Trabajos Engineering en Los Angeles, California - Page 15Crear alertas

Job Description We are looking for a passionate, enthusiastic Senior Electrical Engineer who enjoys being part of a tight-knit multidisciplinary team. Motivo is a project-based small business focused on mechanical and electrical system design and prototype builds with an emphasis on integrated electro-mechanical assemblies with embedded electronics. We develop products in diverse market segments including mobility/automotive, medical/health, robotics, and clean energy. Motivo specializes in taking concepts and designs through the conceptual and detailed engineering phases, solving complex engineering challenges along the way, and transitioning the initial concept/idea to a fully engineered solution. Motivo is a nimble, creative engineering organization with diverse opportunities for growth where each employee gets to experience a wide variety of fast paced projects. We are passionate about our work and strive for excellence within each project's unique constraints. We work on challenging, fast-paced projects and we have fun doing it! Requirements The ideal candidate will exhibit most of the following: • Six plus years of professional engineering experience, • Direct technical involvement on multiple prior electro-mechanical projects with embedded electronics resulting in deep understanding of motion / control systems theory and physics, • Exceptional communication skills; able to present results and recommendations to internal and external customers, • Strong ability to mentor less experienced colleagues, • Desired work split: ~80% hands-on engineering and ~20% mentoring/similar, • Design experience with motors, motor controllers, power supplies, inverters / converters, and/or power electronics, • Prior professional experience with embedded electronics design containing microcontrollers, DSPs, programmable logic devices (FPGA, CPLD), memory, high speed signaling, MEMS sensors, etc, • Strong ability to handle concurrent fast-paced projects with minimal direction, • Development and editing of top level system architectures, • Experience with a plethora of different sensor types and technologies, • Programming experience especially with embedded C, real time operating systems (RTOS), and/or Matlab Simulink Coder (formerly Real-Time Workshop), • Familiarity with communication protocols like Controller Area Network (CAN), USB, SPI, I2C, Ethernet, etc, • Electrical test and debug with industry standard tools (oscilloscope, in-circuit debug, digital multimeter, etc), • Custom PCB design experience from schematic entry and board layout through fabrication, assembly, and test, • Familiarity and experience with high performance vehicles (electric vehicles (EV), hybrid electric, race vehicles, Solar Car, Formula SAE, etc) including the design process and components, • Experience in design and fabrication for automotive environments (extreme temperature, shock, vibration, etc), • Generate technical drawings of systems, components, and interfaces, • Experience with various battery chemistries and related battery management systems We’re convinced that the team and projects are hands down the best part of working at Motivo, but we also have some pretty sweet benefits including company-wide profit sharing, high-quality insurance plans, 401k match, generous paid vacation time, a Monday-Thursday 4/10 work week and more! Base Salary Range: $110,000 - $130,000 Annual Profit Sharing estimate: $5,500 - $19,500 Salary is dependent on experience, knowledge, and interview performance.

Job Description Motivo is looking for diverse Mechatronics Engineers to join our team as we work on some of the most interesting challenges in a variety of domains. Who are we? We are a relatively small group of engineers, fabricators and technicians taking on the latest and most high-tech challenges we can get our hands on. Our reputation in the start-up world is that of a bolt-on product development and engineering team that can help make dreams reality. We are the magic behind some of the fastest growing EV companies, robotics developers, and aerospace R&D programs. What’s it like? An engineering role at Motivo means broad ownership and education. There are no “cogs in the machine” here. You’ll be responsible for ideation and feature definition, system level design, client and vendor relationships, and hands-on hardware bring-ups. You’ll have a seat at the table with CEOs/CTOs and have a voice to contribute to product strategy and viability. We are a premium engineering consultancy and our clients’ success depends on you being involved and shaping the big picture. We’re convinced that the team and projects are hands down the best part of working at Motivo, but we also have some pretty sweet benefits including company-wide profit sharing, high-quality insurance plans, 401k match, generous paid vacation time, a Monday-Thursday 4/10 work week and more! Base Salary Range: $80,000 - $100,000 Annual Profit Sharing estimate: $4,000 - $15,000 Salary is dependent on experience, knowledge, and interview performance. Requirements Success at Motivo is largely driven by hard-work, creativity, and collaboration. For mechatronics engineers, we expect baseline proficiency and/or professional experience within electrical, mechanical and/or software engineering. Within the electrical domain, your skillset may include hardware design (PCB, wire harness, electronic systems), hands-on skills (debugging, bench testing, soldering), and/or firmware development (C/C++, controls, test scripting, version control). In mechanical engineering, we want to see capabilities in mechanism design (planning, modeling, verification), hands-on skills (prototyping, fabrication, testing), and/or analysis (static, dynamic, thermal). Within software engineering, the best engineers will be able to write maintainable code that allows a system to perceive and interact with its environment (via embedded processor, PLC or computer system), interact with users (frontend development for mobile devices, local computers or web servers), or manage data on the backend (API dev, database management). Modeling and describing physical systems in mathematics and code is particularly useful in many robotics programs. In short, a successful mechatronics engineer at Motivo will be able to contribute meaningfully within at least two engineering disciplines. Everyone has a mix of experience, which we value, but we tend to look closely for people that get excited to learn new things and expand their skillset.

Job DescriptionAbout Epirus Epirus is a high-growth technology company developing software-defined high-power microwave (HPM) systems with devastating counter-electronics effects on modern drone threats. The Epirus Leonidas HPM family of products, empowered by innovations in AI and microelectronics, is human-safe and cost-effective. Distinguishing itself from lasers, Leonidas excels against drone swarms while also bending the cost curve back in DoD's favor - taking drone defeat costs from millions of dollars per drone to pennies on the dollar. Job Summary: This is an exciting role in a growing company. We are looking for interns to join us on a 10-week internship program. This will be a hands on and in-person position. Basic Qualifications: • Pursuing a Bachelors degree in Electrical Engineering, Computer Engineering, or any related field, • Rising senior or beyond at time of internship and have a graduation date between 12/2026 - 12/2027. All applicants should be returning to school at the end of their internship to continue their academic studies., • Prior internship, collegiate project team, or laboratory experience, • Experience with Python, • Experience with electrical test equipment (Multimeters, Power Supplies, Function Generators, Oscilloscopes, Electronic Loads, etc.), • U.S. Person status is required as this position needs to access export-controlled data ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $36—$38 USD

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Power Electronics Engineer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge power electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for power electronics circuits and systems through all stages of the development process. The two primary product areas for this position are: (1) optimized point-of-load converters for RF and digital modules (typically ranging from 1W to 50W), and (2) standalone dc-dc converter modules (typically 20W to 500W). Design elements and responsibilities will include isolated and non-isolated DC-DC converters, maximum power point tracking solar power converters, magnetics design and analysis, system-level power management and distribution design, point-of-load regulators, switching and linear regulators, filters, and stability analysis and measurement. As a principal engineer on the hardware team, you will be responsible for hardware designs from concept through production, including product roadmaps, block diagrams, part selection, schematic design, PCB layout and routing, analysis, manufacturing (working with contract manufacturers), test, qualification, and in-orbit support. Principal engineers also serve as technical and professional mentors in their field. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering from an accredited university., • 9 years of industry or university research experience in power electronics design, analysis, test, and troubleshooting., • Extensive industry experience designing successful power electronics products from concept through schematic, layout, manufacturing, test, and deployment., • Experience designing power system architectures., • Expertise in power circuit analysis, such as worst-case circuit analysis, failure method effectivity and criticality, and reliability., • Expert-level proficiency in electronics design (EDA) tools such as Altium., • Expert-level proficiency in PCB layout for power circuits., • Experience with SPICE-based circuit simulation., • Experience with power integrity simulation tools such as Ansys or ADS., • Extensive hands-on experience with lab instruments such as oscilloscopes, spectrum analyzers, electronic loads, and signal generators., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with space electronics design, development, and qualification.

Job Description Infrastructure Engineer – Help Build the Backbone of Next-Generation Systems! El Segundo, CA | Hybrid (M/TH in-person) Opportunity Summary Join a venture-backed startup redefining how complex machines are tested, scaled, and operated. Our platform is purpose-built to give engineers real-time observability into high-frequency data streams, eliminating bottlenecks and enabling faster, more reliable development cycles. As one of the first infrastructure engineers, you’ll do more than write code; you’ll architect and evolve the foundation of a system designed for mission-critical applications. This role is ideal for someone who thrives in the ambiguity of early-stage startups, takes ownership, and wants to leave a lasting mark on both technology and company culture. You’ll tackle complex technical challenges, collaborate with world-class engineers, and help create the tools and frameworks that power cutting-edge development. About Us We are a fast-growing startup founded by engineers with experience at top aerospace, big tech, and enterprise software companies. Our team builds the underlying infrastructure that enables modern machines, whether terrestrial or orbital, to perform reliably at scale. With a culture rooted in technical excellence, iteration, and collaboration, we are dedicated to solving some of the most challenging problems in engineering observability and distributed systems. Job Duties • Architect, build, and scale reliable infrastructure solutions to support a growing platform and expanding customer needs., • Partner with software engineers to ensure high performance, fault tolerance, and seamless deployments., • Design and implement monitoring, alerting, and logging systems for proactive issue detection and resolution., • Drive automation of deployment workflows using modern DevOps practices and tooling., • Continuously evolve backend infrastructure for cloud and on-premises environments., • Lead efforts to improve infrastructure cost efficiency, reliability, and scalability., • Influence product roadmap decisions to align infrastructure development with customer impact., • Champion best practices for distributed systems design and operations. Qualifications • Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, or a related field., • 7+ years of professional experience in distributed systems, cloud environments, or platform engineering., • Proficiency with at least one major cloud provider (AWS, GCP, or Azure)., • Strong knowledge of containerization and orchestration (Docker, Kubernetes)., • Experience building and maintaining CI/CD pipelines and working with version control systems., • Familiarity with automated testing, integration, and end-to-end performance testing., • Solid understanding of networking, multi-cloud service architecture, and on-premises infrastructure., • Comfortable operating in a high-ownership, fast-moving startup environment. Preferred Experience • Hands-on experience with modern infrastructure stacks such as Go, Java, React, TypeScript, Kafka/Redpanda, Flink, and Terraform/CDK., • Exposure to observability frameworks and monitoring tools (Grafana, Prometheus, Argo CD, etc.)., • Familiarity with data frameworks (Arrow, DataFusion, Parquet, Rust)., • Ability to design for multi-region, multi-cloud architectures., • Passion for building developer productivity tools and frameworks that accelerate engineering velocity. Why Join Us • Be part of an early-stage, high-impact startup where your work directly shapes the product and company culture., • Tackle complex, meaningful engineering problems with global applications., • Collaborative, high-energy team culture with strong technical backgrounds., • Opportunity for rapid growth and career development, • Flexible work environment, • Strong PTO and holiday policies, • Medical, dental, and vision benefits, • 401k retirement plan, • Equity options Compensation Details $160,000 - $210,000

Job Description Motivo is looking for high caliber Electrical Engineers to join our project teams as we develop world-changing technologies. Who are we? We are a relatively small group of engineers, fabricators and technicians taking on the latest and most high-tech challenges we can get our hands on. Our reputation in the start-up world is that of a bolt-on product development and engineering team that can help make dreams reality. We are the magic behind some of the fastest growing EV companies, robotics developers, and aerospace R&D. What’s it like? An engineering role at Motivo means broad ownership and education. There are no "cogs in the machine" here. You’ll be responsible for ideation and feature definition, system level design, client and vendor relationships, and hands-on hardware bring-ups. You’ll have a seat at the table with CEOs/CTOs and have a voice to contribute to product strategy and viability. We are a premium engineering consultancy and our clients’ success depends on you actually being involved in shaping the big picture. We’re convinced that the team and projects are hands down the best part of working at Motivo, but we also have some pretty sweet benefits including company-wide profit sharing, high-quality insurance plans, 401k match, generous paid vacation time, a Monday-Thursday 4/10 work week and more! Base Salary Range: $80,000 - $110,000 Annual Profit Sharing estimate: $4,000 - $16,500 Salary is dependent on experience, knowledge, and interview performance. Requirements Success at Motivo is largely driven by hard-work, creativity, and collaboration. But some baseline experience we’re looking for involves hardware design (PCB, wire harness, electronic systems), hands-on skills (debugging, bench testing, soldering), and firmware/software development (C/C++, test scripting, version control). Everyone has a mix of experience, which we value, but we tend to look closely for people that get excited to learn new things and expand their skillset. Show us what you’ve got and let’s talk! K-means clustering of recent projects suggests these keywords might help us find you: custom electronics, electrical/electronic/control systems, prototyping, wireless communication, power conversion, machine vision, sensors/perception, motor/motion control, optics, robots/robotics/automation, controls, SAE

Job Description Location: San Jose, CA; Bakersfield, CA; Chico, CA; or Torrance, CA Employment Type: Full Time (Project-Based) Estimated Duration: 6–9 months with strong potential for multi-year renewal About the Role: Join us as an Electrical Engineer and play a critical role in advancing water infrastructure projects that directly support communities across California. This is a project-based position with an initial 6–9 month engagement, and because of the ongoing need for electrical expertise, there is a strong likelihood of renewal or long-term continuation for successful performers. You’ll contribute to the planning, design, and management of electrical and control systems for water facilities, ensuring compliance with the National Electrical Code (NEC) while delivering innovative, safe, and reliable solutions. This is a chance to make an impact on critical infrastructure while building your career in a highly respected industry. Why Join Us? At Innovation Consulting LLC, we go beyond technical expertise — we bring emotional intelligence, efficiency, and innovation into everything we do. You’ll benefit from: • Immediate eligibility for benefits — including medical, dental, vision, retirement plan, and paid time off., • A 401K program with a dollar-for-dollar match up to 6%, plus discretionary supplemental match., • A Health Reimbursement Account (HRA) that often fully covers healthcare premiums., • A 9/80 work schedule, giving you every other Friday off., • The chance to contribute to meaningful projects that strengthen California’s water systems and directly benefit communities. This isn’t just a temporary role — it’s a pathway to multi-year engagement on projects that matter. Key Responsibilities: • Prepare construction drawings and technical specifications for water facility electrical systems., • Perform engineering calculations: short circuit current, arc flash studies, voltage drop, and breaker coordination., • Specify and procure major electrical equipment and develop bid packages., • Manage project scope, budgets, and schedules., • Liaise with contractors, consultants, agencies, and internal teams., • Provide construction management and field inspections., • Contribute to rate case filings, annual capital budgets, and technical reports., • Present project details to agencies, districts, and community groups. Work Model and On-Site Requirements: • On-Site in one of the four listed California offices (San Jose, Bakersfield, Chico, or Torrance), • Potential hybrid schedule for the right candidate, • Standard 9/80 work schedule (80 hours over 9 workdays, with every other Friday off)., • Travel to project sites, community meetings, and public presentations may be required. What We Are Looking For: • Bachelor’s degree in Electrical Engineering or equivalent relevant experience., • Minimum 2 years’ experience as an electrical engineer., • Experience with motor control center design, NEC compliance, and electrical construction practices., • Proficiency with AutoCAD and Microsoft Office., • Valid California Driver’s License., • California EIT certification or PE registration highly desirable. Preferred Attributes: • Experience in water utilities or process industries., • Strong analytical and problem-solving skills., • Ability to present technical information effectively in public forums., • Familiarity with regulatory compliance in the water industry. Compensation & Benefits: • San Jose Area: $130,000 – $170,000/year, • Bakersfield & Chico Areas: $110,000 – $153,000/year, • Comprehensive benefits package with no waiting period., • Vacation, sick time, and holidays that accrue immediately., • Employee discount program on travel, memberships, and more. At Innovation Consulting LLC, you’ll be part of a team that believes in building a better world—starting with you. We’re committed to creating an environment where you feel valued, supported, empowered, and inspired to bring your unique talents to the table, driving positive change for our clients and communities. Join us, and you’ll have the opportunity to grow with a company that values diversity, ethical leadership, and sustainability, all while making a real impact in the world through our innovative and inclusive culture.

