking substructure). Position Summary: Reporting to the Sr. Director of Product Management for the Deck & Accessories, this role will have direct responsibility for all of our fastener products within the decking product category as well as certain fasteners for the Exteriors category (e.g. AZEK Trim). These products include primarily mechanical fasteners (screws, clamps/clips, etc.) made of metal or plastic composites, as well as the tools or systems used for installing these fasteners. The Senior Product Manager is responsible for the creation of a product roadmap, market/competitive research and analysis, new product development and testing, technical support, supplier management (co-owned with our Sourcing Team), pricing/profitability analysis and product rationalization. The Product Manager is ultimately the subject matter expert for their category and responsible for the financial results of the product line and must ensure that the product line is meeting the goals of the company. The Product Management team members are also advocates for our customers and continually find ways to add value to all stakeholders responsible for the manufacturing, marketing, distribution, sales and installation of the product. AZEK does not directly manufacture any of the fasteners that we sell today. However, we do play a direct, leading role in the product development process from concept, product definition, design/engineering, development and testing. Therefore, this position works primarily with key supplier-partners, outside engineering/design resources and AZEK’s Legal (IP), Sourcing and R&D/Applications organizations to drive the development and testing of these products. The Product Manager also works cross-functionally to successfully launch new products to the market and manages the complete life-cycle of existing products. The ideal candidate will be passionate about helping to drive sales growth and gross margin improvement of our products. This candidate should be highly organized, able to manage multiple projects and priorities simultaneously, focus on the technical and other details and drive cross-functional execution for the category while also understanding and engaging at the strategic level as well. Finally, the candidate will also display a strong commitment to our Core Values. ESSENTIAL FUNCTIONS: • Work with the Product Management, Sales, Sourcing and overall business leadership teams to develop a successful product and business strategy for the assigned products, including a multi-generational product roadmap., • Lead the execution of that strategy for the Fasteners product category. This includes engaging cross-functionally across all aspects of product development and on-going product management (product development, manufacturing, logistics, quality, code compliance, applications testing, marketing, sales, customer service, demand forecasting, reporting and analysis, margin improvement, pricing and promotions, including event support)., • Engage with and effectively lead/manage outside engineering, product design, development, testing and other technical service providers and suppliers as applicable. Conduct regular business and project reviews with suppliers., • Conduct regular and ad-hoc analysis of product line performance (sales trends, regional and geographic customer analysis, revenue, margin and other basic financial and performance metrics). Conduct monthly business reviews using that information and analysis combined with on-going market and competitive analysis., • Become the subject matter expert within the product category for the business and provide input and support to the Sourcing, Sales, Marketing, Customer Service and SIOP/Supply Chain teams., • Conduct regular product data audits/maintenance, product costing and pricing support., • Help to develop (and occasionally deliver) training programs to be used to educate the sales team, distributors, dealers and contractors on the features, benefits and applications of our products., • Partner with the Product Marketing team to update all sales, marketing and technical collateral including product literature, sample materials, displays, sales presentations and collateral, product databases, installation guides and installation videos, technical data sheets and AIA presentations., • Work with our Technical Services and Installation/Applications teams to develop and conduct product qualification testing, installation and other field tests and of new and existing products., • Team/Cultural Fit: Self-motivated, hard-working, intellectually curious, willing and happy to roll-up your sleeves and get your hands dirty, driven to succeed individually but also as a team (e.g. help yourself and help others), ability to figure out how to get things done without “ownership” of resources or organizational power. Ability to make and hit commitments and deadlines. Responsive to changing business priorities or short-term business needs without losing focus on what’s most important for the long term., • Education: Bachelor’s Degree in product design, mechanical engineering or a related field; MBA desired. Equivalent work experience, aptitude and a strong track record of success in technical and product development roles would also be considered in lieu of a technical degree., • Skills: Strong project management skills, cross-functional coordination and communication, financial/analytical acumen, customer orientation, strategic and execution mindset. Strong computer skills to include: Word, Excel, PowerPoint and ad-hoc reporting tools. Technical engineering and design software skills strongly preferred (e.g. Solidworks). James Hardie is the industry leader in exterior home and outdoor living solutions, with brands including Hardie®, TimberTech®, AZEK® Exteriors, Versatex®, fermacell®, and StruXure®. With 8,000+ employees worldwide, we’re united by our purpose of Building a Better Future for All™ through sustainable innovation, a Zero Harm culture, and a commitment to empowering our people and communities. For more information, visit . Following The AZEK Company’s acquisition by James Hardie, we remain committed to providing a fair and equitable employment experience for all candidates. Join us in shaping the future of our business!

Job Description 2nd Shift Hours: 2:00pm - 10:30pm This position is considered safety sensitive and is subjective to drug testing, including cannabis SUMMARY: The CNC Cutter Grinder is responsible for performing precision grinding, sharpening, polishing, or cutting of tools (drills, reamers, end mills, etc. in HSS and solid carbide). Make or modify cutting tools to blueprints or written instruction. Modify tool holders, boring bars. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Personally exhibits, and consistent with Core Behaviors, • Responsible for promoting culture of safety, • Set up and operate all departmental equipment, to recondition standard tooling and/or make/modify special tools, • Select, dress and mount grinding wheels on machines, according to specifications, using hand tools, applying knowledge of abrasives, and grinding procedures., • Inspect, feel, and measure work pieces to ensure that surfaces and dimensions meet specifications., • Perform basic maintenance, such as cleaning and lubricating machine parts., • Monitor machine operations to determine whether adjustments are necessary; stop machines when problems occur., • Remove and replace worn or broken machine parts, using hand tools., • File or finish surfaces of work pieces, using prescribed hand tools., • Turn valves to direct flow of coolant against cutting wheels and work pieces during grinding., • Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts., • Inspect cutting tools to detect defects, assess wear, and verify specifications, using micrometers, and loupes., • Programing & adjustments of CNC Machines, • Inspect equipment, process, or materials to identify the cause of errors, problems, or defects, • Keep workspace clean and organized, • Ability to complete necessary paperwork and documentation as required. (Travelers, timesheets, inspection reports, etc.) QUALIFICATIONS: • Fully competent with reading blueprints, • Use of inspection equipment (precise measuring tools), • Follow written and verbal instruction, • Ability to troubleshoot Determining causes of operating errors and deciding what to do about it, • Repairing - Repairing machines or systems using the needed tools, • Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems, • Log in and out of set-up and operation (time management), • Ability to think creatively, make decisions, and solve problems, • Able to communicate and cooperate with supervisors and peers SUPERVISORY RESPONSIBILITIES: • No direct supervisory responsibility. EDUCATION and/or EXPERIENCE: • High school diploma or equivalent required, • Some college or trade school preferred, • 0-2 years of experience required in the field or in a related field, • 2-4 years of experience preferred, • CNC programs, manual tool/cutter grinding experience or machine operator experience preferred. CERTIFICATES, LICENSES, REGISTRATIONS: • None required WORK ENVIRONMENT: • Employee is regularly required to speak and understand English, stand, walk, sit, use hand to finger, handle or feel objects, tools, or controls; reach with hands and arms. Employees are required to use computers and other equipment., • Good working conditions. The environment may be slightly dirty or involve occasional exposure to elements listed above. Work is generally performed during traditional working hours; regular day hours Monday through Friday; although there may be some changes to the work schedule to include some weekends or evenings., • Employees frequently lift and/or move up to 50 pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: • Eye protection, ear protection, steel-toed shoes as required *BlackHawk Industrial is an Equal Opportunity Employer *BHID policy requires all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment. Executive Search Firms and Staffing Agencies: Please be advised that BlackHawk Industrial only accepts resumes from agencies with which we have an executed contract and proactively engaged with. Accordingly, BlackHawk Industrial and any of its affiliates is not obligated to pay referral fees to any agency that is not party to an agreement with BlackHawk Industrial. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of BlackHawk Industrial.

Job Description Must Have 1 year of OB Experience The OB Tech will maintain and replace unit supplies, checking for expiration dates, will prepare rooms for procedures and assist during procedures needed. He/she can function as a unit secretary, able to complete the short registration patient process in Meditech and is expected to perform tasks such as: transporting patients, entering orders, entering patient charges in the Meditech, bringing specimens to the laboratory, obtaining prenatal records, and maintaining admission packets. Department Specific Duties and Responsibilities: • Sets up scrub/procedure room with adequate supplies and equipment for personnel., • Sets up the OR and the LDR for the procedure. (if applicable), • Uses proper technique in gowning and gloving., • Drapes patients in preparation for surgery in cesarean section, tubal ligation and D&C, and any other surgical procedures needed., • Uses proper technique, scrubs to assist the surgeon during surgical procedure by providing instruments, sutures, sponges, and dressing and other required supplies and equipment., • Assists RN in counting sponges, instruments, needles, and also in applying dressings., • Maintains aseptic technique., • Assists in moving patients from operation table to cart., • Cleans the procedure rooms/ OR after and after each surgical procedure; assists in maintaining cleanliness of equipment and cabinets. Stores or disposes placentas. Rinses instruments and sprays with Pre-Klenz, dirty instruments brought to sterile processing and clean are restocked in L&D, • Cleans sinks and cabinets, disposes waste materials appropriately, • Maintains adequate supply quantities in patient rooms, checking for outdates., • Transports patients and brings specimens to the laboratory., • Able to admit patients in Meditech., • Updates monthly call lists for in-house OB, in-house Pediatricians, on call Neonatologists and surgical assistants, • Answers call lights, • Files medical records, fax medical records, and obtains medical records from other hospitals if requested. Familiar with downtime forms and procedures, • Enters doctors or CNM orders in Meditech system as verified by RN., • Completes labor and delivery charges for delivered and undelivered patients., • Helps RN in completing admission and delivery logbooks., • Assists RN during delivery., • Maintains current visiting policy., • Offers support to patient during labor., • Daily logs temperatures of warming cabinets, • High School/GED, • BLS Cert. required

