Engineering jobs in Buffalo, New York - Page 3Create job alerts

We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non‑merit factor. A

Job Description About LaBella LaBella Associates is a multi-disciplinary consulting firm with more than 2,200 professionals across over 30 offices in 13 states as well as Europe. We are looking to expand in our Upstate New York offices by adding a Senior Environmental Engineer to focus on brownfield projects. We are seeking a NY-licensed engineer who is inspired by complex projects, technical leadership, and the opportunity to mentor and coach junior staff. Position Overview We are looking for a highly motivated Senior Environmental Engineer (PE) to lead environmental investigation and remediation projects and provide technical expertise. The ideal candidate is technically strong, passionate about mentorship, and excited by opportunities to work on impactful brownfield remediation and redevelopment projects. Duties: Technical Leadership • Manage and execute Phase II Environmental Site Assessments (ESAs), NYSDEC Brownfield Cleanup Program (BCP) and USEPA Brownfield projects, including Site Characterizations, Remedial Investigations, Alternatives Analyses, and Remedial Design., • Develop and optimize engineering controls, automation, and system performance monitoring programs for new and existing remedial systems., • Lead design and feasibility evaluations for remedial technologies such as:, • Excavation/off-site disposal, • In-situ chemical oxidation/reduction, • Thermal remediation, • Sub-slab depressurization systems, • PFAS treatment systems, • Oversee field programs including soil, groundwater, soil vapor, and surface water sampling., • Analyze and present field and laboratory data; prepare and review technical reports., • Support litigation and expert witness assignments as needed., • Mentor and guide junior engineers, geologists, and environmental scientists., • Prepare proposals, scopes of work, cost estimates, and project budgets., • Maintain strong relationships with regulatory agencies. Requirements • B.S. in Chemical, Environmental, or related Engineering discipline., • New York State Professional Engineer (PE) license., • 20+ years of experience managing environmental investigation and remediation projects., • Demonstrated experience with BCP, Phase II ESAs, and remedial design., • Excellent communication, organizational, and problem-solving skills., • Ability to work both independently and within a multidisciplinary team., • Valid NYS driver’s license with a clean driving record. Why Join LaBella? • Candidates demonstrating strong leadership, performance, and commitment will be considered for shareholder opportunities within the firm., • Opportunity to help shape our growing brownfield practice., • Challenging, high-profile projects that support continuous technical development., • A collaborative and flexible environment that values innovation, autonomy, and leadership., • Hybrid working environment, as needed., • Competitive compensation, comprehensive benefits, and strong career advancement potential. Salary Range: ($130,000-$155,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionJob Title: Controls Engineer Job Description The primary role of a Controls Engineer is to initiate control system design based on written sequences of operation. This position involves designing complex piping and wiring diagrams and providing technical support across various control systems projects. Responsibilities • Engineer and design pneumatic, electrical, and hydraulic piping diagrams., • Design electrical control panels and programmable logic controller (PLC) software., • Design programmable human-machine interface (HMI) software., • Debug and provide start-up support for control systems., • Provide technical support for the installation of tools and equipment., • Offer technical support for training plant personnel., • Proficiency in programmable machine controls hardware and software., • Experience with Servo drive hardware and software., • Proficiency with AutoCAD., • Familiarity with basic electrical and safety standards., • Ability to supervise., • PLC Programming Experience (Allen-Bradley 5000 or Studio 5000)., • HMI Programming Experience (Preferred Rockwell FactoryTalk View)., • Ability to read and troubleshoot electrical schematics and machine control circuits., • Minimum of 3 years’ experience troubleshooting controls-related automation equipment breakdowns., • Basic Fanuc Robotics Experience., • Problem-solving and analytical skills in a high-volume manufacturing environment., • Strong understanding of Ethernet/IP industrial networks., • Prior automotive or industrial automation experience preferred., • Understanding and programming of servo drives, motion control, and VFDs., • Strong communication and interpersonal skills., • Leadership in planning, scheduling, and coordinating work with trades and contractors., • Ability to work flexible hours or rotate shifts as required., • Experience with machine controls, robotics, test systems, PLC, instrumentation, and vision systems., • Support experience in manufacturing environments. The work environment involves daily team meetings, smaller team carry-over meetings, and brief stand-up meetings to discuss top priority items and production needs. The team consists of approximately 12 people, with interactions across production, quality, and maintenance departments. There is a chance for extension and possibility of conversion to a direct position. Flexibility in working hours and shift rotations may be required to align with plant operations. Job Type & Location This is a Contract position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title Senior Electrical Engineer – Modular Data Centers Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. Position Overview GTI is seeking a Senior Electrical Engineer to design the electrical architecture of modular data center power systems supporting high availability computing environments. Key Responsibilities • Design electrical systems for modular data centers including UPS systems, switchgear, and power distribution units, • Develop single line diagrams, electrical schematics, and cable schedules, • Design redundant power architectures such as N+1 and 2N systems, • Integrate UPS systems, batteries, generators, and electrical distribution infrastructure, • Develop monitoring and control systems for critical power infrastructure, • Coordinate electrical design with mechanical cooling systems and equipment layouts, • Support commissioning and factory testing of modular data center systems, • Develop electrical documentation supporting production and field deployment Required Qualifications • Bachelor’s degree in Electrical Engineering, • 8+ years of experience in critical power or data center electrical design, • Experience with UPS systems, switchgear, and power distribution infrastructure, • Experience developing electrical schematics and production documentation Preferred Qualifications • Experience designing modular data centers or prefabricated critical power systems, • Familiarity with Tier data center reliability architectures, • Experience integrating generator backup systems GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace.

Job Description About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards, • Must have a valid driver’s license with a clean driving record Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required., • Perform essential job functions using proper techniques that may include lifting, carrying, pushing, and pulling tools, equipment, and materials., • Lift and carry items weighing up to 50 pounds, with or without reasonable accommodation., • Engage in frequent standing, walking, bending, stooping, kneeling, crouching, and reaching during field assignments., • Work in a variety of field environments, including confined spaces, uneven surfaces, and varying weather conditions., • Follow all company safety policies and training requirements, including the use of personal protective equipment (PPE)., • Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis., • Designated as Authorized Person for LOTO. Travel: • 50% Work Location and Status: • Contract role, Hybrid role based out of the NY, MA, or NC areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description Process Piping Engineer — Pipe Fitting Manufacturing Location: Buffalo, NY Department: Engineering FLSA Status: Exempt About GTI GTI Fabrication designs and manufactures custom modular enclosures, energy systems, and industrial structures for energy, defense, and heavy-industrial markets. As GTI scales production and expands our product portfolio, the alignment between current & future customer demand and operational capacity has become critical to our long-term success. Role Summary The Process Piping Engineer is responsible for the engineering, design, and process development of pipe fitting manufacturing operations. This role supports new product introduction (NPI) from concept through production launch, ensuring manufacturing processes meet quality, throughput, cost, safety, and code compliance targets. The engineer partners closely with product engineering, quality, tooling, supply chain, production, and customer technical teams to bring new pipe fitting products to market and drive continuous improvement in existing manufacturing lines. Core Responsibilities Process Engineering & NPI Support Develop and own manufacturing process designs for pipe fitting production, including forming, machining, joining, casting/forging interfaces, surface treatment, and assembly operations. Define process flows, routings, and work instructions from prototype through production readiness. Support design-for-manufacturability (DFM) reviews, identifying opportunities to reduce complexity, material waste, cycle time, and cost. Define and document process assumptions, operating windows, tooling requirements, and acceptance criteria for new fitting designs. Specifications & Standards Author and maintain process specifications covering materials, forming and joining methods, surface treatment, cleaning, coating, marking, and inspection criteria for pipe fittings. Select materials and manufacturing methods appropriate to product requirements (e.g., carbon steel, stainless, copper alloys, HDPE; forged, cast, machined, grooved, threaded, flanged), balancing performance, manufacturability, and lifecycle cost. Ensure compliance with applicable product and manufacturing standards (e.g., ASME B16 series, MSS SP standards, ASTM material specs, applicable OSHA/shop safety requirements) and coordinate with customers and third-party agencies on qualification and certification requirements. Integration & Delivery Coordinate cross-functionally with product engineers, quality, tooling and fixturing, supply chain, and production supervisors to ensure process intent is realized on the shop floor. Support procurement by developing BOMs, tooling and equipment requirements, RFQ packages, and technical evaluations of supplier proposals. Drive process design reviews (concept, pilot, pre-production, production release), resolve NCRs and process deviations, and manage process-related changes during ramp. Quality, Risk, and Production Launch Support Define QA/QC requirements including in-process inspection checkpoints, dimensional verification, pressure/leak test requirements, surface and cleanliness standards, and first article inspection (FAI) criteria. Support production launch by developing or reviewing process FMEAs, control plans, operator work instructions, and pre-production build checklists. Participate in root-cause investigations for manufacturing escapes (dimensional non-conformance, leaks, surface defects, tooling failures) and implement corrective and preventive actions. Continuous Improvement Standardize and modularize manufacturing processes to improve repeatability, speed to launch, and cost competitiveness. Capture lessons learned from NPI programs and update process standards, specifications, and design tools accordingly. Identify and drive capital and tooling investments that improve throughput, quality, or safety. Qualifications Required • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related discipline., • 5+ years of process or manufacturing engineering experience, with significant exposure to pipe fitting, valve, or related metal component manufacturing., • Proficiency developing process flows, work instructions, tooling specifications, and inspection criteria., • Demonstrated ability to support new product launches from prototype through production readiness., • Experience with pipe fitting manufacturing processes (forging, casting, CNC machining, threading, grooving, end-facing)., • Familiarity with ASME B16 series, MSS SP standards, and ASTM material requirements for fittings., • Experience with GD&T, CMM inspection, and first article inspection processes., • Exposure to lean manufacturing, Six Sigma, or structured problem-solving methodologies., • Strong fundamentals in manufacturing processes, materials, and metrology., • Practical, floor-oriented understanding of tooling, fixturing, and trade/operator sequencing., • Ability to manage multiple NPI programs simultaneously and drive closure on open technical items., • Clear technical communication with production teams, suppliers, customers, and internal stakeholders., • Process flow diagrams and manufacturing routings., • Tooling and fixturing specifications and procurement packages., • Process FMEAs, control plans, and operator work instructions., • Material and process specifications, inspection and test standards., • NPI milestone reviews, production readiness assessments., • NCR disposition, RCA documentation, and corrective action plans., • Lessons learned and process standard updates.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Role Title: Quality Engineer Reports To: Quality Manager Role Summary The Quality Engineer aligns quality initiatives with GTI’s strategic objectives and ISO 9001 Quality Management System (QMS) requirements. This role ensures quality processes are defined, implemented, monitored, and continually improved to meet customer, regulatory, and business requirements. The Quality Engineer applies risk-based thinking, drives Root Cause Corrective Actions (RCCA), and uses data-driven insights to improve operational performance, reduce risk, and protect the GTI brand. Core Responsibilities • Support QMS effectiveness by monitoring, analyzing, and improving assigned quality and production processes in alignment with ISO 9001 requirements., • Provide real-time analytics and data insights to support informed, risk-based decision-making., • Develop and maintain dashboards, KPIs, and trend analyses used for operational reviews and Management Review inputs., • Identify, assess, and mitigate risks within production and support processes using documented risk tools (e.g., PFMEA, risk registers, control plans)., • Develop, implement, and maintain Quality Plans and control strategies based on customer, regulatory, and internal requirements., • Drive Root Cause Corrective Actions (RCCA), ensuring actions are implemented, documented, and verified for effectiveness., • Ensure Quality Assurance through defect prevention via standardization, training support, process validation, and built-in quality methods., • Implement Quality Control activities to detect nonconforming outputs through inspections, testing, monitoring, and final verification., • Support control of nonconforming outputs, including MRB participation, rework verification, and disposition documentation., • Support internal audits, corrective actions, and continuous improvement activities related to assigned processes., • Maintain quality-related documented information and records to ensure traceability, data integrity, and audit readiness., • Escalate quality risks, systemic issues, or compliance concerns to Quality leadership as appropriate. Key Deliverables • Documented Quality Plans and Control Plans aligned with customer, regulatory, and ISO 9001 requirements., • Risk assessments and mitigation actions for production, process, and change activities., • RCCA documentation with verified effectiveness and trend analysis., • KPI dashboards and quality performance reports supporting operational and Management Reviews., • Inspection, test, nonconformance, and verification records demonstrating product conformity. Decision-Making Authority • Review and approval of deviation requests in accordance with established procedures., • Definition, improvement, and optimization of quality measurement and monitoring systems within assigned scope., • Authority to stop or escalate production or process issues that may impact product conformity, safety, or compliance. Key Cross-Functional Interactions • Safety: Policy alignment, training support, and reduction of safety-related risks., • Production: RCCA, Quality Control activities, Quality Audits, MRB participation, rework verification, and process support., • Engineering: Process improvement initiatives, change management support, and waste elimination., • Supply Chain: Material availability, material conformity, clear-to-build status, and escalation of supply-related outages., • Purchasing: Supplier quality issues, cost recovery, vendor credits, and coordination of quality-related payment concerns., • Business Unit Managers / Program Managers (BUMs/PMs): Project tracking, customer quality performance reporting, and issue escalation., • Human Resources: Coordination related to training records, payroll impacts tied to quality activities, and benefits accounting as applicable. Success Metrics The effectiveness of the Quality Engineer role will be measured using the following metrics: • Quality Defect Rates, • Internal defect rates (scrap, rework, first-pass yield), • External defect rates (customer complaints, returns, warranty), • Cost of Poor Quality (COPQ), • Scrap, rework, concessions, warranty, and recovery costs, • Demonstrated reduction or control of COPQ through corrective actions, • Customer Quality Performance, • Customer quality metrics (PPM, scorecards, complaints), • Timeliness and quality of customer responses and corrective actions, • Root Cause Corrective Action (RCCA) Performance, • Timeliness of issue reporting, • On-time closure of corrective actions, • Verification of corrective action effectiveness, • Audit Schedule and Compliance, • Adherence to internal and external audit schedules