Job DescriptionCompany Description At Lakeshore, we create innovative learning materials and world-class guest experiences for teachers, parents and children. Since 1954, we’ve grown into a global community—with a thriving e-commerce business, multiple catalogs, 60 retail stores, a peerless national sales force, plus international offices that support our preeminent supply chain division. But today we’re working better, smarter and faster than ever—and setting our sights even higher. We’re building an infrastructure designed for scalability, embracing data-driven decision-making and using technology to improve efficiency and ensure the best tools for the best work. Most importantly, we continue to invest in a diverse team of inquisitive top talent who fuel each other’s passions and curiosity, take risks, try new things, and believe that every new day brings opportunities for growth. Job Description We are currently seeking a Sr. Quality Engineer to join our team. In this role, you will review product expectations and identify appropriate safety, reliability and durability testing as part of a comprehensive product test plan. The position also involves coaching and training our RD&D team on relevant testing standards to ensure alignment between product design and product performance requirements. Applicants should possess strong conceptual, analytical and problem-solving skills. The ideal candidate also has excellent communication skills, with the ability to clearly explain testing requirements and results to a broad and diverse audience. A day on the job looks like this: • Owning and developing product test plans (plastics/toys/soft goods), • Reviewing product expectations and identifying appropriate safety, reliability and durability testing as part of a comprehensive product test plan, • Creating and maintaining a library of test methods/protocols to ensure consistency and repeatability across in-house testing and third-party lab testing, • Presenting product test plans and test results to RD&D and Supply Chain to support informed product decisions, • Analyzing test results to evaluate product performance against defined requirements, • Identifying applicable industry standards for raw material and finished product testing, • Collaborating with the in-house lab manager to determine required testing capabilities, • Coaching and training RD&D on relevant testing standards to align product design with performance goals, • Participating in failure analysis and supporting baseline testing for product improvement projects, • Leading and/or supporting root cause analysis for customer service inquiries, • Collaborating with Product Integrity and Compliance teamsQualifications Got the skills and experience? Here’s what we’re looking for: • Bachelor’s degree in Engineering, Science or English, or quality management experience, • 5+ years of product engineering experience, • 3+ years of experience implementing quality engineering processes, • Ability to present technical data to diverse audiences at various levels, • Experience working with global teams, • Proven ability to develop customized testing protocols as needed, • Strong conceptual, analytical and problem-solving skills, • Ability to communicate complex testing requirements and results clearly and effectively, • Proven work experience in quality, engineering and testing standards, • Deep understanding of manufacturing processes, • Extensive knowledge of raw material processing and handling in global manufacturing environments, • Expertise in ASTM and other standard testing methods, with the ability to identify appropriate standards for each application, • Experience working with third-party testing labs, • Expert knowledge of regulatory requirements related to furniture, • Comfortable working with systems and performing data analysis, • Proficiency in MS Office, with strong skills in building and presenting reports, • Experience communicating through remote channels, such as video conferencing, email and text Additional Information And here’s our end of the bargain! At Lakeshore, we pay local market wages for employees that reside within Los Angeles and Orange Counties. For this position, new employees joining Lakeshore who live within Los Angeles and Orange Counties are typically brought into the organization at a salary rate between $98,000 - $137,500 depending on relevant experience & skillset. This range is indicative of projected hiring range. The annual base compensation will take into account each candidate's relevant experience, location, and skillset. • Bonus eligible, • Paid leave for new parents to support work/life balance and family bonding, • Excellent medical/dental and vision coverage—EPO, PPO and HSA, • 401(k) retirement plan with company contribution (because you will retire someday), • Flexible benefits—choose what you like, ignore the rest, • On-site preschool for our employees’ children, • On-site employee gym for all levels/fitness needs, • Generous employee discount We know we couldn’t do the extraordinary things we’re doing without the people on our team. Thanks to the passion and enthusiasm of this spectacular group, Lakeshore is more than a great place to work—it’s a great experience to be part of. Day in and day out, we give everything we’ve got to create products that instill a sense of wonder and foster a true love of learning. To help maintain this high bar for success, we’re constantly on the lookout for people to join us. So if you’re a down-to-earth professional who shares our desire for making a difference, we’d love to hear from you. To learn more about Lakeshore, visit Equal Employment Opportunity Policy People are selected to become members of the Lakeshore family based on skill, merit and mind-boggling talent—not based on race, color, creed, sexual orientation, gender or gender identity, marital status, domestic partnership status, military status, religion, age, national origin, ancestry, alienage, AIDS or AIDS-related complex status, genetic information, predisposition or carrier status, status as a victim of domestic violence, physical or mental disability, or any other characteristic protected by applicable law. If things aren’t equal, we all lose. To learn about how we collect and use Applicant information, please visit our Employee/Applicant Privacy Policy. Lakeshore is an E-Verify employer. We use E-Verify to confirm the employment eligibility of all newly hired employees. Please see the E-Verify Participation Poster and Know Your Rights Poster in English and Spanish for more information. INDRLL1

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer I to our Digital and Mixed-Signal Electronics team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack hardware development for complex modules. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of electronics modules, from concept and architecture through schematic, layout, test, and production, • Own the digital and mixed-signal portions of complex RF electronics, such as phased array control circuitry, • Design circuits with FPGAs, processors, microcontrollers, and other complex programmable targets, • Design mixed-signal electronics ranging from software-defined radios to telemetry subsystems, • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives, • Perform detailed PCB layout in Altium Designer for complex boards, sometimes working with a PCB Designer, • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, • Develop bring-up plans and design verification plans for new electronics modules, • Perform bring-up and key verification testing of modules, often working with a technician to complete validation, • Release modules to production, working with the Manufacturing and Test Engineering teams, • Mentor junior engineers to build technical understanding and professional development, • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modulesJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 4 years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of circuits or boards, including trade studies, key part selection, and detailed design., • Experience delivering subcircuit or board designs to production and deployment., • Experience performing complex PCB layout, such as high-density interconnect (HDI) and high-speed digital or power electronics., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Working knowledge of adjacent fields, such as software and mechanical., • Proficiency in electronics design tools such as Altium., • Strong lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE

Job Description Summary: Strategic Legal Practices (SLP), a forward-thinking law firm, is seeking a highly skilled and hands-on Salesforce Engineer to enhance and expand our Salesforce ecosystem. This role is not for administrators—we are looking for engineers who live in the code, with deep expertise in Apex, Flow, custom object design, and Salesforce cloud platforms. Candidates with architect-level experience, particularly in custom object integrations with tools like Formstack, Conga, and DocuSign, will receive top consideration. Compensation & Benefits $80,000 - $200,000 annually + benefits (healthcare, 401k, PTO, etc.) Key Responsibilities Salesforce Engineering & Development • Design and implement scalable, high-quality Salesforce solutions using Apex, Lightning Web Components, and Flow., • Own end-to-end configuration and development of custom objects, record types, automations, and integrations., • Leverage Experience Cloud to design and enhance secure, user-friendly client and partner portals., • Implement and support features in Service Cloud and Voice Cloud, such as:, • Case management, knowledge base, and automated workflows., • Lead integrations between Salesforce and third-party tools such as:, • Formstack, Conga Composer, DocuSign, and calendar/scheduling platforms., • Partner closely with IT, operations, and legal teams to translate business requirements into technical solutions., • Bachelor's degree in Computer Science, Information Systems, or a related technical field., • 5+ years of Salesforce development experience, not just admin experience., • Mastery of Apex, Flow, and Salesforce APIs., • Deep hands-on experience with:, • Experience Cloud, • Service Cloud, • Voice Cloud, • Custom object design and management, • Strong understanding of data modeling, security (roles, sharing, OWD), and testing., • Ability to work independently and thrive in a fast-paced legal-tech environment. Preferred / Bonus • Salesforce Certified Platform Developer I and II, • Salesforce Certified Experience Cloud Consultant, • Salesforce Certified Service Cloud Consultant, • Salesforce Certified Application Architect or System Architect, • Experience with legal operations or professional services is a plus We’re committed to supporting the well-being and success of our team through a robust and thoughtfully designed benefits package, including: • 401(k) with Employer Match – Plan for your future with confidence and company support., • Health, Dental, and Vision Insurance – Comprehensive coverage to keep you and your family healthy., • Short-Term, Long-Term Disability & Life Insurance – Financial protection for life’s unexpected events., • Paid Parking – Convenient and covered, so you can focus on your day., • Generous Paid Time Off – Ample time to rest, recharge, and take care of personal matters., • Employee Referral Program – Earn rewards for introducing talented individuals to our team., • Employee Assistance Program (EAP) – Confidential resources for personal and professional support., • Employee Discount Program – Access to exclusive savings on a variety of products and services.

Job Description Wisteria at Warner Center, located in Woodland Hills, California is seeking a Project Engineer. The Project Engineer oversees field work, manages project documents, reviews change orders, and supports budget tracking and invoicing. Wisteria at Warner Center will be a Life Plan Community, sometimes referred to as a Continuing Care Retirement Community (CCRC), which will have common areas including a clubhouse and 486 residences, as well as an adjacent health center. The successful candidate will be paid an extremely competitive base salary plus bonus and full benefits, including paid time off, 401k with guaranteed company match, and more. ESSENTIAL FUNCTIONS OF THE POSITION: • Field Management. Monitor work advancing in the field and ensure accuracy against all project documents and schedules. Develop familiarity with company design standards to track conformance in design & construction. Interact and collaborate with various general contractor, design, inspection, and management partners., • Document Management. Responsible for maintaining, organizing, and filing all project documents. Ability to interpret construction documents. Understand and support RFI, submittal, design change, and change order documents throughout the life of a project., • Contract Change Orders. Receive, organize, and understand all change orders. Assist the development team by performing an initial review of all change orders and report to project leadership. This may involve field walks to observe work in place, plan/spec and/or contract review to confirm a change order is warranted, reviewing old emails, etc. Facilitate a team change order meeting as needed to make final change order decisions., • Maintain Budget / Cost Projections / Invoicing. Perform a line-by-line monthly budget review with the project leadership and cost teams. Responsible for working with the cost team to receive and process all project invoices and payment applications., • Project Technology. Familiarity and proficiency with software such as Bluebeam, ACC, BIM360, Procore, Plangrid, and Microsoft Suite (Teams, Excel, Outlook, Sharepoint). This is a very useful communication tool to contractors, staff, and future residents., • Prior significant experience in Skilled Nursing, Senior Living, large Multi-Family facilities or similar commercial realm., • Associate or Bachelors Degree in construction management or related field or equivalent combination of training and significant experience, • Strong organizational, project management, scheduling and planning skills., • Strong written and verbal communication skills, • Computer proficient using Microsoft Word, Excel, Outlook, Blue Beam, Primavera, & Autodesk Cloud, • Analytical and mathematical skills, • Problem solving & technical skills for document, submittal & RFI reviews Must be able to sit at a desk for up to six hours per day; must be able to stoop, bend, stretch, and squat to access files and various documentation. Must be able to safely navigate a construction site walking, standing, climbing stairs & ladders, and occasionally maneuver through tight spaces while wearing proper PPE. Must be able to lift up to 35 lbs occasionally. When lifting over 35 lbs, you are required to ask for assistance. Occasionally push and/or pull wheeled carts and equipment generally weighing up to 200 lbs.