Job Description:\n\nWe’re looking for a curious, rigorous, problem-hungry platform engineer (who codes!) to carry the ball as we bring Ashby to the big leagues. Ashby builds software that lets talent teams build an efficient, delightful, respectful hiring process. Similarly, you’re an engineer who wants to build a “paved road” that excellent engineering teams can safely take to the moon and back. We have notable customers like Notion, Linear, Shopify, and Snowflake. Our growth and retention metrics are best-in-class among our peers: we have tens of millions in ARR, growing >100% year over year, over 2500 customers, very low churn, and many years of runway. We’ll share more details once we meet, but you now probably have a good idea as to why we're hiring for this role 😅. We’ve listed this role twice: as a Platform Engineer and Site Reliability Engineer – our team does both, and we are open to candidates who lean towards one or the other. About the role and how we work Hi 👋 I’m Colin, Head of EMEA Engineering. I’ve spent a number of years leading engineering teams in startups, and that has always included being close to infrastructure teams - no matter what name they’ve worn (SRE, infrastructure, platform, etc). I’ve got my hands dirty building the initial infrastructure for startups and know the value a talented infrastructure engineer brings. The rigour, the discipline, the peace and quiet when everything just hums along. Our infrastructure is in a good place for now. Nothing is static. Ashby continues to grow rapidly, putting strain on our existing infrastructure. We’re always looking to give our customers more powerful hiring software, and building new product features often requires new pieces of infrastructure. Having herded plenty of snowflakeservers in the past, I’ve learned there’s a better way. I (and Ashby) place a lot of value on code-as-infrastructure. As a Platform Engineer at Ashby, you’ll get to dive into scaling problems, add new capabilities to our platform, and think about how our entire team interacts with infrastructure. All our own engineers own their projects end-to-end and ship with minimal oversight. We don’t put roadblocks to ensure security when common sense will do and we don’t build processes like change management boards around the lowest common denominator. But with great power comes great responsibility: we handle personal and confidential data about some of the biggest decisions we ever make at work. As we grow, more and bigger customers rely on us to be reliable and secure and how we operate internally will need to evolve. We’re at an inflection point where our ability to scale and deliver a seamless experience has a make-or-break impact – we have some of the fastest growing companies using our platform every day to hire hundreds of people per month. We need someone like you to make good decisions, debug thorny issues, and build us a future-proof platform that can withstand this scale. Our small but mighty infrastructure team has set up a secure and simple environment (we don’t believe in spinning up a new service unless necessary!) for our growing product team to build in. That’s where you come in: you, too, will own projects end-to-end and have an impact on core parts of the Ashby developer and user experience. For instance, you could work on: Optimize our homegrown ultra-dynamic recruiting DSL-to-SQL compiler, and create tools to help developers do so Create automated guardrails for the security and privacy of our customer data Help our developers ship features fast through canary deploys, gradual rollouts and feature flags, while keeping complexity manageable and reducing downtime Work with the business and the engineering team to define SLOs and implement the corresponding SLIs. Ensure all communication with external services supports retries and circuit-breakers. Implement the infrastructure to support an event-driven architecture and data warehouse. We’re looking for someone who can build systems that an engineer would like to work with: mature and boring but open-minded and approachable. We have to balance reliability with flexibility. Software and its availability are now mission critical to almost every working professional. To be in an SRE in today’s world, you have to be extremely comfortable evaluating risk, those you take and those others take. Why you should or shouldn’t apply You should apply if: You never stop. You get weirdly obsessed about a problem that doesn’t yet make sense, turn it every which way in your head until the explanation dawns. You’ll search every rock, inventory every clue, hunt every mismatch. We do that, too - together we’ll be armed with state-of-the-art monitoring tools and an impressive amount of data, and join you in the adventure. You don’t take shortcuts. You’re speaking up for the future user, the edge case, the doomsday design. You know product engineers want to build it with you, and see them as allies, where you give them the power and knowledge to access greater things. You’re someone who cares about what you do and the team you do it with, and want to work with others who do as well. You’ll be on interview panels choosing your next colleagues, and you’ll take that seriously. You only want to work with people who make you better, and want to make you better. You’ve built infrastructure at a slightly later stage than Ashby is at - you know how to deal with millions of data points, have seen great (or not great) infrastructure make or break customer experience, and have automated everything from provisioning to monitoring and release process. You’re a Swiss army knife (all nationalities welcome ;) ). You’ll get every hard problem the company faces. You’ll get to do infrastructure updates, security enforcements, database optimization, Kubernetes debugging, and digging through Typescript traces figuring out what doesn’t work. You probably don’t feel like an expert at at least some of that... and that appeals to you. All that makes for a pretty specific kind of role, and the job isn’t to everyone’s tastes! You should not apply if: You don’t want to make your own decisions on what is the best paved road to build for Ashby, and expect a lead or manager to make the final call on what that is. Our leads (and managers) give ample commentary and feedback on technical decisions and how they’re made, but you ship what you want to build and are accountable for it. You hate SQL. We have a lot of features built around making the best out of data, and our platform engineers also sometimes dive into a gnarly report or advise engineers on a more performant data model to use. You don’t want to code. Our SREs are some of our best software engineers and they are just as responsible for the application as the other engineering teams - albeit at a platform level. Reviewing code and submitting code changes will be part of your day to day. Your primary mode of communicating best practices to engineers is live meetings. We’re a very async culture and written communication (and code) is how changes get made. As an Ashby SRE, you will need to share new tooling and best practices with engineers faster than your next meeting opportunity will take you. You’ve never delivered a project, on your own, without someone prodding you for updates. We have no project or delivery managers to fill your calendar with busy work, but the flip side is you have to do your project management, seek the help you need to get unstuck and cut scope when it’s worthwhile. Technology Stack I’m sharing our tech stack with the caveat that we don’t require previous experience in it: TypeScript (frontend & backend), Node.js, React, Apollo GraphQL, Postgres, Redis. We use Datadog and Sentry on 100% cloud-based (AWS) infra. We take developer experience and reliability seriously: all engineers are on call in a follow-the-sun model, and everyone contributes to developer tooling. What We’re Building As engineers, we are used to tooling that makes us better at what we do. When we started Ashby, we saw the opposite with Talent Acquisition software. Recruiting teams were leveling up how they did their work, but instead of software meeting this new standard, it held them back. Scheduling a final round is an excellent example. Recruiting teams wanted to schedule candidates faster, track interviewer preparation and quality, and do it with half the headcount. A recruiter needed to manually collect availability from the candidate, identify qualified interviewers, perform “Calendar Tetris” to find who is available to interview the candidate, schedule on the earliest date possible, and make any last-minute adjustments as availability changed. They must do this while considering the interview load on each individual and whether interviewers need to be trained and shadowing others. 🥵 TA software didn’t help. As hiring managers, we know TA is a critical function, and as engineers, we know software can do better. So, we built and continue to build Ashby to give TA teams the highest standard of tooling. Software that’s intelligent and powerful. Software that provides insights into where they’re failing and automates or simplifies many of the tasks they’re underwater with. We want other functions and departments to be jealous of what TA teams can do with Ashby, and today they often are! Engineering Culture Our engineering culture is motivated by Abhik and Benji’s (our co-founders) belief that a small talented team, given the right environment, can build high-quality software fast (and work regular hours!). We do it through: Minimal process with ownership over decisions normally made by product and design Natural collaboration and deliberate communication Investing in tools and abstractions that give us leverage Putting effort into building a diverse team Minimal Process & Lots of Ownership The best engineers we’ve worked with delivered reliably magical outcomes. They took customer problems and relentlessly drove them to solutions that were not only successful but often brilliant and creative. While they did this with minimal oversight, stakeholders were never in the dark as to what was going on, and no setback was a surprise. Traditional product-development processes aren’t meant for the best engineers. Their purpose is to create consistent outcomes regardless of the engineer’s skill. But, consistency comes at the expense of an engineer’s time and freedom—both ingredients necessary to generate those magical outcomes. As a result, process stifles the best engineers and doesn’t give others the opportunity to practice the behaviors that made the best engineers the “best.” At Ashby, we want to build an environment that encourages every engineer to be their best. So, at Ashby, every Engineer runs their project. Product Managers (and Designers) build strategy, do customer research, and hand off problem briefs to Engineers. Engineers take on the rest: they research the problem, write product specs, build wireframes, and implement their solution end-to-end. We rely on engineers, not process, to push information outward to the relevant folks (e.g., Product Managers) and pull folks in to help (e.g., Designers, Infra). It’s a new level of ownership for many engineers, but we’d rather an engineer fail a bit and coach up their skills than use process as a crutch. Not everyone succeeds in our culture, but those who do thrive. Collaboration is Natural & Communication is Deliberate Our engineering team consists of lifelong learners who are talented but also humble and kind (meet them here!). These attributes create an environment where collaboration happens naturally. We combine this with research, prototyping, and written proposals to see around corners and get feedback from the team across time zones. Focus time is something that we hold sacred, and, with thoughtful and deliberate communication, engineers are in <2h meetings per week (Abhik wrote about it here). To drive it home, here's a recent calendar of an engineer who has been with us for over 4 years: We also meet in person at least twice a year, once as a department and once as a company. You also have a small budget to meet up with folks in your city/region. Increase Leverage, not Team Size We built Ashby with the quality, breadth, and depth that many customers would expect from much larger teams over larger time scales. We’ve done this through investment in: Great developer tooling. Our CI/CD takes ~10m, and we deploy at least 15x a day. A debugger that works out of the box. Everyone on the team has contributed to our developer experience 💪🏾. Building blocks to create powerful and customizable products fast. At the core of Ashby is a set of common components (analytics modeling and query language, policy engine, workflow engine, design system) that we constantly improve. Each improvement to a common component cascades throughout our app (short video below). Here’s an impromptu quote from Arjun in our company Slack of what it’s like to build a feature at Ashby: And a demo of one of these building blocks: Put Effort into Diversity Diverse teams drive innovation and better outcomes. Having seen my mother and partner build their careers as minority women in non-diverse fields, I want to make sure Ashby creates opportunities for the next generation of engineers from underrepresented groups. Today, 21% of engineers at Ashby are from underrepresented groups. It’s not great, and we are taking conscious steps to improve, like sourcing diverse candidates, providing generous paid family leave, no leetcode interviews, and more. Interview Process At Ashby, our team and interview process want to help you show your best self. We’ll dive into past projects and simulate working together via pair programming, writing product and tech specs collaboratively, and talking through decisions. There are no leetcode or whiteboard exercises. Our interview process is three rounds: Introduction call with Hiring Manager (15 to 30m, live) A technical screen where we pair in our actual codebase (1h, live) Three non-coding interviews that focus on technical design, debugging incidents, and infrastructure (3h 15m, live can be split across multiple days) Depending on our leadership team’s bandwidth, we may start with an additional 30m screen with a recruiter. Your hiring manager will be your main point of contact and prep you for interviews. Each round will have written guidance so you know what to expect (you’ll need minimal preparation). You’ll meet 4 to 6 people in engineering (with 5-15 minutes in each interview to ask them questions). If we don’t give an offer, we’ll provide feedback! Your First Three Months at Ashby We want an exceptional onboarding experience for every new hire. At Ashby, your dev environment is set up with a single script, you push your first product change on day one, and you spend the rest of your time shipping product changes that give you a tour of our codebase and b