Job Description Job Title Senior Mechanical Engineer – Modular Data Centers Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI engineers modular data center infrastructure that integrates structural enclosures, cooling systems, power distribution equipment, and server infrastructure into factory-built modular systems. These prefabricated modules enable faster deployment of computing capacity for hyperscale, enterprise, and edge computing environments. Position Overview GTI is seeking a Senior Mechanical Engineer to design modular data center enclosures and cooling systems supporting high-density computing environments. Key Responsibilities • Design structural enclosures and modular steel assemblies for prefabricated data centers, • Develop equipment layouts supporting racks, power distribution equipment, and cooling systems, • Design cooling airflow systems supporting high-density computing loads, • Perform CFD modeling to optimize airflow and thermal performance, • Design HVAC integration including DX systems, chilled water systems, and airflow containment, • Perform structural analysis for transport, lifting, and installation loads, • Develop manufacturable designs for factory-built modular infrastructure, • Coordinate mechanical systems with electrical power distribution infrastructure, • Support prototype builds and factory testing Required Qualifications • Bachelor’s degree in Mechanical Engineering, • 7+ years of experience designing HVAC systems, industrial enclosures, or modular infrastructure, • Strong experience with thermal management and airflow analysis, • SolidWorks experience designing large structural assemblies Preferred Qualifications • Experience with data center cooling systems, • Experience designing prefabricated infrastructure or modular buildings, • Experience with high-density computing environments GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace.

Job Description Job Title Senior Electrical Engineer – Generator Systems (GenSet) Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs and manufactures modular generator systems supporting data centers, utilities, and industrial infrastructure. These systems integrate generators, switchgear, paralleling controls, and electrical distribution into modular power platforms designed for high reliability and rapid deployment. Position Overview GTI is seeking a Senior Electrical Engineer to design generator electrical systems including power distribution, generator controls, and paralleling switchgear. Key Responsibilities • Design electrical systems supporting generator power modules, • Develop single line diagrams, wiring schematics, and electrical layouts, • Integrate generators with switchgear, transfer switches, and protection systems, • Support generator synchronization and load sharing systems, • Design monitoring and control systems for generator operation, • Develop grounding and protection coordination strategies, • Support commissioning and testing of generator power systems, • Coordinate electrical design with mechanical packaging and enclosure design, • Develop production documentation supporting modular generator manufacturing Required Qualifications • Bachelor’s degree in Electrical Engineering, • 8+ years of experience in power systems or generator electrical design, • Experience with electrical distribution systems and protection devices, • Experience designing industrial control systems and electrical schematics Preferred Qualifications • Experience with standby power or data center backup power systems, • Experience integrating generator controls and paralleling switchgear, • Experience with microgrid or hybrid power systems GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace.

Job Description Job Title Senior Mechanical Engineer | CFD Engineer | Thermal Systems Engineer – BESS & Modular Infrastructure Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI Energy, a division of GTI Fabrication, designs, engineers, and manufactures complex modular systems supporting battery energy storage systems (BESS), modular data center infrastructure, power generation platforms, and industrial energy systems. Our products integrate structural, mechanical, thermal, and electrical systems into highly engineered enclosures operating in demanding real-world environments. GTI operates in a fast-paced, engineered-to-order manufacturing environment where thermal performance, airflow management, manufacturability, and system reliability are critical to product success. Our engineering teams develop modular infrastructure products that must operate safely and efficiently under high thermal loads, constrained packaging conditions, and extreme ambient environments. Position Overview GTI Energy is seeking a Senior Mechanical Engineer with deep Computational Fluid Dynamics (CFD) and thermal systems expertise to lead airflow, cooling, and thermal management design across modular energy and infrastructure products. This role will focus heavily on CFD-driven product development for enclosed systems including BESS platforms, modular data centers, power distribution equipment, and power generation systems. This is not a traditional HVAC or commercial building engineering role. GTI is specifically seeking engineers who have designed cooling systems for enclosed industrial equipment operating under real-world constraints including space limitations, airflow recirculation, heat rejection challenges, manufacturability, vibration, acoustics, and serviceability. The ideal candidate has experience modeling and optimizing thermal performance for battery systems, power electronics, generator enclosures, industrial skids, switchgear systems, or modular data center infrastructure where thermal performance directly impacts product reliability and operational uptime. Key Responsibilities CFD Modeling & Thermal Analysis • Lead CFD analysis and thermal modeling activities for enclosed industrial systems and modular infrastructure products, • Develop airflow simulations for BESS enclosures, modular data centers, power electronics, electrical rooms, and integrated equipment platforms, • Analyze airflow distribution, pressure drop, temperature gradients, recirculation zones, hot spots, and thermal rejection performance, • Validate system performance under worst-case operating and ambient conditions, • Design and integrate cooling systems based on actual equipment heat loads and operational requirements, • Develop enclosure airflow strategies including intake/exhaust placement, ducting, baffles, plenums, circulation paths, and pressure balancing, • Select and integrate off-the-shelf cooling equipment including HVAC units, heat exchangers, fans, chillers, and thermal management systems, • Design for real-world operating environments including dust, humidity, vibration, solar loading, and extreme ambient conditions, • Support mechanical packaging and enclosure design activities related to thermal system integration, • Coordinate thermal system layouts with structural, electrical, and manufacturing constraints, • Develop CAD models, engineering drawings, and BOMs supporting thermal and mechanical integration, • Support prototype testing, heat runs, thermal validation, and system troubleshooting activities, • Correlate CFD models with physical testing data and refine simulations accordingly, • Analyze field performance data to identify opportunities for thermal improvement, • Partner closely with Electrical Engineering, Structural Engineering, Manufacturing Engineering, NPI, and Operations teams, • Support customer technical discussions related to cooling performance and thermal design strategy, • Work with manufacturing teams to ensure thermal solutions align with fabrication and assembly capabilities, • Drive DFM initiatives focused on scalable thermal system integration and assembly efficiency, • Reduce unnecessary complexity while maintaining thermal performance and reliability targets, • Standardize cooling architectures, airflow strategies, and thermal design methodologies where appropriate, • Serve as a subject matter expert for CFD analysis, airflow management, and thermal systems engineering, • Mentor junior engineers and support development of internal thermal engineering capability, • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 6–12+ years of experience in thermal systems engineering, CFD analysis, or mechanical product development, • Strong hands-on experience performing CFD analysis for enclosed industrial systems or thermal-critical products, • Experience supporting BESS, modular data centers, power systems, or energy infrastructure products, • Experience validating CFD models through physical testing and heat-run correlation, • Background in enclosure design, sheet metal, weldments, or industrial packaging, • Familiarity with UL requirements, environmental testing, and thermal compliance standards, • Experience operating in high-growth manufacturing or engineered-to-order environments, • Master’s degree with concentration in thermal sciences, heat transfer, or fluid dynamics preferred, • Experience designing cooling systems for battery systems, power electronics, industrial skids, generator enclosures, modular data centers, switchgear, or similar equipment, • Strong understanding of airflow management within enclosed systems, • Experience with CFD tools such as ANSYS Fluent, Icepak, 6SigmaET, SolidWorks Flow Simulation, or similar platforms, • Opportunity to solve complex real-world thermal engineering challenges tied to AI infrastructure, energy storage, and mission-critical power systems, • High-impact role influencing product architecture, reliability, and system performance, • Collaborative engineering environment with strong manufacturing integration, • Exposure to advanced modular infrastructure products and large-scale industrial systems, • Significant career growth opportunity within one of the fastest-growing manufacturers in the United States