Job DescriptionWho we are Metropolis is an artificial intelligence company that uses computer vision technology to enable frictionless, checkout-free experiences in the real world. Today, we are reimagining parking to enable millions of consumers to just "drive in and drive out." We envision a future where people transact in the real world with a speed, ease and convenience that is unparalleled, even online. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working and playing remarkable - giving us back our most valuable asset, time. Who you are We are looking for a Staff Web Engineer to join our Customer Experience application development team and contribute to the next step function growth phase. As a member of the engineering team, you will have the opportunity to design and build systems and features from the ground-up, have a big role to play in defining the direction of our product and mentor other engineers. The ideal candidate will have a product-oriented mindset with a passion for technology and customer satisfaction. This engineer will play a critical role in the company's success by ensuring that software development efforts are aligned with customer needs and contribute to the company's overall growth and profitability. This is a unique opportunity to build an end-to-end mobility platform that supports high throughput locations, aviation, fleet management and other use cases impacting the everyday experience of millions of people. If you are energized by the mission to empower our customers to harness time through remarkable mobility products, this role is for you. We operate in a fast-paced, challenging, and fun environment! We work together as one team to deliver on our commitments. We challenge the status quo every day, internally and externally. What you'll do • Design, implement, and maintain frontend components that make up the Metropolis parking and mobility platform., • Lead the entire development lifecycle, from ideation and requirements through successful launch!, • Be a role model and mentor to both senior and junior engineers, fostering best practices in UI frameworks and component libraries., • Collaborate with product managers and designers to model and understand real world problems., • Moderate technical discussions, evaluate new techniques, and ensure our platform is constantly evolving and improving., • Leverage best practices in automation testing and deployment to enable rapid iteration and launch of new features., • Help build a culture where bugs and mistakes in production are treated as opportunities to improve the platform.What we're looking for, • MS or BS in Computer Science or equivalent work experience. Strong fundamental computer science skills., • 10+ years of software engineering experience. Advanced level knowledge of React and Typescript., • Experience with consuming RESTful APIs and iterating on them with backend engineers., • Proven track record of successfully designing and delivering large scale initiatives in high volume consumer facing applications., • Strong sense of system modeling and designing complex systems applicable to real world problems., • Deep understanding of Agile engineering processes that support the entire software development life cycle, including TDD/BDD, CI/CD and related build/test/deploy processes., • Excellent written and verbal communication skills with a proven ability to present complex technical information in a clear and concise manner to a variety of audiences., • Local to Santa Monica (Los Angeles), New York City, or Seattle areas While not required, these are a plus:, • Advanced knowledge of React and Typescript., • Work experience in innovative, high-growth environments Our Stack, • Languages + Frameworks: TypeScript, React, Scala (principally), Java (limited), • Datastores: MySQL, PostgreSQL, Snowflake, • Cloud: AWS, • Version control: Git & GitHub, • AI Tooling: Copilot on GitHub Metropolis values in-person collaboration to drive innovation, strengthen culture, and enhance the Member experience. Our corporate team members hold to our office-first model, which requires employees to be on-site at least four days a week, fostering organic interactions that spark creativity and connection Metropolis may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate's application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, Metropolis retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. Metropolis Technologies is an equal opportunity employer. We make all hiring decisions based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including gender identity, sexual orientation, or pregnancy), national origin, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Network Reliability Engineer Role The Network Reliability Engineer reports to the Manager of Network Reliability and is a member of CoreSite’s Network Engineering team. The primary function of the role will be to advance automation, scale, and next-generation initiatives within the company. The role will focus heavily on SDN, Cloud, and virtualization. The position will heavily focus on product improvements and automation. Candidate should have experience in at least one programming language and be willing to demonstrate this experience during the interview process. We don’t necessarily care if you have a computer science degree, but we do expect candidates to be able to demonstrate full understanding of fundamental programming concepts. Repetitive activities are boring and have to be eliminated. You will be part of a world-class engineering team that’s paving the path for new ways for enterprises to consume ever increasing cloud services. Duties • Train, mentor, and help develop the skills/capabilities of Network Reliability Engineers., • Be responsible for the quality of the customer experience in production and in the ideation, design, and development of next generation systems., • Partner with Engineering teams to measure, deliver, and improve both the engineering and customer experience., • Improve observability via implementation of improved monitoring, metrics, logging, and system analytics., • Build software and systems to manage services and applications through automation., • Practice network asset management, including maintenance of network components, inventory and related documentation and technical specifications information. Knowledge, Skills & Abilities • Track record of building and running high-performance teams., • Fundamental understanding of common API concepts and standards as well as aspects of data storage, service status and session handling, • “Fluent” in at least one programming language, and be willing to perform live coding exercises during the interview process, • Ability to work independently and manage multiple priorities, • Have familiarity with workloads within cloud-based ecosystem with at least one of the leading public cloud platforms (AWS/Azure/GCP), • Excels in a team-oriented work environment, • Excellent interpersonal, verbal, and written communication skills, • Exhibits a strong work ethic and accountability to deadlines Education/Experience • 6+ years’ experience as a Network Engineer in a service provider network environment that includes high end routing/switching network infrastructure, • Experience in Cloud interconnection, • Preferred experience in ISP and/or telecommunications companies, • Preferred experience with cloud computing architectures – IaaS, SaaS, etc., • Preferred CCNP certification or equivalent work experience, • Four-year college/trade education preferred or equivalent work experience Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for Cigna, • Healthcare and dependent care flexible spending account (FSA) plans, • Health saving account (HSA) plans for employees participating in the High Deductible Health Plan, • Life, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount, • 16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend, • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care, • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers, and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionAbout Nominal Nominal is building the software infrastructure that powers the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and helps engineering teams iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on solving challenges at the intersection of hardware and software. As a dual-use platform, we're serving top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by top-tier investors — Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — who share our mission to accelerate innovation in mission-critical systems. Our team brings experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies, united by a common goal: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. In this pivotal role, you'll bridge Nominal's software with real-world applications, becoming an indispensable advisor to our customers. You'll ensure our solutions not only meet but exceed operational requirements, tailoring deployments to unique environments, providing comprehensive training, and directly addressing any challenges that arise. Your work will transform customer operations, enhance user experiences, and drive Nominal's technology to new frontiers.\uD83D\uDE80 About the role • Deploy & Integrate: Take Nominal's tech to operation on the ground, tailoring solutions to fit our clients' high-stakes environments perfectly., • Build Relationships & Business: You're not just deploying technology; you're growing Nominal's presence and impact and establishing deep, productive partnerships. You’re acting as an account manager and product expert, and important relational and technical capital is on your shoulders., • Train & Support: You're on the front lines, making sure our users understand our products and can use them to their full potential., • Enhance & Evolve: Your feedback loops are gold, turning user experiences into actionable insights for continuous product improvement., • Solve & Streamline: See an issue? You're on it, with the autonomy to fix problems fast and keep our technology ahead of the curve., • Be the Bridge: You're the vital link between Nominal and our customers, translating needs into solutions and ensuring seamless collaboration across all fronts.\uD83D\uDD0D We're looking for someone with, • Proven Engineering Expertise: 4+ years of professional experience and have worked in the trenches of hardware engineering. You have firsthand experience in environments like propulsion test stands, satellite mission operations, or flight testing. Your resume says, "I've built and tested the future.", • Technical Sharpshooter: Your intellectual curiosity drives you to solve complex problems. You think in systems and see the big picture, yet you're all about nailing the details. You have a strong intuition for the math and physics our customers encounter daily., • Communicator & Influencer: You articulate complex ideas with ease and confidence, steering conversations and projects with clarity and honesty., • Dynamic Leader & Team Player: With a mix of humility, eagerness to learn, and empathy, you're a natural at leading and lifting those around you. You don't just spot problems; you solve them., • Project Maestro: You have a solid track record of turning technical concepts into reality and managing the full cycle from planning to deployment., • Ready to Roll: Up to 50% travel? No problem. You're ready to be where the action is, anywhere, anytime., • Must be eligible to obtain and maintain a U.S. TS Clearance⚡ Skills that supercharge us, • Customer-facing skills: Experienced consultant, customer success leader, and/or technical program manager, • In-Field Hardware Mastery: Proficiency with hardware engineering tools such as DAQs, DDS, Nix, RTOS, MCAP, H5, TDMS, LabVIEW, MATLAB/Simulink, and WinPlot., • Data Engineering Proficiency: Expertise in SQL, Python, Pandas, Influx, Grafana. Familiarity with Spark, Arrow, Kafka, Beam, and Flink.✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job Description About the Company What we do Gravity Media delivers an unparalleled range of media services and solutions to clients worldwide utilising outside broadcast trucks, fly-packs and studios spanning the United Kingdom, ROI, Europe, the Middle East, the United States and Australia offering market-leading broadcast, technology, production, and post-production solutions across many of the world’s most-watched live events and entertainment programmes. Our People We have a passion for problem solving and thoughtful innovation and recognise our collective differences play a huge role our success. Our teams are talented, passionate, dedicated, take pride in their work and support each other. We encourage applications from all backgrounds and are dedicated to attracting and developing talent, empowered through an inclusive culture. All suitably qualified applicants will be considered regardless of gender, race, sexual orientation, national origin, disability, religion, and age. Leadership Behaviours We hold high expectations of our leaders and managers who are responsible for driving the success of our people and the organisation. Our managers give clear communication, lead by example and feed back to foster growth and development of their team members. Management excellence is essential to the company’s success, and effective leadership requires a combination of interpersonal skills, strategic thinking, and a commitment to providing a positive and productive work environment. Commitment to Equality Gravity Media is an equal opportunity employer and we welcome a diverse range of applicants. All qualified applicants will receive consideration for employment without regard to any characteristic protected by law. If you need assistance or an accommodation during the application process because of a disability, it is available upon request. The company is pleased to provide such assistance, and no applicant will be penalized as a result of such a request. About the role Job title: Senior Broadcast Engineer A brief summary The Senior Broadcast Engineer role is responsible for supporting our live studio productions from Riot Games’ Los Angeles Studio. In this role, you will be responsible for executing operations and support of both traditional and IP/2110 broadcast tools to meet production needs. Your expertise is baseband routing, IP and SMPTE 2110 workflows, NDI workflows, Cisco Meraki programming, intercom, audio consoles, Dante networks, Switchers, EVS and graphic systems, will be crucial in delivering high value and exceptional quality for our internal production teams and customers at this facility. Our current workflows leverage both hardware-based infrastructure alongside software defined production tools for flexible technical solutions that push the boundaries of traditional Esports broadcasting to captivate and inspire fans worldwide. What you’ll be responsible for • Working with other Engineers and Technical Operations Technicians to provide studio support for in-studio and remote productions., • Working with Evertz Routers to manipulate audio and video signals using broadcast instruments and measurement tools to ensure desired outcome., • Maintain, troubleshoot, and repair broadcast/production hardware, systems and servers., • Heavy support of software defined broadcast tools and IP protocols as well as NDI networks., • Work varied schedules, including nights, weekends, and/or holidays., • Other job-related duties as assigned. In this management role we’ll be expecting you to: • Be the first point of contact for your team for any queries, escalations, and feedback., • Hold regular meetings with each member of your team to align on topics, direction, information sharing, create an opportunity for the team to be heard and sense of community., • Regularly review workload across the team to ensure efficiency and balance., • Provide feedback to your team to allow continued growth., • Ensure new members to your team have a thorough onboarding process including regular review during probation (excludes onboarding provided by HR)., • Actively support the development of your team through action plans., • Actively manage poor performance., • Communicate and reinforce key business messages to your team, for example following Manager Meetings, Town Halls, email communications., • Understand key Company policies/processes and help your team to understand., • Be responsive to requests for information to colleagues and other departments., • Ensure your team complete all mandatory training., • Carry out an annual performance review with each member of your team., • Take any necessary steps to ensure that individuals are not subjected to harassment, sexual harassment, or bullying. Required Qualifications • 6+ years of broadcast experience and/or an advanced degree., • Experience in Esports broadcasts., • Extensive knowledge of switchers, audio consoles, video routers, NDI workflows, EVS systems, intercom systems, Cisco Network and IP protocols, and transmission systems., • Operate, maintain, troubleshoot, and repair complex electronic, computer based, optical and mechanical broadcast systems., • Strong understanding of IP networks and 2110 workflows., • Strong understanding of NDI system and workflows., • Ability to provide constructive feedback around practices, tools and methods related to production, broadcast, and post-production., • Experience following engineering best practices within your team, including design reviews, standards implementation, automation reviews, tool improvements, source control management, and testing., • Ability to sit, reach outward or above the shoulder, stand, walk, handle with fingers, stand, bend and stoop., • Ability to operate a keyboard, view a video display terminal screen, ability to use telephone equipment., • CCNA level or equivalent experience level., • Cross Platform fluency, Familiarity with Lenux Mac and Windows systems, upgrading systems., • Dante network Audio flows., • NDI Knowledge., • SMPTE 2110 Knowledge., • IP and networking experience (this role is heavy on IP system experience)., • Encoding and decoding., • Ability to work side by side with production., • Familiarity with live event production in a broadcast team environment., • Knowledge of streaming, OTT technologies, protocols and monitoring., • Outstanding technical problem solving and critical thinking skills., • Experience working on a team supporting large, interconnected broadcast systems and designing scalable, production-ready architecture.

Job DescriptionDescription: Project Architect – Bring Vision to Life, Design with Purpose • Location: Los Angeles, • Full-Time - Exempt, • Salary: Architect III - $104,000 - $122,300 Who We’re Looking For Must have experience working with LAUSD design standards and DSA plan check requirements and processes Are you ready to take your architectural career to the next level? Do you see design as a powerful tool for storytelling, community impact, and innovation? We’re seeking an Architect III who blends technical proficiency with a designer’s soul—someone who’s eager to contribute bold ideas, drive thoughtful solutions, and help turn visionary concepts into meaningful, built environments. This is your opportunity to join a collaborative team of creatives where your work truly makes a difference. What You’ll Do – Your Design in Action • Design Forward – Contribute innovative design ideas that reflect context, creativity, and client vision., • Lead the Details – Independently produce high-quality drawings, specifications, and materials selections., • Collaborate Creatively – Work alongside clients, consultants, and internal teams to ensure seamless, inspired outcomes., • Problem Solve with Purpose – Apply your judgment to evaluate and implement architectural solutions for projects of medium to large complexity., • Administer with Intent – Conduct construction site visits, review RFIs/submittals, and support project follow-through., • Balance & Budget – Stay aligned with project schedules, budgets, and quality expectations., • Support the Vision – Ensure documents and deliverables reflect both design excellence and technical precision. Requirements: Competencies • Design Tools: Proficiency in Revit required; Adobe Creative Suite (Photoshop, Illustrator, InDesign) proficiency required; SketchUp or Rhino required; Lumion, Enscape and V-Ray are a plus., • Technical Know-How: Strong working knowledge of zoning and building codes, specifications, building/engineering systems, and agency requirements (NFPA, ADAAG, FGI, OBC, IBC etc)., • Creative Confidence: Ability to generate and articulate impactful design ideas., • Strong Communicator: Outstanding verbal and written communication skills., • Detail-Driven: Organized and efficient with a focus on quality, timelines, and collaboration., • Client Focused: Passion for providing exceptional client service., • Team Player: Collaborative and professional work ethic.Essential Functions, • Licensed Architect who works independently and is responsible for finished plans, specifications and approval of materials and construction, • Participates in the conceptual design and provides full support through the entire project, • Coordinates on the planning and development of construction and design document production, and provide technical expertise to ensure coordinated and high-quality documents, • Responsible to conduct construction administration duties, such as site visits, RFI responses, submittals, and punch list reviews, • Liaises with Project Management, other architects, and consultants, • Develops and represents lead technical viewpoint on projects, • Involve explorations of subject area, definition of scope, selection of items for investigation and development of novel concepts and methods, • Participates in preparing reports and specifications. Reviews completed reports, plans, estimates and calculations, • Responsible to follow project budget, task schedule, and other components of the work plan with Project Manager, • Responsible to monitor personal billing and works at maximizing team’s quality and efficiency in assigned tasks, • Responsible to coordinate with clients, project team, consultants, and contractors to ensure trust and confidence, • Provide leadership and oversight of a team of project architects, project associates and interns, • Provide leadership for client meetings, • Assists in analyses of design, design data, and planning as it relates to project scope, • Contribute innovative design solutions that consistently capture the intended design vision, • Contribute to bold design solutions that balance scale, aesthetics, and context to maximize the impact to the individual and community, • May participate in marketing efforts and lead presentations to prospective clientsYour Background – The Foundation of Your Success, • Education: Bachelor’s or Master’s degree in Architecture from an accredited university (preferred)., • Experience: Minimum 8 years of architecture-related experience in a professional setting., • Travel: Occasional project-related travel required.Why Join Us?, • Culture of Creativity – Work in an open, collaborative environment where innovation is celebrated., • Impactful Work – Shape projects that enhance communities and push design boundaries., • Professional Growth – Opportunities to mentor, lead, and advance your career in a dynamic studio.

