Trabajos Engineering en Chesapeake, Virginia - Page 5Crear alertas

Minimum Clearance Required to Start: Secret. Knowledge of Department of Defense (DoD) cybersecurity requirements and Navy IT standards. Ability to support digital twin and model-based systems engineering (MBSE) initiatives.

Support equipment level alterations made to equipment onboard a Navy vessel, test site, or within a system, such as upgrading existing equipment or systems, adjusting configurations, retrofitting components, or integrating new technologies. Provide support, maintenance, and a range of engineering, i

The Electrical/Cabling Engineer will report to the Senior Design Engineer/Integrator and will primarily be responsible for providing cabling support and preparing Cable Impact Statement and Cable Run Sheets to ensure that equipment is properly cabled for effective communication with other equipment

Completion of a course of studies accredited by the Accreditation Board for Engineers and Technology (ABET) for a fire protection engineering program from a college or university for a bachelor's or master's degree in mechanical engineering or fire protection engineering, supplemented by a considera

Position Overview* This position is intended for a licensed architect with at least 10 years of experience, capable of leading medium to large-scale projects with multiple complexities.The role involves project planning, coordination, and staff oversight, along with budget and schedule management.Re

Coordinate system engineering support of ship Engineering Change Proposal (ECP) activities and review all combat system related changes to ship documentation and impacts to combat system space arrangements, and Topside arrangements as requested by the Government. Client education requirements: BA/BS

The purpose of the conference is to present to the construction Contractor the administrative information necessary for execution of the construction contract, as well as to present a forum in which those personnel involved in the execution, construction management, and administration of the constru

Bachelor's Degree in Marine Engineering, Naval Architecture, Electrical Engineering, or Mechanical Engineering. We're looking for talented Senior Marine Engineers who will be responsible for coordinating and overseeing the maintenance, repair, and safe operations of all the engineering needs for ass

The Electrical/Cabling Engineer will report to the Senior Design Engineer/Integrator and will primarily be responsible for providing cabling support and preparing Cable Impact Statement and Cable Run Sheets to ensure that equipment is properly cabled for effective communication with other equipment

Must be eligible to obtain and maintain a DoD "Secret" security clearance with the possibility to upgrade to "Top Secret" if required. Engineering Technician III-VI (Electronic Security) (Job ID: 3802). Engineering Technician III - VI (Electronic Security).

Connect Talent Solutions, one of Hampton Roads fastest growing companies is seeking a dynamic and motivated Project Engineer with 0-3 years of experience to join our team and support our Project Manager in the successful execution of construction projects. The ideal candidate should possess a degree

At least ten (10) years of electrical experience in the operation, repair, maintenance and assessment of US Naval auxiliary equipment to include but not limited to five (5) years specialized hands-on experience, demonstrating an in depth knowledge of shipboard electrical control systems and electric

Mid Electrical Engineering Technician. Bachelor's level degree in Electrical/Electronics Engineering.

Are you interested in working on design and construction projects that impact our world? CDM Smith offers employees opportunities to delve into many aspects of electrical engineering, including the design of complex power systems, observation and construction services, and power system analyses, etc

You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. We offer competitive compensation, benefits and learning and development opportunities. Analyze and define security requirement

Basic qualifications for Entry-Level Engineer candidates include:. Bachelor of Science in an Engineering discipline, Engineering Technology or Construction Management, Construction Technology. Whiting-Turner is a national ENR Top 25 General Contractor looking for entry-level engineers to help manage