Job Description Title: Bar-back Location: TOM Chicago Reporting to: TOM Management Brand Video: Role overview: We love what we do – and it shows! Time Out Market is the division of Time Out that brings our food and cultural experiences to life for our guests, readers and clients. Our Market Bar-backs provide outstanding guest service and products to ensure that each of our guests enjoy a memorable experience with each visit. Responsibilities: -Provide service to Bartenders, Beverage Runners and Guests in a timely manner -Assist bartender with taking guest orders and ensuring proper product is served to guests -Appear in uniform for all shifts at scheduled time -Polish and wash glassware throughout the shift -Prepares all mixes and garnishes -Ensure proper rotation of all liquor, beer, wine and consumable items -Keep bar top clean and free of dirty glasses, dirty ashtrays, trash, etc. throughout shift. -Keep back bar clean and organized. -Clean all spills and waste immediately. Sweep and mop as needed. Place all trash in proper receptacles -Proper setup and maintenance of event and or banquet function spaces -Assist with loading/unloading of miscellaneous equipment, such as boxes, food and beverage product -Responsible to ensure all stocking is complete, requisitions are filled out and any shortage of stock is reported -Maintain opening/closing liquor, beer, wine and consumables par -Inform management of any complaint, comments or incident -Ability to create and maintain service rapport -Respond to guest inquiries and requests in a courteous and polite manner -Anticipate guest needs -Provide information to guests regarding our venues, menus and pricing -Adhere to all company standard operating procedures. Maintain all company service sequence standards -Recognize and cultivate regular Guests and repeat business -Maintain line of sight/atmosphere control by circulating through your work area throughout shift -Report any incidents of theft, vandalism, or violations -Respond to Guest concerns/complaints and correct errors or resolve complaints with a positive attitude -Recognize and acknowledge when Guests are becoming intoxicated and/or are intoxicated -Monitor potentially intoxicated and/or disruptive Guests and promptly bring to a Manager’s attention -Comply with all safety and health department procedures as well as Company and/or departmental policies/procedures and all state and federal liquor laws. Maintain Company Safety and Sanitation Standards -Ensure nightly/weekly and opening/running/closing duties are completed -Record and report any equipment failure and/or safety hazards to a Manager immediately Skills: -Create and maintain a sense of urgency -Ability to perform basic mathematical equations -Must have strong problem-solving skills -Ability to communicate effectively and assertively in the English language, both verbally and in writing with staff, clients, and the public -Ability to maintain a high level of confidentiality -Ability to demonstrate a positive attitude always -Ability to keep an open and objective view -Ability to listen empathetically and be respectful always -Ability to maintain composure and stay focused -Ability to maintain personal integrity -Ability to work as a team, stay organized, handle various projects at one time, follow up and make accurate decisions -Ability to handle a fast-paced, busy, and somewhat stressful environment, and work under pressure and meet deadlines What we look for in a candidate Time Out is a company filled with individuals as diverse as the cities we are in and cover. At the same time there are common characteristics and values we all share. To join our team, you’ll want to… • Be commercially astute, • Want to dive headfirst into great service and hospitality company, • Have excellent communication and relationship building skills, • Have a high sense of ownership, urgency and drive, • Be a team player About our culture At Time Out Group we believe in diversity and equal opportunity for all people. We do not discriminate against external or internal candidates on the basis of age; disability; gender, gender reassignment; race; religion or belief; sexual orientation; marriage and civil partnership; pregnancy and maternity. We believe that diversity develops creativity and enables personal and professional growth where we all learn from each other. We believe in an open culture where ideas are shared candidly and where there is no fear of failure, but rather an understanding that we must experiment and have the freedom to succeed. We believe that everyone has the right to express themselves as they are as this enriches us all. We believe in an open world, social justice, and the pursuit of happiness, after all, we are in the happiness business. About Time Out Group plc Through Time Out Media and Time Out Market we help our large audience go out in the world's greatest cities and connect global brands as well as local talents with this valuable audience. About Time Out Group Time Out Group is a global brand that inspires and enables people to experience the best of the city. Time Out launched in London in 1968 to help people discover the best of the city - today it is the only global brand dedicated to city life. Expert journalists curate and create content about the best things to Do, See and Eat across 333 cities in 59 countries and across a unique multi-platform model spanning both digital and physical channels. Time Out Market is the world's first editorially curated food and cultural market, bringing a city's best chefs, restaurateurs and unique cultural experiences together under one roof. There are currently Markets in ten cities including Lisbon, New York and Dubai, with several new locations expected to open in 2025 and beyond, in addition to a pipeline of further locations in advanced discussions. Time Out Group PLC, listed on AIM, is headquartered in London (UK). About Time Out Market Time Out Market is the world’s first editorially curated food and cultural market, bringing a city’s best chefs, restaurateurs, drinks and cultural experiences together under one roof. From award-winning chefs to much-loved local gems, from cooking classes with top chefs to installations from local artists and live entertainment, Time Out Market captures and celebrates the best of the city. The first Time Out Market opened in 2014 in a historic market hall in Lisbon, quickly turning into one of the most popular destinations in the city. The success of Lisbon brought further expansion, and there are currently Markets in eleven cities including New York, Montreal, Dubai and Cape Town, with several new locations expected to open in 2025 and beyond, in addition to a pipeline of further locations in advanced discussions. Time Out Market is part of Time Out Group PLC (AIM: TMO), a brand that inspires and enables people to experience the best of the city through Time Out Media and Time Out Market. Time Out launched in London in 1968 to help people discover the exciting new urban cultures that had started up all over the city – today it is the only global brand dedicated to city life. Expert journalists curate and create content about the best things to do, see and eat across 333 cities in 59 countries, and across a unique multi-platform model spanning both digital and physical channels. Time Out is a dynamic, pioneering brand and so is our team. We want to work with the best and brightest talent because we work for the world’s greatest cities, the people enjoying them and the businesses in them. As a truly global team we get to collaborate with colleagues from New York to Paris, Cape Town and Sydney and beyond. It’s our expertise, authenticity and collaboration that make us successful and a unique team.

Job Description Are you seeking your next career challenge in industrial maintenance? Do you take pride in using your hands to diagnose and complete a variety of routine and complex equipment work orders alongside your team members? If you are looking for an opportunity to work for a stable, family-owned employer who values growth and learning, then Daubert Chemical Company would like to talk with you. We are seeking a hands-on, highly skilled and motivated Industrial Maintenance Technician to work at our plant located in Forest View, IL, near Midway Airport. Daubert offers the following benefits: • $28.00-$32.00/hr starting base pay; annual increase reviews, • Bonus opportunity, • BCBS of Illinois Medical & Dental and Vision Service Plan, • 401(k) with immediate company match, • Paid time off with 11 annual Holidays plus vacation and sick time, • Disability, Family, & Military Leave. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform preventive and predictive maintenance using established best practices to ensure equipment reliability and uptime., • Apply 5S organizational principles and demonstrate a strong commitment to safety, cleanliness, and high-quality work standards., • Maintain safe work practices while operating in challenging environments, including dirty or steam-heated areas., • Inspect, diagnose, repair and maintain production equipment used in a chemical manufacturing environment., • Read basic blueprint (P&ID is a plus)., • Conduct basic electrical troubleshooting - 460VAC, 220VAC, 110VAC., • Install and maintain up to 3” piping systems and related instrumentation or process equipment (e.g. process gauges, transducers, thermocouples, etc.)., • Assist in the planning and installation of new equipment, piping, electrical, etc., • Use CMMS software to document repairs and maintenance performed daily., • Effectively follow a prioritized planned work order schedule along with unscheduled order management., • Comply with all applicable OSHA standards and company policies and procedures, including but not limited to, safe work permits, hot work permits, LOTO, PPE, fall protection, confined space, etc., • Outdoor work in all weather conditions., • Support the team with after-hours outages by fulfilling a role in a rotating call-in program., • High school diploma or G.E.D. is required. Associate's degree, certificate, or apprenticeship training in a related field from a vocational/technical school or college is highly preferred. Combination of education and related experience will be considered., • Minimum 3 years’ experience in industrial maintenance environment., • Chemical processing industry and related equipment experience (mixers, pumps, steam systems, fabrication, electrical, welding) is preferred., • General computer skills are used to access company data, such as internet, CMMS and online employee training requirements., • Ability to safely operate Powered Industrial Trucks, such as forklift, scissors lift, etc. ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and fumes or airborne particles. The employee is frequently exposed to wet and/or humid conditions and risk of electrical shock. The employee is occasionally exposed to high precarious places; working outside in all weather conditions, e.g. extreme cold or heat. The noise level in the work environment depending on the area can be quiet to moderate to loud. Relocation assistance is not available. Must be authorized to work in the U.S. Equal Opportunity Employer: Disability/Veteran Powered by JazzHR WbYMMnuCDA

Job Description We are expanding and looking to add a maintenance electrician to our team! Employee Referral Bonus offered: $1,000 Pre-employment requirements • Authorized to work in the United States., • Inspect electrical equipment, wiring, fixtures, and other components to ensure they remain functional and are up to code, as well as to identify any hazards or issues., • Determine the reasons for any malfunctions of systems or components and create a maintenance or repair plan to solve the problem., • Repair electrical systems, wiring, circuit breakers, equipment, and other components so that they remain fully functional in a production environment., • Test systems with devices such as voltmeters, mergers, and ohmmeters to ensure the system remains safe and that components are compatible., • Review blueprints to understand the wiring to troubleshoot component problems, • Provide suggestions on the lifespan of equipment and other electrical components, advising when certain components should be replaced due to potential risks., • Keep records of all maintenance and repair work conducted, including a record of any supplies ordered and used., • Ensure all routine maintenance work is handled on a regular schedule to reduce the risk of larger and more complex issues and to reduce costs., • Three-phase and single-phase experience required 120/240/480 volt, • Ability to troubleshoot complex circuits, • Experience installing Rigid and EMT conduit up to 2”, • Lockout Tag out and Electrical Safety Experience You will get dirty as it is a heavy industrial facility. • 2 or 4-year degree in EE or EET or 3-5+ years equivalent experience, • PLC experience – preferably Allen Bradly, some Siemens a plus – min 1 year, • 480V 3-Phase power experience preferably in manufacturing, • Mechanical and electrical troubleshooting experience, • Ability to read electrical schematics., • NFPA 70 (NEC) & 70E (electrical safety) familiarity, • Industrial manufacturing experience a plus, • Arc flash training a plus, • Previous experience in electrical engineering or other related fields, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Customer Service, • PLC Troubleshooting Skills, • Bachelor's Degree, • Electrical Schematics, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Hydraulics Experience, • PLC Programming Experience, • PLC Wiring Experience, • Machine Safety Inspections, • Meets Physical Requirements, • Programmable Logic Controller (PLC)

Job Description SUMMARY The Helper A is a union represented position responsible for keeping exteriors, public areas, vacant units, sidewalks, and alleyways of property clean and safe. The Helper A performs timely work order service, quality make-ready programs, and cost-effective inventory control of the property. This position will also be expected to assist in other types of basic maintenance such as grounds and other janitorial duties when necessary. Required to be on a rotational “24 hour on call” as scheduled. ESSENTIAL JOB FUNCTIONS include the following. • Complete tasks as assigned by the Head or Assistant Head Janitor or the property manager., • Participate in a stand-by emergency schedule for evening, weekend, and holiday coverage., • Perform scheduled maintenance on all equipment, based on the manufacturers’ recommendations and operating manuals., • Inspect all units, buildings, and public areas periodically and perform repairs and janitorial assistance as needed., • Check and replace outside and hallway lights, as well as public area lighting., • Possess knowledge regarding water and gas meter cutoffs, all apartment fixture cutoffs and sewer cleanouts., • Keeps in clean and orderly condition the following: office, maintenance room, hallways, porches, public areas (laundry room, basement), back yard, and exterior building., • Performs minor and routine painting, plumbing, electrical wiring, and other related maintenance activities using hand tools., • Cleans and replaces air conditioner filters., • Make sure storage areas and entrances are locked and adequate lighting is maintained., • Assists in apartment ‘move-in’ and ‘move-out’ inspections and unit turnover., • Repairs forced air furnaces and minor repairs to steam and hot water systems., • Participates in all maintenance projects., • Performs light electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc., • Performs light plumbing work such as clearing stoppages, replacing fittings, etc., • Replaces broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, draperies, and locks., • Can paint interior and exterior., • Performs carpentry work such as fitting doors, freeing windows, replacing, and building shelves, sanding, and refinishing wood., • Assists in custodial work cleaning public areas by sweeping, mopping, vacuuming, emptying trash, cleaning windows, etc., • Assists in grounds work when necessary: snow removal, lawn care, and gardening., • Repairs concrete, masonry, roof, fencing when required., • Performs limited extermination services when required., • Notifies concerns to immediate supervisors., • Perform, and report on, all work according to the safety standards of the company, OSHA, and health codes. Perform work area clean-up daily., • Assists on other properties as needed. WORKING ENVIRONMENT The Helper A performs their work in a residential apartment setting and will be working outdoors, indoors, office and field/grounds while performing the essential functions of this job. Must be willing and able to work in cold, hot, wet, humid, smelly, dirty, and clean work environments to include garden, alley parking lots, basement, roof, and office areas. Position experiences interruptions and shifting priorities. May be required to deal with difficult people; expected to handle residents and visitors with calmness, diplomacy, and good social skills. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: required to stand; walk; use hands and reach with hands and arms; ability to lift, bend, squat, climb, and crawl repeatedly throughout the day and effectively communicate; The employee must lift and/or move up to 50 pounds on a regular basis. The employees will be using a variety of hand and power tools, chemicals, and paints. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regular, predictable, and punctual attendance are required job functions. This position also requires evening and weekend work as dictated by the on-call rotation schedule. Travel required me to purchase emergency supplies when needed. MINIMUM QUALIFICATIONS • High school education or equivalent., • Sufficient experience to provide strong working knowledge of maintenance and repair practices and techniques., • Minimum of 3 years of equivalent level experience, preferably in similar setting., • A minimum of one year experience in a customer service-related industry and one year apartment maintenance experience combined., • Must have or obtain UPCS Inspections certification., • Personable and trustworthy., • Show concern for a work safety program, • Can aid in and work in areas other than strictly repair maintenance (I.e., janitorial, custodial, gardening, painting, etc.)., • Must have or be able to attain/maintain union certifications as required by the position and the bargaining agreement., • Ability to lift 50 pounds., • Bilingual in English/Spanish may be required depending on resident demographic needs., • Provide your own hand tools., • Vehicle, insurance, and safe driving record. This position is represented by a collective bargaining agreement between the company and the SEIU Local 1 union. SUCCESS FACTORS • Exhibits knowledge of safety policies through work., • Provides excellent customer service and maintains respect and professionalism when interacting with tenants and coworkers., • Prioritizes work efficiently to complete work orders in a timely fashion., • Exhibits timeliness by arriving on time for work as scheduled and can work well with minimal supervision., • Collaborates well with coworkers to meet a common goal., • Sensitivity to diverse cultures., • Attends eight (8) hours of continuing education annually., • Can defuse a complicated issue between employees/residents