Job DescriptionSenior Veritas eDiscovery Platform (eDP) EngineerEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas eDiscovery Platform (eDP) Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas eDiscovery Platform (eDP) Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:Personnel assigned to this task must have the ability to adjust to changing priorities and work well under pressure. In addition, personnel may provide support along with OGC, to other FBI Divisions, such as CTD. At the Government’s discretion, available funding, and need this position will support Criminal Discovery Program. The Senior Veritas eDiscovery Platform is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed;- Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor Shall facilitate the migration of the system implementation into cloud infrastructures. - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Software Development Engineer in Test (SDET) Location: Sylmar, CA (100% Onsite – No Remote/Hybrid) Contract Duration: 1 Year (with possibility of extension) Pay Rate: $50–$55/hour Contract Type: W-2 Only (No visa sponsorships or C2C) Position Summary: We are seeking a Software Development Engineer in Test (SDET) to join a fast-paced Agile team at a leading regulated medical device company. This is a 100% onsite role based in Sylmar, CA — candidates must live within one hour of the worksite due to daily onsite requirements. In this role, you’ll collaborate closely with developers, product owners, and QA leadership to drive end-to-end testing for applications that support clinical trials globally. The ideal candidate brings a strong foundation in test automation using C#, Selenium, or Playwright, but is also comfortable contributing to manual testing efforts using tools like Postman, JMeter, and SQL queries. You must also be able (or willing) to write test cases aligned with regulatory standards. About the Environment: You’ll be embedded in an Agile Scrum team developing and supporting internal and external web-based applications using modern tools and frameworks, including: • .NET (legacy and .NET Core), • Angular, • Oracle PL/SQL, • Kubernetes, • Azure DevOps (on-prem) Key Responsibilities: • Develop and maintain automated UI and integration tests using Playwright (C#) and other .NET-based testing frameworks (e.g., xUnit, NUnit), • Perform manual and exploratory testing for Angular/.NET applications, • Attend Scrum ceremonies and help define testable acceptance criteria, • Collaborate with developers to build scalable test solutions from early stages of development, • Integrate automated tests into CI/CD pipelines via Azure DevOps, • Maintain and expand a shared automation framework, • Write and execute SQL queries to validate backend data (Oracle PL/SQL preferred), • File clear, detailed defect reports and assist with triage, • Ensure all testing practices comply with regulated environment standards, • Contribute to test data setup and manage test documentation Required Qualifications: • 2–4 years of experience as an SDET or QA Automation Engineer, • Proficiency in C# and solid understanding of object-oriented principles, • Experience testing Angular front-end applications and back-end APIs, • Hands-on experience with automation tools like Playwright, Selenium, or Cypress, • Familiarity with Azure DevOps and CI/CD environments, • Comfortable writing and executing SQL queries; experience with Oracle PL/SQL is a plus, • Strong analytical and debugging skills, • Previous participation in Agile/Scrum environments, • Must reside within 1 hour of Sylmar, CA (local candidates only) Preferred Qualifications: • Experience with performance testing using JMeter, • Familiarity with Kubernetes and containerized environments, • Experience working in regulated industries (medical device, pharma, healthcare, finance, aerospace), • Familiarity with Azure DevOps Test Plans or other test case management systems

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. CX2 is seeking a highly skilled Electronic Warfare Hardware Engineer to join our growing team. The ideal candidate will have extensive experience in designing, testing and building Electronic Support (ES), Electronic Attack (EA) and/or Anti-jam features for communications, signal detection, RADAR and associated Electronic Warfare systems. This role requires an onsite presence in our El Segundo, CA HQ; a remote work environment is not considered for this opportunity. Key Responsibilities • Design, validate & deliver EW payloads end-to-end: RF front-ends and wideband receivers for Electronic Support Measures/Electronics, • Intelligence/Communications Intelligence systems; architect high-dynamic-range chains (LNA → filters → mixers → clocks/LOs → ADC/DAC)., • Model, optimize, and characterize ultra-wideband apertures for analog and/or digital DF/beamforming; perform calibration at component and system level, • Jamming & Assoc. Techniques: Develop Electronics Attack/Electronic Countermeasures modes (smart jamming, deceptive techniques), frequency agility, notch/adaptive filters, and cognitive EW that learns in-the-loop., • Signal processing: Design characterize and deliver channelizers, wideband detection/classification, LPI/LPD intercept, and MIMO/digital-array algorithms in MATLAB/Python/C++ and accelerate on FPGA/RFSoC/GPU., • Test & verification: Operate anechoic chamber / antenna range campaigns — far-field, over-the-air tests, VNA/S-parameters, pattern measurements, calibration, & EMI/EMC., • Own requirements, ICDs, and verification from concept to flight; root-cause tricky RF issues (isolation/coupling, LO leakage, clocking/jitter, thermal) quickly., • BS/MS in EE, CE, or related field (PhD a plus), and at least 5 years’ experience with EW subsystems and payloads., • Receiver design across analog/RF/mixed-signal domains: filters (lumped/microstrip/cavity), mixers, PLLs/LOs, gain/linearity/noise trades; schematic/PCB design with Altium (or similar)., • Hands-on antenna/RF system design and validation with HFSS and VNA/anechoic chamber workflows; ability to turn simulations into flight-worthy, Tier 1 deliverable hardware., • Channelizers & wideband architectures: filter banks, analog/digital downconversion, sample-rate planning, clocking/synchronization across nodes., • RF filter design & analysis (lumped/distributed) and practical EMC/EMI mitigation., • RF test & antenna range execution: spectrum analyzers, sig gens, VNAs, phased-array controllers, and over-the-air characterization., • To Conform to US Government Regulations, applicant must be a (i) U.S. Citizen or National or (ii) U.S. lawful, permanent resident (aka green card holder). Learn more about the ITAR here.Bonus Points, • EA/ECM technique design (deception, Digital RF Memory, coherent/non-coherent techniques)., • Comms system design (LPI/LPD, Waveform-of-Interest exploitation), • RF machine learning for emitter ID, modulation/classification, anomaly detection, PDW creation, • Flight test & telemetry experience; mission data analysis., • Autonomy-adjacent systems (UAS swarming, collaborative EW)., • Tools Experience: ADS/AWR/SystemVue, MATLAB/Simulink, Python (NumPy/SciPy), GNU Radio/SDR (USRP/RFSoC), VITA-49; HDL/firmware experience also helpful (Vivado/Quartus/Libero)., • Clearance: Active Secret or ability to obtain and maintain; TS/SCI eligibility preferred. ITAR/EAR-controlled work., • Field work: supporting periodic travel for flight tests and customer demonstrations/support, • Mindset: Builder-tester who loves first-principles RF, rapid lab iteration, and getting hardware flying fast.What We Offer, • Competitive salary, stock options and benefits, including health, vision and dental., • 401K enrollment at 90 days., • Generous PTO + most Federal Holidays observed., • Collaborative and inclusive work environment., • Access to the latest tools and technologies., • High levels of responsibility and autonomy., • Professional growth and development opportunities.

Job DescriptionWe encourage all levels, SR IC->Director, to apply! Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised a $260 million Series C to accelerate this mission. We are excited to launch a new factory in Mesa, Arizona, a 270,000-square-foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve the naval production sector, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian collaborates with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across aerospace, shipbuilding, and aviation to scale production, reduce costs, and expedite delivery on mission-critical programs—leading investors, including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales teams in forming long-term partnerships with the DOD, primes, and other manufacturers. This team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in progress, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and oversee (or join) the execution of large-scale manufacturing efforts. The Role: Lead Manufacturing Engineer, Welding - We encourage all levels, SR IC->Director, to apply! * This role will oversee drawing reviews, capital expenditure planning, and automation feedback for Welding as part of the Factories as a Service team. * The Hadrian Factories as a Service team works across all manufacturing methods, and this role is expected to be the Lead Engineer for scoping, designing, planning, and automation feedback for welding across all material types and configurations. * You’ll be able to review drawings for manufacturability rapidly, select the right CapEx for part numbers and assemblies, advise our automation team on welding best practices, and have a deep working knowledge of production and inspection methods for Welding. * This role will both assist in building new factories for existing production scope, as well as contribute to the manufacturing processes of new products where Welding is a designed-in function. * You’ll recruit and lead 1-2 Welding MEs to assist, and work with Hadrian’s Automation and Factories Leadership teams to design and ship comprehensive Welding production and inspection lines. * We are looking for individuals who can analyze drawings at a technical level, but are also capable of planning Welding lines or factories from scratch, and are interviewing at all levels. What You’ll Do: * Analyse customer drawings and current state of production to design, build, and guide automation of Welding DFM, Production, and Inspection Lines * Contribute as a key player in factories as a service efforts * Deliver cost/schedule/solutions in partnership with our customers and the Federal team * Own CapEx planning, vendor selection, and costing What We’re Looking For: * Senior Manager or above level who’s technically in the weeds, with deep expertise in * Welding production and inspection * Able to travel ~25% to DOD and prime facilities * Capable of leading 1-2 Welding MEs * Able to analyse DFM, and design/plan production and inspection lines for Welding * Prior experience standing up new Welding lines in Aerospace, Automotive, or other domains * Ability to move quickly and make risk-adjusted decisions What Will Set You Apart: * Software or automation experience is not required, but helpful * Working knowledge of Welding technology and CapEx Benefits: * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer: It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Exciting Remote Encryption Engineer (HSM), 6 months, contract opportunity. Requirements • Experience with deploying encryption manager on VMware, Hypervisor, Azure, AWS, Google Cloud environments, • Experience in HSM, Luna, Ciphertrust, ProtectDB, Protectapp. Key Management, etc, • Experience with basic network skillset to understand (static, DHCP, VLANs, Bonding) customers environment and guide them on the best practices on the network design for the project, • Function as technical point of contact for customer deployments and as a mentor for other Wavestrong team members, • Provide training and knowledge transfer, • Provide strong product and professional services solution presentation to different types of audiences, internal and external., • Comfortable with Active Directory, power shell, NTFS administration and group policy administration., • Experience with virtualization – VMWare, Xen, KVM and/or Docker a key skill, • Experienced with cloud environments (AWS, Azure, VMWare), • Experience with firewalls and routing tables. Cisco experience a plus., • Understanding of the principles of both cloud technologies and on-prem application security, including public key infrastructures., • Knowledge of Authentication and Identity management solutions, • Experience Two Factor Authentication Using one time passcode, • Experience Understanding of RADIUS authentication, • Experience of SAML Authentication- Identity Provider – Service Provider, • Experience of traditional user directories, AD, Sun Directory, etc., • Experience of LDAP Configuration, deployment and consumption of services

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Vehicle Engineering organization at Relativity Space encompasses design and hardware build, as well as the analysis, software, CONOPs development, risk management, and customer-facing and regulatory activities needed to be ready for test and launch operations. We are seeking a Principal Technical Program Manager - Engineering Programs to lead and scale our vehicle engineering program management organization. This role will be critical in driving operational excellence across all engineering disciplines, standardizing programmatic best practices, and acting as a senior interface to leadership across Relativity Space. Success in this role will mean delivering Terran R Vehicle Engineering outcomes on time, at the right risk posture. About the Role: • Execution Strategy & Risk Management, • Own schedule adherence, risk management, and reporting cadence across all Vehicle Engineering departments, • Identify, assess, and mitigate risks associated with engineering program execution, ensuring proactive problem resolution to identify risks coming down the pipeline, • Present program updates, risks, and strategic recommendations to the executive team, • Cross-Functional and Strategic Leadership, • Establish and maintain a culture of excellence in program execution in Vehicle Engineering, • Collaborate with PMOs and department leaders across the company to maintain a program level Integrated Master Schedule (IMS), understand true program critical path, escalate issues and decision points, and make recommendations on the best solutions to program issues, • Goal Tracking & Reporting, • Establish goals and metrics to monitor operational performance and increase the predictability and efficiency of engineering work - building the scoreboard for accountability for the engineering team, • Facilitate strong communication within departments and across the program to ensure transparent communication of program status to relevant stakeholders, • Team Growth & Development, • Build, lead, mentor, and coach a team of TPMs to drive engineering department success, • Bachelor's degree in engineering, science, mathematics, or related fields; aerospace, electrical, or mechanical engineering degree preferred, • 5+ years technical leadership experience, proven track record of success and strategic thinking while balancing conflicting priorities and goals, • 5+ years in a Program Management role leading a large cross-functional program, including hardware, software, and operations, • Demonstrated success leading large, cross-functional hardware teams from concept through delivery in fast-paced, high-ambiguity environments. Seamlessly able to switch between tactical execution and 30,000-ft perspective, • Proven ability to communicate with highly technical teams and helping bridge communication between technical and non-technical teams, • Experience with launch vehicles, propulsion systems, or aerospace hardware, • Experience building or scaling a PMO or program operations in a high-growth organization, • PMP, MBA, Master's in engineering, science, mathematics or related fields, or equivalent experience preferred Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$196,000—$253,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionBring your architectural expertise to the forefront of design excellence at Cuningham. We’re seeking a Senior Specifications Writer who thrives on transforming design intent into precise, coordinated, and buildable documentation for complex, high-profile projects. With your background in architecture, license preferred, you’ll lead the charge in developing CSI MasterFormat specifications that integrate seamlessly with our drawings, championing quality, performance, and sustainability at every step. Collaborating across disciplines and with external consultants, you’ll be a trusted technical leader, guiding teams, mentoring emerging professionals, and influencing how our projects are delivered from concept through construction. While candidates located near one of our offices are preferred, we are open to considering remote work arrangements for the right candidate. What you will do: • Prepare and manage project specifications in SpecLink Cloud across multiple project types, including multifamily housing, hospitality, education, and other commercial and institutional types., • Edit Divisions 00 & 01 for varied owner requirements and delivery methods., • Collaborate with internal teams and external consultants through meetings and design reviews to align specification efforts., • Serve as a technical resource for products, materials, building systems, and performance standards, integrating these into architectural andinteriorspecifications., • Review drawings at each phase to maintain consistency between documents and specifications; prepare addenda, evaluate substitutions, and oversee outsourced spec quality., • Support quality management processes by validating compliance with codes, regulations, and firm standards., • Stay current on client, project, and regional requirements; engage with product representatives to refine and share material selections firmwide., • Mentor and train staff in specification writing, best practices, and related software, fostering a culture of technical excellence and regenerative design. What we look for:, • Professional degree in Architecture or Interior Design; architectural license preferred., • Minimum of 10 years of architectural experience, including at least 7 years of proven expertise in specification writing, clearly demonstrated on the resume., • CSI CCS certification preferred., • Proficiency in CSI MasterFormat and specification software, preferably SpecLink Cloud., • Strong knowledge of building materials, systems, codes, and industry standards., • Experience with Divisions 00 & 01 and multiple project delivery methods., • Ability to coordinate across disciplines and work with consultants to produce fully integrated construction documents., • Familiarity with sustainable design frameworks (LEED, WELL, Living Building Challenge) and their application in specifications., • Skilled in reviewing drawings for alignment with specifications and quality standards., • Strong written and verbal communication skills, with the ability to clearly explain technical requirements., • Proficiency in MS Office and Bluebeam; familiarity with Revit/BIM 360., • Proven ability to mentor and train junior staff in specification writing and best practices. Cuningham is an Equal Opportunity/Affirmative Action Employer and values the strength diversity brings to the workplace when combined with equity and justice. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, marital status, age, genetic information, national origin, disability, military, or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Davenergy Solutions is a rapidly growing, profitable company, headquartered in San Diego, CA. Our employees are the key to maintaining our competitive edge. To attract and retain the best industry talent, Davenergy Solutions shares its success with its employees and is committed to providing a professional work environment where learning, growth and recognition are highly valued. If you are seeking an opportunity to work in a progressive organization that will offer you diversified challenges and an excellent opportunity for advancement, please review our current employment opportunities. For more information about Davenergy Solutions and open positions please visit our website at . Davenergy Solutions is currently seeking an onsite full-time Construction Manager Electrical Engineer (CM-EE) at the Sepulveda Veterans Medical Center in Los Angeles, CA. This is required support needed to meet the Electronic Health Records Modernization (EHRM) infrastructure upgrade across the VA Sepulveda Healthcare System. Requirements: • Conducts portions of daily inspections of site work, building construction work; documents discrepancies, code violations, improper materials, or techniques in the application of materials, substandard or poor-quality workmanship; monitors schedules on various aspects of ongoing daily activities to identify and mitigate project slippage and coordinate project phasing., • Responsible for the engineering analysis, development, design of, and the preparation of complete plans and specifications for new work and improvements., • Provides technical oversight and evaluation concerning all engineering disciplines as they pertain to all project work., • Submit daily, weekly, and monthly reports indicating work completed, work in progress with estimated completion dates, work scheduled and outstanding work., • Experience reviewing design and construction plans against existing site conditions., • Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions., • Experience conducting inspections and inventories of medical and administrative services structures to identify and note deficiencies, problems, or the general physical condition of such structures., • Must have ten (10) years experience practicing electrical engineering., • Must have ten (10) years experience inspecting electrical construction., • The CM-EE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each considering the requirements of the project., • Ability to survey existing job conditions and confer with requesting medical center personnel to determine exact scope of project, phasing, impact on other medical center services and other specific design requirements., • Ability to provide cost estimates and take-offs for contract modifications., • Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards., • Determines how project(s) will impact medical center based on results of a risk assessment that could have a severe impact on patient care., • Independently responsible and accountable for determining the action necessary in the development and completion of design projects, coordination of project staff which may include architects, engineers, engineering technicians, draftsmen, and clerk/typists and review of the final contract documents., • Knowledge of governmental contracting procedures, principles, guidelines and public law., • Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy., • The CM-EE shall be a licensed Professional Engineer (PE) with a Bachelors Degree in Electrical Engineering from an ABET accredited institution of higher learning with six (6) years of experience., • The CM-EE shall have at least ten (10) years of experience in electrical engineering and a Bachelors Degree in Electrical Engineering from an ABET-accredited institution of higher learning; in lieu of education, a minimum of fifteen (15) years of experience in electrical engineering. · 401(k) · 401(k) Non-Discretionary Contribution . Discretionary Profit Sharing (Annual Performance Based) · Health Insurance · Dental Insurance · Vision Insurance · Paid Time Off Optional Benefits · Accident Coverage · Short Term Disability · Long Term Disability · Term Life Insurance · Medical Bridge · Critical Illness