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description Job Title Senior Electrical Engineer Location Buffalo, NY (On-Site or Hybrid depending on program needs) Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and industrial markets. GTI delivers fully integrated, engineered-to-order solutions including Battery Energy Storage Systems (BESS), generator-backed power systems, and modular data centers manufactured in-house. Position Overview GTI is seeking a Senior Electrical Engineer to lead electrical system design and development across advanced modular programs, including BESS, GenSet-based power systems, and modular data center infrastructure. This role owns electrical architecture, schematic development, and technical execution for complex power and control systems operating across varying voltage levels and power capacities. The Senior Electrical Engineer serves as a technical authority, working closely with mechanical engineering, manufacturing, supply chain, and project teams to ensure designs are safe, scalable, manufacturable, and compliant with applicable standards. This role requires strong experience in power distribution, control systems, and electrical documentation within industrial or energy-focused environments. Key Responsibilities Electrical System Design & Architecture • Lead electrical system design for Battery Energy Storage Systems (BESS), generator systems, and modular data center power infrastructure, • Develop electrical architectures supporting varying levels of power generation, storage, and distribution, • Design AC and DC power systems, including low-voltage and medium-voltage applications as required by project scope, • Create and maintain detailed electrical schematics, wiring diagrams, and single-line diagrams using SolidWorks Electrical or equivalent, • Develop panel layouts, cable schedules, and interconnection diagrams, • Ensure electrical documentation is complete, accurate, and production-ready, • Design electrical systems integrating battery systems, inverters, transformers, generators, switchgear, and protection devices, • Support parallel operation, load sharing, and backup power configurations, • Design control and monitoring interfaces between power systems and control platforms, • Support electrical design for modular data center infrastructure including power distribution units (PDUs), UPS systems, generators, and switchgear, • Design redundant and fault-tolerant power architectures (e.g., N+1, 2N), • Partner with Mechanical Engineering to ensure electrical designs integrate with enclosures, thermal systems, and physical layouts, • Support Manufacturing Engineering with design-for-manufacturability and build strategy input, • Provide technical guidance to production teams during build, test, and integration, • Ensure designs comply with applicable electrical codes and standards such as NEC, UL, IEC, and project-specific requirements, • Support UL-listed and customer-certified system designs, • Serve as a technical lead on assigned programs, • Support project planning, technical risk identification, and issue resolution, • Bachelor’s degree in Electrical Engineering or related discipline, • 8+ years of experience in electrical engineering roles within industrial, energy, or infrastructure environments, • Strong experience designing power systems across varying voltage and power levels, • Proven experience developing electrical schematics and documentation, • Experience with power generation, energy storage, or critical power infrastructure, • Experience with Battery Energy Storage Systems (BESS), • Experience with generator systems, paralleling switchgear, and backup power architectures, • Experience supporting modular data centers or mission-critical infrastructure, • Proficiency with SolidWorks Electrical, • Experience supporting UL-listed or code-compliant system designs, • Prior experience in modular, containerized, or engineered-to-order manufacturing environments

Job DescriptionJob Title: Project Engineer-MechanicalLocation: Buffalo, NY Hire Type: Direct HirePay Range: $95,000 - $125,000Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Thursday, 6am – 4pmRecruiter Contact: Sean Pebbles, 716-256-1259, & Scope:Positional OverviewThe Imagine Group is recruiting for a Project Engineer-Mechanical on behalf of our client, a leading global manufacturer and supplier of high-performance copper and copper-alloy materials in Buffalo, NY, supporting a wide range of industries including automotive, electronics, and energy. The organization operates advanced production facilities that manufacture strips, sheet, and other semi-finished metal products used in electrical components, heat exchangers, and industrial applications. Known for its focus on innovation and sustainable manufacturing, the company partners with customers to deliver reliable materials that support modern infrastructure and emerging technologies. In this role, you will be responsible for engineering and project management of capital projects as necessary to support plant process improvements, equipment and maintenance upgrades funded by capital investment. This effort contributes to improved plant performance and profitability through optimization of engineering effectivenessRole & Responsibility:Tasks That Will Lead to Your Success • Engineer and design modifications to existing equipment to improve production and reduce maintenance costs., • Direct and coordinate major overhauls and rebuilds to improve quality and yield. Maintain minimum downtime and production delays., • Communicate and coordinate equipment maintenance requirements and activities with the maintenance department regarding manpower and downtime requirements, acquiring input form equipment operators and maintenance staff., • Oversee preventive maintenance activities, such as long-range planning to ensure maximum production and utilization of production equipment., • Coordinate with contractors on design and implementation of new equipment regarding required maintenance and replacement parts to ensure optimal utilization and longevity of equipment., • Maintain equipment to comply with local, state and federal government and insurance company regulations., • Direct and coordinate bargaining unit employees as required. Promote safe and healthy workplace. Ensure optimal labor relations by adhering to the contract and Company policies. Maintain good housekeeping and organization within the department.Skills & ExperienceQualifications That Will Help You Thrive, • BS/BT Mechanical Engineering (4-year degree), • Minimum 5 years in heavy manufacturing/industrial environment, including experience in hydraulics, maintenance systems, troubleshooting and project management., • Must be proficient in CAD, with AutoCAD experienced preferred., • Must be proficient in writing both technical equipment specifications and installation specifications, reviewing and evaluating vendor proposals and implementing multi-discipline projects with minimal direction and engineering assistance., • Must have good communications skills and actively solicit input from all stakeholders on potential projects to ensure each project is successfully completed and meets expectations., • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program. Mechanical Engineering

Job DescriptionDescription: Carrier Processing Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment and custom fluid solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a Project Engineer at our Tonawanda, NY location to support the Hebeler-Howard Marten (HHM) division. This full-time, exempt position is responsible for the coordination and completion of assigned engineering projects including analyzing customer requirements for equipment selection. Please visit to see the products and capabilities of HHM. Schedule Monday-Friday, 8 a.m.- 5 p.m., Some remote work is possible. Responsibilities • Aid in project administration from beginning to end., • Complete/support completion of cost estimates for new opportunities and sales efforts., • Analyze customer project requirements and communicate to engineering and production., • Direct and manage project development from beginning to end., • Single point of accountability to oversee, direct and manage deliverables of projects to customer from end to end of project., • Collaborate with vendors/suppliers on pricing, productivity ideas and material substitutions., • Approve vendor/supplier deviations., • Create Design Change Notice(s) (DCN) for customer driven scope changes to internal teams., • Track project scope changes and communicate costs to customers for review/approval., • Work with Syteline ERP System or other manufacturing software to create /load part numbers and material routings, update job information and pricing as requirements change., • Act as liaison between CPEG customers and all departments within CPEG., • Facilitate internal Design Review meeting with Engineering & Designers to review compliance with customer requirements., • Review & Share Product Improvement Trackers (PIT Sheets) to Engineering and Design Teams., • Facilitate and Schedule Project Kickoff meetings with internal teams., • Assesses cost effectiveness of products, projects or services., • Submit cost savings ideas (internal and externally)., • Meet with existing and potential customers., • Supporting the Customer Service team, where applicable., • Writing and follow-up of non-conformity reports & MRRs where applicable., • Represent the customer (point of customer) during design & fabrication of projects., • Support customer and 3rd party witness points / inspections at CPEG facilities.Requirements:, • Associates degree required in Engineering, project management or related field. Bachelor’s degree preferred., • Minimum two (2) to four (4) years’ verifiable experience in the field or in a related area., • Able to travel to Canada to facilitate work on projects manufactured in that location, • Design skills, familiarity with CAD, NX or Inventor, • Awareness of manufacturing methods and procedures., • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met., • Have excellent communication skills, both written and verbal., • Able to work cooperatively with other project team members as well as customers;, • Intermediate to advanced proficiency level in Microsoft Word, Excel and Outlook; as well as Adobe Acrobat and Windows., • Able to carry out detailed written or oral instructions., • Able to understand proper handling of all paperwork required in department, including reporting of time, • Able to manage a number of projects at one time with frequent interruptions, • Able to function and concentrate in a busy, noisy environment Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionJob Title: Enterprise Architect (Gen AI)Location: RemoteHire Type: Contingent Target Hourly Rate: $120.00/hourWork Model: Remote (with travel to Buffalo, NY every 4-6 weeks)Contact Email: No C2C, C2H, 1099 or Visa Sponsorship/Transfer available Nature & Scope:Positional OverviewWe are seeking a visionary Enterprise Architect to lead architecture for AI, Generative AI, agentic systems, and intelligent platforms.This role defines the architectural foundation, governance, standards, and reference patterns required to scale AI safely, consistently, and strategically across the enterprise.This is not a delivery support role. It is an enterprise architecture authority accountable for aligning AI adoption with business strategy, enterprise capabilities, risk appetite, regulatory obligations, and longterm operating model transformation.The role establishes AI as a governed enterprise intelligence layer, embedded across platforms, processes, data, and decisioning, not deployed as isolated tools.The ideal candidate brings deep enterprise architecture experience, handson understanding of AI and Gen AI technology stacks, and demonstrated ability to navigate regulatory, risk, and operational scrutiny typical of large financial institutions.Role & Responsibility:Tasks That Will Lead To Your Success Enterprise AI Architecture Strategy • Define and maintain the enterprise target-state architecture for AI and agentic systems., • Establish principles, standards, and decision frameworks for enterprise-wide adoption., • Translate business strategy into AI-enabled capability and investment roadmaps.AI Platform Architecture, • Define architecture for Microsoft AI Foundry, Azure OpenAI, M365 Copilot, Copilot Studio, Azure AI Search, and thirdparty LLM platforms., • Establish patterns for model orchestration, evaluation, guardrails, telemetry, cost, and lifecycle governance., • Define when to use Copilot, Foundry-based workflows, custom agents, or external models.Agentic Architecture, • Define enterprise patterns for AI agents, multi-agent workflows, tool use, and humanintheloop controls., • Establish agent governance, including registration, ownership, permissions, monitoring, auditability, and killswitches.Context, RAG, and AIReady Data, • Define enterprise context and RAG architectures to ensure grounded, explainable, secure AI., • Establish standards for AIready data, metadata, lineage, sensitivity, access, and provenance.M365 Copilot & Enterprise Integration, • Lead architecture for Copilot extensibility, Graph connectors, plugins, and enterprise integrations., • Define patterns for access control, DLP, identity, and information protection in Copilot workflows.Responsible AI, Risk, and Controls, • Embed Responsible AI, model risk, cybersecurity, privacy, and regulatory controls into architecture patterns., • Define control overlays, risk tiering, monitoring, approval workflows, and evidence capture. Architecture Governance, • Lead AI architecture governance through review boards, SDLC checkpoints, and design authorities., • Maintain reusable architecture assets, standards, and reference patterns.Engineering Enablement, • Partner with engineering and platform teams to ensure architectures are implemented correctly and productionready., • Maintain architectural accountability from concept through production and lifecycle management. EDUCATION AND EXPERIENCE REQUIRED:, • Bachelor’s degree with 7+ years in enterprise/solution architecture or AI/ML engineering; or equivalent combination of education and experience., • 3+ years handson with Azure OpenAI Service, Azure AI Studio, or Microsoft AI Foundry, including production deployments., • Demonstrated experience designing cloudbased AI architectures (Azure/AWS/GCP) with modern integration patterns and API management., • Experience integrating LLM/GenAI capabilities into enterprise systems with productiongrade monitoring, scaling, and failover., • Working knowledge of M365 Copilot extensibility (plugins, connectors, Graph API, Copilot Studio)., • Strong understanding of Responsible AI, data governance, cybersecurity, and AI risk controls in regulated environments. Preferred Qualifications, • 5+ years architecting AI/ML/GenAI solutions in financial services, healthcare, or other highly regulated industries., • Deep handson experience with Microsoft AI Foundry: multiagent orchestration, evaluation harnesses, guardrails, accelerator patterns., • Production experience with RAG pipelines, vector databases, embedding models, and reranking strategies., • Experience integrating OpenAI, Anthropic Claude or multimodel architectures with enterprise governance controls., • Certifications: TOGAF, Azure Solutions Architect Expert, AI/ML specialty certifications., • Practical experience with model risk governance (SR 117), OCC guidance, and related financial services regulatory frameworks.