Job Description Are you seeking your next career challenge in industrial maintenance? Do you take pride in using your hands to diagnose and complete a variety of routine and complex equipment work orders alongside your team members? If you are looking for an opportunity to work for a stable, family-owned employer who values growth and learning, then Daubert Chemical Company would like to talk with you. We are seeking a hands-on, highly skilled and motivated Industrial Maintenance Technician to work at our plant located in Forest View, IL, near Midway Airport. Daubert offers the following benefits: • $28.00-$32.00/hr starting base pay; annual increase reviews, • Bonus opportunity, • BCBS of Illinois Medical & Dental and Vision Service Plan, • 401(k) with immediate company match, • Paid time off with 11 annual Holidays plus vacation and sick time, • Disability, Family, & Military Leave. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform preventive and predictive maintenance using established best practices to ensure equipment reliability and uptime., • Apply 5S organizational principles and demonstrate a strong commitment to safety, cleanliness, and high-quality work standards., • Maintain safe work practices while operating in challenging environments, including dirty or steam-heated areas., • Inspect, diagnose, repair and maintain production equipment used in a chemical manufacturing environment., • Read basic blueprint (P&ID is a plus)., • Conduct basic electrical troubleshooting - 460VAC, 220VAC, 110VAC., • Install and maintain up to 3” piping systems and related instrumentation or process equipment (e.g. process gauges, transducers, thermocouples, etc.)., • Assist in the planning and installation of new equipment, piping, electrical, etc., • Use CMMS software to document repairs and maintenance performed daily., • Effectively follow a prioritized planned work order schedule along with unscheduled order management., • Comply with all applicable OSHA standards and company policies and procedures, including but not limited to, safe work permits, hot work permits, LOTO, PPE, fall protection, confined space, etc., • Outdoor work in all weather conditions., • Support the team with after-hours outages by fulfilling a role in a rotating call-in program., • High school diploma or G.E.D. is required. Associate's degree, certificate, or apprenticeship training in a related field from a vocational/technical school or college is highly preferred. Combination of education and related experience will be considered., • Minimum 3 years’ experience in industrial maintenance environment., • Chemical processing industry and related equipment experience (mixers, pumps, steam systems, fabrication, electrical, welding) is preferred., • General computer skills are used to access company data, such as internet, CMMS and online employee training requirements., • Ability to safely operate Powered Industrial Trucks, such as forklift, scissors lift, etc. ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and fumes or airborne particles. The employee is frequently exposed to wet and/or humid conditions and risk of electrical shock. The employee is occasionally exposed to high precarious places, working outside in all weather conditions, e.g. extreme cold or heat. The noise level in the work environment depending on the area can be quiet to moderate to loud. Relocation assistance is not available. Must be authorized to work in the U.S. Equal Opportunity Employer: Disability/Veteran Powered by JazzHR NP8LTsB9Zk

Job Description SUMMARY The Helper A is a union represented position responsible for keeping exteriors, public areas, vacant units, sidewalks, and alleyways of property clean and safe. The Helper A performs timely work order service, quality make-ready programs, and cost-effective inventory control of the property. This position will also be expected to assist in other types of basic maintenance such as grounds and other janitorial duties when necessary. Required to be on a rotational “24 hour on call” as scheduled. ESSENTIAL JOB FUNCTIONS include the following. • Complete tasks as assigned by the Head or Assistant Head Janitor or the property manager., • Participate in a stand-by emergency schedule for evening, weekend, and holiday coverage., • Perform scheduled maintenance on all equipment, based on the manufacturers’ recommendations and operating manuals., • Inspect all units, buildings, and public areas periodically and perform repairs and janitorial assistance as needed., • Check and replace outside and hallway lights, as well as public area lighting., • Possess knowledge regarding water and gas meter cutoffs, all apartment fixture cutoffs and sewer cleanouts., • Keeps in clean and orderly condition the following: office, maintenance room, hallways, porches, public areas (laundry room, basement), back yard, and exterior building., • Performs minor and routine painting, plumbing, electrical wiring, and other related maintenance activities using hand tools., • Cleans and replaces air conditioner filters., • Make sure storage areas and entrances are locked and adequate lighting is maintained., • Assists in apartment ‘move-in’ and ‘move-out’ inspections and unit turnover., • Repairs forced air furnaces and minor repairs to steam and hot water systems., • Participates in all maintenance projects., • Performs light electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc., • Performs light plumbing work such as clearing stoppages, replacing fittings, etc., • Replaces broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, draperies, and locks., • Can paint interior and exterior., • Performs carpentry work such as fitting doors, freeing windows, replacing, and building shelves, sanding, and refinishing wood., • Assists in custodial work cleaning public areas by sweeping, mopping, vacuuming, emptying trash, cleaning windows, etc., • Assists in grounds work when necessary: snow removal, lawn care, and gardening., • Repairs concrete, masonry, roof, fencing when required., • Performs limited extermination services when required., • Notifies concerns to immediate supervisors., • Perform, and report on, all work according to the safety standards of the company, OSHA, and health codes. Perform work area clean-up daily., • Assists on other properties as needed. WORKING ENVIRONMENT The Helper A performs their work in a residential apartment setting and will be working outdoors, indoors, office and field/grounds while performing the essential functions of this job. Must be willing and able to work in cold, hot, wet, humid, smelly, dirty, and clean work environments to include garden, alley parking lots, basement, roof, and office areas. Position experiences interruptions and shifting priorities. May be required to deal with difficult people; expected to handle residents and visitors with calmness, diplomacy, and good social skills. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: required to stand; walk; use hands and reach with hands and arms; ability to lift, bend, squat, climb, and crawl repeatedly throughout the day and effectively communicate; The employee must lift and/or move up to 50 pounds on a regular basis. The employees will be using a variety of hand and power tools, chemicals, and paints. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regular, predictable, and punctual attendance are required job functions. This position also requires evening and weekend work as dictated by the on-call rotation schedule. Travel required me to purchase emergency supplies when needed. MINIMUM QUALIFICATIONS • High school education or equivalent., • Sufficient experience to provide strong working knowledge of maintenance and repair practices and techniques., • Minimum of 3 years of equivalent level experience, preferably in similar setting., • A minimum of one year experience in a customer service-related industry and one year apartment maintenance experience combined., • Must have or obtain UPCS Inspections certification., • Personable and trustworthy., • Show concern for a work safety program, • Can aid in and work in areas other than strictly repair maintenance (I.e., janitorial, custodial, gardening, painting, etc.)., • Must have or be able to attain/maintain union certifications as required by the position and the bargaining agreement., • Ability to lift 50 pounds., • Bilingual in English/Spanish may be required depending on resident demographic needs., • Provide your own hand tools., • Vehicle, insurance, and safe driving record. This position is represented by a collective bargaining agreement between the company and the SEIU Local 1 union. SUCCESS FACTORS • Exhibits knowledge of safety policies through work., • Provides excellent customer service and maintains respect and professionalism when interacting with tenants and coworkers., • Prioritizes work efficiently to complete work orders in a timely fashion., • Exhibits timeliness by arriving on time for work as scheduled and can work well with minimal supervision., • Collaborates well with coworkers to meet a common goal., • Sensitivity to diverse cultures., • Attends eight (8) hours of continuing education annually., • Can defuse a complicated issue between employees/residents

Job Description Company Description: hth companies is an industrial services provider offering mechanical insulation, scaffolding, industrial cleaning, and various other services to meet our customers' needs across the Midwest. At hth companies, we continue to promote the merit shop philosophy we were founded upon in 1984; rewarding employees based upon their merits of skills, productivity, and quality workmanship. Our vision is to be an organization that creates an environment where employees are encouraged to develop their full potential to provide quality work. We strive each day to better serve our customers and employees. Position Overview: The Millwright will repair, maintain, and facilitate installation of industrial equipment used in manufacturing and production operations. The Millwright will install, dismantle, repair, reassemble, and move equipment on work sites. They will work on pumps, compressors, gearboxes, conveyors (screw/paddle/belt), values and piping, etc. They must be able to read highly technical instructions and blueprints on equipment systems. Knowledge on how machinery works so repairs can be made when needed. Must be willing to work in various conditions (wet/dry, clean/dirty, hot/cold, inside/outside). Candidate will use a variety of hand and power tools, such as impacts, wrenches, as well as equipment for welding, brazing, and cutting. Responsibilities and Duties: • Ensures proper operation of large industrial equipment such as power generators, turbines, mining devices, assembly line machinery, and machinist tools., • Uses hand tools, hoists, jacks, spud wrenches, micrometers, laser alignment and power tools to assemble, install, align, and adjust piping, valves, pumps, and other various equipment., • Ensures machines perform to specifications by conducting tests; modifies and fine tunes machines., • Dismantling of existing connected and independent equipment., • Gathers and assembles parts for repairs or modifications based on blueprints., • Troubleshoots and repairs machines including when unexpected issues arise., • Performs preventive maintenance makes repairs on older machines., • Provides advice and recommendations to management concerning new machinery., • Plans and facilitates installation of new or refurbished machinery, which may include building platforms and foundations., • Conducts safety inspections of facilities., • Maintains records, including safety logs and inspection details., • Assist with jobsite safety to comply with all OSHA regulations and the hth companies' Safety Program., • Actively champions a positive workplace and safety culture. Education and Experience • Basic math skills., • Ability to use a variety of tools, which may include blowtorches, saws, pipe benders, and welding torches., • Thorough and broad understanding of a variety of equipment., • Ability to read and understand blueprints and schematics., • Strong analytical and problem-solving skills., • Thorough understanding of safety practices, guidelines, rules, and laws., • Ability to read schematics and blueprints., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Working understanding of safety principles, practices, and procedures., • Excellent time management skills with a proven ability to meet deadlines., • Ability to function well in a high-paced and at times stressful environment., • Excellent organizational skills and attention to detail., • Ability to problem solve and develop solutions., • Follows directions of manager / lead / superintendent and clarifies responsibilities if needed., • Respects self, co-workers, managers, company, other contractors, and clients., • Adaptable in methods used to complete task., • Always have a support and teaching mindset., • Ability to read, analyze, and address complex data or situations., • Excellent communication skills - maintaining professionalism when communicating with staff and prospective employees alike., • Willing to go the extra mile., • Motivated to learn new skills., • Respects self, co-workers, managers, company, and prospective employees., • Shows up on time ready to complete work., • Ability to lift, push, pull and move up to 50 lbs. on a routine basis., • Ability to climb Ladders and stairways regularly throughout the work shift., • Ability to observe conditions and others as safety attendant staying alert while seated for long periods of time as needed., • Ability to use hand tools, power tools, and other tools and equipment in a safe and controlled manner., • Ability to perform inspections of site, tools, and equipment., • Ability to perform behavioral observations focused on safety and process improvement., • Employer Supplemented Health Insurance., • Employer Paid Life Insurance., • Voluntary Vision and Dental Insurance., • Voluntary Critical Illness and Group Injury Insurance., • 401K (Company Match of 3%).