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist Manufacturing Engineering Job Code: 29843 Job Location: Norfolk, VA Schedule: 5/40 Job Description: L3Harris Technologies is seeing a Manufacturing Engineer in its Norfolk VA location. The Manufacturing Engineer will support the manufacture, production and test of military electromechanical equipment. They will ensure manufactured products meet technical, quality, cost, schedule and safety requirements. The Manufacturing Engineering Specialist works to improve manufacturing documentation, processes, workflows, test equipment and test procedures to optimize product manufacture and test efficiency as well as improve product/test yield. Essential Functions: \n • Ensures products meet technical, test and Naval qualification requirements. \n, • Troubleshoots and resolves hardware manufacturing, quality and test issues to support production schedules. \n, • Improves manufacturing processes, documentation, yield and test efficiency in collaboration with a multi-disciplined team. \n, • Translates engineering design requirements into manufacturing operations sheets, work instructions, tooling and test equipment, workflows and processes. \n, • Supports daily manufacturing areas with hands-on hardware troubleshooting and incorporation/creation of changes (Engineering Change Requests, Engineering Change Orders). \n, • Dispositions non-conforming material with root cause, corrective action and defect analysis as required to prevent recurrence. \n, • Provides real-time technical support to manufacturers and fabricators, in-house as well as the supply base. \n, • Supports the Refurbishment and Repair requirements and processing of Government Furnished Material (GFM) or Equipment (GFE). \n, • Reviews design drawings for manufacturability and cost (DFM, DFC). \n, • Works to achieve operational targets and KPIs. \n\n Qualifications: Bachelor's degree in science, Technology or Engineering and a minimum of 6 years' prior manufacturing engineering experience with military products. The ability to obtain and maintain a U.S. government issued security clearance is required. Preferred Additional Skills: \n • Strong multidisciplined engineering aptitude, analytical skills and problem-solving skills. \n, • Experience with Lean Manufacturing and Continuous Improvement activities \n, • Proficiency with CAD modeling tools, Labview software and/or C++ software programming. Familiarity with PCB layout software and Gerber files is a plus. \n, • Experience with technical drawing interpretation including hardware drawings, printed circuit boards, cable drawings, schematic diagrams and Geometric Dimensioning & Tolerancing. \n, • Experience with automated tooling, machining and programming. \n, • Familiarity with IPC-J-Std-001, IPC-A-610 and/or IPC/WHMA-A-620 \n, • Strong organization skills with the ability to manage multiple tasks simultaneously. \n, • Proficient use of Microsoft Office suite (Excel, PowerPoint, Word) \n\n L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Director of Engineering Norfolk Waterside Marriott.

Job Title: Mechanical Engineer Location: Norfolk, Virginia Responsibilities: As a fully competent Registered Professional Engineer, performs work involving the application of all conventional aspects of engineering to the functional area of the assignment. Exercises judgment in the independent evaluation, selection and substantial adaptation and modification of standard techniques, procedures, and criteria. Conceptualizes the initial design approach for major phases of large facilities type projects, or has overall responsibility for the engineering work. Plans, schedules, conducts or coordinates engineering work. Supervises the design and ongoing progress of a project, including the coordination of the project with City, State, and County officials, and other outside agencies. Resolves a variety of complex problems, (i.e., conflicting design requirements, difficult coordination requirements). Serves as a liaison between clients and agencies, subcontractors, and design teams. Reviews plans and prepares or reviews technical specifications, contract documents, and estimates. Participates in bidding and construction administration; observes project action on site. Supervises the work of less experienced engineers and/or technical support personnel assigned to the project. Performs other duties as assigned. Minimum Qualifications: BSME, BSEE, or BSAE required. PE License. Five to nine years of progressive experience. Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M- #LI- #DI- Ref: #404-IT Pittsburgh

Chesapeake, VA - 21310 - Field Engineer- Natural Gas.We construct the systems and facilities to transport the nation's cleanest burning energy resource.Southeast Connections offers complete construction services that include pipeline construction, installation, maintenance, repairs, stations, facili

A technical engineer in the Army plays a critical role in supporting the design, construction, and maintenance of military infrastructure and facilities.Their duties include conducting surveys and creating detailed blueprints and plans for various construction projects, such as buildings, roads, bri

We construct the systems and facilities to transport the nation's cleanest burning energy resource.Southeast Connections offers complete construction services that include pipeline construction, installation, maintenance, repairs, stations, facility modification and new construction.From Senior Mana

Our work has made us the strongest team in the small boat design space, and being part of DLBA means being at the top of your field. Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in

Must have a VMware, Windows, or Linux Operating System (OS) certification. Strong understanding of Linux operating systems especially Red Hat 6, 7, 8, and 9. Strong understanding of Linux filesystems and LVM.