Job Description Job Summary: Controls Engineer position working at a Plant in Tonawanda, NY. This is a mix of older 10+ year old equipment and new equipment including install. Most equipment for Assembly from Hirata Japan. Job Details: Focus will be GPS - Engine Assembly Siemens PLC, HMI, Rockwell Global Common Cameras - Cognex AI, Dalsa, Matrox Fanuc Robot/Cobot AMR OTTO and Bastian Auto Fork Truck Procurement and implementation of new equipment. High focus on factory floor and supporting production and maintenance. Not a desk job; 80-90% on floor Requirements: Degree - Associates Degree required, Bachelor Degree preferred in Electrical Engineering Years of experience: 5-7 years experience Focused more on someone who is able to learn quickly, would consider less experience for the right fit. Minimum Required Skills per Hiring Manager: Strong Allen-Bradley Rockwell PLC Programming Experience (RSLogix 5000 or/and Studio 5000) HMI Programming Experience (Preferred Rockwell FactoryTalk View) Ability to read and troubleshoot electrical schematics and machine control circuits. Minimum 3 years' Experience/Ability to troubleshoot controls related automation equipment breakdowns in a high-pressure manufacturing environment Basic Fanuc Robotics Experience Demonstrated problem solving and analytical skills in a high-volume manufacturing environment Strong Comprehension of Ethernet/IP industrial networks Prior automotive / vehicle assembly or industrial automation experience preferred Understanding/Programming of servo drives, motion control, and VFDs Strong communication and interpersonal skills; able to work with maintenance, production, suppliers, and central ME teams Leadership/ownership of tasks: planning, scheduling, and coordinating work with trades and contractors. Ability to work flexible hours / rotate shifts as required by plant operations Basic Automation Controls Vision systems programming experience (Preferred Matrox) Manager's Notes: It is an intense environment - fasted past environment and need to think on your feet and be flexible Could be assigned to any shift, they do not bounce around to different shifts on a normal basis, may need to cover other shifts if an emergency or someone is on vacation, but overall candidates will be assigned to one shift. 1st shift - 6:30AM - 3PM 2nd shift - 3PM - 11:30PM 3rd shift - 11PM - 7:30AM Expectation is 2-3 weekend shifts per month. Candidates will work Saturday, Sundays, and Holidays. Onsite - 5 days/week - no remote Prefer candidates that are local to the Buffalo, Niagara Region Travel: Up to 20% - might need to travel to support their new project which requires travel to Michigan, not a regular part of the job on an as needed basis, approx. 6 times per year

Job DescriptionDescription Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Bridge Engineer to join our Western New York Transportation Department and help us deliver some of the largest and most complicated infrastructure projects in Upstate New York. Our Western New York Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-5 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 - $104,624* Benefits: Comprehensive health, dental, and vision insurance, life and disability coverage, accident and critical illness insurance, flexible spending accounts, 401(k) plan with company match, generous paid time off (PTO), flexible/hybrid scheduling, tuition reimbursement, employee assistance program (EAP), wellness programs, parental leave, professional development opportunities, employee discounts, and referral program. For more detailed information, please visit C&S Comprehensive Benefits. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Ready to lead bridge projects that strengthen and connect communities? At Fisher Associates, you’ll take ownership of high-impact bridge design and rehabilitation projects while advancing your career as a Bridge Project Manager. We’re seeking a motivated engineering professional with experience in bridge design, DOT coordination, and project delivery who is ready to step into a visible leadership role. If you’re driven by technical excellence, collaboration, and long-term career growth, this is your opportunity to make a measurable impact. Fisher Associates is seeking a motivated Project Manager – Bridge Engineering to join our growing transportation team. This role is ideal for professionals with experience in bridge design, structural analysis, transportation infrastructure, project management, and quality control who are ready to lead projects from concept development through final design and construction support. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation Bridge Project Manager • Lead the planning, design, and delivery of bridge transportation projects., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy in collaboration with teams and clients to ensure alignment and seamless delivery., • Ensure compliance with federal, state, and local regulations, permitting requirements, and quality standards., • Identify project risks and implement proactive mitigation strategies., • Serve as the primary point of contact for clients, agencies, and stakeholders, • Cultivate and strengthen client relationships to support successful project outcomes and repeat business., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Support proposal development, scope definition, and fee estimates for new and existing clients., • B.S. degree in Civil Engineering, Master’s preferred, • 7+ years progressive transportation bridge design engineering and project management experience, • Demonstrated experience managing bridge design transportation projects from design through delivery., • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MS Office, MicroStation, STAAD and Bridge Design Software preferred, • Proven success in developing trusted, long-term client relationships, • Familiarity with NYSDOT design standards preferred, • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver exceptional results through collaborative design leadership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and project leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, collaborative atmosphere., • Your journey is supported by a team-driven environment promoting mentorship and continuous learning. Fisher offers competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid #LI-CA1