Job DescriptionDescriptionAlta is looking for an Engineering Designer I to join our growing Los Angeles office design team. This production-level position is a fantastic opportunity for someone who believes in the importance of active, multimodal, and sustainable transportation and who is interested in growing their career as a transportation engineering professional. In this role, you will work on the design of a variety of sustainable transportation projects and work on projects focused on making a positive impact on communities around Southern California and across the country. This may include concept-level design for projects like complete street reconfigurations, development of construction documents, and production of high-quality graphics Specific project work will involve bikeway design, shared use path design and feasibility, streetscape design, civil design, and urban design. You will be challenged to think at various scales from the systems-level down to specific sites or intersections and learn from industry leaders in active transport. Engineers who enjoy working closely with other disciplines will appreciate our Los Angeles team’s multi-disciplinary approach that encourages collaboration with our planners, landscape architects, graphics designers, outreach specialists, and data analysts. If you are looking to join an innovative organization and do work that connects people to places while advancing social justice, safety, and environmental resilience, apply with Alta today! About Alta Alta Planning + Design is a sustainable transportation company dedicated to creating active, healthy communities through planning, landscape architecture, engineering, and education/encouragement programs. Alta was founded in 1996 when communities were calling for safer streets for people walking and bicycling as the non-motorized transportation movement developed into a profession in the United States. We pioneered the field of active transportation, evolving our planning and design work into a visionary global practice that empowers people to live active, healthy lives and gets them to where they need to go. Our core values and work bring about positive change by creating places that are geared toward moving people rather than cars, connecting community members to daily needs and human experience, and empowering every person to live an active healthy life. As a global leader in mobility innovation for over 27 years with over 200 staff, we are dedicated to connecting people to places by working across disciplines and scale to address social justice, safety, and environmental resilience. Day to DayYou will be a part of a multidisciplinary team responsible for leading and delivering a wide range of multimodal projects ranging from quick-build intersections, complex bikeway design, complete streets, and trails. You will be responsible for a variety of design tasks including geometric layout, grading, signing and striping, storm drainage, green infrastructure, traffic control plans, construction staging, details, and engineer’s estimates for large- and small-scale bicycle and pedestrian improvement projects, complete streets, and multimodal projects. You will progressively develop abilities in solving complex transportation problems with creative solutions. From time to time, you may participate in and lead some site visits to project sites to investigate existing conditions and observe construction activities. You will lead some project tasks and assist in creating project documents to prepare a complete, bid-ready Plans, Specification, and Estimate package. You may be designated as the project design lead or support a project design lead and/or project manager in client coordination, sub-consultant coordination, and document review. You will participate in and be encouraged to lead some project coordination meetings with clients (both internal and external). Some support may be requested when pursuing projects including writing the scope of work, preparing fee estimates, preparing technical graphics and concepts, reviewing proposals for other technical content, and coordinating with internal staff. You will also support a variety of internal and external clients on creating conceptual designs and plans for grant applications, feasibility studies, corridor studies, and other planning documents. QualificationsRequired: • 0-2 years of experience ideally in a consulting environment or public entity, • Bachelor’s degree in Civil Engineering, Transportation Engineering or a related field of study., • Proficient in MicroStation Connect and OpenRoads Designer., • Experience in, or knowledge of, the field of active transportation and street design., • Demonstrated understanding and/or experience in preparation of exhibits, concept drawings, and Plans, Specifications and Estimates packages for transportation projects., • Ability to collaborate with staff members across the company and manage internal team expectations., • Interest in developing multimodal transportation skills, design proficiency, problem solving skills, and all-around civil transportation proficiency., • Ability to manage competing priorities and tasks on multiple simultaneous projects involving cross-functional project teams within budgetary and schedule constraints., • Excellent professional ethics, leadership skills, accountability, and decision-making capabilities., • Excellent interpersonal, written and verbal communication and analytic skills., • Proficient in Excel, Word, or similar software., • Master’s degree in Civil Engineering, Transportation Engineering or a related field of study., • Proficient in civil engineering software: GEOPAK, InRoads, AutoCAD, Civil3D., • Experience managing projects for both private and public clients., • Experience in task management for design projects., • Experience using Deltek Vision. CompensationThe pay range for Engineering Designers in Los Angeles is $75,000-$100,000 annually. Placement within the range is based upon experience, skill-sets, and qualifications. BenefitsAlta offers comprehensive benefits to all full-time employees: • Medical: PPO or HSA medical plans, • Dental/Vision: PPO, • Life Insurance: Alta pays 100% of the premium for life and AD&D, equal to your base compensation, • 401(k): Alta provides a match up to 3%, • PTO: 21 days accrued annually to start, • Holidays: 11 total company paid holidays, • Additional Benefits: Wellness reimbursement up to $800 annually, Alta Gets Around benefit of up to $900 annually, 5-year travel award, and professional development opportunities#LI-CL1

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Contract-to-Hire, Hybrid within CA or AZ Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary The Sales Application Engineer for Industrial and Environmental (I&E) role at Veolia WTS’s Sievers Analytical Instruments (AI) focuses on supporting internal and external sales teams in commercial processes and driving an excellent customer experience through advanced technical support. Most of AI’s technology is made in and distributed from its headquarters in Boulder, CO. The Sales Applications Engineer interfaces with many different parts of the business to gain and maintain expert level product knowledge, including but not limited to product management, technology (hardware and software), field service, and factory service teams. Veolia and AI have global presence with facilities in many countries including Hungary and Singapore, and its products are sold and serviced directly and indirectly by independent sales/service providers. This requires interfacing with people both internally and externally that represent a broad range of product knowledge, time zones, and cultural backgrounds. This is a remote based travel position (roughly 50%), reporting directly to the I&E Sales Manager, and will have a matrix manager for duties related to service support. This role focuses on instruments designed for markets within the Industrial and Environmental business vertical. This includes InnovOx products, TOC-R3, Boron and Boron Ultra, and M-Series. Key Characteristics: • The candidate will be continuously interfacing with members of the sales team, specialist team, managers, leaders in the aftermarket group, and with teams across the organization, so the desire and ability to work cross functionally within the business to drive projects and business initiatives is key, • A strong customer focus is required to deliver on our goal of sales, service and support excellence., • This includes contributing directly to the customer and also indirectly in the collaboration, training, and support of service personnel globally, as well as to direct and indirect sales team members within the NAM and LATAM territories, • A deep interest in understanding the mechanics and theory of how analytical instruments work is critical, • This includes a desire to understand fluidic, mechanical, and electronic systems on a technical level An understanding of the sales cycle steps is essential to provide high-level support for sales teams Duties & Responsibilities: • Contribute to instrument sales cycle:, • Supporting team members during their sales meetings (onsite and remote) sharing technical and application knowledge, • Supporting the instrument demo and trial processes in coordination with local sales representative, • Owning the application approval process, from the data collection from a customer, up to creating an approval form and sharing all necessary information with the aftermarket team, allowing for a successful customer experience, • Actively contributing to new applications development process, working with internal teams and customers, • Providing value proposition and technical training to internal and external sales team members, • Contribute to training by developing content that captures advanced troubleshooting and applications knowledge:, • Training sales people, customers, field service engineers, specialists, and third parties, domestically and globally, • Creating supplement training materials to meet the needs of the industrial and, • environmental business, • Creating video content, presentations, virtual training sessions, and documentation, • Routinely engage with teams to anticipate needs and/or knowledge gaps, • Traveling with internal industrial and environmental personnel, • Participating in and contributing to industrial and environmental specific meetings, • Create and maintain manuals that are distributed internally and externally, • Participate in and contribute to various meetings hosted by different departments to obtain and maintain expert level knowledge of assigned products and services, • Actively manage advanced technical or customer service cases, • Work directly with sales/service personnel or with the end user to resolve quality, service, or customer relations issues (This may require phone/remote support or on-site support, traveling to customer sites), • Support the launch of new products by being actively involved with the NPI process., • Provide technical input during early design phases, • Communicate information across the service organization as it relates to impacts to their job function, • Participate in the testing of procedures, • Conduct installations and validations for early instrument installs to build product, • knowledge, training, and service manual contentQualifications Knowledge, Skills & Abilities: • The candidate must have knowledge of general lab safety practices and manufacturing site safety practices., • Good, practical knowledge of analytical chemistry concepts and practices, • Good, practical understanding of process control, water systems, and instrumentation, • Must be able to proactively work cross-functionally to obtain the necessary technical information to support the job function and proper dissemination of information across the organization, • Ability to adapt communication of technical information to meet the training needs of diverse audiences of different cultural backgrounds, levels of experience, and levels of education, • Time management and the ability to shift priorities is a must in order to adequately address quality issues and customer concerns, • Verbal communication and training skills are required to deliver effective training and presentations across the organization, to partners, and customers, • Computer skills including the use of word processing, spreadsheets, and cloud based customer records management software, • Project leadership skills required to effectively lead given projects through to completion, • Comfortability and understanding of hand tools and diagnostic devices such as multimeters and temperature verification devices, • Ability to disassemble and reassemble instruments and document the process, • Bachelor’s degree in Chemistry, Physics, Engineering, or other related science discipline., • 2-5 years of experience working in a laboratory, chemical processing, or manufacturing environment., • 4 years working directly with customers/end users in a customer facing role., • Experience with the sales cycle and supporting sales teams. Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: • Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $90,000 - $110,000 USD, • Medical, Dental, & Vision Insurance Starting Day 1!, • Life Insurance, • Paid Time Off, • Paid Holidays, • Parental Leave, • 401(k) Plan - 3% default contribution plus matching!, • Flexible Spending & Health Saving Accounts, • AD&D Insurance, • Disability Insurance Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. **Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity** VWTS does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of VWTS, and no fee will be due. All your information will be kept confidential according to EEO guidelines. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job DescriptionCompany Description Mondrian is a way of travel. With its groundbreaking design and progressive programming, it is a “must” destination for locals or travelers. Mondrian is always at the heart of the most exciting cultural scenes in the world, serving up innovation and creativity for everyone. Mondrian provides a playful framework so that guests and locals alike can immerse themselves in the culture of each city it inhabits. Perfectly nestled in the base of the glittering Hollywood Hills, Mondrian LA has made a name for itself as an icon in its own right. Enter through Mondrian’s 30-foot mahogany doors and settle into your luxurious retreat while discovering the wild within. Welcome to a world of effortless sophistication and vibrant culture. Job Description A Maintenance Engineer is responsible in maintaining and repairing the hotel's guest rooms and public areas. Engineers also maintain the equipment that staff members use during each workday. ESSENTIAL DUTIES: • Perform and Maintain preventive maintenance (PM) program., • Ensure all equipment, public areas, and guest rooms are maintained and in a presentable order, • Ensure all maintenance tasks are performed in a timely and professional manner, • Operate and properly maintain various types of electrical and mechanical equipment, • Repairs on split HVAC units, • Work on independent repair/upgrade projects as part of our team, • Maintain a clean working shop environment, • Respond to emergency calls and repairs, • Read and interpret instructions, diagrams and drawings, • Maintain pool balance and cleanliness What we're looking for... • Must understand basic mechanical, electrical and plumbing principals, • Three years in a public contact position, preferably in an upscale or lifestyle brand hotel, • Possess a gracious, friendly, and fun demeanor, • Ability to work in a fast paced environment and have a high level attention to detail, • Strong verbal and written communication skills in English, • Maintain positive and productive working relationships with other employees and departments, • You execute. You get things done, • Ability to take ownership of issues, solve problems and make effective decisions, • Ability to learn quickly and adapt to Mondrian’s unique culture, • You’ll work positively and collaboratively to achieve the highest standards of delivery at work Additional Information This job description is not an exclusive or exhaustive list of all job functions that an employee in this position may be asked to perform from time to time. This job description reflects the job content at the time of writing and will be subject to periodic change in light of changing operational and environmental requirements. Such changes will be discussed with the job holder and the job description amended accordingly. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to perform any other job-related duties assigned by their supervisor.