Electrical Technician-US Norfolk, VA 3+ Month Contract Pay: 26.25/hr, W 2 Onsite Perform all routine, corrective and emergency maintenance activities to keep all commercial lighting and commercial electrical systems in working order. Diagnose problems and then repair/replace defective parts as required. Primary Responsibilities: • Provide and maintain a high quality of customer service to customer base., • Performs electrical maintenance and repair work; install/replace fixtures, switches, receptacles and wiring in compliance with current National Electric Code, • Inspect and test components of electrical systems, including transformers, transfer switches and switch gears, • Utilize blueprints, wiring diagrams and manufacturer’s installation manuals to complete assigned projects, • Respond quickly to trouble calls when a breakdown occurs. Communicate to management whether the problem can be corrected and whether business can continue as usual. If regular activities must be stopped, the electrician will have to estimate how long a shutdown will last and identify alternatives for operation., • Make periodic inspection for new and existing electrical components (120v, 208v, 240v, 277v and 480v three phase), including, but not limited to, wiring, conduit, service panels, breakers, contractors, relays, timers and other associated controls., • EMT Conduit bending and installation, connecting circuits and breakers, replacing fuses and fuse boxes, installing receptacles, switches, light fixtures and testing voltages. Motor and control skills and pump systems., • Operates a variety of standard power tools, equipment and trenchers in electrical installations, maintenance and repair activities on a regular basis., • Repair and maintain lightning protection systems., • Maintains records and logs as needed., • Provides maintenance schedule and material/parts research, parts ordering and shop stock inventory to support routine maintenance and equipment replacement as required. Qualifications: • Completed Secondary Education, • Completed vocational school with Electrical Certification, • Experience with commercial electrical work.