Job DescriptionCompany Description TOMRA Food is a multinational organization and a leading provider of sensor-based sorting, peeling and integrated post-harvest solution for the food industry. Transforming global food production to maximize food safety and minimize food loss by making sure Every Resource Counts™, has been our strength for over 50 years. At TOMRA, we want people to innovate, show passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We value passion that focuses and commits to meeting success. We believe in a responsible and safe mindset that takes care of our customers, products, and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications Required: • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated annual base pay range for the Field Service Engineer position is $25.67 to $32.46. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Also, certain positions are eligible for additional forms of compensation such as bonuses. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description We are currently seeking Senior Gas Project Engineer(s) in a hybrid setting located somewhere in Central NY, Western NY, or Northwestern PA. The ideal candidate has at least a Bachelor’s degree in Civil or Mechanical Engineering (or other engineering field with the required experience). The successful candidate will act in a consultant role for our existing utility clients. Types of projects include (but are not limited to) main and service replacements, system improvements, pressure upgrades, new business main extensions, highway improvements, regulator station and facility design, Gate Station design, odorization, pre-heat, valve replacements, Mega Rule compliance activities, cathodic protection design, critical crossing and horizontal directional drilling design, odorization and pipe conditioning, Integrity Projects, Stress Analyses using FEM software, and more. Duties • Conduct preliminary field work which would include carrying approximately 10 lbs. throughout the work day. Expected amount of field work would be approximately 5-10% of annual work load, but may vary based on client needs and project assignments., • Coordinate with all project stakeholders and act in the interest of our clients to support their project goals., • Production of quality basemap and construction drawings for client, municipal, and regulatory agency review using AutoCAD., • Including details, BOM, Material Specifications, O&M manual development, management of inter-disciplinary projects, and more., • Development of energization and de-energization procedures., • Contractor and construction cost estimation., • Alternative Analyses and detailed comparisons including Risk Assessment, • Code and Compliance Reviews, Gap Analyses, O&M and Construction standard audits and modification., • DIMP and/or TIMP plan development and/or audits and/or improvements., • Data entry into SAP Work Management System to support your project work in our clients’ WMS’s., • Apply for and obtain municipal highway permits and other right-of-way permits (e.g. NYSDOT, railroad, Thruway Authority, Canal Corporation, etc.), • Assist with Procurement activities and evaluate bid submissions, • Participate in pre-construction and/or pre-bid meetings, site visits to meet with contractors and owners, etc., • Coordinate with landowners to obtain right-of-way / easement when required., • Create as-built records from inspector’s field notes., • Supervise, mentor, and train junior staff. Act as a role model. Set and monitor goals, objectives, and progress., • This is a Senior Level position, and you must have proven / demonstrated the ability to perform the duties of this role through previous employment., • Bachelor’s or master's degree in civil or mechanical engineering (or other closely related field)., • Minimum of 10 years of related experience for Natural Gas Operator or consultant in Natural Gas industry (Transmission and Distribution with FERC familiarity preferred), • Strong verbal and written communication skills., • Presents and conducts themselves in a professional manner., • Able to pace themselves and work within defined project budgets., • Ability to balance multiple projects and assignments and prioritize their individual workload., • Need to possess a valid driver's license with a safe driving history required., • Excellent organizational skills., • Willingness to travel to project sites in Northwestern PA, Central NY, and Western NY., • Ability to carry 10 lbs. throughout the workday sometimes through difficult terrain such as forests, agriculture fields, etc., • Preferred / Bonus Experience:, • Compressed Natural Gas, • Hydrogen transportation and/or blending., • Professional Engineering license or GTI Competent Engineer Certification Salary Range: $75,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description As a member of our Professional Services team, you will assist in the building, deploying, and maintaining of critical customer applications. In this role, you will provide thought leadership and hands-on technical execution to optimize client environments and ensure robust, scalable applications. Responsible for: • Assisting in the designing and building modern and highly scalable cloud-based applications for customers, • Migrating and modernizing customer legacy applications using AWS services, • Working with Project Managers and clients to provide recommendations and technology roadmaps to meet their business needs, • Actively participating in team meetings and cross-functional interactions, • Keeping team members and supervisors informed of progress and issues, • Actively contributing to client project status meetings, • Contributing to R&D projects to validate/invalidate new services offerings, • Remaining current with technology trends and new technologies, • Proposing the latest technology usage and integration standards, • Developing and managing backend infrastructure, APIs and integrations to support cloud-based solutions, using programming languages like Python, Java, and PHP, • Participating in code reviews, document infrastructure-as-code, and assist with UI/UX, • Building out frontend interfaces and dashboards for applications and infrastructure using languages like Angular and React, • Bridging the gap between technical complexity and business objectives through adept problem-solving abilities, • Building trusting relationships with team members and collaborating departments, • Comfortable with pushing boundaries and technical limits (maintain technical aptitude and knowledge of industry), • Confidently communicating with diverse stakeholders to translate requirements into impactful outcomes, • Championing ongoing elevation of personal skills paired with knowledge transfer to teammates, • Having the ability to rapidly learn new languages, frameworks, or business domains as needed to meet the diverse needs of multiple clients Requirements of the role: • 5+ years’ experience as a cloud engineer with hands-on expertise across AWS cloud services, • Strong experience with infrastructure-as-code tools like CloudFormation, • Experience coding in multiple languages including Node.js, Python, Angular, React, .NET Core, .NET Framework, • Experience using AWS platforms including but not limited to Cognito and Amplify, • Understanding of modern app architectures in cloud environments, • Able to collaborate with cloud engineer and project management teams, • AWS Certification(s) a must have (can be obtained upon hire) - minimum requirement at 90 days is AWS Certified Developer Associates, • In-depth experience with one or more programming languages like Java, JavaScript, Python, C# used for developing cloud-native applications., • Understanding of cloud computing concepts - IaaS, PaaS, serverless, containers etc., • Working knowledge of Amazon Web Services - key services like EC2, S3, Lambda, API Gateway, ECS, Fargate, RDS etc., • Experience using AWS command line tools and SDKs to manage infrastructure as code, • Building, deploying, managing microservices applications on AWS, • Working with AWS data storage solutions like DynamoDB, NoSQL, and Aurora RDS, • Experience with containers & orchestration platforms like Docker, Kubernetes on AWS Security best practices for applications in the public cloud Additional Valuable Skills: • Experience with CI/CD pipelines and automated testing, • Building event-driven architectures on cloud platform, • Using infrastructure as code tools like CloudFormation, • Frontend JavaScript frameworks like React, • Machine learning capabilities like SageMaker, • Leveraging serverless architectures where applicable The salary range provided is a general guideline. When extending an offer, Innovative considers factors including, but not limited to, the responsibilities of the specific role, market conditions, geographic location, as well as the candidate’s professional experience, key skills, and education/training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Senior Electrical Designer- Solar PV, BESS & Microgrid Why This Role Matters: As a member of the BSE Team, the Senior Electrical Designer works with the design team to plan, design, and oversee the installation of building systems on a variety of project types. In this role, you will design building systems for projects across our practice areas, improving the built environment, and creating a more sustainable world in the process. As a member of the BSE team, you have developed a deep expertise in a building systems specialty and have experience in design coordination as part of a multi-disciplinary team. The Senior BSE Designer works independently on moderately to highly complex projects. What You’ll Do: • Perform Codes and Standards review. Discuss interpretation with Engineer of Record (EOR), if required, • Perform Revit drafting and comply with company standards, • Lead project design efforts and communicate with EOR, • Perform site investigations and document existing conditions, • Oversee the development of Revit drawings – plans, details, schematics, and schedules, • Attend internal coordination meetings and communicate with other disciplines, • Attend client meetings and participate in project scope development, • Communicate engineering concepts clearly with clients, • Prepare engineering reports and opinions of probable construction costs, • Perform building condition evaluations and prepare reports, • Produces designs that have minimal QA/QC comments and minimal drawing presentation mistakes, • Prepare specifications, • Ability to design within a construction budget, • Review and approve submittals and shop drawings, • Perform construction punch lists, • Attend construction meetings, • Assist CPL senior leadership with proposal efforts as required, • AS Degree required, professional degree in Electrical Engineering preferred, • A minimum of eight (8) years of experience, • Ability to perform difficult technical computations and consolidate acquired data, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines, • Familiarity with building systems such as HVAC, plumbing, power distribution, lighting and low-voltage systems, and structural components, • Working knowledge of Revit and other relevant design programs, • Proficient in utilizing Microsoft Office tools, • Strong verbal, written, and interpersonal skills, • Engineering, analytical, and technical writing skills with attention to detail, • An understanding of construction plans/specifications To regular full-time and part-time employees who regularly work 30 or more hours per week • Healthcare for you and your family: Medical, Dental& Vision insurance. Single HDHP Medical plan with 100% paid premium, • Health Savings Account (HSA) with employer match, • Medical and Dependent Care Flexible Spending Accounts, • Long-Term Disability Insurance Company/team member sharing, • FREE Life Insurance and AD+D Insurance + Voluntary Life Insurance for you and your family., • FREE Short-Term and Long-Term Disability Insurance., • PTO + Sick Time + 8 Holidays a year., • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Internal Mobility & Career Advancement. We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Buffalo, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Advantage Steel and Construction is currently seeking a full-time, entry-level Project Engineer / Field Engineer to join our team in the Buffalo, NY area. This position offers a competitive salary along with a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k), paid time off (PTO), and paid holidays. If you're ready to start your career in construction management, this could be the perfect opportunity. ABOUT ADVANTAGE STEEL AND CONSTRUCTION: Since 2001, we have been delivering specialized steel construction services and have built a strong reputation across the industry. Our expertise spans a wide range of projects, including temporary support systems, jacking operations, bridge construction and rehabilitation, structural steel erection, and more. We are committed to delivering cost-effective, sustainable, and high-quality solutions that meet our clients' timelines and budgets. Our company is founded on core values of integrity, craftsmanship, and excellence. Our success is driven by our dedicated team, who consistently uphold these values. We are committed to fostering a supportive work environment where employees are encouraged to grow, learn, and advance their careers. PROJECT ENGINEER JOB SUMMARY: The Project Engineer will support the Project Manager and Superintendent in managing construction projects. Responsibilities include handling contracts, preparing change orders, maintaining project schedules, coordinating with vendors and suppliers, tracking quantities, analyzing production, assisting with billing and invoicing, allocating resources, and contributing to estimating and procurement activities. PROJECT ENGINEER RESPONSIBILITIES: • Assist with project takeoffs and maintain accurate documentation, • Prepare and support project proposals, • Solicit and review supplier and subcontractor quotes, • Build and maintain strong working relationships with clients, vendors, subcontractors, and internal teams, • Utilize strong organizational skills to manage multiple project tasks efficiently, • Ability to read and understand construction drawings and specifications, • Strong analytical thinking and problem-solving capabilities, • Proficiency in Microsoft Office applications, especially Excel, • Excellent written and verbal communication skills, • Strong time management skills with the ability to meet deadlines and maintain attention to detail, • Adaptability and willingness to take on new challenges, • Bachelor's degree in Civil Engineering, Mechanical Engineering, Construction Management, Business Management, or a related field (or equivalent industry experience), • 0–3 years of experience in a Project Engineer or similar role This is a Safety Sensitive Position requiring work on project sites, including federal projects. This position may require working at heights, in confined spaces, around heavy equipment, around high voltage, and under constantly changing circumstances. This position will be subject to more stringent drug testing and compliance policies associated with our status as a federal contractor. SPECIAL NOTE This job description is presented as guidance only. Other reasonable tasks or responsibilities as management sees necessary may be added to this job description in order to achieve satisfactory job performance by the team member. EEO STATEMENT Brayman and Affiliate Companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, veteran status, or on any other characteristic protected by law. CONFIDENTIALITY Some positions with the company will have access to confidential and proprietary information. Successful candidates for those positions will be required to sign our standard confidentiality agreement as a condition of employment. FULL JOB DESCRIPTION For a complete job description and list of responsibilities, please visit our career page at LOCATION 14150 Job Posted by ApplicantPro

Job Description We are currently hiring a Project Architect in our Architectural division at our Buffalo, NY office. The Project Architect will support our either our Sports or Higher Education or Essential Facilities and Municipal Design Studio. Experience in any of those markets is a plus, but not required to apply. The Sports Studio is focused on large scale sports, venue and hospitality projects throughout the United States. The Essential Facilities Design Studio specializes in architectural projects for fire stations, police stations, SWAT Training, armories, 911 Centers, fire and police training centers, department of public works, ambulance centers, mercy flight hangers, and other miscellaneous municipal work for local and County municipalities. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including Municipal, State, Federal, Healthcare, K-12 and Higher Education, Residential, and Commercial projects. The overall expectations of the Project Architect position are to work with large project teams, including in-house and outside subconsultants, to ensure that all aspects of the project are being met and completed. An individual in this position needs to be capable of delegating aspects of work to the Project Technician and coordinating with all other disciplines to successfully deliver high quality, coordinated projects. The Project Architect will assist the Project Manager with client meetings, design team meetings, and construction administration. In addition, the Project Architect must be motivated and capable of performing all duties with minimal guidance. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. This position has excellent advancement opportunities within our corporate structure. Duties Ideal candidate could: • Execute a project start to finish, • Complete thorough and accurate Code reviews, • Have proposal writing experience, • Has experience with client management, • Has a record of executing projects with low change order percentage, • Understands how to execute public works projects, • Has specification writing experience including front end spec preparation, • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 8+ years of work experience under a licensed architect, • Prior experience designing projects for Essential Facilities and public works projects is preferred., • Have thorough knowledge and understanding of New York State building codes, • Strong technical design, specification writing and construction document skills, • Well-developed project design and planning skills, • Excellent written and verbal communication skills, • Excellent graphic presentation skills, • Revit BIM Modeling experience, • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $70,000 - $85,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Senior Cloud Architect – Data, AI & GenAI Platforms Location: US / Canada (Remote/Hybrid) Type: Contract / Full-Time Overview: We are hiring a Senior Cloud Architect to drive the design and implementation of modern data and AI platforms. This role will enable enterprise adoption of AI/ML and GenAI solutions through scalable cloud architectures. Key Responsibilities: • Build and scale cloud-native data and AI platforms, • Architect data pipelines and AI/ML integration frameworks, • Ensure governance, security, and operational excellence, • Strong experience in cloud architecture (AWS, Azure, GCP), • Expertise in large-scale data platform design and implementation, • Data platforms: Databricks, Snowflake, Azure Synapse, BigQuery, • ML/AI Engineering: Python, PyTorch, MLOps pipelines, • GenAI: Experience with LangChain, LLM orchestration, agentic AI

Job DescriptionJob Title: CyberArk Technical EngineerLocation: Buffalo, NYHire Type: ContingentWork Model: Hybrid (4 days a week in the office)Target Pay Rate: $100.00/hourContact Email: No C2C, C2H , 1099 or Visa Sponsorship/Transfers available Nature & Scope:Positional OverviewAre you a seasoned Cyber Ark Technical Engineer looking for an exciting new challenge? Join our client’s dynamic team where innovation and excellence are at the core of everything we do. They offer a collaborative and stimulating environment where your expertise will drive cutting-edge projects and shape the future of technology. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now!Role & Responsibility:Tasks That Will Lead To Your Success • Work closely with Technology management, customers, and support teams on a regular basis to lead the design, development, and execution of technical solutions that meet or exceed current and future needs of the organization., • Lead the design, deployment, and integration of Privileged Access Management (PAM) solutions., • Customize and configure CyberArk to meet organizational needs., • Develop and implement policies, procedures, and practices related to PAM., • Manage and maintain CyberArk, ensuring high availability, scalability, and performance., • Monitor PAM environments for compliance with security policies and audit requirements., • Conduct regular audits and assessments of privileged accounts to ensure compliance with security policies., • Primary responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing., • Review documentation, proposals, and changes proposed by less experienced staff., • Maintain an expert level of technical aptitude and expert working knowledge of supporting application(s), development environments and the supported client environment. Skills & Experience:Qualifications That Will Help You Thrive, • Minimum Bachelor’s degree in Computer Science or Computer Engineering., • Minimum 12 years advanced experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications., • Demonstrated expert level experience designing, implementing, and operating Privileged Access Management (PAM) and Secrets Management solutions in large, regulated enterprise environments., • Strong hands on expertise with CyberArk platforms, including credential vaulting, privileged session management, access policy enforcement, audit logging, and credential lifecycle automation., • Experience leveraging Azure Key Vault for secure storage and management of application secrets, keys, and certificates., • Proven ability to enforce least privilege, credential rotation, session monitoring, and compliance with internal risk, audit, and regulatory standards., • Proven experience integrating PAM and secrets management capabilities into DevOps and application delivery pipelines., • Strong automation skills using scripting and APIs (e.g., PowerShell, REST) to support scalable onboarding, credential rotation, access workflows, and platform integrations., • Able to partner effectively with application, cloud, and platform teams to embed security controls into modern CI/CD and cloud native architectures while minimizing friction for development teams., • Strong background in hybrid enterprise infrastructure and cloud environments, including Windows and Linux systems, Active Directory and Entra ID, and Azure services., • Experience designing resilient, highly available, and secure PAM integrations across on premises and cloud platforms., • Deep understanding of authentication, authorization, logging, monitoring, and enterprise security architecture within financial services or other highly regulated environments., • Required / Preferred Technologies, • CyberArk Privileged Access Management (Required), • CyberArk CDE (Cloud or DevOps Extensions) – Preferred, • Azure Key Vault, • GitLab/ Ansible, • PowerShell and REST API automation, • CI/CD and DevOps tooling integration, • Active Directory / Entra ID, • Windows and Linux platforms