Job DescriptionCareer Renew is recruiting for one of its clients a Solidity Smart Contract Engineer - this is a fully remote role for US based candidates. We are an on-chain financial infrastructure company backed by leading VCs including Strobe Fund, CMT Digital, Metalayer VC, The Venture Dept, and Generative Ventures. We're upgrading financial markets through 24/7 instant settlement. Our first product is Multiliquid, an institutional-grade smart contract protocol that facilitates interoperability and liquidity across tokenized financial assets and stablecoins. Our mission is to bridge traditional finance (TradFi) assets and decentralised finance (DeFi) in a transparent, efficient, and highly scalable way, ultimately replatforming all of financial markets on 10x better infrastructure in the form of blockchain. Role Overview We're looking for a Smart Contract Developer to join our core engineering team. In this hands-on role, you'll design, develop, and deploy secure smart contracts that power the Multiliquid protocol. You'll architect on-chain logic, optimize gas efficiency, ensure security best practices, and build the foundational infrastructure that enables institutional-grade DeFi operations. This is an opportunity to shape the core protocol layer of institutional DeFi, building robust, auditable smart contracts that handle significant liquidity flows across multiple chains. You will work on a small, rigorously selected, senior team of engineers. You will be responsible for collaborating closely with product, compliance, security auditors, and business stakeholders. This is a high-impact role requiring deep technical expertise in blockchain development, strong security mindset, strategic thinking, and a passion for delivering best-in-class DeFi solutions. Key Responsibilities Smart Contract Development * Design, develop, test, and deploy secure smart contracts in Solidity for the Multiliquid protocol using Foundry. * Implement complex DeFi primitives including liquidity pools, cross-chain bridges, access control mechanisms, and institutional-grade financial logic. * Write clean, well-documented, gas-optimized code that adheres to industry best practices and established design patterns. Protocol Architecture * Architect scalable, modular smart contract systems that support evolving protocol requirements. * Design upgradeable contract patterns and governance mechanisms for protocol evolution. * Collaborate with the engineering team to define on-chain/off-chain boundaries and integration points. Security & Auditing * Conduct thorough internal security reviews and testing of smart contracts before deployment. * Work closely with external auditors to address findings and implement recommended security improvements. * Proactively identify and mitigate potential vulnerabilities, attack vectors, and edge cases. * Stay current with emerging security threats and best practices in the DeFi ecosystem. Testing & Quality Assurance * Write comprehensive unit tests, integration tests, and fuzzing tests for all smart contract code. * Develop test suites that cover edge cases, failure scenarios, and adversarial conditions. * Participate in code reviews and provide constructive feedback to maintain high code quality standards. Cross-Chain & Integration Work * Implement cross-chain messaging protocols and bridge integrations to enable multi-chain liquidity flows. * Collaborate with full-stack engineers to ensure seamless integration between smart contracts and front-end/back-end systems. * Design and document contract interfaces (ABIs) that enable efficient off-chain interaction. Hands-On Engineering * Actively write and deploy smart contract code to mainnet and testnets. * Lead the development of core protocol features and upgrades. * Monitor deployed contracts, respond to on-chain events, and troubleshoot issues in production environments. * Prototype, iterate, and optimize rapidly in a fast-moving environment. Required Qualifications Experience * 3+ years of experience developing and deploying production-ready smart contracts in Solidity. * Proven track record of shipping secure, battle-tested contracts that handle significant value. * Experience with DeFi protocols (AMMs, lending protocols, yield aggregators, etc.) is highly preferred. * Familiarity with cross-chain protocols and bridge architectures is a plus. Technical Skills * Expert-level proficiency in Solidity and deep understanding of the EVM. * Strong knowledge of smart contract security best practices, common vulnerabilities (reentrancy, front-running, access control issues, etc.), and mitigation strategies. * Proficiency with development frameworks such as Foundry and Hardhat. * Experience with testing frameworks and tools (Foundry, Hardhat, Echidna, Slither, etc.). * Familiarity with Web3 libraries (ethers.js, web3.js, viem) for contract interaction and testing. * Understanding of gas optimization techniques and on-chain efficiency. * Experience with upgrade patterns (proxy contracts, diamond pattern, etc.). * Knowledge of other blockchain ecosystems (L2s, alternative L1s) is a plus. * Familiarity with Rust or other systems programming languages is beneficial but not required. Soft Skills * Maniacal attention to detail and excellent ability to receive and internalize feedback. * Clear communicator able to work with both technical and non-technical teams. * Strong problem-solving abilities and comfort navigating complex systems. * Adaptable and entrepreneurial mindset suited to early-stage environments. * Desire to contribute professionally and personally as a member of a dynamic, collaborative, high-performing team. Why Join Us? * Impact: Help shape the user experience and interface of the future liquidity layer for tokenized finance. * Innovation: Work on real-world blockchain integrations powering institutional-grade capital flows. * Learning: Expand your understanding of DeFi, tokenized assets, and decentralized infrastructure. * Team: Join a collaborative, mission-driven team backed by top investors. Upside: Competitive salary, equity upside, and the chance to be an early builder of a transformative protocol. Compensation & Package Base Salary + Equity

Job Description At Serve Robotics, we’re reimagining how things move in cities. Our personable sidewalk robot is our vision for the future. It’s designed to take deliveries away from congested streets, make deliveries available to more people, and benefit local businesses. The Serve fleet has been delighting merchants, customers, and pedestrians along the way in Los Angeles, Miami, Dallas, Atlanta and Chicago while doing commercial deliveries. We’re looking for talented individuals who will grow robotic deliveries from surprising novelty to efficient ubiquity. Who We Are We are tech industry veterans in software, hardware, and design who are pooling our skills to build the future we want to live in. We are solving real-world problems leveraging robotics, machine learning and computer vision, among other disciplines, with a mindful eye towards the end-to-end user experience. Our team is agile, diverse, and driven. We believe that the best way to solve complicated dynamic problems is collaboratively and respectfully. Role Overview Serve’s simulation platform plays a pivotal role in the continuous development of our autonomy stack. As a member of our team, you will play a key role in developing advanced simulation features including procedural generation tools, agent behaviors, and highly realistic rendering for robotics applications. These simulation environments will serve as critical platforms for training machine learning models. Leveraging the large volumes of multimodal data collected from our robots, you will help bridge the gap between real-world data and simulated environments, enabling effective real-to-sim transfer at scale. Responsibilities * Simulation Bring-up: Lead the setup, configuration, and deployment of simulation environments for robotics testing and validation. * Worldbuilding Tools: Design and develop tools to generate highly realistic digital townscapes, including roads, sidewalks, vegetation, signage, and other urban elements. * Asset Integration: Create and integrate 3D assets that blend seamlessly into complex, real-world-inspired environments. * Unreal Engine Development: Utilize Unreal Engine 5 to build, optimize, and manage immersive simulation environments. * Synthetic Data Pipelines: Integrate simulation environments into workflows for generating large-scale training datasets for ML and robotics perception models. * Cross-Functional Collaboration: Partner with robotics engineers, ML researchers, and software developers to ensure simulation fidelity, scalability, and usefulness. * Continuous Improvement: Debug, test, and refine simulation environments for accuracy, realism, performance, and maintainability. Qualifications * Bachelor’s degree in Computer Science, Robotics, Game Development, with 5+ years of experience in a related field. * Proven experience with Unreal Engine 5 for environment development and simulation. * Strong proficiency in 3D asset creation, scene composition, and environmental modeling. * Strong C++ skills for designing performant and maintainable systems. * Experience with Python for scripting, automation, and integration. * Ability to work cross-functionally and deliver results in a fast-paced robotics environment. What Makes You Stand Out * Master’s degree in Computer Science, Robotics, Game Development, or a related field. * Understanding of computer vision, robotics simulation, or reinforcement learning workflows. * Knowledge of digital twins, synthetic data generation, or training-data pipelines. * Familiarity with tools such as Blender, Maya, or other 3D modeling software. * Strong portfolio showcasing realistic environment creation and asset integration. * Deep understanding of physics-based simulation for robotics (e.g., sensor simulation, collision modeling). * Prior work on synthetic data generation specifically for robotics perception models. * Hands-on experience with robotics simulation frameworks(NVIDIA Isaac Sim , CARLA, or Gazebo). * Contributions to open-source projects in robotics simulation, digital twins, or Unreal Engine. Compensation Range: $170K - $220K

Job DescriptionDescriptionAs an Opto-Mechanical Manufacturing Engineer at Impulse, you will work with cross-discipline teams to build opto-mechanical assemblies. You will own the build, testing, and integration of optical assembly production. Your expertise will directly impact the reliability and performance of the systems we send into orbit and beyond. Leveling will be commensurate with experience. Responsibilities • Develop, document, and optimize manufacturing processes for opto-mechanical assemblies., • Develop, document, and optimize metrology processes for opto-mechanical assemblies in production., • Collaborate with optical design engineers to ensure manufacturability, DFM/DFA of optical assemblies, including custom spherical and aspherical lenses/mirrors., • Collaborate with cross functional teams on quality and long-term reliability., • Manage the optics manufacturing cleanroom, including sourcing equipment and setting processes and policies., • Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields., • Provide guidance to opto-mechanical technicians., • Support environmental and functional testing (optical, vibe, thermal, etc.) in production. Minimum Qualifications • Bachelors' degree in Mechanical Engineering, Electrical Engineering, Physics or related field, • 4+ years of demonstrated manufacturing experience in high-precision opto-mechanical manufacturing, • 4+ years of optical metrology equipment experience, such as centration measurements, interferometry and wavefront sensors. Preferred Skills and Experience • MS/PhD degree in Mechanical Engineering, Electrical Engineering, Physics or related field, • 6+ years of demonstrated manufacturing experience in high-precision opto-mechanical manufacturing, • 6+ years of optical metrology experience, including Fizeau interferometry., • Experience with optical centration station automation and oversight, • Experience with fabrication of spherical and aspherical lenses/mirrors, • Experience in spaceflight hardware development or opto-mechanical devices for space applications, • Background in design-for-manufacturing (DFM) and continuous improvement methods for optical assemblies, • Experience with managing a cleanroom facility for optical device manufacturing Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $75,000 - $85,000 Title: Project Engineer Reports To: Senior Project Manager/Project Manager Direct Reports: None FLSA Status: Exempt Job Overview Southern California-based commercial construction & development company Howard CDM is seeking a reliable and team-oriented Project Engineer to join our growing firm. This is a great opportunity for a career-minded person who would enjoy working in a fun and fast-paced environment for a company with a track record of upskilling and promoting its employees. As a Project Engineer at Howard CDM, you will have the opportunity to work on exciting projects in a variety of market sectors. The Project Engineer will be responsible for evaluation of submittals and RFIs to support construction activities and resolution of design and field issues. The Project Engineer will assist the Project Manager with interacting with subcontractors, field supervisors, owner representatives and architects to ensure quality and timely completion of the project. Project Engineering • Work in conjunction with the coordination teams, management teams and field staff, • General Contract and Subcontract administration, • Construction scheduling, • Material and equipment procurement and expediting, • Shop drawing and submittal review and coordination, • Project cost review, reporting, updating and accounting, • Creation of RFI documents as needed, • Create and maintain project meeting minutes and log, • Review and negotiate change proposal pricing, • Change order documentation and associated cost reporting and maintenance, • Research and suggest options on construction means, methods and equipment, • Assist the Project Manager and Superintendent in the development and management of projects through additional tasks as needed, • Other duties as assigned Qualifications • A combination of a bachelors degree (preferably in Construction Management, Building Construction, or related field) and 3+ years experience as a Project Engineer at a GC or 5+ years of experience as a Project Engineer at a GC., • Strong technical and administrative skills along with the ability to be organized, • Multi-tasking skills and the ability to coordinate work on several facets of a project, • Superior written and verbal communication skills, • Proficient in Microsoft Office (Word, Excel, Outlook), Microsoft Project, Procore, Bluebeam, Sage300CRE, and other project-related software, • Valid California Drivers License and Drivers Record suitable to company insurance policy, • Excellent time management & organization skills Logistics & Benefits • Full-Time, 8am-5pm, • Onsite in Bellflower, Travel to Worksites as needed, • $75,000 - $85,000, • Auto and Phone reimbursements if applicable, • Health Insurance, • Dental Insurance, • Vision Insurance, • 401K with Company Matching, • PTO, • Section 125 Plan and Flex Spending Accounts How We Determine What We Pay Howard CDM determines pay for positions using local, national, and industry-specific survey data. We evaluate external equity and the cost of labor/prevailing wage index in the relative marketplace for jobs directly comparable to jobs within our company. Our posted salary range is based on national data and may be refined for a candidate's region/town/cost of living. For new hires, we strive to make competitive offers allowing the new employee room for future growth. Salaries will be based on the applicants location, level of experience, education, and specialized knowledge and skills. Additionally, we consider the external market rate, the amount we have budgeted internally, and internal equity within the company for the same position. An employee/candidate with a stronger skill set will receive higher pay. Howard CDM is an Equal Opportunity Employer; employment with Howard CDM is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All offers of employment at Howard CDM are contingent upon clear results of a thorough background check, drug screen, and your ability to provide proof of eligibility to work in the US. Employment with Howard CDM is at will. This means your employment is for an indefinite period of time and it is subject to termination by you or Howard CDM, with or without cause, with or without notice, and at any time. Nothing in this policy or any other policy of Howard CDM shall be interpreted to be in conflict with or to eliminate or modify in any way, the at-will employment status of Howard CDM employees.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is looking for an experienced Applications Engineer with an emphasis and subject matter expertise on Tube Bending to join our team. The Applications Engineer is responsible for the areas of customer quoting, supplier sourcing and project management. This person will be the subject matter expert on tube bending and fabrication. The position will require competencies that include CAD proficiency, knowledge of design for manufacturability, costing, technical communication, and a technical aptitude in hydraulic tubing. Responsibilities: • Provide cost estimates for manually quoted tube bending, tube cutting, and metal fabrication products, • Assist the Partner Network team in identifying and developing a partner base, • Provides pricing recommendations for manually quotes projects based on previous win rates with part types, industries and customers, • Understands all partner capabilities, identifies partner capability gaps, and guides/trains the sales team on the types of opportunities to pursue based on Xometry's capabilities, • Bachelor's degree in engineering highly preferred, • Minimum 3+ years of hands-on experience with tube bending, cutting and fabrication, • Minimum 5+ years of experience working in a manufacturing environment, • Ability to meet and communicate effectively with vendors, employees, and the public in a professional manner, • Excellent attention to detail and organizational skills, • Must be able to work under pressure and meet deadlines, • Strong computer skills specifically in Excel, Google Sheets, Word, and Google Docs. #LI-Hybrid Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal DevOps Engineer I for Embedded Software to own and scale the infrastructure that supports our mission critical software development across multiple programs and product lines. In this role, you will advance infrastructure that generates software images, deploys them onto hardware, ensures continuous integration/continuous development, organizes and optimizes Yocto embedded builds, and maintain high-performance, Linux-based build environments. The ideal candidate understands embedded software stacks and the modern tools that accelerate their development.JOB DUTIES AND RESPONSIBILITIES • Ideally deep experience with OpenEmbedded and the Yocto Project., • Understanding of make and cmake., • Understanding of build flows from compilation to image generation., • Facility with GitLab CI/CD pipelines and GitLab Runners that build, test, and deploy embedded software for harware for test., • Ensure CI systems integrate with hardware-in-the-loop test environments for regression and validation., • Deep facility with yaml-based CI configuration., • Facility with Docker virtual build environments and containerization., • Administer and maintain high-performance Linux build machines used for continuous integration, regression testing, and software release packaging., • Monitor system performance, scale compute resources, and maintain uptime for development teams., • Support and automate the software release process for production releases to customers., • Manage build artifacts, versioning, and delivery., • Act as the first line of support for developers encountering build, test, or environment issues., • Collaborate with software teams to improve developer productivity., • Assist in maintenance and utilization of company could-based AI productivity environmentJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Computer Science, Electrical/Computer Engineering, or related field (or equivalent experience)., • Minimum of 9 years of relevant experience., • Proven facility with CI/CD tools (e.g., GitLab CI, Jenkins, or similar)., • Proficiency in Linux system administration, including performance tuning and troubleshooting., • Familiarity with Yocto or other embedded Linux build frameworks., • Experience with build automation tools (CMake, Make, BitBake, etc.)., • Strong scripting skills (Python, Bash, or similar)., • Excellent problem-solving skills and ability to work collaboratively with developers., • Knowledge of networking and distributed systems., • Experience with containerization (Docker, Podman) and virtualization (KVM, VMWare)., • Knowledge of networking and distributed systems., • Familiarity with hardware-in-the-loop (HIL) testing environments.PREFERRED EXPERIENCE