Job Description Deadline Date: Wednesday 19 November 2025 Requirement: SATCOM Engineering Support Services Location: Norfolk, VA, US Full Time On-Site: Yes Time On-Site: 100% Period of Performance: 2026 Base: As soon as possible but not later than 05 January 2026 – 31 December 2026, with the possibility to exercise following options: • 2027 Option: 01 January 2027 – 31 December 2027, • 2028 Option: 01 January 2028 – 31 December 2028 Required Security Clearance: NATO SECRET 1 PROJECT SPECIFICS 1. Scope This Statement of Work (SOW) defines the provision of specialized SATCOM Engineering Support Services to assist NATO entities in the definition, assessment, and evolution of future SATCOM capabilities. The Contractor shall provide expert engineering services to support the strategic planning, design, and definition of NATO SATCOM systems, ensuring alignment with operational requirements, interoperability standards, and emerging technologies within the Alliance’s communication and space domains. All work shall be performed as service-based deliverables, with measurable outputs and documented technical artefacts produced under NCIA’s supervision and in close coordination with Allied Command Transformation (ACT), ACO, and other NATO stakeholders. 2. Objectives The objective of this engagement is to provide engineering and analytical support to ongoing NATO activities related to the definition, harmonization, and modernization of SATCOM capabilities, including: • Assessment of current and future SATCOM architectures;, • Identification of capability gaps and dependencies;, • Development of engineering baselines and system-level requirements;, • Analysis of interoperability with NATO, national, and commercial SATCOM assets;, • Technical input to strategic planning, feasibility studies, and decision-making documents. 3. Tasks and Activities The Contractor shall perform, but not be limited to, the following tasks: 3.1 Engineering Analysis and Studies • Conduct technical assessments of SATCOM networks, terminals, and anchoring systems across NATO strategic, operational, and tactical domains;, • Support system architecture definition, including integration of MILSATCOM and COMSATCOM resources;, • Perform trade-off and feasibility analyses addressing performance, resilience, spectrum efficiency, and cost-benefit aspects;, • Contribute to the development of future-oriented SATCOM system concepts, including Low Earth Orbit (LEO) integration, software-defined payloads, and multi-orbit architectures;, • Create Analysis of Alternative documents for different options considered. 3.2 Requirements and Interface Definition • Develop and maintain system-level functional and technical requirements for future SATCOM systems and related ground infrastructure;, • Support interoperability and standardization activities (e.g., STANAGs, NATO interoperability profiles, SATCOM reference architectures);, • Provide interface control documentation (ICD) and configuration baselines for engineering reference. 3.3 Capability and Architecture Modelling • Contribute to modelling and simulation of SATCOM service delivery architectures and integration with existing Networks;, • Assess the impact of emerging technologies such as AI-driven resource management, optical links, and protected waveforms;, • Provide recommendations for technology insertion and obsolescence mitigation. 3.4 Stakeholder Coordination and Reporting • Liaise with ACT, ACO, and NCIA technical authorities, providing engineering inputs and consolidated documentation;, • Prepare technical briefings, reports, and data packages supporting NATO capability planning;, • Participate in workshops, technical meetings, and industry engagement events as required. 2 DELIVERABLES The contractor shall produce the following deliverables: Deliverable D1: Engineering Analysis Report(s) on SATCOM architectures, capabilities, and integration options, Analysis of alternatives documents Frequency: Quarterly or upon request Deliverable D2: Draft and final versions of system-level requirements and interface documents Frequency: As scheduled Deliverable D3: Technical briefings, presentations, and meeting minutes Frequency: As required Deliverable D4: Contribution to capability assessment documentation and technology surveys Frequency: As required 3 SERVICE KPIs AND PENALTIES The penalties defined below will apply to the payment amount based on the performance results measured through Annex B - Monthly Service Performance Report Objective KPI01: Deliverables submitted on schedule Standard: % of Deliverables Performance Threshold: 99.9% of the measured period Penalty (if under performance threshold): 1% Objective KPI02: Technical quality of documentation (clarity, completeness, accuracy) Standard: % of Deliverables Performance Threshold: 99.9% of the measured period Penalty (if under performance threshold): 1% Objective KPI03: Responsiveness to tasking and change requests Standard: % of Completion Performance Threshold: 100% of the scheduled tasks Penalty (if under performance threshold): 1% Objective KPI04: Contribution to stakeholder coordination Standard: % of Completion Performance Threshold: 99.9% of the measured period Penalty (if under performance threshold): 1% Objective KPI05: Customer satisfaction (feedback from ACT/NCIA leads) Standard: 4/5 average rating Performance Threshold: 4/5 average rating Penalty (if under performance threshold): 1% 4 PAYMENT MILESTONES 1. The payment shall be dependent upon successful acceptance of the Monthly Service Performance Report Acceptance (Annex B) signed by the SATCOM Operations Manager., 2. Invoices shall be accompanied by the Monthly Service Performance Report (Annex B) signed by the SATCOM Operations Manager., 3. Payment schedule will be according to payment milestones upon completion. Upon completion and validation of each milestones and at the end of the monthly milestone, following the acceptance of the Monthly Service Performance Report. Payments will be made according to the following schedule: 2026 BASE performance – 05th of January 2026 (tentative) to 31 December 2026 Associated Deliverables: Provision of SATCOM System Management Services Completion Deadlines: 31 Jan, 28 Feb, 31 Mar, 30 Apr, 31 May, 30 Jun, 31 Jul, 31 Aug, 30 Sep, 31 Oct, 30 Nov, 31 Dec Monthly Payment Amount: 1/12 total cost for calendar year Monthly Payment Document: Completion of milestone shall be accompanied documented Monthly Service Performance Report Acceptance (Annex B) signed by the Station Commander or authorized point of contact and the Contractor. This document will accompany the invoice. The deadline’s split is calculated considering a starting date 5th of January 2026. This will be adjusted based on actual starting date. 2027, 2028 OPTIONS: 01 JANUARY TO 31 DECEMBER 2027/2028 Associated Deliverables: Provision of SATCOM System Management Services Completion Deadlines: 31 Jan, 28 Feb, 31 Mar, 30 Apr, 31 May, 30 Jun, 31 Jul, 31 Aug, 30 Sep, 31 Oct, 30 Nov, 31 Dec Monthly Payment Amount: 1/12 total cost for calendar year Monthly Payment Document: Completion of milestone shall be accompanied documented Monthly Service Performance Report Acceptance (Annex B) signed by the Station Commander or authorized point of contact and the Contractor. This document will accompany the invoice. 5 PRACTICAL ARRANGEMENTS Place of Performance: Work will be conducted primarily on-site in ACT Norfolk USA in designated as Class I and II Security Area. Travel Requirement: Travel may be required to other Purchasers’ locations on exceptional basis. Travel arrangements will be the responsibility of the contractor and the expenses will be reimbursed in accordance with Article 5.5 of AAS Framework Contract and within the limits of the NCIA Travel Directive. Hours of Operation: The Contractor is expected to follow the Purchaser’s working hours — Monday to Thursday from 08h30 until 17h30 and Friday from 08h30 until 15h30 (USA Eastern time zone). Reporting: The Contractor shall produce Monthly Service Performance Report completion reports (format: e-mail update), which include details of activities performed, the list of the KPI completion and penalties if it is applicable. Safety and Compliance and other arrangements: • Follow all safety protocols to prevent accidents and injuries., • Ensure compliance with agency, industry standards and regulations., • The Contractor shall manage and be responsible for all activities mentioned in the Section 2., • Install and operate the equipment following the manufacturer’s requirements., • Minimize the impact to the service during the execution of the work., • Bring immediately to the attention of the Purchaser Point of Contact on-site any issues preventing the execution of the work., • The Contractor shall: Strive to lower the rotation of Contractor’s personnel and maintain the same staff Contractor working under this SoW. [See Requirements] Requirements SERVICE DELIVERY REQUIREMENTS One resource is required to deliver the services under this SOW, with the below requirements: The Contractor shall fulfil the following requirements: • Security Clearance: The Contractor shall possess valid NATO SECRET Personal Security Clearances for the duration of the Contract performance., • Education: University Degree in Telecommunications, Electronics, or a related field, with at least two years of post-related experience; or Higher Vocational Training with a minimum of five years of post-related experience., • SATCOM Expertise: Minimum of three years of practical experience in SATCOM systems, including UHF, SHF, HF and EHF systems., • Technical Expertise: Familiarity with modern military communication networks, including interfaces, protocols, and experience with SATCOM Operations., • Deep knowledge of SATCOM architecture principles, including link budget analysis, modulation schemes, error correction coding, satellite network topologies, • Strong understanding of RF engineering, antenna systems, propagation modelling in SATCOM bands, cybersecurity architecture for SATCOM, including encryption, • Familiarity with SATCOM related standards, such as DVB-S2, DVB-S2X, MIL-STD-188, experience in Software Defined Networking (SDN) in SATCOM, • Customer Service and Incident Management: Familiarity in service management (incident, problem management, etc.) and a customer-focused approach in a control centre environment., • NATO Environment: prior experience working in a NATO or multinational military setting, with a solid understanding of NATO operational standards and protocols.