Job DescriptionWe’re hiring people to join our team as BUSSERS! A Few of Our Busser Benefits: • Restaurant Discounts, • Employee Assistance Program - Focusing on a Commitment to Mental Health & Wellness, • Paid Vacation for Qualifying Employees, • Blue Cross Blue Shield Medical Insurance, • Dental & Vision Insurance, • Life, Accident Protection & Critical Illness Insurance, • Domestic Partner Benefits, • 401(k) Crying Tiger, from James Beard Award Finalist Chef Thai Dang (HaiSous Vietnamese Kitchen) and Lettuce Entertain You Restaurants, is slated to open later this year at 51 West Hubbard Street in Chicago’s River North. The restaurant’s menu draws inspiration from Thailand, Vietnam, Laos, Cambodia and beyond. Beverage Director and Partner, Kevin Beary (Three Dots and a Dash, The Bamboo Room and Gus’ Sip & Dip), will curate Crying Tiger’s beverage menu, incorporating regional flavors into original cocktails. Caring. Creative. Careers. Join the Lettuce Entertain You team! Our 100+ restaurants are nationally recognized for great food and service and as great places to work. We hire and care deeply for people with creativity, passion and the drive to be the best. And we reward our teams with top notch benefits, career-long training and development and opportunities for growth. If you want a career at a progressive company with a long-standing commitment to people, join our caring and creative team. EOE. We participate in E-Verify / Participamos en E-Verify BUSSER JOB DESCRIPTION Bussers are responsible for assisting the service team in exceeding the guest’s expectations. Assists with Barista duties as directed. Teamwork, organization and good awareness are necessary for success in this position. Essential Functions • Clean and reset tables and transport dirty dishes to bus tub, tray or dish room, • Available to work a variety of hours, days and shifts, including weekends, • Effectively service a minimum of an eight table section, • Safely and effectively move chairs, tables, highchairs and booster seats, • Clean and reset tables and transport dirty dishes to bus-tub, tray or dish room, • Safely and effectively use and operate all necessary tools and equipment, • Ability to effectively communicate in order to perform and follow job requirements in written and spoken direction, • Ability to multitask calmly and effectively in a busy, stressful environment, • Work in a confined, crowded space of variable noise and temperature levels, • Able to move and lift up to 10 pounds, frequently move and/or lift up to 25 pounds, and occasionally move and/or lift up to 50 pounds, • Ensure the overall guest experience exceeds expectations and anticipate guests’ needs, • Greet guests with a warm, sincere smile, • Use tact and good judgement when dealing with guest challenges and respond to guest needs with patience and courtesy, • Assist service team with all food and beverage service, • Follow all steps of service, • Understand and follow the food allergy procedure and special orders/restrictions, • Comply with all safety and sanitation guidelines and procedures, • Follow all rules, policies, procedures and conditions of employment, including those outlined in the Employee Handbook, • Get along well with others and be a team player, • Other duties will be assigned as needed

Job Description • We are hiring immediately for a full time DISHWASHER position., • Location: Cafe 71 - 71 South Wacker, Chicago, IL 60606. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, hours may vary. More details upon interview., • Pay Range: $21.75 per hour to $22.00 per hour We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1479344. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Maintains dishes, pots, pans, trays, kitchen, work areas, equipment and utensils in orderly and sanitary condition. Essential Duties and Responsibilities: • Scrapes and rinses food from dirty dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Washes pots, pans and trays based on assigned procedures. Ensure complete cleanliness and sanitation., • Polishes silver using burnishing machine tumbler, chemical dip, buffing wheel and hand cloth depending on assigned equipment and procedures. Ensures complete cleanliness and sanitation., • Ensures compliance with outlined safety procedures., • Maintains temperatures and chemical levels as outlined by provided standards., • Keeps dish area orderly and in compliance with safety standards., • Sweeps and mops kitchen floors to ensure compliance with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it in designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Helps load and unload supplies and product. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1479344 [[req_classification]]

Job DescriptionBenefits: • Employee discounts, • Flexible Scheduling, • Competitive Compensation Responsibilities • Wipe down tables, chairs, and other surfaces, • Remove tablecloths and reset tables, • Remove dirty dishes, glasses, and silverware from tables, • Perform other duties as assigned, • Refill coffee, water, and condiments as neededQualifications, • Previous experience in hospitality or food service is preferred, • Familiarity with food safety guidelines, • Ability to work in a fast-paced environment, • Ability to stand for long periods and lift up to 30 pounds, • Friendly and outgoing personality

Job DescriptionBenefits: • Flexible Scheduling, • Competitive Compensation Responsibilities • Wipe down tables, chairs, and other surfaces, • Remove tablecloths and reset tables, • Remove dirty dishes, glasses, and silverware from tables, • Perform other duties as assigned, • Refill coffee, water, and condiments as neededQualifications, • Previous experience in hospitality or food service is preferred, • Familiarity with food safety guidelines, • Ability to work in a fast-paced environment, • Ability to stand for long periods and lift up to 30 pounds, • Friendly and outgoing personality

Job Description Culinaire • We have an opening for a part time BUSSER position., • Location: MCA Chicago - 220 East Chicago Avenue, Chicago, IL 60611. Note: online applications accepted only., • Schedule: Part time schedule. Days and hours may vary; weekends are required. More details upon interview., • Requirement: Some previous bussing experience required. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link to apply. Your referral will be able to apply by clicking the link in the email. You can check the status through your profile, accessible via Careers in PeopleHub, by clicking on ‘referral tracking.’ For Employee Referral guidelines, FAQs and the Compass Employee Referral Policy, email . CULINAIRE provides upscale food and beverage management services to a very diverse collection of national accounts to include art museums, cultural landmarks, hotels, performing theaters, restaurants, and special event venues. While our portfolio is diverse, the one constant in every operation that we manage is our total commitment to our associates to put their career path, safety, and success as top priority, and to our client to provide top quality food product and service to our customers and guests. Job Summary Summary: Sets and clears restaurant tables; stocks all service stations; assists food servers with table service. Essential Duties and Responsibilities: • Quickly clears dirty table settings and prepares table for resetting; promptly and consistently resets all serviceware as prescribed., • Maintains stock and cleanliness of stations for all meal periods with necessary equipment, including silverware, linen and condiments; wipes down booths and chairs, moves tables and chairs, and cleans floors as necessary., • Serves guests beverages, breads and butter and replenishes as necessary; assists servers with food and beverage service., • Transports all dirty tableware from dining room to dishwashing area., • Performs any general cleaning tasks using standard cleaning products as assigned by supervisor., • Folds napkins throughout the day to maintain an adequate supply., • Performs all assigned side work, including replenishing condiments and restocking side stands., • Perform other duties as assigned, such as cleaning unexpected spills, handling special guest requests, and greeting and seating guests. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. *Los Angeles applicants: Compass Group will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box ordinance). Associates at Culinaire are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs)

Job Description We’re hiring people to join our team as DISHWASHERS! A Few of Our Dish Team Benefits: • Restaurant Discounts, • Employee Assistance Program - Focusing on a Commitment to Mental Health & Wellness, • Paid Vacation for Qualifying Employees, • Blue Cross Blue Shield Medical Insurance, • Dental & Vision Insurance, • Life, Accident Protection & Critical Illness Insurance, • Domestic Partner Benefits, • 401(k) Aba, meaning father in Hebrew, is a Mediterranean restaurant with a California influence. With locations in Chicago and Austin, the menu features Top Chef Alum, Chef Partner CJ Jacobson’s modern approach to Mediterranean cooking and the beverage program showcases spirits and rare wines from lesser known Mediterranean regions. Caring. Creative. Careers. Join the Lettuce Entertain You team! Our 100+ restaurants are nationally recognized for great food and service and as great places to work. We hire and care deeply for people with creativity, passion and the drive to be the best. And we reward our teams with top notch benefits, career-long training and development and opportunities for growth. If you want a career at a progressive company with a long-standing commitment to people, join our caring and creative team. EOE. We participate in E-Verify / Participamos en E-Verify DISHWASHER JOB DESCRIPTION Dishwashers are responsible for washing and sanitizing all food service utensils and miscellaneous items such as plates, silverware, glassware, pots, pans, etc. Also responsible for assisting in maintaining the cleanliness of the back of house area. May have additional cleaning duties specific to the restaurant. Essential Functions • Operate and utilize the dish machine and cleaning supplies, • Wash, sanitize and dry all kitchen utensils, equipment and other items placed in the dish area or as requested by Management and Staff, • Available to work a variety of hours, days and shifts, including weekends, • Safely and effectively use and operate all necessary tools and equipment, • Ability to effectively communicate in order to perform and follow job requirements in written and spoken direction, • Multitask calmly and effectively under pressure, • Work in a confined, crowded space of variable noise and temperature levels, • Able to move and lift up to 10 pounds, frequently move and/or lift up to 25 pounds, and occasionally move and/or lift up to 50 pounds, • Ability to stand and walk for an entire shift and move safely through all areas of the restaurant, which may include stairs, uneven or slick surfaces Key Responsibilities and Duties • Maintain a pace sufficient to prevent back up of dirty dishes, glasses, etc., • Return and restock all items to appropriate area after washing and sanitizing procedures are completed, • Ability to read a thermometer, • Maintain dishwashing machinery and communicate any potential issues to Management, • Identify cleaning supplies and notify Management when running low, • Assist with general cleanliness of the back of house and restrooms, • Empty garbage (checking for restaurant supplies) and keep garbage areas clean and covered, • Comply with all safety and sanitation guidelines and procedures, • Follow all rules, policies, procedures and conditions of employment, including those outlined in the Employee Handbook, • Get along well with others and be a team player, • Other duties will be assigned as needed

Job Description We’re hiring people to join our team as DISHWASHERS! A Few of Our Dish Team Benefits: • Restaurant Discounts, • Employee Assistance Program - Focusing on a Commitment to Mental Health & Wellness, • Paid Vacation for Qualifying Employees, • Blue Cross Blue Shield Medical Insurance, • Dental & Vision Insurance, • Life, Accident Protection & Critical Illness Insurance, • Domestic Partner Benefits, • 401(k) Tre Dita and Bar Tre Dita are a collaboration between award-winning Chef Evan Funke (Felix, Mother Wolf, Funke) and Lettuce Entertain You. Italian for "three fingers," Tre Dita is a nod to the precise thickness of a properly cut bistecca Fiorentina, which the “cucina Toscana” serves from its open-hearth, wood-fired grill, along with handmade pastas and more. Located on the second floor of The St. Regis Chicago, designed by award-winning architect Jeanne Gang, Tre Dita offers sweeping views of Lake Michigan and the Chicago River in Chicago’s Lakeshore East and is open for dinner service seven nights a week. Caring. Creative. Careers. Join the Lettuce Entertain You team! Our 100+ restaurants are nationally recognized for great food and service and as great places to work. We hire and care deeply for people with creativity, passion and the drive to be the best. And we reward our teams with top notch benefits, career-long training and development and opportunities for growth. If you want a career at a progressive company with a long-standing commitment to people, join our caring and creative team. EOE. We participate in E-Verify / Participamos en E-Verify DISHWASHER JOB DESCRIPTION Dishwashers are responsible for washing and sanitizing all food service utensils and miscellaneous items such as plates, silverware, glassware, pots, pans, etc. Also responsible for assisting in maintaining the cleanliness of the back of house area. May have additional cleaning duties specific to the restaurant. Essential Functions • Operate and utilize the dish machine and cleaning supplies, • Wash, sanitize and dry all kitchen utensils, equipment and other items placed in the dish area or as requested by Management and Staff, • Available to work a variety of hours, days and shifts, including weekends, • Safely and effectively use and operate all necessary tools and equipment, • Ability to effectively communicate in order to perform and follow job requirements in written and spoken direction, • Multitask calmly and effectively under pressure, • Work in a confined, crowded space of variable noise and temperature levels, • Able to move and lift up to 10 pounds, frequently move and/or lift up to 25 pounds, and occasionally move and/or lift up to 50 pounds, • Ability to stand and walk for an entire shift and move safely through all areas of the restaurant, which may include stairs, uneven or slick surfaces Key Responsibilities and Duties • Maintain a pace sufficient to prevent back up of dirty dishes, glasses, etc., • Return and restock all items to appropriate area after washing and sanitizing procedures are completed, • Ability to read a thermometer, • Maintain dishwashing machinery and communicate any potential issues to Management, • Identify cleaning supplies and notify Management when running low, • Assist with general cleanliness of the back of house and restrooms, • Empty garbage (checking for restaurant supplies) and keep garbage areas clean and covered, • Comply with all safety and sanitation guidelines and procedures, • Follow all rules, policies, procedures and conditions of employment, including those outlined in the Employee Handbook, • Get along well with others and be a team player, • Other duties will be assigned as needed