Job Description Overview CTG is seeking to fill a Senior Technical Engineer(DevOps) opening for our client in Buffalo, NY. Location: Buffalo, NY Duration: 15 months Must have experience: Terraform, Ansible, Azure, Git. Overview: The Senior Technical Engineer will provide high-level technical solutions, designs, documentation, and guidance for the development and deployment of new or existing technical solutions. This role demands an expert-level aptitude in system architecture and infrastructure design, with a focus on meeting the evolving needs of the organization. Primary Responsibilities: • Collaborate with technology management, customers, and support teams to design, develop, and execute technical solutions., • Lead infrastructure architecture and design efforts, including research and development of new systems., • Create technology standards and policies, analyze user requirements, and conduct thorough system testing., • Engage regularly with business partners to clarify problems/opportunities and gather business requirements., • Estimate project efforts for complex, moderate to large-scale projects., • Manage vendor interactions and contract resources as needed., • Mentor and coach less experienced engineers and technicians, reviewing their documentation and proposals., • Continuously expand knowledge of Financial Services trends and technologies., • Promote and adhere to industry best practices and standards., • Maintain expert-level knowledge of supporting applications and development environments., • Assist in budget development for expenses and capital projects., • Identify and escalate risk-related issues in accordance with the company’s standards., • Foster a diverse work environment that reflects the company brand., • Ensure compliance with internal control standards and address audit points as required. Supervisory/Managerial Responsibilities: Not Applicable. Education and Experience Required: • Combined minimum of 12 years of higher education and/or work experience in systems design, management, and/or architecture., • Bachelor’s degree in Computer Science or Computer Engineering., • Minimum of 12 years of advanced experience in a technical engineering role focusing on infrastructure design, data management, and system development for complex applications., • Proven ability to translate complex requirements into high-quality implementations., • Strong problem-solving and troubleshooting skills, with the ability to develop alternative solutions., • Experience with project estimation and budget planning. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Recruiter Anisha Muralidhar at . Kindly forward this to any other interested parties. Thank you!

Job Description Summary The Senior Rotating Equipment Engineer serves as a technical authority for engine‑driven rotating equipment packages— including gas/diesel engines driving compressors, pumps, and generators. The role supports specification, design, vendor review, testing, troubleshooting, and lifecycle engineering for packaged rotating machinery used in industrial and energy applications. Key Responsibilities Design & Technical Leadership • Lead selection, specification, and evaluation of engine‑driven equipment packages., • Develop/review datasheets, specifications, requisitions, and vendor documentation., • Review performance curves, vibration analyses, design calculations, and engine ratings., • Ensure compliance with API-614, ISO, ASME, and OEM standards., • Support alignment, mounting, foundations, and skid design., • Develop maintenance strategies, conduct failure analyses, and support reliability programs., • Write detailed equipment specifications and purchase orders., • Oversee testing and commissioning activities to ensure performance spec is met., • Create/maintain testing work instructions and ITPs., • Coordinate with Production, QC, and Test teams to ensure test readiness., • Ensure safe design, installation, and operation of all rotating equipment., • Mentor junior engineers and work cross‑functionally with mechanical, electrical, process, and production teams., • Strong customer communication and multi‑tasking abilities., • Ability to troubleshoot, test, and service technical equipment., • Familiarity with API, ASME, NEC/IEC/CSA codes and rotating equipment (compressors, pumps, gears, motors, expanders, generators)., • Hands‑on approach and ability to work independently., • Bachelor’s degree in Mechanical Engineering or related field., • 8–15+ years of rotating equipment engineering experience., • Experience with gas/diesel engines, compressors, pumps, generators, and skid‑mounted systems., • Understanding of rotor dynamics, vibration, lubrication, sealing, and alignment., • Travel for meetings, commissioning, and field service., • Prepare detailed field service reports and maintain site‑visit logs., • Perform other duties as assigned.

Job Description We are looking for a Tool Engineer to join our growing company. Our customers drive the work we do. We empower our employees to deliver best-in-class service. As part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. Our ideal candidate has a bachelor’s degree in mechanical engineering or a related field, professional experience within a manufacturing and design environment, and strong problem-solving and math skills. Responsibilities: • Manage and resolve tooling problems related to manufacturing, • Coordinate with the plant to resolve safety, quality, throughput, or cost issues related to tooling, • Generate and implement cost savings ideas to reduce tool and manufacturing costs, • Work with the Commodity Manager Customer Service Rep to ensure tool use issues and availability does not interrupt production, • Manage weekly tooling spend against a variable piece cost budget, • Perform and document tool trials, • Revise and update tool drawings and documentation as required, • Develop new systems to recondition and re-use tooling when economically feasible, • Attend regularly scheduled operations and team problem-solving meetings, • Assist the manufacturing team in resolving machining and tooling-related issues relating to costs, scrap rates, and low production rates, • Support cross-functional teams to achieve overall plant metrics, • Recommend optimized machining processes and cutting parameters, • Introduce new technology and improved tooling designs, • Provide year over year Cost per Piece reduction plans, • Coordinate with the preset team on proper tool setup techniques, • Maintain PFEP and use PFEP and Top Spend Data to initiate savings projects, • Utilize the ACD process accordingly, • Adhere to customer safety requirements, • Complete required cost savings and tool test documentation, • Report and document non-conformances, CARs, and continuous improvements, • Maintains safety and good housekeeping standards for the site, • Make decisions within the limits of general standards or procedures, • Report near misses and incidents to the site manager and cooperate with investigations., • Adhere to customer tool test procedures, • Other duties as assigned Requirements: • 5 years of experience working in production machining or a bachelor’s degree in mechanical engineering or experience working in a closely related technical field preferred, • Prior experience designing and tooling parts in a manufacturing environment, • Strong math and problem-solving skills and ability to read blueprints and schematics, • Proficiency with computers, • Able to work with little to no supervision and ability to multitask, • Strong interpersonal, leadership, and organizational skills, • Good written, and oral communication skills, computer, and system knowledge

Job Description About the Hiring Firm This firm is a global leader in precision motion control and systems engineering, with a long track record of delivering some of the most technically demanding components and systems used in aerospace, defense, industrial automation, and other markets. This company designs, manufactures, and integrates high-performance supplies/products across a range of advanced and exciting industries. As an On-Site Senior Manufacturing Engineer, you will: • Lead the development and launch of manufacturing processes for new aerospace components from concept through production, • Champion Design for Manufacturability (DFM) by partnering closely with design and engineering teams early in the lifecycle, • Develop, validate, and optimize CNC programs, operation sequences, fixturing concepts, tooling, and gauge requirements, and detailed work instructions, • Drive continuous improvement of existing production processes through direct, hands-on involvement on the shop floor, • Establish time standards, labor estimates, and economic run quantities for complex, high-precision parts, • Create accurate cost models to support new business opportunities and ongoing process improvements, • Evaluate, justify, and implement new capital equipment and advanced manufacturing technologies, • Collaborate daily with engineering, operations, quality, technicians, and suppliers to resolve manufacturing issues and mentor team members, • Lead manufacturing projects and, where applicable, own the engineering scope of a dedicated production cell, • Support and improve automated manufacturing cells to reduce labor, improve consistency, and increase throughput Equal Opportunity Employer We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic

Job Description Job Title Supplier Quality Engineer Location Remote Department Supply Chain / Quality Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and heavy-industrial markets. With advanced fabrication operations in Arizona and New York, GTI depends on high-performing supplier partnerships to meet rigorous standards for quality, reliability, compliance, and delivery performance. Position Overview GTI is seeking a Supplier Quality Engineer to support supplier qualification, auditing, performance management, and corrective action initiatives across the supply base. This role works directly with suppliers and internal engineering, quality, and procurement teams to ensure purchased materials, fabricated components, and subassemblies meet GTI’s technical and regulatory standards. The Supplier Quality Engineer plays a hands-on role in driving root cause resolution, reducing supplier variability, and supporting new product introduction readiness. Key Responsibilities • Conduct supplier audits, capability assessments, and process evaluations to ensure conformance with engineering and quality standards, • Support supplier onboarding activities including First Article Inspections (FAI), PPAP submissions, and technical validation reviews, • Review supplier quality documentation including control plans, PFMEAs, process flow diagrams, and inspection reports, • Drive Supplier Corrective Action Requests (SCAR) using structured root cause methodologies (8D, 5 Why, Fishbone), • Monitor supplier KPIs including defect rates, on-time delivery, cost of poor quality (COPQ), and corrective action cycle time, • Collaborate with Engineering to define inspection criteria, critical characteristics, and acceptance standards, • Support Advanced Product Quality Planning (APQP) activities for new product launches and engineering changes, • Investigate nonconforming materials and coordinate containment, corrective action, and disposition decisions, • Maintain supplier performance dashboards and quality reporting tools, • Partner with Procurement to support sourcing decisions based on quality risk and supplier capability, • Conduct dimensional inspections, weld reviews, and documentation audits as required, • Support continuous improvement initiatives to reduce scrap, rework, and supplier-related production disruptions, • Travel to supplier facilities for audits, technical reviews, and quality investigations as needed Required Qualifications • Bachelor’s degree in Engineering, Quality, Manufacturing, or related technical field, • 4+ years of experience in supplier quality, quality engineering, or manufacturing quality roles in an industrial environment, • Working knowledge of ISO 9001, APQP, PPAP, FMEA, and Control Plans, • Experience performing supplier audits and capability assessments, • Strong understanding of metal fabrication, machining, weld processes, or electro-mechanical assemblies, • Experience with root cause analysis tools and statistical process control concepts, • Ability to read and interpret engineering drawings, GD&T, and weld symbols, • Strong communication skills and ability to influence supplier performance improvements, • Proficiency in ERP systems and Excel-based data analysis Preferred Qualifications • CQE, CQA, or Six Sigma certification, • Experience in modular fabrication, energy systems, or defense manufacturing, • Familiarity with AWS D1.1 weld standards and inspection requirements, • Experience working with multi-site manufacturing operations Travel Must live near Airport with 80% Travel