Job Description Overview National Award-Winning Studio & Winner of Design Firm of the Year is actively seeking a Structural Project Engineer to join their Anaheim, Los Angeles, Berkeley, Rancho Cucamonga, or Fresno office. With over 19 offices across the U.S., the award-winning architecture + engineering firm specializes in K-12 through college/university, healthcare, sports and corporate business sectors across the U.S. The company has won over 500 design awards and is recognized for shaping learning environments for students and the community. It's well established culture has also led the firm being named to the list of “Best Places to Work.” For over forty years, the multidisciplinary studio has created a client base of more than two-hundred clients, a list that includes university systems, hospital system, school districts, and Fortune 500 companies. *Please note: This position is available at the Downtown Los Angeles & Berkeley office for senior-level candidates only. The Structural Division The Structural Division specializes in comprehensive structural engineering planning and design services, including structural assessments and forensics investigations. Their engineers have extensive experience and knowledge of structural engineering services for education, commercial, religious, healthcare, sports & entertainment, hospitality, retail, and federal/government. They offer our employees a highly competitive salary and benefits package along with numerous opportunities to become involved in extra-curricular activities and organizations established through the firm. Essential Duties & Responsibilities The Project Engineer will operate independently while receiving direct guidance from the Engineer of Record, contributing to the coordination and design of diverse structural projects throughout both design and construction phases. This role presents an outstanding opportunity for professional growth and career advancement within our forward-thinking structural engineering firm. They provide a highly competitive salary and benefits package. Success in this position requires an attentive, client-oriented individual with a flair for creative problem-solving. * Actively engage in coordination meetings with diverse stakeholders, including other disciplines, clients, and owners, and contribute to design review meetings. * Efficiently coordinate the design process to produce comprehensive construction documents within the specified project schedule and budget. * Skillfully prepare structural specifications, select construction procedures, determine materials and member sizes, and conduct all necessary calculations essential for design. * Play a crucial role in shop drawing reviews, responding to RFI’s (requests for information), handling change proposal requests, and seamlessly incorporating changes into project documents. * Utilize strong written and verbal communication skills to effectively convey design and coordination elements to other members of the project team. * Conduct site observations and walks during construction, preparing detailed reports to ensure project alignment with design intent and specifications. Education and Work Experience Requirements * Hold a Bachelor’s degree in civil engineering with a Structural emphasis. * Bring a minimum of 4 years of full-time progressive experience in structural engineering. * Possess a Professional Engineering license (P.E.) is required. * Demonstrate a robust understanding of the California Building Code (CBC) (only for California applicants!) and all relevant design codes such as ASCE, AISC, ACI, MSJC, NDS, etc. * Exhibit proficiency in widely-used structural engineering and office tools, including ETABS, SAFE, RISA, RAM, ENERCALC, Excel, Bluebeam, etc. * Showcase a high level of proficiency in performing complete gravity and lateral analyses using design software, along with preparing comprehensive structural engineering calculation packages. * Preferably have familiarity with educational projects and knowledge of DSA (California applicants only) requirements and processes. * Demonstrate expertise in the design of various structural materials, encompassing steel, concrete, masonry, wood, etc. * Exhibit proficiency in drafting and navigating Revit and AutoCAD, with a preference for experience in these platforms. * Possess excellent written and verbal communication skills. Additional Notes for California Applicants While the majority of their projects focus on K-12, their portfolio extends to encompass higher education, government buildings, sports facilities, fire stations, and modifications to existing structures. While expertise in educational projects and familiarity with the DSA process (California only applicants) are advantageous qualities in potential candidates, they also welcome individuals with a strong academic background and relevant experience in general building design in California. We look forward to receiving your application! Apply today to learn more.

Job Description Ruiz Foods has been family owned since 1964, is one of the largest Hispanic-owned companies in the country and is the proud maker of two #1 brands: El Monterey frozen Mexican food and Tornados roller grill taquitos in grocery stores and convenience stores across the US and Canada. Are you looking for career development opportunities in an exciting company that cares about its team members and consumers alike? Come join our team and help us continue our industry-leading track record of growth, quality, and delicious food! Responsible for managing engineering of capital projects including scheduling, scoping, cost controls, reporting automation, process, packaging, mechanical, structural, civil, electrical and architectural. Also, responsible for managing utility projects including ammonia refrigeration, wastewater, HVAC, electrical distribution, hydraulics, high- and low-pressure air and water systems, warehousing and employee welfare areas. This position is a Corporate Position and preferably based out of Los Angeles, or Fresno, CA areas or surrounding area, but the candidate may be expected to travel to other locations to support the other Company Plants. COMPENSATION: $140 - $160K/year DOE RESPONSIBILITIES: • Oversee development of projects from inception through close out. Responsible for estimation, cost controls and reporting., • Determine scope, cost and benefit analysis for automation initiatives in processing, production, bakery, primary and secondary packaging working with the engineering and supply chain teams., • Support the technical needs of the company by understanding customer requirements, market demands, and competitors’ capabilities and products, identifying and analyzing trends in technology, understanding and quantifying company strengths and shortcomings and conferring and collaboration with other members of management., • Develop standards for electrical and automation projects for the company, • Manage capital projects as necessary to meet the company’s financial and operational objectives, • Be instrumental in developing long term budget planning, costs, timing, and execution to meet business and operational needs., • Bachelor’s degree in engineering recommended, preferably Electrical, Mechanical or Chemical, or related field with a minimum of 5-10 years of experience in a food-processing environment., • Must be able to manage and execute major projects of $100k to +$100MM from concept development through implementation including scheduling and cost controls, • Able to interpret P&ID drawings and specifications, electrical design, network designs, PLC & HMI development, and electrical troubleshooting., • Be able to run and document team meetings and manage Risks, Actions, and Communications plans., • Have a working knowledge of robotics., • Must be capable of supervising crews and or maintenance personnel during projects., • Flexible to work weekends, holidays and nights depending on projects., • Must be a self-motivated individual with experience working in teams to accomplish objectives., • Ability to analyze data and develop recommendations and solutions., • Excellent planning, organizing and project management skills, PMO/PMI certification preferred, • Ability to interact effectively at all levels and across diverse cultures., • Knowledgeable and use of Smartsheets, Microsoft Word, Excel, PowerPoint, Outlook. Microsoft Project, and AutoCad.

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionJob Summary: We are seeking a highly skilled and detail-oriented Construction Project Engineer with a strong background in OSHPD and HCAI projects. The ideal candidate will assist in the planning, coordination, and execution of healthcare construction projects, ensuring compliance with state regulations and industry standards. This role requires a deep understanding of OSHPD/HCAI guidelines, construction processes, and collaboration with multiple stakeholders to achieve project success. Key Responsibilities: * Assist in the planning, scheduling, and management of OSHPD/HCAI-regulated healthcare construction projects. * Review and interpret blueprints, specifications, and regulatory requirements to ensure project compliance. * Coordinate with project managers, architects, engineers, and regulatory agencies to ensure smooth workflow. * Prepare and manage RFIs, submittals, change orders, and project documentation. * Conduct site inspections and assessments to monitor progress, compliance, and quality control. * Ensure adherence to OSHPD/HCAI standards, building codes, and safety regulations. * Work closely with inspectors, hospital staff, and construction teams to resolve project-related challenges. * Assist in budget tracking, cost analysis, and procurement of materials. * Utilize construction management software to track project milestones and documentation. * Participate in project meetings, providing updates and addressing issues proactively. Qualifications: * Bachelor’s degree in Construction Management, Civil Engineering, Mechanical Engineering, or a related field. * Minimum of 3 years of experience in construction engineering, with a focus on healthcare/OSHPD/HCAI projects. * Strong understanding of OSHPD/HCAI regulations, hospital construction requirements, and seismic compliance. * Proficiency in AutoCAD, Bluebeam, Procore, and other project management software. * Excellent problem-solving, analytical, and organizational skills. * Ability to interpret technical drawings and regulatory documents. * Strong communication skills to interact with stakeholders, regulatory agencies, and contractors. * Knowledge of infection control, life safety, and interim life safety measures (ILSM) in healthcare settings. * Ability to multitask and manage priorities in a fast-paced environment. * Certification in OSHPD IOR, HCAI training, or relevant healthcare construction certifications is a plus. Work Environment: * This role involves working in both an office and active healthcare construction site environment. * Frequent collaboration with hospital administrators, inspectors, and regulatory officials. * Occasional evening or weekend work may be required depending on project timelines. If you are a dedicated professional with expertise in healthcare construction and OSHPD/HCAI compliance, we encourage you to apply for this exciting opportunity.

Job DescriptionSummary Our client is currently seeking individuals for a full-time position as aMechanical Project Engineerlocated in the San Diego, CA area. Backed by the strength and stability that comes with almost a century of customer care and ownership, our client adheres to the highest safety standards for its employees and clients. They offer industry-leading building information modeling (BIM) capabilities, design/build services, sustainable solutions, commercial HVAC services, and complex mechanical and industrial system installations. Responsibilities Project Estimating (Take-Off & Analysis)Project Scheduling (Manpower scheduling)Manage RFIs (Requests for Information)Prepare Submittal PackagesManage Flow of Contractor provided submittal dataAssist in data population of formsPrepare Project Progress BillingsAssist in Technical Analysis, Trouble shooting, and problem solving of HVAC Air Equipment, HVAC Piping Equipment Systems, HVAC & Plumbing Equipment Skills and Experience Basic working knowledge HVAC & Plumbing Design & System OperationBasic working knowledge of Commercial & Industrial construction sequencesBasic working knowledge of construction estimatingBasic working knowledge of testing procedures for HVAC systems.Basic working knowledge of ASHRAE data & guidelinesAverage proficiency with MS Project scheduling programAverage proficiency with MS Access or other database programsAbove average proficiency with MS Excel & WordAbove average proficiency with InternetAbove average verbal & writing skillsAbove average organizational skills in handling & archiving technical data Recommended that the candidate have bachelors degree in Mechanical Engineering, Construction Management, Other Engineering Disciplines (Civil, Industrial, or Structural), and/or 5 years industry experience as a Construction Project Engineer. Candidate should be able to demonstrate experience with project administration, project scheduling, productivity analysis, project cost control accounting, plus equipment & material procurement. Company offers competitive benefits including 401-K, health, dental, and life and long-term disability. Includes, holiday, sick and vacation pay. We offer our employees a competitive salary and competitive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/DisabledEmployment Type: Full time Location: Anaheim, CA