Job Description We’re hiring people to join our team as BUSSERS! A Few of Our Busser Benefits: • Restaurant Discounts, • Employee Assistance Program - Focusing on a Commitment to Mental Health & Wellness, • Paid Vacation for Qualifying Employees, • Blue Cross Blue Shield Medical Insurance, • Dental & Vision Insurance, • Life, Accident Protection & Critical Illness Insurance, • Domestic Partner Benefits, • 401(k) Tre Dita and Bar Tre Dita are a collaboration between award-winning Chef Evan Funke (Felix, Mother Wolf, Funke) and Lettuce Entertain You. Italian for "three fingers," Tre Dita is a nod to the precise thickness of a properly cut bistecca Fiorentina, which the “cucina Toscana” serves from its open-hearth, wood-fired grill, along with handmade pastas and more. Located on the second floor of The St. Regis Chicago, designed by award-winning architect Jeanne Gang, Tre Dita offers sweeping views of Lake Michigan and the Chicago River in Chicago’s Lakeshore East and is open for dinner service seven nights a week. Caring. Creative. Careers. Join the Lettuce Entertain You team! Our 100+ restaurants are nationally recognized for great food and service and as great places to work. We hire and care deeply for people with creativity, passion and the drive to be the best. And we reward our teams with top notch benefits, career-long training and development and opportunities for growth. If you want a career at a progressive company with a long-standing commitment to people, join our caring and creative team. EOE. We participate in E-Verify / Participamos en E-Verify BUSSER JOB DESCRIPTION Bussers are responsible for assisting the service team in exceeding the guest’s expectations. Assists with Barista duties as directed. Teamwork, organization and good awareness are necessary for success in this position. Essential Functions • Clean and reset tables and transport dirty dishes to bus tub, tray or dish room, • Available to work a variety of hours, days and shifts, including weekends, • Effectively service a minimum of an eight table section, • Safely and effectively move chairs, tables, highchairs and booster seats, • Clean and reset tables and transport dirty dishes to bus-tub, tray or dish room, • Safely and effectively use and operate all necessary tools and equipment, • Ability to effectively communicate in order to perform and follow job requirements in written and spoken direction, • Ability to multitask calmly and effectively in a busy, stressful environment, • Work in a confined, crowded space of variable noise and temperature levels, • Able to move and lift up to 10 pounds, frequently move and/or lift up to 25 pounds, and occasionally move and/or lift up to 50 pounds, • Ensure the overall guest experience exceeds expectations and anticipate guests’ needs, • Greet guests with a warm, sincere smile, • Use tact and good judgement when dealing with guest challenges and respond to guest needs with patience and courtesy, • Assist service team with all food and beverage service, • Follow all steps of service, • Understand and follow the food allergy procedure and special orders/restrictions, • Comply with all safety and sanitation guidelines and procedures, • Follow all rules, policies, procedures and conditions of employment, including those outlined in the Employee Handbook, • Get along well with others and be a team player, • Other duties will be assigned as needed

Job Description Our Promise Balance - Quest fosters a fun, supportive environment that puts people first and strives for both culinary excellence and enduring relationships. Our flexible work opportunities encourage a healthy life balance for all of our valued team members. Meaning - Quest believes that every aspect of what we do has significance, and therefore, our food is fresh and made from scratch, using high quality and responsibly sourced ingredients. We nourish our communities with wholesome meals and through our genuine and personal connections. Recognition - Quest provides competitive compensation and benefits, and celebrates the fulfillment of our collective values at all levels of the organization. We support professional growth through training, development and access to highly visible leadership. Position Summary Performs a number of kitchen activities including pot washing, dishwashing, general cleaning duties, and storing food and non-food supplies. Maintains the cleanliness and sanitation of the dish area, kitchen, cafeteria and loading dock. Essential Duties and Responsibilities • Cascades the vision of Quest Food Management Services ensuring the Quest vision, values and founding principles are effectively communicated, understood and practiced., • Demonstrates commitment to Quest vision, values and missions through actions on a daily basis., • Set up cutting boards, trash cans, mats, dish machines and pot sinks., • Organize pot shelves so the same items are stored with the same items and it allows ease of access by the kitchen staff., • Wash all soiled kitchen equipment, pots pans, and small wares from daily kitchen production according to proper sanitation standards., • Maintain a system that ensures that the trashcans are continually emptied as needed and dispose of cardboard boxes by breaking them down and placing them in the recycling dumpster., • Ensure that the kitchen and pot room floors are continually swept and mopped to prevent slipping accidents from occurring., • Empty the dish machine and pot sink every two hours or as needed and refill with clean water and the proper chemicals., • Maintain high level of cleanliness of the kitchen, pot room, dish machine, mop room and storage areas. All areas must be swept and mopped at the end of each day. No dirty equipment shall be left for the next day., • Perform daily and weekly cleaning schedule., • Distribute and store clean pots, dishes, and utensils., • Record concentration of all sanitizing solutions in both the dish machine and 3 compartment sink., • Clean and sanitize production equipment, work surfaces, and kitchen according to cleaning schedule and procedures., • Keep floor drains clean and free of dirt, grease and trash., • Follow all Quest policies and food safety guidelines., • Report to scheduled shifts on time and in complete uniform., • Perform other duties as assigned. Job Requirements/Specifications Education and Experience: The requirements listed below are representative of the knowledge, skill, and/or ability required. Required: • High School Diploma/GED or equivalent work experience, • Ability to perform simple arithmetic as well as to understand measurements and conversions, • Responsible for meeting and maintaining state and local certification requirements (Food Handler certification) Preferred: • Previous experience in a similar role., • Previous experience in the food service industry working in schools / higher education

Job DescriptionBenefits: • Employee discounts, • Flexible schedule, • Flexible Scheduling, • Competitive Compensation Responsibilities: • Serve customers their meals and drinks in an efficient manner, • Communicate food orders to the kitchen staff, • Refill drinks, • Wipe down tables, chairs, and other surfaces, • Remove tablecloths and reset tables, • Remove dirty dishes, glasses, and silverware from tables, • Adhere to all health and safety rules and regulationsQualifications:, • Experience as a busser, barback, food runner, or similar position is preferred, • Familiarity with food safety guidelines, • Ability to work in a fast-paced environment, • Ability to stand for long periods and lift up to 30 pounds, • Friendly and outgoing personality, • Availability to work evening and weekend shifts

Job Description We’re hiring people to join our team as DISHWASHERS! Dishwasher experience in a full-service, high-volume environment is required. A Few of Our Dish Team Benefits: • Restaurant Discounts, • Employee Assistance Program - Focusing on a Commitment to Mental Health & Wellness, • Paid Vacation for Qualifying Employees, • Blue Cross Blue Shield Medical Insurance, • Dental & Vision Insurance, • Life, Accident Protection & Critical Illness Insurance, • Domestic Partner Benefits, • 401(k) Antico Posto is an Italian cafe and wine bar located inside Oakbrook Center, serving lunch and dinner daily. House specialties include handmade pastas, gnocchi, ravioli, hot and cold antipasti, brick oven hand-stretched pizzas and house-churned gelato. Antico Posto’s wine list includes Italian, Californian and Washington varietals, and features more than 50 wines available by the glass and bottle. Antico Posto also has a private dining room and seasonal patio. Caring. Creative. Careers. Join the Lettuce Entertain You team! Our 100+ restaurants are nationally recognized for great food and service and as great places to work. We hire and care deeply for people with creativity, passion and the drive to be the best. And we reward our teams with top notch benefits, career-long training and development and opportunities for growth. If you want a career at a progressive company with a long-standing commitment to people, join our caring and creative team. EOE. We participate in E-Verify / Participamos en E-Verify DISHWASHER JOB DESCRIPTION Dishwashers are responsible for washing and sanitizing all food service utensils and miscellaneous items such as plates, silverware, glassware, pots, pans, etc. Also responsible for assisting in maintaining the cleanliness of the back of house area. May have additional cleaning duties specific to the restaurant. Essential Functions • Operate and utilize the dish machine and cleaning supplies, • Wash, sanitize and dry all kitchen utensils, equipment and other items placed in the dish area or as requested by Management and Staff, • Available to work a variety of hours, days and shifts, including weekends, • Safely and effectively use and operate all necessary tools and equipment, • Ability to effectively communicate in order to perform and follow job requirements in written and spoken direction, • Multitask calmly and effectively under pressure, • Work in a confined, crowded space of variable noise and temperature levels, • Able to move and lift up to 10 pounds, frequently move and/or lift up to 25 pounds, and occasionally move and/or lift up to 50 pounds, • Ability to stand and walk for an entire shift and move safely through all areas of the restaurant, which may include stairs, uneven or slick surfaces Key Responsibilities and Duties • Maintain a pace sufficient to prevent back up of dirty dishes, glasses, etc., • Return and restock all items to appropriate area after washing and sanitizing procedures are completed, • Ability to read a thermometer, • Maintain dishwashing machinery and communicate any potential issues to Management, • Identify cleaning supplies and notify Management when running low, • Assist with general cleanliness of the back of house and restrooms, • Empty garbage (checking for restaurant supplies) and keep garbage areas clean and covered, • Comply with all safety and sanitation guidelines and procedures, • Follow all rules, policies, procedures and conditions of employment, including those outlined in the Employee Handbook, • Get along well with others and be a team player, • Other duties will be assigned as needed

Job Description • We are hiring immediately for full time and part time DISHWASHER positions., • Location: AdventHealth Hinsdale - 120 North Oak Street, Hinsdale, IL 60521. Note: online applications accepted only., • Schedule: Full time and part time schedules. Days and hours may vary; rotating weekends and holidays. More details upon interview., • Requirement: No previous experience required., • Fixed Pay Rate: $17.00 per hour Make a difference in the lives of people, your community, and yourself. Join a culture of opportunity with Morrison Healthcare. Our careers are filled with purpose and empower you to transform healthcare experiences. Take a look for yourself! Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation’s largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare’s Best Places to Work since 2012. Job Summary Summary: Maintains dishes, pots, pans, trays, kitchen, work areas, equipment and utensils in orderly and sanitary condition. Essential Duties and Responsibilities: • Scrapes and rinses food from dirty dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Washes pots, pans and trays based on assigned procedures. Ensure complete cleanliness and sanitation., • Polishes silver using burnishing machine tumbler, chemical dip, buffing wheel and hand cloth depending on assigned equipment and procedures. Ensures complete cleanliness and sanitation., • Ensures compliance with outlined safety procedures., • Maintains temperatures and chemical levels as outlined by provided standards., • Keeps dish area orderly and in compliance with safety standards., • Sweeps and mops kitchen floors to ensure compliance with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it in designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Helps load and unload supplies and product., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace.