Job Description we are looking for someone to work on small engines, construction and landscapeing equiptment

Job DescriptionSalary: $83,000 - $99,000 per year Project Design Engineer SCADA Emphasis Renewable Energy Norfolk, VA Folsom, CA The Opportunity Join our Engineering and Design team as a Project Design Engineer with an emphasis on SCADA to work on exciting renewable energy projects across the US. We are growing our team and seeking a skilled engineer for the design and development of systems, panels, components, and equipment (mechanical or electrical) using AutoCAD software. The Team You will report to our Director of Engineering and Design and work in collaboration with a small team of 3-5 engineers. You will also collaborate across the organization with our Systems Integration Engineers, Network Engineers, Project Managers, Production Team, and other stakeholders. The Environment The team works in a flex-based model, based on the option for remote work 2 days/week. Some travel to job sites will be required on occasion. There are two openings for this position, one in our Folsom, CA headquarter office and one in our Norfolk, VA production facility. Growth & Development In this role you will build cross-departmental relationships, elevate your knowledge of solar and renewable energy, and work in collaboration with the brightest minds in renewable technology. Your Key Contributions • Develop project/product designs and drawings, maintain revisions, modify as required and ensure all drawings comply with engineering drawing practices, standards and with applicable client or regulatory guidelines., • Prepare, schedule, coordinate and monitor the assigned engineering projects., • Read, create, and detail line diagrams and schematics for fabrication., • Meet design deadlines and communicate any issues with appropriate parties., • Perform engineering calculations such as UPS and battery bank sizing, fiber optic link losses, enclosure heating and air conditioner sizing., • Evaluate and specify products to meet the technical requirements of the project., • Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications., • Create mark-ups to communicate revisions and corrections with CAD designers., • Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support., • Bachelor's degree in engineering, required., • Minimum of 2-5+ years SCADA-related experience and/or training preferred., • University graduate from an engineering curriculum, • Proficient with AutoCAD 2D, • Understanding of basic AC/DC electrical theory as it relates to design drawing and applicable electrical codes and standards, • Possess excellent verbal and written skills, • Ability to analyze and solve complex problems About Trimark Trimark is an industry leader in the movement towards a greener grid and a cleaner future. We design systems and provide services to enable the integration of large-scale renewable power plants into the power grid. Our products are at the forefront of generating dispatchable power from renewable plants by combining the intermittent renewable resource with energy storage. We manage thousands of renewable energy sites for industry-leading clients and support regulatory and operational compliance solutions for complex systems associated with critical infrastructure electric loads, power generation, water infrastructure and other similar applications. Trimark provides systems and servicesthat power producers, utility providers, and independent load serving entities need to participate in organized electric markets, as well as the information ISOs and Balancing Authorities need to manage the bulk electric grids. Our team designs systems from concept to commissioning, including system and network architecture, software development, component assembly,technology configuration,installation, testing, certification, ongoing support, and maintenance. Benefits • Work-Life Synergy, • Paid Vacation, • Paid Sick Leave, • Paid Holidays, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Plan, • Flexible Spending Account, • 401K Match, • Student Loan Assistance, • 529 Savings Plan, • Referral Bonus, • Company Paid Life Insurance, • Voluntary Life Insurance, • Long Term Disability Insurance, • Accident Insurance, • Critical Illness Insurance, • Identity Theft Protection, • Legal Insurance, • Pet Discounts, • Employee Assistance Program, • Onsite Gym Access (Folsom office) Legal Notes Equal Opportunity Statement Trimark is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all people involved in Company operations and prohibits unlawful discrimination by any employee of the Company, including supervisors and coworkers. E-Verify Statement Trimark will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Work Authorization This role is Not Eligible for sponsorship by Trimark, including future sponsorship. Candidates must reside in the United States. Pay Transparency Compensation is based on market rate, job level, job related knowledge, skills, experience, education, and certifications. Candidate Safety Trimark engages in a structured hiring process during which you will meet with multiple team members. We do not issue offers based on email contact and will not ask for your personal or sensitive information prior to an accepted offer. Communications from our talent team will come from the trimarkassoc.com domains. Unsolicited Candidate Referrals Trimark values our strategic partnerships with our agency partners who may supplement our internal recruitment teams efforts from time to time. To submit candidates for consideration, agency partners must have an executed agreement signed by Trimarks president and a job specific requisition. Without such agreements in place, Trimark will not pay a fee to any agency. Unsolicited referrals from any source other than directly from a candidate will be considered Trimark property and will be considered to have been referred by the agency free of any charge or fee. This includes resumes, partial resumes, candidate profiles, and candidate details or information. Trimark engages in a structured hiring process during which you will meet with multiple team members. We do not issue offers based on email contact and will not ask for your personal or sensitive information prior to an accepted offer. Communications from our talent team will come from the trimarkassoc.com domains.