Job Description We are currently hiring an Electrical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses and design. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Electrical Engineer will work with our team in a lead role on a variety of decarbonization/electrification/renewable energy projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Design building electrical systems, • Design photovoltaic, battery storage systems, and grid interconnection, • Field investigations to document existing conditions, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 2-4 years of relevant experience, • Bachelor’s degree in Electrical Engineering is preferred, • Well-rounded experience in building electrical system and/or distributed energy system design, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $70,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionJob Requirements The ideal candidate will be responsible for providing engineered drawings for HVAC control systems. You should be able to review specifications and contract drawings for assigned projects. Provide accurate drawings for HVAC control systems and schematics using Visio. Have the ability to size control valves, dampers, air flow stations, and the like for HVAC systems. Experience designing systems with typical DDC control lines such as: Schneider Electric, Tridium, or similar. Be able to write and understand the sequence of operations for HVAC control systems, along with assembling submittals and O&Ms for projects. Work Experience • Associate degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 1-3 years' experience in relevant field., • 2+ years' experience in controls design engineering OR 5+ years as a controls technician., • Sound knowledge of electrical circuits, HVAC and controls required., • Advanced computer skills and proficiency in MS Office Suite required. Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job Description Job Title Senior Mechanical Engineer | HVAC Mechanical Engineer | Thermal Systems Engineer – Modular Infrastructure Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI Energy, a division of GTI Fabrication, designs, engineers, and manufactures complex modular systems supporting modular data center infrastructure, battery energy storage systems (BESS), power generation platforms, and industrial energy systems. Our products integrate structural, mechanical, thermal, and electrical systems into highly engineered modular platforms operating in demanding real-world environments. GTI operates in a fast-paced, engineered-to-order manufacturing environment where HVAC system performance, thermal reliability, airflow management, and manufacturability are critical to successful product execution. Our modular infrastructure products must operate safely and reliably across extreme ambient environments, variable load conditions, and mission-critical uptime requirements. Position Overview GTI Energy is seeking a Senior Mechanical Engineer with strong HVAC and thermal systems expertise to lead cooling system design and thermal integration across modular data centers, power systems, and industrial enclosure platforms. This role focuses on HVAC system architecture, equipment selection, airflow management, heat rejection, and integration of packaged cooling systems into highly constrained modular environments. This is not a traditional commercial building HVAC role focused solely on office buildings or facility infrastructure. GTI is specifically seeking engineers who understand how to design HVAC and cooling systems for enclosed equipment, modular systems, industrial infrastructure, and mission-critical applications where space constraints, manufacturability, vibration, acoustics, serviceability, and thermal performance must all be considered simultaneously. The ideal candidate has experience supporting modular data centers, telecom shelters, BESS systems, generator enclosures, industrial skids, electrical equipment rooms, or other enclosed industrial infrastructure requiring engineered thermal management solutions. Key Responsibilities HVAC System Design & Cooling Integration • Design and integrate HVAC and cooling systems for modular data centers, BESS enclosures, power systems, and industrial equipment platforms, • Size cooling systems based on actual equipment heat loads, environmental conditions, and operational requirements, • Develop airflow management strategies including supply/return air routing, intake/exhaust placement, ducting, plenum design, and thermal zoning, • Design systems for worst-case ambient conditions and full operational loading scenarios, • Select and integrate packaged HVAC equipment, CRAC/CRAH systems, DX units, chillers, heat exchangers, fans, ventilation systems, and thermal management components, • Own HVAC and thermal integration within modular enclosure designs and constrained equipment layouts, • Coordinate cooling system packaging with structural, electrical, and manufacturing constraints, • Develop 3D CAD models, layouts, mechanical assemblies, and engineering drawings using SolidWorks or similar platforms, • Design systems with strong focus on manufacturability, serviceability, maintenance access, and field installation efficiency, • Perform thermal calculations, airflow analysis, psychrometric evaluations, and cooling load assessments, • Support CFD analysis and airflow validation activities where applicable, • Evaluate system performance across varying environmental and operational conditions, • Participate in prototype validation, heat runs, thermal testing, and troubleshooting activities, • Partner closely with Electrical Engineering, Structural Engineering, Manufacturing Engineering, NPI, Quality, and Operations teams, • Work with manufacturing teams to ensure HVAC systems align with fabrication, assembly, and installation capabilities, • Support supplier selection, technical evaluations, and equipment integration activities, • Drive DFM initiatives focused on scalable HVAC integration and modular production efficiency, • Standardize thermal system architectures and reusable cooling design strategies where possible, • Reduce installation complexity and improve serviceability across product platforms, • Contribute to HVAC design standards, engineering best practices, and thermal management guidelines, • Mentor junior engineers and support development of internal thermal engineering capability, • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 6–12+ years of experience in HVAC system design, thermal systems engineering, or mechanical product development, • Experience designing HVAC and cooling systems for enclosed industrial systems or modular infrastructure products, • Strong understanding of cooling load calculations, airflow management, and thermal system integration, • Experience selecting and integrating packaged HVAC and thermal management equipment, • Strong knowledge of psychrometrics, heat transfer, airflow balancing, and thermal performance principles, • Proficiency with SolidWorks or similar 3D CAD platforms, • Experience supporting modular data centers, telecom shelters, BESS systems, or industrial power infrastructure, • Experience with CFD analysis, thermal modeling, or airflow simulation tool, • Familiarity with ASHRAE standards, UL requirements, and environmental testing standards, • Background in sheet metal, enclosure design, ducting systems, or industrial packaging, • Experience in contract manufacturing or engineered-to-order product environments, • Opportunity to design mission-critical cooling systems supporting AI infrastructure, energy storage, and power generation markets, • High-impact engineering role with direct influence on product architecture and system reliability, • Collaborative environment combining engineering depth with real-world manufacturing execution, • Exposure to advanced modular infrastructure products and complex thermal integration challenges, • Strong career growth opportunities within one of the fastest-growing manufacturers in the United States

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking a motivated Entry Level Electrical Engineer to join our dynamic team. This is an exciting opportunity to launch your career with an industry leading architecture, engineering, and construction firm known for innovative solutions and a collaborative work environment. We believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. If you want your time, energy, talent, enthusiasm, and personal passion to result in meaningful impacts and improvements in our communities, you belong on the C&S team! Position Responsibilities • Works in the responsible charge of a licensed electrical engineer, • Assist in the design, analysis, and implementation of medium voltage, low voltage, telecommunication, and fire alarm systems for a variety of projects, including hospitality, theme parks, aviation, commercial, industrial, higher education, and healthcare., • Prepare drawings, specifications, and technical reports under the guidance of senior engineers., • Support project teams with calculations, cost estimates, and field investigations., • Collaborate with multidisciplinary teams to deliver high-quality, client-focused solutions., • Participate in site visits, inspections, and construction administration activities., • Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations, • Bachelor’s degree in Electrical Engineering from an accredited institution, • 0-4 years of relevant experience (internships or co-ops a plus), • Strong technical, analytical, and problem-solving skills, • Proficiency with AutoCAD, Revit, or similar design software preferred, • Excellent communication and teamwork abilities $78,000 - $95,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description API Heat Transfer is looking for people who enjoy being part of our Growth. Our Operations Team is on the way to becoming a Lean Manufacturing powerhouse! If you like to improve things, and want to be part of a winning team, we'd love to talk to you about our Quality Engineer position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10-minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. What We Offer You: • Stable and Growing 140+ year old company!, • Career development and advancement, • Ability to impact customers across multiple industries., • Full health & welfare benefits, 401(k), PTO We are seeking a detail-oriented and driven Quality Engineer to join our team and play a key role in ensuring our products and processes meet the highest standards. Reporting to the Quality Manager, this position is responsible for developing and implementing quality plans, managing RMA and CAPA processes, conducting audits, and driving continuous improvement initiatives. If you thrive in a collaborative environment and have a passion for quality systems, we’d love to hear from you. Key Responsibilities • Develop and implement quality plans aligned with ISO 9001 standards., • Manage the RMA (Return Material Authorization) process to ensure timely resolution of returns., • Lead the CAPA (Corrective and Preventive Action) process, including root cause analysis and effectiveness verification., • Maintain and update work instructions for clarity and compliance., • Conduct process capability studies and recommend quality improvements., • Collaborate with cross-functional teams to resolve quality issues and drive continuous improvement., • Schedule and conduct supplier audits to promote standardization and performance improvement., • Lead initiatives to enhance supplier capability and ensure compliance with company quality standards., • Prepare and oversee qualification test plans, procedures, and reports., • Bachelor’s degree in engineering or quality assurance (required)., • Strong knowledge of ISO 9001:2015 and quality management systems., • Experience in auditing and evaluating quality systems., • Proficient in Microsoft Office and other PC-based tools., • Ability to interpret engineering documentation and technical procedures., • Strong problem-solving skills using tools such as 8D, 5 WHY, Pareto Analysis., • Familiarity with supplier quality standards and procedures., • Frequent use of hands, sitting, talking, and hearing., • Occasional standing, walking, climbing, and lifting up to 10 lbs. INDZ

Job DescriptionJob Title: Electrical EngineerLocation: Buffalo, NY Hire Type: Direct HirePay Range: $85,000 - $105,000Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Thursday, 6am – 4pmRecruiter Contact: Sean Pebbles, 716-256-1259, & Scope:Positional OverviewThe Imagine Group is recruiting for an Electrical Engineer on behalf of our client, a leading global manufacturer and supplier of high-performance copper and copper-alloy materials in Buffalo, NY, supporting a wide range of industries including automotive, electronics, and energy. The organization operates advanced production facilities that manufacture strips, sheets, and other semi-finished metal products used in electrical components, heat exchangers, and industrial applications. Known for its focus on innovation and sustainable manufacturing, the company partners with customers to deliver reliable materials that support modern infrastructure and emerging technologies. In this role, you will be responsible for designing, maintaining, and improving electrical systems that support manufacturing equipment and plant operations. You will troubleshoot electrical and control system issues, support equipment upgrades, and implement solutions that enhance reliability, safety, and production efficiency. Additionally, you will collaborate with engineering, maintenance, and production teams to optimize automation systems and support continuous improvement initiatives.Role & Responsibility:Tasks That Will Lead to Your Success • Analyze recurring equipment problems, recommend and implement long-term solutions to increase plant productivity and efficiency., • Duties include planning, scheduling, design, supervision, implementation, commissioning, and creating/modifying documentation and drawings of electrical/electronic projects on a small/medium scale., • Maintain and enhance plant electrical/electronic schematics and literature to provide sufficient technical resources of information and minimize electrical/electronic breakdown time., • Maintain system software backups and system documentation., • Instruct peers on updated troubleshooting techniques and attend pertinent training programs and seminars to acquire state-of-the-art knowledge of electrical/electronic industrial systems., • Maintain spare parts and test equipment to ensure effective maintenance and repair of all plant electrical/electronic equipment., • Ensure a safe and healthy work environment by adhering to company policies. Promote a climate of positive labor relations by adhering to the labor contract., • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans (HW).Skills & ExperienceQualifications That Will Help You Thrive, • BS/BT degree in Electrical Engineering, • Two (2) years of industrial experience, including PLC, AC/DC drives, industrial instrumentation, motor controls experience required; Five (5) years industrial experience preferred, • Six Sigma certification preferred