Job Description We’re hiring people to join our team as DISHWASHERS! A Few of Our Dish Team Benefits: • Restaurant Discounts, • Employee Assistance Program - Focusing on a Commitment to Mental Health & Wellness, • Paid Vacation for Qualifying Employees, • Blue Cross Blue Shield Medical Insurance, • Dental & Vision Insurance, • Life, Accident Protection & Critical Illness Insurance, • Domestic Partner Benefits, • 401(k) Located in Chicago’s bustling River North, Fulton Market and Streeterville neighborhoods, Ramen-san is a lively neighborhood noodle den and bar reminiscent of traditional ramen shops in Japan and features a half-dozen different bowls of ramen, blast-chilled beer and rare expressions of Japanese whisky. Open for lunch, dinner and late night, the menu also incorporates Asian-inspired offerings like traditional okonomiyaki on the weekends and Late Night Fried Rice daily after 10 PM. Caring. Creative. Careers. Join the Lettuce Entertain You team! Our 100+ restaurants are nationally recognized for great food and service and as great places to work. We hire and care deeply for people with creativity, passion and the drive to be the best. And we reward our teams with top notch benefits, career-long training and development and opportunities for growth. If you want a career at a progressive company with a long-standing commitment to people, join our caring and creative team. EOE. We participate in E-Verify / Participamos en E-Verify DISHWASHER JOB DESCRIPTION Dishwashers are responsible for washing and sanitizing all food service utensils and miscellaneous items such as plates, silverware, glassware, pots, pans, etc. Also responsible for assisting in maintaining the cleanliness of the back of house area. May have additional cleaning duties specific to the restaurant. Essential Functions • Operate and utilize the dish machine and cleaning supplies, • Wash, sanitize and dry all kitchen utensils, equipment and other items placed in the dish area or as requested by Management and Staff, • Available to work a variety of hours, days and shifts, including weekends, • Safely and effectively use and operate all necessary tools and equipment, • Ability to effectively communicate in order to perform and follow job requirements in written and spoken direction, • Multitask calmly and effectively under pressure, • Work in a confined, crowded space of variable noise and temperature levels, • Able to move and lift up to 10 pounds, frequently move and/or lift up to 25 pounds, and occasionally move and/or lift up to 50 pounds, • Ability to stand and walk for an entire shift and move safely through all areas of the restaurant, which may include stairs, uneven or slick surfaces Key Responsibilities and Duties • Maintain a pace sufficient to prevent back up of dirty dishes, glasses, etc., • Return and restock all items to appropriate area after washing and sanitizing procedures are completed, • Ability to read a thermometer, • Maintain dishwashing machinery and communicate any potential issues to Management, • Identify cleaning supplies and notify Management when running low, • Assist with general cleanliness of the back of house and restrooms, • Empty garbage (checking for restaurant supplies) and keep garbage areas clean and covered, • Comply with all safety and sanitation guidelines and procedures, • Follow all rules, policies, procedures and conditions of employment, including those outlined in the Employee Handbook, • Get along well with others and be a team player, • Other duties will be assigned as needed

Job DescriptionBenefits: • Employee discounts, • Flexible Scheduling, • Competitive Compensation Responsibilities • Remove food from plates, • Prerinse dishes, glasses, and tableware and load them into the dishwasher, • Unload dishwasher and put items away in proper areas, • Sweep and mop floors, • Monitor levels of detergent and cleaning supplies, • Follow all health and safety guidelines, • Participate in team meetings, • Perform other cleaning duties, as assignedQualifications, • Hard worker with a strong work ethic, • Positive attitude, • Attention to detail, • Ability to meet the physical demands of the job, including standing for long periods and bending repeatedly

Job Description Location: Illinois Institute of Technology • We are hiring immediately for a full time DISHWASHER position., • Address: Illinois Institute of Technology - 3201 South State Street, Chicago, IL 60616. Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary; some nights and weekends are included. More details upon interview., • Requirement: Previous dishwashing experience is required. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Maintains dishes, pots, pans, trays, kitchen, work areas, equipment and utensils in orderly and sanitary condition. Essential Duties and Responsibilities: • Scrapes and rinses food from dirty dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Washes pots, pans and trays based on assigned procedures. Ensure complete cleanliness and sanitation., • Polishes silver using burnishing machine tumbler, chemical dip, buffing wheel and hand cloth depending on assigned equipment and procedures. Ensures complete cleanliness and sanitation., • Ensures compliance with outlined safety procedures., • Maintains temperatures and chemical levels as outlined by provided standards., • Keeps dish area orderly and in compliance with safety standards., • Sweeps and mops kitchen floors to ensure compliance with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it in designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Helps load and unload supplies and product. We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company’s behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace.

Job Description Headquartered in Chicago, IL, Puttshack USA opened its first location in 2021 as an upscale, tech-infused mini golf experience that appeals to everyone. More than just indoor mini golf, Puttshack leans on its ground-breaking technology to elevate the game while also serving world-class food and full bar in a cool environment. The Puttshack experience is really all about having fun – and doing something fun – together. Position Summary: Puttshack is looking to attract a diverse team of fun hospitality associates who care deeply about creating an elevated, one-of-a-kind guest experience. The Server Assistant position is an essential part of the floor operation. It is the Server Assistant’s responsibility to get the food and drinks to guests in a timely manner, as well as cleaning, sanitizing, and resetting tables and golf courses. Server Assistants assist the service team in exceeding guest expectations by providing friendly and caring guest service. Teamwork, organization, and strong awareness while multi-tasking is a recipe for success in this position. Schedule/Hours: Our venues are open 7 days/week, typically from 11am-1am with some variations. While we will do our best to accommodate scheduling preferences, they may not always be guaranteed, and we value flexibility. All positions within our venue are variable schedules, meaning a typical work schedule may be anywhere between 15 and 30 hours on a weekly basis depending on business needs and individual availability. Position Responsibilities may include, but not limited to: • Bring your 'A' Game each and every day., • Anticipate guests’ needs and ensure overall experience exceeds expectations, • Greet guests with a warm welcome and sincere smile, • Assist service team with all food and beverage service, • Deliver food and drinks to guests in the dining room, bar, and golf courses following steps of service, • Clean and transport dirty dishes to tray or dish room, • Quickly and efficiently clean, sanitize, and reset tables, • Stock and maintain supplies at service stations, • Understand and follow food allergy procedures and special orders/restrictions, • Comply with all safety and sanitation guidelines and procedures, • Take direction and be a team player, • Follow all rules, policies, procedures, and conditions of employment, including those outlined in the Associate Handbook, • Must be 18+ years of age to apply, • Prior hospitality or food/beverage experience, • Strong level of emotional intelligence and overall self-awareness, • High standards of guest satisfaction, • Ability to obtain any required licenses and certifications for your location, • Experience safely and effectively transporting food and beverage, • Sense of urgency and ability to multitask calmly and effectively in a busy environment, • Ability to stand and walk for an entire shift and move safely through all areas of the venue, which may include stairs, uneven or slick surfaces, • Ability to move and lift up to 10 pounds frequently, and occasionally move and lift up to 30 pounds., • Competitive pay, • Health/dental/vision coverage, • 401(k) matching, • Life Insurance, • PTO, • Associate discounts - FREE mini golf and 50% off meals Other rewards may include tips, discretionary bonuses, etc. Benefits eligibility and offerings may vary by location or position. Some of the above benefits are immediately available to our part-time or variable time associates, whereas others become available after completing initial employment periods. Please consult with the hiring team for more details. This role is paid a base wage plus tips. Total hourly rate cannot be guaranteed. The advertised pay is an estimate and may vary based on schedule & availability. At the intersection of entertainment and hospitality, Puttshack is committed to equal opportunity and is firmly committed to preventing discrimination and harassment, including sexual misconduct, based on legally protected diversity characteristics (such as race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity or expression, family status, citizenship, genetic information, and veteran status) in its application and hiring processes and in its employment decisions.

Job Description POSITION PURPOSE: Responsible for the overall cleanliness of assigned rooms/suites cleaned in compliance with all Five Star service standards. Reports maintenance deficiencies in order to maintain rooms/suites in compliance with standards. EXAMPLE OF DUTIES: ESSENTIAL FUNCTIONS * Check cart for supplies, stock as needed, keep cart clean and organized. * Greet guests immediately with friendly/sincere acknowledgement. * Strip dirty linens towels as needed and remove used amenities from the room/suite. Clean room/suite, as assigned, which includes making beds, cleaning bathrooms, dusting, vacuuming and washing windows / tracks. Reports rooms as clean and available. Reports maintenance deficiencies in order to maintain the room in compliance with hotel standards. * Replenish linen and guest amenities. * Respond to special requests by guests (such as providing extra amenities or service time requests). * Ensures proper use of inventory and supplies. * Reports any missing, damaged or maintenance issues in rooms immediately. * Communicates any guest issues and feedback to the management team to ensure appropriate actions are taken. * Complies with and ensures compliance with security procedures. * Other duties as assigned. SUPPORTIVE FUNCTIONS: In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the supervisor based upon the particular requirements of the company. * Provide customer service to guests, including information about hotel services, activities and local attractions. * Assist co-workers and possibly train new hires, as requested. * Other duties as assigned. PHYSICAL REQUIREMENTS: • Must be able to understand normal conversation and accurately communicate information., • Ability to stand and walk on paved, unpaved, uneven and sometimes slippery surfaces for extended periods of time., • Must be able to climb stairs frequently., • Ability to remain balanced; Stoop, squat, kneel, crouch, twist, turn, and reach down, forward and overhead repetitively., • Must be able to use general cleaning supplies; Manual dexterity to grasp, lift, push, pull and use cleaning equipment and hand-held radio., • Must be able to push, pull, and control housekeeping cart and/or similar items on inclines and declines., • Ability to lift and carry up to 50 pounds occasionally., • Must be able to operate a computer. SPECIFIC JOB KNOWLEDGE, SKILL AND ABILITY The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation. * Ability to arrive at work on time and when scheduled. * Physically able to move large objects such as: carts, large bags of linen, ironing boards. * Physically able to operate cleaning equipment such as: vacuum cleaners, brooms, spray bottles. * Ability to learn, follow and practice standards for cleanliness. * Ability to follow all safety procedures/standards and able to recognize and act in emergency situations. * Ability to communicate effectively and pleasantly in English with guests and staff as necessary to effectively work within the department. * Ability to grasp, lift, carry or otherwise move materials weighing up to 50 lbs. * Ability to move throughout, building, bend, stop and reach on a continuous basis up to an 8-hour shift. EDUCATION High School graduate or equivalent required. EXPERIENCE 6 months to 1 year cleaning experience in housekeeping or janitorial services preferred. LICENSES OR CERTIFICATES None GROOMING All employees must maintain a neat, clean and well-groomed appearance. Specific uniform guidelines and/or required articles of clothing will be explained to you as a part of the orientation process. OTHER Additional language ability is strongly preferred. BENEFITS: At Trump International Hotel and Tower Chicago, we offer a range of employment benefits for this Non-Full Time position, subject to any applicable eligibility, enrollment and/or benefit plan requirements. An overview of the benefits offered can be found on the Hotel's Career Center webpage here: Click Here. E-VERIFY: Trump International Hotel and Tower Chicago participates in the federal E-Verify program, an electronic system that verifies employment authorization in the United States by comparing information from an employee’s Form I-9, Employment Eligibility Verification, with government databases. The company uses E-Verify only after an employee has accepted a job offer and completed the Form I-9. The company does not use E-Verify to pre-screen job applicants or candidates who have not received a job offer from the company. Equal Opportunity Employer We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law.

Job Description Position Summary: Responsible for setting and cleaning tables, sushi bar and lounge areas throughout the shift. Supports servers and service staff with drink refills and clearing tables. Assists with the setup of large parties and communicating which areas of the restaurant are ready to be seated to ensure customer satisfaction. Essential Functions and Responsibilities: • Maintains cleanliness and sanitation of the front of the house including all tables, chairs, and floors., • Maintains cleanliness and organization of service and bus station(s). Refills soy bottles and keeps them thoroughly cleaned prior, during and after shift., • Communicates and assists hosts to set up and break down tables as customer requests are received., • Refills soda, ice teas, and waters upon the request of the customer or server., • Removes dirty dishes, silverware and any debris from tables between courses and after customer leaves table. Returns dirty dishes, silverware, and glassware carefully to dishwashing and/or bar area., • Checks restrooms on a routine schedule to maintain cleanliness. Reports any restroom problems to management immediately., • Assists with spills throughout the restaurant to assure customer safety., • Leaves restaurant in a clean condition prior to end of shift., • Assists customers with inquiries or as needed., • Removes trash and breaks down boxes for the bar and restaurant., • Previous bar and/or restaurant experience preferred but not required., • Must have a High School diploma or GED., • Must be eligible to work in the United States. We use eVerify to confirm U.S. Employment eligibility.