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Responsible Engineer I to our team. If you enjoy working in a startup environment, and are passionate about developing leading-edge communications payloads and satellites, we would like to hear from you. In this position, you will be responsible for project engineering through all phases of the development process for both external customers and internally driven projects. The ideal candidate will have experience in project management, quality assurance, manufacturing of electronic and mechanical assemblies, supply chain, and organization across engineering functions. Experience in electronic assembly development is required, with space flight development preferred. You will utilize your practical engineering expertise to lead technical decisions with the project team, coordinate between engineering functional teams, estimate and manage project budgets and timelines for highly technical projects. Specific job functions will include developing project schedules, budgets, and risks and reporting to program and company leadership on a regular basis. You will coordinate activities across multidiscipline engineering teams and raise issues at the program level to ensure proper resourcing. You will interact with our customers as a technical leader. You will help drive complex development programs to a successful completion! The successful candidate will present engineering design review materials and status reports to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS: • A Bachelor of Science (BS) or Master of Science (MS) degree in a relevant engineering field (Electrical Engineering, Computer Engineering, or Computer Science) from an accredited university or institution., • 9 years of industry experience in a relevant engineering or project position., • Expert in project management tools such as Microsoft Project and Jira., • Technical leader with communication systems, specifically software defined radios, as well as systems of systems., • Experience mentoring less experienced project engineers and design engineers in associated discipline, • Thorough understanding of space systems engineering processes from concept to production. Specifically, understanding of the space system design life cycle., • Experience in driving complex electrical/software/mechanical development efforts to completion., • Excellent organizational skills., • Excellent written and verbal communication skills., • High energy and a “get it done” attitude.PREFERRED EXPERIENCE:, • Experience in space avionics and payload development., • Experience designing electronic assemblies., • Experience at a startup company., • Experience with project management at an established company., • Experience with both Research & Development and New Product Development projects.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. As an Electrical Engineering Intern based at Rocket Lab's site in Long Beach, California, you will have the opportunity to support the Avionics Design team testing simulations and electrical hardware design of modules that power and run our spacecrafts. The Avionics Design team at Rocket Lab Space Systems develops hardware for the power and control of our spacecraft! WHAT YOU'LL GET TO DO • As an intern, you will work closely with your mentor and other employees within the department to apply your knowledge and grow your skills both technically and professionally, • Work with a fast-paced group of professionals to apply engineering and industry concepts to solve real challenges, • Attend frequent 1:1's with mentors and supervisors to facilitate success and learning while providing progress updates, • Enjoy tech talks and network with other interns and employees through social and professional events YOU'LL BRING THESE QUALIFICATIONS Ideal candidates will thrive in ambiguity and are excited to work in small, high-performing teams that are focused on continued learning and growth. Success in this position will be measured by the knowledge and experience you bring to the role, your ability to lead development projects without supervision, and your ability to successfully collaborate across teams to deliver results. • Must be enrolled in a bachelor's, master's or doctorate degree program in an engineering, computer engineering, computer science, electrical engineering, physics or math discipline and have at least one semester of school remaining post internship, • GPA of 3.0 or above, • 3+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) THESE QUALIFICATIONS WOULD BE NICE TO HAVE • GPA of 3.5 or above, • 6+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable), • Experience with a schematic capture tool (preferably Altium), • Experience building custom circuits, • Experience in PCB/PCBA layout design, • Familiarity with electronics test equipment such as multimeters, and oscilloscopes, • Knowledge of programming/scripting languages: C/C++, Python, VHDL, Verilog 5. ADDITIONAL REQUIREMENTS • Able to work full-time, on-site for a minimum of 12 consecutive weeks beginning January, February, or March 2026. COMPENSATION AND OTHER BENEFITS • Pay Range CA: $28.00 USD Hourly, • You may be eligible for a stipend to subsidize relocation costs Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$28—$28 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description About Spokeo: Join our mission to make the world more transparent with data. Spokeo is a people search engine that helps over 18 million monthly visitors reconnect with friends, reunite with families, and protect against fraud. Additionally, our 12 billion records and over 250 million unique profiles help business professionals locate people and assets, research criminal investigation subjects, and more. Founded in 2006, we have grown to a company of nearly 200 dedicated employees, with flexible work locations and an average tenure of 5.3 years. Find out why we were named a “Best Company” by Comparably for Women, Compensation, Happiest Employees, Company Perks & Benefits, and Work-Life Balance, as well as “Best CEO” for co-founder Harrison Tang. About this Opportunity We are seeking a highly skilled Senior Machine Learning Engineer to join our dynamic AI team. This role will design, develop, and deploy scalable machine learning models that power our cutting-edge products. It will work closely with data scientists, software engineers, and product teams to translate business needs into high-impact AI solutions. Initially, this role will focus on transitioning our entity resolution system from a rule-based approach to a robust, ML-driven pipeline. Work will include tasks such as developing pairwise matching models, feature engineering for identity signals, and setting up training and inference workflows at scale. For later phases, the role may also take ownership of building models for selecting the most accurate or canonical attributes for a given individual. What You’ll Do: • Develop, deploy, and maintain end-to-end machine learning pipelines., • Design, develop, and optimize machine learning models, including data preparation, feature engineering, model training, evaluation, and updates., • Collaborate cross-functionally with other software engineers, data scientists, and product managers to productionize and manage ML models., • Stay current with the latest state-of-the-art research and advancements in AI and machine learning (ML). Apply innovative techniques as needed., • Have at least a completed Bachelor’s degree in Computer Science, Mathematics, Electrical Engineering, or Materials Science. Those with more advanced degrees in the mentioned fields are welcome., • At least 7 years of professional experience in machine learning and data science., • Solid foundation in machine learning algorithms., • Extensive experience with Python and ML frameworks (e.g., Scikit-learn, XGBoost, SparkML, PyTorch, TensorFlow)., • Experience building end-to-end ML pipelines on cloud platforms (AWS, GCP, Azure), including feature engineering, training, validation, evaluation, and deployment. Spokeo offers a bonus program, equity plans, and 401K. Once a year, we do a discretionary, merit-based salary increase. Additional benefits include 100% medical/dental/vision coverage and unlimited employee PTO. Spokeo extends written offers to candidates who successfully complete their selection process. Spokeo’s offers include a base salary, participation in a company bonus program, stock options, and comprehensive benefits. A final offer will depend on several factors, including, but not limited to, marketplace competition, job leveling, the candidate’s experience, skills, etc. Privacy Notice for Candidates: Spokeo is an equal-opportunity employer. Applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status. Spokeo fosters a business culture where ideas and decisions from all people help us grow, innovate, create the best products, and be relevant in a rapidly changing world. Recruiters or staffing agencies: Spokeo is not obligated to compensate any external recruiter or search firm who presents a candidate or their resume or profile to a Spokeo employee without 1) a current, fully executed agreement on file, and 2) being assigned to the open position (as a search) via our applicant tracking solution. #LI-Remote

Job DescriptionDescriptionAs an RF Hardware Verification Engineer, your core responsibility will be to drive characterization and verification of next-generation radio, filter, and antenna products. You will design and own key performance indicators across a range of products and develop automated scripting and processes for collecting data. You will work with RF hardware and software engineers, test engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You will work on uplink and downlink radios up to 32GHz, GNSS receivers, passive RF components, and analysis for desense and coexistence. Responsibilities • Develop and maintain RF performance matrices (KPI frameworks) for radios, filters, up and downconverters, and antennas., • Implement scripts to control RF test equipment including spectrum analyzers, network analyzers, antenna test infrastructure, power meters, power supplies, and other devices., • Plan and execute verification campaigns to evaluate early prototype device performance against desired specifications., • Analyze RF data to generate reports, detail compliance with internal and regulatory specs, and advise designers on improvement opportunities., • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • Experience writing scripts for wireless systems or hardware testing infrastructure, • Experience developing KPI frameworks for RF products, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, and software defined radios, • Proficient in testing and troubleshooting RF devices, • 2+ years writing Python, LabView, TILE, or other automation software, • Strong understanding of RF system parameters such as channel power, EVM, modulation, and bandwidth, • Experience writing and documenting RF test procedures for use by other engineers and technicians, • Strong software debugging skills Preferred Skills and Experience • Experience testing and troubleshooting FPGAs or other digital systems, • Familiarity working with embedded Linux, • Experience with common RF protocols like SRS4, DVBS-II, and CCSDS, • Experience with GNU radio flowgraph development and troubleshooting, • Familiarity with satellite spectrum licensing laws, agencies, and standards, • Experience testing RF devices for regulatory compliance, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription Here's what you can expect: • To work on new and existing web applications, flexibly moving between frontend code and the supporting backend implementation., • Be involved in product and technical decisions as we chart a course for Addressable's future, • Design, build, and maintain web services, • Build new user-facing features, • Implement monitoring and alerting to understand the health of the system and to diagnose issues, • Drive incremental improvements across multiple roadmap items, • Have 5+ years of professional software development experience in one or more general purpose languages and are specifically proficient in React with JavaScript., • Are experienced with React design patterns and best practices, and understand how to apply them to new and existing development., • Are comfortable moving between backend and frontend development work, based on the needs of your team., • Approach your work with curiosity, embrace your learning zone, and are fueled by a desire to expand your impact., • Routinely take on complex projects that can span multiple months., • Focus on connecting business and customer value to your work., • Take on a leadership role in projects that you are executing on helping the team understand tradeoffs and execute to business needs., • Weigh tough tradeoffs and bias towards action and execute strategically. Benefits & Inclusion • Insurance: We pay 100% of employee-only medical, dental, and vision coverage and 50% of the premium for your spouse and dependents. You’ll have access to live insurance experts to advise you on your plan selection, and any issues you have with your insurance. As we grow, we’re constantly evaluating ways to enrich our benefits offerings., • Financial Wellness: We offer a 401k plan and financial wellness platform.

Job Description Supplier Quality Engineer

Job Description At TWG Group Holdings, LLC (“TWG Global”), we drive innovation and business transformation across a range of industries—including financial services, insurance, technology, media, and sports—by leveraging data and AI as core assets. Our AI-first, cloud-native approach delivers real-time intelligence and interactive business applications, empowering informed decision-making for both customers and employees. We prioritize responsible data and AI practices, ensuring ethical standards and regulatory compliance. Our decentralized structure enables each business unit to operate autonomously, supported by a central AI Solutions Group, while strategic partnerships with leading data and AI vendors fuel game-changing efforts in marketing, operations, and product development. You will collaborate with management to advance our data and analytics transformation, enhance productivity, and enable agile, data-driven decisions. By leveraging relationships with top tech startups and universities, you will help create competitive advantages and drive enterprise innovation. At TWG Global, your contributions will support our goal of sustained growth and superior returns, as we deliver rare value and impact across our businesses. The Role We’re looking for a hands-on Senior Identity & Security Engineer (VP) to design, implement, and maintain secure, scalable identity and access management solutions for our growing enterprise and customer environments. You’ll work closely with internal teams and customers to design and implement secure identity architectures, commercialize upcoming environments, and drive adoption of advanced security practices like RBAC, ABAC, and Zero Trust. This role requires expertise with Okta, modern identity frameworks, and cloud security architecture, plus the ability to partner directly with customers and internal stakeholders to deliver secure, reliable, and user-friendly access solutions. What you'll do: • Design and deploy identity platforms leveraging Okta and Entra ID (Azure AD), integrating adaptive authentication, automated lifecycle workflows, and advanced access policies., • Build and maintain granular RBAC and ABAC policies to enforce least-privilege access and enable Shift Left identity security practices., • Support the commercialization of new customer-facing identity environments., • Design secure, segmented network architectures (VPCs/VNets, subnets, security groups) to limit lateral movement and align with Zero Trust principles., • Integrate security controls into Infrastructure as Code (Terraform) to ensure secure-by-default deployments., • Implement secure application access via federation protocols (SAML, OAuth, OpenID Connect), MFA, and conditional access., • Serve as the primary identity security liaison with customers, ensuring environments meet security, compliance, and usability needs., • Collaborate with engineering, IT, and product teams to integrate identity solutions seamlessly into applications and services., • Lead access governance initiatives, including automated access reviews and segregation of duties., • Automate provisioning, deprovisioning, and access management workflows to improve efficiency and reduce risk., • Establish and maintain reusable Terraform modules for secure, scalable infrastructure., • 5+ years of experience designing and implementing identity platforms with Okta and Azure AD/Entra ID., • Strong background in RBAC/ABAC policy development, Zero Trust architecture, and cloud security best practices., • Hands-on experience with Infrastructure as Code (Terraform) and automated security workflows., • Knowledge of federation protocols (SAML, OAuth, OpenID Connect) and integrating identity into third-party services., • Ability to communicate complex technical concepts to both technical and non-technical stakeholders, including customers., • Experience with network segmentation, secure connectivity, and cloud-native networking (AWS, Azure, GCP)., • Familiarity with threat modeling frameworks (STRIDE, MITRE ATT&CK) and Shift Left security principles. This is an onsite position located at our offices in New York, NY or Santa Monica, CA. The expected base pay for this position is $200,000-$285,000. A discretionary bonus will be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits. TWG is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionSalary: $25/Hourly Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities • Assist team with General Contract and Subcontract administration, • Learn about Quality Control programs and how to coordinate actions to address problems, • Control of documents including but not limited to RFI postings and contract documents, • Distribute information required for construction to appropriate parties, • Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.), • Assist in preparation of a contract items list, • Research and suggest options on construction means, methods, and equipment, • Perform other duties as required or assigned Qualifications • Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field., • A strong desire to learn and develop new skills, • Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment * Excellent oral and written communication and interpersonal skills * Resourceful with strong problem solving and troubleshooting skills * Ability to work independently as well as collaborate on a team * Highly organized and detail oriented; able to prioritize and multi-task * While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing * The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Job DescriptionMANUFACTURING ENGINEERING INTERN (SUMMER 2026) Freeform is deploying software-defined, autonomous metal 3D printing factories around the world, bringing the scalability of software to physical production. Our proprietary technology stack leverages advanced sensing, real-time controls, and data-driven learning to produce digitally verified, flawless parts at unprecedented speed and cost. Our mission is to make the transformative power of 3D printing available to all industries at scale and unlock the future of innovation. As a Manufacturing Engineering Intern at Freeform, you'll be at the forefront of scaling production for high-performance metal 3D printed parts. You'll work with a talented engineering team from some of the world's most innovative companies across a range of projects to develop and refine the processes, tooling, and CNC machining workflows that enable precision manufacturing at speed and scale. This role is hands-on and fast-paced, ideal for someone eager to learn and contribute to the development of our autonomous metal 3D printing factories. You'll focus on optimizing post-processing and machining operations, helping to bridge the gap between R&D and production. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative individuals who love solving hard problems and creating amazing technology! Responsibilities: • Support the design and implementation of scalable manufacturing processes for new hardware and printed parts, • Assist with fixturing, test procedures, and post-processing steps to improve part flow through the factory, • Help develop documentation and process standards to support production scaling, • Build and iterate on tooling, jigs, and test setups for reliable, high-throughput production, • Identify bottlenecks and inefficiencies in part, material, and data flow- and work with cross-functional teams to improve them, • Support early production efforts and help transition R&D into high-rate manufacturing, • Contribute to CNC machining workflows, including programming, setup, and optimization of multi-axis operations for post-processing of printed parts Basic Qualifications: • Currently enrolled in a bachelor's degree in mechanical, aerospace, or manufacturing engineering from an ABET accredited university or college, • Hands on manufacturing or build experience from internships or engineering clubs such as FSAE, Baja SAE, solar car, rocket club, robotics club, or similar, • Experience working with hand tools, machinery, or complex hardware assembly Nice to Have: • Advanced degree (Master's, PhD) in mechanical, aerospace, or manufacturing engineering, • Experience with CNC machining, including 3 or 5-axis programming and/or setup, • Experience with metal additive manufacturing or precision post-processing, • Exposure to fixturing, DFM, or process validation, • Experience scaling early-stage R&D into production, • Familiarity with MRP/ERP tools and lightweight production tracking systems, • Familiarity with manufacturing process development in a fast-paced hardware environment, • Ability to translate high-level engineering goals into practical factory processes, • Comfortable working in fast-paced, ambiguous environments and iterating quickly (comfortable building the plane as we fly it), • Strong communicator who collaborates across disciplines and proactively seeks support when needed, • Willing to take ownership of tasks big and small, with a hands-on, problem-solving mindset, • Strong work ethic with a refuse-to-fail mindset, • Demonstrated indicators of excellence and/or achieving success against adversity (i.e. top academic performance, leadership in engineering clubs, first-generation college student, or other examples of resilience and achievement) Location: • We are located in Hawthorne, CA in a 35,000 square foot, state-of-the-art facility featuring large open spaces for team collaboration, R&D, and production, as well as easy access to the 405, 105, and 110 freeways. Our facility is in the heart of Los Angeles' vibrant emerging tech ecosystem alongside many other high growth startups and enterprises. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions, • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology, • Compensation and Benefits, • The compensation for this role is $30/hour, • Relocation assistance, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. What To Expect: • Thank you for your interest in our internship opportunity! We truly appreciate your application and enthusiasm to join our team. Please note that our interview process will begin after we attend university career fairs in early fall. The process will include 2-3 rounds of virtual interviews. We anticipate wrapping up the interview process by late October/early November.