Job DescriptionJob Title: Mechanical EngineerLocation: Buffalo, NY Hire Type: Direct HirePay Range: $85,000 - $105,000Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Thursday, 6am – 4pmRecruiter Contact: Sean Pebbles, 716-256-1259, & Scope:Positional OverviewThe Imagine Group is recruiting for a Mechanical Engineer on behalf of our client, a leading global manufacturer and supplier of high-performance copper and copper-alloy materials in Buffalo, NY, supporting a wide range of industries including automotive, electronics, and energy. The organization operates advanced production facilities that manufacture strips, sheet, and other semi-finished metal products used in electrical components, heat exchangers, and industrial applications. Known for its focus on innovation and sustainable manufacturing, the company partners with customers to deliver reliable materials that support modern infrastructure and emerging technologies. In this role, you will be responsible for designing, maintaining, and improving mechanical systems and equipment used in manufacturing operations. You will analyze production processes, troubleshoot mechanical issues, and implement engineering solutions that enhance efficiency, reliability, and safety. Additionally, you will collaborate with maintenance and production teams to support equipment upgrades, preventative maintenance strategies, and continuous improvement initiatives.Role & Responsibility:Tasks That Will Lead to Your Success • Engineer and design modifications to existing equipment to improve production and reduce maintenance costs., • Direct and coordinate major overhauls and rebuilds to improve quality and yield. Maintain minimum downtime and production delays., • Communicate and coordinate equipment maintenance requirements and activities with the maintenance department regarding manpower and downtime requirements, acquiring input form equipment operators and maintenance staff., • Oversee preventive maintenance activities, such as long-range planning to ensure maximum production and utilization of production equipment., • Coordinate with contractors on design and implementation of new equipment regarding required maintenance and replacement parts to ensure optimal utilization and longevity of equipment., • Maintain equipment to comply with local, state and federal government and insurance company regulations., • Direct and coordinate bargaining unit employees as required. Promote safe and healthy workplace. Ensure optimal labor relations by adhering to the contract and Company policies. Maintain good housekeeping and organization within the department.Skills & ExperienceQualifications That Will Help You Thrive, • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans (HW)., • 5 years’ experience, • BS Degree- Mechanical Engineering

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking a Civil Design Engineer to be based in our Rochester or Buffalo office. This is a great opportunity for an individual to join our civil engineering practice. This candidate will work on multi-disciplinary teams to perform site/civil infrastructure design and construction observation for private development, higher education, K-12 schools municipal, and healthcare clients. Responsibilities include field data collection, analysis, and development of engineering plans using CAD software and 3D models, and preparation of engineering reports, specifications, and cost estimates. Work is initially performed under close supervision with potential to progress to independent work based on performance. Relocation assistance available for qualified candidates. Occasional day travel will be required. Required Knowledge, Skills & Abilities • 0-3 years’ experience, • B.S. Degree in Civil Engineering, • EIT certification (or intent to pursue in near future), • Skills to succeed in small and large multi-disciplinary team environments, • Excellent communication and organization skills, • Proficient with AutoCAD, AutoCAD Civil 3D $78,000 - $85,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Engineering Technician Hourly position Job Responsibilities Release of hardware to the manufacturing floor through the finished product. Plan out the product stages and best practices to be used out on the factory floor. High level of technical expertise and skill, which they use to set-up, modify, optimize and monitor production processes. Examine process flows and look for ways to streamline production, improving turnaround times. Responsible to make recommendations for tooling and process requirements of new or existing product lines. People skills will come into play to work across multi-disciplinary teams in a fast-paced environment. Requirements • 1-5+ years’ experience in manufacturing., • Ability to generate assembly work instructions for assembling hardware in Dozuki., • Ability to read blueprint/drawings and BOM’s., • Ability to interface with all levels of Engineering, Quality Assurance and Production teams, • Ability to identify discrepancies and errors in paperwork., • Demonstrated high degree of mechanical aptitude., • Experience with assembly of hardware., • Experience troubleshooting process problems in a technical environment., • Proficient with MS Office Suite, including Outlook, Excel, and Word, • Personally accountable for responsibilities and deadlines, • Excellent written and oral communication skills. Demonstrated ability to communicate across levels and functions. Excellent organizational skills., • Associate’s degree in a relevant technical field or equivalent experience.

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job Description Job Title Senior Technical Recruiter – Engineering & Advanced Manufacturing Location Phoenix, AZ or Buffalo, NY (Hybrid or Remote - Must be within commuting distance to one of our offices) Department Talent Acquisition Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, modular data centers, defense, and industrial markets. Our engineering organization spans Mechanical, Electrical, Structural, Piping, Automation, and Advanced Manufacturing disciplines. As GTI scales, securing high-caliber engineering talent is a competitive advantage. Position Overview GTI is seeking a Senior Technical Recruiter to lead full-cycle recruitment for complex engineering and advanced manufacturing roles. This individual will operate as a strategic talent advisor to engineering leadership, specializing in Mechanical Engineering, Electrical Engineering, Structural Engineering, Piping Engineering, Automation Engineering, Advanced Manufacturing Engineering, and New Product Introduction (NPI) talent. This role requires deep technical sourcing capability, advanced Boolean expertise, patent and publication mining, talent mapping, and high-touch candidate engagement strategies. The Senior Technical Recruiter will manage executive-level offer negotiations and provide data-driven market insights to leadership. Key Responsibilities • Lead full-cycle recruitment for senior and specialized engineering roles across mechanical, electrical, structural, piping, automation, and NPI disciplines, • Partner with Engineering Directors and functional leaders to define role scope, technical requirements, and success criteria, • Develop and execute advanced sourcing strategies using LinkedIn Recruiter, complex Boolean strings, X-ray search techniques, and competitive company mapping, • Source talent through patents, technical publications, conference proceedings, and professional engineering associations, • Build multi-quarter talent maps identifying competitor organizations, target candidates, and emerging skill clusters, • Develop passive candidate pipelines across advanced manufacturing, AEC, industrial automation, and energy systems industries, • Conduct high-level technical screening conversations to assess design experience, systems exposure, and manufacturing alignment, • Partner with compensation and leadership teams to structure complex offer packages including base salary, bonus, 401(k) match, relocation, and performance incentives, • Provide compensation benchmarking insights for engineering markets in Phoenix, Buffalo, and national talent hubs, • Lead offer negotiations with senior-level engineers and engineering managers, • Build CRM campaigns and long-term engagement strategies for niche engineering talent pools, • Deliver market intelligence reports on competitor hiring trends, compensation shifts, and skill demand evolution, • Optimize ATS workflows and recruitment analytics to improve hiring velocity and quality of hire, • Support workforce planning initiatives and long-range engineering hiring strategies Required Qualifications • 7+ years of technical recruiting experience focused on engineering and manufacturing roles, • Proven experience recruiting Mechanical Engineers, Electrical Engineers, Structural Engineers, Automation Engineers, or Advanced Manufacturing Engineers, • Advanced expertise in LinkedIn Recruiter, Boolean search construction, and talent mapping methodologies, • Experience sourcing through patents, research publications, and technical conferences, • Demonstrated ability to negotiate complex, multi-component compensation packages, • Strong understanding of engineering design processes, NPI environments, and manufacturing operations, • Experience recruiting within manufacturing, industrial automation, AEC, or energy sectors, • Strong analytical skills with the ability to interpret labor market data, • Ability to operate independently and influence senior leadership Preferred Qualifications • Experience recruiting for modular systems, BESS, GenSet, data centers, or heavy fabrication environments, • Deep research or competitive intelligence background, • Experience supporting international talent pipelines, • Experience working in high-growth or scaling manufacturing organizations

Job Description Hazen and Sawyer is seeking an Principal Electrical Engineer for our Saratoga Springs and Buffalo New York offices. As part of our electrical team you will have exceptional opportunities to provide superior solutions to our clients’ most difficult problems through a variety of water related assignments. The successful candidate will be involved in a wide range of electrical power, lighting, and motor control system design and analysis for water, wastewater, reuse, and infrastructure projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Integrating with design team from initial studies and conceptual design through construction of substation, generators, pump stations, and/or treatment facilities., • Field investigations and site visits from design through construction., • 5 – 15 years’ experience, • Bachelor’s degree in electrical engineering or electrical engineering technology (MS or MEng Preferred), • Professional Engineering license in NY, • Self-starter with attention to detail, • Candidate must possess excellent writing, communication, interpersonal, and organizational skills., • Must be proficient in all computer software typically used (e.g., Microsoft Word, Excel, PowerPoint, etc.)., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Overview Are you ready to join a growing team? CTG is seeking a Technical Engineer III for our client to support enterprise infrastructure, identity services, and automation initiatives within a large-scale regulated environment. Location: Buffalo, NY Duration: 12 months Top Skills / Must-Haves • Microsoft Active Directory & Microsoft Entra ID (Azure AD), • Infrastructure engineering and system design, • Patch management and automation, • Proxy services, file systems, GPO, SIEM, • Enterprise troubleshooting and systems integration, • Design, implement, and support enterprise infrastructure solutions across identity, systems, and security platforms, • Work with senior engineers and technology leadership to develop scalable architecture and technical standards, • Support Microsoft Active Directory and Entra ID environments, • Drive patch management strategy and automation initiatives, • Manage and support proxy services, file systems, GPO, and SIEM integrations, • Translate business requirements into technical specifications and implementation plans, • Conduct system analysis, troubleshooting, and performance optimization, • Collaborate with vendors and coordinate external technical resources, • Develop and maintain architecture documentation, standards, and operational procedures, • Ensure compliance with security, risk, and regulatory requirements, • Mentor junior engineers and provide technical guidance, • Participate in audit remediation and internal control adherenceRequired Experience, • Minimum 6 years combined education and/or experience in systems engineering, architecture, or infrastructure roles, • Hands-on experience with Active Directory and Entra ID, • Experience with enterprise patching, automation, and infrastructure support, • Strong background in enterprise systems, troubleshooting, and integrationPreferred Qualifications, • Bachelor’s degree in Computer Science, Computer Engineering, or related field, • 6+ years in infrastructure engineering or systems architecture roles, • Advanced troubleshooting, analytical, and problem-solving skills, • Experience in large enterprise or regulated environments (financial services preferred), • Strong communication and stakeholder engagement skills, • Ability to work independently and in cross-functional teams CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Malti Jha at . Kindly forward this to any other interested parties. Thank you!