Job Description We are looking for a Server Assistant to join the team at ROOP. You will be trained to be both a busser and a runner and will get a mix of shifts in those roles. Job Duties Include: • Delivering food orders from the kitchen to guest tables rapidly and accurately, • Making sure all plates are consistently plated and garnished and alerting chefs of any issues., • Assisting in bussing tables and clearing plates, • Greeting and pouring water for guests when they arrive and throughout their dinner., • Table Maintenance throughout their dinner making sure we are picking up dirty plates and keeping the table clean immaculate, • Switching plates and silverware between appetizers and entrees and dessert., • Communicating food orders to chefs, paying attention to priorities (e.g. food allergies), • Explaining the food to guests as you deliver it, • Being knowledgabale about the food in order to answer any questions the guest may have, • Maintaining a calm and friendly attitude at all times, • Must be physically able to exert up to 50 pounds of force occasionally; exert up to 20 pounds of force frequently; and exert up to 10 pounds of force constantly to move objects.

Job Description Position Summary: We are seeking an experienced and versatile 2nd Shift Machine Shop Supervisor to lead our 2nd shift in a fast-paced job shop environment. This is a working supervisor position meaning you'll not only manage workflow and personnel but also actively run machines and contribute directly to production. The ideal candidate is a hands-on leader who thrives on solving problems, managing shifting priorities, and keeping jobs moving. Key Responsibilities: • Supervise and coordinate the daily activities of 2nd shift machine shop personnel., • Assign and schedule jobs based on priority, machine availability, and workforce skill sets., • Set up and operate CNC and/or manual machines as needed to support production goals., • Set-up, program (Fusion 360), and operate CNC equipment, including Hurco 5-axis, Hurco 3 & 4-axis, Hurco TMM10, G&L, Haas, and more, • Occasionally work with manual mills and lathes Bullard VTL experience is a plus, • Ensure adherence to job travelers, blueprints, and customer specifications., • Monitor work progress and provide direction or technical support to machinists as needed., • Ensure quality standards are met by performing in-process inspections and coaching employees., • Troubleshoot machining and process issues to reduce downtime and scrap., • Maintain a safe, clean, and organized work environment in compliance with safety regulations., • Train and mentor machinists, including new hires., • Communicate effectively with first shift, engineering, quality, and management teams., • Maintain accurate production and timekeeping records., • Participate in continuous improvement initiatives and problem-solving efforts., • High school diploma or GED required; technical/vocational training in machining preferred., • Minimum 5 years of machining experience in a job shop or high-mix/low-volume environment., • Prior leadership or supervisory experience preferred but not required if youve led by example on the floor., • Proficient with a range of machines (CNC mills/lathes, manual equipment, etc.)., • Strong CAM programming experience (5+ years, Fusion 360 preferred), • Skilled in blueprint reading, GD&T, and use of precision measuring instruments., • Strong troubleshooting skills and ability to shift gears quickly., • Must be organized, self-directed, and capable of managing multiple priorities., • Willing to get hands dirty, jump in when help is needed, and lead by example., • Familiarity with ERP/job tracking systems is a plus., • Effective communicator with a hands-on, team-oriented leadership style.

Job DescriptionJob Title: Production Supervisor Job Description As a Production Supervisor, you will oversee the training and supervision of production and packaging associates. You will be responsible for coordinating and monitoring production procedures, reporting and understanding scrap levels, and addressing food safety and quality issues. Additionally, you will manage scheduling and disciplinary actions as needed. Responsibilities • Supervise and train production/packaging associates., • Coordinate and monitor production procedures., • Report and understand scrap levels., • Address food safety and quality issues when necessary., • Manage scheduling and handle disciplinary actions.Essential Skills, • Experience in production supervision and management., • Knowledge of GMP (Good Manufacturing Practices)., • Safety and lean manufacturing experience., • Process improvement skills., • Supervisory and management skills.Additional Skills & Qualifications, • 2+ years as a supervisor in a packaging/production environment., • Strong verbal and written communication skills., • Food/GMP experience.Why Work Here? This is a non-union position offering a direct hire placement. You will have the opportunity to work in a dynamic environment where your contributions are valued. Work Environment The position operates on a 3rd shift from 10 PM to 6 AM, working 5-6 days a week. Some areas of the facility may be hot and dirty. Job Type & Location This is a Permanent position based out of Chicago, IL. Pay and Benefits The pay range for this position is $65000.00 - $75000.00/yr. medical, Dental, Vision, 401k Workplace Type This is a fully onsite position in Chicago,IL. Application Deadline This position is anticipated to close on Nov 28, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: The Location Supervisor will be responsible for the set-up of all food and beverages for each meeting and event. This role will manage the receiving and timely setup of the daily meal orders for the conference rooms. In coordination with the client’s room reservation, ensure the set-up, maintenance, and cleanup of any beverages and snack breaks for individual conference rooms. The Location Supervisor will maintain the account’s operational efficiency by overseeing inventory levels and ordering supplies when necessary. Additionally, they are responsible for preparing Event Supervisors for success by ensuring they have all the necessary equipment and resources needed to execute events seamlessly. Overall, the Location Supervisor will play a critical role in ensuring the smooth and successful operation of the conference catering and events while upholding Blue Plate Catering's core values and brand integrity. Essential Functions: ? Receive & set up the daily breakfast and lunch orders onsite in the designated areas. ? Coordinate with the onsite team to ensure that all necessary equipment has been delivered to appropriate rooms in advance of meetings or events. Facilitate the return of used and/or dirty items to the appropriate locations for cleaning & storage. ? Create daily delivery schedules and equipment requests needed for events. ? Monitor all onsite inventory levels for the pantries, and any disposable items and supplies. Duties include ordering, receiving, and daily inventory of products. ? Ensure that all catering areas and/or pantries are cleaned after each use and that all relevant items are returned and secured in their designated location. ? Support Account Manager in the development and execution of Standard Operating Procedures. ? Ensure all food safety and sanitation standards are adhered to. ? Attend daily and/or weekly meetings as required by management. ? Performs other job-related tasks as directed. Job Requirements Education and Experience: The requirements listed below are representative of the knowledge, skill, and ability required. ? 2 Years of catering experience in a service or operations capacity is required. Experience in corporate events or conference services is a plus. ? Must be computer-literate. Any experience with CaterXpert or other catering software is a plus.. ? Illinois BASSET Certification or the ability to obtain certification within 30 days of hire is required. ? State and Local Sanitation Management Certification or the ability to obtain certification within 30 days of hire is required. ? High school diploma preferred. Essential Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. ? Ability to demonstrate a strong affinity for Blue Plate’s mission: Our mission is to “care more” for others through food and service experiences that turn our partner’s vision into reality. ? Ability to analyze, prioritize, and respond to requests with a sense of urgency from clients and managers. ? Ability to multi-task and adapt to changing expectations regularly. ? Ability to maintain composure and make sound decisions under pressure. ? Reliable and punctual attendance. ? Strong professional communication skills. ? Basic competency with Google Applications including Mail, Docs, and Sheet (or Microsoft Office equivalent) is preferred. Language Skills Ability to read, write, and speak English proficiently. Bilingual skills preferred. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Blue Plate is committed to providing reasonable accommodations to qualified individuals with disabilities in accordance with the American with Disabilities Act (ADA): Frequently required to stand, walk, sit, use hands to feel; reach with hand and arms, and stoop, kneel, or crouch. Constant standing throughout the shift is required. ? Regularly required to lift and/or move up to 60 lbs. ? Specific vision requirements include the ability to see at close range, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Blue Plate is committed to providing reasonable accommodations to qualified individuals with disabilities in accordance with the American with Disabilities Act (ADA): May work in extreme heat and cold (non-weather and weather). ? May work in wet conditions (non-weather and weather). ? The noise level is low to moderate. ? May work near toxic/caustic chemicals and with fumes or airborne particles. ? Will work near moving or mechanical parts. Compensation and Benefits Base Salary Range: $23.00 - $25.00/hr, based on experience and qualifications. • At Blue Plate Catering, we live our core value: We Care More. Our comprehensive benefits package reflects our commitment to supporting our team’s well-being and growth. Benefits include medical, dental, and vision insurance, a 401(k)-retirement plan, and paid time off (PTO) with sick leave. Blue Plate Catering complies with all applicable federal, state, and local laws governing non-discrimination in employment, including protections related to race, color, religion, sex (including sexual orientation, gender identity, or pregnancy), national origin, age, disability, or genetic information. Requirements:

Job Description About Us: At Clean Your Dirty Face, we believe the solution to clean, more radiant skin is through routine skincare. We are a team of skincare professionals and our goal is to deliver skincare education through an efficient, high-quality 30-minute facial. Do you love to take care of your skin and teach others to look and feel their best? Turn your passion into something rewarding by joining our team at Clean Your Dirty Face in Chicago, IL. About the Role: Clean Your Dirty Face (CYDF) Chicago is looking for an energetic and forward-thinking Studio Sales Manager who is responsible for the leadership and mentoring of the Front Desk Staff, Skin Boss Team (Licensed Esthetician) and Management teams. This individual oversees seamless operations of the business unit while adhering to budget and financial goals. Duties and Responsibilities: • Responsible for projecting a positive image within the studio, maintaining an atmosphere of cooperative teamwork that emphasizes guest service and satisfaction., • Inform staff of job responsibilities, performance expectations, guest service standards, and corporate policies and guidelines., • Able to perform, with a high level of excellence, all duties and responsibilities as required of the Front Desk team., • Provide top level guest service for all including internal guest service., • Lead by example in promoting services, add ons, membership, and retail, as well as special events, promotions and/or discounts available., • Establish and maintain open, collaborative relationships with employees and ensuring employees do the same within the team., • Reviews secret shop reports, guest survey results and other data to identify areas of improvement., • Consistently assess employee performance and provide constructive feedback to champion continued growth of team members., • Properly document and deliver appropriate corrective action as needed when employees are not performing to company standards and/or are in violation of company guidelines and policies., • Train staff in the use or sale of products, programming or services., • Check studio equipment to ensure proper functioning., • Coordinate schedules to maximize usage and efficiency., • Develop staff service or retail goals and guide staff in goal achievement., • Adhere to studio budgets and financial goals., • Inventory products and order new supplies., • Monitor operations to ensure compliance with applicable health, safety, or hygiene standards., • Perform accounting duties, such as recording daily cash flow, preparing bank deposits, or generating financial statements., • Monitor and prepare payroll for the whole team in coordination with Owner., • Work with the Owner to recruit, interview, and hire employees., • Respond to customer inquiries or complaints with urgency in a timely manner., • Schedule staff or supervise scheduling., • Verify staff credentials, such as educational and certification requirements ensuring all remain current., • Direct facility maintenance or repair., • Three (3) plus years of hands-on spa/skincare sales experience required, • Ability to travel to other Chicago studios at least 30% (includes some weekend travel) required, • Ability to support a flexible schedule, including weekends and evenings, • Proficiency with Microsoft Word, Gmail and Excel, • Experience with CYDF products & services are a plus!, • This position offers competitive base salary; based on experience + performance with an opportunity for performance-based bonus, • Paid Time Off, • Growth potential within the company, • Free Facials, Discount on products Salary: $50,000.00 - $60,000.00 per year with a competitive bonus program Schedule: • Tuesday to Saturday Job Type: Full-time Pay: $50,000.00 - $60,000.00 per year Benefits: • 401(k), • Employee discount, • Flexible schedule, • Paid time off Shift: • 8 hour shift, • Day shift Work Location: In person